百晓学者学者目录

邱然锋

教授，河南科技大学

精选作品

期刊论文

2026

基于Nb-Ni中间层的钛/钢电阻点焊接头的组织与性能

王楠楠，李罡，祝士博，石红信，邱然锋，姚怀

《材料热处理学报》

2026

基于异质电极的钛/铜异种金属电阻点焊

苏付豪，刘乾森，邱然锋，石红信，里中忍

《材料热处理学报》

DOI

2026

铌+铜复合中间层辅助钛/钢电阻点焊接头的组织与性能

祝士博，李罡，王楠楠，石红信，邱然锋，里中忍

《材料热处理学报》

DOI

2026

铝/铝蓝-红激光复合焊接接头的组织和力学性能

尹舰航，唐亚龙，石红信，邱然锋，肖笑，里中忍

《材料热处理学报》

DOI

2026

扩散焊温度对TC4/GH4169接头组织和性能的影响

于卓立，龙伟民，朱世博，常云峰，于兵，邱然锋，于华，江涛，高奇，孙逸翔，李爱国

《材料热处理学报》

2026

基于冶金-结构协同调控第三体的镁合金/钢电阻点焊

张清扬，邱然锋，赵培峰，石红信

《材料热处理学报》

DOI

2026

不同Y含量的固溶态Mg-Zn-Mn合金的显微组织与力学性能

赵彦淳，姚怀，张雪莹，熊毅，邱然锋，文九巴

《材料热处理学报》

2026

Microstructure and properties of resistance spot welded Al/Cu joint with an interlayer of zinc

Qiansen Liu, Ran-Feng Qiu, F. Su, Hong-Xin Shi

Journal of materials science. Materials in electronics

DOI

2026

In Situ Reaction of Cu/Zr Diffusion Bonded with GH4169/Ti60 Dissimilar Metal Joints

Zhuo-li Yu, Wei-Min Long, Ran-Feng Qiu, Shi-Bo Zhu, Sen Yang, Jian Qin, Yin-Yin Pei, Tao Jiang, Liang-Liang Zhang, Hua Yu

ACS Applied Engineering Materials

DOI

2026

Interfacial Characteristics of Ti/Steel Joints Welded by Resistance Spot Welding with Bi-Interlayer of Nb-Ni

Tong Wu, Xiaowen Li, Yaqiang Wang, Nannan Wang, Ranfeng Qiu, ShengXiong Tang

Materials

DOI

2025

碳纤维增强复合材料/Q235低碳钢的自冲铆接-电阻点焊复合连接

石红信，张肖飞，邱然锋，周志丹，肖笑，里中忍

《材料热处理学报》

2025

基于中间层Zn的镁合金/钢焊接接头的组织与性能

张清扬，戚昊，李罡，崔东升，田浩楠，赵培峰，邱然锋，石红信

《材料热处理学报》

2025

铝/铜电阻点焊接头的组织与性能

刘乾森，苏付豪，邱然锋，石红信，兖利鹏

《材料热处理学报》

2025

钛/钢电阻单元焊接头的组织与性能研究

王楠楠，张家宁，赵培峰，石红信，邱然锋

《热加工工艺》

DOI

2025

The Performance of Ti/Steel Joints Welded by Resistance Spot Welding with a Nickel Interlayer

Nan-Nan Wang, Gang Li, Yanling Hu, Hong-Xin Shi, Ran-Feng Qiu, Keke Zhang

Materials

DOI

2025

Microstructure and properties of joint of Al/Cu welded by resistance element welding with an auxiliary gasket of Ni

Dongsheng Cui, Jing Wang, Ran-Feng Qiu, Hong-Xin Shi, Li-Peng Yan

Scientific Reports

DOI

2025

Resistance Element Welding Between Magnesium Alloy and Aluminum Alloy Using an Al Rivet

Jing Wang, Ran-Feng Qiu, Dongsheng Cui, Hong-Xin Shi

Advanced Engineering Materials

DOI

2025

Microstructure and properties of joint of Mg/Al resistance element welding with a magnesium element

