崔晓斌｜河南理工大学｜学者主页

2026

Crab-inspired hybrid multi-bionic microstructure with durable spontaneous transport behavior for efficiently enhancing tribological and cutting performance in green lubrication

Xinhai Liu, Xiaobin Cui, Jingxia Guo, Junjin Ma, Bin Li, Pingmei Ming

Tribology International

DOI

2025

基于当量磨削层厚度的整体刀具容屑槽磨削功率模型

任磊，潘江涛，向道辉，马俊金，崔晓斌

《金刚石与磨料磨具工程》

2025

Exploration of superoleophobic multi-bionic microstructures on cemented carbide surface for high-efficiency reduction of workpiece removal energy in turning

Jingxia Guo, Xiaobin Cui, Chuangyang Wang, Dong Wang, Pingmei Ming

Journal of Cleaner Production

DOI

2025

Novel double-layer bionic microstructure regulated by laser energy distribution for efficient improvement of Al2O3/TiC ceramic tool performance in interrupted turning

Yafei Wang, Xiaobin Cui, Jingxia Guo, Ying Niu, Daohui Xiang, Pingmei Ming

International Journal of Refractory Metals and Hard Materials

DOI

2025

Lantern-inspired integrated multi-biomimetic microstructure for efficiently improving tribological performance of cemented carbide under green lubrication

Yunpeng Ma, Xiaobin Cui, Ying Niu, Daohui Xiang, Feng Jiao, Pingmei Ming

Wear

DOI

2025

Wheel position determination for eccentric relief grinding of cylindrical end mills avoiding undercut and interference

Lei Ren, Zheng Zhang, Jiaxiang Han, Chong Lv, Junjin Ma, Xiaobin Cui

The International Journal of Advanced Manufacturing Technology

DOI

2025

Exploration and comparison of superoleophobic and superlipophilic multi-biomimetic microstructures for efficiently decreasing specific cutting energy in green turning

Chuangyang Wang, Xiaobin Cui, Jingxia Guo, Lei Ren, Daohui Xiang, Pingmei Ming

Journal of Manufacturing Processes

DOI

2025

Wear modelling and experimental research on diamond coated tool ultrasonic longitudinal-torsional vibration grinding and polishing of SiCp/Al composites

Cheng Zhong, Daohui Xiang, Jun Zhang, Chaosheng Song, Yanqin Li, Guofu Gao, Jinglin Tong, Xiaobin Cui, Bo Zhao

Wear

DOI

2025

Multi-dimensional ultrasonic assisted microscale scratching of Fe-Cr alloys

Chaosheng Song, Daohui Xiang, Yanqin Li, Zhiqiang Zhang, Shuaikun Yang, Guofu Gao, Xiaobin Cui

International Journal of Mechanical Sciences

DOI

2025

Two-dimensional ultrasonic-assisted variable cutting depth scratch force model considering tool wear and experimental verification

Chaosheng Song, Daohui Xiang, Zhaojie Yuan, Zhiqiang Zhang, Shuaikun Yang, Guofu Gao, Jinglin Tong, Xiaobo Wang, Xiaobin Cui

Tribology International

DOI

2025

Molecular Dynamics Simulation Study on the Evolution Law of Subsurface Microdamage Extension on Silicon Wafers Under Different Abrasive Inclination Angles

Nan-Xing Wu, Liangyu Zhu, Xiaobin Cui, Dongling Yu, Hu Chen, Jie Wang

Physica Status Solidi (a)

DOI

2024

空化超声滚压对7075铝合金表面质量的影响

郑建新，邓瀚林，郭永磊，商映举，贾留银，崔晓斌

《河南理工大学学报(自然科学版)》

2024

Ultrasonic longitudinal-torsional vibration helical milling internal thread of SiCp/Al composites: Finite element simulation and machining quality research

Daohui Xiang, Bo Su, Dazhong Wang, Peicheng Peng, Zhaojie Yuan, Chaosheng Song, Bo Li, Xiaobin Cui, Guofu Gao, Bo Ya Zhao

Journal of Manufacturing Processes

DOI

2024

Improving wear resistance and machining performance of diamond tools in ferrous metals cutting: A review

Chaosheng Song, Daohui Xiang, Bo Ya Zhao, Qinglong An, Xuekun Li, Dazhong Wang, Feng Jiao, Guofu Gao, Xiaobin Cui

