蔡明晖｜东北大学｜学者主页

2026

ω-mediated twinning induced by fully constrained heterostructure improves the deformability of the non-recrystallized body-centered cubic phase in a Cr-rich CrFeNi alloy

Lihao Hu, Xinlei Gu, Xiaoru Xu, Xiaonan Wang, Zixun Wei, Lu Zhang, Guangping Zheng, Yiwen Su, Naifu Zou, Enzhi Gao, Jie Wang, R Zhang, Minghui Cai

Materials Science and Engineering A

DOI

2026

Engineering heterostructures for strength-ductility synergy in an FCC Al0.3CoCrFeNi high-entropy alloy via elevated-temperature rolling

Kang Zhang, Kang Zhang, Yue Liu, Na Xiao, Kaichao Zhang, Kaichao Zhang, Lei Li, 闫海乐, Lu ZHANG, Haile Yan, Peter Damian Hodgson, Minghui Cai

Materials Science and Engineering A

DOI

2026

Ag-induced mechanical softening in 304 stainless steel and its deformation mechanisms

Yao He, Jianxing Zhang, Wei Peng, Yongxin An, Peter Damian Hodgson, Minghui Cai, Han Dong

Materials Science and Engineering A

DOI

2025

Multiple deformation mechanisms contribute to the exceptional ductility of a high-Cr FeCrNi multi-principal element alloy

Yating Lin, Jin-Rong Wang, Lihao Hu, Lu Zhang, Li Zhang, Minghui Cai, Rui Zhang, Jianxin Yu

Materials Science & Engineering: A

DOI

2025

Enhancing ductility in Al0.3CoCrFeNi high-entropy alloy through strain-controlled grain boundary engineering

Kang Zhang, Yue Liu, Na Xiao, Lu Zhang, Hai-Le Yan, Peter Hodgson, Lei Li, Minghui Cai

Materials Science & Engineering: A

DOI

2025

The effect of the interaction between recrystallization and precipitation on the heterogeneous microstructure and tensile properties in a heavily cold–rolled Al0.3CoCrFeNi high–entropy alloy

Kang Zhang, Yue Liu, Lili Wu, Ning Zhang, Lei Li, Lu Zhang, Haile Yan, Peter Hodgson, Minghui Cai

Journal of Alloys and Compounds

DOI

2025

Anomaly in the elastic modulus of metastable β Ti-10V-2Fe-3Al alloy with α+β dual-phase

Kai-Chao Zhang, Chao Lv, Kai Wang, Yueyin Ma, Wen-Long Wu, Zhaolin Wang, Wen-Long Xiao, Minghui Cai, Li-Chun Qi, Xin-Qing Zhao

Journal of Materials Science & Technology

DOI

2025

Unraveling temperature-dependent superplastic deformation and microstructure evolution in warm-rolled Fe-10Mn-4Al-1.5Si-0.3C medium Mn steel

H.T. Zhang, Nan Xiao, S.H. Sun, X.K. Gao, Haile Yan, Minghui Cai

Materials Science and Engineering A

DOI

2025

Effects of texture and mechanical anisotropy on the superplastic behavior in warm-rolled Fe–10Mn–4Al–1.5Si–0.3C medium Mn steel

H.T. Zhang, Nan Xiao, S.H. Sun, Haile Yan, Minghui Cai

Materials Science and Engineering A

DOI

2025

The Effect of Ti and Mo Microalloying on Hydrogen Embrittlement Resistance of Ultra-High Strength Medium Mn Steel

P. Zhang, Yang Zhao, Jianglong Pan, Weizhuo Hao, Shuyi Wang, Minghui Cai

Metals

DOI

2025

Achieving Superior Superplasticity of ~ 1200 pct in Medium Mn Lightweight Steel Containing Coarse δ-Ferrite via Dynamic γ → α Transformation

H. T. Zhang, Na Xiao, S. H. Sun, W. Z. Hao, Pengfei Zhang, Haile Yan, Minghui Cai, Young‐Kook Lee

Metallurgical and Materials Transactions A

DOI

2025

Unraveling the deformation-induced ferrite transformation mechanism and elemental partitioning behavior during hot deformation of medium Mn steel: A case study on Fe–6Mn–1Al–0.2C steel

