侯献军

期刊论文

1. Chu Chen, Xianjun Hou, Hua Jiang, Weiwei Guan, Kanjun Tan (2026). Molecular dynamics and experimental study on synergistic effect of silicon carbide nanoparticle size and concentration on enhancing thermal conductivity of composite nano-coolant. International Journal of Thermal Sciences.DOI
2. Haijun Liu, Xianjun Hou, Weiwei Guan, Youheng Wang, Xiaoxue Li, Hua Jiang, Mohamed Kamal Ahmed Ali, Liu Yue (2026). Study on the mechanism of enhanced tribological properties of graphene oxide nano-lubricants across a wide temperature range. Powder Technology.DOI
3. Heng An, Xianjun Hou, Kangjun Tan, Danjiao Zhao, Weiwei Guan (2026). Tribological synergy of carboxylic-acid-modified h-BN in polyalphaolefin under divergent contact regimes: Steel-steel versus alumina-steel. Tribology International.DOI
4. Xianjun Hou, Kangjun Tan, Chen Chu, Hua Jiang (2026). Improving heat transfer capability and thermal stability of polyalphaolefin introducing Fe3O4/CNTs hybrid nanomaterials. Case Studies in Thermal Engineering.DOI
5. 侯献军，余鸿，王友恒，管韦魏（2025）. 基于纳米冷却液的整车热管理性能研究. 《武汉理工大学学报》.
6. 侯献军，宋健，管韦魏，满兴家（2025）. 动力总成振动和表面辐射噪声预测与优化. 《武汉理工大学学报》.
7. 侯献军，邱姝燕，张纪欣，杜常清，刘志恩（2025）. 基于AMESim的混联式混动汽车热管理系统优化研究. 《武汉理工大学学报》.
8. Hua Jiang, Xianjun Hou, Chen Chu, Weiwei Guan, Bo Yi, Mohamed Kamal Ahmed Ali (2025). Wear Alleviation of Mechanical-Interface Introducing Composite Nanolubricants via Diffusion Effect and Atomic Disorder. Langmuir.DOI
9. Danjiao Zhao, Yu Wang, Weiwei Guan, Hua Jiang, Youheng Wang, Xianjun Hou (2025). Tribological application study of biomass-derived carbon microspheres in multi-matrix lubricants. Powder Technology.DOI
10. Weiwei Guan, Xianjun Hou, Fei Duan, Yuxin Ma, Mohamed Kamal Ahmed Ali (2025). Wettability influence on the lubrication performance of modified silver/carbon black nano additives. Tribology International.DOI
11. Xianjun Hou, Chu Chen, Hua Jiang, Weiwei Guan, Mohamed Kamal Ahmed Ali (2025). Revealing the thermal conductivity and viscosity mechanism of lubricating oil enhanced with nano-silicon carbide using molecular dynamics simulation. International Journal of Thermal Sciences.DOI
12. Weiwei Guan, Xianjun Hou, Youheng Wang, Chen Chu, Mohamed Kamal Ahmed Ali (2025). Interaction Lubrication Mechanism Between Nano-Biochar and Traditional Oil Additives Under Various Sliding Conditions. Lubricants.DOI
13. 侯献军，钱宇聪，江华，喻齐凡（2024）. 离子液体对WS2纳米润滑油摩擦学性能的影响. 《润滑与密封》.
14. 侯献军，安恒，江华（2024）. 纳米ZnO对正辛烷边界润滑摩擦特性的分子动力学研究. 《润滑与密封》.
15. 侯献军，张龙翔，王友恒，喻齐凡，江华（2024）. 改性生物炭作为聚α-烯烃添加剂的摩擦学性能研究. 《润滑与密封》.
16. Weiwei Guan, Xianjun Hou, Hua Jiang, Youheng Wang, Mohamed Kamal Ahmed Ali (2024). Experimental and molecular dynamics simulation study of the thermal conductivity mechanism of biolubricant-based functionalized silver/carbon black additives. International Journal of Heat and Mass Transfer.DOI
17. Youheng Wang, Xianjun Hou, Hong Yu, Weiwei Guan, Yuxin Ma, Mohamed Kamal Ahmed Ali (2024). Nano-Biochar Prepared from High-Pressure Homogenization Improves Thermal Conductivity of Ethylene Glycol-Based Coolant. Nanomaterials.DOI
18. Xianjun Hou, Heng An, Yuxin Ma, Chu Chen, Mohamed Kamal Ahmed Ali (2024). The effect of the number of branched hydrocarbon molecules on boundary lubrication of ZnO nanofluids by using molecular dynamics simulation. Materials Today Communications.DOI
19. Xianjun Hou, Weiwei Guan, Hua Jiang, Youheng Wang, Mohamed Kamal Ahmed Ali (2024). Improving physicochemical and tribological characteristics of bio-lubricants using carbon-based hybrid nanomaterials modified by tertiary-butyl-hydroquinone. Tribology International.DOI
20. Hua Jiang, Xianjun Hou, Chu Chen, Weiwei Guan, Youheng Wang, Danjiao Zhao (2024). Why do hybrid nanoparticles perform better in improving heat transfer performance of lubricating oil during lubrication process: An experiment and molecular dynamics simulation. Tribology International.DOI
21. Mohamed Kamal Ahmed Ali, Xian-Jun Hou, Hua Jiang (2024). Lubrication mechanism analysis of nickel-carbon-based tribological layer on sliding interfaces in automotive engines. Tribology International.DOI
