杨健｜上海大学｜学者主页

2026

汽车外板非稳态交接坯夹杂物含量与尺寸的分布

高金桥，杨健，龚坚，黄福祥，裴兴伟，朱克然，刘凤刚，刘珍童

《连铸》

DOI

2026

结晶器卷渣引起的电镀锌汽车外板表面条状缺陷解析

邹偲文，杨健，职建军，杨军，范正洁，张志强

《炼钢》

2026

浸入式水口结构对窄薄断面结晶器流场、凝固和夹杂物捕获的影响

史智文，杨健，李贇通，简洋

《炼钢》

2026

热变形行为对20MnCr5齿轮钢热轧棒材MnS夹杂物的影响

王旭辉，杨健，张庆松，栗文浩，尹青，王维坤，张梅

《钢铁钒钛》

2026

镁质与钙质中间包覆盖剂对连铸坯中大型夹杂物分布的影响

杨丁丁，杨健，职建军，杨军，张志强，范正洁

《炼钢》

2026

Ti/N比对Mg处理船板钢焊后第二相粒子及韧性的影响

张玉旗，杨健，张银辉

《钢铁钒钛》

2026

大包换包对汽车外板连铸坯中夹杂物分布的影响

杜雨虹，杨健，职建军，杨军，张志强，范正洁

《炼钢》

2026

超低碳汽车外板连铸坯宽度方向上夹杂物分布

张雪娇，杨之顺，杨健，张银辉，职建军，王睿之，范正洁

《钢铁钒钛》

2026

汽车外板非稳态换包坯中不同成分夹杂物的分布

高金桥，杨之顺，张银辉，杨健，龚坚，黄福祥，裴兴伟

《钢铁钒钛》

2026

利用大样电解分析碳钢中大型夹杂物的研究进展

杨丁丁，杨健，职建军，杨军，范正洁，王睿之

《连铸》

2026

锰硫比对20MnCr5齿轮钢热轧棒材夹杂物析出行为的影响

王旭辉，杨健，张庆松，白云，卢明霞，尹青，吴小林，张银辉

《轧钢》

2026

Multiphase Flow Behavior and Entrapment of Bubbles and Inclusions in Ultra Narrow and Thin Slab Continuous Casting Molds With Different Widths

Zhiwen Shi, Peng Ou, Junwei Li, Shaojiang Yuan, Yang Jian, Yuntong Li, Tongsheng Zhang, Jian Yang

steel research international

DOI

2026

Effect of Zr Addition on Microstructure, Crack, and Toughness in the Coarse-Grained Heat-Affected Zone of Mg-Treated Steel After High-Heat Input Welding

Yu-Qi Zhang, Yu-Qi Zhang, Jian Yang, Yin-Hui Zhang, Yin-Hui Zhang, Yanli Chen, Liang Wang, Zhipeng Dai

JOM

DOI

2026

Multiparameter Optimization and Dephosphorization Capacity Evaluation of Converter Slag Based on Response Surface Methodology, Industrial, and Laboratory Experiments

Han Sun, Jian Yang, Tongsheng Zhang, Dawei Cai, Yang Peng, Jianxiong Mo, D Zhang, Jianhua Wang

steel research international

DOI

2026

Computational Insights Into the Influence of MgO and MnO on the Oxygen Network Structure and Transport Properties of the CaO‐SiO 2 ‐P 2 O 5 System

Zhenghao Zhou, Jian Yang, Jimin Zhao, Han Sun

steel research international

DOI

2025

双渣法转炉炼钢

杨健

2025

基于数理模拟与高温测速的浸入深度对结晶器流场的影响

白云，杨泽宇，李贇通，孙宪进，王科峰，朱国荣，林芷清，杨健

《连铸》

DOI

2025

Nb微合金齿轮钢晶粒长大行为与析出相的影响

代智鹏，杨健，张庆松，张银辉，白云，吴小林

《炼钢》

2025

特厚板坯厚度方向上夹杂物分布及中心裂纹形成机理

盖一铭，徐龙云，杨健

《炼钢》

2025

气幕挡墙和“V”形多孔挡墙对不规则三流中间包流场及温度场的影响

赵宇航，杨健，刘海春，巨伟锋，王朋飞，李晓明，张同生

《炼钢》

2025

大包换包对汽车外板连铸坯中夹杂物含量和尺寸的影响

杜雨虹，杨健，杨军，职建军，张志强，范正洁

《炼钢》

2025

氧和硫含量对低碳钢炼钢连铸过程夹杂物演变的影响

邹偲文，杨健，张银辉，赵加全，徐阳，王朋飞，王彦兵

《炼钢》

2025

A critical review of the challenges of developing continuous casting mold fluxes for high-Ti steels

Zhuo Chen, Jiajing Zhang, Xiting Li, Weitong Du, Jianchao Ma, Jian Yang

International Journal of Minerals Metallurgy and Materials

DOI

2025

Fracture mechanisms of CGHAZ for Mg and Ca–Mg deoxidized HSLA steels after HHIW based on microstructures, crack behaviors and mechanical properties

Liang Wang, Jian Yang, Yinhui Zhang, Yanli Chen, Yu-qi Zhang, Longyun Xu

Journal of Iron and Steel Research International

DOI

2025

Insight into Cu on Precipitates, PAG Growth, and Impact Toughness of CGHAZ for Ca-Ti Deoxidized HSLA Steels After HHIW

Liang Wang, Jian Yang, Yinhui Zhang, Yuqi Zhang, Yanli Chen

Metallurgical and Materials Transactions B

DOI

2025

Numerical Simulation of Mold Flux Entrapment in Slab CC Mold Under Double-Ruler EMBr Condition Assisted with High-Temperature Quantitative Velocity Measurement

Yuntong Li, Wenyuan He, Changliang Zhao, Jian Yang, Zhuo Chen, Yang Jian, Zhiwen Shi

Metallurgical and Materials Transactions B

DOI

2025

Effect of Cu on CGHAZ Low-Temperature Impact Toughness in Ca-Ti-Deoxidized HSLA Steels After HHIW: Insights from Inclusions, Microstructures, and Fracture Analysis

Liang Wang, Zhong Ding, Jian Yang, Yinhui Zhang, Yuqi Zhang, Yanli Chen, Fengqi Zhou, Zhipeng Dai

Metallurgical and Materials Transactions B

DOI

2025

Insight into Ca Addition on Phase Transformation in CGHAZ of Mg Deoxidized Shipbuilding Steel Plates with In-situ Observation

Liang Wang, Jian Yang, Yinhui Zhang, Yuqi Zhang, Yanli Chen, Zhipeng Dai, Tingting Li