Jing Wang, Yanling Hu, Ran-Feng Qiu, Hong-Xin Shi

Journal of manufacturing science and engineering

DOI

2025

Distribution characteristics of interfacial reaction layer and its effect in resistance spot welded Ti/Q235 joint with an interlayer of niobium

Nannan Wang, Ranfeng Qiu, Hongxin Shi, Lipeng Yan, Huai Yao, Keke Zhang

Journal of Materials Research and Technology

DOI

2025

Microstructure and Properties of Mg/Ti Joint Welded by Resistance Spot Welding with a Brass Interlayer

Nannan Wang, Jing Zhe Wang, Yanling Hu, Ranfeng Qiu, Hongxin Shi, Keke Zhang

Journal of Materials Engineering and Performance

DOI

2025

Multiple microstructure evolution and mechanical properties of GH4169/TC4 brazed joint

Zhuoli Yu, Liangliang Zhang, Yixiang Sun, Ranfeng Qiu, Hua Yu, Qi Gao, Weimin Long

Materials Today Communications

DOI

2024

基于钛质铆钉的低碳钢/钛电阻单元焊接接头的组织与性能

田浩楠，王楠楠，朱少航，石红信，邱然锋

《材料热处理学报》

2024

基于钢质铆钉的钛与低碳钢电阻单元焊接接头的组织与性能

朱少航，王楠楠，田浩楠，石红信，邱然锋，里中忍

《材料热处理学报》

2024

钛/铝异种金属熔钎焊工艺的研究进展

崔东升，王景，于卓立，李罡，祝士博，张清扬，邱然锋

《材料热处理学报》

2024

基于非对称电极的镁/钛电阻点焊接头的组织与性能

王景，崔东升，于卓立，石红信，邱然锋，朱锦洪

《材料热处理学报》

2024

Resistance Rivet Welding of Aluminum Alloy and Steel with a Supplementary Plate

Hong-Xin Shi, Shibo Zhu, Yanling Hu, Hanxu Guo, Xiao Xiao, Ran-Feng Qiu

Journal of materials engineering and performance (Print)

DOI

2024

Performance and Interfacial Microstructure of Al/Steel Joints Welded by Resistance Element Welding

Nan-Nan Wang, Jinpeng Li, Wenjie Wu, Xiaohui Bao, Kexu Ren, Jianghui Zhao, Huai Yao, Ran-Feng Qiu

Materials

DOI

2024

Microstructure and properties of Mg/Ti joint welded by resistance spot welding with an aluminum interlayer

Jing Wang, Dongsheng Cui, Yanling Hu, Ran-Feng Qiu, Hong-Xin Shi, Peifeng Zhao

Journal of Vacuum Science & Technology A

DOI

2024

Microstructure and performance of joint of Al/Cu welded by resistance element welding with an auxiliary gasket

Dongsheng Cui, Jing Wang, Yanling Hu, Ran-Feng Qiu, Hong-Xin Shi, Peifeng Zhao

Journal of Vacuum Science & Technology A

DOI

2023

钛/低碳钢的自冲铆-电阻点焊复合连接工艺研究

赵培峰，张家宁，石红信，邱然锋

《热加工工艺》

2023

基于镁质铆钉的铝合金/镁合金电阻单元焊接接头的组织与性能

赵培峰，顾伟文，王楠楠，石红信，邱然锋

《材料热处理学报》

2023

Al2O3颗粒直径对1 vol%的Al2O3/Cu基复合材料组织和性能的影响

赵培峰，赵江辉，石红信，邱然锋，贾淑果

《材料热处理学报》

2023

Al含量对挤压态Mg-2.0Zn-0.4Mn合金组织及耐腐蚀性能的影响

赵培峰，王玉辉，邱然锋，石红信，姚怀

《材料热处理学报》

2023

铆钉硬度对铝合金/钢自冲铆接头特征参量与性能的影响

赵培峰，王增强，石红信，邱然锋

《材料热处理学报》

2023

以铝质铆钉为单元件的铝合金/钢的电阻单元焊

赵培峰，赵江辉，石红信，邱然锋

《材料热处理学报》

2023

铆钉硬度对铝合金/钢电阻铆焊接头性能的影响

王增强，邱然锋，张坤，闫炳辰，孟令燃，赵培峰

《材料热处理学报》

2023

铌中间层对钛与Q235低碳钢电阻点焊接头组织和性能的影响

张坤，王楠楠，王增强，闫炳辰，邱然锋

《材料热处理学报》

2023

钛及钛合金表面自纳米化技术研究现状

王楠楠，任柯旭，邱然锋

《热加工工艺》

2023

Characterization of resistance spot welded joints between aluminum alloy and mild steel with composite electrodes

