于福晓｜东北大学｜学者主页

2025

Interfacial diffusion between SiC and Mg alloys

Ruizhen Guo, Qichi Le, Shutang Gao, Yingbin Lin, Tong Wang, Qiyu Liao, Fuxiao Yu

Materials Today Communications

DOI

2024

Effect of P modification on the banded structure and mechanical properties in direct-chill casting Al-16.5Si-3Cu-0.6Mg-0.1Zr alloys

Chunyu Li, Fang Liu, Jiaqi Yin, Fuxiao Yu, Dongpu Zheng, Hairong Qiao, Yuanjie He, Qichi Le

Journal of Alloys and Compounds

DOI

2024

Effect of SiCp on the solidification process of magnesium

Ruizhen Guo, Qichi Le, Yingbin Lin, Tong Wang, Qiyu Liao, Fuxiao Yu

Materials Today Communications

DOI

2024

Effect of ZrO2p on the Microstructure and Mechanical Properties of the AZ31 Magnesium Alloy

Ruizhen Guo, Qichi Le, Yifan Wang, Liang Ren, Yanchao Jiang, Dandan Li, Qiyu Liao, Fuxiao Yu

JOM

DOI

2023

Correlation between formability, ridging and recrystallization texture development in ferritic stainless steel fabricated by introducing intermediate annealing during cold rolling

Fei Gao, Qiyong Zhu, Weiwei Xue, Yingjian Chen, Fengyuan Zhang, Yuqi Nan, Shuai Tang, Jingjing Zhang, Di Tie, Xiaohui Cai, Fuxiao Yu, Zhenyu Liu

Materials Characterization

DOI

2023

Effect of SiCp on the microstructure and tensile properties of the Mg–3Y magnesium alloy

Ruizhen Guo, Qichi Le, Weiyang Zhou, Tong Wang, Liang Ren, Yanchao Jiang, Qi Zou, Qiyu Liao, Fuxiao Yu, Clodualdo Aranas

Journal of Materials Research and Technology

DOI

2023

Formation of recrystallization texture and its effect on deep drawability for high-purified ferritic stainless steel by two step cold rolling

Fei Gao, Yingjian Chen, Qiyong Zhu, Yuqi Nan, Shuai Tang, Zhihui Cai, Feng‐Yuan Zhang, Weiwei Xue, Xiaohui Cai, Fuxiao Yu, Zhenyu Liu

Materials & Design

DOI

2023

The growth mechanism and morphology evolution of primary Si during slow cooling solidification of high purity Al–15Si alloy with Cr additions

Chunyu Li, Fang Liu, Fuxiao Yu, Hairong Qiao, Dongpu Zheng, Qichi Le

Journal of Materials Research and Technology

DOI

2022

Aging Behavior and Precipitates Analysis of Wrought Al-Si-Mg Alloy

Fang Liu, Fuxiao Yu, Dazhi Zhao

Materials

DOI

2022

Effect of casting temperature on halo in the solidification microstructure of direct-chill casting Al-16.5Si-4.5Cu-0.6Mg-0.1Zr alloys

Chunyu Li, Fang Liu, Fuxiao Yu, Hairong Qiao, Dongpu Zheng

Materials Letters

DOI

2022

Deformation behavior of retained austenite and its effect on plasticity based on in-situ EBSD analysis for transformable ferritic stainless steel

Fei Gao, Zilong Gao, Qiyong Zhu, Fuxiao Yu, Zhenyu Liu

Journal of Materials Research and Technology

DOI

2022

The hot rolling deformation performance of as-cast AZ80 magnesium alloy after ultrasonic processing

Xingrui Chen, Xiaoqiang Li, Fangkun Ning, Qiyu Liao, Qichi Le, Xiong Zhou, Fuxiao Yu

Journal of Materials Research and Technology

DOI

2022

Effect of Extrusion and Heat Treatment on Microstructural Evolution and Mechanical Properties of Al-16.5si-4.5cu-0.6mg Alloy with Addition of 0.1wt.% Zr

Chun-Yu Li, F. Liu, Fuxiao Yu, Dongpu Zheng, Hairong Qiao, Q. Le

Social Science Research Network

DOI

2021

Understanding dual-frequency ultrasonic melt treatment on grain refinement and mechanical properties improvement of AZ80 magnesium alloy: experiment and simulation

