百晓学者学者目录

李传习

长沙理工大学桥梁工程安全控制教育部重点实验室

个人简介

李传习,男,1963年9月出生,工学博士,长沙理工大学二级教授、博士生导师,桥梁工程安全控制教育部重点实验室研究人员;研究方向包括桥梁计算理论与新材料新结构新技术、桥梁结构分析与施工控制、桥梁工程加固与智能维护;主持国家自然科学基金项目4项,长期从事特大跨度桥梁施工控制与架设技术、桥梁高性能材料及新结构研发应用。

精选作品

期刊论文

  1. 李传习,胡皓智,施宇,汪继平(2026). 钢板约束UHPC中PBL纵向抗剪性能试验与承载能力计算方法研究. 《中国公路学报》.DOI
  2. 李兆辉,李传习,施宇(2026). 混合梁钢-UHPC结合段结构分析及设置优化. 《交通科学与工程》.
  3. Chuanxi Li, Jian-Feng Li, Shuai Deng, Zhenhai Zeng, Jinshi Dong (2026). Lower-carbon UHPC incorporating gold tailings and coal gangue ceramsite: strength, shrinkage, and environmental performance. Low-carbon Materials and Green Construction.DOI
  4. Chuanxi Li, Yu Shi, Long-Fei He (2026). Group studs in steel-UHPC joints: Shear capacity and reduction factor. Structures.DOI
  5. 张玉平,李思阳,李传习,杨胜江(2025). 基于气象参数的钢箱梁竖向温度梯度模式. 《公路交通科技》.
  6. 卿双全,李传习(2025). 基于正交试验的高强高延性混凝土力学性能. 《工业建筑》.
  7. 吴玉贤,李传习(2025). 无横梁人字形索塔临时横撑的合理设置方案. 《中外公路》.DOI
  8. 冯峥,胡宇河,王淏,黄俊宇,胡瑛莉,李传习(2025). 超高性能混凝土(UHPC)构件直剪性能研究综述. 《交通科学与工程》.DOI
  9. 张玉平,谭理,李传习,贺龙飞,施宇,潘仁胜(2025). 带PBL剪力键的钢-UHPC组合桥面板横桥向负弯性能. 《长安大学学报(自然科学版)》.
  10. 董创文,胡徉,李传习(2025). 基于梁格法宽幅双层钢桁梁有限元分析. 《重庆建筑》.
  11. 贺龙飞,谭珂,李传习,张永明,施宇,杨腾宇,裴必达(2025). 平钢板-UHPC组合桥面板负弯矩区超高周疲劳性能. 《工程力学》.
  12. Shuangquan Qing, Chuanxi Li (2025). Mechanical Properties of HS⁃HDC Based on Orthogonal Tests. Industrial Construction.DOI
  13. Chuanxi Li, Sai Yang, Haichun Li, Long-Fei He, Yuhang Xia, Jian Jiang (2025). Impact Resistance Research and Performance Characterization of Hybrid Fiber–Reinforced UHPC in the Anchorage Zone of Bridge Expansion Joints. Journal of materials in civil engineering.DOI
  14. Yonghao Chu, Yu-Ping Zhang, Chuanxi Li, Junliang Xie, Jiaping Jiang, Xing-yu Tang (2025). Solar-induced thermal effects on steel-concrete composite beams: A meteorological data-driven analysis for long-span bridges. Advances in Engineering Software.DOI
  15. Chuanxi Li, Long-Fei He, Jijun Wei, Yu Shi (2025). Post-fatigue residual mechanical performance of steel-UHPC composite decks under negative moment. Journal of constructional steel research.DOI
  16. Chuanxi Li, Siyang Li, Jun He, Yu-Ping Zhang, Jiale Zhou, Haichun Li (2025). Multi-objective optimization design of steel-UHPC composite slab. Structures.DOI
  17. Chuanxi Li, Yue Yao, Zhendong Li, Bo-Hai Ji (2025). Study on the Impact of Diaphragm Deformation on Fatigue Performance and Maintenance Strategies in Steel Bridge Decks. Applied Sciences.DOI
  18. Xinyu Yao, Chuanxi Li (2025). Synchronous Multi-Span Closure Techniques in Continuous Rigid-Frame Bridges: Research and Implementation. Buildings.DOI
  19. 李传习,司睹英胡,高有为(2024). 极端湿热环境对CFRP/钢界面性能的影响. 《建筑材料学报》.
  20. 柯璐,李友林,李传习,陈正,陈爱龙,冯鹏(2024). 冷扩止裂孔修复含Ⅰ型裂纹钢板的疲劳性能试验. 《中国公路学报》.
  21. 李传习,高有为,王孝耀,李游,司睹英胡(2024). 高低温下高性能环氧胶黏剂的制备. 《建筑材料学报》.
  22. 李传习,高有为,王孝耀,李游,司睹英胡(2024). 自研高性能胶胶粘CFRP-钢界面性能的温度影响机制. 《复合材料学报》.
  23. 蒋健,李传习,邓帅,司睹英胡,杨赛(2024). 含粗骨料超高性能混凝土静态稳定性研究. 《硅酸盐通报》.
  24. 刘高成,刘建,董创文,李传习(2024). 参照多尺度模型的钢桁梁节点刚域优化. 《中外公路》.
  25. 董创文,洪志鑫,李传习(2024). 基于正交试验法的主索鞍合理结构优化研究. 《湖南交通科技》.
  26. 刘唐慧,李传习(2024). 基于GA-BP神经网络的锚碇混凝土热学参数反演. 《湖南交通科技》.
