邱丰｜吉林大学｜学者主页

2026

Microstructural manipulation and wear resistance optimization of gray cast iron via nano-sized TiC–TiB2 ceramic particles

Qianwei Chen, Liyuan Song, Yaowu Hu, Qiangsheng Wang, Linghao Meng, Bingxu Wang, Anwei Ying, Yuxiang Hu, Haokai Fan, Feng Qiu

Journal of Materials Research and Technology

DOI

2026

Trace nanoparticle-mediated modification of the Fe-rich phases and enhancement of mechanical properties in Al-Mg-Si-0.6Fe alloy

Yi-Cheng Gao, Zhongyi Cai, Hong-Yu Yang, Bai–Xin Dong, Shi–Li Shu, Liang-Yu Chen, Jia Meng, Cheng-Gang Wang, Pei-Jun Cong, Zhang Hong-jun, Jian Qiao, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2026

Laser additive manufacturing of particle reinforced aluminum alloys

Meng-Fan Xu, Tianshu Liu, Bonnie Attard, Hong‐Yu Yang, Feng Qiu, Yu Long, Qi‐Chuan Jiang, Chaolin Tan

Journal of Materials Processing Technology

DOI

2026

Enhanced short-term creep resistance of hot-work die steel via nanoparticle-assisted through-process microstructural regulation

Chuan-De Li, Bai–Xin Dong, Pei-Dong Chen, Feng Qiu, Shi–Li Shu, Fang Chang, Hong‐Yu Yang, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2026

Development of nanoparticle-reinforced highly alloyed Al–Zn–Mg–Cu alloy with ultrahigh strength

Shuang-Shuang Li, Hong‐Yu Yang, Swee Leong Sing, Bai–Xin Dong, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2026

Research Progress on Microstructure Control and Strengthening Mechanisms of Aluminum Alloys for New Energy Vehicles

Jia-Shuai Chu, Hong‐Yu Yang, Bai–Xin Dong, Tianshu Liu, Shi–Li Shu, Jia Meng, Cheng-Gang Wang, Pei-Jun Cong, Zhang Hong-jun, Jian Qiao, Feng Qiu, Qi‐Chuan Jiang

Materials

DOI

2026

Sustaining excellent strength and toughness in high-Cr die steel via trace nano-ceramic particle modification under cyclic thermal exposure

Chuan-De Li, Hong‐Yu Yang, Bai–Xin Dong, Shi–Li Shu, Fang Chang, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2026

Microstructure tailoring with minor nanoparticle addition for superior fatigue resistance in aluminum alloys

Tianshu Liu, Hong-Yu Yang, Chaolin Tan, Bai–Xin Dong, Shi–Li Shu, Qi–Chuan Jiang, Feng Qiu, Laichang Zhang

Materials Science and Engineering A

DOI

2026

A review of corrosion mechanisms, passive film dynamics, and material design strategies for stainless steels in seawater environments

Hong-Yuan Chen, Jingyu Liu, Hong-Yu Yang, Bai-Xin Dong, Bin-Bin Wang, Lin Liu, Fang Chang, Shi-Li Shu, De‐Li Chen, Feng Qiu, Fang-Jie Shi, Lei Shen, Shuo Wang, Qi-Chuan Jiang

Journal of Materials Research and Technology

DOI

2026

Advances in particle-reinforced high-entropy alloys: Preparation, particle characterization, properties, and prospects

Yu-Zhuo Bai, Bai–Xin Dong, Hong‐Yu Yang, Feng Qiu, Shi–Li Shu, Qi‐Chuan Jiang, Liang‐Yu Chen, Lai‐Chang Zhang

Journal of Materials Research and Technology

DOI

2026

Research progress on process, microstructure and property regulation of additive manufacturing tool steels

Wen-Biao Zhan, Pei-Dong Chen, Feng Qiu, Hong-Yu Yang, Bai–Xin Dong, Bin-Bin Wang, Lin Liu, Fang Chang, Shi–Li Shu, De‐Li Chen, Zheng-Wei Gu, Qi-Chuan Jiang

Journal of Materials Research and Technology

DOI

2026

Strengthening mechanisms of molybdenum in die steels at high temperature

Ze-Ju Bao, Jingran Sun, LI Jia-jun, Hong-Yu Yang, Bai–Xin Dong, Fang Chang, Shi–Li Shu, Feng Qiu, Lin Liu, Bin-Bin Wang, Jun Liu, Wen-Qing Zhu, Qi-Chuan Jiang

Journal of Materials Research and Technology

DOI

2026

Tailoring mechanical properties and corrosion resistance of (TiC–TiB2)/Al–Zn–Mg–Cu composites via high-pressure torsion

Aobo Zhou, Ying Chen, Chenchen Wu, Jiqiong Lian, Siyan Liang, Baixin Dong, Feng Qiu, Houan Zhang

Journal of Materials Research and Technology

DOI

2026

Grain refinement and stability in rare-earth magnesium alloys

Zheng Tian, Zhuang-zhuang LIU, Lei Zhan, Bai–Xin Dong, Dan Luo, Hongyu Yang, Lin Liu, Feng Qiu

Journal of Materials Research and Technology

DOI

2026

Nanoparticle-enabled superplasticity in extruded AZ91 magnesium alloy with elongation exceeding 600%

Bai–Xin Dong, Hong‐Yu Yang, Xin Zhang, Feng Qiu, Qi‐Chuan Jiang, Lai‐Chang Zhang

International Journal of Extreme Manufacturing

DOI

2026

Research progress on rare earth-containing heat-resistant magnesium alloys

Zhan-Bo Zhang, Hong-Yu Yang, Bai–Xin Dong, Shi–Li Shu, Jia Meng, Cheng-Gang Wang, Pei-Jun Cong, Zhang Hong-jun, Jian Qiao, Lin Liu, Hengbin Xu, Ya Nan Wang, Weihua Liu, Feng Qiu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2026

Influence mechanisms of TiC-TiB2 particles on solid-liquid and solid-solid phase transformations in ZL205A

shuyu xie, Zhongjie Cai, Lei Zhan, Shili Shu, Feng Qiu

Journal of Alloys and Compounds

DOI

2026

Study on microstructure and high-temperature mechanical behavior of nano-TiC/TiB2 duplex-reinforced nickel-based alloys

Yong Shao, Bin Shi, Shaoqi Zhang, Feng Qiu, Cheng Liu, Xiaocheng Lu, Pingyi Guo

Journal of Materials Science

DOI

2026

Microstructure and compression deformation behaviors of TiAl composites reinforced by in-Situ Nano-Ti2AlC and Mn3AlC

Bingheng Miao, Yunlei Gao, Yuan-Zheng Wei, Shili Shu, Hongyu Yang, Feng Qiu, Qichuan Jiang

Journal of Materials Research and Technology

DOI

2026

Superplastic magnesium alloys: A critical review of processing, deformation mechanisms, and particulate reinforcement strategies

Zi-Zhuo Kangwei, Hong-Yu Yang, Bai–Xin Dong, Wen-Zhan Shi, Xian-Jun Zhou, Heli Peng, Shi–Li Shu, Jian Qiao, Feng Qiu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2026

Hazards and optimal utilization of iron in low-carbon recycled aluminum alloys

Yicheng Gao, Baixin Dong, Hongyu Yang, Zhongyi Cai, Tianshu Liu, Xinmiao Zhong, Peijun Cong, 舒世立, Jia Meng, Jian Qiao, Ming Zhu, Jie Kang, Lin Liu, Feng Qiu, Qichuan Jiang, Laichang Zhang

International Journal of Minerals Metallurgy and Materials

DOI

2026

Research progress on the formation, regulation, and failure mechanisms of the γ′ phase in nickel-based superalloy

Jun-Bo Chen, Hong-Yu Yang, Bai–Xin Dong, Xinmiao Zhong, Bin-Bin Wang, Lin Liu, Shi–Li Shu, De‐Li Chen, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2026

Research progress on strengthening mechanisms and application of high-performance cold-work tool and die steels

Wenbiao Zhang, Zhengwei Gu, Hong-Yu Yang, Bai–Xin Dong, Fang Chang, Bin-Bin Wang, Huixia Xu, Shuaishuai Wang, Lin Liu, Shi–Li Shu, Deli Chen, Hai-Feng Luo, Xiao-Yu Ni, Jun Liu, Feng Qiu, Qi-Chuan Jiang

Journal of Materials Research and Technology

DOI

2026

Synergistic enhancement of strength and ductility of Ti2AlC/TiAl through Mn solid solution and interface manipulation

Yuan-Zheng Wei, Yilu Li, Shi–Li Shu, Hongyu Yang, Feng Qiu, Jiang Qichuan

International Journal of Minerals Metallurgy and Materials

DOI

2026

Microstructure and high-temperature creep behavior of nano-strengthened superalloys

Xin Zhao, Dan Zhang, Zhi-Yang Li, Hong‐Yu Yang, Xinmiao Zhong, Jun-Bo Chen, Bai–Xin Dong, Shi–Li Shu, Liang‐Yu Chen, Jian Qiao, Feng Qiu, Qi-Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

新时代科教融汇背景下材料科学基础课程教学改革探索

杨宏宇，邱丰，舒世立，常芳

《高教学刊》

DOI

2025

Review on additive manufacturing lightweight metal matrix composites: From properties to functionalities

Xian Wu, Zhiping Guan, Peng Chen, Tianshu Liu, Hong‐Yu Yang, Feng Qiu, Xinhua Wu, Chaolin Tan

Journal of Material Science and Technology

DOI

2025

Multiscale orchestration of microstructures in duplex stainless steel via introduction of trace nanoceramics

Jingran Sun, Bai–Xin Dong, Hong‐Yuan Chen, Feng-Yi Zuo, De‐Li Chen, Aimin Li, Hai-Feng Luo, Xiao-Yu Ni, Jun Liu, Lin Liu, Feng Qiu, Hong‐Yu Yang, Shi–Li Shu, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2025

The Microstructure Regulation Mechanism and Future Application of Aluminum Alloys Manipulated by Nanocrystalline Structures Formed by In Situ Amorphous Crystallization

Wenbo Yang, Le Zhan, Lin Liu, Fan-Xu Meng, Run Zhang, Kadiredan Tuerxun, Xing-Rui Zhao, Bai–Xin Dong, Shi–Li Shu, Tianshu Liu, Hong‐Yu Yang, Feng Qiu, Qi–Chuan Jiang

Materials

DOI

2025

Rare Earth Elements in Heat-Resistant Magnesium Alloys: Mechanisms, Performance, and Design Strategies

Tian Zheng, Chong Wang, Bai–Xin Dong, Hong‐Yu Yang, Le Zhan, Dan Luo, Feng Qiu, Qi–Chuan Jiang

Materials

DOI

2025

Achieving high oxidation and hot-cold alternating fatigue resistance die steels via synergistic manipulation of Cr and nanoparticles

Jingran Sun, Bai–Xin Dong, Hong‐Yu Yang, Fang-Chang, Xinmiao Zhong, Aimin Li, Cheng-Gang Wang, Zhigang Li, Jia Meng, Jian Qiao, Jie Kang, Ming Liang Zhu, Shi–Li Shu, Feng Qiu, Lin Liu

Materials Science and Engineering A

DOI

2025

The development of high thermal conductivity die steel with excellent performance: Integrating alloy design, heat treatment, and ceramic particle reinforcement

Binbin Wang, Dan Zhang, Hong‐Yu Yang, Bai–Xin Dong, Tian-Shu Liu, Jian Qiao, Pei-Jun Cong, Shi–Li Shu, De-Li Chen, Hai-Feng Luo, Xiao-Yu Ni, Jun Liu, Lin Liu, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

Enhanced high-temperature tensile performance and strengthening mechanism of Al-13Si alloys reinforced by trace micron/nano hybrid-sized TiB2

Hailin Meng, Dan Zhang, Fan-Xu Meng, Bai–Xin Dong, Hong‐Yu Yang, Jia Meng, Zhifa Wang, Shi–Li Shu, Feng Qiu, Qi–Chuan Jiang

Ceramics International

DOI

2025

Opening the future of lightweight: Research progress in additive manufacturing of TiAl alloys

Yuan-Zheng Wei, Bing-Heng Miao, Shi–Li Shu, Hong‐Yu Yang, Xinmiao Zhong, Bai–Xin Dong, Liang-Yu Chen, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

Enhancing high-temperature performance of Al Cu alloys via nanoceramic particle-induced grain boundary stabilization and precipitate manipulation