Ranfeng Qiu, Jiuyong Li, Hongxin Shi, Hua Yu

Journal of Materials Research and Technology

DOI

2023

Resistance element welding of aluminium alloy and steel using an element of aluminium

Ran-Feng Qiu, Pei-Feng Zhao, Jianghui Zhao, H. Shi, Hua Yu

Science and technology of welding and joining

DOI

2022

凹模形状对铝合金/钢电阻铆焊接头性能的影响

侯平均，王增强，邱然锋，周小娟

《材料热处理学报》

2022

基于定位电极的铝合金/钢电阻铆焊接头的组织与性能

张家宁，周小娟，石红信，赵培峰，邱然锋，侯平均

《材料热处理学报》

2022

基于铆钉辅助的铝合金/钢电阻点焊接头的组织与性能

赵江辉，任柯旭，赵培峰，石红信，邱然锋，侯平均

《材料热处理学报》

2022

不同扩散焊工艺下以钽+铜为复合中间层的钛合金/不锈钢接头性能

陈一帆，张占领，邱然锋

《机械工程材料》

2021

铝合金/钢的点连接技术研究现状

任柯旭，邱然锋，张肖飞，赵江辉

《材料热处理学报》

DOI

2021

辅助垫片对铝/钢电阻铆焊接头性能的影响

周小娟，侯平均，邱然锋，石红信，张占领，张瑞英

《材料热处理学报》

DOI

2021

钛与低碳钢的夹铜电阻点焊接头的特性

石红信，赵江辉，李青哲，邱然锋

《材料热处理学报》

DOI

2021

胶粘剂辅助下CFRP/低碳钢的电阻凸塞焊接头特性

张肖飞，邱然锋，石红信，侯平均

《材料热处理学报》

DOI

2020

Mg96Zn2Y2镁合金点焊接头微观组织特性

罗焰，刘进厂，邱然锋，石红信

《材料热处理学报》

DOI

2020

铝合金/低碳钢的电阻铆焊接头特性

张瑞英，贺玉刚，石红信，张占领，邱然锋

《材料热处理学报》

DOI

2020

铝合金与低碳钢的复合电极电阻点焊工艺

肖笑，石红信，邱然锋，任柯旭，里中忍

《材料热处理学报》

DOI

2020

铆接力对铝/钢自冲铆接头几何特性的影响

李建军，侯平均，贺玉刚，邱然锋

《电焊机》

2020

Joining Aluminum Alloy to Steel by Resistance Projection-Plug Welding

K. Ren, Ran-Feng Qiu, Hengbo Ma, H. Shi

Journal of materials engineering and performance (Print)

DOI

2019

以铌为中间层的钛与低碳钢的电阻点焊

邱然锋，李青哲，赵洋洋，石红信

《稀有金属材料与工程》

2019

铝合金与钢的电阻凸塞焊

任柯旭，邱然锋，石红信，马恒波，张肖飞

《材料热处理学报》

DOI

2019

钛与不锈钢的夹Nb层电阻点焊

任柯旭，马恒波，李丹，邱然锋，石红信

《材料热处理学报》

DOI

2019

基于中间层的铝合金/钢电阻点焊

王楠楠，邱然锋，石红信

《材料热处理学报》

DOI

2019

铜/铝固态界面金属间化合物的生长行为

马恒波，任柯旭，邱然锋，石红信

《材料热处理学报》

DOI

2019

铝/钢固态焊接合界面金属间化合物生长机制

申中宝，邱然锋，石红信，马恒波

《焊接学报》

2019

以NiCr合金为中间层电阻点焊钛与不锈钢接头的组织与剪切力

马恒波，邱然锋，李丹，石红信，张占领

《机械工程材料》

2019

316L不锈钢TIG焊增材电弧物理特性分析

尹玉祥，肖笑，邱然锋，张柯柯

《电焊机》

2019

等离子填丝-注射设备的控制系统设计

杨继刚，朱锦洪，张兵权，邱然锋，赵洋洋

《河南科技大学学报(自然科学版)》

DOI

2019

Growth characterization of intermetallic compounds at the Cu/Al solid state interface

