王松涛

2026

三维导流支板气动优化设计及流动特性研究

《工程热物理学报》

2026

端壁抽吸位置对高负荷扩压叶栅性能的影响研究

《风机技术》

DOI

2026

Film-Cooling Performance of a Turbine Blade on the Pressure Side Supplied by a U-Shaped Internal Crossflow Cooling Channel

Aerospace Science and Technology

DOI

2026

Asymmetric Leading-Edge Design Mechanisms and Multi-Agent Reinforcement Learning Optimization for Wide-Incidence Turbine Blades

Energy

DOI

2026

Influence of combined blade design–end wall modeling on secondary flow in a wide-operating-condition turbine

The Physics of Fluids

DOI

2026

Spatial Aerodynamic Parameters Prediction for Wide-Incidence Turbines Using Small-Scale Experimental Data-Driven GNNs

Journal of turbomachinery

DOI

2026

Flow control in tandem cascades using steady and unsteady end wall boundary layer suction

The Physics of Fluids

DOI

2026

Influence of Endwall Contouring Domain on the Aerodynamic Performance in Simulated Ceramic Matrix Composite Turbine Cascades

Aerospace Science and Technology

DOI

2026

Secondary Loss Reduction via Integrated Endwall and Blade Profiling in Turbine Stage

Journal of Propulsion and Power

DOI

2026

Aerodynamic Optimization of a Heavy-Duty Gas Turbine Vane: Synergizing Non-Axisymmetric Endwall Contouring with 3D Blade Profiling

Aerospace Science and Technology

DOI

2026

Aerodynamic Response of Endwall Contouring to Blade Bowing Variations in Turbine Cascade

Aerospace Science and Technology

DOI

2026

Aerothermal performance of double-jet film cooling in multidirectional crossflow

International Communications in Heat and Mass Transfer

DOI

2026

Incidence-tolerant blade profile optimization and loss mechanisms for a transonic high through-flow turbine

Proceedings of the Institution of mechanical engineers. Part A, journal of power and energy

DOI

2025

不同流量系数下涡轮流动特性研究

《气动研究与试验》

DOI

2025

吹风比变化对篦齿通道流动性能和气膜冷却效果的影响

《工程热物理学报》

2025

旋转状态下篦齿流动换热特性研究

《工程热物理学报》

2025

基于图神经网络拓宽涡轮攻角适应性优化研究

《工程热物理学报》

2025

Aerothermal performance of different relative positions of holes and ribs of a flat-plate film cooling hole with a straight-ribbed crossflow coolant channel

Aerospace Science and Technology

DOI

2025

A novel dual attention network for sparse reconstruction of turbine blade surface fields

Energy

DOI

2025

Conjugate heat transfer and flow analysis on double-wall cooling structures with a sinusoidal corrugated target surface

Applied Thermal Engineering

DOI

2025

Investigation of rail inclination effects on the aerothermal performance of turbine blade squealer tips with crown holes

International Journal of Thermal Sciences

DOI

2025

Flow and heat transfer characteristics of a squealer tip with bent rail in turbine blades

Physics of Fluids

DOI

2025

Effect of pressure-side squealer shape and coolant supply on tip aerothermal characteristics in a turbine blade

International Communications in Heat and Mass Transfer

DOI

2025

Large eddy simulation of compound angle film cooling with round holes embedded in ginkgo-shaped craters

Aerospace Science and Technology

DOI

2024

轴向超音速来流下超音通流风扇叶型气动特性研究

《工程热物理学报》

2024

非轴造型对涡轮损失控制的攻角适应性研究

《工程热物理学报》

2024

四级低反力度压气机初步设计及流动分析

《工程热物理学报》

2024

球窝抑制层流分离的大涡模拟研究

《工程热物理学报》

2024

Investigation of non-axisymmetric endwall contouring in a high loaded turbine stator cascade

Proceedings of the Institution of mechanical engineers. Part A, journal of power and energy

DOI

2024

On the aero-thermal performance of flat-plate film cooling hole with variable rib heights

The Physics of Fluids

DOI

2024

Endwall Contouring for Improving Aerodynamic Performance in a High Pressure Turbine Cascade

Journal of turbomachinery

DOI

2024

Design, optimization, and performance analysis of a subsonic high-through flow turbine

The Physics of Fluids

DOI

2024

Effects of blowing ratio and film hole arrangement on cavity blade tip cooling

The Physics of Fluids

DOI

2024

Heat Transfer and Flow Structure of a Turbine Blade’s Air-cooled Leading Edge Considering Different Hole Shapes and Additional Flow Angles

Journal of Thermal Science

DOI

2024

Incidence Adaptation to the Influence of Wake Sweeps on the Aerodynamic Performance of a Low-Pressure Turbine Cascade

Aerospace

DOI

2024

A cooled turbine blade design and optimization method considering the cooling structure influence

The Physics of Fluids

DOI

2024

Exploring the Aerodynamic Effect of Blade Gap Size via a Transient Simulation of a Four-Stage Turbine

Aerospace

DOI

2024

Optimization of Rotor Tip Cavity Shapes for Mitigating Aerodynamic Tip Leakage Losses

Journal of Propulsion and Power

DOI

2024

Enhancing Aerodynamic Performance of a Non-Axisymmetric Endwall Contoured Cascade Through Section Profiling Method

Journal of turbomachinery

DOI

2024

Optimization of a high through-flow design turbine using response surface method

The Physics of Fluids

DOI

2024

Aerodynamic Performance Prediction for Wide-Incidence Turbines Using Graph Neural Network Models Driven by Small-Scale Experimental Data

Journal of turbomachinery

DOI

2024

Development of a tip leakage loss model for high-pressure turbines with squealer tips based on physics-driven and data-driven methods

The Physics of Fluids

DOI

2024

Performance of a tip shroud with film cooling and labyrinth seals

Physics of Fluids

DOI

2024

Numerical investigations of aerodynamic characteristics in highly loaded tandem cascades with end-bend

Energy

DOI

2024

Entropy generation rate and proper orthogonal decomposition analysis for unsteady flow and losses of turbine vane cutback

Applied Thermal Engineering

DOI

2024

Effects of curved vanes on aerodynamic performance and flow structures in highly loaded tandem cascades

Physics of Fluids

DOI

2024

Influence of oncoming flow parameters on rotating detonation combustor with supersonic turbine guide vanes

Physics of Fluids

DOI

2024

Numerical study of a novel cooling protection scheme with rail crown holes for the squealer tip in a turbine blade

Physics of Fluids

DOI

2024

On the Aero-Thermal Performance of Rim Film Cooling in the Squealer Tip of a Linear Turbine Cascade

ASME Journal of Heat and Mass Transfer

DOI

2024

Heat transfer enhancement of return channel by using rib turbulator for a new impingement cooling scheme

International Communications in Heat and Mass Transfer

DOI

2024

Aero-thermal coupling optimization for a turbine blade with lamilloy cooling structure based on machine learning

IET conference proceedings.

