郭景杰

期刊论文

1. Hongli Kang, Fei-Fei Huang, Qiang Wu, Xiao Liang, Songsong Xu, Rui-Run Chen, Jingjie Guo (2026). Thermodynamic-kinetic compensation and non-dilute diffusivity correction in V–Ni–Mn hydrogen separation membranes. International journal of hydrogen energy.DOI
2. Zhao-Hui Hu, Shu Wang, Rui-Run Chen, Xiao-Fu Zhang, Shi-Bing Cheng, Hao Tian, Qiu-Ju Zhu, Xiao-Ming Wang, Ya-Long Gao, Jingjie Guo (2026). Shrinkage Porosity and Microstructure Control via Casting-Module-Driven Optimization in Ni-based Superalloy Castings. International Journal of Metals.DOI
3. Jiacheng Pan, Shu Wang, Rui-Run Chen, De-Zhi Chen, Chen Xiong, Hao Tian, Qiu-Ju Zhu, Yanlai Liu, Xiao-Ming Wang, Ya-Long Gao, Jingjie Guo, Xinjiang Zhang (2026). An original dimensionless parameter for regulating and optimizing defects in variable cross-section components: Turbine blades as an example. International Communications in Heat and Mass Transfer.DOI
4. Shi-Yang Hu, Xin Ding, W. Cao, Xiang-Feng Ma, Hongxian Shen, Yong Zhang, Jingjie Guo, Rui-Run Chen (2026). Achieving Ambient‐Temperature Fast Hydrogenation Properties in Ga‐Doped Mg–Ni Alloy: Dual‐Phase Synergistic Catalysis and Stacking Fault Channels. Rare Metals.DOI
5. Chao Xu, De-Zhi Chen, Xiao-Fu Zhang, Qi Wang, Jing-Yue Yu, Shu Wang, Jingjie Guo, Heng-Zhi Fu, Rui-Run Chen, T. Lookman (2026). High temperature Nb-Si alloys using data science: optimization of fracture toughness and high-temperature strength. Nature Communications.DOI
6. Shi-Yang Hu, Xin Ding, W. Cao, Xiang-Feng Ma, Hongxian Shen, Yong Zhang, Jingjie Guo, Rui-Run Chen (2026). In-situ fabrication of nanocatalysts and interactive stacking faults in rapidly solidified Mg-Ni-Ga fiber with excellent hydrogen storage properties. Journal of Materials Science & Technology.DOI
7. Ji-Chang Yu, Hongze Fang, Ruirun Chen, Jia-Qi Hao, Bo-bo Li, Baohui Zhu, Xianfei Ding, Jingjie Guo (2026). Hf-induced solute drag regulates silicide precipitation for enhanced thermomechanical performance in near α-Ti alloys. Journal of Alloys and Compounds.DOI
8. Shu Wang, Shi-Bing Cheng, Rui-Run Chen, Zhao-Hui Hu, Peng Zhang, Hongze Fang, Qiu-Ju Zhu, Haitao Liu, Xiao-Ming Wang, Ya-Long Gao, Jingjie Guo (2026). A Novel Coupled Model for Interface Temperature Prediction in Investment Casting with Considering the Variation of Shell Mold and Insulation Asbestos Thickness. International Journal of Metals.DOI
9. Wuxin Fan, Guo-Qiang Zhu, Bo-Tao Jiang, Bao-Xian Su, Xiao-Dong Liu, Chen Liu, Xu Liu, Hao Guo, Liang Wang, Eshov Bakhtiyor, Liang-Shun Luo, Yan-Qing Su, Jingjie Guo (2026). A dual-phase refractory high-entropy alloy with extremely high specific strength and excellent ultra-high temperature strength. Vacuum.DOI
10. Xuesong Xu, He Liang, Hong-Sheng Ding, K. P. Davidson, R. V. Ramanujan, Rui-Run Chen, Jingjie Guo, Heng-Zhi Fu (2025). Oxidation behavior and mechanical properties of a directionally solidified high Nb TiAl based alloy between 800 °C and 900 °C. Intermetallics (Barking).DOI
11. Shu Wang, Jiacheng Pan, Rui-Run Chen, Chen Xiong, Jianpeng Tan, Hao Tian, Qiu-Ju Zhu, Yanlai Liu, Xiao-Ming Wang, Ya-Long Gao, Jingjie Guo (2025). Orthogonal parameter optimization of K435 turbine blades manufactured by investment casting based on physical field analysis and microstructure prediction. International Journal of Heat and Mass Transfer.DOI
12. Longhui Yao, Liang Wang, Ran Cui, Qi Lv, Chun-Zhi Zhao, Xuan Wang, Shuai Guan, Liang-Shun Luo, Qi Lai, Rui-Run Chen, Yan-Qing Su, Jingjie Guo (2025). Enhancing Strength and Toughness of 7xxx Aluminum Alloys via TiC Nanoparticles in Electron Beam Rapid Additive Manufacturing. Materials Science & Engineering: A.DOI
13. Shu Wang, Chen Xiong, Ruirun Chen, Jiacheng Pan, De-Zhi Chen, Hongze Fang, Qiu-Ju Zhu, Xiao-Ming Wang, Yanbo Liu, Ya-Long Gao, Jingjie Guo (2025). Optimization on Preheating Temperature of Shell Mold and Pouring Temperature for Investment Casting Turbine Blade by Numerical Simulation. International Journal of Metals.DOI
14. Yuan-Zi Gong, Qiang Wang, Hui Du, Wei Xu, Po Zhang, Le Gu, Hong-Sheng Ding, Rui-Run Chen, Jingjie Guo (2025). Microstructure evolution and deformation behavior of continuously cast Ti-44Al-5Nb-2.5Cr-1.5V alloy during thermal compression. Journal of Alloys and Compounds.DOI
15. Shu Wang, Wei-Peng Xu, Xiao-Fu Zhang, Rui-Run Chen, Jianpeng Tan, Qi Wang, Yue Chai, Hao Tian, Jingjie Guo (2025). Comprehensive analysis of phase stability and elastic properties to toughen Nb-Si based alloy doped with Ta: A theoretical calculation and experiment study. Applied Materials Today.DOI
16. Guo-Qiang Zhu, Liang Wang, Bao-Xian Su, Meng-Liang Yao, Enbo Wei, Bo-Tao Jiang, Jia-Xin Du, Weikun Zhang, Yong Zhang, Rui-Run Chen, Yan-Qing Su, Jingjie Guo (2025). Interdependent slip and twinning behaviors for improving cryogenic mechanical properties in Ti-6Al-3Nb-2Zr-1Mo alloy additively manufactured by electron beam wire-fed. International journal of plasticity.DOI
17. Chen Xiong, Shu Wang, Rui-Run Chen, Wei-Peng Xu, Jiacheng Pan, De-Zhi Chen, Hongze Fang, Qiu-Ju Zhu, Xiao-Ming Wang, Yanbo Liu, Ya-Long Gao, Jingjie Guo (2025). Coupled Investigation of Process Parameters and Grain Structure Evolution in Investment Cast Turbine Blades. International Journal of Metals.DOI
18. He Liang, Hong-Sheng Ding, Xuesong Xu, Xuxing Zhang, Rui-Run Chen, Jingjie Guo, Heng-Zhi Fu (2025). A novel cross-lamellar deformation mechanism through α2 ↔ γ bidirectional phase transformation in a γ-TiAl alloy. Scripta Materialia.DOI
19. Jiacheng Pan, Shu Wang, Ruirun Chen, De-Zhi Chen, Chen Xiong, Jianpeng Tan, Hao Tian, Qiu-Ju Zhu, Yanlai Liu, Xiao-Ming Wang, Ya-Long Gao, Jingjie Guo, Xinjiang Zhang (2025). Novel design strategy of insulation cotton for regulating temperature gradient during investment casting based on simulation visualization and experiment results. Materials Today Communications.DOI
20. Qiang Wang, Hui Du, Wei Xu, Le Gu, Hong-Sheng Ding, Rui-Run Chen, Jingjie Guo (2025). Isothermal oxidation behavior and microstructure evolution of heat-treated TiAl alloys. Intermetallics (Barking).DOI
21. Hongze Fang, Ji-Chang Yu, Ruirun Chen, Jia-Qi Hao, Bo-bo Li, Baohui Zhu, Xianfei Ding, Jingjie Guo (2025). In situ observation of eutectic and primary TiB formation and their thermodynamic and kinetic mechanisms during the solidification of titanium alloys. Materials Characterization.DOI
22. Shi-Qiu Liu, Hong-Sheng Ding, Rui-Run Chen, Jingjie Guo, Heng-Zhi Fu (2025). Substantial 〈101] superlattice dislocations and nanotwins achieved without deformation in a casting Cr-rich TiAl-based alloy after a normalizing treatment. Materials letters (General ed.).DOI
23. Shi-Bing Cheng, Shu Wang, Ruirun Chen, Zhaohui Hu, Peng Zhang, Hongze Fang, Qiu-Ju Zhu, Haitao Liu, Xiao-Ming Wang, Ya-Long Gao, Jingjie Guo (2025). The Influence and Optimization of Investment Casting Parameters on Shrinkage Cavity Formation in Segmented Turbine Ring Castings. International Journal of Metals.DOI
24. Shuang-Yong Tian, Shuang-Yong Tian, Zhen Xu, Anwei Qian, Ti-Zhuo Jia, Jingjie Guo, Yu-Chong Sun (2025). Effects of Mn and Zr microalloying on the organization and high-temperature mechanical properties of twin roll casting 6061 aluminum alloy sheet. Metallurgical Research & Technology.DOI
25. Yong Yang, Binbin Wang, Baoxian Su, Zhiwen Li, Binqiang Li, Tong Liu, Liangshun Luo, Liang Wang, Yanqing Su, Jingjie Guo, Hao Fu (2025). Additively manufactured dual-area NiTi alloys with quasi-linear superelasticity and cyclic stability via grain boundary modification. Journal of Material Science and Technology.DOI
26. Binbin Wang, Zhenyu Huang, Yang Zhang, Yanan Wang, Baoxian Su, Fuyu Dong, Yanqing Su, Jingjie Guo (2025). Hydrogen microalloying depresses the crystallization in metallic glass-forming liquids. Transactions of Materials Research.DOI
27. Yanan Wang, Peng Yan, Binbin Wang, Baoxian Su, Liangshun Luo, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2025). Regulating heat input for additive manufacturing of oxide inclusions-free ODS-FeCrAl steel. Journal of Materials Research and Technology.DOI
28. 高雪峰，陈峣，任浩，秦刚，周启文，陈瑞润，郭景杰（2024）. 异质结构CoCrFeNiW高熵合金的拉伸性能和强化行为（英文）. Transactions of Nonferrous Metals Society of China.
29. 张相龙，徐莽，耿小奇，刘国怀，王晔，王昭东，郭景杰（2024）. 抽拉速率对定向凝固柱晶DZ4125高温合金组织及偏析行为的影响. 《热加工工艺》.
30. Ke-Xuan Li, Hongze Fang, Ruirun Chen, Jiangshan Liang, Xianfei Ding, Yongchun Zou, Jingjie Guo (2024). Synergistic effect of twin consumption within lamellae and slip system activation at grain boundary on the formation of nano-spherical B2 phase. Scripta Materialia.DOI
31. Qiang Wang, Xin-Lin Wu, Le Gu, Hong-Sheng Ding, Rui-Run Chen, Jingjie Guo (2024). Microstructure evolution and nano-precipitate of multi-stage heat-treated Ti–45Al–2Nb–2Cr-0.3C alloy. Intermetallics (Barking).DOI
32. Hao Ren, De-Zhi Chen, Xue-feng Gao, Tong Liu, G. Qin, Ruirun Chen, Shi-Ping Wu, Jingjie Guo, H. Fu (2024). Contribution of Sc doping to the growth and adhesion of alumina scale on AlCoCrFeNi high-entropy alloy. Scripta Materialia.DOI
33. Shu-Lin Dong, Shi-Bing Liu, Meilin Ji, Ying-Dong Qu, Rui-Run Chen, Jingjie Guo (2024). Anomalous increase of fracture toughness of TiAl-based alloys at high temperature. Materials Characterization.DOI
34. Xuxing Zhang, Hong-Sheng Ding, He Liang, Hao Guo, Rui-Run Chen, Jingjie Guo, H. Fu (2024). Effect of compositional minor adjustment on localized lamellar structure coarsening of TiAl alloys with different solidification modes. Journal of Alloys and Compounds.DOI
35. Chun-Zhi Zhao, Liang Wang, Bin-Bin Wang, Meiyu Fan, Yong Zhang, Jia-Cheng Zhou, Weikun Zhang, Liang-Shun Luo, Rui-Run Chen, Yan-Qing Su, Jingjie Guo (2024). Effect of post-deposition heat treatments on the microstructure and tensile properties of wire-fed electron beam directed energy deposition GH4169 Ni-based alloy. Materials Characterization.DOI
36. Bao-Xian Su, Bo-Tao Jiang, Guo-Qiang Zhu, Meng-Hao Zhong, S. Bi, Bin-Bin Wang, Liang-Shun Luo, Liang Wang, Fei Yang, Chen Liu, Fuyu Dong, Yan-Qing Su, Jingjie Guo (2024). Insights into the microstructure and corrosion behavior of in-situ synthesized TiC/Ti-6Al-3Nb-2Zr-1Mo composites. Corrosion Science.DOI
37. Shu-Lin Dong, Junchong Gao, Shi-Bing Liu, Ying-Dong Qu, Rui-Run Chen, Guang-Long Li, Jingjie Guo (2024). High-temperature tensile rupture property of (Nb,W) co-alloying TiAl-based alloys. Materials Characterization.DOI
38. Guo-Qiang Zhu, Liang Wang, Bao-Xian Su, Bin-Bin Wang, Ran Cui, Hui Yan, Bo-Tao Jiang, Jia-Cheng Zhou, Rui-Run Chen, Liang-Shun Luo, Yan-Qing Su, Jingjie Guo (2024). Deciphering the microstructural development and excellent ductility in electron beam wire-fed additive manufacturing of Ti-6Al-3Nb-2Zr-1Mo alloys based on high deposition rate. Additive Manufacturing.DOI
39. Shi-Yang Hu, Xin Ding, Rui-Run Chen, Xiang-Feng Ma, Wen-Chao Cao, Hongxian Shen, Yong Zhang, Jingjie Guo (2024). An approach for advancing the hydrogen storage properties via H-induced precipitation of even nanocatalytsts in rapid solidified Mg–Ni–Y alloy fibers. International journal of hydrogen energy.DOI
40. Hongze Fang, Lingyan Zhou, Ke-Xuan Li, Xiaokang Yang, Xianfei Ding, Ruirun Chen, Cheng-Lei Fan, Jingjie Guo (2024). Improved microstructure and mechanical properties by in-situ formed nano borides of high-Nb TiAl composites under ultrasound in the solid-liquid two-phase region. Ceramics International.DOI
41. He Liang, Hong-Sheng Ding, Xuesong Xu, Xuxing Zhang, Ruirun Chen, Jingjie Guo, H. Fu (2024). Effect of variation in Zr content on microstructure and high-temperature tensile properties of a γ-TiAl alloy. Materials Science & Engineering: A.DOI
42. Xuxing Zhang, Hong-Sheng Ding, He Liang, Hao Guo, Rui-Run Chen, Jingjie Guo, Heng-Zhi Fu (2024). Effect of alloying composition on solidification microstructure and mechanical properties of TNM-based TiAl alloys. Materials Science & Engineering: A.DOI
43. Ji-Chang Yu, Hongze Fang, Jia-Qi Hao, Xin-Da Li, Ruirun Chen, Baohui Zhu, Jingjie Guo (2024). Effects of Co on the microstructure evolution and mechanical properties of Ti-4Al-6Cr-5Mo-8Nb alloy by ultrasonic vacuum melting. Journal of Alloys and Compounds.DOI
44. Chun-Zhi Zhao, Liang Wang, Bin-Bin Wang, Yong Zhang, Longhui Yao, Meiyu Fan, Qi-Xin Li, Liang-Shun Luo, Rui-Run Chen, Yan-Qing Su, Jingjie Guo (2024). Tailoring the Crystalline Structures and Mechanical Properties of IN718 Alloy Repaired by Wire-Fed Electron Beam Directed Energy Deposition through a Custom-Designed Heat Treatment Process. Materials Science & Engineering: A.DOI
45. Seungmin Kwak, Jaehwan Kim, Hong-Sheng Ding, He Liang, Rui-Run Chen, Jingjie Guo, H. Fu (2024). Prediction improvement of compressive strength and strain of directionally solidified TiAl alloy based on training data size adjustment. Journal of Materials Research and Technology.DOI
46. Xin Ding, W. Cao, Rui-Run Chen, Jia-Xin Zhang, Hongxian Shen, Jingjie Guo (2024). Effects of Cu on the microstructure and hydrogen storage properties of Mg-20Ni alloy. MATEC Web of Conferences.DOI
47. Li-Dan Qu, Yongzhe Wang, Hong-Sheng Ding, Rui-Run Chen, Jingjie Guo, Wei Li (2024). Equiaxed to Columnar Transition of Ti46Al8Nb0.5B Intermetallics during Directional Solidification. MATERIALS TRANSACTIONS.DOI
48. Hongze Fang, Ke-Xuan Li, Ruirun Chen, Hong-Yuan Zhai, Xianfei Ding, Yongchun Zou, Jingjie Guo (2024). Refining Ti2AlC in the liquid region and improving the microstructure and mechanical properties of Ti-46Al-8Nb-2.6 C alloy by adding Y. Journal of Alloys and Compounds.DOI
49. Xing-Run Chen, Guo-Guang Cheng, Jingjie Guo, Ji-Xiang Pan (2024). Transformation of inclusions in S32101 duplex stainless steel during continuous casting. Metallurgical Research & Technology.DOI
50. Jiachen Zhou, Baoxian Su, Binbin Wang, Liangshun Luo, Tong Liu, Yanan Wang, Liang Wang, Yanqing Su, Guo Jingjie, FU Hengzhi (2024). Achieving strength-ductility synergy of laser powder bed fusion Ti–6.5Al–2Zr–1Mo–1V alloy by regulating laser power. Journal of Materials Research and Technology.DOI
51. Qiang Wang, Xinlin Wu, Zhongkai Bai, Le Gu, Hongsheng Ding, Ruirun Chen, Jingjie Guo (2024). Microstructures and mechanical properties of a γ-TiAl alloy modified by Gd additions. Materials Science and Engineering A.DOI
52. Ran Cui, Liang Wang, Yanqing Su, Binqiang Li, Longhui Yao, Binbin Wang, Liangshun Luo, Ruirun Chen, Jingjie Guo, Xipeng Tan (2024). Multiscale microstructure containing nanometer-scale precipitations and stacking faults yields a high-strength Al-5Cu alloy by electron beam freeform fabrication. Acta Materialia.DOI
53. Chunzhi Zhao, Liang Wang, Binbin Wang, Meiyu Fan, Guoqiang Zhu, Baoxian Su, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2024). High-temperature oxidation behavior of GH4169 superalloy repair by wire-fed electron beam directed energy deposition. Vacuum.DOI
54. Baoxian Su, Haodong Chao, Yinling Jin, Ganggang Cui, Menghao Zhong, Binbin Wang, Liangshun Luo, Liang Wang, Yanqing Su, Haiguang Huang, Fei Yang, Jingjie Guo (2024). Influence of heat treatment on microstructure and thermo-physical properties of Al-50wt%Si alloy fabricated by selective laser melting. Journal of Materials Research and Technology.DOI
55. Xuefeng Gao, Yao Chen, Hao Ren, Gang Qin, Qiwen Zhou, Ruirun Chen, Jingjie Guo (2024). Tensile properties and strengthening behavior of CoCrFeNiW high entropy alloys with heterogeneous structures. Transactions of Nonferrous Metals Society of China.DOI
56. Jiaxin Zhang, Xin Ding, Ruirun Chen, Xiang-Feng Ma, Wenchao Cao, Yong Zhang, Jingjie Guo (2024). Diversification of interfaces triggered hydrogen storage properties enhancement. Rare Metals.DOI
57. Zhaobo Li, Liangshun Luo, Liangshun Luo, Binbin Wang, Baoxian Su, Lei Luo, Lei Luo, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2024). The effects of V or Sn addition on the microstructural characteristics and mechanical properties of Nb-16Si-22Ti-2Al-2Cr alloy. International Journal of Refractory Metals and Hard Materials.DOI
58. 杨宇昕，李新中，梁骁，陈瑞润，郭景杰，傅恒志，刘冬梅（2023）. 在两步CeO2修饰的多孔YSZ-Al2O3管上制备高渗透性和热稳定性Pd膜（英文）. Transactions of Nonferrous Metals Society of China.
59. 陈瑞润，丁鑫，王琪，陈德志，张佳欣，任浩，郭景杰（2023）. 稀土掺杂新材料的开发及性能优化机理. 《中国稀土学会2023学术年会、第十五届中国包头·稀土产业论坛摘要集》.DOI
60. 刘国怀，张相龙，耿小奇，徐莽，王晔，王昭东，郭景杰（2023）. 抽拉速率对定向凝固DZ4125合金温度场及晶粒竞争生长的影响. 《航空材料学报》.