Hengbo Ma, Kexu Ren, Xiao-Yan Xiao, Ran-Feng Qiu, H. Shi

Materials Research Express

DOI

2019

Growth Characterization of Intermetallic Compound at the Ti/Al Solid State Interface

Yangyang Zhao, Jiuyong Li, Ran-Feng Qiu, H. Shi

Materials

DOI

2019

Microstructure of Mg96Zn2Y2 alloy joint formed by resistance spot welding

X. Gao, Tian-Yi Gao, Ran-Feng Qiu, C. Iwamoto, S. Satonaka

Materials Research Express

DOI

2018

基于Ni中间层的钛与不锈钢电阻点焊

李丹，邱然锋，任柯旭，石红信

《材料热处理学报》

2018

钛与低碳钢的电阻点焊

邱然锋，李青哲，石红信，里中忍

《焊接学报》

2018

以铌+铜为复合中间层扩散焊接钛合金/不锈钢接头的组织与性能

陈一帆，张占领，邱然锋

《机械工程材料》

2018

Study on the Growth Mechanism of Intermetallic Compounds in Solid Interface of Aluminum / Steel

Hengbo Ma, Ran-Feng Qiu, Jiuyong Liu, Yangyang Zhao

DOI

2018

Microstructure of Al/Ti diffusion couple by resistance spot welding and annealing

Yangyang Zhao, Ran-Feng Qiu, Jiuyong Li

DOI

2018

Effect of Heat Treatment Temperature on the Growth of Al / Ti Joining Interface Reaction Layer

Jiuyong Li, Ran-Feng Qiu, Yangyang Zhao, Hengbo Ma

DOI

2017

铝合金/低碳钢点焊界面反应物生长机制

邱然锋，李久勇，贺玉刚，石红信，SATONAKAS

《中国有色金属学报》

2017

非等厚不锈钢板电阻点焊的熔核偏移

邱然锋，李久勇，张振伟，王彤勇，刘肖扬

《河南科技大学学报(自然科学版)》

2017

铝合金与低碳钢的复合电极电阻点焊接头特性

邱然锋，李久勇，崔立虎，石红信

《焊接学报》

2017

钛表面电火花沉积涂层的微观特征及性能

吴公一，于华，张占领，邱然锋，张柯柯

《河南科技大学学报(自然科学版)》

2017

Resistance spot welding between aluminum and magnesium with zinc and tin insert

Ning Wang, Ran-Feng Qiu, Dan Li, Yugang He

DOI

2017

Study on Microstructure of Aluminum / Steel Self - riveting - Resistance Spot Welding Joint

Yugang He, Ran-Feng Qiu, Ning Wang, Dan Li

DOI

2017

Microstructure and mechanical property of resistance spot welded joint between pure titanium and stainless steel with interlayer of Nb

Dan Li, Ranfeng Qiu, Ning Wang, Yugang He

International Conference on Measurement, Instrumentation and Automation (ICMIA)

DOI

2016

高强镁合金点焊接头性能

邱然锋，申中宝，李青哲，石红信，里中忍，木下明

《焊接学报》

2016

基于非对称电极的铝合金/钢电阻点焊

潘庆军，崔立虎，邱然锋，李久勇，石红信，祝要民

《电焊机》

2016

基于Ta过渡层的钛与不锈钢电阻点焊

邱然锋，侯龙龙，李丹，石红信，郭俊卿

《电焊机》

2016

纯钛/铝合金A6061电阻点焊接头性能

石红信，王亚洁，牛景锐，邱然锋

《电焊机》

2016

铝合金与钢的电阻铆焊

邱然锋，申中宝，李青哲，石红信，王楠楠

《焊接学报》

2016

低碳钢Q235连续驱动摩擦焊接头性能的研究

李建军，李青哲，邱然锋

《机械工程师》

2016

钛/钢异种金属焊接的研究现状

祝要民，李青哲，邱然锋，贺玉刚

《电焊机》

2016

TA2表面电火花沉积Zr/WC复合涂层特性及界面行为研究

吴公一，张占领，孙凯伟，于华，邱然锋，石红信，张柯柯

《表面技术》

2016

Effect on interface and property of Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints in severe thermal cycling

