何涛｜上海工程技术大学｜学者主页

2026

阀配流双排轴向柱塞泵动态特性优化

何涛，杜子洋，王传礼，彭嘉豪，韩源龙

《机械设计与研究》

2026

混合织构表面对马氏体不锈钢摩擦学性能的影响

何涛，钱亚东，邓海顺，罗刚，王传礼，韩源龙

《摩擦学学报(中英文)》

2026

TENSILE DEFORMATION BEHAVIOR AND CONSTITUTIVE MODELING OF SOLID-SOLUTION-TREATED 6061 ALUMINUM ALLOY

S. Deng, Tao He, Xiang-Yang Du, Jiayu Zhu

Materiali in Tehnologije

DOI

2026

Influence of nitrogen pressure on microstructure, mechanical, and tribocorrosion properties of (Zr,Cr,Al)N coatings on aluminum alloy

Yang Ding, Tao He, Xiang-Yang Du, Alexey Vereschaka, Catherine Sotova, Jian Li, Yuqi Wang, Peiyu He

Tribology International

DOI

2026

Obnašanje raztopno žarjene aluminijeve zlitine tipa 6061 pod natezno obremenitvijo in postavitev konstitutivnega modela

Shunjie Deng, Tao He, Du Xiangyang, Jiayun Zhu

DiRROS repository (University of Maribor)

2025

Enhanced mechanical properties in 7075 Al alloy fasteners processed by post ECAP-CU aging

Jun-jie Zhang, Tao He, Xiang-Yang Du, V. Alexey, Miao Song, Xilin Chen

Materials Today Communications

DOI

2025

OPTIMIZATION AND INFLUENCE OF PROCESS PARAMETERS ON ECAD SECTION SHRINKAGE OF 7075 Al ALLOY

Jiayun Zhu, Tao He, Xilin Chen, Xiang-Yang Du, Alexey Vereschaka, Jian Li, S. Deng

Materiali in Tehnologije

DOI

2025

Aging-Induced Microstructural Transformations and Performance Enhancement of Cr/DLC Coatings on ECAP-7075 Aluminum Alloy

Yuqi Wang, Tao He, Xiang-Yang Du, A. Okulov, Alexey Vereschaka, Jian Li, Yang Ding, Kang Chen, Peiyu He

Coatings

DOI

2025

Effect of pre-heat treatment and subsequent ECAP-CU on microstructure and corrosion behavior of 7075 Al alloy fasteners

Jun-jie Zhang, Tao He, Xiang-Yang Du, Vereschaka Alexer, Miao Song, Xilin Chen, Jian Li

Journal of Central South University

DOI

2025

Shielding Gas Effect on Dendrite-Reinforced Composite Bronze Coatings via WAAM Cladding: Minimizing Defects and Intergranular Bronze Penetration into 09G2S Steel

A. Okulov, Yulia Khlebnikova, O. Iusupova, L. Egorova, Teona Suaridze, Yury Korobov, Boris Potekhin, M. Sholokhov, Tushar Sonar, Majid Naseri, Tao He, Zai-Ji Li

Technologies

DOI

2025

Effect of Buffer Layer Type on the Mechanical Properties and Corrosion Resistance of Magnetron Sputtered Cr Coatings on 7050 Al Alloy

Yang Ding, Tao He, Xiang-Yang Du, Alexey Vereschaka, Catherine Sotova, Kang Chen, Jian Li, Yuqi Wang, Peiyu He

Coatings

DOI

2025

Enhancing the corrosion resistance of high-strength Al-Zn-Mg-Cu alloys after equal channel angular pressing by developing retrogression and re-aging strategies

Jian Li, Tao He, Xiang-Yang Du, Alexey Vereschaka

Corrosion Science

DOI

2025

Influence of Aluminum Alloy Substrate Temperature on Microstructure and Corrosion Resistance of Cr/Ti Bilayer Coatings

Yuqi Wang, Tao He, Xiang-Yang Du, Alexey Vereschaka, Catherine Sotova, Yang Ding, Kang Chen, Jian Li, Peiyu He

