朱苗勇

期刊论文

1. 郑淑国，金立斌，朱苗勇（2026）. Fe-C-Mn-Al中锰钢微观偏析及析出行为研究进展. 《鞍钢技术》.
2. 杜国庆，罗森，王卫领，朱苗勇，张学民，赵立峰，刘文凭（2026）. 基于机器视觉+AI的连铸坯低倍数智化检测平台. 《材料与冶金学报》.DOI
3. 朱苗勇，王卫领（2026）. 连铸凝固过程溶质偏析形成机理及其控制研究进展. 《金属学报》.
4. 代兴意，梁博淳，祭程，朱苗勇（2026）. 动态冷却速率驱动的连铸坯热物性参数预测模型. 《钢铁研究学报》.DOI
5. Zeyu Wang, W. Lou, Miao-Yong Zhu (2026). Simulation study on multiphase transient thermal behavior in a standing ladle based on the volume of fluid-discrete ordinates coupled model. Applied Thermal Engineering.DOI
6. Peng Liu, Zhaozhen Cai, Miaoyong Zhu (2026). Effect of Lanthanum on Homogeneity of Solidification Microstructure in Sulfur-Containing Peritectic Steel. Metallurgical and Materials Transactions B.DOI
7. Wenyue Ba, Weiling Wang, Liang Liu, Xiaoyu Xie, Fengchuan Wang, Miaoyong Zhu (2026). Investigation of Non-uniform Heat Transfer in Curved Mold Copper Tube in Continuous Casting of Alloyed Steel Bloom. Metallurgical and Materials Transactions B.DOI
8. Guoqing Du, Sen Luo, Weiling Wang, Miaoyong Zhu (2026). Pixel-Level Segmentation and Representative Quantitative Characterization of Central Segregation in Continuously Cast Slabs Based on Acid-Etched Macrostructure Images and an Improved U-Net Model. Metallurgical and Materials Transactions B.DOI
9. Kangkang Li, Sen Luo, Weiling Wang, Miaoyong Zhu (2026). Numerical Investigation on Improvement of Solidification Structure and Macrosegregation in Wide-Thick Slab with Different Mechanical Reduction Roller Shapes via Three-Phase Solidification Model. Metallurgical and Materials Transactions B.DOI
10. Junlong Ju, Zhida Zhang, Hai Chang, Cheng Ji, Miaoyong Zhu (2026). Embedded Machine Learning-Assisted Inverse Calibration of Crystal Plasticity and Cohesive Zone Constitutive Parameters for High-Temperature Equiaxed Austenite. Metallurgical and Materials Transactions B.DOI
11. W.J. Wang, Chenxu Zhao, Hang Zhang, Binzhou Li, Zhaozhen Cai, Miaoyong Zhu (2026). Friction and Wear Properties of Ni–Co and Ni–Co–Al2O3 Coatings on Mold Copper Plate Under Temperature and Oscillation Conditions of Continuous Casting. Metallurgical and Materials Transactions B.DOI
12. Zhida Zhang, Junlong Ju, Cheng Ji, Miaoyong Zhu (2026). Cracking induced by second phases in a continuously cast micro-alloyed steel: Experiments and crystal plasticity modeling. Journal of Materials Research and Technology.DOI
13. Peng Liu, Zhaozhen Cai, Miaoyong Zhu (2026). Effect of Sulfur Content on the Hot Ductility of Sulfur-Containing Steel. Metallurgical and Materials Transactions B.DOI
14. Gaolin Lv, Sen Luo, Jian Gong, Youjin Ni, Weiling Wang, Miaoyong Zhu (2026). Effect of Mold Electromagnetic Stirring on the Subsurface Quality of Continuously Cast IF Steel Slabs. Metallurgical and Materials Transactions B.DOI
15. Junlong Ju, Zhida Zhang, Cheng Ji, Miaoyong Zhu (2026). Damage localization and connectivity in cavity-bearing intergranular film networks under prescribed segregation-induced weakening. Mechanics of Materials.DOI
16. Junlong Ju, Kaixiang Li, Dexiang Liu, Hai Chang, Cheng Ji, Miaoyong Zhu (2026). Strain-Rate-Dependent Total Inelastic Strain Damage Framework for Predicting Bulging-Induced Intermediate Cracks in Continuous Casting Blooms. Metallurgical and Materials Transactions B.DOI
17. Junlong Ju, Dexiang Liu, Cheng Ji, Miaoyong Zhu (2026). Mold-Exit Narrow-Face Profile Design for Compensating Billet Broadening During End-of-Solidification Reduction. Metallurgical and Materials Transactions B.DOI
18. Zhenyu Niu, Hongjun Zhang, Jingqi Chen, Zhenhua Bai, Ce Ji, Dong Xu, Zhaozhen Cai, Miaoyong Zhu (2026). Mechanistic study of unsteady bulging formation in slab continuous casting based on fluid–structure interaction. Journal of Materials Research and Technology.DOI
19. Haoyu Lu, Sen Luo, Wei Wang, Miaoyong Zhu (2026). A Grain Growth Prediction Model Coupled with Ti(C, N) Precipitation for Continuously Cast Ti Micro-alloyed Steel Slab. Metallurgical and Materials Transactions B.DOI
20. S Wang, Decheng Zhao, Yan Lu, Zhiyin Deng, Miaoyong Zhu (2026). Interaction Behaviors of MgO Refractory with CaO–SiO 2 –FeO x –MgO–MnO–Al 2 O 3 –P 2 O 5 Slags. steel research international.DOI
21. Zhida Zhang, Junlong Ju, Cheng Ji, Hai Chang, Miaoyong Zhu (2026). Corner cracking criterion in slab continuous casting: A cross-scale framework from laboratory calibration to industrial prediction. Journal of Manufacturing Processes.DOI
22. Mingming Xie, Shuguo Zheng, Miaoyong Zhu (2026). Numerical Simulation on Heat Transfer Behaviors of Single‐Flow Post‐Combustion Oxygen Lance with Water Cooling. steel research international.DOI
23. Hongguang Li, Yuwei Yang, Mingli Xu, Sen Luo, Miaoyong Zhu, Shubiao Yin (2026). Effect of electromagnetic stirring on macro-segregation in continuous casting blooms of heavy-rail steel U75V. Journal of Materials Research and Technology.DOI
24. Shuguo Zheng, Mingming Xie, Zhenbo Cai, Chao Liu, Miaoyong Zhu (2026). Flow and Dephosphorization Behavior During the Postblowing Stirring Stage in a 250 t Converter With a Single‐Flow Postcombustion Oxygen Lance. steel research international.DOI
25. LIBIN JIN, Shuguo Zheng, Miaoyong Zhu (2026). A Novel Approach for Interpreting the Solidification Behavior of Fe–Mn–Al–C Medium Mn Peritectic Steels by DICTRA Simulation Combining DSC and CSLM. Metallurgical and Materials Transactions B.DOI
26. Xiao-hua Wang, W.P. Tong, Gaolin Lv, Yelian Zhou, Sen Luo, Weiling Wang, Miaoyong Zhu (2026). Effect of Electromagnetic Braking on Surface Hooks and Inclusions in Low‐Carbon Steel Continuous Casting Slabs. steel research international.DOI
27. Guangyu Hao, Zhiyin Deng, Miaoyong Zhu (2026). In-situ observation of the dissolution of CaTiO3 inclusion in CaO-SiO2-MgO-Al2O3-TiO2 slags. Ceramics International.DOI
28. Junlong Ju, Zhida Zhang, Cheng Ji, Xianjin Sun, Xueqian Cao, Miaoyong Zhu (2026). Multi-scale modeling and machine-learning-assisted optimization of convex-roll end-of-solidification reduction in ultra-thick continuous-casting steel slabs. Journal of Materials Research and Technology.DOI
29. Junlong Ju, Zhida Zhang, Cheng Ji, Miaoyong Zhu (2026). Intermediate crack initiation during liquid core reduction of regular slabs: ERLS-based 3D simulation with calibrated normalized Cockcroft–Latham criterion. International Journal of Minerals Metallurgy and Materials.DOI
30. Kangkang Li, Sen Luo, Weiling Wang, Miaoyong Zhu (2026). Effect of Strand Electromagnetic Stirring on Solidification Structure and Segregation of Wide-Thick Slab with Grain Sedimentation. Metallurgical and Materials Transactions B.DOI
31. Zhenzhuo Zhang, Zhiyin Deng, Zhigang Liang, Miaoyong Zhu (2026). Effect of Deoxidation Method on Nonmetallic Inclusions in Heavy Rail Steel. Metallurgical and Materials Transactions B.DOI
32. Jiyin Jiang, Zhaozhen Cai, Miaoyong Zhu, Jiazhi An (2026). High-Temperature Damage Mechanism of Ni–Co Coatings on the Narrow Face Copper Plates of Slab Mold with High-Speed Continuous Casting. Metallurgical and Materials Transactions A.DOI
33. Jiyin Jiang, Zhaozhen Cai, Miaoyong Zhu (2026). Synergistic Effects of Nano-ZrO2 and AEO-7 on the Microstructure and Properties of Electrodeposited Ni–Co Composite Coatings for High-Speed Continuous Casting Molds. Metallurgical and Materials Transactions B.DOI
34. Yuwei Yang, Sen Luo, Weiling Wang, Miaoyong Zhu (2026). Macrosegregation and Solidification Structure in Continuously Cast Round Bloom with Multi-stage and Multi-mode Electromagnetic Stirring: A Numerical Study. Metallurgical and Materials Transactions B.DOI
35. Yi Xiao, Zhaozhen Cai, Miaoyong Zhu (2026). Cross-scale synergistic protection of Q345NH weathering steel under freeze-thaw environments via La-Ce composite microalloying. Corrosion Science.DOI
36. Yinxing Guo, Weiling Wang, Sen Luo, 岳莹莹, Miaoyong Zhu (2026). Influence of Residual Elements on High-Temperature Mechanical Constitutive Model of DP780 Steel. Metallurgical and Materials Transactions B.DOI
37. 李巧巧，蔡兆镇，王诗博，娄文涛，朱苗勇（2025）. 超大断面异形坯结晶器熔池均匀化流动控制研究. 《钢铁研究学报》.
38. 张雅辰，邓志银，刘晓峰，朱苗勇（2025）. 钙线喂入量对Q355含钛铝镇静钢洁净度的影响. 《钢铁研究学报》.
39. 徐华敏，祭程，朱苗勇（2025）. 连铸坯凝固末端压下过程应变分布实时预测. 《中国冶金》.DOI
40. 周业连，江中块，朱苗勇（2025）. 连铸中间包流动特性理论分析模型. 《过程工程学报》.
41. 解晓晓，罗森，陈耀，王卫领，朱苗勇（2025）. 电磁搅拌对板坯结晶器内钢液流动、凝固和液面波动的影响. 《连铸》.DOI
42. 赵逸，郑淑国，朱苗勇（2025）. 120 t转炉二次燃烧氧枪溅渣射流特性数值模拟. 《炼钢》.
43. 薛秉睿，郑淑国，朱苗勇（2025）. 六流连铸中间包流动、传热及应力行为数值模拟. 《连铸》.DOI
44. Gaolin Lv, Sen Luo, Jian Gong, Zhentong Liu, Youjin Ni, W. J. Wang, Miaoyong Zhu (2025). Characterizing Inclusion in Subsurface of IF Steel Continuously Cast Slab with M-EMS: Numerical Study and Industrial Experiment. Metallurgical and Materials Transactions B.DOI
45. Jiahua Yang, Zhaozhen Cai, Miaoyong Zhu, X. Chen (2025). Influence of Cooling Rate on the Hot Ductility of Low Carbon V–N Steel. ISIJ International.DOI
46. Shibo Wang, Zhaozhen Cai, Yu Duan, Miaoyong Zhu (2025). Mechanical Behavior of Ultra-Large Beam Blank Mold with Different Water-Cooling Structures During Continuous Casting. Metallurgical and Materials Transactions B.DOI
47. Jiyin Jiang, Zhao-Zhen Cai, Miaoyong Zhu, Zhenyu Niu (2025). Thermo-mechanical Behavior of Slab Mold Copper Plates During High-Speed Continuous Casting and Its Coating Layer Structure Optimization. Metallurgical and Materials Transactions B.DOI
48. Jie Su, Zhixuan Dong, Cheng Ji, Miaoyong Zhu, Zonghui Liu (2025). Solute Transport During Solidification end Reduction in Round Bloom Continuous Casting. Metallurgical and Materials Transactions B.DOI
49. Zhixuan Dong, Cheng Ji, Miaoyong Zhu, Liangyong Chen (2025). Effect of Modulated Electromagnetic Stirring in Continuous Casting Bloom. Metallurgical and Materials Transactions B.DOI
50. Jing Luo, Zhixuan Dong, Hang Li, Cheng Ji, Miaoyong Zhu (2025). Influence of a Four-Port SEN with Asymmetric Angles on the Non-uniform Solidification of Ultra-Thick Continuous Casting Slabs. Metallurgical and Materials Transactions B.DOI
51. Peng Liu, Zhaozhen Cai, Miaoyong Zhu, Yingchun Wang (2025). Study on the hot ductility evolution mechanism of high-sulfur peritectic steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
52. Boran Yang, Zhiyin Deng, Miaoyong Zhu (2025). Corrosion behaviors of MgO-ZrO2 refractory by CaO-SiO2-MgO-Al2O3-TiO2 system ladle slag. Ceramics International.DOI
53. Tianci Chen, Cheng Ji, Miaoyong Zhu (2025). Effect of Ti carbonitride on hot ductility of Ti microalloy steel during continuous casting. Journal of Iron and Steel Research International.DOI
54. Kangkang Li, Sen Luo, Weiling Wang, Miaoyong Zhu (2025). Mechanisms of White Band Formation in Continuously Cast Slab Induced by Strand Electromagnetic Stirring. Metallurgical and Materials Transactions B.DOI
55. Zhenyu Niu, Dong Xu, Zhenhua Bai, Jiyin Jiang, Zhaozhen Cai, Miaoyong Zhu (2025). Fluid–structure interaction modeling of unsteady bulging on the solidifying shell during slab continuous casting. Journal of Materials Research and Technology.DOI
56. Tengfei Luo, Weiling Wang, Yunwei Tian, Hongliang Liu, Sen Luo, Miaoyong Zhu (2025). Evolution Behaviors of Primary Carbides and Austenite Grains during Isothermal Austenitizing Process of H13 Steel. steel research international.DOI
57. Tengfei Luo, Weiling Wang, Sen Luo, Hongliang Liu, Miaoyong Zhu (2025). Influence Mechanisms of Mg on Solidification Microstructure and Primary Carbides of H13 Steel. Metallurgical and Materials Transactions B.DOI
58. Chao Liu, Shuguo Zheng, Miaoyong Zhu (2025). Effect of Operating Parameters on the Kinetics of Dephosphorization in a 250 t Converter with Single‐Flow Postcombustion Oxygen Lance. steel research international.DOI
59. Guangyu Hao, Zhiyin Deng, Miaoyong Zhu (2025). Effect of TiO2 addition on the dissolution of MgO·Al2O3 inclusions in TiO2‐bearing ladle slags. Journal of the American Ceramic Society.DOI
60. Shi-Wei Zheng, Zhao-Zhen Cai, Miaoyong Zhu (2025). Effects of Submerged Entry Nozzle Parameters on Fluid Flow, Heat Transfer, and Solidification in High-Speed Continuous Casting Slab Mold. Metallurgical and Materials Transactions B.DOI
61. Yuwei Yang, Sen Luo, Lie Chen, Haida Wang, Weiling Wang, Miaoyong Zhu (2025). Effect of Multi-stage Electromagnetic Stirring on Solidification Structure and Macrosegregation in Continuously Cast Round Bloom. Metallurgical and Materials Transactions B.DOI
62. Wenjie Tong, Sen Luo, Weiling Wang, Miaoyong Zhu (2025). Effect of Nonsinusoidal Mold Oscillation Modes on Slag Consumption and Initial Solidification Behavior in the Meniscus Region during Continuous Casting Process. steel research international.DOI
63. Yuwei Yang, Sen Luo, Weiling Wang, Miaoyong Zhu (2025). Macrosegregation in Continuously Cast Round Bloom with Final Axial Linear Electromagnetic Stirring: A Numerical Study and Industrial Test. Metallurgical and Materials Transactions B.DOI
64. Xinlong Yang, Jiaru Han, Sen Luo, Fuming Wang, Weiling Wang, Miaoyong Zhu (2025). Characteristics of AlN Precipitation in Continuously Cast Slab of High-Manganese Non-Magnetic Steel. Metallurgical and Materials Transactions B.DOI
65. Xian-Yang Wang, Zhao-Zhen Cai, Miaoyong Zhu (2025). Influence of Mold Flux Infiltration and Level Fluctuation Under High Speed Casting with Dynamic Shell Bulging. Metallurgical and Materials Transactions B.DOI
66. Wenjie Tong, Sen Luo, Xiaohua Wang, Chunxin Wei, Weiling Wang, Miaoyong Zhu (2025). Hook formation and control mechanisms in continuously cast slabs of ultra-low carbon steel. International Journal of Minerals Metallurgy and Materials.DOI
67. Peng Liu, Zhaozhen Cai, Miaoyong Zhu (2025). Effect of La Treatment and Al–La Composite Treatment on Sulfur-Containing Peritectic Steel. Metallurgical and Materials Transactions B.DOI
68. Wenjie Tong, Sen Luo, Gaolin Lv, Jian Qing Gong, Zhentong Liu, Youjin Ni, Weiling Wang, Miaoyong Zhu (2025). Industrial Experimental Investigation on Characteristics of Hook and Subsurface Inclusions in Ultra-Low Carbon Steel Continuously Cast Slab. Metallurgical and Materials Transactions B.DOI
69. Boran Yang, Zhiyin Deng, Miaoyong Zhu (2025). Interaction behaviors of magnesia-zirconia refractory with high Ti steel grade at 1600 °C. Ceramics International.DOI
70. Zeyu Wang, Wentao Lou, Miaoyong Zhu (2025). Numerical simulation of multiphase flow field and temperature field in electric arc heating process of ladle furnace based on volume of fluid—discrete phase model—magnetohydrodynamic model. Physics of Fluids.DOI
71. Hang Zhang, Weiling Wang, Chenxu Zhao, Zhaozhen Cai, Binzhou Li, Miaoyong Zhu (2025). Numerical Simulation of Contact and Wear Between Deformed Mold and Solidified Shell Based on Archard Model. Metallurgical and Materials Transactions B.DOI
72. Haoyu Lu, Sen Luo, Guorong Wu, Xin Xie, Xiaotao Ma, Yinchang Jiang, Weiling Wang, Miaoyong Zhu (2025). Investigation on TiN Precipitation in Continuously Cast Slab of Ti-Alloyed Steel Via Multi-scale Simulation and Experimental Statistical Analysis. Metallurgical and Materials Transactions B.DOI
73. Tianci Chen, Cheng Ji, Jianhua Yang, Yunguang Chi, Miaoyong Zhu (2025). Grain growth kinetics model of high-temperature ferrite and austenite in Ti microalloyed steel during continuous casting. International Journal of Minerals Metallurgy and Materials.DOI
74. Shaoyuan Shi, Cheng Ji, Miaoyong Zhu (2025). Strain-Induced Precipitation and Softening Behavior of Ti-Microalloyed Steel Under Heavy Reduction at the Solidification End of Continuous Casting Slab. Metallurgical and Materials Transactions A.DOI
75. Zhida Zhang, Jize Chen, Cheng Ji, Yutang Ma, Miaoyong Zhu, Wenxue Wang (2025). Numerical simulation of the deformation risk in thin slab continuous casting process with liquid core reduction. International Journal of Minerals Metallurgy and Materials.DOI
76. Kangkang Li, Sen Luo, Weiling Wang, Miaoyong Zhu (2025). Evolution of Solidification Structure and Macrosegregation in Continuously Cast Slab Induced by Strand Electromagnetic Stirring. steel research international.DOI
77. Zhida Zhang, Cheng Ji, Junlong Ju, Kaixiang Li, Miaoyong Zhu (2025). Micromechanical behavior and microcrack evolution in continuous casting slab: Experimental characterization, multiscale simulation and industrial validation. Journal of Materials Processing Technology.DOI
78. Yuwei Yang, Sen Luo, Lie Chen, Haida Wang, Weiling Wang, Miaoyong Zhu (2025). Effect of Eccentric Final Electromagnetic Stirring on Solidification Structure and Macrosegregation in Continuously Cast Round Bloom. Metallurgical and Materials Transactions B.DOI
79. Bochun Liang, Cheng Ji, Miaoyong Zhu (2025). Constitutive Modeling of the Continuous Casting Steels Based on PSO–DNN Fusion Model. Metallurgical and Materials Transactions B.DOI
80. Yinxing Guo, Weiling Wang, Sen Luo, Yingying Yue, Miaoyong Zhu (2025). Influence of Residual Element Cu on Dendrite Growth Kinetics of Steel in Multi-Component System. Metallurgical and Materials Transactions B.DOI
81. Guodong Song, Zhiyin Deng, Miaoyong Zhu (2025). Combined effect of refractory and refining slag on inclusions in tire cord steel. Ceramics International.DOI
82. Xiaoliang Meng, Sen Luo, Bingzhi Ren, Gaolin Lv, Yelian Zhou, Weiling Wang, Miaoyong Zhu (2025). Effect of Argon Blowing on Mold Level in a Commercial Slab Continuous Caster. Metallurgical and Materials Transactions B.DOI
83. Weiling Wang, Hang Zhang, Tiguang Zhang, Zhaozhen Cai, Yingying Yue, Miaoyong Zhu (2025). Investigation of Multi-interface Heat Transfer Behavior Between Solidified Shell and Copper Mold Tube in Continuous Casting of Bloom. Metallurgical and Materials Transactions B.DOI
84. Li-bin Jin, Shuguo Zheng, Miaoyong Zhu (2025). A Coupling Model Predicting the Precipitation and Growth of AlN and MnS Inclusions in Fe–5Mn–xAl–0.15C Medium Mn Steels. Metallurgical and Materials Transactions B.DOI
85. Chunxin Wei, Gaolin Lv, Sen Luo, Bingzhi Ren, Xiaohua Wang, Weiling Wang, Miaoyong Zhu (2025). Numerical Simulation of Fluid Flow and Initial Solidification in Slab Continuous Casting Mold with FC Mold G3. steel research international.DOI
86. Yonggang Jin, Sen Luo, Xiaoliang Meng, Zhiyuan Liu, Chongjun Wang, Weiling Wang, Miaoyong Zhu (2025). A Real-Time Prediction Method for Heat Flux in Continuous Casting Mold with Optical Fibers. Metallurgical and Materials Transactions B.DOI
87. Shaobo Wang, Zhiyin Deng, Guodong Song, Miaoyong Zhu (2025). Distribution Behaviors of Phosphorus in CaO–SiO 2 –FeO x –MgO–MnO–Al 2 O 3 Basic Oxygen Furnace Slags. steel research international.DOI
88. Shibo Wang, Zhaozhen Cai, Miaoyong Zhu (2025). Behavior of Shell Initial Solidification in Ultra-Large Beam Blank Continuous Casting Mold. Metallurgical and Materials Transactions B.DOI
89. Bochun Liang, Chunxi Han, Tan Zhao, Cheng Ji, Miaoyong Zhu (2025). Research on Constitutive Modeling of DH460 Continuous Casting Steel with the Solidification End Reduction Process. Materials.DOI
90. Hongyu Chen, Cheng Ji, Miaoyong Zhu (2025). Prediction of Casting Roller Wear During the Solidification End Reduction of Continuous Casting Bloom. Metallurgical and Materials Transactions B.DOI
91. 贲东阳，蔡兆镇，朱苗勇，徐栋，赵和明（2024）. 凸透镜形结晶器内铸坯凝固传热行为. 《中国冶金》.
