百晓学者学者目录

武湛君

大连理工大学工业装备结构分析国家重点实验室

精选作品

期刊论文

  1. 杨雷,张木子,陈春宇,张书锋,武湛君(2026). 航天运载器复合材料贮箱低温力学行为及渗漏性研究进展. 《复合材料学报》.
  2. 谭添亮,李世超,武湛君(2026). Nano-SiO2/短切碳纤维对环氧结构胶超低温粘接性能的影响. 《强度与环境》.
  3. 孙亮,朱明睿,李建乐,杨雷,徐浩,武湛君(2026). 力热耦合环境下基于BP神经网络的复合材料舵面结构变形重构. 《复合材料学报》.
  4. 郭冰霜,沈佳怡,周国泰,高东岳,武湛君(2026). 基于主成分分析与路径密度补偿的超声导波多损伤概率成像. 《应用声学》.
  5. 柳敏静,杨雷,徐浩,谭德阳,武湛君(2026). 机翼结构应变测量实验教学系统研发与应用. 《实验室科学》.
  6. 王博睿,高东岳,顾海洋,丁梦珂,武湛君(2026). 基于GWO-BP神经网络的CFRP疲劳损伤超声导波监测算法. 《兵器装备工程学报》.
  7. Xuanxuan Huang, Yaohan Hu, Yi Luo, Muwei Shu, Zewen Yan, Jiaxi Zhang, Tao Sun, Lei Yang, Zhanjun Wu (2026). Magneto-dielectric synergy: one-pot synthesis of Fe 3 O 4 nanoparticle-decorated graphene oxide for high performance electromagnetic wave absorption. Journal of Materials Chemistry C.DOI
  8. Lanmeng Zhang, Wei Qiao, Tao Sun, Yue Qian, Zhanjun Wu (2026). Cation-Engineered Co–Fe Spinel/rGO Composites with Tuned Magnetocrystalline Anisotropy for Wideband Microwave Absorption. Composites Part B: Engineering.DOI
  9. Lanmeng Zhang, Wei Qiao, Tao Sun, Yue Qian, Zhanjun Wu (2026). Corrigendum to “Cation-engineered Co–Fe Spinel/rGO composites with tuned magnetocrystalline anisotropy for wideband microwave absorption” [Compos. Part B: Eng. 324 (2026), 113794]. Composites Part B: Engineering.DOI
  10. Dongyue Gao, Jiayi Shen, Bingshuang Guo, Jun Li, Zhanjun Wu (2026). Multiform damage detection via ultrasonic guided wave-machine vision heterogeneous data fusion based on fuzzy D-S evidence theory. Structural Health Monitoring.DOI
  11. Xupeng Ma, Pengpeng Wang, Shikun Zheng, Zhanjun Wu (2026). Optimization design of composite material rods based on surrogate model and thermo-mechanical coupling analysis. Journal of Physics Conference Series.DOI
  12. Yeqing Liu, Lin Zhang, Zhongbao Wang, Ying Zhang, Haiyang Gu, Ruoxi Fan, Jia Yan, Jialiang Li, Jialiang Li, Duo Chen, Shichao Li, Zhanjun Wu (2026). Effect of polyether sulfone on mechanical properties of epoxy resin in wide service -environment temperature range. Composites Communications.DOI
  13. Xu Zeng, Deshuang Deng, Shuyi Ma, Zhanjun Wu, Zhengyan Yang, Lei Yang, Yinan Shan (2026). Design of sensor cluster configurations and impact localization in composite plates using deterministic maximum likelihood. Ultrasonics.DOI
  14. Deshuang Deng, Xu Zeng, Qingxin Pang, Shengbao Bai, Tong Tian, Hongjuan Yang, Zhengyan Yang, Zhengyan Yang, Zhengyan Yang, Lei Yang, Zhanjun Wu (2026). Simultaneous impact localization and energy estimation in composite structures using ensemble learning and approximate Bayesian computation. Thin-Walled Structures.DOI
  15. Hongjuan Yang, Jitong Ma, Zhengyan Yang, Tong Tian, Deshuang Deng, Dongyue GAO, Shuyi Ma, Lei Yang, Zhanjun Wu (2026). LSWNet: A physics-informed neural network for ultrasonic wavefield prediction and elastic constant inversion in unidirectional CFRP. Ultrasonics.DOI
  16. 陈春宇,王剑锋,张木子,柳敏静,杨雷,武湛君(2025). 预应力及超低温循环作用下碳纤维/环氧树脂复合材料微裂纹行为. 《复合材料学报》.DOI
  17. 王靖华,刘业青,李曼曼,李世超,武湛君(2025). 室温-超低温热循环处理下复合材料GⅠC/GⅡC性能演化规律及影响机制研究. 《强度与环境》.DOI
  18. 杨雷,武湛君(2025). 飞行器复合材料结构冲击监测与定位关键技术. 《中国力学大会-2025摘要集(第四册)》.DOI
  19. 丁梦珂,高东岳,顾海洋,王博睿,周国泰,武湛君(2025). 基于BO-CNN模型的复合材料疲劳损伤超声导波监测方法. 《机械工程学报》.
  20. 陈汕,孙杰,李家亮,谭添亮,李梓睿,顾海洋,彭聪,孙涛,李世超,武湛君(2025). 介孔SiO2对环氧树脂超低温力学性能及树脂/碳纤维界面性能的影响. 《复合材料学报》.DOI
  21. 陈泓志,高畅,徐浩,武湛君(2025). 环氧树脂体系液氢渗透行为分子动力学模拟. 《功能材料》.
  22. Runze Zhang, Zudian Liang, Yan Dong Jia, Shufeng Zhang, Zhanjun Wu, Lei Yang (2025). Study on the Damage and Heat Generation Mechanism of Epoxy Resin During Ultra-low Temperature Impact. Acta Mechanica Solida Sinica.DOI
  23. Xiaoxi Qu, Fuqiang Ma, Shiyuan Zhao, Lei Yang, Zhanjun Wu, Bingzhi Chen (2025). Analysis of the Influence of Macro-Bending Loss in Single-Mode Optical Fibers on OFDR Signal Quality. Sensors.DOI
  24. Duo Chen, Miao Yu, Dongwei Xu, Shichao Li, Tengteng Li, Cong Xiang Peng, Xiaoqin Guo, Zhanjun Wu (2025). Micro cross-linking strategy with dynamic covalent bond for high-performance epoxy-based thermoplastic polymer and polymer composites. Composites Part A Applied Science and Manufacturing.DOI
  25. Haosen Gu, Hongjuan Yang, Zhengyan Yang, Shuyi Ma, Jiaqi Zhang, Zhanjun Wu, Yinan Shan (2025). Multiple defects localization method for multi-directional CFRP laminates based on acoustic ray tracing and kernel density estimation algorithm. Applied Acoustics.DOI
  26. Yuhang Liu, Cong Xiang Peng, Ruoxi Fan, Zhanjun Wu (2025). Trifluoromethyl-containing phthalonitrile modified epoxy thermoset with improved flame retardancy and thermal stability. Polymer Degradation and Stability.DOI
  27. Guang Tian, Hongjuan Yang, Zhengyan Yang, Zhengyan Yang, Zhanjun Wu, Lei Yang (2025). Imaging delamination damage in multidirectional CFRP laminates using batch synthetic aperture-multiple focalization method. Composite Structures.DOI
  28. Lei Yang, Jianfeng Wang, Qun Wang, Pengfei Xiao, Junfu Gao, Zhanjun Wu (2025). Preparation and performance characterization of intelligent woven composites embedded with distributed fiber optic sensors. Composites Communications.DOI
  29. Jianle Li, Dongliang Wang, M. Zhu, Jianqiang Li, Hao Xu, Lei Yang, Zhanjun Wu (2025). Strain Monitoring of Reusable Launch Vehicle Four-Legged Landing System Using Fiber Bragg Grating Sensors. Journal of Spacecraft and Rockets.DOI
  30. Tong Tian, Hongjuan Yang, Zhengyan Yang, Hao Guan Xu, Zhanjun Wu, Lei Yang (2025). Damage identification of adhesive bonded structures based on ultrasonic guided waves and neural network. Nondestructive Testing And Evaluation.DOI
  31. Shuai Chen, Hao Guan Xu, Shiyuan Zhao, Deyang Tan, Ze Dong, Xiaoxi Qu, Lei Yang, Zhanjun Wu (2025). Fatigue crack prediction based on distributed optical fiber sensing data and dynamic Bayesian network. Measurement.DOI
  32. Chang Gao, M. Zhu, Caidong Shi, Hongzhi Chen, Rubin Zhu, Hao Guan Xu, Xufeng Dong, Zhanjun Wu (2025). Machine learning-aided reparameterization of a united atom model for chemically intricate polymer networks subjected to large tensile deformation. Computational Materials Science.DOI
