刘亚运｜苏州大学｜学者主页

2026

Study on the Low-Damage Mechanism of Green ZrO2 Ceramics Under Ultrasonic Elliptical Vibration-Assisted Cutting

Helin Chen, Fanshuo Jia, Qi Zhu, Yayun Liu, Chuanyang Wang

Materials

DOI

2026

Novel double-sided laser welding approach for strength enhancement and defect mitigation in wide-gap glass joints

Ning Jiang, Rundong Qian, Haiyu Qiao, Huize Yin, Chenyi Ni, Yayun Liu, Chuanyang Wang

Optics & Laser Technology

DOI

2026

Pre-sintered Csf/Al2O3 ceramics toughening mechanisms and cutting performance enhancement by ultrasonic elliptical vibration-assisted cutting strengthening

Helin Chen, Yanhong Gao, Yiting Wang, Haitao Xu, Ning Jiang, Yayun Liu

Ceramics International

DOI

2025

对称双旋流器分离效果的数值模拟探究

蒋立伟，刘亚运，王传洋，贾繁硕，王广杰

《组合机床与自动化加工技术》

DOI

2025

扫描次数对准同步激光玻璃焊接焊缝成形影响

殷慧泽，刘亚运，王传洋

《应用激光》

DOI

2025

晶圆清洗工艺中气液两相流喷嘴的喷雾特性

刘亚运，顾佳晨，蒋超伟，贾繁硕，姜宁，蒋立伟

《半导体技术》

DOI

2025

Enhancing tribological performance of CBN materials by Fe3O4 nanofluid and wedge-shaped micro-texture considering electroosmosis effect

Hai-Shan Li, Kedong Zhang, Yayun Liu, Tongshun Liu, Xuhong Guo, Youqiang Xing

Wear

DOI

2025

A strong mechanical riveting structure in PC and PBT/GF induced by dual-wavelength during laser transmission welding

Yani Chen, Haiyu Qiao, Ning Jiang, Yayun Liu, Fanshuo Jia, Chuanyang Wang

Optics & Laser Technology

DOI

2025

Study on the forming and strengthening mechanism of textured AlN-PC welded joints by a dual-wavelength laser welding

Chuanyang Wang, Xue Feng Jiang, Fanshuo Jia, Yayun Liu, Guangjie Wang, Yiting Wang, Ning Jiang

Optics and Lasers in Engineering

DOI

2025

Improvements in Wettability and Tribological Behavior of Zirconia Artificial Teeth Using Surface Micro-Textures

Yayun Liu, Guangjie Wang, Fanshuo Jia, Xue Feng Jiang, Ning Jiang, Chuanyang Wang, Zhouzhou Lin

Materials

DOI

2025

Enhancing the welding joint strength of aluminum nitride ceramic and polycarbonate by micro-texture treatment

Fanshuo Jia, Dachao Sun, G Wang, Guangjie Wang, Yayun Liu, Ning Jiang, Ning Jiang, Chuanyang Wang

Ceramics International

DOI

2025

High-precision weld width detection in laser transmission welding via crow and wolf optimized neural networks

Ning Jiang, Ning Jiang, Rundong Qian, Haiyu Qiao, Chenyi Ni, Yayun Liu, Liquan Jiang, Chuanyang Wang

Optics & Laser Technology

DOI

2025

Mechanistic optimization of wide-gap ultrafast laser quartz glass welding with plasma dynamics

Ning Jiang, Rundong Qian, Huize Yin, Chenyi Ni, Yayun Liu, Haiyu Qiao, Chuanyang Wang

Journal of Materials Processing Technology

DOI

2025

Mechanism analysis of laser welding strength improvement of dissimilar materials based on surface micro-texture

Fanshuo Jia, Chuanyang Wang, Yayun Liu, Guangjie Wang, Ning Jiang

Optics and Lasers in Engineering

DOI

2025

Mechanical and Thermal Properties of 3D-Printed Continuous Bamboo Fiber-Reinforced PE Composites

Haiyu Qiao, Qian Li, Yani Chen, Yayun Liu, Ning Jiang, Chuanyang Wang

Materials

DOI

2025

Anti-wear behaviors of nanofluids at the micro-textured tool/chip interface of CBN tools with electromagnetic field effects

