百晓学者学者目录

李蓓智

东华大学机械工程学院

个人简介

李蓓智，东华大学机械工程学院教授、博士生导师，工学博士（控制理论与控制工程），机械制造及其自动化学科带头人，享受国务院政府特殊津贴与上海市政府特殊津贴。长期从事先进制造工艺与装备、智能监测与控制、精密与超精密加工、高速与超高速加工、现代集成制造系统等方向研究。

精选作品

期刊论文

  1. 钱磊，李蓓智，吕志军（2022）. 基于分子动力学的滚动轴承超精加工仿真研究. 《组合机床与自动化加工技术》.
  2. 张康锋，李蓓智，王庆霞（2022）. 串行布置的多装配尺寸链组公差分配优化设计. 《制造业自动化》.
  3. 孙启梦，李蓓智，周亚勤，刘晓（2022）. 极大径厚比薄壁件的加工变形仿真与试验研究. 《东华大学学报(自然科学版)》.
  4. Zhida Ren, Beizhi Li, Qingzhi Zhou, Rundong Hou, Yawei Zhang (2022). Correction to: Optimization of high‑speed grinding parameters for anti‑fatigue performance of 20CrMnTi steel. The International Journal of Advanced Manufacturing Technology.DOI
  5. Zhida Ren, Beizhi Li, Qingzhi Zhou, Rundong Hou, Yawei Zhang (2022). Optimization of high-speed grinding parameters for anti-fatigue performance of 20CrMnTi steel. The International Journal of Advanced Manufacturing Technology.DOI
  6. Zhida Ren, Beizhi Li, Qingzhi Zhou (2022). Subsurface residual stress and damaged layer in high-speed grinding considering thermo-mechanical coupling influence. The International Journal of Advanced Manufacturing Technology.DOI
  7. Zhida Ren, Beizhi Li, Qingzhi Zhou (2022). Rolling contact fatigue crack propagation on contact surface and subsurface in mixed mode I+II+III fracture. Wear.DOI
  8. Zhemin Shi, Beizhi Li, Zhihong Sun (2021). Study on microstructure evolution of grinding surface of bcc Fe-Ni maraging steel based on molecular dynamics. Applied Surface Science.DOI
  9. 邹鹏，李蓓智，龚菊贤，杨建国（2020）. 改进的RANSAC点云分割算法及其应用. 《机械设计与制造》.DOI
  10. 伍梓聪，任祉达，李蓓智（2020）. 滚动轴承微裂纹及其对轴承疲劳寿命的影响. 《组合机床与自动化加工技术》.
  11. 秦立功，李蓓智，黄顺舟，杨建国（2020）. 基于NV-SEC的复杂箱体特征尺寸提取方法及应用. 《组合机床与自动化加工技术》.DOI
  12. Wanjiao Dong, Beizhi Li, Weicheng Guo, Qinzhi Zhou (2020). Prediction of different design conditions on comprehensive performance of hydrostatic slide and experimental verification. The International Journal of Advanced Manufacturing Technology.DOI
  13. Zishan Ding, Gaoxiang Sun, Miaoxian Guo, Xiaohui Jiang, Beizhi Li, Steven Y. Liang (2020). Effect of phase transition on micro-grinding-induced residual stress. Journal of Materials Processing Technology.DOI
  14. 田宏飞，李蓓智，龚菊贤，杨建国（2019）. 玻璃纤维增强复合材料铣削工艺实验研究. 《组合机床与自动化加工技术》.DOI
  15. 吴重军，李蓓智（2019）. 碳化硅磨削微观损伤机理及其高性能磨削技术研究. 《机械工程学报》.
  16. 王冠千，李蓓智，黄顺舟，杨建国（2019）. 基于测量数据的发射箱多轴自动编程系统开发. 《现代制造工程》.DOI
  17. 王冠千，李蓓智，黄顺舟，杨建国（2019）. 基于UG的发射箱自动化虚拟装配系统开发. 《制造技术与机床》.DOI
  18. 郭维诚，李蓓智，杨建国，周勤之（2019）. 磨削过程信号监测与砂轮磨损预测模型构建. 《上海交通大学学报》.DOI
  19. 伍丰，李蓓智，杨建国（2019）. 纳米磨削单晶和多晶3J33的分子动力学仿真. 《东华大学学报(自然科学版)》.
  20. Shouguo Shen, Beizhi Li, Weicheng Guo (2019). Experimental study on grinding-induced residual stress in C-250 maraging steel. The International Journal of Advanced Manufacturing Technology.DOI
  21. Chongjun Wu, Weicheng Guo, Zhouping Wu, Qingxia Wang, Beizhi Li (2019). Ductility-oriented high-speed grinding of silicon carbide and process design for quality and damage control with higher efficiency. The International Journal of Advanced Manufacturing Technology.DOI
  22. Wanjiao Dong, Beizhi Li, Weicheng Guo, Qinzhi Zhou (2019). Deformation Analysis of Hydrostatic Guideways Based on the Cantilever Plate Bending Calculation Method. Tribology Transactions.DOI
  23. Wanjiao Dong, Beizhi Li, Chongjun Wu, Qinzhi Zhou, Weicheng Guo (2019). Optimization Design Method for Hydrostatic Guideway Based on PM Restrictor. IOP Conference Series Materials Science and Engineering.DOI
  24. Weicheng Guo, Beizhi Li, Shouguo Shen, Qinzhi Zhou (2019). An intelligent grinding burn detection system based on two-stage feature selection and stacked sparse autoencoder. The International Journal of Advanced Manufacturing Technology.DOI
  25. Weicheng Guo, Beizhi Li, Qinzhi Zhou (2019). An intelligent monitoring system of grinding wheel wear based on two-stage feature selection and Long Short-Term Memory network. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
  26. Shouguo Shen, Beizhi Li, Weicheng Guo (2019). Surface integrity in grinding of C-250 maraging steel with resin-bonded and electroplated CBN grinding wheels. The International Journal of Advanced Manufacturing Technology.DOI
  27. Chongjun Wu, Jingzhu Pang, Beizhi Li, Steven Y. Liang (2019). High-speed grinding of HIP-SiC ceramics on transformation of microscopic features. The International Journal of Advanced Manufacturing Technology.DOI
  28. Shouguo Shen, Beizhi Li, Weicheng Guo (2019). Residual Stresses Distributions in Grinding of 3J33 Maraging Steel with Miniature Electroplated CBN Wheel. MATEC Web of Conferences.DOI
  29. Chongjun Wu, Weicheng Guo, Zhouping Wu, Kangmei Li, Beizhi Li, Steven Y. Liang (2019). High speed toughening-based ceramics grinding mechanism for quality and efficiency. Journal of Advanced Mechanical Design Systems and Manufacturing.DOI
  30. 赵仁瀚，李蓓智，杨建国（2018）. 高速铣削航空铝合金的工艺参数优化研究. 《组合机床与自动化加工技术》.
  31. 徐利军，李蓓智，杨建国（2018）. 导轨速度对静压导轨承载性能的影响. 《机床与液压》.
  32. 蒯天任，周亚勤，李蓓智，杨建国（2018）. 小孔孔径及同轴度精密影像测量算法的研究. 《机械设计与制造》.
  33. 李炜，李蓓智，张瑄珺，王懿喆，郭淼现（2018）. 基于MATLAB的机床工作台平面度激光测量研究. 《应用激光》.