Coatings

DOI

2025

The Effect of Cr Cathode Arc Current on the Wear Resistance of Cr/(Zr,Cr)N/(Zr,Cr,Al)N Coatings on 7050 Aluminum Alloy

Peiyu He, Tao He, Xiang-Yang Du, Alexey Vereschaka, Catherine Sotova, Jian Li, Yang Ding, Kang Chen, Yuqi Wang

Coatings

DOI

2025

Corrosion Resistance of Ti Coatings, Cr Coatings, and Ti/Cr Multilayer Coatings Prepared on 7050 Aluminum Alloy by Magnetron Sputtering

Kang Chen, Tao He, Xiang-Yang Du, A. Okulov, Catherine Sotova, Yang Ding, Yuqi Wang, Peiyu He

Coatings

DOI

2025

Corrosion Resistance of Ti/Cr Gradient Modulation Period Nanomultilayer Coatings Prepared by Magnetron Sputtering on 7050 Aluminum Alloy

Kang Chen, Tao He, Xiang-Yang Du, Alexey Vereschaka, Catherine Sotova, Yang Ding, Jian Li

Inorganics

DOI

2024

Regulating hardness homogeneity and corrosion resistance of Al-Zn-mg-cu alloy via ECAP combined with inter-pass aging

Jian Li, Tao He, Xiang-Yang Du, A. Vereshchaka, Jun-jie Zhang

Materials Characterization

DOI

2024

Microstructural Evolution and Kinetics of 7075 Al Alloy During Homogenization Treatment

Yang Ding, Tao He, Jun-jie Zhang, Xiang-Yang Du, Alexey Vereschaka

JOM

DOI

2024

Optimization of the Hot Working Parameters and Constitutive Analysis of NiAlCrFeMo High-Entropy Alloy during Hot Forming

Wenhan Yu, Yuanming Huo, Zhijun Wang, Tao He, Zhenrong Yan, Hongchao Ji, Hao Chen

Journal of Materials Engineering and Performance

DOI

2024

Microstructure evolution and mechanical properties of NiAlCrFeMo high entropy superalloy after different annealing treatment

Wenhan Yu, Yuanming Huo, Zhijun Wang, Zhenrong Yan, Tao He, Seyed Reza Elmi Hosseini, Hongchao Ji, Hao Chen

Intermetallics

DOI

2024

Effect of Pre-Equal Channel Angular Pressing Homogenization on Microstructure and Mechanical Properties of As-Cast 7050 Al Alloy

Junjie Zhang, Tao He, Xiangyang Du, Yuanming Huo, Dongsheng Jia, Xilin Chen

Journal of Materials Engineering and Performance

DOI

2024

Establishing a unified viscoplastic constitutive equation for EA4T steel: Comparative analysis with Arrhenius model

Hao Chen, Yuanming Huo, Tao He, Zhenrong Yan, Zhiwei Li, Hongchao Ji, Seyed Reza Elmi Hosseini, Zhaozhao Wang, Zhiyuang Bian, Wenhan Yu, Zixin Zhou

International Journal of Non-Linear Mechanics

DOI

2024

Crystal plasticity finite element method investigation of normal tensile deformation anisotropy in rolled pure titanium sheet

Gang Chen, Yuanming Huo, Jianguo Lin, Tao He, Zhiwei Li, Zhenrong Yan, Hongchao Ji, Hamidreza Ezatpour, Donghai Lin

Thin-Walled Structures

DOI

2023

Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy

Dong-sheng Jia, Tao He, Miao Song, Yuan-ming Huo, Hua-yan Hu

Journal of Materials Research and Technology

DOI

2023

Microstructure evolution of 7050 Al alloy fasteners during cold upsetting after equal channel angular pressing

Dong-sheng Jia, Tao He, Miao Song, Yuan-ming Huo, Xiang-Yang Du, A. Vereshchaka, Jian Li, Hua-yan Hu

Journal of Central South University

DOI

2023

Influence of niobium and hafnium doping on the wear and corrosion resistance of coatings based on ZrN

Tao He, Zhylinski Valery, Alexey Vereschaka, Anthon Keshin, Yuan-ming Huo, F. Milovich, Catherine Sotova, A. Seleznev

