景财年｜山东建筑大学｜学者主页

2026

基于DEFORM的轴类大锻件锻造数值模拟与工艺研究

杨建奇，景财年，林涛，杨后雷，涂英明，常福华，朱伟华，杨轩，张浩东，王心茹

《中国铸造装备与技术》

2026

Effect of MAX Phase: Ti3AlC2 on Microstructure and Properties of Nickel-Based Coatings by Laser Cladding

Xuan Yang, Tao Lin, Cainian Jing, Yingming Tu, Jie Zhao, Fei Ni, Xinyu Yang, Jianqi Yang

Journal of Materials Engineering and Performance

DOI

2026

EFFECT OF WC MASS FRACTION ON THE MICROSTRUCTURE AND PROPERTIES OF 316L COATINGS PREPARED BY LASER CLADDING

Xuan Yang, Cainian Jing, Tao Lin, Xinyu Yang, Yingming Tu, Jianqi Yang, Zhiguo Zhang

Surface Review and Letters

DOI

2026

Composition design and its effect on amorphous content and wear resistance in Fe-based coatings prepared by laser cladding

Zhiguo Zhang, Tao Lin, Yizhen Ma, Jiahao Xu, Ke Zhang, Yingming Tu, Tongguang Zhai, Cainian Jing, Li Liu

Journal of Materials Science

DOI

2026

Regulation of microstructure and deformation mechanism in heterogeneous austenitic cold-rolled medium manganese steel

Hengbin Liu, Cainian Jing, Tao Lin, Yingming Tu, Can Peng, Xinghui Li, Jidong Zhang, Xinyu Yang

Materials Science and Technology

DOI

2026

Effect of Heterogeneous Distribution of Mn on Austenite Stability and Mechanical Properties of Cold-rolled Medium Manganese Steel

Can Peng, Cainian Jing, Tao Lin, Yingming Tu, Hengbin Liu, Xinghui Li, HaoDong Zhang

Journal of Materials Engineering and Performance

DOI

2026

Formation and misorientation transition of shuttle Cu/Ti heterostructures in accumulative roll bonding process

Zhiguo Zhang, Yingming Tu, Yan Ma, Jie Zhao, Jing Li, Ke Zhang, Y. Liu, Tongguang Zhai, Cainian Jing

Journal of Alloys and Compounds

DOI

2025

化学成分、熔炼工艺和热处理工艺对超大型17-4PH钢锻件力学性能的影响

杨后雷，彭灿，景财年，林涛，刘少斌，张吉冬，刘恒斌，肖广帅，沈元国，杨清

《中国铸造装备与技术》

2025

大型轴类锻件调质后缺陷扩展原因分析及对策

王峰，常福华，刘剑辉，景财年，谷云浩

《冶金与材料》

2025

Effect of Mo content on microstructure and mechanical properties of CoCrFeNiMox (x = 0, 0.2, 0.5, 1) high entropy alloy coatings

Weimin Guo, Linan Tian, Huixia Xu, Long Liu, Dexiao Dong, Cainian Jing, Ning Ding, Na Xu, Xiaofeng Wu, Lizong Chen

Materials Characterization

DOI

2025

Springback control of Ti2AlNb alloy ultra-thin corrugated sheets via current-targeted loading during current-assisted roll forming process

Jie Zhao, Chengqian Wang, Yingming Tu, Min Cui, Cainian Jing

Scientific Reports

DOI

2025

EFFECT OF Ti CONTENT ON MICROSTRUCTURE AND PROPERTIES OF Ni60/Cr 3 C 2 /AlN COATINGS BY LASER CLADDING

XINYU YANG, Cainian Jing, Tao Lin, Yingming Tu, Zhenwei Li, Xuan Yang

Surface Review and Letters

DOI

2025

Effect of Ti content on microstructure evolution and properties of Ni50A-B4C coatings

Zhenwei Li, Tao Lin, Liang Li, Cainian Jing, Yingming Tu, Nana Liu, Xuan Yang

Ceramics International

DOI

2025

Effect of annealing temperature on microstructure and mechanical properties of hot-rolled medium-Mn steel

Qiuyue Huang, Cainian Jing, Liang Li, Tao Lin, Jinbiao Wu, Yuhang Zhu, Yingming Tu

Ironmaking & Steelmaking Processes Products and Applications

DOI

2025

Effect of titanium carbide addition on the microstructure and properties of nickel‐based alloy coatings