DOI

2024

Influence of gap size and cavity depth on the performance of a squealer tip with rail crown holes in turbine blades

Physics of Fluids

DOI

2024

Effects of transverse divider wall within the squealer cavity on the performance of a novel squealer tip with rail crown holes for the gas turbine blade

International Journal of Thermal Sciences

DOI

2024

Numerical analysis for a novel cooling protection scheme with rail crown holes and streamwise divider wall for the squealer tip in a turbine blade

International Communications in Heat and Mass Transfer

DOI

2024

Experimental and numerical investigation on turbine flow control through integrating endwall contouring with section profiling at different Mach numbers

Aerospace Science and Technology

DOI

2024

The effect of rail crown film hole injection angle and blowing ratio on the flow and cooling performance of the squealer tip in a turbine blade

Applied Thermal Engineering

DOI

2024

Effects of vortex generators on endwall film cooling in a turbine vane

International Communications in Heat and Mass Transfer

DOI

2024

Effects of vortex generators and pulsation on compound angle film cooling

Applied Thermal Engineering

DOI

2023

宽速域来流对超声通流风扇叶型气动性能的影响

《航空学报》

2023

内部冲击构型对气冷涡轮气热耦合计算影响的对比研究

《工程热物理学报》

2023

Role of tip leakage flow in an ultra-highly loaded transonic rotor aerodynamics

Energy

DOI

2023

DES study of the unsteady flow and film cooling at trailing edge cutback with various internal rib configurations

Aerospace Science and Technology

DOI

2023

Effects of Reynolds Number and Tooth Front Angle on Leakage Loss and Heat Transfer Characteristics in a Rotating Labyrinth Seal

Journal of Thermal Science and Engineering Applications

DOI

2023

Numerical investigation of tip clearance flow in a variable geometry turbine with non-uniform partial clearance

International Journal of Turbo and Jet Engines

DOI

2023

Flow instability control of an ultra-highly loaded transonic compressor rotor using self-excited casing bleed

Physics of Fluids

DOI

2023

Coupling study of supersonic turbine stage and two-dimensional hydrogen/air rotating detonation combustor

Physics of Fluids

DOI

2023

Experimental and numerical investigations for turbine aerodynamic performance with different pressure side squealers and incidence angles

Aerospace Science and Technology

DOI

2023

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Aerospace

DOI

2023

Research on performance predictions using single-hole film cooling based on PointNet

Physics of Fluids

DOI

2023

DDES Study on the Influence of a Whisker Trailing Edge on the Wake-Blade Interaction of a High-Pressure Turbine Stage

Journal of Aerospace Engineering

DOI

2023

Quasi-three-dimensional loss prediction model of subsonic compressor cascade based on bidirectional long short-term memory networks and multi-head self-attention

Physics of Fluids

DOI

2023

Numerical study on the integration of supersonic turbine guide vanes and three-dimensional hydrogen/air rotating detonation combustor

Physics of Fluids

DOI

2023

DDES study on a pressure-side cutback cooling turbine blade with a whisker lip and a whisker trailing edge

Numerical Heat Transfer Part A Applications

DOI

2023

Numerical analysis for film cooling characteristics of trenched hole under the effects of rib-disturbed feed flow and curved surface

Physics of Fluids

DOI

2023

THE SEALING CAPACITY AND HEAT TRANSFER CHARACTERISTICS OF A STRAIGHT-THROUGH LABYRINTH SEAL WITH DIFFERENT GEOMETRIC PARAMETERS

Heat Transfer Research

DOI

2022

基于Bezier曲线的非轴对称端壁流动控制模拟与实验研究

《节能技术》

2022

基于机器学习的单孔绝热气膜冷却效率分布预测研究

《推进技术》

2022

基于跨声速高压涡轮凹槽叶顶间隙模型的大涡模拟研究

《推进技术》

2022

低反力度跨声速转子的叶顶喷气扩稳数值研究

《推进技术》

2022

Numerical study of a novel curved pin fin for heat transfer enhancement within aeroengine turbine blade

Aerospace Science and Technology

DOI

2022

Cost reduction for data acquisition based on data fusion: Reconstructing the surface temperature of a turbine blade

Physics of Fluids

DOI

2022

Numerical evaluation of a new impingement cooling scheme with a separate return-channel applied to turbine blade leading edge

Applied Thermal Engineering

DOI

2022

Experimental and Numerical Investigation of High Load Turbine Blade Tip Cavity Structures

Journal of Turbomachinery

DOI

2022

Effects of Flow Coefficient on Turbine Aerodynamic Performance and Loss Characteristics

International Journal of Aerospace Engineering

DOI

2022

Numerical investigation of a variable stator vane with nonuniform partial radial gaps in an annular compressor cascade

International Journal of Turbo and Jet Engines

DOI

2022

Large Eddy Simulation Study on the Application of a Whisker Structure to the Lip of a Trailing Edge Cutback

DOI

2022

Numerical Investigation of a Turbine Stator with Nonaxisymmetric Endwall Profiling

Journal of Thermal Science

DOI

2022

Large eddy simulation study on trailing edge cutback cooling with a whisker lip

International Journal of Heat and Mass Transfer

DOI

2022

Thermal performance in latticework ducts with various endwall shapes for aero-craft turbine cooling

Aerospace Science and Technology

DOI

2022

Analysis of energy saving and thrust characteristics of rotating detonation turbine engine

Aerospace Science and Technology

DOI

2022

Deep learning method for fast prediction of film cooling performance

Physics of Fluids

DOI

2022

Analysis of enhanced turbulent heat transfer in a sharp turn channel having novel designed endwall with longitudinal vortex generator

International Communications in Heat and Mass Transfer

DOI

2022

Large-eddy simulation study of rotating detonation supersonic turbine nozzle generated by the method of characteristics under oscillating incoming flow

Physics of Fluids

DOI

2022

Dynamics study of shock wave intersection under high-frequency sine oscillation incoming flow

Physics of Fluids

DOI

2022

Flow mechanism of self-recirculating casing treatment in a low-reaction transonic compressor rotor

Aerospace Science and Technology

DOI

2022

Film Cooling in the Cutback for Trailing Edge With Different Incident Angles

Journal of Energy Resources Technology

DOI

2022

Numerical investigations on oscillating aspirations controlling separation flows in linear highly loaded compressor cascades

Frontiers in Energy Research

DOI

2022

Effect of compound lean blades on separation structures in high loaded compressor cascades under high subsonic condition

Frontiers in Energy Research

DOI

2022

Aerodynamic Comparison between Increasing Cascade Pitch and Turning Angle in the Highly-Loaded Design

Journal of Thermal Science

DOI

2022

Conjugate Heat Transfer Characteristics in a Vane Blade With Different Dimple/Protrusion/Pin Fin Configuration for Trailing Region

DOI

2022

Effects of varied bend turning vanes on flow control and heat transfer performance in a smooth two-pass channel

International Communications in Heat and Mass Transfer

DOI

2022

Experimental study on the augmented Nusselt number of the endwall through a square-sectioned sharp-turn channel using novel heat exchanger

International Journal of Heat and Mass Transfer

DOI

2022

Multi-Objective Optimization of Circumferential Groove Casing Treatment in an Ultra-Highly Loaded Low-Reaction Transonic Compressor Rotor

Frontiers in Energy Research

DOI

2022

Active Flow Control Based Bleed in an Axial Compressor Cascade Using Large Eddy Simulation

Frontiers in Energy Research

DOI

2022

Combined effects of bleed hole extraction and rotation on internal heat transfer in a ribbed two-pass channel

International Communications in Heat and Mass Transfer

DOI

2022

Numerical analysis of heat transfer characteristics in a pin fin-dimpled channel with different pin fins and dimple locations