  33. Lei Yang, Jianfeng Wang, Chun‐Yu Chen, Hao Guan Xu, Zhengyan Yang, Zhanjun Wu (2025). Microscopic modeling and failure mechanism study of fiber reinforced composites embedded with optical fibers. Results in Materials.DOI
  34. Jitong Ma, Sen Zhao, Zhengyan Yang, Wei Bao, Jie Wang, Zhanjun Wu (2025). MCAGN: Multilayer Coupled Attention Graph Networks for Composites’ Damage Detection. IEEE Sensors Journal.DOI
  35. Jinghua Wang, Zhishen Yin, Jie Sun, Yeqing Liu, Ruoxi Fan, Jialiang Li, Jialiang Li, Duo Chen, Jia Yan, Shichao Li, Zhanjun Wu (2025). Investigation on the synergistic effect mechanism of hydroxyl-terminated PES/Nano-SiO2 on the mechanical properties of epoxy resin at ultra-low temperatures. Composites Communications.DOI
  36. Deshuang Deng, Xu Zeng, Yang Yu, Yu Yang, Sheng Zhang, Hao Xu, Lei Yang, Zhengyan Yang, Lei Yang, Zhanjun Wu (2025). Data fusion based impact localization on aircraft composite structures using Bayesian estimation and weighted averaging. Mechanical Systems and Signal Processing.DOI
  37. Jianle Li, Hanke Li, Hao Yang, Tengteng Li, Liang Sun, Haijun Peng, Hao Guan Xu, Zhanjun Wu (2025). Deformed shape reconstruction for thin-walled composite aircraft wings with multi-cell closed sections. Composite Structures.DOI
  38. Xu Zeng, Deshuang Deng, Hongjuan Yang, Zhengyan Yang, Lei Yang, Zhanjun Wu (2025). Hybrid DoA–TDoA Method for Impact Localization on Thin-Walled Structures Using Sensor Clusters. IEEE Sensors Journal.DOI
  39. Tong Tian, Wentao Liu, Hongjuan Yang, Zhengyan Yang, Zhengyan Yang, Zhengyan Yang, Hao Xu, Lei Yang, Zhanjun Wu (2025). Spatiotemporal parallel network for damage localization regression in carbon fiber reinforced composite plates using multifrequency guided waves. Measurement.DOI
  40. 李娟子,严佳,陈铎,崔运广,高畅,黄昊,武湛君(2024). 含磷液氧相容环氧树脂的热降解行为. 《复合材料学报》.
  41. 林奎旭,张佳奇,杨正岩,杨雷,武湛君(2024). 基于超声导波相位延迟的胶接修补结构脱粘监测. 《强度与环境》.
  42. 曾旭,邓德双,杨红娟,杨正岩,马书义,杨雷,武湛君(2024). 航空结构低速冲击监测技术研究进展. 《航空学报》.
  43. 刘新,尹文轩,陈铎,侯永博,张露,武湛君(2024). 热塑性环氧树脂合成及增韧低温复合材料. 《航空学报》.
  44. 邓德双,曾旭,杨正岩,杨雷,武湛君(2024). 基于贝叶斯估计和数据融合的复合材料结构冲击定位. 《仪器仪表学报》.DOI
  45. 武湛君,董珊珊,李建乐,朱明睿,张仕承,刘海涛,孙亮,李汉克,董孜劢,徐浩(2024). 基于分布式光纤传感与U-Net网络的复合材料分层损伤定量识别方法. 《航空制造技术》.
  46. 武湛君,曾旭,邓德双,杨正岩,杨红娟,马书义,杨雷(2024). 基于自适应时间反转聚焦的加筋复材板冲击定位. 《复合材料学报》.
  47. 陈志姣,彭聪,武湛君(2024). 环氧树脂/苯并噁嗪共聚物的固化行为及其耐热性. 《塑料工业》.
  48. 杨雷,邓德双,田广,高宗波,包笑飞,武湛君(2024). 基于误差函数的复材加筋板概率成像冲击定位. 《振动、测试与诊断》.
  49. 田童,李建乐,邓德双,曾旭,林奎旭,董珊珊,杨雷,徐浩,杨正岩,武湛君(2024). 飞行器结构健康监测技术研究进展. 《航空制造技术》.
  50. 徐浩,王中枢,马寅魏,李建乐,李腾腾,张松,武湛君(2024). 基于分布式光纤的蜂窝夹层结构脱粘损伤监测. 《压电与声光》.
  51. Wei Bao, Jitong Ma, Zhengyan Yang, Si‐Nian Jin, Moran Ju, Hongpeng Zhang, Jie Wang, Zhanjun Wu (2024). ConvMPAnet: A Novel End-to-End Lightweight Damage Localization Framework Under Heavy Noise in Composite Structures. IEEE Sensors Journal.DOI
  52. Zhijiao Chen, Cong Xiang Peng, Shichao Li, Zhanjun Wu, Tao Sun (2024). The influence of phthalonitrile monomer containing oxazine ring on the properties of epoxy/amine system: Curing behavior and thermal stability. Journal of Applied Polymer Science.DOI
  53. Shuai Chen, Hao Xu, Zhanjun Wu (2024). Digital twin method for predicting the critical load of debonding damage in honeycomb sandwich structures based on distributed optical fiber sensor and Dynamic Bayesian Network. Journal of Physics Conference Series.DOI
  54. Tong Tian, Lei Yang, Wentao Liu, Yu Yang, Hao Xu, Zhengyan Yang, Jiaqi Zhang, Zhanjun Wu (2024). Two-stage residual networks for damage identification and location of stiffened composite panel based on guided waves. NDT & E International.DOI
  55. Zhengyan Yang, Rui Xu, Hongjuan Yang, Jitong Ma, Lei Yang, Hongfei Guo, Hongpeng Zhang, Zhanjun Wu (2024). Modeling and designing of a phased array comprising piezoelectric stack transducer for ultrasonic Lamb wave-based damage detection. Structural Health Monitoring.DOI
  56. Shuai Chen, Yinwei Ma, Zhongshu Wang, Minjing Liu, Zhanjun Wu (2024). Fatigue Crack and Residual Life Prediction Based on an Adaptive Dynamic Bayesian Network. Applied Sciences.DOI
  57. Xiaoxi Qu, Shiyuan Zhao, Fuqiang Ma, Jianle Li, Hanke Li, Zhengyan Yang, Hao Guan Xu, Lei Yang, Zhanjun Wu (2024). Strain Monitoring and Installation Adjustment of Satellite–Rocket Connection Device Based on Distributed Optical Fibers. Photonics.DOI
  58. Shiyuan Zhao, Yang Liu, Lei Yang, Hao Xu, Yinan Shan, Zhanjun Wu (2024). Improved evaluation model for macro-bending loss and power variation in single-mode fiber. Optics Communications.DOI
  59. Qiang Chen, Qingguo Sun, Jia Yan, Yunguang Cui, Lufeng Yang, Xiaojing Yang, Zhanjun Wu (2024). Development and Recent Progress of Hoses for Cryogenic Liquid Transportation. Polymers.DOI
  60. Deshuang Deng, Xu Zeng, Zhengyan Yang, Yang Yu, Sheng Zhang, Shuyi Ma, Hao Xu, Lei Yang, Zhanjun Wu (2024). Multi-frequency probabilistic imaging fusion for impact localization on aircraft composite structures. Structural Health Monitoring.DOI
  61. Yuan Ma, Minjing Liu, Tengteng Li, Alfred Strauß, Maosen Cao, Hao Guan Xu, Zhanjun Wu (2024). Real-time damage identification in composite structures based on pseudo excitation (PE) approach and fiber Bragg grating (FBG) sensor arrays. Journal of Vibroengineering.DOI
  62. Hongjuan Yang, Zhengyan Yang, Zhengyan Yang, Zhengyan Yang, Sitong Lu, Yinan Shan, Jitong Ma, Lei Yang, Zhanjun Wu (2024). Ultrasonic imaging of delamination in thick CFRP laminates using an energy-compensation reverse time migration method. Ultrasonics.DOI
  63. Xiaoxi Qu, Jianle Li, Yinan Shan, Zhengyan Yang, Lei Yang, Hao Guan Xu, Minjing Liu, Zhanjun Wu, Shiyuan Zhao (2024). Various static loading condition monitoring of carbon fiber composite cylinder with integrated optical fiber sensors. Optical Fiber Technology.DOI
  64. Shuai Chen, Yinwei Ma, Zhongshu Wang, Zongmei Xu, Song Zhang, Jianle Li, Hao Xu, Zhanjun Wu (2024). A Modified Principal Component Analysis Method for Honeycomb Sandwich Panel Debonding Recognition Based on Distributed Optical Fiber Sensing Signals. Structural durability & health monitoring.DOI
  65. 张松,李建乐,柳敏静,徐浩,杨雷,武湛君(2023). 基于分布式光纤静态应变测量的蜂窝夹层板脱粘损伤模型修正方法. 《大连理工大学学报》.