Xingrui Chen, Yonghui Jia, Qichi Le, Shaochen Ning, Zhaoyang Yin, Chenglu Hu, Fuxiao Yu

Journal of Materials Research and Technology

DOI

2021

Dry Sliding Wear Behavior of Wrought Al-12.7Si-0.7Mg Alloy

Fang Liu, Fuxiao Yu, Dazhi Zhao

Science of Advanced Materials

DOI

2021

Correction to: The Microstructure Refinement and Strength Enhancement of Mg–Al–Si Alloy Subjected by Alternating-Frequency Ultrasonic Melt Treatment

Xingrui Chen, Zhaoyang Yin, Qichi Le, Shaochen Ning, Fuxiao Yu

International Journal of Metalcasting

DOI

2021

Understanding the influence of ultrasonic streaming on solidification of AZ80 magnesium alloy during direct-chill casting using a transient coupling modeling

Xingrui Chen, Yonghui Jia, Qichi Le, Fuxiao Yu

Journal of Materials Research and Technology

DOI

2021

Fatigue Behavior of an Al-12.7Si-0.7Mg Alloy Processed by Extrusion and Heat Treatment

Fang Liu, Fuxiao Yu, Dazhi Zhao, Li Gao

Frontiers in Materials

DOI

2021

The Microstructure Refinement and Strength Enhancement of Mg–Al–Si Alloy Subjected by Alternating-Frequency Ultrasonic Melt Treatment

Xingrui Chen, Zhaoyang Yin, Qichi Le, Shaochen Ning, Fuxiao Yu

International Journal of Metalcasting

DOI

2020

Flow behaviour and constitutive modeling for hot deformation of austenitic stainless steel

Fei Gao, Wanchun Liu, Qiyong Zhu, Zilong Gao, Raja Devesh Kumar Misra, Zhenyu Liu, Fuxiao Yu

Materials Research Express

DOI

2020

The interaction between in situ grain refiner and ultrasonic treatment and its influence on the mechanical properties of Mg–Sm–Al magnesium alloy

Xingrui Chen, Yonghui Jia, Qichi Le, Shaochen Ning, Xiaoqiang Li, Fuxiao Yu

Journal of Materials Research and Technology

DOI

2020

The role of long‐period stacking ordered phase on the discharge and electrochemical behaviors of magnesium anode Mg‐Zn‐Y for the primary Mg‐air battery

Xingrui Chen, Henan Wang, Qichi Le, Yonghui Jia, Xiong Zhou, Fuxiao Yu, Andrej Atrens

International Journal of Energy Research

DOI

2020

Influence of solution temperature on microstructure and mechanical properties of wrought Al-Si-Mg alloy

Fengguo Liu, Fei Gao, Fuxiao Yu, D Z Zhao

IOP Conference Series Materials Science and Engineering

DOI

2020

Influence of Solution Treatment on Microstructure and Electrical Conductivity of Wrought Al-15Si Alloy

Fang Liu, Yongchao Jian, Fuxiao Yu, Dazhi Zhao

IOP Conference Series Materials Science and Engineering

DOI

2020

The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery

Xingrui Chen, Qi Zou, Qichi Le, Jian Hou, Ruizhen Guo, Henan Wang, Chenglu Hu, Lei Bao, Tong Wang, Dazhi Zhao, Fuxiao Yu, Andrej Atrens

Journal of Power Sources

DOI

2020

Investigation on Al6Fe Fibers of Al-3 Wt Pct Fe Alloy at Different Mold Temperatures

Ke Hu, Fuxiao Yu, Qichi Le

Metallurgical and Materials Transactions B

DOI

2019

Three-point bending behavior and microstructural evolution of ZM20E, ZM20EX and AZ31 tubes

Ke Hu, Qichi Le, Weiyang Zhou, Chunyu Li, Qiyu Liao, Fuxiao Yu

Materials Characterization

DOI

2019

Comparison study of hot deformation behavior and processing map of AZ80 magnesium alloy casted with and without ultrasonic vibration

Xingrui Chen, Qiyu Liao, Yanxia Niu, Yonghui Jia, Qichi Le, Shaochen Ning, Chenglu Hu, Ke Hu, Fuxiao Yu