Journal of Materials Research and Technology

DOI

2023

A multi-scale modelling by coupling cellular automata with finite element method and its application on cross-wedge rolling

Xu Ren, Yuanming Huo, Seyed Reza Elmi Hosseini, Tao He, Zhenrong Yan, Fábio A. O. Fernandes, António B. Pereira, Hongchao Ji, Jie Bai, Zhi-Yuan Bian, Xiangyang Du

Materials Today Communications

DOI

2023

A High-Temperature Strain-Compensated Arrhenius-Type Constitutive Model and an Improved Avrami-Type Dynamic Recrystallization Model of 40CrNiMo

Huo Yuan-ming, Huo Cun-long, Tao He, Seyed Reza Elmi Hosseini, Gang Chen, Jia Chang-yuan, Keran Liu, Baoyu Wang, Du Xiang-yang

Journal of Materials Engineering and Performance

DOI

2023

Numerical Prediction and Experimental Investigation of Ductile Damage During Cold Upsetting of TC16 Titanium Alloy for Manufacturing Fasteners

Yuanming Huo, Wenhan Yu, Tao He, Seyed Reza Elmi Hosseini, Hongchao Ji, Jie Bai, Hao Chen, Zixin Zhou

Transactions of the Indian Institute of Metals

DOI

2023

Numerical prediction of microstructure evolution of high-speed railway axle formed using hot cross wedge rolling

Yuanming Huo, Cunlong Huo, Xu Ren, Tao He, Seyed Reza Elmi Hosseini, Baoyu Wang, Yongliang Cui, Changyuan Jia, Keran Liu, Xiangyang Du

Materials Today Communications

DOI

2023

Modelling of Mechanical Response and Microstructure Evolution of EA4T Steel during Hot Compression Using the Improved Crystal Plasticity Finite Element Method

Jie Bai, Yuanming Huo, Tao He, Zhi-Yuan Bian, Xu Ren, Xiangyang Du

Journal of Materials Engineering and Performance

DOI

2023

Comparison of the Mechanical Properties and Corrosion Resistance of the Cr-CrN, Ti-TiN, Zr-ZrN, and Mo-MoN Coatings

Tao He, Valery Zhylinski, Alexey Vereschaka, Vadzim Chayeuski, Huo Yuanming, Filipp O. Milovich, Catherine S. Sotova, Anton Evgenievich Seleznev, Салычиц Ольга Игоревна

Coatings

DOI

2023

Constitutive Model and Cellular Automaton Simulation of the Dynamic Recrystallization of Railway EA4T‐Grade Steel

Xu Ren, Yuanming Huo, Tao He, Seyed Reza Elmi Hosseini, Zhi-Yuan Bian, Jie Bai, Xiangyang Du

steel research international

DOI

2022

Numerical prediction of ductile damage evolution of 40CrNiMo railway axle steel during hot cross wedge rolling

Changyuan Jia, Yuanming Huo, Tao He, Seyed Reza Elmi Hosseini, Wangqing Wu, Cunlong Huo, Baoyu Wang

Materials Today Communications

DOI

2022

A Novel Unified Visco-Plastic Damage Constitutive Model Considering Stress State of TC16 Titanium Alloy during Cold Deformation

Yuanming Huo, Wanbo Yang, Tao He, Jie Bai, Jianye Gao, Cunlong Huo

Journal of Materials Engineering and Performance

DOI

2022

HOT-COMPRESSION DEFORMATION BEHAVIOR AND CONSTITUTIVE EQUATIONS OF LZ50 AXLE STEEL

Dongsheng Jia, Tao He, Yuanming Huo, Xiangyang Du, Baoyu Wang, Shiqian Li, Hanlin Li

Materiali in tehnologije

DOI

2022

Comparison of Five Different Models Predicting the Hot Deformation Behavior of EA4T Steel

Jie Bai, Yuanming Huo, Tao He, Zhi-Yuan Bian, Xu Ren, Xiangyang Du

Journal of Materials Engineering and Performance

DOI

2022

A Review: Double Multivariate Nonlinear Regression Constitutive Model of High-Speed Train Axle Steel 40CrNiMo during Hot Tension