92. 邢飞，郑淑国，朱苗勇（2024）. 单流双通道板坯感应加热中间包的数值模拟及工业试验. 《中国冶金》.
93. 禚朔，王卫领，赵阳，朱苗勇（2024）. Q355B板坯高温拉伸晶粒弹塑性变形行为. 《钢铁》.
94. 邢飞，朱苗勇，郑淑国（2024）. 采用气幕挡墙感应加热中间包的模拟研究. 《炼钢》.
95. 王鑫，张飞，刘泳，张彩东，田志强，郑淑国，朱苗勇（2024）. 浸入式喷吹铁水包内多相流行为与反应动力学. 《炼钢》.
96. Jing-Jing Ma, Wei Li, Gui-Qin Fu, Miao-Yong Zhu (2024). Effect of TiO2 on the Phase Transformation and Microstructure Evolution of Ti-Containing Melting Slag in the Alkali Fusion Process. JOM.DOI
97. Peng Liu, Zhaozhen Cai, Miaoyong Zhu (2024). Effects of sulphur content and cooling rate on the precipitation characteristics of MnS in high-sulphur peritectic steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
98. Wenjie Tong, Sen Luo, Yelian Zhou, Yingchun Wang, Weiling Wang, Miaoyong Zhu (2024). Inclusion Capture Mechanism of Hook in Low Carbon Steel Continuously Cast Slab. Metallurgical and Materials Transactions B.DOI
99. Kang Yuan, Zhiyin Deng, Miaoyong Zhu (2024). Sintering behaviours of different ladle filler sands with high-chromium stainless steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
100. Xiaoxiao Wang, Zhiyin Deng, Miaoyong Zhu (2024). Evolution of nonmetallic inclusions in high Mn–high Al steel during heat treatment. Ironmaking & Steelmaking Processes Products and Applications.DOI
101. Jibai Kang, Weiling Wang, Miaoyong Zhu (2024). A novel liquid fraction iteration methodology for addressing oscillatory issues in the total enthalpy method. International Journal of Thermal Sciences.DOI
102. Xiaoliang Meng, Sen Luo, Yelian Zhou, Weiling Wang, Miaoyong Zhu (2024). Control of Instantaneous Abnormal Mold Level Fluctuation in Slab Continuous Casting Mold Based on Bidirectional Long Short‐Term Memory Model. steel research international.DOI
103. Zhenzhuo Zhang, Zhiyin Deng, Zhigang Liang, Miaoyong Zhu (2024). Evolution of Non-metallic Inclusions in Si-Ca-Ba-Killed Heavy Rail Steel During Secondary Refining Process. Metallurgical and Materials Transactions B.DOI
104. Jiaru Han, Sen Luo, Ning Liu, Kui Chen, Shizheng Xie, Weiling Wang, Miaoyong Zhu (2024). Experimental investigation on effect of cooling rate on carbide precipitation during solidification of high manganese steel. Journal of Materials Research and Technology.DOI
105. Xiaoliang Meng, Sen Luo, Xiaobo Xi, Yelian Zhou, Weiling Wang, Miaoyong Zhu (2024). Characterizing and Controlling Abnormal Periodic Mold Level Fluctuations in a Commercial Slab Continuous Caster Using Big Data. Metallurgical and Materials Transactions B.DOI
106. Shibo Wang, Zhaozhen Cai, Miaoyong Zhu (2024). The Heat Transfer Behavior of Ultra-Large Beam Blank Continuous Casting Mold with Different Water-Cooling Structure. Metallurgical and Materials Transactions B.DOI
107. Tengfei Luo, Weiling Wang, Tingrui Shang, Hongliang Liu, Sen Luo, Miaoyong Zhu (2024). Experimental and Numerical Investigations on Solidification Thermodynamics of H13 Steel with Multi components. Metallurgical and Materials Transactions B.DOI
108. Xiao-hua Wang, Wenjie Tong, Sen Luo, Ye-lian Zhou, Weiling Wang, Miaoyong Zhu (2024). Experimental investigation on characteristics of hook in continuously cast slab of low carbon steel. Journal of Iron and Steel Research International.DOI
109. Pengyuan Dong, Shuguo Zheng, Miaoyong Zhu (2024). Combustion Behavior of Supersonic Jet for Single‐Flow Postcombustion Oxygen Lance with Various Secondary Nozzle Parameters. steel research international.DOI
110. Jibai Kang, Weiling Wang, Sen Luo, Miaoyong Zhu (2024). Comparative Analysis of Fixed-Grid Methods in Addressing a Benchmark Problem Coupled Natural Convection and Melting. Metallurgical and Materials Transactions B.DOI
111. Guorong Wu, Tianci Chen, Hongyu Chen, Cheng Ji, Miaoyong Zhu (2024). The Crack Control Strategy Is Influenced by the Continuous Casting Process of Cr12MoV Steel. steel research international.DOI
112. Guangyu Hao, Zhiyin Deng, Xiaofeng Liu, Miaoyong Zhu (2024). Effect of TiO2 Addition in Ladle Slag on Evolution of Nonmetallic Inclusions in Ti-Bearing Al-Killed Steel. Metallurgical and Materials Transactions B.DOI
113. Huixin Liu, Zhiyin Deng, Miaoyong Zhu (2024). Interaction Behaviors of Ce‐Treated Al‐Killed Steel Grades with Different Refractories. steel research international.DOI
114. Shuguo Zheng, Pengyuan Dong, Miaoyong Zhu (2024). Numerical Analysis of Multiphase Flow and Post-Combustion Characteristics in a Top-Blown Converter with Various Operating Parameters. Metallurgical and Materials Transactions B.DOI
115. Shibo Wang, Zhaozhen Cai, Miaoyong Zhu (2024). Non-uniform Solidification Behavior of Shell in Ultra-Large Beam Blank Mold. Metallurgical and Materials Transactions B.DOI
116. Cheng Ji, Tianci Chen, Miaoyong Zhu (2024). Carbonitride Precipitation Kinetics Model During Continuous Casting of Ti Microalloyed Steel. Metallurgical and Materials Transactions A.DOI
117. Yuwei Yang, Chao Liu, Sen Luo, Weiling Wang, Miaoyong Zhu (2024). Numerical investigation on effect of electromagnetic stirring on macrosegregation in continuously cast round bloom via three-phase solidification model. Ironmaking & Steelmaking Processes Products and Applications.DOI
118. Cheng Ji, Hongan Zhang, Zhixuan Dong, Liangyong Chen, Miaoyong Zhu (2024). Numerical Simulation of the Steel Strip-Feeding Swing in the Bloom Continuous Casting Mold with Electromagnetic Stirring. Metallurgical and Materials Transactions B.DOI
119. Guodong Song, Zhiyin Deng, Miaoyong Zhu (2024). Effect of Ladle Washing Operation on Non-metallic Inclusions in Tire Cord Steel: Laboratory Simulation. Metallurgical and Materials Transactions B.DOI
120. Chunxin Wei, Zhiyin Deng, Guangyu Hao, Boran Yang, Miaoyong Zhu (2024). Effect of alloying on the cleanliness of Ti-stabilised interstitial-free (IF) steel during Ruhrstahl–Heraeus (RH) treatment. Ironmaking & Steelmaking Processes Products and Applications.DOI
121. Li-bin Jin, Shuguo Zheng, Miaoyong Zhu (2024). Effect of Al Content on Formation Mechanism of AlN and MnS Inclusions in Fe-5Mn-xAl-0.15C-0.23Si Medium Mn Steel. JOM.DOI
122. Haoyu Lu, Sen Luo, Weiling Wang, Miaoyong Zhu (2024). Graphics‐Processing‐Unit‐Accelerated 3D Online Heat Transfer and Solidification Model for Continuously Cast Slab. steel research international.DOI
123. Shuguo Zheng, Pengyuan Dong, Miaoyong Zhu (2024). Numerical analysis and industrial practice of single-flow post-combustion oxygen lance with high oxygen supply intensity. Ironmaking & Steelmaking Processes Products and Applications.DOI
124. Boran Yang, Zhiyin Deng, Miaoyong Zhu (2024). Study on High‐Temperature Reactions of MgO Refractory with Ti‐Bearing Al‐Killed Steel. steel research international.DOI
125. Zhiyin Deng, Xiaomeng Zhang, Guangyu Hao, Chunxin Wei, Miaoyong Zhu (2024). Dissolution behavior of Al2O3 inclusions into CaO–MgO–SiO2–Al2O3–TiO2 system ladle slags. International Journal of Minerals Metallurgy and Materials.DOI
126. Tianci Chen, Xin Hu, Tan Zhao, Cheng Ji, Miaoyong Zhu (2024). Microstructure evolution and its influence on thermoplasticity of wide and thick continuous casting slab with heavy reduction. Journal of Iron and Steel Research International.DOI
127. Guodong Song, Zhiyin Deng, Fengting Qin, Zonghui Liu, Miaoyong Zhu (2024). Effect of MgO content in refining slag on the non-metallic inclusions in tire cord steel. Journal of Materials Research and Technology.DOI
128. Xiaomeng Zhang, Zhiyin Deng, Ziwen Yan, Chunxin Wei, Miaoyong Zhu (2024). Effect of TiO2 Addition on the Viscosity of Ladle Refining Slags. Metallurgical and Materials Transactions B.DOI
129. Xing Xia, Cheng Ji, Miaoyong Zhu (2024). Real-Time Force Prediction Model of Blooms in the Reduction. Metallurgical and Materials Transactions B.DOI
130. Tianci Chen, Cheng Ji, Yang Liu, Miaoyong Zhu (2024). Titanium Carbides Precipitation Characteristics and Influence on Hot Ductility in 0.37 pct Ti–Mo Slab During Continuous Casting. Metallurgical and Materials Transactions B.DOI
131. Chao Liu, Shuguo Zheng, Miaoyong Zhu (2024). Numerical Study of the Kinetics of Dephosphorization with Single-Flow Post-combustion Oxygen Lance in Converter Steelmaking Process. Metallurgical and Materials Transactions B.DOI
132. Pengyuan Dong, Shuguo Zheng, Miaoyong Zhu (2024). Numerical Study on the Combustion Phenomena in the Gas Region of a Top-Blown Converter With Single-Flow Post-Combustion Oxygen Lance. Metallurgical and Materials Transactions B.DOI
133. Wenjie Tong, Sen Luo, Weiling Wang, Miaoyong Zhu (2024). Modelling of Meniscus Behavior and Slag Consumption During Initial Casting Stage of Continuous Casting Process. Metals and Materials International.DOI
134. Kang Yuan, Zhiyin Deng, Miaoyong Zhu (2024). Effect of Carbon on Sintering Behavior of Chromite‐Based Ladle Filler Sands. steel research international.DOI
135. Wenguang Hu, Zhixuan Dong, Cheng Ji, Miaoyong Zhu (2024). Influence of External Physical Fields on Grain Distribution in Continuous Cast Round Blooms. Metallurgical and Materials Transactions B.DOI
136. Wenjie Tong, Sen Luo, Weiling Wang, Miaoyong Zhu (2024). Numerical Simulation of Oscillation Mark Formation and Slag Consumption in Meniscus Region During a Mold Oscillation Cycle. Metallurgical and Materials Transactions B.DOI
137. Fei Xing, Shuguo Zheng, Miaoyong Zhu (2024). Channel parameter optimization of one-strand slab induction heating tundish with double channels. High Temperature Materials and Processes.DOI
138. 张加毓，娄文涛，邵品，朱苗勇（2023）. 钢包透气砖防钢液渗漏的数值模拟. 《中国冶金》.
139. 刘宏强，郑淑国，朱苗勇（2023）. 浇注钢包环出钢口多孔透气塞吹氩去夹杂行为数值模拟. 《中国冶金》.
140. 孟晓亮，罗森，周业连，王卫领，朱苗勇（2023）. 板坯连铸结晶器液位瞬时异常波动的时频特性. 《冶金自动化》.
141. 程彪，蔡兆镇，安家志，朱苗勇（2023）. 双相变回温温度对钢组织及其热塑性的影响. 《钢铁》.
142. 罗森，朱苗勇（2023）. 高锰钢凝固特性及连铸工艺研究现状. 《钢铁》.
143. 罗森，杨宇威，王卫领，朱苗勇（2023）. 高拉速连铸结晶器电磁控流技术发展. 《材料与冶金学报》.
144. 邓志银，朱苗勇（2023）. 洁净钢精炼钙处理技术探析. 《钢铁》.
145. 龙云贺，郑淑国，朱苗勇（2023）. 中间包感应加热与吹氩协同控制工艺数值模拟. 《炼钢》.
146. 王晓慧，郑淑国，朱苗勇（2023）. 140t铁水包底吹氩混合特性物理模拟研究. 《炼钢》.
147. 禹绍鸿，邓志银，朱苗勇，尚德礼，唐复平（2023）. 碳酸钙在转炉粗炼钢中的脱磷行为. 《钢铁研究学报》.
148. 张礼浩，祭程，朱苗勇（2023）. 连铸大方坯结晶器喂带过程钢带摆动与变形行为的数值模拟. 《钢铁研究学报》.
149. 张成德，郑淑国，朱苗勇（2023）. 150t转炉五孔氧枪射流特性数值模拟研究. 《钢铁研究学报》.
150. 朱苗勇，罗森（2023）. 高效连铸数字化发展思考. 《冶金自动化》.
151. 宋翰凌，孟晓亮，罗森，王卫领，朱苗勇（2023）. 基于深度学习的连铸坯低倍质量评级. 《冶金自动化》.
152. 王少波，鹿焱，刘震，谷茂强，朱苗勇（2023）. 双渣法降低铁钢比的实践探索. 《第十四届中国钢铁年会论文集—4.炼钢与连铸》.DOI
153. 姜嵇银，蔡兆镇，朱苗勇（2023）. 板坯连铸结晶器铜板热/力学行为数值模拟研究. 《第十四届中国钢铁年会论文集—4.炼钢与连铸》.DOI
154. Tingrui Shang, Wei-Ling Wang, Jianhui Kang, Sen Luo, Miao-yong Zhu (2023). Precipitation behavior of TiN in solidification of 20CrMnTi under continuous casting conditions. Journal of Materials Research and Technology.DOI
155. Wei-Ling Wang, Tengfei Luo, Zong-hui Liu, Sen Luo, Miao-yong Zhu (2023). Influences of Cooling Rate on Solidification Microstructure and Carbide of GCr15 Bearing Steel. Metallurgical and Materials Transactions B.DOI
156. Miao-yong Zhu, Zhao-Zhen Cai (2023). Formation Mechanism and Control Technology of Transverse Corner Cracks During Slab Continuous Casting of Microalloyed Steels. Steel Research International.DOI
157. Xiaomeng Zhang, Ziwen Yan, Zhi-Yin Deng, Miao-yong Zhu (2023). Effect of TiO2 Addition on the Melting Behaviors of CaO-SiO2-30%Al2O3-5%MgO System Refining Slags. Metals.DOI
158. Sen Luo, Kangkang Li, Wei-Ling Wang, Miao-yong Zhu (2023). Numerical Simulation of Macrosegregation in Continuously Cast Slab with Application of S-EMS and MR. Journal of Materials Research and Technology.DOI
159. Jing-Jing Ma, Wei Li, Gui-Qin Fu, Miao-yong Zhu (2023). Influence of MgO on the alkali fusion behavior and mechanism of titanium-containing melting slag. Journal of Materials Research and Technology.DOI
160. D. Jiang, Miao-yong Zhu, Lifeng Zhang (2023). Roll‐Gap Deviation on Centerline Segregation Evolution in Continuous Casting Slab. Steel Research International.DOI
161. Hong-Yu Chen, C. Ji, Miao-yong Zhu (2023). H-Shaped Process of Continuous Casting Bloom With Double-Sided Convex Roll Reduction for H-Beam Blank Effective Production. Metallurgical and Materials Transactions B.DOI
162. Xiaolian Meng, Sen Luo, Ye-Lian Zhou, Wei-Ling Wang, Miao-yong Zhu (2023). Time–Frequency Characteristics and Predictions of Instantaneous Abnormal Level Fluctuation in Slab Continuous Casting Mold. Metallurgical and Materials Transactions B.DOI
163. Xing Xia, Cheng Ji, Miaoyong Zhu (2023). Real-Time Thermal Tracking Model With Consideration of Dynamic Thermophysical Properties Loading in the Process of Steel Continuous Casting. Metallurgical and Materials Transactions B.DOI
164. Fan Yang, Zhi-Yin Deng, Miao-yong Zhu (2023). Evolution of Nonmetallic Inclusions in Ti‐Bearing Al‐Killed Steel during Heat Treatment at 1200 °C. Steel Research International.DOI
165. Ziwen Yan, Zhi-Yin Deng, Miao-yong Zhu (2023). Study on volatilization behaviour of BOF converter slag containing CaCl2. Ironmaking & Steelmaking.DOI
166. Guo-Dong Song, Zhi-Yin Deng, Miao-yong Zhu (2023). Effect of K_2O and Na_2O in Refining Slag on Non-metallic Inclusions in Tire Cord Steel. Metallurgical and Materials Transactions B.DOI
167. Yi Chen, C. Ji, Miao-yong Zhu (2023). Prediction Model of the Proeutectoid Ferrite Growth of a Continuous Casting Slab. Metallurgical and Materials Transactions. A.DOI
168. Jingshi Zhang, W. Lou, Miao-yong Zhu (2023). Numerical Simulation of Particle Transport Phenomenon in Steelmaking Converter With Bottom Powder Injection Based on Eulerian-Multifluid VOF-Granular Flow Model. Metallurgical and Materials Transactions B.DOI
169. Zhi-yuan Liu, Lihua Zhang, C. Ji, Miao-yong Zhu, Chong-jun Wang (2023). Flow stress and constitutive relations of ship plate steel continuous casting slab with solidification end reduction process. Journal of Iron and Steel Research International.DOI
170. Jingshi Zhang, W. Lou, Miao-yong Zhu (2023). Numerical Simulation of Particle Motion and Wall Scouring Behavior in Steelmaking Converter With Bottom Powder Injection. Metallurgical and Materials Transactions B.DOI
171. Zhuang Liu, Wentao Lou, Miaoyong Zhu (2023). Numerical Analysis of Fluid Flow and Powder Transport Characteristics of RH-Degasser Ladle Bottom Powder Injection (RH-PBI) Process. Metallurgical and Materials Transactions B.DOI
172. Haijun Xu, Zhixuan Dong, Cheng Ji, Miaoyong Zhu (2023). The Effects of Heating on the Three-Dimensional Evolution of Microsegregation in Continuous Casting Blooms of Gear Steel. Metallurgical and Materials Transactions B.DOI
173. Yuwei Yang, Sen Luo, Weiling Wang, Miaoyong Zhu (2023). Multiphase Solidification Modeling of Solidification Structure Evolution and Macrosegregation of Round Bloom Continuous Casting Process with Mold Electromagnetic Stirring and Final Electromagnetic Stirring. steel research international.DOI
174. Guangyu Hao, Zhiyin Deng, Chunxin Wei, Miaoyong Zhu (2023). Degradation Behavior of MgO-Based Refractory by CaO-SiO2-Al2O3-MgO-TiO2 System Ladle Slags. Metallurgical and Materials Transactions B.DOI
175. Zhuang Liu, Wentao Lou, Miaoyong Zhu (2023). Powder transport behavior in RH degasser with powder injection through up snorkel: a transient numerical model. Journal of Iron and Steel Research International.DOI
176. Li-bin Jin, Shuguo Zheng, Miaoyong Zhu (2023). Formation Mechanism of AlN-MnS Complex Inclusions in Fe-5Mn-2Al-0.15C Medium Mn Steel. JOM.DOI
177. Ziwen Yan, Zhiyin Deng, Miaoyong Zhu (2023). Penetration Behavior of CaO–SiO2–FeOx–MgO–(CaCl2) Slags in MgO Refractory. Metallurgical and Materials Transactions B.DOI
178. Chao Liu, Shuguo Zheng, Miaoyong Zhu (2023). Variation in Multiphase Flow Characteristics by Single-Flow Post-combustion Oxygen Lance Blowing in BOF Steelmaking. Metallurgical and Materials Transactions B.DOI
179. 孟祥宁，崔磊，朱苗勇（2022）. 元胞自动机模拟钢凝固组织演化研究进展. 《中南大学学报(自然科学版)》.
