刘泉声

2026

复杂地层双模TBM刀盘装机主参数设计方法研究

《人民长江》

DOI

2026

引江补汉工程输水隧洞TBM地质适应性选型研究

《武汉大学学报(工学版)》

2026

深部矿井三维地质力学信息可视化系统构建及应用

《煤炭学报》

2026

连续掘进同步拼装盾构管片结构力学行为及承载性能研究

《武汉大学学报(工学版)》

2026

基于核磁共振技术的裂隙砂岩注浆扩散特性

《中南大学学报(自然科学版)》

2026

A 3D coupled multibody dynamics (MBD)-FDEM framework with GPGPU parallelization for simulating TBM-ground interaction and orientation behavior

Tunnelling and Underground Space Technology

DOI

2026

Effect of combined microwave-liquid nitrogen on compressive mechanical and failure behaviors of granite and its potential application in TBM rock breaking

Tunnelling and Underground Space Technology

DOI

2026

Stability analysis and fracture evolution in topographical bias tunnels within layered rock masses: insights from FDEM simulation

Computers and geotechnics

DOI

2026

Application of Data Processing Methods and Optimization Algorithms Based on Micro-seismic Monitoring in Short-Term Rockburst Prediction

Rock Mechanics and Rock Engineering

DOI

2026

Unsteady diffusion characteristics of pulsed grouting considering grout-rock hydromechanical coupling effect

Computers and geotechnics

DOI

2026

Intelligent rock classification from a mesoscopic perspective: A computer vision approach based on thin section images

International Journal of Rock Mechanics And Mining Sciences

DOI

2026

A thermo-hydro-mechanical coupled dual-porosity fractal model on well pairs in geothermal reservoirs

Geoenergy Science and Engineering

DOI

2026

Investigation on the crack propagation characteristics of rock dual-borehole directional hydraulic fracturing with prefabricated cracks: Insights from the phase field simulations

Engineering Fracture Mechanics

DOI

2026

A novel fluid-particle coupling framework for microproppant migration and deposition in T-shaped fractures

International Journal of Rock Mechanics And Mining Sciences

DOI

2026

Experimental Investigation on Damage Evolution and Mechanical Properties of Coal Treated by Liquid Nitrogen-Microwave Synergy

Rock Mechanics and Rock Engineering

DOI

2026

Mechanisms of Suspended Microparticle Clogging in Constricted Channels: Insights From a Lattice Boltzmann‐Discrete Element Simulation

Water Resources Research

DOI

2026

Mechanical responses, failure behaviours and stability of soft–hard interbedded antidip slopes under various degrees of anisotropy

Engineering Computations

DOI

2026

Real-time surrounding rock characterization and dynamic prediction of tunneling parameters for TBM in traffic tunnels based on deep sequential networks and feature fusion

Transportation Geotechnics

DOI

2026

3D mesostructural modeling and DEM simulation of soil-rock mixtures using Minkowski sums

Computers and Geotechnics

DOI

2026

Investigation of the Expansion Effects on Grout Diffusion and Reinforcement in Fractured Rock Masses

Arabian Journal for Science and Engineering

DOI

2026

Diffusion behavior of PLMC slurry in complex fractured sandstone and its effect on the impermeability of grout-consolidated bodies

Tunnelling and Underground Space Technology

DOI

2026

Accurate Estimation of Tensile Failure Parameters via Theoretical–Experimental Correlation and Implications for Mine Fracture Prevention

Fatigue & Fracture of Engineering Materials & Structures

DOI

2026

Effects of ITZ on permeability characteristics of grouted-reinforced rock considering temperature and confining pressure

Journal of Building Engineering

DOI

2026

Mineral-scale thermo-mechanical degradation of granite induced by laser irradiation: Insights from nanoindentation and accurate grain-based modeling

Rock Mechanics Bulletin

DOI

2026

Can the rock mass integrity index be greater than 1? An investigation of the reason and evaluation application

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2026

Influence of weathering on the physicomechanical properties of sandstone: Multi-scale analysis

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2026

Effects of slurry and rock type on shear properties of grout-filled jointed rock: Experimental and numerical investigation

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2026

Constructing large-scale high-fidelity fracture networks based on generative AI

International Journal of Rock Mechanics and Mining Sciences

DOI

2026

Mutual prediction mechanism between disc cutter cutting forces and rock strength parameters: Experimental study and field application

Rock Mechanics Bulletin

DOI

2026

Mesh size identification for cohesive fracture model based on experimentally calibrated FPZ length and FDEM simulation

Theoretical and Applied Fracture Mechanics

DOI

2026

Tunnel boring machine jamming anticipation based on a new monitoring system for real-time perception of shield strain

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2026

Cycled Fluid Injection Limits Maximum Earthquake Size by Controlling the Cadence of Seismic Moment Release

Geophysical Research Letters

DOI

2025

国产再制造TBM在软岩隧道中的防卡机改造研究

《隧道建设(中英文)》

2025

注浆裂隙岩体力学特性影响因素试验研究

《岩石力学与工程学报》

2025

基于不良地质条件阈值评判的TBM选型方法

《人民长江》

DOI

2025

基于FDEM数值模拟的土石混合体力学特性及破坏行为研究

《工程力学》

2025

含软弱夹层复合层状试样力学行为及能量演化特性研究

《采矿与岩层控制工程学报》

DOI

2025

Mesoscopic numerical modeling of Soil-Rock mixtures: Investigation of mechanical behavior and failure mechanisms based on FDEM

Computers and geotechnics

DOI

2025

FDEM numerical study on the large deformation mechanism of layered rock mass tunnel under excavation-unloading disturbance

Tunnelling and Underground Space Technology

DOI

2025

Microparticle transport and clogging mechanisms in 3D complex rock fractures based on coupled lattice Boltzmann and discrete element method simulations

International Journal of Rock Mechanics And Mining Sciences

DOI

2025

Toward disaster management in rock engineering: Automated machine learning paradigm for predicting the uniaxial compressive strength of rock materials

Geohazard Mechanics

DOI

2025

Investigation of fracture energy rate for the combined finite-discrete element method

Computational Particle Mechanics

DOI

2025

Equivalent Nodal Intensity-Based Contact Model for 3D Finite–Discrete Element Method in Rock Fracturing Analysis

Rock Mechanics and Rock Engineering

DOI

2025

Fractal Dual-Porosity Modeling and Simulation of CO2 Sequestration and Enhanced Coalbed Methane Production in Non-producible Coal Seams

Rock Mechanics and Rock Engineering

DOI

2025

Metaheuristic multi-objective optimization-based microseismic source location approach with anisotropic P-wave velocity field

Deep Resources Engineering

DOI

2025

Grouting diffusion characteristics in rough sandstone fracture with flowing water: Insights from NMR experimental investigation

Tunnelling and Underground Space Technology

DOI

2025

Mixed-mode I/II fracture and crack propagation characteristics of granite after thermal shock cycles: An integrated DIC and CPG investigation

Engineering Fracture Mechanics

DOI

2025

A GPU-parallelized data-driven numerical manifold method with enhanced k-d tree algorithm for simulation of rock mechanical behaviors

Computers and geotechnics

DOI

2025

Revealing the impacts of fracture morphology and grouting parameter on the slurry diffusion behavior in rough rock fracture with flowing water: Insights from numerical modeling

International Journal of Rock Mechanics And Mining Sciences

DOI

2025

Monthly advance rate estimation of hard rock tunnel boring machine based on rock mass classification and data augmentation

Underground Space

DOI

2025

Estimating rock fracture characteristics based on determined mechanical properties and simulation parameters calibration methodology

Theoretical and Applied Fracture Mechanics

DOI

2025

Grouting Flow in Deep Fractured Rock: A State-of-the-Art Review of Theory and Practice

Fluid dynamics & materials processing

DOI

2025

Intelligent multi-channel classification of microseismic events upon TBM excavation

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2025

Rock breaking process by TBM disc cutters in heterogeneous granite based on a new FDEM modeling

European Journal of Environmental and Civil engineering

DOI

2025

An attention-enhanced ResNet model for classification of TBM rock chips

Tunnelling and Underground Space Technology

DOI

2025

A Novel Frictional Contact Interaction Algorithm for FDEM and Its Application in TBM Jamming

Rock Mechanics and Rock Engineering

DOI

2025

Characterization of particle size distribution of rock chips and evaluation of rock breaking efficiency of TBM based on multifractal theory: A case study