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2022

Influence of spacing of a delta-winglet vortex generator pair on the flow behavior and heat transfer at the internal tip of gas turbine blades

International Journal of Thermal Sciences

DOI

2022

Design Methods and Strategies for Forward and Inverse Problems of Turbine Blades Based on Machine Learning

Journal of Thermal Science

DOI

2021

基于深度学习的单排孔气膜冷却性能预测

《航空学报》

2021

大转角涡轮叶栅复合弯曲定性分析与应用验证

《航空动力学报》

DOI

2021

叶顶压力侧小翼对跨声速涡轮级气动性能影响的数值研究

《推进技术》

DOI

2021

涡轮导叶冷却结构设计及性能分析

《热能动力工程》

DOI

2021

Numerical Study on the Biomimetic Trailing Edge of a Turbine Blade Under a Wide Range of Outlet Mach Numbers

Frontiers in Energy Research

DOI

2021

An experimental investigation on the thermal augmentation of internal endwall in a two-pass duct using an array of delta-winglet vortex generator pair

International Journal of Heat and Mass Transfer

DOI

2021

Direct and Inverse Model for Single-Hole Film Cooling With Machine Learning

Journal of Turbomachinery

DOI

2021

Heat transfer in the trailing region of gas turbines – A state-of-the-art review

Applied Thermal Engineering

DOI

2021

Flow structure and heat transfer characteristics of a pin-finned channel with upright/curved/inclined pin fins under stationary and rotating conditions

International Communications in Heat and Mass Transfer

DOI

2021

Study on leading-edge trenched holes arrangement under real turbine flow conditions

Engineering Applications of Computational Fluid Mechanics

DOI

2021

On heat transfer and flow characteristics of jets impingement on a concave surface with varying pin-fin arrangements

International Journal of Thermal Sciences

DOI

2021

Effect of divider wall-to-end wall distance on the vortical structures and heat transfer characteristics of two-pass channel using topological analysis

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2021

Film cooling in the trailing edge cutback with different land shapes and blowing ratios

International Communications in Heat and Mass Transfer

DOI

2021

Numerical study on the biomimetic trailing edge in the environment of a high-pressure turbine stage

Aerospace Science and Technology

DOI

2021

Flow structure and heat transfer characteristics in a ribbed two-pass channel with varying divider inclination angle

International Journal of Thermal Sciences

DOI

2021

On heat transfer and flow characteristics of jets impinging onto concave surface with varying bleeding arrangements

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2021

Design and performance analysis of a two-stage transonic low-reaction counter-rotating aspirated fan/compressor with inlet counter-swirl

Aerospace Science and Technology

DOI

2021

THERMAL PERFORMANCE IN A PIN FIN-DIMPLE/PROTRUSION DUCT WITH DIFFERENT OPTIMAL OBJECTIVES

Heat Transfer Research

DOI

2021

NUMERICAL STUDY ON THE EFFECT OF FILM COOLING ON BLADE TEMPERATURE AND STRESS

Heat Transfer Research

DOI

2020

扫频式射流对设计工况压气机叶栅流动分离影响的数值研究

《推进技术》

2020

直孔射流对压气机叶栅流场影响的实验研究

《推进技术》

DOI

2020

不同激励形式对脉动气膜冷却特性影响的数值研究

《推进技术》

DOI

2020

扫频式射流对涡轮叶栅间隙泄漏流动影响的数值研究

《推进技术》

DOI

2020

On the topology of vortex structures and heat transfer of a gas turbine blade internal tip with different arrangement of delta-winglet vortex generators

International Journal of Thermal Sciences

DOI

2020

On the heat transfer characteristics of a Lamilloy cooling structure with curvatures with different pin fins configurations

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2020

Vortex Structures Analysis and Loss Mechanisms in Axial Compressor Cascade With and Without Bleeding Slot Using Large Eddy Simulation

DOI

2020

Vortical structures and heat transfer augmentation of a cooling channel in a gas turbine blade with various arrangements of tip bleed holes

Numerical Heat Transfer Part A Applications

DOI

2020

Numerical investigation of flow field and heat transfer characteristics in a latticework duct with jet cooling structures

International Journal of Thermal Sciences

DOI

2020

A high temperature turbine blade heat transfer multilevel design platform

Numerical Heat Transfer Part A Applications

DOI

2020

Cooling structure design of gas turbine blade by using multi-level highly efficient design platform

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2020

Design, modification and optimization of an ultra-high-load transonic low-reaction aspirated compressor

Aerospace Science and Technology

DOI

2020

The compound bowing design in a highly loaded linear cascade with large turning angle

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2020

Influence of Inlet Swirl on Film Cooling of the Turbine Leading Edge

Heat Transfer Engineering

DOI

2020

Effect of tip clearance dimension on unsteadiness in a low-reaction aspirated transonic compressor rotor

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2019

变攻角下端壁非定常脉动抽吸对高负荷压气机叶栅性能的影响

《推进技术》

DOI

2019

设计工况下非轴对称端壁造型方法对涡轮动叶性能的影响

《大连海事大学学报》

DOI

2019

涡轮末级导叶顶部弯曲对气动影响的研究

《节能技术》

2019

CST造型方法在涡轮叶片前缘修型中的应用研究

《推进技术》

DOI

2019

基于燃气涡轮动叶的非轴对称端壁数值研究

《汽轮机技术》

2019

孔式非定常脉动抽吸控制高负荷压气机叶栅内流动分离的参数研究

《推进技术》

DOI

2019

轴流燃气涡轮气动设计中反动度可行域的研究

《推进技术》

DOI

2019

Numerical Investigation of Circumferential Groove Casing Treatment in a Highly-Loaded Low-Reaction Transonic Compressor Rotor

Journal of Thermal Science

DOI

2019

Large eddy simulation of the trenched film cooling hole with different compound angles and coolant inflow orientation effects

Applied Thermal Engineering

DOI

2019

The Effect of the Circumferential Position of Duct Hole on the Non-uniformity in the Axial Compressor

International Journal of Turbo and Jet Engines

DOI

2019

Effect of Leading-Edge Optimization on the Loss Characteristics in a Low-Pressure Turbine Linear Cascade

Journal of Thermal Science

DOI

2019

Effect of the Broken Rib Locations on the Heat Transfer and Fluid Flow in a Rotating Latticework Duct

ASME Journal of Heat and Mass Transfer

DOI

2019

Heat transfer characteristics of a dimpled/protrusioned pin fin wedge duct with different converging angles for turbine blades

Numerical Heat Transfer Part A Applications

DOI

2019

Improvement of film cooling performance by trenched holes on turbine leading-edge models

Numerical Heat Transfer Part A Applications

DOI

2019

Numerical Investigations on Oscillating Aspiration Control in High-Load Compressor Cascades

Journal of Propulsion and Power

DOI

2019

Heat transfer and flow structure in a detached latticework duct

Applied Thermal Engineering

DOI

2019

Heat Transfer Characteristics in a Rotating Pin Finned Duct With Different Protrusion Locations

Journal of Thermal Science and Engineering Applications

DOI

2019

Unsteady Numerical Simulation in a Supersonic Compressor Cascade with a Strong Shock Wave