Hongti Zhang, Nan Xiao, T.C. Ma, Xinliu Gao, Haile Yan, Minghui Cai, Young‐Kook Lee

Materials Characterization

DOI

2025

Exploring hot deformation mechanism and precipitation behavior of Fe–5.6Mn–0.18C–1.1Al(–0.1Ti–0.22Mo) steels through physical modeling and microstructure characterization

Hongti Zhang, H.Y. Li, Nan Xiao, S.H. Sun, Haile Yan, Minghui Cai, Young‐Kook Lee

Journal of Materials Research and Technology

DOI

2024

激光定向能量沉积15-5PH不锈钢微观组织和性能

吴梦园，杨季鑫，胡晓圻，蔡明晖，农晓东，王瑞，毕云杰

《激光与光电子学进展》

2024

超快冷工艺对DP780热轧带钢组织性能的影响

孙丽荣，丁敬国，万佳峰，蔡明晖

《轧钢》

DOI

2024

轧制温度对SPHC热轧带钢氧化铁皮的影响

杜宇航，王克柱，展英姿，杨贵玲，李贺，丁桦，蔡明晖

《材料与冶金学报》

2024

Study on the influence of κ-carbide on the high temperature flow behavior of the medium-Mn lightweight steel: modeling and characterization

Degang Liu, Zi-Kai Tong, D. Han, H. Ding, Minghui Cai, Kai Zhao, Hui Li, Si-Zhe Niu

Materials Science & Engineering: A

DOI

2024

Enhancing cryogenic mechanical properties of a cost-effective FeCrNi dual-phase multi-principal element alloy by fully constrained heterostructure and deformation twinning

Jinrong Wang, Anguo Wang, Lu Zhang, Lu Zhang, Junyang Wang, Li Zhang, Li Zhang, Rui Zhang, Minghui Cai, Jianxin Yu, Baolin Wu

Materials Science and Engineering A

DOI

2024

Ti-Mo microalloyed medium Mn steels: Precipitation and strengthening mechanism

ShiZhao Wang, C.Z. Wang, Huaying Li, D.F. Xu, H.T. Zhang, Nan Xiao, Minghui Cai, Young‐Kook Lee

Materials Science and Engineering A

DOI

2024

Enhancing mechanical properties of high Cr dual-phase FeCrNi medium-entropy alloy through mutual phase transformation and grain refinement

Zhaohui Hu, Yating Lin, Lu Zhang, Anguo Wang, Junyang Wang, Rui Zhang, Minghui Cai, Jianxin Yu, Baolin Wu

Materials Science and Engineering A

DOI

2024

Superplastic deformation behavior of low Al–added medium Mn steels with and without Ti and Mo elements

Pufan Yuan, Hongtao Zhang, Qi Chao, Chenyu Sun, Bowen Jia, Shuai Tang, Haile Yan, Peter Damian Hodgson, Minghui Cai

IOP Conference Series Materials Science and Engineering

DOI

2023

控轧控冷对Ti-Mo-Nb复合微合金化低碳钢组织和力学性能的影响

张金城，孙胜辉，蔡明晖，赵文柱，丁桦

《金属热处理》

2023

奥氏体基Fe-Mn-Al-C轻质钢的研究进展

丁桦，张宇，蔡明晖，唐正友

《金属学报》

2023

合金元素含量对汽车大梁用610L钢组织与性能的影响

杨文卿，师可新，董军海，孙胜辉，蔡明晖，张晓明，丁桦

《金属热处理》

2023

钢铁材料超塑性研究现状与发展

张鸿涛，李凯华，孙胜辉，闫海乐，丁桦，蔡明晖

《材料与冶金学报》

2023

Impact of W alloying on microstructure, mechanical property and corrosion resistance of face-centered cubic high entropy alloys: A review

Na Xiao, Xu Guan, Dong Wang, Haile Yan, Minghui Cai, Nan Jia, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo

International Journal of Minerals Metallurgy and Materials

DOI

2023

High Ductile Medium Mn Lightweight Alloy: The Role of Intensive Quenching and Deep Cryogenic Treatment

Fan Fei, Shenghui Sun, Ziqiang Wei, Huiwen Li, Minghui Cai

Metals

DOI

2023

Effect of grain interior and grain boundary κ-carbides on the strain hardening behavior of medium-Mn lightweight steels

