冯莹莹｜东北大学｜学者主页

2026

固溶处理对X65/Inconel 625热轧复合板组织和性能的影响

廖宏义，范明荣，刘苡含，王天宇，冯莹莹，骆宗安

《锻压技术》

DOI

2026

Predictive performance of various yield criteria for the yielding behaviour of stainless-steel/aluminium-alloy double-layer y-shaped tubes

Yingying Feng, Shuo Geng, Guopeng Chen, Junyang Wang, Zongan Luo

Modelling and Simulation in Materials Science and Engineering

DOI

2025

轧制碳钢/不锈钢复合板残余应力分布的数值模拟以及调控

冯莹莹，周俊甫，郭学浩，孙晓倩

《机械工程材料》

2025

轧制及热处理工艺对3Cr2NiMo钢特厚板力学性能的影响

孔令熠，骆宗安，冯莹莹，邬早勤

《精密成形工程》

2025

退火温度对预制波纹轧制钛/钢复合板组织和性能的影响

冯莹莹，单杰，廖宏义，耿硕，王明坤

《材料热处理学报》

2025

材料虚拟表征实验室开发与应用

高彩茹，彭良贵，丁桦，陈俊，王建，王佳夫，吴红艳，冯莹莹，张维娜，薛文颖，赵文柱

《中国冶金教育》

DOI

2025

Effect of Heat Treatment on Microstructure Evolution and Fracture Mechanism of 30CrMo/316L Multilayered Composites Fabricated by Vacuum Electron Beam Welding and Accumulative Hot Roll Bonding

Ming-Rong Fan, Tianyu Wang, Jing-Gang Suo, Mingkun Wang, Yingying Feng, Zongan Luo

Acta Metallurgica Sinica (English Letters)

DOI

2025

Cross scale numerical simulation and experimental study on hydroforming of double-layer Y-shaped tube

Yingying Feng, G. Chen, Shuo Geng, Jie Shan

Modelling and Simulation in Materials Science and Engineering

DOI

2024

组坯方式及轧制工艺对钛/钢复合板组织和性能的影响

王明坤，骆宗安，周宏宇，冯莹莹

《中国有色金属学报》

2024

Study on Mg segregation, microstructure evolution and fracture behavior of hot-press sintered (TiC+B4C)/6061Al composites after T4 heat treatment

Zhaosong Liu, Z.A. Luo, Xin Zhang, Yingying Feng, Jinsong Yang

Journal of Materials Research and Technology

DOI

2024

Study on microstructure and mechanical properties of (TiC+B4C)/6061Al composites prepared by vacuum hot-press sintering method

Zhaosong Liu, Z.A. Luo, Xin Zhang, Yingying Feng, Mingkun Wang, Jinsong Yang

Journal of Manufacturing Processes

DOI

2024

Hot deformation behavior of 30MnB5V steel: Phenomenological constitutive model, ensemble learning algorithm, hot processing map and microstructure evolution

Ming-rong Fan, Zong-an Luo, Yihan Liu, Yingying Feng

Journal of Materials Research and Technology

DOI

2024

Study on the microstructure, recrystallization, and mechanical properties of hot-press sintered (TiC + B4C)/6061Al composites during hot rolling

Zhaosong Liu, Z.A. Luo, Xin Zhang, Jinsong Yang, Yingying Feng, Peng Wu

Materials Characterization

DOI

2024

Comparative study on microstructure evolution, mechanical properties, and wear behavior of TiC and B4C single-reinforced and hybrid-reinforced Al–Mg–Si alloys by vacuum hot-press sintering

Zhaosong Liu, Z.A. Luo, Yingying Feng, Xin Zhang, Jinsong Yang, Tingyu Huang

Journal of Materials Research and Technology

DOI

2024

Predictive modeling of Loading paths for Hydroforming of bi-layered Y-shaped tubes

Yingying Feng, Yue Jia, Guopeng Chen, Xiaoqian Sun

International Journal of Material Forming

DOI

2024

Optimization of bi-layered Y-shaped tube hydroforming using RSM

Yingying Feng, Yue Jia, Xiaoqian Sun, Guopeng Chen, Zongan Luo

The International Journal of Advanced Manufacturing Technology

DOI

2023

Y形管内高压成形过程数值模拟与实验研究

冯莹莹，孙晓倩，贾越，骆宗安，吴庆林

《锻压技术》

DOI

2023

Study on the enhancement mechanism of (TiC + B4C)/6061Al composite fabricated via vacuum hot-press sintering

Zhaosong Liu, Z.A. Luo, Yingying Feng, Xin Zhang

Materials Letters

DOI

2023

Effect of heat treatment on the microstructure, impact toughness and wear resistance of Fe-based/B4C composite coating by vacuum cladding