Xudong Ma, Dan Zhang, Bai–Xin Dong, Hong‐Yu Yang, Shi–Li Shu, Liang‐Yu Chen, Fan Zhang, Jie Kang, Jia Meng, Cheng-Gang Wang, Kuang Cao, Jian Qiao, Feng Qiu, Qi‐Chuan Jiang

Materials Characterization

DOI

2025

Thermal fatigue failure mechanisms and enhancement strategies of die steel

Chuan-De Li, Hong‐Yu Yang, Bai–Xin Dong, De-Li Chen, Shi–Li Shu, Feng Qiu, Qi‐Chuan Jiang, Lai‐Chang Zhang

Journal of Materials Research and Technology

DOI

2025

Additive manufacturing of high-strength and crack-sensitive aluminum alloy using novel in-situ ceramics reinforced powder

Tianshu Liu, Feng Qiu, Siwei Du, Hong‐Yu Yang, Peng Chen, Fern Lan Ng, Xin Wei Cheng, Youxiang Chew, Qi–Chuan Jiang, Chaolin Tan

Journal of Material Science and Technology

DOI

2025

Development and future of TiAl composites – microstructural characteristics and high-temperature service performance

Yuan-Zheng Wei, Bing-Heng Miao, Shi–Li Shu, Hong‐Yu Yang, Xinmiao Zhong, Bai–Xin Dong, Liang-Yu Chen, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

In depth analysis of microstructure and mechanical properties of joints in thick plate friction stir welding of high–strength Al–Zn–Mg–Cu alloy

Shuangshuang Li, Hong‐Yu Yang, Bai–Xin Dong, Shi–Li Shu, Tianshu Liu, Feng Qiu, Qi–Chuan Jiang

Materials Characterization

DOI

2025

Microstructure, mechanical properties and corrosion behavior of biodegradable high-purity magnesium via extrusion-shear process: effect of extrusion temperature

Fengjian Shi, Xin Jiang, Jiawei Guo, Tianxiang Chen, Xiao Dong Chen, Shilong Wang, Haocheng Quan, Jiheng Wang, Zhongfu Huang, Hong‐Yu Yang, Feng Qiu

Journal of Alloys and Compounds

DOI

2025

Mechanisms of Ti, Nb, and Zr in Microstructure Evolution and Mechanical Enhancement of CNTs/Al Composites

Si-Yu Zhang, Jian-Ming Xu, Bai–Xin Dong, Fengjian Shi, Shi–Li Shu, Hong‐Yu Yang, Feng Qiu

Journal of Materials Research and Technology

DOI

2025

The role of in-situ dual-phase NbB2 and NbC particles on the microstructure and toughening mechanisms of NiAl composites

Yue Ma, Yi-Lu Li, Hong‐Yu Yang, Yuan-Zheng Wei, Lin Liu, Feng Qiu, Qi‐Chuan Jiang

Ceramics International

DOI

2025

Recent advances on magnesium alloys for automotive cabin components: Materials, applications, and challenges

Lei Zhan, Chunhua Kong, Chunyuan Zhao, Xiuhong Cui, Lihua Zhang, Yang Song, Ying Lu, Lan Qing Xia, Kai Ma, Hong‐Yu Yang, Shi–Li Shu, Baixing Dong, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

The development of high-strength flame-retardant magnesium alloys

Xian-Wen Chen, Hong‐Yu Yang, Bai–Xin Dong, Tianshu Liu, Lin Liu, Tian Zheng, Lei Zhan, Cheng-Gang Wang, Zhigang Li, Jia Meng, Jian Qiao, Weidong Yang, Ming Zhi Zhu, Shi–Li Shu, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

Excellent high-temperature friction and wear resistance of high–Cr die steels by trace in–situ nano-ceramics

Ze-Ju Bao, Hong‐Yu Yang, Bai–Xin Dong, Xinmiao Zhong, Yi-Lu Li, Aimin Li, Cheng-Gang Wang, Zhigang Li, Jia Meng, Jian Qiao, Jie Kang, Ming Zhi Zhu, Shi–Li Shu, Huixia Xu, Feng Qiu, Qi–Chuan Jiang

Ceramics International

DOI

2025

Competitive and collaborative relationship between Al–3P and TiB2 nanoparticles in the microstructure manipulation of eutectic Al–Si alloys

Yi-Lu Li, Bai–Xin Dong, Hong‐Yu Yang, Dan Luo, Shi–Li Shu, Zhifa Wang, Jie Kang, Jia Meng, Chang-Jie Luo, Cheng-Gang Wang, Kuang Cao, Jian Qiao, Ming Zhi Zhu, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2025

Study on the microstructure and mechanical properties of selective laser melted TiB/Ti6Al4V composites incorporating trace amounts of TiB2 nanoparticles

Shuting Fu, Ying Han, Jiapeng Sun, Feng Qiu, Guoqing Zu, Weiwei Zhu, Xu Ran

Journal of Alloys and Compounds

DOI

2024

材料成型及控制工程专业实践教学改革探索——以“生产实习”课程为例

杨宏宇，邱丰，舒世立，常芳

《教育教学论坛》

2024

Tailored porosity in additive manufacturing of 7075 aluminum alloy for crack suppression and high strength

Tianshu Liu, Feng Qiu, Siwei Du, Jinlong Su, Hong‐Yu Yang, Peng Chen, Fern Lan Ng, Youxiang Chew, Qi‐Chuan Jiang, Chaolin Tan

Journal of Materials Processing Technology

DOI

2024

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Chang-Rong Song, Siyu Zhang, Lin Liu, Hong‐Yu Yang, Jie Kang, Jia Meng, Chang-Jie Luo, Cheng-Gang Wang, Kuang Cao, Jian Qiao, Shi–Li Shu, Ming Zhu, Feng Qiu, Qi–Chuan Jiang

Materials

DOI

2024

The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology

Hong-Yu Cui, Ze-Ju Bao, Qin Li Gong, Shi-Zhe Bao, Yun-Zhi Zou, Aimin Li, Hong‐Yu Yang, Cheng-Gang Wang, Zhigang Li, Fang Chang, Shi–Li Shu, Jie Kang, Ming Liang Zhu, Feng Qiu, Qi‐Chuan Jiang

Materials

DOI

2024

Effect of synergistic microalloying on the microstructural optimization of Mo/NiAl alloy with excellent mechanical properties under rapid non-equilibrium solidification

Xinmiao Zhong, Yi-Lu Li, Hong‐Yu Yang, Yong Shao, Jia Meng, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2024

Nano-Enhanced Phase Reinforced Magnesium Matrix Composites: A Review of the Matrix, Reinforcement, Interface Design, Properties and Potential Applications

Jiao-Yi Ren, Guan-Cheng Ji, Hao-Rui Guo, Yu-Meng Zhou, Xin Tan, Wen-Fang Zheng, Qian Xing, Jiayi Zhang, Jingran Sun, Hong‐Yu Yang, Feng Qiu, Qi–Chuan Jiang

Materials

DOI

2024

Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles

Chi Sun, Zhanyi Cao, Yanzhu Jin, Hongyu Cui, Chenggang Wang, Feng Qiu, Shi–Li Shu

Materials

DOI

2024

Thermal fatigue performance enhancement of new high-Cr martensitic die steels based on overall microstructure manipulation by trace TiC–TiB2 nanoparticles

Chuan-De Li, Yi-Lu Li, Yun-Zhi Zou, Yue-Heng Lin, Hong‐Yu Yang, Hong‐Yu Yang, Jia Meng, Liang‐Yu Chen, Feng Qiu, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2024

Excellent strength-toughness combination of NiAl–30Cr composites with novel in situ composite microstructure containing NiAl matrix and Cr single-phase

Yuan-Zheng Wei, Li-Yan Zhao, Ling-Han Shi, Hong‐Yu Yang, Rui‐Fen Guo, Hailong Zhao, Liang‐Yu Chen, Feng Qiu, Qi‐Chuan Jiang, Lai‐Chang Zhang

Materials Science and Engineering A

DOI

2024

Preparation of iron-based composites reinforced with submicron/nano-sized TiC ceramic particles by in-situ reaction in melts and one-step integrated hot pressing densification

Jie Liu, Yi-Lu Li, Aimin Li, Hong‐Yu Yang, Bai–Xin Dong, Xinmiao Zhong, Cheng-Gang Wang, Zhigang Li, De‐Li Chen, Yu Yang, Shi–Li Shu, Chang-Jie Luo, Jian Qiao, Ming Zhi Zhu, Feng Qiu, Qi–Chuan Jiang

Ceramics International

DOI

2024

Microstructure and mechanical properties of austenitic stainless steels manipulated by trace TiC–TiB2 nanoparticles

Qianwei Chen, Bingxu Wang, Yong Xu, Feng Qiu, Bai–Xin Dong, Xiaofu Chen, Deli Chen, Gaoshen Cai, Gary C. Barber

Journal of Materials Research and Technology

DOI

2024

Dissimilar joining of aluminum alloy and low-alloy carbon steel by resistance spot welding

Yong Xu, Qianwei Chen, Bingxu Wang, Feng Qiu, Bai–Xin Dong, Hongjun Li, Zude Feng, Gary C. Barber

Journal of Materials Research and Technology

DOI

2024

Thin-walled and large-sized magnesium alloy die castings for passenger car cockpit: Application, materials, and manufacture

Lei Zhan, Yumeng Sun, Yang Song, Chun-hua Kong, Kai Ma, Bai–Xin Dong, Hong‐Yu Yang, Shi–Li Shu, Feng Qiu

China Foundry

DOI

2024

Research progress, application and development of high performance 6000 series aluminum alloys for new energy vehicles

Yi-Cheng Gao, Bai–Xin Dong, Hong‐Yu Yang, Xiao-Yan Yao, Shi–Li Shu, Jie Kang, Jia Meng, Chang-Jie Luo, Cheng-Gang Wang, Kuang Cao, Jian Qiao, Ming Liang Zhu, Feng Qiu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2024

Sub-rapid solidification microstructure characteristics and control mechanisms of twin-roll cast aluminum alloys: A review

Xian Ming Wu, Zhiping Guan, Hong‐Yu Yang, Bai–Xin Dong, Lai‐Chang Zhang, Jia Meng, Chang-Jie Luo, Cheng-Gang Wang, Kuang Cao, Jian Qiao, Shi–Li Shu, Jie Kang, Ming Liang Zhu, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2024

A Novel Design to Enhance the Tribological Properties of High‐Cr Hot Work Die Steel via Trace TiC Ceramic Nanoparticles

Bingxu Wang, Yong Xu, Lei Chen, Feng Qiu, Fang Chang, Bai–Xin Dong, Gaoshen Cai, Gary C. Barber

steel research international

DOI

2024

Recent progress of Al–Mg alloys: Forming and preparation process, microstructure manipulation and application

Chang-Rong Song, Bai–Xin Dong, Siyu Zhang, Hong‐Yu Yang, Lin Liu, Jie Kang, Jia Meng, Chang-Jie Luo, Cheng-Gang Wang, Kuang Cao, Jian Qiao, Shi–Li Shu, Ming Liang Zhu, Feng Qiu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2024

Preparation, reaction mechanism and microwave-absorbing application of functional transition metal carbide/nitride ceramic materials

Zhengbo Xu, Shuqing Kou, Bai–Xin Dong, Xinmiao Zhong, Hong‐Yu Yang, Lin Liu, Rui‐Fen Guo, Shi–Li Shu, Feng Qiu, Lai‐Chang Zhang

Journal of Materials Research and Technology

DOI

2024

Advance on rock-breaking cutter steels: A review of characteristics, failure modes, molding processes and strengthening technology

Ying Jiang, Bai–Xin Dong, Jun Fan, Feng Qiu, Hong‐Yu Yang, Shi–Li Shu, Fang Chang, Qi‐Chuan Jiang, Lai‐Chang Zhang

Journal of Materials Research and Technology

DOI

2024

Effects and mechanisms of rare earth and calcium on the flame retardancy of magnesium alloys

Tian Zheng, Bai–Xin Dong, Xian-Wen Chen, Jun Fan, Hong‐Yu Yang, Shi–Li Shu, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2024

Insights into the microstructure evolution and wear resistance of Nano-TiC particles reinforced High-Cr hot work die steel

Bingxu Wang, Yong Xu, Lei Chen, Zhibo Zhu, Feng Qiu, Fang Chang, Bai–Xin Dong, Gary C. Barber

Journal of Materials Research and Technology

DOI

2024

Microstructure, solidification defects and mechanical properties of high-modulus and high-strength SiC/AlSi10Mg composites fabricated by selective laser melting