International Journal of Turbo and Jet Engines

DOI

2019

Heat transfer and flow structure in a rotating duct with detached pin fins

Numerical Heat Transfer Part A Applications

DOI

2019

On the Heat Transfer and Flow Structures’ Characteristics of the Turbine Blade Tip Underside With Dirt Purge Holes at Different Locations by Using Topological Analysis

Journal of Turbomachinery

DOI

2019

The impact of various forward sweep angles on the performance of an ultra-high-load low-reaction transonic compressor rotor

Applied Thermal Engineering

DOI

2019

Effects of a sweeping jet actuator on aerodynamic performance in a linear turbine cascade with tip clearance

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2019

Correlation of solidity, aspect ratio and compound lean blade in compressor cascade design

Applied Thermal Engineering

DOI

2019

Vortex dynamic mechanism of curved blade affecting flow loss in compressor cascade during corner stall process

Aerospace Science and Technology

DOI

2019

Effects of Double-Side Labyrinth Seals on Aerodynamic Performance in a Transonic Shrouded Turbine Stage

Journal of Engineering for Gas Turbines and Power

DOI

2019

Heat Transfer and Flow Structure in a Latticework Duct With Different Sidewalls

ASME Journal of Heat and Mass Transfer

DOI

2019

Large eddy simulation of film cooling flow from round and trenched holes

International Journal of Heat and Mass Transfer

DOI

2019

EFFECT OF TURBULENCE MODEL ON THE PERFORMANCE OF AN ScO2 RADIAL TURBINE

Heat Transfer Research

DOI

2019

Enhanced heat transfer in a labyrinth channels with ribs of different shape

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2019

Heat Transfer Characteristics in a Pin Finned Channel With Different Dimple Locations

Heat Transfer Engineering

DOI

2019

Analysis of heat transfer and fluid flow of a slot jet impinging on a confined concave surface with various curvature and small jet to target spacing

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2019

Effect of tip clearance size on the performance of a low-reaction transonic axial compressor rotor

Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy

DOI

2019

Numerical investigation on the biomimetic trailing edge of a high-subsonic turbine blade

Aerospace Science and Technology

DOI

2019

Numerical Study of the Air Bleeding Caused Non-Uniformity in Axial Compressor

Journal of Thermal Science

DOI

2019

The influence of diversified forward sweep heights on operating range and performance of an ultra-high-load low-reaction transonic compressor rotor

Energy

DOI

2019

Modal analysis of trailing edge cutback film cooling

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2019

COMPUTATIONAL INVESTIGATION OF CURVATURE EFFECTS ON JET IMPINGEMENT HEAT TRANSFER AT INTERNALLY COOLED TURBINE VANE LEADING EDGE REGIONS

Heat Transfer Research

DOI

2019

On heat transfer and flow characteristics of jets impinging onto a concave surface with varying jet arrangements

Journal of Thermal Analysis and Calorimetry

DOI

2019

Numerical Study of Dual Sweeping Jet Actuators for Corner Separation Control in Compressor Cascade

Journal of Thermal Science

DOI

2018

轮缘曲线对低反力度跨声速高负荷转子性能影响的数值研究

《推进技术》

2018

跨声速涡轮叶片半劈缝长度及冷气量对叶栅流场的影响

《汽轮机技术》

2018

高压涡轮封严冷气对主流气动性能的影响

《航空动力学报》

2018

叶顶凹槽间隙气膜冷却的传热数值研究

《推进技术》

2018

高负荷低反动度吸附式风扇气动设计与性能分析

《推进技术》

2018

跨声速涡轮静叶尾缘激波对动叶前缘气膜冷却效果影响的研究

《推进技术》

2018

考虑涡轮传热性能的气动设计耦合计算方法研究

《推进技术》

2018

抽吸布局对弯曲叶栅气动性能的影响

《工程热物理学报》

2018

基于流动损失权重分配的扩压叶栅弯叶片优化探究

《工程热物理学报》

2018

变工况下轴向非均匀凹槽叶顶的实验研究

《工程热物理学报》

2018

高效高负荷高通流能力轴流风机气动设计参数选择与三维叶片技术

《风机技术》

2018

定常抽吸与非定常脉动抽吸对高负荷压气机叶栅性能的影响

《大连海事大学学报》

2018

Numerical investigation on the improved three-hole cooling unit with the trench

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2018

Numerical Study of Unsteady Pulsed Suction through Endwall Bleed Holes in a Highly Loaded Compressor Cascade

International Journal of Turbo and Jet Engines

DOI

2018

Flow structure and heat transfer characteristics in a 90-deg turned pin fined duct with different dimple/protrusion depths

Applied Thermal Engineering

DOI

2018

Multi-objective optimization of the dimple/protrusion channel with pin fins for heat transfer enhancement

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2018

Proper orthogonal decomposition analysis of boundary layer oscillating aspiration controlling separation flows in two-dimensional compressor cascades

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2018

Effect of the dimple location and rotating number on the heat transfer and flow structure in a pin finned channel

International Journal of Heat and Mass Transfer

DOI

2018

Investigation of the Vortex Dynamic Mechanism of the Flow Losses on a Transonic Compressor Stator

Journal of Thermal Science

DOI

2018

Heat transfer and flow characteristics of U-shaped cooling channels with novel wavy ribs under stationary and rotating conditions

International Journal of Heat and Mass Transfer

DOI

2018

Numerical Investigation of a Sweeping Jet Actuator for Active Flow Control in a Compressor Cascade

DOI

2018

Effect of Coolant Mass Flow Rate of Dirt Purge Hole on Heat Transfer and Flow Characteristics at a Turbine Blade Tip Underside

DOI

2018

Numerical Study of Blade Tip Cooling at High Speed With Tip and Pressure-Side Coolant Injections

DOI

2018

Research on the Applicability of Using a Curved Blade to Optimize the Flow Loss Weight Distribution of a Linear Compressor Cascade With Different Flow Separation Types

DOI

2018

Three-Dimensional Aerodynamic Optimization of Turbine Blade Profile Considering Heat Transfer Performance

DOI

2018

A Combined Application of Negative Bowed Blade and Endwall Unsteady Pulsed Holed Suction in a Highly Loaded Compressor Cascade

DOI

2018

Effect of Dimple/Protrusion Depth on Flow Structure and Heat Transfer in a Rotating Channel With Pin Fin

DOI

2018

Influence of Oscillating Boundary Layer Suction on Aerodynamic Performance in Highly-Loaded Compressor Cascades

DOI

2018

Computational investigation of the dust hole effect on the heat transfer and friction factor characteristics in a U bend channel

Applied Thermal Engineering

DOI

2018

Numerical Investigations of the Influence of Unsteady Vane Trailing Edge Shock Wave on Film Cooling Effectiveness of Rotor Blade Leading Edge

Journal of Thermal Science

DOI

2018

Thermal performance of angled, V-shaped and leaning-V-shaped ribs in a rotating rectangular channel with 45° orientation

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2018

Convergence angle and dimple shape effects on the heat transfer characteristics in a rotating dimple-pin fin wedge duct

Numerical Heat Transfer Part A Applications

DOI

2018

Thermal performance of blade tip and casing coolant injection on a turbine blade with cavity and winglet-cavity tip

International Journal of Heat and Mass Transfer

DOI

2018

Application of endwall contouring in a high-subsonic tandem cascade with endwall boundary layer suction

