那景新

期刊论文

1. Wei Chen, Tian Lv, Chao Chen, Jingxin Na (2026). Research on one step positive forming algorithm for high efficiency metal forming simulation based on the improved perturbation method. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
2. Wenlong Mu, Jun Jiang, Xiankun Gao, Yufeng Sun, Yang Liu, Jingxin Na (2026). Multi-scale study on low-velocity impact properties of flax/basalt continuous fiber hybrid composites. Thin-Walled Structures.DOI
3. Wenlong Mu, Xinyu Zhao, Liangyu Chen, Jun Jiang, Lianqin Wang, Jingxin Na (2026). Correction: Development and applications of cellulose-based separators for energy storage devices. Journal of Materials Science.DOI
4. Wenlong Mu, Liangyu Chen, Jun Jiang, Shuai Zhang, Jingxin Na (2026). Hydrothermal Aging Behavior and Mechanical Properties Degradation of Flax/Basalt Fiber Hybrid Composites. Polymer Composites.DOI
5. Wenlong Mu, Xinrui Zhao, Liangyu Chen, Jun Jiang, Lianqin Wang, Jingxin Na (2026). Development and applications of cellulose-based separators for energy storage devices. Journal of Materials Science.DOI
6. 于贵申，陈鑫，唐悦，赵春晖，牛艾佳，柴辉，那景新（2025）. 激光表面处理对铝-铝粘接接头剪切强度的影响. 《吉林大学学报(工学版)》.DOI
7. Wei Chen, Tian Lv, Chao Chen, Jingxin Na (2025). Research on one-step inverse forming algorithm based on the improved gradient method. Mechanics Research Communications.DOI
8. Feng Li, Tian Lv, Qianhui Xu, Jundong Ji, Xiaoying Li, Jingxin Na (2025). A failure criterion developed for crack of polyurethane adhesive bonding structures under hygrothermal aging environment. Theoretical and Applied Fracture Mechanics.DOI
9. Wei Tan, Guangbin Wang, Jingxin Na, Qinlin Jin (2025). Interlayer damage analysis of resin based fibre composites under hygrothermal and load coupling environment. Composite Interfaces.DOI
10. Wei Tan, Yuling Jiang, Guangbin Wang, Jingxin Na, Qinlin Jin (2025). The influence of thermal aging on the interlaminar mechanical properties and failure mechanisms of CFRP under complex stress states. Mechanics of Advanced Materials and Structures.DOI
11. Guofeng Qin, Qiuhan Fan, Peiwen Mi, Ming Li, Wenlong Mu, Jingxin Na (2024). Review of aging mechanisms, mechanical properties, and prediction models of fiber‐reinforced composites in natural environments. Polymer Composites.DOI
12. Wenlong Mu, Shijie Li, Xianglin Chen, Xiankun Gao, Wencui Guo, Jingxin Na, Guofeng Qin (2024). Effect of service temperature and hygrothermal aging coupling on mechanical properties of adhesively bonded BFRP-Aluminum alloy joints. International Journal of Adhesion and Adhesives.DOI
13. 王登峰，陈宏利，那景新，陈鑫（2023）. 单双搭接接头经高温老化后的失效对比. 《吉林大学学报(工学版)》.