  66. 柳敏静,杨雷,徐浩,武湛君,周文雅(2023). 面向新工科的飞行器设计与工程专业课程的教学实践——以“飞行器结构学”课程为例. 《第五届全国高等学校航空航天类专业教育教学研讨会论文集》.
  67. 袁玉环,左进霞,彭聪,武湛君(2023). 聚氨酯/纳米SiO2改性碳纤维增强环氧树脂复合材料界面性能. 《复合材料学报》.
  68. 杨红娟,杨正岩,杨雷,单一男,林奎旭,武湛君(2023). 碳纤维复合材料损伤的超声检测与成像方法研究进展. 《复合材料学报》.
  69. 唐蓝天,徐浩,严佳,高畅,李娟子,武湛君(2023). 基于DFT的液氧相容改性环氧树脂的化学特性研究. 《功能材料》.
  70. Jitong Ma, Jing Yin, Zhengyan Yang, Hongjuan Yang, Zhanjun Wu (2023). ShuffleFormer: An efficient shuffle meta framework for automatic modulation classification. Physical Communication.DOI
  71. Mutian Hu, Jitong Ma, Zhengyan Yang, Jie Wang, Zhanjun Wu (2023). Multi-Component Feature Extraction for Few-Sample Automatic Modulation Classification. IEEE Communications Letters.DOI
  72. Hongjuan Yang, Lei Yang, Lei Yang, Lei Yang, Zhengyan Yang, Yinan Shan, Haosen Gu, Jitong Ma, Xu Zeng, Tong Tian, Shuyi Ma, Zhanjun Wu (2023). Ultrasonic detection methods for mechanical characterization and damage diagnosis of advanced composite materials: A review. Composite Structures.DOI
  73. Yunguang Cui, Jia Yan, Juanzi Li, Duo Chen, Zhenyu Wang, Wenxuan Yin, Zhanjun Wu (2023). Cryogenic Mechanical Properties and Stability of Polymer Films for Liquid Oxygen Hoses. Polymers.DOI
  74. Zhengyan Yang, Hongjuan Yang, Tong Tian, Deshuang Deng, Mutian Hu, Jitong Ma, Dongyue Gao, Jiaqi Zhang, Shuyi Ma, Lei Yang, Hao Guan Xu, Zhanjun Wu (2023). A review on guided-ultrasonic-wave-based structural health monitoring: From fundamental theory to machine learning techniques. Ultrasonics.DOI
  75. Jitong Ma, Mutian Hu, Zhengyan Yang, Hongjuan Yang, Shuyi Ma, Hao Guan Xu, Lei Yang, Zhanjun Wu (2023). An Efficient Lightweight Deep-Learning Approach for Guided Lamb Wave-Based Damage Detection in Composite Structures. Applied Sciences.DOI
  76. Hongjuan Yang, Jian Li, Xiaoxiao Tian, Lei Yang, Zhengyan Yang, Shuyi Ma, Zhanjun Wu (2023). Parameter inversion and target localization in layered media containing solids based on acoustic ray tracing method. Measurement.DOI
  77. Zhengyan Yang, Jiaqi Zhang, Hao Guan Xu, Lei Yang, Shuyi Ma, Zhanjun Wu (2023). Phased Array System for Damage Detection in Plate-Like Structures Based on Single Lamb Wave Mode Extraction. Journal of Aerospace Engineering.DOI
  78. 牛慕绮,严佳,徐浩,武湛君(2022). 基于分子动力学的ODOPB环氧树脂体系微观破坏行为摸拟. 《复合材料学报》.
  79. 徐浩,王中枢,马寅魏,张佳奇,李建乐,范兴华,武湛君(2022). 基于超声导波和机器学习的蜂窝夹层结构脱黏诊断. 《无损检测》.
  80. 陈帅,黄念,李建乐,张佳奇,李腾腾,徐浩,武湛君(2022). 基于分布式光纤传感信号的结构损伤识别主成分分析方法. 《实验力学》.
  81. 高畅,董旭峰,严佳,徐浩,武湛君(2022). 液氧相容改性环氧树脂体系低温力学性能分子动力学模拟. 《功能材料》.
  82. 牛慕绮,严佳,徐浩,武湛君(2022). 基于分子动力学的ODOPB环氧树脂体系微观破坏行为摸拟. 《中国力学大会-2021+1论文集(第三册)》.DOI
  83. 范兴华,张佳奇,武湛君(2022). 基于超声导波传播特性分析和传播方向控制的含弯头管道损伤检测. 《中国力学大会-2021+1论文集(第四册)》.DOI
  84. 徐浩,王中枢,马寅魏,李腾腾,李建乐,张松,武湛君(2022). 基于逆有限元的蜂窝板结构形状传感研究. 《沈阳航空航天大学学报》.
