王兵

2026

SiCf/SiC陶瓷基复合材料干切加工内冷却刀杆温度调控性能研究

《硬质合金》

2026

超精密加工表面材料回弹与刀具刃口几何参数对切削力的影响规律

《制造技术与机床》

2026

基于相位补偿的可调阻尼刀具及其颤振抑制研究

《新技术新工艺》

DOI

2026

难加工金属材料切削表面完整性预测与调控

《中国机械工程》

2026

基于热电式传感器的测温方法及其在智能刀具中的应用现状综述

《机械工程学报》

2026

基于涂层与智能感知协同的制造类课程改革——以“金属切削刀具与加工”课程模块为例

《教育教学论坛》

2026

基于时序样本深度聚类的无监督刀具磨损在线监测与应用

《制造技术与机床》

2026

An LPBF-fabricated TPMS-based thermally active toolholder for insert temperature reduction in dry turning

The International Journal of Advanced Manufacturing Technology

DOI

2026

IPEGCN: internal priors-guided external graph convolution network for machining defect segmentation under limited sample and strong interference

Journal of Intelligent Manufacturing

DOI

2026

Effect of rake angle on adhesive wear mechanisms of pcd tools in dry turning of aluminum alloys

The International Journal of Advanced Manufacturing Technology

DOI

2026

Influence of the mechanochemical effect induced by graphene chemical adsorption on dislocation motion during Inconel 718 machining

The International Journal of Advanced Manufacturing Technology

DOI

2026

Hybrid cooling with pulsed-high pressure jet and TPMS thermally active toolholder for turning inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2026

Effects of Buoyancy and Surface Roughness on Mechanical Characterization of Shipbuilding Steel by Immersion Instrumented Indentation

Micromachines

DOI

2025

类V型复合材料薄壁件切边加工减振优化

《航空制造技术》

DOI

2025

硬质合金刀具直角切削316L不锈钢表面黏附与黏附机理的研究

《工具技术》

2025

粉末冶金材料零件刀具优选试验研究

《组合机床与自动化加工技术》

DOI

2025

基于机器视觉的硬质合金刀具表面缺陷与磨损检测

《硬质合金》

2025

High performance machining based on fretting wear mechanism of slot milled surfaces

Tribology International

DOI

2025

Effects of helical flute geometry of twist drill on the drilling performance of C45 steel

The International Journal of Advanced Manufacturing Technology

DOI

2025

Machining parameters inversion and regularity analysis based on surface topography point cloud of GH4169 alloy

Mechanical Systems and Signal Processing

DOI

2025

Ultrasonic vibration-assisted machining in aerospace composite materials: Principle, technology, challenges

Composites Part A Applied Science and Manufacturing

DOI

2025

A novel approach for measuring specific cutting energy based on cutting energy consumption and in-situ DIC technique

Measurement Science and Technology

DOI

2025

Superpixel-based multiple decision-making method for unsupervised defect detection during drilling of CFRCs components

Measurement

DOI

2025

Severe grain deformation and fracture in shear-based material removal test for Ni-based superalloy

Journal of Alloys and Compounds

DOI

2025

Experimental characterization and formation mechanism of micro/nano-scale DRX grains in FGH96 machined surface layer

Materials Today Communications

DOI

2025

Theoretical modelling for accurate prediction of transient rapid temperature rise variation within whole tool tip area

Applied Thermal Engineering

DOI

2025

Modeling and simulation of 3D topographies of slot milled walls and floor surface considering slot bi-sided wall constraints

Journal of Manufacturing Processes

DOI

2025

Atomic insights into nano-cutting behavior of single-crystal CuZn alloy

International Journal of Mechanical Sciences

DOI

2025

Machining quality improvement through ice densification pretreatment during rotary ultrasonic face grinding SiO2f/SiO2 composite

Composites Part A Applied Science and Manufacturing

DOI

2025

In-situ DIC characterization of dislocation density and stored strain energy fields for deformation zones during cutting of Ti6Al4V alloy

Measurement

DOI

2025

Columnar-to-Equiaxed Transition on Laser Powder Bed Fusion Ultra-Precision Additive Manufacturing Accuracy and Surface Roughness for Solidified 316L Micro-Lattice Structure