Z. Li, Tao Lin, Cainian Jing, Y. Tu, T. Fu, B. Xuan

Materialwissenschaft und Werkstofftechnik

DOI

2025

Molecular Dynamics Simulation of Cu/Ti Heterogeneous Interface Evolution and the Elemental Diffusion Behavior

Yingming Tu, Ke Cheng, Jinlong Li, Tongguang Zhai, Cainian Jing

JOM

DOI

2025

RESEARCH OF MICROSTRUCTURE AND PROPERTIES OF ULTRASONIC VIBRATION-ASSISTED LASER CLADDING OF AlCoCrFeNi HIGH-ENTROPY ALLOY COATINGS

Tao Lin, ZHENWEI LI, Zhaotong Li, Nana Liu, Cainian Jing, Jingrui Zhao, Weimin Guo

Surface Review and Letters

DOI

2025

Effect of Partitioning Time on the Microstructure and Evolution of Medium Mn Q&P Steel

Can Peng, Cainian Jing, Tao Lin, Yingming Tu, Hengbin Liu, Jinyue Kang, Xinghui Li, Zejiao Liu, Xuan Yang, Jinbiao Wu, Jingrui Zhao

The Physics of Metals and Metallography

DOI

2025

Effect and mechanism of shuttle-heterostructure interfacial microalloying on mechanical properties of Cu/Ti composite plates prepared by accumulative roll bonding process

Yingming Tu, Ke Cheng, Min Cui, Jie Zhao, Zihan Liu, Tongguang Zhai, Cainian Jing

Materials Science and Engineering A

DOI

2025

Effect of B4C content on microstructure and properties of AlCoCrFeNi coatings by laser cladding

Nana Liu, Cainian Jing, Tao Lin, Yingming Tu, Tinglin Fu, Zhenwei Li

Journal of Materials Science

DOI

2024

中锰Q&P钢微观组织演变和力学性能分析

李宁，景财年，林涛，徐俊杰，翟浩然，李建杰，杨楚，刘泽姣

《中国铸造装备与技术》

2024

Effect of Partition Temperature on Microstructure and Mechanical Properties of Cold‐Rolled Medium‐Manganese Steel

Yuhang Zhu, Guocheng Ren, Cainian Jing, Tao Lin, Yingming Tu

steel research international

DOI

2024

Effect of Ti and WC on the Microstructure and Mechanical Properties of Laser Cladding AlCoCrFeNi High-Entropy Alloys

Nana Liu, Cainian Jing, Tao Lin, Yingming Tu, Tinglin Fu

Protection of Metals and Physical Chemistry of Surfaces

DOI

2024

Influence of Ti element on the microstructure and crack of modulated WC-strengthened Ni-based alloy coatings by laser cladding

Zhenwei Li, Tao Lin, Cainian Jing, Yingming Tu, Tinglin Fu, Nana Liu

Materials Today Communications

DOI

2024

Effect of dislocation density on microstructure and mechanical properties of cold-rolled medium Mn steel

Jinbiao Wu, Cainian Jing, Tao Lin, Tao Lin, Junjie Xu, Can Peng, Tinglin Fu, Tinglin Fu, Bin Xuan

Materials Science and Technology

DOI

2024

EFFECT OF TiC ADDITION ON MICROSTRUCTURE AND PROPERTIES OF LASER CLADDING AlCoCrFeNi2.1 COATINGS ON H13 STEEL

Chu Yang, Cainian Jing, Ning Li, JUNJIE XU, Zejiao Liu, Tao Lin, Jingrui Zhao, Weimin Guo

Surface Review and Letters

DOI

2024

Effect of annealing time on microstructure and mechanical properties of Fe–C–Mn–Al–Si steel

Junjie Xu, Wei Zheng, Cainian Jing, Tao Lin, Ning Li, Tongguang Zhai

Materials Science and Technology

DOI

2023

高强韧中锰钢研究现状及发展趋势

景财年，刘磊，林涛，赵静蕊

《上海金属》

2023

Effect of TiC addition on the microstructure and properties of laser cladding Ni60A coatings on H13 steel surface

Chu Yang, Cainian Jing, Tinglin Fu, Tao Lin, Weimin Guo, Nana Liu

Materials Today Communications

DOI

2023

The Effect of Strain Rate on the Microstructure and Mechanical Properties of Q&P 980 Steel