61. Lingyan Zhou, Hongze Fang, Xiaokang Yang, Rui-Run Chen, Xianfei Ding, Ying-Mei Tan, Jingjie Guo (2023). Improvement of microstructure and acquirement of excellent mechanical properties of high-Nb Ti2AlC/TiAl alloy by Ta under ultrasonic action in solid-liquid zone. Journal of Materials Research and Technology.DOI
62. Yinling Jin, Hongze Fang, Rui-Run Chen, Jiwei Wang, Shicheng Sun, Shu Wang, Bing-Shuo Shao, Jingjie Guo (2023). Morphological modification of Mg2Si phase and strengthening mechanism in Mg2Si/Al composites by Eu addition and T6 heat treatment. Journal of Materials Science & Technology.DOI
63. Jia-Xin Zhang, Xin Ding, Rui-Run Chen, W. Cao, Yong Zhang, Jingjie Guo (2023). Achievement in modifying dehydrogenation kinetics for Sc-containing Mg matrix in Mg-Y-Zn alloy. Journal of Materials Research and Technology.DOI
64. Ke-Xuan Li, Hongze Fang, Ruirun Chen, Hong-Yuan Zhai, Xianfei Ding, Yongchun Zou, Jingjie Guo (2023). Improving mechanisms of lamellar microstructure and mechanical properties by Y and in-situ Y2O3: Modification of carbides particles and complete transformation of Ti2AlC particles. Materials Characterization.DOI
65. Shicheng Sun, Hongze Fang, Yili Li, Rui-Run Chen, Jingjie Guo, Baohui Zhu (2023). Formation mechanism of titanium solid solution and its influence on equiaxed behavior of α phase of Ti-5Al-5Mo-5Cr-2Zr-xNb alloys. Journal of Materials Research and Technology.DOI
66. K. Zhu, Quan Zhang, Xin-Zhong Li, Zhao-Xiang Ma, Xiang-Jin Zhao, Z. Liu, Jingjie Guo (2023). A novel method to design Nb(W)-Ti-Co(Fe) alloy membrane with high hydrogen permeability and strong resistance to hydrogen embrittlement. Journal of Materials Research and Technology.DOI
67. Xin Ding, Shuting Zhang, Rui-Run Chen, Xiang-ling Ma, Shi-Yang Hu, Yong Zhang, Jingjie Guo (2023). Enhanced hydrogen storage properties of Ti40-V45Zr15Cr alloys by dual-phase nanostructures of eutectic and spinodal decomposition. Journal of Energy Storage.DOI
68. Yili Li, Hongze Fang, Rui-Run Chen, Shicheng Sun, Xiang Xue, Jingjie Guo (2023). Optimization of (α+β) microstructure and trade-off between strength and toughness: Based on Mo[eq] and d electron theory in β-Ti alloy. Materials & Design.DOI
69. Shulin Dong, Wei Wu, Rui-Run Chen, Ying-Dong Qu, Jingjie Guo, Guang-Long Li, Wei Zhang, H. Fu, Bo Yu (2023). Enhanced fracture toughness stability of (B,Y)-contained TiAl-based alloy prepared by cold crucible directional solidification. Intermetallics (Barking).DOI
70. Jia-Xin Zhang, Xin Ding, Rui-Run Chen, W. Cao, Yong Zhang, Jingjie Guo (2023). Comparative study for microstructure and hydrogen storage capabilities of Mg95Zn2R3 (R Y, La) alloys. International journal of hydrogen energy.DOI
71. Tong Liu, Xue-feng Gao, G. Qin, Yan-Qing Su, Jingjie Guo, Rui-Run Chen (2023). Investigation of multi-phase strengthened Ni36Co30Cr11Fe11Al8Ta4 high entropy alloy prepared by directional solidification. Materials Science & Engineering: A.DOI
72. W. Cao, Xin Ding, Rui-Run Chen, Jia-Xin Zhang, Yong Zhang, Jingjie Guo, H. Fu (2023). In-situ formation of uniform Mg2Ni catalyst and hydrogen storage properties of Mg 41Ni alloys with varied grain sizes and morphologies. Materials Characterization.DOI
73. Yili Li, Hongze Fang, Rui-Run Chen, Xianfei Ding, Shichen Sun, Baohui Zhu, Xiang Xue, Jingjie Guo (2023). A comparative analysis of a unique DRX process in achieving a homogeneous distribution of β grains in the single phase region of as-cast Ti644321 alloy. Materials Characterization.DOI
74. W. Cao, Xin Ding, Rui-Run Chen, Jia-Xin Zhang, Yong Zhang, Jingjie Guo, H. Fu (2023). Dual tuning of the de-/hydrogenation thermodynamics and kinetics of the Mg–Ni alloy by introducing the Ag–H bond: enhanced hydrogen storage properties at moderate temperatures. Journal of Materials Chemistry A.DOI
75. Hao Ren, Ruirun Chen, Xuefeng Gao, Tong Liu, Gang Qin, Yu‐Lung Chiu, Shiping Wu, Jingjie Guo (2023). Introduction of rare‐earth element Sc in alloy design to modify wear features of dual‐phase high‐entropy alloy. Rare Metals.DOI
76. Hao Ren, Ruirun Chen, Xuefeng Gao, Tong Liu, Gang Qin, Yu‐Lung Chiu, Shiping Wu, Jingjie Guo (2023). A Hf‐doped dual‐phase high‐entropy alloy: phase evolution and wear features. Rare Metals.DOI
77. Chunzhi Zhao, Liang Wang, Binbin Wang, Longhui Yao, Botao Jiang, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2023). Microstructure evolution and mechanical properties of wire-fed electron beam directed energy deposition repaired GH4169 superalloy. Journal of Materials Research and Technology.DOI
78. Yuxin Yang, Xinzhong Li, Xiao LIANG, Ruirun Chen, Jingjie Guo, Hengzhi Fu, Dongmei Liu (2023). Preparation of Pd membrane with high permeability and thermal stability on porous YSZ-Al2O3 tubes by two-step CeO2modification. Transactions of Nonferrous Metals Society of China.DOI
79. Zhaobo Li, Liangshun Luo, Liangshun Luo, Binbin Wang, Baoxian Su, Lei Luo, Lei Luo, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2023). Cooperative effects of Mo and B additions on the microstructure and mechanical properties of multi-elemental Nb-Si-Ti based alloys. Materials Characterization.DOI
80. Yanan Wang, Binbin Wang, Liangshun Luo, Binqiang Li, Baoxian Su, Baoxian Su, Dayong Chen, Tong Liu, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2023). Build atmosphere aided texture control in additively manufactured FeCrAl steel by laser powder bed fusion. Scripta Materialia.DOI
81. Tong Liu, Xuefeng Gao, Gang Qin, Yanqing Su, Jingjie Guo, Ruirun Chen (2023). Microstructure evolution and strengthening mechanism of directional solidification Ni40.5Co30Cr11Fe11Al6Ta1.5 high entropy alloy. Materials Characterization.DOI
82. Guoqiang Zhu, Liang Wang, Binbin Wang, Binqiang Li, Junbo Zhao, Bao Fu Ding, Ran Cui, Botao Jiang, Chunzhi Zhao, Baoxian Su, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2023). Multi-materials additive manufacturing of Ti64/Cu/316L by electron beam freeform fabrication. Journal of Materials Research and Technology.DOI
83. Botao Jiang, Liang Wang, Jiaxin Du, Hui Yu Yan, Guoqiang Zhu, Beibei Xu, Baoxian Su, Baoxian Su, Binbin Wang, Chen Liu, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2023). Insights into hydrogen-induced strengthening mechanism of TiC/Ti6Al4V via experiments and first-principles calculations. Composites Part B Engineering.DOI
84. Guoqiang Zhu, Yichen Wang, Liang Wang, Binbin Wang, Ran Cui, Binqiang Li, Baoxian Su, Chen Liu, Ruirun Chen, Liangshun Luo, Yanqing Su, Jingjie Guo (2023). Insights into the gradient microstructure and mechanical properties of Ti-6.5Al–2Zr–Mo–V alloy manufactured by electron beam freeform fabrication. Materials Science and Engineering A.DOI
85. Jiaxin Zhang, Xin Ding, Ruirun Chen, Wenchao Cao, Yong an Zhang, Yanqing Su, Jingjie Guo (2023). Effective attempt towards enhancing hydrogen storage performance of LPSO phase contained high-capacity Mg-based alloy by Indium. International Journal of Hydrogen Energy.DOI
86. Zhe Li, Chen Liu, Liang Wang, Zhiwen Li, Qingda Zhang, Binbin Wang, Baoxian Su, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2023). Phase transformation and dislocation behavior dependence on cooling rate in novel refractory high entropy alloy. Materials Science and Engineering A.DOI
87. Yanan Wang, Binbin Wang, Liangshun Luo, J.P. Oliveira, Binqiang Li, Hui Yan, Tong Liu, Junhao Zhao, Liang Wang, Yanqing Su, Jingjie Guo, Dayong Chen (2023). Effects of process atmosphere on additively manufactured FeCrAl oxide dispersion strengthened steel: Printability, microstructure and tensile properties. Materials Science and Engineering A.DOI
88. Zhaobo Li, Liangshun Luo, Liangshun Luo, Binbin Wang, Baoxian Su, Lei Luo, Lei Luo, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2023). Effect of Ge addition on microstructural evolution and mechanical properties of quinary Nb-16Si-22Ti-2Al-2Cr alloy. International Journal of Refractory Metals and Hard Materials.DOI
89. Yong Yang, Binbin Wang, Baoxian Su, Liangshun Luo, Liang Wang, Yanqing Su, Yanjin Xu, Haiguang Huang, Jingjie Guo, Hengzhi Fu (2023). Investigation on corrosion behavior of Zr-bearing TA10-based titanium alloys. Corrosion Science.DOI
90. Shichen Sun, Hongze Fang, Yili Li, Ruirun Chen, Xiaofu Zhang, Yanqing Su, Jingjie Guo (2023). Regulating phase ratio of β/α and static recrystallization of Ti-5Al-5Mo-5Cr-3Nb-2Zr with high plasticity alloyed by vanadium. Materials Characterization.DOI
91. Botao Jiang, Liang Wang, Hui Yu Yan, Binbin Wang, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2023). Hydrogen-induced microstructure optimization and mechanical properties enhancement of forged (TiB + TiC)/Ti6Al4V. Materials Characterization.DOI
92. Yili Li, Hongze Fang, Ruirun Chen, Shichen Sun, Xue Xiang, Jingjie Guo (2023). Microstructure evolution and strength-toughness synergy mechanism in as-cast Ti-7Mo-4Al-3Nb-2Cr-2Zr-xTa alloy. Materials Characterization.DOI
93. Jingjing Liu, Xinzhong Li, Xinzhong Li, Hengzhi Fu, Jingjie Guo, Dongmei Liu (2023). Reactive magnetron sputtering to enhance the hydrogen permeation performance of NbC/V composite membranes. Materials Chemistry and Physics.DOI
94. Shichen Sun, Hongze Fang, Ruirun Chen, Yili Li, Yanqing Su, Jingjie Guo (2023). Discontinuous yield behavior in titanium alloys caused by activated dislocations during tensile testing at room temperature. Scripta Materialia.DOI
95. Yinling Jin, Hongze Fang, Ruirun Chen, Shichen Sun, Shu Wang, Yanqing Su, Jingjie Guo (2023). Graded distribution and refinement of Mg2Si in Al–Mg2Si alloy prepared by traveling magnetic field. Journal of Materials Research and Technology.DOI
96. Hui Yan, Liang Wang, Xiaoming Wang, Botao Jiang, Hongcan Liu, Binbin Wang, Liangshun Luo, Yanqing Su, Jingjie Guo, Hengzhi Fu (2023). Effects of Melt Hydrogenation on the Microstructure Evolution and Hot Deformation Behavior of TiBw/Ti-6Al-4V Composites. Materials.DOI
97. Yili Li, Hongze Fang, Xiaofu Zhang, Shichen Sun, Ruirun Chen, Xiang Xin Xue, Jingjie Guo (2023). Forming mechanism of growth twins and microstructure evolution on improvement of strength and toughness properties by β-eutectoid element in Ti-7Mo-4Al-4Zr-3Nb-2Cr-xFe alloys. Journal of Alloys and Compounds.DOI
98. Xuesong Xu, Hongsheng Ding, Haitao Huang, He Liang, Raju V. Ramanujan, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2023). Twinning-induced dislocation and coordinated deformation behavior of a high-Nb TiAl alloy during high-cycle fatigue. International Journal of Fatigue.DOI
99. Kunjun Zhu, Xinzhong Li, Huiyuan Geng, Zhongli Liu, Xiangjin Zhao, Jingjie Guo (2023). Mechanism of tungsten strengthening hydrogen transportation in Nb48Ti27Co25 hydrogen permeable alloy membrane. Journal of Materials Research and Technology.DOI
100. Qiang Wang, Xinling Wu, Xinwang Liu, Liangcai Zeng, Hongsheng Ding, Ruirun Chen, Jingjie Guo (2023). Effects of heat treatment on the microstructures and mechanical properties of as-cast Ti-45Al-2Nb-2Cr-(0.2, 0.5) C alloys. Journal of Alloys and Compounds.DOI
101. Liang Wang, Botao Jiang, Xuan Wang, Ruirun Chen, Yingmei Tan, Liangshun Luo, Yanqing Su, Jingjie Guo (2023). Superior hot workability of (TiB+TiC)/Ti-6Al-4V composites fabricated by melt hydrogenation. Journal of Alloys and Compounds.DOI
102. Botao Jiang, Liang Wang, Hui Yu Yan, Jiliang Teng, Binbin Wang, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2023). Microstructural characterization and mechanical properties of (TiB + TiC) reinforced Ti–6Al–4V prepared by melt hydrogenation. Journal of Materials Research and Technology.DOI
103. Zhiwen Li, Liang Wang, Chen Liu, Junbo Zhao, Binbin Wang, Zhe Li, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2023). Hall-Petch Strengthening by Grain Boundaries and Annealing Twin Boundaries in Non-Equiatomic Ni2FeCr Medium-Entropy Alloy. Metals.DOI
104. Yao Chen, Yao Chen, Xuefeng Gao, Gang Qin, Ruirun Chen, Jingjie Guo (2023). Achieving excellent specific yield strength in non-equiatomic TiNbZrVMo high entropy alloy via metalloid Si doping. Materials Letters.DOI
105. Siyu Chen, Yingmei Tan, Xuan Wang, Feng Cao, Liang Wang, Yanqing Su, Jingjie Guo (2023). Individual and synergistic effects of Ta and Mn on optimizing the microstructures and mechanical properties of TiB reinforced high Nb–TiAl composites. Journal of Materials Research and Technology.DOI
106. Yongzhe Wang, Xinwang Liu, Duo Dong, Dongdong Zhu, Hongsheng Ding, Ruirun Chen, Guo Jingjie, Hengzhi Fu (2023). Temperature-dependent mechanical properties and fracture behavior of directionally solidified Ti47Al2Cr2Nb alloy. Journal of Materials Research and Technology.DOI
107. 丁鑫，陈瑞润，郭景杰（2022）. 稀土元素对高容量Mg-TM储氢合金的组织与吸放氢性能调控. 《中国稀土学会2022学术年会、第十四届中国包头·稀土产业论坛摘要集》.DOI
108. 陈瑞润，周灵燕，方虹泽，杨小康，丁宏升，郭景杰（2022）. 硼和超声波对Ti42Al6Nb2.6C0.8Ta合金组织性能耦合作用机制研究. 《精密成形工程》.
109. 杨勇，王斌斌，李妍洁，骆良顺，黄海广，王亮，苏彦庆，郭景杰，傅恒志（2022）. 微量Cu掺杂对TA10合金组织、力学性能与腐蚀行为的影响. 《材料开发与应用》.
110. 王亮，颜卉，姜博涛，陈云，骆良顺，苏彦庆，郭景杰（2022）. Fe代替V制备低成本钛合金的组织与性能. 《特种铸造及有色合金》.
111. Xuefeng Gao, Yao Chen, Ruirun Chen, Tong Liu, Hongze Fang, Gang Qin, Yanqing Su, Guo Jingjie (2022). Tailoring formation and proportion of strengthening phase in non-equiatomic CoCrFeNi high entropy alloy by alloying Si element. Intermetallics.DOI
112. Xiao Liang, Feifei Huang, Songsong Xu, Jingjie Guo, Dongmei Liu, Xinzhong Li (2022). Microstructure and hydrogen transport properties of (V90Cr5Al5)90Cu10 alloy membranes. Journal of Alloys and Compounds.DOI
113. Shuting Zhang, Xin Ding, Xuefeng Gao, Ruirun Chen, Wenchao Cao, Yanqing Su, Jingjie Guo (2022). Dual enhancement in strength and ductility of Ti-V-Zr medium entropy alloy by fracture mode transformation via a heterogeneous structure. International Journal of Plasticity.DOI
114. Haitao Huang, Hongsheng Ding, Xuesong Xu, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). On real-time control of microstructure of TiAl specimens with varied cross-sections based on numerical calculation and machine learning. Journal of Alloys and Compounds.DOI
115. Shichen Sun, Hongze Fang, Yili Li, Xiaofu Zhang, Ruirun Chen, Jingjie Guo (2022). Formation mechanism and effect on the mechanical properties of TiSi phase for Ti-5Al-5Mo-5Cr-3Nb-2Zr alloyed by silicon. Journal of Alloys and Compounds.DOI
116. Shulin Dong, Qi Wang, Ruirun Chen, Yingdong Qu, Jingjie Guo, Guanglong Li, Wei Zhang, Bo Yu (2022). Microstructure evolution and enhanced fracture toughness of Ti-44Al-8Nb-0.1B alloy fabricated by cold crucible directional solidification under different temperature gradients. Materials Characterization.DOI
117. Xuan Wang, Siyu Chen, Yingmei Tan, Longhui Yao, Liang Wang, Yanqing Su, Jingjie Guo (2022). Microstructure Evolution and Enhanced Hot Workability of TiC/Ti-6Al-4V Composites Fabricated by Melt Hydrogenation. Materials.DOI
118. Shulin Dong, Yingdong Qu, Ruirun Chen, Guanglong Li, Wei Zhang, Qi Wang, Hongze Fang, Jingjie Guo, Bo Yu (2022). Proper (Nb,Fe) co-alloyed TiAl-based alloy with good hot deformation processing capability. Intermetallics.DOI
119. Botao Jiang, Liang Wang, Hui Yu Yan, Guoqiang Zhu, Jiliang Teng, Binbin Wang, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2022). Hydrogen-induced modification of the interface between matrix and ceramic phase of (TiB + TiC)/Ti–6Al–4V. Composites Communications.DOI
120. Siyu Chen, Yingmei Tan, Xuan Wang, Feng Cao, Liang Wang, Yanqing Su, Jingjie Guo (2022). Comparing the role of Zr and Hf atoms on microstructure and mechanical properties optimization of Ti2AlN reinforced Ti48Al 0.5W composites. Journal of Alloys and Compounds.DOI
121. Xuefeng Gao, Ruirun Chen, Tong Liu, Gang Qin, Jingjie Guo (2022). Hetero-deformation-induced strengthening behavior of as-annealed Co30Cr30Fe18Ni18Mo4 high entropy alloy by metastable σ phase. Materials Science and Engineering A.DOI
122. Yuxin Yang, Xinzhong Li, Xiao Liang, Ruirun Chen, Jingjie Guo, Hengzhi Fu, Dongmei Liu (2022). Preparation of thin (∼2 μm) Pd membranes on ceramic supports with excellent selectivity and attrition resistance. International Journal of Hydrogen Energy.DOI
123. Baoxian Su, Binbin Wang, Liangshun Luo, Liang Wang, Chen Liu, Yanqing Su, Yanjin Xu, Haiguang Huang, Jingjie Guo, Hengzhi Fu, Yu Zou (2022). Tuning microstructure and improving the corrosion resistance of a Ti-6Al-3Nb-2Zr-1Mo alloy via solution and aging treatments. Corrosion Science.DOI
124. Zhiping Li, Liangshun Luo, Yanqing Su, Binbin Wang, Liang Wang, Tong Liu, Mengjia Yao, Chen Liu, Jingjie Guo, Hengzhi Fu (2022). A high-withdrawing-rate method to control the orientation of (γ+α2) lamellar structure in a β-solidifying γ-TiAl-based alloy. Materials Science and Engineering A.DOI
125. Junhao Zhao, Binbin Wang, Tong Liu, Liangshun Luo, Yanan Wang, Xiaonan S. Zheng, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu, Dayong Chen (2022). A study on overlapping effect of melt pools in powder bed fusion based on a novel prediction method. Additive manufacturing.DOI
126. Shu Wang, Qi Wang, Ruirun Chen, Yinling Jin, Dezhi Chen, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Numerical analysis for solid-liquid interface shape at various temperature gradient in electromagnetic cold crucible directional solidification. International Journal of Heat and Mass Transfer.DOI
127. Hongze Fang, Kexuan Li, Ruirun Chen, Hongyuan Zhai, Xiaokang Yang, Yongda Yan, Yong Zhang, Jingjie Guo (2022). Refining Ti2AlC particles and improvement of microstructure and mechanical properties on Ti46Al8Nb2.6C alloy by Er addition. Materials Science and Engineering A.DOI
128. Jiaxin Zhang, Xin Ding, Ruirun Chen, Wenchao Cao, Yong an Zhang, Yanqing Su, Jingjie Guo (2022). Comparative study of solid-solution treatment and hot-extrusion on hydrogen storage performance for Mg96Y2Zn2 alloy: The nonnegligible role of elements distribution. Journal of Power Sources.DOI
129. Shuting Zhang, Xin Ding, Ruirun Chen, Jiaxin Zhang, Yanqing Su, Shiping Wu, Jingjie Guo (2022). Modification of nano-eutectic structure and the relation on hydrogen storage properties: A novel Ti–V–Zr medium entropy alloy. International Journal of Hydrogen Energy.DOI
130. Yuxin Yang, Xinzhong Li, Xiao Liang, Ruirun Chen, Jingjie Guo, Hengzhi Fu, Dongmei Liu (2022). A two-step electroless plating method for Pd composite membranes with enhanced hydrogen selectivity and superior high-temperature stability. Journal of environmental chemical engineering.DOI
131. Haitao Huang, Hongsheng Ding, Xuesong Xu, Xuxing Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). Strengthening effect of blocky phases and γ/γ interface in the directionally solidified high-Nb-containing TiAl alloy. Materials Science and Engineering A.DOI
132. Baoxian Su, Binbin Wang, Liangshun Luo, Liang Wang, Binqiang Li, Chen Liu, Yanqing Su, Yanjin Xu, Haiguang Huang, Jingjie Guo, Hengzhi Fu, Yu Zou (2022). Tuning microstructure and enhancing corrosion property of Ti-6Al-3Nb-2Zr-1Mo alloy through electron beam surface melting. Corrosion Science.DOI
133. Zhe Li, Liang Wang, Binbin Wang, Zhaobo Li, Zhiwen Li, Yong Zhang, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo (2022). Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 1000℃. Corrosion Science.DOI
134. Tong Liu, Ruirun Chen, Xuefeng Gao, Hongze Fang, Gang Qin, Yanqing Su, Jingjie Guo (2022). Formation of hypoeutectic structure and strengthening mechanism of Co4Cr1.5Fe1.5Ni5 high entropy alloy alloyed by Al. Journal of Alloys and Compounds.DOI
135. Yanan Wang, Binbin Wang, Liangshun Luo, Binqiang Li, Tong Liu, Junhao Zhao, Beibei Xu, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Laser-based powder bed fusion of pre-alloyed oxide dispersion strengthened steel containing yttrium. Additive manufacturing.DOI
136. Wenchao Cao, Xin Ding, Yong Zhang, Jiaxin Zhang, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Formation of AlNi phase and its influence on hydrogen absorption kinetics of Mg77Ni23-Al alloys at intermediate temperatures. International Journal of Hydrogen Energy.DOI
137. Lei Luo, Lei Luo, Zhongde Shan, Haoqin Yang, Yanqing Su, Liangshun Luo, Liangshun Luo, Liang Wang, Jingjie Guo, Hengzhi Fu (2022). Optimizing Ni-rich intermetallic and mechanical properties at room and elevated temperatures for Al-Cu-Ni alloys by coupling travelling magnetic fields with sequential solidification. Journal of Alloys and Compounds.DOI
138. Binqiang Li, Liang Wang, Binbin Wang, Donghai Li, J.P. Oliveira, Ran Cui, Jianxin Yu, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting. Materials & Design.DOI
139. Wenchao Cao, Xin Ding, Yong Zhang, Jiaxin Zhang, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Enhanced de-/hydrogenation kinetics of a hyper-eutectic Mg85Ni15-Ag alloy facilitated by Ag dissolving in Mg2Ni. Journal of Alloys and Compounds.DOI
140. Haitao Huang, Hongsheng Ding, Xuesong Xu, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). Microstructure transition of γ-TiAl alloys with abrupt cross-sections in yttria ceramic moulds during directional solidification by electromagnetic cold crucible. Journal of Materials Research and Technology.DOI
141. Lingyan Zhou, Hongze Fang, Xiaokang Yang, Ruirun Chen, Yongda Yan, Yong Zhang, Yanqing Su, Jingjie Guo (2022). Adjusting the γ/α2 and Ti2AlC phase on microstructure evolution and improving mechanical properties at room and elevated temperatures with the addition of Ta. Intermetallics.DOI
142. Baoxian Su, Binbin Wang, Liangshun Luo, Liang Wang, Binqiang Li, Chen Liu, Yanqing Su, Yanjin Xu, Haiguang Huang, Jingjie Guo, Hengzhi Fu, Yu Zou (2022). Tuning microstructure and improving the corrosion resistance of Ti-6Al-3Nb-2Zr-1Mo alloy using the electron beam freeform fabrication. Chemical Engineering Journal.DOI
143. Xuesong Xu, Hongsheng Ding, Haitao Huang, He Liang, Hao Guo, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). Twin and twin intersection phenomena in a creep deformed microalloyed directionally solidified high Nb containing TiAl alloy. Journal of Material Science and Technology.DOI
144. Binqiang Li, Liang Wang, Binbin Wang, Donghai Li, J.P. Oliveira, Ran Cui, Jianxin Yu, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Electron beam freeform fabrication of NiTi shape memory alloys: Crystallography, martensitic transformation, and functional response. Materials Science and Engineering A.DOI
145. Junhao Zhao, Binbin Wang, Tong Liu, Liangshun Luo, Yanan Wang, Xiaonan S. Zheng, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu, Dayong Chen (2022). Study of in situ formed quasicrystals in Al-Mn based alloys fabricated by SLM. Journal of Alloys and Compounds.DOI
146. Yong Yang, Binbin Wang, Yanjie Li, Baoxian Su, Liangshun Luo, Liang Wang, Haiguang Huang, Yanqing Su, Jingjie Guo (2022). Enhanced strength and corrosion resistance in as-cast TA10 alloys via interstitial carbon solute. Materials Research Express.DOI
147. Jiaxin Zhang, Xin Ding, Ruirun Chen, Wenchao Cao, Yanqing Su, Jingjie Guo (2022). Design of LPSO-introduced Mg96Y2Zn2 alloy and its improved hydrogen storage properties catalyzed by in-situ formed YH2. Journal of Alloys and Compounds.DOI
148. Yingmei Tan, Hongze Fang, Yangli Liu, Xuan Wang, Ruirun Chen, Feng Cao, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Regulating the macro/microstructure and mechanical properties of Ti2AlN/Ti46Al4Nb1Mo composites via ultrasonic treatment. Materials Science and Engineering A.DOI
149. Dezhi Chen, Qi Wang, Ruirun Chen, Shu Wang, Zhecheng Zhou, Qin Xu, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Microstructure and mechanical properties of Nb 16Si alloys with Zr additions. International Journal of Refractory Metals and Hard Materials.DOI
150. Zhiping Li, Liangshun Luo, Yanqing Su, Binbin Wang, Liang Wang, Tong Liu, Mengjia Yao, Chen Liu, Jingjie Guo, Hengzhi Fu (2022). In-situ study on γ phase transformation behaviour of γ-TiAl alloys at different cooling rates. Progress in Natural Science Materials International.DOI
151. Haoran Song, Xuesong Xu, Hongsheng Ding, Xuxing Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). Microstructure and nanomechanical behavior of individual phase in β-solidifying Ti-43Al-5Nb-3.5Cr-1Zr alloy. Journal of Materials Research and Technology.DOI
152. Xuefeng Gao, Ruirun Chen, Tong Liu, Hongze Fang, Gang Qin, Yanqing Su, Jingjie Guo (2022). High-entropy alloys: a review of mechanical properties and deformation mechanisms at cryogenic temperatures. Journal of Materials Science.DOI
153. Shiqiu Liu, Yaofeng Luo, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). Improved Fracture Toughness of Polycrystalline γ‐TiAl‐Based Intermetallic Alloys with a Favorable Deformation Mechanism of Twinning. Advanced Engineering Materials.DOI
154. Seung-Mi Kwak, JaeHwang Kim, Hongsheng Ding, Xuesong Xu, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). Machine learning prediction of the mechanical properties of γ-TiAl alloys produced using random forest regression model. Journal of Materials Research and Technology.DOI
155. Longhui Yao, Liang Wang, Xiao‐Jiao Song, Ran Cui, Binqiang Li, Qi Lv, Liangshun Luo, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Microstructure Evolution and Toughening Mechanism of a Nb-18Si-5HfC Eutectic Alloy Created by Selective Laser Melting. Materials.DOI
156. Lingyan Zhou, Hongze Fang, Ruirun Chen, Xiaokang Yang, Xiang Xin Xue, Yong Zhang, Yanqing Su, Jingjie Guo (2022). Effects of niobium and ultrasonic action coupling on microstructure evolution and mechanical properties of Ti46Al 2.6 C alloy. Journal of Alloys and Compounds.DOI
157. Xiangxin Yin, Xinzhong Li, Xiao Liang, Ruirun Chen, Hiromi Nagaumi, Bangsheng Li, Jingjie Guo, Dongmei Liu (2022). Substantial enhancement of hydrogen permeability of Mo2C/V composite membranes by ion beam sputtering. Journal of Membrane Science.DOI
158. Baoxian Su, Binbin Wang, Liangshun Luo, Liang Wang, Yanqing Su, Yanjin Xu, Binqiang Li, Ting Li, Haiguang Huang, Jingjie Guo, Hengzhi Fu, Yu Zou (2022). Corrosion behaviour of a wrought Ti-6Al-3Nb-2Zr-1Mo alloy in artificial seawater with various fluoride concentrations and pH values. Materials & Design.DOI
159. Ran Cui, Liang Wang, Longhui Yao, Binqiang Li, Yanqing Su, Liangshun Luo, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2022). On the solidification behaviors of AlCu5MnCdVA alloy in electron beam freeform fabrication: Microstructural evolution, Cu segregation and cracking resistance. Additive manufacturing.DOI
160. Donghai Li, Binbin Wang, Liangshun Luo, Xuewen Li, Jianxin Yu, Binqiang Li, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2022). Enhanced strength and fracture characteristics of the TiAl/Ti2AlNb laminated composite. Materials Science and Engineering A.DOI
161. 罗磊，夏宏营，骆良顺，苏彦庆，蔡超军，王亮，郭景杰，傅恒志（2021）. 行波磁场耦合顺序凝固改善ZL205A大型薄壁件缺陷及性能（英文）. Transactions of Nonferrous Metals Society of China.
162. 李斌强，王亮，姚龙辉，崔然，骆良顺，陈瑞润，苏彦庆，郭景杰，傅恒志（2021）. 高熵形状记忆合金的研究进展. 《稀有金属材料与工程》.
163. 徐莽，张相龙，耿小奇，刘国怀，王晔，王昭东，郭景杰（2021）. 定向凝固镍基单晶高温合金螺旋选晶过程显微组织与晶体的生长. 《特种铸造及有色合金》.DOI
164. 徐莽，刘国怀，张相龙，李泽宇，王丙兴，王昭东，郭景杰（2021）. 定向凝固DZ4125柱晶高温合金晶粒生长过程组织演化及其竞争生长行为. 《稀有金属材料与工程》.
165. 王亮，颜卉，陈云，骆良顺，苏彦庆，郭景杰（2021）. Fe代替V制备低成本钛合金:相体积分数的计算. 《哈尔滨工业大学学报》.
