祝银海

2026

Automated co-design of high-performance thermodynamic cycles via graph-based hierarchical reinforcement learning

arXiv.org

DOI

2026

Deposition–resuspension dynamics of unmelted particles on a film-cooled wall in a rotating frame

The Physics of Fluids

DOI

2026

Experimental and numerical study of particle resuspension on turbine surface with film cooling

Progress in nuclear energy (New series)

DOI

2026

Study on control strategy optimization and performance analysis of a PV/T-coupled transcritical CO2 heat pump system with ejector and vapor injection based on environmental mode switching

Energy Conversion and Management

DOI

2026

Performance analysis and multi-objective optimization of PV/T coupled transcritical CO2 heat pump under wide temperature range conditions

Energy

DOI

2026

A novel TPV-Brayton hybrid system for hypersonic vehicles: efficient conversion and utilization of waste heat to power

Energy Conversion and Management

DOI

2026

The influence of an internal heat exchanger in CO2 heat pump systems: Experimental evaluation and a selection methodology

Energy Conversion and Management

DOI

2026

Experimental investigation of supercritical CO2 film cooling under supersonic mainstream conditions

International Journal of Heat and Mass Transfer

DOI

2026

Mechanism and Model of Film Cooling with Multi-Row Discrete Holes in Transonic Mainstream

Journal of Thermal Science

DOI

2026

Online measurement of the surface morphology of supercritical n-decane pyrolytic coke using chromatic confocal technology

Fuel

DOI

2025

冲压发动机碳氢燃料再生冷却研究进展

《工程热物理学报》

2025

宽温域R134a/CO2复叠式空气源热泵系统性能分析研究

《天津大学学报(自然科学与工程技术版)》

2025

基于超临界CO2布雷顿循环的飞行器热电转换系统动态仿真与瞬态特性分析

《工程热物理学报》

2025

跨临界CO2热泵循环优化及最高制热温度研究

《工程热物理学报》

2025

Performance analysis and design optimization of a supercritical CO2 Brayton cycle cooling and power generation system coupled with a scramjet

Applied Energy

DOI

2025

Modeling and optimization of operational strategy for a solar-assisted transcritical CO2 heat pump system

Energy Conversion and Management

DOI

2025

Control-oriented modeling and dynamic behavior analysis of a solid oxide electrolysis cell hydrogen production system

Fuel

DOI

2025

Cooling and power generation performance evaluation of thermophotovoltaic system for hypersonic vehicle engines

Energy Conversion and Management

DOI

2025

Off-design performance analysis of a supercritical carbon dioxide Brayton cycle coupled with a scramjet based on deep learning method

Energy

DOI

2025

An investigation of the long-term deposition of graphite dust particles on turbine blades by mesh-deformation method

Progress in nuclear energy (New series)

DOI

2025

Parameter analysis and performance improvement of wound tube gas cooler in transcritical CO2 heat pumps

Applied Thermal Engineering

DOI

2025

Modeling and performance analysis on an integrated system combining sCO2 Brayton cycle with leakage feedback utilizing a heat pump or direct compression

Journal of Engineering For Gas Turbines and Power

DOI

2025

Optimization of trans-critical CO2 high-temperature heat pump cycle and study of maximum heating temperature

International journal of refrigeration

DOI

2025

Optimal design and aerodynamic performance analysis of a radial inflow turbine in the helium‒xenon mixture Brayton cycle

Aerospace Science and Technology

DOI

2025

Mechanism and model of n-decane pyrolytic coking based on the coupling of surface mass transfer and chemical reactions

Chemical Engineering Journal

DOI

2024

Study of the behavior of dust particles in helium turbines considering the effects of particle deposition and resuspension

Powder Technology

DOI

2024

A numerical study of graphite particle motion on a helium turbine wall in a high-temperature gas-cooled reactor system

Nuclear Engineering and Design

DOI

2024

Dynamic simulation and analysis of transient characteristics of a thermal-to-electrical conversion system based on supercritical CO2 Brayton cycle in hypersonic vehicles

Applied Energy

DOI

2024

Modeling and experimental research on adjustable ejector in fuel cell gas circulation system

Applied Thermal Engineering

DOI

2024

Shape optimization and flow irreversibility mechanism analysis of normal temperature, high temperature and wet stream ejectors