Zhonglin Wu, Cainian Jing, Yan Feng, Zhaotong Li, Jingrui Zhao, Tao Lin

The Physics of Metals and Metallography

DOI

2023

Effect of CeO2 on the microstructure and properties of AlCoCrFeNi2.1 laser cladding coatings

Chu Yang, Cainian Jing, Tinglin Fu, Tao Lin, Weimin Guo, Nana Liu

Journal of Alloys and Compounds

DOI

2023

Microstructure performance and Nano-Effect of laser alloying composites with Multi-Phase on TA1 titanium alloy

Jianing Li, Bin Chen, Meng Wang, Cainian Jing, Zeyong Fan, Zhao Zhang, Yajiang Li, Chunyu Zhang

Optics & Laser Technology

DOI

2023

Effects of different annealing time on microstructure and mechanical properties of lightweight Al-containing medium-Mn steel

Zhonglin Wu, Cainian Jing, Yan Feng, Zhaotong Li, Tao Lin, Jingrui Zhao

Ironmaking & Steelmaking Processes Products and Applications

DOI

2023

Effect of partitioning temperature on the microstructure and evolution of medium manganese steel

Zejiao Liu, Cainian Jing, Tao Lin, Junjie Xu, Chu Yang, Ning Li, Jingrui Zhao

Ironmaking & Steelmaking Processes Products and Applications

DOI

2023

Microstructure and mechanical properties of medium manganese steel in intercritical annealing

Yan Feng, Cainian Jing, Tao Lin, Zhonglin Wu, Zhaotong Li, Jingrui Zhao

Materials Science and Technology

DOI

2023

Phase evolution and properties of AlxCoCrFeNi high-entropy alloys coatings by laser cladding

Zhaotong Li, Cainian Jing, Yan Feng, Zhonglin Wu, Tao Lin, Jingrui Zhao

Materials Today Communications

DOI

2023

WEAR RESISTANCE AND MICROSTRUCTURE OF THE CeO2-MODIFIED STELLITE6 BASE TUNGSTEN INERT GAS CLAD COMPOSITE COATINGS ON THE Ti–6Al–4V ALLOY

Meng Wang, JIANING LI, Cainian Jing, ZEYONG FAN, Yu Cheng Pan, CHUNYU ZHANG, Yajiang Li

Surface Review and Letters

DOI

2022

基于Deform-3D的风机主轴空心轴预制坯成形优化

赵顺治，景财年，林涛，刘磊，张志浩

《锻压技术》

DOI

2022

热处理工艺对硅锰钢组织和力学性能的影响

张志浩，景财年，吴忠林，刘磊，林涛，赵静蕊，赵顺治

《中国铸造装备与技术》

2022

应变速率对热冲压淬火-配分钢显微组织与力学性能的影响

吴聪，景财年，林涛，叶道珉，雷启腾

《材料工程》

2022

Microstructures and corrosion resistance enhancement of ultrasonic vibration-assisted medium entropy alloy base laser multi-phase coating

Zhao Zhang, Jianing Li, Zeyong Fan, Zhiyun Ye, Yajiang Li, Chunyu Zhang, Cainian Jing

Surface and Coatings Technology

DOI

2022

Influence of Partitioning Temperature on Microstructure and Mechanical Performance of Medium Manganese Fe-C-Mn-Cu-Cr-Mo-Nb Steel

Tao Lin, Yan Feng, Lei Liu, Cainian Jing, Zhonglin Wu, Zhaotong Li, Jingrui Zhao

Metals

DOI

2022

Effect of a new pretreatment-Q&P process on the microstructure and mechanical properties of light-weight Al-containing medium-Mn steels

Zhonglin Wu, Cainian Jing, Yan Feng, Zhaotong Li, Tao Lin, Jingrui Zhao, Lei Liu

Materials Science and Engineering A

DOI

2022

Effect of Cyclic Quenching on the Austenite Stability and Work Hardening Behavior of Medium-Mn Quenching and Partitioning Steel Enabled by Intercritical Annealing

Lei Liu, Bohan Shan, Z. H. Zhang, T. T. Li, Song-shan Zhao, Cainian Jing, T. Lin, Jingrui Zhao

The Physics of Metals and Metallography

DOI

2022

Effect of a New Prestrain, Intercritical Annealing, Quenching, and Partitioning Process on the Microstructure and Mechanical Properties of Medium‐Manganese Steels