Changyuan Jia, Yuanming Huo, Tao He, Cunlong Huo, Keran Liu, Baoyu Wang, Xiangyang Du

JOM

DOI

2021

AA6063铝合金韧性断裂断口分析

李汉林，何涛，霍元明，高建烨，李诗谦，贾东昇

《上海工程技术大学学报》

2021

HIGH-TEMPERATURE DEFORMATION BEHAVIOR AND HOT-PROCESSING MAP OF 25CrMo4 AXLE STEEL BASED ON FRICTION CORRECTION

Keran Liu, Yuanming Huo, Tao He, Cunlong Huo, Changyuan Jia, Xiangyang Duo, Baoyu Wang

Materiali in tehnologije

DOI

2021

MECHANICAL BEHAVIOR AND MICROSTRUCTURE EVOLUTION OF THE Ti-3Al-5Mo-4.5V ALLOY AT AN ELEVATED DEFORMATION TEMPERATURE

Menglan Shen, Yuanming Huo, Tao He, Yong Jun Xue, Yujia Hu, Wanbo Yang

Materiali in tehnologije

DOI

2021

Comparison of Modified Mohr–Coulomb Model and Bai–Wierzbicki Model for Constructing 3D Ductile Fracture Envelope of AA6063

Jianye Gao, Tao He, Yuanming Huo, Miao Song, Tingting Yao, Wanbo Yang

Chinese Journal of Mechanical Engineering

DOI

2020

基于LabVIEW的往复式摩擦试验机研制

何涛，李金苗，李成，郝飞，王传礼

《机械设计与研究》

DOI

2020

304不锈钢/TiNi纤维对增强ZL105A复合材料组织和性能的影响

孙安娜，何涛，霍元明，东星倩，王京

《现代制造工程》

DOI

2020

底漏式真空吸铸压力控制系统研究

东星倩，何涛，霍元明，孙安娜，王京

《现代制造工程》

DOI

2020

摆线柔性铰链的设计计算与性能分析

李成，何涛，陈明亮，陈国瑜，王传礼

《机械设计与研究》

DOI

2020

挤压道次对2024铝合金ECAP变形的影响

洪浩洋，杜向阳，何涛，东星倩，高建烨

《轻工学报》

2020

SiC纳米颗粒表面处理方式对增强铝基复合材料组织和性能的影响

姚婷婷，何涛，王京，霍元明，高建烨

《现代制造工程》

DOI

2020

Forming analysis of steel ball bearings made with warm skew rolling

Yuanming Huo, Tao He, B. Wang, Zhenhua Zheng, W. Yang, Youmin Hu, Meng Shen

Materiali in tehnologije

DOI

2020

Comparison of two constitutive modelling methods in application of TC16 alloy at the elevated deformation temperature

Menglan Shen, Yuanming Huo, Tao He, Yong Jun Xue, Wanbo Yang, Yujia Hu, Xinxing Jiang

Materials Today Communications

DOI

2020

Predicting the microstructure evolution for the warm skew rolling of bearing steel balls under different process parameters

Y. Huo, Tao He, Y. Hu, Wonchul Yang, Mingxue Shen

Materiali in tehnologije

DOI

2020

Numerical Prediction and Experimental Validation of the Microstructure of Bearing Steel Ball Formation in Warm Skew Rolling

Yuanming Huo, Tao He, Baoyu Wang, Zhenhua Zheng, Yong Jun Xue

Metallurgical and Materials Transactions A

DOI

2020

Mechanical behavior and microstructure evolution of TC4 alloy during high temperature plastic deformation

Yujia Hu, Yuanming Huo, Tao He

Procedia Manufacturing

DOI

2020

Effects of different deformation routes of ECAP on AA6063 mechanical properties and microstructure

Jianye Gao, Tao He, Yuanming Huo, Tingting Yao, Haoyang Hong

Procedia Manufacturing

DOI

2020

Effect of deformation routes on microstructure of AA6063 during equal channel angular pressing

