蔡玉奎

2026

Ultrasonic Vibration-Assisted Milling of SiCp/Al Composites: A Comparative Study of Milling Modes and Hybrid Multi-Objective Optimization

Journal of Materials Research and Technology

DOI

2026

Microcrack avalanche behavior during intermittent shear fracture of a metal alloy

International Journal of Mechanical Sciences

DOI

2026

Effect of Zr content on the microstructure, mechanical and tribological performance of TiAlSi(Zr)N coatings

Tribology International

DOI

2026

Effects of low temperature on laser ablation of Si3N4: Multi‐physics thermal–mechanical simulations and experiments

Journal of The American Ceramic Society

DOI

2026

Three-phase ultrasonic vibration cutting simulation and mechanism for SiO2f/SiO2 composites including structural anisotropy

The International Journal of Advanced Manufacturing Technology

DOI

2026

Fundamentals and processes in the laser-assisted machining difficult-to-machine materials: state of the art and future perspectives

Optics & Laser Technology

DOI

2026

Analytical modeling of ultrasonic scratching force incorporating microscopic anisotropic damage mechanisms for 2.5D braided SiO2f/SiO2 composites

Composites Part A Applied Science and Manufacturing

DOI

2026

Unveiling the microstructural evolution and hardening mechanisms in laser-assisted ultrasonically rolled Ti-6Al-4V: effects of laser energy input

Optics & Laser Technology

DOI

2026

Micro-macro damage evolution simulation approach for ultrasonic machining SiO2f/SiO2 composites

International Journal of Mechanical Sciences

DOI

2026

Theoretical modeling and experimental study of femtosecond laser scribing of copper with temperature-dependent phase explosion enthalpy

Optics & Laser Technology

DOI

2026

Thermo-fluid-field effects on material removal and surface integrity evolution during femtosecond laser processing of 4H–SiC: A multiscale numerical-experimental investigation

Journal of Materials Research and Technology

DOI

2026

Machining mechanism in laser-assisted milling of 2.5D woven SiO2f/SiO2 ceramic matrix composites using GMM–WOA

The International Journal of Advanced Manufacturing Technology

DOI

2026

Tool wear mechanisms of ultrasonic vibration-assisted milling of SiO2f/SiO2 composites considering amplitude condition

Journal of Manufacturing Processes

DOI

2026

Multi-dimensional characterization and ensemble genetic algorithm–monte carlo simulation assisted multi-objective optimization of surface integrity in intelligent machining

Tribology International

DOI

2026

A new residual stress prediction model for laser-assisted burnishing inconel718

Materials & Design

DOI

2025

面向极端工况压缩机的智能集成制造系统研究

《制造技术与机床》

DOI

2025

硬质合金刀具直角切削316L不锈钢表面黏附与黏附机理的研究

《工具技术》

2025

A task-cooperative drilling monitoring method based on heterogeneous multi-task learning: Task adaptive fusion guided by domain knowledge

Mechanical systems and signal processing

DOI

2025

Toward high-performance machining of thin-walled parts: Fusion of parallel spatial–temporal information in high-speed milling for monitoring tool wear

Measurement

DOI

2025

Machining quality improvement through ice densification pretreatment during rotary ultrasonic face grinding SiO2f/SiO2 composite

Composites. Part A, Applied science and manufacturing

DOI

2025

Model for predicting milled floor surface topography by importing actual bottom tool-edge profile details via online image acquisition

Mechanical systems and signal processing

DOI

2025

Enhanced mechanical properties of Ti-6Al-4V titanium alloy through laser-assisted burnishing

The International Journal of Advanced Manufacturing Technology

DOI

2025

Systematic error reduction in laser triangulation OMM: A study on measurement parameters and compensation techniques

Measurement

DOI

2025

Atomic inter-diffusion between Al particle and Ni substrate for metallurgical bonding during cold spraying process

Applications of Surface Science

DOI

2025

Prediction of time-varying instantaneous material removal volume with point cloud contour-filling model in milling process

Advances in Manufacturing

DOI

2025

A novel stacking-based ensemble learning framework for thermal error prediction of machine tool feed systems

Journal of Manufacturing Processes

DOI

2025

Research on a New Method of Macro–Micro Platform Linkage Processing for Large-Format Laser Precision Machining

Micromachines

DOI

2025

In-situ DIC characterization of dislocation density and stored strain energy fields for deformation zones during cutting of Ti6Al4V alloy