  34. Weicheng Guo, Beizhi Li, Shouguo Shen, Qinzhi Zhou (2018). Experimental study on force model in grinding of maraging steel 3J33. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
  35. Jingzhu Pang, Chongjun Wu, Yiming Shen, Siqi Liu, Qingxia Wang, Beizhi Li (2018). Heat flux distribution and temperature prediction model for dry and wet cylindrical plunge grinding. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
  36. Wei Guo, Beizhi Li, Shou Guo Shen, Chong Jun Wu, Jun Peng Hu (2018). An Empirical Model for Prediction of Residual Stress Based on Grinding Forces. Materials science forum.DOI
  37. Yawei Zhang, Beizhi Li, Jianguo Yang, Xiao Liu, Jinqiang Zhou (2018). Silicon Carbide Surface Quality Prediction Based on Artificial Intelligence Methods on Multi-sensor Fusion Detection Test Platform. Machining Science and Technology.DOI
  38. Man Zhao, Xia Ji, Beizhi Li, Steven Y. Liang (2018). Effect of crystallographic orientation on the hardness of polycrystalline materials AA7075. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
  39. Yao Liu, Beizhi Li, Lingfei Kong, Yang Liu, Yihao Zheng (2018). Experimental and modeling study of temperature in calcified plaque grinding. The International Journal of Advanced Manufacturing Technology.DOI
  40. Yao Liu, Beizhi Li, Yihao Zheng (2018). Investigation of High-Speed Nanogrinding Mechanism Based on Molecular Dynamics.DOI
  41. Yao Liu, Beizhi Li, Chongjun Wu, Lingfei Kong, Yihao Zheng (2018). Smoothed particle hydrodynamics simulation and experimental analysis of SiC ceramic grinding mechanism. Ceramics International.DOI
  42. Jingzhu Pang, Chongjun Wu, Qingxia Wang, Beizhi Li (2018). Modeling of grinding wheel topography based on a joint method of 3D microscopic observation and embedded grindable thermocouple technique. The International Journal of Advanced Manufacturing Technology.DOI
  43. Yao Liu, Beizhi Li, Lingfei Kong (2018). Molecular dynamics simulation of silicon carbide nanoscale material removal behavior. Ceramics International.DOI
  44. Yao Liu, Beizhi Li, Lingfei Kong (2018). Atomistic insights on the nanoscale single grain scratching mechanism of silicon carbide ceramic based on molecular dynamics simulation. AIP Advances.DOI
  45. Yao Liu, Beizhi Li, Lingfei Kong (2018). A molecular dynamics investigation into nanoscale scratching mechanism of polycrystalline silicon carbide. Computational Materials Science.DOI
  46. Man Zhao, Xia Ji, Beizhi Li, Steven Y. Liang (2018). Forces prediction in micro-grinding single-crystal copper considering the crystallographic orientation. Manufacturing Review.DOI
  47. Xia Ji, Beizhi Li, Steven Y. Liang (2018). Analysis of Thermal and Mechanical Effects on Residual Stress in Minimum Quantity Lubrication (MQL) Machining.DOI
  48. 李蓓智，董婉娇，杨建国（2017）. 高精度竖直液体静压滑台设计与测控方法的学术研究进展. 《中国机械工程学会机械自动化分会&中国自动化学会制造技术专委会学术工作进展报告 2017》.
  49. 杨建国，李蓓智，王庆霞，董婉娇（2017）. 高性能惯性导航关键件微细加工工艺与装备研究进展. 《中国机械工程学会机械自动化分会&中国自动化学会制造技术专委会学术工作进展报告 2017》.
  50. 陈杰，李蓓智，杨建国（2017）. 挠性接头细颈微细磨削仿真研究. 《组合机床与自动化加工技术》.
  51. 董婉娇，李蓓智，杨建国（2017）. 纳米级精度的竖直液体静压滑台设计. 《光学精密工程》.
  52. 王庆霞，胡晓伟，庞静珠，尹玉环，李蓓智 (2017). Experimental Investigations of Axial Force Monitoring and Control for Friction Stir Welding Process. Journal of Donghua University(English Edition).
  53. 李蓓智（2017）. 机械制造技术基础. 《上海科学技术出版社》.
  54. Yawei Zhang, Beizhi Li, Jianguo Yang, Steven Y. Liang (2017). Modeling and optimization of alloy steel 20CrMnTi grinding process parameters based on experiment investigation. The International Journal of Advanced Manufacturing Technology.DOI
  55. Xiaohui Jiang, Miaoxian Guo, Beizhi Li (2017). Active control of high-frequency tool-workpiece vibration in micro-grinding. The International Journal of Advanced Manufacturing Technology.DOI
  56. Chongjun Wu, Beizhi Li, Yao Liu, Steven Y. Liang (2017). Surface roughness modeling for grinding of Silicon Carbide ceramics considering co-existence of brittleness and ductility. International Journal of Mechanical Sciences.DOI
  57. Wei Li, Beizhi Li, Jianguo Yang (2017). Design and dynamic optimization of an ultra-precision micro grinding machine tool for flexible joint blade machining. The International Journal of Advanced Manufacturing Technology.DOI
  58. Yao Liu, Beizhi Li, Yihao Zheng, Albert J. Shih (2017). Experiment and smooth particle hydrodynamics simulation of debris size in grinding of calcified plaque in atherectomy. CIRP Annals.DOI
  59. Chongjun Wu, Beizhi Li, Jianguo Yang, Steven Y. Liang (2017). Comparison of Machining Temperature in High Speed Grinding of Metallic Materials and Brittle Materials. MATEC Web of Conferences.DOI
  60. Wei Li, Beizhi Li, Jianguo Yang (2017). Dynamic Characteristics Analysis of a Micro Grinding Machine Tool. MATEC Web of Conferences.DOI
  61. Wan-Jiao Dong, Beizhi Li, Jian-Guo Yang (2017). Design for vertical liquid hydrostatic slide with nano-scale precision.DOI
  62. 王宸龙，李蓓智，杨建国（2016）. 基于机器视觉的分度夹具转角误差测量. 《组合机床与自动化加工技术》.
  63. 严樱子，李蓓智，杨建国，代彬彬（2016）. 铣削方式对残余应力影响的仿真及试验研究. 《现代制造工程》.
  64. 崔文锋，李蓓智，杨建国（2016）. 基于误差敏感度的纳米机床综合误差优化. 《东华大学学报(自然科学版)》.
  65. 李蓓智（2016）. 互换性与技术测量. 《华中科技大学出版社》.
  66. 金翔，李蓓智（2016）. 高速电主轴动刚度的计算与测试方法. 《现代制造工程》.