Xing-Dong Guo, Ke-Ke Zhang, Ran-Feng Qiu, Hong-Xin Shi, Yao-Li Wang, Ning Ma

2016

アルミニウム合金と鋼の電気抵抗はMaoHanである。【JST・京大機械翻訳】

Ran-Feng Qiu, Zhong-Bao Shen, Qing-Zhe Li, Hong-Xin Shi, Nan-Nan Wang

2016

SN2.5AG0.7CU0.1REXNI/CUはんだ継手の界面と継手性能に及ぼす厳しい熱サイクルの影響を研究した。【JST・京大機械翻訳】

Xin-Dong Guo, Ke-Ke Zhang, Ran-Feng Qiu, Hong-Xin Shi, Yao-Li Wang, Ning Ma

2015

基于电场作用下的40Cr/40Cr钢的超塑性固态焊接接头性能及组织研究

张青，丁世伟，孙凯伟，张柯柯，吴公一，于华，邱然锋

《热加工工艺》

2015

铝合金/不锈钢电阻点焊工艺与接头性能研究

李国伟，王楠楠，邱然锋，石红信，张柯柯

《轻合金加工技术》

2015

焊接参数对阻燃镁合金搅拌摩擦焊接头性能的影响

杨彬彬，赵培峰，邱然锋

《轻合金加工技术》

2015

铝合金与低碳钢的夹层电阻点焊接头特性

王楠楠，邱然锋，石红信，张柯柯

《材料热处理学报》

2015

镁合金自冲铆连接技术研究现状

潘庆军，李丽春，邱然锋，石红信

《电焊机》

2015

钛合金航空发动机叶片高温疲劳行为的研究现状

利孝杰，尹丹青，张柯柯，邱然锋

《电焊机》

2015

Resistance Spot Welding between Steel and Aluminum Alloy

L. Cui, Ran-Feng Qiu, Longlong Hou, Zhongbao Shen, Qing-Zhe Li

DOI

2015

Friction Welding of magnesium alloys

Zhongbao Shen, Ran-Feng Qiu, Qing-Zhe Li, Longlong Hou, L. Cui

DOI

2015

Joining steel to aluminum alloy by resistance spot welding with a rivet

Ran-Feng Qiu, Nan-Nan Wang, H. Shi, L. Cui, Longlong Hou, Ke-Ke Zhang

DOI

2015

The mechanical properties of 1060 aluminum joint by continuous drive friction welding

Qing-Zhe Li, Ran-Feng Qiu, Zhongbao Shen, Longlong Hou, L. Cui

DOI

2015

Microstructure and mechanical property of resistance spot welded joint between pure titanium and stainless steel with interlayer of Nb

Longlong Hou, Ran-Feng Qiu, L. Cui, Zhongbao Shen, Qing-Zhe Li

DOI

2014

外能辅助下Sn2.5Ag0.7Cu0.1RE/Cu钎焊接头组织与性能

张晓娇，张柯柯，赵恺，邱然锋，石红信，刘宇杰

《材料热处理学报》

2014

镁合金点焊过程中孔洞形成的工艺依存性

王楠楠，邱然锋，石红信，张柯柯，任凤章，里中忍

《材料热处理学报》

2014

铝合金/钢熔钎焊的研究现状

王楠楠，邱然锋，崔立虎，侯龙龙，张柯柯

《轻合金加工技术》

2014

铝合金与钢的异种材料点连接研究现状

石红信，陈艳平，邱然锋，戴路，张柯柯

《电焊机》

2014

Solid-state bonding of superplastic ultra-high carbon steel and structure steel with an interlayer