Metallurgical and Materials Transactions B

DOI

2025

Effect of Al content on nanoprecipitates, austenite grain growth and toughness in coarse-grained heat-affected zones of Al–Ti–Ca deoxidized shipbuilding steels

Tingting Li, Jian Yang, Yinhui Zhang, Han Sun, Yanli Chen, Yuqi Zhang

International Journal of Minerals Metallurgy and Materials

DOI

2025

Influence of Hot Deformation on MnS Inclusions and the Composite Inclusions in 20MnCr5 Gear Steel Bars

Zhipeng Dai, Zhishun Yang, Jian Yang, Qingsong Zhang, Qing Yin, Mei Zhang, Xuhui Wang, Liang Wang

steel research international

DOI

2025

Atomistic insights into the short- and medium-range structure and transport properties of EAF slag: The role of iron oxide

Jimin Zhao, Jian Yang, Han Sun, Zhenghao Zhou, Liang Wang

Chemical Engineering Science

DOI

2025

Effect of Zr addition on inclusions, micro-structures and toughness in the heat-affected zone of Mg deoxidised ship steel after high heat input welding

Yuqi Zhang, Jian Yang, Yinhui Zhang, Liang Wang, Ting-ting Li, Yanli Chen

Science and Technology of Welding & Joining

DOI

2025

The effects of Ca content on intragranular acicular ferrite nucleation in the CGHAZ of Al-Ca-Ti deoxidised shipbuilding steel

Tingting Li, Jian Yang, Yinhui Zhang, Yanli Chen, Yuqi Zhang, Liang Wang

Science and Technology of Welding & Joining

DOI

2025

Study on Mold Flux Entrapment by Numerical Simulation, Water Modeling, and High‐Temperature Quantitative Velocity Measurement

Yuntong Li, Jian Yang, Han Ma, Yanzhao Zhou, Jianchao Ma, Jiaqi Zhao, Zhuo Chen, Yuhang Zhao, Zhiwen Shi

steel research international

DOI

2025

Deeply understanding the physicochemical properties of LCDSP slag from atomic structure to macroscopic properties: A blueprint for the green and low-carbon steelmaking process

Han Sun, Jian Yang, Tongsheng Zhang, Dawei Cai, Yang Peng, Jian-Xiong Mo, D Zhang, Jianhua Wang

Journal of Materials Research and Technology

DOI

2025

Numerical Simulation of the Flow Field and Inclusion Entrapment in Ultrawide Slab Continuous Casting Mold Combined with High‐Temperature Velocity Quantitative Measurement

Zhuo Chen, Jian Yang, Kefeng Wang, Guorong Zhu, Xianjin Sun, Tongsheng Zhang, Yuhang Zhao, Yuntong Li

steel research international

DOI

2025

Deterioration mechanism of impact toughness in the coarse-grained heat-affected zone of Ca-treated shipbuilding steel plate with high-Cr content

Tingting Li, Jian Yang, Yinhui Zhang, Han Sun, Pengfei Hu, XU Longyun

Journal of Alloys and Compounds

DOI

2025

Effect of Holding Time on Prior Austenite Grain Sizes and TiN Particles in Mg-Treated Steels Used for HHIW at the High Temperature of 1350 °C

Yuqi Zhang, Jian Yang, Yinhui Zhang, Liang Wang, Ting-ting Li, Yanli Chen, Rongbin Li

Journal of Materials Engineering and Performance

DOI

2025

Numerical simulation of flow field in continuous casting slab mould under EMS conditions assisted with high-temperature quantitative velocity measurement

Yuntong Li, Jian Yang, Yibo Liu, Qun Sun, Yang Lin, Lin Du, Jinsong Meng

Ironmaking & Steelmaking Processes Products and Applications

DOI

2025

Effect of Ti/N Ratio on Inclusions, Microstructure, and Toughness of Heat-Affected Zone of Steel Plate After High Heat Input Welding with Ca Deoxidization

Yanli Chen, Jian Yang, Yinhui Zhang, Tingting Li, Yuqi Zhang

Journal of Sustainable Metallurgy

DOI

2025

Influence of electromagnetic stirring on the flow field and argon bubble distribution in the continuous casting mold of slab based on high-temperature online measurement of flow velocity near the mold surface

Zhuo Chen, Yang Jian, Yuhang Zhao, Yuntong Li, Tongsheng Zhang, Jian Qing Gong, Fuxiang Huang, Xingwei Pei, Keran Zhu, Fenggang Liu, Zhentong Liu

Metallurgical Research & Technology

DOI

2024

超低碳IF钢冶炼过程炉渣对夹杂物控制研究进展

王亮，杨健，张同生，张银辉

《炼钢》

2024

工业试验Mg脱氧HSLA钢CGHAZ的夹杂物、组织及韧性的特征分析

杜海龙，张银辉，杨健，张宇，张玉旗

《炼钢》

2024

基于水模拟的控流装置对双流板坯中间包流场的影响

杨泽宇，何文远，赵长亮，赵宇航，李贇通，林芷清，杨健

《炼钢》

2024

结晶器保护渣原渣形貌及连铸结团样矿相组织分析

盖一铭，徐龙云，张同生，杨健

《炼钢》

2024

基于数学物理模拟和高温测速的拉速对吹氩结晶器流场行为的影响

杨泽宇，杨健，李贇通，林芷清

《炼钢》

2024

Prediction of BOF endpoint carbon content and temperature via CSSA-BP neural network model

Xiao-feng Qiu, Runhao Zhang, Jian Yang

Journal of Iron and Steel Research International

DOI

2024

Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements

Tingting Li, Jian Yang

International Journal of Minerals Metallurgy and Materials

DOI

2024

Composition Engineering on the Structure and Transport Properties of CaO–SiO2–P2O5 System: A Computational Insight

Han Sun, Jian Yang, Runhao Zhang

Metallurgical and Materials Transactions B

DOI

2024

Phosphorus Removal Properties of the Fe–C–Si–Mn–P–S Metallic Melts Based on the Atom–Molecule Coexistence Theory: Mutual Verification by Industrial and Laboratorial Experiments

Han Sun, Jian Yang, Wenkui Yang, Runhao Zhang

Metallurgical and Materials Transactions B

DOI

2024

Prediction of lime utilization ratio of dephosphorization in BOF steelmaking based on online sequential extreme learning machine with forgetting mechanism