Journal of Materials Processing Technology

DOI

2024

Wheel path planning for flute grinding of non-cylindrical solid end-mills based on circular arc projection

Lei Ren, Zheng Zhang, Yong Li, Daohui Xiang, Junjin Ma, Xiaobin Cui

Journal of Manufacturing Processes

DOI

2024

Dynamic milling force model considering vibration and tool flank wear width for monitoring tool states in machining of Ti-6AI-4V

Junjin Ma, Yujie Zhang, Jiao Feng, Xiaobin Cui, Dinghua Zhang, Lei Ren, Bo Zhao, Xiaoyan Pang

Journal of Manufacturing Processes

DOI

2024

Initial Surface Residual Stress Field of Aluminum Alloy Prediction Method Based on Surface-Measured Stresses

Fangpeng Su, Youyi Zheng, Junjin Ma, Faping Zhang, Xiaobin Cui, Lei Ren, Xu Chen

Journal of Materials Engineering and Performance

DOI

2024

Lubricant-transport behavior and mechanical performance of assembled multi-biomimetic structure designed for green interrupted turning

Xiaobin Cui, Yunxiu Jiao, Dong Wang, Lei Ren, Daohui Xiang, Pingmei Ming

Journal of Materials Research and Technology

DOI

2024

Preparation of HFCVD spherical diamond films and the effect of crystal orientations on adhesion and tribological properties

Daohui Xiang, Yanwen Zhang, Zebin Su, Zhiqiang Zhang, Zhaojie Yuan, Chaosheng Song, Guofu Gao, Xiaobin Cui, Lei Ren

International Journal of Refractory Metals and Hard Materials

DOI

2024

Reconciliation and performance of dual-bionic microstructure on tool surface

Xiaobin Cui, Yunxiu Jiao, Jingxia Guo, Daohui Xiang, Feng Jiao, Pingmei Ming

International Journal of Mechanical Sciences

DOI

2024

Multidimensional ultrasonic vibration machining modeling of SiCp/Al cutting forces with different volume fractions: Experiments and numerical simulations

Daohui Xiang, Zhong Cheng, Zhaojie Yuan, Yanqin Li, Peicheng Peng, Chaosheng Song, Zhiqiang Zhang, Guofu Gao, Xiaobin Cui, Jinglin Tong

Composites Communications

DOI

2024

Friction characterization of SiCp/Al composites by 3D ultrasonic vibration-assisted milling

Daohui Xiang, Jinglong Sang, Peicheng Peng, Zhaojie Yuan, Chaosheng Song, Gaofeng Liu, Xiaobin Cui, Guofu Gao, Bo Zhao

Mechanical Systems and Signal Processing

DOI

2024

Estimation of tool temperature during laser-ultrasonic elliptical vibration turning high volume fraction SiCp/Al composites

Peicheng Peng, Daohui Xiang, Zhaojie Yuan, Zhiqiang Zhang, Chaosheng Song, Guofu Gao, Xiaobin Cui, Bo Zhao

International Journal of Thermal Sciences

DOI

2024

The Effects of Polycrystalline 3C-SiC with Different Roughness Coefficients on the Crystal Structure of Nano-grin ding Based on Molecular Dynamics

Zhijuan Deng, Jian Liu, Xiaobin Cui, Dongliang Liu, Weiwen Hu, Nan-Xing Wu

Materials Today Communications

DOI

2023

Residual stress formation mechanism considering cutting energy in milling of 7075 aluminum alloy

Youyi Zheng, Yuzhao Tian, Junjin Ma, Faping Zhang, Xiaobin Cui, Lei Ren

The International Journal of Advanced Manufacturing Technology

DOI

2023

Grafting–inspired bionic hierarchical structure for efficiently enhancing cemented carbide tool performance in green turning

Jiajun Ji, Xiaobin Cui, Junjin Ma, Hongliang Zhou, Daohui Xiang, Pingmei Ming

Journal of Materials Processing Technology

DOI

2023

Effects of dual biomimetic tool surface microstructure on specific cutting energy in green turning

Xiaobin Cui, Tianbin He, Jingxia Guo, Daohui Xiang, Feng Jiao, Pingmei Ming

Journal of Manufacturing Processes

DOI

2023

Top burr thickness prediction model in milling of thin-walled workpiece considering tool and workpiece deformation