Ke-Ke Zhang, Zhong-Hao Heng, Ran-Feng Qiu, H. Shi, Yasuo Takahashi

DOI

2014

Joining phenomena of stainless steel/aluminium alloy joint welded by thermal compensation resistance spot welding

Ran-Feng Qiu, H. Shi, Hua Yu, Ke-Ke Zhang

DOI

2014

Non-parametric effects on pore formation during resistance spot welding of magnesium alloy

Ran-Feng Qiu, N. Wang, H. Shi, K. Zhang, S. Satonaka

DOI

2014

The combined effects of ultrasonic wave and electric field on the microstructure and properties of Sn2.5Ag0.7Cu0.1RE/Cu soldered joints

Ke-Ke Zhang, Xiao-Jiao Zhang, Ran-Feng Qiu, H. Shi, Yu-jie Liu

Journal of Materials Science: Materials in Electronics

DOI

2014

Microstructure and properties of Sn2.5Ag0.7Cu0.1RE lead-free soldering joints with ultrasonic assisted

Yu-jie Liu, Ke Zhang, Xiao-Jiao Zhang, K. Zhao, Ran-Feng Qiu, H. Shi

International Conference on Electronic Packaging Technology

DOI

2013

电场对超声振动辅助Sn2.5Ag0.7Cu0.1RE/Cu润湿适配性的影响

赵恺，张柯柯，张晓娇，刘宇杰，张占领，石红信，邱然锋

《焊接技术》

2013

基于现代工程教育理念的材成专业实践教学体系构建的思考

石红信，邱然锋，陈拂晓，张柯柯，郭俊卿

《科技信息》

2013

铝合金与钢的异种材料离焦激光焊研究现状

尹丹青，邱然锋，王楠楠，石红信，张柯柯

《电焊机》

2013

铝合金与异种金属真空压延接合技术研究现状

邱然锋，尹丹青，王楠楠，石红信，张柯柯，戴路

《轻合金加工技术》

2013

关于实践教学基地师资队伍建设的思考

邱然锋，张柯柯，陈拂晓，郭俊卿，石红信，宋延沛

《中国电力教育》

2013

课堂教学模式改革在焊接基础课中的实践

尹丹青，邱然锋，张柯柯，陈拂晓

《中国电力教育》

2013

Interfacial microstructure and property of resistance spot welding joints of titanium to stainless steel

张晓娇，邱然锋，张柯柯，代乐宜，石红信

China Welding

2013

材料成型及控制工程专业卓越工程师培养的创新与实践

于华，陈拂晓，张柯柯，邱然锋，石红信，郭俊卿

《教育教学论坛》

2013

基于现代工程教育理念的材成专业实践教学体系的构成

邱然锋，陈拂晓，张柯柯，郭俊卿，石红信

《教育教学论坛》

2013

Research status of vacuum roll bonding technology for aluminum alloys and other metals

Ran-Feng Qiu

2012

A6061铝合金与Q235钢电阻点焊接头组织与性能

张柯柯，杜宜乐，邱然锋，石红信，李臣阳

《材料热处理学报》

2012

新时期工科院校结合生产类毕业设计的探索

张鑫，涂益民，石红信，张柯柯，邱然锋

《中国现代教育装备》

2012

预置中间层的1.6C-UHCS/40Cr超塑性焊接工艺试验

衡中皓，张柯柯，邱然锋，涂益民，乔騻，李臣阳

《焊接技术》

2012

Effect of Welding Time on the Joining Phenomena of Diffusion Welded Joint between Aluminum Alloy and Stainless Steel

H. Shi, Shuang Qiao, Ran-Feng Qiu, Xiao-Jiao Zhang, Hua Yu

DOI

2012

Effect of Ni on growing of intermetallic compound in interface of Sn2·5Ag0·7Cu0·1RE/Cu solder joint during aging