Aerospace Science and Technology

DOI

2018

Effect of Different Trench Lips on Downstream Film Cooling Effectiveness and Flow Fields

Journal of Thermal Science

DOI

2018

Flow Structure and Heat Transfer Characteristics of a Rectangular Channel With Pin Fins and Dimples With Different Shapes

Journal of Thermal Science and Engineering Applications

DOI

2018

Combined application of negative bowed blades and unsteady pulsed holed suction in a high-load compressor in terms of aerodynamic performance and energy efficiency

Applied Thermal Engineering

DOI

2018

Effect of axisymmetric endwall contouring on the high-load low-reaction transonic compressor rotor with a substantial meridian contraction

Aerospace Science and Technology

DOI

2018

Conjugated heat transfer investigation with racetrack-shaped jet hole and double swirling chamber in rotating jet impingement

Numerical Heat Transfer Part A Applications

DOI

2018

Numerical predictions on heat transfer and flow characteristics in a straight channel with different geometric parameters wavy ribs

Applied Thermal Engineering

DOI

2018

Numerical analysis of the weight distribution of flow losses in a highly loaded compressor cascade with different incidences

Applied Thermal Engineering

DOI

2018

A comparison of different unsteady flow control techniques in a highly loaded compressor cascade

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2018

Experimental study on axially non-uniform clearances in a linear turbine cascade with a cavity squealer tip

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2018

Flow structure and heat transfer characteristics of a 90°-turned pin-finned wedge duct with dimples at different locations

Numerical Heat Transfer Part A Applications

DOI

2018

Effects of continuous wavy ribs on heat transfer and cooling air flow in a square single-pass channel of turbine blade

International Journal of Heat and Mass Transfer

DOI

2017

尾缘造型及冷气喷射对跨声速涡轮叶栅损失的影响

《汽轮机技术》

2017

高温涡轮动叶冷却结构方案对比分析研究

《汽轮机技术》

2017

重型燃气轮机压气机多截面叶型优化设计

《航空动力学报》

2017

亚声速扩压叶栅中弯叶片积叠规律的研究

《推进技术》

2017

亚声速扩压叶栅中端弯积叠方式的研究

《推进技术》

2017

开口双肋凹槽式涡轮叶顶间隙流动数值研究

《推进技术》

2017

考虑冷气的某对转涡轮设计简述与流场分析

《工程热物理学报》

2017

槽道构型对吸附式叶栅损失及流场结构的影响

《工程热物理学报》

2017

轴向间距对低反力度压气机性能影响的二维非定常数值研究

《推进技术》

2017

高温涡轮导叶冷却结构方案对比分析研究

《节能技术》

2017

某型涡轮过渡段机匣子午型线数值研究

《节能技术》

2017

Flow separation control using unsteady pulsed suction through endwall bleeding holes in a highly loaded compressor cascade

Aerospace Science and Technology

DOI

2017

Flow control using unsteady pulsed holed suction with different excitation models in a highly loaded compressor cascade

Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy

DOI

2017

The effect of aspiration configuration on aerodynamic performance in compound lean compressor cascades of gas turbines

Applied Thermal Engineering

DOI

2017

Aerodynamic Optimization of Winglet-Cavity Tip in an Axial High Pressure Turbine Stage

International Journal of Turbo and Jet Engines

DOI

2017

Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs

Applied Thermal Engineering

DOI

2017

The synergistic effect between compound lean and aspiration on aerodynamic performance in compressor cascades

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2017

A combination application of tandem blade and endwall boundary layer suction in a highly loaded aspirated compressor outlet vane

Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy

DOI

2017

Aerodynamic Design and Analysis of a Two-Stage High-Load Low-Reaction Transonic Aspirated Counter-Rotating Compressor

DOI

2017

Influence of Tailored Boundary Layer Suction on Aerodynamic Performance in Bowed Compressor Cascades

DOI

2017

Numerical Prediction of 45° Angled Ribs Effects on U-shaped Channels Heat Transfer and Flow under Multi Conditions

International Journal of Turbo and Jet Engines

DOI

2017

CONVERGENCE ANGLES EFFECT ON HEAT TRANSFER CHARACTERISTICS IN A WEDGED DUCT WITH DIMPLES/PROTRUSIONS

Heat Transfer Research

DOI

2017

Correlation of solidity and curved blade in compressor cascade design

Applied Thermal Engineering

DOI

2017

Unsteady winglet-cavity tip on leakage flow in a high-pressure turbine stage of low-aspect ratio

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2017

Flow structure and heat transfer characteristics of a dimpled wedge channel with a bleed hole in dimple at different orientations and locations

International Journal of Heat and Mass Transfer

DOI

2017

Experiment study of aerodynamic performance for the suction-side and pressure-side winglet-cavity tips in a turbine blade cascade

Experimental Thermal and Fluid Science

DOI

2017

Application and Design of Multi-Impingement Cooling Channel in Turbine Blade Trail Edge

International Journal of Turbo and Jet Engines

DOI

2017

Experiment study of the winglet-cavity tip on the aerodynamic performance in a turbine cascade

Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy

DOI

2017

Multi-objective optimization of a solar receiver considering both the dimple/protrusion depth and delta-winglet vortex generators

Energy

DOI

2017

Effect of Blade Aspiration Slot Configuration on the Aerodynamic Performance of a Highly Loaded Aspirated Compressor Cascade

DOI

2016

某跨音速气冷涡轮三维气动优化设计研究

《汽轮机技术》

2016

冷气对多级涡轮翘曲S1流面优化的影响

《推进技术》

2016

叶顶不同位置喷气对涡轮间隙泄漏流动的影响

《推进技术》

2016

端弯联合弯叶片对叶栅旋涡结构和气动性能的影响

《推进技术》

2016

多级吸附式压气机末级静子叶型构型方法研究

《工程热物理学报》

2016

多级低反力度静子吸附式压气机气动设计

《工程热物理学报》

2016

采用复杂三维气动布局的高负荷压气机气动设计研究

《工程热物理学报》

2016

凹型轴对称端壁造型在大安装角扩压叶栅中的应用研究

《推进技术》

2016

跨音速气冷涡轮S1流面气动优化设计研究

《节能技术》

2016

Aerodynamic optimisation of a winglet-cavity tip in a high-pressure axial turbine cascade

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2016

Parametric influence on convective heat transfer for an outlet guide vane

Numerical Heat Transfer Part A Applications

DOI

2016

3D Unsteady Simulation of a Low Speed Low-Reaction Aspirated Compressor

DOI

2016

EFFECTS OF PIN FIN CONFIGURATIONS ON HEAT TRANSFER AND FRICTION FACTOR IN AN IMPROVED LAMILLOY COOLING STRUCTURE

Heat Transfer Research

DOI

2016

Thermal enhancement by using grooves and ribs combined with delta-winglet vortex generator in a solar receiver heat exchanger

Applied Energy

DOI

2016

Numerical investigation of boundary layer suction on certain highly loaded aspirated compressor at low speeds

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2016

On the solar receiver thermal enhancement by using the dimple combined with delta winglet vortex generator

Applied Thermal Engineering

DOI

2016

Heat transfer and friction factor in a dimple-pin fin wedge duct with various dimple depth and converging angle

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2016

Influence of Trailing Edge Coolant Ejection Rate and Cut-Back Length on Energy Loss and Shockwave Intensity of a Transonic Turbine Blade