14. Wenlong Mu, Xianglin Chen, Shijie Li, Jingxin Na (2023). Machine learning-based assessment of hygrothermal aging performance in CFRP-aluminum alloy adhesive bonded structures. The Journal of Adhesion.DOI
15. Wenlong Mu, Xianglin Chen, Shijie Li, Yufeng Sun, Qingpeng Wang, Jingxin Na (2023). Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites. Polymers.DOI
16. Hongli Chen, Hongli Chen, Dengfeng Wang, Xiaopeng Zhang, Jingxin Na, Xin Chen, Fei Lou (2023). Study on the failure criterion for extreme service conditions of polyurethane bonded structures. International Journal of Adhesion and Adhesives.DOI
17. Hongli Chen, Jingxin Na, Dengfeng Wang, Dewen Kong, Xiaopeng Zhang (2023). Numerical simulation and failure experiment of hygrothermal aged CFRP single and double lap joints. Thin-Walled Structures.DOI
18. Guofeng Qin, Liyun Zheng, Peiwen Mi, Yongjian Zhu, Ming Li, Jingxin Na, YuanWu Wang (2023). Influence of single or multi-factor coupling of temperature, humidity and load on the aging failure of adhesively bonded CFRP / aluminum alloy composite joints for automobile applications. International Journal of Adhesion and Adhesives.DOI
19. Hongli Chen, Hongli Chen, Dengfeng Wang, Jingxin Na, Xin Chen, Huan Meng (2023). Strength evaluation of polyurethane elastomeric bonded joints under extreme service conditions. International Journal of Adhesion and Adhesives.DOI
20. Guofeng Qin, Yunli Zhang, Peiwen Mi, Yongjian Zhu, Ming Li, Jingxin Na (2023). Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles. The Journal of Adhesion.DOI
21. Wei Tan, Zhaofeng Zhou, Jingxin Na, Wenlong Mu (2023). Influence of Temperature, Humidity and Load Coupling on Mechanical Properties of Adhesive Joints and Establishment of Creep Model. Polymers.DOI
22. Hongli Chen, Dengfeng Wang, Jingxin Na, Xin Chen, Jicheng Zhang (2022). Effect of loading rate on the failure of BFRP-Aluminum alloy single lap joints after hygrothermal aging. Journal of Adhesion Science and Technology.DOI
23. Wenlong Mu, Qianhui Xu, Jingxin Na, Yisa Fan, Yufeng Sun, Yang Liu (2022). Investigating the failure behavior of hygrothermally aged adhesively bonded CFRP-aluminum alloy joints using modified Arcan fixture. Thin-Walled Structures.DOI
24. Guofeng Qin, Guoshuai Li, Peiwen Mi, Yongjian Zhu, Ming Li, Jingxin Na (2022). A systematic study on the failure behaviors of aluminum alloy /composite bonded joints exposed to various typical aging environments for automobiles. The Journal of Adhesion.DOI
25. Hongli Chen, Dengfeng Wang, Jingxin Na, Xin Chen (2022). Effect of sealing treatment on mechanical properties of CFRP-Aluminum alloy single lap joints. International Journal of Adhesion and Adhesives.DOI
26. Guangbin Wang, Jingxin Na, Xin Chen (2022). Characterization and rapid prediction of the effect of hygrothermal ageing on the interlaminar shear strength of CFRP at a high temperature. Journal of Materials Science.DOI
27. Guangbin Wang, Jingxin Na, Xiaoying Li (2022). Effect of hygrothermal aging on the high-temperature interlaminar mechanical properties of CFRP under a complex stress state. The Journal of Adhesion.DOI
28. Wei Tan, Jingxin Na, Zhaofeng Zhou (2022). Effect of temperature and humidity on the creep and aging behavior of adhesive joints under static loads. The Journal of Adhesion.DOI
29. 秦国锋，糜沛纹，那景新（2021）. 胶粘剂和CFRP吸湿对复合材料粘接接头失效的影响. 《交通运输工程学报》.DOI
30. 那景新，王广彬，庄蔚敏，慕文龙，徐千卉（2021）. 复合材料粘接结构强度与环境耐久性综述. 《交通运输工程学报》.DOI
31. 范以撒，那景新，上官林建（2021）. 基于剩余强度的高速动车侧窗粘接强度校核方法. 《吉林大学学报(工学版)》.