Junjin Ma, Baodong Wang, Bo Zhao, Dinghua Zhang, Xiaobin Cui, Xiaoyan Pang

The International Journal of Advanced Manufacturing Technology

DOI

2023

Performance and reliability of Al2O3/TiC ceramic tool with multi-bionic surface microstructure in intermittent dry turning of AISI 52100 hardened steel

Xiaobin Cui, Jiajun Ji, Jingxia Guo, Daohui Xiang, Feng Jiao, Pingmei Ming

Journal of Materials Research and Technology

DOI

2023

Stone rubbing–inspired biomimetic multi–scale surface with highly robust superhydrophobicity

Xiaobin Cui, Shengquan Duan, Jingxia Guo, Junjin Ma, Pingmei Ming

Surfaces and Interfaces

DOI

2023

Performance of multi-bionic hierarchical texture in green intermittent cutting

Xiaobin Cui, Ningning Sun, Jingxia Guo, Junjin Ma, Pingmei Ming

International Journal of Mechanical Sciences

DOI

2022

Green multi-biomimetic spontaneous oil-transport microstructure and its effects on energy consumption in sustainable intermittent cutting

Xiaobin Cui, Ningning Sun, Jingxia Guo, Junjin Ma, Pingmei Ming

Journal of Cleaner Production

DOI

2022

Bionic multifunctional surface microstructure for efficient improvement of tool performance in green interrupted hard cutting

Xiaobin Cui, Shengquan Duan, Jingxia Guo, Pingmei Ming

Journal of Materials Processing Technology

DOI

2022

Preparation and application of sustainable nanofluid lubricant from waste soybean oil and waste serpentine for green intermittent machining process

Xiaobin Cui, Ningning Sun, Pengcheng Cao, Jingxia Guo, Pingmei Ming

Journal of Manufacturing Processes

DOI

2022

Fabrication, transport behaviors and green interrupted cutting performance of bio-inspired microstructure on Al2O3/TiC composite ceramic surface

Xiaobin Cui, Yonghui Li, Jingxia Guo, Qiang Guo

Journal of Manufacturing Processes

DOI

2021

Determination of wheel position in flute grinding of cylindrical end-mills considering tolerances of flute parameters

Lei Ren, Jing Xu, Xinmin Zhang, Xiaobin Cui, Junjin Ma

Journal of Manufacturing Processes

DOI

2021

Effects of bio-inspired integration of laser-induced microstructure and coated cemented carbide on tool performance in green intermittent turning

Xiaobin Cui, Yonghui Li, Jingxia Guo, Pingmei Ming

Journal of Manufacturing Processes

DOI

2021

Use and performance of soybean oil based bio-lubricant in reducing specific cutting energy during biomimetic machining

Xiaobin Cui, Pengcheng Cao, Jingxia Guo, Pingmei Ming

Journal of Manufacturing Processes

DOI

2021

Analysis of a sustainable MQL machining process combining modified waste cooking oil and multifunctional biomimetic microstructure

Xiaobin Cui, Yonghui Li, Jingxia Guo, Pingmei Ming

Sustainable materials and technologies

DOI

2020

Biomimetic integration of MQL and tool surface microstructure in intermittent machining

Yuhang Guo, Xiaobin Cui, Jingxia Guo

The International Journal of Advanced Manufacturing Technology

DOI

2020

Bio-inspired design of cleaner interrupted turning and its effects on specific cutting energy and harmful gas emission

Xiaobin Cui, Yuhang Guo, Jingxia Guo, Pingmei Ming

Journal of Cleaner Production

DOI

2020

Performance analysis of laser-induced biomimetic ceramic tools in interrupted cutting

Xiaobin Cui, Yuhang Guo, Jingxia Guo, Pingmei Ming

International Journal of Mechanical Sciences

DOI

2019

仿生微坑—槽复合织构陶瓷刀具硬车削性能研究

郭志远，崔晓斌，燕凯

《工具技术》

2019

Interrupted hard turning performance of ceramic cutting tools possessing microscopic geometries established with the two-dimensional fluid-like characteristics of the chip considered

Xiaobin Cui, Jingxia Guo

The International Journal of Advanced Manufacturing Technology

DOI

2019

Biomimetic fabrication, mechanical behavior and interrupted turning performance of the microscopic surface structures of Al2O3/TiC micro-nano-composite ceramic