Zhonglin Wu, Cainian Jing, Yan Feng, Zhaotong Li, Tao Lin, Jingrui Zhao

steel research international

DOI

2022

Microstructure evolution and properties of laser cladding Nb containing eutectic high entropy alloys

Zhaotong Li, Cainian Jing, Yan Feng, Zhonglin Wu, Tao Lin, Jingrui Zhao

International Journal of Refractory Metals and Hard Materials

DOI

2022

INFLUENCE OF TiC CONTENT ON MICROSTRUCTURE AND PROPERTIES OF AlCoCrFeNi HIGH-ENTROPY ALLOY COATINGS PREPARED BY LASER CLADDING

Zhaotong Li, Cainian Jing, Yan Feng, Zhonglin Wu, Tao Lin, Jingrui Zhao, Lei Liu

Surface Review and Letters

DOI

2022

Effect of retained austenite on the microstructure and mechanical properties of cold-rolled medium-manganese Q&P steel

Yan Feng, Cainian Jing, Tao Lin, Zhonglin Wu, Zhaotong Li, Jingrui Zhao

Ironmaking & Steelmaking Processes Products and Applications

DOI

2022

Effect of different matrix structure in medium-Mn quenching and partitioning steel on austenite stability and work hardening behavior

Lei Liu, Cainian Jing, Borong Shan, Zhihao Zhang, Shunzhi Zhao, Tao Lin, Jingrui Zhao

Materials Today Communications

DOI

2022

Deformation Behavior and Microstructure Evolution during Equal Channel Angular Pressing of Pure Aluminum

Shubo Xu, Hanlin Wang, Peng Liu, Cainian Jing, Guocheng Ren

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2022

Microstructure and Excellent Performance Enhancement of Mea Base Composites with Multi-Phase Induced by Ultrasonic Assisted Laser Technology

Zhao Zhang, Jianing Li, Binbin Zhao, Chunyu Zhang, Molin Su, Chuanjie Li, Yajiang Li, Cainian Jing

Journal of Alloys and Compounds

DOI

2021

等通道弯角挤压过程有限元分析与挤压模具优化设计

徐淑波，孙化鑫，任国成，景财年，李婷婷

《中国铸造装备与技术》

2021

汽车后备箱底板覆盖件成型的有限元分析

徐淑波，薛现猛，任国成，景财年

《模具技术》

2021

模具几何形状对镁合金ECAP变形均匀性的影响

徐淑波，孙海波，刘婷，景财年，刘鹏

《锻压装备与制造技术》

DOI

2021

AZ31镁合金剧烈塑性变形过程分析与力学性能研究

徐淑波，刘建营，任国成，景财年，刘鹏

《塑性工程学报》

2021

纯铝圆形挤压件等通道弯角挤压微观组织与力学性能

徐淑波，张森，景财年，林晓娟，刘鹏

《塑性工程学报》

2021

大型环锻件轧制研究现状与展望

李兆通，李亮，景财年，林涛，冯燕，吴忠林，赵顺治

《中国铸造装备与技术》

2021

大型环件径轴向轧制成形仿真及试验研究

赵顺治，林涛，郭卫民，张志浩，刘磊，景财年

《中国铸造装备与技术》

2021

Microstructure evolution of a multi-track AlCoCrFeNi high entropy alloy coating fabricated by laser cladding

Weimin Guo, Ning Ding, Guoqiang Liu, Cainian Jing, Huixia Xu, Long Liu, Na Xu, Xiaofeng Wu, Jianqun He, Fahmi Zaïri

Materials Characterization

DOI

2021

ENHANCING HIGH-TEMPERATURE OXIDATION RESISTANCE OF TITANIUM ALLOY WITH KF110-B4C-Ag THROUGH LASER TECHNOLOGY

Zhao Zhang, Jianing Li, Zhiyun Ye, Cainian Jing, Meng Wang, TINGTING LI, Xigui Sun

Surface Review and Letters

DOI

2021

Microstructure performance enhancement of Si 3 N 4 reinforced laser clad KF110 base composite coatings

Zhao Zhang, Jianing Li, Xigui Sun, Fukun Ma, Zhuanzhuan Zhang, Chuanwei Shi, Yajiang Li, Chuanjie Li, Bo Zhao, Zhangyan Liu, Xinyi Jiang, Qingwei Liu, Shunxi Han, Cainian Jing