Runhao Zhang, Jian Yang, Han Sun, Wenkui Yang

International Journal of Minerals Metallurgy and Materials

DOI

2024

Microstructure and Fracture Characteristics of HAZs of Ca- deoxidized Steel Plates with Different Ti/N Ratios After HHIW

Yanli Chen, Jian Yang, Yinhui Zhang, Tingting Li, Yuqi Zhang

Metals and Materials International

DOI

2024

Effect of Nb Content on the Abnormal Grain Growth in 20MnCr5 Hot‐Rolled Bar

Zhipeng Dai, Jian Yang, Qingsong Zhang, Yun Hao Bai, Mingxia Lu, Xuhui Wang, Yuqi Zhang

steel research international

DOI

2024

Effect of Ca Addition on Inclusions, Microstructures, and Impact Toughness of Coarse‐Grained Heat‐Affected Zone After High‐Heat Input Welding in Mg‐Deoxidized Shipbuilding Steel Plates

Liang Wang, Jian Yang, Yuqi Zhang, Yinhui Zhang, Tingting Li, Yanli Chen

steel research international

DOI

2024

Insight into the TiO2 on transport behavior and heat transfer of the CaO–SiO2–FeO–MgO system at different basicities: Molecular dynamics simulation and thermodynamics

Han Sun, Jian Yang, Tongsheng Zhang, Tingting Li, Runhao Zhang

Ceramics International

DOI

2024

Mathematical Modeling of Transient Submerged Entry Nozzle Clogging and Its Effect on Flow Field, Bubble Distribution and Interface Fluctuation in Slab Continuous Casting Mold

Yuntong Li, Wenyuan He, Changliang Zhao, Jianqiu Liu, Zeyu Yang, Yuhang Zhao, Jian Yang

Metals

DOI

2024

Comparison of the Flow Field in the Slab Continuous Casting Mold Between the Two- and Three-Hole Nozzles with High Temperature Quantitative Velocity Measurement and Numerical Simulation

Yuntong Li, Jian Yang, Jinsong Meng, Qun Sun, Yang Lin, Lin Du, Zeyu Yang, Zhuo Chen

JOM

DOI

2024

Effect of Ti/N Ratio on TiN Particles, Microstructures, and Toughness of Heat‐Affected Zone After High Heat Input Welding of the Ca‐Treated Steel Plates

Yanli Chen, Jian Yang, Yinhui Zhang, Tingting Li, Yuqi Zhang

steel research international

DOI

2024

Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in Low‐Carbon Double Slag Converter Steelmaking Process with Industrial Experiments, Mineralogy, and Ion–molecule Coexistence Theory

Han Sun, Jian Yang, Runhao Zhang

steel research international

DOI

2024

Inclusions and microstructures in coarse-grained heat-affected zone of Al–Ti–Ca deoxidized shipbuilding steels with different Al contents after high-heat input welding

Tingting Li, Jian Yang, Yinhui Zhang, Yuqi Zhang, Yanli Chen, Longyun Xu, Rongbin Li

Journal of Materials Research and Technology

DOI

2024

Dephosphorization Kinetics of Hot Metal at Low Slag Basicity and Low Temperature under the Different Fe2O3 Addition Amounts

Runhao Zhang, Jian Yang, Longyun Xu, Liang Frank Wang, Han Sun, Wenkui Yang, Jinqiao Gao

steel research international

DOI

2024

Insight into the structure and transport properties of CaO-SiO2-P2O5 system during the phosphorus enrichment process: A molecular dynamics simulation

Han Sun, Jian Yang, Runhao Zhang, Longyun Xu

Journal of Non-Crystalline Solids

DOI

2024

Numerical Simulation of Flow Field, Distribution of Bubbles, and Inclusions in Slab Continuous Casting Mold under Electromagnetic Braking Assisted with High‐Temperature Quantitative Velocity Measurement

Yuntong Li, Wenyuan He, Changliang Zhao, Yanqiang Liu, Zeyu Yang, Yi Maggie Guo, Yang Jian

steel research international

DOI

2023

Mg处理对厚板中第二相粒子、HAZ组织及韧性的影响

张玉旗，张银辉，杨健

《炼钢》

2023

利用Ca、Zr和稀土的氧化物冶金技术最新进展

陈妍利，杨健

《炼钢》

2023

铝脱氧25Mn钢圆坯中夹杂物的分布规律

杨文魁，宋景凌，周旋，朱庆桂，李恒华，刘合萍，杨健

《炼钢》

2023

低硅钢种LF精炼控硅脱硫技术进展

盖一铭，杨健

《炼钢》

2023

State of the art in applications of machine learning in steelmaking process modeling

Runhao Zhang, Jian Yang

International Journal of Minerals Metallurgy and Materials

DOI

2023

Numerical Simulation of Transient Submerged Entry Nozzle Clogging With Euler–Euler and Euler–Lagrange Frameworks

Jian-Qiu Liu, Yibo Liu, Qun Sun, Yang Lin, Lin Du, Jinsong Meng, Jian Yang

Metallurgical and Materials Transactions B

DOI

2023

Characteristics of Inclusions and Microstructures Around Solidification Hook of Low-Carbon Steel Continuous Casting Slab

Qing Zhang, Jian Yang, Tingting Li, Jian Qing Gong, Fuxiang Huang, Keran Zhu, Fenggang Liu, Zhentong Liu

Metallurgical and Materials Transactions B

DOI

2023

Phosphorus Enrichment Capacity of Calcium Silicates in Multiphase Dephosphorization Slag Based on Laboratory High Temperature Experiments and IMCT

Han Sun, Wenkui Yang, Runhao Zhang, Jian Yang

Metallurgical and Materials Transactions B

DOI

2023

Distribution of Large‐Size Inclusions in Transition Slabs for Automotive Exposed Panel Steel

Miaomiao Ren, Jianjun Zhi, Zhengjie Fan, Jun Yang, Jun Yang, Ruizhi Wang, Yanli Chen, Jian Yang, Jian Yang

steel research international

DOI

2023

Optimization of Port Angle for Narrow‐Width Mold Flow Field under High Casting Speed Based on Large Eddy Simulation and High‐Temperature Measurement of Velocity

Yi Guo, Jian Yang, Jian-Qiu Liu

steel research international

DOI

2023

Influence of Ti/N Ratio on Inclusions, Microstructures, and Toughness in Heat‐Affected Zone of Shipbuilding Steel Plates with Mg Deoxidation after High Heat Input Welding

Yuqi Zhang, Yuqi Zhang, Yinhui Zhang, Yinhui Zhang, Jian Yang, Tingting Li, Yanli Chen

steel research international

DOI

2023

Particles, Microstructures, and Impact Toughness of CGHAZ of Ca Deoxidation Shipbuilding Steel Plates with Different Nb Contents