  27. 贺君,滕强,奉思东,李传习(2024). 可更换波形钢腹板连梁低周反复加载试验研究. 《交通科学与工程》.
  28. 李传习,肖和育,贺龙飞,施宇,冯浩轩,裴必达(2024). 平钢板-UHPC组合桥面板纵向抗负弯性能试验研究. 《工程力学》.
  29. 冯浩轩,裴必达,李传习(2024). 钢箱拱桥斜拉扣挂施工法拆索工序研究. 《交通科学与工程》.
  30. 卿双全,邓帅,李传习(2024). 掺煤矸石粉高强高延性混凝土的力学与流变性能研究. 《混凝土与水泥制品》.
  31. Shuangquan Qing, Chuanxi Li (2024). The Influence and Mechanism of Polyethylene Fiber Characteristics on the Mechanical Properties of High-Strength Engineered Cementitious Composites. Journal of materials engineering and performance (Print).DOI
  32. Shuangquan Qing, Chuanxi Li (2024). Mechanical properties and cracking strength estimation of high-strength engineered cementitious composites considering the fracture process zone of the matrix. Theoretical and applied fracture mechanics (Print).DOI
  33. Shuangquan Qing, Chuanxi Li (2024). Data-driven prediction on critical mechanical properties of engineered cementitious composites based on machine learning. Scientific Reports.DOI
  34. Chuanxi Li, Long-Fei He, B. Pei, Ren-Sheng Pan, Yu Shi (2024). Fatigue behavior and damage mechanism of steel plate-UHPC composite bridge deck subjected to negative bending moment. Structures.DOI
  35. Chuanxi Li, Bo-Hai Ji, Yue Yao (2024). Critical distance-based probabilistic fatigue analysis of base-material notches in steel bridges considering size effect. Construction and Building Materials.DOI
  36. Chuanxi Li, Bo-Hai Ji, Yue Yao (2024). Stress biaxiality-based residual stress assessment in welded T-joints using the blind-hole method. Journal of constructional steel research.DOI
  37. Chuanxi Li, Bo-Hai Ji, Qiu-Dong Wang, Yue Yao (2024). Critical distance-based fatigue evaluation of welded joints in steel bridge under bending loading. Engineering Failure Analysis.DOI
  38. Shuangquan Qing, Chuanxi Li (2024). Mechanical properties and microstructure of low carbon high-strength engineered cementitious composites with supplementary cementitious material. Case Studies in Construction Materials.DOI
  39. H. Y. Li, Chuanxi Li, Yumei Wen, Zijian Zhu, Jiahao Peng, Siyang Li, Zheng Feng (2024). Experimental investigation on bond performance of UHPFRC wet joint by direct tension test. Materials and Structures.DOI
  40. Xinyu Yao, Chuanxi Li, Longlin Wang, Mengsheng Yu, Xiaoli Zhuo, Tianzhi Hao, Xirui Wang (2024). A Practical Approach to Alignment and Error Feedback Control for Long-Span Arch Bridges. Buildings.DOI
  41. Chuanxi Li, Yu Shi, Heyu Xiao, Li Tan, Longfei He (2024). Experimental and numerical investigation on flexural behavior of steel-UHPC composite slabs with PBL shear connectors. Journal of Building Engineering.DOI
  42. You Li, You Li, Hongyi Li, Hongyi Li, Xiaowan Ma, Hui Ming Zheng, Zhaochao Li, Chuanxi Li, Chuanxi Li, Zhaochao Li (2024). Influence of elevated temperatures on the bond performance of CFRP-steel lap joints bonded by nanosilica-modified adhesive with mixed curing agents. Construction and Building Materials.DOI
  43. 李传习,王圣杰,夏雨航,张怀宇,廖小平,黄大成(2023). 硅烷改性超高性能混凝土的流变性和强度. 《硅酸盐学报》.
  44. 潘仁胜,邹嘉瑶,廖鹏,李传习(2023). 螺旋肋GFRP筋与UHPC黏结强度试验及计算方法. 《中国公路学报》.
  45. 张玉平,李传习,曾有艺,李红利,刘小燕(2023). 桥梁工程课程思政建设的“五融入”教学范式. 《高教学刊》.
  46. 柯璐,朱夫瑞,李传习,陈正,张清华(2023). CFRP板-钢黏结界面的疲劳性能. 《建筑材料学报》.
  47. 李游,李洪仪,马小琬,李传习,李兆超,郑辉,宾佳(2023). 高温对基于研发胶黏剂的CFRP板-钢板搭接界面力学性能的影响. 《复合材料学报》.
  48. 王圣杰,李兵,李传习,孙迎春,杨腾宇(2023). 超高性能混凝土流动性与流变性关系. 《硅酸盐学报》.
  49. 柯璐,于硕,李传习,周佳乐,裴必达,朱星畅(2023). 弯剪扭荷载下配筋UHPC矩形梁的扭转性能与承载力计算. 《中国公路学报》.
  50. 李传习,方昌乐,张永明,谭珂,舒本安,施宇,罗滋润(2023). 新型组合桥面板UHPC收缩效应足尺试验. 《中国公路学报》.
  51. 李传习,鄢亦斌,高有为,李御航,司睹英胡(2023). CFRP板及其浸渍胶性能的纳米增韧剂影响研究. 《交通科学与工程》.
  52. 陈卓异,谭胜,李传习,彭彦泽(2023). 超声智能识别CFRP-钢界面缺陷研究. 《交通科学与工程》.