Xiaobin Cui, Jingxia Guo

Journal of Alloys and Compounds

DOI

2019

Biomimetic micro-textures, mechanical behaviors and intermittent turning performance of textured Al2O3/TiC micro-composite and micro-nano-composite ceramics

Xiaobin Cui, Kai Yan, Jingxia Guo, Dong Wang

Ceramics International

DOI

2019

Effects of bioinspired microscopic geometry of ceramic tool surface on tool temperatures in continuous and interrupted turning

Xiaobin Cui, Jingxia Guo

International Journal of Mechanical Sciences

DOI

2019

Bio-inspired fabrication, mechanical characterization and cutting performance evaluation of Al2O3/TiC micro-nano-composite ceramic with varying microscopic surfaces

Xiaobin Cui, Kai Yan, Jingxia Guo

Ceramics International

DOI

2018

Identification of the optimum cutting parameters in intermittent hard turning with specific cutting energy, damage equivalent stress, and surface roughness considered

Xiaobin Cui, Jingxia Guo

The International Journal of Advanced Manufacturing Technology

DOI

2018

Optimization of cutting conditions in hard milling with the performance of cemented carbide tool material considered

Xiaobin Cui, Xingshuai Zheng, Jingxia Guo

The International Journal of Advanced Manufacturing Technology

DOI

2018

Intermittent turning performance of ceramic tools with surface micro-geometry designed considering fluid-like behavior of chip

Xiaobin Cui, Zhiyuan Guo, Jingxia Guo

Ceramics International

DOI

2018

Effects of material microstructure and surface microscopic geometry on the performance of ceramic cutting tools in intermittent turning

Xiaobin Cui, Dong Wang, Jingxia Guo

Ceramics International

DOI

2017

A review of high-speed intermittent cutting of hardened steel

Xiaobin Cui, Feng Jiao, Bo Zhao, Jingxia Guo

The International Journal of Advanced Manufacturing Technology

DOI

2017

Reliability analysis of ceramic cutting tools in continuous and interrupted hard turning

Xiaobin Cui, Feng Jiao, Pingmei Ming, Jingxia Guo

Ceramics International

DOI

2016

超高速面铣淬硬钢涂层刀具切削性能研究

郭景霞，崔晓斌，闫艳燕

《兵器材料科学与工程》

2016

Formation characteristics of the chip and damage equivalent stress of the cutting tool in high-speed intermittent cutting

Xiaobin Cui, Bo Zhao, Feng Jiao, Pingmei Ming

The International Journal of Advanced Manufacturing Technology

DOI

2016

Effects of cutting parameters on tool temperatures in intermittent turning with the formation of serrated chip considered

Xiaobin Cui, Jingxia Guo

Applied Thermal Engineering

DOI

2016

Performance optimization for cemented carbide tool in high-speed milling of hardened steel with initial microstructure considered

Xiaobin Cui, Dong Wang, Jingxia Guo

International Journal of Mechanical Sciences

DOI

2016

Influences of tool rake angle and cutting speed on ceramic tool failure in continuous and intermittent turning of hardened steel

Xiaobin Cui, Dong Wang, Jingxia Guo

Ceramics International

DOI

2015

Optimization of geometry parameters for ceramic cutting tools in intermittent turning of hardened steel

Xiaobin Cui, Jingxia Guo, Jianxin Zheng

Materials & Design

DOI

2015

Chip formation and its effects on cutting force, tool temperature, tool stress, and cutting edge wear in high- and ultra-high-speed milling

Xiaobin Cui, Bo Zhao, Feng Jiao, Jianxin Zheng

The International Journal of Advanced Manufacturing Technology

DOI

2015

Analysis of PCBN tool failure mechanisms in face milling of hardened steel using damage equivalent stress

Xiaobin Cui, Jingxia Guo, Jun Zhao, Yanyan Yan

The International Journal of Advanced Manufacturing Technology

DOI

2014

Chip temperature and its effects on chip morphology, cutting forces, and surface roughness in high-speed face milling of hardened steel

Xiaobin Cui, Jingxia Guo, Jun Zhao, Yanyan Yan

The International Journal of Advanced Manufacturing Technology

DOI

2014

Cutting performance of coated carbide tools in high-speed face milling of AISI H13 hardened steel

Xiaobin Cui, Jun Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2014

Effects of cutting parameters on chip morphology and tool wear in high-speed face milling of hardened steel