Metals

DOI

2025

Intelligent identification of material removal behavior during scratching of 4H-SiC based on acoustic emission sensing and unsupervised deep learning

Materials Science in Semiconductor Processing

DOI

2025

Experimental investigation and theoretical validation of failure mechanism caused by tellurium in Inconel 718

Journal of Nuclear Materials

DOI

2025

Model for predicting milled floor surface topography by importing actual bottom tool-edge profile details via online image acquisition

Mechanical Systems and Signal Processing

DOI

2025

A Novel Superpixel Segmentation Method Based on Adaptive Seed Expansion Random Walk Algorithm Toward Complex Scene Images Processing

IEEE Transactions on Instrumentation and Measurement

DOI

2024

采用门控循环单元神经网络和多特征融合的铣削刀具磨损监测

《机械科学与技术》

2024

雾化射流对42CrMo钢车削断屑性能影响的实验研究

《工具技术》

2024

Design and testing of additive manufactured multifold rotationally symmetric lattice structures by laser powder bed fusion

The International Journal of Advanced Manufacturing Technology

DOI

2024

Magnetic property of tellurium-infiltrated Inconel 718: First-principles calculations and experimental validation

Materials Letters

DOI

2024

A new characterization methodology for assessing machinability through cutting energy consumption

CIRP journal of manufacturing science and technology

DOI

2024

A novel correction method to improve the IR measurement accuracy of cutting tool and workpiece temperature

DOI

2024

Debonding Fiber Damage Mechanism Modeling for Machining Damage Inhibition During Rotary Ultrasonic Face Grinding SiO2f/SiO2

Journal of Manufacturing Science and Engineering

DOI

2024

A novel analytical model for predicting ploughing effect on machined wall surface topography considering tool wear during slot milling process

Journal of Manufacturing Processes

DOI

2024

Hole-exit defect formation during traditional and ultrasonic vibration-assisted drilling of C/SiC composites

The International Journal of Advanced Manufacturing Technology

DOI

2024

Pure waterjet drilling thin CFRP laminate with [0/45/–45/90]2s stacking sequence

The International Journal of Advanced Manufacturing Technology

DOI

2024

Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures

Metals

DOI

2024

How does the uncut chip thickness affect the deformation states within the primary shear zone during metal cutting?

International Journal of Machine Tools and Manufacture

DOI

2024

Surface integrity analysis of Si3N4 under cryogenic assisted femtosecond laser ablation

Ceramics International

DOI

2024

Effects of dealloying surface modification on machinability improvement of NiTi alloy during micro-machining process

Tribology International

DOI

2024

Integrating textured tools and diverse lubricooling approaches in machining performance of Ti and Ni-base alloys – a comprehensive review

Machining Science and Technology

DOI

2024

In-situ characterization of thermo-mechanical deformation fields based on DIC during orthogonal cutting of Ti6Al4V

Journal of Manufacturing Processes

DOI

2024

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Diamond and Related Materials

DOI

2024

Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys

Materials

DOI

2024

Investigation of Surface Integrity of Conical Hole in Laser Polishing 440C Stainless Steel

Metals

DOI

2023

微量润滑方式对车削42CrMo钢断屑效果的影响分析

《工具技术》

2023

高压射流对42CrMo钢车削断屑性能的实验研究

《工具技术》

2023

In-situ test of full field deformation and chip formation mechanism during machining of Ti2AlNb intermetallic with digital image correlation method

CIRP journal of manufacturing science and technology

DOI

2023

Polytypic transformation behavior from 4H-SiC to 3C-SiC during high-speed scratching of single crystalline silicon carbide

Materials Letters

DOI

2023

Ultrasonic-Vibration-Assisted Waterjet Drilling of [0/45/−45/90]2s Carbon-Fiber-Reinforced Polymer Laminates

Micromachines

DOI

2023

Numerical simulation and experimental study of femtosecond laser ablation of copper: A two-temperature model with temperature-dependent properties and multiple phase transitions

Optics & Laser Technology

DOI

2023

A novel dealloying assisted machining method to improve the machinability of NiTi alloy as a typical high toughness difficult-to-machine material