Measurement

DOI

2025

Laser-ultrasonic vibration hybrid assisted machining in advanced difficult-to-cut materials: Technologies, mechanisms, and challenges

Journal of Materials Processing Technology

DOI

2025

Single-sensor-based reconstruction of force and displacement fields for thin-walled cylindrical shells milling

International Journal of Machine Tools and Manufacture

DOI

2025

Atomistic insights of thermomechanical interfacial stripping—a pathway to low-damage femtosecond laser processing of layered materials

Journal of Material Science and Technology

DOI

2025

High performance machining based on fretting wear mechanism of slot milled surfaces

Tribology International

DOI

2025

Mechanism and Surface Morphology Evolution in Nanosecond Laser Polishing of the Inner Surface of Conical Holes

Nanomanufacturing and Metrology

DOI

2025

Scratching force and material removal mechanism of 2.5D SiO2f/SiO2 composites under single-abrasive scratch test

Journal of Manufacturing Processes

DOI

2025

Optimization of laser surface texturing for improved tribological performance in engine valve trains

Surface Science and Technology

DOI

2025

Ultrasonic vibration-assisted machining in aerospace composite materials: Principle, technology, challenges

Composites Part A Applied Science and Manufacturing

DOI

2025

Study on the plastic removal behavior of SiC ceramic materials in laser-assisted high-temperature turning

Optics & Laser Technology

DOI

2025

Laser surface texture for enhancement of tribological performance of AISI 5115 steel engine valve train components

Optics & Laser Technology

DOI

2025

Experimental characterization and formation mechanism of micro/nano-scale DRX grains in FGH96 machined surface layer

Materials Today Communications

DOI

2025

Modeling and simulation of 3D topographies of slot milled walls and floor surface considering slot bi-sided wall constraints

Journal of Manufacturing Processes

DOI

2025

Fabricating superhydrophobic surfaces of silicone rubber with laser abalation

Applied Surface Science

DOI

2025

Springback mechanism and precision forming process of laser array flexible forming

Journal of Manufacturing Processes

DOI

2025

Bauschinger effect in nano-grinding of 3C-SiC: A molecular dynamics study

Wear

DOI

2024

雾化射流对42CrMo钢车削断屑性能影响的实验研究

《工具技术》

2024

采用门控循环单元神经网络和多特征融合的铣削刀具磨损监测

《机械科学与技术》

2024

Hole-exit defect formation during traditional and ultrasonic vibration-assisted drilling of C/SiC composites

The International Journal of Advanced Manufacturing Technology

DOI

2024

How does the uncut chip thickness affect the deformation states within the primary shear zone during metal cutting?

International journal of machine tools & manufacture

DOI

2024

Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures

Metals

DOI

2024

Integrating textured tools and diverse lubricooling approaches in machining performance of Ti and Ni-base alloys – a comprehensive review

Machining science and technology

DOI

2024

Intrinsic and post-hoc XAI approaches for fingerprint identification and response prediction in smart manufacturing processes

Journal of Intelligent Manufacturing

DOI

2024

Effect of plastic deformation of particle and substrate on metallurgical bonding during cold spraying

Materials letters (General ed.)

DOI

2024

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Diamond and related materials

DOI

2024

Investigation of Surface Integrity of Conical Hole in Laser Polishing 440C Stainless Steel

Metals

DOI

2024

Femtosecond laser precision machining of carbon film based on aramid paper substrate

Journal of Manufacturing Processes

DOI

2024

In-situ test of full field deformation and chip formation mechanism during machining of Ti2AlNb intermetallic with digital image correlation method

CIRP - Journal of Manufacturing Science and Technology

DOI

2024

Polytypic transformation behavior from 4H-SiC to 3C-SiC during high-speed scratching of single crystalline silicon carbide

Materials letters (General ed.)