Applied Thermal Engineering

DOI

2024

Oxidative and pyrolytic coking characteristics of supercritical-pressure n-decane and its influence mechanism on heat transfer

Fuel

DOI

2023

燃料电池中气体循环可调型引射器建模与实验研究

《工程热物理学报》

2023

燃料电池阳极排气系统引射增压循环方案实验研究

《工程热物理学报》

2023

超声速气流中扩张孔横向射流冷却特性研究

《工程热物理学报》

2023

Review on heat-to-power conversion technologies for vehicles

Chinese Journal of Aeronautics

DOI

2023

Fuel ejector design and optimization for solid oxide fuel cells using response surface methodology and multi-objective genetic algorithm

Applied Thermal Engineering

DOI

2023

Large eddy simulation of film cooling flow from diffusion slot hole with crossflow coolant configuration

Physics of Fluids

DOI

2022

基于移动边界法的超临界流体换热器动态模型

《工程热物理学报》

2022

Single-stage or multi-stage compression: which is better for sorption compressors?

Cryogenics (Guildford)

DOI

2022

Large eddy simulation of highly compressible film cooling in transonic crossflow

International Journal of Heat and Mass Transfer

DOI

2022

An experimental investigation of supersonic combustion of cracked JP-10

Acta Astronautica

DOI

2022

Analysis of a novel combined cooling and power system by integrating of supercritical CO2 Brayton cycle and transcritical ejector refrigeration cycle

Energy Conversion and Management

DOI

2022

Large Eddy Simulation of Energy Transport in Highly Compressible Transverse Jets

DOI

2022

Heat transfer characteristics in a trailing-edge slot cooling surface with outward protrusions

Experimental Heat Transfer

DOI

2022

Dynamic simulation model with virtual interfaces of supercritical working fluid heat exchanger based on moving boundary method

Energy

DOI

2022

Online measurement of mean residence time of supercritical-pressure fluid with/without chemical reaction in pipe flow: A particle image statistics method considering optical distortion and radial uneven distribution of tracer particles

Chemical Engineering Science

DOI

2022

Quasi-two-dimensional ejector model for anode gas recirculation fuel cell systems

Energy Conversion and Management

DOI

2021

高超声速飞行器发动机热防护与发电一体化系统

《航空动力学报》

DOI

2021

超临界CO2布雷登循环热电联供系统多目标优化

《工程热物理学报》

2021

航天飞行器热防护相变发汗冷却研究进展

《清华大学学报(自然科学版)》

DOI

2021

A numerical study of segmented cooling-stream injection in supersonic film cooling

Chinese Journal of Aeronautics

DOI

2021

Experimental and theoretical modeling of the effects of pressure and secondary reactions on pyrolysis of JP-10 at supercritical pressures

Fuel

DOI

2021

A Numerical Study of Supersonic Film Cooling With Discrete Holes

DOI

2021

An innovative design for measuring the enhanced mixing effect of a shock wave on supersonic film cooling

International Communications in Heat and Mass Transfer

DOI

2021

Influence of shock wave impinging region on supersonic film cooling

Chinese Journal of Aeronautics

DOI

2020

超临界压力正癸烷旋转通道内对流换热实验研究

《工程热物理学报》

2020

A novel global reaction modeling approach considering the effects of pressure on pyrolysis of n-decane at supercritical pressures

Fuel

DOI

2020

Experimental and modeling studies of thermally-driven subcritical and transcritical ejector refrigeration systems

Energy Conversion and Management

DOI

2020

Multi-objective optimization of combined cooling, heating, and power systems with supercritical CO2 recompression Brayton cycle

Applied Energy

DOI

2020

Transpiration cooling with bio-inspired structured surfaces

Bioinspiration & Biomimetics

DOI

2019

超临界CO2发电和跨临界喷射制冷复合系统研究

《工程热物理学报》

2019

旋转条件下超临界压力正癸烷径向入流时的对流换热

《推进技术》

DOI

2019

超声速主流平板相变发汗冷却实验研究

《推进技术》

DOI

2019

Self-pumping transpiration cooling with a protective porous armor

Applied Thermal Engineering

DOI

2019

Investigation of flow and heat transfer instabilities and oscillation inhibition of n-decane at supercritical pressure in vertical pipe

Applied Thermal Engineering

DOI

2019

Differential Global Reaction Model with Variable Stoichiometric Coefficients for Thermal Cracking of n-Decane at Supercritical Pressures