Journal of Alloys and Compounds

DOI

2019

High ductility induced by un-DRXed grains in a Mg–Zn–Mn–La–Ce alloy

Ke Hu, Qiyu Liao, Chunyu Li, Qichi Le, Weiyang Zhou, Chunlong Cheng, Shaochen Ning, Xingrui Chen, Fuxiao Yu

Journal of Materials Science

DOI

2019

Microstructure, mechanical properties and corrosion behavior of quasicrystal-reinforced Mg-Zn-Y alloy subjected to dual-frequency ultrasonic field

Xingrui Chen, Shaochen Ning, An Wang, Qichi Le, Qiyu Liao, Yonghui Jia, Chunlong Cheng, Xiaoqaing Li, Andrej Atrens, Fuxiao Yu

Corrosion Science

DOI

2019

A constitutive relation of AZ80 magnesium alloy during hot deformation based on Arrhenius and Johnson–Cook model

Xingrui Chen, Qiyu Liao, Yanxia Niu, Weitao Jia, Qichi Le, Chunlong Cheng, Fuxiao Yu, Jianzhong Cui

Journal of Materials Research and Technology

DOI

2018

The simultaneous application of variable frequency ultrasonic and low frequency electromagnetic fields in semi continuous casting of AZ80 magnesium alloy

Xingrui Chen, Yonghui Jia, Qiyu Liao, Weitao Jia, Qichi Le, Shaochen Ning, Fuxiao Yu

Journal of Alloys and Compounds

DOI

2018

Microstructure evolution of Al-15% Si alloy during hot rolling

Chunxia Wang, Fuxiao Yu, Dazhi Zhao, Xiang Min Zhao, Liang Zuo

Philosophical Magazine Letters

DOI

2017

Heat-treatment induced defect formation in α-Al matrix in Sr-modified eutectic Al–Si alloy

Xiaorui Liu, Benoît Beausir, Yudong Zhang, Weimin Gan, Hui Yuan, Fuxiao Yu, Claude Esling, Xiang Min Zhao, Liang Zuo

Journal of Alloys and Compounds

DOI

2016

时效时间对变形铝硅合金组织与性能的影响

刘芳，于福晓，赵大志，左良

《东北大学学报(自然科学版)》

2016

Cu对Al-12.7Si合金凝固过程的影响

赵大志，刘芳，于福晓，左良

《铸造》

2016

The Effect of Cu on the Solidification Process of Al-12.7Si Alloy

D. Zhao, Fang Liu, Fuxiao Yu, L. Zuo

2016

Microstructure and Properties of Al-12.7Si-0.7Mg Alloy Extrusion after End-Quenching Test

N. Tian, T. Hong, Gang Zhao, Fuxiao Yu, L. Zuo

DOI

2016

AL-12.7SI合金の凝固過程に及ぼすCUの影響【JST・京大機械翻訳】

D. Zhao, Fang Liu, Fuxiao Yu, L. Zuo

2015

过共晶铝硅合金的高温力学性能及显微组织演变

刘芳，于福晓，张祎玲，赵大志，许茜，左良

《中国有色金属学报》

2015

Transmission electron microscopy study of precipitates in an artificially aged Al–12.7Si–0.7Mg alloy

Fang Liu, Fuxiao Yu, Dazhi Zhao, Liang Zuo

Materials Characterization

DOI

2015

Microstructure, Texture, and Deep Drawability Under Two Different Cold-Rolling Processes in Ferritic Stainless Steel

Fei Gao, Fuxiao Yu, R.D.K. Misra, Xiangjun Zhang, Shu-min Zhang, Zhenyu Liu

Journal of Materials Engineering and Performance

DOI

2015

Hot Deformation Behavior and Flow Stress Prediction of Ultra Purified 17% Cr Ferritic Stainless Steel Stabilized with Nb and Ti

Fei Gao, Fuxiao Yu, Haitao Liu, Zhenyu Liu

Journal of Iron and Steel Research International

DOI

2015

Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al–12.7%Si alloys investigated by SEM/EBSD

Xiaorui Liu, Yudong Zhang, Benoît Beausir, Fang Liu, Claude Esling, Fuxiao Yu, Xiang Min Zhao, Liang Zuo

Acta Materialia

DOI

2015

Influence of Solution Treatment on the Microstructure and Mechanical Properties of an Deformed Al-12.7Si-0.7Mg Alloy