Kedong Zhang, Mingjing Jiang, Haishan Li, Xuhong Guo, Yayun Liu, Chuanyang Wang

Wear

DOI

2025

Frictional Behavior and Fluid Flow Simulation Analysis of Textured ZrO2–Polyetheretherketone Artificial Knee Joints

Liwei Jiang, Bo Li, Fanshuo Jia, Guangjie Wang, Yayun Liu, Kedong Zhang, Ning Jiang, Chuanyang Wang

Lubricants

DOI

2025

Innovative lightweight flexibility test platform for RV reducer with topology optimization and 3-D printing

Rundong Qian, Haiyu Qiao, Chenyi Ni, Yayun Liu, Chuanyang Wang, Ning Jiang

Measurement Science and Technology

DOI

2024

基于数字孪生技术的智能制造专业教学模式探索

乔海玉，刘亚运，陈峰，陈逸阳，王传洋

《模具制造》

DOI

2024

基于OBE的“机械制图”课程持续改进建设研究与实践

张克栋，刘亚运，刘同舜

《教育教学论坛》

2024

Enhancing the bonding strength and tribological performance of PVD coatings by liquid-assisted laser post-processing

Kedong Zhang, Di Wang, Mingjing Jiang, Chuang Zhang, Tongshun Liu, Yayun Liu

Materials Today Communications

DOI

2024

Mechanism analysis of dual wavelength laser welding AlN-PC joint based on microtexture treatment

Dachao Sun, Ning Jiang, Chenyi Ni, Yayun Liu, Yani Chen, Liwei Jiang, Chuanyang Wang

Optics & Laser Technology

DOI

2024

Neural-driven viscosity modeling and fatigue optimization for cycloidal gear systems

Ning Jiang, Rundong Qian, Haiyu Qiao, Yani Chen, Honghui Cao, Yayun Liu, Chuanyang Wang

Tribology International

DOI

2024

The effects of laser line energy on welding strength of PASF/PC using magnesium zinc alloy powders as absorbents in laser transmission welding

Xiaodong Yu, Chenyi Ni, Haiyu Qiao, Yani Chen, Yayun Liu, Chuanyang Wang

Optics & Laser Technology

DOI

2023

三种不同刀具干切削Al2O3陶瓷生坯切削加工性能研究

朱琦，张功达，刘亚运，王传洋

《工具技术》

2023

“智能制造导论”课程思政教学改革探索

刘亚运，赵原，张克栋，王传洋

《教育教学论坛》

2023

面向《机械制图》课程的逆向教学体系创新研究

张克栋，刘亚运，刘同舜，郭旭红

《学周刊》

2023

表面微结构对铝合金与PA66激光焊性能影响

张功达，朱琦，刘亚运，王传洋

《焊接学报》

2023

Effect of nano∖micro‐textures on the enhancement of tool wear resistance in green ceramics processing

Yayun Liu, Kedong Zhang, Qi Zhu, Chuanyang Wang

International Journal of Applied Ceramic Technology

DOI

2023

Study on the surface damage of green ZrO 2 ceramics in dry cutting based on discrete element method

Qi Zhu, Yayun Liu, Ziming Xu, Dachao Sun, Chuanyang Wang

International Journal of Applied Ceramic Technology

DOI

2023

An integrated methodology for estimating the interface temperature and effects of powder diameters in laser transmission welding process

Xiaodong Yu, Haiyu Qiao, Yani Chen, Qian Li, Zhenyu Chen, Yayun Liu, Chuanyang Wang

Science and Technology of Welding & Joining

DOI

2022

陶瓷生坯边位压裂纹的产生与扩展规律

陈思源，刘亚运，朱琦，江镒志，刘云龙，时永康

《工具技术》

2022

Study on the substrate surface micro-texturing/carburizing regulating the film-substrate adhesion and wear behavior of DLC coatings

Kedong Zhang, Chuang Zhang, Hai-Shan Li, B. Dong, Xu-hong Guo, Yayun Liu

Diamond and related materials

DOI

2022

Mechanism and factor analysis of welding PC and PASF using magnesium zinc alloy particles as laser-absorbent

Xiaodong Yu, Haiyu Qiao, Zhenyu Chen, Yani Chen, Qian Li, Yayun Liu, Chuanyang Wang