180. 邓魏凯，杨博然，郭栩萍，顾芷卉，邓志银，朱苗勇（2022）. 氧化铝对铬质引流砂烧结行为的影响. 《中国冶金》.
181. 杨澈，朱苗勇，杜涛，刘承军（2022）. “新冶金”复合型人才培养体系研究与实践. 《中国冶金教育》.
182. 朱苗勇（2022）. 钢精炼和浇注过程夹杂物行为及其控制.
183. 钱云强，郑淑国，朱苗勇（2022）. 偏心底吹氩钢锭流场及混合特性数值模拟. 《中国冶金》.
184. 肖震，郑淑国，朱苗勇（2022）. 浇注钢包环出钢口四孔透气塞吹氩控制下渣工艺. 《钢铁研究学报》.
185. 袁康，杨博然，邓志银，朱苗勇（2022）. 莫来石和氧化铝对高锰高铝钢用铬质引流砂烧结的影响. 《钢铁研究学报》.
186. 郑淑国，朱苗勇（2022）. 250 t转炉二次燃烧氧枪射流特性. 《过程工程学报》.
187. 罗腾飞，王卫领，刘宗辉，罗森，朱苗勇（2022）. GCr15轴承钢连铸冷却速率下凝固原位观察. 《钢铁》.
188. 邓志银，彭朋，朱苗勇（2022）. 钢包引流砂烧结与钢包自动开浇率提升研究进展. 《钢铁》.
189. 彭宁琦，付贵勤，杨建华，周文浩，朱苗勇（2022）. Q690q耐候桥梁钢免预热焊接热影响区的组织性能. 《钢铁》.
190. 朱苗勇，邓志银（2022）. 钢精炼过程非金属夹杂物演变与控制. 《金属学报》.
191. 刘壮，娄文涛，朱苗勇（2022）. RH侧底喷粉精炼过程流动特性. 《钢铁研究学报》.
192. 王朝辉，罗森，王卫领，朱苗勇（2022）. 帘线钢82B小方坯电磁搅拌结晶器多场传输行为. 《连铸》.
193. 朱苗勇，娄文涛（2022）. 炼钢过程多相流及其反应动力学数值模拟研究. 《材料与冶金学报》.
194. 朱苗勇，蔡兆镇（2022）. 高拉速板坯连铸凝固传热行为及其均匀性控制. 《第十三届中国钢铁年会论文集（摘要）——大会特邀报告&分会场特邀报告》.DOI
195. 王鑫，郑淑国，朱苗勇（2022）. 旋转喷吹与传统喷吹铁水包内气液两相流行为对比. 《炼钢》.
196. 蔡兆镇，王少波，刘志远，匡泓旭，董嘉宁，朱苗勇（2022）. 厚板连铸机末端高温全连续淬火技术研发与应用. 《第十三届中国钢铁年会论文集（摘要）——大会特邀报告&分会场特邀报告》.DOI
197. 张靖实，娄文涛，朱苗勇（2022）. 底喷粉转炉炉体振动行为的物理模拟研究. 《第十三届中国钢铁年会论文集——3.炼钢与连铸》.DOI
198. 祭程，朱苗勇（2022）. 连铸凝固末端压下过程裂纹萌生扩展风险预测. 《钢铁研究学报》.
199. 彭宁琦，付贵勤，周文浩，范明，熊祥江，朱苗勇（2022）. 高强韧耐候桥梁钢Q690qNH的防断选材及验收方法. 《钢铁》.
200. 蔡兆镇，朱苗勇（2022）. 微合金钢薄板坯连铸边角裂纹控制. 《工程科学学报》.
201. 商庭瑞，王卫领，康吉柏，朱苗勇，罗森（2022）. 20CrMnTi连铸瞬态与平均冷速条件下凝固原位观察. 《钢铁》.
202. 朱苗勇，蔡兆镇（2022）. 高速连铸结晶器内凝固传热行为及其均匀性控制. 《工程科学学报》.
203. 周业连，邓志银，朱苗勇（2022）. 非球形固态夹杂物穿过钢-渣界面行为研究. 《过程工程学报》.
204. Lang Liu, Rui Guan, C. Ji, Miao-yong Zhu (2022). Evolution of Porosity Microsegregation in Continuous Casting Bloom During the Heating Process. Metallurgical and Materials Transactions B.DOI
205. Jing-Jing Ma, Wei Li, Gui-Qin Fu, Miao-yong Zhu (2022). Effect of Roasting Characteristics on the Alkali Fusion Behavior and Mechanism of Melting Titanium Slag. Journal of Sustainable Metallurgy.DOI
206. Jiazhi An, Zhao-Zhen Cai, Miao-yong Zhu (2022). Effect of titanium content on the refinement of coarse columnar austenite grains during the solidification of peritectic steel. International Journal of Minerals, Metallurgy, and Materials.DOI
207. Pengyu Dong, Shu-Guo Zheng, Miao-yong Zhu (2022). Simulation and application of post-combustion oxygen lance in a top-blown converter. Ironmaking & Steelmaking.DOI
208. R. Guan, C. Rodrigues, C. Ji, Miao-yong Zhu, Shengli Li, Meng-Huai Wu, A. Kharicha, A. Vakhrushev, A. Ludwig (2022). Novel Strategy to Model Deformation-Induced Strand Contraction/Dilatation during Mechanical Reduction. Applied Mathematical Modelling.DOI
209. Zhao-Zhen Cai, Jiazhi An, Biao Cheng, Miao-yong Zhu (2022). Effect of Austenite Grain Size on the Hot Ductility of Nb-Bearing Peritectic Steel. Metallurgical and Materials Transactions. A.DOI
210. Guo-Dong Song, Zhi-Yin Deng, Lei Chen, Miao-yong Zhu (2022). Study on formation of dual-phase MnO–SiO2-based inclusions in tire cord steel. Metallurgical Research & Technology.DOI
211. Bo-Na Yang, Zhi-Yin Deng, Miao-yong Zhu (2022). Sintering Behavior of New Chromite-Alumina Mixed Ladle Filler Sands for High Mn-High Al Steel Grades. Metallurgical and Materials Transactions B.DOI
212. Jiazhi An, Zhao-Zhen Cai, Miao-yong Zhu (2022). Role of Ti on the Growth of Coarse Columnar Austenite Grain During Nb-Bearing Peritectic Steel Solidification. Metallurgical and Materials Transactions. A.DOI
213. Xue-tao Yuan, Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2022). Experimental Investigation on Solidification Structure and Carbides in Continuously Cast Slab of High Manganese Steel Mn13. Metallurgical and Materials Transactions B.DOI
214. Jingshi Zhang, W. Lou, P. Shao, Miao-yong Zhu (2022). Mathematical Simulation of Impact Cavity and Gas–Liquid Two-Phase Flow in Top–Bottom Blown Converter with Eulerian-Multifluid VOF Model. Metallurgical and Materials Transactions B.DOI
215. Jiazhi An, Zhao-Zhen Cai, Miao-yong Zhu (2022). Effect of titanium on the discontinuous growth of as-cast coarse columnar γ grain of peritectic carbon steel. Ironmaking & steelmaking.DOI
216. Jing-shi Zhang, W. Lou, Miao-yong Zhu (2022). Physical modelling of particle transport phenomenon and vibration behavior of converter with bottom powder injection. Journal of Iron and Steel Research International.DOI
217. Jiazhi An, Zhao-Zhen Cai, Biao Cheng, Miao-yong Zhu (2022). Nb–Ti composite precipitation behaviour and its effect on the growth of austenite grains in peritectic steel. Ironmaking & Steelmaking.DOI
218. Ya-Qi Guo, Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2022). A GPU-accelerated 3D PF-LBM modelling of multi-dendritic growth in an undercooled melt of Fe-C binary alloy. Journal of Materials Research and Technology.DOI
219. Yi Chen, C. Ji, Miao-yong Zhu (2022). Design of Process and Equipment for Wide-Thick Slab CSC-Roll Reduction and Study of the Resulting Surface Crack Risk. Metallurgical and Materials Transactions B.DOI
220. Pengyu Dong, Shu-Guo Zheng, Miao-yong Zhu (2022). Numerical Study on Gas-Metal-Slag Interaction with Single-Flow Postcombustion Oxygen Lance in the Steelmaking Process of a Top-Blown Converter. JOM.DOI
221. Lihua Zhang, Rui Guan, C. Ji, Miao-yong Zhu (2022). The Investigation of Phase Transition and Solute Transport for Bloom Continuous Casting with Steel Strip‐Feeding Process and Mold Electromagnetic Stirring: A Comparative Study. Steel Research International.DOI
222. Ziwen Yan, Zhi-Yin Deng, Miao-yong Zhu (2022). Degradation Behavior of MgO Refractory by BOF Slags Containing Calcium Chloride. Metallurgical and Materials Transactions B.DOI
223. Xiaoliang Meng, Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2022). A detection model for corner cracks of continuous casting strand based on deep learning. Ironmaking & Steelmaking.DOI
224. Wei-Ling Wang, Zhijian An, Sen Luo, Miao-yong Zhu (2022). In-situ observation of peritectic solidification of Fe-Mn-Al-C steel with medium manganese. Journal of Alloys and Compounds.DOI
225. 郑淑国，朱苗勇（2021）. 转炉二次燃烧氧枪技术研究进展. 《鞍钢技术》.
226. 张杰，郑淑国，朱苗勇（2021）. 加热功率对感应加热中间包影响的数值模拟. 《中国冶金》.DOI
227. 潘文峰，蔡兆镇，王少波，朱苗勇（2021）. 连铸板坯二冷高温区传热均匀性研究与优化. 《中国冶金》.DOI
228. 朱苗勇（2021）. 高拉速连铸过程传输行为特征及关键技术探析. 《钢铁》.DOI
229. 胡文广，祭程，朱苗勇（2021）. 重轨钢连铸大方坯凝固末端压下过程的数值模拟. 《连铸》.DOI
230. 康吉柏，王卫领，罗腾飞，罗森，朱苗勇（2021）. 20CrMnTi钢160mm×160mm方坯内部质量控制. 《钢铁》.DOI
231. Xingnan Wang, Gui-Qin Fu, Wei Li, Miao-yong Zhu (2021). Numerical Investigation of Hematite Flash Reduction-biomass Steam Gasification Coupling Process. ISIJ International.DOI
232. D. Jiang, Li-Feng Zhang, Miao-yong Zhu (2021). Center Segregation Evolution in Slab Continuous Casting with Mechanical Reduction: A 3D Simulation. Steel Research International.DOI
233. Ziwen Yan, Zhi-Yin Deng, Miao-yong Zhu, Liqiao Huo (2021). Effect of CaCl2 Addition on the Melting Behaviors of CaO-SiO2-FeOx Steelmaking Slag System. Metallurgical and Materials Transactions B.DOI
234. Mian-Guang Xu, Miao-yong Zhu (2021). Physical and computational study of a novel submerged entry nozzle design for twin-roll casting process. Journal of Iron and Steel Research International.DOI
235. Jing-Jing Ma, Wei Li, Gui-Qin Fu, Miao-yong Zhu (2021). Effect of Al2O3 on the Viscosity and Crystallization Behavior of CaO-SiO2-MgO-Al2O3-TiO2-Cr2O3 Slag. JOM.DOI
236. Zhenyu Niu, Zhao-Zhen Cai, Miao-yong Zhu (2021). Effect of Mold Cavity Design on the Thermomechanical Behavior of Solidifying Shell During Microalloyed Steel Slab Continuous Casting. Metallurgical and Materials Transactions B.DOI
237. Xiao-Feng Wang, Fu-Ping Tang, Zhen Li, Yong Tian, Jinsong Meng, Miao-yong Zhu, Y. Bao, Zhi-Yin Deng, Min Wang (2021). Development of a high-efficiency dephosphorization process via the fine in situ phases due to the composite ball explosion. Ironmaking & steelmaking.DOI
238. Tian-ci Chen, Qian Zhou, C. Ji, Guo-Rong Wu, Miao-yong Zhu (2021). Compression Deformation Mechanism and Constitutive Equation of Ti-Mo Steel in the Mushy Zone. Metallurgical and Materials Transactions B.DOI
239. Zong-Hui Liu, Guo-Dong Song, Zhi-Yin Deng, Miao-yong Zhu (2021). Evolution of Inclusions in Si-Mn-Killed Steel During Ladle Furnace (LF) Refining Process. Metallurgical and Materials Transactions B.DOI
240. Rui Guan, C. Ji, Tian-ci Chen, Miao-yong Zhu, Hong-Guang Li (2021). Formation Mechanism of Abnormal Martensite in the Welded Joint of the Bainitic Rail. Metallurgical and Materials Transactions B.DOI
241. Xin Wang, Shu-Guo Zheng, Miao-yong Zhu (2021). Optimization of the Structure and Injection Position of Top Submerged Lance in Hot Metal Ladle.DOI
242. Ziwen Yan, Zhi-Yin Deng, Miao-yong Zhu (2021). Effect of CaCl2 Addition on Phosphorus Distribution Between CaO–SiO2–FeOx–P2O5 Slag and Carbon-Saturated Iron at Steelmaking Temperature. Metallurgical and Materials Transactions B.DOI
243. Zi-jian Wei, C. Ji, Tian-ci Chen, Miao-yong Zhu, Chen-Hui Wu (2021). Metadynamic recrystallization and microstructure evolution of a continuously cast Ti-microalloyed steel slab with heavy reduction. Journal of Iron and Steel Research International.DOI
244. Jing-Jing Ma, Wei Li, Gui-Qin Fu, Miao-yong Zhu (2021). Effect of B2O3 on the Melting Temperature and Viscosity of CaO–SiO2–MgO–Al2O3–TiO2–Cr2O3 Slag. Journal of Sustainable Metallurgy.DOI
245. Zhenyu Niu, Zhao-Zhen Cai, Miao-yong Zhu (2021). Formation Mechanism of a Wide-Face Longitudinal Off-Corner Depression During Thick Slab Continuous Casting. Metallurgical and Materials Transactions B.DOI
246. Zhi-Yin Deng, Bo-Hwan Yang, Miao-yong Zhu (2021). Laboratory Study on the Sintering Behavior of Zircon‐Based Ladle Filler Sands. Steel Research International.DOI
247. Pengyu Dong, S. Zheng, Miao-yong Zhu (2021). Research on Nozzle Design and Application of Single‐Flow Postcombustion Oxygen Lance in a 120 t Top‐Blown Converter. Steel Research International.DOI
248. Xingnan Wang, Gui-Qin Fu, Wei Li, Miao-yong Zhu, Yongliang Gao, Xue-Gang Chen (2021). Effects of Biomass Properties on Hematite Flash Reduction-Biomass Steam Gasification Coupling Process. Journal of Sustainable Metallurgy.DOI
249. Wenguang Hu, C. Ji, Miao-yong Zhu (2021). Numerical Simulation of Continuous Casting Round Blooms with Different Solidification End Reduction Strategies. Metallurgical and Materials Transactions B.DOI
250. Zong-Hui Liu, Guo-Dong Song, Zhi-Yin Deng, Miao-yong Zhu (2021). Effect of slag adjustment on inclusions in Si–Mn-killed steel during ladle furnace (LF) refining process. Ironmaking & steelmaking.DOI
251. Ziwen Yan, Zhi-Yin Deng, Miao-yong Zhu (2021). Effect of CaCl2 Addition on the Viscosity of CaO–SiO2–FeOx Steelmaking Slag System. Metallurgical and Materials Transactions B.DOI
252. Ziwen Yan, Zhi-Yin Deng, Miao-yong Zhu (2021). Effect of CaCl2 Addition on Phosphorus Distribution in CaO–SiO2–FeOx–P2O5 Converter Slags. Steel Research International.DOI
253. Zhi-Yin Deng, Ziwen Yan, Miao-yong Zhu, Fu-Ping Tang (2021). Dephosphorisation behaviour of BOF crude steel using CaO-based flux. Ironmaking & steelmaking.DOI
254. Xiao-Feng Wang, Fu-Ping Tang, Zhen Li, Yong Tian, Jinsong Meng, Miao-yong Zhu, Y. Bao, Zhi-Yin Deng, Min Wang (2021). Desulphurisation with dispersed in-situ phases induced by composite ball explosive reaction during ultra-low carbon steel production in RH degasser. Ironmaking & steelmaking.DOI
255. Chao Liu, S. Zheng, Miao-yong Zhu (2021). Effect of Lance Design on Jet Characteristics in 250 t Converter. Steel Research International.DOI
256. Jin-Yuan Zhang, Chen-Hui Wu, C. Ji, Yi Chen, Miao-yong Zhu (2021). Evolution of Microporosities in Wide‐Thick Continuous Casting Slab during Heavy Reduction Process. Steel Research International.DOI
257. Yi-Ming Yang, Sen Luo, Peng Wang, Wei-Ling Wang, Miao-yong Zhu (2021). Multiphase Field Modeling of Dendritic Solidification of Low-Carbon Steel with Peritectic Phase Transition. Metallurgical and Materials Transactions B.DOI
258. Guoliang Li, C. Ji, Miao-yong Zhu (2021). Prediction of Internal Crack Initiation in Continuously Cast Blooms. Metallurgical and Materials Transactions B.DOI
259. Xiang-Ning Meng, Lei Cui, Yi Shi, Miao-yong Zhu (2021). A CA-LBM model for simulating dendrite growth with forced convection. Journal of Iron and Steel Research International.DOI
260. Bo-Na Yang, Zhi-Yin Deng, Miao-yong Zhu (2021). Effect of zircon addition on the sintering of chromite-based ladle filler sands. Ironmaking & steelmaking.DOI
261. Xingnan Wang, Gui-Qin Fu, Wei Li, Miao-yong Zhu (2021). Numerical Simulation of Flash Reduction of Iron Ore Particles with Biomass Syngas. ISIJ International.DOI
262. Xin Wang, Shu-Guo Zheng, Miao-yong Zhu (2021). Fluid flow, solidification and solute transport in billet continuous casting with different stirrer positions. Ironmaking & steelmaking.DOI
263. Zi-jian Wei, C. Ji, Tian-ci Chen, Miao-yong Zhu (2021). In Situ Observations and Microstructure Evolution Behavior of Static Recrystallization of Microalloyed Continuous Casting Slabs in a Solidification End Reduction Process.DOI
264. 朱苗勇（2020）. 新一代高效连铸智能化发展思考. 《第十届中国金属学会青年学术年会暨第四届辽宁青年科学家论坛》.DOI
265. 朱苗勇（2020）. 钢连铸过程流动与凝固传热行为数值模拟. 《2020中国铸造活动周论文集》.DOI
266. 刘宗辉，秦凤婷，任建忠，朱苗勇（2020）. LF两步造渣工艺对C82DA钢中硫和铝的影响. 《钢铁》.DOI
267. 郝广御，袁康，高静，邓志银，朱苗勇（2020）. 含钛齿轮钢中CaO-Al2O3-TiOx+TiN系夹杂物形成机理. 《钢铁》.DOI
268. Gui-Qin Fu, Dong-Liang Li, Jing-Jing Ma, Xin-Liang Gao, Miao-Yong Zhu (2020). Synergistic effect of sulfur dioxide and chloride on the corrosion of 3.55 wt% Ni weathering steel. Materials Research Express.DOI
269. Ruiqi Zeng, Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2020). Influence and Mechanism of CaO on the Oxidation Induration of Hongge Vanadium Titanomagnetite Pellets. ISIJ International.DOI
270. Zhi-Yin Deng, Zong-Hui Liu, Miao-yong Zhu, Liqiao Huo (2020). Formation, Evolution and Removal of MgO·Al2O3 Spinel Inclusions in Steel. ISIJ International.DOI
271. Zhao-Hui Wang, Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2020). Numerical Simulation of Solidification Structure of Continuously Cast Billet with Grain Motion. Metallurgical and Materials Transactions B.DOI
272. Zhi-Yin Deng, Lei Chen, Guo-Dong Song, Miao-yong Zhu (2020). Formation and Evolution of Non-metallic Inclusions in Ti-Bearing Al-Killed Steel During Secondary Refining Process. Metallurgical and Materials Transactions B.DOI
273. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2020). An effective and cleaner process to recovery iron, titanium, vanadium, and chromium from Hongge vanadium titanomagnetite with hydrogen-rich gases. Ironmaking & steelmaking.DOI
274. Sen Luo, Zong-Shuai Shen, Zongming Yu, Wei-Ling Wang, Miao-yong Zhu (2020). Effect of Ce Addition on Inclusions and Grain Structure in Gear Steel 20CrNiMo. Steel Research International.DOI
275. Ruiqi Zeng, Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2020). Influence of B2O3 on the Oxidation and Induration Process of Hongge Vanadium Titanomagnetite Pellets. ISIJ International.DOI
276. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2020). Investigation of the oxidation induration mechanism of Hongge vanadium titanomagnetite pellets with different Al2O3 additions.DOI
277. Sen Luo, Peng Wang, Wei-Ling Wang, Miao-yong Zhu (2020). PF-LBM Modelling of Dendritic Growth and Motion in an Undercooled Melt of Fe-C Binary Alloy. Metallurgical and Materials Transactions B.DOI
278. Xiao-Han Gao, Xiang-Ning Meng, Lei Cui, Kun Zhang, Yunfei Meng, Miao-yong Zhu (2020). An improved cellular automata model for TiN inclusion precipitation. Materials Research Express.DOI
279. Tian-ci Chen, C. Ji, Miao-yong Zhu (2020). Effect of cooling rate on the nucleation and growth of large TiC particles in Ti-Mo steel.DOI
280. Jing-Jing Ma, Wei Li, Gui-Qin Fu, Miao-yong Zhu (2020). Influence of Basicity on the Viscosity and Crystallization Characteristics of Chromium-containing High-titanium Slag. ISIJ International.DOI
281. Sheng-kui Yin, Sen Luo, Wen-Jie Zhang, Wei-Ling Wang, Miao-yong Zhu (2020). Numerical simulation of macrosegregation in continuously cast gear steel 20CrMnTi with final electromagnetic stirring. Journal of Iron and Steel Research International.DOI
282. Jing-Jing Ma, Gui-Qin Fu, Wei Li, Miao-yong Zhu (2020). Influence of TiO2 on the melting property and viscosity of Cr-containing high-Ti melting slag. International Journal of Minerals, Metallurgy, and Materials.DOI
283. Qian Zhou, C. Ji, Miao-yong Zhu (2020). Research on several constitutive models to predict the flow behaviour of GCr15 continuous casting bloom with heavy reduction. Materials Research Express.DOI
284. Jie Yang, Deng-Fu Chen, Miao-yong Zhu (2020). Crystallization and heat transfer of CaO–SiO2-based slag for high-Mn–high-Al steel. Journal of Iron and Steel Research International.DOI
285. Ruiqi Zeng, Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2020). Effect of Al2O3 on the gas-based direct reduction behavior of Hongge vanadium titanomagnetite pellet under simulated shaft furnace atmosphere.DOI
286. Rui Guan, C. Ji, Miao-yong Zhu (2020). Modeling the Effect of Combined Electromagnetic Stirring Modes on Macrosegregation in Continuous Casting Blooms. Metallurgical and Materials Transactions B.DOI
287. Hai-Cun Yu, Zhao-Zhen Cai, K. Ryom, Gui-Qin Fu, Miao-yong Zhu (2020). Behavior of V-Ti Elements in Warm-Rolled Transformation-Induced Plasticity Steel with Medium Manganese Content.DOI
288. Xingnan Wang, Gui-Qin Fu, Wei Li, Miao-yong Zhu (2020). Numerical simulation and optimization of flash reduction of iron ore particles with hydrogen-rich gases. Powder Technology.DOI
289. Jing-Jing Ma, Wei Li, Gui-Qin Fu, Miao-yong Zhu (2020). Viscous Flow Behaviors of Cr‐Bearing High‐Titanium Melting Slag with Different MgO Contents. Steel Research International.DOI
290. Zhiping Chen, Chengkui Wu, 程乃良, Ni Cheng, Miaoyong Zhu (2020). Application of Soft Reduction to Improve Internal Quality of Fine-Punched Steel. Iron & Steel Technology Conference and Exposition (AISTech).DOI
291. 彭朋，胡吕，邓志银，朱苗勇（2019）. 含锆氧化镁耐火材料对帘线钢中夹杂物的影响. 《材料与冶金学报》.DOI
292. 窦为学，雷洪，朱苗勇（2019）. 70 t单管RH冶金传输行为的数值模拟. 《中南大学学报(自然科学版)》.