22. Jianbo Wang, Changqing Du, Hongming Xu, Xianjun Hou, Quan Zhou (2023). Simultaneous Estimation and Receding Horizon Sliding Control of Dog Clutch Coupling With Backlash for Rear Electrical Drivelines. IEEE Transactions on Vehicular Technology.DOI
23. Youheng Wang, Xianjun Hou, Longxiang Zhang, Mohamed Kamal Ahmed Ali, Hua Jiang, Yuxin Ma (2023). Development of nano biochar as a lubricating oil additive for tribological applications. Journal of Cleaner Production.DOI
24. Hua Jiang, Xianjun Hou, Qifan Yu, Mohamed Kamal Ahmed Ali (2023). Elucidation of the synergistic mechanism of nano silicon carbide and titanium nitride as highly efficient additives of polyalphaolefin on strengthening the lubrication performance of movable contact interface. Wear.DOI
25. Qifan Yu, Xianjun Hou, Longxiang Zhang, Hua Jiang, Yuxin Ma, Mohamed Kamal Ahmed Ali (2023). Elaboration of thermophysical performance enhancement mechanism of functionalized boron nitride/graphite hybrid nanofluids. Advanced Powder Technology.DOI
26. Xianjun Hou, Chu Chen, Hua Jiang, Mohamed Kamal Ahmed Ali, Karl David Dearn (2023). Enhancing Heat Transfer Behaviour of Ethylene Glycol by the Introduction of Silicon Carbide Nanoparticles: An Experimental and Molecular Dynamics Simulation Study. Molecules.DOI
27. Hua Jiang, Xianjun Hou, Yucong Qian, Haijun Liu, Mohamed Kamal Ahmed Ali, Karl David Dearn (2023). A tribological behavior assessment of steel contacting interface lubricated by engine oil introducing layered structural nanomaterials functionalized by oleic acid. Wear.DOI
28. 侯献军，叶心雨，王友恒，苏达（2022）. 石墨烯/氧化铝纳米冷却液稳定性和导热性能研究. 《武汉理工大学学报》.
29. 侯献军，苏达，刘志恩，管炜，叶心雨，江华（2022）. 轻型商用车不同循环工况下排放性能与油耗分析. 《内燃机工程》.
30. 侯献军，苏达，王友恒，叶心雨，江华（2022）. 油基TiO2纳米流体的制备及流变性研究. 《功能材料》.
31. Hua Jiang, Xianjun Hou, Yuxin Ma, Weiwei Guan, Haijun Liu, Yucong Qian (2022). Elaboration of Ionic Liquids on the Anti-Wear Performance of the Reinforced Steel-Steel Contact Surface. Lubricants.DOI
32. Hua Jiang, Xianjun Hou, Yuxin Ma, Da Gen Su, Yucong Qian, Mohamed Kamal Ahmed Ali, Karl David Dearn (2022). The tribological performance evaluation of steel-steel contact surface lubricated by polyalphaolefins containing surfactant-modified hybrid MoS2/h-BN nano-additives. Wear.DOI
33. 刘海军，侯献军（2021）. 进/排气边界对高原柴油机缸内制动的数值模拟. 《内燃机学报》.DOI
34. 侯献军，熊纳，王友恒，刘志恩（2021）. 汽油/压缩天然气两用燃料发动机颗粒物排放特性研究. 《内燃机工程》.DOI
35. 侯献军，熊纳，王友恒（2021）. 碳黑对MoS2纳米润滑油的摩擦磨损性能影响. 《机械》.
36. 侯献军，程财，卢俊宇，王友恒（2021）. 2-甲基呋喃与生物柴油、柴油混合燃料的热平衡与?平衡分析. 《机械》.
37. Jianbo Wang, Hongming Xu, Xianjun Hou, Changqing Du, Quan Zhou (2021). A Moment-of-Inertia-Driven Engine Start-Up Strategy for Four-Wheel-Drive Hybrid Electric Vehicles. IEEE Transactions on Transportation Electrification.DOI
38. Hua Jiang, Xianjun Hou, Karl David Dearn, Da Gen Su, Mohamed Kamal Ahmed Ali (2021). Thermal stability enhancement mechanism of engine oil using hybrid MoS2/h-BN nano-additives with ionic liquid modification. Advanced Powder Technology.DOI
39. Hua Jiang, Xianjun Hou, Da Gen Su, Haijun Liu, Mohamed Kamal Ahmed Ali (2021). Elucidation of the thermophysical mechanism of hexagonal boron nitride as nanofluids additives. Advanced Powder Technology.DOI
40. Xianjun Hou, Haijun Liu, Xiaoxue Li, Hua Jiang, Zekun Tian, Mohamed Kamal Ahmed Ali (2021). An experimental study and mechanism analysis on improving dispersion stability performance of Al2O3 nanoparticles in base synthetic oil under various mixing conditions. Journal of Nanoparticle Research.DOI
41. Jianbo Wang, Hongming Xu, Xianjun Hou, Changqing Du, Quan Zhou (2021). Cross-Domain Collaborative Oscillation Control Strategy for a Hybrid Driveline Based on the Integration of a Notch Filter, PI filter, and Backlash Estimator. IFAC-PapersOnLine.DOI
42. M. Ali, Xian-Jun Hou (2021). Exploring the lubrication mechanism of CeO2 nanoparticles dispersed in engine oil by bis(2-ethylhexyl) phosphate as a novel antiwear additive. Tribology International.DOI
43. Ahmed Elagouz, M. Ali, Xian-Jun Hou, Mohamed A. A. Abdelkareem (2021). Thermophysical and tribological behaviors of multiwalled carbon nanotubes used as nanolubricant additives. Surface Topography Metrology and Properties.DOI
44. 侯献军，卢俊宇，王友恒，吴娜（2020）. 汽油机进气道及燃烧室结构优化与性能研究. 《内燃机工程》.DOI
45. 刘海军，侯献军，陈贵升，王友恒，江华（2020）. 高原环境下柴油机可变两级增压协同主喷定时的工作过程模拟. 《内燃机工程》.DOI
46. 侯献军，卢俊宇，何喆，王友恒（2020）. 摩托车排气系统耐久性分析及结构优化. 《武汉理工大学学报(交通科学与工程版)》.