DOI

2015

超声速低反力度吸附式压气机变工况特性

《航空动力学报》

2015

考虑冷气的多级涡轮翘曲S1流面的气动优化

《航空动力学报》

2015

扩压叶栅最佳弯叶片生成线与稠度的关系

《机械工程学报》

2015

间隙流动对低反动度跨声速转子气动性能影响

《推进技术》

2015

转静干涉对跨声速吸附式压气机流场的影响分析

《推进技术》

2015

燃气涡轮无气膜冷却动叶参数化设计系统应用

《推进技术》

2015

深凹槽式涡轮叶顶间隙泄漏直列叶栅实验研究

《工程热物理学报》

2015

基于高精度WENO格式的平面叶栅内流大涡模拟

《工程热物理学报》

2015

亚声速低反力度吸附式压气机的非定常数值研究

《中国电机工程学报》

2015

基于主/被动联合控制技术设计的高负荷扩压叶栅内部流场结构研究

《推进技术》

2015

Endwall heat transfer and aerodynamic performance of bowed outlet guide vanes (OGVs) with on- and off-design conditions

Numerical Heat Transfer Part A Applications

DOI

2015

COMPUTATIONAL INVESTIGATION OF DIMPLE EFFECTS ON HEAT TRANSFER AND FRICTION FACTOR IN A LAMILLOY COOLING STRUCTURE

Enhanced heat transfer/Journal of enhanced heat transfer

DOI

2015

OPTIMIZATION OF THE BLADE PROFILE AND COOLING STRUCTURE IN A GAS TURBINE STAGE CONSIDERING BOTH THE AERODYNAMICS AND HEAT TRANSFER

Heat Transfer Research

DOI

2015

Heat transfer and friction factor performance in a pin fin wedge duct with different dimple arrangements

Numerical Heat Transfer Part A Applications

DOI

2015

Investigation of Positively Curved Blade in Compressor Cascade Based on Transition Model

International Journal of Turbo and Jet Engines

DOI

2014

燃气涡轮无气膜动叶的内流流场和气热耦合计算

《汽轮机技术》

2014

吸附式低反动度轴流压气机气动设计原理

《航空动力学报》

2014

基于动叶出口轴向速度提升的亚声速低反动度轴流压气机气动设计原理及其验证

《航空动力学报》

2014

一种对转压气机气动设计方法及其验证

《航空动力学报》

2014

燃气涡轮静叶考虑叶型及冷却结构的气热耦合优化

《工程热物理学报》

2014

间隙大小对高负荷压气机叶栅流动特性的影响

《工程热物理学报》

2014

燃气涡轮无气膜动叶设计流程及分析

《节能技术》

2014

高负荷跨音速压气机转子气动设计及附面层抽吸研究

《节能技术》

2014

气冷涡轮前缘冷气射流角度优化研究

《推进技术》

2014

扩压叶栅最佳弯叶片生成线与进口马赫数之间的关系

《推进技术》

2014

燃气涡轮静叶冷却结构设计流程及分析

《节能技术》

2014

基于转捩模型的吸附式压气机正弯叶片数值研究

《推进技术》

2014

孔式抽吸对带间隙高负荷压气机性能的影响

《推进技术》

2014

叶型对扩压叶栅角区分离的影响

《推进技术》

2014

子午造型对低反动度跨声速转子气动性能影响

《推进技术》

2014

轴向间距变化对低压涡轮定常与非定常气动性能影响的数值研究

《推进技术》

2014

气热耦合条件下涡轮动叶叶型与冷却结构优化

《推进技术》

2014

气热耦合条件下涡轮静叶三维优化

《推进技术》

2014

Experimental research of surface roughness effects on highly-loaded compressor cascade aerodynamics

Journal of Thermal Science

DOI

2014

Influence of Additional Leading-Edge Surface Roughness on Performances in Highly Loaded Compressor Cascade

International Journal of Turbo and Jet Engines

DOI

2014

Relationship Between Optimum Curved Blade Generate Line and Cascade Parameters in Subsonic Axial Compressor

DOI

2014

Effects of Tip Injection on Tip Clearance Flow in a Low-Pressure Turbine Stator Cascade

DOI

2014

Effect of Three Dimensional Blade Technology on Flow Behavior in Centrifugal Fan

Journal of Mechanical Engineering

DOI

2013

高性能低压涡轮设计与试验

《燃气涡轮试验与研究》

2013

某高压涡轮第一级导叶传热设计计算

《哈尔滨工业大学学报》

2013

传热设计流程在涡轴涡轮冷却中的应用

《推进技术》

2013

涡轮第二级导叶冷却结构设计研究

《节能技术》

2013

合成射流控制高负荷扩压叶栅分离数值研究

《工程热物理学报》

2013

叶片吸力侧反曲率设计对流道内激波强度影响的研究

《节能技术》

2013

考虑气膜冷却的涡轮静叶多目标优化

《工程热物理学报》

2013

附面层吸除对带间隙的高负荷压气机叶栅流动特性影响的实验研究

《工程热物理学报》

2013

跨声速风扇气动设计及非定常流场结构研究

《工程热物理学报》

2013

吸附式低反动度超、跨音速轴流压气机气动设计原理及其验证

《推进技术》

2013

弯曲叶片造型对涡轮叶栅作用力影响的非定常数值研究

《推进技术》

2013

考虑气膜冷却的涡轮静叶三维优化

《推进技术》

2013

端壁采用孔式抽吸对扩压叶栅气动性能的影响

《推进技术》

2013

采用附面层抽吸孔改善高负荷扩压叶栅性能的研究

《工程热物理学报》

2013

基于超声速冲动式转子的下游静叶气动设计方法研究

《推进技术》

2013

低反动度高负荷超声速轴流压气机气动设计方法

《航空动力学报》

2013

Aerodynamic design of a highly loaded supersonic aspirated axial flow compressor stage

Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy

DOI

2013

Control of Flow Separations in Compressor Cascade by Boundary Layer Suction Holes in Suction Surface

DOI

2013

Effect of Boundary Layer Suction on Aerodynamic Performance of High-Turning Compressor Cascade

DOI

2013

Full Three-Dimensional Optimization Platform of Turbine Blades Considering the Film Cooling

DOI

2013

Numerical Investigation of Corner Separation on Compressor Cascade

DOI

2013

Study of Aerodynamic Design Method for Downstream Stator Based on Supersonic Impulse Rotors

Journal of Propulsion Technology

2013

Experimental study of the impact of hole-type suction on the flow characteristics in a high-load compressor cascade with a clearance

Experimental Thermal and Fluid Science

DOI

2013

The effect of different clearance geometry configurations on aerodynamic performance in a high-load compressor cascade

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2013

Influence of Local Surface Roughness of Rotor Blade on Performance of an Axial Compressor Stage

DOI

2013

Cooling Construction Design for the Second Guiding Blade of a Turbine

Energy Conservation Technology

2012

基于内部流场分析的离心风机改型设计

《节能技术》

2012

轴流压气机级内污垢沉积影响的数值研究

《推进技术》

2012

端弯联合弯叶片对扩压叶栅角区分离影响研究

《工程热物理学报》

2012

气冷涡轮级流场的数值模拟方法与试验验证

《航空动力学报》

2012

基于动叶污垢沉积的数值模拟

《航空动力学报》

2012

多级涡轮气动设计与优化的研究

《推进技术》

2012

蜗壳开度对离心风机气动性能影响的研究

《风机技术》

2012

高压涡轮采用非轴对称端壁的研究

《节能技术》

2012

Numerical investigation on effectiveness of flow separation control in two-dimensional high-load compressor cascade by synthetic jet

