吴旺青｜中南大学｜学者主页

2026

Precision Injection‐Compression Molding and Functional Integration of Hollow Microneedle Microfluidic Chips for Minimally Invasive Continuous Health Monitoring

Baishun Zhao, Dimitrios Kontziampasis, Mingyong Zhou, Wangqing Wu, Zhiyu Yang, Bingyan Jiang, Dou Zhang

Small

DOI

2026

Fabrication of polymeric nanostructures with high aspect ratio for cell differentiation

Lei Huang, Yuan Li, Dimitrios Kontziampasis, Wangqing Wu, Bingyan Jiang, Mingyong Zhou

Colloids and Surfaces B Biointerfaces

DOI

2026

Tuning surface microtopography for optimum thermocompression bonding performance: structure, process parameters, and mechanisms on microfluidic chips

Baishun Zhao, Dimitrios Kontziampasis, Zhiyu Yang, Bingyan Jiang, Wangqing Wu, Dou Zhang

Materials & Design

DOI

2025

基于多目标优化PMMA微流控芯片模内热压键合工艺质量协同调控

赵百顺，吴旺青，蒋炳炎，杨志宇

《工程塑料应用》

2025

超声塑化微注塑机立式双曲肘四板式合模机构的数学建模与优化设计

苏伯恒，单志颖，吴旺青

《中南大学学报(自然科学版)》

2025

Construction of polymer micro-scale rheological model considering viscous dissipation heat based on online testing method

Qun Yang, Junjie Liu, Jiazheng Xiong, Baishun Zhao, Wangqing Wu

International Communications in Heat and Mass Transfer

DOI

2025

The filling behavior characteristics, performance and consistency of LDPE in the microscale convergent cavity during the ultrasonic plasticizing micro-injection molding process

Zhiying Shan, Hang Li, Xingbo Qin, Wangqing Wu

Journal of Manufacturing Processes

DOI

2025

Convergent flow characteristics and mechanism of polyethylene melt in high aspect ratio micro cavity: A united-atom molecular dynamics study

Zhiying Shan, Changsheng He, Yanghui Xiang, Enzu Peng, Wangqing Wu

Materials Today Communications

DOI

2025

Ultrasonic plasticizing micro-injection molding of UHMWPE based on new process flow and ultrasonic system structure to improve mechanical properties and process stability

Zhiying Shan, Xingbo Qin, Hang Li, Yanghui Xiang, Wangqing Wu

Ultrasonics Sonochemistry

DOI

2024

Modeling heat generation in polymer–polymer interfaces under ultrasonic vibration: a coupled friction and viscoelastic approach

Wangqing Wu, Changyuan Jia, Bingyan Jiang, Yang Zou

Journal of Thermal Analysis and Calorimetry

DOI

2023

PMMA微流控芯片注射成型多目标优化实验研究

吴旺青，雷益华，单志颖，蒋炳炎

《中南大学学报(自然科学版)》

2023

Transient viscoelastic heating characteristics of polyethene under high frequency hammering during ultrasonic plasticizing

Wangqing Wu, Zhiying Shan, Yuanbao Qiang, Mingyong Zhou

Ultrasonics

DOI

2022

In-line steady shear flow characteristics of polymer melt in rectangular slit cavities during thin-wall/micro injection molding

Wangqing Wu, Baishun Zhao, Fan Mo, Binbin Li, Bingyan Jiang

Materials & Design

DOI

2022

The in-mold thermocompression bonding process of microfluidic chips based on the highly dynamic variotherm technology: Process characteristics

Baishun Zhao, Wangqing Wu, Bingyan Jiang

DOI

2022

A new fuzzy rule based multi-objective optimization method for cross-scale injection molding of protein electrophoresis microfluidic chips

Zhiying Shan, Wangqing Wu, Yihua Lei, Baishun Zhao

Scientific Reports

DOI

2021

聚合物超声塑化速率的量化表征与影响因素

周啸天，吴旺青，魏国猛，蒋炳炎

《中南大学学报(自然科学版)》

2021

A novel method for the quantitative characterization of the simultaneous plasticizing and filling performance in ultrasonic plasticization micro injection molding

Yang Zou, Wangqing Wu, Zhou Xiaotian, Guomeng Wei, Bingyan Jiang

Materials & Design

DOI

2020

原位注射成型树脂体系SK型静态混合过程数值模拟

吴旺青，刘毅，付继先

《工程科学与技术》

2020

Experimental study on viscosity properties of cyclic olefin copolymer (COC) flowing through micro capillary dies