International Journal of Applied Ceramic Technology

DOI

2021

Investigation of the Wear Behavior of Surface Welding AZ91 and AZ91+Gd Alloys under Variable Loading Conditions

Qingqiang Chen, Yalei Yu, Jie Sun, Cainian Jing, Yanhua Zhao, Jia Wang

Crystals

DOI

2021

EFFECT OF C-Mn PARTITIONING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TRIP STEEL

Cainian Jing, Qiteng Lei, Tao Lin, Daomin Ye, Cong Wu, Jingrui Zhao, Shubo Xu

Materiali in tehnologije

DOI

2021

Effect of hot stamping and quenching & partitioning process on microstructure and mechanical properties of ultra-high strength steel

Cainian Jing, Daomin Ye, Jingrui Zhao, Tao Lin, Cong Wu, Qiteng Lei

Materials Research Express

DOI

2021

Laser nano-technology of light materials: Precision and opportunity

Zhiyun Ye, Molin Su, Jianing Li, Cainian Jing, Shubo Xu, Liqiang Liu, Guocheng Ren, Xiaolin L. Wang

Optics & Laser Technology

DOI

2021

Study on dislocation and microstructural properties of friction stir welded joint for 2024-T4 aluminum alloys

Zhang Geming, Peng Liu, Shi Qingyu, Shubo Xu, Jianing Li, Feng Keyun, Jing Cainian

Kovove Materialy-Metallic Materials

DOI

2020

应变速率对汽车用高强钢组织和性能的影响

候玉栋，景财年，丁啸云，吴聪

《金属热处理》

2020

Surface reinforcements of TA15 titanium alloy with laser induced Co base multiphase composites

Jianing Li, Zhiyun Ye, Cainian Jing, Shubo Xu, Fusheng Yu, Kegao Liu, Xigui Sun, Shushuai Liu, Fan Cao, Liqiang Liu, Xiaolin L. Wang

Optics & Laser Technology

DOI

2020

LASER SURFACE REINFORCEMENT OF THE Ti/Al TIG WELDED JOINT

Zhiyun Ye, Jianing Li, Juan Wang, Shubo Xu, Cainian Jing, Yanhua Zhao, Guanchao Li, Xinzhu Gan, Fukun Ma, Fusheng Yu

Surface Review and Letters

DOI

2020

Effect of Different Isothermal Time on Microstructure and Mechanical Property of the Low-Carbon Steel Treated by Dual-Stable C-Mn Partitioning Process

Cainian Jing, Xiaoyun Ding, Daomin Ye, Jingrui Zhao, Tao Lin, Shubo Xu

Scanning

DOI

2020

Improving mechanical properties of ZK60 magnesium alloy by cryogenic treatment before hot extrusion

Tao Lin, Jixue Zhou, Cainian Jing, Yunteng Liu, Linlin Zhang, Xiangbin Meng

High Temperature Materials and Processes

DOI

2019

焊接电流对不等厚异质高强钢点焊接头组织性能的影响

王宜文，景财年

《内燃机与配件》

DOI

2018

剧烈塑性变形对AZ31镁合金微观组织演化的影响

徐淑波，张小东，景财年，林晓娟，刘鹏

《稀有金属材料与工程》

2017

高强度淬火-配分钢的研究现状及发展方向

涂英明，景财年

《金属热处理》

2016

焊接速度对DP590双相钢板激光焊接接头组织和性能的影响

涂英明，景财年，范吉超，倪晓梅，刘鹏，李怀学

《机械工程材料》

2016

热成形钢烘烤硬化性能研究

冯雪莹，景财年，陈辉，张勇

《现代商贸工业》

2016

两相区保温及Q&P工艺对改善钢组织性能的分析

陈辉，景财年，涂英明，张勇

《山东建筑大学学报》

2016

热成形技术在汽车轻量化中的应用与发展

陈辉，景财年

《金属热处理》

2016

Microstructure and physical performance of laser-induction nanocrystals modified high-entropy alloy composites on titanium alloy

Jianing Li, Werner Craeghs, Cainian Jing, Shuili Gong, Feihu Shan

Materials & Design

DOI

2016

Microstructure and precipitated phase in the thermo-mechanically affected zone of friction stir welded joint for 2024 aluminium alloy