Journal of Thermal Science

DOI

2012

Impact of Different Film-Cooling Modes at Leading Edge on the Aerodynamic and Heat Transfer Performance of Heavy Duty Gas Turbine

Asia-Pacific Power and Energy Engineering Conference (APPEEC)

DOI

2012

A High-Loaded Supersonic Axial Compressor Aerodynamic Design Principle

ASME Gas Turbine India Conference (GTINDIA)

DOI

2012

Multi-Dimensional Platform for Cooling Design of Air-Cooled Turbine Blades

Volume 4: Heat Transfer, Parts A and B

DOI

2012

Study on the Impact of Fouling on Axial Compressor Stage

DOI

2012

Redesigning of Flow Path Using Tip-Cutting in Heavy Duty Gasturbine Compressor

Asia-Pacific Power and Energy Engineering Conference (APPEEC)

DOI

2012

Study on Numerical Simulation of Fouling in Compressor Rotor

International Journal of Turbo and Jet Engines

DOI

2012

Research of Non-axisymmetric Endwall Application on High Pressure Turbine

Energy Conservation Technology

2011

涡轮动叶冷却结构设计方法Ⅲ:气热耦合计算

《工程热物理学报》

2011

涡轮动叶冷却结构设计方法Ⅱ:管网计算

《工程热物理学报》

2011

涡轮动叶冷却结构设计方法Ⅰ:参数化设计

《工程热物理学报》

2011

端壁不同角度喷射冷气对前缘喷射冷气重型燃气轮机涡轮流场的影响

《节能技术》

2011

民用航空发动机气冷涡轮技术发展研究

《节能技术》

2011

燃气轮机高压涡轮动静叶非定常干涉数值研究

《汽轮机技术》

2011

低压涡轮低雷诺数条件下气动性能分析

《汽轮机技术》

2011

F级中低热值燃料燃气轮机透平部分气动方案优化设计与分析

《中国电机工程学报》

2011

Impact of Aerodynamic Performance by the Heat Value of Fuel Change on the Turbine Cascade of Ground Heavy Duty Gas Turbine

Asia-Pacific Power and Energy Engineering Conference (APPEEC)

DOI

2010

弯叶片对压气机静叶根部间隙泄漏流动的影响

《动力工程学报》

2010

某型涡轮叶片型面匹配优化设计

《汽轮机技术》

2010

地面重型燃气轮机压气机叶型的优化设计

《汽轮机技术》

2010

冷气喷射法控制激波强度的数值研究

《航空动力学报》

2010

Design optimization of transonic compressor stage using CFD and response surface model

Journal of Harbin Institute of Technology(New series)

2010

Optimization Design on Ground-based Heavy-duty Gas Turbine Compressor Blades

Turbine Technology

2009

高负荷氦气压气机的气体流动特点与改型设计

《核动力工程》

2009

具有前缘凹陷特征的气冷涡轮叶型研究

《航空动力学报》

2009

低反动度附面层抽吸式压气机及其内部流动控制

《工程热物理学报》

2009

压气机分层优化气动设计体系研究

《热能动力工程》

2009

多级低反动度高负荷轴流压气机及其内部流动机理研究

《工程热物理学报》

2009

燃气涡轮机气冷涡轮气动设计体系设计思想及其应用

《工程热物理学报》

2009

采用附面层抽吸(BLS)控制流动分离的数值模拟

《推进技术》

2009

Study on the effects of end-bend cantilevered stator in a 2-stage axial compressor

Journal of Thermal Science

DOI

2009

Study of Rectangular Cascades with Blowing Slot Under Different Incidences

Turbine Technology

2009

Numerical Study on End-Wall Flow in Highly Loaded Supercritical Compressor Cascades

DOI

2008

跨音风扇顶部激波、泄漏流作用的数值研究

《工程热物理学报》

2008

高压离心压气机导叶流场的附面层抽吸控制研究

《推进技术》

2008

多级涡轮多工况气动优化设计研究

《航空动力学报》

2008

多级涡轮三维气动优化设计的可行性分析与实现

《热能动力工程》

2008

单级低反动度轴流压气机的气动设计与分析(英文)

Chinese Journal of Aeronautics

2008

扩压叶栅二维流动分离的数值模拟

《工程热物理学报》

2008

考虑冷气掺混的涡轮分层次气动优化设计体系

《工程热物理学报》

2008

吸气/喷气叶栅的三维贴体网格生成技术

《航空发动机》

2008

Multi-Objective Aerodynamic Design Optimization Based on Camber Line and Thickness Distribution for a Transonic Compressor Rotor

DOI

2008

A New Design Concept of Highly-Loaded Axial Flow Compressor by Applying Boundary Layer Suction and 3D Blade Technique

DOI

2008

A Study of Parameter Selection Principle and Internal Flow Mechanism in a Multi-Stage Low-Reaction Axial Flow Compressor

DOI

2008

The Numerical Study of a New Air-Cooled Turbine Blade With Depression Feature at Leading Edge

DOI

2008

Aerodynamic design by jointly applying S2 flow surface calculation and modern optimization methods on multistage axial turbine

Frontiers of Energy and Power Engineering in China

DOI

2008

3D Body-Fitted Grid Generation Technology of Cooling/Bleed Blade Cascades

Aeroengine

2007

某氦气压气机三维优化设计

《热能动力工程》

2007

考虑冷气组分扩散的气冷涡轮流场的数值模拟

《工程热物理学报》

2007

叶片弯曲对大折转压气机叶栅内分离结构的影响

《推进技术》

2007

对不同转角扩压叶栅内弯叶片的数值模拟

《推进技术》

2007

联合应用现代优化方法与S2流面计算进行多级涡轮的气动设计

《燃气涡轮试验与研究》

2007

Highly-Loaded Low-Reaction Boundary Layer Suction Axial Flow Compressor

DOI

2007

The Three-dimensional Optimized Design of a Helium Compressor

Journal of Engineering for Thermal Energy and Power

2006

壁面吸气抑制分离减少流动损失的研究

《工程热物理学报》

2006

采用壁面吸气改善叶栅性能的数值模拟

《动力工程学报》

2006

低反动度高负荷轴流压气机设计

《节能技术》

2006

冲角对压气机叶栅内二次涡的影响

《航空动力学报》

2006

叶片弯曲对气冷涡轮叶栅气动性能影响的数值研究

《航空动力学报》

2006

端壁附面层抽吸对扩压叶栅内分离结构的影响

《热能动力工程》

2006

某型气冷涡轮级的三维优化设计

《热能动力工程》

2006

Variation of Vortex Structure in a Compressor Cascade at Different Incidences

Journal of Propulsion and Power

DOI

2006

Design of a Low-Reaction & High-loaded Axial Flow Compressor

Energy Conservation Technology

2005

基于耗散函数的叶顶泄漏流动非定常数值模拟

《节能技术》

2005

气冷涡轮级叶栅非定常流场数值模拟

《工程热物理学报》

2005

端壁翼刀控制压气机叶栅二次流的机理研究

《空气动力学学报》

2005

Numerical Study of the Effects of Bowed Blades on Aerodynamic Characteristics in a High Pressure Turbine