Tunnelling and Underground Space Technology

DOI

2025

Wear Analysis and Evaluation of Inserted-Tooth Disc Cutters During Shield TBM Tunneling in Soil-Rock Mixed Ground

Rock Mechanics and Rock Engineering

DOI

2025

A new cutter wear testing method for evaluating the plowing effect of ripper tooth during shield TBM tunneling in abrasive sandy ground

Results in Engineering

DOI

2025

Influence of the hard-to-soft rock layer thickness ratio on the tensile strength of Brazilian disc specimens and the stability of anti-dip slopes

Engineering Fracture Mechanics

DOI

2025

Investigating Mechanical Properties of Cemented Broken Coal Using Nanoindentation and DEM: Effects of Slurry Type and Coal Block Size

Rock Mechanics and Rock Engineering

DOI

2025

Laboratory investigation on the attenuation characteristics of stress wave energy in the jointed rock under various axial pressure conditions

Engineering Failure Analysis

DOI

2025

The Impact of Surface Morphology on the Strength and Damage Characteristics of Rock Structural Plane

Rock Mechanics and Rock Engineering

DOI

2025

AI-aided short-term decision making of rockburst damage scale in underground engineering

Underground Space

DOI

2025

A novel hybrid contact detection algorithm for 2D FDEM: Balancing efficiency and memory consumption

Engineering Analysis with Boundary Elements

DOI

2025

Mechanical and microstructural characteristics and damage constitutive model of limestone under acid corrosion

Journal of Building Engineering

DOI

2025

Assessment Method of Surface Morphology Based on 100 Shear Tests and PSO-RBF Neural Network

Rock Mechanics and Rock Engineering

DOI

2025

Evaluation of rock mass quality and its mechanical properties through digital drilling process monitoring

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2025

Data-Simulation-Driven Method to Identify the Mechanical Parameters of Rockmass in Deep-Buried Tunnel

Rock Mechanics and Rock Engineering

DOI

2025

Application of physics-data-driven method to identify the weak interlayers in underground geotechnical engineering

Tunnelling and Underground Space Technology

DOI

2025

Shear Failure Mechanism and Strength Model of Structural Planes Under the Influence of Freeze–Thaw Cycles and Shear Loading

Rock Mechanics and Rock Engineering

DOI

2025

A novel GPGPU-parallelized contact detection algorithm for 3D-FDEM: Optimizing the computational structure

Engineering Fracture Mechanics

DOI

2024

孔洞形状对层状岩石力学特性影响的FDEM数值模拟研究

《中南大学学报(自然科学版)》

2024

基于FDEM数值模拟的软岩大变形预测及新分级研究

《中国公路学报》

2024

岩石类材料直接拉伸破坏的FDEM数值模拟

《中南大学学报(自然科学版)》

2024

深部金属矿山巷道TBM掘进技术应用现状及研究进展

《有色金属(矿山部分)》

2024

基于Weibull分布的非均质隧洞围岩破裂碎胀FDEM数值模拟研究

《工程力学》

2024

基于DNN和属性数学的岩溶隧道突涌水风险预测

《中国公路学报》

2024

Investigating the impacts of reinforcement range and grouting timing on grouting reinforcement effectiveness for tunnels in fault rupture zones using a numerical manifold method

Engineering Geology

DOI

2024

Numerical Investigation on the Grouting Penetration Process of Quick-Setting Grout in Discrete Fractured Rock Mass Based on the Combined Finite–Discrete-Element Method

International Journal of Geomechanics

DOI

2024

Modelling Thermo-hydro-mechanical (THM) Effect on the Hydro-mechanical Properties of Granite in Disposal System Using an Improved Meso-structure-Based DEM Model

Rock Mechanics and Rock Engineering

DOI

2024

Fracture development around wellbore excavation: Insights from a 2D thermo-mechanical FDEM analysis

Engineering Fracture Mechanics

DOI

2024

Cross-scale mechanical softening of Marcellus shale induced by CO2-water-rock interactions using nanoindentation and accurate grain-based modeling

Underground Space

DOI

2024

Unraveling the shear behaviors of bonding interface for post-grouted sandstones considering the temperature and confining pressure effects

Journal of Materials Research and Technology

DOI

2024

Viscos-elastic-plastic solution for deep buried tunnels considering tunnel face effect and sequential installation of double linings

Computers and geotechnics

DOI

2024

Numerical Investigation of Hydro-Mechanical (HM) Effect on Meso-Failure Properties of Granite Using Improved HM Grain-Based Model

Rock Mechanics and Rock Engineering

DOI

2024

A new combined finite-discrete element method for stability analysis of soil-rock mixture slopes

Engineering Computations

DOI

2024

A FDEM study on the mechanical properties and failure behavior of soft-hard interbedded rocks considering the size effect

Engineering Fracture Mechanics

DOI

2024

Investigation of tunnel excavation numerical analysis method for the combined finite-discrete element method

Engineering Analysis with Boundary Elements

DOI

2024

Probabilistic assessment of rockburst risk in TBM-excavated tunnels with multi-source data fusion

Tunnelling and Underground Space Technology

DOI

2024

Experimental study on the influence mechanism of soil additives on scraper wear during EPB-TBM tunnelling in abrasive sandy ground

Bulletin of Engineering Geology and the Environment

DOI

2024

TBM big data preprocessing method in machine learning and its application to tunneling

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2024

TBM Tunnelling Under Adverse Geological Conditions: Case Study of a Long-Distance and Deep-Buried Water Conveyance Tunnel

U.S. Rock Mechanics/Geomechanics Symposium (ARMA)

DOI

2024

Hybrid deep learning-based identification of microseismic events in TBM tunnelling

Measurement

DOI

2024

Neural texture synthesis and style transfer of coal-rock images in coal mine heading faces using very deep convolutional networks

Tunnelling and Underground Space Technology

DOI

2024

A new type of rockbolt model in 3D FDEM and its application to tunnel excavation

Tunnelling and Underground Space Technology

DOI

2024

A TOUGH-FEMM based cryogenic THM coupled model and its application to cold-region tunnels

Engineering Analysis with Boundary Elements

DOI

2024

A coupled FDEM-CFD method for modelling heat exchange effectiveness in enhanced geothermal systems-excavation

Engineering Analysis with Boundary Elements

DOI

2024

Coal-rock interface real-time recognition based on the improved YOLO detection and bilateral segmentation network

Underground Space

DOI

2024

Mechanical properties and failure behavior of heterogeneous granite: Insights from a new Weibull-based FDEM numerical model

Engineering Analysis with Boundary Elements

DOI

2024

Scale effect of rock discontinuity considering all morphological information

Geomechanics and Geophysics for Geo-Energy and Geo-Resources

DOI

2024

Mechanical characteristics and damage model for rock-like specimen with two parallel grout-filled cracks

Theoretical and Applied Fracture Mechanics

DOI

2024

Numerical investigation of the path-dependent frost heave process in frozen rock under different freezing conditions

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2024

Quantitative Analysis on Tensile Mechanical Properties and Microscopic Characteristics of Acidified Limestone

Rock Mechanics and Rock Engineering

DOI

2024

Comparison of spatio-temporal characteristic of microseismic events in deep-buried tunnels with two excavation methods

Bulletin of Engineering Geology and the Environment

DOI

2024

Study of Grouting Reinforcement Mechanism in Fractured Rock Mass and Its Engineering Application

International Journal of Geomechanics

DOI

2024

A 3D FRACTAL MODEL COUPLED WITH TRANSPORT AND ACTION MECHANISMS TO PREDICT THE APPARENT PERMEABILITY OF SHALE MATRIX

Fractals

DOI

2024

Experimental study on mode I fracture characteristics of heated granite subjected to water and liquid nitrogen cooling treatments

Engineering Fracture Mechanics

DOI

2024

Study the anisotropic behavior of layered surrounding rock based on 3D FDEM method

Tunnelling and Underground Space Technology

DOI

2024

Influence of joint roughness on the shear performance of grouted rock mass: Numerical investigation with an improved traction-separation model

Computers and Geotechnics

DOI

2024

Cement-based grouting material development and prediction of material properties using PSO-RBF machine learning

Construction and Building Materials

DOI

2024

Coupled hydro-mechanical two-phase flow model in fractured porous medium with the combined finite-discrete element method

Engineering With Computers

DOI

2024

Rockburst prediction and prevention in a deep-buried tunnel excavated by drilling and blasting: A case study

Engineering Geology

DOI

2024

Experimental Study on the Boundary Reflection Effect of Stress Wave Propagation Based on the Newly Developed Test Apparatus