32. 慕文龙，那景新，谭伟，王广彬，申浩，栾建泽（2021）. 基于FTIR分析的CFRP-铝合金粘接接头剩余强度预测. 《吉林大学学报(工学版)》.DOI
33. 袁正，那景新（2021）. 一种车身局部模态贡献度评价方法及其应用. 《烟台大学学报(自然科学与工程版)》.DOI
34. Wei Tan, Jingxin Na, Zhaofeng Zhou (2021). Effect of Service Temperature on Mechanical Properties of Adhesive Joints after Hygrothermal Aging. Polymers.DOI
35. Hongli Chen, Jingxin Na, Wenlong Mu, Wei Tan, Luan Jianze (2021). Effect of sealing treatment on the resistance of lap joints to hygrothermal aging. The Journal of Adhesion.DOI
36. Wei Tan, Jingxin Na, Guangbin Wang, Hongli Chen, Huan Meng (2021). Effect of temperature on the fatigue performance and failure mechanism of a flexible adhesive butt joint. The Journal of Adhesion.DOI
37. Qianhui Xu, Feng Li, Wenlong Mu, Jingxin Na, Wei Tan, Guangbin Wang (2021). Effect of hygrothermal and alternating load coupled aging on CFRP/Al bonded joints. International Journal of Adhesion and Adhesives.DOI
38. Wenlong Mu, Qianhui Xu, Jingxin Na, Heng Wang, Wei Tan, Defeng Li (2021). Influence of temperature and humidity on the fatigue behaviour of adhesively bonded CFRP/aluminium alloy joints. The Journal of Adhesion.DOI
39. Wei Tan, Jingxin Na, Guangbin Wang, Qianhui Xu, Hao zhong Shen, Wenlong Mu (2021). The effects of service temperature on the fatigue behavior of a polyurethane adhesive joint. International Journal of Adhesion and Adhesives.DOI
40. 那景新，谭伟，慕文龙，栾建泽（2020）. 湿热老化对BFRP粘接接头横向冲击力学性能的影响. 《交通运输工程学报》.DOI
41. 栾建泽，那景新，谭伟，慕文龙，秦国锋（2020）. 服役低温老化对铝合金-玄武岩纤维增强树脂复合材料粘接接头力学性能的影响及失效预测. 《复合材料学报》.DOI
42. 那景新，娄菲，纪俊栋，李锋（2020）. 车身粘接结构断裂失效准则改进. 《交通运输工程学报》.DOI
43. 秦国锋，那景新（2020）. 复合材料胶接接头温度-湿度-载荷老化机理研究概述. 《中国胶粘剂》.DOI
44. 谭伟，那景新，任俊铭，慕文龙（2020）. 高低温老化对碳纤维增强复合材料层间力学性能的影响. 《吉林大学学报(工学版)》.DOI
45. 谭伟，那景新，慕文龙，秦国锋，申浩（2020）. 服役温度对BFRP/铝合金粘接接头静态失效的影响. 《交通运输工程学报》.DOI
46. 栾建泽，宋学伟，那景新，谭伟，慕文龙（2020）. 服役温度对铝合金-碳纤维增强树脂复合材料粘接接头准静态失效的影响. 《复合材料学报》.DOI
47. 谭伟，那景新，任俊铭，慕文龙，冯耀（2020）. 高温环境下碳纤维增强树脂复合材料的层间力学性能老化行为与失效预测. 《复合材料学报》.DOI
48. 慕文龙，那景新，秦国锋，谭伟，高原，申浩（2020）. 极限温度下的CFRP-铝合金粘接接头耐久性研究. 《汽车工程》.DOI
49. 那景新，高原，慕文龙，申浩，秦国锋，谭伟（2020）. 高温老化对玄武岩纤维增强树脂复合材料-铝合金单搭接接头失效的影响. 《复合材料学报》.
50. 栾建泽，那景新，慕文龙，谭伟，陈宏利（2020）. 低速加载对铝合金-玄武岩纤维增强树脂复合材料粘接接头失效的影响. 《上海交通大学学报》.
51. 栾建泽，那景新，谭伟，慕文龙，申浩，秦国锋（2020）. 铝合金-BFRP粘接接头的服役高温老化力学性能及失效预测. 《材料工程》.