Tingting Yao, Tao He, Yuanming Huo, Jianye Gao, Haoyang Hong

Procedia Manufacturing

DOI

2019

ZL116铝合金真空吸铸的有效应力分布预测与控制

潘婷婷，何涛，霍元明，赖磊捷，余宽平

《轻工机械》

2019

铝合金铸件定向凝固过程的数值模拟

衣晓杰，何涛，霍元明，赖磊捷，徐亚军

《中国冶金》

DOI

2019

短碳纤维增强铝基复合材料拉伸性能数值模拟分析

东星倩，何涛，霍元明，刘洪君，孙安娜，洪浩洋

《锻压技术》

DOI

2019

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidification parameters

X. Yi, Tao He, Yuanming Huo, Shuwen Chen, Yuling Xu, A. Y. Mahamane Sani

Materiali in tehnologije

DOI

2019

Effects of processing parameters on the microstructure and mechanical properties of Al–Si–Cu alloy after vacuum suction casting

Kun Yu, Tao He, Y. Huo, S. Chen, T. Pan, X. Dong

Materiali in tehnologije

DOI

2019

Microstructure evolution and unified constitutive equations for the elevated temperature deformation of SAE 52100 bearing steel

Yuanming Huo, Tao He, Shoushuang Chen, Hongchao Ji, Riming Wu

Journal of Manufacturing Processes

DOI

2018

往复式摩擦磨损试验机运动系统的参数优化及运动学分析

郝飞，何涛，王传礼，周大伟，马丁

《机械设计与研究》

2018

煤矿水压安全阀的气穴特性与结构优化

马丁，何涛，王传礼

《机床与液压》

2018

底漏式真空吸铸铝合金成形缺陷仿真与实验研究

余宽平，何涛，霍元明，赖磊捷，潘婷婷

《轻工机械》

2018

Modeling of Carbide Spheroidization Mechanism of 52100 Bearing Steel Under Warm Forming Conditions

Tao He, Yuanming Huo, Xiaojun Shi, Shoushuang Chen

Metallurgical and Materials Transactions A

DOI

2018

Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy

Tao He, H. J. Liu, X. J. Shi, Yuanming Huo, Min Li, T. T. Pan

Strength of Materials

DOI

2018

Mechanical Behavior and Microstructure Evolution of Bearing Steel 52100 During Warm Compression

Yuanming Huo, Tao He, Shoushuang Chen, Riming Wu

JOM

DOI

2018

Effect of temperatures and pulling rates on microstructure and mechanical properties of 6061 aluminum alloy in directional solidification

Tao He, Min Li, Yuan Ming Huo, Hong Jun Liu, Xiao jie Yi

Mechanika

DOI

2017

A New Damage Evolution Model for Cold Forging of Bearing Steel-Balls

Tao He, Yuanming Huo

Transactions of the Indian Institute of Metals

DOI

2015

超磁致伸缩驱动器磁场性能分析与优化

喻曹丰，王传礼，邓海顺，何涛，魏本柱

《现代制造工程》

2014

数控高速磨床床身的有限元分析与优化

何涛，朱健毅，彭克立，周栋

《机械工程师》

2012

三维并联振动铸造机的设计与运动性能分析

王成军，何涛，陈蕾，陈加胜

《机械设计与研究》

2010

The Profile Curve of Die of Eccentric Shafts with Cross Wedge Rolling

Tao He, Bao Yu Wang, Zheng Huan Hu

Advanced materials research

DOI

2010

The Equation of Instantaneous Speed Ratio between Roller and Workpiece

Tao He, Bao Yu Wang, Zheng Huan Hu

Advanced materials research

DOI

2005

基于LabVIEW编程的光纤应变测试系统

何涛，吴忠

《上海工程技术大学学报》

Modulation of metal ion deposition behavior and evolution of wear and corrosion failure mechanisms in (Zr,Cr,Al)N nanolayered composite coatings via substrate bias voltage

Yuqi Wang, Tao He, Xiang-Yang Du, Alexey Vereschaka, A. Okulov, Catherine Sotova, Yang Ding