Optics & Laser Technology

DOI

2022

Tribological behavior of CoCrMo artificial knee joint with symmetrically biomimetic textured surfaces on PEEK

Yayun Liu, Qi Zhu, Chuanyang Wang, Jiaqiang Li

Optics & Laser Technology

DOI

2022

Modeling and experiments of the thermal degradation behavior of PMMA during laser transmission welding process

Qing Long, Haiyu Qiao, Xiaodong Yu, Yayun Liu, Chuanyang Wang

International Journal of Heat and Mass Transfer

DOI

2022

Electrochemical dissolution behavior of Ti6Al4V alloy: Effect of microstructure and processing method

Jiaqiang Li, Xin Lin, Hua Tan, Gangxian Zhu, Yayun Liu, K.C. Chan, Shihong Shi

Journal of Materials Processing Technology

DOI

2022

Mechanism and numerical simulation analysis of laser welding 5182 aluminum alloy/PA66 based on surface texture treatment

Chuanyang Wang, Gongda Zhang, Qi Zhu, Hongbing Yang, Can Yang, Yayun Liu

Optics & Laser Technology

DOI

2022

Laser sintering of Al 2 O 3 ‐based green ceramics prepared by different pre‐sintering temperatures

Yayun Liu, Chuanyang Wang, Kedong Zhang

International Journal of Applied Ceramic Technology

DOI

2022

Laser transmission welding of dissimilar transparent thermoplastics using different metal particle absorbents

Xiaodong Yu, Qing Long, Yani Chen, Yayun Liu, Can Yang, Qingbo Jia, Chuanyang Wang

Optics & Laser Technology

DOI

2022

Effect of surface treatments on the laser welding performance of dissimilar materials

Gongda Zhang, Qi Zhu, Hongbing Yang, Can Yang, Yayun Liu, Chuanyang Wang

Journal of Manufacturing Processes

DOI

2021

基于电流单周期控制的成形电火花加工放电能量调控策略研究

刘亚运

《南京理工大学》

2021

An improved cutting force model in micro-milling considering the comprehensive effect of tool runout, size effect, and tool wear

Tong-Shun Liu, Yayun Liu, Kedong Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2021

Machining process modeling of green alumina ceramics in orthogonal cutting and fragmentation process

Yayun Liu, Jian-Xin Deng

The International Journal of Advanced Manufacturing Technology

DOI

2021

Laser transmission welding of Polyarylsulfone using zinc particles absorber

Chuanyang Wang, Xiaodong Yu, Chao Wang, Yayun Liu, Zhixin Xia

Infrared Physics & Technology

DOI

2021

Effect of annealing on quality enhancement of micro-machining green alumina ceramics by laser ablation

Yayun Liu, Chuanyang Wang, Tongshun Liu

Ceramics International

DOI

2020

微织构刀具干切削陶瓷生坯的关键技术及机理研究

刘亚运

《山东大学》

2020

Investigation of the Capabilities of Transverse Magnetic Field Controlled Laser-Induced Plasma Micro-Machining

Yan-Ming Zhang, Yayun Liu, S. Bhandari, Guojun Zhang, Jian-Xin Deng, Zhen Zhang, K. Ehmann

Journal of manufacturing science and engineering

DOI

2019

氧化铝陶瓷生坯切削加工裂纹的离散元仿真研究

王伟，邓建新，刘亚运，张贵梁，葛栋良，李学木

《工具技术》

2019

Effect of micro-textures on cutting fluid lubrication of cemented carbide tools

Dong-Liang Ge, Jian-Xin Deng, Ran Duan, Yayun Liu, Xuemu Li, Hong-Zhi Yue

The International Journal of Advanced Manufacturing Technology

DOI

2019

Material removal behavior in processing green Al2O3 ceramics based on scratch and edge-indentation tests

Yayun Liu, Jian-Xin Deng, Hong-Zhi Yue, Ran Duan, Xuemu Li, K. Ehmann

Ceramics International

DOI

2019

Modifying tribological performances of AISI 316 stainless steel surfaces by laser surface texturing and various solid lubricants