Jin Lu, Yuanbao Qiang, Wangqing Wu, Bingyan Jiang

Polymer Testing

DOI

2020

Effects of the Processing Parameters on the Shear Viscosity of Cyclic Olefin Copolymer Plasticized by Ultrasonic Vibration Energy

Jin Lu, Yuanbao Qiang, Wangqing Wu, Bingyan Jiang

Polymers

DOI

2019

玻纤增强聚丙烯与尼龙66模内混合加工成型实验研究

符亮，蒋炳炎，吴旺青，闵丽萍

《中南大学学报(自然科学版)》

2019

环形对苯二甲酸丁二醇酯与催化剂混合体系的流变性能

吴旺青，刘毅，向阳辉，付继先

《材料工程》

2019

料筒温度对超声塑化微制件充填质量的影响

蒋炳炎，张英平，齐鹏程，邹洋，魏国猛，吴旺青

《中南大学学报(自然科学版)》

2019

Evolution of Interfacial Friction Angle and Contact Area of Polymer Pellets during the Initial Stage of Ultrasonic Plasticization

Bingyan Jiang, Yang Zou, Guomeng Wei, Wangqing Wu

Polymers

DOI

2019

Research on Influencing Factors of the Thermal Contact Resistance in Thin-Wall Injection Molding

L.-Y. Zhu, Wangqing Wu, Lianqiong Jiang, Bingyan Jiang

International Polymer Processing

DOI

2019

Characterization of the Fluidity of the Ultrasonic Plasticized Polymer Melt by Spiral Flow Testing under Micro-Scale

Bingyan Jiang, Yang Zou, Tao Liu, Wangqing Wu

Polymers

DOI

2018

超声塑化工艺参数对聚合物熔体流动性能的影响

蒋炳炎，刘弢，吴旺青，张英平，邹洋，周啸天

《中南大学学报(自然科学版)》

2018

超声塑化对聚合物熔融指数的影响

蒋炳炎，邹洋，刘弢，张英平，吴旺青

《中南大学学报(自然科学版)》

2018

一种新型低分子热塑性树脂体系CBT500/DBTL的界面张力表征

付继先，吴旺青，刘毅，蒋炳炎

《中南大学学报(自然科学版)》

2018

模内混合注塑成型聚丙烯与预制件间界面黏结强度研究

卢一，蒋炳炎，符亮，吴旺青

《中南大学学报(自然科学版)》

2018

薄壁注射成型中聚合物与模具间接触热阻研究

蒋礼，蒋炳炎，吴旺青，朱来余，DRUMMER Dietmar

《中南大学学报(自然科学版)》

2017

超声功率对聚合物超声熔融塑化的影响

蒋炳炎，齐鹏程，张胜，吴旺青，邹洋

《中南大学学报(自然科学版)》

2016

全塑混合成型预置件红外加热装置设计及性能研究

闫东，周洲，吴旺青，蒋炳炎

《塑料工业》

2015

聚合物基复合材料电阻焊接技术研究进展

刘洪波，迪力穆拉提·阿卜力孜，吴旺青，谢磊，段玉岗，李涤尘

《复合材料科学与工程》

2014

Manufacturing and characterization of bipolar fuel cell plate with textile reinforced polymer composites

Bingyan Jiang, N. Stübler, Wangqing Wu, Qingxin Li, Gerhard Ziegmann, Dieter Meiners

Materials & Design (1980-2015)

DOI

2013

A novel process for cost effective manufacturing of fiber metal laminate with textile reinforced pCBT composites and aluminum alloy

Wangqing Wu, Dilmurat Abliz, Bingyan Jiang, Gerhard Ziegmann, Dieter Meiners

Composite Structures

DOI

2013

Influence of textile preforming binder on the thermal and rheological properties of the catalyzed cyclic butylene terephthalate oligomers

Wangqing Wu, Lei Xie, Bingyan Jiang, Gerhard Ziegmann

Composites Part B Engineering

DOI

2013

Simultaneous binding and ex situ toughening concept for textile reinforced pCBT composites: Influence of preforming binders on interlaminar fracture properties

Wangqing Wu, Florian Klunker, Lei Xie, Bingyan Jiang, Gerhard Ziegmann

Composites Part A Applied Science and Manufacturing

DOI

2013

Simultaneous binding and toughening concept for textile reinforced pCBT composites: Manufacturing and flexural properties