  85. Duo Chen, Juanzi Li, Wenxuan Yin, Yuhuan Yuan, Yunguang Cui, Shichao Li, Minjing Liu, Cong Xiang Peng, Xin Liu, Jinrui Ye, Zhanjun Wu (2022). Fully recyclable and high-performance carbon fiber composites based on thermoplastic epoxy polymer. Composites Communications.DOI
  86. Hao Guan Xu, Chang Gao, Zhaoxu Meng, Ao Wang, Sinan Keten, Zhanjun Wu (2022). Atomistic investigation of fracture mechanisms in phosphorus-functionalized epoxy resins. International Journal of Mechanical Sciences.DOI
  87. Lei Yang, Yifan Huang, Kehai Liu, Zhanjun Wu, Qin Zhou (2022). Dislocation-Induced Energy Dissipation in a Tunable Trilayer Graphene Resonator. The Journal of Physical Chemistry C.DOI
  88. Zhengyan Yang, Jiaqi Zhang, Kehai Liu, Yuebin Zheng, Kai Zhou, Shuyi Ma, Zhanjun Wu (2022). Guided Wave Excitation and Sensing in Constant Irregular Cross Section Structures with the Semianalytical Finite-Element Method. Journal of Aerospace Engineering.DOI
  89. Zhengyan Yang, Jiaqi Zhang, Kehai Liu, Yuebin Zheng, Shuyi Ma, Zhanjun Wu (2022). Multi-Mode Ultrasonic Guided Waves Based Damage Detection in L-Bars with Asymmetric Cross-Section with Sum of Multiple Signals Method. Sensors.DOI
  90. Duo Chen, Juanzi Li, Yuhuan Yuan, Chang Gao, Yunguang Cui, Shichao Li, Hongyu Wang, Cong Xiang Peng, Xin Liu, Zhanjun Wu, Jinrui Ye (2022). A new strategy to improve the toughness of epoxy thermosets by introducing the thermoplastic epoxy. Polymer.DOI
  91. Zhanjun Wu, Tengteng Li, Jiachen Zhang, Yifan Wu, Jianle Li, Lei Yang, Hao Guan Xu (2022). Shape Sensing of Thin Shell Structure Based on Inverse Finite Element Method. Structural durability & health monitoring.DOI
  92. Zhengyan Yang, Lei Yang, Jiaqi Zhang, Shuyi Ma, Tong Tian, Deshuang Deng, Zhanjun Wu (2022). Damage shape recognition algorithm of composite woven fabric plate based on guided waves. Composite Structures.DOI
  93. 郑跃滨,雷振坤,徐浩,周凯,张佳奇,马书义,武湛君(2021). 基于数据驱动的无基准导波损伤诊断成像方法研究. 《实验力学》.
  94. 武湛君,陈铎,李世超,崔运广,李娟子,袁玉环,王宏宇,刘新(2021). 低温复合材料贮箱关键技术研究应用进展. 《航空制造技术》.DOI
  95. 单一男,马智锦,曾旭,徐新生,武湛君(2021). 基于分布式光纤传感技术的结构变形估计方法研究. 《仪器仪表学报》.DOI
  96. 李克诚,杨雷,高东岳,柳敏静,徐新生,武湛君(2021). 用于低温贮箱的铝合金-硬质聚氨酯泡沫夹芯共底设计与分析. 《复合材料学报》.DOI
  97. 徐浩,沙刚刚,李腾腾,李建乐,武湛君(2021). 基于二维连续小波变换与数据融合技术的逆有限元法-伪激励法结构损伤识别方法. 《复合材料学报》.
  98. 王亿桦,周震寰,李建乐,单一男,赵士元,武湛君(2021). 分布式光纤传感器测量数据可靠性分析方法. 《实验力学》.
  99. Shiyuan Zhao, Liujia Suo, Hao Guan Xu, Zhanjun Wu (2021). Nonlinear correction in the frequency scanning interferometry system by a fiber resonator. Optics Communications.DOI
  100. Jiaqi Zhang, Hao Guan Xu, Kai Zhou, Zhengyan Yang, Kehai Liu, Yuebin Zheng, Shuyi Ma, Zhanjun Wu (2021). Baseline-Free Damage Diagnostic Imaging Approach Relying on the Extraction of Converted Modes of Ultrasonic Guided Waves. Journal of Aerospace Engineering.DOI
  101. Dongyue Gao, Zhanjun Wu, Jian Wen Guo, Yingshan Xu, Dongzhuo Pang, Hongbo Lu (2021). Thermal Protection System Damage Diagnosis Method Using Machine Learning Algorithm. Journal of Spacecraft and Rockets.DOI
  102. Rahim Gorgin, Ziping Wang, Zhanjun Wu, Yang Yu (2021). Probability based impact localization in plate structures using an error index. Mechanical Systems and Signal Processing.DOI
  103. Shiyuan Zhao, Jiwen Cui, Zhanjun Wu, Ziyun Wang, Jiubin Tan (2021). Distributed Fiber Deformation Measurement by High-Accuracy Phase Detection in OFDR Scheme. Journal of Lightwave Technology.DOI
  104. Duo Chen, Juanzi Li, Yuhuan Yuan, Chang Jian Gao, Yunguang Cui, Shichao Li, Xin Liu, Hongyu Wang, Cong Xiang Peng, Zhanjun Wu (2021). A Review of the Polymer for Cryogenic Application: Methods, Mechanisms and Perspectives. Polymers.DOI
  105. Tengteng Li, Maosen Cao, Jianle Li, Lei Yang, Hao Guan Xu, Zhanjun Wu (2021). Structural Damage Identification Based on Integrated Utilization of Inverse Finite Element Method and Pseudo-Excitation Approach. Sensors.DOI
  106. Zhengyan Yang, Zhanjun Wu (2021). Guided Waves Dispersion Analysis in Composite Pipe Using the SAFE Method. Lecture notes in civil engineering.DOI
  107. Kecheng Li, Jianlong Qu, Jinqiang Tan, Zhanjun Wu, Xinsheng Xü (2021). A Symplectic Method of Numerical Simulation on Local Buckling for Cylindrical Long Shells under Axial Pulse Loads. Structural durability & health monitoring.DOI
  108. 李克诚,徐新生,马云龙,吴会强,武湛君(2020). 球筛型火箭贮箱消能器结构设计及优化. 《强度与环境》.DOI
  109. 武湛君(2020). 2018-2019复合材料学科发展报告 = 2018-2019 report on advances in composite materials. 《中国科学技术出版社》.
  110. 刘新,陈铎,何辉永,孙涛,武湛君(2020). 热塑性颗粒-无机粒子协同增韧碳纤维增强环氧树脂复合材料. 《复合材料学报》.DOI
  111. 张佳奇,陈铎,郑跃滨,周凯,杨正岩,武湛君(2020). 基于压电传感器的树脂基复合材料固化过程监测. 《复合材料学报》.DOI
  112. 郑跃滨,周凯,雷振坤,武湛君(2020). 基于同心压电传感器的单模态Lamb波信号提取方法. 《实验力学》.
  113. 郑跃滨,武湛君,雷振坤,高东岳,周凯,张佳奇,杨正岩,邹建超(2020). 基于超声导波的航空航天结构损伤诊断成像技术研究进展. 《航空制造技术》.DOI
  114. 柳敏静,夏梓旭,李建乐,武湛君,高东岳(2020). 基于分布式光纤传感的防热结构损伤识别研究. 《压电与声光》.
  115. 周凯,徐新生,武湛君(2020). 基于压电传感器的单一模态Lamb波损伤检测. 《压电与声光》.
  116. 胡泊昭,袁玉环,马继文,武湛君,陈铎,孙涛(2020). 改性纳米SiO2/环氧树脂热膨胀系数及冲击强度表征. 《航空制造技术》.DOI
  117. 单一男,武湛君,徐新生,费继友(2020). 基于分布式光纤传感的隔热层脱粘识别研究. 《压电与声光》.