Peng Liu, Liu Guo-liang, Deng Zhou Yan, Jianing Li, Jing Cainian, FENG KEYUN

Kovove Materialy-Metallic Materials

DOI

2015

激光焊接异种钢接头微观结构及耐蚀性

景财年，范吉超，王华，徐淑波，刘鹏

《材料热处理学报》

2015

激光焊接TRIP590钢焊缝微观结构及形成机理研究

景财年，范吉超，王丛雷，徐淑波，刘鹏，李怀学

《中国激光》

2014

激光焊接工艺对TRIP590钢焊接接头组织性能的影响

景财年，倪晓梅，范吉超，刘鹏，李怀学，邱坤伦，张勇

《材料热处理学报》

2014

焊接速度对TRIP590钢激光焊接头组织性能的影响

景财年，倪晓梅，李怀学，刘鹏，范吉超，于承雪

《材料热处理学报》

2014

激光焊接不等厚异种钢接头组织与性能研究

景财年，范吉超，倪晓梅，李怀学，刘鹏，张宜生

《中国激光》

2013

AZ31镁合金等通道转角挤压工艺优化与实验研究

刘婷，徐淑波，任国成，景财年

《燕山大学学报》

2013

剧烈塑性变形对块状镁合金微观组织和力学性能的影响

刘婷，徐淑波，秦振，景财年，任国成

《有色金属科学与工程》

2012

相变诱发塑性钢的组织性能

景财年

2012

剧烈塑性变形对AZ31镁合金显微组织和力学性能的影响(英文)

徐淑波，秦振，刘婷，景财年，任国成

Transactions of Nonferrous Metals Society of China

2012

TRIP钢中合金元素对相变诱发塑性的影响

刘敬广，景财年，甘洋洋，于承雪

《山东建筑大学学报》

2012

激光熔覆裂纹的形成机理及控制方法

于承雪，景财年，李怀学

《航空制造技术》

2012

Effect of severe plastic deformation on microstructure and mechanical properties of bulk AZ31 magnesium alloy

Shubo Xu, Zhen Qin, Ting Liu, Cainian Jing, Guocheng Ren

Transactions of Nonferrous Metals Society of China

DOI

2009

贝氏体区等温时间对低硅TRIP钢组织和力学性能的影响

景财年，陈晓辉，刘在学，谭启忠，李亮

《特殊钢》

2009

CMnAlCu-TRIP钢组织和力学性能研究

景财年，刘在学，王作成，谭启忠，金成俊

《材料热处理学报》

DOI

2009

Microstructure and mechanical behavior of cold-rolled CMnAlSi TRIP-aided steel sheets