Degang Liu, Hua Ding, Dong Han, Minghui Cai

Materials Science and Engineering A

DOI

2023

Study on the growth mechanism of the internal oxide layer in 9% Ni cryogenic steel

Hegang Du, Haoran Sun, Minghui Cai, Xiurong Zuo

Frontiers in Materials

DOI

2023

Improved Mn–segregation bands and its influence on deformation behavior in a severely warm–rolled 10Mn lightweight steel

Shenghui Sun, Huaying Li, Hongshou Huang, Hua Ding, Hossein Beladi, Peter Damian Hodgson, Minghui Cai

Vacuum

DOI

2023

The effect of Ti-Mo additions on microstructural evolution and superplastic deformation behavior of cold–rolled medium Mn steels

H.T. Zhang, Huaying Li, Haile Yan, Shuai Tang, Hossein Beladi, Peter Damian Hodgson, Minghui Cai

Materials Characterization

DOI

2022

Achieving ultra-high elongation of 1401% in a warm-rolled medium Mn lightweight steel with dual-phase lamellar structure

Haijun Pan, Xinyu Li, Hongmin Zhang, Lin Liu, Jing Li, Yujie Zhao, Zhijian Wang, Yi Zhang, Zhiqiang Wu, Minghui Cai, Hua Ding

Materials Science and Engineering A

DOI

2022

Low-Temperature Superplastic Deformation of Cold-Rolled Fe–5.6Mn–1.1Al–0.2C Steel

Hongtao Zhang, Minghui Cai, Wanjun Zhu, Shenghui Sun, Haile Yan, Shengjie Yao, Yikun Luan, Shuai Tang, Peter Damian Hodgson

Metallurgical and Materials Transactions A

DOI

2022

Effect of Bending Process on Microstructure, Mechanical Properties and Crack Formation of 5% Ni Steel

Fengyong Niu, Jingshu He, Denghui Liu, Xiurong Zuo, Minghui Cai

Metals

DOI

2022

Elevated Temperature Tensile Behavior of a Nb-Mo Microalloyed Medium Mn Alloy under Quasistatic Loads

Wenlong Wu, Minghui Cai, Zeyu Zhang, Weigong Tian, Haijun Pan

Metals

DOI

2022

Microstructure features and carbon partitioning in low temperature bainitic steels: The effect of magnetic field

Baoqi Dong, Tingping Hou, Kaiming Wu, Bernie Rolfe, Lingxue Kong, Minghui Cai, Peter D. Hodgson

Materials Characterization

DOI

2022

Enhanced strength-ductility synergy via high dislocation density-induced strain hardening in nitrogen interstitial CrMnFeCoNi high-entropy alloy

Huabing Li, Yu Han, Hao Feng, Gang Zhou, Zhouhua Jiang, Minghui Cai, Yizhuang Li, Mingxin Huang

Journal of Material Science and Technology

DOI

2022

Changes in microstructure and mechanical properties during the bending process of NM450 wear-resistant steel

Jingshu He, Fengyong Niu, Xiurong Zuo, Denghui Liu, Minghui Cai

Materials Research Express

DOI

2021

Improvement of the yield strength of Fe-11Mn-xAl-yC medium-Mn lightweight steels by tuning partial recrystallization and intra-granular κ-carbide strengthening

Degang Liu, Hua Ding, Dong Han, Minghui Cai

Materials Science and Engineering A

DOI

2021

Stress-state-dependent deformation and fracture behaviors in a cold-rolled 7Mn steel

Xing Wei, Xianglin Zhang, Minghui Cai, Zhou Peng, Yuanyuan Liu, Changwei Lian, Hanlin Peng, Peter Damian Hodgson

Materials Science and Engineering A

DOI

2021

New Insights to Understand the Influence of Nb/Mo on Hydrogen Embrittlement Resistance of Warm-Rolled Medium-Mn Steels

Haijun Pan, Xinyu Li, Bo Qiao, Yi Zhang, Naiming Miao, Lin Liu, Hua Ding, Minghui Cai

Journal of Materials Engineering and Performance

DOI

2021

A Medium-Mn Steel Stamped Parts Overcoming Lüders Deformation by Increasing Dislocation Density

Haijun Pan, Xinyu Li, Bo Qiao, Naiming Miao, Fei Qi, Yi Zhang, Hua Ding, Minghui Cai