  67. Yinchen Ma, Jianguo Yang, Beizhi Li, Jun Lu (2016). An analytical model of grinding force based on time-varying dynamic behavior. The International Journal of Advanced Manufacturing Technology.DOI
  68. Man Zhao, Xia Ji, Beizhi Li, Steven Y. Liang (2016). Investigation on the influence of material crystallographic orientation on grinding force in the micro-grinding of single-crystal copper with single grit. The International Journal of Advanced Manufacturing Technology.DOI
  69. Manik Rajora, Pan Zou, Yao Guang Yang, Zhi Wen Fan, Hung Yi Chen, Wen Chieh Wu, Beizhi Li, Steven Y. Liang (2016). A split-optimization approach for obtaining multiple solutions in single-objective process parameter optimization. SpringerPlus.DOI
  70. Jingzhu Pang, Beizhi Li, Yao Liu, Chongjun Wu (2016). Rayleigh heat flux distribution model investigation and workpiece temperature prediction in the cylindrical grinding. The International Journal of Advanced Manufacturing Technology.DOI
  71. Chongjun Wu, Beizhi Li, Yao Liu, Jingzhu Pang, Steven Y. Liang (2016). Strain rate-sensitive analysis for grinding damage of brittle materials. The International Journal of Advanced Manufacturing Technology.DOI
  72. Chongjun Wu, Beizhi Li, Steven Y. Liang (2016). A critical energy model for brittle–ductile transition in grinding considering wheel speed and chip thickness effects. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
  73. Chen-Long Wang, Beizhi Li, Jianguo Yang (2016). Research on the evaluation and detection method of multi-process transposition fixture locating precision.DOI
  74. Ding Zishan, Beizhi Li, Liang Y. Steven (2016). Material phase transformation at high heating rate during grinding. Machining Science and Technology.DOI
  75. Xiaohui Jiang, Beizhi Li, Lianfeng Wang, Zhonghou Wang, Haolin Li (2016). An approach to evaluate the effect of cutting force and temperature on the residual stress generation during milling. The International Journal of Advanced Manufacturing Technology.DOI
  76. Chongjun Wu, Beizhi Li, Jianguo Yang, Steven Y. Liang (2016). Prediction of grinding force for brittle materials considering co-existing of ductility and brittleness. The International Journal of Advanced Manufacturing Technology.DOI
  77. Miaoxian Guo, Beizhi Li, Zishan Ding, Steven Y. Liang (2016). Empirical modeling of dynamic grinding force based on process analysis. The International Journal of Advanced Manufacturing Technology.DOI
  78. Qing 'an Li, Steven Y. Liang, Jian-guo Yang, Beizhi Li (2016). Long Range Dependence Prognostics for Bearing Vibration Intensity Chaotic Time Series. Entropy.DOI
  79. Miaoxian Guo, Beizhi Li (2016). A frequency-domain grinding force model-based approach to evaluate the dynamic performance of high-speed grinding machine tools. Machining Science and Technology.DOI
  80. Chongjun Wu, Beizhi Li, Jingzhu Pang, Steven Y. Liang (2016). Ductile grinding of Silicon carbide in high speed grinding. Journal of Advanced Mechanical Design Systems and Manufacturing.DOI
  81. Jingzhu Pang, Beizhi Li, Yao Liu, Chongjun Wu (2016). Heat Flux Distribution Model in the Cylindrical Grinding Contact Area. Procedia Manufacturing.DOI
  82. Zishan Ding, Beizhi Li, Omar Fergani, Yamin Shao, Steven Y. Liang (2016). Investigation of Temperature and Energy Partition During Maraging Steel Micro-grinding. Procedia CIRP.DOI
  83. Jingzhu Pang, Chongjun Wu, Beizhi Li, Yaqin Zhou, Steven Y. Liang (2016). Experimental Investigation Of The Real Contact Arc Length Measurement In The Cylindrical Plunge Grinding. MATEC Web of Conferences.DOI
  84. 朱涛，王庆霞，李蓓智，曾省忠（2015）. 微细加工磨削温度的理论分析和试验研究. 《组合机床与自动化加工技术》.
  85. 张子龙，王庆霞，李蓓智（2015）. 基于.NET的数控机床状态监测系统的设计与实现. 《组合机床与自动化加工技术》.
  86. 施烁，李蓓智，邹攀，杨建国（2015）. 基于生产资源的柔性作业调度任务优选方法. 《制造业自动化》.
  87. 刘湘林，李蓓智，杨建国，周振新，江小辉（2015）. 高弹性合金钢的微细磨削仿真. 《东华大学学报(自然科学版)》.
  88. 何剑，李蓓智，杨建国，李炜（2015）. 微细加工机床立柱结构优化设计. 《东华大学学报(自然科学版)》.
  89. 王小蓉，李蓓智，周亚勤，杨建国，施烁（2015）. 基于混合遗传算法的柔性作业车间调度研究. 《现代制造工程》.
  90. 付振振，李蓓智，杨建国，周亚勤（2015）. 挠性接头细颈测量及图像处理方法研究. 《中国测试》.
  91. Beizhi Li, Yingzi Yan, Jianguo Yang (2015). Influence and optimization criterion of milling modes and process parameters on residual stress. International Conference on Advanced Design and Manufacturing Engineering (ICADME).DOI
  92. Yao Liu, Beizhi Li, Chongjun Wu, Yihao Zheng (2015). Simulation-based evaluation of surface micro-cracks and fracture toughness in high-speed grinding of silicon carbide ceramics. The International Journal of Advanced Manufacturing Technology.DOI
  93. Zishan Ding, Beizhi Li, Yamin Shao, Steven Y. Liang (2015). Phase Transition at High Heating Rate and Strain Rate During Maraging Steel C250 Grinding. Materials and Manufacturing Processes.DOI
  94. Xiaoyan Zuo, Beizhi Li, Jianguo Yang (2015). Error sensitivity analysis and precision distribution for multi-operation machining processes based on error propagation model. The International Journal of Advanced Manufacturing Technology.DOI
  95. Xia Ji, Pan Zou, Beizhi Li, Manik Rajora, Yamin Shao, Steven Y. Liang (2015). Prediction and Optimization of Residual Stresses on Machined Surface and Sub-Surface in MQL Turning.DOI
  96. Beizhi Li, Zishan Ding, Jie Xiao, Steven Y. Liang (2015). Maraging steel 3J33 phase transformation during micro-grinding. Materials Letters.DOI
  97. Chong Jun Wu, Beizhi Li, Steven Y. Liang, Jianguo Yang (2015). Experimental Investigations on Cylindrical Grinding Temperature of Silicon Carbide. Advanced materials research.DOI
  98. Yamin Shao, Omar Fergani, Beizhi Li, Steven Y. Liang (2015). Residual stress modeling in minimum quantity lubrication grinding. The International Journal of Advanced Manufacturing Technology.DOI
  99. Zishan Ding, Beizhi Li, Steven Y. Liang (2015). Phase transformation and residual stress of Maraging C250 steel during grinding. Materials Letters.DOI
  100. Zishan Ding, Beizhi Li, Steven Y. Liang (2015). Maraging steel phase transformation in high strain rate grinding. The International Journal of Advanced Manufacturing Technology.DOI
  101. Yamin Shao, Beizhi Li, Steven Y. Liang (2015). Predictive Modeling of Surface Roughness in Grinding of Ceramics. Machining Science and Technology.DOI
  102. Yamin Shao, Beizhi Li, Kuo‐Ning Chiang, Steven Y. Liang (2015). Physics-based analysis of minimum quantity lubrication grinding. The International Journal of Advanced Manufacturing Technology.DOI
  103. Yamin Shao, Omar Fergani, Zishan Ding, Beizhi Li, Steven Y. Liang (2015). Experimental Investigation of Residual Stress in Minimum Quantity Lubrication Grinding of AISI 1018 Steel. Journal of Manufacturing Science and Engineering.DOI
  104. Pan Zou, Beizhi Li, Steven Y. Liang (2015). An Improved General Regression Neural Network for Prediction Based on Small Samples Data. Applied Mechanics and Materials.DOI
  105. Yawei Zhang, Pan Zou, Beizhi Li, Steven Y. Liang (2015). Study on optimized principles of process parameters for environmentally friendly machining austenitic stainless steel with high efficiency and little energy consumption. The International Journal of Advanced Manufacturing Technology.DOI
  106. Miao-Xian Guo, Beizhi Li, Jian-Guo Yang, Steven Y. Liang (2015). Study of experimental modal analysis method of machine tool spindle system. Journal of Vibroengineering.DOI
  107. Miao-Xian Guo, Beizhi Li, Jian-Guo Yang, Wei Li, Steven Y. Liang (2015). Active Piezoelectric Vibration Isolation System of Machine Tools.DOI
  108. 王冲冲，李蓓智，杨建国，张家梁（2014）. 微型铣刀在位检测方法及系统设计. 《制造业自动化》.
  109. 乔鑫涛，李蓓智，杨建国（2014）. 微铣削主轴-刀具系统研究. 《组合机床与自动化加工技术》.