  53. 李传习,夏雨航,王圣杰,邓帅,蒋健(2023). 初凝超30 min超早强UHPC制备及其机理. 《硅酸盐通报》.
  54. Li-Xin Tan, Jun Yang, Chuanxi Li, Gao-Zhan Zhang, Q. Ding, Dao-Sheng Sun, Yongyuan Zhang (2023). Effect of Polyoxymethylene Fiber on the Mechanical Properties and Abrasion Resistance of Ultra-High-Performance Concrete. Materials.DOI
  55. Chuanxi Li, Yu Shi, Jiale Zhou, Changle Fang, Jun He, Long-Fei He (2023). Experimental investigation on UHPC shrinkage of full-scale steel-UHPC composite bridge deck. Developments in the Built Environment.DOI
  56. Chuanxi Li, Bo-Hai Ji, Zhong-Qiu Fu, Yue Yao (2023). Stress Concentration Factor-Based Hot-Spot Stress Prediction Model for the Web-Gap Weld of Main Girder in Steel Truss Bridge. KSCE Journal of Civil Engineering.DOI
  57. Youwei Gao, Chuanxi Li, Yibin Yan, You Li, Xiaoyao Wang (2023). Enhancing tensile performance and CFRP/steel interface properties of CFRP plates with nano-SiO2 and MWCNTs. Construction and Building Materials.DOI
  58. You Li, Xiaowan Ma, Hongyi Li, Chuanxi Li, Zheng Hu, Chuanxi Li (2023). Experimental study on flexural and interfacial shear properties of the steel-UHPC glued composite deck. Engineering Structures.DOI
  59. Chuanxi Li, Haichun Li, Haichun Li, Zheng Feng, Lu Ke, Jiale Zhou, Shuo Yu (2023). Local compression behavior of UHPFRC: Experiments and bearing capacity calculation model. Engineering Structures.DOI
  60. Rensheng Pan, Weiwei He, Lingxiao Cheng, Miao Su, Chuanxi Li (2023). Experimental investigation on the shear performance of UHPC large-keyed epoxy joints subjected to direct shear loading. Structures.DOI
  61. Zhuoyi Chen, Shengqi Wang, Zhenhai Zeng, Chuanxi Li (2023). An Experimental Study on the Flexural Performance of a Steel-ECC Composite Bridge Deck Sheet in the Negative Moment Zone. Applied Sciences.DOI
  62. 高有为,李传习,司徒英胡(2022). 碳纤维复合材料/钢搭接形式对搭接接头性能的影响. 《湖南电力》.
  63. 陈卓异,彭岚,李传习,彭彦泽(2022). CFRP全覆盖胶粘加固含中心裂纹钢板的静力性能. 《复合材料学报》.
  64. 付果,王磊,陈伏彬,李传习(2022). 土木工程大学生创新创业教育中心建设实践研究. 《中国建设教育》.
  65. 李传习,刘一鸣,李游,鄢亦斌(2022). 湿热对胶黏剂及CFRP-钢接头力学性能的影响. 《交通科学与工程》.
  66. 许博,李传习(2022). 基于灰色理论的大跨度钢管混凝土拱桥承载能力检测方法. 《吉林大学学报(工学版)》.
  67. 许博,李传习,何颖(2022). 双掺粉煤灰和粉状高炉矿渣的自密实混凝土流变性能的研究. 《混凝土》.
  68. 吴善友,郭立成,李传习,曾国东,潘仁胜,李积泉(2022). 钢-UHPC桥面板湿接缝负弯矩试验研究. 《交通科学与工程》.
  69. 梁睿,李传习,聂洁,李海春,刘高成,王圣杰(2022). 混杂纤维超高性能混凝土断裂性能研究. 《交通科学与工程》.
  70. Yijie Huang, Tongchen Wang, Hongli Sun, Chuanxi Li, L. Yin, Qing Wang (2022). Mechanical properties of fibre reinforced seawater sea-sand recycled aggregate concrete under axial compression. Construction and Building Materials.DOI
  71. Zheng Feng, Chuanxi Li, Lu Ke, Doo‐Yeol Yoo (2022). Tensile behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) structure with cold joints. Engineering Structures.DOI
  72. Rensheng Pan, Peng Liao, Jiayao Zou, Xuan Zhou, Chuanxi Li (2022). Experimental investigation on bond performance of helically ribbed GFRP rebar embedded in Ultra-high performance concrete. Construction and Building Materials.DOI
  73. Zheng Feng, Chuanxi Li, Lu Ke, Doo‐Yeol Yoo (2022). Experimental and numerical investigations on flexural performance of ultra-high-performance concrete (UHPC) beams with wet joints. Structures.DOI
  74. Jiale Zhou, Chuanxi Li, Doo‐Yeol Yoo, Jun He, Zheng Feng (2022). Modified softened membrane model for ultra-high-performance fiber-reinforced concrete solid and hollow beams under pure torsion. Engineering Structures.DOI
  75. Yan Liu, Zhuoyi Chen, Jianbo Zeng, Chuanxi Li, Hui Hua Peng, Youwei Gao (2022). Study of Secondary Effects of Fatigue Cracks in Cross Partitions of Steel Plate Reinforced Steel Box Girders. Applied Sciences.DOI