52. Tan Wei, Jingxin Na, Wenlong Mu, Guangbin Wang, Yao Feng (2020). Effects of hygrothermal aging on the mechanical properties of aluminum alloy adhesive joints for high-speed train applications. The Journal of Adhesion.DOI
53. Luan Jianze, Jingxin Na, TAN Wei, Wenlong Mu, SHEN Hao, QIN Guo-feng (2020). Mechanical properties and failure prediction of aluminum alloy-BFRP bonded joints under service high temperature aging. DOAJ (DOAJ: Directory of Open Access Journals).DOI
54. Jingxin Na, Guangbin Wang, Wenlong Mu, Wei Tan, Jundong Ji, Jian-Ze Luan (2020). Study on the fracture failure criteria for bonded structures considering temperature sensitivity. Journal of Adhesion Science and Technology.DOI
55. Yisa Fan, Linjian Shangguan, Mingyue Zhang, Han Peng, Jingxin Na (2020). Effect of cyclic hygrothermal aging on mechanical behaviours of adhesive bonded aluminum joints. Journal of Adhesion Science and Technology.DOI
56. Wenlong Mu, Jingxin Na, Guangbin Wang, Wei Tan, Qianhui Xu, Yao Feng (2020). Rapid prediction method of failure load for hygrothermally aged CFRP – Aluminum alloy single lap joints. Composite Structures.DOI
57. Wenlong Mu, Jingxin Na, Wei Tan, Guangbin Wang, Hao zhong Shen, Xiaoying Li (2020). Durability of adhesively bonded CFRP-aluminum alloy joints subjected to coupled temperature and alternating load. International Journal of Adhesion and Adhesives.DOI
58. Luan Jianze, Jingxin Na, Tan Wei, Wenlong Mu, Wang Guangbin, Yuan Gao (2020). Comparative study on mechanical properties of aluminum alloy and BFRP single lap joints with hygrothermal aging. The Journal of Adhesion.DOI
59. 慕文龙，那景新，秦国锋，谭伟，申浩（2019）. 交变载荷对CFRP复合材料-铝合金粘接接头剩余强度的影响. 《复合材料学报》.DOI
60. 吴长风，那景新，秦国锋，卢琳兆，袁正，杨佳宙（2019）. 基于子结构拓扑优化的大客车耐撞性改进. 《汽车工程》.DOI
61. 那景新，浦磊鑫，秦国锋，陈立军（2019）. 温度对钢/铝粘接接头失效强度影响的研究. 《汽车工程》.DOI
62. 吴长风，张君媛，那景新，苏亮，蓝平辉，卢琳兆（2019）. 基于客车乘员损伤的尖顶等效方波参数研究. 《汽车工程》.DOI
63. 秦国锋，那景新，慕文龙，谭伟，刘浩垒（2019）. GFRP/铝合金和铝合金/铝合金粘接接头失效对比研究. 《汽车工程》.DOI
64. 那景新，任俊铭，谭伟，陈立军（2019）. 基于刚度等效模型的减重孔板结构快速分析方法. 《交通运输工程学报》.DOI
65. 谭伟，那景新，范以撒，慕文龙，陆善彬（2019）. 考虑温度和载荷影响的动车信息窗粘接结构寿命预测. 《交通运输工程学报》.DOI
66. 那景新，刘浩垒，范以撒，秦国锋，浦磊鑫（2019）. 湿热环境对车用粘接剂拉伸强度的影响. 《吉林大学学报(工学版)》.DOI
67. Yisa Fan, Jingxin Na, Wenlong Mu, Guofeng Qin, Wei Tan (2019). Effect of Hygrothermal Cycle Aging on the Mechanical Behavior of Single-lap Adhesive Bonded Joints. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
68. 袁正，范康宁，那景新，冯慧，芦帅（2019）. 一种基于虚拟材料参数的车身刚度匹配设计方法. 《烟台大学学报(自然科学与工程版)》.DOI
69. 秦国锋，那景新，慕文龙，谭伟，栾建泽，申浩（2019）. 高温老化对CFRP/铝合金粘接接头失效的影响. 《吉林大学学报(工学版)》.
70. 秦国锋，那景新，慕文龙，谭伟（2019）. CFRP/铝合金粘接接头在低温环境中的老化机理研究. 《中国胶粘剂》.DOI
71. Jingxin Na, Wenlong Mu, Guofeng Qin, Wei Tan (2019). The Influence of Combined Hygrothermal Environment and Load on the Performance of Adhesively Bonded CFRP–Aluminum Alloy Joints. Lecture notes in electrical engineering.DOI
72. Guofeng Qin, Jingxin Na, Wenlong Mu, Wei Tan (2019). Effect of thermal cycling on the degradation of adhesively bonded CFRP/aluminum alloy joints for automobiles. International Journal of Adhesion and Adhesives.DOI
73. QIN Guofeng, Yisa Fan, Jingxin Na, MU Wenlong, Tan Boo Wei (2019). Rapid Evaluation Method of Adhesive Strength for EMU Train's Side-window Based on Sub-model Technology. Journal of Mechanical Engineering.DOI
74. 那景新，纪俊栋，慕文龙，陶士振，屈丹（2018）. 一种客车骨架接头非线性应力快速计算方法. 《汽车工程》.