Z.A. Luo, Huan Yu, Jin‐Song Yang, Yingying Feng, Guangming Xie, R.D.K. Misra

Surface and Coatings Technology

DOI

2023

Numerical simulation and experimental research on submerged arc welding of stainless steel composite plate

Yingying Feng, Enqi Xu, Jun-Fu Zhou, Xiao-Qian Sun, Zong-An Luo

The International Journal of Advanced Manufacturing Technology

DOI

2023

Hydroforming of double-layer Y-shaped tube controlled by a novel backward punch shape

Yingying Feng, Yue Jia, Xiao-Qian Sun, Guopeng Chen, Zong-An Luo

International Journal of Structural Integrity

DOI

2022

一种新型双层X形管内高压成形加载路径的智能优化方法

冯莹莹，骆宗安，刘照松，吴庆林

《哈尔滨工程大学学报》

2022

X形管内高压成形过程的加载路径优化

冯莹莹，刘照松，张宏阁，骆宗安

《锻压技术》

2022

Effect of Cu additions on the microstructure, wear resistance and corrosion resistance of Fe-based/B4C composite coating by vacuum cladding

Huan Yu, Z.A. Luo, Yingying Feng, Zhaosong Liu, Guangming Xie, R.D.K. Misra

Surface and Coatings Technology

DOI

2022

A comparative study of the microstructure and corrosion resistance of Fe-based/B4C composite coatings with Ni-added or Cu-added by vacuum cladding

Huan Yu, Z.A. Luo, Xin Zhang, Yingying Feng, Guangming Xie

Materials Letters

DOI

2022

Effect of Ni additions on microstructure, interfacial diffusion behavior and properties of Fe-based/B4C composite coating by vacuum cladding

Huan Yu, Zongan Luo, Guangming Xie, Yingying Feng

Materials Characterization

DOI

2021

内高压成形寻优控制

苏海龙，骆宗安，冯莹莹

《塑性工程学报》

2021

Application of RSM in optimization of bi-layered X-type tube hydroforming

Yingying Feng, Zhaosong Liu, Zong-an Luo, Qinglin Wu

The International Journal of Advanced Manufacturing Technology

DOI

2021

On the Microstructure and Wear Behavior of Fe‐Based/B4C Composite Coating Processed by Vacuum Cladding

Huan Yu, Zongan Luo, Yingying Feng, Yuhao Wang, Guangming Xie, R.D.K. Misra

steel research international

DOI

2021

Effect of electron beam welding parameters on temperature and stress field of AISI P20 tool steel in vacuum roll-cladding process

L.Y. Mao, Z.A. Luo, Yingying Feng, Xiaoming Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2021

Influence of Ni content on the microstructure and reciprocating wear of Fe-based/B4C composite coating by vacuum cladding

Huan Yu, Zongan Luo, Yuhao Wang, Yingying Feng, Guangming Xie, R.D.K. Misra

Surface and Coatings Technology

DOI

2020

T形管内高压成形过程加载路径的优化方法

冯莹莹，骆宗安，张宏阁，毛蓝宇

《哈尔滨工程大学学报》

2020

考虑强度差效应的非对称Drucker屈服模型及实验验证

王中美，刘纪源，唐炳涛，冯莹莹，郭宁，戈海龙

《塑性工程学报》

2019

The Impact of Process Parameters on Microstructure and Mechanical Properties of Stainless Steel/Carbon Steel Clad Rebar

Yingying Feng, Huan Yu, Zong-an Luo, R.D.K. Misra, Guangming Xie

Materials

DOI

2019

Application of Siemens PLC in Thermal Simulator Control System

Hailong Su, Zongan Luo, Yingying Feng, Zhaosong Liu

Procedia Manufacturing

DOI

2018

Loading path optimization of T tube in hydroforming process using response surface method

Yingying Feng, Zhang Hong-ge, Zong-an Luo, Qinglin Wu

The International Journal of Advanced Manufacturing Technology

DOI

2018

The Impact of Surface Treatment and Degree of Vacuum on the Interface and Mechanical Properties of Stainless Steel Clad Plate

Yingying Feng, Huan Yu, Zongan Luo, Guangming Xie, Ranjeev Misra

Materials

DOI

2017

Research on the optimization mechanism of loading path in hydroforming process

Yingying Feng, Zong-an Luo, Hailong Su, Qinglin Wu

The International Journal of Advanced Manufacturing Technology

DOI

2015

钢管超快冷过程数学模型的研究与开发

冯莹莹，骆宗安，王立鹏，回楠木

《哈尔滨工程大学学报》

2014

超快速连续退火对低Si系Nb-Ti微合金化TRIP钢组织和力学性能的影响

骆宗安，刘纪源，冯莹莹，彭文

《金属学报》

2012

模糊控制策略对焊接热模拟温度控制的优化

冯莹莹，骆宗安，张殿华，苏海龙，王黎筠

《钢铁研究学报》

2009

BP神经网络PID控制对液压伺服控制的改进

张殿华，冯莹莹，骆宗安，苏海龙，王黎筠

《钢铁研究学报》

2008

MMS-200热力模拟实验机焊接热循环软件研制

冯莹莹，骆宗安，张殿华，魏瑾，王黎筠

《钢铁研究学报》

精选作品

期刊论文

固溶处理对X65/Inconel 625热轧复合板组织和性能的影响

Predictive performance of various yield criteria for the yielding behaviour of stainless-steel/aluminium-alloy double-layer y-shaped tubes