293. 杨澈，杜涛，刘承军，储满生，潘晓林，娄太平，朱苗勇（2019）. 适应行业绿色智能化发展的冶金工程专业改革. 《中国冶金教育》.DOI
294. 邢飞，郑淑国，朱苗勇（2019）. 通道倾角对感应加热中间包影响的数值模拟. 《炼钢》.
295. 窦为学，郑淑国，邢飞，朱苗勇（2019）. 方坯连铸机中间包流场流动特性研究. 《铸造》.
296. 祭程，关锐，朱苗勇，吴国荣，陈天明，李红光（2019）. 重轨钢凝固末端机械压下对溶质偏析行为的影响. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
297. 郭壮群，罗森，张文杰，王卫领，朱苗勇（2019）. 大圆坯凝固末端电磁搅拌流动行为数值模拟. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
298. 王鹏，罗森，刘光光，王卫领，朱苗勇（2019）. 旋流情况下晶粒移动行为研究. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
299. 蔡兆镇，刘志远，王重君，赵佳伟，朱苗勇（2019）. 微合金钢高温板坯全连续淬火新技术开发及应用. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
300. 牛振宇，蔡兆镇，刘志远，王重君，陈长芳，朱苗勇（2019）. 板坯连铸结晶器窄面锥度对铸坯传热行为的影响. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
301. 朱苗勇，蔡兆镇，刘志远，王重君，赵佳伟（2019）. 高温板坯全连续淬火新技术开发及应用. 《第十二届中国钢铁年会论文集——大会特邀报告&分会场特邀报告》.DOI
302. 祭程，关锐，朱苗勇，吴国荣，陈天明，李红光（2019）. 重载铁路钢轨钢连铸重压下工艺研发及应用. 《钢铁研究学报》.DOI
303. 高晓晗，孟祥宁，崔磊，朱苗勇（2019）. 基于CA模型的多元合金微观组织模拟. 《第十二届中国钢铁年会论文集——2.炼钢与连铸》.DOI
304. 朱苗勇（2019）. 新一代高效连铸技术发展思考. 《钢铁》.DOI
305. 邓志银，戈文英，胡博文，陈磊，朱苗勇（2019）. 合金化对铝镇静钢中夹杂物的影响. 《钢铁》.DOI
306. 蔡兆镇，安家志，刘志远，牛振宇，朱苗勇（2019）. 微合金钢连铸坯角部裂纹控制技术研发及应用. 《钢铁研究学报》.DOI
307. Chen-Hui Wu, C. Ji, Miao-yong Zhu (2019). Deformation Behavior of Internal Porosity in Continuous Casting Wide-Thick Slab during Heavy Reduction. Metals.DOI
308. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2019). Influence of MgO on the oxidation and induration of Hongge vanadium titanomagnetite pellets. Ironmaking & steelmaking.DOI
309. Zhenyu Niu, Zhao-Zhen Cai, Miao-yong Zhu (2019). Heat transfer behaviour of funnel mould copper plates during thin slab continuous casting and channel structure optimization. Ironmaking & steelmaking.DOI
310. Zhi-Yin Deng, Liu Cheng, Lei Chen, Miao-yong Zhu (2019). Effect of Refractory on Nonmetallic Inclusions in Si–Mn‐Killed Steel. Steel Research International.DOI
311. Xingnan Wang, Gui-Qin Fu, Miao-yong Zhu (2019). Numerical analysis of the effects of magnetite properties and injection types on flash reduction behaviour. Ironmaking & steelmaking.DOI
312. Xin Wang, Shu-Guo Zheng, Miao-yong Zhu (2019). Numerical simulation on gas–liquid multiphase flow in hot metal ladle with top submerged lance. Ironmaking & steelmaking.DOI
313. Gui-Qin Fu, Wei Li, M. Chu, Miao-yong Zhu (2019). Influence Mechanism of SiO2 on the Oxidation Behavior and Induration Process of Hongge Vanadium Titanomagnetite Pellets. Metallurgical and Materials Transactions B.DOI
314. Fei Xing, Shu-Guo Zheng, Zong-hui Liu, Miao-yong Zhu (2019). Flow Field, Temperature Field, and Inclusion Removal in a New Induction Heating Tundish with Bent Channels. Metals.DOI
315. Xiao-Han Gao, Xiang-Ning Meng, Lei Cui, Miao-yong Zhu (2019). Cross-scale simulation for MnS precipitation of Fe-C alloy with cooling rate variation. Materials Research Express.DOI
316. Zhao-Hui Wang, Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2019). Cellular automaton modelling for the deflection of columnar grains of high-carbon steel with melt flow. Ironmaking & steelmaking.DOI
317. Jie Yang, Zhao-Zhen Cai, Deng-Fu Chen, Miao-yong Zhu (2019). Characteristics of Slag Infiltration in High-Mn Steel Castings. Metallurgical and Materials Transactions B.DOI
318. Sen Luo, Guangguang Liu, Peng Wang, Xiaohua Wang, Wei-Ling Wang, Miao-yong Zhu (2019). In Situ Observation and Phase-Field Modeling of Peritectic Solidification of Low-Carbon Steel. Metallurgical and Materials Transactions. A.DOI
319. Wei-Ling Wang, Zhao-Hui Wang, S. Yin, Sen Luo, Miao-yong Zhu (2019). Numerical simulation of solute undercooling influenced columnar to equiaxed transition of Fe-C alloy with cellular automaton. Computational materials science.DOI
320. Chen-Hui Wu, C. Ji, Miao-yong Zhu (2019). Influence of differential roll rotation speed on evolution of internal porosity in continuous casting bloom during heavy reduction. Journal of Materials Processing Technology.DOI
321. Chen-Hui Wu, C. Ji, Miao-yong Zhu (2019). Closure of Internal Porosity in Continuous Casting Bloom During Heavy Reduction Process. Metallurgical and Materials Transactions B.DOI
322. Zhenyu Niu, Zhao-Zhen Cai, Miao-yong Zhu (2019). Dynamic Distributions of Mold Flux and Air Gap in Slab Continuous Casting Mold. ISIJ International.DOI
323. Xin Wang, Shu-Guo Zheng, Zong-hui Liu, Miao-yong Zhu (2019). Numerical Simulation on Multiple Physical Fields Behaviors in Billet Continuous Casting with Different Stirrer Positions. Steel Research International.DOI
324. Wen-Jie Zhang, Sen Luo, Yao-Geng Chen, Wei-Ling Wang, Miao-yong Zhu (2019). Numerical Simulation of Fluid Flow, Heat Transfer, Species Transfer, and Solidification in Billet Continuous Casting Mold with M-EMS. Metals.DOI
325. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2019). Effect of porosity of Hongge vanadium titanomagnetite-oxidized pellet on its reduction swelling behavior and mechanism with hydrogen-rich gases. Powder Technology.DOI
326. Zhi-Yin Deng, Lingzhong Kong, Dongdong Liang, Miao-yong Zhu (2019). Reaction of Al‐Killed Manganese Steel with Ladle Slag. Steel Research International.DOI
327. Xingnan Wang, Gui-Qin Fu, Wei Li, Miao-yong Zhu (2019). Numerical simulation of effect of operating conditions on flash reduction behaviour of magnetite under H2 atmosphere. International journal of hydrogen energy.DOI
328. Rui Guan, C. Ji, Chen-Hui Wu, Miao-yong Zhu (2019). Numerical modelling of fluid flow and macrosegregation in a continuous casting slab with asymmetrical bulging and mechanical reduction. International Journal of Heat and Mass Transfer.DOI
329. Xingnan Wang, Gui-Qin Fu, Y. Qu, Miao-yong Zhu (2019). Flash Reduction Behavior of Magnetite Concentrate Particles in Methane–Nitrogen Atmospheres. Steel Research International.DOI
330. Wei-Ling Wang, S. Yin, Sen Luo, Miao-yong Zhu (2019). Recalescence and Segregation Phenomena During Equiaxed Dendritic Solidification of Fe-C Alloy. Metallurgical and Materials Transactions B.DOI
331. Xingnan Wang, Gui-Qin Fu, Wei Li, Miao-yong Zhu (2019). Numerical Analysis of Effect of Water Gas Shift Reaction on Flash Reduction Behavior of Hematite with Syngas. ISIJ International.DOI
332. Wei-Xue Dou, Guo Ding Yuan, Mengyi Lan, Yuanxiang Zhang, Miaoyong Zhu (2019). The Significance of Microstructure and Texture on Magnetic Properties of Non‐Oriented Silicon Steel: Strip Casting versus Conventional Process. steel research international.DOI
333. Dong Liang Jiang, Miaoyong Zhu, Lifeng Zhang (2019). Fluid Flow and Solidification Behavior in Slab Continuous Casting With Secondary Electromagnetic Stirring.DOI
334. Dongbin Jiang, Miaoyong Zhu, Lifeng Zhang (2019). Numerical Simulation of Solidification Behavior and Solute Transport in Slab Continuous Casting with S-EMS. Metals.DOI
335. 孔令种，邓志银，朱苗勇（2018）. 中高锰钢在真空精炼过程中的气化行为. 《特殊钢》.
336. 周素强，成旭东，姜东滨，张守伟，孙玉虎，朱苗勇（2018）. 邯钢中碳微合金钢板坯轻压下位置优化. 《中国冶金》.
337. 邓志银，周业连，朱苗勇（2018）. 铝镇静钢中夹杂物形态对其去除的影响. 《钢铁》.
338. 邢飞，郑淑国，朱苗勇（2018）. 新型感应加热中间包的数值模拟研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
339. 郑淑国，朱苗勇（2018）. 浇注钢包环出钢口吹氩新工艺去夹杂行为实验研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
340. 关锐，祭程，吴国荣，陈亮，李红光，朱苗勇，陈天明（2018）. 重载铁路钢轨钢连铸重压下工艺应用研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
341. 杨青山，孟祥宁，周建川，朱苗勇（2018）. 中薄板坯高拉速结晶器等速时长波形解析. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
342. 陈耀，罗森，王卫领，朱苗勇（2018）. 大方坯连铸结晶器电磁搅拌下钢液流动行为的数值模拟. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
343. 周建川，孟祥宁，杨青山，朱苗勇（2018）. 连铸结晶器熔渣组分影响振痕分析. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
344. 祭程，朱苗勇（2018）. 连铸坯凝固末端重压下技术的开发与应用. 《中国科协第350次青年科学家论坛——绿色高性能钢铁材料的关键技术》.
345. 安家志，蔡兆镇，牛振宇，朱苗勇，朱坦华，吕德文，刘建树（2018）. 二冷控冷工艺对薄板坯连铸过程组织析出及晶粒生长影响研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
346. 邓志银，孔令种，朱苗勇（2018）. 锰含量对铝镇静钢精炼过程夹杂物演变的影响. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
347. 朱苗勇，祭程，袁宏伟，张洪波（2018）. 连铸凝固末端重压下技术开发与应用. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
348. 杨锋功，邓志银，马玉强，迟云广，朱苗勇（2018）. 轴承钢铸坯中大型夹杂物来源分析. 《钢铁研究学报》.
349. 朱苗勇，娄文涛，王卫领（2018）. 炼钢与连铸过程数值模拟研究进展. 《金属学报》.
350. 周业连，邓志银，朱苗勇（2018）. 固/液态夹杂物穿过钢渣界面的分离机理. 《过程工程学报》.
351. 邓志银，朱苗勇（2018）. 合金钢中MnO/FeO大型夹杂物来源分析. 《钢铁》.
352. 周业连，邓志银，朱苗勇（2018）. 钢-渣界面液态夹杂物分离过程数值模拟. 《钢铁》.
353. 娄文涛，朱苗勇，程中福（2018）. 钢包底喷粉精炼新工艺技术的开发及应用. 《钢铁》.
354. 付贵勤，李东亮，朱苗勇（2018）. SO2对海洋大气环境中含铬耐候钢腐蚀行为的影响. 《钢铁》.
355. 娄文涛，刘壮，王晓雨，朱苗勇（2018）. 底吹氩钢包内渣-金反应及脱硫行为的数值模拟. 《钢铁》.