75. 那景新，慕文龙，袁正，贺午阳，沈传亮（2018）. 焊接工艺对客车骨架T形接头强度的影响. 《中国公路学报》.
76. 吴长风，那景新，杨佳宙，苏亮，卢琳兆（2018）. 客车正面碰撞车身结构耐撞性分析与改进. 《客车技术与研究》.
77. 秦国锋，那景新，慕文龙，谭伟，刘浩垒，浦磊鑫（2018）. 不同应力状态下的黏接接头在汽车服役温度区间的失效载荷预测（英文）. Journal of Southeast University(English Edition).
78. 那景新，慕文龙，范以撒，谭伟，杨佳宙（2018）. 车身钢-铝粘接接头湿热老化性能. 《吉林大学学报(工学版)》.
79. 那景新，浦磊鑫，范以撒，沈传亮（2018）. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响. 《吉林大学学报(工学版)》.
80. 袁正，那景新，范康宁，芦帅（2018）. 客车车身左右侧刚度匹配特性对车身性能的影响. 《烟台大学学报(自然科学与工程版)》.
81. Wenlong Mu, Guofeng Qin, Jingxin Na, Wei Tan, Haolei Liu, Luan Jianze (2018). Effect of alternating load on the residual strength of environmentally aged adhesively bonded CFRP-aluminum alloy joints. Composites Part B Engineering.DOI
82. Guofeng Qin, Jingxin Na, Wenlong Mu, Wei Tan, Jiazhou Yang, Junming Ren (2018). Effect of continuous high temperature exposure on the adhesive strength of epoxy adhesive, CFRP and adhesively bonded CFRP-aluminum alloy joints. Composites Part B Engineering.DOI
83. Jingxin Na, Wenlong Mu, Guofeng Qin, Wei Tan, Leixin Pu (2018). Effect of temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints in the automotive industry. International Journal of Adhesion and Adhesives.DOI
84. Guofeng Qin, Yisa Fan, Jingxin Na, Wenlong Mu, Wei Tan (2018). Durability of aluminium alloy adhesive joints in cyclic hydrothermal condition for high-speed EMU applications. International Journal of Adhesion and Adhesives.DOI
85. Guofeng Qin, Jingxin Na, Wei Tan, Wenlong Mu, Jundong Ji (2018). Failure prediction of adhesively bonded CFRP-Aluminum alloy joints using cohesive zone model with consideration of temperature effect. The Journal of Adhesion.DOI
86. 那景新，刘浩垒，王文辉，秦国锋，慕文龙，冯原（2017）. 车身结构应力的免卸载测量法. 《汽车工程》.
87. 那景新，秦国锋，范以撒，张师源，刘玉（2017）. 一种客车侧窗的粘接强度校核方法. 《中国公路学报》.
88. 刘玉，那景新（2017）. 轨道车辆粘接接头强度评价方法研究. 《京津冀粘接技术研讨会暨北京粘接学会第26届学术年会》.
89. 那景新，贺午阳，张师源，袁正，陈立军（2017）. 客车粘接式车窗玻璃参数化串联刚度模型. 《吉林大学学报(工学版)》.
90. 黎勇，吴长风，蓝平辉，叶松奎，那景新（2017）. 大客车正面碰撞结构耐撞性分析与改进. 《客车技术与研究》.
91. Jingxin Na, Yisa Fan, Wei Tan, Shouwu Guo, Wenlong Mu (2017). Mechanical behavior of polyurethane adhesive bonded joints as a function of temperature and humidity. Journal of Adhesion Science and Technology.DOI
92. 那景新，袁正，贺午阳，慕文龙（2016）. 一种车身局部模块刚度贡献度的评价方法. 《汽车工程》.
93. 那景新，袁正，崔文波，贺午阳（2016）. 一种客车骨架接头焊缝焊接顺序优化方法. 《汽车工程》.
94. 那景新，杨丹瑒，郭新宇，麻文焱（2016）. 粘接式客车侧窗玻璃对客车侧翻性能的影响. 《吉林大学学报(工学版)》.
95. 陈伟，那景新（2016）. 基于拟全量理论的多步正向成形模拟方法. 《工程力学》.