Advances in Civil Engineering

DOI

2024

Study on mechanical properties and acoustic emission characteristics of deep diorite under uniaxial compression

Heliyon

DOI

2024

Developing a memory-efficient GPGPU-parallelized contact detection algorithm for 3D engineering-scale FDEM simulations

Computers and Geotechnics

DOI

2024

Failure mechanisms and stability control principles of high geostressed deep mining structures: Investigation by FDEM and field measurements

Engineering Failure Analysis

DOI

2024

A confident learning-based support vector machine for robust ground classification in noisy label environments

Tunnelling and Underground Space Technology

DOI

2024

Energy evolution and damage deformation behavior of cemented broken coal specimen under triaxial compression condition

Energy

DOI

2024

Failure mechanism of a tunnel in a soil–rock mixture based on a new combined finite–discrete element method

European Journal of Environmental and Civil engineering

DOI

2024

Study of Cerchar abrasive parameters of monomineralic rocks and its application for evaluating cutting efficiency

International Journal of Rock Mechanics and Mining Sciences

DOI

2024

A review of test methods for uniaxial compressive strength of rocks: Theory, apparatus and data processing

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2024

An enhanced polar-based GPGPU-parallelized contact detection algorithm for 3D FDEM and its application to cracking analysis of shield tunnel segmental linings

Tunnelling and Underground Space Technology

DOI

2024

An efficient Kriging-based calibration framework for FDEM

Engineering Fracture Mechanics

DOI

2023

引汉济渭秦岭隧洞围岩变形规律与拱架受力特征研究

《岩土工程学报》

2023

隧道底板渐进破裂碎胀大变形：一种新的底鼓机制研究

《岩土力学》

2023

基于人工神经网络多模型迁移学习的隧(巷)道机械化掘进装备控制参数自主决策方法

《岩石力学与工程学报》

2023

考虑围岩孔隙特性的深部巷道注浆加固数值方法研究

《金属矿山》

2023

TBM在煤矿巷道掘进中的技术应用和研究进展

《煤炭科学技术》

2023

基于核磁共振技术的石膏粉末型3D打印试样水理特性及裂隙渗流特性初探

《中国科学:技术科学》

2023

基于Hoek-Brown强度参数的地铁隧道下穿既有管廊塌落上限分析

《应用基础与工程科学学报》

2023

高应力软岩隧道破裂碎胀米级大变形机理研究

《中国公路学报》

2023

Data-driven enhanced FDEM for simulating the rock mechanical behavior

International Journal of Mechanical Sciences

DOI

2023

Heterogeneous Frost Deformation of Partially Saturated Sandstones Due to the Freeze–Thaw Cycle

Rock Mechanics and Rock Engineering

DOI

2023

Tensile strength degradations of mineral grain interfaces (MGIs) of granite after thermo-hydro-mechanical (THM) treatment

International Journal of Rock Mechanics And Mining Sciences

DOI

2023

Effect of Microstructure on Changes to the Pore Structure and Mechanical Properties of Limestone under Acidic Groundwater Corrosion

International Journal of Geomechanics

DOI

2023

Crack initiation stress of thermally damaged rock under uniaxial compression

Engineering Geology

DOI

2023

The Calibration of Microscopic Parameters for the 3D Finite-Discrete Element Method

Rock Mechanics and Rock Engineering

DOI

2023

A coupled cryogenic thermo-hydro-mechanical model for frozen medium: Theory and implementation in FDEM

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2023

Failure mechanism and deformation prediction of soft rock tunnels based on a combined finite–discrete element numerical method

Computers and Geotechnics

DOI

2023

Dynamic stability analysis of jointed rock slopes using the combined finite-discrete element method (FDEM)

Computers and Geotechnics

DOI

2023

Robust model for tunnel squeezing using Bayesian optimized classifiers with partially missing database

Underground Space

DOI

2023

Experimental study on the influences of cutter geometry and material on scraper wear during shield TBM tunnelling in abrasive sandy ground

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2023

Microseismic Monitoring and Rockburst Characteristics in a Deep-Buried Tunnel Excavated by TBM

Rock Mechanics and Rock Engineering

DOI

2023

Microseismic characteristic and development mechanism of fault-slip rockburst in a deep-buried TBM excavated tunnel: A case study

Tunnelling and Underground Space Technology

DOI

2023

Fast perception of rock mass strength and integrity in TBM tunnelling using in-situ penetration test

Tunnelling and Underground Space Technology

DOI

2023

QPSO-ILF-ANN-based optimization of TBM control parameters considering tunneling energy efficiency

Frontiers of Structural and Civil Engineering

DOI

2023

Effects of seepage pressure on the mechanical behaviors and microstructure of sandstone

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2023

A Novel Mixed-Mode Power Exponent Cohesive Zone Model for FDEM and Its Application to Tunnel Excavation in the Layered Rock Mass

Rock Mechanics and Rock Engineering

DOI

2023

An efficient 3D cell-based discrete fracture-matrix flow model for digitally captured fracture networks

International Journal of Coal Science & Technology

DOI

2023

Anisotropic shearing mechanism of Kangding slate: Experimental investigation and numerical analysis

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2023

Flow simulation in 3D fractured porous medium using a generalized pipe-based cell-centered finite volume model with local grid refinement

Geomechanics for Energy and the Environment

DOI

2023

Experimental Investigation on the Grouting Diffusion Characteristics and Relative Filling Degree of Chemical Slurry in Fractured Porous Sandstone

Rock Mechanics and Rock Engineering

DOI

2023

Experimental investigation of strength repairing effects of chemical grouting on fractured porous sandstone under different temperature conditions

International Journal of Rock Mechanics and Mining Sciences

DOI

2023

Experimental Study on the Grouting Diffusion Process in Fractured Sandstone with Flowing Water Based on the Low-Field Nuclear Magnetic Resonance Technique

Rock Mechanics and Rock Engineering

DOI

2023

Experimental and numerical investigations on cross rock pillar method for super large cross-sectional tunnel excavation

Bulletin of Engineering Geology and the Environment

DOI

2023

Numerical investigation of geostress influence on the grouting reinforcement effectiveness of tunnel surrounding rock mass in fault fracture zones

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2023

Comparison and Selection of Index for Macro-indentation Test of Brittle Rock

Rock Mechanics and Rock Engineering

DOI

2023

Estimation of rock mechanical properties by macro indentation test with a conical indenter

Bulletin of Engineering Geology and the Environment

DOI

2023

A new phenomenological anisotropic tensile failure criterion and its application in FDEM simulations

Engineering Fracture Mechanics

DOI

2023

Numerical simulation of the grouting penetration process by developing a temperature‐dependent spatial–temporal rheological model

Structural Concrete

DOI

2023

Stability analysis of reservoir slopes under fluctuating water levels using the combined finite-discrete element method

Acta Geotechnica

DOI

2023

Experimental investigation on microstructure and surface morphology deterioration of limestone exposed on acidic environment

Construction and Building Materials

DOI

2023

Development and application of a novel probabilistic back-analysis framework for geotechnical parameters in shield tunneling based on the surrogate model and Bayesian theory

Acta Geotechnica

DOI

2023

Modeling Geothermal Heat Extraction-Induced Potential Fault Activation by Developing an FDEM-Based THM Coupling Scheme

Rock Mechanics and Rock Engineering

DOI

2023

Acoustic Emission Source Localization in Heterogeneous Rocks with Random Inclusions Using a PRM-Based Wave Velocity Model

Rock Mechanics and Rock Engineering

DOI

2023

A multi-channel decoupled deep neural network for tunnel boring machine torque and thrust prediction

Tunnelling and Underground Space Technology

DOI

2023

An updated Lagrangian framework with quadratic element formulations for FDEM

Computers and Geotechnics

DOI

2023

A new floor heave mechanism considering the influences of the in-situ stress lateral coefficient and rock tensile strength

European Journal of Environmental and Civil engineering

DOI

2022

莲花隧道软弱围岩大变形预测方法适用性评价研究

《工程地质学报》

2022

水平层状软弱围岩破裂碎胀大变形机制有限元-离散元耦合数值模拟研究

《岩土力学》

2022

裂隙岩体注浆理论研究进展及展望

《煤炭科学技术》

2022

面向地下工程岩爆灾害智能化预警：基于模糊理论改进的多属性群决策模型

《应用基础与工程科学学报》

2022

Development and Application of a Novel Hybrid CEEMDAN-LWT Denoising Approach in Microseismic Monitoring