  76. Rensheng Pan, Weiwei He, Lingxiao Cheng, Chuanxi Li (2022). Direct Shear Strength of UHPC Large-Keyed Epoxy Joint: Theoretical Model and Experimental Verification. Journal of Bridge Engineering.DOI
  77. Chuanxi Li, Jiale Zhou, Lu Ke, Shuo Yu, Haichun Li (2022). Failure mechanisms and loading capacity prediction for rectangular UHPC beams under pure torsion. Engineering Structures.DOI
  78. Jiejie Long, Chuanxi Li, You Li (2022). Enhancement of Mechanical and Bond Properties of Epoxy Adhesives Modified by SiO2 Nanoparticles with Active Groups. Polymers.DOI
  79. Zheng Feng, Chuanxi Li, Rensheng Pan, Doo‐Yeol Yoo, Jun He, Lu Ke (2022). Shear Capacity of Ultrahigh-Performance Concrete with Monolithic Interface and Wet-Joint Interface. Journal of Materials in Civil Engineering.DOI
  80. Jiale Zhou, Chuanxi Li, Zheng Feng, Doo‐Yeol Yoo (2022). Experimental investigation on torsional behaviors of ultra-high-performance fiber-reinforced concrete hollow beams. Cement and Concrete Composites.DOI
  81. Zhenhai Zeng, Chuanxi Li, Shengqi Wang, Yan Liu, Zhuoyi Chen, Yigang Lv (2022). Study on Shear Performance of Short Bolt Interface in ECC–Steel Bridge Deck Composite Structure. Applied Sciences.DOI
  82. Zhenhai Zeng, Chuanxi Li, Zhuoyi Chen, Lu Ke (2022). Study on Mechanical Properties and Optimum Fiber Content for Basalt/Polyacrylonitrile Hybrid Fiber Reinforced Concrete. Advances in Materials Science and Engineering.DOI
  83. 李传习,柯璐,陈卓异,贺君,郭立成,焦阳(2021). 正交异性钢桥面板弧形切口及其CFRP补强的疲劳性能. 《中国公路学报》.DOI
  84. 陈卓异,李传习,柯璐,郭立成,宋钢兵(2021). 钢桥面板弧形切口疲劳裂纹切割修复与优化. 《中国公路学报》.DOI
  85. 冯峥,李传习,潘仁胜,周佳乐,柯璐,柯红军(2021). UHPC直剪性能试验与直剪承载力计算方法. 《中国公路学报》.DOI
  86. 李传习,李游,贺君,刘一鸣,彭彦泽(2021). 固化剂对室温胶黏CFRP板/钢板界面性能的影响. 《建筑材料学报》.
  87. 冯峥,李传习,李海春,周佳乐,潘仁胜,刘高成(2021). 超高性能混凝土湿接缝界面粘结性能. 《硅酸盐学报》.DOI
  88. 李传习,周佳乐,柯璐,方昌乐,施宇,潘仁胜(2021). 配筋UHPC矩形梁抗扭承载性能试验与计算方法. 《中国公路学报》.DOI
  89. 陈卓异,彭彦泽,李传习,郭靖(2021). 高温下双搭接钢-CFRP板胶粘界面力学性能试验. 《复合材料学报》.DOI
  90. 李游,李传习,郑辉,张海萍,刘方成(2021). 固化剂混掺对高温下CFRP板-钢板界面黏结性能的影响. 《复合材料学报》.DOI
  91. 张玉平,马超,李传习,高树威(2021). 基于均匀设计及BP神经网络的大体积混凝土热学参数反分析. 《土木与环境工程学报(中英文)》.
  92. 李传习,雷智杰,冯峥,何伟伟,谭理(2021). 轻量化STC-钢组合桥面板静力性能研究. 《交通科学与工程》.DOI
  93. 张玉平,马超,李传习,张亚昕(2021). 基于改进BP算法的混凝土热学参数反演与预测. 《交通科学与工程》.DOI
  94. AMOUSSOU Ekoe, 陈卓异, 李传习, EZOULA A.Solange(2021). 环境温度作用下地下主体结构水化热分析. 《交通科学与工程》.DOI
  95. 李传习,龙洁杰,李游,高有为(2021). 不同活性基团纳米SiO2环氧胶黏剂的力学性能. 《长安大学学报(自然科学版)》.DOI
  96. 潘仁胜,何伟伟,程灵霄,李传习(2021). UHPC大键齿干接缝直剪性能及尺寸参数分析. 《湖南大学学报(自然科学版)》.DOI
  97. 陈卓异,杨宇,李传习,曾振海,曾剑波(2021). 基于临界距离理论的弧形切口疲劳寿命研究. 《钢结构(中英文)》.DOI
  98. Bo Xu, Chuanxi Li, Yiqing Zhang (2021). Fuzzy comprehensive evaluation method for integral stability of box girder with corrugated steel webs. Journal of Computational Methods in Sciences and Engineering.DOI
  99. Zheng Feng, Chuanxi Li, Doo‐Yeol Yoo, Rensheng Pan, Jun He, Lu Ke (2021). Flexural and cracking behaviors of reinforced UHPC beams with various reinforcement ratios and fiber contents. Engineering Structures.DOI
  100. Zheng Feng, Chuanxi Li, Jun He, Lu Ke, Zhijie Lei, George Vasdravellis (2021). Static and fatigue test on lightweight UHPC-OSD composite bridge deck system subjected to hogging moment. Engineering Structures.DOI
  101. Lu Ke, Chuanxi Li, Jun He, Yongjun Lü, Yang Jiao, Yongming Liu (2021). Fatigue evaluation and CFRP strengthening of diaphragm cutouts in orthotropic steel decks. Steel and Composite Structures.DOI
  102. 李传习,冯峥,王文强,陈卓异,柯璐(2020). 栓接U肋钢箱梁考虑对接偏差的疲劳性能及改进方法研究. 《公路交通科技》.