Materials & Design

DOI

2023

Analytical model for thermo-mechanical interaction induced residual stress distribution during multi-conditional machining Inconel 718

Mechanical Systems and Signal Processing

DOI

2023

Prediction of Isotropic Rough Surface Directional Spectral Emissivity with Surface-Morphology-Dependent Modelling

Metals

DOI

2023

An overview on state-of-art of micromixer designs, characteristics and applications

Analytica Chimica Acta

DOI

2023

Synthesis of Cu2O Nanoparticles by Ellipse Curve Micromixer

ACS Omega

DOI

2023

Precise patterning of carbon films on polyethylene terephthalate polymer substrates using femtosecond lasers

Applied Surface Science

DOI

2023

Response prediction of cantilever plates via mode superposition method and combination method of beam functions

Mechanical Systems and Signal Processing

DOI

2023

Strain rate effect on material deformation and removal behavior during high speed scratching of 4H‐SiC

Tribology International

DOI

2023

Curing behaviors and mechanical properties of SiC-whisker-reinforced alumina ceramics fabricated with digital light processing

Journal of Materials Research and Technology

DOI

2023

Numerical prediction of surface morphology and roughness in rotary ultrasonic face grinding SiO2f/SiO2 composite

Journal of Materials Research and Technology

DOI

2023

Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

Micromachines

DOI

2023

Numerical analysis of residual stresses induced by cold spray fabricating cBN-reinforced Ni matrix composites

Surface and Coatings Technology

DOI

2023

Progressive mapping surface integrity and multi-objective optimizing surface quality of machining Ti-6Al-4V based novel tool failure criterion

CIRP journal of manufacturing science and technology

DOI

2023

Effect of Coating Thickness on the Bond Strength of Cold-Sprayed Ni-Based cBN Coating on 42CrMo Substrate

Journal of Thermal Spray Technology

DOI

2023

Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process

Journal of Manufacturing Processes

DOI

2023

Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching process for drag reduction

Applied Surface Science

DOI

2023

Gallium-based liquid metal hybridizing MoS 2 nanosheets with reversible rheological characteristics and enhanced lubrication properties

RSC Advances

DOI

2023

Study on the infiltration mechanism of tellurium into the Inconel 718

Journal of Materials Science

DOI

2022

钛合金高质高效切削加工刀具技术

《金属加工(冷加工)》

2022

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Archives of Civil and Mechanical Engineering

DOI

2022

Investigation of mechanism and surface morphology on the femtosecond laser ablation of silicon nitride under different auxiliary processing environments

Ceramics International

DOI

2022

In-situ DIC measurement of material deformation through spatial–temporal kinematics analysis during orthogonal cutting Ti6Al4V

Measurement

DOI

2022

Modelling and prediction of surface topography on machined slot side wall with single-pass end milling

The International Journal of Advanced Manufacturing Technology

DOI

2022

Prediction modelling of cutting force in rotary ultrasonic end grinding 2.5D woven SiO2f/SiO2 ceramic matrix composite

Composite Structures

DOI

2022

Friction behaviors in the metal cutting process: state of the art and future perspectives

International Journal of Extreme Manufacturing

DOI

2022

Microstructure and mechanical properties of NiTi nanoporous structures fabricated with dealloying process

Journal of Alloys and Compounds

DOI

2022

Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effect of Cutting Parameters on Tool Chipping Mechanism and Tool Wear Multi-Patterns in Face Milling Inconel 718

Lubricants

DOI

2022

A rate-dependent damage model to characterize dynamic fracture behavior of Ti6Al4V under high strain rate loading

Engineering Fracture Mechanics

DOI

2022

Effects of Chevron Micro-Textures on Tribological and Lubricating Performance of Cylinder Block/Valve Plate Interface in Axial Piston Pumps

Journal of Tribology

DOI

2022

Improving thermal conductivity of Inconel 718 through thermoelectric coupling to reduce cutting temperature

Journal of Materials Research and Technology

DOI

2022

Enhancement of Inconel 718 resistance to tellurium corrosion through cyclic dynamic microwave thermal shock