Tingting Li, Jian Yang, Yinhui Zhang, Yanli Chen, Yuqi Zhang

steel research international

DOI

2023

Formation and Evolution Mechanism of the Inclusions of Al2O3·SiO2·CaO and Al2O3·SiO2·CaO·MgO in Seamless Steel Tube Steel

Wenkui Yang, Jian Yang, Runhao Zhang, Han Sun, Jingling Song, Yinghui Zhao, Xuan Zhou

steel research international

DOI

2023

Effect of Al2O3 Inclusions or Mold Flux Particles on Their Surrounding Microstructures of Sliver Defects on the Surface of Automobile Exposed Panel

Qing Zhang, Tingting Li, Jian Yang

Metals

DOI

2023

Influence of Ladle Exchange on Inclusions in Transition Slabs of Continuous Casting for Automotive Exposed Panel Steel

Miaomiao Ren, Jianjun Zhi, Zhengjie Fan, Ruizhi Wang, Yanli Chen, Jian Yang

Metals

DOI

2023

Influence of casting speed change and submerged entry nozzle offset on mold flow field in unsteady-state continuous casting process

Zhi-Qing Lin, Jian Yang, Fuxiang Huang, Keran Zhu, Jian Gong, Zhentong Liu, Fenggang Liu

Metallurgical Research & Technology

DOI

2023

Effect of Mo content on impact toughness of CGHAZ in offshore engineering steels at different low temperatures

Hailong Du, Yinhui Zhang, Yuqi Zhang, Jian Yang

Metallurgical Research & Technology

DOI

2022

RH精炼钢包底吹工艺优化物理模拟研究

庞佳佳，包燕平，华承健，孙宇秋，杨健

《炼钢》

2022

稀土处理的无取向硅钢夹杂物控制研究进展

杨健，李婷婷

《钢铁》

2022

Comprehensive Evaluation of Phosphorus Enrichment Capacity for Decarburization Slag at Different Temperatures Based on Industrial Experiments, Mineral Phase Analysis and Ion–Molecule Coexistence Theory

Han Sun, Jian Yang, Wenkui Yang, Runhao Zhang

Metallurgical and Materials Transactions B

DOI

2022

Numerical Investigation for Effects of Polydisperse Argon Bubbles on Molten Steel Flow and Liquid Slag Entrapment in a Slab Continuous Casting Mold

Lei Wang, Jian Yang, Yibo Liu

Metallurgical and Materials Transactions B

DOI

2022

Kinetics of Dephosphorization in Double Slag Converter Steelmaking Process at Different Temperatures With Industrial Experiments and Laboratorial Experiments

Runhao Zhang, Jian Yang, Wenkui Yang, Han Sun

Metallurgical and Materials Transactions B

DOI

2022

Influence of Temperature on Dephosphorization at Lower Basicity and Lower Temperature Based on Industrial Experiments and IMCT

Han Sun, Jian Yang, Runhao Zhang, Wenkui Yang

ISIJ International

DOI

2022

Effect of Physicochemical Properties of Slag on the Removal Rate of Alumina Inclusions in the Ruhrstahl–Heraeus (RH) Refining Conditions

Taesung Kim, Jian Yang, Joo Hyun Park

Metallurgical and Materials Transactions B

DOI

2022

Mathematical Modeling of Mold Flow Field and Mold Flux Entrainment Assisted With High-Temperature Quantitative Velocity Measurement and Water Modeling

Yibo Liu, Jian Yang, Zhi-Qing Lin

Metallurgical and Materials Transactions B

DOI

2022

In-situ Observation of Bainite Transformation in CGHAZ of 420 MPa Grade Offshore Engineering Steel with Different Mo Contents

Dekun Liu, Jian Yang, Yinhui Zhang

ISIJ International

DOI

2022

Effect of Boron Content on Microstructure and Impact Toughness in CGHAZ of Shipbuilding Steel Plates with Ca Deoxidation

Dekun Liu, Jian Yang, Yinhui Zhang

steel research international

DOI

2022

Comparison of the Prediction of BOF End‐Point Phosphorus Content Among Machine Learning Models and Metallurgical Mechanism Model

Runhao Zhang, Jian Yang, Siwei Wu, Han Sun, Wenkui Yang

steel research international

DOI

2022

Evaluation of Phosphorus Enrichment Capacity of CaO–SiO 2 –FeO–MgO–MnO–P 2 O 5 –Al 2 O 3 Dephosphorization Slag Based on Ion‐Molecule Coexistence Theory

Han Sun, Jian Yang, Wenkui Yang, Runhao Zhang

steel research international

DOI

2022

Effect of Ca Deoxidation on Toughening of Heat-Affected Zone in High-Strength Low-Alloy Steels after Large-Heat-Input Welding

Yinhui Zhang, Jian Yang, Hailong Du, Yu Zhang, Han Ma

Metals

DOI

2022

Effect of Si Content on the Microstructures and Toughness in Heat‐Affected Zone of Offshore Engineering Steels with Mg Deoxidation

Xiaoqian Pan, Jian Yang, Yinhui Zhang, Rongbin Li

steel research international

DOI

2022

Dephosphorization at Low Temperature and Low Basicity in the Double Slag Converter Steelmaking Process With Low CO2 Emission

Jian Yang, Runhao Zhang, Wanli Yang, Han Sun

DOI

2022

Implementation and verification of a Quasi-Eulerian-Eulerian-IATE model for the high-efficient prediction of polydispersed bubbly flows in a continuous casting mold

Liang Frank Wang, Jian Yang, Yao Liu

Chemical Engineering Science

DOI

2022

Effect of B Segregation at Prior Austenite Grain Boundaries on Microstructures and Toughness in the Heat‐Affected Zone of Mg‐Deoxidized Shipbuilding Steel Plates

Xiaoqian Pan, Jian Yang, Yinhui Zhang

steel research international

DOI

2022

Evolution behaviour and modification mechanism of inclusions in NM500 wear-resistant steel with calcium treatment

Han Sun, Jian Yang

Ironmaking & Steelmaking Processes Products and Applications

DOI

2022

Microstructure Evolution in Heat-Affected Zone of Shipbuilding Steel Plates with Mg Deoxidation Containing Different Nb Contents

Xiaoqian Pan, Jian Yang, Yinhui Zhang

Metallurgical and Materials Transactions A

DOI

2022

Morphology and crystallography of microstructures in Mg-deoxidized offshore engineering steels after simulated welding thermal cycles