  103. 李传习,曹先慧,柯璐,罗南海,郭立成(2020). 高温对结构加固用环氧黏结剂力学性能的影响. 《建筑材料学报》.
  104. 李传习,罗南海,柯璐,刘宇飞,郭靖(2020). 胶膜连接碳纤维增强树脂复合材料板-钢搭接接头室温条件的力学性能试验. 《复合材料学报》.DOI
  105. 陈卓异,贺君,李传习,张玉平(2020). 互动学习在《土木工程概论》网络课堂中的应用. 《科技风》.DOI
  106. 李传习,李游,高有为,胡正,刘一鸣(2020). 纳米SiO2质量分数对胶粘碳纤维增强树脂复合材料板-钢搭接界面黏结性能的影响. 《复合材料学报》.DOI
  107. 李传习,冯峥,郭立成,柯红军,刘科强(2020). 密集横隔板UHPC箱梁锚固区局部效应分析及配筋设计. 《公路交通科技》.
  108. 曾振海,李传习,柯璐,聂洁(2020). 玄武岩/聚丙烯腈混杂纤维混凝土力学性能及最优纤维掺量研究. 《铁道科学与工程学报》.DOI
  109. 吴湛,陈卓异,柯红军,李传习(2020). 非对称悬挂式轨道梁结构优化分析. 《中外公路》.DOI
  110. 段凯亮,李传习,张依濛(2020). T构悬臂施工温度场的测定及对主梁变形的影响与控制. 《公路与汽运》.
  111. 徐文豪,贺君,陈卓异,李传习,李向(2020). 波形钢腹板预弯组合梁承载性能影响因素分析. 《公路与汽运》.
  112. 李传习,胡正,李游,柯璐(2020). 钢-超高性能混凝土胶接组合板受弯的界面性能. 《交通科学与工程》.DOI
  113. 李传习,高有为,李游,刘宇飞(2020). 纳米材料胶粘剂胶体拉伸性能与微观结构. 《交通科学与工程》.DOI
  114. 王鹏程,李传习,张若钢,周绍豪,郑俊博(2020). 高性能混凝土徐变系数指数函数模型. 《混凝土》.
  115. 陈卓异,熊永明,李传习(2020). 正交异性钢桥面板横隔板弧形切口切割残余应力分析. 《桥梁建设》.
  116. 张玉平,刘雪松,李传习(2020). 基于MOPSO算法的斜拉桥索力优化分析. 《土木与环境工程学报(中英文)》.
  117. 李传习,聂洁,潘仁胜,石家宽,曾宇环,贺君(2020). 水胶比对超高性能混凝土施工与力学性能的影响. 《土木与环境工程学报(中英文)》.
  118. 张玉平,高树威,李传习,温东昌(2020). 基于钢纤维混凝土弹塑性损伤模型的钢混结合段吊装分析. 《长沙理工大学学报(自然科学版)》.
  119. 李游,李传习,陈卓异,贺君,邓扬(2020). 基于监测数据的钢箱梁U肋细节疲劳可靠性分析. 《工程力学》.
  120. 冯峥,李传习,潘仁胜,刘科强,聂洁(2020). 密集横隔板UHPC箱梁锚固区局部承压性能研究. 《工程力学》.
  121. 刘宇飞,李传习,于孟生,王华,王龙林(2020). 大跨拱桥拱肋拼装温差效应分析及控制方法. 《交通科学与工程》.
  122. Yongming Xiong, Chuanxi Li, Zhuoyi Chen, Jun He, Haohui Xin (2020). The Evolution of Residual Stress in Rib-Diaphragm Joints of Orthotropic Steel Decks Subjected to Thermal Cutting and Welding. Materials.DOI
  123. Jun He, Xiang Li, Chuanxi Li, José A.F.O. Correia, Haohui Xin, Man Zhou (2020). A novel asynchronous-pouring-construction technology for prestressed concrete box girder bridges with corrugated steel webs. Structures.DOI
  124. Zhuo-Yi Chen, Chuanxi Li, Jun He, Haohui Xin (2020). Retrofit Fatigue Cracked Diaphragm Cutouts Using Improved Geometry in Orthotropic Steel Decks. Applied Sciences.DOI
  125. Lu Ke, Chuanxi Li, Jun He, Qiang Shen, Yongming Liu, Yang Jiao (2020). Enhancing fatigue performance of damaged metallic structures by bonded CFRP patches considering temperature effects. Materials & Design.DOI
  126. Chuanxi Li, Zheng Feng, Rensheng Pan, Lu Ke, Jun He, Shuai Dong (2020). Experimental and Numerical Investigation on the Anchorage Zone of Prestressed UHPC Box-Girder Bridge. Journal of Bridge Engineering.DOI
  127. Lu Ke, Chuanxi Li, Jun He, Zhuoyi Chen, Zheng Feng (2020). Mechanisms and Countermeasures for Cracking in PC Box Girder Bridges Constructed by Movable Scaffolding System. Structural Engineering International.DOI
  128. You Li, Chuanxi Li, Jun He, Youwei Gao, Zheng Hu (2020). Effect of functionalized nano-SiO2 addition on bond behavior of adhesively bonded CFRP-steel double-lap joint. Construction and Building Materials.DOI
  129. 陈卓异,李传习,张玉平,柯红军(2019). 国际化新形势下《土木工程概论》双语教学定位初探. 《科技风》.DOI
  130. 陈卓异,李传习,张玉平,柯红军(2019). 《土木工程概论》双语课程的多层次评价体系探讨. 《科技风》.DOI
  131. 陈卓异,李传习,张玉平,柯红军(2019). 土木工程概论“1+N+1”双语教学模式研究. 《科技视界》.DOI
  132. 李传习,陈卓,董创文,李涛(2019). 横向四滑道步履式顶推宽幅钢箱梁局部应力分析. 《公路交通科技》.