47. 侯献军，卢俊宇，邹斌，刘志恩，程财（2020）. 替代燃料对发动机动力性及排放的影响. 《武汉理工大学学报(交通科学与工程版)》.
48. 唐禹，侯献军，王友恒（2020）. 电喷摩托车车载诊断系统设计(2). 《摩托车技术》.
49. Xianjun Hou, Hua Jiang, Mohamed Kamal Ahmed Ali, Haijun Liu, Da Gen Su, Zekun Tian (2020). Dispersion behavior assessment of the molybdenum disulfide nanomaterials dispersed into poly alpha olefin. Journal of Molecular Liquids.DOI
50. Jianbo Wang, Xianjun Hou, Changqing Du, Hongming Xu, Quan Zhou (2020). A Moment-of-Inertia-Driven Engine Start-Up Method Based on Adaptive Model Predictive Control for Hybrid Electric Vehicles With Drivability Optimization. IEEE Access.DOI
51. M. Ali, Xian-Jun Hou (2020). Colloidal stability mechanism of copper nanomaterials modified by ionic liquid dispersed in polyalphaolefin oil as green nanolubricants. Journal of Colloid and Interface Science.DOI
52. M. Ali, Xian-Jun Hou (2020). Improving the heat transfer capability and thermal stability of vehicle engine oils using Al2O3/TiO2 nanomaterials.DOI
53. M. Ali, Xian-Jun Hou (2020). Role of bis(2-ethylhexyl) phosphate and Al2O3/TiO2 hybrid nanomaterials in improving the dispersion stability of nanolubricants.DOI
54. 侯献军，席光维，李儒龙，王友恒，袁锋（2019）. 二次喷射对增压直喷汽油机颗粒物排放的影响. 《内燃机学报》.DOI
55. 侯献军，王友恒，卢俊宇，席光维，刘志恩（2019）. 基于国六标准的三元催化转化器与整车匹配研究. 《武汉理工大学学报》.
56. 侯献军，何喆，王友恒（2019）. 摩托车排气系统疲劳寿命研究. 《机械》.
57. Haijun Liu, Xianjun Hou, Xiaoxue Li, Di Lei (2019). Simulation Study on the Working Process of Diesel Engine with Injection Strategy Coupled EGR. International Conference on Mechanical, Control and Computer Engineering (ICMCCE).DOI
58. Mohamed Kamal Ahmed Ali, Xianjun Hou, Mohamed A. A. Abdelkareem (2019). Anti-wear properties evaluation of frictional sliding interfaces in automobile engines lubricated by copper/graphene nanolubricants. Friction.DOI
59. Mohamed Kamal Ahmed Ali, Xianjun Hou (2019). M50 Matrix Sintered with Nanoscale Solid Lubricants Shows Enhanced Self-lubricating Properties Under Dry Sliding at Different Temperatures. Tribology Letters.DOI
60. M. Ali, Xian-Jun Hou (2019). Tribological characterization of M50 matrix composites reinforced by TiO2/graphene nanomaterials in dry conditions under different speeds and loads. Materials Research Express.DOI
61. M. Ali, M. Makrahy, Xian-Jun Hou (2019). Role of the friction layer formed on the brake lining surface in friction stabilization for automotive brakes. Surface Topography Metrology and Properties.DOI
62. Ahmed Elagouz, M. Ali, Xian-Jun Hou, Mohamed A. A. Abdelkareem, Mohamed A. Hassan (2019). Frictional performance evaluation of sliding surfaces lubricated by zinc-oxide nano-additives. Surface Engineering.DOI
63. Mohamed Kamal Ahmed Ali, Xian-Jun Hou, Mohamed A. A. Abdelkareem, A. Elsheikh (2019). Role of Nanolubricants Formulated in Improving Vehicle Engines Performance. IOP Conference Series: Materials Science and Engineering.DOI
64. Ahmed Elagouz, Mohamed Kamal Ahmed Ali, Xian-Jun Hou, Mohamed A. A. Abdelkareem (2019). Techniques used to improve the tribological performance of the piston ring-cylinder liner contact. IOP Conference Series: Materials Science and Engineering.DOI
65. 侯献军，高寒，席光维，王志红，彭辅明（2018）. 基于BP神经网络的发动机最佳点火提前角MAP优化分析. 《武汉理工大学学报(交通科学与工程版)》.
66. 侯献军，郭金，杜松泽，郭彩祎（2018）. 基于声模态和板件贡献分析的车身降噪研究. 《汽车技术》.
67. 侯献军，王士成，MOHAMED KAMAL Ahmed Ali（2018）. 纳米润滑添加剂改善摩擦磨损提高发动机性能的研究. 《润滑与密封》.
68. 刘俊峰，杜松泽，郭金，侯献军（2018）. 基于Optistruct的汽车制动盘防尘罩形貌优化. 《汽车科技》.