Pure and Applied Geophysics

DOI

2022

An efficient and robust GPGPU-parallelized contact algorithm for the combined finite-discrete element method

Computer Methods in Applied Mechanics and Engineering

DOI

2022

Numerical Investigation of Rock Mechanical Characteristics in Post-peak Curve Based on Combined Finite-discrete Element Method

Journal of Engineering Science and Technology Review

DOI

2022

A new evaluation method to quantify the wear failure of irregular cutting tool during shield TBM tunneling in abrasive sandy ground

Engineering Failure Analysis

DOI

2022

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter’s Cutting Force in Complex Ground

Geotechnical Testing Journal

DOI

2022

Numerical Study of the Effect of Grout Material Properties on Ground Deformation during Shallow TBM Tunneling

KSCE Journal of Civil Engineering

DOI

2022

Development and in-situ application of a real-time cutting tool forces monitoring system in TBM tunnelling

Tunnelling and Underground Space Technology

DOI

2022

Mechanical response of inclined TBM tunnel due to drainage settlement of deep sandstone aquifer

Tunnelling and Underground Space Technology

DOI

2022

Influence analysis on the shear behaviour and failure mode of grout-filled jointed rock using 3D DEM coupled with the cohesive zone model

Computers and Geotechnics

DOI

2022

Key technology for the construction and inspection of long-distance underwater tunnel for 1000 kV gas-insulated transmission line

Bulletin of Engineering Geology and the Environment

DOI

2022

Study on mesoscopic failure mechanism of grout-infilled sandstone under uniaxial compression using an improved AE localization technique

International Journal of Rock Mechanics and Mining Sciences

DOI

2022

FDEM numerical study on the mechanical characteristics and failure behavior of heterogeneous rock based on the Weibull distribution of mechanical parameters

Computers and Geotechnics

DOI

2022

Rockburst inoculation process at different structural planes and microseismic warning technology: a case study

Bulletin of Engineering Geology and the Environment

DOI

2022

A novel joint element parameter calibration procedure for the combined finite-discrete element method

Engineering Fracture Mechanics

DOI

2022

Frost Crack Propagation and Interaction in Fissured Rocks Subjected to Freeze–thaw Cycles: Experimental and Numerical Studies

Rock Mechanics and Rock Engineering

DOI

2022

A Method for Accurate Measuring the Tensile Strength of Single Rock Grain Interface

Rock Mechanics and Rock Engineering

DOI

2022

Evaluating the pore characteristics of granite in disposal system under thermo-hydro-mechanical (T-H-M) coupling

International Journal of Rock Mechanics and Mining Sciences

DOI

2022

A novel low-temperature thermo-mechanical coupling model for frost cracking simulation using the finite-discrete element method

Computers and Geotechnics

DOI

2022

Point and interval estimation of rock mass boreability for tunnel boring machine using an improved attribute-weighted deep belief network

Acta Geotechnica

DOI

2022

A 2D FDEM-based THM coupling scheme for modeling deformation and fracturing of the rock mass under THM effects

Computers and Geotechnics

DOI

2022

Direct Tensile Test and FDEM Numerical Study on Anisotropic Tensile Strength of Kangding Slate

Rock Mechanics and Rock Engineering

DOI

2022

Investigation on artificial boundary problem in the combined finite-discrete element method (FDEM)

Computers and Geotechnics

DOI

2022

An improved numerical manifold method for investigating the mechanism of tunnel supports to prevent large squeezing deformation hazards in deep tunnels

Computers and Geotechnics

DOI

2022

Progressive fracture and swelling of anisotropic rock masses around deep tunnels: a new floor heave mechanical mechanism

Arabian Journal of Geosciences

DOI

2022

Determining Young's modulus of granite using accurate grain-based modeling with microscale rock mechanical experiments

International Journal of Rock Mechanics and Mining Sciences

DOI

2022

A New Analysis Method for the Influencing Factors of Surrounding Rock Stability and its Application

U.S. Rock Mechanics/Geomechanics Symposium (ARMA)

DOI

2022

Quantitative relationships between the mineral composition and macro mechanical behaviors of granite under different temperatures: Insights from mesostructure-based DEM investigations

Computers and Geotechnics

DOI

2022

A self-dissolved grouting reinforcement method for water-rich soft rock roadway

Bulletin of Engineering Geology and the Environment

DOI

2022

Investigate the Mode I Fracture Characteristics of Granite After Heating/-LN2 Cooling Treatments

Rock Mechanics and Rock Engineering

DOI

2022

The role of discontinuities in rock slope stability: Insights from a combined finite-discrete element simulation

Computers and Geotechnics

DOI

2022

A Numerical Study of Wave Propagation and Cracking Processes in Rock-Like Material under Seismic Loading Based on the Bonded-Particle Model Approach

Engineering

DOI

2022

A real-time prediction method for tunnel boring machine cutter-head torque using bidirectional long short-term memory networks optimized by multi-algorithm

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2022

Real-time hard-rock tunnel prediction model for rock mass classification using CatBoost integrated with Sequential Model-Based Optimization

Tunnelling and Underground Space Technology

DOI

2022

Real-time characterization of the grouting diffusion process in fractured sandstone based on the low-field nuclear magnetic resonance technique

International Journal of Rock Mechanics and Mining Sciences

DOI

2022

Influence of the oval hole on rock mechanical mechanism under uniaxial and biaxial compression: insights from the combined finite-discrete element method

European Journal of Environmental and Civil engineering

DOI

2022

Evolution of the Unfrozen Water Content for Partially-Saturated Sandstones and the Critical Degree of Saturation

Rock Mechanics and Rock Engineering

DOI

2022

Extremely large deformation of tunnel induced by rock mass fracture using GPGPU parallel FDEM

International Journal for Numerical and Analytical Methods in Geomechanics

DOI

2022

Compressive strength prediction of sprayed concrete lining in tunnel engineering using hybrid machine learning techniques

Underground Space

DOI

2022

An elasto-plastic and viscoplastic damage constitutive model for dilatancy and fracturing behavior of soft rock squeezing deformation

Journal of Mountain Science

DOI

2021

TBM净掘进速率预测模型及多指标评价方法研究

《煤炭工程》

2021

基于边界跟踪和神经网络的煤岩界面识别方法研究

《煤炭工程》

2021

基于塔式池化架构的采掘工作面煤岩图像识别方法

《煤炭学报》

DOI

2021

Real-time rock mass condition prediction with TBM tunneling big data using a novel rock–machine mutual feedback perception method

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2021

通过波速的连续实时监测研究单轴压缩时脆性岩石的细观损伤过程和损伤机制（英文）

Journal of Central South University

2021

Numerical study on P-wave propagation across the jointed rock masses by the combined finite-discrete element method

Computers and Geotechnics

DOI

2021

The influence of stress anisotropy and stress shadow on frost cracking in rock

Computers and Geotechnics

DOI

2021

Perception model of surrounding rock geological conditions based on TBM operational big data and combined unsupervised-supervised learning

Tunnelling and Underground Space Technology

DOI

2021

An experimental study on cutting tool hardness optimization for shield TBMs during dense fine silty sand ground tunneling

Bulletin of Engineering Geology and the Environment

DOI

2021

Numerical study and field performance of rockbolt support schemes in TBM-excavated coal mine roadways: A case study

Tunnelling and Underground Space Technology

DOI

2021

Comparison and correlation between the laboratory, semi-theoretical and empirical methods in predicting the field excavation performance of tunnel boring machine (TBM)

Acta Geotechnica

DOI

2021

Experimental Study on Pipe Strength and Field Performance of Pipe Jacking TBM in Deep-Buried Coal Mines

International Journal of Civil Engineering

DOI

2021

Evaluation of rock muck using image analysis and its application in the TBM tunneling

Tunnelling and Underground Space Technology

DOI

2021

Control and prevention of gas explosion in soft ground tunneling using slurry shield TBM

Tunnelling and Underground Space Technology

DOI

2021

Analysis on the excavation management system of slurry shield TBM in permeable sandy ground

Tunnelling and Underground Space Technology

DOI

2021

Simulating the entire progressive failure process of rock slopes using the combined finite-discrete element method

Computers and Geotechnics

DOI

2021

FDEM numerical modeling of failure mechanisms of anisotropic rock masses around deep tunnels

Computers and Geotechnics

DOI

2021

An Improved Wave Velocity Model for Acoustic Emission Source Localization in Heterogeneous Rock Materials with Unknown Inclusions

Journal of Engineering Mechanics

DOI

2021

Development and application of an in-situ indentation testing system for the prediction of tunnel boring machine performance