Fang Liu, Fuxiao Yu, K. Hu, D. Zhao, L. Zuo

DOI

2014

Correlation between ductile-to-brittle transition behaviour and twinning in ferritic stainless steel

Fei Gao, Fuxiao Yu, R.D.K. Misra, H.-T. Liu, Z. Y. Liu

Materials Science and Technology

DOI

2014

Constitutive modeling and dynamic softening mechanism during hot deformation of an ultra-pure 17%Cr ferritic stainless steel stabilized with Nb

Fei Gao, Zhenyu Liu, R.D.K. Misra, Haitao Liu, Fuxiao Yu

Metals and Materials International

DOI

2014

Microstructure and mechanical properties of Al-3Fe alloy processed by equal channel angular extrusion

Yu Fuxiao, Liu Fang, Zhao Dazhi, László S. Tóth

IOP Conference Series Materials Science and Engineering

DOI

2013

Hot deformation and processing maps of DC cast Al-15%Si alloy

Chunxia Wang, Fuxiao Yu, Dazhi Zhao, Xiang Min Zhao, Liang Zuo

Materials Science and Engineering A

DOI

2013

Superplasticity, flow and fracture mechanism in an Al–12.7Si–0.7Mg alloy

Furong Cao, Zhuoliang Li, Nianxian Zhang, Hua Ding, Fuxiao Yu, Liang Zuo

Materials Science and Engineering A

DOI

2013

Effect of Si Content on Deformation Behavior of DC Cast Al-Si Alloys

Chun-Xia Wang, Fuxiao Yu, D. Zhao, Xiang Zhao, L. Zuo

DOI

2012

固溶温度对新型Al-12.7Si-0.7Mg合金挤压材组织性能的影响

洪涛，龚园平，田妮，赵刚，于福晓，左良

《稀有金属》

2012

半连续铸造Al-15Si合金热压缩变形流变应力行为

王春霞，于福晓，赵骧，左良

《东北大学学报(自然科学版)》

2012

Characterization of precipitates in a hot-deformed hypereutectic Al–Si alloy

Kezhun He, Fuxiao Yu, Dazhi Zhao, Liang Zuo

Journal of Alloys and Compounds

DOI

2012

Surface modification of Mg67–Zn30–Y3 quasicrystal alloy by high current pulsed electron beam

Bo Gao, Hao Yi, Ganfeng Tu, Shiwei Li, Fuxiao Yu, Liang Zuo, Liang Yi Hu

Surface and Coatings Technology

DOI

2012

Effect of Strain Rate on the Microstructural Development in DC Cast Al‐15Si Alloy

Wang Chunxia, Fuxiao Yu, Zhao Dazhi, Xiang Min Zhao, Zuo Liang

DOI

2012

The Effect of Artificial Aging Treatment on Microstructure and Tensile Properties of Al‐12.7Si‐0.7Mg Alloy

Fang Liu, Fuxiao Yu, Zhao Dazhi, Zuo Liang

DOI

2012

Microstructures and Properties of Hypoeutectic Al-Si Alloy Extruded in Semi-Solid State

D. Zhao, Fuxiao Yu, Fang Liu, Ke-Zhun He, L. Zuo

DOI

2012

Deformability of Eutectic Al-Si Alloys Produced by Semi-Continuously DC Casting during Hot-Rolling

T. Hong, Gang Zhao, N. Tian, Fuxiao Yu, L. Zuo

DOI

2012

Hot Deformation Behavior and Microstructure Evolution of a DC Cast Hypereutectic Al-Si Alloy

Ke-Zhun He, Fuxiao Yu, D. Zhao, L. Zuo

DOI

2011

AlSi7Mg合金低过热度半连续铸造组织的重熔演变

赵大志，于福晓，何克准，刘芳，左良

《特种铸造及有色合金》

2011

Al-12.7Si合金表面强烈塑性变形诱发的纳米化

Gang Liu, Wen-Cong Yan, Fuxiao Yu, Gang Zhao, Xiang Zhao, L. Zuo

DOI

2011

低过热度半连续铸造AlMg0.9Si0.6合金重熔工艺的研究

赵大志，于福晓，刘芳，何克准，左良

《铸造》

2011

Microstructure and mechanical properties of an Al–12.7Si–0.7Mg alloy processed by extrusion and heat treatment