  110. Xia Ji, Beizhi Li, Xueping Zhang, Steven Y. Liang (2014). The effects of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress. International Journal of Precision Engineering and Manufacturing.DOI
  111. Xia Ji, Xueping Zhang, Beizhi Li, Steven Y. Liang (2014). Modeling the Effects of Minimum Quantity Lubrication on Machining Force, Temperature, and Residual Stress. Machining Science and Technology.DOI
  112. Zi Shan Ding, Beizhi Li, Pan Zou, Steven Y. Liang (2014). Material Phase Transformation during Grinding. Advanced materials research.DOI
  113. Beizhi Li, Xiaohui Jiang, Jianguo Yang, Steven Y. Liang (2014). Effects of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part. Journal of Materials Processing Technology.DOI
  114. Manik Rajora, Alexander H. Shih, Pan Zou, Beizhi Li, Steven Y. Liang (2014). A Hybrid Neural Network for Prediction of Surface Roughness in Machining. Applied Mechanics and Materials.DOI
  115. Xia Sheng, Beizhi Li, Zhouping Wu, Huyan Li (2014). Calculation of ball bearing speed-varying stiffness. Mechanism and Machine Theory.DOI
  116. Dahu Zhu, Sijie Yan, Beizhi Li (2014). Single-grit modeling and simulation of crack initiation and propagation in SiC grinding using maximum undeformed chip thickness. Computational Materials Science.DOI
  117. Beizhi Li, Xiaoyan Zuo, Jianguo Yang, Xiaohui Jiang, Junhui Ni (2014). Interactive influence of linked characteristics during machining of thin-walled parts. The International Journal of Advanced Manufacturing Technology.DOI
  118. Dahu Zhu, Beizhi Li, Han Ding (2014). A combined model with optimal solution for prediction of grinding temperature. International Journal of Materials and Product Technology.DOI
  119. Zhou-Ping Wu, Beizhi Li, Jian-Guo Yang, Steven Y. Liang (2014). Effect of grinding wheel on the dynamic performance of high-speed spindle system with an improved FE model. Journal of Vibroengineering.DOI
  120. Chong-Chong Wang, Beizhi Li, Jian-Guo Yang, Jia-Liang Zhang (2014). On-line detection method for micro-milling and system design.
  121. 李康，李蓓智，杨建国，江小辉（2013）. 薄壁弱刚性件的工艺方法及变形控制研究. 《组合机床与自动化加工技术》.
  122. 李大虎，李蓓智（2013）. 单颗磨粒磨削成屑机理的分子动力学模拟. 《组合机床与自动化加工技术》.
  123. 张电丛，李蓓智，张家梁，庞静珠（2013）. 钛合金高速外圆磨削的温度特征实验研究. 《组合机床与自动化加工技术》.
  124. 周亚勤，李蓓智，杨建国，杨鹏（2013）. 响应随机扰动的受影响工序重调度方法研究. 《制造技术与机床》.
  125. Beizhi Li, Jiaming Ni, Jianguo Yang, Steven Y. Liang (2013). Study on high-speed grinding mechanisms for quality and process efficiency. The International Journal of Advanced Manufacturing Technology.DOI
  126. Zhouping Wu, Beizhi Li, Jianguo Yang, Xia Sheng (2013). A thermodynamics coupled modeling approach for analysis and improvement of high-speed motorized spindle system. Journal of Vibroengineering.DOI
  127. Xia Ji, Xue Ping Zhang, Beizhi Li, Steven Y. Liang (2013). Predictive Modeling of Minimum Quantity Lubrication: Cutting Force, Temperature and Residual Stress. Applied Mechanics and Materials.DOI
  128. Xiaoyan Zuo, Beizhi Li, Jianguo Yang, Xiaohui Jiang (2013). Application of the Jacobian–torsor theory into error propagation analysis for machining processes. The International Journal of Advanced Manufacturing Technology.DOI
  129. Zhou Ping Wu, Beizhi Li, Jianguo Yang (2013). Order Vibration Analysis of High-Speed Spindle System. Advanced materials research.DOI
  130. Xiaohui Jiang, Beizhi Li, Jianguo Yang, Xiao Yan Zuo (2013). Effects of tool diameters on the residual stress and distortion induced by milling of thin-walled part. The International Journal of Advanced Manufacturing Technology.DOI
  131. Xiaoyan Zuo, Beizhi Li, Jianguo Yang, Xiaohui Jiang (2013). Integrated Geometric Error Compensation of Machining Processes on CNC Machine Tool. Procedia CIRP.DOI
  132. Jia-Ming Ni, Beizhi Li, Jing-Zhu Pang (2013). High-speed cylindrical grinding of SiC: The process characteristics and surface integrity.
  133. Beizhi Li, Shanshan Wu, Jianguo Yang, Yaqin Zhou, Min Du (2012). A three-fold approach for job shop problems: A divide-and-integrate strategy with immune algorithm. Journal Of Manufacturing Systems, Vol. 310, No. 2.DOI
  134. 李蓓智，陈华江，杨建国，周虎，兰弼（2012）. 一种适用于特征稀少零件的图像精确拼接方法. 《机械设计与制造》.
  135. 杨建国，王敏鹏，李蓓智，吕志军（2012）. 基于AHP和BP神经网络的锭子性能综合评价. 《机械设计与制造》.
  136. 曾旭，李蓓智，杨建国，张家梁（2012）. 铣削加工过程中初始误差对薄壁零件的影响研究. 《机械设计与制造》.
  137. 吕志军，刘晓芝，杨建国，李蓓智，王敏鹏（2012）. 独立成分分析及其在纺纱锭子噪音测试中的应用. 《机械设计与制造》.
  138. 张强，庞静珠，李蓓智，张电丛（2012）. 外圆磨削力测试方法及高速磨削特性研究. 《组合机床与自动化加工技术》.
  139. 刘钦辉，李蓓智，杨建国，周亚勤（2012）. 基于拓扑优化的薄壁零件装夹布局确定方法. 《组合机床与自动化加工技术》.
  140. 温志欢，李蓓智，杨建国，王庆霞，周亚勤（2012）. 基于VB和ANSYS的多框结构件铣削路径优化仿真研究. 《组合机床与自动化加工技术》.
  141. 陈栋梁，李蓓智，周虎（2012）. 基于零件轮廓形心与最小外接矩形的图像配准方法. 《制造业自动化》.
  142. 冯瑞金，李蓓智，杨建国，邬舟平（2012）. 基于MATLAB的高速磨削电主轴单元定子冷却管道的优化设计. 《机械设计与制造》.
  143. 杨建国，肖蓉，李蓓智，崔哲学，周虎（2012）. 基于机器视觉的刀具磨损检测技术. 《东华大学学报(自然科学版)》.
  144. 李蓓智，吴雪逖，杨建国，钱玲楠，胡敏（2012）. 模糊PID控制器在穿梭车控制系统的应用. 《控制工程》.
  145. 李蓓智（2012）. 高速高质量磨削理论、工艺、装备与应用. 《上海科学技术出版社》.
  146. 庞静珠，李蓓智，杨建国，张强（2012）. 基于9123C测力仪的高速外圆磨削力测量实验研究. 《制造技术与机床》.
  147. 周虎，杨建国，李蓓智（2012）. 影像测量系统中运动干扰图像的复原方法研究. 《制造技术与机床》.
  148. 刘昭，李蓓智，杨建国，崔哲学（2012）. 面向信息集成控制的多工序柔性自动加工系统设计及实现. 《东华大学学报(自然科学版)》.
  149. 庞静珠，李蓓智，杨建国，张强（2012）. 高速外圆磨削弧区工件表面温度的测试与分析. 《东华大学学报(自然科学版)》.
  150. 刘杰，李蓓智，杨建国，邬舟平，郭淼现（2012）. 高速外圆磨床电主轴系统的有限元建模和动态性能分析. 《东华大学学报(自然科学版)》.
  151. 庞静珠，李蓓智，杨建国，邬舟平（2012）. 高速磨床电主轴热刚度耦合模型的分析与优化. 《东华大学学报(自然科学版)》.