International Journal of Rock Mechanics and Mining Sciences

DOI

2021

Study of contact pressure distribution between cutter and rock surface using the discrete element method

International Journal of Rock Mechanics and Mining Sciences

DOI

2021

A new hysteretic damping model and application for the combined finite-discrete element method (FDEM)

Engineering Analysis with Boundary Elements

DOI

2021

Real-time prediction of rockburst intensity using an integrated CNN-Adam-BO algorithm based on microseismic data and its engineering application

Tunnelling and Underground Space Technology

DOI

2021

Thermo-mechanical FDEM model for thermal cracking of rock and granular materials

Powder Technology

DOI

2021

A novel tree-based algorithm for real-time prediction of rockburst risk using field microseismic monitoring

Environmental Earth Sciences

DOI

2021

Simulation of the nonplanar three-dimensional thermal cracking using the finite element-meshfree method

Applied Mathematical Modelling

DOI

2021

Evaluating the Microstructure Evolution Behaviors of Saturated Sandstone Using NMR Testing Under Uniaxial Short-Term and Creep Compression

Rock Mechanics and Rock Engineering

DOI

2021

Investigation on fundamental properties and chemical characterization of water-soluble epoxy resin modified cement grout

Construction and Building Materials

DOI

2021

A novel GPGPU-parallelized contact detection algorithm for combined finite-discrete element method

International Journal of Rock Mechanics and Mining Sciences

DOI

2021

Failure criterion for soft rocks considering intermediate principal stress

International Journal of Mining Science and Technology

DOI

2021

Sensitivity analysis of fracture energies for the combined finite-discrete element method (FDEM)

Engineering Fracture Mechanics

DOI

2021

Evolutions of the unfrozen water content of saturated sandstones during freezing process and the freeze-induced damage characteristics

International Journal of Rock Mechanics and Mining Sciences

DOI

2021

Correlation Analysis of Machine Performance Parameters and Rock Mass Properties during Tunnel Boring Machine Excavation Process: A Case Study in Yin-song Headrace Tunnel, China

Journal of Testing and Evaluation

DOI

2021

Effects of Rock Specimen Size on Mechanical Properties in Laboratory Testing

Journal of Geotechnical and Geoenvironmental Engineering

DOI

2021

Experimental investigation of rock strength using indentation test and point load test

International Journal of Rock Mechanics and Mining Sciences

DOI

2021

Micro-failure process and failure mechanism of brittle rock under uniaxial compression using continuous real-time wave velocity measurement

Journal of Central South University

DOI

2021

Analytical Solution for Lined Circular Tunnels in Deep Viscoelastic Burgers Rock Considering the Longitudinal Discontinuous Excavation and Sequential Installation of Liners

Journal of Engineering Mechanics

DOI

2021

Strength of Stacking Technique of Ensemble Learning in Rockburst Prediction with Imbalanced Data: Comparison of Eight Single and Ensemble Models

Natural Resources Research

DOI

2021

Micro-mechanism of brittle creep in saturated sandstone and its mechanical behavior after creep damage

International Journal of Rock Mechanics and Mining Sciences

DOI

2021

Numerical Investigation of Coupled Effects of Temperature and Confining Pressure on Rock Mechanical Properties in Fractured Rock Mass Using Thermal-Stress-Aperture Coupled Model

International Journal of Geomechanics

DOI

2020

岩体裂隙网络注浆模拟试验系统研制及应用

《岩石力学与工程学报》

DOI

2020

基于数字图像处理的岩石数值模拟研究进展

《岩石力学与工程学报》

2020

基于组合赋权和属性区间识别理论的岩爆烈度分级预测模型

《煤炭学报》

DOI

2020

单轴压缩条件下硅质粉砂岩应力阈值研究

《工程地质学报》

DOI

2020

TRT7000地质预报系统在输水隧洞工程中的应用

《中国农村水利水电》

2020

基于FEMM-Fracflow研究缝洞型油藏中裂缝扩展问题

《地质力学学报》

2020

支持向量回归算法在地应力场反演中的应用

《岩土力学》

DOI

2020

Frost Deformation and a Quasi-Elastic-Plastic-Creep Constitutive Model for Isotropic Freezing Rock

International Journal of Geomechanics

DOI

2020

Investigation of the Anisotropic Characteristics of Layered Rocks under Uniaxial Compression Based on the 3D Printing Technology and the Combined Finite‐Discrete Element Method

Advances in Materials Science and Engineering

DOI

2020

Prediction model of rock mass class using classification and regression tree integrated AdaBoost algorithm based on TBM driving data

Tunnelling and Underground Space Technology

DOI

2020

Microseismic Monitoring to Characterize Structure-Type Rockbursts: A Case Study of a TBM-Excavated Tunnel

Rock Mechanics and Rock Engineering

DOI

2020

Acquisition of normal contact stiffness and its influence on rock crack propagation for the combined finite-discrete element method (FDEM)

Engineering Fracture Mechanics

DOI

2020

Laboratory Study on Diffusion and Migration of Grout in Rock Mass Fracture Network

International Journal of Geomechanics

DOI

2020

Corrigendum to ‘Debris characteristics and scattering pattern analysis of reinforced concrete slabs subjected to internal blast loads–a numerical study’

International Journal of Impact Engineering

DOI

2020

Identifying Accurate Crack Initiation and Propagation Thresholds in Siliceous Siltstone and Limestone

Rock Mechanics and Rock Engineering

DOI

2020

Analysis of Damage and Permeability Evolution for Mudstone Material under Coupled Stress-Seepage

Materials

DOI

2020

A numerical study of the influence of cyclic grouting and consolidation using TOUGH2

Bulletin of Engineering Geology and the Environment

DOI

2020

Investigation on relationship of the burial depth and mechanical properties for sedimentary rock

Arabian Journal of Geosciences

DOI

2020

Numerical analysis of material modeling rock reinforcement in 2D FDEM and parameter study

Computers and Geotechnics

DOI

2020

Experimental study on the influence of height and dip angle of asperity on the mechanical properties of rock joints

Bulletin of Engineering Geology and the Environment

DOI

2020

Time-dependent crack development processes around underground excavations

Tunnelling and Underground Space Technology

DOI

2020

Simulating three dimensional thermal cracking with TOUGH-FEMM

Computers and Geotechnics

DOI

2020

Deterioration of dynamic mechanical properties of granite due to freeze-thaw weathering: Considering the effects of moisture conditions

Cold Regions Science and Technology

DOI

2020

Investigation of thermal-induced damage in fractured rock mass by coupled FEM-DEM method

Computational Geosciences

DOI

2020

A Modified Bursting Energy Index for Evaluating Coal Burst Proneness and Its Application in Ordos Coalfield, China

Energies

DOI

2020

Analytical Solutions for Deep-Buried Lined Tunnels Considering Longitudinal Discontinuous Excavation in Rheological Rock Mass

Journal of Engineering Mechanics

DOI

2020

Study of microstructure effect on the nonlinear mechanical behavior and failure process of rock using an image-based-FDEM model

Computers and Geotechnics

DOI

2020

Analytical solutions for the circular stress transducer embedded in rheological rock mass

Applied Mathematical Modelling

DOI

2020

Dynamic Mechanical Properties of Dry and Water-Saturated Siltstones Under Sub-Zero Temperatures

Rock Mechanics and Rock Engineering

DOI

2020

Grout penetration process simulation and grouting parameters analysis in fractured rock mass using numerical manifold method

Engineering Analysis with Boundary Elements

DOI

2019

TBM掘进中滚刀受力实时监测方法研究

《隧道建设(中英文)》

2019

TBM掘进速度预测模型研究

《河南科学》

2019

TBM护盾-围岩相互作用荷载识别方法

《岩土力学》

DOI

2019

基于能量跟踪法研究岩石破碎对滚石运动轨迹的影响

《岩土力学》

DOI

2019

岩体低温力学特性与多场耦合理论

2019

Coupled analytical solutions for deep-buried circular lined tunnels considering tunnel face advancement and soft rock rheology effects

Tunnelling and Underground Space Technology

DOI

2019

A New Way to Replicate the Highly Stressed Soft Rock: 3D Printing Exploration

Rock Mechanics and Rock Engineering

DOI

2019

Full-scale linear cutting tests to check and modify a widely used semi-theoretical model for disc cutter cutting force prediction