Xiang-Yi Song, Shi–Li Shu, Shuang Zhang, Hong‐Yu Yang, Feng Qiu, Qi‐Chuan Jiang

Ceramics International

DOI

2024

Research progress on nanoparticles reinforced magnesium alloys

Yuxin Luo, Bai–Xin Dong, Hong‐Yu Yang, Feng Qiu, Bai-Chuan Yan, Shi–Li Shu, Qi‐Chuan Jiang, Fengjian Shi

Journal of Materials Research and Technology

DOI

2024

Effects of various proportions TiB2p-TiCp reinforced Al–Cu–Mg composites in high-temperature mechanical properties and sliding wear behaviors

Xinmiao Zhong, Qingyuan Li, Yingze Gong, Xiang-Zheng Duan, Yong Shao, Hong‐Yu Yang, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2024

Review on manufacturability and strengthening mechanisms of particulate reinforced Mg composites

Yuze Zhang, Bai–Xin Dong, Cheng-Gang Wang, Bai-Chuan Yan, Hong‐Yu Yang, Feng Qiu, Shi–Li Shu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2024

Dual-gradient ceramic/aluminum composite structure fabricated by arc additive manufacturing with co-conveying of wire and powder

Jianxin Sun, Jin Wang, Daxin Zeng, Wenfang Li, Shuoxun Jin, Feng Qiu, Ping Shen

Materials Research Letters

DOI

2024

The role of Ti in the phase transformation and microstructure manipulation of ZrCu alloys with excellent mechanical properties

Shi–Li Shu, Xiuyan Chen, Yuan-Zheng Wei, Shuyu Xie, Shuang Zhang, Feng Qiu, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2024

Improved Creep Property of Super304H Steel with Minute Amounts of TiC/TiB2 Nano-Particles at 600 °C and 330 MPa

Xingyu Liu, Ying Han, Zhenxin Duan, Guoqing Zu, Feng Qiu, Weiwei Zhu, Xu Ran

Metals and Materials International

DOI

2024

Metallurgy and Solidification Microstructure Control of Fusion-Based Additive Manufacturing Fabricated Metallic Alloys: A Review

Qiang Li, Xing-Ran Li, Bai–Xin Dong, Xiaolong Zhang, Shi–Li Shu, Feng Qiu, Lai‐Chang Zhang, Zhihui Zhang

Acta Metallurgica Sinica (English Letters)

DOI

2023

材料成型及控制工程专业“生产实习”课程思政教学探索

邱丰，杨宏宇，舒世立，常芳

《教育教学论坛》

2023

Friction stir welding of high strength and toughness cast Al-Si7-Cu4-Mg0.3 alloys manipulated by in-situ nanocrystals

Tian-Jing Miao, Siyu Zhang, Feng Qiu, Hong‐Yu Yang, Tianshu Liu, Shi–Li Shu, Tao-Tao Duan, Qi‐Chuan Jiang

Journal of Materials Processing Technology

DOI

2023

Development Trend in Composition Optimization, Microstructure Manipulation, and Strengthening Methods of Die Steels under Lightweight and Integrated Die Casting

Ze-Ju Bao, Hong‐Yu Yang, Bai–Xin Dong, Fang Chang, Chuan-De Li, Ying Jiang, Liang‐Yu Chen, Shi–Li Shu, Qi‐Chuan Jiang, Feng Qiu

Materials

DOI

2023

The Role of Lithium in the Aging Precipitation Process of Al-Zn-Mg-Cu Alloys and Its Effect on the Properties

Jingran Sun, Bai–Xin Dong, Hong‐Yu Yang, Shi–Li Shu, Feng Qiu, Qi–Chuan Jiang, Lai‐Chang Zhang

Materials

DOI

2023

In-situ tailoring microstructure by directly synthesized TiC–TiB2 nanoparticles to achieve well-balanced strength and ductility in Al–Cu alloy

Heli Peng, Cheng Chuang Jin, Bai–Xin Dong, Xianjun Zhou, Zheng Wang, Yong Shao, Hong‐Yu Yang, Feng Qiu

Materials Science and Engineering A

DOI

2023

Manipulating interface bonding and microstructure via tuning interfacial reaction for enhancing mechanical property of in-situ TiC/Al cermets

Yifan Yan, Shuqing Kou, Hong‐Yu Yang, Bai–Xin Dong, Shi–Li Shu, Liang‐Yu Chen, Feng Qiu, Lai‐Chang Zhang

Journal of Materials Processing Technology

DOI

2023

Microstructure and mechanical properties of S30432 steel modified by trace TiC/TiB2 nano-particles

Xingyu Liu, Ying Han, Guoqing Zu, Feng Qiu, Weiwei Zhu, Xu Ran

Materials Science and Engineering A

DOI

2023

Insights into the influences of nanoparticles on microstructure evolution mechanism and mechanical properties of friction-stir-welded Al 6061 alloys

Tianshu Liu, Feng Qiu, Hong‐Yu Yang, Shi–Li Shu, Jian-Feng Xie, Qi–Chuan Jiang, Lai‐Chang Zhang

Materials Science and Engineering A

DOI

2023

Novel method to achieve synergetic strength–ductility improvement of Al–Cu alloy by in situ TiC–TiB2 particles via direct reaction synthesis

Xudong Ma, Hong‐Yu Yang, Bai–Xin Dong, Shi–Li Shu, Zheng Wang, Yong Shao, Qi–Chuan Jiang, Feng Qiu

Materials Science and Engineering A

DOI

2023

Effect of Cu content on central-segregation composition and mechanical properties of Al–Mg–Si alloys produced by twin-roll casting

Xian Wu, Zhiping Guan, Zhi-Zheng Yang, Xuan Wang, Feng Qiu, Hui‐Yuan Wang

Materials Science and Engineering A

DOI

2023

Review on laser directed energy deposited aluminum alloys

Tianshu Liu, Peng Chen, Feng Qiu, Hong‐Yu Yang, Nicholas Yew Jin Tan, Youxiang Chew, Di Wang, Ruidi Li, Qi‐Chuan Jiang, Chaolin Tan

International Journal of Extreme Manufacturing

DOI

2023

Significantly enhanced fatigue resistance and mechanisms of hypoeutectic Al-Si composite calibrated using trace in-situ nanocrystals

Tianshu Liu, Lin Sen Zhu, Hong‐Yu Yang, Hongyu Cui, Jia Meng, Feng Qiu, Bai–Xin Dong, Shi–Li Shu, Qi‐Chuan Jiang, Lai‐Chang Zhang

Composites Part B Engineering

DOI

2023

Development of ceramic nanoparticles reinforced high Cr tool and die steels with high comprehensive performance

Ying Jiang, Yun-zhi Zou, Hong‐Yu Yang, Yue-Heng Lin, Rui‐Fen Guo, Feng Qiu, He Zhang, Chuan-De Li, Fang Chang, Fengjian Shi, Qi‐Chuan Jiang

Ceramics International

DOI

2023

Review on role of intermetallic and ceramic particles in recrystallization driving force and microstructure of wrought Al alloys

Tianshu Liu, Bai–Xin Dong, Hong‐Yu Yang, Feng Qiu, Shi–Li Shu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2023

Development and applications of aluminum alloys for aerospace industry

Shuangshuang Li, Xin Yan Yue, Q. Li, Heli Peng, Bai–Xin Dong, Tianshu Liu, Hong‐Yu Yang, Jun Fan, Shi–Li Shu, Feng Qiu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2023

Microstructure-based simulation on the mechanical behavior of particle reinforced metal matrix composites with varying particle characteristics

Yifan Yan, Shuqing Kou, Hong‐Yu Yang, Shi–Li Shu, Fengjian Shi, Feng Qiu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2023

Effect of Nano‐TiC Ceramic Particles on Microstructures and Properties of High‐Cr Steel under Different Heat‐Treatment Conditions

Fang Chang, Shi–Li Shu, Chuan-De Li, Feng Qiu, Qi–Chuan Jiang

Advanced Engineering Materials

DOI

2023

Dry Sliding Wear Properties of Annealed Carbon Steels Matrix Composites by Nanosized TiC‐TiB2 Particles

Yu Zhang, Bingxu Wang, Feng Qiu, Bai–Xin Dong, Zhijun Wu, Hongjun Li, Gary C. Barber

Advanced Engineering Materials

DOI

2023

Microstructure and Wear Resistance of Gray Cast Iron Synergistically Manipulated by Nano-sized TiC–TiB2 Ceramic Particles

Yu Zhang, Bingxu Wang, Bai–Xin Dong, Feng Qiu, Gary C. Barber, Qian Zou

Tribology Letters

DOI

2023

Microstructure Refinement and Work-Hardening Behaviors of NiAl Alloy Prepared by Combustion Synthesis and Hot Pressing Technique

Jiayu Hu, Shuang Zhang, Longjiang Zhang, Fan Peng, Hailong Zhao, Feng Qiu

Metals

DOI

2023

Hot-work die steel with superior mechanical properties at room and high temperatures prepared via a combined approach of composition design and nanoparticle modification

Fang Chang, Chuan-De Li, Hong‐Yu Yang, Feng Qiu, Shi–Li Shu, Liang‐Yu Chen, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2023

Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: preparation, performance, and mechanisms

Yifan Yan, Shuqing Kou, Hong‐Yu Yang, Shi–Li Shu, Feng Qiu, Qi‐Chuan Jiang, Lai‐Chang Zhang

International Journal of Extreme Manufacturing

DOI

2023

Effect of Mg and Si contents and TiC nanoparticles on the center segregation susceptibility of twin-roll cast Al–Mg–Si alloys

Bao Wang, Qinglong Zhao, Feng Qiu, Qi‐Chuan Jiang

Journal of Materials Research and Technology

DOI

2023

Synergistic optimization of mechanical and tribological properties of TiC modified copper-graphite composites by direct current in-situ sintering

Yifan Yan, Shuqing Kou, Hong‐Yu Yang, Yong Shao, Feng Qiu, Shi–Li Shu

Ceramics International

DOI

2023

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Yifan Yan, Xi Zhang, Yong Shao, Hong‐Yu Yang, Feng Qiu, Shi–Li Shu, Shuqing Kou

Journal of Materials Research and Technology

DOI

2023

Experimental determination of surface energy for high-energy surface: A review

Shirong Zhu, Kaibin Xie, Qiaoli Lin, Rui Cao, Feng Qiu

Advances in Colloid and Interface Science

DOI

2023

The effect of the TiC-TiB2 nanoparticles on the microstructure and mechanical properties of Al-Mn-Si strips fabricated by twin-roll casting

Bao Wang, Zhenwei Ji, Feng Qiu, Qinglong Zhao, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2023

Superior wear resistance of dual-phased TiC–TiB2 ceramic nanoparticles reinforced carbon steels

Yu Zhang, Bingxu Wang, Feng Qiu, Hong‐Yu Yang, Gary C. Barber

Journal of Materials Research and Technology

DOI

2023

Instantaneous efficient microstructure manipulation of eutectic Al Si alloy by trace in-situ nanoparticles and their mechanism in superior tensile properties

Lin Sen Zhu, Feng Qiu, Lian-Yi Shan, Hong‐Yu Yang, Shi–Li Shu, Yong Shao, Qi‐Chuan Jiang

Materials Characterization

DOI

2023

Application of ceramic nanoparticles in microstructure manipulation and simultaneously strengthening toughness and wear resistance of tool and die steels

Chuan-De Li, Wenxin Wang, Feng Qiu, He Zhang, Shi–Li Shu, Tai-Yu Li, Qi–Chuan Jiang

Ceramics International

DOI

2023

Enhancement in Sliding Wear Resistance of As-Cast Graphite Ductile Irons via Trace TiC-TiB2 Nanoparticles

Bingxu Wang, Weiwei Cui, Feng Qiu, Yu Zhang, Hong‐Yu Yang, Gary C. Barber, Ming Hu

Journal of Materials Engineering and Performance

DOI

2022

Role and mechanism of innovative addition process of trace nano-TiCp in microstructure manipulation and significant mechanical properties enhancement of H13 steels

Chuan-De Li, Feng Qiu, Hong‐Yu Yang, Fang Chang, Tai-Yu Li, He Zhang, Qi–Chuan Jiang

Journal of Materials Processing Technology

DOI

2022

Role of V in microstructure and strength enhancement of 4 vol% nano-TiB2/TiAl composites

Yuan-Zheng Wei, Shi–Li Shu, Yue Li, Hong‐Yu Yang, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2022

Strengthening of dislocation and precipitation for high strength and toughness casting Al–Zn–Mg–Cu alloy via trace TiB2+TiC particles