  152. Xiao Hui Jiang, Beizhi Li, Xiao Yan Zuo, Jianguo Yang (2012). Processing Parameters Optimization on Control of Residual Stresses and Distortion during High-Speed Milling of Thin-Walled Workpiece. Key engineering materials.DOI
  153. Jia Liang Zhang, Beizhi Li, Xin Chao Zhang, Qing Xia Wang (2012). A Friction Stir Welding Platform of Thin Plates. Advanced materials research.DOI
  154. Jianguo Yang, Zhi Jun Lu, Beizhi Li (2012). Quality Prediction in Complex Industrial Process with Support Vector Machine and Genetic Algorithm Optimization: A Case Study. Applied Mechanics and Materials.DOI
  155. Zhou Ping Wu, Beizhi Li, Jianguo Yang, Peng Xue (2012). Analysis and Control of Vibration Generated by High-Speed Spindle System. Advanced materials research.DOI
  156. Xiao Yan Zuo, Beizhi Li, Xiao Hui Jiang, Jian Guo Yang (2012). An Approach to Determine Clamping Forces and Clamping Sequence of Thin-Walled Workpiece during Milling Process. Advanced materials research.DOI
  157. Yaqin Zhou, Beizhi Li, Jianguo Yang, Peng Hao Yang (2012). Study on an Affected Operations Rescheduling Method Responding to Stochastic Disturbances. Springer eBooks.DOI
  158. Miao Xian Guo, Beizhi Li, Jianguo Yang (2012). Dynamic Performance Test and Analysis of Spindle System of High Speed Grinding Machine Tools. Applied Mechanics and Materials.DOI
  159. Dahu Zhu, Beizhi Li, Han Ding (2012). An improved grinding temperature model considering grain geometry and distribution. The International Journal of Advanced Manufacturing Technology.DOI
  160. Jiaming Ni, Beizhi Li (2012). Phase transformation in high-speed cylindrical grinding of SiC and its effects on residual stresses. Materials Letters.DOI
  161. Jia Ming Ni, Beizhi Li, Jing Zhu Pang (2012). The Characteristics of High-Speed Cylindrical Grinding of Silicon Carbide and its Influence on the Surface Layer. Advanced materials research.DOI
  162. Xiaohui Jiang, Beizhi Li, Jianguo Yang, Xiaoyan Zuo, Kang Li (2012). An approach for analyzing and controlling residual stress generation during high-speed circular milling. The International Journal of Advanced Manufacturing Technology.DOI
  163. Qian Xiang, Zhijun Lü, Beizhi Li, Jiang-guo Yang (2012). A process monitoring system based on multi-sensor data fusion: An experiment study. International Conference on Uncertainty Reasoning and Knowledge Engineering.DOI
  164. Junhui Ni, Beizhi Li, Jianguo Yang (2012). A pneumatic PDMS micropump with in-plane check valves for disposable microfluidic systems. Microelectronic Engineering.DOI
  165. Jia Ming Ni, Beizhi Li, Jing Zhu Pang (2012). A Practical Study on the Surface Integrity of High-Speed Cylindrical Grinding of SiC. Materials science forum.DOI
  166. Jian-Guo Yang, Beizhi Li, Li-Jie Guo, Li Wang (2012). Positioning device supporting longitudinal seam welding or girth welding of hemispherical or elliptic structural part.
  167. Xu Wu, Beizhi Li, Jian-Guo Yang, Xing-Biao Gu (2012). Bidirectional telescopic grabbing arm for rail-guided shuttle car.
  168. Shanshan Wu, Hung-Da Wan, Sanjay Kumar Shukla, Beizhi Li (2011). Chaos-based improved immune algorithm (CBIIA) for resource-constrained project scheduling problems. Expert Systems With Applications, Vol. 38, No. 4.DOI
  169. 朱婧怡，李蓓智，杨建国（2011）. 基于薄壁零件工艺刚度的工艺优化. 《机械设计与制造》.
  170. 陶晓峰，杨建国，李蓓智，李中会（2011）. 光学玻璃磁流变抛光液的研究与材料去除实验. 《机械设计与制造》.
  171. 李蓓智，刘赏，杨建国，吴喜如（2011）. 高速外圆磨床砂轮主轴系统动态特性研究. 《机械设计与制造》.
  172. 李蓓智，赵敬安，杨建国，方高明（2011）. 装夹方案与加工顺序综合优化方法研究. 《机械设计与制造》.
  173. 周振新，李蓓智，杨建国，朱大虎（2011）. 基于单颗磨粒的高速外圆磨削成屑机理研究. 《机械设计与制造》.
  174. 刘进方，陈晓川，杨建国，李蓓智（2011）. 基于免疫神经网络的飞机全生命周期成本预测. 《制造业自动化》.
  175. 方高明，李蓓智，杨建国，周亚勤（2011）. 基于Ansys的薄壁件定位结构拓扑优化方法. 《机械科学与技术》.
  176. 卫三军，李蓓智，吕志军，项前（2011）. 基于遗传退火算法的AS/RS货位分配问题求解. 《制造业自动化》.
  177. 李蓓智，周勤之，杨建国，成连民，陶晓峰（2011）. 磁流变抛光工艺的综合效应分析、建模及其控制. 《机械科学与技术》.
  178. 卫三军，李蓓智，吕志军，项前（2011）. 基于遗传退火算法的堆垛机路径优化研究. 《计算机仿真》.
  179. 程丹青，李蓓智，杨建国，王庆霞，吴贺龙（2011）. 复杂薄壁零件多工序安装关键技术研究与应用. 《现代制造工程》.
  180. 刘晓芝，杨建国，李蓓智，吕志军，马胤琛（2011）. 基于独立成分分析算法的纺纱锭子噪声测试. 《纺织学报》.
  181. 华旻峰，李蓓智，杨建国（2011）. 超高速外圆磨床动态性能分析及诊断. 《东华大学学报(自然科学版)》.
  182. 钱玲楠，李蓓智，杨建国，周亚勤，吴雪逖（2011）. 薄壁框体零件优质高效加工工艺方法. 《东华大学学报(自然科学版)》.
  183. 周虎，杨建国，李蓓智（2011）. 基于互信息测度的平面图像拼接及其测量技术. 《东华大学学报(自然科学版)》.
  184. 李蓓智，李鹏，杨建国，孙贵政（2011）. 负极片自动化生产线总体设计及其关键技术研究. 《东华大学学报(自然科学版)》.
  185. 李蓓智，吴珊珊，杨建国，SHUKLA S K (2011). An Adaptive Design for Six Sigma(ADFSS):a Simulated Annealing and Regression Analysis Embedded Approach. Journal of Donghua University(English Edition).
  186. Ya Qin Zhou, Peng Hao Yang, Beizhi Li, Jianguo Yang (2011). Study on the Repair Methods Responding to Disturbance during Production Scheduling. Advanced materials research.DOI
  187. Yi Chu Yuan, Beizhi Li, Zhen Xin Zhou, Qiang Zhang (2011). Study on the Simulation Model and Characteristics of High-Speed Grinding for Ceramics. Applied Mechanics and Materials.DOI
  188. Jianguo Yang, Zhou Rong Fu, Beizhi Li (2011). Study on Sensorless Control Model Based on a Model Reference Adaptive System with Parameter Optimization. Applied Mechanics and Materials.DOI
  189. Beizhi Li, Da Hu Zhu, Zhen Xin Zhou, Qiang Zhang, Yi Chu Yuan (2011). Research on Workpiece Surface Temperature and Surface Quality in High-Speed Cylindrical Grinding and its Inspiration. Advanced materials research.DOI
  190. Beizhi Li, Da Hu Zhu, Zhen Xin Zhou, Jing Zhu Pang, Jianguo Yang (2011). Research on Heat Transfer and Calculation Method of Workpiece Surface Temperature in High Speed Grinding. Advanced materials research.DOI
  191. Beizhi Li, Xiao Hui Jiang, Huai Jing Jing, Xiao Yan Zuo (2011). High-Speed Milling Characteristics and the Residual Stresses Control Methods Analysis of Thin-Walled Parts. Advanced materials research.DOI
  192. Jianguo Yang, Zhen Xin Zhou, Beizhi Li, Da Hu Zhu (2011). Study on the Simulation Model and High-Speed Characteristics of Cylindrical Grinding. Advanced materials research.DOI
  193. Beizhi Li, Jia Ming Ni, Zhen Xin Zhou, Jianguo Yang (2011). FEM Simulation of Strain Rate in High Speed Grinding. Advanced materials research.DOI
  194. Jing Zhu Pang, Beizhi Li, Jianguo Yang, Zhou Ping Wu (2011). Dynamic Analysis of a High-Speed Grinding Spindle. Advanced materials research.DOI
  195. Jing Zhu Pang, Beizhi Li, Jianguo Yang, Zhen Xin Zhou (2011). Temperature Simulation in High-Speed Grinding by Using Deform-3D. Advanced materials research.DOI
  196. Beizhi Li, Rui Jin Feng, Jianguo Yang, Zhou Ping Wu (2011). Optimization Methods and Application Research of Stator Cooling Pipeline in High-Speed Grinding Wheel System. Advanced materials research.DOI
  197. Ze Bin Zhou, Jianguo Yang, Beizhi Li (2011). FEM Based Prediction of Residual Stress in Thin-Walled Aluminum Process. Materials science forum.DOI