166. 王亮，李斌强，马威，崔然，王红英，姚龙辉，王斌斌，骆良顺，陈瑞润，苏彦庆，郭景杰（2021）. 选区激光熔化工艺参数对GH4169成形件表面品质的影响. 《特种铸造及有色合金》.DOI
167. 王亮，王红英，姚龙辉，崔然，李斌强，苏彦庆，郭景杰（2021）. 选区激光熔化Inconel 718合金的熔池形态与组织. 《特种铸造及有色合金》.DOI
168. Jiang-Lei Fan, Zexin Wei, Ying Li, Yan Wang, Shen Wu, Xiang-Kui Zhou, Jianxiu Liu, Jingjie Guo (2021). Lamellae Orientation Control and Mechanical Properties of Directionally Solidified Binary Ti-49Al Alloy in Oxide Ceramics Crucible. International Journal of Metals.DOI
169. Jiang-Lei Fan, Liu-Bo Liang, Ying Li, Shen Wu, Xiao Wang, Yuwen Li, Jianxiu Liu, Jingjie Guo (2021). Effect of lamellae orientation on tensile properties of directionally solidified Ti–46Al–0.5W–0.5Si alloy. Materials Science and Technology.DOI
170. Yanan Wang, Liangshun Luo, Liangshun Luo, T Liu, Binbin Wang, Lei Luo, Lei Luo, Junhao Zhao, Liang Wang, Hengzhi Fu, Guo Jingjie, Hengzhi Fu (2021). Tuning process parameters to optimize microstructure and mechanical properties of novel maraging steel fabricated by selective laser melting. Materials Science and Engineering A.DOI
171. Xuesong Xu, Hongsheng Ding, Haitao Huang, He Liang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Effect of V on the microstructure and brittle-to-ductile transition of directionally solidified high-Nb TiAl alloy. Intermetallics.DOI
172. Kunjun Zhu, Xinzhong Li, Yichi Zhang, Xiangjin Zhao, Zhongli Liu, Jingjie Guo (2021). Tailoring the hydrogen transport properties of highly permeable Nb51W5Ti23Ni21 alloy membrane by Pd substitution. International Journal of Hydrogen Energy.DOI
173. Xin Ding, Ruirun Chen, Jiaxin Zhang, Xiaoyu Chen, Yanqing Su, Jingjie Guo (2021). Achieving superior hydrogen storage properties via in-situ formed nanostructures: A high-capacity Mg–Ni alloy with La microalloying. International Journal of Hydrogen Energy.DOI
174. Xin Ding, Ruirun Chen, Jiaxin Zhang, Wenchao Cao, Yanqing Su, Jingjie Guo (2021). Recent progress on enhancing the hydrogen storage properties of Mg-based materials via fabricating nanostructures: A critical review. Journal of Alloys and Compounds.DOI
175. Jihao Wang, Tong Liu, Liangshun Luo, Xiaoye Cai, Binbin Wang, Junhao Zhao, Zonghui Cheng, Liang Wang, Yanqing Su, Xiang Xue, Jingjie Guo (2021). Selective laser melting of high-strength TiB2/AlMgScZr composites: microstructure, tensile deformation behavior, and mechanical properties. Journal of Materials Research and Technology.DOI
176. Hongze Fang, Lingyan Zhou, Shu Wang, Ruirun Chen, Qin Xu, Yongda Yan, Jingjie Guo (2021). Formation and kinds of boride on microstructure evolution and mechanical properties in Ti47.5Al2.0Cr2.0NbxB alloys. Intermetallics.DOI
177. Shu Wang, Hongze Fang, Ruirun Chen, Xiaokang Yang, Yinling Jin, Yanqing Su, Jingjie Guo (2021). Research of different mechanisms in the weak/strong acoustic active zones on microstructure evolution and mechanical property of Ti48Al2Cr2Nb2.5C composites. Journal of Alloys and Compounds.DOI
178. Xiao Liang, Xinzhong Li, Ruirun Chen, Hiromi Nagaumi, Jingjie Guo, Dongmei Liu (2021). Enhancement of hydrogen permeation stability at high temperatures for Pd/Nb30Ti35Co35/Pd composite membranes by HfN intermediate layer. Journal of Membrane Science.DOI
179. Binqiang Li, Liang Wang, Binbin Wang, Donghai Li, Ran Cui, Baoxian Su, Longhui Yao, Liangshun Luo, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication. Additive manufacturing.DOI
180. Donghai Li, Binbin Wang, Liangshun Luo, Xuewen Li, Yanjin Xu, Binqiang Li, Diween Hawezy, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). Effect of processing parameters on the microstructure and mechanical properties of TiAl/Ti2AlNb laminated composites. Journal of Material Science and Technology.DOI
181. Xujie Gao, Liang Wang, Nana Guo, Liangshun Luo, Guangming Zhu, Chengcheng Shi, Yanqing Su, Jingjie Guo (2021). Microstructure and mechanical properties of multi-phase reinforced Hf-Mo-Nb-Ti-Zr refractory high-entropy alloys. International Journal of Refractory Metals and Hard Materials.DOI
182. Baoxian Su, Binbin Wang, Liangshun Luo, Liang Wang, Yanqing Su, Yanjin Xu, Fuxin Wang, Baoshuai Han, Haiguang Huang, Jingjie Guo, Hengzhi Fu (2021). Effect of zirconium content on the microstructure and corrosion behavior of as-cast Ti-Al-Nb-Zr-Mo alloy. Journal of Materials Research and Technology.DOI
183. Dezhi Chen, Qi Wang, Ruirun Chen, Qin Xu, Shu Wang, Zhecheng Zhou, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). Effect of Co on microstructures and mechanical properties for Nb-Si based in-situ composites. Materials Characterization.DOI
184. Yinling Jin, Hongze Fang, Shu Wang, Ruirun Chen, Yanqing Su, Jingjie Guo (2021). Effects of Eu modification and heat treatment on microstructure and mechanical properties of hypereutectic Al–Mg2Si composites. Materials Science and Engineering A.DOI
185. Yongzhe Wang, Wei Li, Hong Yuan, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Microstructure refinement and improvement of mechanical properties of Ti46Al8Nb0.9B alloys by electromagnetic cold crucible continuous solidification. Intermetallics.DOI
186. Dezhi Chen, Qi Wang, Ruirun Chen, Zhecheng Zhou, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). Microstructure evolution and mechanical properties of ZrC-added Nb–16Si–20Ti alloys. Materials Science and Engineering A.DOI
187. Donghai Li, Binbin Wang, Liangshun Luo, Xuewen Li, Jianxin Yu, Liang Wang, Yanjin Xu, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). In-situ synthesis of Al2O3-reinforced high Nb–TiAl laminated composite with an enhanced strength-toughness performance. Ceramics International.DOI
188. Baoxian Su, Binbin Wang, Liangshun Luo, Liang Wang, Yanqing Su, Ting Li, Haiguang Huang, Jingjie Guo, Hengzhi Fu (2021). Significant enhancement of the corrosion performance of Ti-6Al-3Nb-2Zr-1Mo alloy via carbon addition in reducing acid environment. Materials Letters.DOI
189. Donghai Li, Binbin Wang, Liangshun Luo, Xuewen Li, Yanjin Xu, Binqiang Li, Liang Wang, Wenyi Liu, Baoshuai Han, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). The interface structure and its impact on the mechanical behavior of TiAl/Ti2AlNb laminated composites. Materials Science and Engineering A.DOI
190. Seung-Mi Kwak, JaeHwang Kim, Hongsheng Ding, Xuesong Xu, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Using multiple regression analysis to predict directionally solidified TiAl mechanical property. Journal of Material Science and Technology.DOI
191. Xuesong Xu, Hongsheng Ding, Wei Li, Haitao Huang, He Liang, Seung-Mi Kwak, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). The smooth and notched three-point bending fatigue behavior of directionally solidified high-Nb TiAl alloy. Materials Characterization.DOI
192. Yingmei Tan, Ruirun Chen, Hongze Fang, Yangli Liu, Hongzhi Cui, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). Enhanced strength and ductility in Ti46Al4Nb1Mo alloys via boron addition. Journal of Material Science and Technology.DOI
193. Xuesong Xu, Hongsheng Ding, Haitao Huang, He Liang, Seungmi Kawk, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Role of growth rate on microstructure evolution, element distribution and nanohardness of phases in directionally solidified multiphase high-Nb TiAl alloy. Journal of Materials Research and Technology.DOI
194. Junhao Zhao, Xiang Xin Xue, Binbin Wang, Tong Liu, Lei Luo, Lei Luo, Liangshun Luo, Liangshun Luo, Yanan Wang, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). Selective laser melting Al-3.4Mg-0.5Mn-0.8Sc-0.4Zr alloys: From melting pool to the microstructure and mechanical properties. Materials Science and Engineering A.DOI
195. Junhao Zhao, Liangshun Luo, Xiang Xue, Tong Liu, Lei Luo, Binbin Wang, Yanan Wang, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). The evolution and characterizations of Al3(ScxZr1-x) phase in Al–Mg-based alloys proceeded by SLM. Materials Science and Engineering A.DOI
196. Hongze Fang, Shu Wang, Ruirun Chen, Qin Xu, Yanqing Su, Yongda Yan, Jingjie Guo (2021). Effects of Heating Power on Microstructure Evolution and Tensile Properties at Elevated Temperature by Directional Solidification for Ti2AlC/TiAl Composites. Advanced Engineering Materials.DOI
197. Xin Ding, Ruirun Chen, Xiaoyu Chen, Hongze Fang, Qi Wang, Yanqing Su, Jingjie Guo (2021). A novel method towards improving the hydrogen storage properties of hypoeutectic Mg-Ni alloy via ultrasonic treatment. Journal of Magnesium and Alloys.DOI
198. Donghai Li, Binbin Wang, Liangshun Luo, Xuewen Li, Yanjin Xu, Binqiang Li, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2021). Design a novel TiAl/Ti2AlNb laminated composite with high toughness prepared by foil-foil metallurgy. Materials Letters.DOI
199. Shiqiu Liu, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Remarkable improvement in tensile strength of a polycrystalline γ-TiAl-based intermetallic alloy by deformation nanotwins. Materials Science and Engineering A.DOI
200. Xuesong Xu, Hongsheng Ding, Wei Li, Haitao Huang, He Liang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). The microstructure and high cycle fatigue performance of as-cast and directionally solidified Ti46Al7Nb alloy under the three-point bending loading. Materials Science and Engineering A.DOI
201. Xin Ding, Ruirun Chen, Xiaoyu Chen, Jianxin Pu, Yanqing Su, Jingjie Guo (2021). Study on the eutectic formation and its correlation with the hydrogen storage properties of Mg98Ni2-La alloys. International Journal of Hydrogen Energy.DOI
202. Shiqiu Liu, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Evolution of rapidly grown cellular microstructure during heat treatment of TiAl-based intermetallic and its effect on micromechanical properties. Intermetallics.DOI
203. Xuesong Xu, Hongsheng Ding, Haitao Huang, He Liang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Microstructure formation and columnar to equiaxed transition during cold crucible directional solidification of a high-Nb TiAl alloy. Journal of Materials Research and Technology.DOI
204. Kunjun Zhu, Zhongli Liu, Xiangjin Zhao, Erhu Yan, Xinzhong Li, Jingjie Guo (2021). The optimized composition and strong sustainability of hydrogen permeation of Nb30Ti35Co35 eutectic alloy membrane after 5 at%Fe substitution. International Journal of Hydrogen Energy.DOI
205. Xuesong Xu, Hongsheng Ding, Haitao Huang, He Liang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). Microstructure and elevated temperature tensile property of Ti–46Al–7Nb-(W,Cr,B) alloy compared with binary and ternary TiAl alloy. Materials Science and Engineering A.DOI
206. Yinling Jin, Hongze Fang, Shu Wang, Ruirun Chen, Yanqing Su, Jingjie Guo (2021). Improvement of Microstructure and Mechanical Properties of Near‐Eutectic Al–Mg2Si Alloys by Eu Addition. Advanced Engineering Materials.DOI
207. Xujie Gao, Liang Wang, Nana Guo, Liangshun Luo, Guangming Zhu, Chengcheng Shi, Yanqing Su, Jingjie Guo (2021). In-situ development of MB2 and their effect on microstructure and mechanical properties of refractory Hf0.5Mo0.5NbTiZr high entropy alloy matrix composites. International Journal of Refractory Metals and Hard Materials.DOI
208. Hongze Fang, Shu Wang, Ruirun Chen, Qin Xu, Yongda Yan, Yanqing Su, Jingjie Guo (2021). The effects of the formation of a multi-scale reinforcing phase on the microstructure evolution and mechanical properties of a Ti 2 AlC/TiAl alloy. Nanoscale.DOI
209. 丁鑫，陈瑞润，陈晓宇，曹文超，丁宏升，苏彦庆，郭景杰（2020）. 镁基储氢合金吸放氢机理及组织与性能调控. 《自然杂志》.
210. 杨勇，冯和平，王琪，陈瑞润，郭景杰，丁宏升，苏彦庆（2020）. 添加Fe元素改善TiAl-Nb合金的显微组织和力学性能（英文）. Transactions of Nonferrous Metals Society of China.
211. 李志平，苏宝献，陈才敏，骆良顺，王亮，苏彦庆，郭景杰（2020）. 高强耐蚀Ti-Al-Nb-Zr-Mo合金的成分优化及组织和力学性能研究. 《特种铸造及有色合金》.DOI
212. 李志平，骆良顺，孙雄凯，杨慧敏，刘桐，王亮，张东徽，苏彦庆，郭景杰，傅恒志（2020）. 热稳定处理时间对TNM合金糊状区组织的影响. 《稀有金属材料与工程》.
213. 吕琦，苏宝献，王妍，李志平，骆良顺，王亮，苏彦庆，郭景杰（2020）. Ti90及其优化合金的组织与力学性能研究. 《钛工业进展》.DOI
214. X.-J. Gao, Li-Shuan Wang, N. Guo, Liang-Shun Luo, G.-M. Zhu, C. Shi, Y.-Q. Su, Jingjie Guo (2020). Microstructure characteristics and mechanical properties of Hf0.5Mo0.5NbTiZr refractory high entropy alloy with Cr addition. International Journal of Refractory Metals and Hard Materials.DOI
215. Lei Luo, Liangshun Luo, Robert O. Ritchie, Yanqing Su, Binbin Wang, Liang Wang, Ruirun Chen, Guo Jingjie, Hengzhi Fu (2020). Optimizing the microstructures and mechanical properties of Al-Cu-based alloys with large solidification intervals by coupling travelling magnetic fields with sequential solidification. Journal of Material Science and Technology.DOI
216. Lei Luo, Liangshun Luo, Liangshun Luo, Liangshun Luo, Y W Su, Liang Su, Liang Wang, Rui Chen, Jingjie Guo, Hengzhi Fu (2020). Reducing porosity and optimizing performance for Al-Cu-based alloys with large solidification intervals by coupling travelling magnetic fields with sequential solidification. Journal of Material Science and Technology.DOI
217. Haitao Huang, Hongsheng Ding, Xuesong Xu, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2020). Phase transformation and microstructure evolution of a beta-solidified gamma-TiAl alloy. Journal of Alloys and Compounds.DOI
218. Zhiping Li, Liangshun Luo, Liangshun Luo, Yanqing Su, Lei Luo, Lei Luo, Binbin Wang, Liang Wang, Mengjia Yao, Jingjie Guo, Hengzhi Fu (2020). In-situ investigation of β/α transformation in β-solidifying γ-TiAl alloys at different cooling rates. Materials Letters.DOI
219. Lei Luo, Liangshun Luo, Liangshun Luo, Liangshun Luo, Y W Su, Liang Su, Liang Wang, Jingjie Guo, Hengzhi Fu (2020). Optimizing microstructure, shrinkage defects and mechanical performance of ZL205A alloys via coupling travelling magnetic fields with unidirectional solidification. Journal of Material Science and Technology.DOI
220. Baoxian Su, Binbin Wang, Liangshun Luo, Liang Wang, Yanqing Su, Fuxin Wang, Yanjin Xu, Baoshuai Han, Haiguang Huang, Jingjie Guo, Hengzhi Fu (2020). The corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy: Effects of HCl concentration and temperature. Journal of Material Science and Technology.DOI
221. Hongze Fang, Yanhang Liu, Shu Wang, Ruirun Chen, Hongzhi Cui, Yongda Yan, Jingjie Guo (2020). Effects of Solidification Rates on Microstructure Refinement and Elemental Distribution of Ti44Al6Nb1.0Cr2.0V0.1B0.15Y Alloy by Rapid Solidification. Advanced Engineering Materials.DOI
222. Yangli Liu, Xiang Xue, Hongze Fang, Yingmei Tan, Ruirun Chen, Hongzhi Cui, Yanqing Su, Jingjie Guo (2020). In-situ observation microstructure evolution and growth kinetics of lamellar γ phases in Ti44Al alloy during heat treatment. Journal of Materials Research and Technology.DOI
223. Kunjun Zhu, Xinzhong Li, Guohuai Liu, Yuxin Yang, Jingjie Guo, Zhaodong Wang, Dongmei Liu (2020). Improving hydrogen permeability and sustainability of Nb30Ti35Co35 eutectic alloy membrane by substituting Co using Fe. International Journal of Hydrogen Energy.DOI
224. Shiqiu Liu, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2020). Microstructural evolution and mechanical properties of a Cr-rich β-solidifying TiAl-based alloy prepared by electromagnetic cold crucible continuous casting. Materials Science and Engineering A.DOI
225. Shulin Dong, Xin Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2020). High-temperature deformation resistance and creep resistance of a TiAl-based alloy fabricated by cold crucible directional solidification technology. China Foundry.DOI
226. Yingmei Tan, Hongze Fang, Ruirun Chen, Yangli Liu, Yanqing Su, Jingjie Guo, Hongzhi Cui, Shuyan Zhang, Hengzhi Fu (2020). Microalloying effects of Ho on microstructure evolution and high temperature properties of Ti46Al4Nb1Mo alloy. Intermetallics.DOI
227. Yingmei Tan, Hongze Fang, Hongzhi Cui, Yangli Liu, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2020). Room and high temperature mechanical behavior of Ti–Al–Nb–Mo alloy reinforced with Ti2AlN ceramic particles. Materials Science and Engineering A.DOI
228. Zhiping Li, Donghui Zhang, Liangshun Luo, Binbin Wang, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2020). Microstructures and mechanical properties of Ti–44Al–5Nb–3Cr–1.5Zr–xMo–yB alloys. Journal of materials research/Pratt's guide to venture capital sources.DOI
229. Baoxian Su, Liangshun Luo, Binbin Wang, Yanqing Su, Liang Wang, Robert O. Ritchie, Enyu Guo, Ting Li, Huimin Yang, Haiguang Huang, Jingjie Guo, Hengzhi Fu (2020). Annealed microstructure dependent corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy. Journal of Material Science and Technology.DOI
230. Zhiping Li, Hong-ying Xia, Liangshun Luo, Binbin Wang, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2020). Effect of growth rate on microstructure and microhardness of directionally solidified Ti-44Al-5Nb-1.5Cr-1.5Zr-1Mo-0.1B alloy. China Foundry.DOI
231. Lei Luo, Lei Luo, Hongying Xia, Liangshun Luo, Liangshun Luo, Yanqing Su, Liang Wang, Jingjie Guo, Hengzhi Fu (2020). Microstructural Optimization of Fe‐Rich Intermetallic in Al–12 wt% Si–2 wt% Fe alloys by Adding Travelling Magnetic Fields. Advanced Engineering Materials.DOI
232. Lei Wang, Lei Wang, Liang Wang, Liang Wang, YingChun Tang, Lei Luo, Liangshun Luo, Yanqing Su, Jingjie Guo, Hengzhi Fu (2020). Microstructure and mechanical properties of CoCrFeNiW high entropy alloys reinforced by μ phase particles. Journal of Alloys and Compounds.DOI
233. Yong Yang, Feng He-ping, Qi Wang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su (2020). Improvement of microstructure and mechanical properties of TiAl−Nb alloy by adding Fe element. Transactions of Nonferrous Metals Society of China.DOI
234. Lei Luo, Liangshun Luo, Zhiping Li, Hong-ying Xia, Yanqing Su, Liang Wang, Jingjie Guo, Hengzhi Fu (2020). Microstructural evolution of Al-Cu-Li alloys with different Li contents by coupling of near-rapid solidification and two-stage homogenization treatment. China Foundry.DOI
235. Liang Wang, Luobin Zhang, Liangshun Luo, Binbin Wang, Hui Yu Yan, RuiRun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2020). Effect of melt hydrogenation on microstructure evolution and tensile properties of (TiB + TiC)/Ti-6Al-4V composites. Journal of Materials Research and Technology.DOI
236. Hongze Fang, Ruirun Chen, Yongda Yan, Qi Wang, Hongzhi Cui, Yanqing Su, Hongsheng Ding, Jingjie Guo (2020). Study on dispersion of Ti2AlC particle and formation of columnar crystal with different solidification rates during CCDS TiAl-based composite. Journal of Alloys and Compounds.DOI
237. Xin Ding, Ruirun Chen, Xiaoyu Chen, Wenchao Cao, Yanqing Su, Hongsheng Ding, Jingjie Guo (2020). Formation of Mg2Ni/Cu phase and de-/hydrogenation behavior of Mg91Ni9-Cu alloy at moderate temperatures. Renewable Energy.DOI
238. Liang Wang, Hui Yan, Jiliang Teng, Xiaodong Liu, Xuan Wang, Yanqing Su, Jingjie Guo (2020). Effect of hydrogen on interfacial reaction between Ti-6Al-4V alloy melt and graphite mold. Journal of Materials Research and Technology.DOI
239. Huiting Zheng, Qin Xu, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2020). Microstructure evolution and mechanical property of directionally solidified CoCrFeMnNi high entropy alloy. Intermetallics.DOI
240. Feifei Huang, Xinzhong Li, Xingrun Shan, Jingjie Guo, Fausto Gallucci, M. van Sint Annaland, Dongmei Liu (2020). Hydrogen transport through the V-Cr-Al alloys: Hydrogen solution, permeation and thermal-stability. Separation and Purification Technology.DOI
241. Xiao Liang, Xinzhong Li, Hiromi Nagaumi, Jingjie Guo, Fausto Gallucci, M. van Sint Annaland, Dongmei Liu (2020). Degradation of Pd/Nb30Ti35Co35/Pd hydrogen permeable membrane: A numerical description. Journal of Membrane Science.DOI
242. Binbin Wang, Liangshun Luo, Liangshun Luo, Fuyu Dong, Liang Wang, Hongying Wang, Fuxin Wang, Lei Luo, Lei Luo, Baoxian Su, Yanqing Su, Jingjie Guo, Hengzhi Fu (2020). Impact of hydrogen microalloying on the mechanical behavior of Zr-bearing metallic glasses: A molecular dynamics study. Journal of Material Science and Technology.DOI
243. Gang Qin, Ruirun Chen, Peter Kaehuei Liaw, Yanfei Gao, Liang Wang, Yanqing Su, Hongsheng Ding, Jingjie Guo, Xiaoqing Li (2020). An as-cast high-entropy alloy with remarkable mechanical properties strengthened by nanometer precipitates. Nanoscale.DOI
244. Yangli Liu, Xiang Xue, Hongze Fang, Yingmei Tan, Ruirun Chen, Yanqing Su, Jingjie Guo (2020). The growth behavior of columnar grains in a TiAl alloy during directional induction heat treatments. CrystEngComm.DOI
245. 唐迎春，罗磊，骆良顺，韩宝帅，苏彦庆，郭景杰，傅恒志（2019）. Cf增强Ti/Al基层状复合材料的组织与性能. 《稀有金属材料与工程》.
246. 褚楚，徐严谨，侯红亮，骆良顺，苏彦庆，郭景杰，傅恒志（2019）. Nb-16Si-22Ti-2Cr-2Al-2Hf-xFe合金热加工性能研究. 《稀有金属材料与工程》.
247. 陈占兴，丁宏升，陈瑞润，郭景杰，傅恒志（2019）. 脉冲电流作用下TiAl合金凝固组织演变及形成机理. 《金属学报》.
248. 唐迎春，罗磊，骆良顺，刘玉林，徐严谨，苏彦庆，郭景杰，傅恒志（2019）. Li含量对亚快速凝固2A97铝锂合金的性能及组织演变规律的影响（英文）. 《稀有金属材料与工程》.