69. 侯献军，王士成，肖生浩，王友恒（2018）. 单缸汽油机排气系统性能仿真及声学性能改进. 《数字制造科学》.
70. 侯献军，吴娜，王士成（2018）. 基于CFD的触媒位置对催化转化效率影响研究. 《摩托车技术》.
71. M. Ali, Xian-Jun Hou, F. Essa, Mohamed A. A. Abdelkareem, Ahmed Elagouz, Swellam W. Sharshir (2018). Friction and Wear Reduction Mechanisms of the Reciprocating Contact Interfaces using Nanolubricant under Different Loads and Speeds.DOI
72. M. Ali, Xian-Jun Hou, Mohamed A. A. Abdelkareem, Mubashir Gulzar, A. Elsheikh (2018). Novel approach of the graphene nanolubricant for energy saving via anti-friction/wear in automobile engines. Tribology International.DOI
73. M. Ali, Fu-Ming Peng, Hussein A. Younus, Mohamed A. A. Abdelkareem, F. Essa, Ahmed Elagouz, Xian-Jun Hou (2018). Fuel economy in gasoline engines using Al2O3/TiO2 nanomaterials as nanolubricant additives.DOI
74. Xian-Jun Hou, Song-Ze Du, Chi-Hua Lu, Zi-En Liu, Hao Zheng, Haitao Wu (2018). Sound & vibration control for a single-cylinder gasoline engine based on parameter optimization of timing-chain system.DOI
75. 侯献军，莫丽蓉，刘志恩，杨良凯，王德宇（2017）. 基于频响分析的某特种车辆结构优化设计. 《武汉理工大学学报(交通科学与工程版)》.
76. 侯献军，高寒，王友恒（2017）. 乙醇汽油对单缸发动机性能影响的仿真研究. 《摩托车技术》.
77. 侯献军，蔡清平，陈必成，Mohamed Kamal Ahmed Ali，彭辅明（2017）. 纳米TiO2和Al2O3添加剂润滑油对缸套-活塞环摩擦磨损性能的影响. 《武汉理工大学学报(交通科学与工程版)》.
78. MOHAMED Kamal Ahmed Ali, FAWZY M.H.Ezzat, 侯献军, 陈必成, 蔡清平（2017）. 边界润滑条件下机油污染物对摩擦学性能的影响. 《润滑与密封》.
79. 侯献军，陈必成，蔡清平，Mohamed Kamal Ahmed Ali，彭辅明（2017）. 缸套-活塞环摩擦学性能模拟实验研究. 《润滑与密封》.
80. 侯献军，陈必成，蔡清平，Mohamed Kamal Ahmed Ali，彭辅明（2017）. Al2O3/TiO2纳米复合粉体的摩擦学性能研究. 《化工新型材料》.
81. Xianjun Hou, Songze Du, Zien Liu, Jin Xu Guo, Zengke Li (2017). A transfer matrix approach for structural–acoustic correspondence analysis of diesel particulate filter. Advances in Mechanical Engineering.DOI
82. M. Ali, Mohamed A. A. Abdelkareem, Ahmed Elagouz, F. Essa, Xian-Jun Hou (2017). Mini Review on the Significance Nano-Lubricants in Boundary Lubrication Regime.DOI
83. 侯献军，李孟孟，杜松泽，莫丽蓉，许京（2016）. 柴油机NOx排放控制技术研究及性能优化. 《武汉理工大学学报(交通科学与工程版)》.
84. 张威，卢炽华，杜松泽，刘志恩，侯献军（2016）. 排气噪声阶次调制软件实现及应用. 《汽车技术》.
85. 侯献军，王清森，徐雷（2016）. 灰分沉积对柴油机微粒捕集器再生影响分析. 《武汉理工大学学报(交通科学与工程版)》.
86. 胡杰，周帆亮，王天田，侯献军（2016）. 柴油机Urea-SCR催化器储氨量计算. 《汽车技术》.
87. R.F.TURKSON, 颜伏伍, 侯献军, M.K.A.ALI, 刘博（2016）. 基于人工神经网络的发动机点火提前角预测模型. 《汽车科技》.
88. 侯献军，许京，刘近平，杜松泽，李孟孟（2016）. 柴油机燃用柴油/乙醇混合燃料的颗粒排放特性. 《华南理工大学学报(自然科学版)》.
89. 李孟孟，侯献军，刘博（2016）. 电控喷油器参数对喷油规律的影响. 《北京汽车》.
90. Helin Xiao, Hou Beibei, Pengfei Zeng, Ao Jiang, Xianjun Hou, Jianguo Liu (2016). Combustion and emission characteristics of diesel engine fueled with 2,5-dimethylfuran and diesel blends. Fuel.DOI
91. Mohamed Kamal Ahmed Ali, Xianjun Hou, Richard Fiifi Turkson, Zhan Nan Peng, Xiandong Chen (2016). Enhancing the thermophysical properties and tribological behaviour of engine oils using nano-lubricant additives. RSC Advances.DOI
92. M. Ali, Xian-Jun Hou, L. Mai, Bicheng Chen, R. Turkson, Qingping Cai (2016). Reducing frictional power losses and improving the scuffing resistance in automotive engines using hybrid nanomaterials as nano-lubricant additives.DOI
93. M. Ali, Xian-Jun Hou, Ahmed Elagouz, F. Essa, Mohamed A. A. Abdelkareem (2016). Minimizing of the boundary friction coefficient in automotive engines using Al2O3 and TiO2 nanoparticles. Journal of nanoparticle research.DOI
94. Mohamed Kamal Ahmed Ali, Xian-Jun Hou, Richard Fiifi Turkson, M. Ezzat (2016). An analytical study of tribological parameters between piston ring and cylinder liner in internal combustion engines.DOI
95. M. Ali, Xian-Jun Hou, L. Mai, Qingping Cai, R. Turkson, Bicheng Chen (2016). Improving the tribological characteristics of piston ring assembly in automotive engines using Al2O3 and TiO2 nanomaterials as nano-lubricant additives.DOI
96. Xian-Jun Hou, Jing Xu, Jin-Ping Liu, Song-Ze Du, Meng-Meng Li (2016). Particulate Emission Characteristics of Diesel Engine Fueled with Diesel /Ethanol Blends.