Shuangshuang Li, Feng Qiu, Hong‐Yu Yang, Shuan Liu, Tianshu Liu, Liangyu Chen, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2022

Versatility of trace nano-TiC–TiB2 in collaborative control of solidification-rolling-welding microstructural evolution in Al–Mg–Si alloy for enhanced properties

Tianshu Liu, Feng Qiu, Hong‐Yu Yang, Chaolin Tan, Bai–Xin Dong, Jian-Feng Xie, Shi–Li Shu, Qi–Chuan Jiang, Lai‐Chang Zhang

Materials Science and Engineering A

DOI

2022

Microstructure manipulation and strengthening mechanism of TiAl composites reinforced by Cr solid solution and in-situ nanometer-sized TiB2 particles

Yuan-Zheng Wei, Feng Qiu, Shi–Li Shu, Haotian Tong, Hong‐Yu Yang, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2022

Effect of laser fusion repair on the microstructure and properties of stainless steel laser welds

Yu Zhang, Xin Li, Yanxin Wang, Lei Kang, Ting Wang, Feng Qiu

Journal of Materials Research and Technology

DOI

2022

Exploring the potential of FSW-ed Al–Zn–Mg–Cu-based composite reinforced by trace in-situ nanoparticles in manufacturing workpiece with customizable size and high mechanical performances

Tianshu Liu, Feng Qiu, Hong‐Yu Yang, Shuan Liu, Qi–Chuan Jiang, Lai‐Chang Zhang

Composites Part B Engineering

DOI

2022

Multilevel microstructure control of cast Al–7.0Si–4.0Cu alloy with high strength–toughness synergy via micro-alloying combined with manipulation by in-situ nano-ceramics

Tianshu Liu, Feng Qiu, Shi–Li Shu, Shuqing Kou, Hong‐Yu Yang, Tao-Tao Duan, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2022

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al–Si alloys controlled by trace in-situ nano-Fe2B and nano-Fe3Si

Xiang-Yi Song, Yajie Wang, Jingxin Zhang, Dong-Ao Du, Jin-Guo Xu, Fan Peng, Taotao Li, Long Jiang Zhang, Shi–Li Shu, Xin Li, Feng Qiu

Journal of Materials Research and Technology

DOI

2022

Microstructure and mechanical properties of aluminum alloy composites with endogenous nano-TiCp

Xiang-Yi Song, Yajie Wang, Jingxin Zhang, Dong-Ao Du, Hong‐Yu Yang, Liang Zhao, Fan Peng, Xin Li, Feng Qiu

Ceramics International

DOI

2022

Investigation on the elevated-temperature tribological behaviors and mechanism of Al-Cu-Mg composites reinforced by in-situ size-tunable TiB2-TiC particles

Bai–Xin Dong, Qingyuan Li, Shi-Li Shu, Xiang-Zheng Duan, Qian Zou, Xue Ting Han, Hong‐Yu Yang, Feng Qiu, Qi–Chuan Jiang

Tribology International

DOI

2022

Microstructure and shearing strength of stainless steel/low carbon steel joints produced by resistance spot welding

Bingxu Wang, Feng Qiu, Lei Chen, Qunchao Zhou, Bai–Xin Dong, Hongyu Yang, Jing Yang, Zude Feng, Na Tyrer, Gary C. Barber, Ming Hu

Journal of Materials Research and Technology

DOI

2022

The effect of Mg/Si ratio on the microstructure and tensile properties of twin-roll casting Al-Mg-Si alloys

Bao Wang, Xiao Liu, Yunlong Zhu, Chunfeng Ma, Feng Qiu, Qinglong Zhao, Qi‐Chuan Jiang

Materials Characterization

DOI

2022

Enhancing the strength-ductility synergy of Fe-based composites by changing interface bonding between matrix and TiCx with various stoichiometric ratios

Xinmiao Zhong, Wenxin Wang, Yue Han, Xin Li, Shuqing Kou, Feng Qiu

Ceramics International

DOI

2022

The effect of carbon source and molar ratio in Fe–Ti–C system on the microstructure and mechanical properties of in situ TiC/Fe composites

Zheng-Bo Xu, Shuqing Kou, Hong‐Yu Yang, Bai–Xin Dong, Yue Han, Liang-Yu Chen, Feng Qiu, Qi–Chuan Jiang

Ceramics International

DOI

2022

Synergistic optimization in microstructure and mechanical properties of low carbon steel via trace amount of nano-sized TiC-TiB2

Bingxu Wang, Yu Zhang, Feng Qiu, Bai–Xin Dong, Hongjun Li, Zirui Hu, Yongfeng Yuan, S.Y. Guo, Min Zhu, Simin Yin, Yongping Jin, Gary C. Barber

Materials Characterization

DOI

2022

High-content continuous carbon fibers reinforced PEEK matrix composite with ultra-high mechanical and wear performance at elevated temperature

Jun-Nan Dai, Shuqing Kou, Hong‐Yu Yang, Zheng-Bo Xu, Shi–Li Shu, Feng Qiu, Qi–Chuan Jiang, Lai‐Chang Zhang

Composite Structures

DOI

2022

Effect of Cu and Zn elements on morphology of ceramic particles and interfacial bonding in TiB2/Al composites

Xin Zhang, Jiayu Hu, Bai–Xin Dong, Xin Li, Shuqing Kou, Shuang Zhang, Feng Qiu

Ceramics International

DOI

2022

Remarkably enhancing mechanical and degradation performance of cast MgZn1.2 alloys via small amount addition of zirconium combined with hot extrusion for orthopedic applications

Jun Fan, Yongqi Wu, Xin Qiu, Zheng Tian, Jian Meng, Peng Wan, Chen Li, Bai–Xin Dong, Feng Qiu

Journal of Materials Research and Technology

DOI

2022

Kinetic analysis of wetting and spreading at high temperatures: A review

Qiaoli Lin, Kaibin Xie, Ran Sui, Dekui Mu, Rui Cao, Jinghuan Chang, Feng Qiu

Advances in Colloid and Interface Science

DOI

2022

The Effect of Shot-Peening Time on Tribological Behavior of AISI5160 Steel

Xue Ting Han, Zhenpu Zhang, Bo Pang, Gary C. Barber, Jianxin Zhao, Feng Qiu

Tribology Transactions

DOI

2022

Microstructure manipulation mechanism and mechanical properties improvement of H13 steel via trace nano-(TiC + TiB2) particles

He Zhang, Feng Qiu, Hong‐Yu Yang, Wenxin Wang, Shi–Li Shu, Qi–Chuan Jiang

Materials Characterization

DOI

2022

Effects of alloy elements (Mg, Zn) on the microstructure and mechanical properties of (TiC+TiB2)/Al composites

Shuangshuang Li, He Zhang, Fang Chang, Yu-Nan Fei, Shuqing Kou, Yong Shao, Qianqian Xuan, Xin Li, Feng Qiu

Ceramics International

DOI

2022

Synergistic optimization in solidification microstructure and mechanical performance of novel (TiC N − TiB2)p/Al nanocomposites: Design, tuning and mechanism

Bai–Xin Dong, Qiang Li, Hong‐Yu Yang, Tianshu Liu, Feng Qiu, Shi–Li Shu, Qi–Chuan Jiang, Lai‐Chang Zhang

Composites Part A Applied Science and Manufacturing

DOI

2022

Microstructural Configuration and Impact Toughness of Graphite Ductile Iron Reinforced by Trace Amount of TiC-TiB2 Nanoparticles

Weiwei Cui, Bingxu Wang, Feng Qiu, Yu Zhang, Jing Yang, Zhaoxia Zhang, Gary C. Barber, Ming Yao Hu

Journal of Materials Engineering and Performance

DOI

2022

Role of In-Situ Nanocrystalline in Solidification Behaviors Manipulation, Microstructure Refinement, and Mechanical Properties Enhancement of Al-Cu4/Al-Mg1 Alloys

Xiao-Yan Yao, Feng Qiu, Hong‐Yu Yang, Shi–Li Shu, Taotao Li, Qi–Chuan Jiang

Materials Characterization

DOI

2021

纳米TiC-TiB2颗粒对球墨铸铁铸态组织和力学性能的影响

王丙旭，胡子瑞，邱丰，胡明，崔威威，杨金林，张宇

《铸造技术》

DOI

2021

Insight into solidification microstructure control by trace TiCN–TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al–Si–Mg alloy

Qiang Li, Bai–Xin Dong, Tianshu Liu, Hong‐Yu Yang, Shi–Li Shu, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2021

Microstructure evolution and mechanical property enhancement of high-Cr hot work die steel manipulated by trace amounts of nano-sized TiC

Fang Chang, He Zhang, Yunlei Gao, Shi–Li Shu, Feng Qiu, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2021

Microstructural configuration and compressive deformation behavior of a TiAl composite reinforced by Mn and in situ Ti2AlC particles

Yun-lei Gao, Shuqing Kou, Jun-Nan Dai, Zhifa Wang, Shi–Li Shu, Shuang Zhang, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2021

Microstructure manipulation and strengthening mechanisms of 40Cr steel via trace TiC nanoparticles

He Zhang, Wenxin Wang, Fang Chang, Chuan-Lu Li, Shi–Li Shu, Zhifa Wang, Xue Ting Han, Qian Zou, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2021

Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles

Feng Qiu, He Zhang, Chuan-Lu Li, Zhifa Wang, Fang Chang, Hong‐Yu Yang, Chuan-De Li, Xue Ting Han, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2021

Synergistic effects of the TiC nanoparticles and cold rolling on the microstructure and mechanical properties of Al–Cu strips fabricated by twin-roll casting

Xiao Liu, Zhenwei Ji, Yegang Song, Bao Wang, Yunlong Zhu, Feng Qiu, Qinglong Zhao, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2021

Role of nano-sized materials as lubricant additives in friction and wear reduction: A review

Bingxu Wang, Feng Qiu, Gary C. Barber, Qian Zou, Jing Wang, S.Y. Guo, Yongfeng Yuan, Qi–Chuan Jiang

Wear

DOI

2021

Influences of dual-phased nanoparticles on microstructure, mechanical properties and wear resistance of vermicular graphite cast iron

Bingxu Wang, Feng Qiu, Yu Zhang, Jing Yang, Weiwei Cui, Yongping Jin, Gaoshen Cai, Yongfeng Yuan, S.Y. Guo, Hongjun Li, Gary C. Barber

Materials Letters

DOI

2021

Microstructures, compressive residual stress, friction behavior, and wear mechanism of quenched and tempered shot peened medium carbon steel

Xue Ting Han, Zhenpu Zhang, Baishu Wang, Steven J. Thrush, Gary C. Barber, Feng Qiu

Wear

DOI

2021

Role of trace nanoparticles in manipulating the widmanstatten structure of low carbon steel

Bingxu Wang, Yu Zhang, Feng Qiu, Gaoshen Cai, Weiwei Cui, Zirui Hu, He Zhang, Na Tyrer, Gary C. Barber

Materials Letters

DOI

2021

Microstructure Refinement and Strengthening–Toughening Mechanisms of Gray Cast Irons Reinforced by In Situ Nanosized TiB2–TiC/Al Master Alloy

Bingxu Wang, Yu Zhang, Feng Qiu, Weiwei Cui, Zirui Hu, Gary C. Barber, Ming Yao Hu

Advanced Engineering Materials

DOI

2021

Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation

Hong‐Yu Yang, Yifan Yan, Tianshu Liu, Bai–Xin Dong, Liang‐Yu Chen, Shi–Li Shu, Feng Qiu, Qi‐Chuan Jiang, Lai‐Chang Zhang

Composites Part B Engineering

DOI

2021

Interfacial reaction behavior and evolution mechanism at a preoxidized SiCox/Al interface

Haotian Tong, Rui Lin Zuo, Dong Qiu, Xin Shane Li, Feng Qiu

Journal of Materials Research and Technology

DOI

2021

Bainite kinetic energy, activation energy, and tribological behavior of austempered AISI4340 steel

Xue Ting Han, Jiayu Hou, Zhenpu Zhang, Gary C. Barber, Feng Qiu, Fang Chang, Shuqing Kou

Journal of Materials Research and Technology

DOI

2021

Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al–Cu nanocomposites

Yu-Yang Gao, Feng Qiu, Qian Zou, Jian-Ge Chu, Bai–Xin Dong, Xue Ting Han, Hong‐Yu Yang, Bin Jiang, Qi‐Chuan Jiang