249. 宋莉莉，骆良顺，徐严谨，王富鑫，罗磊，傅高升，苏彦庆，郭景杰（2019）. 行波磁场对ZL205A合金凝固组织及性能的影响. 《特种铸造及有色合金》.DOI
250. Gang Qin, Yufeng Zhang, Ruirun Chen, Huiting Zheng, Liang Wang, Yanqing Su, Hongsheng Ding, Guo Jingjie, Hengzhi Fu (2019). Microstructures and mechanical properties of (AlCoCrFeMn) 100 − x Cu x high-entropy alloys. Materials Science and Technology.DOI
251. Yangli Liu, Xiang Xue, Hongze Fang, Ruirun Chen, Yingmei Tan, Yanqing Su, Jingjie Guo (2019). Microstructure evolution of Ti44Al alloy during directional induction heat treatment and its effect on mechanical properties. Materials Science and Engineering A.DOI
252. Yong Yang, Hongze Fang, Ruirun Chen, Yanqing Su, Hongsheng Ding, Jingjie Guo (2019). A Comparative Study on Microstructure and Mechanical Properties of Ti‐43/46Al–5Nb–0.1B Alloys Modified by Mo. Advanced Engineering Materials.DOI
253. Hongze Fang, Ruirun Chen, Yangli Liu, Yingmei Tan, Yanqing Su, Hongsheng Ding, Jingjie Guo (2019). Effects of niobium on phase composition and improving mechanical properties in TiAl alloy reinforced by Ti2AlC. Intermetallics.DOI
254. Huiting Zheng, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2019). Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification. Journal of Material Science and Technology.DOI
255. Qi Wang, Ruirun Chen, Dezhi Chen, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2019). The characteristics and mechanisms of creep brittle-ductile transition in TiAl alloys. Materials Science and Engineering A.DOI
256. Yangli Liu, Xiang Xue, Ruirun Chen, Yingmei Tan, Yanqing Su, Hongsheng Ding, Jingjie Guo (2019). A novel method to prepare columnar grains of TiAl alloys by controlling induction heating. International Communications in Heat and Mass Transfer.DOI
257. Qiang Wang, Liangcai Zeng, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2019). Microstructures and mechanical properties of directionally solidified C-containing γ-TiAl alloys via electromagnetic cold crucible. Intermetallics.DOI
258. Yu-Min Hu, Xiaodong Liu, Nana Guo, Liang Wang, Yanqing Su, Jingjie Guo (2019). Microstructure and mechanical properties of NbZrTi and NbHfZrTi alloys. Rare Metals.DOI
259. Huiting Zheng, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2019). Phase separation of AlCoCrFeNi2.1 eutectic high-entropy alloy during directional solidification and their effect on tensile properties. Intermetallics.DOI
260. Xinzhong Li, Feifei Huang, Yanqing Su, Jingjie Guo, Markus Rettenmayr, Dongmei Liu (2019). Development of dual-phase V90Fe5Al5/Cu alloys for enhanced malleability and sustainable hydrogen permeability. Journal of Membrane Science.DOI
261. Gang Qin, Ruirun Chen, Peter Kaehuei Liaw, Yanfei Gao, Xiaoqing Li, Huiting Zheng, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2019). A novel face-centered-cubic high-entropy alloy strengthened by nanoscale precipitates. Scripta Materialia.DOI
262. Ruirun Chen, Xin Ding, Xiaoyu Chen, Xinzhong Li, Yanqing Su, Jingjie Guo, Hongsheng Ding, Hengzhi Fu (2019). In-situ hydrogen-induced evolution and de-/hydrogenation behaviors of the Mg93Cu7-Y alloys with equalized LPSO and eutectic structure. International Journal of Hydrogen Energy.DOI
263. Ruirun Chen, Qi Wang, Zhecheng Zhou, Yanqing Su, Jingjie Guo, Hongsheng Ding, Hengzhi Fu (2019). Microstructure, tensile properties and creep behavior of high-Al TiAlNb alloy using electromagnetic cold crucible continuous casting. Journal of Alloys and Compounds.DOI
264. Hongze Fang, Ruirun Chen, Yong Yang, Yingmei Tan, Yanqing Su, Hongsheng Ding, Jingjie Guo (2019). Effects of Boron On Microstructure Evolution and Mechanical Properties in Ti46Al8Nb2.6C0.8Ta Alloys. Advanced Engineering Materials.DOI
265. Kunjun Zhu, Xinzhong Li, Yuxin Yang, Ruirun Chen, Yanqing Su, Jingjie Guo, Dongmei Liu (2019). Hydrogen diffusivity of Nb56-xWxTi23Co21 alloys under non-dilute conditions and its analysis based on hydrogen chemical potential. Journal of Alloys and Compounds.DOI
266. Kunjun Zhu, Xinzhong Li, Zhifei Zhu, Ruirun Chen, Yanqing Su, Jingjie Guo, Markus Rettenmayr, Dongmei Liu (2019). Analysis of W/Mo alloying on hydrogen permeation performance of dual phase Nb-Ti-Ni alloys based on hydrogen chemical potentials. Journal of Membrane Science.DOI
267. Qiang Wang, Liangcai Zeng, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2019). On the high temperature deformation of a directionally solidified γ-TiAl alloy. Materials Science and Engineering A.DOI
268. Yingmei Tan, Ruirun Chen, Yangli Liu, Hongsheng Ding, Yanqing Su, Jingjie Guo, Hengzhi Fu (2019). Formation of Ti2AlN and TiB and its effect on mechanical properties of Ti46Al4Nb1Mo alloy by adding BN particles. Materials Science and Engineering A.DOI
269. Zhanxing Chen, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2019). An innovation for microstructural modification and mechanical improvement of TiAl alloy via electric current application. Scientific Reports.DOI
270. Yongzhe Wang, Hong Yuan, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu, Wei Li (2019). Effects of lamellar orientation on the fracture toughness of TiAl PST crystals. Materials Science and Engineering A.DOI
271. Yong Yang, Ruirun Chen, Hongze Fang, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2019). Improving microstructure and mechanical properties of Ti43Al5Nb0.1B alloy by addition of Fe. Rare Metals.DOI
272. Gang Qin, Wentian Xue, Ruirun Chen, Huiting Zheng, Liang Wang, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2019). Grain refinement and FCC phase formation in AlCoCrFeNi high entropy alloys by the addition of carbon. Materialia.DOI
273. Huiting Zheng, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2019). Transition of solid-liquid interface and tensile properties of CoCrFeNi high-entropy alloys during directional solidification. Journal of Alloys and Compounds.DOI
274. Gang Qin, Zibo Li, Ruirun Chen, Huiting Zheng, Chenlei Fan, Liang Wang, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2019). CoCrFeMnNi high-entropy alloys reinforced with Laves phase by adding Nb and Ti elements. Journal of materials research/Pratt's guide to venture capital sources.DOI
275. Gang Qin, Shu Wang, Ruirun Chen, Huiting Zheng, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2019). Improvement of Microstructure and Mechanical Properties of CoCrCuFeNi High-Entropy Alloys By V Addition. Journal of Materials Engineering and Performance.DOI
276. Liangshun Luo, Fuxin Wang, Xian‐Yu Meng, Yanjin Xu, Liang Wang, Yan‐Qing Su, Jingjie Guo, Hengzhi Fu (2019). Microstructures and properties of Nb–Si‐based alloys with B addition. Rare Metals.DOI
277. Hongze Fang, Ruirun Chen, Yong Yang, Yanqing Su, Hongsheng Ding, Jingjie Guo (2019). Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti 2 AlC. Research.DOI
278. 褚楚，徐严谨，侯红亮，骆良顺，苏彦庆，郭景杰（2018）. 高温高强铌硅合金的热变形本构方程. 《第八届中国航空学会青年科技论坛论文集》.
279. 苏彦庆，颜卉，王亮，骆良顺，李新中，郭景杰，傅恒志（2018）. 氢对金属有何作用. 《自然杂志》.
280. 骆良顺，王富鑫，吴晓明，王亮，苏彦庆，史亚鸣，郭景杰，傅恒志（2018）. 低成本Ti-Al-V-Fe-O合金热变形行为及热加工图. 《稀有金属材料与工程》.
281. 徐严谨，褚楚，侯红亮，韩宝帅，孟宪宇，骆良顺，苏彦庆，郭景杰，傅恒志（2018）. 超高温Nb-Si基复合材料研究现状. 《稀有金属材料与工程》.
282. 韩宝帅，骆良顺，孟宪宇，薛祥，王亮，苏彦庆，郭景杰（2018）. 吸铸TiAl基合金排气阀内部气孔缺陷产生原因分析. 《稀有金属材料与工程》.
283. 董鑫涛，刘贵仲，班煜峰，喻学谦，郭景杰（2018）. Ti元素对Al1.2FeCrCoNiTix高熵合金微观组织及硬度的影响. 《热加工工艺》.
284. 康慧君，李金玲，王同敏，郭景杰（2018）. 定向凝固Al-Mn-Be合金初生金属间化合物相生长行为及力学性能. 《金属学报》.
285. 苏彦庆，刘桐，李新中，陈瑞润，郭景杰，傅恒志（2018）. 籽晶法定向凝固TiAl基合金片层取向控制. 《金属学报》.
286. 陈瑞润，赵晓叶，杨勇，郭景杰，丁宏升，苏彦庆，傅恒志（2018）. Zr对二元钛铝合金组织和力学性能的影响（英文）. Transactions of Nonferrous Metals Society of China.
287. 褚楚，徐严谨，韩宝帅，孟宪宇，骆良顺，侯红亮，苏彦庆，郭景杰，傅恒志（2018）. Fe对Nb-16Si-22Ti-2Cr-2Al-2Hf合金组织与高温压缩性能影响研究. 《稀有金属材料与工程》.
288. Hongze Fang, Ruirun Chen, Yingmei Tan, Yong Yang, Yanqing Su, Hongsheng Ding, Jingjie Guo (2018). Boride Formation, Microstructure Evolution, and Mechanical Properties of Ti42Al6Nb2.6C0.8Ta Alloyed by Boron. Advanced Engineering Materials.DOI
289. Peng Peng, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). The diffusion-controlled remelting/resolidification process in directionally solidified Sn-Mn peritectic alloy. International Journal of Heat and Mass Transfer.DOI
290. YingChun Tang, Baoshuai Han, Liangshun Luo, Xinwei Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). Microstructure and Mechanical Properties of Bio‐Inspired Ti/Al/Al‐Cf Multilayered Composites. Advanced Engineering Materials.DOI
291. Hongze Fang, Ruirun Chen, Xiaoyu Chen, Yong Yang, Yanqing Su, Hongsheng Ding, Jingjie Guo (2018). Effect of Ta element on microstructure formation and mechanical properties of high-Nb TiAl alloys. Intermetallics.DOI
292. Gang Qin, Ruirun Chen, Huiting Zheng, Hongze Fang, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition. Journal of Material Science and Technology.DOI
293. Qi Wang, Ruirun Chen, Yaohua Yang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). High-throughput analysis of Al and Nb effects on mechanical behaviour of TiAl alloys using electromagnetic cold crucible continuous casting. Journal of Alloys and Compounds.DOI
294. Zhanxing Chen, Hongsheng Ding, Ruirun Chen, Shiqiu Liu, Jingjie Guo, Hengzhi Fu (2018). An innovative method for the microstructural modification of TiAl alloy solidified via direct electric current application. Journal of Material Science and Technology.DOI
295. Ruirun Chen, Xin Ding, Xiaoyu Chen, Xinzhong Li, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). Tunable eutectic structure and de-/hydrogenation behavior via Cu substitution in Mg-Ni alloy. Journal of Power Sources.DOI
296. Xiao‐Ye Zhao, Ruirun Chen, Yong Yang, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2018). Microstructure and mechanical properties of Ti43Al6Nb alloys with different zirconium contents. Rare Metals.DOI
297. Ruirun Chen, Xiaoye Zhao, Yong Yang, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2018). Effect of Zr on microstructure and mechanical properties of binary TiAl alloys. Transactions of Nonferrous Metals Society of China.DOI
298. Xin Ding, Ruirun Chen, Xiaoyu Chen, Xinzhong Li, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). Dependence and mechanism of hydrogenation behavior on absorption conditions in hypo-eutectic Mg–Ni–Cu alloy. International Journal of Hydrogen Energy.DOI
299. Xianyu Meng, Chen Liu, Yanxing Jiang, Fuxin Wang, Yanjin Xu, Yanqing Su, Jingjie Guo, Liangshun Luo (2018). Microstructure and high temperature compressive properties of Nb-based alloys fabricated by plasma arc-induction hybrid melting. Materials Research Express.DOI
300. Binbin Wang, Liangshun Luo, Enyu Guo, Yanqing Su, Mingyue Wang, Robert O. Ritchie, Fuyu Dong, Liang Wang, Jingjie Guo, Hengzhi Fu (2018). Nanometer-scale gradient atomic packing structure surrounding soft spots in metallic glasses. npj Computational Materials.DOI
301. Jieren Yang, Ruirun Chen, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2018). Optimization of electromagnetic energy in cold crucible used for directional solidification of TiAl alloy. Energy.DOI
302. Qi Wang, Ruirun Chen, Xue Gong, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). Microstructure, Mechanical Properties, and Crack Propagation Behavior in High-Nb TiAl Alloys by Directional Solidification. Metallurgical and Materials Transactions A.DOI
303. Hongze Fang, Ruirun Chen, Yong Yang, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2018). Role of graphite on microstructural evolution and mechanical properties of ternary TiAl alloy prepared by arc melting method. Materials & Design.DOI
304. Qi Wang, Ruirun Chen, Yong Yang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). Effects of grain size and precipitated phases on mechanical properties in TiAl gradient materials. Materials Science and Engineering A.DOI
305. Qi Wang, Ruirun Chen, Yaohua Yang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). Improvement of the creep lifetimes and microstructural stability of β-solidifying γ-TiAl by cold crucible directional solidification. Intermetallics.DOI
306. Yingmei Tan, Ruirun Chen, Hongze Fang, Yangli Liu, Hongsheng Ding, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). Microstructure evolution and mechanical properties of TiAl binary alloys added with SiC fibers. Intermetallics.DOI
307. Xuan Wang, Liang Wang, Fei Yang, Liangshun Luo, Hui Yu Yan, Xiaodong Liu, Xinzhong Li, RuiRun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). Hydrogen induced microstructure evolution of titanium matrix composites. International Journal of Hydrogen Energy.DOI
308. Ruirun Chen, Yingmei Tan, Hongze Fang, Liangshun Luo, Hongsheng Ding, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). Macro/microstructure evolution and mechanical properties of Ti33.3Al alloys by adding WC particles. Materials Science and Engineering A.DOI
309. Ruirun Chen, Xue Gong, You Wang, Gang Qin, Nannan Zhang, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2018). Microstructure and oxidation behaviour of plasma-sprayed NiCoCrAlY coatings with and without Ta on Ti44Al6Nb1Cr alloys. Corrosion Science.DOI
310. Qi Wang, Ruirun Chen, Yaohua Yang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). Effects of V and B, Y additions on the microstructure and creep behaviour of high-Nb TiAl alloys. Journal of Alloys and Compounds.DOI
311. Hongze Fang, Ruirun Chen, Xue Gong, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2018). Effects of Nb on Microstructure and Mechanical Properties of Ti42Al2.6C Alloys. Advanced Engineering Materials.DOI
312. Dongmei Liu, Xinzhong Li, Huiyuan Geng, Ruirun Chen, Markus Rettenmayr, Yanqing Su, Hui Li, Jingjie Guo, Hengzhi Fu (2018). Development of Nb35Mo5Ti30Ni30 alloy membrane for hydrogen separation applications. Journal of Membrane Science.DOI
313. Yaohua Yang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su (2018). Numerical analysis for electromagnetic field influence on heat transfer behaviors in cold crucible used for directional solidification. International Journal of Heat and Mass Transfer.DOI
314. Liang Wang, Xiaodong Liu, Ming Wang, WenChuang Liu, Xuan Wang, Fuxin Wang, Liangshun Luo, Yanqing Su, Jingjie Guo (2018). Effects of hydrogen on the interfacial reaction between Ti 6Al 4V alloy melt and Al2O3 ceramic shell. International Journal of Hydrogen Energy.DOI
315. Gang Qin, Shu Wang, Ruirun Chen, Xue Gong, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). Microstructures and mechanical properties of Nb-alloyed CoCrCuFeNi high-entropy alloys. Journal of Material Science and Technology.DOI
316. Qiang Wang, Hongsheng Ding, Hailong Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2018). Influence of Mn addition on the microstructure and mechanical properties of a directionally solidified γ-TiAl alloy. Materials Characterization.DOI
317. Fuxin Wang, Liangshun Luo, Xianyu Meng, Yanjin Xu, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2018). Morphological evolution of primary β-Nb5Si3 phase in Nb-Mo-Si alloys. Journal of Alloys and Compounds.DOI
318. Qi Wang, Ruirun Chen, Xue Gong, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2018). Microstructure control and creep behavior of Ti-47Al-6Nb-0.1C alloy by directional solidification. Intermetallics.DOI
319. Hailong Zhang, Hongsheng Ding, Ruirun Chen, Qiang Wang, Jingjie Guo, Hengzhi Fu (2018). A Novel Directional Solidification of TiAl-Based Alloys by Electromagnetic Cold Crucible Zone Melting Technology with Y2O3 Moulds. MATERIALS TRANSACTIONS.DOI
320. Shiqiu Liu, Hongsheng Ding, Hailong Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2018). High-density deformation nanotwin induced significant improvement in the plasticity of polycrystalline γ-TiAl-based intermetallic alloys. Nanoscale.DOI
321. 褚楚，徐严谨，韩宝帅，孟宪宇，骆良顺，侯红亮，苏彦庆，郭景杰，傅恒志（2017）. 电弧熔炼Nb-16Si-2Fe合金铸态组织及高温压缩行为. 《精密成形工程》.
322. 陈占兴，丁宏升，刘石球，陈瑞润，郭景杰，傅恒志（2017）. 直流电流对Ti-48Al-2Cr-2Nb合金组织和性能的影响. 《金属学报》.
323. 马腾飞，陈瑞润，郭景杰，丁宏升，苏彦庆，傅恒志（2017）. 高Nb-TiAl合金高温固态置氢组织与高温变形行为. 《稀有金属材料与工程》.
324. 刘东戎，王坦，郭景杰，李新中（2017）. Cr对Cu-V氢分离合金组织与氢传输性能的影响. 《材料科学与工艺》.
325. 吕国伟，苏彦庆，毕维生，郭景杰（2017）. 双边行波磁场铸造设备的开发. 《铸造技术》.DOI
326. 刘桐，骆良顺，王亮，李新中，陈瑞润，苏彦庆，郭景杰，傅恒志（2017）. TiAl基合金定向凝固中领先相的确定及影响因素研究进展. 《稀有金属材料与工程》.
327. 王国田，丁宏升，陈瑞润，郭景杰，傅恒志（2017）. 电流强度对冷坩埚定向凝固Ni3Al金属间化合物微观组织的影响. 《金属学报》.
328. 刘桐，骆良顺，吴晓明，王亮，史亚鸣，苏彦庆，郭景杰，傅恒志（2017）. Ti-6Al-2.5V-1.5Fe-0.15O合金热变形行为及组织演变. 《特种铸造及有色合金》.
329. 王亮，吴晓明，王富鑫，骆良顺，苏彦庆，史亚鸣，郭景杰，傅恒志（2017）. 热处理对Ti-6Al-2.5V-1.5Fe-0.15O合金组织及力学性能的影响. 《材料科学与工艺》.
330. 班煜峰，刘贵仲，董鑫涛，郭景杰（2017）. 热处理对AlFeCrCoNiMo高熵合金微观组织与硬度的影响. 《锻压技术》.
331. Jiang-Lei Fan, Jianxiu Liu, Shen Wu, S. Tian, Hong Gao, Shengyong Wang, Jingjie Guo, Xiao Wang (2017). Microstructure formation and interface characteristics of directionally solidified TiAl-Si alloys in alumina crucibles with a new Y2O3 skull-aided technology. Scientific Reports.DOI
332. Zheng Deshuang, Chen Ruirun, Ma Tengfei, Hongsheng Ding, Su Yanqing, Guo Jingjie, Hengzhi Fu (2017). Coupling Effects of Melt Treatment and Ultrasonic Treatment on Solidifying Microstructure and Mechanical Performance of Ti44Al6Nb1Cr Alloy. Metallurgical and Materials Transactions A.DOI
333. Zheng Deshuang, Chen Ruirun, Wang Jian, Ma Tengfei, Hongsheng Ding, Su Yanqing, Guo Jingjie, Hengzhi Fu (2017). Novel casting TiAl alloy with fine microstructure and excellent performance assisted by ultrasonic melt treatment. Materials Letters.DOI
334. Chen Ruirun, Zheng Deshuang, Ma Tengfei, Hongsheng Ding, Su Yanqing, Guo Jingjie, Hengzhi Fu (2017). Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl. Scientific Reports.DOI
335. Ruirun Chen, Yaohua Yang, Qi Wang, Hongsheng Ding, Yanqing Su, Jingjie Guo (2017). Dimensionless parameters controlling fluid flow in electromagnetic cold crucible. Journal of Materials Processing Technology.DOI
336. Yaohua Yang, Ruirun Chen, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2017). Efficient Melt Stirring Induced by the Coupled Effects of Alternating Magnetic Field and Configuration of Cold Crucible. Metallurgical and Materials Transactions B.DOI
337. Xianyu Meng, Liangshun Luo, Nana Guo, Mingxing Shi, Fuxin Wang, Yanjin Xu, Yanqing Su, Jingjie Guo (2017). Thermodynamic analysis of the interactions between Nb–Si alloy and molding material. Materials Research Express.DOI
338. Xin Ding, Ruirun Chen, Yinling Jin, Xiaoyu Chen, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2017). Activation mechanism and dehydrogenation behavior in bulk hypo/hyper-eutectic Mg-Ni alloy. Journal of Power Sources.DOI
339. Qi Wang, Ruirun Chen, Yaohua Yang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2017). Creep Behavior of High‐Nb TiAl Alloy at 800–900 °C by Directional Solidification. Advanced Engineering Materials.DOI
340. Yaohua Yang, Ruirun Chen, Qi Wang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2017). Dominant dimensionless parameters controlling solute transfer during electromagnetic cold crucible melting and directional solidifying TiAl alloys. International Communications in Heat and Mass Transfer.DOI
341. Ruirun Chen, Qi Wang, Yaohua Yang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2017). Brittle–ductile transition during creep in nearly and fully lamellar high-Nb TiAl alloys. Intermetallics.DOI
342. Qi Wang, Ruirun Chen, Yaohua Yang, Shiping Wu, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2017). Effects of lamellar spacing on microstructural stability and creep properties in β-solidifying γ-TiAl alloy by directional solidification. Materials Science and Engineering A.DOI
343. Hailong Zhang, Hongsheng Ding, Qiang Wang, Ruirun Chen, Jingjie Guo (2017). Microstructures and tensile properties of directionally solidified Ti-45Al-2Cr-2Nb alloy by electromagnetic cold crucible zone melting technology with Y2O3 moulds. Vacuum.DOI
344. Ruirun Chen, Gang Qin, Huiting Zheng, Liang Wang, Yanqing Su, Yu‐Lung Chiu, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2017). Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility. Acta Materialia.DOI
345. Gang Qin, Wentian Xue, Chenglei Fan, Ruirun Chen, Liang Wang, Yanqing Su, Hongsheng Ding, Jingjie Guo (2017). Effect of Co content on phase formation and mechanical properties of (AlCoCrFeNi)100-Co high-entropy alloys. Materials Science and Engineering A.DOI
346. Fuxin Wang, Liangshun Luo, Xianyu Meng, Yanjin Xu, Liang Wang, Song Lili, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). Microstructures and mechanical properties of melt hydrogenated Nb-Si based alloy. International Journal of Hydrogen Energy.DOI
347. Xuan Wang, Liang Wang, Liangshun Luo, Xiaodong Liu, YingChun Tang, Xinzhong Li, RuiRun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). Hot deformation behavior and dynamic recrystallization of melt hydrogenated Ti-6Al-4V alloy. Journal of Alloys and Compounds.DOI
348. Ruirun Chen, Yaohua Yang, Xue Gong, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu (2017). Numerical Research on Magnetic Field, Temperature Field and Flow Field During Melting and Directionally Solidifying TiAl Alloys by Electromagnetic Cold Crucible. Metallurgical and Materials Transactions B.DOI
349. Tengfei Ma, Ruirun Chen, Deshuang Zheng, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2017). Microstructure and mechanical properties of Ti44Al6Nb1Cr2V alloy after gaseous hydrogen charging at 1373–1693 K. Rare Metals.DOI
350. Hailong Zhang, Hongsheng Ding, Qiang Wang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2017). Comparison of a Directionally Solidified TiAl Alloy by Φ15 mm Cylindrical and 29 × 6 mm Plate Y2O3 Molds. JOM.DOI
351. Jianglei Fan, Chi Zhang, Shen Wu, Hongxia Gao, Xiao Wang, Jingjie Guo, Hengzhi Fu (2017). Effects of solidification parameters on the growth direction of α phase in directionally solidified Ti-49Al alloy. Intermetallics.DOI
352. Hongsheng Ding, Hailong Zhang, Qiang Wang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2017). Effect of Y2O3 particles on the fracture toughness of directionally solidified TiAl-based alloys. Materials Science and Engineering A.DOI
353. Feng Huang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su (2017). Removal of metal impurities in metallurgical grade silicon by cold crucible continuous melting and directional solidification. Separation and Purification Technology.DOI
354. Yaohua Yang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su (2017). Experimental and numerical investigation on mass transfer induced by electromagnetic field in cold crucible used for directional solidification. International Journal of Heat and Mass Transfer.DOI
355. Feng Huang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su (2017). Characterization of p-type multicrystalline silicon prepared by cold crucible continuous melting and directional solidification. Materials Science in Semiconductor Processing.DOI
356. Qiang Wang, Hongsheng Ding, Hailong Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2017). Variations of microstructure and tensile property of γ-TiAl alloys with 0–0.5 at% C additives. Materials Science and Engineering A.DOI
357. Fuxin Wang, Liangshun Luo, Yanjin Xu, Xianyu Meng, Liang Wang, Baoshuai Han, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). Effects of alloying on the microstructures and mechanical property of Nb-Mo-Si based in situ composites. Intermetallics.DOI
358. Hongsheng Ding, Guo-tian WANG, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2017). Microstructure and mechanical properties of Ni3Al intermetallics prepared by directional solidification electromagnetic cold crucible technique. China Foundry.DOI
359. Ruirun Chen, Yaohua Yang, Yaohua Yang, Hongze Fang, Yong Yang, Yong Yang, Qi Wang, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2017). Glass melting inside electromagnetic cold crucible using induction skull melting technology. Applied Thermal Engineering.DOI
360. Hong‐Ze Fang, Rui‐Run Chen, Dong Liang Chai, Yaohua Yang, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2017). Continuous Casting of TiAlNb Alloys with Different Velocities by Mixing Binary TiAl Ingot and Nb Wire. Advanced Engineering Materials.DOI
361. Qiang Wang, Hongsheng Ding, Hailong Zhang, Shiqiu Liu, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2017). Growth rates dependence of macro/microstructures and mechanical properties of Ti-47Al-2Nb-2Cr-0.2Er alloy directionally solidified by cold crucible. Materials & Design.DOI
362. Deshuang Zheng, Ruirun Chen, Tengfei Ma, Hongsheng Ding, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). Microstructure modification and mechanical performances enhancement of Ti44Al6Nb1Cr alloy by ultrasound treatment. Journal of Alloys and Compounds.DOI
363. Qiang Wang, Hongsheng Ding, Hailong Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2017). An investigation on the compressive strength enhancing mechanism of directionally solidified Ti-47Al-2Nb-2Cr-0.2Er alloy in case of cyclic loading. Materials Science and Engineering A.DOI
364. Xinzhong Li, Xiao Liang, Dongmei Liu, Ruirun Chen, Feifei Huang, Rui Wang, Markus Rettenmayr, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). Design of (Nb, Mo)40Ti30Ni30 alloy membranes for combined enhancement of hydrogen permeability and embrittlement resistance. Scientific Reports.DOI
365. Ruirun Chen, Deshuang Zheng, Tengfei Ma, Hongsheng Ding, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). Effects and mechanism of ultrasonic irradiation on solidification microstructure and mechanical properties of binary TiAl alloys. Ultrasonics Sonochemistry.DOI
366. Shiqiu Liu, Hongsheng Ding, Jingjie Guo, Hailong Zhang, Zhanxing Chen, Qiang Wang, Ruirun Chen, Hengzhi Fu (2017). Rapid Cellular Crystal Growth of TiAl-Based Intermetallic without Peritectic Reaction by Melt-Quenching in Ga–In Liquid. Crystal Growth & Design.DOI
367. Xuan Wang, Liang Wang, Liangshun Luo, Hui Yan, Xinzhong Li, RuiRun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). High temperature deformation behavior of melt hydrogenated (TiB + TiC)/Ti-6Al-4V composites. Materials & Design.DOI
368. Ruirun Chen, Hongze Fang, Xiaoyu Chen, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2017). Formation of TiC/Ti 2 AlC and α 2 +γ in in-situ TiAl composites with different solidification paths. Intermetallics.DOI
369. Xuan Wang, Liang Wang, Liangshun Luo, Yanjin Xu, Xinzhong Li, RuiRun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2017). Hydrogen induced softening and hardening for hot workability of (TiB + TiC)/Ti-6Al-4V composites. International Journal of Hydrogen Energy.DOI
370. Ruirun Chen, Hongze Fang, Dong Liang Chai, Yaohua Yang, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu (2017). A novel method to directional solidification of TiAlNb alloys by mixing binary TiAl ingot and Nb wire. Materials Science and Engineering A.DOI
371. Tengfei Ma, Ruirun Chen, Deshuang Zheng, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2017). Influence of high-temperature hydrogen charging on microstructure and hot deformability of binary TiAl alloys. Journal of Alloys and Compounds.DOI
372. Tengfei Ma, Ruirun Chen, Deshuang Zheng, Chang Liu, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2017). Hydrogenation behavior of Ti–44Al–6Nb alloy and its effect on the microstructure and hot deformability. Journal of materials research/Pratt's guide to venture capital sources.DOI
373. 丁宏升，李金韬，王强，耿洪滨，陈瑞润，郭景杰，傅恒志（2016）. 冷坩埚定向凝固TiAl基合金高温持久性能研究. 《航空制造技术》.
