倪荣刚｜青岛大学｜学者主页

2026

Generalized INFORM Method for Low-Speed Position Sensorless Control of PMSM Using Single Current Sampling

Zeyu Han, Ronggang Ni

IEEE transactions on power electronics

DOI

2025

异极双气隙永磁电动机磁路与耦合特性分析

韩思雨，林玉昆，邓晴文，倪荣刚

《实验室研究与探索》

DOI

2025

High Precision Sensorless Control of Rotor Mechanical Position Based on Cross Correction of Dual Air Gap Information

Yukun Lin, Ronggang Ni, Shengmin Yang, Qingwen Deng

CES Transactions on Electrical Machines and Systems

DOI

2025

Optimization Design of a Five-Phase IPMSM Designed for Third-Harmonic Injection

Yong Zhao, Ronggang Ni, Helong Wang, Tong Chen

2025 IEEE 12th International Symposium on Sensorless Control for Electrical Drives (SLED)

DOI

2025

Adaptive Parameter Tuning Methodology for Enhanced PMSM Parameter Estimation via Modified RLS

Qian Zhang, Ronggang Ni, Xingjie Han

2025 8th International Conference on Power and Energy Applications (ICPEA)

DOI

2024

Position Sensorless Control of Multiphase PMSM Based on Harmonic Back-EMF Observation

Shuo Wang, Ronggang Ni, Xiaofei Liu, Lesan Wang, Yongfu Wang, Zeyu Han

2024 IEEE 7th International Electrical and Energy Conference (CIEEC)

DOI

2024

Phase Current Reconstruction of Five Phase Open-Winding Permanent Magnet Synchronous Machine Using Single DC Bus Current Sensor

Yongfu Wang, Ronggang Ni, Shuo Wang, Zeyu Han, Yukun Lin

Vehicle Power and Propulsion Conference

DOI

2023

基于匝数气隙双分段的改进绕组函数解析分析方法

倪荣刚，蔡亚倩，韩思雨，赵咏

《电气工程学报》

2023

Implementation of Two-Dimensional Finite Element Analysis Method in Axial Flux Permanent Magnet Motor

Yi-Chen Liu, Ronggang Ni, Yong Zhao, Si-Yu Han

International Conference on Electrical Machines and Systems

DOI

2023

Modified Approach to Inductance Calculation of Variable Reluctance Resolver Based on Segmented Winding Function Method

Yaqian Cai, Ronggang Ni, Wenyin Zhu, Yichen Liu

IEEE Transactions on Industry Applications

DOI

2022

Generalized INFORM Method with Variable Modulation Frequency for High Dynamic Low Speed Sensorless Control of PMSM

Xiangzhe Meng, Wenyin Zhu, Ronggang Ni

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2022

Position Estimation Error Correction Strategy Based on Dual-Gap Dual-Pole Composite Machine

Shengming Yang, Helong Wang, Ronggang Ni

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2022

Dual-Pole Dual-Stator Permanent Magnet Synchronous Machine for Mechanical Rotor Position Estimation in Full-Speed Range

Kunze He, Ronggang Ni, Caiya Qian

International Conference on Power and Energy Applications (ICPEA)

DOI

2022

Calculation of Inductance Parameters of Variable Reluctance Resolver Based on Modified Winding Function Method

Yaqian Cai, Wenyin Zhu, Yichen Liu, Ronggang Ni

IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific)

DOI

2022

Novel Dead-Time Compensation Strategy for Voltage Integrity Based on Complete Switching State Analysis

Hongtao Fang, Hengdong Cui, Ronggang Ni

IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific)

DOI

2021

A Study on Position Estimation Error in Sensorless Control of PMSM Based on Back EMF Observation Method

Tao Jiang, Ronggang Ni, Shizhuang Gu, Gaojie Wang

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2021

Position Sensorless Control of PMSMs Using Improved INFORM Method with a Single Current Sensor at Low Speed

Gaojie Wang, Ronggang Ni, Tao Jiang, Shizhuang Gu

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2021

Improved Analytical Analysis of Novel Integrated Variable Reluctance Resolver for Compact Machine Topology

Ronggang Ni, Yaqian Cai, Shizhuang Gu, Shuxin Nie, Xinzhen Wu

IEEE Transactions on Industrial Electronics

DOI

2021

Torque Optimization Control of Dual-Gap Dual-Pole Composite Machine for High Efficiency and High Dynamic Performance

Yuming Fang, Ronggang Ni, Tao Jiang

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2021

Research on the Influence of Tooth-Tips Magnetic Saturation on Cogging Torque of Permanent Magnet Synchronous Machine

Shizhuang Gu, Ronggang Ni, Tao Jiang, Gaojie Wang

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2021

Dual-Gap Dual-Pole Composite Machine for Mechanical Rotor Position Estimation

Ronggang Ni, Shizhuang Gu, Shuxin Nie, Frede Blaabjerg, Xinzhen Wu, Dianguo Xu

IEEE Transactions on Power Electronics

DOI

2020

矢量控制永磁同步电机的转矩脉动抑制研究

孙萍，吴新振，倪荣刚

《电气自动化》

2020

电机数字控制系统高精度转子速度检测方法研究

韩振珍，吴新振，倪荣刚

《制造业自动化》

2019

基于两种自适应算法对比下的PMSM矢量控制电流环优化

孙萍，吴新振，倪荣刚

《微电机》

DOI

2019

A Study of RLS Adaptive Filter Algorithm in Current Loop Noise Suppression of PMSM Vector Control System