Acta Geotechnica

DOI

2019

Closure to “Freezing Strain Model for Estimating the Unfrozen Water Content of Saturated Rock under Low Temperature” by Shibing Huang, Quansheng Liu, Yanzhang Liu, Zuyang Ye, and Aiping Cheng

International Journal of Geomechanics

DOI

2019

A numerical investigation of element size and loading/unloading rate for intact rock in laboratory-scale and field-scale based on the combined finite-discrete element method

Engineering Fracture Mechanics

DOI

2019

Prediction and analysis of replaceable scraper wear of slurry shield TBM in dense sandy ground: A case study of Sutong GIL Yangtze River Crossing Cable Tunnel

Tunnelling and Underground Space Technology

DOI

2019

Numerical study of the effect of confining pressure on the rock breakage efficiency and fragment size distribution of a TBM cutter using a coupled FEM-DEM method

Tunnelling and Underground Space Technology

DOI

2019

Inverse Analysis Approach to Identify the Loads on the External TBM Shield Surface and Its Application

Rock Mechanics and Rock Engineering

DOI

2019

Full-Scale Linear Cutting Tests to Propose Some Empirical Formulas for TBM Disc Cutter Performance Prediction

Rock Mechanics and Rock Engineering

DOI

2019

New Algorithm for Simulating Grout Diffusion and Migration in Fractured Rock Masses

International Journal of Geomechanics

DOI

2019

Parallelized combined finite‐discrete element (FDEM) procedure using multi‐GPU with CUDA

International Journal for Numerical and Analytical Methods in Geomechanics

DOI

2019

Influence of heating/cooling cycles on the micro/macrocracking characteristics of Rucheng granite under unconfined compression

Bulletin of Engineering Geology and the Environment

DOI

2019

Coupled hydro-mechanical analysis for grout penetration in fractured rocks using the finite-discrete element method

International Journal of Rock Mechanics and Mining Sciences

DOI

2019

Acoustic emission characteristics of pre-cracked specimens under biaxial compression

Journal of Geophysics and Engineering

DOI

2019

Thermal cracking simulation of functionally graded materials using the combined finite–discrete element method

Computational Particle Mechanics

DOI

2019

Simulation of thermal cracking in anisotropic shale formations using the combined finite-discrete element method

Computers and Geotechnics

DOI

2019

Influence of the softening stress path on crack development around underground excavations: Insights from 2D-FDEM modelling

Computers and Geotechnics

DOI

2019

A Novel in Situ Stress Monitoring Technique for Fracture Rock Mass and Its Application in Deep Coal Mines

Applied Sciences

DOI

2019

Energy dissipation and dynamic fragmentation of dry and water-saturated siltstones under sub-zero temperatures

Engineering Fracture Mechanics

DOI

2019

Numerical Simulation of Cracking Process in Rock Mass Under the Coupled Thermo-Mechanical Condition

International Journal of Computational Methods

DOI

2019

Numerical Analysis of Degradation Characteristics for Heterogeneous Rock under Coupled Thermomechanical Conditions

International Journal of Geomechanics

DOI

2019

Investigate the influence of the in-situ stress conditions on the grout penetration process in fractured rocks using the combined finite-discrete element method

Engineering Analysis with Boundary Elements

DOI

2019

Debris characteristics and scattering pattern analysis of reinforced concrete slabs subjected to internal blast loads–a numerical study

International Journal of Impact Engineering

DOI

2019

Stress redistribution and formation of the pressure arch above underground excavation in rock mass

European Journal of Environmental and Civil engineering

DOI

2019

Numerical manifold method for thermal–hydraulic coupling in fractured enhance geothermal system

Engineering Analysis with Boundary Elements

DOI

2018

全断面隧道掘进机护盾受力监测及卡机预警

《岩土力学》

2018

非接触式围岩内部位移量测系统的试验研究

《岩石力学与工程学报》

2018

灰岩隧道掘进机隧道点荷载试验评价岩石强度方法的研究与探讨

《岩土力学》

2018

刮刀磨损实时监测系统研发及室内验证试验研究

《隧道建设(中英文)》

2018

一种测量岩石压缩裂纹扩展过程声波波速的连续测量方法

《工程地质学报》

2018

基于零厚度黏聚力单元的水力压裂裂隙空间分布影响分析

《煤炭学报》

2018

深部软岩地应力测量的FBG六向压力传感器研制及性能测试

《煤矿安全》

2018

砂岩单轴压缩破裂过程声发射特性颗粒流分析

《矿业研究与开发》

2018

现场岩体三轴流变试验设备研制

《岩土力学》

2018

Investigation on disc cutter behaviors in cutting rocks of different strengths and reverse estimation of rock strengths from experimental cutting forces

European Journal of Environmental and Civil engineering

DOI

2018

Comparison between experimental and semi-theoretical disc cutter cutting forces: implications for frame stiffness of the linear cutting machine

Arabian Journal of Geosciences

DOI

2018

Geothermal-Related Thermo-Elastic Fracture Analysis by Numerical Manifold Method

Energies

DOI

2018

Experimental study on rock indentation using infrared thermography and acoustic emission techniques

Journal of Geophysics and Engineering

DOI

2018

Analysis of disc cutter damage and consumption of TBM1 section on water conveyance tunnel at Lanzhou water source construction engineering

Tunnelling and Underground Space Technology

DOI

2018

Investigation of the excavation damaged zone around deep TBM tunnel using a Voronoi-element based explicit numerical manifold method

International Journal of Rock Mechanics and Mining Sciences

DOI

2018

Full-scale linear cutting test in Chongqing Sandstone and the comparison with field TBM excavation performance

Acta Geotechnica

DOI

2018

Full-scale linear cutting tests in Chongqing Sandstone to study the influence of confining stress on rock cutting efficiency by TBM disc cutter

Tunnelling and Underground Space Technology

DOI

2018

Full-Scale Linear Cutting Tests in Chongqing Sandstone to Study the Influence of Confining Stress on Rock Cutting Forces by TBM Disc Cutter

Rock Mechanics and Rock Engineering

DOI

2018

Simulation of coupled hydro-mechanical interactions during grouting process in fractured media based on the combined finite-discrete element method

Tunnelling and Underground Space Technology

DOI

2018

Modelling Hydraulic Fracturing with a Point-Based Approximation for the Maximum Principal Stress Criterion

Rock Mechanics and Rock Engineering

DOI

2018

Failure Behavior for Rocklike Material with Cross Crack under Biaxial Compression

Journal of Materials in Civil Engineering

DOI

2018

Evaluating Damage and Microcracking Behavior of Granite Using NMR Testing under Different Levels of Unconfined Compression

International Journal of Geomechanics

DOI

2018

A Voronoi element based-numerical manifold method (VE-NMM) for investigating micro/macro-mechanical properties of intact rocks

Engineering Fracture Mechanics

DOI

2018

Numerical modeling of acoustic emission during rock failure process using a Voronoi element based – explicit numerical manifold method

Tunnelling and Underground Space Technology

DOI

2018

Modified contact model with rock joint constitutive in numerical manifold method

Engineering Analysis with Boundary Elements

DOI

2018

Updates to Grasselli’s Peak Shear Strength Model

Rock Mechanics and Rock Engineering

DOI

2018

Improved compound support system for coal mine tunnels in densely faulted zones: A case study of China's Huainan coal field

Engineering Geology

DOI

2018

Simulate intersecting 3D hydraulic cracks using a hybrid “FE-Meshfree” method

Engineering Analysis with Boundary Elements

DOI

2018

Full-Scale Rotary Cutting Test to Study the Influence of Disc Cutter Installment Radius on Rock Cutting Forces

Rock Mechanics and Rock Engineering

DOI

2018

Microcracking Mechanism Analysis of Rock Failure in Diametral Compression Tests

Journal of Materials in Civil Engineering

DOI

2018

Experimental study on mechanical properties of fractured rock mass under different anchoring modes

European Journal of Environmental and Civil engineering

DOI

2018

Modeling Simultaneous Multiple Fracturing Using the Combined Finite-Discrete Element Method

Geofluids

DOI

2017

TBM掘进刀具磨损实时监测技术及刀盘振动监测分析

《隧道建设(中英文)》

2017

基于Griffith强度理论的岩石裂纹起裂经验预测方法研究

《岩石力学与工程学报》

2017

引大济湟工程TBM挤压大变形卡机计算分析与综合防控

《岩土力学》

2017

泥质软岩隧道穿越富水断层带初期支护变形侵限机理及处治对策

《现代隧道技术》

DOI

2017

特大断面浅埋暗挖隧道十字岩柱开挖技术模型试验研究

《岩土力学》

2017

唐山市岩溶地面塌陷稳定性评价的Logistic回归模型

《岩土力学》

2017

楔刀作用下软硬互层岩体贯入破坏试验研究

《岩土力学》

2017

地下水封油库地质条件适宜性标准与应用研究

《地质论评》

2017

Physical and numerical studies of rock fragmentation subject to wedge cutter indentation in the mixed ground