374. 吴强，郭景杰，侯乐干，吴玉彬（2016）. 纳米SiC包芯线对大型球铁铸件的孕育研究. 《哈尔滨工程大学学报》.
375. 谢红波，刘贵仲，郭景杰，周敏，刘德飘，毛炜乾（2016）. Al元素对AlxFeCrCoCuV高熵合金组织及摩擦性能的影响. 《材料工程》.
376. 谢红波，刘贵仲，郭景杰（2016）. Zr元素对AlFeCrCoCuZrx高熵合金组织及腐蚀性能的影响. 《材料工程》.
377. 杨劼人，陈瑞润，郭景杰，丁宏升，傅恒志（2016）. 高Nb-TiAl合金定向凝固研究现状及展望. 《稀有金属材料与工程》.
378. 谢红波，刘贵仲，郭景杰，周敏，刘德飘，毛炜乾（2016）. Ti对AlFeCrCoCu高熵合金组织及耐磨性能的影响. 《稀有金属材料与工程》.
379. 刘桐，骆良顺，王亮，李新中，苏彦庆，郭景杰，傅恒志（2016）. 铸态Ti-47Al(W,Si)合金组织演化及力学性能研究. 《特种铸造及有色合金》.
380. 王富鑫，骆良顺，王亮，张东徽，李新中，苏彦庆，郭景杰，傅恒志（2016）. 合金成分和冷却速率对Al-Cu合金凝固过程中初生Al2Cu相生长形貌的影响. 《金属学报》.
381. 刘桐，骆良顺，张延宁，苏彦庆，郭景杰，傅恒志（2016）. 定向凝固Al-Y合金组织演化规律及小平面相生长 Ⅱ.Al-53%Y包晶合金组织演化规律. 《金属学报》.
382. 骆良顺，刘桐，张延宁，苏彦庆，郭景杰，傅恒志（2016）. 定向凝固Al-Y合金组织演化规律及小平面相生长 Ⅰ.Al-15%Y过共晶合金组织演化规律. 《金属学报》.
383. 陈占兴，丁宏升，陈瑞润，郭景杰，傅恒志（2016）. 直流电流对TiAl合金凝固组织的影响. 《第三届全国电磁冶金与强磁场材料科学会议》.
384. 董书琳，王强，刘铁，陈瑞润，郭景杰，苏彦庆，丁宏升，傅恒志（2016）. 冷坩埚定向凝固高铌钛铝基合金变形抵抗能力研究. 《第三届全国电磁冶金与强磁场材料科学会议》.
385. 郝聪敏，刘贵仲，谢红波，董鑫涛，班煜峰，郭景杰（2016）. Cu对AlFeCrCoTiCux多组元高熵合金组织及其力学性能的影响. 《广西大学学报(自然科学版)》.
386. 谢红波，刘贵仲，郭景杰，周敏，毛炜乾，郝聪敏（2016）. 添加Al对AlxFeCrCoCuTi高熵合金组织与高温氧化性能的影响. 《稀有金属》.
387. 贾丽敏，梁志敏，徐达鸣，郭景杰（2016）. 离心力及铸件模数对Ti-6Al-4V合金组织与力学性能的影响（英文）. 《稀有金属材料与工程》.
388. Yongzhe Wang, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2016). Dependency of microstructure and microhardness on withdrawal rate of Ti-43Al-2Cr-2Nb alloy prepared by electromagnetic cold crucible directional solidification. China Foundry.DOI
389. Ruirun Chen, Tengfei Ma, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2016). Deformation behavior and microstructural evolution of hydrogenated Ti44Al6Nb alloy during thermo-compression at 1373–1523 K. Materials & Design.DOI
390. Xinzhong Li, Xiao Liang, Dongmei Liu, Ruirun Chen, Markus Rettenmayr, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). Microstructure dependent hydrogen permeability in eutectic Nb30Ti35Co35. International Journal of Hydrogen Energy.DOI
391. Ruirun Chen, Tengfei Ma, Zhiping Sun, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2016). The hydrogen absorption behavior of high Nb contained titanium aluminides under high pressure and temperature. International Journal of Hydrogen Energy.DOI
392. Peng Peng, Xinzhong Li, Jiangong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). Detachment of secondary dendrite arm in a directionally solidified Sn-Ni peritectic alloy under deceleration growth condition. Scientific Reports.DOI
393. Jieren Yang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2016). Temperature distribution in bottomless electromagnetic cold crucible applied to directional solidification. International Journal of Heat and Mass Transfer.DOI
394. Peng Peng, Xinzhong Li, Yanqing Su, Jingjie Guo (2016). Response of primary dendrite distribution to deceleration growth conditions in a Sn Ni peritectic alloy. Materials Chemistry and Physics.DOI
395. Xinzhong Li, Dongmei Liu, Xiao Liang, Ruirun Chen, Markus Rettenmayr, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). Hydrogen transport behavior of as-cast, cold rolled and annealed Nb40Ti30Co30 alloy membranes. Journal of Membrane Science.DOI
396. Peng Peng, Xinzhong Li, Jiangong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). On migration of primary/peritectic interface during interrupted directional solidification of Sn-Ni peritectic alloy. Scientific Reports.DOI
397. Peng Peng, Xinzhong Li, Jiangong Li, Yanqing Su, Jingjie Guo (2016). On oscillatory microstructure during cellular growth of directionally solidified Sn–36at.%Ni peritectic alloy. Scientific Reports.DOI
398. Qiang Wang, Hongsheng Ding, Hailong Zhang, Shiqiu Liu, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2016). Microstructure and compressive properties of directionally solidified Er-bearing TiAl alloy using cold crucible. Materials & Design.DOI
399. Liangshun Luo, Tong Liu, Kun Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). Microstructures, micro-segregation and solidification path of directionally solidified Ti-45Al-5Nb alloy. China Foundry.DOI
400. Tong Liu, Liangshun Luo, Liang Wang, Nana Guo, Xinzhong Li, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). Influence of thermal stabilization treatment on microstructure evolution of the mushy zone and subsequent directional solidification in Ti-43Al-3Si alloy. Materials & Design.DOI
401. Tong Liu, Liangshun Luo, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). Lamellar orientation control of Ti–47Al–0.5W–0.5Si by directional solidification using β seeding technique. Intermetallics.DOI
402. Tong Liu, Liangshun Luo, Yanqing Su, Liang Wang, Xinzhong Li, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2016). Effect of growth rate on microstructures and microhardness in directionally solidified Ti–47Al–1.0W–0.5Si alloy. Journal of materials research/Pratt's guide to venture capital sources.DOI
403. Limin Jia, Zhimin Liang, Daming Xu, Jingjie Guo (2016). Effects of Centrifugal Forces and Casting Modulus on Structures and Mechanical Properties of Ti-6Al-4V Alloy. 《稀有金属材料与工程》.DOI
404. Tengfei Ma, Ruirun Chen, Deshuang Zheng, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2016). Hydrogen-induced softening of Ti–44Al–6Nb–1Cr–2V alloy during hot deformation. International Journal of Hydrogen Energy.DOI
405. Tengfei Ma, Ruirun Chen, Deshuang Zheng, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2016). Effect of β-phase stabilizing elements and high temperature (1373–1693 K) on hydrogen absorption in TiAl alloys. International Journal of Hydrogen Energy.DOI
406. Xinzhong Li, Feifei Huang, Dongmei Liu, Xiao Liang, Ruirun Chen, Markus Rettenmayr, Yanqing Su, Jingjie Guo, Hengzhi Fu (2016). V-Cr-Cu dual-phase alloy membranes for hydrogen separation: An excellent combination of ductility, hydrogen permeability and embrittlement resistance. Journal of Membrane Science.DOI
407. Yongzhe Wang, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu, Jin-peng Lü (2016). A high-Nb TiAl alloy with highly refined microstructure and excellent mechanical properties fabricated by electromagnetic continuous casting. China Foundry.DOI
408. Peng Peng, Xinzhong Li, Yanqing Su, Jingjie Guo (2016). Migration of liquid phase from the primary/peritectic interface in a temperature gradient. Applied Physics Letters.DOI
409. 闫二虎，孙立贤，徐芬，李新中，郭景杰，傅恒志（2015）. Nb-ZrNi氢分离合金的组织和渗氢性能. 《第七届中国储能与动力电池及其关键材料学术研讨与技术交流会论文集》.
410. 董书琳，陈瑞润，郭景杰，丁宏升，苏彦庆，傅恒志（2015）. 铸态Ti44Al6Nb1.0Cr2.0V合金的显微组织及室温拉伸性能（英文）. Transactions of Nonferrous Metals Society of China.
411. 毛炜乾，刘贵仲，郭景杰，谢红波，郝聪敏（2015）. AlxCoCrFeNi2Tiy高熵合金高温氧化行为的研究. 《稀有金属与硬质合金》.
412. 刘德飘，刘贵仲，郭景杰（2015）. Ni元素对AlFeCoCrCuNix高熵合金组织及电化学腐蚀性能的影响. 《稀有金属与硬质合金》.
413. 谢红波，刘贵仲，郭景杰，毛炜乾，郝聪敏（2015）. AlFeCrCoCu多组元高熵合金组织与性能的研究. 《稀有金属与硬质合金》.
414. 谢红波，刘贵仲，郭景杰，毛炜乾，郝聪敏（2015）. 回火工艺对AlFeCrCoCu高熵合金组织及耐蚀性能的影响研究. 《稀有金属与硬质合金》.
415. 梁骁，郭景杰，李新中，苏彦庆，傅恒志（2015）. Nb30Hf35Ni35–xCox氢分离合金组织及其渗氢性能. 《上海大学学报(自然科学版)》.
416. 周敏，刘贵仲，郭景杰（2015）. AlxFeCrCoNi1-x合金组织结构及摩擦磨损性能研究. 《热加工工艺》.
417. 范学燚，王亮，杜志强，苏彦庆，骆良顺，张建兵，许纪刚，徐达鸣，郭景杰，傅恒志（2015）. 行波磁场励磁电流对薄壁件充型和表面缩陷的影响. 《稀有金属材料与工程》.
418. 刘国怀，张元，李新中，陈瑞润，苏彦庆，郭景杰，傅恒志（2015）. 生长速度对定向凝固Ti-50Al-6Nb合金微观组织演变及其硬度的影响. 《稀有金属材料与工程》.
419. 方虹泽，陈瑞润，Anton GETMAN，郭景杰，丁宏升，苏彦庆，傅恒志（2015）. 循环热处理对定向凝固Ti-46Al-6Nb合金组织和力学性能的影响（英文）. Transactions of Nonferrous Metals Society of China.
420. 李勇，刘国怀，王昭东，付天亮，李新中，苏彦庆，郭景杰，傅恒志（2015）. 定向凝固高Nb含量TiAl合金微观组织演化与溶质偏析规律. 《金属学报》.
421. 丁宏升，尚子博，王永喆，陈瑞润，郭景杰，傅恒志（2015）. 冷坩埚定向凝固Ti-47Al-2Cr-2Nb合金的拉伸与高周疲劳性能研究. 《金属学报》.
422. 樊江磊，吴深，王胜永，田淑侠，郭景杰，高红霞，刘建秀（2015）. 定向凝固过程TiAl合金片层取向的传递规律研究. 《2015中国铸造活动周》.
423. 谢红波，刘贵仲，郭景杰（2015）. Mn、V、Mo、Ti、Zr元素对AlFeCrCoCu-X高熵合金组织与高温氧化性能的影响. 《中国有色金属学报》.
424. 叶喜葱，赵光伟，吴海华，郭景杰，苏彦庆（2015）. 真空吸铸过程中TiAl合金熔体流动状态. 《航空材料学报》.
425. 范学燚，王亮，苏彦庆，骆良顺，贾丽敏，徐达鸣，郭景杰（2015）. 一种确定多晶材料微观组织片间距的数学模型(英文). 《稀有金属材料与工程》.
426. Chen Ruirun, Zheng Deshuang, Guo Jingjie, Ma Tengfei, Hongsheng Ding, Su Yanqing, Hengzhi Fu (2015). A novel method for grain refinement and microstructure modification in TiAl alloy by ultrasonic vibration. Materials Science and Engineering A.DOI
427. Huijun Kang, Zhonglue Hu, Xiaoxia Gao, Zongning Chen, Yiping Lu, Jinchuan Jie, Jingjie Guo (2015). 3D Morphology and Formation Process of the Icosahedral Quasicrystalline Phase in Rapidly Solidified Al–Mn Alloy. Acta Metallurgica Sinica (English Letters).DOI
428. Peng Peng, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2015). Microsegregation of peritectic systems in a temperature gradient: Analysis in directionally solidified Sn–36at.%Ni peritectic alloy. International Journal of Heat and Mass Transfer.DOI
429. Hongsheng Ding, Shiqiu Liu, Hailong Zhang, Jingjie Guo (2015). Improving impact toughness of a high chromium cast iron regarding joint additive of nitrogen and titanium. Materials & Design.DOI
430. Shulin Dong, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2015). Effect of heat treatment on microstructure and mechanical properties of cast and directionally solidified high-Nb contained TiAl-based alloys. Journal of materials research/Pratt's guide to venture capital sources.DOI
431. Peng Peng, Jieren Yang, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2015). Composition-dependent phase substitution in directionally solidified Sn-22at.%Ni peritectic alloy. Journal of Materials Science.DOI
432. Ruirun Chen, Shulin Dong, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2015). Investigation of macro/microstructure evolution and mechanical properties of directionally solidified high-Nb TiAl-based alloy. Materials & Design.DOI
433. Hongze Fang, Ruirun Chen, Xiaoyu Chen, Zhikun Ma, Hongsheng Ding, Jingjie Guo (2015). Microstructure and mechanical properties of Ti44Al6Nb alloys with different cerium contents. Rare Metals.DOI
434. Xinzhong Li, Dongmei Liu, Xiao Liang, Ruirun Chen, Markus Rettenmayr, Yanqing Su, Jingjie Guo, Hengzhi Fu (2015). Substantial enhancement of hydrogen permeability and embrittlement resistance of Nb30Ti25Hf10Co35 eutectic alloy membranes by directional solidification. Journal of Membrane Science.DOI
435. Jianglei Fan, Jianxiu Liu, Shuxia Tian, Shen Wu, Shengyong Wang, Hongxia Gao, Jingjie Guo, Xiao Wang, Yanqing Su, Hengzhi Fu (2015). Effect of solidification parameters on microstructural characteristics and mechanical properties of directionally solidified binary TiAl alloy. Journal of Alloys and Compounds.DOI
436. Hongsheng Ding, Yongzhe Wang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2015). Effect of growth rate on microstructure and tensile properties of Ti–45Al–2Cr–2Nb prepared by electromagnetic cold crucible directional solidification. Materials & Design.DOI
437. Ruirun Chen, Shulin Dong, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2015). Microstructure evolution and mechanical properties of directionally-solidified TiAlNb alloy in different temperature gradients. Journal of Alloys and Compounds.DOI
438. Shulin Dong, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2015). Deformation behavior and microstructural evolution of directionally solidified TiAlNb-based alloy during thermo-compression at 1373–1573K. Materials & Design.DOI
439. Xinzhong Li, Xiao Liang, Dongmei Liu, Ruirun Chen, Markus Rettenmayr, Yanqing Su, Jingjie Guo, Hengzhi Fu (2015). Microstructural stability and its effect on hydrogen permeability in equiaxed and directionally solidified eutectic Nb 30 Ti 35 Co 35 alloys. International Journal of Hydrogen Energy.DOI
440. Hongze Fang, Ruirun Chen, Getman ANTON, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2015). Effect of cyclic heat treatment on microstructures and mechanical properties of directionally solidified Ti–46Al–6Nb alloy. Transactions of Nonferrous Metals Society of China.DOI
441. Shulin Dong, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2015). Microstructure and room temperature tensile property of as-cast Ti44Al6Nb1.0Cr2.0V alloy. Transactions of Nonferrous Metals Society of China.DOI
442. Xinzhong Li, Dongmei Liu, Ruirun Chen, Erhu Yan, Xiao Liang, Markus Rettenmayr, Yanqing Su, Jingjie Guo, Hengzhi Fu (2015). Changes in microstructure, ductility and hydrogen permeability of Nb–(Ti, Hf)Ni alloy membranes by the substitution of Ti by Hf. Journal of Membrane Science.DOI
443. Guohuai Liu, Zhaodong Wang, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu, Guodong Wang (2015). Continued growth controlling of the non-preferred primary phase for the parallel lamellar structure in directionally solidified Ti–50Al–4Nb alloy. Journal of Alloys and Compounds.DOI
444. Peng Peng, Xinzhong Li, Jiangong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2015). Influence of solutal convection on solute distribution of melt during preparation of directionally solidified Sn–36 at.%Ni peritectic alloy. International Journal of Heat and Mass Transfer.DOI
445. Fan Xueyi, Liang Wang, Su Yanqing, Luo Liangshun, Jia Limin, Xu Daming, Guo Jingjie (2015). A Mathematical Model for Determination of Lamellar Spacing in Materials of Poly-Grain Microstructures. 《稀有金属材料与工程》.DOI
446. 王亮，张延宁，骆良顺，刘冬梅，苏彦庆，郭景杰，傅恒志（2014）. Al-Y包晶合金非平衡凝固过程及组织特征. 《中国材料进展》.
447. 王书杰，王亮，骆良顺，苏彦庆，董福宇，郭景杰，傅恒志（2014）. 低速包晶反应三相区重熔与凝固界面的稳定性(英文). Transactions of Nonferrous Metals Society of China.
448. 刘国怀，李新中，张元，陈瑞润，苏彦庆，郭景杰，傅恒志，王昭东，王国栋（2014）. 生长速度与试样直径对定向凝固Ti-46Al-8Nb合金显微组织和硬度的影响(英文). Transactions of Nonferrous Metals Society of China.
449. 陈晖，苏彦庆，骆良顺，李新中，郭景杰，傅恒志（2014）. 铸态全片层Ti-46Al-0.5W-0.5Si合金的室温力学性能. 《稀有金属材料与工程》.
450. 陈晖，苏彦庆，骆良顺，李新中，郭景杰，傅恒志（2014）. 热处理TiAl(W,Si)合金的拉伸性能及裂纹扩展. 《稀有金属材料与工程》.
451. 燕云程，丁宏升，宋尽霞，康永旺，陈瑞润，郭景杰（2014）. 工艺参数对电磁冷坩埚定向凝固Nb-Si基合金固液界面的影响. 《金属学报》.
452. 刘国怀，张元，李新中，陈瑞润，苏彦庆，郭景杰，傅恒志（2014）. 定向凝固Ti-52%Al合金热稳定处理及其对微观组织的影响. 《金属学报》.
453. 闫二虎，李新中，唐平，苏彦庆，郭景杰，傅恒志（2014）. Nb-Ti-Co氢分离合金近共晶点处的显微组织及其渗氢性能. 《金属学报》.
454. 丁宏升，燕云程，康永旺，宋尽霞，陈瑞润，郭景杰（2014）. 电磁冷坩埚定向凝固Nb-Si基多元合金微观组织. 《稀有金属材料与工程》.
455. Y.-Y. Liu, L.-G. Liu, Jingjie Guo, L.-L. Liu, Yan-Xiang Zhang, Y. Fang, Qingxiang Yang (2014). Casting speed optimal design of 304 stainless steel during twin roll strip casting process by 3D modelling.DOI
456. Ya-Lei Zhang, X. Li, G. Liu, Jingjie Guo, Y.-Q. Su, H. Fu (2014). Effect of boron doping on microstructure of directionally solidified Ti–46Al–2Cr–2Nb alloy.DOI
457. Chen Ruirun, Guo Jingjie, Xiaoyu Chen (2014). Progress in research on cold crucible directional solidification of titanium based alloys. DOAJ (DOAJ: Directory of Open Access Journals).
458. Shulin Dong, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2014). Effect of power on microstructure and mechanical properties of Ti44Al6Nb1.0Cr2.0V0.15Y0.1B alloy prepared by cold crucible directional solidification. Materials & Design (1980-2015).DOI
459. Peng Peng, Xinzhong Li, Jiangong Li, Yanqing Su, Dongmei Liu, Jingjie Guo (2014). On melt concentration at the solid/liquid interface during preparation of directionally solidified Sn–36 at.%Ni peritectic alloy. Fluid Phase Equilibria.DOI
460. Guohuai Liu, Xinzhong Li, Yuan Zhang, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu, Zhaodong Wang, Guodong Wang (2014). Effect of growth rate and diameter on microstructure and hardness of directionally solidified Ti–46Al–8Nb alloy. Transactions of Nonferrous Metals Society of China.DOI
461. Huijun Kang, Tongmin Wang, Yiping Lu, Jinchuan Jie, Xinzhong Li, Yanqing Su, Jingjie Guo (2014). Controllable 3D morphology and growth mechanism of quasicrystalline phase in directionally solidified Al–Mn–Be alloy. Journal of materials research/Pratt's guide to venture capital sources.DOI
462. Peng Peng, Xinzhong Li, Yanqing Su, Jiangong Li, Jingjie Guo, Hengzhi Fu (2014). Dependence of microhardness on solidification processing parameters and dendritic spacing in directionally solidified Sn–Ni peritectic alloys. Journal of Alloys and Compounds.DOI
463. Peng Peng, Yanqing Su, Xinzhong Li, Jiangong Li, Jingjie Guo, Hengzhi Fu (2014). Microstructural length scales in directionally solidified Sn-40 at.%Mn peritectic alloy containing intermetallic compounds. Intermetallics.DOI
464. Yongzhe Wang, Hongsheng Ding, Hailong Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2014). Microstructures and fracture toughness of Ti–(43–48)Al–2Cr–2Nb prepared by electromagnetic cold crucible directional solidification. Materials & Design (1980-2015).DOI
465. Shulin Dong, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Hengzhi Fu (2014). Microstructure control and mechanical properties of Ti44Al6Nb1.0Cr2.0V alloy by cold crucible directional solidification. Materials Science and Engineering A.DOI
466. Huijun Kang, Tongmin Wang, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2014). Faceted–nonfaceted growth transition and 3-D morphological evolution of primary Al 6 Mn microcrystals in directionally solidified Al–3 at.% Mn alloy. Journal of materials research/Pratt's guide to venture capital sources.DOI
467. Shu-jie WANG, Liang Wang, Liangshun Luo, Yanqing Su, Fuyu Dong, Jingjie Guo, Hengzhi Fu (2014). Stability of remelting and solidification interfaces of triple-phase region during peritectic reaction at lower speed. Transactions of Nonferrous Metals Society of China.DOI
468. Xinzhong Li, Erhu Yan, Markus Rettenmayr, Dongmei Liu, Yanqing Su, Jingjie Guo (2014). Hydrogen permeation behavior of Nb30Ti35Ni35−xCox (x = 0…35) alloys containing high fractions of eutectic. International Journal of Hydrogen Energy.DOI
469. Erhu Yan, Xinzhong Li, Dongmei Liu, Markus Rettenmayr, Yanqing Su, Jingjie Guo (2014). Nb–HfCo alloys with pronounced high hydrogen permeability: A new family of metallic hydrogen permeation membranes. International Journal of Hydrogen Energy.DOI
470. Dongmei Liu, Xinzhong Li, Yanqing Su, Markus Rettenmayr, Jingjie Guo, Hengzhi Fu (2014). Local melting/solidification during peritectic solidification in a steep temperature gradient: analysis of a directionally solidified Al–25at%Ni. Applied Physics A.DOI
471. Feng Huang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Jieren Yang, Hengzhi Fu (2014). Electrical resistivity distribution of silicon ingot grown by cold crucible continuous melting and directional solidification. Materials Science in Semiconductor Processing.DOI
472. Xinzhong Li, Peng Peng, Dongmei Liu, Yanqing Su, Jingjie Guo, Hengzhi Fu (2014). Dendrite coarsening in directionally solidified Sn–36 at.%Ni peritectic alloy in the presence of the migration of secondary dendrite arms. Materials Chemistry and Physics.DOI
473. Liang Wang, Liangshun Luo, Shiping Wu, Yanqing Su, Shujie Wang, Guotian Wang, Jingjie Guo, Hengzhi Fu (2014). The influence of melt hydrogenation on Ti600 alloy. International Journal of Hydrogen Energy.DOI
474. Erhu Yan, Xinzhong Li, Dongmei Liu, Yanqing Su, Jingjie Guo, Hengzhi Fu (2014). A skull-aided technique for directional solidification of Nb–41Ni–40Ti hydrogen permeable alloy. Journal of Crystal Growth.DOI
475. Erhu Yan, Xinzhong Li, Markus Rettenmayr, Dongmei Liu, Yanqing Su, Jingjie Guo, Daming Xu, Hengzhi Fu (2014). Design of hydrogen permeable Nb–Ni–Ti alloys by correlating the microstructures, solidification paths and hydrogen permeability. International Journal of Hydrogen Energy.DOI
476. 彭鹏，李新中，苏彦庆，刘冬梅，郭景杰，傅恒志（2013）. 定向凝固Sn-36%Ni包晶合金凝固组织特征长度的表征(英文). Transactions of Nonferrous Metals Society of China.
477. 陈瑞润，王纪超，马腾飞，郭景杰，丁宏升，苏彦庆，傅恒志（2013）. 冷坩埚定向凝固Ti44Al6Nb合金的组织演变规律. 《金属学报》.
478. 张元，刘国怀，李新中，陈瑞润，苏彦庆，郭景杰，傅恒志（2013）. 生长速度对定向凝固Ti-46Al-2Cr-2Nb合金领先相及微观组织的影响. 《金属学报》.
479. 张元，李新中，刘国怀，苏彦庆，郭景杰，傅恒志（2013）. 定向凝固Ti-46Al-2Cr-2Nb合金领先相及其生长取向与凝固进程的相关性. 《金属学报》.
480. 彭鹏，李新中，刘冬梅，苏彦庆，郭景杰，傅恒志（2013）. 定向凝固Al-12%Ni过共晶合金组织演化. 《金属学报》.
481. 董福宇，骆良顺，苏彦庆，郭景杰，傅恒志（2013）. 氢对非晶合金影响的研究进展. 《稀有金属材料与工程》.
482. 吕国伟，苏彦庆，毕维生，郭景杰，贾海风，张俊锐（2013）. 行波磁场作用下合金熔体的充型特点. 《铸造》.
483. 王书杰，苏彦庆，骆良顺，郭景杰，傅恒志（2013）. Cu-15.6Ge包晶合金中的两种分离组织. 《2013中国铸造活动周》.