  198. Beizhi Li (2011). Testing spinning spindle noise based on independent component analysis algorithm.
  199. Fan Zhang, Beizhi Li, Jian-Guo Yang (2011). Decoupled three-rotation parallel mechanism.
  200. 杨建国，李中会，李蓓智，陶晓峰（2010）. 精密磁流变抛光装置的设计与应用. 《机械设计与制造》.
  201. 李蓓智，吴喜如，杨建国（2010）. 精密数控车床电主轴-轴承-转子系统动态性能计算分析. 《机械设计与制造》.
  202. 王庆霞，李蓓智（2010）. 基于影像测量技术的工件主动寻位问题研究. 《机械设计与制造》.
  203. 张帆，杨建国，李蓓智（2010）. 避免瞬时运动2T1R并联机构的拓扑综合. 《机械设计》.
  204. 张家梁，李蓓智，庞静珠（2010）. 刀具磨损过程中的切削力特征研究. 《制造技术与机床》.
  205. 沈琳燕，李蓓智，杨建国（2010）. 光学玻璃磨削机理的仿真研究. 《制造技术与机床》.
  206. 沈琳燕，李蓓智，杨建国，冯瑞金，周振新（2010）. 基于Deform 3D的高速超高速磨削温度的仿真研究. 《制造技术与机床》.
  207. 吕晶飞，李蓓智，杨建国（2010）. 图像测量中多件分割提取方法的应用研究. 《微计算机信息》.
  208. 毛其彬，王庆霞，李蓓智（2010）. 锭子两支承孔位置精度检测方法的研究. 《机械制造》.
  209. 李蓓智，李中会，杨建国，吴珊珊，陶晓峰 (2010). The Synthetic Effect of Magnetorheological Finishing Technology:Analysis,Modeling,and Control. Journal of Donghua University(English Edition).
  210. Zhou Ping Wu, Beizhi Li, Jianguo Yang, Rui Jin Feng (2010). Steady-State Thermal Analysis and Temperature Control of High-Speed Permanent Magnet Synchronous Motorized Spindle. Applied Mechanics and Materials.DOI
  211. Xiao Hui Jiang, Beizhi Li, Jianguo Yang, He Long Wu (2010). Research on the Properties of Milling and the Process Parameters Optimization for Aluminum-Alloy Thin-Walled Parts. Applied Mechanics and Materials.DOI
  212. Beizhi Li, Dahu Zhu, Jingzhu Pang, Jianguo Yang (2010). Quadratic curve heat flux distribution model in the grinding zone. The International Journal of Advanced Manufacturing Technology.DOI
  213. Zhou Yaqin, Beizhi Li, Wang Lv (2010). Study on job-shop scheduling with multi-objectives based on genetic algorithms. International Conference on Computer Application and System Modeling.DOI
  214. Jun Hui Ni, Beizhi Li, Jianguo Yang (2010). A MEMS-Based PDMS Micropump Utilizing Electromagnetic Actuation and Planar In-Contact Check Valves. Advanced materials research.DOI
  215. Shan Wu, Beizhi Li, Jianguo Yang (2010). A Three-Fold Approach to Solve Dynamic Job Shop Scheduling Problems by Artificial Immune Algorithm. Advanced materials research.DOI
  216. Zhou Yaqin, Beizhi Li, Yang Jianguo, Wang Qingxia (2010). Study on Modeling of Job Shop Scheduling with Multi-resource Constraints.DOI
  217. Beizhi Li, Da Hu Zhu, Jing Zhu Pang, Zhen Xin Zhou, Jianguo Yang (2010). A New Method for Temperature Measurement to Determine the Temperature Variation in Cylindrical Grinding Contact Arc. Advanced materials research.DOI
  218. Junhui Ni, Fengliang Huang, Bin Wang, Beizhi Li, Qiao Lin (2010). A planar PDMS micropump using in-contact minimized-leakage check valves. Journal of Micromechanics and Microengineering.DOI
  219. Zebin Zhou, Jianguo Yang, Beizhi Li (2010). Machining simulation and deformation prediction in the processing for thin-walled parts. International Symposium on Systems and Control in Aeronautics and Astronautics.DOI
  220. Fengliang Huang, Junhui Ni, Bin Wang, Qiao Lin, Beizhi Li (2010). Simulation of a planar PDMS micropump using in-contact, low-leakage check valves. IEEE International Conference on Nano/Micro Engineered and Molecular Systems.DOI
  221. Beizhi Li (2010). Topological synthesis of instantaneous motion-free 2T1R parallel mechanism. Journal of Machine Design.
  222. Junhui Ni, Bin Wang, Beizhi Li, Qiao Lin (2010). A planar PDMS micropump based on in-contact low-leakage check valves. IEEE International Conference on Nano/Micro Engineered and Molecular Systems.DOI
  223. 王庆霞，代素梅，李蓓智（2009）. 伪液相静压夹具及其关键件的优化设计. 《机械设计与制造》.
  224. 裴琼华，王庆霞，杨建国，李蓓智（2009）. 基于GALIL的影像测量仪运动控制系统设计. 《机械工程师》.
  225. 杨永金，张家梁，李蓓智，杨建国（2009）. 并行工程在薄壁件夹具CAD系统中的应用. 《机械》.
  226. 成连民，李蓓智，杨建国，张家梁（2009）. 磁流变抛光工艺参数的研究. 《机械》.
  227. 周泽斌，杨建国，李蓓智，吕志军，张军军（2009）. 基于PDM的3C集成技术研究. 《机械设计与制造》.
  228. 林齐，王庆霞，李蓓智，朱婧怡（2009）. 天线罩电厚度微波测量及修磨系统的研究. 《2009全国虚拟仪器大会论文集（一）》.
  229. 齐蔚华，李蓓智，朱大虎，沈琳燕（2009）. 基于单颗磨粒玻璃磨削机理的仿真研究. 《工具技术》.
  230. 林薇，李蓓智，杨建国，周亚勤（2009）. 多目标环境下的生产资源平衡和优化调度研究. 《计算机与现代化》.
  231. 周虎，李蓓智，陈少梅（2009）. 光学元件的磁流变精密抛光实验分析. 《制造技术与机床》.
  232. Dan Zhang, Beizhi Li, Jianguo Yang, Jianhe Lei (2009). DESIGN AND INTELLIGENT CONTROL OF A PIANO PLAYING ROBOT. International Journal of Information Acquisition.DOI
  233. Xu Zhang, Wei Jian, Beizhi Li, Wei Jian, Lu Wenhua, Zhao Ming (2009). Notice of Retraction: Research on Computer Control Technique of Spindle Drive for Uniform Velocity Winding.DOI
  234. Jia-Liang Zhang, Jian-Guo Yang, Beizhi Li (2009). Development of a reconfigurable welding fixture system for automotive body. ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.