Journal of Materials Engineering and Performance

DOI

2020

Ti-Mo析出强化铁素体钢的热变形行为研究

何群才，苗隽，蔡明晖

《鞍钢技术》

2020

Deformation mechanisms of a novel Mn-based 1 GPa TRIP/TWIP assisted lightweight steel with 63% ductility

Shenghui Sun, Minghui Cai, Hua Ding, Hongshou Huang, Haijun Pan

Materials Science and Engineering A

DOI

2020

The effects of a ferritic or martensitic matrix on the tensile behavior of a nano-precipitation strengthened ultra-low carbon Ti–Mo–Nb steel

Minghui Cai, Liu‐Gu Chen, Kai Fang, Hongshou Huang, Peter D. Hodgson

Materials Science and Engineering A

DOI

2020

Microstructural evolution and tensile properties of Fe–11Mn–10Al-1.2C medium-Mn lightweight steel

Degang Liu, Hua Ding, Dong Han, Minghui Cai, Young‐Kook Lee

Materials Science and Engineering A

DOI

2020

Enhanced strength-ductility of medium Mn steel by quenching, partitioning and tempering

Minghui Cai, Hongshou Huang, Xiurong Zuo, Hua Ding, Nicole Ellen Stanford

Materials Science and Technology

DOI

2020

Strain Hardening Behavior of Laminate Structure With Stable bcc/fcc Bimetal Interfaces

Xuqiang Huang, Zhaoyang Lu, Minghui Cai, Peter Damian Hodgson

Frontiers in Materials

DOI

2020

Hot Deformation Behavior of P550 Steels for Nonmagnetic Drilling Collars

Li-Wei Xu, Huabing Li, Zhouhua Jiang, Minghui Cai, Wei‐Chao Jiao, Hao Feng, Shucai Zhang, Peng‐Chong Lu

steel research international

DOI

2019

厚规格NM500耐磨钢板切割延迟裂纹的产生机理

吴翔，左秀荣，蔡明晖，赵威威

《材料与冶金学报》

DOI

2019

Precipitation behavior and austenite stability of Nb or Nb–Mo micro-alloyed warm-rolled medium-Mn steels

Haijun Pan, Hua Ding, Minghui Cai, Dilay Kibaroglu, Yan Ma, Wenwen Song

Materials Science and Engineering A

DOI

2019

Significance of Partial Substitution of Carbon by Nitrogen on Strengthening and Toughening Mechanisms of High Nitrogen Fe-15Cr-1Mo-C-N Martensitic Stainless Steels

Hao Feng, Huabing Li, Wei‐Chao Jiao, Zhouhua Jiang, Minghui Cai, Hong‐Chun Zhu, Zhi‐Gang Chen

Metallurgical and Materials Transactions A

DOI

2019

Low-temperature superplastic deformation mechanism in Ti–6Al–4V alloy processed by friction stir processing

Wenjing Zhang, Hua Ding, Minghui Cai, Wenjing Yang, Jizhong Li

Materials Science and Engineering A

DOI

2019

Effect of Rolling Temperature on Microstructure and Mechanical Properties of a Nb-Mo Microalloyed Medium Mn Steel

Shan Liu, Wenxia Li, Junhua Su, Yunpeng Wang, Minghui Cai

Materials Research

DOI

2019

Dynamic recrystallization and precipitation behaviors during hot deformation of a κ-carbide-bearing multiphase Fe–11Mn–10Al–0.9C lightweight steel

Degang Liu, Hua Ding, Hu Xiao, Dong Han, Minghui Cai

Materials Science and Engineering A

DOI

2019

Ultrahigh strength-ductile medium-Mn steel auto-parts combining warm stamping and quenching & partitioning

Haijun Pan, Minghui Cai, Hua Ding, Shenghui Sun, Hongshou Huang, Yisheng Zhang

Materials Science and Technology

DOI

2019

Hot Deformation Behavior and Processing Map of a Fe-11Mn-10Al-0.9C Duplex Low-Density Steel Susceptible to κ-Carbides

Degang Liu, Hua Ding, Minghui Cai, Dong Han

Journal of Materials Engineering and Performance

DOI

2019

Mechanical behaviors of a lower-Mn-added Fe–11Mn–10Al–1.25C lightweight steel with distinguished microstructural features