Materials Letters

DOI

2022

Effects of sidewall roughness on mixing performance of zigzag microchannels

Chemical Engineering and Processing - Process Intensification

DOI

2022

Optimizing amplitude to improve machined surface quality in longitudinal ultrasonic vibration-assisted side milling 2.5D C/SiC composites

Composite Structures

DOI

2022

Effects of process parameters on periodic impact force exerting on cutting tool in ultrasonic vibration-assisted oblique turning

Advances in Manufacturing

DOI

2022

Enhancement of Te infiltration into Inconel 718 surface layer through dynamic microwave thermal shock

Applied Surface Science

DOI

2022

Formation mechanism of superhydrophobicity of stainless steel by laser-assisted decomposition of stearic acid and its corrosion resistance

Optics & Laser Technology

DOI

2022

Heat transfer enhancement with surface-active thermal conductive media coating during orthogonal cutting Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718

Tribology International

DOI

2022

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Materials

DOI

2022

Numerical prediction and experimental investigation of residual stresses in sequential milling of GH4169 considering initial stress effect

The International Journal of Advanced Manufacturing Technology

DOI

2021

Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources

The International Journal of Advanced Manufacturing Technology

DOI

2021

Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools

Journal of Advanced Research

DOI

2021

Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review

International Journal of Machine Tools and Manufacture

DOI

2021

Surface texture and friction property of Ti-6Al-4V processed by rotary ultrasonic rolling

The International Journal of Advanced Manufacturing Technology

DOI

2021

Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums

Journal of Alloys and Compounds

DOI

2021

Effect of oxygen on Te infiltration into superalloy Inconel 718 at elevated temperature

Surface and Coatings Technology

DOI

2021

Optimisation of Planning Parameters for Machining Blade Electrode Micro-Fillet with Scallop Height Modelling

Micromachines

DOI

2021

A hybrid post-processing method for improving the surface quality of additively manufactured metal parts

CIRP Annals

DOI

2021

Intermetallic compounds Cr3Te4/NiNbTe2 formation during infiltrating Te into Inconel 718

Materials Letters

DOI

2021

Phase transition and dynamic recrystallization mechanisms of white layer formation during turning superalloy Inconel 718

Journal of Materials Research and Technology

DOI

2021

Vortices degradation and periodical variation in spiral micromixers with various spiral structures

International Journal of Heat and Mass Transfer

DOI

2021

Microstructural characteristics, deformation behavior and mechanical properties of Inconel 718 treated by Te infiltration

Journal of Alloys and Compounds

DOI

2021

Theoretical Modeling and Analysis of Directional Spectrum Emissivity and Its Pattern for Random Rough Surfaces with a Matrix Method

Symmetry

DOI

2021

Tool wear induced the gradient distribution of surface integrity with process-microstructure-property characteristics after turning Ti-6Al-4 V

Journal of Manufacturing Processes

DOI

2021

Effects of Sequential Operation with Heat Treatment and Mechanical Milling on Work Hardening for Superalloy GH4169

Metals

DOI

2021

Longitudinal amplitude effect on material removal mechanism of ultrasonic vibration-assisted milling 2.5D C/SiC composites

Ceramics International

DOI

2020

基于响应曲面法的NOMEX蜂窝高速铣削参数优化

《工具技术》

2020

深冷处理对TiAlN涂层刀具微观组织及力学性能的影响

《工具技术》

2020

Effect of element Te on alterations of microstructure and mechanical property of nickel-based superalloy Inconel 718 through alloy infiltration

Applied Surface Science

DOI

2020

Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review

The International Journal of Advanced Manufacturing Technology

DOI

2020

A quantitative analysis of the transition of fracture mechanisms of Ti6Al4V over a wide range of stress triaxiality and strain rate

Engineering Fracture Mechanics

DOI

2020

Analytical Prediction and Experimental Investigation of Burnishing Force in Rotary Ultrasonic Roller Burnishing Titanium Alloy Ti–6Al–4V

Journal of Manufacturing Science and Engineering

DOI

2019

基于加工特征的整体叶盘数控编程与加工参数优化

《组合机床与自动化加工技术》

DOI

2019

Tool wear-induced microstructure evolution in localized deformation layer of machined Ti–6Al–4V

