张智明｜同济大学｜学者主页

2026

面向宽域长效创新人才培养的车辆系统动力学研究生课程思政育人探讨

张智明，赵治国，唐辰，赵欣，甄玉君

《大学》

2026

汽车系统动力学研究生课程知识图谱构建与可视化交互系统研究

张智明，胡光旭，赵治国，甄玉君，赵欣，符鹏鹏

《汽车实用技术》

DOI

2025

基于等效梁模型的车用PEMFC电堆塌腰分析

张智明，刘轩宇，赵世佳，王建斌，张衡

《同济大学学报(自然科学版)》

2025

车辆系统动力学研究生课程思政育人元素设计与应用探讨

张智明，赵治国，唐辰，赵欣，甄玉君

《汽车实用技术》

DOI

2025

燃料电池汽车关键技术发展趋势及瓶颈问题

赵世佳，张智明，王建斌，刘轩宇

《同济大学学报(自然科学版)》

2025

多平行子流道结构质子交换膜燃料电池的新型阴极双极板流场设计（英文）

张智明，陈冲，梁启昕，张云瀚，杨贺，韦萍

《同济大学学报(自然科学版)》

2025

Study of an equivalent mechanical model and experimental validation to predict the impact slippage of a full-dimensional PEMFC stack for commercial trucks

Zhiming Zhang, Chaokuan Fang, Juannan Zhang, Hui Ren, Tong Zhang, Ping Wei, Xinzhen Shi, Xinfeng Zhang

Energy

DOI

2025

Proton Exchange Membrane Fuel Cells for Aircraft Applications: A Comprehensive Review of Key Challenges and Development Trends

Xinfeng Zhang, Yue Han, Hui Zheng, Lixing Tan, Zhiming Zhang, Feng Li

Hydrogen

DOI

2024

An Electrochemical Performance Model Considering of Non-Uniform Gas Distribution Based on Porous Media Method in PEMFC Stack

Zhiming Zhang, Chenfu Quan, Sai Wu, Tong Zhang, Jinming Zhang

Sustainability，Vol. 16, No. 2

DOI

2024

加长加宽的PEMFC电堆应力分布一致性仿真与优化

张智明，黄刚强，任辉，陈志浩，章桐

《湖南大学学报(自然科学版)》

2024

A Nonlinear Active Disturbance Rejection Feedback Control Method for Proton Exchange Membrane Fuel Cell Air Supply Subsystems

Jiaming Zhou, Weixiang Ding, Jinming Zhang, Fengyan Yi, Zhiming Zhang, Guangping Wu, Caizhi Zhang

Actuators

DOI

2024

Electromagnetic Torque Components Analysis of Ultra-High-Speed Permanent-Magnet Synchronous Motor for Fuel Cell Air Compressor

Jiaming Zhou, Jinming Zhang, Fengyan Yi, Donghai Hu, Caizhi Zhang, Yanzhao Li, Zhiming Zhang, Guangping Wu, Jinxiang Song

Actuators

DOI

2023

Dynamic Simulation Model and Experimental Validation of One Passive Fuel Cell-Battery Hybrid Powertrain for an Electric Light Scooter

Zhiming Zhang, Alexander Rex, Jiaming Zhou, Xinfeng Zhang, Gangqiang Huang, Jinming Zhang, Tong Zhang

Sustainability，Vol. 15, No. 17

DOI

2023

A Multi-Field Coupled PEMFC Model with Force-Temperature-Humidity and Experimental Validation for High Electrochemical Performance Design

Zhiming Zhang, Zhihao Chen, Kunpeng Li, Xinfeng Zhang, Caizhi Zhang, Tong Zhang

Sustainability，Vol. 15, No. 16

DOI

2023

车用燃料电池折流水气分离设计及影响因素分析

张智明，张俊，张煜，章桐

《汽车技术》

2023

Modelling, validation and analysis of preheating strategy of fuel cell vehicle during Subzero cold start

Caizhi Zhang, Jiajun Chen, Mengzhu Luo, Yu Li, Fengyan Yi, Jiaming Zhou, Zhiming Zhang, Bo Deng

International Journal of Heat and Mass Transfer

DOI

2022

Arrangement of Belleville Springs on Endplates Combined with Optimal Cross-Sectional Shape in PEMFC Stack Using Equivalent Beam Modeling and FEA

Zhiming Zhang, Hui Ren, Song Hu, Xinfeng Zhang, Tong Zhang, Jiaming Zhou, Shangfeng Jiang, Tao Yu, Bo Deng

Sustainability，Vol. 14, No. 23

DOI

2022

An Effective Force-Temperature-Humidity Coupled Modeling for PEMFC Performance Parameter Matching by Using CFD and FEA Co-Simulation

Zhiming Zhang, Sai Wu, Kunpeng Li, Jiaming Zhou, Caizhi Zhang, Guofeng Wang, Tong Zhang