Degang Liu, Hua Ding, Minghui Cai, Dong Han

Materials Letters

DOI

2018

初始组织对一种Nb-Mo微合金化中锰TRIP钢组织演变与力学性能的影响

杨佩儒，杨重远，朱贵星，蔡明晖

《材料与冶金学报》

2018

Fe-11Mn-10Al-0.9C低密度钢的变形抗力模型和热加工图

刘德罡，胡小龙，蔡明晖，丁桦

《材料与冶金学报》

2018

Microstructural evolution and precipitation behavior of the warm-rolled medium Mn steels containing Nb or Nb-Mo during intercritical annealing

Haijun Pan, Hua Ding, Minghui Cai

Materials Science and Engineering A

DOI

2018

Strain-rate dependent hot deformation behavior and mechanism of interphase- precipitated Ti-Mo-xNb steels: Physical modeling and characterization

Peiru Yang, Minghui Cai, Chenhui Wu, Junhua Su, Xiaopeng Guo

Materials Science and Engineering A

DOI

2018

Physically-Based Modeling and Characterization of Hot Flow Behavior in an Interphase-Precipitated Ti-Mo Microalloyed Steel

Chuanfeng Wu, Minghui Cai, Peiru Yang, Junhua Su, Xiaopeng Guo

Metals

DOI

2018

Mechanical properties of an Fe-30Mn-4Si-2Al alloy after rolling at different temperatures ranging from 298 to 1073 K

Fuxing Yin, Hengjian Xia, Jianhang Feng, Minghui Cai, X. Zhang, Gongkai Wang, Takahiro Sawaguchi

Materials Science and Engineering A

DOI

2018

Ultra-grain refinement and enhanced low-temperature superplasticity in a friction stir-processed Ti-6Al-4V alloy

Wenjing Zhang, Hua Ding, Minghui Cai, Wenjing Yang, Jizhong Li

Materials Science and Engineering A

DOI

2018

Microstructure Evolution and Mechanical Behavior of a CMnSiAl TRIP Steel Subjected to Partial Austenitization Along with Quenching and Partitioning Treatment

Hui Kong, Q. Chao, Minghui Cai, Erik J. Pavlina, Bernard Rolfe, Peter Damian Hodgson, Hossein Beladi

Metallurgical and Materials Transactions A

DOI

2018

Warm Rolling and Warm Stamping Performance of the Novel Nb-Mo Microalloyed Medium Mn Steels

Hucheng Pan, Hua Ding, Yifu Jiang, Minghui Cai, Y. S. Zhang

DOI

2018

Developing New Steels for Hot Stamping via Partial Austenization

Bernard Rolfe, Hossein Beladi, H. Kong, Erik J. Pavlina, Minghui Cai

DOI

2017

Enhanced tensile properties of a reversion annealed 6.5Mn-TRIP alloy via tailoring initial microstructure and cold rolling reduction

Minghui Cai, Hongshou Huang, Junhua Su, Hua Ding, Peter Damian Hodgson

Journal of Material Science and Technology

DOI

2017

Control of inter/intra-granular κ -carbides and its influence on overall mechanical properties of a Fe-11Mn-10Al-1.25C low density steel

Degang Liu, Minghui Cai, Hua Ding, Dong Han

Materials Science and Engineering A

DOI

2017

One-step quenching and partitioning treatment of a commercial low silicon boron steel

Hui Kong, Q. Chao, Minghui Cai, Erik J. Pavlina, Bernard Rolfe, Peter Hodgson, Hossein Beladi

Materials Science and Engineering A

DOI

2017

Microstructure evolution and enhanced performance of a novel Nb-Mo microalloyed medium Mn alloy fabricated by low-temperature rolling and warm stamping

Hucheng Pan, Minghui Cai, Hua Ding, Haitao Huang, Baozhong Zhu, Y.L. Wang, Y.S. Zhang

Materials & Design

DOI

2017

Strengthening Mechanisms in Low Density Fe–26Mn–xAl–1C Steels

Hua Ding, Huaying Li, R.D.K. Misra, Zhiqiang Wu, Minghui Cai

steel research international

DOI

2017

Hot Deformation Behavior and Microstructural Evolution of High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N