  133. 李传习,李游,陈卓异,贺君,刘一鸣(2019). 基于实测车流的钢箱梁横隔板疲劳特性. 《长安大学学报(自然科学版)》.DOI
  134. 李传习,李游,高辰,曾宇环,吴湛,叶龙祥(2019). 悬索桥钢丝绳空间主缆扭转性能试验. 《长安大学学报(自然科学版)》.DOI
  135. 李传习,聂洁,石家宽,曾宇环(2019). 纤维类型对混凝土抗压强度和弯曲韧性的增强效应及变异性的影响. 《土木与环境工程学报(中英文)》.
  136. 谭立心,李传习(2019). 虎门二桥坭洲水道桥近塔区无吊索钢箱梁临时支承体系设计. 《世界桥梁》.
  137. 李传习,熊永明,陈卓异,柯璐,宋钢兵(2019). 钢箱梁横隔板-U肋交接处割焊残余应力分析. 《桥梁建设》.
  138. 曾宇环,聂洁,李传习,石家宽(2019). 三元纤维混掺增强高性能混凝土弯曲韧性及评价方法. 《硅酸盐通报》.DOI
  139. 李传习,石家宽,聂洁,曾宇环(2019). 平直型钢纤维掺量与长径比对超高性能混凝土性能的影响. 《硅酸盐通报》.DOI
  140. Lu Ke, Chuanxi Li, Jun He, Shuai Dong, Can Chen, Yang Jiao (2019). Effects of elevated temperatures on mechanical behavior of epoxy adhesives and CFRP-steel hybrid joints. Composite Structures.DOI
  141. Jun He, Sihao Wang, Yuqing Liu, Liang Dai, Zhan Lyu, Chuanxi Li, Haohui Xin, Chao Tan (2019). The development of composite bridges with corrugated steel webs in China. Proceedings of the Institution of Civil Engineers - Bridge Engineering.DOI
  142. Chuanxi Li, Zheng Feng, Lu Ke, Rensheng Pan, Jie Nie (2019). Experimental Study on Shear Performance of Cast-In-Place Ultra-High Performance Concrete Structures. Materials.DOI
  143. Xinzhong Wang, Jun He, Ayman S. Mosallam, Chuanxi Li, Haohui Xin (2019). The Effects of Fiber Length and Volume on Material Properties and Crack Resistance of Basalt Fiber Reinforced Concrete (BFRC). Advances in Materials Science and Engineering.DOI
  144. Lu Ke, Chuanxi Li, Nanhai Luo, Jun He, Yang Jiao, Yongming Liu (2019). Enhanced comprehensive performance of bonding interface between CFRP and steel by a novel film adhesive. Composite Structures.DOI
  145. Chuanxi Li, You Li, Jun He (2019). Experimental study on torsional behavior of spatial main cable for a self-anchored suspension bridge. Advances in Structural Engineering.DOI
  146. Jun He, Chuanxi Li, Hongjun Ke, Yang Liu, Yuping Zhang, Chuangwen Dong, Hongli Li, Zhe Zhang (2019). A Simplified Calculation Method of Length Adjustment of Datum Strand for the Main Cable with Small Sag. Advances in Civil Engineering.DOI
  147. 陈卓异,李传习,黄侨,贺君,李游(2018). 波形钢腹板组合T梁静力性能试验. 《中国公路学报》.
  148. 贺君,VASDRAVELLIS George,王思豪,刘玉擎,李传习(2018). 新型可拆卸开孔钢管连接件抗剪性能. 《中国公路学报》.
  149. 李传习,柯璐,陈卓异,贺君,罗南海(2018). CFRP-钢界面粘结性能试验与数值模拟. 《复合材料学报》.
  150. 李传习,周群,董创文(2018). 顶推钢箱梁的梁段制造构形与无应力线形实现. 《公路交通科技》.
  151. Chuanxi Li, Lu Ke, Jun He, Zhuoyi Chen, Yang Jiao (2018). Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures. Composite Structures.DOI
  152. Peng Yuan, C. S. Steve Cai, Dejian Li, Guoji Xu, Chuanxi Li (2018). A novel method for determining the spatial responses of a cable-stayed bridge with four cable-planes. Engineering Structures.DOI
  153. Chuanxi Li, Jun He, Zhe Zhang, Yang Liu, Hongjun Ke, Chuangwen Dong, Hongli Li (2018). An Improved Analytical Algorithm on Main Cable System of Suspension Bridge. Applied Sciences.DOI
  154. Hanbin Yi, Chuanxi Li, Li Dai (2018). Experimental Study on the Shear Performance of Shallow Hinge Joints for Prefabricated Hollow Slab Bridges. Advances in Civil Engineering.DOI
  155. Jun He, Chuanxi Li, Chao Tan, Xiaodong Dai, Sihao Wang, Yuqing Liu (2018). Elastic torsional rigidity of multi-cell box girders with corrugated steel webs. Report.DOI
  156. 贺君,李传习,李红利(2017). 来华留学生《桥梁工程》课程教学实践与探索. 《教育教学论坛》.
  157. 李斌,李传习(2017). 多处局部损伤钢压杆经纤维复合材料加固后的抗屈曲性能. 《工业建筑》.