  118. Hao Guan Xu, Qi Hui Zhou, Lei Yang, Minjing Liu, Dongyue Gao, Zhanjun Wu, Maosen Cao (2020). Reconstruction of full-field complex deformed shapes of thin-walled special-section beam structures based on in situ strain measurement. Advances in Structural Engineering.DOI
  119. Lei Yang, Fei Wang, Josiah Adamson, Kehai Liu, Zhanjun Wu, Li Tan, Qin Zhou (2020). Passive wireless sensors fabricated by spark plasma sintering for ultra-high temperature measurements. Smart Materials and Structures.DOI
  120. Dongyue Gao, Yi Jiao, Zhanjun Wu, Yuebin Zheng, Jiaqi Zhang (2020). Impedance- and Lamb-Waves-Based Health Condition Monitoring Approach for Composite Cryotanks. Journal of Spacecraft and Rockets.DOI
  121. Zhengyan Yang, Kehai Liu, Kai Zhou, Yu Liang, Jiaqi Zhang, Yuebin Zheng, Dongyue Gao, Shuyi Ma, Zhanjun Wu (2020). Investigation of thermo-acoustoelastic guided waves by semi-analytical finite element method. Ultrasonics.DOI
  122. Jiaqi Zhang, Zhanjun Wu, Zhengyan Yang, Kehai Liu, Kai Zhou, Yuebin Zheng (2020). Excitation of guided wave modes in arbitrary cross-section structures by applied surface tractions. Smart Materials and Structures.DOI
  123. Jiaqi Zhang, Zhanjun Wu, Zhengyan Yang, Chang Gao, Kehai Liu, Yuebin Zheng, Kai Zhou (2020). Multimode Guided Waves–Based Structural Defect Localization Longitudinally and Cross-Sectionally in T-Bars. Journal of Aerospace Engineering.DOI
  124. Liujia Suo, Zhenkun Lei, Zhanjun Wu (2020). A new quality evaluation parameter for Rayleigh backscattering spectrum and its adaptive subset window algorithm in distributed fiber strain measurement. Optical Fiber Technology.DOI
  125. Rahim Gorgin, Ying Luo, Zhanjun Wu (2020). Environmental and operational conditions effects on Lamb wave based structural health monitoring systems: A review. Ultrasonics.DOI
  126. 锁刘佳,雷振坤,渠晓溪,吕睿,武湛君(2019). 一种基于动态参考瑞利散射谱的分布式光纤大应变解调方法. 《实验力学》.
  127. 张佳奇,刘明辉,刘科海,冯咬齐,杨正岩,郑跃滨,武湛君(2019). 基于超声导波的返回舱热防护结构烧蚀层厚度监测方法. 《航天器环境工程》.
  128. Yunlong Ma, Zhengyan Yang, Jiaqi Zhang, Kehai Liu, Zhanjun Wu, Shuyi Ma (2019). Axial stress monitoring strategy in arbitrary cross-section based on acoustoelastic guided waves using PZT sensors. AIP Advances.DOI
  129. Lei Yang, Hao Guan Xu, Kehai Liu, Dongyue Gao, Yifan Huang, Qin Zhou, Zhanjun Wu (2019). Molecular dynamics simulation on the formation and development of interlayer dislocations in bilayer graphene. Nanotechnology.DOI
  130. Kai Zhou, Zhenhuan Zhou, Zhengyan Yang, Xinsheng Xü, Zhanjun Wu (2019). Axisymmetric and non-axisymmetric Lamb wave excitation using rectangular actuators. Smart Materials and Structures.DOI
  131. Yinan Shan, Hao Guan Xu, Zhenhuan Zhou, Ziyi Yuan, Xinsheng Xü, Zhanjun Wu (2019). State sensing of composite structures with complex curved surface based on distributed optical fiber sensor. Journal of Intelligent Material Systems and Structures.DOI
  132. Shiyuan Zhao, Jiwen Cui, Liujia Suo, Zhanjun Wu, Da-Peng Zhou, Jiubin Tan (2019). Performance Investigation of OFDR Sensing System With a Wide Strain Measurement Range. Journal of Lightwave Technology.DOI
  133. Guangming Yang, Ling Liu, Zhanjun Wu (2019). Improved strain sensing capability of nano-carbon free-standing buckypapers based strain gauges. Smart Materials and Structures.DOI
  134. Dongyue Gao, Zhanjun Wu, Lei Yang, Yuebin Zheng, Wan Jie Yin (2019). Structural health monitoring for long-term aircraft storage tanks under cryogenic temperature. Aerospace Science and Technology.DOI
  135. Kai Zhou, Yuebin Zheng, Jiaqi Zhang, Xinsheng Xü, Shuyi Ma, Zhanjun Wu (2019). A reconstruction-based mode separation method of Lamb wave for damage detection in plate structures. Smart Materials and Structures.DOI
  136. Liujia Suo, Zhenkun Lei, Akihiro Takezawa, Zhanjun Wu (2019). Reliability-guided Rayleigh backscattering spectrum correlation method for distributed strain measurements in optical fibres. Journal of Modern Optics.DOI
  137. 申薛靖,刘科海,高东岳,孙涛,杨雷,武湛君(2018). 微胶囊型自愈合聚合物基复合材料研究进展. 《复合材料学报》.
  138. 白生宝,肖迎春,武湛君,刘国强,黄博(2018). 基于Lamb波和典型相关分析的复合材料结构损伤监测. 《压电与声光》.
  139. 武湛君,高东岳(2018). 基于超声导波的航空航天结构健康监测技术——原理、方法与工程化应用. 《2018年全国固体力学学术会议摘要集(下)》.
  140. Tao Sun, Xuejing Shen, Chong Peng, Hongyu Fan, Minjing Liu, Zhanjun Wu (2018). A novel strategy for the synthesis of self-healing capsule and its application. Composites Science and Technology.DOI
  141. Liujia Suo, Zhenkun Lei, Shiyuan Zhao, Zhanjun Wu, Akihiro Takezawa (2018). Study on sliding-window length based on Rayleigh backscattering spectrum correlation in distributed optical-fiber strain measurement. Optical Fiber Technology.DOI
  142. Shichao Li, Jinglin Zheng, Jia Yan, Zhanjun Wu, Qin Zhou, Li Tan (2018). Gate-Free Hydrogel–Graphene Transistors as Underwater Microphones. ACS Applied Materials & Interfaces.DOI
  143. Hongyu Wang, Cong Xiang Peng, Chao Li, Xin Liu, Zhanjun Wu (2018). Improvement of the liquid oxygen compatibility of epoxy via the addition of surface‐modified boehmite. Journal of Applied Polymer Science.DOI
  144. Hao Guan Xu, Qi Hui Zhou, Maosen Cao, Zhongqing Su, Zhanjun Wu (2018). A Dynamic Equilibrium–Based Damage Identification Method Free of Structural Baseline Parameters: Experimental Validation in a Two-Dimensional Plane Structure. Journal of Aerospace Engineering.DOI
  145. Yuebin Zheng, Kehai Liu, Zhanjun Wu, Dongyue Gao, Rahim Gorgin, Shuyi Ma, Zhenkun Lei (2018). Lamb waves and electro-mechanical impedance based damage detection using a mobile PZT transducer set. Ultrasonics.DOI
  146. Zhengyan Yang, Zhanjun Wu, Jiaqi Zhang, Kehai Liu, Youqiang Jiang, Kai Zhou (2018). Acoustoelastic guided wave propagation in axial stressed arbitrary cross-section. Smart Materials and Structures.DOI
  147. 刘新,武湛君,何辉永,许乔奇(2017). 单向碳纤维增强树脂基复合材料的超低温力学性能. 《复合材料学报》.
  148. 王宏宇,孙涛,彭聪,武湛君(2017). 偶联剂种类对二氧化硅增韧环氧树脂低温性能影响. 《第三届中国国际复合材料科技大会摘要集-分会场1-5》.
  149. 柳敏静,赵全月,于松,武湛君(2017). 制孔分层对复合材料连接结构承载性能影响的研究. 《第三届中国国际复合材料科技大会摘要集-分会场31-35》.
  150. 张雨欣,单一男,周凯,武湛君(2017). 基于经验模态分解的撞击定位方法. 《第三届中国国际复合材料科技大会摘要集-分会场46-50》.
  151. 彭聪,武湛君,周大雨(2017). 二氧化硅/环氧/苯并噁嗪三元共聚体系的制备:热学和力学性能. 《第三届中国国际复合材料科技大会摘要集-分会场1-5》.
  152. 杨正岩,张佳奇,高东岳,刘科海,武湛君(2017). 航空航天智能材料与智能结构研究进展. 《航空制造技术》.
  153. 刘新,武湛君,何辉永,许乔奇(2017). 超低温介质对碳纤维增强树脂基复合材料力学性能的影响. 《复合材料学报》.
  154. 单一男,袁紫衣,周震寰,徐新生,武湛君(2017). 基于分布式光纤传感器的复合材料异形曲面结构健康监测. 《第三届中国国际复合材料科技大会摘要集-分会场46-50》.