97. 侯献军，马将森，杜松泽，李增科（2015）. 基于CFD方法的整车冷却系统匹配分析. 《汽车技术》.
98. 侯献军，张新，杜松泽，许京，李孟孟（2015）. 轻型柴油机用微粒捕集器内流场分析及结构优化. 《武汉理工大学学报(交通科学与工程版)》.
99. 侯献军，陈旷，杜松泽，莫丽蓉（2015）. 柴油机微粒捕集器与整车匹配研究. 《武汉理工大学学报(交通科学与工程版)》.
100. 袁守利，刘超海，侯献军，王志军（2015）. 乘用车双尾管消声器设计. 《武汉理工大学学报(信息与管理工程版)》.
101. 颜伏伍，郑灏，卢炽华，侯献军，刘志恩，杜松泽（2015）. 微型客车轰鸣噪声源的识别与控制. 《汽车工程》.
102. 侯献军，张立，刘志恩（2015）. 考虑DPF的柴油机排气系统动力学分析及悬挂位置优化. 《武汉理工大学学报》.
103. 侯献军，张新，杜松泽，李孟孟，许京（2015）. 柴油机微粒捕集器中微粒物分布特性研究. 《汽车科技》.
104. M. Ali, Xian-Jun Hou (2015). Improving the tribological behavior of internal combustion engines via the addition of nanoparticles to engine oils.DOI
105. Xian-Jun Hou (2015). Matching Research of Diesel Particulate Filter and Vehicle.
106. 颜伏伍，郑灏，侯献军，刘志恩（2014）. 汽车前副车架耐久性分析与结构改进. 《汽车工程》.
107. Jie Hu, Hao Li, Xian-Jun Hou, Xiong-Zhen Qin (2014). Research and Development of Vehicle Fault Diagnostic System Based on MDI.DOI
108. 侯献军，杨凯，刘志恩（2013）. 基于MATLAB的动力总成悬置系统优化设计. 《面向未来的汽车与交通——2013中国汽车工程学会年会;2013中国汽车工程学会年会》.
109. 陈熊，李孟良，侯献军，徐月云（2013）. 不同工况下DPF对柴油车颗粒物过滤特性的研究. 《汽车工程》.
110. 侯献军，罗海锋，刘志恩（2013）. 平行流冷凝器流程和集流管扁管布置的优化分析. 《2013中国汽车工程学会年会;面向未来的汽车与交通——2013中国汽车工程学会年会》.
111. 王国栋，袁观练，黄荣辉，周洋，侯献军（2013）. 低速中低负荷下VVT对汽油机燃油经济性的影响. 《武汉理工大学学报(信息与管理工程版)》.
112. 侯献军，云祥，刘志恩（2013）. 基于Fluent的汽车空调冷凝器翅片宽度仿真分析. 《武汉理工大学学报(信息与管理工程版)》.
113. Changqing Du, Fan Li, Xian-Jun Hou, Yi-Fan Zhao (2013). Modeling and Simulation of LiFePO4 Battery for Electric Vehicle.DOI
114. Xian-Jun Hou, Shu Chen, Zhi-En Liu (2013). EGR System Performance Optimization of Diesel Engine Based on GT-Power and Fluent Co-Simulation.DOI
115. Zhi-En Liu, Xue-Ning Li, Xian-Jun Hou, C. Wang, Fu-Wu Yan (2013). Numerical Simulation for Exhaust Manifold Based on the Serial Coupling of STAR-CCM+ and ABAQUS.DOI
116. Guo-Dong Wang, Xian-Jun Hou (2013). Influence of VVT on Engine Fuel Economy under Low Speed and Low Load.
117. 刘庆，徐楠楠，侯献军（2012）. 发动机排气消声系统与催化装置的匹配研究. 《汽车科技》.
118. 刘庆，侯献军，李菁元（2012）. 欧5/6轻型车耐久性试验研究. 《武汉理工大学学报(信息与管理工程版)》.
119. 李高坚，袁观练，周洋，侯献军，邹斌（2012）. 基于CCP协议的电控单元标定系统通信模块. 《武汉理工大学学报(信息与管理工程版)》.
120. 刘志恩，尹婧，颜伏伍，侯献军，郭晶晶（2012）. κ-ε模型和RNG模型模拟分析车用空滤器湍流流场. 《武汉理工大学学报(交通科学与工程版)》.
121. 孙立旺，朱清山，侯献军，刘志恩，颜伏伍（2012）. 基于直接流固耦合的发动机排气歧管热应力分析. 《河南农业大学学报》.
122. 侯献军，马义，彭辅明，颜伏伍（2012）. 柴油机微粒捕集器再生中灰分沉积机理及影响研究. 《汽车工程》.
123. 马义，侯献军，郭学敏，郝宝玉，姚源（2012）. CRT再生特性及再生模式切换可行性研究. 《小型内燃机与车辆技术》.