  158. 贺君,王思豪,刘玉擎,金文刚,李传习,邓治国(2017). 波形钢腹板与混凝土底板连接构造受剪承载力研究. 《建筑结构学报》.DOI
  159. 李传习,李游,陈卓异,柯璐(2017). 钢箱梁横隔板疲劳开裂原因及补强细节研究. 《中国公路学报》.
  160. 贺君,刘玉擎,吕展,李传习(2017). 波形钢腹板内衬混凝土组合梁弯、剪性能试验. 《中国公路学报》.
  161. Sihao Wang, Jun He, Yuqing Liu, Chuanxi Li, Haohui Xin (2017). Shear capacity of a novel joint between corrugated steel web and concrete lower slab. Construction and Building Materials.DOI
  162. Jun He, Sihao Wang, Yuqing Liu, Zhan Lyu, Chuanxi Li (2017). Mechanical Behavior of a Partially Encased Composite Girder with Corrugated Steel Web: Interaction of Shear and Bending. Engineering.DOI
  163. Zhuoyi Chen, Chuanxi Li, Lu Ke, Yongming Liu, Jiqiao Lin (2017). Study on fatigue damages and retrofit methods of steel box girder in a suspension bridge. Tumu Gongcheng Xuebao.
  164. Wang Xinzhong, Chuanxi Li, Wei Hong Zhou, Xie Heliang (2017). Experimental Study on the Axial Compression of Short Basalt Fiber Reinforced Concrete Columns with Spiral Stirrups. Journal of Engineering Science and Technology Review.DOI
  165. 张玉平,谢文昌,李传习(2016). 无铺装层PK断面混凝土梁日照温度场分析. 《公路交通科技》.
  166. 袁鹏,李德建,陆尧,李传习(2016). 复杂轨道高程误差下钢箱梁滑移受力敏感性研究. 《铁道科学与工程学报》.
  167. 贺君,刘玉擎,李传习,张玉平(2016). 钢-混凝土组合简支梁桥温度影响因素及分布模式. 《公路交通科技》.
  168. Hong Wang, Chuanxi Li, Zhou Wei (2016). Experimental Study on the Ultimate Bearing Capacity of Long Basalt Fiber - Reinforced Concrete (BFRC) - Filled Steel Tube Columns under Axial Compression. Journal of Engineering Science and Technology Review.DOI
  169. Wen-chang Xie, Yuping Zhang, Chuanxi Li (2016). Analysis of the Temperature Field of a PK Section Concrete Girder without Pavement Caused by Solar Radiation. Journal of Highway and Transportation Research and Development (English Edition).DOI
  170. Zhuoyi Chen, Chuanxi Li, Lu Ke (2016). Fatigue cracks and stress amplitude analysis of orthotropic steel deck in a suspension bridge. International Conference on Sustainable Energy and Environment Engineering (ICSEEE).DOI
  171. 刘建,桂勋,李传习(2015). 基于健康监测的自锚式悬索桥钢箱梁细节疲劳可靠度研究. 《公路交通科技》.
  172. 张玉平,袁鹏,罗超云,李传习,谭立心(2014). 嘉绍大桥钢箱梁施工过程中局部稳定及强度分析. 《公路交通科技》.
  173. 李传习,王琛,董创文,李红利(2014). 基于相位变换的顶推曲梁桥自适应无应力构形控制. 《中国公路学报》.
  174. Chuanxi Li, Jun He, Chuangwen Dong, Hongli Li (2014). Control of Self-Adaptive Unstressed Configuration for Incrementally Launched Girder Bridges. Journal of Bridge Engineering.DOI
  175. Chuanxi Li (2013). The research and application of vibration frequency method in cable force testing. Shanxi Architecture.
  176. 刘建,李传习,侯攀,王星华(2012). 基于数据变化率的桥梁健康监测数据失真识别算法. 《公路交通科技》.
  177. 董创文,廖龙辉,李传习,曹珊珊(2012). 猛洞河大桥斜拉扣挂方案的确定与优化. 《公路交通科技》.
  178. Guiyun Xia, Chuanxi Li, Qingyuan Zeng (2012). Flexure Analysis and Parameter Optimization of Light Type Abutment in Self-plane. Journal of Highway and Transportation Research and Development (English Edition).DOI
  179. 夏桂云,李传习,张建仁(2011). 考虑水平摩阻和双重剪切的弹性地基梁分析. 《土木工程学报》.
  180. 王雷,李传习(2011). 索单元结构计算的内力全量迭代法. 《公路交通科技》.
  181. Xinzhong Wang, Chuanxi Li (2011). GPS displacement monitoring system of Pingsheng Bridge. International Conference on Electrical and Control Engineering.DOI
  182. Xinzhong Wang, Chuanxi Li (2011). Design of health monitoring displacement alarm value of Pingsheng Bridge tower with consideration on environment condition.DOI
  183. Chuangwen Dong, Chuanxi Li (2011). Launching Construction of the Deck of the Hangzhou Jiangdong Bridge.DOI
  184. Chuanxi Li, Bin Li, Cheng-Long Wei, Jian Zhang (2011). 3-Bar Simulation-Transfer Matrix Method for Shear Lag Analysis. Procedia Engineering.DOI
  185. Chuanxi Li (2011). ANALYSIS ON FLEXUAL BEHAVIOR OF SEGMENTAL EXTERNALLY PRE-STRESSED CONCRETE BEAMS. Engineering Mechanics.