  155. 刘新,张建云,朱与墨,何辉永,武湛君(2017). 湿热老化对复合材料超低温力学性能的影响. 《第三届中国国际复合材料科技大会摘要集-分会场41-45》.
  156. Zhiwei Li, Lei Yang, Cong Peng, Hongyu Wang, Jialiang Li, Zhanjun Wu (2017). Experimental study on mechanical properties of bisphenol F epoxy resin at different cryogenic temperatures. 《第二十一届国际复合材料大会摘要集—专题一》.
  157. Huiyong He, Xin Liu, Zhanjun Wu (2017). ENHANCEMENT OF INTERLAMINAR FRACTURE TOUGHNESS AND DAMAGE MECHANISMS ANALYSIS IN CFRPS REINFORCED WITH SPRAYED NANO PARTICLES. 《第二十一届国际复合材料大会论文集 专题一》.
  158. 尹晚,渠晓溪,武湛君,高东岳,雷振坤(2017). 火箭贮箱结构健康监测传感器系统设计. 《压电与声光》.
  159. Kai Zhou, Xinsheng Xü, Zhen Yu Zhao, Zhengyan Yang, Zhenhuan Zhou, Zhanjun Wu (2017). Excitation of plane Lamb wave in plate-like structures under applied surface loading. Smart Materials and Structures.DOI
  160. Dongyue Gao, Zhanjun Wu, Lei Yang, Yuebin Zheng (2017). Integrated impedance and Lamb wave–based structural health monitoring strategy for long-term cycle-loaded composite structure. Structural Health Monitoring.DOI
  161. Xin Liu, Tao Sun, Zhanjun Wu, Huiyong He (2017). Mode II interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites with synthetic boehmite nanosheets at room temperature and low temperature. Journal of Composite Materials.DOI
  162. Hao Guan Xu, Zhihui Zeng, Zhanjun Wu, Limin Zhou, Zhongqing Su, Yaozhong Liao, Menglong Liu (2017). Broadband dynamic responses of flexible carbon black/poly (vinylidene fluoride) nanocomposites: A sensitivity study. Composites Science and Technology.DOI
  163. Guodong Shi, Junhan Wang, Hengli Wang, Zhanjun Wu, Huaping Wu (2017). Hydrothermal synthesis of morphology-controlled KNbO 3 , NaNbO 3 , and (K,Na)NbO 3 powders. Ceramics International.DOI
  164. Lei Yang, Zhiwei Li, Tao Sun, Zhanjun Wu (2017). Effects of Gear-Shape Fibre on the Transverse Mechanical Properties of Unidirectional Composites: Virtual Material Design by Computational Micromechanics. Applied Composite Materials.DOI
  165. 刘新,许乔奇,武湛君,刘世祥,何辉永(2016). 超低温对T700碳纤维/环氧复合材料弯曲性能的影响. 《宇航学报》.
  166. 柳敏静,武湛君(2016). 复合材料蜂窝夹层结构在飞机中的应用. 《科技导报》.
  167. 李志伟,李家亮,彭聪,杨雷,武湛君(2016). 六溴环十二烷和三氧化二锑对双酚A型环氧树脂液氧相容性能的影响. 《第十九届全国复合材料学术会议》.
  168. 杨雷,刘新,高东岳,王阳,武湛君(2016). 考虑纤维随机分布的复合材料热残余应力分析及其对横向力学性能的影响. 《复合材料学报》.
  169. 武湛君,渠晓溪,高东岳,刘科海,冯建民(2016). 航空航天复合材料结构健康监测技术研究进展. 《航空制造技术》.
  170. 陈颖璞,赵明,马书义,武湛君,吴会强,马云龙(2016). 管道损伤处纵向导波模态转换对损伤识别的影响. 《工程力学》.
  171. 李家亮,武湛君(2016). 含磷硅环氧杂化材料液氧相容性与低温力学性能研究. 《2016年航空科学与技术全国博士生学术论坛》.
  172. 张晓颖,魏英魁,武湛君,吴会强,王晓博(2016). 低温贮箱回流消能器结构设计及优化. 《导弹与航天运载技术(中英文)》.
  173. 王培德,郑跃滨,杨雷,雷振坤,武湛君(2016). 高应变载荷下压电传感器性能研究. 《压电与声光》.
  174. Zhanjun Wu, Zhengyan Yang, Jiaqi Zhang, Xiaoxi Qu (2016). Fabrication and Characterization of the Piezoelectric Ceramic–Polymer Composites. International Journal of Applied Ceramic Technology.DOI
  175. Lin Xu, Ye Wang, Yuheng Cai, Zhanjun Wu, W. Peng (2016). Determination of impact events on a plate-like composite structure. The Aeronautical Journal.DOI
  176. Dongyue Gao, Zhanjun Wu, Lei Yang, Yuebin Zheng (2016). Guide waves-based multi-damage identification using a local probability-based diagnostic imaging method. Smart Materials and Structures.DOI
  177. Kehai Liu, Shuyi Ma, Zhanjun Wu, Yuebin Zheng, Xiaoxi Qu, Yishou Wang, Wenhua Wu (2016). A novel probability-based diagnostic imaging with weight compensation for damage localization using guided waves. Structural Health Monitoring.DOI
  178. Jialiang Li, Zhiwei Li, Hongyu Wang, Zhanjun Wu, Zhi Wang, Shichao Li (2016). Liquid oxygen compatibility and cryogenic mechanical properties of a novel phosphorous/silicon containing epoxy-based hybrid. RSC Advances.DOI
  179. Cong Xiang Peng, Jialiang Li, Zhanjun Wu, Weibin Peng, Dayu Zhou (2016). Investigating into the liquid oxygen compatibility of a modified epoxy resin containing silicon/phosphorus and its mechanical behavior at cryogenic temperature. RSC Advances.DOI
  180. 杨雷,武湛君(2015). 热残余应力对纤维增强树脂基复合材料横向力学性能的影响. 《中国力学大会-2015论文摘要集》.
  181. 单一男,武湛君,徐新生,常志龙,马云龙(2015). 分布式光纤传感器的应变测量方法及其应用. 《压电与声光》.
  182. Zhanjun Wu, Dongyue Gao, Yishou Wang, Rahim Gorgin (2015). In-service structural health monitoring of a full-scale composite horizontal tail. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  183. Kehai Liu, Zhanjun Wu, Youqiang Jiang, Yishou Wang, Kai Zhou, Yingpu Chen (2015). Guided waves based diagnostic imaging of circumferential cracks in small-diameter pipe. Ultrasonics.DOI
  184. Hongyu Fan, Zhanjun Wu, Tao Sun, Ming Chi Yang, Jiayu Guo, Kehuang Yang, Yue Li (2015). Efficient plasma-assisted approach in nanostructure fabrication of tungsten. Materials & Design.DOI
  185. Zhanjun Wu, Longtao Xu, Yishou Wang, Yongchao Cai (2015). Impact energy identification on a composite plate using basis vectors. Smart Materials and Structures.DOI
  186. Zhanjun Wu, Chao Li, Minjing Liu, Hongyu Wang, Zhi Wang, Xin Liu (2015). Study on liquid oxygen compatibility of bromine‐containing epoxy resins for the application in liquid oxygen tank. Polymers for Advanced Technologies.DOI
  187. Tao Sun, Hongyu Fan, Zhi Wang, Xin Liu, Zhanjun Wu (2015). Modified nano Fe2O3-epoxy composite with enhanced mechanical properties. Materials & Design.DOI
  188. 李世超,柳敏静,武湛君,李家亮(2014). 阻燃剂对双酚F型环氧树脂液氧相容性影响. 《材料科学与工艺》.
  189. 范忠,马书义,武湛君(2014). 复合材料结构实时撞击监测系统. 《压电与声光》.
  190. 刘新,武湛君,蔡永超,王海瑞(2014). 超低温处理对T700碳纤维/环氧复合材料拉—压疲劳性能的影响. 《宇航学报》.