Hao Feng, Zhouhua Jiang, Huabing Li, Wei‐Chao Jiao, X. W. Li, Hong‐Chun Zhu, Shucai Zhang, Bin‐Bin Zhang, Minghui Cai

steel research international

DOI

2017

Microstructure and Tensile Properties of a Nb–Mo Microalloyed 6.5Mn Alloy Processed by Intercritical Annealing and Quenching and Partitioning

Minghui Cai, Hongshou Huang, Haijun Pan, Shenghui Sun, Hua Ding, Peter D. Hodgson

Acta Metallurgica Sinica (English Letters)

DOI

2017

Hot stamped parts with desirable properties in medium Mn TRIP steels

Zijian Wang, Yisheng Zhang, Bin Zhu, Yilin Wang, Hua Ding, Minghui Cai

Procedia Engineering

DOI

2016

Hot Forming of Medium Mn Steels with TRIP Effect

Peter Hodgson, Minghui Cai, Bernard Rolfe

DOI

2016

Combined effects of high-temperature rolling and ultrafast cooling on the mechanical properties of low-carbon steel

S. J. Yao, H.-T. Liu, Ligang Sun, Minghui Cai

Materials and Manufacturing Processes

DOI

2015

块体超细/纳米结构金属材料的累积叠轧制备技术

蔡明晖

《材料与冶金学报》

2015

典型晶格结构FCC/BCC钢的剧烈塑性变形研究现状

马明，蔡明晖，唐正友，丁桦

《材料与冶金学报》

2015

Tensile deformation behavior analysis of low density Fe–18Mn–10Al–xC steels

Hua Ding, Dong Han, Zhang Jun, Zhihui Cai, Zhiqiang Wu, Minghui Cai

Materials Science and Engineering A

DOI

2010

Effect of Baking Process on Microstructures and Mechanical Properties of Low Silicon TRIP Steel Sheet with Niobium

Zhengyou Tang, Hua Ding, Hao Ding, Minghui Cai, Linxiu Du

Journal of Iron and Steel Research International

DOI

2010

Effect of prestrain on microstructures and properties of Si-Al-Mn TRIP steel sheet with niobium

Zhengyou Tang, Hua Ding, Hao Ding, Minghui Cai, Linxiu Du

Journal of Iron and Steel Research International

DOI

2009

铁素体/贝氏体双相钢的变形和断裂特性

蔡明晖，丁桦，张建苏，李龙，唐正友

《材料研究学报》

2009

高延伸凸缘型铁素体/贝氏体钢的组织演变及力学行为

蔡明晖

《东北大学》

2009

硅含量对低碳钢连续冷却中转变组织的影响

秦利国，乔孟平，蔡明晖

《山东冶金》

2009

Transformation behavior of low carbon steels containing two different Si contents

Minghui Cai, Hua Ding, Jian-su Zhang, Long Li, Xiaobin Li, Linxiu Du

Journal of Iron and Steel Research International

DOI

2009

Effiect of silicon and prior deformation of austenite on isothermal transformation in low carbon steels

Minghui Cai, Hua Ding, Jiansu ZHANG, Long Li

Acta Metallurgica Sinica (English Letters)

DOI

2008

高扩孔钢变形奥氏体的连续冷却转变

蔡明晖，丁桦，李晓滨，唐正友

《东北大学学报(自然科学版)》

2008

经济型铁素体/贝氏体高扩孔钢的组织与性能

蔡明晖，丁桦，张建苏，唐正友，王卫卫

《钢铁》

2008

含铌Si-Al-Mn TRIP钢的成形性能研究

唐正友，蔡明晖，丁昊，杜林秀，丁桦

《材料与冶金学报》

2008

Continuous cooling transformation of deformed austenite in highly hole-expandable steels

Minghui Cai, Hao Ding, Xiaobin Li, Zhengyou Tang

Figshare

精选作品

期刊论文

ω-mediated twinning induced by fully constrained heterostructure improves the deformability of the non-recrystallized body-centered cubic phase in a Cr-rich CrFeNi alloy

Engineering heterostructures for strength-ductility synergy in an FCC Al0.3CoCrFeNi high-entropy alloy via elevated-temperature rolling

Ag-induced mechanical softening in 304 stainless steel and its deformation mechanisms

Multiple deformation mechanisms contribute to the exceptional ductility of a high-Cr FeCrNi multi-principal element alloy