  186. 张建仁,李传习,杨美良,刘小燕(2010). 结构设计原理课程教学团队建设的改革与实践. 《高等学校土木工程专业建设的研究与实践——第十届全国高校土木工程学院(系)院长(主任)工作研讨会论文集》.
  187. 夏桂云,李传习,曾庆元(2010). 轻型桥台自身平面内的弯曲分析与参数的合理取值. 《公路交通科技》.
  188. 徐君伟,李传习(2010). 佛山平胜自锚式悬索桥车桥系统振动分析. 《公路》.
  189. 董创文,李传习(2010). 连续梁顶推导梁合理参数的确定方法. 《公路交通科技》.
  190. 徐君伟,李传习(2010). 自锚式悬索桥车桥振动分析. 《交通科技》.
  191. Chuanxi Li (2010). Method for Determination of Reasonable Parameters of Launching Nose for Continuous Beam. Journal of Highway and Transportation Research and Development.
  192. Chuanxi Li (2010). Vibrating frequencies and vehicle-bridge vibration of simply-supported skewed slab. Journal of Transport Science and Engineering.
  193. 柯红军,李传习,刘建(2009). 平胜大桥自锚式悬索桥静载试验与评价. 《公路交通科技》.
  194. 张玉平,李传习(2009). 斜拉桥单箱三室主梁剪力滞效应研究. 《公路交通科技(应用技术版)》.
  195. 彭晖,尚守平,张建仁,李传习(2009). 预应力碳纤维板加固T梁的试验与理论研究. 《公路交通科技》.
  196. 张玉平,李传习(2009). 比较教学法在《桥梁工程》教学中的应用. 《科技信息》.
  197. 曾永革,李传习(2009). 钢筋混凝土梁单元截面刚度求解方法. 《铁道科学与工程学报》.
  198. 夏桂云,俞茂宏,李传习,张建仁(2009). 斜桥动力特性. 《交通运输工程学报》.
  199. 李传习,姚明,柯红军(2009). 空间缆索悬索桥倾斜母线索鞍设计位置的计算方法. 《中国公路学报》.
  200. Chuanxi Li (2009). Calculating methods for section rigidity of reinforced concrete beam element. Journal of Railway Science and Engineering.
  201. 李传习,曾革助,刘扬(2008). 支架现浇的异型系杆拱桥合理施工状态的确定. 《公路交通科技》.
  202. 张玉平,李传习,谢建湘(2008). 结构横坡对斜拉桥箱梁剪力滞效应的影响. 《交通科技》.
  203. Chuanxi Li (2008). ANSYS-based Self-anchored Suspension Bridge FE Modelling and Analytic Method. Computer Communications.
  204. Chuanxi Li (2008). Numerical simulation analysis of dynamical performance of anti-collision equipment of Lie-de bridge. Journal of Changsha University of Science & Technology.
  205. Chuanxi Li (2007). The stress monitoring of the main beam section of Jianning Bridge in Zhuzhou while being constructed. Journal of Changsha University of Science & Technology.
  206. 柯红军,李传习,李德慧(2006). 钢筋混凝土空间梁单元截面刚度计算的Cranston方法应用探讨. 《公路交通科技》.
  207. 杨美良,张建仁,李传习(2006). 既有桥梁钢结构构件的检算与加固研究. 《公路交通科技》.
  208. Jianren Zhang, Chuanxi Li, Feihong Xu, Xiaoming Yu (2006). Test and Analysis for Ultimate Load-Carrying Capacity of Existing Reinforced Concrete Arch Ribs. Journal of Bridge Engineering.DOI
  209. Chuanxi Li (2006). Study on Check of Existing Steel Structure and Bridge Strengthening. Journal of Highway and Transportation Research and Development.
  210. 李传习,王雷,刘光栋,陈明宪,肖勇刚(2005). 悬索桥索鞍位置的分离计算法. 《中国公路学报》.
  211. 夏桂云,曾庆元,李传习,张建仁(2004). 建立Timoshenko深梁单元的新方法. 《交通运输工程学报》.
  212. 刘扬,张建仁,李传习(2004). 混凝土斜拉桥施工期的时变可靠度计算. 《中国公路学报》.
  213. Chuanxi Li (2004). Nonlinearity and Stability Analysis of Baiwang Bridge, Guangdong.
  214. 黄民元,李传习(2001). 体外预应力筋在桥梁工程中的应用. 《交通科学与工程》.
  215. 李传习,杨飞跃,张建仁(2000). 节段施工桥梁的徐变变形及内力重分布研究. 《中国公路学报》.
  216. 高幸,李传习(1997). 公路施工网络计划技术若干实用问题研究. 《系统工程理论与实践》, Vol. 17, No. 2.下载原文

预印本

  1. Zheng Feng, J.Y. Huang, Chuanxi Li, Lu Ke, Hao Wang, Hojin Lee (2025). Direct Shear Behavior Of Segmented Cast Keyed-Joint Uhpc Components: Effects of Interface Treatment Method And Shear Plane Height. SSRN Electronic Journal.DOI
  2. Lu Ke, Youlin Li, Chuanxi Li, Feng Zheng, Furui Zhu, Longming Liang, Shuyu Mei (2023). Experimental and Probabilistic Study of Fatigue Crack Growth Behavior of Steel Q345qc Under Different Stress Ratios. SSRN Electronic Journal.DOI

书籍章节

  1. Guiyun Xia, Mao-Hong Yu, Chuanxi Li, Jianren Zhang (2009). Rectangular Membrane Element with Rotational Degree of Freedom. Springer eBooks.DOI

此主页由公开资料整理,尚未经学者本人认领。