Ceramics International

DOI

2021

Corrigendum to “Simultaneously enhanced hardness and toughness of normalized graphite ductile irons by TiC-TiB2 nanoparticles” [Mater. Lett. 291 (2021) 129597]

Bingxu Wang, Yu X. Zhang, Feng Qiu, Mingming Hu, Weiwei Cui, Zi-Rui Hu, Gary C. Barber

Materials Letters

DOI

2021

Comparison of the effects of Mg and Zn on the interface mismatch and compression properties of 50 vol% TiB2/Al composites

Hong‐Yu Yang, Zhong-Jie Cai, Qun Zhang, Yong Shao, Bai–Xin Dong, Qianqian Xuan, Feng Qiu

Ceramics International

DOI

2021

Microstructure and Tensile Properties of Graphite Ductile Iron Improved by Minor Amount of Dual‐Phased TiC–TiB2 Nanoparticles

Bingxu Wang, Feng Qiu, Weiwei Cui, Yongping Jin, Yu Zhang, Zirui Hu, Gary C. Barber

Advanced Engineering Materials

DOI

2021

Investigation of the Effect of Heat Treatment on the Microstructures and Mechanical Properties of Al-13Si-5Cu-2Ni Alloy

Zhifa Wang, Tian-Jing Miao, Shuqing Kou, Shuang Zhang, Feng Qiu

Metals

DOI

2021

Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution

Bai–Xin Dong, Qiang Li, Zhifa Wang, Tianshu Liu, Hong‐Yu Yang, Shi–Li Shu, Liang‐Yu Chen, Feng Qiu, Qi‐Chuan Jiang, Lai‐Chang Zhang

Composites Part B Engineering

DOI

2021

Role of trace nanoparticles in establishing fully optimized microstructure configuration of cold-rolled Al alloy

Tianshu Liu, Feng Qiu, Bai–Xin Dong, Run Geng, Min Zha, Hong‐Yu Yang, Shi–Li Shu, Qi‐Chuan Jiang

Materials & Design

DOI

2021

Simultaneously enhanced hardness and toughness of normalized graphite ductile irons by TiC-TiB2 nanoparticles

Bingxu Wang, Yu Zhang, Feng Qiu, Ming Hu, Wei-Wei Cui, Zirui Hu, Gary C. Barber

Materials Letters

DOI

2021

Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles

Bai–Xin Dong, Xudong Ma, Tianshu Liu, Qiang Li, Hong‐Yu Yang, Shi–Li Shu, Bing‐Qi Zhang, Feng Qiu, Qi‐Chuan Jiang

Journal of the American Ceramic Society

DOI

2021

Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties

Hong‐Yu Yang, Zheng Wang, Liang‐Yu Chen, Shi–Li Shu, Feng Qiu, Lai‐Chang Zhang

Composites Part B Engineering

DOI

2021

The Application of Computer Simulation in “Yeong Guan Cup” Casting Process Design Competition

Fang Chang, Feng Qiu, Jinguo Wang, Kai Xuan Zhu

Lecture notes on data engineering and communications technologies

DOI

2020

FeBSi非晶合金对ZL107合金组织性能影响的试验研究

常芳，张双，邱丰，何洋，朱琳

《特种铸造及有色合金》

DOI

2020

Multiscale design of α-Al, eutectic silicon and Mg2Si phases in Al-Si-Mg alloy manipulated by in situ nanosized crystals

Lin Sen Zhu, Feng Qiu, Qian Zou, Xue Ting Han, Shi–Li Shu, Hong‐Yu Yang, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2020

Investigation of the influences of ternary Mg addition on the solidification microstructure and mechanical properties of as-cast Al–10Si alloys

Qiang Li, Feng Qiu, Bai–Xin Dong, Hong‐Yu Yang, Shi–Li Shu, Min Zha, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2020

The lamella structure of Al-Mg-Si matrix nanocomposites with isotropically high strength

Run Geng, Feng Qiu, Qinglong Zhao, Qi‐Chuan Jiang

Materialia

DOI

2020

Effect mechanism of in situ nano-intermetallic inoculation on the multilevel microstructure and mechanical properties of Al-13Si alloys

Tao-Tao Duan, Feng Qiu, Lin Sen Zhu, Taotao Li, Hong‐Yu Yang, Zhihao Bai, Min Zha, Lian-Yi Shan, Qi‐Chuan Jiang

Materialia

DOI

2020

Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles

Qiang Li, Feng Qiu, Bai–Xin Dong, Xiang Gao, Shi–Li Shu, Hong‐Yu Yang, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2020

Retraction notice to “The effect and mechanism of alloying elements on Al/SiC interfacial reaction in Al melt” [Appl. Surf. Sci. 501 (2020) 144265]

Haotian Tong, Feng Qiu, Rui Lin Zuo, Ping Shen, Xiaoshuang Cong, Jingshen Liu, Hong‐Yu Yang, Qi–Chuan Jiang

Applied Surface Science

DOI

2020

Pearlitic structure and wear properties of graphite cast iron reinforced with biphase TiC-TiB 2 nanoparticles

Bingxu Wang, Weiwei Cui, Feng Qiu, Wenhui Du, Yuanbin Chen, Gary C. Barber

Surface Topography Metrology and Properties

DOI

2020

Sliding wear behavior of laser surface hardened austempered ductile iron

Xue Ting Han, Zhenpu Zhang, Yuming Pan, Gary C. Barber, Hong‐Yu Yang, Feng Qiu

Journal of Materials Research and Technology

DOI

2020

Tribological behavior of heat treated AISI 6150 steel

Xue Ting Han, Zhenpu Zhang, Jiayu Hou, Steven J. Thrush, Gary C. Barber, Qian Zou, Hong‐Yu Yang, Feng Qiu

Journal of Materials Research and Technology

DOI

2020

Microstructure, wear behavior and surface hardening of austempered ductile iron

Bingxu Wang, Feng Qiu, Gary C. Barber, Yuming Pan, Weiwei Cui, Rui Wang

Journal of Materials Research and Technology

DOI

2020

Effects of quench-tempering and laser hardening treatment on wear resistance of gray cast iron

Bingxu Wang, Yuming Pan, Yu Liu, Na Lyu, Gary C. Barber, Rui Wang, Weiwei Cui, Feng Qiu, Ming Hu

Journal of Materials Research and Technology

DOI

2020

Comparison of in situ nanocrystals, Sr and nanocrystals + Sr manipulating microstructures and mechanical properties of eutectic Al–Si13.0–Cu5.0–(Ni2.0)–Mg0.6 alloy

Tianshu Liu, Jian-Rong Zhao, Tian-Jing Miao, Xue Ting Han, Shuang Zhang, Feng Qiu

Journal of Materials Research and Technology

DOI

2020

Simultaneously increased strength and ductility via the hierarchically heterogeneous structure of Al-Mg-Si alloys/nanocomposite

Run Geng, Qinglong Zhao, Feng Qiu, Qi‐Chuan Jiang

Materials Research Letters

DOI

2020

In situ nanocrystals manipulate solidification behavior and microstructures of hypereutectic Al-Si alloys by Zr-based amorphous alloys

Shuan Liu, Xin Zhang, Heli Peng, Xing Hua Han, Hong‐Yu Yang, Taotao Li, Lin Sen Zhu, Shuang Zhang, Feng Qiu, Zhihao Bai, Shuming Chen, Wei Zhou, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2020

Microstructure refinement and strengthening of Al–Cu alloys manipulated by nanocrystalline phases formed by in situ crystallization of Ni–Nb–Ti metallic glasses in melt

Taotao Li, Hong‐Yu Yang, Tian-Jing Miao, Heli Peng, Xu Chen, Lin Sen Zhu, Tao-Tao Duan, Feng Qiu, Zhihao Bai, Shuming Chen, Ying‐Ying Liu, Xue Ting Han, Shuang Zhang, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2020

Application of nanoparticles in cast steel: An overview

Feng Qiu, Tianshu Liu, Xin Zhang, Fang Chang, Shi–Li Shu, Hong‐Yu Yang, Qinglong Zhao, Qi‐Chuan Jiang

China Foundry

DOI

2020

Microstructural and performance characterization of in-situ biphasic micro-nano scale (TiB2-TiCx)/Al-Cu-Mg composites with different ceramic and metal ratios designed for compact integration

Xiang-Zheng Duan, Bo-Da Xin, Tian-Jing Miao, Jian-Feng Xie, Hong‐Yu Yang, Xue Ting Han, Feng Qiu, Xiujuan Li

Journal of Materials Research and Technology

DOI

2020

Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloy

Run Geng, Siqi Jia, Feng Qiu, Qinglong Zhao, Qi‐Chuan Jiang

Corrosion Science

DOI

2020

Tribological behavior of shot peened/austempered AISI 5160 steel

Xue Ting Han, Zhenpu Zhang, Jiayu Hou, Gary C. Barber, Feng Qiu

Tribology International

DOI

2019

综述:SiC/Al界面反应与界面结构演变规律及机制

邱丰，佟昊天，沈平，丛晓霜，王轶，姜启川

《金属学报》

2019

A review: phase transformation and wear mechanisms of single-step and dual-step austempered ductile irons

Bingxu Wang, Gary C. Barber, Feng Qiu, Qian Zou, Hong‐Yu Yang

Journal of Materials Research and Technology

DOI

2019

The Synthesis, Structure, Morphology Characterizations and Evolution Mechanisms of Nanosized Titanium Carbides and Their Further Applications

Bai–Xin Dong, Feng Qiu, Qiang Li, Shi–Li Shu, Hong‐Yu Yang, Qi–Chuan Jiang

Nanomaterials

DOI

2019

Design of TiC nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation

Bai–Xin Dong, Hong‐Yu Yang, Feng Qiu, Qiang Li, Shi–Li Shu, Bing‐Qi Zhang, Qi‐Chuan Jiang

Materials & Design

DOI

2019

Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation

Lin Sen Zhu, Tianshu Liu, Tao-Tao Duan, Taotao Li, Feng Qiu, Hong‐Yu Yang, Zhihao Bai, Ying‐Ying Liu, Qi‐Chuan Jiang

Materials & Design

DOI

2019

Microstructure refinement and strengthening mechanisms of bimodal-sized and dual-phased (TiCn-Al3Tim)/Al hybrid composites assisted ultrasonic vibration

Qiang Li, Feng Qiu, Yu-Yang Gao, Bai–Xin Dong, Shi–Li Shu, Ming-Ming Lv, Hong‐Yu Yang, Qinglong Zhao, Qi‐Chuan Jiang

Journal of Alloys and Compounds

DOI

2019

Effect of Preheating Temperature on the Microstructure and Tensile Properties of 6061 Aluminum Alloy Processed by Hot Rolling-Quenching

Qinglong Zhao, Tong-Tong Shan, Run Geng, Yang-Yang Zhang, Hongyun He, Feng Qiu, Qi‐Chuan Jiang

Metals

DOI

2019

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiCxNy–TiB2)/Ni cermets

Fang Chang, Feng Qiu, Chuan-Lu Li, Yawei Wang, Qi–Chuan Jiang

Progress in Natural Science Materials International

DOI

2019

A new approach for improving the elevated-temperature strength and ductility of Al–Cu–Mg–Si alloys with minor amounts of dual-phased submicron/nanosized TiB2–TiC particles

Yu-Yang Gao, Feng Qiu, Qinglong Zhao, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2019

Nanoparticulate dispersion, microstructure refinement and strengthening mechanisms in Ni-coated SiCp/Al-Cu nanocomposites

Jian-Feng Xie, Tianshu Liu, Qiang Li, Qingyuan Li, Zihan Xu, Feng Qiu, Jian Tang, Hong‐Yu Yang, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2019

Efficient microstructure refinement of Al–Si–Mg alloy manipulated by nanocrystals formed by in-situ crystallization in melt

Lin Sen Zhu, Feng Qiu, Dong Qiu, Tao-Tao Duan, Fang Chang, Taotao Li, Shi–Li Shu, Hong‐Yu Yang, Yang He, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2019

Wear behavior of composite strengthened gray cast iron by austempering and laser hardening treatment

Bingxu Wang, Yuming Pan, Yu Liu, Gary C. Barber, Feng Qiu, Ming Hu

Journal of Materials Research and Technology

DOI

2019

Bainite kinetic transformation of austempered AISI 6150 steel

Xue Ting Han, Zhenpu Zhang, Yanhao Rong, Steven J. Thrush, Gary C. Barber, Hong‐Yu Yang, Feng Qiu

Journal of Materials Research and Technology

DOI

2019

Dry sliding friction and wear characterization of in situ TiC/Al-Cu3.7-Mg1.3 nanocomposites with nacre-like structures