DOI

2024

Surface Integrity Analysis of Si3N4 Under cryogenic assisted Femtosecond Laser Ablation

Ceramics International

DOI

2024

An interpretable thread quality classification model for real-time inspection of tapping process

Measurement

DOI

2024

Debonding Fiber Damage Mechanism Modelling for Machining Damage Inhibition During Rotary Ultrasonic Face Grinding SiO2f/SiO2

Journal of manufacturing science and engineering

DOI

2024

Investigation on multi-pulse femtosecond laser scribing of copper: Analysis of ablation grooves development and modeling modification

Materials & Design

DOI

2024

Chip breakage assisted by pulsed high-pressure jet during continuous cylindrical turning 42CrMo steel

Journal of Manufacturing Processes

DOI

2024

A novel analytical model for predicting ploughing effect on machined wall surface topography considering tool wear during slot milling process

Journal of Manufacturing Processes

DOI

2024

Fatigue performance of Ti6Al4V alloy treated with laser-assisted burnishing

International Journal of Fatigue

DOI

2024

Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC

Micromachines

DOI

2023

[Review] A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions during machining process

Journal Of Manufacturing Systems，Vol. 700

DOI

2023

微量润滑方式对车削42CrMo钢断屑效果的影响分析

《工具技术》

2023

燃油微喷嘴加工质量对雾化特性的影响及工艺优化

《航空发动机》

2023

Ti2AlNb切削切屑形成过程近场动力学仿真及试验研究

《航空制造技术》

2023

高压射流对42CrMo钢车削断屑性能的实验研究

《工具技术》

2023

Effect of Coating Thickness on the Bond Strength of Cold-Sprayed Ni-Based cBN Coating on 42CrMo Substrate

Journal of thermal spray technology (Print)

DOI

2023

Numerical analysis of residual stresses induced by cold spray fabricating cBN-reinforced Ni matrix composites

Surface & Coatings Technology

DOI

2023

Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process

Journal of Manufacturing Processes

DOI

2023

An overview on state-of-art of micromixer designs, characteristics and applications.

Analytica Chimica Acta

DOI

2023

Strain rate effect on material deformation and removal behavior during high speed scratching of 4H-SiC

Tribology International

DOI

2023

Micro/nano manufacturing aircraft surface with anti-icing and deicing performances: An overview

Nanotechnology Reviews

DOI

2023

Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

Micromachines

DOI

2023

Synthesis of Cu2O Nanoparticles by Ellipse Curve Micromixer

ACS Omega

DOI

2023

Numerical Prediction of Surface Morphology and Roughness in Rotary Ultrasonic Face Grinding SiO2f/SiO2 Composite

Journal of Materials Research and Technology

DOI

2023

Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with wear-resistance and anti-corrosion properties

Optics & Laser Technology

DOI

2023

A divide and conquer approach for machined surface topography reconstruction in peripheral milling inconel 718

Surface Topography Metrology and Properties

DOI

2023

Progressive mapping surface integrity and multi-objective optimizing surface quality of machining Ti-6Al-4V based novel tool failure criterion

CIRP - Journal of Manufacturing Science and Technology

DOI

2023

Curing behaviors and mechanical properties of SiC-whisker-reinforced alumina ceramics fabricated with digital light processing

Journal of Materials Research and Technology

DOI

2023

Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching process for drag reduction

Applications of Surface Science

DOI

2023

Precise patterning of carbon films on Polyethylene Terephthalate Polymer substrates using femtosecond lasers

Applications of Surface Science

DOI

2023

Response prediction of cantilever plates via mode superposition method and combination method of beam functions

Mechanical systems and signal processing

DOI

2023

Numerical simulation and experimental study of femtosecond laser ablation of copper: A two-temperature model with temperature-dependent properties and multiple phase transitions

Optics & Laser Technology

DOI

2022

Effect of Ball Burnishing Pressure on Surface Roughness by Low Plasticity Burnishing Inconel 718 Pre-Turned Surface

Materials

DOI

2022

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Materials

DOI

2022

Multi-scale modeling method for polycrystalline materials considering grain boundary misorientation angle

Materials & Design

DOI

2022

Heat transfer enhancement with surface-active thermal conductive media coating during orthogonal cutting Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effects of sidewall roughness on mixing performance of zigzag microchannels

Chemical Engineering and Processing

DOI

2022

A machine learning-based framework for automatic identification of process and product fingerprints for smart manufacturing systems

Journal of Manufacturing Processes

DOI

2022

Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effect of workpiece work hardening on machined surface topography generated in two-step milling process

Journal of Manufacturing Processes

DOI

2022

Machining Distortion for Thin-Walled Superalloy GH4169 Caused by Residual Stress and Manufacturing Sequences

Metals

DOI

2022

Modelling and prediction of surface topography on machined slot side wall with single-pass end milling

The International Journal of Advanced Manufacturing Technology

DOI

2022

Formation mechanism of superhydrophobicity of stainless steel by laser-assisted decomposition of stearic acid and its corrosion resistance