Xiaoqian Pan, Jianjun Zhi, Zhengjie Fan, Yinhui Zhang, Rongbin Li, Jian Yang

Ironmaking & Steelmaking Processes Products and Applications

DOI

2022

Effect of C and Si contents on microstructure and impact toughness in CGHAZ of offshore engineering steel

Dekun Liu, Jian Yang, Yinhui Zhang, Rongbin Li

Metallurgical Research & Technology

DOI

2022

Toughness and fracture mechanism at low temperature of offshore engineering steel at different welding heat inputs

Dekun Liu, Jian Yang, Yinhui Zhang

Metallurgical Research & Technology

DOI

2022

Mechanism of improving transverse corner cracks of peritectic steel slab based on control of inclusions and microstructures with magnesium treatment

Wenjing Cai, Jian Yang, Liqin Deng, Kanglin Zuo, Xufeng Wu

Metallurgical Research & Technology

DOI

2021

水口倾角大范围变化对宽板坯连铸结晶器流场的影响

马超，何文远，乔焕山，赵长亮，杨健

《炼钢》

2021

连铸坯凝固钩形成机理与控制技术综述

李婷婷，杨健，黄福祥，朱克然，裴兴伟

《炼钢》

2021

镁处理对钢中夹杂物以及HAZ组织和性能的影响

杨健，蔡文菁

《钢铁》

DOI

2021

氧含量对超低碳钢炼钢连铸过程夹杂物演变的影响

黄淑媛，罗钢，杨健，徐刚军，周军军，郑庆

《炼钢》

2021

包晶钢连铸坯角横裂的产生机理与控制技术综述

蔡文菁，杨健，邓丽琴，左康林，吴旭峰

《炼钢》

2021

碱度和全铁含量对新双渣法转炉炼钢脱磷渣物相的影响

杨之俊，张润灏，杨健，杨文魁，孙晗，高福彬

《炼钢》

2021

风塔板钢炼钢连铸过程中夹杂物的演变

周杨鹏，杨健，郑磊，和珍宝，左帅

《炼钢》

2021

薄厚度板坯连铸机非稳态连铸坯中夹杂物分布

黄淑媛，杨健，李广帮，康伟，廖相巍，田勇

《炼钢》

2021

钙处理低合金高强钢连铸过程中塞棒侵蚀机理及其改进

周杨鹏，杨健，鲁欣武，刘万善

《炼钢》

2021

中间包流场控制技术的进展

刘逸波，杨健

《连铸》

DOI

2021

基于机器学习的钢铁轧制过程性能预测

杨健，吴思炜

《钢铁》

DOI

2021

Microstructure and Viscosity of Dephosphorization Slag in New Double Slag Converter Steelmaking Process

Wenkui Yang, Jian Yang, Runhao Zhang, Han Sun

ISIJ International

DOI

2021

Mathematical modeling of flow field in slab continuous casting mold considering mold powder and solidified shell with high temperature quantitative measurement

Yibo Liu, Jian Yang, Chao Ma, Tao Zhang, Fu-bin Gao, LI Tai-quan, Junli Chen

Journal of Iron and Steel Research International

DOI

2021

Effect of Mo content on nano-scaled particles, prior austenite grains and impact toughness of CGHAZ in offshore engineering steels

Dekun Liu, Jian Yang, Yinhui Zhang, Longyun Xu

Journal of Iron and Steel Research International

DOI

2021

Effect of Slag Basicity on Dephosphorization at Lower Basicity and Lower Temperature Based on Industrial Experiments and Ion-Molecular Coexistence Theory

Han Sun, Jian Yang, Runhao Zhang, Wenkui Yang

Metallurgical and Materials Transactions B

DOI

2021

Prediction of the Charpy V-notch impact energy of low carbon steel using a shallow neural network and deep learning

Siwei Wu, Jian Yang, Guangming Cao

International Journal of Minerals Metallurgy and Materials

DOI

2021

Effect of Mold Width on the Flow Field in a Slab Continuous-Casting Mold with High-Temperature Velocity Measurement and Numerical Simulation

Jian-Qiu Liu, Jian Yang, Chao Ma, Yi Guo, Wenyuan He, Changliang Zhao, Renbo Jiang, Yintao Guo

Metals

DOI

2021

Characteristics and Evolution of Inclusions in Ti‐Bearing Peritectic Steel with Mg Treatment

Wenjing Cai, Liqin Deng, Jian Yang, Kanglin Zuo, Xufeng Wu

steel research international

DOI

2021

Characteristics of sliver defects caused by mould flux entrainment on the surface of the hot-dip galvanised automobile exposed panel

Tingting Li, Jian Yang, Guang-bang Li, Wei Min Kang, Yang Lin, Jinsong Meng

Ironmaking & Steelmaking Processes Products and Applications

DOI

2021

Comparison of the Flow Field in a Slab Continuous Casting Mold between the Thicknesses of 180 mm and 250 mm by High Temperature Quantitative Measurement and Numerical Simulation

Yibo Liu, Jian Yang, Fuxiang Huang, Keran Zhu, Fenggang Liu, Jian Qing Gong

Metals

DOI

2021

Effect of the Basicity on Mineralogical Phases and Micro-Structure of Dephosphorization Slag in the New Double Slag Converter Steelmaking Process

Wenkui Yang, Jian Yang, Runhao Zhang, Han Sun, Yunlong Qiu

Metals

DOI

2021

Dephosphorization in New Double Slag Converter Steelmaking Process with High‐Temperature Laboratorial Experiments

Wenkui Yang, Runhao Zhang, Han Sun, Jian Yang

steel research international

DOI

2021

Kinetic model of dephosphorization in the new double slag converter steelmaking process

Runhao Zhang, Jian Yang, Wenkui Yang, Han Sun

Ironmaking & Steelmaking Processes Products and Applications

DOI

2021

Kinetics of Dephosphorization at Different Slag Basicities in the Double Slag Converter Steelmaking Process

Runhao Zhang, Jian Yang, Han Sun, Wenkui Yang

steel research international

DOI

2021

Microstructure and Fracture Characteristics of Heat‐Affected Zone in Shipbuilding Steel Plates with Mg Deoxidation after High Heat Input Welding

Xiaoqian Pan, Jian Yang, Yinhui Zhang

steel research international

DOI

2021

Effect of Welding Heat Input on the Microstructure and Impact Toughness of HAZ in 420 MPa-Grade Offshore Engineering Steel

Dekun Liu, Jian Yang, Yinhui Zhang, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong

Frontiers in Materials

DOI

2021

Dephosphorization in Double Slag Converter Steelmaking Process at Different Temperatures by Industrial Experiments

Han Sun, Jian Yang, LU Xin-wu, Wanshan Liu, Gefan Ye, Runhao Zhang, Wenkui Yang

Metals

DOI

2021

Effect of the Initial P Content on Dephosphorization of Hot Metal with Low Basicity Slag at 1623 K

Wenkui Yang, Jian Yang, Runhao Zhang, Han Sun

steel research international

DOI

2021

Relationship between the Microstructure and Impact Toughness of the Coarse‐Grained Heat‐Affected Zone for Offshore Engineering Steels with Different Mg Contents

Xiaoqian Pan, Jianjun Zhi, Zhengjie Fan, Yinhui Zhang, Jian Yang

steel research international

DOI

2021

Effect of the Fe2O3 Addition Amount on Dephosphorization of Hot Metal with Low Basicity Slag by High-Temperature Laboratorial Experiments

Wenkui Yang, Jian Yang, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang, Han Sun

Metals

DOI

2021

Flow Field in Slab Continuous Casting Mold with Large Width Optimized with High Temperature Quantitative Measurement and Numerical Calculation

Chao Ma, Wenyuan He, Huan-shan Qiao, Changliang Zhao, Yibo Liu, Jian Yang

Metals

DOI

2021

Improvement of Impact Toughness of the Welding Heat-Affected Zone in High-Strength Low-Alloy Steels through Ca Deoxidation

Yinhui Zhang, Jian Yang, Dekun Liu, Xiaoqian Pan, Longyun Xu

Metallurgical and Materials Transactions A

DOI

2021

Influence of the Mg content on the austenite grain growth in heat-affected zone of offshore engineering steels considering TiN particle pinning and Mo solute drag effects

Xiaoqian Pan, Jian Yang, Yinhui Zhang, Joo Hyun Park, Hideki Ono

Metallurgical Research & Technology

DOI

2021

A convolutional neural network-based model for predicting lime utilization ratio in the KR desulfurization process

Siwei Wu, Jian Yang

Metallurgical Research & Technology

DOI

2020

汽车外板连铸结晶器流场与SEN出口形状优化

蒋鹏，何文远，乔焕山，赵长亮，张涛，杨健

《炼钢》

2020

Behavior of phosphorus enrichment in dephosphorization slag at low temperature and low basicity

Gefan Ye, Jian Yang, Runhao Zhang, Wenkui Yang, Han Sun

International Journal of Minerals Metallurgy and Materials

DOI

2020

Effects of coarse particles, prior austenite grains, and microstructures on impact toughness in heat-affected zone of Mg deoxidation steel plates without or with Al addition

Xiaoqian Pan, Jian Yang, Qingdong Zhong, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong

Ironmaking & Steelmaking Processes Products and Applications

DOI

2020

Effect of Temperature on Dephosphorization of Hot Metal in Double‐Slag Converter Steelmaking Process by High‐Temperature Laboratorial Experiments

Wenkui Yang, Jian Yang, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang, Gefan Ye

steel research international

DOI

2020

Effects of Al addition on austenite grain growth, submicrometre and nanometre particles in heat-affected zone of steel plates with Mg deoxidation

Xiaoqian Pan, Jian Yang, Yinhui Zhang, Longyun Xu, Rongbin Li

Ironmaking & Steelmaking Processes Products and Applications

DOI

2020

Effects of Mg Content on Characteristics of Nanoscale TiN Particles and Toughness of Heat-Affected Zones of Steel Plates After High-Heat-Input Welding

Longyun Xu, Jian Yang

Metallurgical and Materials Transactions A

DOI

2020

Probable Maximum Sizes of Inclusions Predicted by SEV and PSD for BH Steels of Automobile Exposed Panel with Different Sulfur Contents

Xiaoqian Pan, Jian Yang

Metals

DOI

2020

Composition-Processing-Property Correlation Mining of Nb–Ti Microalloyed Steel Based on Industrial Data

Siwei Wu, Jian Yang, Zhenyu Liu

MATERIALS TRANSACTIONS

DOI

2020

Effect of basicity on dephosphorization of hot metal with a low basicity slag at 1653 K

Wenkui Yang, Jian Yang, Yanqiu Shi, Zhijun Yang, Fubin Gao, Runhao Zhang, Gefan Ye

Ironmaking & Steelmaking Processes Products and Applications

DOI

2020

Mechanism of Improving Heat-Affected Zone Toughness of Steel Plate with Mg Deoxidation after High-Heat-Input Welding

Longyun Xu, Jian Yang, Joo Hyun Park, Hideki Ono

Metals

DOI

2020

Prediction of Endpoint Sulfur Content in KR Desulfurization Based on the Hybrid Algorithm Combining Artificial Neural Network With SAPSO

Siwei Wu, Jian Yang, Runhao Zhang, Hideki Ono

IEEE Access

DOI

2020

Elevating Prediction Performance for Mechanical Properties of Hot-Rolled Strips by Using Semi-Supervised Regression and Deep Learning

Siwei Wu, Jian Yang, Guangming Cao, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong

IEEE Access

DOI

2019

超低碳汽车外板BH钢炼钢过程中夹杂物的演变

潘晓倩，杨健，职建军，王睿之，范正洁，徐龙云

《钢铁》

DOI

2019

工艺参数对低温低碱度条件下转炉脱磷效果的影响

叶格凡，杨健，鲁欣武，王辉，刘万善，张润灏，杨文魁

《炼钢》

2019

Optimization of Flow Field in Slab Continuous Casting Mold with Medium Width Using High Temperature Measurement and Numerical Simulation for Automobile Exposed Panel Production

Peng Jiang, Jian Yang, Tao Zhang, Gang-jun Xu, Hongjun Liu, Junjun Zhou, Wei Qin

Metals

DOI

2019

The Effect of Ca Content on the Formation Behavior of Inclusions in the Heat Affected Zone of Thick High-Strength Low-Alloy Steel Plates after Large Heat Input Weldings

Yinhui Zhang, Jian Yang, Longyun Xu, Yunlong Qiu, Guoguang Cheng, Meiyi Yao, Jianxin Dong

Metals

DOI

2019

CALPHAD-based alloy design of cast austenitic heat-resistant steels with enhanced strength at 1000 °C

Yinhui Zhang, Jian Yang

Calphad

DOI

2019

Comparisons of Different Data-Driven Modeling Techniques for Predicting Tensile Strength of X70 Pipeline Steels