124. Xianjun Hou (2012). Matching Research of Engine Exhaust Muffler System and Catalytic Device. Auto Mobile Science & Technology.
125. Xiao-Hong Yuan, Qiang Sun, Xian-Jun Hou, Shu Chen, Zhi-En Liu, Yadong Deng (2012). Evaluation and Analysis of Temperature Uniformity for Planar Automotive Waste Heat Thermoelectric Generator.DOI
126. 侯献军，刘鑫，袁守利，彭辅明，马宗来（2011）. 满足国Ⅲ标准的摩托车活性炭罐匹配研究. 《武汉理工大学学报》.
127. 侯献军，郑灏，刘志恩，颜伏伍（2011）. 汽车排气系统局部疲劳耐久性试验仿真分析. 《汽车技术》.
128. 杜常清，颜伏伍，李夏楠，侯献军（2011）. 行星齿轮机械式自动变速器换挡控制策略的研究. 《汽车工程》.
129. 侯献军，王凯楠，余其旺，闫少杰，徐楠楠（2011）. 汽油/CNG两用燃料汽车燃料切换仿真研究. 《武汉理工大学学报(信息与管理工程版)》.
130. 侯献军，李金龙，刘志恩，颜伏伍，杨伦，周锦佳（2011）. 基于OptiStruct消声器端盖形貌优化. 《武汉理工大学学报(信息与管理工程版)》.
131. 郝宝玉，侯献军，彭辅明，刘华刚，颜伏伍（2011）. 车用三元催化转化器快速老化试验研究. 《武汉理工大学学报(信息与管理工程版)》.
132. 殷俊，魏明锐，侯献军，彭辅明，王天田，张献安，王海良（2011）. 深圳市在用柴油公交车排放研究. 《环境工程学报》.
133. 侯献军，马义，彭辅明，颜伏伍，张献安（2011）. 基于GT-Power的DPF喷油催化燃烧再生仿真技术. 《北京理工大学学报》.
134. 侯献军，马义，彭辅明，颜伏伍（2011）. 柴油机微粒捕集器瞬态再生特性仿真. 《汽车科技》.
135. 王凯楠，侯献军，闫少杰，余其旺，徐楠楠（2011）. 基于Fluent的天然气燃烧特性研究. 《汽车科技》.
136. Xian-Jun Hou, G. Saic (2011). Performance Simulation and Noise Reduction of Engine Intake System.
137. Xian-Jun Hou, Jin-Jiang Zhou (2011). Topography Optimization of a Muffler Cover Using OptiStruct Software.
138. 侯献军，刘志恩，颜伏伍，刘庆（2010）. 汽车排气系统静力学计算及模态分析. 《汽车技术》.
139. 刘志恩，田静，颜伏伍，侯献军，李金龙（2010）. 汽车排气系统悬挂点布置研究. 《武汉理工大学学报(信息与管理工程版)》.
140. 徐月云，李孟良，方茂东，侯献军（2010）. 装有DPF的轻型柴油车颗粒物排放特性的研究. 《汽车工程》.
141. 杜常清，颜伏伍，李劲松，侯献军（2010）. 发动机性能测试及扭矩控制原型建立方法研究. 《内燃机工程》.
142. 侯献军，方丹，巩学军，颜伏伍，彭辅明（2010）. LJ276M汽油机连杆静强度三维有限元分析. 《小型内燃机与车辆技术》.
143. 侯献军，王天田，田翠翠，王洪健，刘志恩（2010）. 基于GT-Power的乘用车消声器设计. 《北京理工大学学报》.
144. 侯献军，田翠翠，刘志恩，颜伏伍（2010）. 双层串联微穿孔板消声器的设计与试验. 《机械科学与技术》.
145. 徐月云，侯献军，方茂东（2010）. DPF对柴油车微粒物排放的影响研究. 《汽车与配件》.
146. 侯献军，潘洪健，彭辅明，袁守利，颜伏伍（2010）. 满足摩托车国Ⅲ排放标准的净化技术研究. 《汽车科技》.
147. 侯献军，王天田，殷俊，彭辅明，颜伏伍，张献安（2010）. 深圳市柴油车排放现状研究. 《汽车科技》.
148. 徐月云，方茂东，侯献军（2010）. DPF对柴油车颗粒物排放的影响研究. 《汽车科技》.
149. 侯献军，刘鑫，彭辅明，刘华刚，颜伏伍（2010）. LJ276M汽油机性能对比试验研究. 《摩托车技术》.
150. Xianjun Hou, Xuemin Guo, Zhien Liu, Fuwu Yan, Fuming Peng (2010). Flow Field Analysis and Improvement of Automobile Exhaust System Cold End.DOI
151. Xianjun Hou, Xin Liu, Zhien Liu, Fuwu Yan, Shouli Yuan, Xue Jin (2010). Flow Field Simulation and Experimental Evaluation of Carbon Canister Based on FLUENT.DOI
152. Changqing Du, Fuwu Yan, Xianjun Hou, Jie Hu (2010). Notice of Retraction: Development Platform for the Control System of Hybrid Electric vehicles Powertrain. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
153. Xianjun Hou, Yi Ma, Fuming Peng, Fuwu Yan, Xianan Zhang (2010). Research on Temperature Characteristics of DPF Regeneration Technology Based on Catalytic Combustion of Fuel Injection. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
154. Xian-Jun Hou (2010). Engine Performance Testing and Torque Control Prototype Constructing.
155. Xian-Jun Hou (2010). The Influence of DPF on Diesel Vehicles PM Emissions.
156. 颜伏伍，夏晓坤，邹斌，侯献军（2009）. 摩托车第Ⅳ阶段排放标准预测及技术路线研究. 《武汉理工大学学报(信息与管理工程版)》.