356. Xin-Liang Gao, Yao Xiao, Gui-Qin Fu, Dong Xu, Miao-Yong Zhu (2018). Mechanical Properties and Corrosion Behavior of Bridge Weathering Steels Containing 3.5% Ni. Metallurgist.DOI
357. Junliang Yang, Xiang-Ning Meng, Miao-yong Zhu (2018). Transient Thermo-fluid and Solidification Behaviors in Continuous Casting Mold: Oscillation Behaviors. ISIJ International.DOI
358. Lingzhong Kong, Zhi-Yin Deng, Miao-yong Zhu (2018). Reaction Behaviors of Al-Killed Medium-Manganese Steel with Different Refractories. Metallurgical and Materials Transactions B.DOI
359. Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2018). Influence of TiO2 addition on the oxidation induration and reduction behavior of Hongge vanadium titanomagnetite pellets with simulated shaft furnace gases.DOI
360. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2018). Influence of Cr 2 O 3 Addition on the Gas-Based Direct Reduction Behavior of Hongge Vanadium Titanomagnetite Pellet with Simulated Shaft Furnace Gases.DOI
361. Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2018). Effects of Preheating Temperature and Time of Hongge Vanadium Titanomagnetite Pellet on Its Gas-Based Direct Reduction Behavior with Simulated Shaft Furnace Gases.DOI
362. Qi Yang, C. Ji, Miao-yong Zhu (2018). Modeling of the Dynamic Recrystallization Kinetics of a Continuous Casting Slab Under Heavy Reduction. Metallurgical and Materials Transactions. A.DOI
363. Dong-Liang Li, Gui-Qin Fu, Miao-yong Zhu, Qing Li, C. Yin (2018). Effect of Ni on the corrosion resistance of bridge steel in a simulated hot and humid coastal-industrial atmosphere. International Journal of Minerals, Metallurgy, and Materials.DOI
364. C. Ji, Jun-lu Yao, Miao-yong Zhu (2018). Effect of Ostwald ripening of carbide particles on mechanical properties of SCM435 steel during subcritical annealing. Journal of Iron and Steel Research International.DOI
365. C. Ji, S. Deng, Rui Guan, Miao-yong Zhu (2018). Real‐Time Heat Transfer Model Based on Distributed Thermophysical Property Calculation for the Continuous Casting Process. Steel Research International.DOI
366. Lingzhong Kong, Zhi-Yin Deng, Liu Cheng, Miao-yong Zhu (2018). Reaction Behaviors of Al-Killed Medium-Manganese Steel with Glazed MgO Refractory. Metallurgical and Materials Transactions B.DOI
367. Yun-Guang Chi, Zhi-Yin Deng, Miao-yong Zhu (2018). Effect of Ladle Usage on Cleanliness of Bearing Steel. Metallurgical and Materials Transactions B.DOI
368. Chen-Hui Wu, C. Ji, Miao-yong Zhu (2018). Numerical Simulation of Bulging Deformation for Wide-Thick Slab Under Uneven Cooling Conditions. Metallurgical and Materials Transactions B.DOI
369. Rui Guan, C. Ji, Miao-yong Zhu, S. Deng (2018). Numerical Simulation of V-shaped Segregation in Continuous Casting Blooms Based on a Microsegregation Model. Metallurgical and Materials Transactions B.DOI
370. Wei-Ling Wang, C. Ji, Sen Luo, Miao-yong Zhu (2018). Modeling of Dendritic Evolution of Continuously Cast Steel Billet with Cellular Automaton. Metallurgical and Materials Transactions B.DOI
371. W. Lou, Xiao-Yu Wang, Zhuang Liu, Sen Luo, Miao-yong Zhu (2018). Numerical Simulation of Desulfurization Behavior in Ladle with Bottom Powder Injection. ISIJ International.DOI
372. Fei Xing, Shu-Guo Zheng, Miao-yong Zhu (2018). Motion and Removal of Inclusions in New Induction Heating Tundish.DOI
373. Xiang-Ning Meng, Xiao-Han Gao, Shuo Huang, Miao-yong Zhu (2018). Cross-Scale Modeling of MnS Precipitation for Steel Solidification. Metals.DOI
374. Hai-Cun Yu, Zhao-Zhen Cai, Gui-Qin Fu, Miao-yong Zhu (2018). Effect of V–Ti Addition on Microstructure Evolution and Mechanical Properties of Hot-Rolled Transformation-Induced Plasticity Steel. Acta Metallurgica Sinica.DOI
375. Shu-Guo Zheng, Miao-yong Zhu (2018). New Process with Argon Injected into Ladle around the Tapping Hole for Controlling Slag Carry-over during Continuous Casting Ladle. Metals.DOI
376. Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2018). Effect of V2O5 addition on the oxidation induration process of Hongge vanadium titanomagnetite pellet.DOI
377. D. Jiang, Wei-Ling Wang, Sen Luo, C. Ji, Miao-yong Zhu (2018). Numerical simulation of slab centerline segregation with mechanical reduction during continuous casting process. International Journal of Heat and Mass Transfer.DOI
378. Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2018). Effect of Cr2O3 addition on the oxidation induration mechanism of Hongge vanadium titanomagnetite pellets. International Journal of Minerals, Metallurgy, and Materials.DOI
379. C. Ji, Guoliang Li, Chen-Hui Wu, Miao-yong Zhu (2018). Design and Application of CSC-Roll for Heavy Reduction of the Bloom Continuous Casting Process. Metallurgical and Materials Transactions B.DOI
380. C. Ji, Zi-Lin Wang, Chen-Hui Wu, Miao-yong Zhu (2018). Constitutive Modeling of the Flow Stress of GCr15 Continuous Casting Bloom in the Heavy Reduction Process. Metallurgical and Materials Transactions B.DOI
381. Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2018). Cellular automaton modeling of dendritic growth of Fe-C binary alloy with thermosolutal convection.DOI
382. D. Jiang, Wei-Ling Wang, Sen Luo, Miao-yong Zhu (2018). Numerical Investigation of the Formation Mechanism and Control Strategy of Center Segregation in Continuously Casting Slab. Steel Research International.DOI
383. L. H. Feng, Miaoyong Zhu, X. B. Kang, L. Luo (2018). Simulation study on the solute elements micro-segregation at solid-liquid interface of continuous casting steel slab. DOAJ (DOAJ: Directory of Open Access Journals).
384. 李尉，付贵勤，储满生，朱苗勇（2017）. 红格钒钛磁铁矿氧化物相转变及非等温氧化动力学. 《东北大学学报(自然科学版)》.
385. 迟云广，邓志银，朱苗勇（2017）. 泡沫渣对120t转炉钢液脱氮的影响. 《特殊钢》.
386. 程中福，朱苗勇（2017）. 钢包底喷粉元件狭缝粗糙壁面对粉气流输送行为影响. 《东北大学学报(自然科学版)》.
387. 李东亮，付贵勤，朱苗勇（2017）. 低碳钢在湿热工业海洋大气中的腐蚀特征. 《工程科学学报》.
388. 李东亮，付贵勤，朱苗勇（2017）. 钙处理对桥梁钢耐大气腐蚀性能的影响. 《电化学(中英文)》.
389. 迟云广，邓志银，朱苗勇（2017）. 铝镇静钢中尖晶石夹杂物的生成. 《2017年全国高品质特殊钢生产技术研讨会论文摘要》.
390. 江中块，蔡兆镇，牛振宇，苏志坚，朱苗勇（2017）. 1650板坯压下过程热/力学行为及压下工艺优化. 《中国冶金》.DOI
391. 迟云广，邓志银，成刘，朱苗勇（2017）. 铝镇静钢中铝酸钙夹杂物的来源. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
392. 娄文涛，朱苗勇，王晓雨（2017）. 钢包底喷粉过程多相流传输及脱硫动力学的数值模拟. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
393. 周业连，邓志银，朱苗勇（2017）. 不同形态的夹杂物在钢-渣界面处的运动行为研究. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
394. 朱苗勇，祭程（2017）. 连铸重压下技术研究及其应用. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
395. 李东亮，付贵勤，朱苗勇，张贺佳（2017）. 湿热海洋大气中SO2污染对Q235B钢腐蚀行为的影响. 《钢铁》.
396. 郑淑国，朱苗勇（2017）. 钢包浇注过程环出钢口吹氩控制下渣新工艺的数学物理模拟. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
397. 郑淑国，刘煜，王玉峰，陆安粮，朱苗勇（2017）. 连铸过程控制下渣技术的研究进展. 《鞍钢技术》.
398. 王鑫，孟祥宁，黄烁，朱苗勇（2017）. 连铸板坯全冶金长度凝固形貌. 《中南大学学报(自然科学版)》.
399. 蔡兆镇，牛振宇，安家志，朱苗勇，张洪波，刘志远，王重君（2017）. 微合金钢连铸坯表面裂纹控制新工艺开发及应用. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
400. 邓志银，朱苗勇（2017）. 引流砂:钢中大型夹杂物的重要来源. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
401. 孔令种，邓志银，朱苗勇（2017）. 铝镇静中锰钢非金属夹杂物的演变行为. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
402. Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu（2017）. 模擬シャフト炉ガスによるHonggeバナジウムチタノマグネタイトペレットのガスによる直接還元挙動に及ぼすばい焼特性の影響【Powered by NICT】.
403. Wei Li, Gui-Qin Fu, Man-Sheng Chu, Miao-Yong Zhu (2017). Oxidation induration process and kinetics of Hongge vanadium titanium-bearing magnetite pellets.DOI
404. Wei Li, Gui-Qin Fu, M. Chu, Miao-Yong Zhu（2017）. Honggeバナジウムチタノマグネタイト酸化ペレットのガスベース直接還元および還元ペレットの融解分離【Powered by NICT】.
405. Yun-Guang Chi, Zhi-Yin Deng, Miao-yong Zhu (2017). Formation and Evolution of Non‐Metallic Inclusions during Deoxidation by Al Addition in BOF Crude Steel.DOI
406. Dong Xu, C. Ji, Hongyang Zhao, Dong-Hwi Ju, Miao-yong Zhu (2017). A new study on the growth behavior of austenite grains during heating processes. Scientific Reports.DOI
407. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2017). Influence of V2O5 Content on the Gas-Based Direct Reduction of Hongge Vanadium Titanomagnetite Pellets with Simulated Shaft Furnace Gases. JOM.DOI
408. Sen Luo, Bing-Yu Wang, Zhao-Hui Wang, D. Jiang, Wei-Ling Wang, Miao-yong Zhu (2017). Morphology of Solidification Structure and MnS Inclusion in High Carbon Steel Continuously Cast Bloom.DOI
409. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2017). Effect of reducing conditions on swelling behavior and mechanism of Hongge vanadium titanomagnetite-oxidized pellet with hydrogen-rich gases.DOI
410. W. Lou, Miao-yong Zhu (2017). A Mathematical Model for the Multiphase Transport and Reaction Kinetics in a Ladle with Bottom Powder Injection. Metallurgical and Materials Transactions B.DOI
411. Jie Yang, Zhao-Zhen Cai, Miao-yong Zhu (2017). Transient Thermo-fluid and Solidification Behaviors in Continuous Casting Mold: Evolution Phenomena.DOI
412. Ye-Lian Zhou, Zhi-Yin Deng, Miao-yong Zhu (2017). Study on the separation process of non-metallic inclusions at the steel−slag interface using water modeling. International Journal of Minerals, Metallurgy, and Materials.DOI
413. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2017). Reduction behavior and mechanism of Hongge vanadium titanomagnetite pellets by gas mixture of H2 and CO.DOI
414. Lingzhong Kong, Zhi-Yin Deng, Miao-yong Zhu (2017). Formation and Evolution of Non-metallic Inclusions in Medium Mn Steel during Secondary Refining Process.DOI
415. Chen-Hui Wu, C. Ji, Miao-yong Zhu (2017). Analysis of the Thermal Contraction of Wide‐Thick Continuously Cast Slab and the Weighted Average Method to Design a Roll Gap.DOI
416. D. Jiang, Miao-yong Zhu (2017). Center Segregation with Final Electromagnetic Stirring in Billet Continuous Casting Process. Metallurgical and Materials Transactions B.DOI
417. Mian-Guang Xu, Zhongyang Li, Zhao-Hui Wang, Miao-yong Zhu (2017). Computational and Experimental Study of the Transient Transport Phenomena in a Full-Scale Twin-Roll Continuous Casting Machine. Metallurgical and Materials Transactions B.DOI
418. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2017). Reduction Kinetics of Hongge Vanadium Titanomagnetite‐Oxidized Pellet with Simulated Shaft Furnace Gases.DOI
419. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2017). Non-isothermal Reduction Behavior and Mechanism of Hongge Vanadium Titanomagnetite Pellet with Simulated Shaft Furnace Gases.DOI
420. Wei Li, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2017). Gas‐Based Direct Reduction of Hongge Vanadium Titanomagnetite‐Oxidized Pellet and Melting Separation of the Reduced Pellet.DOI
421. D. Jiang, Wei-Ling Wang, Sen Luo, C. Ji, Miao-yong Zhu (2017). Mechanism of Macrosegregation Formation in Continuous Casting Slab: A Numerical Simulation Study. Metallurgical and Materials Transactions B.DOI
422. Wei-Ling Wang, Zhao-Hui Wang, Sen Luo, C. Ji, Miao-yong Zhu (2017). Influence of Forced Flow on the Dendritic Growth of Fe-C Alloy: 3D vs 2D Simulation. Metallurgical and Materials Transactions B.DOI
423. Wei Li, Nan-nan Wang, Gui-Qin Fu, M. Chu, Miao-yong Zhu (2017). Influence of roasting characteristics on gas-based direct reduction behavior of Hongge vanadium titanomagnetite pellet with simulated shaft furnace gases.DOI
424. Miao-yong Zhu, W. Lou, Wei-Ling Wang (2017). Research Progress of Numerical Simulation in Steelmaking and Continuous Casting Processes.DOI
425. Junliang Yang, Xiang-Ning Meng, Ning Wang, Miao-yong Zhu (2017). Oscillation-Mark Formation and Liquid-Slag Consumption in Continuous Casting Mold. Metallurgical and Materials Transactions B.DOI
426. 王国栋，朱苗勇，王昭东，刘振宇，李建平，韩跃新（2016）. 2011协同创新结硕果——钢铁关键共性技术研发进展. 《2016年全国轧钢生产技术会议》.DOI
427. 周业连，朱苗勇（2016）. 底吹氩钢包中非金属夹杂物在钢渣界面处的行为研究. 《第八届中国金属学会青年学术年会论文集》.
428. 汪宁，孟祥宁，朱苗勇（2016）. 连铸结晶器初凝坯壳摩擦行为分析. 《第十九届（2016年）全国炼钢学术会议大会报告及论文摘要集》.
429. 宋景欣，蔡兆镇，朱苗勇（2016）. 连铸板坯结晶器内凝固坯壳裂纹敏感性研究. 《铸造技术》.
430. 郑淑国，朱苗勇（2016）. 连铸中间包内钢液流动特性分析模型的研究进展. 《鞍钢技术》.
431. 李东亮，付贵勤，朱苗勇（2016）. 湿热工业海洋大气中Si对桥梁钢腐蚀行为的影响. 《中国腐蚀与防护学报》.
432. 左晓静，林仁敢，汪宁，孟祥宁，朱苗勇（2016）. 低碳钢和中碳钢连铸方坯初始凝固的对比研究. 《工程科学学报》.
433. 周业连，朱苗勇，刘建斌，陈晶晶，郑淑国（2016）. 吹氩精炼钢包内非金属夹杂物去除机理. 《钢铁》.
434. 程中福，朱苗勇（2016）. 精炼钢包缝隙式透气砖内钢液渗透行为. 《钢铁》.
435. 李东亮，付贵勤，朱苗勇（2016）. 湿热工业-海洋大气中铝对桥梁钢耐蚀性的影响. 《腐蚀与防护》.
436. 孟祥宁，林仁敢，杨杰，朱苗勇（2016）. 结晶器振动对连铸坯初始裂纹形成影响. 《东北大学学报(自然科学版)》.
437. 汪宁，孟祥宁，杨杰，左晓静，朱苗勇（2016）. 连铸振动结晶器内液态保护渣消耗机理. 《钢铁研究学报》.
438. 朱苗勇（2016）. 现代冶金工艺学 钢铁冶金卷.
439. Xin-Liang Gao, Yi Han, Gui-Qin Fu, Miao-Yong Zhu, Xing-Zhong Zhang（2016）. 塩化物イオンを含む環境における炭素鋼と耐候性鋼のさび層の進化【Powered by NICT】.
440. Dongliang Li, Gui-Qin Fu, Miao-yong Zhu (2016). Effect of Si on Corrosion Behavior of Model Bridge Steels by Alternative Wetting/drying Test in an Artificial Medium Simulated Hot and Humid Atmosphere of Marine and Industrial Area.DOI
441. C. Ji, Chen-Hui Wu, Miao-yong Zhu (2016). Thermo-Mechanical Behavior of the Continuous Casting Bloom in the Heavy Reduction Process.DOI
442. Dong Xu, B. Zheng, Miao-yong Zhu, Hongyang Zhao (2016). Meta-Dynamic Recrystallization Behavior of SCM435 Steel. Metallurgist.DOI
443. Wei-Ling Wang, Sen Luo, Miao-yong Zhu (2016). Numerical Simulation of Three-Dimensional Dendritic Growth of Alloy: Part I—Model Development and Test. Metallurgical and Materials Transactions. A.DOI
444. Zhong-Fu Cheng, Miao-yong Zhu (2016). Penetration behavior of molten steel into slot plug used for refining ladles.
445. Shu-Guo Zheng, Miao-yong Zhu (2016). Modelling Effect of Circulation Flow Rate on Inclusion Removal in RH Degasser.DOI
446. Wei-Ling Wang, Sen Luo, Miao-yong Zhu (2016). Numerical Simulation of Three-Dimensional Dendritic Growth of Alloy: Part II—Model Application to Fe-0.82WtPctC Alloy. Metallurgical and Materials Transactions. A.DOI
447. Zhi-Yin Deng, Miao-yong Zhu, Ye-Lian Zhou, Si-Chen Du (2016). Attachment of Alumina on the Wall of Submerged Entry Nozzle During Continuous Casting of Al-Killed Steel. Metallurgical and Materials Transactions B.DOI
448. Yi Feng, Wei-Ling Wang, Qi He, Sen Luo, Miao-yong Zhu (2016). A Novel Investigation of Initial Solidified Shell Thickness of Continuously Cast Slab Based on Solidification Structure.DOI
449. Shu-Guo Zheng, Miao-yong Zhu, Ye-Lian Zhou, Wang Su (2016). Flow Characteristics and Inclusion Removal in a Ten-strand Continuous Casting Tundish: Physical Modelling and Industrial Trials.DOI
450. Shu-Guo Zheng, Miao-yong Zhu (2016). Optimization of flow control devices in a ten-strand billet caster tundish.DOI
451. Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2016). Validation and Simulation of Cellular Automaton Model for Dendritic Growth during the Solidification of Fe–C Binary Alloy with Fluid Flow.DOI
452. Dong Xu, B. Zheng, Xin-Liang Gao, Miao-yong Zhu (2016). Diffusion Behavior of Carbon Atoms in Austenite Region of SCM435 Steel.DOI
453. Zhong-Fu Cheng, Miao-yong Zhu（2016）. 精錬とりべに使用するスロットプラグへの溶鋼の浸透挙動【Powered by NICT】.
454. Jie Yang, Miao-yong Zhu (2016). Evolution of Compositions and Properties of CaO–SiO2 Based Mold Flux for Continuous Casting High Mn Steel.DOI
455. Wei-Ling Wang, Sen Luo, Miao-yong Zhu (2016). Development of a CA-FVM Model with Weakened Mesh Anisotropy and Application to Fe–C Alloy.DOI
456. Zhao-Zhen Cai, Miao-yong Zhu (2016). Simulation of Heat Transfer in SLAB Continuous Casting Mold and New Formation Mechanism of Shell Hot Spots.DOI
457. Sen Luo, Wei-Ling Wang, Miao-yong Zhu (2016). Numerical Simulation of Dendritic Growth of Fe-C Binary Alloy with Natural Convection.DOI
458. Gui-Qin Fu, Miao-yong Zhu, Xin‐liang Gao (2016). Rust Layer Formed on Low Carbon Weathering Steels with Different Mn, Ni Contents in Environment Containing Chloride Ions.DOI
459. Wei-Ling Wang, Sen Luo, Miao-yong Zhu (2016). Performance Optimization and Evaluation of a 3D CA-FVM Model for Dendritic Growth of Fe-C Alloy.DOI
460. Xin-Liang Gao, Yi Han, Gui-Qin Fu, Miao-yong Zhu, Xing-Zhong Zhang (2016). Evolution of the Rust Layers Formed on Carbon and Weathering Steels in Environment Containing Chloride Ions. Acta Metallurgica Sinica.DOI
461. Mian-Guang Xu, Miao-yong Zhu (2016). Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification During the Twin-Roll Continuous Casting of Steel and Aluminum. Metallurgical and Materials Transactions B.DOI
462. C. Ji, Chen-Hui Wu, Miao-yong Zhu (2016). Influence of Heavy Reduction (HR) on the Internal Quality of the Bearing Steel GCr15 Bloom.DOI
463. Zhi-Yin Deng, Miao-yong Zhu, Si-Chen Du (2016). Effect of Refractory on Nonmetallic Inclusions in Al-Killed Steel. Metallurgical and Materials Transactions B.DOI
464. Ning Wang, Xiang-Ning Meng, Jie Yang, Xiao-Jing Zuo, Miao-yong Zhu（2016）. 連続鋳造振動鋳型内の液体フラックスの消費機構【JST・京大機械翻訳】.
465. D. Jiang, Miaoyong Zhu (2016). Solidification Structure and Macrosegregation of Billet Continuous Casting Process with Dual Electromagnetic Stirrings in Mold and Final Stage of Solidification: A Numerical Study. Metallurgical and Materials Transactions B.DOI
466. 罗森，王卫领，朱苗勇（2015）. Fe-C二元合金凝固过程强制对流作用下柱状晶生长行为的数值模拟. 《重庆大学学报》.
467. 孟祥宁，汪宁，朱苗勇（2015）. 结晶器渣圈对渣道压力、振痕及渣耗影响的分析. 《鞍钢技术》.
468. 杨顺虎，朱苗勇，王忠英（2015）. 控轧控冷工艺参数对风电法兰用钢Q345E低温冲击韧性的影响. 《特殊钢》.
469. 周业连，何奇，邓志银，周剑丰，朱苗勇（2015）. 210t BOF-RH-板坯CC流程钢包顶渣改质处理对超低碳钢夹杂物的影响. 《特殊钢》.
470. 邱木生，祭程，朱苗勇，徐东（2015）. 冷却速率和奥氏体化温度对40Cr钢球化退火的影响. 《工程科学学报》.
471. 林仁敢，孟祥宁，朱苗勇（2015）. 基于力学行为分析的连铸坯初始缺陷形成机理研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
472. 朱苗勇（2015）. 连铸坯的偏析及其控制 = Segregation of continuously cast strand and its control technology. 《冶金工业出版社》.
473. 林仁敢，孟祥宁，朱苗勇（2015）. 振动结晶器内凝固前沿初始裂纹形成力学扰动分析. 《连铸》.
474. 杨顺虎，朱苗勇，王忠英（2015）. 铸坯碳偏析对Q345E低温冲击性能的影响. 《钢铁》.
475. 朱苗勇，祭程（2015）. 连铸大方坯凝固末端重压下技术及其应用. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”论文集》.