Siwei Wu, Jia-kuan Ren, Xiaoguang Zhou, Guangming Cao, Zhenyu Liu, Jian Yang

Transactions of the Indian Institute of Metals

DOI

2018

大方坯连铸机液压技术的应用探讨

杨健，刘艳

《中国金属通报》

2018

Ce含量对EH40船板钢热影响区夹杂物的影响

王睿之，杨健，职建军

《炼钢》

2018

Formation of Nb(C,N) Carbonitride in Cast Austenitic Heat-Resistant Steel during Directional Solidification under Different Withdraw Rates

Yinhui Zhang, Jian Yang

Materials

DOI

2018

Influence of Al Content on the Inclusion-Microstructure Relationship in the Heat-Affected Zone of a Steel Plate with Mg Deoxidation after High-Heat-Input Welding

Longyun Xu, Jian Yang, Ruizhi Wang

Metals

DOI

2018

Improvement of Heat-Affected Zone Toughness of Steel Plates for High Heat Input Welding by Inclusion Control with Ca Deoxidation

Ruizhi Wang, Jian Yang, Longyun Xu

Metals

DOI

2018

Effect of N/C Ratio on Precipitation Behavior of (Cr,Fe)23C6 Carbide in Novel Cast Austenitic Heat-Resistant Steels during Directional Solidification

Yinhui Zhang, Jian Yang

Metals

DOI

2017

Ca系氧化物冶金工艺对夹杂物及组织的影响

王睿之，杨健

《炼钢》

2017

Mg含量对焊接热影响区夹杂物及组织的影响

徐龙云，杨健，王睿之，王万林

《炼钢》

2017

板坯连铸漏钢与铸机设备精度之间的关系

杨健

《科技、经济、市场》

2017

Effect of Welding Heat Input on Microstructure and Toughness of Heated‐Affected Zone in Steel Plate with Mg Deoxidation

Longyun Xu, Jian Yang, Ruizhi Wang, Wanlin Wang, Zhongmin Ren

steel research international

DOI

2016

非钙处理铝脱氧车轮钢夹杂物形成及变形行为

赵东伟，李海波，高攀，杨健，郝丽霞

《钢铁》

2016

钙脱氧和镁脱氧的氧化物冶金工艺效果对比

王睿之，杨健，祝凯，王毓男

《炼钢》

2016

Mn含量对于连铸坯特性的影响

杨健，阮晓明，王睿之，祝凯，李成斌，范正洁

《连铸》

2015

不锈钢渣资源化利用技术研究现状

汪正洁，杨健，潘德安，刘波，田建军，张深根

《钢铁研究学报》

2012

厚钢板焊接热影响区失效机理分析及改善方法研究

祝凯，杨健，王睿之

《世界钢铁》

2012

连铸中间包上水口及浸入式水口结瘤物分析

王睿之，杨健，职建军，祝凯

《宝钢技术》

2011

钢中微细夹杂物的评价方法

祝凯，杨健，王睿之，沈建国，杨振国

《冶金分析》

2007

莱钢5#方坯连铸机自动控制系统的设计和实现

吴兆成，李红，卞丽，杨健

《自动化技术与应用》

2006

方坯连铸二冷区用行波磁场电磁搅拌实验室模拟研究

杨健

《武汉科技大学》

2005

日本在软接触电磁连铸方面的最新研究进展

杨健，陈崇峰

《钢铁钒钛》

1998

LF熔渣发泡剂的使用

杨健，礼重超，李扬州，张晓玲，李茂林，宋国菊，陈书元，颜广庭，唐萍

《钢铁钒钛》

1990

熔渣下金属熔池流动现象的数学模拟

曲英，杨健，徐保美

《金属学报》

精选作品

期刊论文

汽车外板非稳态交接坯夹杂物含量与尺寸的分布

结晶器卷渣引起的电镀锌汽车外板表面条状缺陷解析

浸入式水口结构对窄薄断面结晶器流场、凝固和夹杂物捕获的影响

热变形行为对20MnCr5齿轮钢热轧棒材MnS夹杂物的影响

镁质与钙质中间包覆盖剂对连铸坯中大型夹杂物分布的影响

Ti/N比对Mg处理船板钢焊后第二相粒子及韧性的影响

大包换包对汽车外板连铸坯中夹杂物分布的影响

超低碳汽车外板连铸坯宽度方向上夹杂物分布

汽车外板非稳态换包坯中不同成分夹杂物的分布

利用大样电解分析碳钢中大型夹杂物的研究进展

锰硫比对20MnCr5齿轮钢热轧棒材夹杂物析出行为的影响

Multiphase Flow Behavior and Entrapment of Bubbles and Inclusions in Ultra Narrow and Thin Slab Continuous Casting Molds With Different Widths

Effect of Zr Addition on Microstructure, Crack, and Toughness in the Coarse-Grained Heat-Affected Zone of Mg-Treated Steel After High-Heat Input Welding

Multiparameter Optimization and Dephosphorization Capacity Evaluation of Converter Slag Based on Response Surface Methodology, Industrial, and Laboratory Experiments

Computational Insights Into the Influence of MgO and MnO on the Oxygen Network Structure and Transport Properties of the CaO‐SiO 2 ‐P 2 O 5 System

双渣法转炉炼钢

基于数理模拟与高温测速的浸入深度对结晶器流场的影响

Nb微合金齿轮钢晶粒长大行为与析出相的影响

特厚板坯厚度方向上夹杂物分布及中心裂纹形成机理

气幕挡墙和“V”形多孔挡墙对不规则三流中间包流场及温度场的影响

大包换包对汽车外板连铸坯中夹杂物含量和尺寸的影响

氧和硫含量对低碳钢炼钢连铸过程夹杂物演变的影响

A critical review of the challenges of developing continuous casting mold fluxes for high-Ti steels

Fracture mechanisms of CGHAZ for Mg and Ca–Mg deoxidized HSLA steels after HHIW based on microstructures, crack behaviors and mechanical properties

Insight into Cu on Precipitates, PAG Growth, and Impact Toughness of CGHAZ for Ca-Ti Deoxidized HSLA Steels After HHIW

Numerical Simulation of Mold Flux Entrapment in Slab CC Mold Under Double-Ruler EMBr Condition Assisted with High-Temperature Quantitative Velocity Measurement

Effect of Cu on CGHAZ Low-Temperature Impact Toughness in Ca-Ti-Deoxidized HSLA Steels After HHIW: Insights from Inclusions, Microstructures, and Fracture Analysis

Insight into Ca Addition on Phase Transformation in CGHAZ of Mg Deoxidized Shipbuilding Steel Plates with In-situ Observation