Ping Bo Sun, Xinzhen Wu, Ronggang Ni, Shuxin Nie

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2019

Design of Novel Variable Reluctance Resolver with Outer Rotor

Shuxin Nie, Ronggang Ni, Yawei Wu, Jingze Li, Ji Chen

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2019

A Novel Differential Estimation Method of Rotor Displacement for Active Magnetic Bearings

Jie Yu, Xinzhen Wu, Yuhao Zhang, Jiankun Li, Ronggang Ni

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2019

Fault-tolerant Control of a 15-phase Induction Machine with Non-sinusoidal Supply under Open-circuited Fault Conditions

Xiaoqin Zheng, Xinzhen Wu, Xinqiang Yi, Haitao Liu, Ronggang Ni

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2019

Initial Position Detection of Permanent Magnet Synchronous Machines with Self-Tuning Extended State Observer

Yawei Wu, Yifan Cui, Ronggang Ni, Shuxin Nie, Xinzhen Wu

International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia)

DOI

2017

低效感应电机永磁化再制造及控制技术研究

倪荣刚

《哈尔滨工业大学》

2016

基于自适应陷波滤波器的内置式永磁电机转子位置观测方法

张国强，王高林，徐殿国，付炎，倪荣刚

《中国电机工程学报》

2016

基于自适应线性神经元滤波的内置式永磁电机转子位置观测器

张国强，王高林，倪荣刚，徐进，曲立志，徐殿国

《电工技术学报》

2012

轴向磁场永磁同步轮毂电机研究

倪荣刚

《哈尔滨工业大学》

倪荣刚

精选作品

期刊论文

Generalized INFORM Method for Low-Speed Position Sensorless Control of PMSM Using Single Current Sampling

异极双气隙永磁电动机磁路与耦合特性分析

High Precision Sensorless Control of Rotor Mechanical Position Based on Cross Correction of Dual Air Gap Information

Optimization Design of a Five-Phase IPMSM Designed for Third-Harmonic Injection

Adaptive Parameter Tuning Methodology for Enhanced PMSM Parameter Estimation via Modified RLS

Position Sensorless Control of Multiphase PMSM Based on Harmonic Back-EMF Observation

Phase Current Reconstruction of Five Phase Open-Winding Permanent Magnet Synchronous Machine Using Single DC Bus Current Sensor

基于匝数气隙双分段的改进绕组函数解析分析方法

Implementation of Two-Dimensional Finite Element Analysis Method in Axial Flux Permanent Magnet Motor

Modified Approach to Inductance Calculation of Variable Reluctance Resolver Based on Segmented Winding Function Method

Generalized INFORM Method with Variable Modulation Frequency for High Dynamic Low Speed Sensorless Control of PMSM

Position Estimation Error Correction Strategy Based on Dual-Gap Dual-Pole Composite Machine

Dual-Pole Dual-Stator Permanent Magnet Synchronous Machine for Mechanical Rotor Position Estimation in Full-Speed Range

Calculation of Inductance Parameters of Variable Reluctance Resolver Based on Modified Winding Function Method

Novel Dead-Time Compensation Strategy for Voltage Integrity Based on Complete Switching State Analysis

A Study on Position Estimation Error in Sensorless Control of PMSM Based on Back EMF Observation Method

Position Sensorless Control of PMSMs Using Improved INFORM Method with a Single Current Sensor at Low Speed

Improved Analytical Analysis of Novel Integrated Variable Reluctance Resolver for Compact Machine Topology

Torque Optimization Control of Dual-Gap Dual-Pole Composite Machine for High Efficiency and High Dynamic Performance

Research on the Influence of Tooth-Tips Magnetic Saturation on Cogging Torque of Permanent Magnet Synchronous Machine

Dual-Gap Dual-Pole Composite Machine for Mechanical Rotor Position Estimation

矢量控制永磁同步电机的转矩脉动抑制研究

电机数字控制系统高精度转子速度检测方法研究

基于两种自适应算法对比下的PMSM矢量控制电流环优化

A Study of RLS Adaptive Filter Algorithm in Current Loop Noise Suppression of PMSM Vector Control System

Design of Novel Variable Reluctance Resolver with Outer Rotor

A Novel Differential Estimation Method of Rotor Displacement for Active Magnetic Bearings

Fault-tolerant Control of a 15-phase Induction Machine with Non-sinusoidal Supply under Open-circuited Fault Conditions

Initial Position Detection of Permanent Magnet Synchronous Machines with Self-Tuning Extended State Observer

低效感应电机永磁化再制造及控制技术研究

基于自适应陷波滤波器的内置式永磁电机转子位置观测方法

基于自适应线性神经元滤波的内置式永磁电机转子位置观测器

轴向磁场永磁同步轮毂电机研究

研究方向