Applications of Surface Science

DOI

精选作品

期刊论文

阀配流双排轴向柱塞泵动态特性优化

混合织构表面对马氏体不锈钢摩擦学性能的影响

TENSILE DEFORMATION BEHAVIOR AND CONSTITUTIVE MODELING OF SOLID-SOLUTION-TREATED 6061 ALUMINUM ALLOY

Influence of nitrogen pressure on microstructure, mechanical, and tribocorrosion properties of (Zr,Cr,Al)N coatings on aluminum alloy

Obnašanje raztopno žarjene aluminijeve zlitine tipa 6061 pod natezno obremenitvijo in postavitev konstitutivnega modela

Enhanced mechanical properties in 7075 Al alloy fasteners processed by post ECAP-CU aging

OPTIMIZATION AND INFLUENCE OF PROCESS PARAMETERS ON ECAD SECTION SHRINKAGE OF 7075 Al ALLOY

Aging-Induced Microstructural Transformations and Performance Enhancement of Cr/DLC Coatings on ECAP-7075 Aluminum Alloy

Effect of pre-heat treatment and subsequent ECAP-CU on microstructure and corrosion behavior of 7075 Al alloy fasteners

Shielding Gas Effect on Dendrite-Reinforced Composite Bronze Coatings via WAAM Cladding: Minimizing Defects and Intergranular Bronze Penetration into 09G2S Steel

Effect of Buffer Layer Type on the Mechanical Properties and Corrosion Resistance of Magnetron Sputtered Cr Coatings on 7050 Al Alloy

Enhancing the corrosion resistance of high-strength Al-Zn-Mg-Cu alloys after equal channel angular pressing by developing retrogression and re-aging strategies

Influence of Aluminum Alloy Substrate Temperature on Microstructure and Corrosion Resistance of Cr/Ti Bilayer Coatings

The Effect of Cr Cathode Arc Current on the Wear Resistance of Cr/(Zr,Cr)N/(Zr,Cr,Al)N Coatings on 7050 Aluminum Alloy

Corrosion Resistance of Ti Coatings, Cr Coatings, and Ti/Cr Multilayer Coatings Prepared on 7050 Aluminum Alloy by Magnetron Sputtering

Corrosion Resistance of Ti/Cr Gradient Modulation Period Nanomultilayer Coatings Prepared by Magnetron Sputtering on 7050 Aluminum Alloy

Regulating hardness homogeneity and corrosion resistance of Al-Zn-mg-cu alloy via ECAP combined with inter-pass aging

Microstructural Evolution and Kinetics of 7075 Al Alloy During Homogenization Treatment

Optimization of the Hot Working Parameters and Constitutive Analysis of NiAlCrFeMo High-Entropy Alloy during Hot Forming

Microstructure evolution and mechanical properties of NiAlCrFeMo high entropy superalloy after different annealing treatment

Effect of Pre-Equal Channel Angular Pressing Homogenization on Microstructure and Mechanical Properties of As-Cast 7050 Al Alloy

Establishing a unified viscoplastic constitutive equation for EA4T steel: Comparative analysis with Arrhenius model

Crystal plasticity finite element method investigation of normal tensile deformation anisotropy in rolled pure titanium sheet

Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy

Microstructure evolution of 7050 Al alloy fasteners during cold upsetting after equal channel angular pressing

Influence of niobium and hafnium doping on the wear and corrosion resistance of coatings based on ZrN

A multi-scale modelling by coupling cellular automata with finite element method and its application on cross-wedge rolling

A High-Temperature Strain-Compensated Arrhenius-Type Constitutive Model and an Improved Avrami-Type Dynamic Recrystallization Model of 40CrNiMo

Numerical Prediction and Experimental Investigation of Ductile Damage During Cold Upsetting of TC16 Titanium Alloy for Manufacturing Fasteners

Numerical prediction of microstructure evolution of high-speed railway axle formed using hot cross wedge rolling

Modelling of Mechanical Response and Microstructure Evolution of EA4T Steel during Hot Compression Using the Improved Crystal Plasticity Finite Element Method

Comparison of the Mechanical Properties and Corrosion Resistance of the Cr-CrN, Ti-TiN, Zr-ZrN, and Mo-MoN Coatings

Constitutive Model and Cellular Automaton Simulation of the Dynamic Recrystallization of Railway EA4T‐Grade Steel