  191. 马书义,王奕首,刘科海,武湛君(2014). 同向与反向切变载荷条件下管道中扭转模态导波激励分析. 《声学学报》.
  192. 范忠,马书义,武湛君(2014). 水下管道超声导波检测实验研究. 《压电与声光》.
  193. 马书义,武湛君,王奕首,刘科海(2014). 基于导波技术的小口径管网实时检测系统. 《压电与声光》.
  194. 马书义,武湛君,王奕首,刘科海(2014). 小口径管扭转模态导波在线检测. 《压电与声光》.
  195. Zhanjun Wu, Jialiang Li, Zhi Wang (2014). Liquid oxygen compatibility and thermal stability of bisphenol A and bisphenol F epoxy resins modified by DOPO. Polymers for Advanced Technologies.DOI
  196. D. Gao, Y. Wang, Zhanjun Wu, G. Rahim (2014). Structural health monitoring technology for a full-scale aircraft structure under changing temperature. The Aeronautical Journal.DOI
  197. Shuyi Ma, Zhanjun Wu, Yishou Wang, Kehai Liu (2014). The reflection of guided waves from simple dents in pipes. Ultrasonics.DOI
  198. Zhanjun Wu, Kehai Liu, Yishou Wang, Yuebin Zheng (2014). Validation and evaluation of damage identification using probability-based diagnostic imaging on a stiffened composite panel. Journal of Intelligent Material Systems and Structures.DOI
  199. Zhanjun Wu, Shichao Li, Minjing Liu, Zhi Wang, Jialiang Li (2014). Synthesis and characterization of a liquid oxygen-compatible epoxy resin. High Performance Polymers.DOI
  200. Zhanjun Wu, Jialiang Li, Yingpu Chen, Zhi Wang, Chao Li (2014). Synthesis and liquid oxygen compatibility of a phosphorous‐containing epoxy resin. Polymer Engineering and Science.DOI
  201. Zhanjun Wu, Jialiang Li, Yingpu Chen, Zhi Wang, Chao Li (2014). Effect of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide on liquid oxygen compatibility of bisphenol a epoxy resin. Journal of Applied Polymer Science.DOI
  202. Dongyue Gao, Yishou Wang, Zhanjun Wu, Rahim Gorgin, Shengbao Bai (2014). Design of a sensor network for structural health monitoring of a full-scale composite horizontal tail. Smart Materials and Structures.DOI
  203. Rahim Gorgin, Zhanjun Wu, Dongyue Gao, Yishou Wang (2014). Nondestructive inspection of composite plates using A0mode of Lamb waves (withdrawal notice). Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  204. Xin Liu, Zhanjun Wu, Rongguo Wang, Jia Yan (2014). Experimental Study of the Electrical Resistivity of Glass-Carbon/Epoxy Hybrid Composites. Polymers and Polymer Composites.DOI
  205. Rahim Gorgin, Zhanjun Wu, Dongyue Gao, Yishou Wang (2014). Damage size characterization algorithm for active structural health monitoring using the A0mode of Lamb waves. Smart Materials and Structures.DOI
  206. Rahim Gorgin, Zhanjun Wu, Yuebin Zheng (2014). A Novel Complementary Method for the Point-Scan Nondestructive Tests Based on Lamb Waves. International Journal of Aerospace Engineering.DOI
  207. 李家亮,武湛君,王智,李世超(2013). 双酚A型环氧树脂的机械冲击液氧相容性研究. 《第十五届中国科协年会第17分会场:复合材料与节能减排研讨会》.
  208. 许龙涛,王奕首,武湛君,马书义(2013). 加筋复合材料圆筒结构的撞击识别. 《复合材料学报》.
  209. 刘新,武湛君,王荣国,刘文博,严佳(2013). 三角形截面碳纤维在复合材料中的分布规律. 《科技导报》.
  210. 单一男,武湛君,王奕首(2013). 基于应变模态的复合材料板结构模型的损伤识别方法. 《第十五届中国科协年会第17分会场:复合材料与节能减排研讨会论文集》.
  211. 许龙涛,武湛君,王奕首,马书义(2013). 加筋复合材料结构撞击识别的关键技术. 《科技导报》.
  212. 王智,庞岩,武湛君(2013). 基于科研资源向教学资源转化的飞行器结构力学的本科教育研究与实践. 《考试周刊》.
  213. Tao Sun, Hongyu Fan, Zhanjun Wu (2013). The study on the compatibility of epoxy resin with liquid oxygen. High Performance Polymers.DOI
  214. M.-J. Liu, S.-C. Li, Zhanjun Wu, Zhuang Wang, Jing-Lun Li (2013). Modification of Liquid Oxygen Compatibility of Bisphenol F Epoxy Resin. International Polymer Processing.DOI
  215. Jialiang Li, Chao Li, Min Wang, Zhanjun Wu, Zhi Wang, Minjing Liu, Xin Liu (2013). Effect of hexabromocyclododecane and antimony trioxide on flame retardancy of bisphenol A epoxy resin. Iranian Polymer Journal.DOI
  216. Xin Liu, Rongguo Wang, Zhanjun Wu, Wenbo Liu (2013). Dielectric property of unidirectional triangle-shape carbon fiber reinforced polymeric composites. Journal of Composite Materials.DOI
  217. 许龙涛,武湛君,王奕首,马书义(2012). 基于系统辨识方法的复合材料结构冲击载荷识别实验研究. 《第十三届全国实验力学学术会议》.
  218. 施志凯,武湛君(2012). 温度荷载对复合材料连接头强度的影响分析. 《第十四届中国科协年会第11分会场:低成本、高性能复合材料发展论坛论文集》.
  219. 武湛君,高飞,赵明(2012). 树脂基材料防晃板的防晃特性研究. 《第十四届中国科协年会第11分会场:低成本、高性能复合材料发展论坛论文集》.
  220. 郑跃滨,高东岳,王奕首,武湛君,卿新林(2012). 面向大面积结构的移动式压电传感系统的实验研究. 《第十三届全国实验力学学术会议论文摘要集》.
  221. 王奕首,高丽敏,高东岳,卿新林,武湛君(2012). 基于超声导波的结构健康监测技术在民机复合材料结构静力试验中的应用研究. 《第十三届全国实验力学学术会议论文摘要集》.
  222. 刘新,武湛君,王荣国,刘文博,严佳(2012). 三角形截面碳纤维在复合材料中分布规律的研究. 《第十四届中国科协年会第11分会场:低成本、高性能复合材料发展论坛论文集》.
  223. 林晓平,刘增华,雷振坤,武湛君(2012). 水下带粘弹性层输油管道中纵向导波的传播特性. 《工程力学》.
  224. Yishou Wang, Shuyi Ma, Zhanjun Wu, Kehai Liu, Xinlin Qing (2012). An experimental study on disbond detection in a thermal insulation system using guided waves under a load-temperature environment. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  225. Zhanjun Wu, Fei Gao, Jia Yan, Zhi Wang (2012). Damage mechanism of polyphenylene sulfide resin in liquid oxygen. Iranian Polymer Journal.DOI
  226. Xin Liu, Rongguo Wang, Zhanjun Wu, Wenbo Liu (2012). The effect of triangle-shape carbon fiber on the flexural properties of the carbon fiber reinforced plastics. Materials Letters.DOI
  227. 卿新林,王奕首,高丽敏,武湛君(2011). 多功能复合材料结构状态感知系统. 《实验力学》.
  228. 林晓平,雷振坤,刘增华,武湛君(2010). 水下输油管道中轴对称导波的频散特性. 《第十三届中国力学学会北方七省、市、区(北京、天津、河北、内蒙、山西、山东、河南)力学学术交流会》.
  229. 张晓晶,张博明,陈吉安,武湛君(2010). 基于镀钯薄膜的微悬臂梁型光纤光栅氢传感器的设计和制备. 《中国激光》.