DOI

2004

弯曲动叶对跨音轴流压气机性能的影响

《工程热物理学报》

2004

几何参数对涡轮低压导向器变工况性能的影响

《航空动力学报》

2004

涡轮低压导向器优化前后气动性能对比实验研究

《航空动力学报》

2004

不同高度端壁翼刀对压气机叶栅二次流影响的数值模拟

《航空动力学报》

2004

不同长度端壁翼刀对压气机叶栅二次流影响的数值研究

《航空动力学报》

2004

前置导叶对两种涡轮导向器及涡系结构的影响

《推进技术》

2004

叶片前缘喷气对大转角涡轮平面叶栅气动性能的影响

《推进技术》

2004

涡轮叶栅前缘气膜冷却对气动参数影响的数值研究

《推进技术》

2004

串列叶栅后排静叶周向位置对压气机性能影响的数值研究

《工程热物理学报》

2004

涡轮导向器几何与气动参数对通道涡影响的实验与数值研究

《航空学报》

2004

涡轮叶栅双排孔气膜冷却数值模拟

《工程热物理学报》

2004

Numerical Simulation of the Influence of Endwall Fence Height on the Secondary Flow in Compressor Cascade

Journal of Aerospace Power

2004

Calculation of the Energy Loss for Tip Leakage Flow in Turbines

Chinese Journal of Aeronautics

DOI

2004

The Influence of Endwall Wing Fence Length on Secondary Flow in Compressor Cascade

Journal of Aerospace Power

2004

A comparative analysis of 3D flow fields between straight and bowed blades in a steam turbine

Journal of Harbin Institute of Technology(New series)

2003

流道几何参数对低压导向器气动性能的影响

《热能动力工程》

2003

涡轮叶栅气热耦合数值模拟

《工程热物理学报》

2003

涡轮三维叶栅的气热耦合数值模拟

《工程热物理学报》

2003

平面叶栅中冷气射流三维分离的数值模拟

《推进技术》

2003

涡轮叶栅冷气掺混数值模拟方法

《航空动力学报》

2003

涡轮叶栅前缘气膜冷却数值模拟

《航空动力学报》

2003

叶片前缘喷气对大转角涡轮弯叶栅流场结构的影响

《航空发动机》

2002

航空发动机数值仿真试验台建立中几个关键技术问题的讨论

《航空动力学报》

2002

子午扩张流道中叶片积叠线形式对损失的影响

《推进技术》

2002

叶片弯曲对压气机叶栅气动性能影响的数值模拟

《空气动力学学报》

2002

弯扭掠三维叶片综合流型与流场结构优化的设计思想及应用——弯扭掠叶片设计体系与设计思想研究之二

《航空发动机》

2002

具有弯扭掠叶片流场结构分析能力的燃气涡轮三维设计体系——弯扭掠叶片设计体系与设计思想研究之一

《航空发动机》

2002

透平叶片中的二次流旋涡结构的研究

《工程热物理学报》

2002

The Tip and Hub Leakage Flow of a Repeated Two Stage Compressor

DOI

2001

涡轮发动机三维多场耦合数值仿真的数学模型

《上海理工大学学报》

2001

不同攻角下叶片弯曲对涡轮静叶流场的影响

《上海理工大学学报》

2001

动静叶相互干涉的三维非定常流场数值模拟

《上海理工大学学报》

2001

涡轮动叶采用弯叶片的数值模拟及流场结构分析

《工程热物理学报》

2001

大扩张角子午流道型线对损失的影响

《推进技术》

2001

涡轮高压导叶流场结构及损失分析

《推进技术》

2001

某型两级涡轮流场数值模拟

《热能动力工程》

2001

Numerical Simulation of 3D Flow Field Structure in Turbine Cascade With Bowed Blades

Volume 1: Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery

DOI

2000

叶片弯曲对跨音速涡轮叶栅流场的影响

《热能动力工程》

2000

正弯叶片降低叶栅内部损失的数值模拟

《热能动力工程》

2000

适用于航空涡轮全三维设计的气动设计体系

《推进技术》

2000

尾喷管内部及其射流流场的数值模拟

《推进技术》

2000

叶栅内冷气射流场结构的数值模拟

《航空动力学报》

2000

考虑动叶顶部间隙影响的跨音涡轮级的数值模拟

《航空动力学报》

2000

子午扩张对涡轮内旋涡结构影响的数值模拟

《航空动力学报》

2000

通道涡稳定性及对损失的影响

《工程热物理学报》

2000

基于区域分解算法的叶顶间隙流场的数值模拟

《工程热物理学报》

1999

正弯涡轮叶栅内旋涡结构的数值模拟

《航空动力学报》

1999

某型两级涡轮变比热容三维定常流场的数值模拟

《推进技术》

1999

涡轮级三维粘性流场的数值模拟

《航空动力学报》

1999

三维粘性流数值计算在多级透平中的应用

《推进技术》

1999

具有TVD性质的三阶精度GODUNOV格式在粘性流场计算中的应用

《工程热物理学报》

1997

高精度TVD有限差分格式的自由梯度条件

《工程热物理学报》

Aerodynamic and heat transfer performance of double-jet film cooling using internal crossflow supply configuration

International journal of thermal sciences

DOI

2011

端壁不同角度冷气喷射对重型燃气轮机涡轮叶栅气动性能的影响

Proceedings of the 2011 International Conference on Software Engineering and Multimedia Communication（SEMC 2011 V1）

2011

F级地面重型燃气轮机三级涡轮和四级涡轮气动性能对比分析

Proceedings of the 2011 International Conference on Software Engineering and Multimedia Communication（SEMC 2011 V1）

2011

附面层抽吸对压气机叶栅性能的影响

2011 International Conference on Machine Intelligence（ICMI 2011 V4）

2007

导叶根部间隙对压气机性能影响的数值研究

《中国动力工程学会透平专业委员会2007年学术研讨会论文集》

2021

Experimental Study of Augmented Heat Transfer on the Endwall of a Square-Sectioned Sharp-Turn Channel Using Novel-Type Vortex Generators

SSRN Electronic Journal

DOI

2024

Flow Analysis of Tandem Blades as the Outlet Vane of a Highly Loaded Compressor

Journal of Thermal Science

DOI

2018

Flow Mechanisms in Low-Pressure Turbines

Springer eBooks

DOI

2018

Aerodynamic Design Technologies for Turbines

Springer eBooks

DOI

2018

Flow Control Technologies

Springer eBooks

DOI

2018

Flow Mechanism in Turbine Rear Frame Ducts

Springer eBooks

DOI

2018

Multidisciplinary Coupling Analysis and Design

Springer eBooks

DOI

2018

Flow Mechanism in Inter Turbine Ducts

Springer eBooks

DOI

2018

Flow Mechanism in High Pressure Turbines

Springer eBooks

DOI

2018

Fundamental Concepts

Springer eBooks

DOI

2018

Axial Turbine Aerodynamics for Aero-engines

Springer eBooks

DOI

2022

10.1063/5.0110802.1

Default Digital Object Group

DOI

2022

10.1063/5.0110802.4

Default Digital Object Group

DOI