Optics & Laser Technology

DOI

2022

Mechanism of laser-chemical process to remove of oxide layer and formation of periodic microstructures for drag reduction

Surfaces and Interfaces

DOI

2022

Investigation of mechanism and surface morphology on the femtosecond laser ablation of silicon nitride under different auxiliary processing environments

Ceramics International

DOI

2022

Editorial for the Special Issue on Ultra Precision Technologies for Micromachining, Volume II

Micromachines

DOI

2022

Effects of chevron micro-textures on tribological and lubricating performance of cylinder block/valve plate interface in axial piston pumps

Journal of tribology

DOI

2022

Improving thermal conductivity of Inconel 718 through thermoelectric coupling to reduce cutting temperature

Journal of Materials Research and Technology

DOI

2022

Osteogenic and antibacterial ability of micro-nano structures coated with ZnO on Ti-6Al-4V implant fabricated by two-step laser processing

Journal of Materials Science & Technology

DOI

2022

Vortices degradation and periodical variation in spiral micromixers with various spiral structures

International Journal of Heat and Mass Transfer

DOI

2022

Prediction Modelling of Cutting Force in Rotary Ultrasonic End Grinding 2.5D Woven SiO2f/SiO2 Ceramic Matrix Composite

Composite structures

DOI

2022

Effects of process parameters on periodic impact force exerting on cutting tool in ultrasonic vibration-assisted oblique turning

Advances in Manufacturing

DOI

2022

Optimizing amplitude to improve machined surface quality in longitudinal ultrasonic vibration-assisted side milling 2.5D C/SiC composites

Composite structures

DOI

2021

玻璃材料激光加工技术的研究进展

《激光技术》

2021

微型喷嘴的雾化性能及加工技术研究进展

《工具技术》

2021

Numerical prediction and experimental investigation of residual stresses in sequential milling of GH4169 considering initial stress effect

The International Journal of Advanced Manufacturing Technology

DOI

2021

Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review

International journal of machine tools & manufacture

DOI

2021

Tribological performance of multi-scale micro-textured H62 brass surface fabricated by micro-milling and wet micro-blasting

Journal of tribology

DOI

2021

Optimisation of Planning Parameters for Machining Blade Electrode Micro-Fillet with Scallop Height Modelling

Micromachines

DOI

2021

Preparation of superhydrophobic surface by laser ablation-chemical etching process on stainless steel

Sixteenth National Conference on Laser Technology and Optoelectronics

DOI

2021

Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under various tool wear morphologies

DOI

2021

Biocompability evaluation of micro textures coated with zinc oxide on Ti-6Al-4V treated by nanosecond laser

DOI

2021

A cost-effective serpentine micromixer utilizing ellipse curve.

Analytica Chimica Acta

DOI

2020

基于响应曲面法的NOMEX蜂窝高速铣削参数优化

《工具技术》

2020

Manufacturing of anti-fogging super-hydrophilic microstructures on glass by nanosecond laser

DOI

2020

On-machine focus variation measurement for micro-scale hybrid surface texture machining

The International Journal of Advanced Manufacturing Technology

DOI

2020

Acceleration feedback control for enhancing dynamic stiffness of fast tool servo system considering the sensor imperfections

DOI

2020

Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review

The International Journal of Advanced Manufacturing Technology

DOI

2020

Tool wear induced modifications of plastic flow and deformed material depth in new generated surfaces during turning Ti-6Al-4V

DOI

2020

Analytical Prediction and Experimental Investigation of Burnishing Force in Rotary Ultrasonic Roller Burnishing Titanium Alloy Ti–6Al–4V

Journal of manufacturing science and engineering

DOI

2020

Laser-assisted grinding of reaction-bonded SiC

Journal of Micromanufacturing

DOI

2020

Femtosecond Laser Processing of AlN Ceramics for Gradient Wettability Control

ECS Journal of Solid State Science and Technology

DOI

2019

基于纤维增强复合材料的超声振动辅助加工技术综述

《表面技术》

2019

A single-step fabrication approach for development of antimicrobial surfaces

Journal of Materials Processing Technology

DOI

2019

Fundamental understanding of the deformation mechanism and corresponding behavior of RB-SiC ceramics subjected to nano-scratch in ambient temperature

Applications of Surface Science

DOI

2019

A hybrid laser ablation and chemical etching process for manufacturing nature-inspired anisotropic superhydrophobic structures