96. Jingxin Na, Yu Liu, Yisa Fan, Wenlong Mu, Xin Chen, Yakun Yan (2016). Effect of temperature on the joint strength of a silyl-modified polymer-based adhesive. The Journal of Adhesion.DOI
97. Jingxin Na, Zheng Yuan, Wen-Bo Cui, Wu-Yang He（2016）. バスの溶接継手の溶接手順の最適化方法を提案した。【JST・京大機械翻訳】.
98. Wei Chen, Jingxin Na（2016）. 擬全量理論に基づく多段正方成形シミュレーション法【JST・京大機械翻訳】.
99. Jingxin Na, Zheng Yuan, Wu-Yang He, Wen-Long Mu（2016）. 車体の局所モジュールの剛性貢献度の評価方法【JST・京大機械翻訳】.
100. 那景新，张师源，郭新宇，王童（2015）. 一种客车车窗粘接胶等效模型的研究. 《汽车工程》.
101. 王童，那景新，闫亚坤，张苹苹，李婷婷（2015）. 客车侧翻一步碰撞算法中的接触修正方法研究. 《汽车技术》.
102. 王童，那景新，张苹苹（2015）. 客车侧翻一步碰撞算法中初始解预测方法的研究. 《汽车工程》.
103. 那景新，王秋林，高剑峰，刘霄希（2015）. 基于侧翻安全性的客车腰梁接头结构改进研究. 《汽车工程》.
104. 那景新，袁正，高剑峰（2015）. 焊角形状及尺寸参数对客车接头强度的影响. 《中国公路学报》.
105. 那景新，白霜，刘海鹏，闫亚坤（2015）. 半圆形拉深筋圆角半径及金属流动方向对拉深筋阻力的影响. 《吉林大学学报(工学版)》.
106. 张平，马建，那景新（2015）. 波纹管耐撞性的理论研究. 《机械强度》.
107. 陈伟，那景新，扈越萌（2015）. 冲压成形工艺对材料疲劳性能影响的实验研究. 《锻压技术》.
108. 刘浩垒，刘玉，陶士振，蔡亮，那景新（2015）. 温度对车辆胶接件拉伸强度的影响研究. 《中国胶粘剂》.
109. Jingxin Na, Yu Liu, Liang Cai, Tao Shizhen, Yakun Yan (2015). An adhesive joint strength evaluation method and its application in mechanical engineering. Journal of Adhesion Science and Technology.DOI
110. Jingxin Na, Tong Wang, Changfeng Wu, Yakun Yan (2015). A four-node membrane element model with bending modification for one-step algorithm for bus rollover impact. Engineering Computations.DOI
111. Jingxin Na, Yu Liu, Tao Shizhen, Liang Cai, Yan Ya-kun (2015). Evaluation method of adhesive joint strength based on the normal–shear stress of adhesive interface and its application in engineering. Advances in Mechanical Engineering.DOI
112. Jingxin Na, Tong Wang, Ziwen Xu, Yakun Yan (2015). Improvement research on the one-step algorithm for bus rollover collision based on the improved gradient method. International Journal of Crashworthiness.DOI
113. Jingxin Na (2015). Effects of Shape and Size Parameters of Weld Fillets on Strength of Coach Joints.
114. 那景新，张苹苹，杨志超，王童（2014）. 客车弹出式舱门侧翻保护方案的研究. 《汽车工程》.
115. 那景新，高剑峰（2014）. 基于局部搜索和整体优化的客车杆件截面参数正向设计. 《吉林大学学报(工学版)》.
116. 刘玉，姚成，那景新（2014）. 可提高客车侧翻安全性的变截面冲压立柱结构设计. 《吉林大学学报(工学版)》.
117. Jingxin Na, Yu Liu, Yuanwu Wang, Le Pan, Yakun Yan (2014). Effect of Temperature on the Joints Strength of an Automotive Polyurethane Adhesive. The Journal of Adhesion.DOI
118. Jingxin Na, Zheng Yuan, Jianfeng Gao (2014). A Novel Method for Bending Stiffness Evaluation of Bus Body. Advances in Mechanical Engineering.DOI
119. Jingxin Na, Tong Wang, Ziwen Xu (2014). Research on a one-step fast simulation algorithm for bus rollover collision based on total strain theory. International Journal of Crashworthiness.DOI
120. Jingxin Na, Zheng Yuan, Wen-Bo Cui, Guo-Feng Qin, Yu Liu, Shuang Bai, Shi-Zhen Tao, Shi-Yuan Zhang, Liang Cai, Dan-Chang Yang (2014). Mechanical welding deformation measuring apparatus and carriage frame joint welding technology optimization method.