Sustainability，Vol. 14, No. 21

DOI

2022

Study on the Optimal Cross-Sectional Shapes of the PEMFC Endplates by Using a Moment of Inertia and 3D FEM Models

Zhiming Zhang, Jun Zhang, Yapeng Shang, Tong Zhang

Sustainability，Vol. 14, No. 19

DOI

2022

Numerical Investigation of Flow Channel Design and Tapered Slope Effects on PEM Fuel Cell Performance

Zhiming Zhang, Sai Wu, Huimin Miao, Tong Zhang

Sustainability，Vol. 14, No. 18

DOI

2022

A Study of Contact Pressure with Thermo-Mechanical Coupled Action for a Full-Dimensional PEMFC Stack

Zhiming Zhang, Jun Zhang, Liang Shi, Tong Zhang

Sustainability，Vol. 14, No. 14

DOI

2022

Endplate Design and Topology Optimization of Fuel Cell Stack Clamped with Bolts

Zhiming Zhang, Jun Zhang, Tong Zhang

Sustainability，Vol. 14, No. 8

DOI

2022

车辆工程专业多维协同育人课程思政教学改革探讨

赵治国，张智明，武建军

《汽车实用技术》

2022

两横两纵“汽车设计”课程思政教学改革探讨

张智明，张娟楠，赵治国，武建军

《汽车实用技术》

2022

燃料电池离心式空压机转子临界转速关键影响因素分析

张智明，潘佳琪，章桐

《汽车工程》

2022

Response Analysis and Stator Optimization of Ultrahigh-Speed PMSM for Fuel Cell Electric Air Compressor

Fengyan Yi, Qingqing Su, Chunxiao Feng, Xingmao Wang, Lei Yang, Jiaming Zhou, Zhixian Fan, Shangfeng Jiang, Zhiming Zhang, Tao Yu, Bo Deng

IEEE Transactions on Transportation Electrification

DOI

2022

An effective equivalent stiffness model combined with equivalent beam model to predict the contact pressure distribution for a large PEM fuel cell stack

Zhiming Zhang, Jun Zhang, Song Nian Hu, Tong Zhang

International Journal of Hydrogen Energy

DOI

2021

车用燃料电池空压机高速高温转子结构强度分析

张智明，潘佳琪，章桐

《同济大学学报(自然科学版)》

2021

Experimental Validation of Hydrogen Fuel-Cell and Battery-Based Hybrid Drive without DC-DC for Light Scooter under Two Typical Driving Cycles

Zhiming Zhang, Jianan Tang, Tong Zhang

Energies

DOI

2021

An equivalent mechanical model investigating endplates deflection for PEM fuel cell stack

Zhiming Zhang, Yapeng Shang, Tong Zhang

Advances in Mechanical Engineering

DOI

2020

车用质子交换膜燃料电池交变温度条件下的膜电极受力分析

唐嘉楠，邹海斌，张智明，章桐

《汽车技术》

DOI

2019

钢带捆扎质子交换膜燃料电池端板拓扑优化

张智明，史亮，郝韫，章桐

《同济大学学报(自然科学版)》

2019

Mechanical behavior of a hydrated perfluorosulfonic acid membrane at meso and nano scales

Cong Feng, Yan Li, Kunnan Qu, Zhiming Zhang, Pengfei He

RSC Advances

DOI

2018

螺杆集成方式对燃料电池电化学性能的影响

张智明，胡淞，施晓珺，杨代军

《同济大学学报(自然科学版)》

2018

N路非理想燃料电池发动机用升压变换器建模

张晓杰，张智明，章桐

《上海汽车》

2018

燃料电池动力系统用直流变换器拓扑选择

张晓杰，张智明

《汽车与配件》

2018

PEMFC密封胶接触压力的均匀性研究及改善方法

张智明，胡淞，李昆朋，张云瀚，杨代军

《湖南大学学报(自然科学版)》

2017

PEM燃料电池性能损耗的多场耦合仿真分析

张智明，沈哲民，徐传丁，章桐

《电源技术》

2017

基于多场耦合模型质子交换膜燃料电池性能影响因素的分析与优化

张智明，李昆朋，沈哲民，胡淞

《同济大学学报(自然科学版)》

2017

钢带捆扎燃料电池电堆端板尺寸和形状优化

张智明，商亚鹏，张娟楠，马天才

《同济大学学报(自然科学版)》

2017

基于GDL非一致孔隙率的PEMFC模拟仿真

张智明，沈哲民，商亚鹏，潘涛

《华南理工大学学报(自然科学版)》

2017

燃料电池车用超高速空压机临界转速分析与提高措施

詹剑，张智明，张娟楠，李昌昊，倪玥

《中国计量大学学报》

2016

质子交换膜燃料电池金属双极板制备工艺研究进展

张嘉波，唐普洪，许来涛，丰崇友，张智明

《轻工机械》

2016

Analysis and experimental study on a novel gas foil bearing with nested compression springs