Rong Meng, Jian-Xin Deng, Ran Duan, Yayun Liu, Guiliang Zhang

Optics and Laser Technology

DOI

2019

Effect of derivative cutting on machining performance of micro textured tools

Ran Duan, Jian-Xin Deng, S. Lei, Dong-Liang Ge, Yayun Liu, Xuemu Li

Journal of Manufacturing Processes

DOI

2019

A Study on New Surface Textured Tools for Inhibition of Derivative Cutting

Ran Duan, Jian-Xin Deng, S. Lei, Dong-Liang Ge, Yayun Liu, Xuemu Li

Journal of manufacturing science and engineering

DOI

2019

Effect of surface textures and electrohydrodynamically atomized WS2 films on the friction and wear properties of ZrO2 coatings

Xuemu Li, Jian-Xin Deng, Liang-Liang Zhang, Yayun Liu, Hong-Zhi Yue, Ran Duan, Dong-Liang Ge

Ceramics International

DOI

2019

Effect of surface wettability on tribological properties of Al2O3/TiC ceramic under wet lubrication

Dong-Liang Ge, Jian-Xin Deng, Ran Duan, Xuemu Li, Yayun Liu, Hong-Zhi Yue

DOI

2019

Characterization of green Al 2 O 3 ceramics surface machined by tools with textures on flank‐face in dry turning

Yayun Liu, Jian-Xin Deng, W. Wang, Ran Duan, You-Qiang Xing

International Journal of Applied Ceramic Technology

DOI

2018

硬质合金表面正弦微织构对其摩擦磨损性能的影响研究

张贵梁，邓建新，葛栋良，王伟，张翔，刘亚运

《工具技术》

2018

ZrO2陶瓷生坯表面微织构制备工艺的研究

刘亚运，刘莉莉，邓建新，王伟，葛栋良，张贵梁

《工具技术》

2018

Improving tribological performance of cemented carbides by combining laser surface texturing and W-S-C solid lubricant coating

Rong Meng, Jian-Xin Deng, Yayun Liu, Ran Duan, Guiliang Zhang

DOI

2018

Tribological properties of WS2 coatings deposited on textured surfaces by electrohydrodynamic atomization

Xuemu Li, Jian-Xin Deng, Lili Liu, Liang-Liang Zhang, Jie Sun, Dong-Liang Ge, Yayun Liu, Ran Duan

Surface & Coatings Technology

DOI

2018

An approach to predict derivative-chip formation in derivative cutting of micro-textured tools

Ran Duan, Jian-Xin Deng, Dong-Liang Ge, X. Ai, Yayun Liu, Rong Meng, Jin-Tao Niu, Guijie Wang

DOI

2018

A thermo-mechanical coupled model of derivative cutting of microtextured tools

Ran Duan, Jian-Xin Deng, Dong-Liang Ge, X. Ai, Yayun Liu, Rong Meng, Xuemu Li, Hui Chen

The International Journal of Advanced Manufacturing Technology

DOI

2018

Effect of nano-scale texture pretreatment on wear resistance of WC/Co tools with/without TiAlN coated flank-face in dry turning of green Al2O3 ceramics

Yayun Liu, Jian-Xin Deng, Lili Liu, W. Wang, Rong Meng, Ran Duan, Dong-Liang Ge, Xuemu Li

Ceramics International

DOI

2018

Effect of texture parameters on cutting performance of flank-faced textured carbide tools in dry cutting of green Al2O3 ceramics

Yayun Liu, Jian-Xin Deng, W. Wang, Ran Duan, Rong Meng, Dong-Liang Ge, Xuemu Li

Ceramics International

DOI

2017

大气压射频等离子体光强测量系统的设计

刘亚运，李占贤

《机械工程与自动化》

2017

基体表面纳织构化对AlCrN涂层刀具界面结合强度影响的研究

张翔，邓建新，张贵梁，葛栋梁，王伟，刘亚运

《工具技术》

2017

パルスレーザアブレーションによる緑色ZrO_2セラミックス上への微小組織化溝の作製【Powered by NICT】

Yayun Liu, Lili Liu, Jian-Xin Deng, Rong Meng, Xue-Qian Zou, Feng-Fang Wu

2017

Experimental assessment of derivative cutting of micro-textured tools in dry cutting of medium carbon steels

Ran Duan, Jian-Xin Deng, X. Ai, Yayun Liu, Hui Chen

DOI

2017

Wear resistance of carbide tools with textured flank-face in dry cutting of green alumina ceramics