  230. Wensong Zhou, Zhanjun Wu, Laurent Mevel (2010). Vibration-based Damage Detection to the Composite Tank Filled with Fluid. Structural Health Monitoring.DOI
  231. Zhanjun Wu, Wensong Zhou, Hui Li (2009). Modal analysis for filament wound pressure vessels filled with fluid. Composite Structures.DOI
  232. Shiyong Sun, Hao Chen, Xiaozhi Hu, Zhanjun Wu (2009). Stochastic elasto-plastic fracture analysis of aluminum foams. Acta Mechanica Solida Sinica.DOI
  233. 章继峰,王振清,武湛君,张博明,杜善义(2008). 平板型复合材料格栅结构载荷重构研究 Ⅱ:反演模型与验证. 《复合材料学报》.
  234. 赵海涛,张博明,武湛君,王殿富,戴福洪(2008). 一种用于大尺寸结构健康监测的光纤传感器. 《光电子·激光》.
  235. Xinlin Qing, Zhanjun Wu, Shawn J. Beard, Fu‐Kuo Chang (2008). Advanced active health monitoring system of liquid rocket engines. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  236. 赵海涛,张博明,武湛君,王殿富,戴福洪(2007). 光纤光栅智能复合材料基础问题研究. 《传感器与微系统》.
  237. 赵海涛,张博明,武湛君,王殿富,戴福洪(2007). 纤维缠绕复合材料压力容器健康监测研究进展. 《压力容器》.
  238. 章继峰,张博明,武湛君,杜善义(2007). 平板型复合材料格栅结构载荷重构研究Ⅰ:前向响应模型. 《复合材料学报》.
  239. 潘利剑,武湛君,张博明,章继峰,杜善义(2007). 应用瑞利—里滋法分析储箱内液体晃动模态. 《哈尔滨工程大学学报》.
  240. 赵海涛,张博明,武湛君,王殿富,戴福洪(2006). 利用光纤光栅测量复合材料的弹性模量和曲率. 《复合材料——基础、创新、高效:第十四届全国复合材料学术会议论文集(下)》.
  241. 赵海涛,张博明,武湛君,王殿富,戴福洪(2006). 光纤光栅监测缠绕复合材料与铝板界面的固化应变. 《复合材料学报》.
  242. 刘玲,张博明,王殿富,武湛君(2006). 聚合物基复合材料中孔隙率及层间剪切性能的实验表征. 《航空材料学报》.
  243. 于东,张博明,梁军,武湛君,戴福洪(2006). 形状记忆合金混杂复合材料的力学性能模拟与实验分析. 《第十四届全国复合材料学术会议》.
  244. 张晓晶,武湛君,张博明,吴春涛,杜善义(2005). 光纤布拉格光栅温度灵敏性的实验研究. 《光学技术》.
  245. 张晓晶,武湛君,张博明,吴春涛,杜善义(2005). 光纤布拉格光栅温度和应变交叉灵敏度的实验研究. 《光电子·激光》.
  246. 于佳,张博明,王殿富,武湛君,张宝艳,陈祥宝(2004). 典型双马来酰亚胺树脂固化动力学模型的研究. 《复合材料学报》.
  247. 莫淑华,赵海涛,张博明,武湛君(2004). 电阻法预报CFRP层板疲劳损伤演变过程. 《材料科学与工艺》.
  248. 武湛君,张博明,万里冰(2004). 单根光纤光栅监测复合材料固化工艺过程多目标参量技术的研究. 《复合材料学报》.
  249. 戴福洪,张博明,杜善义,武湛君(2004). RTM工艺注模过程模拟的有限元/控制体积方法和流动分析网络技术比较. 《复合材料学报》.
  250. 王殿富,于佳,刘玲,张博明,武湛君(2004). 先进复合材料高性能、快速、低成本成型技术的工艺力学基础研究. 《首届全国航空航天领域中的力学问题学术研讨会论文集(下册)》.
  251. 戴福洪,张博明,杜善义,武湛君(2004). 复杂形状三维薄壁构件RTM制造工艺注模过程模拟. 《复合材料学报》.
  252. 戴福洪,张博明,杜善义,武湛君(2004). 厚截面构件RTM注射工艺树脂流动过程模拟. 《复合材料学报》.
  253. 戴福洪,武湛君,张博明,杜善义(2004). 复合材料RTM成型工艺固化过程三维数值模拟. 《复合材料学报》.
  254. 杜善义,张晓晶,陈吉安,武湛君,张博明(2004). 光纤氢传感技术的研究现状及其应用前景. 《宇航学报》.
  255. 郭战胜,杜善义,张博明,武湛君(2004). 厚截面树脂基复合材料的温度场研究Ⅰ:模拟. 《复合材料学报》.
  256. 武湛君,万里冰,张博明,赵海涛(2004). 光纤光栅应变传感器监测复合材料层板疲劳过程. 《复合材料学报》.
  257. 王殿富,刘玲,张博明,武湛君,张宝艳,邢丽英(2004). 先进复合材料制造工艺成本估算模型研究现状. 《航空材料学报》.
  258. 万里冰,武湛君,张博明,王殿富(2004). 光纤布拉格光栅监测复合材料固化. 《复合材料学报》.
  259. 郭战胜,杜善义,张博明,武湛君,李方,傅求理(2004). 先进复合材料用环氧树脂的固化反应和化学流变. 《复合材料学报》.
  260. 武湛君,郭战胜,吴春涛,孙晶洁,张博明(2004). HD03环氧树脂粘-温关系研究. 《哈尔滨理工大学学报》.
  261. 于佳,张博明,王殿富,武湛君(2003). 复合材料加工工艺模糊推理方法. 《宇航材料工艺》.
  262. 于佳,张博明,王殿富,武湛君(2003). RTM专用双马来酰亚胺树脂的固化动力学模型研究. 《宇航材料工艺》.
  263. 武湛君,张博明,王殿富,李青坤,于佳音,刘坤(2002). 基于折射率变化的复合材料固化在线监测研究. 《复合材料学报》.
  264. 武湛君,张博明,王殿富,杜善义(2002). 用于FRP固化在线监测的光纤微弯压力传感器. 《复合材料学报》.
  265. 王殿富,万里冰,张博明,武湛君(2002). 光纤传感器在复合材料固化监测中的应用. 《哈尔滨工业大学学报》.
  266. 武湛君,王殿富,李辰砂(2002). 先进复合材料生产光纤智能监控系统. 《电机与控制学报》.
  267. 万里冰,张博明,王殿富,武湛君,赵雪峰,周智(2002). 一种封装的光纤Bragg光栅应变传感器. 《激光技术》.
  268. 李辰砂,张博明,武湛君,王殿富(2001). 采用光纤传感器的专家系统实时监控复合材料固化成型过程的研究. 《高技术通讯》.
  269. 李辰砂,张博明,武湛君,王殿富,杜善义(2001). 光纤传感器监测复合材料成型过程的技术. 《第四届中国功能材料及其应用学术会议》.
  270. 武湛君,张博明,李辰砂,王殿富(2000). 基于光纤在线监测的复合材料固化工艺优化. 《复合材料的现状与发展——第十一届全国复合材料学术会议论文集》.

预印本

  1. Hongjuan Yang, Jitong Ma, Zhengyan Yang, Tong Tian, Deshuang Deng, Dongyue GAO, Lei Yang, Zhanjun Wu (2025). Ultrasonic Wave Propagation and Elastic Constant Characterization of Unidirectional Cfrp Laminates Using Physics-Informed Neural Networks. SSRN Electronic Journal.DOI
  2. Rui Ming Yin, Yuhang Liu, Yi Luo, Jialei Yan, Jialiang Li, Duo Chen, Tao Sun, Chao Li, Zhanjun Wu (2025). Enhancing the Liquid Oxygen Compatibility of Epoxy Resin by Introducing a Novel Phosphorus / Sulfur-Containing Flame Retardant. SSRN Electronic Journal.DOI

此主页由公开资料整理,尚未经学者本人认领。