Tunnelling and Underground Space Technology

DOI

2017

New peak shear strength model for cement filled rock joints

Engineering Geology

DOI

2017

Freezing Strain Model for Estimating the Unfrozen Water Content of Saturated Rock under Low Temperature

International Journal of Geomechanics

DOI

2017

Application and prospect of hard rock TBM for deep roadway construction in coal mines

Tunnelling and Underground Space Technology

DOI

2017

Study on the Influence of Different Control Modes on TBM Disc Cutter Performance by Rotary Cutting Tests

Rock Mechanics and Rock Engineering

DOI

2017

Investigation of the Rock Fragmentation Process by a Single TBM Cutter Using a Voronoi Element-Based Numerical Manifold Method

Rock Mechanics and Rock Engineering

DOI

2017

Mechanism and forecasting model for shield jamming during TBM tunnelling through deep soft ground

European Journal of Environmental and Civil engineering

DOI

2017

A case study of TBM performance prediction using a Chinese rock mass classification system – Hydropower Classification (HC) method

Tunnelling and Underground Space Technology

DOI

2017

A Wear Rule and Cutter Life Prediction Model of a 20-in. TBM Cutter for Granite: A Case Study of a Water Conveyance Tunnel in China

Rock Mechanics and Rock Engineering

DOI

2017

Experimental Investigation of the Peak Shear Strength Criterion Based on Three-Dimensional Surface Description

Rock Mechanics and Rock Engineering

DOI

2017

Improved Nonlinear Strength Criterion for Jointed Rock Masses Subject to Complex Stress States

International Journal of Geomechanics

DOI

2017

Case study: using the point load test to estimate rock strength of tunnels constructed by a tunnel boring machine

Bulletin of Engineering Geology and the Environment

DOI

2017

Micro/macro physical and mechanical variation of red sandstone subjected to cyclic heating and cooling: an experimental study

Bulletin of Engineering Geology and the Environment

DOI

2017

Modelling transient heat conduction of granular materials by numerical manifold method

Engineering Analysis with Boundary Elements

DOI

2017

Rheological Characteristics of Cement Grout and its Effect on Mechanical Properties of a Rock Fracture

Rock Mechanics and Rock Engineering

DOI

2017

A new energy index for evaluating the tendency of rockburst and its engineering application

Engineering Geology

DOI

2017

Hydraulic fracturing modeling using the enriched numerical manifold method

Applied Mathematical Modelling

DOI

2017

Updates to JRC-JCS model for estimating the peak shear strength of rock joints based on quantified surface description

Engineering Geology

DOI

2017

Stability Analysis and Failure Forecasting of Deep-Buried Underground Caverns Based on Microseismic Monitoring

Arabian Journal for Science and Engineering

DOI

2017

Mechanism of Cracking in Dams Using a Hybrid FE-Meshfree Method

International Journal of Geomechanics

DOI

2017

Creep crack analysis of viscoelastic material by numerical manifold method

Engineering Analysis with Boundary Elements

DOI

2017

Prediction of the Peak Shear Strength of Sandstone and Mudstone Joints Infilled with High Water–Cement Ratio Grouts

Rock Mechanics and Rock Engineering

DOI

2017

Four-Node Quadrilateral Element with Continuous Nodal Stress for Geometrical Nonlinear Analysis

International Journal of Computational Methods

DOI

2017

Experimental Study on the Dilatancy and Fracturing Behavior of Soft Rock Under Unloading Conditions

International Journal of Civil Engineering

DOI

2016

含裂隙泥岩注浆前后力学特性试验研究

《采矿与安全工程学报》

2016

硬岩隧道掘进机性能预测模型研究进展

《岩石力学与工程学报》

2016

复杂应力条件下裂隙网络扩展机制试验研究

《岩石力学与工程学报》

2016

常截面滚刀贯入试验中岩石破坏行为分析

《岩石力学与工程学报》

2016

基于变孔隙率的多孔介质中悬浮颗粒沉积渗透率衰减模型研究

《岩石力学与工程学报》

2016

低温饱和岩石未冻水含量与冻胀变形模型研究

《岩石力学与工程学报》

2016

TBM滚刀贯入过程中泥岩破坏特征试验研究

《岩土力学》

2016

砂质泥岩三轴卸荷蠕变试验研究

《岩石力学与工程学报》

2016

评价岩石脆性指标对滚刀破岩效率的影响

《岩石力学与工程学报》

2016

深部裂隙岩体锚固机制研究进展与思考

《岩石力学与工程学报》

2016

裂隙冻胀压力及对岩体造成的劣化机制初步研究

《岩土力学》

2016

后祠改(扩)建隧道施工方案优化分析

《武汉大学学报(工学版)》

DOI

2016

Three-dimensional fracture propagation with numerical manifold method

Engineering Analysis with Boundary Elements

DOI

2016

Improved Strength Criterion and Numerical Manifold Method for Fracture Initiation and Propagation

International Journal of Geomechanics

DOI

2016

Tunnel boring machines (TBMs) in difficult grounds

Tunnelling and Underground Space Technology

DOI

2016

Application and development of hard rock TBM and its prospect in China

Tunnelling and Underground Space Technology

DOI

2016

A partition-of-unity based ‘FE-Meshfree’ hexahedral element with continuous nodal stress

Computers & Structures

DOI

2016

Analytical investigation for stress measurement with the rheological stress recovery method in deep soft rock

International Journal of Mining Science and Technology

DOI

2016

Micro-mechanical modeling of the macro-mechanical response and fracture behavior of rock using the numerical manifold method

Engineering Geology

DOI

2016

Experimental Investigation on the Mechanical Behavior of a New Three-Dimensional Pressure Transducer

Arabian Journal for Science and Engineering

DOI

2016

Combined freeze-sealing and New Tubular Roof construction methods for seaside urban tunnel in soft ground

Tunnelling and Underground Space Technology

DOI

2016

An improved numerical manifold method incorporating hybrid crack element for crack propagation simulation

International Journal of Fracture

DOI

2016

Fracture Propagation Characteristic and Micromechanism of Rock-Like Specimens under Uniaxial and Biaxial Compression

Shock and Vibration

DOI

2016

Analytical Investigation for In Situ Stress Measurement with Rheological Stress Recovery Method and Its Application

Mathematical Problems in Engineering

DOI

2015

TBM围岩挤压大变形特性分析与等级划分

《采矿与安全工程学报》

2015

多孔介质中沉积颗粒脱离特性试验研究

《岩土工程学报》

2015

多孔介质中悬浮颗粒迁移–沉积特性研究进展

《岩石力学与工程学报》

2015

三向压力盒的嵌入效应及其应力测量特性模拟

《岩土力学》

2015

节理三维形貌参数的采样效应与峰值抗剪强度准则

《中南大学学报(自然科学版)》

2015

地下水源热泵井周颗粒物理阻塞室内试验及模型研究

《太阳能学报》

2015

考虑剪切变形历史影响的节理峰值剪切强度准则

《山东大学学报(工学版)》

2015

Numerical investigation of rock heterogeneity effect on rock dynamic strength and failure process using cohesive fracture model

Engineering Geology

DOI

2015

A prediction model for uniaxial compressive strength of deteriorated rocks due to freeze–thaw

Cold Regions Science and Technology

DOI

2015

Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression

Engineering Geology

DOI

2015

The role of flaws on crack growth in rock-like material assessed by AE technique

International Journal of Fracture

DOI

2015

Acoustic Emission Behavior of Rock-Like Material Containing Two Flaws in the Process of Deformation Failure

Shock and Vibration

DOI

2014

水源热泵回灌井悬浮颗粒运移和沉积物理特性试验模型研究

《岩石力学与工程学报》

2014

深部巷道注浆加固浆液扩散机理与应用研究

《采矿与安全工程学报》

2014

深部软弱地层TBM掘进围岩变形破坏特性室内试验研究

《岩石力学与工程学报》

2014

温度–应力耦合作用下岩体裂隙扩展的数值流形方法研究

《岩石力学与工程学报》

2014

应变软化岩体分析原理及其应用

《岩土力学》

2014

一种新的块体接触检测技术及在非连续变形分析方法中的应用

《上海交通大学学报》

2014

New criterion for rock joints based on three-dimensional roughness parameters

Journal of Central South University

DOI

2014

Theory of Time-Temperature-Stress Equivalent Principle Based on Schapery Equation and Its Application on Granite

Materials Science

DOI

2014

Application of a combined support system to the weak floor reinforcement in deep underground coal mine

International Journal of Rock Mechanics and Mining Sciences

DOI

2013

裂隙岩体温度-渗流耦合数值流形方法

《工程科学与技术》

2013

TBM盘形滚刀破岩力计算模型研究

《煤炭学报》

2013

TBM应用于深部煤矿建设的可行性及关键科学问题

《采矿与安全工程学报》

2013

断层破碎带深部区域地表预注浆加固应用与分析

《岩石力学与工程学报》

2013

地下水源热泵砂层阻塞试验研究(Ⅱ)

《岩石力学与工程学报》

2013

高应力下原煤三轴压缩力学特性研究

《岩石力学与工程学报》

2013

淮南矿区深部岩巷典型围岩参数反分析研究!