Lei Wang, Bai–Xin Dong, Feng Qiu, Run Geng, Qian Zou, Hong‐Yu Yang, Qingyuan Li, Zihan Xu, Qinglong Zhao, Qi–Chuan Jiang

Journal of Materials Research and Technology

DOI

2018

Effects of nanosized TiCp dispersion on the high-temperature tensile strength and ductility of in situ TiCp/Al-Cu-Mg-Si nanocomposites

Yu-Yang Gao, Feng Qiu, Run Geng, Jian-Ge Chu, Qinglong Zhao, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2018

Simultaneously Enhanced Strength, Toughness and Ductility of Cast 40Cr Steels Strengthened by Trace Biphase TiCx-TiB2 Nanoparticles

Chuan-Lu Li, Feng Qiu, Fang Chang, Xu-Min Zhao, Run Geng, Hong‐Yu Yang, Qinglong Zhao, Qi‐Chuan Jiang

Metals

DOI

2018

Effects of Carbon Source on TiC Particles’ Distribution, Tensile, and Abrasive Wear Properties of In Situ TiC/Al-Cu Nanocomposites Prepared in the Al-Ti-C System

Yu-Yang Gao, Feng Qiu, Tianshu Liu, Jian-Ge Chu, Qinglong Zhao, Qi‐Chuan Jiang

Nanomaterials

DOI

2018

Improving Elevated-Temperature Strength of an Al–Mn–Si Alloy by Strain-Induced Precipitation

Yangyang Zhang, Wei Jin, Xuanzhang Hao, Feng Qiu, Qinglong Zhao

Metals

DOI

2018

Preparation and characterization of the Al-Cu-Mg-Si-Mn composites reinforced by different surface modified SiCp

Yu-Yang Gao, Feng Qiu, Run Geng, Weixing Zhao, De-Long Yang, Rui Lin Zuo, Bai–Xin Dong, Xue Ting Han, Qi–Chuan Jiang

Materials Characterization

DOI

2018

Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano‐Sized Particles

Run Geng, Feng Qiu, Qi‐Chuan Jiang

Advanced Engineering Materials

DOI

2018

Superior Cryogenic Tensile Strength and Ductility of In Situ Al–Cu Matrix Composite Reinforced with 0.3 wt% Nano‐Sized TiCp

Run Geng, Wei–Si Tian, Qinglong Zhao, Feng Qiu, Qi‐Chuan Jiang

Advanced Engineering Materials

DOI

2018

Effects of ternary element additions on the generalized-stacking fault energy of Ti5Si3 in prismatic {11¯00}[0001] slip system: A first-principles study

Cheng Wang, Zhuang Yang, Xinyu Xu, Hui‐Yuan Wang, Min Zha, Feng Qiu, Qi–Chuan Jiang

Computational Materials Science

DOI

2018

Effects of nanosized TiCp on the microstructure evolution and tensile properties of an Al-Mg-Si alloy during cold rolling

Run Geng, Feng Qiu, Qinglong Zhao, Yu-Yang Gao, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2018

Effects of V and Co Element Addition on Microstructures and the Mechanical Properties of In Situ Biphasic Hybrid (TiCxNy–TiB2)/Ni Cermets

Feng Qiu, Xiang-Zheng Duan, Xiujuan Li, Hong‐Yu Yang, Yawei Wang

Materials

DOI

2018

Fabrication, microstructure refinement and strengthening mechanisms of nanosized SiCP/Al composites assisted ultrasonic vibration

Qiang Li, Feng Qiu, Bai–Xin Dong, Run Geng, Ming–ming Lv, Qinglong Zhao, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2018

Effects of Cr and Zr Addition on Microstructures, Compressive Properties, and Abrasive Wear Behaviors of In Situ TiB2/Cu Cermets

Feng Qiu, Xiang-Zheng Duan, Bai–Xin Dong, Hong‐Yu Yang, Jianbang Lu, Xiujuan Li

Materials

DOI

2018

Microstructures and Compressive Properties of Al Matrix Composites Reinforced with Bimodal Hybrid In-Situ Nano-/Micro-Sized TiC Particles

Feng Qiu, Haotian Tong, Yu-Yang Gao, Qian Zou, Bai–Xin Dong, Qiang Li, Jian-Ge Chu, Fang Chang, Shi–Li Shu, Qi‐Chuan Jiang

Materials

DOI

2018

The superior elevated-temperature mechanical properties of Al-Cu-Mg-Si composites reinforced with in situ hybrid-sized TiCx-TiB2 particles

Yu-Yang Gao, Bai–Xin Dong, Feng Qiu, Run Geng, Lei Wang, Qinglong Zhao, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2018

Enhanced strength and ductility at room and elevated temperatures of Al-Cu alloy matrix composites reinforced with bimodal-sized TiCp compared with monomodal–sized TiCp

Wei–Si Tian, Qinglong Zhao, Qingquan Zhang, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2018

Simultaneously increasing the high-temperature tensile strength and ductility of nano-sized TiCp reinforced Al-Cu matrix composites

Wei–Si Tian, Qinglong Zhao, Qingquan Zhang, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2018

Enhanced elevated-temperature mechanical properties of Al-Mn-Mg containing TiC nano-particles by pre-strain and concurrent precipitation

Qinglong Zhao, Huidi Zhang, Xiaoxian Zhang, Feng Qiu, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2017

The Relationship Between Oxidation and Thermal Fatigue of Martensitic Hot-Work Die Steels

Qi‐Chuan Jiang, Xu-Min Zhao, Feng Qiu, Tian-Ning Ma, Qinglong Zhao

Acta Metallurgica Sinica (English Letters)

DOI

2017

Improved ductility and toughness of an Al-Cu casting alloy by changing the geometrical morphology of dendritic grains

Qinglong Zhao, Qingquan Zhang, Wei Zhang, Feng Qiu, Qi‐Chuan Jiang

Materials Letters

DOI

2017

Strain-induced precipitation kinetics during non-isothermal annealing of Al-Mn alloys

Qinglong Zhao, Huidi Zhang, Feng Qiu, Qi‐Chuan Jiang

Journal of Alloys and Compounds

DOI

2017

Effects of TiB 2 /TiC x ratios on compression properties and abrasive wear resistance of in situ 50 vol.-% (TiB 2 –TiC x )/Al–Cu composites

Lei Wang, Feng Qiu, De-Long Yang, Jingyuan Liu, Fang Chang, Qi‐Chuan Jiang

Powder Metallurgy

DOI

2017

Mechanical properties and abrasive wear behaviors of in situ nano-TiC x /Al–Zn–Mg–Cu composites fabricated by combustion synthesis and hot press consolidation

Yu-Yang Gao, Feng Qiu, Shi–Li Shu, Lei Wang, Fang Chang, Wei Qiang Hu, Xue Ting Han, Qiang Li, Qi‐Chuan Jiang

Archives of Civil and Mechanical Engineering

DOI

2017

Microstructures and tensile properties of nano-sized SiC p /Al-Cu composites fabricated by semisolid stirring assisted with hot extrusion

Lei Wang, Feng Qiu, Qian Zou, De-Long Yang, Jian Tang, Yu-Yang Gao, Qiang Li, Xue Ting Han, Shi–Li Shu, Fang Chang, Qi‐Chuan Jiang

Materials Characterization

DOI

2017

Superior high creep resistance of in situ nano-sized TiCx/Al-Cu-Mg composite

Lei Wang, Feng Qiu, Qinglong Zhao, Min Zha, Qi‐Chuan Jiang

Scientific Reports

DOI

2017

The abrasive wear behavior of Al2014 composites reinforced with Ti5Si3-coated SiCP

De-Long Yang, Feng Qiu, Qinglong Zhao, Lei Wang, Qi‐Chuan Jiang

Tribology International

DOI

2017

Microstructures and Tensile Properties of Al–Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process

Feng Qiu, Xiang Gao, Jian Tang, Yu-Yang Gao, Shi–Li Shu, Xue Ting Han, Qiang Li, Qi–Chuan Jiang

Metals

DOI

2017

Simultaneously increasing the elevated-temperature tensile strength and plasticity of in situ nano-sized TiCx/Al-Cu-Mg composites

Lei Wang, Feng Qiu, Qinglong Zhao, Hui‐Yuan Wang, Qi‐Chuan Jiang

Materials Characterization

DOI

2017

Improved creep resistance of Al-Cu alloy matrix composite reinforced with bimodal-sized TiCp

Wei–Si Tian, Qinglong Zhao, Run Geng, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2017

The Dry Sliding Wear Properties of Nano-Sized TiCp/Al-Cu Composites at Elevated Temperatures

Wei–Si Tian, Qinglong Zhao, Chuan-Jiang Zhao, Feng Qiu, Qi‐Chuan Jiang

Materials

DOI

2017

Superior creep resistance of 0.3 wt% nano-sized TiCp/Al-Cu composite

Wei–Si Tian, Qinglong Zhao, Qingquan Zhang, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2017

Morphology Evolution on the Fracture Surface and Fracture Mechanisms of Multiphase Nanostructured ZrCu-Base Alloys

Feng Qiu, Lin Zhu, Qian Zou, Lei Wang, Xue Ting Han, Qiang Li, Qi‐Chuan Jiang

Materials

DOI

2017

The microstructure and tensile property for Al2014 composites reinforced with Ti5Si3-coated SiCP

De-Long Yang, Feng Qiu, Qinglong Zhao, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2016

SiCP表面镀Ti改性对SiCP/Al2014复合材料组织及力学性能的影响

雷宗坤，赵卫星，于成龙，赵洪刚，舒世立，邱丰

《复合材料学报》

2016

Excellent compressive strength and ductility of Ti5Si3–coated SiCP/Al2014 composites

De-Long Yang, Feng Qiu, Qinglong Zhao, Qi‐Chuan Jiang

Journal of Alloys and Compounds

DOI

2016

Effects of different carbon sources on the compressive properties of in situ high-volume-fraction TiC x /2009Al composites

L. Wang, Feng Qiu, Shi–Li Shu, Qinglong Zhao, Qi‐Chuan Jiang

Powder Metallurgy

DOI

2016

Effect of C/Ti ratio on the compressive properties and wear properties of the 50 vol.-% submicron-sized TiC x /2014Al composites fabricated by combustion synthesis and hot press consolidation

Feng Qiu, Yuyang Gao, J.-Y. Liu, Shi–Li Shu, Q. Zou, T.-Z. Zhang, Qing Jiang

Powder Metallurgy

DOI

2016

Effects of ternary elements on the ductility of TiAl

Shi–Li Shu, Cunzhu Tong, Feng Qiu, Q. Zou, Qing Jiang

Canadian Metallurgical Quarterly

DOI

2016

Fabrication of TiCx-TiB2/Al Composites for Application as a Heat Sink

Shi–Li Shu, Hong‐Yu Yang, Cunzhu Tong, Feng Qiu

Materials

DOI

2016

The interfacial structure and mechanical properties of Ti5Si3-coated SiCP/Al2014 composites fabricated by powder metallurgy with hot pressing

De-Long Yang, Feng Qiu, Zong-Kun Lei, Qinglong Zhao, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2016

Superior tensile properties of in situ nano-sized TiCp/Al-Cu composites fabricated by reaction in melt method

Wei–Si Tian, Dongshuai Zhou, Feng Qiu, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2015

Effect of Mn, Fe and Co on the compression strength and ductility of in situ nano-sized TiB2/TiAl composites

Shi–Li Shu, Cunzhu Tong, Feng Qiu, Qi‐Chuan Jiang

SpringerPlus

DOI

2015

Effect of Ceramic Content on the Compression Properties of TiB2-Ti2AlC/TiAl Composites

Shi–Li Shu, Cunzhu Tong, Feng Qiu, Qi‐Chuan Jiang

Metals

DOI

2015

Tensile properties and work-hardening behaviours of Al–Cu alloys modified by Al84Ni10La6metallic glass

Zhihao Bai, Feng Qiu, Yang He, Hailong Zhao, Qi–Chuan Jiang

International Journal of Cast Metals Research

DOI

2015

Grain refinement behavior of Al–Cu alloys inoculated by various metallic glasses

Zhihao Bai, Feng Qiu, Lian-Yi Shan, Ying‐Ying Liu, Yue Han, Qi–Chuan Jiang

Materials Chemistry and Physics

DOI

2015

Nano-SiC p /Al2014 composites with high strength and good ductility

Longjiang Zhang, Feng Qiu, Jinguo Wang, Qi–Chuan Jiang

Science and Engineering of Composite Materials

DOI

2015

Effects of Ti-coating layer on the distribution of SiCP in the SiCP/2014Al composites