484. 吕国伟，苏彦庆，毕维生，郭景杰，贾海风，张俊锐（2013）. 行波磁场铸造中合金熔体的充型规律. 《特种铸造及有色合金》.DOI
485. 骆良顺，韩宝帅，王亮，苏彦庆，冯明，郭景杰，傅恒志（2013）. 工艺参数对真空吸铸TiAl基合金连杆铸造过程的影响. 《材料科学与工艺》.
486. 葛大梁，刘贵仲，周敏，郭景杰（2013）. AlxCrFeNiCuVTi系高熵合金的组织和力学性能研究. 《热加工工艺》.
487. Jieren Yang, Ruirun Chen, Hongsheng Ding, Yanqing Su, Guo Jingjie, Feng Huang, Hengzhi Fu (2013). Uniformity analysis of magnetic field in an electromagnetic cold crucible used for directional solidification. COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering.DOI
488. Guo Jingjie (2013). Study on Microstructure and Mechanical Properties of Al_xCrFeNiCuVTi High-entropy Alloy. Rejiagong gongyi.
489. Shujie Wang, Liangshun Luo, Yanqing Su, Jingjie Guo, Hengzhi Fu (2013). A lateral remelting phenomenon of the primary phase below the temperature of peritectic reaction in directionally solidified Cu–Ge alloys. Journal of materials research/Pratt's guide to venture capital sources.DOI
490. Huijun Kang, Xinzhong Li, Tongmin Wang, Dongmei Liu, Yanqing Su, Zhonglve Hu, Jingjie Guo, Hengzhi Fu (2013). Crystal–quasicrystal transition depending on cooling rates in directionally solidified Al–3Mn–7Be (at.%) alloy. Intermetallics.DOI
491. Peng Peng, Xinzhong Li, Yanqing Su, Dongmei Liu, Jingjie Guo, Hengzhi Fu (2013). Characterization of microstructural length scales in directionally solidified Sn–36%Ni peritectic alloy. Transactions of Nonferrous Metals Society of China.DOI
492. Jieren Yang, Ruirun Chen, Hongsheng Ding, Jingjie Guo, Jiecai Han, Hengzhi Fu (2013). Heat transfer and macrostructure formation of Nb containing TiAl alloy directionally solidified by square cold crucible. Intermetallics.DOI
493. Jieren Yang, Ruirun Chen, Hongsheng Ding, Jingjie Guo, Yanqing Su, Hengzhi Fu (2013). Corrigendum to “Flow field and its effect on microstructure in cold crucible directional solidification of Nb containing TiAl alloy” [J. Mater. Process. Technol. 213 (8) (2013) 1355–1363]. Journal of Materials Processing Technology.DOI
494. Jieren Yang, Ruirun Chen, Hongsheng Ding, Jingjie Guo, Jiecai Han, Hengzhi Fu (2013). Thermal characteristics of induction heating in cold crucible used for directional solidification. Applied Thermal Engineering.DOI
495. Jieren Yang, Ruirun Chen, Hongsheng Ding, Jingjie Guo, Jiecai Han, Hengzhi Fu (2013). Mechanism and evolution of heat transfer in mushy zone during cold crucible directionally solidifying TiAl alloys. International Journal of Heat and Mass Transfer.DOI
496. Shujie Wang, Liangshun Luo, Yanqing Su, Fuyu Dong, Jingjie Guo, Hengzhi Fu (2013). Two-phase separated growth and peritectic reaction during directional solidification of Cu–Ge peritectic alloys. Journal of materials research/Pratt's guide to venture capital sources.DOI
497. Peng Peng, Xinzhong Li, Dongmei Liu, Yanqing Su, Jingjie Guo, Hengzhi Fu (2013). Secondary dendrite arm migration caused by temperature gradient zone melting in the directionally solidified Sn–40 at.% Mn peritectic alloy. Journal of materials research/Pratt's guide to venture capital sources.DOI
498. Jieren Yang, Ruirun Chen, Hongsheng Ding, Jingjie Guo, Yanqing Su, Hengzhi Fu (2013). Flow field and its effect on microstructure in cold crucible directional solidification of Nb containing TiAl alloy. Journal of Materials Processing Technology.DOI
499. Yuan Zhang, Xinzhong LI, Guohuai Liu, Yanqing Su, Jingjie Guo, Hengzhi Fu (2013). DEPENDENCE OF PRIMARY PHASE AND ITS GROWTHDIRECTION ON SOLIDIFICATION PROCESS INDIRECTIONALLY SOLIDIFIEDTi-46A1-2Cr-2Nb ALLOY. Acta Metallurgica Sinica.DOI
500. Peng Peng, Xinzhong LI, Dongmei Liu, Yanqing Su, Jingjie Guo, Hengzhi Fu (2013). MICROSTRUCTURE EVOLUTION OF DIRECTIONALLY SOLIDIFIED Al-12%Ni HYPEREUTECTIC ALLOY. Acta Metallurgica Sinica.DOI
501. Yuan Zhang, Guohuai Liu, Xinzhong LI, Ruirun Chen, Yanqing Su, Jingjie Guo, Hengzhi Fu (2013). EFFECTS OF GROWTH RATE ON PRIMARY PHASE AND MICROSTRUCTURES OF DIRECTIONALLY SOLIDIFIED Ti-46Al-2Cr-2Nb ALLOY. Acta Metallurgica Sinica.DOI
502. 陈瑞润，丁宏升，杨劼人，黄锋，苏彦庆，郭景杰，傅恒志（2012）. 冷坩埚连续熔化与定向凝固Ti50Al合金的温度场计算(英文). Transactions of Nonferrous Metals Society of China.
503. 叶喜葱，苏彦庆，郭景杰，张丽红，郝志江（2012）. 热处理对吸铸TiAl基合金铸件组织的影响. 《材料热处理学报》.
504. 樊江磊，李新中，苏彦庆，陈瑞润，郭景杰，傅恒志（2012）. 熔体热稳定处理对定向凝固Ti-46Al-0.5W-0.5Si合金组织和性能的影响(英文). Transactions of Nonferrous Metals Society of China.
505. 杨劼人，陈瑞润，丁宏升，苏彦庆，黄锋，郭景杰，傅恒志（2012）. 矩形冷坩埚定向凝固过程中钛铝熔体的流场数值计算(英文). Transactions of Nonferrous Metals Society of China.
506. 赵光伟，李新中，徐达鸣，郭景杰，傅恒志，杜勇，贺跃辉（2012）. 基于Thermo-Calc及T-fS-CL耦合方法预测Biot≤0.1的合金凝固路径（英文）. Transactions of Nonferrous Metals Society of China.
507. 刘江平，苏彦庆，骆良顺，陈晖，徐严谨，郭景杰，傅恒志（2012）. 箔冶金法制备γ-TiAl基波纹板(英文). Transactions of Nonferrous Metals Society of China.
508. 陈瑞润，杨劼人，丁宏升，黄锋，苏彦庆，郭景杰，傅恒志（2012）. 结构对连续熔化与定向凝固用冷坩埚磁场的影响(英文). Transactions of Nonferrous Metals Society of China.
509. 刘爱辉，李邦盛，隋艳伟，郭景杰（2012）. 钛熔体与氧化锆陶瓷铸型润湿性研究. 《稀有金属材料与工程》.
510. 苏彦庆，刘卫强，骆良顺，叶喜葱，郭景杰，傅恒志（2012）. TA15合金叶轮底漏式真空吸铸成形工艺研究. 《稀有金属材料与工程》.
511. 骆良顺，冯明，苏彦庆，李新中，郭景杰，傅恒志（2012）. TiAl基合金连杆件底漏式真空吸铸数值模拟. 《特种铸造及有色合金》.
512. 张铁军，苏彦庆，郭景杰，贾均，傅恒志（2012）. 移动磁场感应器及其在薄壁铝合金铸件中的应用. 《铸造技术》.
513. 徐严谨，苏彦庆，骆良顺，刘江平，陈晖，郭景杰，傅恒志（2012）. 磁场在材料凝固技术中的应用研究现状. 《稀有金属材料与工程》.
514. 赵光伟，李新中，徐达鸣，郭景杰，傅恒志，贺跃辉，杜勇（2012）. 热处理对不同冷速Al合金共晶相形貌及含量的影响. 《中国有色金属学报》.
515. 刘爱辉，李邦盛，隋艳伟，严丁根，郭景杰（2012）. 钛合金与铸型界面反应的研究进展. 《稀有金属材料与工程》.
516. 刘国怀，李新中，苏彦庆，陈瑞润，郭景杰，傅恒志（2012）. 定向凝固Ti-46Al-8Nb合金的微观组织演变与微观偏析(英文). Transactions of Nonferrous Metals Society of China.
517. 叶喜葱，苏彦庆，郭景杰，张丽红（2012）. 真空吸铸TiAl基合金组织研究. 《航空材料学报》.
518. 刘江平，苏彦庆，陈晖，骆良顺，徐严谨，郭景杰，傅恒志（2012）. 箔冶金法制备Ti-Al-W-Si合金板材. 《稀有金属材料与工程》.
519. 隋艳伟，袁芳，李邦盛，刘爱辉，郭景杰，傅恒志（2012）. 离心铸造钛合金熔体充型流动物理模拟相似理论及实验研究. 《稀有金属材料与工程》.
520. 杨慧敏，苏彦庆，骆良顺，陈辉，郭景杰，傅恒志（2012）. Fe和B元素对Ti-46Al合金柱状晶组织的影响(英文). 《稀有金属材料与工程》.
521. Ruirun Chen, Hongsheng Ding, Jieren Yang, Guo Jingjie, Xinzhong Li, Yanqing Su, Hengzhi Fu (2012). Directional Solidification of Ti6Al4V Ingots with an Electromagnetic Cold Crucible by Adjusting the Meniscus. ISIJ International.DOI
522. Hongsheng Ding, Nie Ge, Chen Ruirun, Guo Jingjie, Hengzhi Fu (2012). High temperature deformation behaviors of polysynthetically twinned (PST) Ti–47Al–2Cr–2Nb alloy. Materials Science and Engineering A.DOI
523. Peng Peng, Xinzhong Li, Yanqing Su, Dongmei Liu, Jingjie Guo, Hengzhi Fu (2012). Effect of peritectic reaction on the migration of secondary dendrite arms in the presence of tertiary dendrites: analysis of a directionally solidified Sn–36 at.%Ni peritectic alloy. Journal of Materials Science.DOI
524. Peng Peng, Xinzhong Li, Yanqing Su, Dongmei Liu, Jingjie Guo, Hengzhi Fu (2012). Primary dendrite distribution in directionally solidified Sn–36 at.% Ni peritectic alloy. Journal of materials research/Pratt's guide to venture capital sources.DOI
525. Erhu Yan, Xinzhong Li, Yanqing Su, Dongmei Liu, Daming Xu, Jingjie Guo, Hengzhi Fu (2012). Prediction of the solidification path of Al-4.37Cu-27.02Mg ternary eutectic alloy with a unified microsegregation model coupled with Thermo-Calc. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
526. Dongmei Liu, Xinzhong Li, Yanqing Su, Jingjie Guo, Liangshun Luo, Hengzhi Fu (2012). Influence of initial solid–liquid interface morphology on further microstructure evolution during directional solidification. Applied Physics A.DOI
527. Yanjin Xu, Yanqing Su, Liangshun Luo, Jiangping Liu, Jingjie Guo, Hengzhi Fu (2012). Study on in situ Al-Si functionally graded materials produced by traveling magnetic field. Science and Engineering of Composite Materials.DOI
528. Aihui Liu, Bangsheng Li, Yanwei Sui, Jingjie Guo (2012). Wettability of titanium on calcia-stabilized zirconia in electromagnetic field. Materials Letters.DOI
529. Hongsheng Ding, Ge Nie, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2012). Directional solidification of TiAl–W–Si alloy by electromagnetic confinement of melt in cold crucible. Intermetallics.DOI
530. Fuyu Dong, Yanqing Su, Liangshun Luo, Liang Wang, Shujie Wang, Jingjie Guo, Hengzhi Fu (2012). Enhanced plasticity in Zr-based bulk metallic glasses by hydrogen. International Journal of Hydrogen Energy.DOI
531. Guohuai Liu, Xinzhong Li, Yanqing Su, Dongmei Liu, Jingjie Guo, Hengzhi Fu (2012). Microstructure, microsegregation pattern and the formation of B2 phase in directionally solidified Ti–46Al–8Nb alloy. Journal of Alloys and Compounds.DOI
532. Fuyu Dong, Yanqing Su, Liangshun Luo, Jingjie Guo, Hengzhi Fu, Zhuoxi Li, Baoyi Wang (2012). Characterization of hydrogen-induced structural changes in Zr-based bulk metallic glasses using positron annihilation spectroscopy. Journal of materials research/Pratt's guide to venture capital sources.DOI
533. Yanqing Su, Fuyu Dong, Liangshun Luo, Jingjie Guo, Baoshuai Han, Zhuoxi Li, Baoyi Wang, Hengzhi Fu (2012). Bulk metallic glass formation: The positive effect of hydrogen. Journal of Non-Crystalline Solids.DOI
534. Yanqing Su, Dongmei Liu, Xinzhong Li, Liangshun Luo, Jingjie Guo, Hengzhi Fu (2012). Isothermal Peritectic Coupled Growth in Directionally Solidified Cu-20 wt pct Sn Alloy. Metallurgical and Materials Transactions A.DOI
535. Yanqing Su, Shujie Wang, Liangshun Luo, Jinchuan Jie, Jingjie Guo, Hengzhi Fu (2012). Morphological characteristics of triple junction region and process of the peritectic reaction during directional solidification of Cu–Ge alloys. Journal of Alloys and Compounds.DOI
536. Fuyu Dong, Yanqing Su, Liangshun Luo, Liang Wang, Shujie Wang, Jingjie Guo, Hengzhi Fu (2012). Deoxidation of bulk metallic glasses by hydrogen arc melting. Materials Letters.DOI
537. Guohuai Liu, Xinzhong Li, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2012). Microstructure and microsegregation in directionally solidified Ti–46Al–8Nb alloy. Transactions of Nonferrous Metals Society of China.DOI
538. Peng Peng, Xinzhong Li, Yanqing Su, Dongmei Liu, Jingjie Guo, Hengzhi Fu (2012). Effect of peritectic reaction on dendrite coarsening in directionally solidified Sn–36 at.%Ni alloy. Journal of Materials Science.DOI
539. Hongsheng Ding, Ge Nie, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2012). Influence of oxygen on microstructure and mechanical properties of directionally solidified Ti–47Al–2Cr–2Nb alloy. Materials & Design (1980-2015).DOI
540. Ruirun Chen, Jieren Yang, Hongsheng Ding, Feng Huang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2012). Magnetic field in a near-rectangular cold crucible designed for continuously melting and directionally solidifying TiAl alloys. Journal of Materials Processing Technology.DOI
541. Jianglei Fan, Xinzhong Li, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2012). Effect of thermal stabilization on microstructure and mechanical property of directionally solidified Ti–46Al–0.5W–0.5Si alloy. Transactions of Nonferrous Metals Society of China.DOI
542. Dongmei Liu, Xinzhong Li, Yanqing Su, Liangshun Luo, Jingjie Guo, Hengzhi Fu (2012). Solute redistribution during planar growth of intermetallic compound with nil solubility. Intermetallics.DOI
543. Ge Nie, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2012). Microstructural control and mechanical properties of Ti–47Al–2Cr–2Nb alloy by directional solidification electromagnetic cold crucible technique. Materials & Design (1980-2015).DOI
544. Dongmei Liu, Xinzhong Li, Yanqing Su, Peng Peng, Liangshun Luo, Jingjie Guo, Hengzhi Fu (2012). Secondary dendrite arm migration caused by temperature gradient zone melting during peritectic solidification. Acta Materialia.DOI
545. Ruirun Chen, Hongsheng Ding, Jieren Yang, Feng Huang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2012). Temperature field calculation on cold crucible continuous melting and directional solidifying Ti50Al alloys. Transactions of Nonferrous Metals Society of China.DOI
546. Xinzhong Li, Jianglei Fan, Yanqing Su, Dongmei Liu, Jingjie Guo, Hengzhi Fu (2012). Lamellar orientation and growth direction of α phase in directionally solidified Ti-46Al-0.5W-0.5Si alloy. Intermetallics.DOI
547. Limin Jia, Daming Xu, Min Li, Jingjie Guo, Hengzhi Fu (2012). Casting defects of Ti-6Al-4V alloy in vertical centrifugal casting processes with graphite molds. Metals and Materials International.DOI
548. Ruirun Chen, Jieren Yang, Hongsheng Ding, Feng Huang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2012). Effect of configuration on magnetic field in cold crucible using for continuous melting and directional solidification. Transactions of Nonferrous Metals Society of China.DOI
549. Feng Huang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Jieren Yang, Hengzhi Fu (2012). Feasibility of directional solidification of silicon ingot by electromagnetic casting. Materials Science in Semiconductor Processing.DOI
550. Huijun Kang, Xinzhong Li, Yanqing Su, Dongmei Liu, Jingjie Guo, Hengzhi Fu (2012). 3-D morphology and growth mechanism of primary Al6Mn intermetallic compound in directionally solidified Al-3at.%Mn alloy. Intermetallics.DOI
551. Aihui Liu, Bangsheng Li, Dinggen Yan, Jingjie Guo (2012). Wettability of Ti6Al4V on calcia-stabilized zirconia. Materials Letters.DOI
552. Jieren Yang, Ruirun Chen, Hongsheng Ding, Yanqing Su, Feng Huang, Jingjie Guo, Hengzhi Fu (2012). Numerical calculation of flow field inside TiAl melt during rectangular cold crucible directional solidification. Transactions of Nonferrous Metals Society of China.DOI
553. Jiangping Liu, Yanqing Su, Liangshun Luo, Hui Chen, Yanjin Xu, Jingjie Guo, Hengzhi Fu (2012). Fabrication of wavy γ-TiAl based sheet with foil metallurgy. Transactions of Nonferrous Metals Society of China.DOI
554. Guangwei Zhao, Xinzhong Li, Daming Xu, Jingjie Guo, Hengzhi Fu, Yong Du, Yuehui He (2012). Thermo-Calc and T—fS—CL coupling based method to determine solidification paths of alloys solidified under condition of Biot≤0.1. Transactions of Nonferrous Metals Society of China.DOI
555. Yang Huimin, Su Yanqing, Luo Liangshun, Hui Chen, Guo Jingjie, Hengzhi Fu (2012). Influences of Fe and B on the Columnar Structure of Ti-46Al Alloys. 《稀有金属材料与工程》.DOI
556. 徐严谨，苏彦庆，骆良顺，李新中，刘江平，郭景杰，陈瑞润，傅恒志（2011）. 行波磁场作用对凝固过程中气泡的影响(英文). Transactions of Nonferrous Metals Society of China.
557. 黄锋，陈瑞润，郭景杰，丁宏升，杨劼人，苏彦庆，傅恒志（2011）. 冷坩埚原理及其在多晶硅制备中的应用. 《材料工程》.
558. 刘江平，骆良顺，苏彦庆，徐严谨，李新中，陈瑞润，郭景杰，傅恒志（2011）. Ti/Al扩散偶中间相长大过程的数值模拟(英文). Transactions of Nonferrous Metals Society of China.
559. 骆良顺，张宇民，苏彦庆，王新，郭景杰，傅恒志（2011）. 包晶合金定向凝固过程中的对流效应及带状组织形成机制 Ⅰ.实验结果. 《金属学报》.
560. 刘江平，苏彦庆，徐严谨，骆良顺，郭景杰，傅恒志（2011）. Ti/Al固态扩散偶中初生相的选择(英文). 《稀有金属材料与工程》.
561. 闫二虎，李新中，徐达鸣，赵光伟，周建新，郭景杰，傅恒志（2011）. Al-11.80Cu-24.22Mg三元包共晶合金的凝固机制. 《金属学报》.
562. 王亮，苏彦庆，王书杰，骆良顺，郭景杰，傅恒志（2011）. 液态置氢对TC21合金组织及硬度的影响. 《稀有金属材料与工程》.
563. 苏志付，孔力明，骆良顺，苏彦庆，李新中，郭景杰（2011）. 铝合金管类铸件气密性缺陷研究. 《第十二届全国铸造年会暨2011中国铸造活动周》.
564. 骆良顺，傅恒志，张宇民，李新中，苏彦庆，郭景杰（2011）. 包晶合金定向凝固过程中的对流效应及带状组织形成机制 Ⅱ.理论分析. 《金属学报》.
565. 丁宏升，张永，姜三勇，陈瑞润，郭景杰（2011）. 稳恒电场对小晶面晶体生长的影响. 《材料科学与工艺》.
566. 吕国伟，苏彦庆，毕维生，郭景杰（2011）. 行波磁场铸造表面粗糙缺陷的成因与控制. 《铸造技术》.
567. 叶喜葱，苏彦庆，郭景杰，张月红，傅恒志（2011）. TiAl基合金叶片吸铸成形缺陷的数值模拟. 《稀有金属材料与工程》.
568. 杨慧敏，苏彦庆，骆良顺，陈晖，郭景杰，傅恒志（2011）. TiAl基合金的定向凝固:Ti-50Al-5Nb合金初生相的确定(英文). 《稀有金属材料与工程》.
569. 李琨，苏彦庆，骆良顺，李新中，郭景杰，傅恒志（2011）. 定向凝固Ti-45Al-5Nb合金的组织演化规律. 《第十二届全国铸造年会暨2011中国铸造活动周论文集》.
570. 苏志付，骆良顺，苏彦庆，李新中，郭景杰，傅恒志（2011）. 铝合金旋转喷吹精炼过程气泡运动的数值模拟. 《第十二届全国铸造年会暨2011中国铸造活动周论文集》.
571. 郭景杰，苏彦庆，丁宏升，李克锐，张忠仇，曾艺成，蔡启舟，许庆彦，单忠德，叶升平，苏仕方（2011）. 铸造成形领域科学技术发展研究. 《第十二届全国铸造年会暨2011中国铸造活动周论文集》.
572. 吴士平，郭景杰，张军，傅恒志（2011）. 钛合金铸件精密成形理论与技术研究进展. 《中国材料进展》.
573. Guo Jingjie (2011). Optimization and Control on Rough Surface Defect in Traveling Magnetic Field Casting Process. Rejiagong gongyi.
574. Guo Jingjie (2011). Effects of steady electric field on faceted crystal growth. Materials Science and Technology.
575. Zhi Ping Sun, Yanwei Sui, Aihui Liu, Bangsheng Li, Jingjie Guo (2011). RESEARCH OF MECHANICAL PROPERTY GRADIENT DISTRIBUTION OF Al-Cu ALLOY IN CENTRIFUGAL CASTING. Surface Review and Letters.DOI
576. Feng Huang, Ruirun Chen, Jingjie Guo, Hongsheng Ding, Yanqing Su, Jieren Yang, Hengzhi Fu (2011). Experimental study on surface quality of silicon ingots prepared by electromagnetic continuous casting. Materials Science in Semiconductor Processing.DOI
577. Jianglei Fan, Xinzhong Li, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2011). Dependency of microstructure parameters and microhardness on the temperature gradient for directionally solidified Ti–49Al alloy. Materials Chemistry and Physics.DOI
578. Jianglei Fan, Xinzhong Li, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2011). Microstructure evolution of directionally solidified Ti–46Al–0.5W–0.5Si alloy. Journal of Crystal Growth.DOI
579. Ruirun Chen, Feng Huang, Jingjie Guo, Hongsheng Ding, Jieren Yang, Hengzhi Fu (2011). Experimental study on hot melt splashes during electromagnetic continuous casting silicon. Vacuum.DOI
580. Dongmei Liu, Xinzhong Li, Yanqing Su, Liangshun Luo, Bo Zhang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2011). An analysis of non-equilibrium peritectic reaction driven by solute diffusion under a temperature gradient. Journal of Crystal Growth.DOI
581. Yanjin Xu, Yanqing Su, Liangshun Luo, Xinzhong Li, Jiangping Liu, Jingjie Guo, Ruirun Chen, Hengzhi Fu (2011). Effect of traveling magnetic field on gas porosity during solidification. Transactions of Nonferrous Metals Society of China.DOI
582. Guangwei Zhao, Xinzhong Li, Daming Xu, Jingjie Guo, Hengzhi Fu, Yong Du, Yuehui He (2011). Numerical computations for temperature, fraction of solid phase and composition couplings in ternary alloy solidification with three different thermodynamic data-acquisition methods. Calphad.DOI
583. Ruirun Chen, Feng Huang, Jingjie Guo, Hongsheng Ding, Yanqing Su, Jieren Yang, Hengzhi Fu (2011). Effect of parameters on the grain growth of silicon ingots prepared by electromagnetic cold crucible continuous casting. Journal of Crystal Growth.DOI
584. Jianglei Fan, Xinzhong Li, Yanqing Su, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2011). Directional solidification of Ti–49 at.%Al alloy. Applied Physics A.DOI
585. Jianglei Fan, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2011). Effect of growth rate on microstructure parameters and microhardness in directionally solidified Ti–49Al alloy. Materials & Design (1980-2015).DOI
586. Huijun Kang, Shiping Wu, Xinzhong Li, Jingjie Guo, Ye Wang (2011). Improvement of microstructure and mechanical properties of Mg–8Gd–3Y by adding Mg3Zn6Y icosahedral phase alloy. Materials Science and Engineering A.DOI
587. Dongmei Liu, Xinzhong Li, Yanqing Su, Liangshu Luo, Bo Zhang, Jingjie Guo, Hengzhi Fu (2011). Directional solidification of Cu–20Sn alloy at low speed: From peritectic coupled growth to banding. Materials Letters.DOI
588. Jiangping Liu, Liangshun Luo, Yanqing Su, Yanjing Xu, Xinzhong Li, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2011). Numerical simulation of intermediate phase growth in Ti/Al alternate foils. Transactions of Nonferrous Metals Society of China.DOI
589. Jiangping Liu, Yanqing Su, Yanjin Xu, Liangshun Luo, Jingjie Guo, Hengzhi Fu (2011). First Phase Selection in Solid Ti/Al Diffusion Couple. 《稀有金属材料与工程》.DOI
590. Yang Huimin, Su Yanqing, Luo Liangshun, Hui Chen, Guo Jingjie, Hengzhi Fu (2011). Directional Solidification of TiAl-Based Alloys: Determination of the Primary Phase in Ti-50Al-5Nb Alloy. 《稀有金属材料与工程》.DOI
591. Xinzhong Li, Dongmei Liu, Tao Sun, Yanqing Su, Jingjie Guo, Hengzhi Fu (2010). Phase-field simulation of lamellar growth for a binary eutectic alloy. Transactions of Nonferrous Metals Society of China.DOI
592. 罗晓艳，刘贵仲，李伟，郭景杰（2010）. AlFeCoNiCrTiVx系高熵合金的组织结构及电化学性能. 《腐蚀与防护》.
593. 丁宏升，廖博超，陈瑞润，聂革，郭景杰，傅恒志（2010）. 冷坩埚定向凝固TiAl基合金热处理. 《材料热处理学报》.DOI
594. 丁宏升，郭景杰，陈瑞润，傅恒志（2010）. TiAl基合金冷坩埚定向凝固研究现状与发展趋势. 《中国材料进展》.