Energy & Fuels

DOI

2019

Self-pumping transpiration cooling with phase change for sintered porous plates

Applied Thermal Engineering

DOI

2019

Experimental Investigation of Convective Heat Transfer of Supercritical Pressure Hydrocarbon Fuel in a Horizontal Section of a Rotating U-Duct

ASME Journal of Heat and Mass Transfer

DOI

2019

INFLUENCE OF COOLANT PRESSURE RATIO AND SHOCK WAVE ON SUPERSONIC FILM COOLING WITH TWO ROWS OF DISCRETE HOLES

The Proceedings of the International Conference on Nuclear Engineering (ICONE)

DOI

2018

超临界压力下正癸烷在多孔介质中结焦实验研究

《推进技术》

2018

跨临界CO2热泵高温热水器性能实验研究

《工程热物理学报》

2018

Biomimetic self-pumping transpiration cooling for additive manufactured porous module with tree-like micro-channel

International Journal of Heat and Mass Transfer

DOI

2018

Influence of shock waves on supersonic transpiration cooling

International Journal of Heat and Mass Transfer

DOI

2018

Experimental investigation of convective heat transfer of hydrocarbon fuels at supercritical pressures within rotating centrifugal channel

Applied Thermal Engineering

DOI

2018

Review on active thermal protection and its heat transfer for airbreathing hypersonic vehicles

Chinese Journal of Aeronautics

DOI

2018

Experimental investigation on the performance of transcritical CO2 ejector–expansion heat pump water heater system

Energy Conversion and Management

DOI

2018

Experimental investigation of self-pumping internal transpiration cooling

International Journal of Heat and Mass Transfer

DOI

2018

Thermodynamic optimization of heat transfer process in thermal systems using CO2 as the working fluid based on temperature glide matching

Energy

DOI

2018

Experimental Investigation of Flow Coking and Coke Deposition of Supercritical Hydrocarbon Fuels in Porous Media

Energy & Fuels

DOI

2018

Thermal Cracking and Heat Transfer of Hydrocarbon Fuels at Supercritical Pressures in Vertical Tubes

Heat Transfer Engineering

DOI

2018

Investigation of Inclined Porous Transpiration-Cooled Struts

Journal of Spacecraft and Rockets

DOI

2018

Experimental investigation of the flow and heat transfer instabilities in n-decane at supercritical pressures in a vertical tube

International Journal of Heat and Mass Transfer

DOI

2018

EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER OF SUPERCRITICAL PRESSURE HYDROCARBON FUEL IN A ROTATING CENTRIFUGAL CHANNEL

International Heat Transfer Conference (IHTC)

DOI

2017

超临界压力下竖直圆管内正癸烷对流换热不稳定性实验

《推进技术》

2017

高温主流条件下相变发汗冷却实验研究

《工程热物理学报》

2017

Theoretical model of transcritical CO2 ejector with non-equilibrium phase change correlation

International Journal of Refrigeration

DOI

2017

Comprehensive experimental study on a transcritical CO 2 ejector-expansion refrigeration system

Energy Conversion and Management

DOI

2017

Experimental investigation of biomimetic self-pumping and self-adaptive transpiration cooling

Bioinspiration & Biomimetics

DOI

2017

Experimental Study on Combined Cooling Method for Porous Struts in Supersonic Flow

ASME Journal of Heat and Mass Transfer

DOI

2017

Experimental investigation of transpiration cooling with phase change for sintered porous plates

International Journal of Heat and Mass Transfer

DOI

2017

Investigation of Combined Transpiration and Opposing Jet Cooling of Sintered Metal Porous Struts

Heat Transfer Engineering

DOI

2016

超临界压力下碳氢燃料在竖直圆管内对流换热实验研究

《工程热物理学报》

2016

Experimental investigation of combined transpiration and film cooling for sintered metal porous struts

International Journal of Heat and Mass Transfer

DOI

2016

Inverse Heat Conduction Problem for Estimating Heat Flux on a Triangular Wall

Journal of Thermophysics and Heat Transfer

DOI

2015

碳氢燃料在旋转通道中传热的数值模拟

《工程热物理学报》

2015

旁通型喷嘴喷射器的环隙结构对性能的影响

《工程热物理学报》

2015

超临界压力碳氢燃料瞬态加热响应特性

《化工学报》

2015

超临界压力下RP-3在细圆管内对流换热实验研究

《工程热物理学报》

2015

Experimental investigation of convection heat transfer of n-decane at supercritical pressures in small vertical tubes