De-Long Yang, Feng Qiu, Weixing Zhao, Ping Shen, Hui‐Yuan Wang, Qi‐Chuan Jiang

Materials & Design

DOI

2015

Effect of Al addition on the microstructures and compression properties of (TiCxNy–TiB2)/Ni composites fabricated by combustion synthesis and hot press

Feng Qiu, Rui Lin Zuo, Shi–Li Shu, Yawei Wang, Qi‐Chuan Jiang

Powder Technology

DOI

2015

The superior ductility of fine SiC p /Al2014 composites after extrusion

Long-Jiang Zhang, Feng Qiu, Jinguo Wang, Qi–Chuan Jiang

Science and Engineering of Composite Materials

DOI

2015

Microstructure and compression properties ofin situdual phase nanosized (TiB2–Ti5Si3)/TiAl matrix composites fabricated by combustion synthesis and hot press consolidation

Feng Qiu, Yi He, Lijuan Zhu, Shi–Li Shu, Wei Qiang Hu, Conghong Zhan, Qing Jiang

Powder Metallurgy

DOI

2015

Generalized-stacking-fault energy and twin-boundary energy of hexagonal close-packed Au: A first-principles calculation

Cheng Wang, Hui‐Yuan Wang, Tianlong Huang, Xue-Na Xue, Feng Qiu, Qi–Chuan Jiang

Scientific Reports

DOI

2015

Deformation induced martensitic transformation and strong workhardening behaviours in nanostructured Zr–Cu–Al alloys

Feng Qiu, Lian-Yi Shan, J. -M. Bao, Jeong-Keun Chu, Yang He, Qing Jiang

Materials Science and Technology

DOI

2015

Microstructure and tensile properties of in situ synthesized nano-sized TiCx/2009Al composites

Lei Wang, Feng Qiu, Jing-Yuan Liu, Hui‐Yuan Wang, Jinguo Wang, Lin Zhu, Qi‐Chuan Jiang

Materials & Design (1980-2015)

DOI

2015

Study of effect of Zr addition on the microstructures and mechanical properties of (TiCx–TiB2)/Cu composites by combustion synthesis and hot press consolidation in the Cu–Ti–B4C–Zr system

Feng Qiu, Jian-Ge Chu, Wei Qiang Hu, Jianbang Lu, Xiaodong Li, Yue Han, Qi‐Chuan Jiang

Materials Research Bulletin

DOI

2015

Simultaneously increasing strength and ductility of the Al–Cu alloys inoculated by Zr-based metallic glass

Zhihao Bai, Feng Qiu, Jiaxing Xue, Bingqi Zhang, Qi–Chuan Jiang

Materials Characterization

DOI

2015

A Novel Approach of Using Ground CNTs as the Carbon Source to Fabricate Uniformly Distributed Nano-Sized TiCx/2009Al Composites

Lei Wang, Feng Qiu, Licheng Ouyang, Hui‐Yuan Wang, Min Zha, Shi–Li Shu, Qinglong Zhao, Qi‐Chuan Jiang

Materials

DOI

2015

Superior strength and ductility of the Al–Cu alloys inoculated by Zr-based metallic glass at elevated temperatures

Zhihao Bai, Feng Qiu, Ying‐Ying Liu, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2015

Microstructures and mechanical properties of the Al2014 composites reinforced with bimodal sized SiC particles

Longjiang Zhang, Feng Qiu, Jinguo Wang, Hui‐Yuan Wang, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2015

High strength and good ductility at elevated temperature of nano-SiCp/Al2014 composites fabricated by semi-solid stir casting combined with hot extrusion

Longjiang Zhang, Feng Qiu, Jinguo Wang, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2014

Microstructure evolution and mechanical properties of Al–Cu alloys inoculated by FeBSi metallic glass

Zhihao Bai, Feng Qiu, Jiaxuan Chi, Tao Zhang, Qi–Chuan Jiang

Materials & Design (1980-2015)

DOI

2014

A New Approach to Refine Grains in Al Alloys

Zhihao Bai, Feng Qiu, Tao Zhang, Qi‐Chuan Jiang

Advanced Engineering Materials

DOI

2014

Manufacture of Nano-Sized Particle-Reinforced Metal Matrix Composites: A Review

Dongshuai Zhou, Feng Qiu, Hui‐Yuan Wang, Qi‐Chuan Jiang

Acta Metallurgica Sinica (English Letters)

DOI

2014

Effect of Cr Content on the Compression Properties and Abrasive Wear Behavior of the High-Volume Fraction (TiC–TiB2)/Cu Composites

Feng Qiu, Yue Han, Ai Chao Cheng, Jianbang Lu, Qi‐Chuan Jiang

Acta Metallurgica Sinica (English Letters)

DOI

2014

Effects of Fe, Co and Ni elements on the ductility of TiAl alloy

Shi–Li Shu, Feng Qiu, Cunzhu Tong, Xiaonan Shan, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2014

Age Hardening and Mechanical Properties of Cast AlCu Alloy Modified by La and Pr

Zhihao Bai, Feng Qiu, Ying‐Ying Liu, Wei Bing Zhou, Qi–Chuan Jiang

Advanced Engineering Materials

DOI

2014

Effects of nano-TiCp on the microstructures and tensile properties of TiCp/Al–Cu composites

Dong Zhou, Jian Tang, Feng Qiu, Jin Guo Wang, Qi Jiang

Materials Characterization

DOI

2014

Effects of RExOy addition on corrosion behavior of the Al–Cu alloys in 3.5wt.% NaCl solution and pH=4 acid solution

Zhihao Bai, Yumei Xia, Feng Qiu, Yingying Liu, Wei Hu, Qi–Chuan Jiang

Applied Surface Science

DOI

2014

Characteristics of precursor film in the wetting of Zr-based alloys on ZrC substrate at 1253K

Qiaoli Lin, Feng Qiu, Ran Sui

Thin Solid Films

DOI

2014

Effects of reinforcement surface modification on the microstructures and tensile properties of SiCp/Al2014 composites

Longjiang Zhang, De-Long Yang, Feng Qiu, Jinguo Wang, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2014

The nano-sized TiC particle reinforced Al–Cu matrix composite with superior tensile ductility

Dongshuai Zhou, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2014

Effects of TiB2 content and alloy elements (Mg, Mo, V) on the compression properties of high-volume-fraction TiB2/Al composites

Longjiang Zhang, Qianqian Xuan, Jinguo Wang, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2013

Age hardening and creep resistance of cast Al–Cu alloy modified by praseodymium

Zhihao Bai, Feng Qiu, Xiaoxue Wu, Ying‐Ying Liu, Qi–Chuan Jiang

Materials Characterization

DOI

2013

Effect of strain rate on the compression behavior of TiAl and TiAl–2Mn alloys fabricated by combustion synthesis and hot press consolidation

Shi–Li Shu, Feng Qiu, Bin Xing, Shenbao Jin, Jinguo Wang, Qi–Chuan Jiang

Intermetallics

DOI

2013

Effect of Lanthanum on Grain Refinement of Casting Aluminum-Copper Alloy

Dongming Yao, Feng Qiu, Qing Jiang, Y. Li, L. Arnberg

International Journal of Metalcasting

DOI

2013

Simultaneously increasing the strength and ductility of nano-sized TiN particle reinforced Al–Cu matrix composites

Dongshuai Zhou, Feng Qiu, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2013

Effect of oxygen content on the microstructure, compression properties and work-hardening behaviors of ZrCuAlNi glassy composites

Feng Qiu, Ying‐Ying Liu, Rui‐Fen Guo, Zhihao Bai, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2012

液固相变形核率转变的物理模拟

陈磊，王猛，周鹏，邱丰，黄卫东

《铸造技术》

2012

Effect of stoichiometry on the surface energies of {100} and {111} and the crystal shape of TiCx and TiNx

Dongshuai Zhou, Shenbao Jin, Yanjun Li, Feng Qiu, Fan Deng, Jinguo Wang, Qi–Chuan Jiang

CrystEngComm

DOI

2012

Effect of B4C size on the fabrication and compression properties of in situ TiB2–Ti2AlC/TiAl composites

Shi–Li Shu, Feng Qiu, Yanyan Lin, Yawei Wang, Jinguo Wang, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2012

Effect of W content on the compression properties and abrasive wear behavior of the (TiB2–TiCxNy)/(Ni+W) composites

Yawei Wang, Shi–Li Shu, Feng Qiu, Dongshuai Zhou, Jinguo Wang, Qi‐Chuan Jiang

Materials & Design (1980-2015)

DOI

2012

Effects of La on the age hardening behavior and precipitation kinetics in the cast Al–Cu alloy

Dongming Yao, Zhihao Bai, Feng Qiu, Yanjun Li, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2012

Study of effect of Mn addition on the mechanical properties of Ti2AlC/TiAl composites through first principles study and experimental investigation

Shi–Li Shu, Feng Qiu, Bin Xing, Shenbao Jin, Yawei Wang, Qi–Chuan Jiang

Intermetallics

DOI

2012

Compression properties and abrasive wear behavior of high volume fraction TiCx–TiB2/Cu composites fabricated by combustion synthesis and hot press consolidation

Jianbang Lu, Shi–Li Shu, Feng Qiu, Yawei Wang, Qi‐Chuan Jiang

Materials & Design (1980-2015)

DOI

2012

Effect of Ni content on the compression properties and abrasive wear behavior of the (TiB2–TiCxNy)/Ni composites

Yawei Wang, Feng Qiu, Shi–Li Shu, Jianbang Lu, Qi–Chuan Jiang

International Journal of Refractory Metals and Hard Materials

DOI

2012

Compression properties and work-hardening effect of the NiAl-matrix composite with TaB2 and TaB

Hailong Zhao, Feng Qiu, Shenbao Jin, Qing Jiang

Intermetallics

DOI

2012

Comparative study of the compression properties of TiAl matrix composites reinforced with nano-TiB2 and nano-Ti5Si3 particles

Shi–Li Shu, Bin Xing, Feng Qiu, Shenbao Jin, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2012

Effects of multi-modification of rare earth oxides PrxOy and LaxOy on microstructure and tensile properties of casting Al–Cu alloy

Yumei Xia, Zhihao Bai, Feng Qiu, Shenbao Jin, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2012

Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction

Shi–Li Shu, Feng Qiu, Sijie Lü, Shenbao Jin, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2012

Different strain-rate dependent compressive properties and work-hardening capacities of 50 vol% TiC /Al and TiB2/Al composites

Qianqian Xuan, Shi–Li Shu, Feng Qiu, Shenbao Jin, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2011

Enhanced ductility in a Zr65Cu15Al10Ni10 bulk metallic glass by nanocrystallization during compression

Feng Qiu, Ping Shen, Tao Liu, Qi–Chuan Jiang

Materials & Design (1980-2015)

DOI

2011

Effects of Ni addition on the microstructure and compressive deformation behavior in Zr–Cu–Ni martensitic alloys

Feng Qiu, Ping Shen, Chang Liu, Qi–Chuan Jiang

Materials & Design (1980-2015)

DOI

2011

Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti–Al–Nb–C system

Shi–Li Shu, Feng Qiu, Shenbao Jin, Jianbang Lu, Qi–Chuan Jiang

Materials & Design (1980-2015)

DOI

2011

High work-hardening effect of the pure NiAl intermetallic compound fabricated by the combustion synthesis and hot pressing technique

Hailong Zhao, Feng Qiu, Shenbao Jin, Qing Jiang

Materials Letters

DOI

2011

Temperature Dependence of the Wettability between Glass‐Forming Alloy Zr 55 Cu 30 Al 10 Ni 5 and Polycrystalline ZrO 2

Ping Shen, Xiaohong Zheng, Feng Qiu, Qi–Chuan Jiang, Huijie Liu, Zhen Liu

Journal of the American Ceramic Society

DOI

2011

Effect of Cr on the wetting in Cu/graphite system

Longlong Yang, Ping Shen, Qiaoli Lin, Feng Qiu, Qi–Chuan Jiang

Applied Surface Science

DOI

2011

Effect of different strain rates on compression property and work-hardening behavior for the NiAl-matrix composite with 1.7wt.% NbB2 and NbxC

H.L. Zhao, Feng Qiu, Shenbao Jin, Qing Jiang

Materials Science and Engineering A

DOI

2010

High room-temperature plastic and work-hardening effect of the NiAl-matrix composites reinforced by particulates