轧制碳钢/不锈钢复合板残余应力分布的数值模拟以及调控

轧制及热处理工艺对3Cr2NiMo钢特厚板力学性能的影响

退火温度对预制波纹轧制钛/钢复合板组织和性能的影响

材料虚拟表征实验室开发与应用

Effect of Heat Treatment on Microstructure Evolution and Fracture Mechanism of 30CrMo/316L Multilayered Composites Fabricated by Vacuum Electron Beam Welding and Accumulative Hot Roll Bonding

Cross scale numerical simulation and experimental study on hydroforming of double-layer Y-shaped tube

组坯方式及轧制工艺对钛/钢复合板组织和性能的影响

Study on Mg segregation, microstructure evolution and fracture behavior of hot-press sintered (TiC+B4C)/6061Al composites after T4 heat treatment

Study on microstructure and mechanical properties of (TiC+B4C)/6061Al composites prepared by vacuum hot-press sintering method

Hot deformation behavior of 30MnB5V steel: Phenomenological constitutive model, ensemble learning algorithm, hot processing map and microstructure evolution

Study on the microstructure, recrystallization, and mechanical properties of hot-press sintered (TiC + B4C)/6061Al composites during hot rolling

Comparative study on microstructure evolution, mechanical properties, and wear behavior of TiC and B4C single-reinforced and hybrid-reinforced Al–Mg–Si alloys by vacuum hot-press sintering

Predictive modeling of Loading paths for Hydroforming of bi-layered Y-shaped tubes

Optimization of bi-layered Y-shaped tube hydroforming using RSM

Y形管内高压成形过程数值模拟与实验研究

Study on the enhancement mechanism of (TiC + B4C)/6061Al composite fabricated via vacuum hot-press sintering

Effect of heat treatment on the microstructure, impact toughness and wear resistance of Fe-based/B4C composite coating by vacuum cladding

Numerical simulation and experimental research on submerged arc welding of stainless steel composite plate

Hydroforming of double-layer Y-shaped tube controlled by a novel backward punch shape

一种新型双层X形管内高压成形加载路径的智能优化方法

X形管内高压成形过程的加载路径优化

Effect of Cu additions on the microstructure, wear resistance and corrosion resistance of Fe-based/B4C composite coating by vacuum cladding

A comparative study of the microstructure and corrosion resistance of Fe-based/B4C composite coatings with Ni-added or Cu-added by vacuum cladding

Effect of Ni additions on microstructure, interfacial diffusion behavior and properties of Fe-based/B4C composite coating by vacuum cladding

内高压成形寻优控制

Application of RSM in optimization of bi-layered X-type tube hydroforming

On the Microstructure and Wear Behavior of Fe‐Based/B4C Composite Coating Processed by Vacuum Cladding

Effect of electron beam welding parameters on temperature and stress field of AISI P20 tool steel in vacuum roll-cladding process

Influence of Ni content on the microstructure and reciprocating wear of Fe-based/B4C composite coating by vacuum cladding

T形管内高压成形过程加载路径的优化方法

考虑强度差效应的非对称Drucker屈服模型及实验验证

The Impact of Process Parameters on Microstructure and Mechanical Properties of Stainless Steel/Carbon Steel Clad Rebar

Application of Siemens PLC in Thermal Simulator Control System

Loading path optimization of T tube in hydroforming process using response surface method

The Impact of Surface Treatment and Degree of Vacuum on the Interface and Mechanical Properties of Stainless Steel Clad Plate

Research on the optimization mechanism of loading path in hydroforming process

钢管超快冷过程数学模型的研究与开发

超快速连续退火对低Si系Nb-Ti微合金化TRIP钢组织和力学性能的影响

模糊控制策略对焊接热模拟温度控制的优化

BP神经网络PID控制对液压伺服控制的改进

MMS-200热力模拟实验机焊接热循环软件研制

书籍章节

Application and Prospects of Vacuum Composite Manufacturing Technology in Other Fields

Evolution Mechanism and Process of Interface Products in Vacuum Rolled Titanium/Steel Clad Plates

Vacuum Rolling Austenitic Corrosion-Resistant Alloy Composite Steel Plate

Theoretical Basis of Laminated Metal Solid-Phase Bonding

Hot Compression Deformation, Constitutive Model, and Microstructure Evolution of Austenitic-TWIP/Martensitic-HFS Composite Steel

研究方向