121. Yuan Feng, Shi-Zhen Tao, Jingxin Na, Zheng Yuan, Tong Wang, Ting-Ting Li, Ping-Ping Zhang, Yu Liu (2014). Four-wheel asynchronous inverse phase steering articulated bus structure.
122. 王童，那景新，徐梓雯，杨志超（2013）. 基于拓扑优化的某客车空气弹簧支座改进研究. 《汽车工程》.
123. 陈伟，那景新（2013）. 基于全量理论的一步成形正算法. 《吉林大学学报(工学版)》.
124. Jingxin Na, Wei Chen (2013). One step positive approach for sheet metal forming simulation based on quasi-conjugate-gradient method. Chinese Journal of Mechanical Engineering.DOI
125. Jingxin Na, Zheng Yuan, Feng Liang, Jiang-Feng Gao, Ting-Ting Li, Ping-Ping Zhang, Yu Liu, Dan-Dan Guan, Tong Wang, Xin-Yu Guo (2013). Four-axis single-hinge hinge type passenger car structure.
126. 姜勇，那景新，王童（2012）. 某客车侧翻安全性吸能结构的设计. 《汽车工程》.
127. 高剑峰，那景新，王秋林，闫亚坤（2012）. 车身模态自动识别算法. 《吉林大学学报(工学版)》.
128. 高剑峰，那景新，闫亚坤（2012）. 客车骨架接头焊缝间距对疲劳性能的影响. 《北京工业大学学报》.
129. Jingxin Na, Wei Chen, Haipeng Liu (2012). ONE-STEP INVERSE APPROACH BASED ON QUASI-CONJUGATE-GRADIENT METHOD. Journal of Advanced Manufacturing Systems.DOI
130. Jingxin Na, Yakun Yan, Haipeng Liu (2012). Effect of welding seam spacing and relative bar wall thickness of bus framework on joint’s local mechanical property. Chinese Journal of Mechanical Engineering.DOI
131. Jingxin Na, Yu Liu, Xin-Yu Guo, Dan-Dan Guan, Jiang-Feng Gao, Tong Wang, Zhi-Chao Yang, Zheng Yuan, Ping-Ping Zhang, Ting-Ting Li (2012). Protective device for improving safety of cabin door air bag passenger car turning on one side.
132. Jingxin Na, Xin-Yu Guo, Yu Liu, Tong Wang, Wei Chen, Zhi-Chao Yang, Jiang-Feng Gao, Ziwen Xu, Dan-Dan Guan (2012). Telescopic automobile bumper.
133. 那景新，王秋林，屈丹，闫亚坤（2011）. 客车封闭环腰梁接头形式对侧翻安全性的影响. 《吉林大学学报(工学版)》.
134. 陈伟，张望，那景新（2011）. 基于有限元弹性迭代的坯料展开算法改进. 《塑性工程学报》.
135. 马晓光，王秋林，那景新，屈丹（2011）. 客车倾翻结构安全性仿真分析及改进设计. 《客车技术与研究》.
136. 那景新，何洪军，闫亚坤（2011）. 基于统计处理的车身弯曲刚度计算方法. 《吉林大学学报(工学版)》.
137. 那景新，韩召良，陈伟，闫亚坤（2011）. 冲压工艺对车身构件强度的影响. 《吉林大学学报(工学版)》.
138. Wenjie Zuo, Weiwei Li, Tao Xu, Shengyi Xuan, Jingxin Na (2011). A complete development process of finite element software for body-in-white structure with semi-rigid beams in .NET framework. Advances in Engineering Software.DOI
139. Jingxin Na, Jian Jiao, Yakun Yan, Haipeng Liu (2011). A membrane element model with bending modification for one step inverse method. Acta Mechanica Solida Sinica.DOI
140. Qiu-Li Wang, Tong Wang, Da Wang, Jingxin Na, Xin-Yu Guo, Wei Chen, Jiang-Feng Gao (2011). Multi-airbag group-by-group unfolding type side turnover protecting device with external airbags for passenger car.