157. 侯献军，马义，彭辅明，颜伏伍（2009）. 喷油催化燃烧再生的DPF提温特性研究. 《湖北省内燃机学会2009年学术年会》.
158. 侯献军，金雪，刘志恩，颜伏伍，袁守利（2009）. 基于Fluent的车用冷却水泵内流场分析及改进. 《湖北省内燃机学会2009年学术年会》.
159. 侯献军，刘庆，刘志恩（2009）. 基于GT-Power的汽车排气消声器性能分析及改进. 《汽车技术》.
160. 侯献军，巩学军，方丹，彭辅明，颜伏伍（2009）. 汽油机电控系统稳态工况匹配标定研究. 《武汉理工大学学报(信息与管理工程版)》.
161. 侯献军，李健（2009）. 汽车再制造工程及其工艺技术的研究. 《武汉理工大学学报(信息与管理工程版)》.
162. 侯献军，杜常清，颜伏伍，郝培（2009）. 混合动力系统状态切换技术研究. 《内燃机工程》.
163. 侯献军，袁守利，颜伏伍，彭辅明（2009）. 基于正交试验的生物柴油制取关键参数分析. 《武汉理工大学学报》.
164. 侯献军，巩学军，方丹，于佳（2009）. LJ276M电喷汽油机进气系统设计及优化. 《武汉理工大学学报(交通科学与工程版)》.
165. 侯献军，桂文刚，金雪（2009）. 质子交换膜燃料电池发动机热管理研究. 《汽车科技》.
166. 李健，侯献军（2009）. 汽车再制造工程的发展与展望. 《汽车科技》.
167. 侯献军，巩学军，方丹（2009）. ATV用LJ276M汽油机电控系统参数的标定. 《电力与能源》.
168. 侯献军（2009）. ATV用LJ276M电控汽油机关键技术研究. 《武汉理工大学》.
169. 侯献军，方丹，巩学军，彭辅明（2009）. LJ276M汽油机示功图试验研究. 《汽车科技》.
170. Xianjun Hou, Wengang Gui, Xue Jin, Mu Pan (2009). Research on the 25kW FCPS's Temperature Controlling Simulation.DOI
171. Xian-Jun Hou, C. Tian, Dan Fang, Fu-Ming Peng, Fu-Wu Yan (2009). Sensitivity Analysis and Optimization for Connecting Rod of LJ276M Electronic Gasoline Engine. 2009 International Conference on Computational Intelligence and Software Engineering.DOI
172. Fu-Wu Yan, Xian-Jun Hou (2009). Forecast of Phase IV Emission Standard and Study on Technical Route for Motorcycles.
173. Xian-Jun Hou, Xue Z. Jin, Zhi-En Liu, Fu-Wu Yan, Shouli Yuan (2009). Flow Field Analysis and Improvement of Automobile Water Pump Based on FLUENT. 2009 International Conference on Computational Intelligence and Software Engineering.DOI
174. 颜伏伍，刘鑫，杜常清，侯献军，彭辅明，周军（2008）. 479Q汽油机电控参数标定研究. 《车用发动机》.
175. 刘庆，侯献军（2008）. 基于HyperMesh/OptiStruct的汽车零部件结构拓扑优化设计. 《装备制造技术》.
176. 田翠翠，侯献军，刘志恩，王天田（2008）. 壁面吸声材料对汽车排气消声器性能的影响. 《汽车科技》.
177. 侯献军，郝培，袁守利，李忠亮（2008）. 生物柴油的制取及其在柴油机上的应用. 《汽车科技》.
178. Xianjun Hou (2008). Structure topology optimization design of vehicle parts based on HyperMesh/OptiStruct. Equipment Manufacturing Technology.
179. 李忠华，杜传进，侯献军（2007）. 质子交换膜燃料电池热管理研究. 《华东电力》.
180. 袁守利，杜传进，颜伏伍，侯献军（2007）. LPG车用发动机技术的现状和发展展望. 《电力与能源》.
181. 袁晓红，何天明，滕培智，侯献军（2007）. 基于逆向工程的摩托车油箱设计. 《武汉理工大学学报(信息与管理工程版)》.
182. 袁晓红，乐玉汉，苏楚奇，余晨光，侯献军（2007）. 汽车化摩托车的开发与研究. 《摩托车技术》.
183. 袁晓红，侯献军（2007）. 新型能源摩托车简介. 《摩托车技术》.
184. Xianjun Hou (2007). Thermal management for proton exchange membrane fuel cells. East China Electric Power.
185. Xianjun Hou (2007). Actuality and Development of Technology about LPG Vehicular. Energy Technology.
186. 唐永华，颜伏伍，侯献军，李小毅（2005）. 燃料电池发动机水热管理系统设计研究. 《华东电力》.
187. 袁守利，颜伏伍，杜传进，侯献军（2005）. 降低汽油机冷起动过程HC排放的分级催化转化技术研究. 《小型内燃机与车辆技术》.
188. 颜伏伍，李小毅，肖合林，侯献军（2005）. 燃料电池发动机水热管理系统的计算及有限元分析. 《汽车工艺与材料》.
189. 侯献军，颜伏伍，邹斌，彭辅明，杜传进（2005）. 林海LH150摩托车排放控制技术研究. 《摩托车技术》.