Numerical prediction of ductile damage evolution of 40CrNiMo railway axle steel during hot cross wedge rolling

A Novel Unified Visco-Plastic Damage Constitutive Model Considering Stress State of TC16 Titanium Alloy during Cold Deformation

HOT-COMPRESSION DEFORMATION BEHAVIOR AND CONSTITUTIVE EQUATIONS OF LZ50 AXLE STEEL

Comparison of Five Different Models Predicting the Hot Deformation Behavior of EA4T Steel

A Review: Double Multivariate Nonlinear Regression Constitutive Model of High-Speed Train Axle Steel 40CrNiMo during Hot Tension

AA6063铝合金韧性断裂断口分析

HIGH-TEMPERATURE DEFORMATION BEHAVIOR AND HOT-PROCESSING MAP OF 25CrMo4 AXLE STEEL BASED ON FRICTION CORRECTION

MECHANICAL BEHAVIOR AND MICROSTRUCTURE EVOLUTION OF THE Ti-3Al-5Mo-4.5V ALLOY AT AN ELEVATED DEFORMATION TEMPERATURE

Comparison of Modified Mohr–Coulomb Model and Bai–Wierzbicki Model for Constructing 3D Ductile Fracture Envelope of AA6063

基于LabVIEW的往复式摩擦试验机研制

304不锈钢/TiNi纤维对增强ZL105A复合材料组织和性能的影响

底漏式真空吸铸压力控制系统研究

摆线柔性铰链的设计计算与性能分析

挤压道次对2024铝合金ECAP变形的影响

SiC纳米颗粒表面处理方式对增强铝基复合材料组织和性能的影响

Forming analysis of steel ball bearings made with warm skew rolling

Comparison of two constitutive modelling methods in application of TC16 alloy at the elevated deformation temperature

Predicting the microstructure evolution for the warm skew rolling of bearing steel balls under different process parameters

Numerical Prediction and Experimental Validation of the Microstructure of Bearing Steel Ball Formation in Warm Skew Rolling

Mechanical behavior and microstructure evolution of TC4 alloy during high temperature plastic deformation

Effects of different deformation routes of ECAP on AA6063 mechanical properties and microstructure

Effect of deformation routes on microstructure of AA6063 during equal channel angular pressing

ZL116铝合金真空吸铸的有效应力分布预测与控制

铝合金铸件定向凝固过程的数值模拟

短碳纤维增强铝基复合材料拉伸性能数值模拟分析

Microstructure evolution and property changes of Al-Si-Cu alloy by controlling directional solidification parameters

Effects of processing parameters on the microstructure and mechanical properties of Al–Si–Cu alloy after vacuum suction casting

Microstructure evolution and unified constitutive equations for the elevated temperature deformation of SAE 52100 bearing steel

往复式摩擦磨损试验机运动系统的参数优化及运动学分析

煤矿水压安全阀的气穴特性与结构优化

底漏式真空吸铸铝合金成形缺陷仿真与实验研究

Modeling of Carbide Spheroidization Mechanism of 52100 Bearing Steel Under Warm Forming Conditions

Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy

Mechanical Behavior and Microstructure Evolution of Bearing Steel 52100 During Warm Compression

Effect of temperatures and pulling rates on microstructure and mechanical properties of 6061 aluminum alloy in directional solidification

A New Damage Evolution Model for Cold Forging of Bearing Steel-Balls

超磁致伸缩驱动器磁场性能分析与优化

数控高速磨床床身的有限元分析与优化

三维并联振动铸造机的设计与运动性能分析

The Profile Curve of Die of Eccentric Shafts with Cross Wedge Rolling

The Equation of Instantaneous Speed Ratio between Roller and Workpiece

基于LabVIEW编程的光纤应变测试系统

Modulation of metal ion deposition behavior and evolution of wear and corrosion failure mechanisms in (Zr,Cr,Al)N nanolayered composite coatings via substrate bias voltage

预印本

Mechanical Properties and Microstructure of an Aa7050 Processed by Equal Channel Angular Pressing Combined with Inter-Pass Aging Treatment