141. Dan-Dan Guan, Xiao-Xing Liu, Qiu-Li Wang, Tong Wang, Da Wang, Jingxin Na, Jiang-Feng Gao (2011). Passenger car rollover active and passive comprehensive safety protection device based on gas injection and method.
142. 何洪军，那景新（2010）. 车架装配中的变形对半承载式客车车身结构强度的影响研究. 《客车技术与研究》.
143. 韩召良，那景新，陈伟（2010）. 车身构件冲压后板厚变化对其疲劳性能影响的研究. 《汽车技术》.
144. 那景新，何洪军，闫亚坤，陈立军（2010）. 基于构件内力优化的车身结构轻量化设计. 《吉林大学学报(工学版)》.
145. 姜勇，那景新，王明剑（2010）. 某城市客车铰盘结构强度分析. 《客车技术与研究》.
146. 那景新，安洪蔚，闫亚坤，陈立军（2010）. 梁-壳混合分析模型在客车骨架接头焊缝间距优化中的应用. 《吉林大学学报(工学版)》.
147. 张志远，那景新，何洪军（2010）. 某客车底架结构局部优化设计研究. 《客车技术与研究》.
148. 王明剑，郭文浩，那景新，姜勇（2010）. 铰接式客车铰盘连接力计算方法研究. 《客车技术与研究》.
149. Jingxin Na (2010). Research on Strength of Semi-morocoque Bus Body in View of Frame Deformation During the Assemble. Bus Technology and Research.
150. Qun Song, Dan Qu, Qiu-Li Wang, Jingxin Na, Jiang-Feng Gao (2010). Car body structure of full-loaded purely electrical passenger car.
151. 马迅，王贺，那景新（2009）. 车身概念设计阶段CAE分析的肋筋等效模型. 《吉林大学学报(工学版)》.
152. 李赫男，那景新（2009）. 某客车前桥过桥梁结构改进分析. 《客车技术与研究》.
153. 白冰，王明剑，那景新（2009）. XML6185客车空气弹簧座改进研究. 《客车技术与研究》.
154. 那景新，陈炳圣，姚成，张焱（2009）. 基于整体变形特征线的车身模态解析评价方法. 《北京工业大学学报》.
155. Jingxin Na (2009). Analysis on Structural Improvement of Front Axle's Bridge Beam for Some Bus.
156. 栾广博，王水林，那景新（2007）. 橡胶材料本构关系的矩阵展开. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（下）》.
157. 那景新，崔岸，甘维银，胡平（2006）. 局部减缩积分曲面展开单元在某汽车翼子板一步成形模拟中的应用. 《吉林大学学报(工学版)》.
158. 闫亚坤，庄蔚敏，那景新（2006）. 改进型逆有限元法在某轿车翼子板快速成形模拟中的应用. 《塑性工程学报》.
159. 那景新，高华，张丽，胡平（2005）. 一步成形模拟方法中松弛因子选取算法. 《吉林大学学报(工学版)》.
160. 那景新，焦健，闫亚坤，胡平（2005）. 初始展开面积对一步成形模拟收敛效率的影响. 《哈尔滨工业大学学报》.
161. Jingxin Na (2005). Selection Algorithm of Relaxation Factor in One Step Forming Simulation Approach.
162. Jingxin Na (2005). Effect of initial spreading area on convergence efficiency of one-stepforming simulation.
163. 陆善彬，李威，那景新，胡平，肖静（2004）. 截面线展开法在一步成形中的应用. 《吉林大学学报(工学版)》.
164. 那景新，陆善彬，闫亚坤，胡平（2004）. 改进四节点等参单元在一步成形模拟中的应用. 《固体力学学报》.
165. Jingxin Na (2004). APPLICATION OF MODIFIED INVERSE FEM IN SIMULATION OF BENDING FORMING.DOI
166. Jingxin Na, Jian Jiao, P. Hu (2003). Application of 0.618 algorithm in the one step forming simulation approach.
167. 王洪俊，那景新，李大永（2000）. 汽车覆盖件模具CAD技术的应用与发展. 《锻压装备与制造技术》.
168. Jingxin Na (2000). Simulation and Experimental Examination for the One-Off Deep Drawing Formability of an oil Pan.
169. P. Hu, Jingxin Na, Da-Yong Li (1998). Bifurcation and post-bifurcation behaviour in sheet metal tension with strong anisotropy.DOI