Fang Liu, Fuxiao Yu, Dazhi Zhao, Liang Zuo

Materials Science and Engineering A

DOI

2011

Constitutive Equation of an Al-12.7Si-0.7Mg Alloy in Superplastic Deformation

Yin Ben Han, Zhuo-Liang Li, Ge Zhou, F. Cao, H. Ding, Fuxiao Yu

DOI

2011

Effect of Casting Velocity on Microstructures of Almg0.9Si0.7 Alloy by Low-Superheat DC Casting

D. Zhao, Fuxiao Yu, Fang Liu, Ke-Zhun He

DOI

2011

Study on Reheating Process of AIMg0.9Si0.6 Alloy by Semi-Continuous Casting of Low Superheat

D. Zhao, Fuxiao Yu, Fang Liu, Ke-Zhun He, L. Zuo

2011

Development of Processing Maps for DC Cast Modified and Unmodified Hypereutectic Al-Si Alloys

Ke-Zhun He, Fuxiao Yu, D. Zhao, L. Zuo

DOI

2010

磷变质对Al-17.5Si-4.5Cu-1Zn-0.7Mg-0.5Ni变形合金初晶硅形貌与室温拉伸性能的影响

何克准，于福晓，赵大志，左良

《中国有色金属学报》

2010

Effect of neodymium on primary silicon and mechanical properties of hypereutectic Al-15%Si alloy

Weixi Shi, Bo Gao, Ganfeng Tu, Shiwei Li, Hao Yi, Fuxiao Yu

Journal of Rare Earths

DOI

2010

Microstructural Evolution of Eutectic Al-Si Alloys Produced by Semi-Continuously DC Casting during Heating and Hot-Rolling

T. Hong, Gang Zhao, N. Tian, Fuxiao Yu, L. Zuo

DOI

2009

Solidification microstructure and temperature field during direct chill casting of Al-16Si alloy

Fuxiao Yu, Jianhua Pei, Kezhun He, Dazhi Zhao, Liang Zuo

Transactions of the Indian Institute of Metals

DOI

2009

Effect of phosphorus modification on the microstructure and mechanical properties of DC cast Al-17.5Si-4.5Cu-1Zn-0.7Mg-0.5Ni alloy

Kezhun He, Fuxiao Yu, Dazhi Zhao, Liang Zuo

Transactions of the Indian Institute of Metals

DOI

2007

快速凝固铝硅合金粉末加热过程中硅颗粒的粗化行为

王话，于福晓，孙振国

《铸造》

2007

Effect of DH treatment on microstructure and mechanical properties of an LM28–0.3wt.% Nd hypereutectic aluminum silicon alloy

Bo Gao, Chengshuai Lei, Fuxiao Yu, S SUN, TU Gan-feng

Rare Metals

DOI

2005

Effects of low frequency electromagnetic field on the as-cast microstructures and mechanical properties of superhigh strength aluminum alloy

Yubo Zuo, Jianzhong Cui, Jie Dong, Fuxiao Yu

Materials Science and Engineering A

DOI

2005

Effect of low frequency electromagnetic field on the constituents of a new super high strength aluminum alloy

Yubo Zuo, Jianzhong Cui, Jie Dong, Fuxiao Yu

Journal of Alloys and Compounds

DOI

2005

A new way to cast high-alloyed Al–Zn–Mg–Cu–Zr for super-high strength and toughness

Jingbo Dong, Jianzhong Cui, Fuxiao Yu, Zhipeng Zhao, Y.B. Zhuo

Journal of Materials Processing Technology

DOI

2004

Effect of low-frequency electromagnetic casting on the castability, microstructure, and tensile properties of direct-chill cast Al-Zn-Mg-Cu alloy

Jie Dong, Zhihao Zhao, Jianzhong Cui, Fuxiao Yu, Chunyan Ban

Metallurgical and Materials Transactions A

DOI

2004

Effect of an alternating magnetic field on the phase formation in Al-Cu couple

Xiaotao Liu, Jianzhong Cui, Fuxiao Yu

Journal of Materials Science

DOI

2003

Microstructure and mechanical properties of spray-formed Al–Si–Pb alloys

Fuxiao Yu, D.S Dwarakadasa, S. Ranganathan

Journal of Materials Processing Technology

DOI

2001

Fundamental differences between spray forming and other semisolid processes

Fuxiao Yu, Jianzhong Cui, S. Ranganathan, E. S. Dwarakadasa

Materials Science and Engineering A

DOI

精选作品

期刊论文

Interfacial diffusion between SiC and Mg alloys

Effect of P modification on the banded structure and mechanical properties in direct-chill casting Al-16.5Si-3Cu-0.6Mg-0.1Zr alloys