《沈阳大学学报(自然科学版)》

2013

A fully coupled thermo-hydro-mechanical model for rock mass under freezing/thawing condition

Cold Regions Science and Technology

DOI

2013

Numerical analysis of THM coupling of a deeply buried roadway passing through composite strata and dense faults in a coal mine

Bulletin of Engineering Geology and the Environment

DOI

2013

Mechanical Model for Predicting Closure Behavior of Rock Joints Under Normal Stress

Rock Mechanics and Rock Engineering

DOI

2013

Impact of stress on solute transport in a fracture network: A comparison study

Journal of Rock Mechanics and Geotechnical Engineering

DOI

2012

岩石冻胀变形特征及寒区隧道冻胀变形模拟

《岩石力学与工程学报》

2012

平顶山矿区深部大规模松软围岩巷道支护技术

《岩石力学与工程学报》

2012

卸荷土体本构模型选用及其参数的确定——以港珠澳大桥拱北隧道明挖段基坑为例

《岩土工程学报》

2012

高地应力破碎软岩巷道底臌特性及综合控制对策研究

《岩土力学》

2012

朱集矿深井软岩巷道大变形机制及其控制研究

《岩土力学》

2012

Pipe Curtain Construction Method for Deep Mine Well Roadway Traversing Fault

DOI

2011

考虑温度效应的花岗岩蠕变损伤本构关系研究

《岩石力学与工程学报》

2011

地质异常带巷道稳定控制对策及效果研究

《岩石力学与工程学报》

2011

岩爆孕育发生过程中的微震活动规律研究

《采矿与安全工程学报》

2011

顾桥煤矿深井岩巷破碎软弱围岩支护方法探索

《岩土力学》

2011

ON EFFECT OF NON-PERSISTENT JOINTS ON HYDRO-MECHANICAL BEHAVIOR OF JOINTED ROCK MASS IN UDEC

DOI

2010

应力对裂隙岩体等效渗透系数影响的离散元分析

《岩石力学与工程学报》

2010

煤矿深部巷道底臌发生机理及防治对策研究

《矿冶工程》

2010

煤矿深部岩巷稳定控制理论与支护技术及应用

《科学出版社》

2010

煤矿深部巷道破裂围岩非线性大变形及支护对策研究

《岩土力学》

2009

基于数理统计的巷道塑性区边界分析

《采矿与安全工程学报》

2009

小煤柱沿空留巷巷道底板受力变形分析

《煤炭工程》

2009

高应力软岩非弹性体积增加试验研究

《煤炭学报》

2009

基于粘弹性理论的巷道围岩应力场、位移场解析预测

《金属矿山》

2008

深部岩巷稳定性控制方法及实例研究

《岩石力学与工程学报》

2008

非连续变形分析(DDA)方法中的预应力锚杆模拟

《地下空间与工程学报》

2007

用非连续变形分析方法模拟岩石裂纹扩展

《岩石力学与工程学报》

2006

龙潭隧道的流固耦合分析

《采矿与安全工程学报》

2005

岩石冻融破坏机理分析及冻融力学试验研究

《岩石力学与工程学报》

2004

光纤测量技术在岩土工程中的应用

《岩石力学与工程学报》

2002

单轴应力下岩石的热-粘弹塑性模型研究

《岩石力学与工程学报》

2002

温度饱和水下的裂隙岩体力学特性研究

《岩石力学与工程学报》

2002

岩石时-温等效原理的理论与实验研究——第二部分:岩石时-温等效原理主曲线与移位因子

《岩石力学与工程学报》

2002

岩石时-温等效原理的理论与实验研究──第一部分:岩石时-温等效原理的热力学基础

《岩石力学与工程学报》

2001

三峡花岗岩与温度及时间相关的力学性质试验研究

《岩石力学与工程学报》

2001

温度作用下的岩石热弹塑性本构方程的研究

《辽宁工程技术大学学报(自然科学版)》

2000

温度作用下脆性岩石的损伤分析

《岩石力学与工程学报》

2000

三维离散单元法及其在滑坡分析中的应用

《岩土工程学报》

1999

核废料贮存裂隙岩体耦合分析研究综述

《地质灾害与环境保护》

1993

大变形巷道的锚喷技术研究

《采矿与安全工程学报》

2017

多场耦合条件下水力裂缝在多孔岩石中的演变规律

《中国力学大会-2017暨庆祝中国力学学会成立60周年大会论文集（A）》

2015

岩石裂纹扩展过程研究及声波波速的连续测量方法

《中国地质学会2015学术年会论文摘要汇编（中册）》

2011

基于能量理论的岩爆倾向性研究

Proceedings of 2011 International Conference on Fuzzy Systems and Neural Computing(FSNC 2011 V6)

2011

潘二煤矿松软破碎岩层巷道底臌控制技术研究与实践

Proceedings of 2011 AASRI Conference on Artificial Intelligence and Industry Application（AASRI-AIIA 2011 V3）

2011

高地应力破碎软弱围岩巷道最佳支护时间确定

2011 AASRI Conference on Applied Information Technology(AASRI-AIT 2011);2011 AASRI Conference on Applied Information Technology(AASRIAIT 2011)

2010

地应力测试及其在深部巷道支护中的应用

《岩石力学与工程的创新和实践：第十一次全国岩石力学与工程学术大会论文集》

2009

淮南矿区深部岩巷典型围岩参数反分析研究

《第四届深部岩体力学与工程灾害控制学术研讨会暨中国矿业大学（北京）百年校庆学术会议》

2009

复杂荷载作用下冻结凿井井壁损伤应力分析

《中国软岩工程与深部灾害控制研究进展——第四届深部岩体力学与工程灾害控制学术研讨会暨中国矿业大学（北京）百年校庆学术会议论文集》

2008

二维粗糙裂隙网络的计算机模拟

《第二届废物地下处置学术研讨会》

2008

尤卡山长期渗透性演化的非饱和渗流建模研究(英文)

《第二届废物地下处置学术研讨会》

2000

水在非饱和砂-膨润土混合物中的流动

《新世纪岩石力学与工程的开拓和发展——中国岩石力学与工程学会第六次学术大会论文集》

2000

温度作用下脆性岩石的破坏类型及强度准则

《新世纪岩石力学与工程的开拓和发展——中国岩石力学与工程学会第六次学术大会论文集》

1999

3D DEM在节理岩体研究中的应用初探

《中国岩石力学与工程学会软岩工程专业委员会第二届学术大会》

1998

跨世纪的岩石力学与工程难题——核废料处理

《中国岩石力学与工程学会第五届学术大会》

2026

A Novel Configurational Mechanics-Based Finite-Discrete Element Method Framework for Intra-element Fracture Analysis

SSRN Electronic Journal

DOI

2025

Experimental study on the plowing effect of ripper tooth and its influence on scraper wear during shield TBM tunneling in abrasive sandy ground

Research Square

DOI

2024

A Novel Contact Interaction Algorithm for Combined Finite-Discrete Element Method and its Application in Tbm Jamming

SSRN Electronic Journal

DOI

2024

Experimental Investigation on the Propagation and Attenuation Characteristics of Stress Wave in the Layered Structure

SSRN Electronic Journal

DOI

2013

Method to simulating cracking of surrounding rock in coal mines

CRC Press eBooks

DOI

2021

Nanoindentation and AFM Dataset for the Microscale Mechanical Property of Granites

Zenodo (CERN European Organization for Nuclear Research)

DOI