2019

Dynamic behaviours of water droplets impacting on laser ablated surfaces

Colloids and Surfaces A: Physicochemical and Engineering Aspects

DOI

2019

Modelling and Simulation of Cutting Process by Smoothed Particle Hydrodynamics (SPH): A Review

International Conference on Automation and Computing

DOI

2019

A Sequential Process for Manufacturing Nature-Inspired Anisotropic Superhydrophobic Structures on AISI 316L Stainless Steel

Nanomanufacturing and Metrology

DOI

2019

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

2019

Product and Process Fingerprint for Nanosecond Pulsed Laser Ablated Superhydrophobic Surface

Micromachines

DOI

2019

Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Materials & Design (1980-2015)

DOI

2019

Material removal mode and friction behaviour of RB-SiC ceramics during scratching at elevated temperatures

Journal of the European Ceramic Society

DOI

2019

Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization

Journal of the European Ceramic Society

DOI

2019

Dynamics stiffness enhancement of fast tool servo by acceleration feedback

2019

Toolpath Interpolation and Smoothing for Computer Numerical Control Machining of Freeform Surfaces: A Review

International Journal of Automation and Computing

DOI

2018

A New Grinding Force Model for Micro Grinding RB-SiC Ceramic with Grinding Wheel Topography as an Input

Micromachines

DOI

2018

Introduction to Hybrid Machining Technology

DOI

2018

Simulation Study of Dynamic Behaviour of Water Droplet on Laser Machined Surface

DOI

2018

A real-time interpolator for parametric curves

DOI

2018

Superhydrophobicity of microstructured surfaces on zirconia by nanosecond pulsed laser

Journal of Micromanufacturing

DOI

2018

Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser

DOI

2017

Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing

DOI

2017

Effects of dimensional size and surface roughness on service performance for a micro Laval nozzle

DOI

2017

Fabrication of hydrophobic structures by nanosecond pulse laser

DOI

2017

Tray with skidproof antibacterial functional microstructure

2017

Frictional characteristic of micro structures for wooden pallets

2017

Hydrophobicity of pyramid structures fabricated by micro milling

2016

镍基合金Inconel 718薄壁件铣削加工数控程序和切削参数优化

《机床与液压》

2016

微小喷嘴的设计加工及推力性能研究

《山东大学》

2016

基于Fluent多相流液压滑阀阀芯摩擦力仿真分析

《机床与液压》

2016

Influence of machined surface roughness on thrust performance of micro-nozzle manufactured by micro-milling

DOI

2016

Construction of a bioactive surface with micro/nano-topography on titanium alloy by micro-milling and alkali-hydrothermal treatment

DOI

2016

Optimization of Cutting Parameters and Burrs Control with PMMA Coating in Micro-Milling Titanium Alloys

DOI

2016

Characterisation of thrust performance of micro-nozzle machined by micro end-milling

2015

微细铣削加工中抑制微毛刺生成的新方法

《工具技术》

2015

基于最小吉布斯自由能的疏水表面接触角模型

《山东大学学报(工学版)》

2015

Residual surface topology modeling and simulation analysis for micro-machined nozzle

International Journal of Precision Engineering and Manufacturing

DOI

2015

Deformation control in micro-milling of thin-walled structures

The International Journal of Advanced Manufacturing Technology

DOI

2015

Burr Controlling in Micro Milling with Supporting Material Method

DOI

2015

Optimization of machining parameters for micro-machining nozzle based on characteristics of surface roughness

The International Journal of Advanced Manufacturing Technology

DOI

2015

Fluid mechanics of internal flow with friction and cutting strategies for micronozzles

DOI

2014

基于CFD的微型拉伐尔喷嘴选型与扩张段长度仿真优化研究

《工程科学与技术》

2014

Indexable type inner-cooling milling cutter capable of producing supersonic speed low temperature airflow

2014

Micro Ball End Milling of Nickel-Based Alloy for Laval Nozzle

DOI

2014

A cryogenic gas stream of supersonic generating indexable milling the cooled

2012

Special clamp for micro-milling blank

2026

Microstructures Effect on Mechanical Properties of Laser-Ablated 316L Stainless Steel: A Predictive Modeling Approach

SSRN Electronic Journal

DOI

2025

Optimization of Geometric Parameters in Moon Texturing for Enhanced Tribological Performance of AISI 5115 Steel

SSRN Electronic Journal

DOI