Effect of SiCp on the solidification process of magnesium

Effect of ZrO2p on the Microstructure and Mechanical Properties of the AZ31 Magnesium Alloy

Correlation between formability, ridging and recrystallization texture development in ferritic stainless steel fabricated by introducing intermediate annealing during cold rolling

Effect of SiCp on the microstructure and tensile properties of the Mg–3Y magnesium alloy

Formation of recrystallization texture and its effect on deep drawability for high-purified ferritic stainless steel by two step cold rolling

The growth mechanism and morphology evolution of primary Si during slow cooling solidification of high purity Al–15Si alloy with Cr additions

Aging Behavior and Precipitates Analysis of Wrought Al-Si-Mg Alloy

Effect of casting temperature on halo in the solidification microstructure of direct-chill casting Al-16.5Si-4.5Cu-0.6Mg-0.1Zr alloys

Deformation behavior of retained austenite and its effect on plasticity based on in-situ EBSD analysis for transformable ferritic stainless steel

The hot rolling deformation performance of as-cast AZ80 magnesium alloy after ultrasonic processing

Effect of Extrusion and Heat Treatment on Microstructural Evolution and Mechanical Properties of Al-16.5si-4.5cu-0.6mg Alloy with Addition of 0.1wt.% Zr

Understanding dual-frequency ultrasonic melt treatment on grain refinement and mechanical properties improvement of AZ80 magnesium alloy: experiment and simulation

Dry Sliding Wear Behavior of Wrought Al-12.7Si-0.7Mg Alloy

Correction to: The Microstructure Refinement and Strength Enhancement of Mg–Al–Si Alloy Subjected by Alternating-Frequency Ultrasonic Melt Treatment

Understanding the influence of ultrasonic streaming on solidification of AZ80 magnesium alloy during direct-chill casting using a transient coupling modeling

Fatigue Behavior of an Al-12.7Si-0.7Mg Alloy Processed by Extrusion and Heat Treatment

The Microstructure Refinement and Strength Enhancement of Mg–Al–Si Alloy Subjected by Alternating-Frequency Ultrasonic Melt Treatment

Flow behaviour and constitutive modeling for hot deformation of austenitic stainless steel

The interaction between in situ grain refiner and ultrasonic treatment and its influence on the mechanical properties of Mg–Sm–Al magnesium alloy

The role of long‐period stacking ordered phase on the discharge and electrochemical behaviors of magnesium anode Mg‐Zn‐Y for the primary Mg‐air battery

Influence of solution temperature on microstructure and mechanical properties of wrought Al-Si-Mg alloy

Influence of Solution Treatment on Microstructure and Electrical Conductivity of Wrought Al-15Si Alloy

The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery

Investigation on Al6Fe Fibers of Al-3 Wt Pct Fe Alloy at Different Mold Temperatures

Three-point bending behavior and microstructural evolution of ZM20E, ZM20EX and AZ31 tubes

Comparison study of hot deformation behavior and processing map of AZ80 magnesium alloy casted with and without ultrasonic vibration

High ductility induced by un-DRXed grains in a Mg–Zn–Mn–La–Ce alloy

Microstructure, mechanical properties and corrosion behavior of quasicrystal-reinforced Mg-Zn-Y alloy subjected to dual-frequency ultrasonic field

A constitutive relation of AZ80 magnesium alloy during hot deformation based on Arrhenius and Johnson–Cook model

The simultaneous application of variable frequency ultrasonic and low frequency electromagnetic fields in semi continuous casting of AZ80 magnesium alloy

Microstructure evolution of Al-15% Si alloy during hot rolling

Heat-treatment induced defect formation in α-Al matrix in Sr-modified eutectic Al–Si alloy

时效时间对变形铝硅合金组织与性能的影响

Cu对Al-12.7Si合金凝固过程的影响

The Effect of Cu on the Solidification Process of Al-12.7Si Alloy

Microstructure and Properties of Al-12.7Si-0.7Mg Alloy Extrusion after End-Quenching Test