Xiaobin Cui, Jun Zhao

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2013

高速断续切削淬硬钢刀具失效机理研究

崔晓斌

《山东大学》

2013

基于微观结构的WC-Co硬质合金硬度预报模型

王东，赵军，李安海，崔晓斌

《材料工程》

2011

高速铣削钛合金Ti6A4V铣削力试验研究

罗汉兵，赵军，李安海，崔晓斌

《组合机床与自动化加工技术》

2011

超高速切削Inconel 718刀具寿命研究及切削参数优化

赵军，郑光明，李安海，崔晓斌

《哈尔滨理工大学学报》

2011

陶瓷刀具断续车削淬硬钢失效演变机理研究

崔晓斌，赵军，周咏辉，郑光明

《机床与液压》

2010

高速侧铣镍基合金Inconel 718切削力试验研究

李安海，赵军，王泽明，崔晓斌

《组合机床与自动化加工技术》

2010

陶瓷刀具切削镍基合金的三维数值模拟

郑光明，赵军，宋新玉，崔晓斌

《组合机床与自动化加工技术》

2010

陶瓷刀具断续车削淬硬钢切削力和切削温度的有限元分析

崔晓斌，赵军，郑光明，郭胜光

《组合机床与自动化加工技术》

精选作品

期刊论文

Crab-inspired hybrid multi-bionic microstructure with durable spontaneous transport behavior for efficiently enhancing tribological and cutting performance in green lubrication

基于当量磨削层厚度的整体刀具容屑槽磨削功率模型

Exploration of superoleophobic multi-bionic microstructures on cemented carbide surface for high-efficiency reduction of workpiece removal energy in turning

Novel double-layer bionic microstructure regulated by laser energy distribution for efficient improvement of Al2O3/TiC ceramic tool performance in interrupted turning

Lantern-inspired integrated multi-biomimetic microstructure for efficiently improving tribological performance of cemented carbide under green lubrication

Wheel position determination for eccentric relief grinding of cylindrical end mills avoiding undercut and interference

Exploration and comparison of superoleophobic and superlipophilic multi-biomimetic microstructures for efficiently decreasing specific cutting energy in green turning

Wear modelling and experimental research on diamond coated tool ultrasonic longitudinal-torsional vibration grinding and polishing of SiCp/Al composites

Multi-dimensional ultrasonic assisted microscale scratching of Fe-Cr alloys

Two-dimensional ultrasonic-assisted variable cutting depth scratch force model considering tool wear and experimental verification

Molecular Dynamics Simulation Study on the Evolution Law of Subsurface Microdamage Extension on Silicon Wafers Under Different Abrasive Inclination Angles

空化超声滚压对7075铝合金表面质量的影响

Ultrasonic longitudinal-torsional vibration helical milling internal thread of SiCp/Al composites: Finite element simulation and machining quality research

Improving wear resistance and machining performance of diamond tools in ferrous metals cutting: A review

Wheel path planning for flute grinding of non-cylindrical solid end-mills based on circular arc projection

Dynamic milling force model considering vibration and tool flank wear width for monitoring tool states in machining of Ti-6AI-4V

Initial Surface Residual Stress Field of Aluminum Alloy Prediction Method Based on Surface-Measured Stresses

Lubricant-transport behavior and mechanical performance of assembled multi-biomimetic structure designed for green interrupted turning

Preparation of HFCVD spherical diamond films and the effect of crystal orientations on adhesion and tribological properties

Reconciliation and performance of dual-bionic microstructure on tool surface

Multidimensional ultrasonic vibration machining modeling of SiCp/Al cutting forces with different volume fractions: Experiments and numerical simulations

Friction characterization of SiCp/Al composites by 3D ultrasonic vibration-assisted milling

Estimation of tool temperature during laser-ultrasonic elliptical vibration turning high volume fraction SiCp/Al composites

The Effects of Polycrystalline 3C-SiC with Different Roughness Coefficients on the Crystal Structure of Nano-grin ding Based on Molecular Dynamics

Residual stress formation mechanism considering cutting energy in milling of 7075 aluminum alloy

Grafting–inspired bionic hierarchical structure for efficiently enhancing cemented carbide tool performance in green turning

Effects of dual biomimetic tool surface microstructure on specific cutting energy in green turning

Top burr thickness prediction model in milling of thin-walled workpiece considering tool and workpiece deformation