Yayun Liu, Jian-Xin Deng, Feng-Fang Wu, Ran Duan, Xiang Zhang, Yun-He Hou

DOI

2017

グリーンアルミナセラミックの乾式切削における組織化逃げ面を有する超硬工具の耐摩耗性【Powered by NICT】

Yayun Liu, Jian-Xin Deng, Feng-Fang Wu, Ran Duan, Xiang Zhang, Yun-He Hou

2017

Fabrication of micro-scale textured grooves on green ZrO2 ceramics by pulsed laser ablation

Yayun Liu, Lili Liu, Jian-Xin Deng, Mengyao Rong, Xue-Qian Zou, Feng-Fang Wu

DOI

2016

硬质合金刀具车削氧化铝陶瓷生坯的磨损机理研究

刘亚运，邓建新，张翔，侯云鹤，邹雪倩，吴凤芳

《工具技术》

2015

织构化AlCrN涂层表面的摩擦磨损性能研究

高鹏，邓建新，刘亚运，陈帅，姜超

《工具技术》

2015

Effect of micro/nano-scale textures on anti-adhesive wear properties of WC/Co-based TiAlN coated tools in AISI 316 austenitic stainless steel cutting

Kedong Zhang, Jian-Xin Deng, Jia-Lin Sun, Chao Jiang, Yayun Liu, Shuai Chen

DOI

精选作品

期刊论文

Study on the Low-Damage Mechanism of Green ZrO2 Ceramics Under Ultrasonic Elliptical Vibration-Assisted Cutting

Novel double-sided laser welding approach for strength enhancement and defect mitigation in wide-gap glass joints

Pre-sintered Csf/Al2O3 ceramics toughening mechanisms and cutting performance enhancement by ultrasonic elliptical vibration-assisted cutting strengthening

对称双旋流器分离效果的数值模拟探究

扫描次数对准同步激光玻璃焊接焊缝成形影响

晶圆清洗工艺中气液两相流喷嘴的喷雾特性

Enhancing tribological performance of CBN materials by Fe3O4 nanofluid and wedge-shaped micro-texture considering electroosmosis effect

A strong mechanical riveting structure in PC and PBT/GF induced by dual-wavelength during laser transmission welding

Study on the forming and strengthening mechanism of textured AlN-PC welded joints by a dual-wavelength laser welding

Improvements in Wettability and Tribological Behavior of Zirconia Artificial Teeth Using Surface Micro-Textures

Enhancing the welding joint strength of aluminum nitride ceramic and polycarbonate by micro-texture treatment

High-precision weld width detection in laser transmission welding via crow and wolf optimized neural networks

Mechanistic optimization of wide-gap ultrafast laser quartz glass welding with plasma dynamics

Mechanism analysis of laser welding strength improvement of dissimilar materials based on surface micro-texture

Mechanical and Thermal Properties of 3D-Printed Continuous Bamboo Fiber-Reinforced PE Composites

Anti-wear behaviors of nanofluids at the micro-textured tool/chip interface of CBN tools with electromagnetic field effects

Frictional Behavior and Fluid Flow Simulation Analysis of Textured ZrO2–Polyetheretherketone Artificial Knee Joints

Innovative lightweight flexibility test platform for RV reducer with topology optimization and 3-D printing

基于数字孪生技术的智能制造专业教学模式探索

基于OBE的“机械制图”课程持续改进建设研究与实践

Enhancing the bonding strength and tribological performance of PVD coatings by liquid-assisted laser post-processing

Mechanism analysis of dual wavelength laser welding AlN-PC joint based on microtexture treatment

Neural-driven viscosity modeling and fatigue optimization for cycloidal gear systems

The effects of laser line energy on welding strength of PASF/PC using magnesium zinc alloy powders as absorbents in laser transmission welding

三种不同刀具干切削Al2O3陶瓷生坯切削加工性能研究

“智能制造导论”课程思政教学改革探索

面向《机械制图》课程的逆向教学体系创新研究

表面微结构对铝合金与PA66激光焊性能影响

Effect of nano∖micro‐textures on the enhancement of tool wear resistance in green ceramics processing

Study on the surface damage of green ZrO 2 ceramics in dry cutting based on discrete element method