595. 李伟，刘贵仲，罗晓艳，郭景杰（2010）. AlxFeCoNiCrTi合金的抗氧化性能及其退火态的组织和硬度. 《机械工程材料》.
596. 苏彦庆，徐严谨，赵雷，郭景杰，傅恒志 (2010). Effect of electromagnetic force on melt induced by traveling magnetic field. Transactions of Nonferrous Metals Society of China.
597. 崔红保，王海燕，郭景杰（2010）. 偏晶合金定向凝固过程中第二相规则与非规则转变理论分析. 《热加工工艺》.
598. 张月红，苏彦庆，郭景杰，叶喜聪，傅恒志（2010）. 升温速率对TiH2热分解过程的影响. 《稀有金属材料与工程》.
599. 吴士平，张军，徐琴，郭景杰，施家飞，辛惠军（2010）. 钛合金铸件立式离心铸造凝固组织的数值模拟研究. 《中国体视学与图像分析》.
600. 刘爱辉，李邦盛，隋艳伟，郭景杰（2010）. 钛与氧化物陶瓷界面反应研究. 《铸造》.
601. 骆良顺，张宇民，张凤海，苏彦庆，李琨，陈大勇，郭景杰，傅恒志（2010）. 微量钴合金化的因瓦合金模具铸造成形试验研究. 《铸造》.
602. 刘爱辉，李邦盛，隋艳伟，郭景杰（2010）. 液态金属与陶瓷界面润湿性的研究进展. 《热加工工艺》.
603. 贾丽敏，徐达鸣，郭景杰，白世鸿，王红红（2010）. 离心铸造TC4合金冷速对其组织和力学性能的影响. 《中国有色金属学报》.
604. 王艳丽，郭景杰，傅恒志（2010）. 钛合金冷坩埚连续熔铸与定向凝固电磁场研究. 《航空材料学报》.
605. 刘江平，苏彦庆，郭景杰，骆良顺，傅恒志（2010）. γ-TiAl基合金薄板制备技术. 《特种铸造及有色合金》.
606. 刘爱辉，隋艳伟，李邦盛，郭景杰，傅恒志（2010）. 立式离心铸造液态金属中气泡的运动规律. 《特种铸造及有色合金》.
607. 吕国伟，苏彦庆，毕维生，郭景杰（2010）. 薄壁铝合金件行波磁场铸造的缺陷分析及控制. 《铸造技术》.
608. Guo Jingjie (2010). Oxidation Resistance of Al_xFeCoNiCrTi Alloys and Its Microstructure and Hardness in Annealing State. Materials for Mechanical Engineering.
609. Su Yanqing, Zhang Yuehong, Guo Jingjie, Ye Xicong, Liang Wang, Hengzhi Fu (2010). Research on TiH2 thermal decomposition for melt hydrogenation process. International Conference on Mechanic Automation and Control Engineering.DOI
610. Guo Jingjie (2010). Microstructure and Electrochemical Properties of AlFeCoNiCrTiV_x High-entropy Alloys. Corrosion & Protection.
611. Yanqing Su, Liang Wang, Liangshun Luo, Xinwang Liu, Jingjie Guo, Hengzhi Fu (2010). Investigation of melt hydrogenation on the microstructure and deformation behavior of Ti–6Al–4V alloy. International Journal of Hydrogen Energy.DOI
612. Xinwang Liu, Yanqing Su, Liangshun Luo, Jiangping Liu, Jingjie Guo, Hengzhi Fu (2010). Effect of hydrogen on hot deformation behaviors of TiAl alloys. International Journal of Hydrogen Energy.DOI
613. Dongmei Liu, Yanqing Su, Xinzhong Li, Liangshu Luo, Jingjie Guo, Hengzhi Fu (2010). Influence of thermal stabilization on the solute concentration of the melt in directional solidification. Journal of Crystal Growth.DOI
614. Dongmei Liu, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2010). Microstructure evolution in directionally solidified Ti–(50, 52)at%Al alloys. Intermetallics.DOI
615. Jianglei Fan, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2010). The microstructure parameters and microhardness of directionally solidified Ti–43Al–3Si alloy. Journal of Alloys and Compounds.DOI
616. Yanqing Su, Xinwang Liu, Liangshun Luo, Long Zhao, Jingjie Guo, Hengzhi Fu (2010). Deoxidation of Ti–Al intermetallics via hydrogen treatment. International Journal of Hydrogen Energy.DOI
617. Yanqing Su, Xinwang Liu, Liangshun Luo, Long Zhao, Jingjie Guo, Hengzhi Fu (2010). Hydrogen solubility in molten TiAl alloys. International Journal of Hydrogen Energy.DOI
618. Jianglei Fan, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu (2010). Dependency of microhardness on solidification processing parameters and microstructure characteristics in the directionally solidified Ti–46Al–0.5W–0.5Si alloy. Journal of Alloys and Compounds.DOI
619. Yanqing Su, Dongmei Liu, Xinzhong Li, Liangshu Luo, Jingjie Guo, Hengzhi Fu (2010). Preparation of the initial solid–liquid interface and melt in directional solidification of Al–18at%Ni peritectic alloy. Journal of Crystal Growth.DOI
620. Chengjun Zhang, Hengzhi Fu, Daming Xu, Jingjie Guo, Weisheng Bi, Yanqing Su (2009). Feasibility of integrated seed making and directional solidification of TiAl alloy using cold crucible. Transactions of Nonferrous Metals Society of China.DOI
621. Yanqing Su, Xinwang Liu, Long Zhao, Liang Wang, Jingjie Guo, Hengzhi Fu (2009). Effects of hydrogenation on ambient deformation behaviors of Ti-45Al alloy. Transactions of Nonferrous Metals Society of China.DOI
622. 隋艳伟，李邦盛，刘爱辉，熊艳才，郭景杰，傅恒志（2009）. 立式离心铸造液态金属中气泡的长大规律. 《特种铸造及有色合金》.
623. 崔红保，历长云，王狂飞，米国发，郭景杰，苏彦庆（2009）. Al-17.5In偏晶合金定向凝固规则第二相纤维的失稳判据. 《特种铸造及有色合金》.
624. 李伟，刘贵仲，郭景杰（2009）. AlFeCuCoNiCrTix高熵合金的组织结构及电化学性能. 《特种铸造及有色合金》.
625. 贾丽敏，徐达鸣，赵光伟，李丽丽，宋广，龚海军，郭景杰，傅恒志（2009）. 离心力对TC4钛合金铸件孔洞及线收缩率的影响. 《特种铸造及有色合金》.
626. 苏彦庆，张莉，郭景杰（2009）. Hf、B耦合作用对Ti-46Al合金凝固组织演化的影响. 《特种铸造及有色合金》.
627. 张正贺，苏彦庆，陈大洲，郭景杰，傅恒志（2009）. 合金元素挥发损失量计算动力学模型. 《铸造》.
628. 崔红保，历长云，王狂飞，郭景杰（2009）. 定向凝固Cu-Pb偏晶合金摩擦磨损性能的研究. 《热加工工艺》.
629. 李新中，孙涛，于彩霞，苏彦庆，曹勇智，郭景杰，傅恒志（2009）. 定向凝固Ti-(44%—54%)Al合金的凝固相选择. 《金属学报》.
630. 李新中，孙涛，彭鹏，苏彦庆，郭景杰，傅恒志（2009）. 定向凝固Ti-50Al合金组织演化及其片层取向控制. 《金属学报》.
631. 樊江磊，李新中，郭景杰，苏彦庆，傅恒志（2009）. 定向凝固Ti—43Al—3Si合金的组织演化规律 Ⅰ.初始过渡区组织演化规律. 《金属学报》.
632. 苏彦庆，叶喜葱，郭景杰，傅恒志（2009）. TiAl基合金金属型真空吸铸成形方法研究(英文). 《稀有金属材料与工程》.
633. 隋艳伟，李邦盛，刘爱辉，郭景杰，傅恒志（2009）. 离心铸造钛合金熔体补缩过程渗流流动物理模拟. 《稀有金属材料与工程》.
634. 薛冠霞，王同敏，苏彦庆，蔡少武，许菁菁，李军，郭景杰，李廷举（2009）. 感应凝壳熔炼过程热与流场耦合数值模拟研究(英文). 《稀有金属材料与工程》.
635. 历长云，崔红保，王狂飞，米国发，吴士平，郭景杰，傅恒志（2009）. 离心场对钛合金铸造性能的影响. 《稀有金属材料与工程》.
636. 隋艳伟，李邦盛，刘爱辉，郭景杰，傅恒志（2009）. 离心铸造钛合金熔体补缩过程渗流流量及相似准则. 《稀有金属材料与工程》.
637. 隋艳伟，李邦盛，刘爱辉，郭景杰，傅恒志（2009）. 离心铸造钛合金件的力学性能变化规律. 《稀有金属材料与工程》.
638. 丁宏升，张永，姜三勇，陈瑞润，郭景杰，徐达鸣，傅恒志（2009）. 脉冲电流影响合金熔体特征及其凝固组织的研究进展. 《稀有金属材料与工程》.
639. 李新中，樊江磊，郭景杰，苏彦庆，傅恒志（2009）. 定向凝固Ti—43Al—3Si合金的组织演化规律 Ⅱ.稳态生长区组织演化规律. 《金属学报》.
640. 陈瑞润，丁宏升，郭景杰，梁富振，张子钦，毕维生，刘林，傅恒志（2009）. 工艺参数影响冷坩埚熔铸Ti6Al4V温度场计算. 《材料科学与工艺》.
641. 关兴举，杨慧敏，张莉，田金华，苏彦庆，郭景杰，傅恒志（2009）. W对γ-TiAl基合金单向凝固组织的影响. 《特种铸造及有色合金》.
642. 丁宏升，聂革，陈瑞润，毕维生，郭景杰，傅恒志（2009）. TiAl基合金方坯冷坩埚电磁约束铸造工艺研究. 《特种铸造及有色合金》.
643. 郭景杰，苏仕方（2009）. 2009世界铸造技术论坛简介. 《2009中国铸造活动周论文集》.
644. 隋艳伟，刘爱辉，李邦盛，郭景杰，傅恒志（2009）. 钛合金离心铸造缩孔缺陷物理模拟研究. 《郑州大学学报(工学版)》.
645. 吕国伟，苏彦庆，毕维生，郭景杰（2009）. 铸造用行波磁场分布规律的研究. 《铸造技术》.
646. 崔红保，历长云，王狂飞，米国发，郭景杰，苏彦庆，傅恒志（2009）. 化学成分对定向凝固Al-In偏晶合金显微组织的影响. 《铸造技术》.
647. Yao-Wen Sui, B. Li, A.-H. Liu, Jingjie Guo, Hong-Gang Fu (2009). Evolution of solidification microstructure of centrifugal cast Ti–6Al–4V alloy.DOI
648. Guo Jingjie (2009). Study on Friction and Wear Performance of Directionally Solidified Cu-Pb Monotectic Alloy. Rejiagong gongyi.
649. Guo Jingjie (2009). Study on Behaviors of Annealed Microstructure and Hardness Development in AlFeCuCoNiCrTi_x High-entropy Alloys. Cailiao daobao.
650. Guo Jingjie (2009). Study on the Distribution of Travelling Magnetic Field for Casting Processing. Rejiagong gongyi.
651. Yanqing Su, Liang Wang, Liangshun Luo, Xiaohong Jiang, Jingjie Guo, Hengzhi Fu (2009). Deoxidation of Titanium alloy using hydrogen. International Journal of Hydrogen Energy.DOI
652. Su Yanqing, Ye Xicong, Guo Jingjie, Hengzhi Fu (2009). Study on Vacuum Suction Casting for TiAl-Based Alloys. 《稀有金属材料与工程》.DOI
653. Xue Guanxia, Wang Tongmin, Su Yanqing, Cai Shaowu, Jingjing Xu, Jun Li, Guo Jingjie, Guobin Li (2009). Numerical Simulation of Thermal and Flow Fields in Induction Skull Melting Process. 《稀有金属材料与工程》.DOI
654. 王狂飞，郭景杰，历长云，熊艳才，傅恒志（2008）. 温度梯度对Ti-45Al合金定向凝固组织演化影响的数值模拟. 《材料工程》.
655. 王狂飞，郭景杰，米国发，李邦盛，傅恒志（2008）. Ti-45at.%Al合金定向凝固过程中显微组织演化的计算机模拟. 《物理学报》.
656. Yan-wei SUI, Bangsheng Li, Aihui Liu, Hai Nan, Jingjie Guo, Hengzhi Fu (2008). Microstructures and hardness of Ti-6Al-4V alloy staging castings under centrifugal field. Transactions of Nonferrous Metals Society of China.DOI
657. Bangsheng Li, Aihui Liu, Hai Nan, Weisheng Bi, Jingjie Guo, Hengzhi Fu (2008). Wettability of TiAl alloy melt on ceramic moulds in electromagnetic field. Transactions of Nonferrous Metals Society of China.DOI
658. 崔红保，历长云，王狂飞，米国发，郭景杰，苏彦庆，傅恒志（2008）. 凝固速度对高温度梯度定向凝固Al-17.5In合金组织的影响. 《特种铸造及有色合金》.
659. 蒋光锐，刘源，李言祥，苏彦庆，郭景杰（2008）. 铝合金熔体中氢溶解度的计算模型. 《金属学报》.
660. 杨慧敏，苏彦庆，郭景杰，骆良顺，李新中，傅恒志（2008）. B元素对Ti-46Al和Ti-46Al-5Nb合金柱状晶组织的影响. 《金属学报》.
661. 陈瑞润，丁宏升，郭景杰，毕维生，傅恒志（2008）. 热处理对Ti46Al0.5W0.5Si合金组织和性能的影响. 《特种铸造及有色合金》.
662. 张成军，傅恒志，徐达鸣，郭景杰，苏彦庆（2008）. 双相γ+α2钛合金片层承载力的数学模型及预测. 《材料科学与工艺》.
663. 隋艳伟，李邦盛，刘爱辉，熊艳才，郭景杰，傅恒志（2008）. 离心铸造液态金属充型流动过程中气泡的形核规律. 《材料研究学报》.
664. 刘爱辉，李邦盛，隋艳伟，于杰，郭景杰，傅恒志（2008）. Ti/ZrO2和TiAl/ZrO2反应的差热分析. 《中国有色金属学报》.
665. 白云峰，周月明，严彪，张永杰，徐达鸣，郭景杰，傅恒志（2008）. 电磁场在材料凝固加工领域的应用. 《铸造》.
666. 李新中，郭景杰，苏彦庆，吴士平，傅恒志（2008）. 过冷定向凝固Ti-44Al合金微观组织的相场法模拟. 《特种铸造及有色合金》.
667. 吕国伟，于波，苏彦庆，毕维生，郭景杰（2008）. 铸造用行波磁场ANSYS有限元分析. 《铸造设备与工艺》.
668. 吴士平，张军，徐琴，郭景杰，傅恒志（2008）. 离心铸造充型及凝固过程数值模拟. 《铸造设备与工艺》.
669. 隋艳伟，李邦盛，刘爱辉，熊艳才，郭景杰，傅恒志（2008）. 离心铸造铝铜合金缩孔缺陷研究. 《铸造》.
670. 隋艳伟，李邦盛，刘爱辉，郭景杰，傅恒志（2008）. 离心铸造铝铜合金显微组织梯度分布规律. 《铸造》.
671. 尚俊玲，李邦盛，任明星，杨闯，郭景杰（2008）. 原位TiB/Ti复合材料的磨损性能及磨损机制. 《铸造》.
672. 隋艳伟，李邦盛，刘爱辉，郭景杰，傅恒志（2008）. 离心铸造液态金属中夹杂运动规律研究. 《2008中国铸造活动周论文集》.
673. 傅恒志，丁宏升，陈瑞润，毕维生，王艳丽，白云峰，徐达鸣，苏彦庆，郭景杰（2008）. 钛铝合金电磁冷坩埚定向凝固技术的研究. 《稀有金属材料与工程》.
674. 孙国雄，郭景杰，苏仕方（2008）. 世界铸造技术最新发展——第68届世界铸造会议技术报告概述. 《铸造》.
675. 王艳丽，郭景杰，傅恒志（2008）. 钛合金冷坩埚定向凝固过程温度场数值模拟. 《哈尔滨工业大学学报》.
676. 刘爱辉，李邦盛，南海，隋艳伟，郭景杰，傅恒志（2008）. 钛铝基合金与4种陶瓷界面反应的研究(英文). 《稀有金属材料与工程》.
677. 李邦盛，刘爱辉，毕维生，隋艳伟，郭景杰，傅恒志（2008）. 电磁场对TiAl合金试样表面粗糙度的影响. 《特种铸造及有色合金》.
678. 历长云，崔红保，吴士平，郭景杰，王狂飞，米国发，王惠玲（2008）. 立式离心场下钛合金铸件缩孔缩松数值模拟. 《特种铸造及有色合金》.
679. 崔红保，历长云，王狂飞，米国发，郭景杰，苏彦庆（2008）. 相场法模拟Marangoni对流对Cu-Pb过偏晶合金组织演化的影响. 《铸造》.
680. 薛冠霞，王同敏，苏彦庆，宋涛，郭景杰，李廷举，王红霞（2008）. 感应凝壳熔炼悬浮驼峰数值模拟研究. 《特种铸造及有色合金》.DOI
681. 陈瑞润，丁宏升，郭景杰，毕维生，苏彦庆，刘林，傅恒志（2008）. 冷坩埚连续熔凝法制备Ti47Al合金扁锭. 《特种铸造及有色合金》.DOI
682. 郭景杰，李新中，苏仕方，刘秀玲，张正贺（2008）. 中国铸造行业发展现状及未来. 《特种铸造及有色合金》.
683. Kuang-fei Wang, Bangsheng Li, Guofa Mi, Jingjie Guo, Hengzhi Fu (2008). Modeling of Cell/Dendrite Transition During Directional Solidification of Ti-Al Alloy Using Cellular Automaton Method. Journal of Iron and Steel Research International.DOI
684. Aihui Liu, Bangsheng Li, Nan Hai, Sui Yanwei, Guo Jingjie, Hengzhi Fu (2008). Study of Interfacial Reaction between TiAl Alloys and Four Ceramic Molds. 《稀有金属材料与工程》.DOI
685. 尚俊玲，李邦盛，任明星，杨闯，郭景杰（2007）. 原位TiBw/Ti复合材料的流动性及其充型能力. 《特种铸造及有色合金》.
686. 崔红保，郭景杰，苏彦庆，吴士平，李新中，傅恒志（2007）. Cu-Pb过偏晶合金颗粒生长和Ostwald熟化的相场法模拟. 《金属学报》.
687. 尚俊玲，李邦盛，任明星，杨闯，郭景杰（2007）. 原位TiB/Ti复合材料熔体停止流动机理研究. 《铸造》.
688. 陈瑞润，丁宏升，郭景杰，梁富振，张子钦，毕维生，刘林，傅恒志（2007）. 冷坩埚连续熔铸与定向凝固Ti6Al4V合金的温度场计算. 《稀有金属材料与工程》.
689. 丁宏升，陈瑞润，毕维生，郭景杰，刘林，傅恒志（2007）. 工艺参数对冷坩埚定向凝固钛合金宏观组织的影响. 《稀有金属材料与工程》.
690. 刘爱辉，李邦盛，南海，隋艳伟，于杰，郭景杰，傅恒志（2007）. TiAl基合金熔体与氧化物铸型界面的相互作用. 《稀有金属材料与工程》.
691. 王狂飞，米国发，历长云，郭景杰，傅恒志（2007）. Ti-Al合金定向凝固柱状/等轴晶转变的数值模拟. 《特种铸造及有色合金》.
692. 王艳丽，丁宏升，毕维生，郭景杰，傅恒志（2007）. TiAl基合金感应熔炼自由液面的变化规律研究. 《材料科学与工艺》.
693. 丁宏升，郭景杰，苏彦庆，贾均，傅恒志（2007）. 我国铸造有色合金及其特种铸造技术发展现状. 《铸造》.
694. 王狂飞，李邦盛，米国发，郭景杰，傅恒志（2007）. Ti44Al合金胞/枝晶转变及其生长过程的数值模拟. 《金属学报》.
695. 蒋光锐，刘源，李言祥，苏彦庆，郭景杰（2007）. 多元合金熔体组元活度系数计算方法的改进. 《金属学报》.
696. 王狂飞，郭景杰，历长云，米国发，傅恒志（2007）. 抽拉速度对Ti-45Al合金定向凝固组织演化影响的数值模拟. 《铸造》.
697. 吕国伟，苏彦庆，毕维生，郭景杰（2007）. 行波磁场发生器上磁场分布及其熔体充型特征. 《特种铸造及有色合金》.
698. 陈瑞润，郭景杰，丁宏升，苏彦庆，毕维生，刘林，贾均，傅恒志（2007）. 冷坩埚熔铸技术的研究及开发现状. 《铸造》.
699. 傅恒志，骆良顺，苏彦庆，郭景杰，李双明，刘林（2007）. 包晶合金定向凝固中的共生生长. 《中国有色金属学报》.
700. Yunfeng Bai, Daming Xu, Guo Jingjie, Hengzhi Fu (2007). Computer Simulation of Solidification Transport Behaviours in Blade-Like Castings under Transverse Static Magnetic Fields up to 25T. steel research international.DOI
701. Guo Jingjie (2007). Simulation of Electromagnetic Fields Distribution of Travelling Magnetic Generator. Journal of Jiamusi University.
702. Liangshun Luo, Yanqing Su, Jingjie Guo, Xinzhong Li, Hengzhi Fu (2007). A simple model for lamellar peritectic coupled growth with peritectic reaction. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
703. Hongbao Cui, Jingjie Guo, Yanqing Su, Hongsheng Ding, Weisheng Bi, Xinzhong Li, Hengzhi Fu (2007). Effect of Cr addition on microstructure and wear resistance of hypomonotectic Cu–Pb alloy. Materials Science and Engineering A.DOI
704. 李新中，苏彦庆，郭景杰，吴士平，傅恒志（2006）. 定向凝固包晶相变微观组织演化的相场方法研究 Ⅰ．三相交节点的延伸. 《金属学报》.
705. 王艳丽，丁宏升，毕维生，郭景杰，傅恒志（2006）. 钛合金定向凝固用矩形电磁冷坩埚内的磁场分布特性. 《稀有金属材料与工程》.
706. 王狂飞，李邦盛，米国发，郭景杰，傅恒志（2006）. TiAl合金定向凝固胞晶／枝晶转变过程的数值模拟. 《2006年材料科学与工程新进展——“2006北京国际材料周”论文集》.
707. 陈瑞润，丁宏升，毕维生，郭景杰，贾均，傅恒志（2006）. 钛合金冷坩埚电磁约束铸造工艺研究. 《中国机械工程学会第十一届全国铸造年会》.
708. 刘东戎，吴士平，郭景杰，苏彦庆，傅恒志（2006）. 考虑包晶反应的Ti-(45—48)Al合金锭凝固组织模拟. 《金属学报》.
709. 历长云，吴士平，郭景杰，傅恒志，张颖，薛伟（2006）. 立式离心铸造熔体充填量的研究与模拟. 《特种铸造及有色合金》.
710. 苏彦庆，骆良顺，毕维生，郭景杰，傅恒志（2006）. 共晶和包晶合金定向凝固过程中共生生长的形态稳定性. 《中国有色金属学报》.
711. 苏彦庆，李新中，郭景杰，吴士平，傅恒志（2006）. 定向凝固包晶相变微观组织演化的相场方法研究 Ⅱ．形核控制的微观组织模拟. 《金属学报》.
712. 陈瑞润，丁宏升，毕维生，郭景杰，刘林，傅恒志（2006）. 电磁约束成形用冷坩埚内磁场分布规律. 《特种铸造及有色合金》.
713. 苏彦庆，郭景哲，刘畅，郭景杰，贾均，傅恒志（2006）. 定向凝固技术与理论研究的进展. 《特种铸造及有色合金》.DOI
714. 杨慧敏，苏彦庆，骆良顺，丁宏升，郭景杰，贾均，傅恒志（2006）. 含Nb的TiAl合金PAM过程质量变化. 《特种铸造及有色合金》.DOI
715. Changyun Li, Shiping Wu, Guo Jingjie, Su Yanqing, Weisheng Bi, Hengzhi Fu (2006). Model experiment of mold filling process in vertical centrifugal casting. Journal of Materials Processing Technology.DOI
716. Yanqing Su, Liangshun Luo, Xinzhong Li, Jingjie Guo, Huimin Yang, Hengzhi Fu (2006). Well-aligned in situ composites in directionally solidified Fe–Ni peritectic system. Applied Physics Letters.DOI
717. Shiping Wu, Changyun Li, Jingjie Guo, Yanqing Su, Xiu-qiao LEI, Hengzhi Fu (2006). Numerical simulation and experimental investigation of two filling methods in vertical centrifugal casting. Transactions of Nonferrous Metals Society of China.DOI
718. Hongbao Cui, Jingjie Guo, Yanqing Su, Hongsheng Ding, Shiping Wu, Weisheng Bi, Daming Xu, Hengzhi Fu (2006). Microstructure evolution of Cu-Pb monotectic alloys during directional solidification. Transactions of Nonferrous Metals Society of China.DOI
719. Tongmin Wang, Yanqing Su, Jingjie Guo, I. Ohnaka, Hideyuki Yasuda (2006). Structure simulation in unidirectionally solidified turbine blade by dendrite envelope tracking model (II): model validation and defects prediction. Transactions of Nonferrous Metals Society of China.DOI
720. Tongmin Wang, Itsuo Ohnaka, YASUDA Hideyuki, Yanqing Su, Jingjie Guo (2006). Structure defect prediction of single crystal turbine blade by dendrite envelope tracking model. Transactions of Nonferrous Metals Society of China.DOI
721. Yunfeng Bai, Daming Xu, Weisheng Bi, Jingjie Guo, Hengzhi Fu (2006). Numerical Simulation for the Transport Phenomena in Melting Processes of Blade-Like Castings Using a Continuum Model. International Multi-Symposiums on Computer and Computational Sciences.DOI
722. Tongmin Wang, I. Ohnaka, Hideyuki Yasuda, Yanqing Su, Jingjie Guo (2006). Structure simulation in unidirectionally solidified turbine blade by dendrite envelope tracking model(I): numerical modeling. Transactions of Nonferrous Metals Society of China.DOI
723. Liangshun Luo, Yanqing Su, Jingjie Guo, Hengzhi Fu (2006). Formation of titanium hydride in Ti–6Al–4V alloy. Journal of Alloys and Compounds.DOI
724. 李新中，郭景杰，苏彦庆，吴士平，傅恒志（2005）. 定向凝固包晶合金带状组织的形成机制及相选择 Ⅰ.带状组织的形成机制. 《金属学报》.
725. 刘畅，苏彦庆，李新中，郭景杰，贾均，傅恒志（2005）. Ti-(44-50)Al合金定向包晶凝固过程中的组织演化. 《金属学报》.