476. Gui-Qin Fu, Duo Jin, Miao-Yong Zhu (2015). Effect of austenitizing temperature on the microstructure and mechanical properties of Nb – Ti microalloyed steel.DOI
477. Peng-Jie Hu, Hui Zhang, Ming-lin Wang, Xing-Zhong Zhang, Miao-yong Zhu (2015). Flow behavior and deformation of Nb micro-alloyed steel during strip hot rolling.DOI
478. D. Jiang, Miao-yong Zhu (2015). Flow and Solidification in Billet Continuous Casting Machine with Dual Electromagnetic Stirrings of Mold and the Final Solidification.DOI
479. Peng-Jie Hu, Hui Zhang, Ming-lin Wang, Miao-yong Zhu, Xing-Zhong Zhang, Yifei Zhang, Z. Zhang (2015). Application of a chamfered mold to improve corner defects of HSLA during slab continuous casting.DOI
480. Mian-Guang Xu, Miao-yong Zhu, Guo-Dong Wang (2015). Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in a Twin-Roll Strip Continuous Casting Machine. Metallurgical and Materials Transactions B.DOI
481. Zhong-Fu Cheng, Miao-yong Zhu (2015). Analyzing the effect of wall roughness on gas–particle flow in confined channels based on a virtual-wall-group concept.DOI
482. D. Jiang, Miao-yong Zhu (2015). The Fluid Flow and Solidification Phenomenon in Billet Continuous Casting Process with Mold and Final Electromagnetic Stirrings.DOI
483. Dong Xu, B. Zheng, Miao-yong Zhu, Hongyang Zhao (2015). Evolution of Dynamically Recrystallized Grains in Steel SCM435. Metallurgist.DOI
484. W. Lou, Miao-yong Zhu (2015). Numerical Sumulation of Desulfurization Behavior in Gas-Stirred Ladles.DOI
485. Miao-yong Zhu, Mian-Guang Xu, Sen Luo (2015). The Design of New Submerged Entry Nozzles for Beam‐Blank Continuous Casting.DOI
486. Xiang-Ning Meng, Ren-gan Lin, Junliang Yang, Xiao-Wei Zuo, Miao-yong Zhu (2015). Analysis on Initial Defects Based on Mechanical State of Meniscus Shell.DOI
487. Mian-Guang Xu, Miao-yong Zhu (2015). Transport Phenomena in a Beam-Blank Continuous Casting Mold with Two Types of Submerged Entry Nozzle.DOI
488. W. Lou, Miao-yong Zhu (2015). Numerical Simulation of Slag-metal Reactions and Desulfurization Efficiency in Gas-stirred Ladles with Different Thermodynamics and Kinetics.DOI
489. C. Ji, Lei Wang, Miao-yong Zhu (2015). Effect of Subcritical Annealing Temperature on Microstructure and Mechanical Properties of SCM435 Steel.DOI
490. 朴峰云，郑淑国，朱苗勇（2014）. 145t RH真空精炼装置内钢液循环流动特性的水模型研究. 《特殊钢》.
491. 王国栋，吴迪，朱苗勇，王昭东，刘振宇，李建平（2014）. 后工业化时代的生态化轧钢工艺技术:钢铁共性技术协同创新中心工艺与装备开发平台简介. 《中国冶金》.
492. 王志成，王卫领，罗森，朱苗勇（2014）. 新型连铸结晶器冷却结构的铜板热-力学行为. 《中国有色金属学报》.
493. 罗森，徐绵广，朱苗勇，李金波（2014）. 异型坯连铸结晶器内钢液流动和凝固坯壳生长数值模拟. 《第十八届（2014年）全国炼钢学术会议论文集——S06：凝固与连铸》.
494. 李士琦，朱苗勇，张延玲（2014）. 冶金反应工程分学科发展研究. 《2012—2013冶金工程技术学科发展报告》.
495. 任三兵，朱苗勇，樊俊飞（2014）. 薄带连铸新型布流系统的数学物理模拟. 《东北大学学报(自然科学版)》.
496. 付贵勤，李青，金铎，朱苗勇（2014）. 析出物对低合金耐候钢先驱奥氏体组织及轧材组织的影响. 《第十八届（2014年）全国炼钢学术会议论文集——S06：凝固与连铸》.
497. 任三兵，朱苗勇，樊俊飞，方园（2014）. 薄带连铸槽型布流系统的特性研究. 《连铸》.
498. 宋景欣，朱苗勇，周丽萍，黄绪传，穆海玲（2014）. 梅钢高碳钢42CrMo4常规板坯凝固组织及工艺研究. 《第十八届（2014年）全国炼钢学术会议论文集——S06：凝固与连铸》.
499. Gui-Qin Fu, Jin Duo, Xin‐liang Gao, Li Qing, Miao-Yong Zhu (2014). Effect of Mn, Ni Contents on Microstructure and Rust Layer of Bridge Weathering Steels Under Atmosphere Containing Cl‐1.DOI
500. W. Lou, Miao-yong Zhu (2014). Numerical Simulations of Inclusion Behavior and Mixing Phenomena in Gas-stirred Ladles with Different Arrangement of Tuyeres.DOI
501. W. Lou, Miao-yong Zhu (2014). Numerical Simulation of Desulfurization Behavior in Gas-Stirred Systems Based on Computation Fluid Dynamics–Simultaneous Reaction Model (CFD–SRM) Coupled Model. Metallurgical and Materials Transactions B.DOI
502. C. Ji, Sen Luo, Miao-yong Zhu (2014). Analysis and Application of Soft Reduction Amount for Bloom Continuous Casting Process.DOI
503. Sen Luo, Miao-yong Zhu, Wei-Ling Wang, Shu-Guo Zheng, Fan Xu (2014). Characteristics of Solidification Structure of Wide‐Thick Slab of Steel Q345.DOI
504. J. Song, Zhao-Zhen Cai, Feng-Yun Piao, Miao-yong Zhu (2014). Heat Transfer and Deformation Behavior of Shell Solidification in Wide and Thick Slab Continuous Casting Mold.DOI
505. Zhao-Zhen Cai, Miao-yong Zhu (2014). Non-uniform heat transfer behavior during shell solidification in a wide and thick slab continuous casting mold. International Journal of Minerals, Metallurgy, and Materials.DOI
506. Zhi-Yin Deng, Miao-yong Zhu (2014). Deoxidation Mechanism of Al-Killed Steel during Industrial Refining Process.DOI
507. Wei-Ling Wang, Sen Luo, Miao-yong Zhu (2014). Numerical Simulation of Dendritic Growth of Continuously Cast High Carbon Steel. Metallurgical and Materials Transactions. A.DOI
508. Zhong-Fu Cheng, Miao-yong Zhu (2014). Theoretical Analysis and Experiment of Liquid Metal Penetration into Slot Plug Applied for Refining Ladles. Metallurgical and Materials Transactions B.DOI
509. Wei-Ling Wang, Sen Luo, Miao-yong Zhu (2014). Dendritic growth of high carbon iron-based alloy under constrained melt flow.DOI
510. Junliang Yang, Xiang-Ning Meng, Miao-yong Zhu (2014). Experimental Study on Mold Flux Lubrication for Continuous Casting.DOI
511. Zhi-Yin Deng, Miao-yong Zhu, B. Zhong, Si-Chen Du (2014). Attachment of Liquid Calcium Aluminate Inclusions on Inner Wall of Submerged Entry Nozzle during Continuous Casting of Calcium-Treated Steel.DOI
512. Wang Su, Wei-Ling Wang, Sen Luo, D. Jiang, Miao-yong Zhu (2014). Heat Transfer and Central Segregation of Continuously Cast High Carbon Steel Billet.DOI
513. C. Ji, Sen Luo, Miao-yong Zhu, Y. Sahai (2014). Uneven Solidification during Wide-thick Slab Continuous Casting Process and its Influence on Soft Reduction Zone.DOI
514. Sen Luo, Feng-Yun Piao, D. Jiang, Wei-Ling Wang, Miao-yong Zhu (2014). Numerical Simulation and Experimental Study of F-EMS for Continuously Cast Billet of High Carbon Steel.DOI
515. Peng-Jie Hu, Hui Zhang, Xing-Zhong Zhang, Miao-yong Zhu (2014). Application of a Corner Chamfer to Steel Billets to Reduce Risk of Internal Cracking during Casting with Soft Reduction.DOI
516. 程中福，朱苗勇（2013）. 钢包底喷粉透气砖中粉剂颗粒运动轨迹的数值计算. 《第十七届（2013年）全国冶金反应工程学学术会议》.
517. 徐东，朱苗勇，唐正友，刘振民（2013）. SCM435钢奥氏体连续冷却转变行为. 《东北大学学报(自然科学版)》.
518. 徐东，祭程，朱苗勇，唐正友（2013）. 步进式加热炉内钢坯加热过程的模拟研究. 《东北大学学报(自然科学版)》.
519. Xiang-Ning Meng, Miao-yong Zhu (2013). Effect of cooling structure on thermal behavior of copper plates of slab continuous casting mold. Journal of Central South University.DOI
520. 李士琦，朱苗勇，张延玲（2013）. 冶金反应工程分学科发展近况. 《第十七届（2013年）全国冶金反应工程学学术会议论文集（上册）》.
521. 付贵勤，李青，金铎，隋晓亮，朱苗勇（2013）. 加热温度对耐候桥梁钢组织及性能影响. 《第十七届（2013年）全国冶金反应工程学学术会议论文集（上册）》.
522. Xu Dong, Miaoyong Zhu, Zhengyou Tang, Chao Sun (2013). Determination of the dynamic recrystallization kinetics model for SCM435 steel. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
523. 徐东，朱苗勇，祭程，唐正友（2013）. 工艺因素对SCM435钢大方坯凝固组织的影响. 《材料与冶金学报》.
524. 徐东，朱苗勇，唐正友，祭程，张素萍，姜涛（2013）. SCM435钢的相变模型. 《哈尔滨工程大学学报》.
525. 王志成，王卫领，姜东滨，罗森，朱苗勇（2013）. 宽厚板连铸结晶器内钢液初始凝固行为. 《第九届中国钢铁年会论文集》.
526. 付贵勤，高新亮，金铎，朱苗勇（2013）. 含Cl -1 环境下Mn对低合金耐候桥梁钢腐蚀性能影响. 《第十七届（2013年）全国炼钢学术会议》.
527. 徐东，祭程，唐正友，朱苗勇（2013）. SCM435钢贝氏体中碳原子的扩散行为. 《过程工程学报》.
528. 苏旺，姜东滨，罗森，朱苗勇（2013）. 方坯连铸凝固末端电磁搅拌工艺优化的数值模拟. 《东北大学学报(自然科学版)》.
529. 王卫领，蔡兆镇，朱苗勇（2013）. 包晶钢宽厚板坯连铸结晶器的热流密度与热行为. 《工程科学学报》.
530. 邓志银，朱苗勇，钟保军，田新中，胡黎宁（2013）. 精炼过程镁铝尖晶石夹杂物的生成. 《第九届中国钢铁年会论文集》.
531. 姜东滨，王卫领，罗森，朱苗勇，谢世正，肖爱达（2013）. 板坯连铸二冷区电磁搅拌过程数值模拟研究. 《第九届中国钢铁年会论文集》.
532. 邓志银，朱苗勇，钟保军，田新中，胡黎宁（2013）. 超低氧洁净钢的精炼渣碱度选择. 《第十七届（2013年）全国炼钢学术会议论文集（A卷）》.
533. 杨顺虎，朱苗勇（2013）. 风电法兰用钢低温冲击性能研究. 《第十七届（2013年）全国炼钢学术会议论文集（B卷）》.
534. 罗森，姜东滨，王卫领，朱苗勇，苏旺，蒋鲤平，刘宪民（2013）. 高碳钢小方坯连铸凝固末端电磁搅拌工艺研究. 《第十七届（2013年）全国炼钢学术会议论文集（A卷）》.
535. 蔡兆镇，王志成，吴晨辉，朱苗勇（2013）. 宽厚板坯连铸结晶器内坯壳传热与变形行为研究. 《第十七届（2013年）全国炼钢学术会议论文集（A卷）》.
536. 杨杰，孟祥宁，朱苗勇（2013）. 基于振动模拟试验的连铸结晶器熔渣消耗研究. 《第十七届（2013年）全国冶金反应工程学学术会议论文集（上册）》.
537. W. Lou, Miao-yong Zhu (2013). Numerical Simulation of Gas and Liquid Two-Phase Flow in Gas-Stirred Systems Based on Euler–Euler Approach. Metallurgical and Materials Transactions B.DOI
538. Zhi-Yin Deng, Miao-yong Zhu (2013). Formation and Evolution of Spinel Inclusions during Al-Killed Steel Refining.DOI
539. W. Lou, Miao-yong Zhu (2013). Numerical Simulations of Inclusion Behavior in Gas-Stirred Ladles. Metallurgical and Materials Transactions B.DOI
540. Miao-yong Zhu, Zhong-Fu Cheng, 娄文涛 (2013). Bottom powder spraying/vacuum degassing molten steel refining device and method.
541. Miao-yong Zhu, Zhao-Zhen Cai, Hai-Qi Yu (2013). Multiphase Flow and Thermo-Mechanical Behaviors of Solidifying Shell in Continuous Casting Mold.DOI
542. C. Ji, Zhao-Zhen Cai, Miao-yong Zhu, Y. Sahai (2013). Study on Prevention of Wide‐Thick Slab Transverse Cracks by Optimizing the Secondary Cooling Nozzles.DOI
543. Sen Luo, Miao-yong Zhu (2013). Numerical Simulation of Solute Diffusion–Controlled Dendritic Growth with Cellular Automaton Method.DOI
544. W. Lou, Miao-yong Zhu (2013). Numerical Simulations of Non-Metallic Inclusions Behavior in Gas-Stirred Ladle.DOI
545. Zhi-Yin Deng, Miao-yong Zhu, B. Zhong, Yong-Gang Dai (2013). Effect of Basicity on Deoxidation Capability of Refining Slag.DOI
546. Zhao-Zhen Cai, Miao-yong Zhu (2013). Thermo-mechanical Behavior of Peritectic Steel Solidifying in Slab Continuous Casting Mold and A New Mold Taper Design.DOI
547. Miao-yong Zhu, Zhao-Zhen Cai (2013). Thermo‐mechanical Behavior and Cracking Susceptibility of Solidifying Shell in Continuous Casting Mold.DOI
548. Zhong-Fu Cheng, Miao-yong Zhu (2013). Motion Charateristics of a Powder Particle Through the Injection Device with Slats at Finite Reynolds Number.DOI
549. Zhi-Yin Deng, Miao-yong Zhu (2013). A New Double Calcium Treatment Method for Clean Steel Refining.DOI
550. Zhi-Yin Deng, Miao-yong Zhu (2013). Evolution Mechanism of Non-metallic Inclusions in Al-Killed Alloyed Steel during Secondary Refining Process.DOI
551. Xiang-Ning Meng, Wei-Ling Wang, Miao-yong Zhu, R. Suzuki (2013). Deformation Simulation of Copper Plates of Slab Continuous Casting Mold.DOI
552. Wei-Ling Wang, Sen Luo, Zhao-Zhen Cai, Miao-yong Zhu (2013). The Effect of Phosphorus and Sulfur on the Crack Susceptibility of Continuous Casting Steel.DOI
553. Xin-Liang Gao, Miao-yong Zhu, Chao Sun, Gui-Qin Fu (2013). Dynamic Recrystallization Behavior and Microstructure Evolution of Bridge Weathering Steel in Austenite Region.DOI
554. Miao-yong Zhu (2013). Diffusion Behavior of Carbon Atoms in Bainite of SCM435 Steel.
555. 邓志银，朱苗勇，钟保军，高新亮（2012）. 不同脱氧方式对钢中夹杂物的影响. 《工程科学学报》.
556. 高新亮，付贵勤，朱苗勇，邓志银（2012）. 低合金耐候钢在含氯离子环境中的腐蚀行为. 《工程科学学报》.
557. 邓志银，朱苗勇，钟保军，戴永刚（2012）. 不同碱度精炼渣的冶金性能. 《东北大学学报(自然科学版)》.
558. 徐东，朱苗勇，唐正友，王壮飞，张素萍，姜涛（2012）. SCM435钢的拉伸实验研究. 《材料与冶金学报》.
559. 杨杰，孟祥宁，朱苗勇（2012）. 高拉速板坯连铸结晶器弯月面渣道压力研究. 《2012年炼钢—连铸高品质洁净钢生产技术交流会》.
560. 蔡兆镇，祭程，王卫领，朱苗勇（2012）. 宽厚板坯连铸结晶器内凝固坯壳裂纹敏感性研究. 《2012年微合金钢连铸裂纹控制技术研讨会论文集》.
561. 祭程，蔡兆镇，罗森，侯葵，巩文旭，朱苗勇（2012）. 微合金钢宽厚板连铸坯角部横裂纹控制技术研究. 《2012年微合金钢连铸裂纹控制技术研讨会》.
562. 祭程，蒋毅，肖文忠，朱苗勇，曹学欠，谭建平（2012）. 连铸拉矫机辊缝在线标定方法研究与应用. 《中国冶金》.
563. 孟祥宁，王卫领，朱苗勇（2012）. 冷却结构对连铸结晶器铜板应力分布的影响. 《中国有色金属学报》.
564. 王朝阳，巩文旭，贺建哲，郑淑国，朱苗勇（2012）. 精炼钢包底吹氩性能优化物理模拟研究. 《中国冶金》.
565. 潘贻芳，蔡兆镇，祭程，朱苗勇，侯葵（2012）. 宽厚板坯连铸结晶器渣道内热行为研究. 《铸造技术》.
566. 徐东，朱苗勇，祭程，唐正友（2012）. SCM435钢大方坯凝固过程组织的模拟. 《材料科学与工艺》.
567. 潘贻芳，祭程，张晓博，蔡兆镇，罗森，朱苗勇（2012）. 宽厚板坯连铸二冷工艺开发与应用. 《中国冶金》.
568. 王朝阳，祭程，巩文旭，朱苗勇（2012）. 含硼钢板坯边角裂纹的成因与控制. 《钢铁》.
569. 孟祥宁，王卫领，朱苗勇（2012）. 冷却结构对连铸结晶器铜板热变形的影响. 《工程科学学报》.
570. Gui-Qin Fu, Zheng-Hai Xia, Yong-Dong Zhang, Bo Cao, Miao-Yong Zhu, Xin-Liang Gao (2012). High-performance bridge weathering steel containing Mo and preparation method thereof.
571. Sen Luo, Miao-yong Zhu, S. Louhenkilpi (2012). Numerical Simulation of Solidification Structure of High Carbon Steel in Continuous Casting Using Cellular Automaton Method.DOI
572. Shu-Guo Zheng, Miao-yong Zhu, Zhong-Fu Cheng (2012). Experimental Study on the Behavior of Slag Entrapment and Inclusion Removal in 441 Ladle with Argon Blowing.DOI
573. Xiang-Ning Meng, Miao-yong Zhu (2012). Effect of Casting Speed on Temperature Difference between Copper Plate and Solidifying Shell in Meniscus of Slab Continuous Casting Mold.DOI
574. Wei-Ling Wang, Miao-yong Zhu, Zhao-Zhen Cai, Sen Luo, C. Ji (2012). Micro‐Segregation Behavior of Solute Elements in the Mushy Zone of Continuous Casting Wide‐Thick Slab.DOI
575. Xiang-Ning Meng, Wei-Ling Wang, Miao-yong Zhu (2012). Effect of Cooling Structure on Stress Distribution of Copper Plates of Slab Continuous Casting Mold.DOI
576. Miao-yong Zhu (2012). Corrosion behavior of low-alloy weathering steel in environment containing chloride ions.
577. 邓志银，高新亮，汪锋，付贵勤，朱苗勇（2011）. 钒钛磁铁矿碳热还原的试验研究. 《中国冶金》.
578. 付贵勤，汪锋，高新亮，朱苗勇（2011）. Cu对耐候桥梁钢耐腐蚀性能的影响. 《材料与冶金学报》.
579. 张青学，周海滨，夏政海，杨建华，朱苗勇，郑淑国（2011）. 吹氩板坯结晶器水模型试验研究. 《中国冶金》.
580. 蔡兆镇，朱苗勇（2011）. 宽厚板坯连铸结晶器内坯壳-铜板界面热行为研究. 《第八届（2011）中国钢铁年会》.
581. 蔡兆镇，朱苗勇（2011）. 板坯连铸结晶器内钢凝固过程热行为研究 Ⅰ.数学模型. 《金属学报》.
582. 蔡兆镇，朱苗勇（2011）. 板坯连铸结晶器内钢凝固过程热行为研究 Ⅱ.模型验证与结果分析. 《金属学报》.
583. 高新亮，朱苗勇，付贵勤，汪锋，邓志银（2011）. 桥梁耐候钢在含Cl-离子环境中的腐蚀行为. 《金属学报》.
584. 朱苗勇（2011）. 高效连铸结晶器冶金过程控制关键技术探讨. 《连铸》.
585. 邓志银，钟保军，高新亮，朱苗勇（2011）. 碱度对精炼渣脱氧能力的影响. 《第八届（2011）中国钢铁年会》.