Kai Feng, Wanhui Liu, Rui Yu, Zhiming Zhang

Tribology International

DOI

2016

Analysis of novel hybrid bump-metal mesh foil bearings

Kai Feng, Xueyuan Zhao, Caijiao Huo, Zhiming Zhang

Tribology International

DOI

2015

Numerical and Compact Model of Metal Mesh Foil Bearings

Kai Feng, Xueyuan Zhao, Zhiming Zhang, Tong Zhang

Tribology Transactions

DOI

2015

Theoretical model of flexure pivot tilting pad gas bearings with metal mesh dampers in parallel

Kai Feng, Wanhui Liu, Zhiming Zhang, Tong Zhang

Tribology International

DOI

精选作品

期刊论文

面向宽域长效创新人才培养的车辆系统动力学研究生课程思政育人探讨

汽车系统动力学研究生课程知识图谱构建与可视化交互系统研究

基于等效梁模型的车用PEMFC电堆塌腰分析

车辆系统动力学研究生课程思政育人元素设计与应用探讨

燃料电池汽车关键技术发展趋势及瓶颈问题

多平行子流道结构质子交换膜燃料电池的新型阴极双极板流场设计（英文）

Study of an equivalent mechanical model and experimental validation to predict the impact slippage of a full-dimensional PEMFC stack for commercial trucks

Proton Exchange Membrane Fuel Cells for Aircraft Applications: A Comprehensive Review of Key Challenges and Development Trends

An Electrochemical Performance Model Considering of Non-Uniform Gas Distribution Based on Porous Media Method in PEMFC Stack

加长加宽的PEMFC电堆应力分布一致性仿真与优化

A Nonlinear Active Disturbance Rejection Feedback Control Method for Proton Exchange Membrane Fuel Cell Air Supply Subsystems

Electromagnetic Torque Components Analysis of Ultra-High-Speed Permanent-Magnet Synchronous Motor for Fuel Cell Air Compressor

Dynamic Simulation Model and Experimental Validation of One Passive Fuel Cell-Battery Hybrid Powertrain for an Electric Light Scooter

A Multi-Field Coupled PEMFC Model with Force-Temperature-Humidity and Experimental Validation for High Electrochemical Performance Design

车用燃料电池折流水气分离设计及影响因素分析

Modelling, validation and analysis of preheating strategy of fuel cell vehicle during Subzero cold start

Arrangement of Belleville Springs on Endplates Combined with Optimal Cross-Sectional Shape in PEMFC Stack Using Equivalent Beam Modeling and FEA

An Effective Force-Temperature-Humidity Coupled Modeling for PEMFC Performance Parameter Matching by Using CFD and FEA Co-Simulation

Study on the Optimal Cross-Sectional Shapes of the PEMFC Endplates by Using a Moment of Inertia and 3D FEM Models

Numerical Investigation of Flow Channel Design and Tapered Slope Effects on PEM Fuel Cell Performance

A Study of Contact Pressure with Thermo-Mechanical Coupled Action for a Full-Dimensional PEMFC Stack

Endplate Design and Topology Optimization of Fuel Cell Stack Clamped with Bolts

车辆工程专业多维协同育人课程思政教学改革探讨

两横两纵“汽车设计”课程思政教学改革探讨

燃料电池离心式空压机转子临界转速关键影响因素分析

Response Analysis and Stator Optimization of Ultrahigh-Speed PMSM for Fuel Cell Electric Air Compressor

An effective equivalent stiffness model combined with equivalent beam model to predict the contact pressure distribution for a large PEM fuel cell stack

车用燃料电池空压机高速高温转子结构强度分析

Experimental Validation of Hydrogen Fuel-Cell and Battery-Based Hybrid Drive without DC-DC for Light Scooter under Two Typical Driving Cycles

An equivalent mechanical model investigating endplates deflection for PEM fuel cell stack

车用质子交换膜燃料电池交变温度条件下的膜电极受力分析

钢带捆扎质子交换膜燃料电池端板拓扑优化

Mechanical behavior of a hydrated perfluorosulfonic acid membrane at meso and nano scales

螺杆集成方式对燃料电池电化学性能的影响

N路非理想燃料电池发动机用升压变换器建模

燃料电池动力系统用直流变换器拓扑选择

PEMFC密封胶接触压力的均匀性研究及改善方法

PEM燃料电池性能损耗的多场耦合仿真分析

基于多场耦合模型质子交换膜燃料电池性能影响因素的分析与优化

钢带捆扎燃料电池电堆端板尺寸和形状优化

基于GDL非一致孔隙率的PEMFC模拟仿真

燃料电池车用超高速空压机临界转速分析与提高措施

质子交换膜燃料电池金属双极板制备工艺研究进展

Analysis and experimental study on a novel gas foil bearing with nested compression springs

Analysis of novel hybrid bump-metal mesh foil bearings

Numerical and Compact Model of Metal Mesh Foil Bearings

Theoretical model of flexure pivot tilting pad gas bearings with metal mesh dampers in parallel

研究方向