Enhancing ductility in Al0.3CoCrFeNi high-entropy alloy through strain-controlled grain boundary engineering

The effect of the interaction between recrystallization and precipitation on the heterogeneous microstructure and tensile properties in a heavily cold–rolled Al0.3CoCrFeNi high–entropy alloy

Anomaly in the elastic modulus of metastable β Ti-10V-2Fe-3Al alloy with α+β dual-phase

Unraveling temperature-dependent superplastic deformation and microstructure evolution in warm-rolled Fe-10Mn-4Al-1.5Si-0.3C medium Mn steel

Effects of texture and mechanical anisotropy on the superplastic behavior in warm-rolled Fe–10Mn–4Al–1.5Si–0.3C medium Mn steel

The Effect of Ti and Mo Microalloying on Hydrogen Embrittlement Resistance of Ultra-High Strength Medium Mn Steel

Achieving Superior Superplasticity of ~ 1200 pct in Medium Mn Lightweight Steel Containing Coarse δ-Ferrite via Dynamic γ → α Transformation

Unraveling the deformation-induced ferrite transformation mechanism and elemental partitioning behavior during hot deformation of medium Mn steel: A case study on Fe–6Mn–1Al–0.2C steel

Exploring hot deformation mechanism and precipitation behavior of Fe–5.6Mn–0.18C–1.1Al(–0.1Ti–0.22Mo) steels through physical modeling and microstructure characterization

激光定向能量沉积15-5PH不锈钢微观组织和性能

超快冷工艺对DP780热轧带钢组织性能的影响

轧制温度对SPHC热轧带钢氧化铁皮的影响

Study on the influence of κ-carbide on the high temperature flow behavior of the medium-Mn lightweight steel: modeling and characterization

Enhancing cryogenic mechanical properties of a cost-effective FeCrNi dual-phase multi-principal element alloy by fully constrained heterostructure and deformation twinning

Ti-Mo microalloyed medium Mn steels: Precipitation and strengthening mechanism

Enhancing mechanical properties of high Cr dual-phase FeCrNi medium-entropy alloy through mutual phase transformation and grain refinement

Superplastic deformation behavior of low Al–added medium Mn steels with and without Ti and Mo elements

控轧控冷对Ti-Mo-Nb复合微合金化低碳钢组织和力学性能的影响

奥氏体基Fe-Mn-Al-C轻质钢的研究进展

合金元素含量对汽车大梁用610L钢组织与性能的影响

钢铁材料超塑性研究现状与发展

Impact of W alloying on microstructure, mechanical property and corrosion resistance of face-centered cubic high entropy alloys: A review

High Ductile Medium Mn Lightweight Alloy: The Role of Intensive Quenching and Deep Cryogenic Treatment

Effect of grain interior and grain boundary κ-carbides on the strain hardening behavior of medium-Mn lightweight steels

Study on the growth mechanism of the internal oxide layer in 9% Ni cryogenic steel

Improved Mn–segregation bands and its influence on deformation behavior in a severely warm–rolled 10Mn lightweight steel

The effect of Ti-Mo additions on microstructural evolution and superplastic deformation behavior of cold–rolled medium Mn steels

Achieving ultra-high elongation of 1401% in a warm-rolled medium Mn lightweight steel with dual-phase lamellar structure

Low-Temperature Superplastic Deformation of Cold-Rolled Fe–5.6Mn–1.1Al–0.2C Steel

Effect of Bending Process on Microstructure, Mechanical Properties and Crack Formation of 5% Ni Steel

Elevated Temperature Tensile Behavior of a Nb-Mo Microalloyed Medium Mn Alloy under Quasistatic Loads

Microstructure features and carbon partitioning in low temperature bainitic steels: The effect of magnetic field

Enhanced strength-ductility synergy via high dislocation density-induced strain hardening in nitrogen interstitial CrMnFeCoNi high-entropy alloy

Changes in microstructure and mechanical properties during the bending process of NM450 wear-resistant steel

Improvement of the yield strength of Fe-11Mn-xAl-yC medium-Mn lightweight steels by tuning partial recrystallization and intra-granular κ-carbide strengthening

Stress-state-dependent deformation and fracture behaviors in a cold-rolled 7Mn steel

New Insights to Understand the Influence of Nb/Mo on Hydrogen Embrittlement Resistance of Warm-Rolled Medium-Mn Steels