586. 孟祥宁，王卫领，朱苗勇（2011）. 冷却结构对连铸结晶器铜板应力分布影响数值模拟. 《第八届（2011）中国钢铁年会》.
587. 高新亮，付贵勤，邓志银，朱苗勇，曹波，夏政海（2011）. 低合金耐候钢在两种典型环境下的腐蚀行为. 《第八届（2011）中国钢铁年会》.
588. 娄文涛，李勇，朱苗勇（2011）. 顶底复吹转炉内气液两相流行为的数值模拟. 《过程工程学报》.
589. 于海岐，朱苗勇，王宏丹，王军，赵雷，李超，王金辉（2011）. 电磁连铸结晶器内多相传输行为研究. 《第八届（2011）中国钢铁年会》.
590. 李勇，娄文涛，吴伟，朱启柱，陈涛，朱苗勇（2011）. 高效长寿复合吹炼技术在小转炉上的应用. 《第八届（2011）中国钢铁年会论文集》.
591. Xin-Liang Gao, Miao-Yong Zhu, Gui-Qin Fu, Feng Wang, Zhi-Yin Deng (2011). CORROSION BEHAVIOR OF BRIDGE WEATHERING STEELS IN ENVIRONMENT CONTAINING Cl.DOI
592. Shu-Guo Zheng, Miao-yong Zhu, Dong‐zhu Lu (2011). Water Modeling of Optimization of Two‐Strand Tundish Configuration for Slab Continuous Casting with Gas Bubbling.DOI
593. Miao-yong Zhu (2011). Effect of Cu on corrosion resistance performance of bridge weathering steels.
594. 罗森，朱苗勇，祭程，蔡兆镇（2010）. 钢连铸过程的溶质微观偏析模型. 《钢铁》.
595. 郭薇，张立峰，朱苗勇（2010）. 板坯连铸凝固过程微观组织参数的模拟研究. 《钢铁》.
596. 林启勇，朱苗勇（2010）. 钢种和断面对连铸板坯轻压下效率的影响. 《钢铁》.
597. 高新亮，付贵勤，邓志银，林光铭，朱苗勇（2010）. 含Cu桥梁耐候钢的相变规律. 《过程工程学报》.
598. 罗森，朱苗勇，祭程，杨跃标（2010）. 钢连铸两相区溶质再分配数学模型. 《过程工程学报》.
599. 祭程，蒋毅，肖文忠，曹学欠，朱苗勇（2010）. 基于模糊控制的大方坯连铸拉矫机力矩控制. 《第十六届全国炼钢学术会议》.
600. 郑淑国，胡建东，朱苗勇（2010）. 100吨RH真空精炼装置内夹杂物行为的物理模拟. 《第十六届全国炼钢学术会议论文集》.
601. 田新中，朱荣，祭程，朱苗勇（2010）. 动态轻压下技术在SWRH82B大方坯连铸中的应用. 《计算机与应用化学》.
602. 孟祥宁，王卫领，朱苗勇（2010）. 结构参数对连铸结晶器铜板热行为影响研究. 《第十六届全国炼钢学术会议论文集》.
603. 曹学欠，朱苗勇，祭程（2010）. 连铸大方坯热收缩行为的有限元分析. 《连铸》.
604. 郑淑国，朱苗勇，王颖（2010）. 连铸中间包内夹杂物去除行为的物理模拟. 《东北大学学报(自然科学版)》.
605. 郭薇，张立峰，朱苗勇（2010）. 碳钢连铸凝固过程的微观模拟. 《工程科学学报》.
606. 罗森，朱苗勇，祭程，杨跃标，杨吉林（2010）. 连铸大方坯轻压下过程的变形行为. 《工程科学学报》.
607. 曹学欠，朱苗勇，祭程（2010）. 大方坯连铸轻压下压下过程有限元分析. 《中国冶金》.
608. 宋景欣，朱苗勇，程乃良，周秀丽，林启勇（2010）. 对一种连铸板坯异常变形的分析. 《连铸》.
609. 田新中，朱荣，祭程，朱苗勇，李智峥（2010）. GCr15轴承钢大方坯连铸生产中动态轻压下工艺的应用. 《特殊钢》.
610. 胡建东，郑淑国，王帆，朱苗勇（2010）. 六流T形连铸中间包内控流装置优化的水模试验研究. 《连铸》.
611. 杨跃标，祭程，罗森，杨吉林，曹磊，朱苗勇（2010）. 连铸动态二冷控制模型的开发与应用. 《钢铁》.
612. 曹磊，祭程，杨吉林，杨跃标，朱苗勇（2010）. 轻压下帘线钢大方坯成分偏析特征及形成机制. 《钢铁》.
613. Miao-yong Zhu (2010). Phase Transformation of Cu-containing Bridge Weathering Steels.
614. Yong Chen, C. Ji, Miao-yong Zhu, Guo Wu (2010). Control Model of Bloom Dynamic Soft Reduction.DOI
615. W. Guo, Li-Feng Zhang, Miao-yong Zhu (2010). Modeling on Dendrite Growth of Medium Carbon Steel during Continuous Casting.DOI
616. Hong-Dan Wang, Miao-yong Zhu, Hai-Qi Yu (2010). Numerical Analysis of Electromagnetic Field and Flow Field in High Casting Speed Slab Continuous Casting Mold with Traveling Magnetic Field.DOI
617. Hai-Qi Yu, Miao-yong Zhu, Jun Wang (2010). Interfacial fluctuation behavior of steel/slag in medium-thin slab continuous casting mold with argon gas injection.DOI
618. Hai-Qi Yu, Miao-Yong Zhu (2010). Three-Dimensional Magnetohydrodynamic Calculation for Coupling Multiphase Flow in Round Billet Continuous Casting Mold With Electromagnetic Stirring. IEEE transactions on magnetics.DOI
619. Shu-Guo Zheng, Miao-yong Zhu (2010). Physical modeling of gas-liquid interfacial fluctuation in a thick slab continuous casting mold with argon blowing.DOI
620. Sen Luo, Miaoyong Zhu, Cheng Ji, Y. Chen (2010). Characteristics of solute segregation in continuous casting bloom with dynamic soft reduction and determination of soft reduction zone. Ironmaking & Steelmaking Processes Products and Applications.DOI
621. 陈向阳，郑淑国，董杰，朱苗勇（2009）. 钢包底吹氩位置对钢水去夹杂影响的水模型研究. 《特殊钢》.
622. 陈向阳，姜周华，朱苗勇，董杰，王博（2009）. 镁对GCr15轴承钢中氧化铝夹杂的变质行为. 《特殊钢》.
623. 陈向阳，董杰，战东平，朱苗勇（2009）. 管线钢硫化物钙处理技术分析. 《中国冶金》.
624. 付贵勤，薛逊，汪锋，朱苗勇（2009）. 钒钛酸性渣还原过程中钒钛赋存状态的研究. 《矿产综合利用》.
625. 苏旺，朱苗勇，廖志强（2009）. 连铸结晶器电磁偏心搅拌过程数值模拟研究. 《连铸》.
626. 郑淑国，周海斌，朱苗勇（2009）. 吹氩宽厚板坯连铸结晶器内液面波动行为的水模型研究. 《过程工程学报》.
627. 李士琦，曲英，张建良，魏季和，朱苗勇，陈登福，张胤，张延玲，张捷宇（2009）. 冶金反应工程分学科发展. 《2008-2009冶金工程技术学科发展报告》.
628. 王宏丹，于海岐，朱苗勇，陈向阳（2009）. 多模式电磁搅拌板坯连铸结晶器内的三维电磁场和钢液流动. 《第十三届（2009年）冶金反应工程学会议论文集》.
629. 蔡兆镇，朱苗勇（2009）. 溶质偏析对连铸坯凝固前沿裂纹敏感性影响的研究. 《铸造技术》.
630. 陈永，杨素波，朱苗勇（2009）. 360mm×450mm连铸大方坯表面质量控制技术. 《炼钢》.
631. 冯亮花，朱苗勇，刘坤，曹晋伟（2009）. 厚板坯连铸二次冷却传热数学模拟. 《特殊钢》.
632. 陈向阳，曹磊，胡建东，王帆，郑淑国，朱苗勇（2009）. LF精炼炉混合特性及夹杂物去除的水模型研究. 《钢铁》.
633. 祭程，朱苗勇，陈永，吴国荣，杨素波（2009）. 大方坯连铸动态轻压下控制模型的开发与应用. 《钢铁》.
634. 孟祥宁，朱苗勇（2009）. 高拉速连铸结晶器振动参数对板坯表面裂纹形成的影响. 《钢铁》.
635. 陈志平，朱苗勇，文光华，江中块（2009）. 连铸板坯浸入式水口吹氩工艺研究. 《钢铁》.
636. 冯亮花，朱苗勇，刘坤（2009）. 连铸板坯凝固末端位置的研究. 《钢铁》.
637. 袁玲，朱苗勇，陈洁（2009）. 120tAOD炉烘烤器燃烧加热特性研究. 《钢铁》.
638. 苏旺，朱苗勇，田陆（2009）. 连铸结晶器非正弦振动对弯月面形状的影响. 《连铸》.
639. 周海斌，郑淑国，王帆，胡建东，朱苗勇（2009）. 宽厚板坯连铸中间包内控流结构优化水模实验研究. 《连铸》.
640. 陈永，朱苗勇（2009）. 电磁搅拌结晶器钢液流场和温度场模拟仿真. 《钢铁钒钛》.
641. 林启勇，朱苗勇（2009）. 拉速对连铸方坯轻压下率的影响. 《金属学报》.
642. 孟祥宁，朱苗勇（2009）. 高拉速板坯连铸结晶器液态渣消耗机理分析. 《金属学报》.
643. 于海岐，朱苗勇（2009）. 板坯连铸结晶器内钢液过热消除过程的数值模拟. 《金属学报》.
644. 蔡兆镇，朱苗勇（2009）. 钢凝固两相区溶质元素的微观偏析及其对连铸坯表面纵裂纹的影响. 《金属学报》.
645. 朱苗勇（2009）. 高效板坯连铸结晶器集成技术. 《鞍钢技术》.
646. 于海岐，朱苗勇，陈永，杨素波（2009）. 450 mm×360 mm大方坯连铸结晶器电磁搅拌过程的多场耦合分析. 《第七届(2009)中国钢铁年会论文集（上）》.
647. 罗森，祭程，朱苗勇，陈永，杨素波（2009）. 连铸坯凝固末端轻压下压下区间研究与实践. 《第七届(2009)中国钢铁年会论文集（上）》.
648. 蔡兆镇，朱苗勇（2009）. 溶质偏析对连铸坯凝固前沿临界断裂应力影响的研究. 《第七届(2009)中国钢铁年会论文集（上）》.
649. 郭薇，朱苗勇，张立峰（2009）. 中碳钢和不锈钢连铸过程凝固微观组织模拟研究. 《第七届(2009)中国钢铁年会论文集（上）》.
650. 孟祥宁，朱苗勇（2009）. 高拉速板坯连铸结晶器铜板热行为数值模拟. 《第七届(2009)中国钢铁年会论文集（上）》.
651. 祭程，朱苗勇，曹学欠，赵忠义，赵贺朝，赵丽华，李海龙（2009）. 高碳合金钢连铸动态轻压下工艺控制技术的研究与应用. 《第七届(2009)中国钢铁年会论文集（上）》.
652. 曹学欠，祭程，朱苗勇，钟保军，刘敬军，胡黎宁（2009）. 轴承钢GCr15大方坯轻压下压下量参数的研究与应用. 《第七届(2009)中国钢铁年会论文集（上）》.
653. 任兵芝，朱苗勇（2009）. 大方坯连铸结晶器电磁搅拌的数值模拟. 《中国冶金》.
654. 祭程，朱苗勇（2009）. 连铸动态轻压下关键技术与自主开发应用进展. 《中国冶金》.
655. 曹磊，高运明，朱苗勇（2009）. 转炉炼钢过程氧化镍直接合金化的研究. 《中国冶金》.
656. 宋景欣，朱苗勇，祭程，程乃良（2009）. 板坯连铸动态轻压下模型的开发与应用. 《中国冶金》.
657. H. Lei, Yongliang Jin, Miao-yong Zhu, Ji-cheng He (2009). Mathematical Modelling of Particle Movement Ahead of the Solid-liquid Interface in Continuous Casting.
658. Wei Guo, Miao-yong Zhu (2009). Characteristic Parameters for Dendritic Microstructure of Solidification During Slab Continuous Casting.DOI
659. Xiang-Ning Meng, Miao-yong Zhu (2009). Thermal Behavior of Hot Copper Plates for Slab Continuous Casting Mold with High Casting Speed.DOI
660. Wei Guo, Li-Feng Zhang, Miao-yong Zhu (2009). Modeling on Dendrite Growth During Slab Continuous Casting of Stainless Steels.
661. Zhao-Tian Sa, Miao-yong Zhu (2009). MICROSEGREGATION OF SOLUTE ELEMENTS IN SOLIDIFYING MUSHY ZONE OF STEEL AND ITS EFFECT ON LONGITUDINAL SURFACE CRACKS OF CONTINUOUS CASTING STRAND.
662. Hai-Qi Yu, Miao-yong Zhu (2009). NUMERICAL SIMULATION OF LIQUID STEEL SUPERHEAT REMOVAL IN SLAB CONTINUOUS CASTING MOLD.
663. Miao-yong Zhu (2009). Development Application of Refining Temperature Prediction Model of LF.
664. Yong Chen, Guo Wu, Miao-yong Zhu (2009). Quality control for bloom casting of YQ450NQR1 steel.DOI
665. Hai-Qi Yu, Miao-yong Zhu (2009). Effect of electromagnetic stirring in mold on the macroscopic quality of high carbon steel billet.DOI
666. 曹娜，朱苗勇（2008）. 吹氩板坯连铸结晶器内钢/渣界面行为的数值模拟. 《金属学报》.
667. 郑淑国，朱苗勇（2008）. 吹氩钢液精炼过程气泡去夹杂机理研究. 《钢铁》.
668. 于海岐，朱苗勇（2008）. 板坯结晶器电磁制动和吹氩过程的钢/渣界面行为. 《金属学报》.
669. 祭程，朱苗勇，程乃良，郭振和，冷祥贵（2008）. 板坯连铸动态轻压下控制模型的开发与应用. 《钢铁》.
670. 张会祥，孟祥宁，朱苗勇（2008）. 基于Fuzzy-PID的连铸结晶器液位控制新方法. 《炼钢》.
671. 王军，于海岐，朱苗勇（2008）. 中薄板坯连铸结晶器钢/渣界面行为数值模拟. 《材料与冶金学报》.DOI
672. 朱苗勇，周海斌，陈兆平，黄宗泽（2008）. 不锈钢冶炼AOD炉内射流行为和流体流动. 《2008年不锈钢连铸技术交流会》.
673. 孟祥宁，朱苗勇（2008）. 高拉速下连铸结晶器非正弦振动参数优化. 《第四届发展中国家连铸国际会议论文集》.
674. 郑淑国，周海滨，朱苗勇（2008）. 高拉速吹氩板坯连铸结晶器内大气泡形成机理研究. 《第四届发展中国家连铸国际会议论文集》.
675. 祭程，朱苗勇，陈永，马玉堂，孙维松（2008）. 大方坯连铸动态轻压下过程控制系统的研究与开发. 《第四届发展中国家连铸国际会议论文集》.
676. 陈永，吴国荣，朱苗勇（2008）. 含钒高氮钢连铸大方坯质量控制技术研究. 《第四届发展中国家连铸国际会议论文集》.
677. 罗森，朱苗勇，张书岩，王忠英，仝太钦，蔡云腾（2008）. 方坯连铸凝固末端位置研究. 《炼钢》.
678. 郑淑国，朱苗勇，于海岐，曾小平（2008）. 圆坯连铸结晶器电磁搅拌工艺参数优化试验研究. 《东北大学学报(自然科学版)》.
679. 陈永，朱苗勇（2008）. 280 mm×380 mm连铸坯结晶器电磁搅拌技术的应用. 《特殊钢》.
680. 刘坤，朱苗勇，高因，王颖彬，毕晓夫（2008）. 轴对称湍流射流流场的数值模拟. 《炼钢》.
681. 陈永，朱苗勇，任兵芝（2008）. 360mm×450mm方坯连铸结晶器电磁搅拌的数值模拟. 《特殊钢》.
682. 林启勇，朱苗勇（2008）. 厚度和宽度对连铸板坯轻压下率的影响. 《材料研究学报》.
683. 郑淑国，朱苗勇（2008）. 偏心底吹氩钢包内夹杂物行为的物理模拟. 《钢铁研究学报》.
684. 郑淑国，朱苗勇，王颖（2008）. 六流方坯连铸中间包结构优化水模实验. 《钢铁研究学报》.
685. 刘坤，朱苗勇，王滢冰（2008）. 聚合射流流场的仿真模拟. 《钢铁研究学报》.
686. 赵琦，孟祥宁，朱苗勇（2008）. 基于模糊聚类及神经网络的连铸漏钢预报. 《中国冶金》.
687. 潘时松，朱苗勇，谭建平，周建安（2008）. 精炼钢包狭缝喷粉水模型研究. 《中国冶金》.
688. 蔡兆镇，朱苗勇，孟祥宁，宋景欣，程乃良（2008）. 高效板坯连铸结晶器监控技术集成系统开发. 《中国冶金》.
689. 陈永，杨素波，朱苗勇（2008）. 360mm×450mm大方坯连铸二冷技术研究. 《钢铁钒钛》.
690. 陈永，杨素波，朱苗勇（2008）. 攀钢低合金钢板坯角横裂缺陷的控制技术. 《钢铁钒钛》.
691. 陈永，朱苗勇，蔡可森，杨晓东（2008）. 280mm×380mm方坯连铸结晶器电磁搅拌数值模拟. 《钢铁钒钛》.
692. 任兵芝，朱苗勇，王宏丹，陈永（2008）. 大方坯连铸结晶器电磁搅拌三维电磁场与流场的数值模拟. 《金属学报》.
693. 曹娜，朱苗勇（2008）. 吹氩板坯连铸结晶器内双循环流的形成条件. 《金属学报》.
694. 于海岐，朱苗勇（2008）. 板坯连铸结晶器电磁制动和吹氩过程的多相流动现象. 《金属学报》.
695. 孟祥宁，朱苗勇（2008）. 高拉速板坯连铸结晶器液体摩擦机理分析. 《金属学报》.
696. 于海岐，朱苗勇（2008）. 圆坯结晶器电磁搅拌过程三维流场与温度场数值模拟. 《金属学报》.
697. 祭程，朱苗勇（2008）. 连铸机动态轻压下技术的开发与应用. 《品种钢连铸坯质量控制技术研讨会论文集》.
698. 赵琦，朱苗勇，孟祥宁（2008）. 基于新型模糊神经网络连铸漏钢诊断预报的研究. 《铸造技术》.
699. 周海斌，郑淑国，朱苗勇，张青学，夏政海，肖大恒（2008）. 宽厚板坯连铸中间罐内钢液流动特性分析. 《材料与冶金学报》.
700. 罗森，祭程，朱苗勇，陈永，吴国荣（2008）. 大方坯连铸在线凝固传热模型的开发与应用. 《连铸》.
701. 周海斌，郑淑国，朱苗勇，张青学，夏政海，肖大恒（2008）. 宽厚板坯连铸结晶器内气液界面波动行为的实验研究. 《连铸》.
702. Shu-Guo Zheng, Miao-yong Zhu (2008). Study on Mechanism of Large Bubble Formation in Slab Continuous Casting Mould with Argon Blowing.DOI
703. Shu-Guo Zheng, Miao-yong Zhu (2008). Physical Modelling of Inclusion Behaviour in Secondary Refining with Argon Blowing.DOI
704. Miao-yong Zhu (2008). Study on Viscosity and Melting Temperature of Acidic Vanadium-titanium-containing Slag.
705. Miao-yong Zhu, Yongyan Wu, Shu-Guo Zheng, Ya-Xing Chen, Zong-ze Huang (2008). Heat Transfer and Inclusion Behavior in Continuous Casting Tundishes.DOI
706. Jun Wang, Miao-yong Zhu, Hai-bing Zhou, Ying Wang (2008). Fluid flow and interfacial phenomenon of slag and metal in continuous casting tundish with argon blowing.DOI
707. Miao-yong Zhu (2008). Physical Modeling of Inclusion Behavior in Ladle With Eccentric Bottom Blowing Argon.
708. Hai-Qi Yu, Miao-yong Zhu (2008). Numerical Simulation of the Effects of Electromagnetic Brake and Argon Gas Injection on the Three-dimensional Multiphase Flow and Heat Transfer in Slab Continuous Casting Mold.DOI
709. Xiang-Ning Meng, Miao-yong Zhu (2008). ANALYSIS OF LIQUID FRICTION MECHANISM FOR SLAB CONTINUOUS CASTING MOLD WITH HIGH CASTING SPEED.