Performance and reliability of Al2O3/TiC ceramic tool with multi-bionic surface microstructure in intermittent dry turning of AISI 52100 hardened steel

Stone rubbing–inspired biomimetic multi–scale surface with highly robust superhydrophobicity

Performance of multi-bionic hierarchical texture in green intermittent cutting

Green multi-biomimetic spontaneous oil-transport microstructure and its effects on energy consumption in sustainable intermittent cutting

Bionic multifunctional surface microstructure for efficient improvement of tool performance in green interrupted hard cutting

Preparation and application of sustainable nanofluid lubricant from waste soybean oil and waste serpentine for green intermittent machining process

Fabrication, transport behaviors and green interrupted cutting performance of bio-inspired microstructure on Al2O3/TiC composite ceramic surface

Determination of wheel position in flute grinding of cylindrical end-mills considering tolerances of flute parameters

Effects of bio-inspired integration of laser-induced microstructure and coated cemented carbide on tool performance in green intermittent turning

Use and performance of soybean oil based bio-lubricant in reducing specific cutting energy during biomimetic machining

Analysis of a sustainable MQL machining process combining modified waste cooking oil and multifunctional biomimetic microstructure

Biomimetic integration of MQL and tool surface microstructure in intermittent machining

Bio-inspired design of cleaner interrupted turning and its effects on specific cutting energy and harmful gas emission

Performance analysis of laser-induced biomimetic ceramic tools in interrupted cutting

仿生微坑—槽复合织构陶瓷刀具硬车削性能研究

Interrupted hard turning performance of ceramic cutting tools possessing microscopic geometries established with the two-dimensional fluid-like characteristics of the chip considered

Biomimetic fabrication, mechanical behavior and interrupted turning performance of the microscopic surface structures of Al2O3/TiC micro-nano-composite ceramic

Biomimetic micro-textures, mechanical behaviors and intermittent turning performance of textured Al2O3/TiC micro-composite and micro-nano-composite ceramics

Effects of bioinspired microscopic geometry of ceramic tool surface on tool temperatures in continuous and interrupted turning

Bio-inspired fabrication, mechanical characterization and cutting performance evaluation of Al2O3/TiC micro-nano-composite ceramic with varying microscopic surfaces

Identification of the optimum cutting parameters in intermittent hard turning with specific cutting energy, damage equivalent stress, and surface roughness considered

Optimization of cutting conditions in hard milling with the performance of cemented carbide tool material considered

Intermittent turning performance of ceramic tools with surface micro-geometry designed considering fluid-like behavior of chip

Effects of material microstructure and surface microscopic geometry on the performance of ceramic cutting tools in intermittent turning

A review of high-speed intermittent cutting of hardened steel

Reliability analysis of ceramic cutting tools in continuous and interrupted hard turning

超高速面铣淬硬钢涂层刀具切削性能研究

Formation characteristics of the chip and damage equivalent stress of the cutting tool in high-speed intermittent cutting

Effects of cutting parameters on tool temperatures in intermittent turning with the formation of serrated chip considered

Performance optimization for cemented carbide tool in high-speed milling of hardened steel with initial microstructure considered

Influences of tool rake angle and cutting speed on ceramic tool failure in continuous and intermittent turning of hardened steel

Optimization of geometry parameters for ceramic cutting tools in intermittent turning of hardened steel

Chip formation and its effects on cutting force, tool temperature, tool stress, and cutting edge wear in high- and ultra-high-speed milling

Analysis of PCBN tool failure mechanisms in face milling of hardened steel using damage equivalent stress

Chip temperature and its effects on chip morphology, cutting forces, and surface roughness in high-speed face milling of hardened steel

Cutting performance of coated carbide tools in high-speed face milling of AISI H13 hardened steel

Effects of cutting parameters on chip morphology and tool wear in high-speed face milling of hardened steel

高速断续切削淬硬钢刀具失效机理研究

基于微观结构的WC-Co硬质合金硬度预报模型

高速铣削钛合金Ti6A4V铣削力试验研究

超高速切削Inconel 718刀具寿命研究及切削参数优化

陶瓷刀具断续车削淬硬钢失效演变机理研究

高速侧铣镍基合金Inconel 718切削力试验研究

陶瓷刀具切削镍基合金的三维数值模拟

陶瓷刀具断续车削淬硬钢切削力和切削温度的有限元分析

研究方向