An integrated methodology for estimating the interface temperature and effects of powder diameters in laser transmission welding process

陶瓷生坯边位压裂纹的产生与扩展规律

Study on the substrate surface micro-texturing/carburizing regulating the film-substrate adhesion and wear behavior of DLC coatings

Mechanism and factor analysis of welding PC and PASF using magnesium zinc alloy particles as laser-absorbent

Tribological behavior of CoCrMo artificial knee joint with symmetrically biomimetic textured surfaces on PEEK

Modeling and experiments of the thermal degradation behavior of PMMA during laser transmission welding process

Electrochemical dissolution behavior of Ti6Al4V alloy: Effect of microstructure and processing method

Mechanism and numerical simulation analysis of laser welding 5182 aluminum alloy/PA66 based on surface texture treatment

Laser sintering of Al 2 O 3 ‐based green ceramics prepared by different pre‐sintering temperatures

Laser transmission welding of dissimilar transparent thermoplastics using different metal particle absorbents

Effect of surface treatments on the laser welding performance of dissimilar materials

基于电流单周期控制的成形电火花加工放电能量调控策略研究

An improved cutting force model in micro-milling considering the comprehensive effect of tool runout, size effect, and tool wear

Machining process modeling of green alumina ceramics in orthogonal cutting and fragmentation process

Laser transmission welding of Polyarylsulfone using zinc particles absorber

Effect of annealing on quality enhancement of micro-machining green alumina ceramics by laser ablation

微织构刀具干切削陶瓷生坯的关键技术及机理研究

Investigation of the Capabilities of Transverse Magnetic Field Controlled Laser-Induced Plasma Micro-Machining

氧化铝陶瓷生坯切削加工裂纹的离散元仿真研究

Effect of micro-textures on cutting fluid lubrication of cemented carbide tools

Material removal behavior in processing green Al2O3 ceramics based on scratch and edge-indentation tests

Modifying tribological performances of AISI 316 stainless steel surfaces by laser surface texturing and various solid lubricants

Effect of derivative cutting on machining performance of micro textured tools

A Study on New Surface Textured Tools for Inhibition of Derivative Cutting

Effect of surface textures and electrohydrodynamically atomized WS2 films on the friction and wear properties of ZrO2 coatings

Effect of surface wettability on tribological properties of Al2O3/TiC ceramic under wet lubrication

Characterization of green Al 2 O 3 ceramics surface machined by tools with textures on flank‐face in dry turning

硬质合金表面正弦微织构对其摩擦磨损性能的影响研究

ZrO2陶瓷生坯表面微织构制备工艺的研究

Improving tribological performance of cemented carbides by combining laser surface texturing and W-S-C solid lubricant coating

Tribological properties of WS2 coatings deposited on textured surfaces by electrohydrodynamic atomization

An approach to predict derivative-chip formation in derivative cutting of micro-textured tools

A thermo-mechanical coupled model of derivative cutting of microtextured tools

Effect of nano-scale texture pretreatment on wear resistance of WC/Co tools with/without TiAlN coated flank-face in dry turning of green Al2O3 ceramics

Effect of texture parameters on cutting performance of flank-faced textured carbide tools in dry cutting of green Al2O3 ceramics

大气压射频等离子体光强测量系统的设计

基体表面纳织构化对AlCrN涂层刀具界面结合强度影响的研究

パルスレーザアブレーションによる緑色ZrO_2セラミックス上への微小組織化溝の作製【Powered by NICT】

Experimental assessment of derivative cutting of micro-textured tools in dry cutting of medium carbon steels

Wear resistance of carbide tools with textured flank-face in dry cutting of green alumina ceramics

グリーンアルミナセラミックの乾式切削における組織化逃げ面を有する超硬工具の耐摩耗性【Powered by NICT】

Fabrication of micro-scale textured grooves on green ZrO2 ceramics by pulsed laser ablation

硬质合金刀具车削氧化铝陶瓷生坯的磨损机理研究

织构化AlCrN涂层表面的摩擦磨损性能研究

Effect of micro/nano-scale textures on anti-adhesive wear properties of WC/Co-based TiAlN coated tools in AISI 316 austenitic stainless steel cutting

预印本

Study on the Cutting Performance Of Ultrasonic Vibration-Assisted Machining of Green Zro 2 Ceramics