Journal of Materials Science

DOI

2019

The effects of stress triaxiality and strain rate on the fracture strain of Ti6Al4V

Engineering Fracture Mechanics

DOI

2019

An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718

International Journal of Precision Engineering and Manufacturing-Green Technology

DOI

2019

Surface Characterization and Tribological Performance of Anodizing Micro-Textured Aluminum-Silicon Alloys

Materials

DOI

2019

Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pressures and injection positions

Journal of Manufacturing Processes

DOI

2019

Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V

Tribology International

DOI

2019

Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy

The International Journal of Advanced Manufacturing Technology

DOI

2018

State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review

Measurement

DOI

2018

Effect of machining‐induced surface integrity on the corrosion behavior of Al–Li alloy 2A97 in sodium chloride solution

Materials and Corrosion

DOI

2018

Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools

Materials

DOI

2018

Cutting temperature measurement using an improved two-color infrared thermometer in turning Inconel 718 with whisker-reinforced ceramic tools

Ceramics International

DOI

2018

Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review

The International Journal of Advanced Manufacturing Technology

DOI

2018

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

Materials

DOI

2018

Influences of Cutting Speed and Material Mechanical Properties on Chip Deformation and Fracture during High-Speed Cutting of Inconel 718

Materials

DOI

2018

Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V

International Journal of Mechanical Sciences

DOI

2017

Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy

Journal of Manufacturing Processes

DOI

2017

Stress-induced orientation relationship variation for phase transformation of α -Ti to β -Ti during high speed machining Ti-6Al-4V

Materials Science and Engineering A

DOI

2016

材料动态性能对高速切削切屑形成的影响规律

《中国科学:技术科学》

2016

等离子体硼氮共渗预处理对硬质合金刀具表面金刚石涂层结合强度的影响

《稀有金属》

DOI

2016

旋转超声滚压加工中的滚压力与滚压深度及表面形貌研究

《兵工学报》

2016

Development of constrained layer damping toolholder to improve chatter stability in end milling

International Journal of Mechanical Sciences

DOI

2016

Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy

CIRP journal of manufacturing science and technology

DOI

2016

Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy

Journal of Cleaner Production

DOI

2016

Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V

Materials & Design

DOI

2015

Cutting performance of solid ceramic end milling tools in machining hardened AISI H13 steel

International Journal of Refractory Metals and Hard Materials

DOI

2015

Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining

International Journal of Mechanical Sciences

DOI

2015

Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining

The International Journal of Advanced Manufacturing Technology

DOI

2015

Brittle Removal Mechanism of Ductile Materials With Ultrahigh-Speed Machining

Journal of Manufacturing Science and Engineering

DOI

2015

Shear localization sensitivity analysis for Johnson–Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V

Simulation Modelling Practice and Theory

DOI

2015

Fluid-Like Properties of Chip Flow in High-Speed Metal Cutting Process

Machining Science and Technology

DOI

2014

Influences of chip serration on micro-topography of machined surface in high-speed cutting

International Journal of Machine Tools and Manufacture

DOI

2014

Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V

The International Journal of Advanced Manufacturing Technology

DOI

2014

Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining

The International Journal of Advanced Manufacturing Technology

DOI

2013

Effects of Cutting Conditions on the Machinability of Stainless Steel Formed by Laser Cladding

Advanced materials research

DOI

2013

Serrated chip formation mechanism based on mixed mode of ductile fracture and adiabatic shear

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2013

Investigations of yield stress, fracture toughness, and energy distribution in high speed orthogonal cutting

International Journal of Machine Tools and Manufacture

DOI

2012

Chip Formation Characteristics in High-Speed Machining of Hardened AISI1045 Steel

Advanced materials research

DOI

2012

Actually Geometry of Milling Tool Involved in Cutting Process

Materials science forum

DOI

2010

45号钢、30CrMnSi及高温合金磨削实验研究

《东北大学》

2002

CVD金刚石厚膜焊接刀具的试验研究

《工具技术》

1990

圆头磨前滚刀设计

《工具技术》

2025

激光熔覆30CrMnSiA的铣削减材加工工艺优化研究

《2025中国国土经济学会学术年会暨太行论坛城市规划与工程技术管理分论坛》

DOI