Hailong Zhao, Feng Qiu, Shenbao Jin, Qi–Chuan Jiang

Intermetallics

DOI

2010

Warping of triple line in the wetting of B 4 C by a Cu‐1 at.% Cr alloy

Qiaoli Lin, Ping Shen, Longlong Yang, Feng Qiu, Qi–Chuan Jiang

Surface and Interface Analysis

DOI

2010

Wetting of porous graphite by Cu–Ti alloys at 1373 K

Longlong Yang, Ping Shen, Qiaoli Lin, Feng Qiu, Qi‐Chuan Jiang

Materials Chemistry and Physics

DOI

2010

High volume fraction TiCx/Al composites with good comprehensive performance fabricated by combustion synthesis and hot press consolidation

Shi–Li Shu, Jianbang Lu, Feng Qiu, Qianqian Xuan, Qi‐Chuan Jiang

Materials Science and Engineering A

DOI

2010

Effects of La addition on the elevated temperature properties of the casting Al–Cu alloy

Dongming Yao, Yumei Xia, Feng Qiu, Qi–Chuan Jiang

Materials Science and Engineering A

DOI

2010

Effects of alloy elements (Mg, Zn, Sn) on the microstructures and compression properties of high-volume-fraction TiCx/Al composites

Shi–Li Shu, Jianbang Lu, Feng Qiu, Qianqian Xuan, Qi‐Chuan Jiang

Scripta Materialia

DOI

2009

Electronic structure and phase stability during martensitic transformation in Al-doped ZrCu intermetallics

Feng Qiu, Ping Shen, Tao Liu, Qiaoli Lin, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2009

Wettability and reactivity between B4C and molten Zr55Cu30Al10Ni5 metallic glass alloy

Xiaohong Zheng, Ping Shen, Xianhe Han, Qiaoli Lin, Feng Qiu, Yefei Zhang, Qi–Chuan Jiang

Materials Chemistry and Physics

DOI

2009

Microstructures and Mechanical Properties of ZrC Reinforced (Zr‐Ti)‐Al‐Ni‐Cu Glassy Composites by an In Situ Reaction

Tao Liu, Ping Shen, Feng Qiu, Tao Zhang, Qi–Chuan Jiang

Advanced Engineering Materials

DOI

2009

High creep resistance behavior of the casting Al–Cu alloy modified by La

Dongming Yao, Wengui Zhao, Hailong Zhao, Feng Qiu, Qi‐Chuan Jiang

Scripta Materialia

DOI

2009

Wetting of polycrystalline B4C by molten Al at 1173–1473K

Qiaoli Lin, Ping Shen, Feng Qiu, Dan Zhang, Qi‐Chuan Jiang

Scripta Materialia

DOI

2008

The correlation between the formation of different martensitic structures and the cooling rates in ZrCuAlNiO alloy during solidification

Feng Qiu, Ping Shen, Tao Liu, Dan Zhang, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2008

Strong work-hardening effect in a multiphase ZrCuAlNiO alloy

Feng Qiu, Ping Shen, Zhonghao Jiang, Tao Liu, Qi–Chuan Jiang

Applied Physics Letters

DOI

2008

Formation of a Multiphase Gradient Structure in a Zr–Cu–Ni–Al–O Alloy

Feng Qiu, Tianshu Liu, Zhonghao Jiang, Ping Shen, Qing Jiang

Advanced Engineering Materials

DOI

2008

Influence of Al content on the microstructure and mechanical property of the (Zr2Cu)100−xAlx alloys

Feng Qiu, Hui‐Yuan Wang, Tao Liu, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2008

Effect of Tempering on Microstructure and Mechanical Properties in a Multiphase ZrCuAlNiO Alloy

Feng Qiu, Ping Shen, Tao Liu, Qi–Chuan Jiang

ISIJ International

DOI

2008

Synthesis and mechanical properties of TiC-reinforced Cu-based bulk metallic glass composites

Tao Liu, Ping Shen, Feng Qiu, Zhongfa Yin, Qiaoli Lin, Qi–Chuan Jiang, Tao Zhang

Scripta Materialia

DOI

2006

Synthesis of dense ceramic particulate reinforced composites from Ni–Ti–C, Ni–Ti–B, Ni–Ti–B4C and Ni–Ti–C–B systems via the SHS reaction, arc melting and suction casting

Lijun Huang, H.Y. Wang, Feng Qiu, Qi Jiang

Materials Science and Engineering A

DOI

2005

Cooling rate and microstructure of rapidly solidified Al–20wt.% Si alloy

Chao Xu, Hai-Hua Wang, Feng Qiu, Yafeng Yang, Qing Jiang

Materials Science and Engineering A

DOI

精选作品

期刊论文

Microstructural manipulation and wear resistance optimization of gray cast iron via nano-sized TiC–TiB2 ceramic particles

Trace nanoparticle-mediated modification of the Fe-rich phases and enhancement of mechanical properties in Al-Mg-Si-0.6Fe alloy

Laser additive manufacturing of particle reinforced aluminum alloys

Enhanced short-term creep resistance of hot-work die steel via nanoparticle-assisted through-process microstructural regulation

Development of nanoparticle-reinforced highly alloyed Al–Zn–Mg–Cu alloy with ultrahigh strength

Research Progress on Microstructure Control and Strengthening Mechanisms of Aluminum Alloys for New Energy Vehicles

Sustaining excellent strength and toughness in high-Cr die steel via trace nano-ceramic particle modification under cyclic thermal exposure

Microstructure tailoring with minor nanoparticle addition for superior fatigue resistance in aluminum alloys

A review of corrosion mechanisms, passive film dynamics, and material design strategies for stainless steels in seawater environments

Advances in particle-reinforced high-entropy alloys: Preparation, particle characterization, properties, and prospects

Research progress on process, microstructure and property regulation of additive manufacturing tool steels

Strengthening mechanisms of molybdenum in die steels at high temperature

Tailoring mechanical properties and corrosion resistance of (TiC–TiB2)/Al–Zn–Mg–Cu composites via high-pressure torsion

Grain refinement and stability in rare-earth magnesium alloys

Nanoparticle-enabled superplasticity in extruded AZ91 magnesium alloy with elongation exceeding 600%

Research progress on rare earth-containing heat-resistant magnesium alloys

Influence mechanisms of TiC-TiB2 particles on solid-liquid and solid-solid phase transformations in ZL205A

Study on microstructure and high-temperature mechanical behavior of nano-TiC/TiB2 duplex-reinforced nickel-based alloys

Microstructure and compression deformation behaviors of TiAl composites reinforced by in-Situ Nano-Ti2AlC and Mn3AlC

Superplastic magnesium alloys: A critical review of processing, deformation mechanisms, and particulate reinforcement strategies

Hazards and optimal utilization of iron in low-carbon recycled aluminum alloys

Research progress on the formation, regulation, and failure mechanisms of the γ′ phase in nickel-based superalloy

Research progress on strengthening mechanisms and application of high-performance cold-work tool and die steels

Synergistic enhancement of strength and ductility of Ti2AlC/TiAl through Mn solid solution and interface manipulation

Microstructure and high-temperature creep behavior of nano-strengthened superalloys

新时代科教融汇背景下材料科学基础课程教学改革探索

Review on additive manufacturing lightweight metal matrix composites: From properties to functionalities

Multiscale orchestration of microstructures in duplex stainless steel via introduction of trace nanoceramics

The Microstructure Regulation Mechanism and Future Application of Aluminum Alloys Manipulated by Nanocrystalline Structures Formed by In Situ Amorphous Crystallization

Rare Earth Elements in Heat-Resistant Magnesium Alloys: Mechanisms, Performance, and Design Strategies

Achieving high oxidation and hot-cold alternating fatigue resistance die steels via synergistic manipulation of Cr and nanoparticles

The development of high thermal conductivity die steel with excellent performance: Integrating alloy design, heat treatment, and ceramic particle reinforcement

Enhanced high-temperature tensile performance and strengthening mechanism of Al-13Si alloys reinforced by trace micron/nano hybrid-sized TiB2

Opening the future of lightweight: Research progress in additive manufacturing of TiAl alloys

Enhancing high-temperature performance of Al Cu alloys via nanoceramic particle-induced grain boundary stabilization and precipitate manipulation

Thermal fatigue failure mechanisms and enhancement strategies of die steel

Additive manufacturing of high-strength and crack-sensitive aluminum alloy using novel in-situ ceramics reinforced powder

Development and future of TiAl composites – microstructural characteristics and high-temperature service performance

In depth analysis of microstructure and mechanical properties of joints in thick plate friction stir welding of high–strength Al–Zn–Mg–Cu alloy

Microstructure, mechanical properties and corrosion behavior of biodegradable high-purity magnesium via extrusion-shear process: effect of extrusion temperature

Mechanisms of Ti, Nb, and Zr in Microstructure Evolution and Mechanical Enhancement of CNTs/Al Composites

The role of in-situ dual-phase NbB2 and NbC particles on the microstructure and toughening mechanisms of NiAl composites

Recent advances on magnesium alloys for automotive cabin components: Materials, applications, and challenges

The development of high-strength flame-retardant magnesium alloys

Excellent high-temperature friction and wear resistance of high–Cr die steels by trace in–situ nano-ceramics

Competitive and collaborative relationship between Al–3P and TiB2 nanoparticles in the microstructure manipulation of eutectic Al–Si alloys

Study on the microstructure and mechanical properties of selective laser melted TiB/Ti6Al4V composites incorporating trace amounts of TiB2 nanoparticles

材料成型及控制工程专业实践教学改革探索——以“生产实习”课程为例

Tailored porosity in additive manufacturing of 7075 aluminum alloy for crack suppression and high strength

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology

Effect of synergistic microalloying on the microstructural optimization of Mo/NiAl alloy with excellent mechanical properties under rapid non-equilibrium solidification

Nano-Enhanced Phase Reinforced Magnesium Matrix Composites: A Review of the Matrix, Reinforcement, Interface Design, Properties and Potential Applications

Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles

Thermal fatigue performance enhancement of new high-Cr martensitic die steels based on overall microstructure manipulation by trace TiC–TiB2 nanoparticles

Excellent strength-toughness combination of NiAl–30Cr composites with novel in situ composite microstructure containing NiAl matrix and Cr single-phase

Preparation of iron-based composites reinforced with submicron/nano-sized TiC ceramic particles by in-situ reaction in melts and one-step integrated hot pressing densification

Microstructure and mechanical properties of austenitic stainless steels manipulated by trace TiC–TiB2 nanoparticles

Dissimilar joining of aluminum alloy and low-alloy carbon steel by resistance spot welding

Thin-walled and large-sized magnesium alloy die castings for passenger car cockpit: Application, materials, and manufacture

Research progress, application and development of high performance 6000 series aluminum alloys for new energy vehicles

Sub-rapid solidification microstructure characteristics and control mechanisms of twin-roll cast aluminum alloys: A review

A Novel Design to Enhance the Tribological Properties of High‐Cr Hot Work Die Steel via Trace TiC Ceramic Nanoparticles

Recent progress of Al–Mg alloys: Forming and preparation process, microstructure manipulation and application

Preparation, reaction mechanism and microwave-absorbing application of functional transition metal carbide/nitride ceramic materials

Advance on rock-breaking cutter steels: A review of characteristics, failure modes, molding processes and strengthening technology

Effects and mechanisms of rare earth and calcium on the flame retardancy of magnesium alloys

Insights into the microstructure evolution and wear resistance of Nano-TiC particles reinforced High-Cr hot work die steel

Microstructure, solidification defects and mechanical properties of high-modulus and high-strength SiC/AlSi10Mg composites fabricated by selective laser melting

Research progress on nanoparticles reinforced magnesium alloys

Effects of various proportions TiB2p-TiCp reinforced Al–Cu–Mg composites in high-temperature mechanical properties and sliding wear behaviors

Review on manufacturability and strengthening mechanisms of particulate reinforced Mg composites

Dual-gradient ceramic/aluminum composite structure fabricated by arc additive manufacturing with co-conveying of wire and powder

The role of Ti in the phase transformation and microstructure manipulation of ZrCu alloys with excellent mechanical properties

Improved Creep Property of Super304H Steel with Minute Amounts of TiC/TiB2 Nano-Particles at 600 °C and 330 MPa

Metallurgy and Solidification Microstructure Control of Fusion-Based Additive Manufacturing Fabricated Metallic Alloys: A Review

材料成型及控制工程专业“生产实习”课程思政教学探索

Friction stir welding of high strength and toughness cast Al-Si7-Cu4-Mg0.3 alloys manipulated by in-situ nanocrystals