Effect of Al content on nanoprecipitates, austenite grain growth and toughness in coarse-grained heat-affected zones of Al–Ti–Ca deoxidized shipbuilding steels

Influence of Hot Deformation on MnS Inclusions and the Composite Inclusions in 20MnCr5 Gear Steel Bars

Atomistic insights into the short- and medium-range structure and transport properties of EAF slag: The role of iron oxide

Effect of Zr addition on inclusions, micro-structures and toughness in the heat-affected zone of Mg deoxidised ship steel after high heat input welding

The effects of Ca content on intragranular acicular ferrite nucleation in the CGHAZ of Al-Ca-Ti deoxidised shipbuilding steel

Study on Mold Flux Entrapment by Numerical Simulation, Water Modeling, and High‐Temperature Quantitative Velocity Measurement

Deeply understanding the physicochemical properties of LCDSP slag from atomic structure to macroscopic properties: A blueprint for the green and low-carbon steelmaking process

Numerical Simulation of the Flow Field and Inclusion Entrapment in Ultrawide Slab Continuous Casting Mold Combined with High‐Temperature Velocity Quantitative Measurement

Deterioration mechanism of impact toughness in the coarse-grained heat-affected zone of Ca-treated shipbuilding steel plate with high-Cr content

Effect of Holding Time on Prior Austenite Grain Sizes and TiN Particles in Mg-Treated Steels Used for HHIW at the High Temperature of 1350 °C

Numerical simulation of flow field in continuous casting slab mould under EMS conditions assisted with high-temperature quantitative velocity measurement

Effect of Ti/N Ratio on Inclusions, Microstructure, and Toughness of Heat-Affected Zone of Steel Plate After High Heat Input Welding with Ca Deoxidization

Influence of electromagnetic stirring on the flow field and argon bubble distribution in the continuous casting mold of slab based on high-temperature online measurement of flow velocity near the mold surface

超低碳IF钢冶炼过程炉渣对夹杂物控制研究进展

工业试验Mg脱氧HSLA钢CGHAZ的夹杂物、组织及韧性的特征分析

基于水模拟的控流装置对双流板坯中间包流场的影响

结晶器保护渣原渣形貌及连铸结团样矿相组织分析

基于数学物理模拟和高温测速的拉速对吹氩结晶器流场行为的影响

Prediction of BOF endpoint carbon content and temperature via CSSA-BP neural network model

Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements

Composition Engineering on the Structure and Transport Properties of CaO–SiO2–P2O5 System: A Computational Insight

Phosphorus Removal Properties of the Fe–C–Si–Mn–P–S Metallic Melts Based on the Atom–Molecule Coexistence Theory: Mutual Verification by Industrial and Laboratorial Experiments

Prediction of lime utilization ratio of dephosphorization in BOF steelmaking based on online sequential extreme learning machine with forgetting mechanism

Microstructure and Fracture Characteristics of HAZs of Ca- deoxidized Steel Plates with Different Ti/N Ratios After HHIW

Effect of Nb Content on the Abnormal Grain Growth in 20MnCr5 Hot‐Rolled Bar

Effect of Ca Addition on Inclusions, Microstructures, and Impact Toughness of Coarse‐Grained Heat‐Affected Zone After High‐Heat Input Welding in Mg‐Deoxidized Shipbuilding Steel Plates

Insight into the TiO2 on transport behavior and heat transfer of the CaO–SiO2–FeO–MgO system at different basicities: Molecular dynamics simulation and thermodynamics

Mathematical Modeling of Transient Submerged Entry Nozzle Clogging and Its Effect on Flow Field, Bubble Distribution and Interface Fluctuation in Slab Continuous Casting Mold

Comparison of the Flow Field in the Slab Continuous Casting Mold Between the Two- and Three-Hole Nozzles with High Temperature Quantitative Velocity Measurement and Numerical Simulation

Effect of Ti/N Ratio on TiN Particles, Microstructures, and Toughness of Heat‐Affected Zone After High Heat Input Welding of the Ca‐Treated Steel Plates

Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in Low‐Carbon Double Slag Converter Steelmaking Process with Industrial Experiments, Mineralogy, and Ion–molecule Coexistence Theory

Inclusions and microstructures in coarse-grained heat-affected zone of Al–Ti–Ca deoxidized shipbuilding steels with different Al contents after high-heat input welding

Dephosphorization Kinetics of Hot Metal at Low Slag Basicity and Low Temperature under the Different Fe2O3 Addition Amounts

Insight into the structure and transport properties of CaO-SiO2-P2O5 system during the phosphorus enrichment process: A molecular dynamics simulation

Numerical Simulation of Flow Field, Distribution of Bubbles, and Inclusions in Slab Continuous Casting Mold under Electromagnetic Braking Assisted with High‐Temperature Quantitative Velocity Measurement

Mg处理对厚板中第二相粒子、HAZ组织及韧性的影响

利用Ca、Zr和稀土的氧化物冶金技术最新进展

铝脱氧25Mn钢圆坯中夹杂物的分布规律

低硅钢种LF精炼控硅脱硫技术进展

State of the art in applications of machine learning in steelmaking process modeling

Numerical Simulation of Transient Submerged Entry Nozzle Clogging With Euler–Euler and Euler–Lagrange Frameworks

Characteristics of Inclusions and Microstructures Around Solidification Hook of Low-Carbon Steel Continuous Casting Slab

Phosphorus Enrichment Capacity of Calcium Silicates in Multiphase Dephosphorization Slag Based on Laboratory High Temperature Experiments and IMCT

Distribution of Large‐Size Inclusions in Transition Slabs for Automotive Exposed Panel Steel

Optimization of Port Angle for Narrow‐Width Mold Flow Field under High Casting Speed Based on Large Eddy Simulation and High‐Temperature Measurement of Velocity

Influence of Ti/N Ratio on Inclusions, Microstructures, and Toughness in Heat‐Affected Zone of Shipbuilding Steel Plates with Mg Deoxidation after High Heat Input Welding

Particles, Microstructures, and Impact Toughness of CGHAZ of Ca Deoxidation Shipbuilding Steel Plates with Different Nb Contents

Formation and Evolution Mechanism of the Inclusions of Al2O3·SiO2·CaO and Al2O3·SiO2·CaO·MgO in Seamless Steel Tube Steel

Effect of Al2O3 Inclusions or Mold Flux Particles on Their Surrounding Microstructures of Sliver Defects on the Surface of Automobile Exposed Panel

Influence of Ladle Exchange on Inclusions in Transition Slabs of Continuous Casting for Automotive Exposed Panel Steel