K K Zhang, C Y Li, Ranfeng Qiu, Hang Shi, Yu Wang

Materials Science and Technology

DOI

2011

电场作用下1.6%C-UHCS/40Cr钢的超塑性焊接

张柯柯，孙敬，吴志伟，马宁，邱然锋，张占领

《焊接学报》

2011

铝合金与不锈钢电阻点焊接合界面区的组织特性

邱然锋，于华，石红信，张柯柯，涂益民，里中忍

《焊接学报》

2011

热补偿电阻点焊镁合金接头的性能

任鑫磊，邱然锋，李爽爽，李娜，丁源

《轻合金加工技术》

2011

激光滚压焊技术在异种金属连接中的应用

石红信，邱然锋，涂益民，于华

《电气技术与经济》

2011

热补偿电阻点焊铝合金接头的性能

任鑫磊，邱然锋，关精伟，梁欣，李娜

《电焊机》

2011

轻金属材料超声波焊接的研究现状

涂益民，邱然锋，石红信，于华，张柯柯

《轻合金加工技术》

2011

铝合金在日本轨道车辆的应用及相应焊接技术

张占领，邱然锋，杜宜乐，李臣阳，衡中皓

《电焊机》

2011

Analyses of Influencing Factors of Pore Formation during Resistance Spot Welding of Magnesium Alloy

Y. Tu, Ran-Feng Qiu, H. Shi, Hua Yu, Kecheng Zhang

DOI

2011

Resistance Spot Welding between Aluminum Alloy and Low-Carbon Steel

Ran-Feng Qiu, Hua Yu, H. Shi, Kecheng Zhang, C. Iwamoto, S. Satonaka

DOI

2011

Interfacial characteristics of welded joint between aluminum alloy and stainless steel by resistance spot welding

Ran-Feng Qiu, Hua Yu, H. Shi, Ke-Ke Zhan, Y. Tu, S. Shinobu

2011

Properties of Light Metal Joint Welded by Thermal Compensation Resistance Spot Welding

Y. Tu, Ran-Feng Qiu, H. Shi, Hua Yu, Kecheng Zhang

DOI

2011

Influence of Welding Parameters on the Tensile Shear Strength of Aluminum Alloy Joint Welded by Resistance Spot Welding

Ran-Feng Qiu, Zhan-Ling Zhang, Ke-Ke Zhang, H. Shi, Gao-Jian Ding

DOI

2011

Study on the Joining Characteristics of Diffusion Welding Lap Joint with Various Temperatures between Aluminum Alloy and Stainless Steel

H. Shi, Ran-Feng Qiu, Y. Tu, Hua Yu, Dan-Qing Yin

DOI

2010

汽车车身用铝合金与钢的异种材料电阻点焊技术研究现状

邱然锋，石红信，张柯柯，朱锦洪，李建军

《电焊机》

2010

汽车用镁合金薄板点焊新工艺及设备分析

石红信，邱然锋，于华，王要利，丁高剑

《电焊机》

2010

高校工科专业英语的教学研究

邱然锋，石红信，于华，张柯柯

《中国电力教育》

2010

变极性钨极氩弧焊电源主电路设计

石红信，丁高剑，代乐宜，朱锦洪，邱然锋

《电焊机》

2010

汽车车身用高强度钢及其加工性能的探讨

李建军，邱然锋

《汽车工艺与材料》

2010

Study on the Joint of Isothermal Superplastic Solid State Welding between Cr12MoV Steel and 40Cr Steel after Laser Surface Quenching

H. Shi, Zhi Wei Wu, Jing Sun, Hua Yu, Ran-Feng Qiu, Kecheng Zhang

DOI

2010

Effects of welding parameters on the characteristics of magnesium alloy joint welded by resistance spot welding with cover plates

H. Shi, Ran-Feng Qiu, J. Zhu, Kecheng Zhang, Hua Yu, Gao-Jian Ding

DOI

2010

Effects of Electrode Force on the Characteristic of Magnesium Alloy Joint Welded by Resistance Spot Welding with Cover Plates

Ran-Feng Qiu, H. Shi, Hua Yu, Ke-Ke Zhang, Y. Tu, S. Satonaka

DOI

2010

Interfacial reaction layer in resistance spot welded joint between aluminium alloy and austenitic stainless steel

Ran-Feng Qiu, C. Iwamoto, S. Satonaka

DOI

2010

Interface Behavior of Joint between CoCr Coating and Steel 35CrMo Substrate Produced by Electro-Spark Deposition