  235. Dan Zhang, Jianhe Lei, Beizhi Li, Daniel Lau, Craig Cameron (2009). Design and analysis of a piano playing robot. International Conference on Information and Automation.DOI
  236. Dan Zhang, Mike Reed, Beizhi Li, Zhen Gao, Yunjian Ge (2009). Design optimization of a geneva mechanism for internal combustion engine application. International Conference on Information and Automation.DOI
  237. Dan Zhang, Beizhi Li, Jianguo Yang, Zhen Gao (2009). Conceptual Design and Kinematic Analysis of a Compliant Parallel Mechanism for Micro/Nano Scale Manipulation.DOI
  238. Jialiang Zhang, Jianguo Yang, Beizhi Li (2009). Online Detection and Control System for Auto Body Welding Fixture. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
  239. Dan Zhang, Zhen Gao, Beizhi Li (2009). Optimal Design of a 3-DOF Parallel Micromanipulator.DOI
  240. Dahu Zhu, Beizhi Li, Jingzhu Pang, Jianguo Yang, Dan Zhang (2009). Temperature Measurement in High Speed Cylindrical-Plunge Grinding Using Thermocouple.DOI
  241. Beizhi Li (2009). Pseudo-liquid static phase fixture and optimal design of its key part. Machinery Design and Manufacture.
  242. Jing-Gang Yu, Qi-Wei Ji, Jiang-Liang Zhu, Beizhi Li (2009). Method for finishing high-precision bearing-shaping abrasion wheel and feeding device thereof.
  243. Qingxia Wang, Beizhi Li, Qi-Bin Mao (2009). Localization variation stream propagation modeling of multi-operation machining in IL&SM fixturing.DOI
  244. San-Cheng Yu, Beizhi Li, Jian-Guo Yang, Xiao-Jie Yang (2009). Detection adjusting apparatus and method for thin slab assembly.
  245. Jing-Ying Zhu, Beizhi Li, Jian-Guo Yang, Qing-Xia Wang (2009). Normal thickness quick-measuring device.
  246. Beizhi Li, Jian-Guo Yang (2009). Decoupled three-rotational-degree-of-freedom parallel mechanism.
  247. 徐源，李蓓智，张家梁，闫如忠，李诗（2008）. 基于压电陶瓷的精密进给系统的应用研究. 《机械设计与制造》.
  248. 李蓓智，赵华，杨建国，周虎（2008）. 基于磁流变抛光技术的实验装置研究. 《机械设计与制造》.
  249. 王庆霞，李蓓智（2008）. 无基准零件封装夹具中工件加工误差产生机理研究及控制. 《组合机床与自动化加工技术》.
  250. 汪旭敏，陈晓川，杨建国，李蓓智（2008）. 基于WEB的库存管理系统的设计和实现. 《机械设计与制造》.
  251. 王毅，杨建国，李蓓智，张家梁，阮冬，孟琦，邹燕（2008）. 可重构新型汽车车身焊接夹具设计. 《机械设计与制造》.
  252. 阮冬，杨建国，李蓓智，解奇军，王毅（2008）. 可重构汽车车身焊接夹具的研究. 《装备制造技术》.
  253. 杨鸣亮，李蓓智，周亚勤（2008）. 蚁群算法和遗传算法融合及其在有时间窗的车辆路径问题中的应用. 《工业控制计算机》.
  254. 郑凤琴，杨建国，李蓓智，闫如忠，徐源（2008）. 微进给系统在磨床加工中的应用与研究. 《制造技术与机床》.
  255. 周虎，杨建国，李蓓智（2008）. 磁流变抛光装置中的磁路和磁屏蔽设计. 《机械制造》.
  256. 蔡萍，陈晓川，杨建国，李蓓智（2008）. 基于知识库的机械设计方案DFX多级模糊综合评价系统的研究. 《新技术新工艺》.
  257. Dan Zhang, Zhuming Bi, Beizhi Li (2008). Design and kinetostatic analysis of a new parallel manipulator. Robotics and Computer-Integrated Manufacturing.DOI
  258. Ruzhong Yan, Beizhi Li, Zhou Rong Fu (2008). Sensorless control of PMSMs based on parameter-optimized MRAS speed observer. IEEE International Conference on Automation and Logistics (ICAL).DOI
  259. Zhou Rong Fu, Jianguo Yang, Beizhi Li (2008). A Novel Speed Observer Based on Parameter-optimized MRAS for PMSMs. IEEE International Conference on Networking, Sensing and Control (ICNSC).DOI
  260. Jialiang Zhang, Beizhi Li, Yuan Xu, Jianguo Yang (2008). Macro-micro Driven Ultra-Precision Positioning Stage for Conventional Grinder. Lecture notes in computer science.DOI
  261. Beizhi Li (2008). The Machining Error Analysis and Controlling of Workpiece in Reference Free Part Encapsulation Fixture. Modular Machine Tool & Automatic Manufacturing Technique.
  262. Beizhi Li (2008). Study on Multi-level Fuzzy Synthetic Evaluation of DFX Based on Knowledge Base. New Technology & New Process.
  263. 张帆，杨建国，李蓓智 (2008). Kinematic Characteristics Analysis of 3-PRS Parallel Manipulator. Journal of Donghua University(English Edition).
  264. Jing-Gang Yu, Xi-Ru Wu, Da-Hu Zhu, Beizhi Li, Jian-Guo Yang, Sheng-Ling Wang (2008). Decoupled false shaft machine tool and two-rotary and one-moving parallel connection mechanism.
  265. Beizhi Li, Jian-Guo Yang, An-Wei Wang (2008). Precise magnetic flowage polishing system for optics parts and method thereof.
  266. Da-Hu Zhu, Beizhi Li, Jianguo Yang (2008). Research on Heat Flux Distribution in Deep Grinding.DOI
  267. 李蓓智（2007）. 先进制造技术. 《高等教育出版社》.
  268. 徐建华，李蓓智，张家梁，史哲（2007）. 基于Imageware和UG的汽车阀体的反求设计. 《机械设计与制造》.
  269. 闫如忠，杨建国，李蓓智，杜登超（2007）. 基于压电陶瓷的微进给工作台及其控制系统的软硬件实现. 《组合机床与自动化加工技术》.
  270. Zhou Rong Fu, Beizhi Li, Jianguo Yang, Ruzhong Yan (2007). A sliding model speed/position observer integrated with a PI controller for PM synchronous motors. IEEE International Conference on Robotics and Biomimetics (ROBIO).DOI
  271. Ruzhong Yan, Beizhi Li, Jianguo Yang, DU Deng-chao (2007). Research on Micro-feed System in Ultra-precision Grinder. IEEE International Conference on Automation and Logistics (ICAL).DOI
  272. Beizhi Li (2007). Study on Direct Torque Control of Induction Motor Based on MRAS. Journal of Shanghai University of Engineering Science.
  273. Ya-Qin Zhou, Beizhi Li, Jian-Guo Yang (2007). A biological intelligent scheduling algorithm for scheduling with batch size and non-cutting time consideration. International Journal of Manufacturing Technology and Management (IJMTM).DOI
  274. Jia-Liang Zhang, Beizhi Li, Jian-Guo Yang, Qi Jie (2007). Vehicle bodywork soldering cramping apparatus self-adapting adjusting apparatus and method thereof.
  275. Beizhi Li, Jia-Liang Zhang, Jian-Guo Yang, Dong-Sheng Ruan, Yi Wang (2007). Flexible reconstruction automobile welding and assembling clamp.
  276. Beizhi Li, Jian-Guo Yang (2007). Movement decoupling spherical surface rotating paralleling mechanism can be used as the robot wrist joint.
  277. Jia-Liang Zhang, Beizhi Li, Jian-Guo Yang, Qi Jie, Yao-Kun Jin (2007). Modular self-adaptive regulation clamp to weld car and its regulating method.
  278. Beizhi Li, Jian-Guo Yang, Fu Zhou, Ru-Zhong Yan, D. Du (2007). Microfeeding system for precisive grinding.
  279. 程常运，杨建国，李蓓智（2006）. 一种履带式管内机器人控制系统研究. 《机械工程师》.
  280. 王浩林，李蓓智，杨建国，王立峰（2006）. 面向超精密磨削的压电陶瓷驱动微进给控制系统. 《机械工程师》.