International Journal of Heat and Mass Transfer

DOI

2015

INVESTIGATION OF SUPERSONIC TRANSPIRATION COOLING THROUGH SINTERED METAL POROUS FLAT PLATES

Journal of Porous Media

DOI

2014

激波对超音速平板发汗冷却的影响

《工程热物理学报》

2014

超临界压力下正癸烷在微细圆管内对流换热实验研究

《工程热物理学报》

2014

Experimental investigation of full-coverage effusion cooling through perforated flat plates

Applied Thermal Engineering

DOI

2014

Investigation of a Porous Transpiration-Cooled Strut Injector

Journal of Propulsion and Power

DOI

2014

Experimental and analytical studies on the shock wave length in convergent and convergent–divergent nozzle ejectors

Energy Conversion and Management

DOI

2014

Investigation of transpiration cooling for sintered metal porous struts in supersonic flow

Applied Thermal Engineering

DOI

2014

Bypass ejector with an annular cavity in the nozzle wall to increase the entrainment: Experimental and numerical validation

Energy

DOI

2014

Experimental and Numerical Investigations of Supersonic Transpiration Cooling Through Sintered Porous Flat Plates

International Heat Transfer Conference (IHTC)

DOI

2013

冷端边界条件对发汗冷却解析解的影响

《清华大学学报(自然科学版)》

2013

单相液体发汗冷却规律实验

《航空动力学报》

2013

Experimental and Numerical Investigations on n -Decane Thermal Cracking at Supercritical Pressures in a Vertical Tube

Energy & Fuels

DOI

2013

Experimental and numerical investigation of the effect of shock wave characteristics on the ejector performance

International Journal of Refrigeration

DOI

2013

Numerical Simulation of Transpiration Cooling for Sintered Metal Porous Strut of the Scramjet Combustion Chamber

Heat Transfer Engineering

DOI

2012

液体火箭推力室面板发汗冷却与燃烧耦合数值模拟

《工程热物理学报》

2012

液体火箭发动机液氧箱与预冷回路的耦合计算模型

《工程热物理学报》

2012

Injector Head Transpiration Cooling Coupled with Combustion in H2/O2 Subscale Thrust Chamber

Journal of Thermophysics and Heat Transfer

DOI

2011

土壤源跨临界CO2循环热泵系统供暖的实验研究

《工程热物理学报》

2011

Hybrid vapor compression refrigeration system with an integrated ejector cooling cycle

International Journal of Refrigeration

DOI

2011

Geometry optimization study of ejector in anode recirculation solid oxygen fuel cell system

IEEE Conference on Industrial Electronics and Applications (ICIEA)

DOI

2009

基于临界圆的二维喷射器模型构建及流动机理研究

《西安交通大学》

2008

基于制冷剂R141B的喷射器混合模型及其实验验证

《化工学报》

2008

一种新的喷射器模型及其实验验证

《西安交通大学学报》

2006

板翅式换热器翅片通道中流体流动与传热的计算流体力学模拟

《化工学报》

2006

CFD技术在平直和锯齿形板翅式换热器设计中的运用

《家电科技》

2005

低温冷箱中辐射与导热耦合传热的数值模拟

《西安交通大学学报》

2005

一种新型板束结构的板翅式换热器的数值模拟和优化设计

《低温工程》

2005

低温冷箱跑冷损失及其对内部换热器温度分布的影响

《低温工程》

2004

一种计算板翅式换热器二次表面换热的新模型

《西安交通大学学报》

2015

非均匀加热条件下多孔介质内相变发汗冷却的数值模拟研究

《中国力学大会-2015》

2026

An ejector-enhanced R134a refrigeration system with dual evaporators: experimental investigation and industrial validation

SSRN Electronic Journal

DOI

2025

Optimization of the internal heat exchanger and discharge pressure for enhanced performance in transcritical CO2 heat pump systems

SSRN Electronic Journal

DOI

2023

Shape Optimization and Flow Irreversibility Mechanism Analysis of Gas Recirculation Ejectors in Fuel Cells

SSRN Electronic Journal

DOI