Hua Yu, Ke Gao, Ran-Feng Qiu, Kecheng Zhang, H. Shi

DOI

2010

Interfacial characterization of joint between mild steel and aluminum alloy welded by resistance spot welding

Ran-Feng Qiu, H. Shi, Ke-Ke Zhang, Y. Tu, C. Iwamoto, S. Satonaka

DOI

2009

关于电阻点焊机节能技术的探讨

李建军，邱然锋

《机械工程师》

2009

In situ scanning electron microscopy observation of fracture crack propagation in the welding interface between aluminium alloy and steel

Ran-Feng Qiu, C. Iwamoto, S. Satonaka

DOI

2009

The influence of reaction layer on the strength of aluminum/steel joint welded by resistance spot welding

Ran-Feng Qiu, C. Iwamoto, S. Satonaka

DOI

2009

Mechanical properties and microstructures of magnesium alloy AZ31B joint fabricated by resistance spot welding with cover plates

Ran-Feng Qiu, S. Satonaka, C. Iwamoto

DOI

2009

Characterization of joint between titanium and aluminum alloy welded by resistance spot welding with cover plate

Ran-Feng Qiu, K. Higuchi, S. Satonaka, C. Iwamoto

DOI

2009

Effect of interfacial reaction layer continuity on the tensile strength of resistance spot welded joints between aluminum alloy and steels

Ran-Feng Qiu, S. Satonaka, C. Iwamoto

DOI

2009

Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate

Ran-Feng Qiu, C. Iwamoto, S. Satonaka

DOI

2006

2752 Resistance Spot Welding with Cover Plate for Magnesium Alloys Mg_ Zn_2Y_2

A. Kinoshita, Ran-Feng Qiu, K. Yoshida, C. Iwamoto, S. Satonaka

DOI

2002

高铝锌合金凝固过程中先共晶富铝相的二次形核与晶粒合并现象

侯平均，武红利，倪锋，孔佑顺，邱然锋

《材料开发与应用》

会议论文

2020

工科研究生创新能力的影响因素及措施分析

邱然锋，肖笑，石红信，任凤章

Proceedings of 2020 International Conference on Advanced Education, Management and Social Science(AEMSS 2020)

DOI

2017

工程教育认证毕业要求达成度的评价

邱然锋，肖笑，石红信，陈拂晓

2017 4th International Conference on Advanced Education Technology and Management Science(AETMS 2017)

2017

“新工科”背景下地方院校工程教育改革探析

石红信，邱然锋，肖笑，陈拂晓

2017 4th International Conference on Advanced Education Technology and Management Science(AETMS 2017)

2017

基于专业认证的材控专业课程体系建设

邱然锋，石红信，肖笑，陈拂晓

2017 4th International Conference on Advanced Education Technology and Management Science(AETMS 2017)

2017

地方高校材成专业“卓越计划”人才培养模式构建与实践

郭俊卿，张柯柯，邱然锋，陈拂晓

Proceedings of 2017 4th International Conference on Advanced Education Technology and Management Science(AETMS 2017)

2014

关于材料成型及控制工程专业“卓越工程师培养计划”实践教学体系构建的思考

邱然锋，陈拂晓，张柯柯，郭俊卿

Proceedings of 2014 2nd International Conference on Applied Social Science Research(ICASSR 2014)

2013

基于学科专业特色的卓越工程师教育培养模式——以河南科技大学材料成型及控制工程本科专业为例

邱然锋，张柯柯，陈拂晓，郭俊卿

Proceedings of 2013 3rd International Conference on Education and Education Management(EEM 2013) Volume 29

2011

铝合金与不锈钢电阻点焊接头组织与性能

邱然锋，杜宜乐，李臣阳，石红信，张柯柯

《第十六次全国焊接学术会议论文摘要集》

2011

电场作用下1.6%C-UHCS/40Cr钢超塑焊接头组织分析

张柯柯，衡中皓，邱然锋，孙敬，张占领，石红信，吴志伟，于华，张晓娇

《第十六次全国焊接学术会议论文摘要集》

研究方向

异种金属连接与界面表征

此主页由公开资料整理，尚未经学者本人认领。