190. 侯献军，杜传进，彭辅明，刘华刚（2005）. 车用电动汽油泵的理论研究与实践. 《武汉理工大学学报(信息与管理工程版)》.
191. Xianjun Hou (2005). Calculation and Finite Element Analysis on Water-Heat Management System For Fuel Cell Engine. Automobile Technology & Material.
192. 袁守利，杜传进，颜伏伍，侯献军，肖合林（2004）. 25kW车用燃料电池发动机系统的设计. 《电力与能源》.
193. 肖合林，侯献军，颜伏伍（2004）. 燃料电池发动机系统计算分析. 《武汉理工大学学报》.
194. 袁守利，杜传进，颜伏伍，侯献军，肖合林（2004）. 车用燃料电池发动机系统的研究与应用. 《能源与环境》.
195. 侯献军，杜传进，颜伏伍，段功清，阮杰，彭辅明（2004）. 摩托车排气催化转化器应用的关键技术分析. 《小型内燃机与车辆技术》.
196. 肖合林，侯献军，颜伏伍（2004）. 降低柴油机排气中氮氧化物含量的催化还原系统的研究. 《小型内燃机与车辆技术》.
197. 侯献军，杜传进，颜伏伍，肖合林，袁守利（2004）. 车用燃料电池发动机系统设计研究. 《车用发动机》.
198. 袁守利，杜传进，颜伏伍，侯献军（2004）. 车用汽油机实现稀薄燃烧的技术措施. 《车用发动机》.
199. 邹华，颜伏伍，邹斌，侯献军（2004）. 二冲程发动机夹气喷射系统方案分析. 《摩托车技术》.
200. 侯献军，颜伏伍，刘晓惠，刘淑筠，李小毅，任明（2004）. 燃料电池电动汽车中的加湿技术研究. 《武汉理工大学学报(信息与管理工程版)》.
201. 颜伏伍，任明，邹斌，杜传进，侯献军（2004）. 电控发动机自动标定系统设计. 《武汉理工大学学报(信息与管理工程版)》.
202. 侯献军，颜伏伍，杜传进，彭辅明，阮杰（2004）. 采用二次空气补给降低摩托车排放的研究. 《摩托车技术》.
203. 侯献军，彭辅明，颜伏伍，杜传进（2004）. 排气动力效应在二冲程摩托车上的应用. 《摩托车技术》.
204. Xianjun Hou (2004). Key to the Technological Measures of Realizing Lean Burn System in Gasoline Engine for Vehicles. Vehicle Engine.
205. Xian-Jun Hou (2004). Research of the Vehicle Fuel Cell Engine System Design.
206. 颜伏伍，杜传进，侯献军，袁守利，段功清，彭辅明，宋万和，陈丽珍（2003）. 采用氧化型催化剂降低柴油机尾气排放的研究. 《车用发动机》.
207. 颜伏伍，邹斌，侯献军，杜传进，阮杰，段功清，彭辅明（2003）. 摩托车发动机电控燃油喷射系统的设计. 《武汉理工大学学报(信息与管理工程版)》.
208. 颜伏伍，周芳，邹斌，杜传进，侯献军，阮杰，彭辅明，段功清（2003）. 发动机电子控制匹配开发系统的建立. 《武汉理工大学学报(信息与管理工程版)》.
209. 颜伏伍，杜传进，侯献军，彭辅明，袁守利，段功清（2003）. 柴油机氧化型催化剂及其微型评价装置的开发应用. 《汽车工艺与材料》.
210. 肖合林，颜伏伍，杜传进，侯献军（2003）. 柴油机微粒过滤器的研究. 《内燃机》.
211. 杜传进，李三超，颜伏伍，侯献军（2002）. 柴油添加剂在柴油机微粒净化中的应用. 《武汉理工大学学报(信息与管理工程版)》.
212. 颜伏伍，董力平，侯献军，杜传进，段功清（2001）. 汽油机排气催化转化器总成机械性能评价方法的研究及应用. 《汽车工程》.
213. 董力平，侯献军，阮杰，杜传进（2000）. 催化转化器与发动机匹配研究. 《武汉理工大学学报(信息与管理工程版)》.
214. 袁晓红，何天明，侯献军（1999）. 汽车发动机薄壁类零件低噪声分析系统的开发. 《武汉理工大学学报(信息与管理工程版)》.
215. 侯献军，颜伏伍，阮杰，董力平（1999）. 二冲程发动机排气动力计算程序的开发. 《武汉理工大学学报(信息与管理工程版)》.
216. 杜传进，董力平，颜伏伍，段功清，侯献军，彭辅明，阮杰，魏逊蒙（1999）. 车用排气催化转化器与发动机的匹配. 《车用发动机》.
217. 董力平，段功清，颜伏伍，庄志，侯献军，阮杰，彭辅明，刘华刚（1999）. 摩托车排气污染及其催化转化技术研究. 《武汉理工大学学报(信息与管理工程版)》.
218. 颜伏伍，董力平，段功清，庄志，侯献军，阮杰，彭辅明，刘华刚（1999）. 摩托车排气净化消声器的研制. 《武汉理工大学学报(信息与管理工程版)》.

预印本

1. Haijun Liu, Xianjun Hou, Xiaoxue Li, Hua Jiang, Zekun Tian, Mohamed Kamal Ahmed Ali (2020). Effect of Mixing Temperature, Ultrasonication Duration and Nanoparticles/Surfactant Concentration on the Dispersion Performance of Al2O3 Nanolubricants. Research Square.DOI