726. 王艳丽，丁宏升，毕维生，郭景杰，傅恒志（2005）. 钛合金扁形锭冷坩埚电磁约束成形工艺参数研究. 《稀有金属材料与工程》.
727. 苏彦庆，刘畅，毕维生，丁宏升，李邦盛，关兴举，郭景杰，贾均，傅恒志（2005）. Ti-45Al合金的定向凝固组织. 《稀有金属材料与工程》.
728. 陈瑞润，丁宏升，毕维生，郭景杰，贾均，傅恒志（2005）. 电磁冷坩埚技术及其应用. 《稀有金属材料与工程》.
729. 苏彦庆，骆良顺，郭景杰，贾均，傅恒志（2005）. Ti6Al4V合金渗氢氢化组织及氢脆机制的研究. 《稀有金属材料与工程》.
730. 陈瑞润，丁宏升，毕维生，郭景杰，傅恒志（2005）. 工艺参数对冷坩埚连续铸造Ti6Al4V表面的影响. 《材料科学与工艺》.
731. 苏彦庆，骆良顺，毕维升，丁宏升，郭景杰，贾均，傅恒志（2005）. 置氢对Ti6Al4V合金室温组织的影响. 《材料科学与工艺》.
732. 傅恒志，李新中，刘畅，苏彦庆，李双明，郭景杰（2005）. Ti-Al包晶合金定向凝固及组织选择. 《中国有色金属学报》.
733. 王狂飞，李邦盛，侯守明，李殿中，郭景杰，傅恒志（2005）. 钛铝合金精铸过程温度场与表面晶粒的关系研究. 《铸造》.
734. 王狂飞，李邦盛，李殿中，郭景杰，傅恒志（2005）. 工艺参数对铸件表面显微组织影响的实验研究. 《铸造》.
735. 苏彦庆，毕维生，黄俊勇，张铁军，关兴举，郭景杰，丁宏升，吴士平，贾均，傅恒志（2005）. 电磁铸造移动磁场发生器磁场分布规律及其作用分析. 《特种铸造及有色合金》.
736. 李新中，郭景杰，苏彦庆，刘畅，吴士平，傅恒志（2005）. 金属熔体凝固微观组织模拟的相场方法研究. 《特种铸造及有色合金》.
737. 李邦盛，王狂飞，吴士平，米国发，毕维升，郭景杰，傅恒志（2005）. TiAl合金熔模精铸件缩孔形成的数值模拟及预测. 《特种铸造及有色合金》.
738. 王艳丽，丁宏升，郭景杰，毕维生，傅恒志（2005）. 矩形电磁冷坩埚连续铸造钛合金的成形性研究. 《特种铸造及有色合金》.
739. 郭景杰（2005）. 锐意进取 不断创新——贺《特种铸造及有色合金》杂志创刊25周年. 《特种铸造及有色合金》.
740. Liu Dong-rong, Shiping Wu, Guo Jingjie, Su Yanqing, Hengzhi Fu (2005). Modelling of solidification of Ti-45 at%Al alloy ingot by the stochastic model. Journal of Materials Science.DOI
741. Guo Jingjie, Shuangming Li, Su Yanqing, WU Shi-ping, Hengzhi Fu (2005). FORMATION MECHANISM OF BAND STRUCTURE AND PHASE SELECTION DURING DIRECTIONAL SOLIDIFICATION OF PERITECTIC ALLOYS II.Phase Selection. Acta Metallurgica Sinica.
742. Daming Xu, Yunfeng Bai, Hengzhi Fu, Jingjie Guo (2005). Heat, mass and momentum transport behaviors in directionally solidifying blade-like castings in different electromagnetic fields described using a continuum model. International Journal of Heat and Mass Transfer.DOI
743. Yanqing Su, Chang Liu, Xinzhong Li, Jingjie Guo, Bangsheng Li, Jun Jia, Hengzhi Fu (2005). Microstructure selection during the directionally peritectic solidification of Ti–Al binary system. Intermetallics.DOI
744. 崔红保，郭景杰，毕维生，苏彦庆，吴士平，傅恒志（2004）. 高温度梯度下Al-In偏晶合金定向凝固组织的演化规律. 《金属学报》.
745. 李新中，郭景杰，苏彦庆，贾均，傅恒志（2004）. 金属过冷熔体等轴枝晶生长的相场方法研究. 《金属学报》.
746. 王狂飞，李邦盛，吴士平，张赫，郭景杰（2004）. TiAl合金精密铸件缩孔的定量预测. 《热加工工艺》.
747. 赵成志，郭景杰，苏彦庆，吴士平，贾均，傅恒志（2004）. Cu23%In合金凝固组织随冷却速度变化规律. 《铸造》.
748. 赵成志，郭景杰，苏彦庆，吴士平，贾均（2004）. In含量对Cu-Cr-In三元合金组织的影响. 《特种铸造及有色合金》.DOI
749. 吴士平，郭景杰，贾均（2004）. TiAl基合金排气阀立式离心铸造充型及凝固过程数值模拟. 《金属学报》.
750. 张铁军，丁宏升，苏彦庆，毕维生，吴世平，郭景杰，贾均，傅恒志（2004）. 移动磁场电磁力对铸件表面粗糙度的影响. 《特种铸造及有色合金》.
751. 郭景杰，崔红保，苏彦庆，毕维生，贾均，傅恒志（2004）. 难混溶合金及其制备技术研究进展. 《特种铸造及有色合金》.
752. Jingjie Guo, C.-Z. Zhao, Shen Wu, Y.-Q. Su, J. Jia (2004). Phase and microstructure evolution in Cu-In-Cr alloys.DOI
753. Yunfeng Bai, Daming Xu, LiHe Mao, Guo Jingjie, Hengzhi Fu (2004). FEM/FDM-Joint Simulation for Transport Phenomena in Directionally Solidifying Shaped TiAl Casting under Electromagnetic Field. ISIJ International.DOI
754. Hongsheng Ding, Ruirun Chen, Jingjie Guo, Weisheng Bi, Daming Xu, Hengzhi Fu (2004). Directional solidification of titanium alloys by electromagnetic confinement in cold crucible. Materials Letters.DOI
755. Jingjie Guo, Xinzhong Li, Yanqing Su, Shiping Wu, Bangsheng Li, Hengzhi Fu (2004). Phase-field simulation of structure evolution at high growth velocities during directional solidification of Ti55Al45 alloy. Intermetallics.DOI
756. Daming Xu, Yunfeng Bai, Jingjie Guo, Hengzhi Fu (2004). Numerical simulation of heat, mass and momentum transport behaviours in directionally solidifying alloy castings under electromagnetic fields using an extended Direct‐SIMPLE scheme. International Journal for Numerical Methods in Fluids.DOI
757. 李双明，张丰收，郝启堂，傅恒志，贾均，郭景杰（2003）. 高温合金叶片类铸件电磁软接触成形过程研究. 《稀有金属材料与工程》.
758. 刘源，李言祥，郭景杰，贾均（2003）. 难混溶合金凝固过程中宏观偏析形成的数值模拟. 《金属学报》.
759. 刘贵仲，苏彦庆，郭景杰，丁宏升，贾均，傅恒志（2003）. Ti-13Al-29Nb-2.5Mo合金ISM熔炼过程中多组元挥发损失. 《稀有金属材料与工程》.
760. 白云峰，徐达鸣，郭景杰，傅恒志（2003）. 采用温度回升法对任意结晶区间的铸件凝固结晶潜热的数值计算. 《金属学报》.
761. 苏彦庆，郭景杰，贾均，傅恒志（2003）. ISM方法熔炼TiAl合金过程中热爆成因分析. 《材料科学与工艺》.
762. 张铁军，苏彦庆，丁宏升，郭景杰，贾均，傅恒志（2003）. 移动磁场铸造用感应器的磁感应强度及分布. 《特种铸造及有色合金》.DOI
763. 徐达鸣，傅恒志，郭景杰，贾钧，李庆春（2003）. 一种合金枝晶凝固微观溶质再分布统一模型. 《哈尔滨工业大学学报》.
764. 尚俊玲，李邦盛，郭景杰（2003）. Al对原位自生Ti基复合材料中TiB晶须增强相生成的作用. 《稀有金属材料与工程》.
765. 吴士平，于彦东，王丽萍，郭景杰（2003）. 提高充型过程数值模拟运算速度的动态超松弛迭代算法. 《中国有色金属学报》.
766. 傅恒志，郭景杰，苏彦庆，刘林，徐达鸣，李金山（2003）. TiAl金属间化合物的定向凝固和晶向控制. 《中国有色金属学报》.
767. 郭景杰，傅恒志 魏炳波 郭景杰（2003）. 凝固科学技术与材料. 《中国工程科学》, Vol. 5, No. 8.下载原文
768. WU Shi-ping, Guo Jingjie, Su Yanqing, Zhao Chengzhi, Jun Jia (2003). Numerical simulation of off-centred porosity formation of TiAl-based alloy exhaust valve during vertical centrifugal casting. Modelling and Simulation in Materials Science and Engineering.DOI
769. Guizhong Liu, Jingjie Guo, Jingjie Guo, Yanqing Su, Jingzhe Guo, Jingzhe Guo, Jun Jia, Hengzhi Fu (2003). Evaporation loss of components during induction skull melting of Ti—13Al—29Nb—2·5Mo. International Journal of Cast Metals Research.DOI
770. Shiping Wu, Jingjie Guo, Yangqing Su, Jun Jiaf, Shigetomo NUNOMURA (2003). Numerical simulation of mold filling during centrifugal casting of TiAl alloy exhaust valve. International Journal of Cast Metals Research.DOI
771. 苏彦庆，崔红保，郭景杰，刘源，贾均（2002）. Al-In难混溶合金的液相分离过程及显微组织数值模拟. 《铸造》.
772. 白云峰，徐达鸣，郭景杰，傅恒志，苏彦庆，贾钧（2002）. 三维叶片铸件定向凝固传输过程数值模拟及可视化. 《2002年材料科学与工程新进展（下）——2002年中国材料研讨会论文集》.
773. 苏彦庆，刘畅，毕维升，郭景杰，贾均（2002）. TiAl基合金杆形件铸造缺陷与铸造方法的关系. 《特种铸造及有色合金》.
774. 苏彦庆，郭景杰，贾均，丁宏升，崔红保，柳松青（2002）. TiAl基合金涡轮熔模型壳离心精密铸造. 《稀有金属材料与工程》.
775. 祝汉良，郭景杰，贾均（2002）. 硅对压铸模与铝合金相互作用的影响. 《特种铸造及有色合金》.DOI
776. 傅恒志，苏彦庆，郭景杰，徐达鸣（2002）. 高温金属间化合物的定向凝固特性. 《金属学报》.
777. 徐达鸣，李鑫，安阁英，郭景杰，贾均（2002）. 钛合金离心精密铸造充型过程计算机模拟. 《铸造》.
778. Jingjie Guo, Jun Jia, Hengzhi Fu, Guizhong Liu, Yanqing Su, Hongsheng Ding (2002). The critical pressure and impeding pressure of Al evaporation during induction skull melting processing of TiAl. Metallurgical and Materials Transactions A.DOI
779. Hanliang Zhu, Jingjie Guo, Jun Jia (2002). Experimental study and theoretical analysis on die soldering in aluminum die casting. Journal of Materials Processing Technology.DOI
780. Su Yanqing, Guo Jingjie, Jun Jia, Liu Guizhong, Liu Yuan (2002). Composition control of a TiAl melt during the induction skull melting (ISM) process. Journal of Alloys and Compounds.DOI
781. Daming Xu, Jingjie Guo, Hengzhi Fu, Weisheng Bi (2002). Influences of dendrite morphologies and solid-back diffusion on macrosegregation in directionally solidified blade-like casting. Materials Science and Engineering A.DOI
782. 刘源，郭景杰，贾均，苏彦庆，丁宏升（2001）. 用铜模快冷法制备均质Al-In过偏晶合金. 《金属学报》.
783. 李双明，郝启堂，李金山，寇宏超，傅恒志，贾均，郭景杰（2001）. 液态金属双频电磁约束成形过程研究. 《稀有金属材料与工程》.
784. 郭景杰，刘源，贾均，苏彦庆，丁宏升（2001）. 过偏晶合金快速凝固过程中第二相液滴在液-液相变区内的粗化. 《金属学报》.
785. 吴士平，郭景杰，苏彦庆，贾均（2001）. TiAl基合金排气阀离心铸造充型过程数值模拟的试验验证. 《铸造》.
786. 盛文斌，李东，杨锐，郭景杰，刘羽寅，苏彦庆，贾均（2001）. 金属型离心铸造Ti-48%Al-2%Cr-2%Nb合金汽车排气阀的研制. 《铸造》.
787. Hanliang Zhu, Jingjie Guo, Jun Jia (2001). Correlation of the Aging Characteristics and Deformation Behavior of A357 Alloy. Journal of Materials Engineering and Performance.DOI
788. Guo Jingjie, Liu Yuan, Jun Jia, Su Yanqing, Hongsheng Ding, Zhao Jiuzhou, Xue Xiang (2001). Coarsening mode and microstructure evolution of Al–In hypermonotectic alloy during rapidly cooling process. Scripta Materialia.DOI
789. Yanqing Su, Yuan Liu, Guizhong Liu, Guo Jingjie, Daming Xu, Jun Jia (2001). Molding of temperature field for the induction skull melting process of Ti-47Ni-9Nb. Metallurgical and Materials Transactions A.DOI
790. 盛文斌，郭景杰，苏彦庆，丁宏升，贾均（2000）. TiAl基合金排气阀金属型离心铸造过程内部缺陷分析. 《航空材料学报》.
791. 丁宏升，贾均，傅恒志，郭景杰，李金山，刘源（2000）. 热处理对铸造Ti15-3合金显微组织和力学性能的影响. 《材料科学与工艺》.
792. 盛文斌，丁宏升，郭景杰，苏彦庆，贾均（2000）. TiV15Cr3Sn3Al3合金熔体离心力场下充型流态分析. 《铸造》.
793. 盛文斌，郭景杰，苏彦庆，丁宏升，贾均（2000）. TiAlNb合金离心铸造过程中溢出临界值分析. 《特种铸造及有色合金》.DOI
794. 刘咏，黄伯云，贺跃辉，欧阳鸿武，郭景杰（2000）. 粉末冶金TiAl基合金排气阀的制备及性能. 《中国有色金属学报》.
795. 祝汉良，郭景杰，贾均，李沛勇（2000）. Ti细化A357铝合金中的析出相. 《金属学报》.
796. 刘源，郭景杰，贾均，苏彦庆，丁宏升（2000）. 快速凝固Al-In偏晶合金的显微结构. 《金属学报》.
797. 刘源，郭景杰，贾均（2000）. 偏晶合金液液相分离机制和均质偏晶合金的制备方法. 《铸造》.
798. 郭景杰，盛文斌，苏彦庆，丁宏升，贾均（2000）. Ti-6-4合金熔体离心铸造过程中流态分析. 《特种铸造及有色合金》.
799. Jingjie Guo, Jun Jia, Yuan Liu, Guizhong Liu, Yanqing Su, Hongsheng Ding (2000). Evaporation behavior of aluminum during the cold crucible induction skull melting of titanium aluminum alloys. Metallurgical and Materials Transactions B.DOI
800. 丁宏升，郭景杰，贾均（1999）. 磁流铸造条件下A357合金充型能力的试验研究. 《特种铸造及有色合金》.DOI
801. 苏彦庆，任志江，郭景杰，贾均（1999）. Ti-6Al-4V合金真空熔炼过程中氧元素的溶解. 《特种铸造及有色合金》.DOI
802. 苏彦庆，郭景杰，贾均，丁宏升（1999）. Ti-48Al-2Cr-2Nb合金ISM熔炼过程研究. 《特种铸造及有色合金》.DOI
803. 郭景杰，刘源，贾均，苏彦庆，丁宏升（1999）. Ti-6Al-4V合金ISM熔炼过程中Al元素的挥发损失行为. 《铸造》.
804. 赵忠民，贾均，郭景杰，赵九洲（1999）. Zn-Pb合金液相分离机制的研究. 《铸造》.
805. 刘源，郭景杰，苏彦庆，丁宏升，贾均（1999）. 热处理对铸造Ti-15-3合金显微组织及力学性能的影响. 《铸造》.
806. 丁宏升，郭景杰，贾均（1999）. 特种铸造及有色合金技术现状与发展趋势. 《铸造》.
807. 盛文斌，郭景杰，苏彦庆，丁宏升，贾均（1999）. TiAl基合金离心铸造过程中的层流临界值分析. 《航空材料学报》.
808. 贾均，盛文斌，郭景杰，苏彦庆，丁宏升（1999）. Ti-15-3合金熔体离心浇注过程中流速分析. 《特种铸造及有色合金》.
809. 苏彦庆，郭景杰，刘源，丁宏升，贾均（1999）. Ti-15-3合金真空感应凝壳熔炼(ISM)过程研究. 《特种铸造及有色合金》.
810. 贾均，陈利军，丁宏升，郭景杰（1999）. 大型薄壁铝合金铸件磁流铸造技术. 《特种铸造及有色合金》.
811. 郭景杰，盛文斌，贾均（1999）. 钛合金金属型铸造工艺研究现状. 《特种铸造及有色合金》.
812. 祝汉良，郭景杰，贾均（1999）. 压铸模与铝铸件间焊合的研究现状. 《特种铸造及有色合金》.
813. 丁宏升，郭景杰，贾均（1999）. Ti-15-3合金与铸型材料界面反应的研究. 《特种铸造及有色合金》.
814. 郭景杰，刘源，苏彦庆，丁宏升，贾均（1999）. Ti-24Al-11Nb合金感应凝壳熔炼(ISM)过程中Al元素的挥发损失行为. 《金属学报》.
815. 盛文斌，郭景杰，苏彦庆，丁宏升，贾均（1999）. Ti-15-3合金离心铸造过程中溢出临界值分析. 《稀有金属材料与工程》.
816. 郭景杰，刘源，苏彦庆，贾均（1999）. 两种Ti-Al金属间化合物基合金ISM熔炼过程中Al元素挥发控制方式的判断. 《稀有金属材料与工程》.
817. 苏彦庆，郭景杰，贾均（1999）. 铸型材料对钛铝金属间化合物的污染研究. 《航空材料学报》.
818. 祝汉良，郭景杰，贾均（1999）. 压铸模与铝铸件焊合区的特征及形成机理. 《特种铸造及有色合金》.DOI
819. 苏彦庆，任志江，郭景杰，贾均，徐汇洋，崔世恭（1999）. Ti6Al4V合金ISM熔炼工艺参数优化. 《材料科学与工艺》.
820. 郭景杰，任志江，苏彦庆，丁宏升，崔世恭，贾均（1999）. Ti6Al4V合金SIM熔炼过程中氧元素的溶解与控制. 《材料科学与工艺》.
821. 程荆卫，郭景杰，苏彦庆，刘贵仲，刘源，丁宏升，贾均（1999）. Ti-13Al-29Nb-2.5MoISM过程中Al元素的挥发损失速率. 《材料科学与工艺》.
822. 丁宏升，郭景杰，贾均，苏彦庆（1999）. 真空感应凝壳熔炼TC4合金的显微组织和力学性能. 《材料科学与工艺》.
823. 徐达鸣，王军新，孙小波，郭景杰，安阁英，贾均（1999）. Ti-6Al-4V熔模精密铸造充型及凝固过程计算机模拟. 《材料科学与工艺》.
824. 贾均，祝汉良，郭景杰（1999）. 压铸型与铝铸件焊合缺陷形成的理论分析. 《铸造》.
825. 苏彦庆，郭景杰，贾均，丁宏升（1999）. 真空熔炼TiAl金属间化合物过程中合金元素的挥发行为. 《铸造》.
826. 苏彦庆，任志江，郭景杰，贾均（1999）. TiAlSn合金ISM熔炼过程中氮元素的熔解与控制. 《铸造》.
827. Guo Jingjie, Su Yanqing, Jun Jia, Hongsheng Ding, Liu Yuan, Ren Zhijiang (1999). Mechanism of skull formation during induction skull melting of intermetallic compounds. International Journal of Cast Metals Research.DOI
828. 祝汉良，郭景杰，贾均，丁宏升，苏彦庆（1998）. 固溶处理对A357合金组织及力学性能的影响. 《宇航材料工艺》.
829. 李邦盛，郭景杰，董世运，蒋海燕，李志强（1998）. 钛合金熔模精铸锆溶胶涂料流变性能的研究. 《特种铸造及有色合金》.
830. 苏彦庆，贾均，郭景杰，丁宏升（1998）. Ti-Al二元系活度计算. 《铸造》.
831. 丁宏升，郭景杰，苏彦庆，贾均（1998）. 复合氧化物喷涂金属型铸造纯钛的界面反应研究. 《铸造》.
832. 郭景杰（1998）. 钛合金ISM熔炼过程热力学与动力学分析.
833. 蒋海燕，李邦盛，郭景杰，董世运，李志强（1998）. 液钛与陶瓷界面反应的研究. 《铸造》.
834. 郭景杰，丁宏升，苏彦庆，贾均（1998）. 等离子喷涂金属型与钛熔体的界面反应研究. 《铸造》.
835. 贺跃辉，黄伯云，王彬，刘咏，王健农，郭景杰（1998）. TiAl基合金固态焊接. 《金属学报》.
836. 李邦盛，郭景杰，蒋海燕，董世运，李志强（1998）. 钛合金熔模精铸ZrO2（CaO）粉锆溶胶涂料层力学性能的研究. 《铸造》.
837. 盛文斌，郭景杰，苏彦庆，丁宏升，贾均（1998）. 浇注时功率(ISM)对TiAl基合金铸件表面质量的影响. 《特种铸造及有色合金》.
838. 唐玉林，孙国雄，郭景杰（1998）. 第19届国际压铸会议及展览会述评. 《特种铸造及有色合金》.DOI
839. 苏彦庆，郭景杰，贾均（1997）. 反应性金属的熔炼技术. 《铸造》.
840. 郭景杰，王同敏，苏彦庆，丁宏升，贾均（1997）. 钛的水冷铜坩埚感应熔炼温度场数值模拟. 《铸造》.
841. 祝汉良，郭景杰，贾均，赵九洲，李沛勇（1997）. 铸造Al-Si-Mg合金的时效特性及形变机制. 《中国有色金属学报》.
842. 李沛勇，贾均，郭景杰（1997）. 亚共晶Al-Si合金熔体处理的研究进展. 《特种铸造及有色合金》.
843. 祝汉良，贾均，郭景杰，赵九洲，李沛勇，杨秀玲，朱键，王惟一（1997）. 高强韧A357合金凝固组织及热处理工艺的研究. 《特种铸造及有色合金》.DOI
844. 郭景杰，贾均，李庆春，李邦盛（1991）. 铸铁快速凝固条件下共晶生长. 《金属学报》.
845. 郭景杰，李庆春，贾均，柳百成，周昌炽（1991）. 铸铁激光表面重熔过程中表面涂层的作用. 《材料科学与工艺》.
846. Guo Jingjie, LI Qing-chun, Jia Jun, Cui Cengsong (1991). Laser Surface Alloying of Spheroidal-graphite Iron with Tungsten Carbide. Cast Metals.DOI
847. 郭景杰，柳百成，周昌炽（1990）. 不同基体球铁的激光表面重熔组织. 《材料科学与工艺》.
848. 贾均，张景辉，郭景杰，朱培钺，张晓明（1986）. 铸铁气动孕育法的可行性研究. 《材料科学与工艺》.

预印本

1. Qiang Wu, Xiao Liang, Hongli Kang, Feifei Huang, Shichao Liu, Ruirun Chen, Jingjie Guo (2025). Theoretical and experimental analysis of Nb-based alloy membranes at non-dilute hydrogen concentration. SSRN Electronic Journal.DOI
2. Hongli Kang, Xiao Liang, Feifei Huang, Qiang Wu, Songsong Xu, Ruirun Chen, Jingjie Guo (2025). Solubility–Diffusivity Synergy Governing Hydrogen Transport in V–Ni–Mn Membranes. SSRN Electronic Journal.DOI
3. Yong Yang, Binbin Wang, Baoxian Su, Binqiang Li, Jiachen Zhou, Zhe Li, Tong Liu, Liangshun Luo, Liang Wang, Yanqing Su, Jingjie Guo (2024). A Novel Additive Manufacturing Strategy for In-Situ Synthesis of Crack-Free Ni51.8ti48.2 Alloys with Homogeneous Composition and Excellent Functional Properties. SSRN Electronic Journal.DOI
4. Jingjing Liu, Xinzhong Li, Xiao Liang, Hengzhi Fu, Jingjie Guo, Dongmei Liu (2023). Ni-Doped Nbc Films for Remarkably Enhancing Hydrogen Permeation Performance of Nbc/V Composite Membranes. SSRN Electronic Journal.DOI
5. Seung-Mi Kwak, JaeHwang Kim, Hongsheng Ding, He Liang, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2023). Prediction of the Tensile Strength, and Nanoindentation Hardness of Directionally Solidified Tial Alloy by Machine Learning Based on Changed Training-Test Size Ratio. SSRN Electronic Journal.DOI
6. Zhaobo Li, Liangshun Luo, Binbin Wang, Liang Wang, Yanqing Su, Jingjie Guo, Hengzhi Fu (2023). Effect of Zr Addition on the Microstructures and Mechanical Properties of Nb-16si-22ti-2al-2cr Alloys. SSRN Electronic Journal.DOI
7. Shuting Zhang, Xin Ding, Xuefeng Gao, Ruirun Chen, Shiping Wu, Yanqing Su, Jingjie Guo (2022). Synergetic Enhancement of Strength and Ductility Via a Heterogeneous Structure with Short-Range Clustering: A Novel Ti-V-Zr Medium Entropy Alloy. SSRN Electronic Journal.DOI
8. Shiqiu Liu, Hongsheng Ding, Ruirun Chen, Jingjie Guo, Hengzhi Fu (2021). High-Density Deformation Nanotwin Further Improved Tensile Strength of Polycrystalline γ-TiAl-Based Intermetallic Alloy. SSRN Electronic Journal.DOI
9. Xuefeng Gao, Ruirun Chen, Tong Liu, Hongze Fang, Gang Qin, Yanqing Su, Jingjie Guo (2021). A Novel Metastable FCC High Entropy Alloy with Excellent As-Cast Strength-Ductility Synergy by Utilizing Heterogeneous Structure and Twinning-Induced Plasticity. SSRN Electronic Journal.DOI

书籍章节

1. Hongsheng Ding, Kun He, Shiqiu Liu, Yongwang Kang, Jingjie Guo (2016). Improving the Performance of Nb-Silicide Based Refractory Alloys Through A Novel Cold Crucible Directional Solidification. John Wiley & Sons, Inc. eBooks.DOI
2. Hai-jun Gong, Xinzhong Li, Daming Xu, Jingjie Guo (2014). Numerical simulation of transport phenomena during strip casting with EMBr in a single belt caster. Journal of Central South University.DOI