Cainian Jing, Ming-gang WANG, Zuo-cheng WANG, Qi-zhong TAN, Sung-Joon Kim

Transactions of Nonferrous Metals Society of China

DOI

2008

临界区退火处理对0.15C-1.5Mn-1.5Al冷轧TRIP钢相变和力学性能的影响

景财年，刘在学，王作成，王明刚，金成俊

《工程科学学报》

2008

铁素体区轧制对超低碳钢和无间隙原子钢组织和力学性能的影响

韩福涛，王作成，景财年，张文平，郭卫民

《金属热处理》

2007

贝氏体等温温度对CMnAl-TRIP钢性能的影响

景财年，刘在学，王作成，林晓娟，金成俊

《材料热处理学报》

DOI

2006

铁素体区热轧Ti-IF钢的组织和性能

景财年，王作成，韩福涛，张文平，衣彦宏

《特殊钢》

2006

0.2C-1.5Mn-1.5Si相变诱发塑性(TRIP)钢板在烤漆过程中的组织和力学性能变化

王作成，景财年，衣颜宏，张文平，金成俊

《金属热处理》

2006

热轧Ti-IF钢析出物的研究

景财年，王作成，韩福涛，衣彦宏，张文平

《金属热处理》

2006

添加0.5%铜及贝氏体化对0.2C-1.5Mn-1.5Si形变诱发塑性(TRIP)钢板组织和力学性能的影响

王作成，景财年，肖宁宁，苏士强，王华，金成俊

《金属热处理》

2005

退火温度对0.2C-1.5Si-1.5Mn-(0.5Cu)TRIP钢组织的影响

景财年，王作成，李长龙，罗辉，李成美，刘一梅

《特殊钢》

2005

相变诱发塑性的影响因素研究进展

景财年，王作成，韩福涛

《金属热处理》

2004

焊接结构弯曲变形实验研究

罗辉，霍玉双，王国凡，张元彬，景财年

《实验室研究与探索》

2004

TRIP-相变诱发塑性钢的研究进展

景财年，王作成

《特殊钢》

2004

铜元素和退火温度对TRIP冷轧钢板组织和力学性能的影响

景财年，王作成，金成俊，李昌吉，李泰皓

《金属热处理》

精选作品

期刊论文

基于DEFORM的轴类大锻件锻造数值模拟与工艺研究

Effect of MAX Phase: Ti3AlC2 on Microstructure and Properties of Nickel-Based Coatings by Laser Cladding

EFFECT OF WC MASS FRACTION ON THE MICROSTRUCTURE AND PROPERTIES OF 316L COATINGS PREPARED BY LASER CLADDING

Composition design and its effect on amorphous content and wear resistance in Fe-based coatings prepared by laser cladding

Regulation of microstructure and deformation mechanism in heterogeneous austenitic cold-rolled medium manganese steel

Effect of Heterogeneous Distribution of Mn on Austenite Stability and Mechanical Properties of Cold-rolled Medium Manganese Steel

Formation and misorientation transition of shuttle Cu/Ti heterostructures in accumulative roll bonding process

化学成分、熔炼工艺和热处理工艺对超大型17-4PH钢锻件力学性能的影响

大型轴类锻件调质后缺陷扩展原因分析及对策

Effect of Mo content on microstructure and mechanical properties of CoCrFeNiMox (x = 0, 0.2, 0.5, 1) high entropy alloy coatings

Springback control of Ti2AlNb alloy ultra-thin corrugated sheets via current-targeted loading during current-assisted roll forming process

EFFECT OF Ti CONTENT ON MICROSTRUCTURE AND PROPERTIES OF Ni60/Cr 3 C 2 /AlN COATINGS BY LASER CLADDING

Effect of Ti content on microstructure evolution and properties of Ni50A-B4C coatings

Effect of annealing temperature on microstructure and mechanical properties of hot-rolled medium-Mn steel

Effect of titanium carbide addition on the microstructure and properties of nickel‐based alloy coatings

Molecular Dynamics Simulation of Cu/Ti Heterogeneous Interface Evolution and the Elemental Diffusion Behavior

RESEARCH OF MICROSTRUCTURE AND PROPERTIES OF ULTRASONIC VIBRATION-ASSISTED LASER CLADDING OF AlCoCrFeNi HIGH-ENTROPY ALLOY COATINGS

Effect of Partitioning Time on the Microstructure and Evolution of Medium Mn Q&P Steel

Effect and mechanism of shuttle-heterostructure interfacial microalloying on mechanical properties of Cu/Ti composite plates prepared by accumulative roll bonding process

Effect of B4C content on microstructure and properties of AlCoCrFeNi coatings by laser cladding

中锰Q&P钢微观组织演变和力学性能分析

Effect of Partition Temperature on Microstructure and Mechanical Properties of Cold‐Rolled Medium‐Manganese Steel

Effect of Ti and WC on the Microstructure and Mechanical Properties of Laser Cladding AlCoCrFeNi High-Entropy Alloys

Influence of Ti element on the microstructure and crack of modulated WC-strengthened Ni-based alloy coatings by laser cladding

Effect of dislocation density on microstructure and mechanical properties of cold-rolled medium Mn steel

EFFECT OF TiC ADDITION ON MICROSTRUCTURE AND PROPERTIES OF LASER CLADDING AlCoCrFeNi2.1 COATINGS ON H13 STEEL

Effect of annealing time on microstructure and mechanical properties of Fe–C–Mn–Al–Si steel

高强韧中锰钢研究现状及发展趋势

Effect of TiC addition on the microstructure and properties of laser cladding Ni60A coatings on H13 steel surface

The Effect of Strain Rate on the Microstructure and Mechanical Properties of Q&P 980 Steel

Effect of CeO2 on the microstructure and properties of AlCoCrFeNi2.1 laser cladding coatings

Microstructure performance and Nano-Effect of laser alloying composites with Multi-Phase on TA1 titanium alloy

Effects of different annealing time on microstructure and mechanical properties of lightweight Al-containing medium-Mn steel

Effect of partitioning temperature on the microstructure and evolution of medium manganese steel