AL-12.7SI合金の凝固過程に及ぼすCUの影響【JST・京大機械翻訳】

过共晶铝硅合金的高温力学性能及显微组织演变

Transmission electron microscopy study of precipitates in an artificially aged Al–12.7Si–0.7Mg alloy

Microstructure, Texture, and Deep Drawability Under Two Different Cold-Rolling Processes in Ferritic Stainless Steel

Hot Deformation Behavior and Flow Stress Prediction of Ultra Purified 17% Cr Ferritic Stainless Steel Stabilized with Nb and Ti

Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al–12.7%Si alloys investigated by SEM/EBSD

Influence of Solution Treatment on the Microstructure and Mechanical Properties of an Deformed Al-12.7Si-0.7Mg Alloy

Correlation between ductile-to-brittle transition behaviour and twinning in ferritic stainless steel

Constitutive modeling and dynamic softening mechanism during hot deformation of an ultra-pure 17%Cr ferritic stainless steel stabilized with Nb

Microstructure and mechanical properties of Al-3Fe alloy processed by equal channel angular extrusion

Hot deformation and processing maps of DC cast Al-15%Si alloy

Superplasticity, flow and fracture mechanism in an Al–12.7Si–0.7Mg alloy

Effect of Si Content on Deformation Behavior of DC Cast Al-Si Alloys

固溶温度对新型Al-12.7Si-0.7Mg合金挤压材组织性能的影响

半连续铸造Al-15Si合金热压缩变形流变应力行为

Characterization of precipitates in a hot-deformed hypereutectic Al–Si alloy

Surface modification of Mg67–Zn30–Y3 quasicrystal alloy by high current pulsed electron beam

Effect of Strain Rate on the Microstructural Development in DC Cast Al‐15Si Alloy

The Effect of Artificial Aging Treatment on Microstructure and Tensile Properties of Al‐12.7Si‐0.7Mg Alloy

Microstructures and Properties of Hypoeutectic Al-Si Alloy Extruded in Semi-Solid State

Deformability of Eutectic Al-Si Alloys Produced by Semi-Continuously DC Casting during Hot-Rolling

Hot Deformation Behavior and Microstructure Evolution of a DC Cast Hypereutectic Al-Si Alloy

AlSi7Mg合金低过热度半连续铸造组织的重熔演变

Al-12.7Si合金表面强烈塑性变形诱发的纳米化

低过热度半连续铸造AlMg0.9Si0.6合金重熔工艺的研究

Microstructure and mechanical properties of an Al–12.7Si–0.7Mg alloy processed by extrusion and heat treatment

Constitutive Equation of an Al-12.7Si-0.7Mg Alloy in Superplastic Deformation

Effect of Casting Velocity on Microstructures of Almg0.9Si0.7 Alloy by Low-Superheat DC Casting

Study on Reheating Process of AIMg0.9Si0.6 Alloy by Semi-Continuous Casting of Low Superheat

Development of Processing Maps for DC Cast Modified and Unmodified Hypereutectic Al-Si Alloys

磷变质对Al-17.5Si-4.5Cu-1Zn-0.7Mg-0.5Ni变形合金初晶硅形貌与室温拉伸性能的影响

Effect of neodymium on primary silicon and mechanical properties of hypereutectic Al-15%Si alloy

Microstructural Evolution of Eutectic Al-Si Alloys Produced by Semi-Continuously DC Casting during Heating and Hot-Rolling

Solidification microstructure and temperature field during direct chill casting of Al-16Si alloy

Effect of phosphorus modification on the microstructure and mechanical properties of DC cast Al-17.5Si-4.5Cu-1Zn-0.7Mg-0.5Ni alloy

快速凝固铝硅合金粉末加热过程中硅颗粒的粗化行为

Effect of DH treatment on microstructure and mechanical properties of an LM28–0.3wt.% Nd hypereutectic aluminum silicon alloy

Effects of low frequency electromagnetic field on the as-cast microstructures and mechanical properties of superhigh strength aluminum alloy

Effect of low frequency electromagnetic field on the constituents of a new super high strength aluminum alloy

A new way to cast high-alloyed Al–Zn–Mg–Cu–Zr for super-high strength and toughness