  281. 慕少鹏，李蓓智，杨建国，刘佳亮（2006）. IL&SM安装系统在复杂形状零件加工中的应用. 《机械设计与制造》.
  282. 徐翔，杨建国，李蓓智，张家梁，周复（2006）. 一种基于AT89C51微处理器的智能温度测控系统. 《制造业自动化》.
  283. 刘佳亮，李蓓智，杨建国，慕少鹏（2006）. 基于UG平台二次开发的数控加工CAPP系统. 《机械设计与制造》.
  284. Xiaozhi Chen, Beizhi Li (2006). Acoustic emission method for tool condition monitoring based on wavelet analysis. The International Journal of Advanced Manufacturing Technology.DOI
  285. Zhou Yaqin, Beizhi Li, Yang Jianguo, Wang Qingxia (2006). An immune algorithm for batch job-shop scheduling with multi-objectives. International Technology and Innovation Conference (ITIC).DOI
  286. Fan Zhang, Yang Jianguo, Beizhi Li, Dan Zhang (2006). Kinematic Accuracy Analysis of a 3-DOF Parallel Kinematic Machine. World Congress on Intelligent Control and Automation.DOI
  287. Beizhi Li, Jian-Guo Yang, Wei Chen, A-Mao Pan, Ru-Zhong Yan, Fu Zhou (2006). Ultraprecise grinder with two stages of feeding mechanism and its control method.
  288. Qingxia Wang, Beizhi Li, Jian-Guo Yang, Ya-Qin Zhou (2006). The impact of initiative locating and state memory fixturing (IL&SM ) on workpiece location position with CNC machining.DOI
  289. 逄境飞，张家梁，杨建国，李蓓智，宋立博（2005）. 一种蠕动式管内机器人的研制. 《机械设计与制造》.
  290. 慕少鹏，李蓓智，王庆霞，张家梁（2005）. 槽筒数字化设计与制造方法的研究及应用. 《组合机床与自动化加工技术》.
  291. 王庆霞，李蓓智（2005）. 工件位置加工误差的分析与建模. 《组合机床与自动化加工技术》.
  292. 谢文彬，杨建国，李蓓智，宋立博（2005）. 管道检测机器人的研制. 《机械工程师》.
  293. 宋立博，张家梁，杨建国，李蓓智（2005）. 变结构控制方法在AGV控制器设计中的应用. 《机械科学与技术》.
  294. 张曦，李蓓智，杨建国（2005）. 面向超精密加工的压电陶瓷驱动微进给系统的控制实现. 《机械设计与制造》.
  295. Yaqin Zhou, Beizhi Li, Jianguo Yang (2005). Study on job shop scheduling with sequence-dependent setup times using biological immune algorithm. The International Journal of Advanced Manufacturing Technology.DOI
  296. Beizhi Li (2005). The Position Error Analysis and Modeling of the Machined Workpiece. Modular Machine Tool & Automatic Manufacturing Technique.
  297. Beizhi Li (2005). Design of an AGV Controller Based on Variable Structure Control. Mechanical Science and Technology.
  298. Beizhi Li (2005). Development of a Magnetic-guided Automatic Guided Vehicle's Experimental Set.
  299. Fan Zhang, Dan Zhang, Jian-Guo Yang, Beizhi Li (2005). Kinematics and singularity analysis of a 3-DOF parallel kinematic machine. IEEE International Conference Mechatronics and Automation, 2005.DOI
  300. 张华德，李蓓智，杨建国，庞静珠（2004）. 数控加工过程监测中的信号采集及其预处理方法研究. 《先进制造技术论坛暨第三届制造业自动化与信息化技术交流会论文集》.
  301. 金宇松，李蓓智，王庆霞（2004）. 基于典型工艺的NC自动编程工具. 《组合机床与自动化加工技术》.
  302. Chen Xiaochuan, Yang Jianguo, Beizhi Li, Xin‐An Feng (2004). Methodology and technology of design for cost (DFC). World Congress on Intelligent Control and Automation.DOI
  303. 周亚勤，李蓓智，陈革 (2003). Job-shop Scheduling with Multi-objectives Based on Genetic Algorithms. Journal of Donghua University(English Edition).
  304. 杨建国，李蓓智 (2003). Multi-objective Scheduling Using an Artificial Immune System. Journal of Donghua University(English Edition).
  305. 李蓓智，杨建国，周亚勤，邵世煌 (2003). Event-driven Dynamic and Intelligent Scheduling for Agile Manufacturing Based on Immune Mechanism and Expert System. Journal of Donghua University(English Edition).
  306. Beizhi Li (2003). Development of Information Processing System for Initiative Location and State Memory Fixtures.
  307. 李蓓智，杨建国，丁惠敏（2002）. 基于生物免疫机理的智能调度系统建模与仿真. 《计算机集成制造系统》.
  308. 杨建国，李蓓智，俞蕾（2002）. 基于免疫遗传算法的优化设计. 《机械设计》.
  309. 李蓓智，杨建国，周理兵，项前 (2002). Phase Change-based Fixturing for Arbitrarily Shaped Components. Journal of Donghua University(English Edition).
  310. 李蓓智，吴良，周天经（2001）. 无基准零件封装夹具中填充材料的研究与应用. 《机械工程材料》.
  311. 俞蕾，杨建国，李蓓智（2001）. CAD/DFM系统中的多评价系统集成. 《东华大学学报(自然科学版)》.
  312. 王鹏，李蓓智，刘春峰（2001）. 面向对象的冷藏箱CAD系统研制. 《东华大学学报(自然科学版)》.
  313. 李蓓智，杨建国，李海燕，俞蕾（2000）. 无基准零件封装夹具中的填充材料研究与应用. 《第一届国际机械工程学术会议论文集》.
  314. 杨建国，李蓓智（2000）. 非传统工件安装技术与通用夹具系统的研究. 《制造业自动化》.
  315. Beizhi Li (2000). Rapid Location and State Memory Fixturing Technique and a New Universal Fixture System.
  316. Beizhi Li, Jian-Guo Yang, Tian-Jing Zhou (2000). Universal clamping means.
  317. Beizhi Li, Jian-Guo Yang (2000). INDUSTRIALIZATION OF REFERENCE FREE PART ENCAPSULATION FIXTURES.
  318. 李蓓智，杨建国，丁惠敏 (2000). A Rapid Location and State Memory Fixture System for Arbitrarily Shaped Part. Journal of Donghua University(English Edition).
  319. 徐茂山，李蓓智，杨建国（1998）. 夹具CAD系统的信息控制与管理. 《东华大学学报(自然科学版)》.
  320. 杨建国，李蓓智（1998）. 广义随机制造系统的运行与控制机制. 《制造业自动化》.
  321. 杨建国，李蓓智，王庆霞，邵世煌 (1998). An Order-oriented Procedure Model for A Robust and Agile Production System. Journal of Donghua University(English Edition).
  322. 李蓓智 (1997). ORDERED-OBJECT-ORIENTED METHOD:A NEW APPROACH OF SAMPLE PART CALCULATION AND DESIGN. Journal of Donghua University(English Edition).
  323. 杨建国，李蓓智（1995）. CAD/CAPP中DCM方法的实现. 《东华大学学报(自然科学版)》.
  324. 李蓓智，杨建国（1993）. 基于工步特征单元的子零件组合建模法. 《制造业自动化》.
  325. 杨建国，李蓓智（1992）. CAD/CAPP中零件信息共享的研究. 《东华大学学报(自然科学版)》.
  326. 杨建国，李蓓智（1989）. CTUCAPP--1系统的设计与实现. 《制造业自动化》.

预印本

  1. Zhemin Shi, Beizhi Li, Sun Zhihong (2022). Mechanism of residual stress superposition in milling process of thin-walled parts and comprehensive deformation control method. Research Square.DOI

研究方向

机械工业金属学及金属工艺自动化技术

此主页由公开资料整理，尚未经学者本人认领。