710. Hai-Qi Yu, Miao-Yong Zhu (2008). 3-D NUMERICAL SIMULATION OF FLOW FIELD AND TEMPERATURE FIELD IN A ROUND BILLET CONTINUOUS CASTING MOLD WITH ELECTROMAGNETIC STIRRING.
711. 林启勇，朱苗勇（2007）. 连铸板坯轻压下过程压下率理论模型及其分析. 《金属学报》.
712. 郭亚东，肖丽俊，仇圣桃，颜慧成，朱苗勇（2007）. TSCR工艺生产SPHC板过程硼微合金化对AlN、MnS析出的影响. 《钢铁研究学报》.
713. 郑淑国，王颖，朱苗勇，冷祥贵，陈志平（2007）. 换包过程连铸中问包内夹杂物行为的水模型研究. 《2007中国钢铁年会》.
714. 孟祥宁，朱苗勇，程乃良（2007）. 连铸结晶器非正弦振动参数优化研究. 《2007中国钢铁年会》.
715. 孟祥宁，朱苗勇，江中块，冷祥贵，程乃良（2007）. 高拉速非正弦振动连铸结晶器内振痕的形成机理研究. 《第八届全国连铸学术会议》.
716. 杜成武，李丽颖，潘时松，朱苗勇（2007）. RH真空精炼装置内顶枪喷粉时粉气流行为的理论分析. 《2007中国钢铁年会》.
717. 孟祥宁，朱苗勇（2007）. 高拉速连铸结晶器非正弦振动同步控制模型. 《钢铁研究学报》.
718. 周建安，朱苗勇，潘时松，沙骏（2007）. 狭缝式透气砖底喷粉铁水脱硫的实验研究. 《钢铁研究学报》.
719. 吴永来，王颖，朱苗勇，姜茂发（2007）. 气幕挡墙中间包内渣钢界面卷混现象. 《钢铁研究学报》.
720. 任兵芝，王宏丹，朱苗勇，曾小平，吴波，凌遵峰（2007）. 圆坯连铸结晶器电磁搅拌三维电磁场的数值模拟. 《2007中国钢铁年会论文集》.
721. 周建安，朱苗勇，潘时松（2007）. 狭缝式透气砖内气流速度分布规律及阻力研究. 《炼钢》.
722. 曹娜，朱苗勇，宋景欣，冷祥贵，程乃良（2007）. 板坯连铸结晶器内钢渣界面行为的数值模拟. 《第八届全国连铸学术会议论文集》.
723. 孟祥宁，朱苗勇，程乃良，江中块（2007）. 高拉速连铸结晶器的非正弦振动振幅. 《中国有色金属学报》.
724. 林启勇，朱苗勇（2007）. 连铸板坯轻压下过程压下率理论模型. 《第八届全国连铸学术会议》.
725. 孟祥宁，朱苗勇，刘旭东，程乃良，江中块（2007）. 高拉速连铸结晶器非正弦振动频率的研究. 《铸造技术》.
726. 赵琦，朱苗勇（2007）. 基于改进模糊ART神经网络的连铸漏钢预报模型. 《中国冶金》.
727. 潘学峰，周海斌，朱苗勇（2007）. 连铸中间包内钢液温度变化规律的研究. 《中国冶金》.
728. 潘时松，朱苗勇，周建安（2007）. 精炼钢包底喷粉透气砖的研制与实验研究. 《中国冶金》.
729. 刘坤，朱苗勇，高茵，吕国成，王振华（2007）. Laval喷管内流动特征的数值模拟. 《冶金能源》.
730. 朱苗勇，林启勇，王军（2007）. 连铸板坯轻压下过程压下率参数的理论分析. 《鞍钢技术》.
731. 曹娜，朱苗勇（2007）. 板坯连铸中间包内控流装置结构的优化. 《材料与冶金学报》.
732. 李永祥，程乃良，冷祥贵，郑淑国，曹娜，朱苗勇（2007）. 优化高拉速板坯连铸中间包控流装置的水模型和数值模拟. 《连铸》.
733. 孟祥宁，朱苗勇，刘旭东（2007）. 连铸结晶器非正弦振动振幅的确定. 《特殊钢》.
734. 林启勇，朱苗勇（2007）. 铸坯尺寸对轻压下过程压下率影响规律研究. 《2007中国钢铁年会论文集》.
735. 孟祥宁，朱苗勇，程乃良（2007）. 高拉速下连铸坯振痕形成机理及振动参数优化. 《金属学报》.
736. 曹娜，朱苗勇（2007）. 高拉速板坯连铸结晶器内钢/渣界面行为的数值模拟. 《金属学报》.
737. 张胜军，朱苗勇（2007）. 连铸中间包内夹杂物去除机理的水模型研究. 《金属学报》.
738. 祭程，陈志平，宋景欣，赵琦，朱苗勇（2007）. 高拉速板坯连铸机动态二冷控制模型研究. 《冶金自动化》.
739. 祭程，赵琦，朱苗勇，夏建超，程乃良（2007）. 板坯连铸机动态轻压下过程控制系统通信接口研究与开发. 《冶金自动化》.
740. 祭程，赵琦，朱苗勇，田建良，程乃良（2007）. 板坯连铸机动态轻压下过程控制系统的高可用性实现. 《冶金自动化》.
741. 郭薇，赵琦，祭程，朱苗勇，宋景欣，冷祥贵（2007）. 板坯连铸温度场实时仿真系统的研究和实现. 《冶金自动化》.
742. 祭程，朱苗勇，程乃良（2007）. 板坯连铸机动态轻压下过程控制系统的研究与实现. 《冶金自动化》.
743. 林启勇，朱苗勇（2007）. 连铸板坯轻压下过程中的压下效率分析. 《金属学报》.
744. 林启勇，朱苗勇（2007）. 不同钢种连铸板坯轻压下率的规律分析. 《金属学报》.
745. 陈永，杨素波，朱苗勇（2007）. 结晶器电磁搅拌改善重轨钢连铸坯内部质量的试验研究. 《钢铁》.
746. 孟祥宁，朱苗勇，刘旭东，程乃良，江中块（2007）. 高拉速连铸结晶器非正弦振动因子研究. 《金属学报》.
747. 潘时松，朱苗勇（2007）. 精炼钢包透气砖中喷粉颗粒的运动特性. 《金属学报》.
748. 张胜军，郑淑国，朱苗勇（2007）. 连铸中间包内夹杂物去除行为的水模型研究. 《工程科学学报》.
749. Xu-Dong Liu, Xiaodong Yang, Miao-yong Zhu, Yong Chen, Su-bo Yang (2007). Finite Element Analysis of 3-D Electromagnetic Field in Bloom Continuous Casting Mold.DOI
750. Yong Chen, Gui-Jun Li, Su-bo Yang, Miao-yong Zhu (2007). Dynamic Soft Reduction for Continuously Cast Rail Bloom.DOI
751. Miao-yong Zhu (2007). WATER MODEL STUDY ON MECHANISM OF INCLUSION REMOVAL IN CONTINUOUS CASTING TUNDISH.
752. 朱苗勇，周海斌，陈兆平，黄宗泽（2006）. 不锈钢冶炼用AOD炉内的射流行为和流体流动. 《金属学报》.
753. 陈永，杨素波，朱苗勇（2006）. 高速轨用钢连铸坯内部质量控制的关键技术. 《钢铁》.
754. 刘旭东，朱苗勇，程乃良（2006）. 板坯连铸结晶器的热弹塑性力学分析. 《金属学报》.
755. 郑淑国，朱苗勇（2006）. 钢包内喷嘴与透气砖吹氩去夹杂水模型研究. 《金属学报》.
756. 刘旭东，朱苗勇，程乃良（2006）. 板坯连铸结晶器热行为研究. 《金属学报》.
757. 张胜军，朱苗勇，张永亮，郑淑国，程乃良，宋景欣（2006）. 高拉速吹氩板坯连铸结晶器内的卷渣机理研究. 《金属学报》.
758. 祭程，赵琦，朱苗勇，李卫东，程乃良（2006）. 板坯连铸机动态轻压下二级控制与通信系统开发. 《中国冶金》.
759. 孟祥宁，朱苗勇（2006）. 高拉速连铸结晶器非正弦振动波形. 《过程工程学报》.
760. 郑淑国，朱苗勇，潘时松（2006）. RH真空精炼装置内夹杂物行为的实验研究. 《金属学报》.
761. 孟祥宁，朱苗勇（2006）. 基于量纲分析的连铸结晶器非正弦振动参数控制. 《第十一届全国自动化应用技术学术交流会论文集》.
762. 程乃良，冷祥贵，杨智伟，朱苗勇（2006）. 吹氩连铸中间包内钢液流动特性的水模型实验研究. 《材料与冶金学报》.
763. 郭薇，祭程，赵琦，朱苗勇（2006）. 板坯连铸动态轻压下系统中在线实时温度场的计算模型. 《材料与冶金学报》.
764. 郑淑国，朱苗勇（2006）. 多流连铸中间包各流流动特性一致性的判别. 《过程工程学报》.
765. 张书岩，朱苗勇，陈永，杨素波（2006）. 360mm×450mm方坯连铸机二冷区喷嘴的冷却特性. 《特殊钢》.
766. 耿建林，朱苗勇，郑淑国，曹娜（2006）. 南钢宽厚板坯连铸中间罐流场优化研究. 《连铸》.
767. Xu-Dong Liu, Miao-yong Zhu (2006). Finite Element Analysis of Thermal and Mechanical Behavior in a Slab Continuous Casting Mold.DOI
768. Miao-yong Zhu (2006). Experimental Study on Distensibility of BOF Slag.
769. Cheng‐Wu Du, Miaoyong Zhu, Li‐Na Sun, Shi‐Ze Dong (2006). Metallurgical Characteristics and Effectiveness of Metallic Charges in Electric Arc Furnace. Developments in Chemical Engineering and Mineral Processing.DOI
770. 朱苗勇，程乃良（2005）. 连铸坯的动态轻压下技术. 《2005中国钢铁年会论文集（第3卷）》.
771. 陈亚贤，黄宗泽，朱苗勇，郑淑国（2005）. 结晶器内渣钢卷混过程的水模拟研究. 《2005中国钢铁年会论文集（第3卷）》.
772. 陈亚贤，黄宗泽，朱苗勇，郑淑国（2005）. 单流连铸中间包内控流装置优化的水模研究. 《2005中国钢铁年会论文集（第3卷）》.
773. 朱苗勇，王军，雷洪，邹俊苏，程乃良（2005）. 连铸结晶器内钢水卷渣的机理与控制. 《鞍钢技术》.
774. 郑淑国，朱苗勇（2005）. 多流连铸中间包内钢液流动特性的分析模型. 《金属学报》.
775. 朱苗勇（2005）. 现代冶金学. 钢铁冶金卷. 《冶金工业出版社》.
776. 祭程，张书岩，赵琦，朱苗勇，程乃良，宋景欣，李卫东（2005）. 连铸板坯轻压下实时温度场计算及动态二冷控制模型的研究与开发. 《2005中国钢铁年会论文集（第3卷）》.
777. 郑淑国，朱苗勇，潘时松，杜成武，张胜军（2005）. RH精炼装置内夹杂物行为的水模实验研究. 《2005中国钢铁年会论文集（第3卷）》.
778. 杜成武，朱苗勇，潘时松，郑淑国（2005）. RH-PTB真空精炼装置内熔池混匀时间的研究. 《2005中国钢铁年会论文集（第3卷）》.
779. Miao-yong Zhu, Shu-Guo Zheng, Zong-ze Huang, Wenping Gu (2005). Numerical Simulation of Nonmetallic Inclusions Behaviour in Gas‐Stirred Ladles.DOI
780. Jun-Fei Fan, Ya-Xiang Chen, San Ren, Zong-ze Huang, Miao-yong Zhu (2005). Simulation Study of Thermal Buoyance Influence on Flow Characteristic in Single Outlet Tundish.DOI
781. 郑淑国，朱苗勇（2004）. 薄板坯连铸中间包内抑湍器的模拟研究. 《钢铁研究学报》.
782. 朱苗勇，林启勇（2004）. 连铸坯的轻压下技术. 《鞍钢技术》.
783. 朱苗勇，程乃良，杨洪良（2004）. 钢包精炼过程中电磁搅拌技术使用效果研究. 《2004中国国际钢铁大会技术交流会》.
784. 郑淑国，朱苗勇，姜桂连，宋嘉鹏（2004）. 四流矩形中间包冲击碗应用水模实验研究. 《钢铁》.
785. 孟祥宁，张海鹰，朱苗勇（2004）. 转炉炼钢过程静态控制模型的改进. 《材料与冶金学报》.
786. 林启勇，蒋欢杰，朱苗勇（2004）. 连铸坯动态轻压下的压下参数分析. 《材料与冶金学报》.
787. 陈兆平，黄宗泽，滕晓峰，朱苗勇（2003）. 宝钢AOD-VOD不锈钢冶炼过程的数学模拟Ⅱ:模型应用. 《中国金属学会2003中国钢铁年会论文集（3）》.
788. 谢海唯，朱苗勇，宋景欣，程乃良（2003）. 连铸方坯凝固末端轻压下位置的预报研究. 《材料与冶金学报》.
789. 杜成武，朱苗勇，董世泽，唐富东（2003）. 硅铝钡铁合金在炼钢中的脱氧研究. 《铁合金》.
790. H. Lei, Miao-yong Zhu, Ji-cheng He (2003). Optimum Position of Electromagnetic Brake on Slab Caster.
791. 刘旭东，朱苗勇，邹俊苏，宋景欣，程乃良（2002）. 连铸板坯凝固传热过程的计算机模拟. 《材料与冶金学报》.
792. 滕晓峰，郑淑国，朱苗勇，刘平，潘辉（2002）. 三流连铸中间罐内控流装置优化的水模型研究. 《连铸》.
793. 雷洪，金永丽，朱苗勇，赫冀成（2002）. 连铸结晶器内电磁制动过程的数值模拟. 《钢铁研究学报》.
794. 朱苗勇，刘建华（2002）. LF精炼过程夹杂物行为的数值模拟. 《2002年材料科学与工程新进展（下）——2002年中国材料研讨会论文集》.
795. 沙骏，钱洪俊，朱苗勇，张军（2001）. 等离子加热中间罐流体流动和传热行为的物理模拟. 《连铸》.
796. 雷洪，朱苗勇，赫冀成（2001）. 连铸结晶器内非金属夹杂物运动行为模拟. 《过程工程学报》.
797. 沙骏，朱苗勇，万利成，郭宝志（2001）. 转炉溅渣护炉炉渣物性研究. 《炼钢》.
798. 许海虹，朱苗勇（2001）. RH精炼装置内钢液循环流量的数学模型. 《2001中国钢铁年会论文集（上卷）》.
799. 朱苗勇，黄宗泽（2001）. RH真空脱碳精炼过程的模拟研究. 《金属学报》.
800. 雷洪，朱苗勇，赫冀成（2001）. 连铸结晶器漩涡现象的物理模拟. 《过程工程学报》.
801. 程乃良，朱苗勇，肖泽强（2001）. 非等温双流连铸中间包内钢液的流动与传热特征. 《钢铁》.
802. 金永刚，许海虹，朱苗勇（2001）. RH-KTB精炼中钢液溶氧过程动力学的水模拟研究. 《钢铁研究学报》.
803. Miao-yong Zhu, T. Jones, Si-Chen Du (2001). Modelling study of slag foaming by chemical reaction.DOI
804. 金永刚，许海虹，朱苗勇（2000）. RH真空脱气动力学过程的物理模拟研究. 《炼钢》.
805. 王妍，郑炜，朱立新，牟济宁，朱苗勇（2000）. 宝钢一炼钢厂连铸机结晶器浸入式水口吹氩的水模研究. 《宝钢技术》.
806. 朱苗勇，沙骏，黄宗泽（2000）. RH真空精炼装置内钢液流动行为的数值模拟. 《金属学报》.
807. 雷洪，朱苗勇，赫冀成（2000）. 连铸结晶器内卷渣过程的数学模型. 《金属学报》.
808. 雷洪，朱苗勇，邱同榜，骆忠汉（2000）. 板坯连铸结晶器流场优化. 《炼钢》.
809. Miao-yong Zhu, Si-Chen Du (2000). Modelling study of slag foaming phenomenon.DOI
810. 樊俊飞，张清朗，朱苗勇，雷洪，王文忠（1999）. 六流连铸中间包内钢液流动的数值模拟. 《宝钢技术》.
811. 雷洪，朱苗勇，王文忠（1999）. 板坯结晶器内电磁制动过程流场的数值模拟. 《过程工程学报》.
812. 樊俊飞，张清朗，朱苗勇，王文忠（1999）. 多流连铸中间包流动与传热耦合过程的数值模拟. 《内蒙古科技大学学报》.
813. 樊俊飞，朱苗勇，张清朗，王文忠，樊俊飞（1999）. 六流连铸中间包内流动与传热耦合过程的数值模拟及控流装置优化. 《金属学报》.
814. 雷洪，朱苗勇，赫冀成（1999）. 连铸结晶器内非金属夹杂物运动行为的计算机模拟. 《第六届连续铸钢全国学术会议》.
815. 樊俊飞，张清朗，朱苗勇，王文忠（1999）. 对改进后的六流连铸中间包的分析. 《宝钢技术》.
816. 樊俊飞，张清朗，朱苗勇，王文忠（1999）. 六流连铸中间包内流动与传热过程的数值模拟及控流装置的优化研究. 《1999中国钢铁年会论文集（上）》.
817. 雷洪，许海虹，朱苗勇，干勇，刘新，倪满森，刘家奇（1999）. 高速连铸结晶器内卷渣机理及其控制研究. 《钢铁》.
818. Miao-yong Zhu, I. Sawada (1999). Mathematical Modeling of Fluid Flow and Mixing Process in Refining Vessels with Submerged Gas Injection.
819. 朱苗勇（1998）. CFD在过程冶金中的地位和应用. 《钢铁》.
820. 樊俊飞，张清朗，朱苗勇，雷洪，王文忠（1998）. 六流T形连铸中间包内控流装置优化的水模研究. 《钢铁》.
821. 雷洪，朱苗勇，汪湿泉，许海虹，王文忠，樊俊飞，弁济宁（1998）. 水口吹氩对结晶器弯月面波动的影响. 《中国有色金属学报》.
822. Miao-yong Zhu, I. Sawada, M. Iguchi (1998). Physical Characteristics of a Horizontally Injected Gas Jet and Turbulent Flow in Metallurgical Vessels.DOI
823. 朱苗勇，泽田郁夫（1997）. 连铸中间包内三维湍流流动的数值模拟. 《金属学报》.
824. 朱苗勇（1997）. 浸入式水平喷吹冶金反应器内的射流特征和数学模化. 《1997中国钢铁年会论文集（下）》.
825. 朱苗勇（1997）. 连铸中间包内钢液流动与传热耦合过程的计算机模拟. 《金属学报》.
826. 朱苗勇（1997）. 浸入式水平喷吹冶金反应器内的射流特征和湍流流动——流动和混合过程的模拟和优化. 《1997中国钢铁年会论文集（下）》.
827. Miao-yong Zhu, I. Sawada, N. Yamasaki, Tse-chiang Hsiao (1996). Numerical simulation of three-dimensional fluid flow and mixing process in gas-stirred ladles.DOI
828. 朱苗勇，赵连刚，肖泽强（1995）. CAS-OB过程熔池传热规律的模拟研究. 《过程工程学报》.
829. Miao-yong Zhu, T. Inomoto, I. Sawada, Tse-chiang Hsiao (1995). Fluid flow and mixing phenomena in the ladle stirred by argon through multi-tuyere.DOI
830. 朱苗勇，肖泽强（1993）. 吹氩钢包内气液两相流行为十年研究进展及其分析. 《过程工程学报》.

书籍章节

1. Cheng Ji, Miaoyong Zhu, Rui Guan (2025). Solute Transport Law of Continuous Casting Billet During Reduction Process. Springer eBooks.DOI
2. Zhaozhen Cai, Miaoyong Zhu (2025). Hot Charging Crack of Micro-alloyed Steel Slab and Its Control. Springer eBooks.DOI
3. Zhaozhen Cai, Miaoyong Zhu (2025). Overview. Springer eBooks.DOI
4. Zhaozhen Cai, Miaoyong Zhu (2025). Corner Crack of Micro-alloyed Steel Thin Slab and Its Control. Springer eBooks.DOI
5. Zhaozhen Cai, Miaoyong Zhu (2025). Off-Corner Depression of Micro-alloyed Steel Thick Slab and Its Control. Springer eBooks.DOI
6. Zhaozhen Cai, Miaoyong Zhu (2025). Transverse Corner Crack of Micro-alloyed Steel Slab and Its Control. Springer eBooks.DOI

书籍

1. Zhaozhen Cai, Miaoyong Zhu (2025). The Control Technology for Slab Surface Crack During Continuous Casting of Micro-alloyed Steel. Springer eBooks.DOI