A Medium-Mn Steel Stamped Parts Overcoming Lüders Deformation by Increasing Dislocation Density

Ti-Mo析出强化铁素体钢的热变形行为研究

Deformation mechanisms of a novel Mn-based 1 GPa TRIP/TWIP assisted lightweight steel with 63% ductility

The effects of a ferritic or martensitic matrix on the tensile behavior of a nano-precipitation strengthened ultra-low carbon Ti–Mo–Nb steel

Microstructural evolution and tensile properties of Fe–11Mn–10Al-1.2C medium-Mn lightweight steel

Enhanced strength-ductility of medium Mn steel by quenching, partitioning and tempering

Strain Hardening Behavior of Laminate Structure With Stable bcc/fcc Bimetal Interfaces

Hot Deformation Behavior of P550 Steels for Nonmagnetic Drilling Collars

厚规格NM500耐磨钢板切割延迟裂纹的产生机理

Precipitation behavior and austenite stability of Nb or Nb–Mo micro-alloyed warm-rolled medium-Mn steels

Significance of Partial Substitution of Carbon by Nitrogen on Strengthening and Toughening Mechanisms of High Nitrogen Fe-15Cr-1Mo-C-N Martensitic Stainless Steels

Low-temperature superplastic deformation mechanism in Ti–6Al–4V alloy processed by friction stir processing

Effect of Rolling Temperature on Microstructure and Mechanical Properties of a Nb-Mo Microalloyed Medium Mn Steel

Dynamic recrystallization and precipitation behaviors during hot deformation of a κ-carbide-bearing multiphase Fe–11Mn–10Al–0.9C lightweight steel

Ultrahigh strength-ductile medium-Mn steel auto-parts combining warm stamping and quenching & partitioning

Hot Deformation Behavior and Processing Map of a Fe-11Mn-10Al-0.9C Duplex Low-Density Steel Susceptible to κ-Carbides

Mechanical behaviors of a lower-Mn-added Fe–11Mn–10Al–1.25C lightweight steel with distinguished microstructural features

初始组织对一种Nb-Mo微合金化中锰TRIP钢组织演变与力学性能的影响

Fe-11Mn-10Al-0.9C低密度钢的变形抗力模型和热加工图

Microstructural evolution and precipitation behavior of the warm-rolled medium Mn steels containing Nb or Nb-Mo during intercritical annealing

Strain-rate dependent hot deformation behavior and mechanism of interphase- precipitated Ti-Mo-xNb steels: Physical modeling and characterization

Physically-Based Modeling and Characterization of Hot Flow Behavior in an Interphase-Precipitated Ti-Mo Microalloyed Steel

Mechanical properties of an Fe-30Mn-4Si-2Al alloy after rolling at different temperatures ranging from 298 to 1073 K

Ultra-grain refinement and enhanced low-temperature superplasticity in a friction stir-processed Ti-6Al-4V alloy

Microstructure Evolution and Mechanical Behavior of a CMnSiAl TRIP Steel Subjected to Partial Austenitization Along with Quenching and Partitioning Treatment

Warm Rolling and Warm Stamping Performance of the Novel Nb-Mo Microalloyed Medium Mn Steels

Developing New Steels for Hot Stamping via Partial Austenization

Enhanced tensile properties of a reversion annealed 6.5Mn-TRIP alloy via tailoring initial microstructure and cold rolling reduction

Control of inter/intra-granular κ -carbides and its influence on overall mechanical properties of a Fe-11Mn-10Al-1.25C low density steel

One-step quenching and partitioning treatment of a commercial low silicon boron steel

Microstructure evolution and enhanced performance of a novel Nb-Mo microalloyed medium Mn alloy fabricated by low-temperature rolling and warm stamping

Strengthening Mechanisms in Low Density Fe–26Mn–xAl–1C Steels

Hot Deformation Behavior and Microstructural Evolution of High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N

Microstructure and Tensile Properties of a Nb–Mo Microalloyed 6.5Mn Alloy Processed by Intercritical Annealing and Quenching and Partitioning

Hot stamped parts with desirable properties in medium Mn TRIP steels

Hot Forming of Medium Mn Steels with TRIP Effect

Combined effects of high-temperature rolling and ultrafast cooling on the mechanical properties of low-carbon steel