Microstructure and mechanical properties of medium manganese steel in intercritical annealing

Phase evolution and properties of AlxCoCrFeNi high-entropy alloys coatings by laser cladding

WEAR RESISTANCE AND MICROSTRUCTURE OF THE CeO2-MODIFIED STELLITE6 BASE TUNGSTEN INERT GAS CLAD COMPOSITE COATINGS ON THE Ti–6Al–4V ALLOY

基于Deform-3D的风机主轴空心轴预制坯成形优化

热处理工艺对硅锰钢组织和力学性能的影响

应变速率对热冲压淬火-配分钢显微组织与力学性能的影响

Microstructures and corrosion resistance enhancement of ultrasonic vibration-assisted medium entropy alloy base laser multi-phase coating

Influence of Partitioning Temperature on Microstructure and Mechanical Performance of Medium Manganese Fe-C-Mn-Cu-Cr-Mo-Nb Steel

Effect of a new pretreatment-Q&P process on the microstructure and mechanical properties of light-weight Al-containing medium-Mn steels

Effect of Cyclic Quenching on the Austenite Stability and Work Hardening Behavior of Medium-Mn Quenching and Partitioning Steel Enabled by Intercritical Annealing

Effect of a New Prestrain, Intercritical Annealing, Quenching, and Partitioning Process on the Microstructure and Mechanical Properties of Medium‐Manganese Steels

Microstructure evolution and properties of laser cladding Nb containing eutectic high entropy alloys

INFLUENCE OF TiC CONTENT ON MICROSTRUCTURE AND PROPERTIES OF AlCoCrFeNi HIGH-ENTROPY ALLOY COATINGS PREPARED BY LASER CLADDING

Effect of retained austenite on the microstructure and mechanical properties of cold-rolled medium-manganese Q&P steel

Effect of different matrix structure in medium-Mn quenching and partitioning steel on austenite stability and work hardening behavior

Deformation Behavior and Microstructure Evolution during Equal Channel Angular Pressing of Pure Aluminum

Microstructure and Excellent Performance Enhancement of Mea Base Composites with Multi-Phase Induced by Ultrasonic Assisted Laser Technology

等通道弯角挤压过程有限元分析与挤压模具优化设计

汽车后备箱底板覆盖件成型的有限元分析

模具几何形状对镁合金ECAP变形均匀性的影响

AZ31镁合金剧烈塑性变形过程分析与力学性能研究

纯铝圆形挤压件等通道弯角挤压微观组织与力学性能

大型环锻件轧制研究现状与展望

大型环件径轴向轧制成形仿真及试验研究

Microstructure evolution of a multi-track AlCoCrFeNi high entropy alloy coating fabricated by laser cladding

ENHANCING HIGH-TEMPERATURE OXIDATION RESISTANCE OF TITANIUM ALLOY WITH KF110-B4C-Ag THROUGH LASER TECHNOLOGY

Microstructure performance enhancement of Si 3 N 4 reinforced laser clad KF110 base composite coatings

Investigation of the Wear Behavior of Surface Welding AZ91 and AZ91+Gd Alloys under Variable Loading Conditions

EFFECT OF C-Mn PARTITIONING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TRIP STEEL

Effect of hot stamping and quenching & partitioning process on microstructure and mechanical properties of ultra-high strength steel

Laser nano-technology of light materials: Precision and opportunity

Study on dislocation and microstructural properties of friction stir welded joint for 2024-T4 aluminum alloys

应变速率对汽车用高强钢组织和性能的影响

Surface reinforcements of TA15 titanium alloy with laser induced Co base multiphase composites

LASER SURFACE REINFORCEMENT OF THE Ti/Al TIG WELDED JOINT

Effect of Different Isothermal Time on Microstructure and Mechanical Property of the Low-Carbon Steel Treated by Dual-Stable C-Mn Partitioning Process

Improving mechanical properties of ZK60 magnesium alloy by cryogenic treatment before hot extrusion

焊接电流对不等厚异质高强钢点焊接头组织性能的影响

剧烈塑性变形对AZ31镁合金微观组织演化的影响

高强度淬火-配分钢的研究现状及发展方向

焊接速度对DP590双相钢板激光焊接接头组织和性能的影响

热成形钢烘烤硬化性能研究

两相区保温及Q&P工艺对改善钢组织性能的分析

热成形技术在汽车轻量化中的应用与发展