Wangqing Wu, Lei Xie, Bingyan Jiang, Gerhard Ziegmann

Composite Structures

DOI

2013

Effect of Compaction and Preforming Parameters on the Compaction Behavior of Bindered Textile Preforms for Automated Composite Manufacturing

Wangqing Wu, Binyan Jiang, Lei Xie, Florian Klunker, S. Aranda, Gerhard Ziegmann

Applied Composite Materials

DOI

2009

高宽比效应对厚壁复合材料固化过程的影响:Ⅰ.数值模拟(英文)

吴旺青，Florian Klunker，David Christian Berg，朱丹，Gerhard Ziegmann，蒋炳炎

《材料工程》

2007

注射成型参数对微结构阵列导光板翘曲量的影响

蒋炳炎，吴旺青，彭华建，罗建华

《光学精密工程》

2007

HDPE微注射成型过程非等温动态结晶模拟

蒋炳炎，吴旺青，翁灿，谢磊

《塑料工业》

2007

微注射成型中聚合物熔融塑化技术

蒋炳炎，吴旺青，胡建良，沈龙江

《工程塑料应用》

2007

数值模拟充填工艺参数对微结构零件充填深度的影响

蒋炳炎，汤美林，吴旺青

《电加工与模具》

2006

微尺度流道中流体流动前沿的喷泉流动仿真

蒋炳炎，谢磊，吴旺青，彭华建

《高分子材料科学与工程》

精选作品

期刊论文

Precision Injection‐Compression Molding and Functional Integration of Hollow Microneedle Microfluidic Chips for Minimally Invasive Continuous Health Monitoring

Fabrication of polymeric nanostructures with high aspect ratio for cell differentiation

Tuning surface microtopography for optimum thermocompression bonding performance: structure, process parameters, and mechanisms on microfluidic chips

基于多目标优化PMMA微流控芯片模内热压键合工艺质量协同调控

超声塑化微注塑机立式双曲肘四板式合模机构的数学建模与优化设计

Construction of polymer micro-scale rheological model considering viscous dissipation heat based on online testing method

The filling behavior characteristics, performance and consistency of LDPE in the microscale convergent cavity during the ultrasonic plasticizing micro-injection molding process

Convergent flow characteristics and mechanism of polyethylene melt in high aspect ratio micro cavity: A united-atom molecular dynamics study

Ultrasonic plasticizing micro-injection molding of UHMWPE based on new process flow and ultrasonic system structure to improve mechanical properties and process stability

Modeling heat generation in polymer–polymer interfaces under ultrasonic vibration: a coupled friction and viscoelastic approach

PMMA微流控芯片注射成型多目标优化实验研究

Transient viscoelastic heating characteristics of polyethene under high frequency hammering during ultrasonic plasticizing

In-line steady shear flow characteristics of polymer melt in rectangular slit cavities during thin-wall/micro injection molding

The in-mold thermocompression bonding process of microfluidic chips based on the highly dynamic variotherm technology: Process characteristics

A new fuzzy rule based multi-objective optimization method for cross-scale injection molding of protein electrophoresis microfluidic chips

聚合物超声塑化速率的量化表征与影响因素

A novel method for the quantitative characterization of the simultaneous plasticizing and filling performance in ultrasonic plasticization micro injection molding

原位注射成型树脂体系SK型静态混合过程数值模拟

Experimental study on viscosity properties of cyclic olefin copolymer (COC) flowing through micro capillary dies

Effects of the Processing Parameters on the Shear Viscosity of Cyclic Olefin Copolymer Plasticized by Ultrasonic Vibration Energy

玻纤增强聚丙烯与尼龙66模内混合加工成型实验研究

环形对苯二甲酸丁二醇酯与催化剂混合体系的流变性能

料筒温度对超声塑化微制件充填质量的影响

Evolution of Interfacial Friction Angle and Contact Area of Polymer Pellets during the Initial Stage of Ultrasonic Plasticization

Research on Influencing Factors of the Thermal Contact Resistance in Thin-Wall Injection Molding

Characterization of the Fluidity of the Ultrasonic Plasticized Polymer Melt by Spiral Flow Testing under Micro-Scale

超声塑化工艺参数对聚合物熔体流动性能的影响

超声塑化对聚合物熔融指数的影响

一种新型低分子热塑性树脂体系CBT500/DBTL的界面张力表征

模内混合注塑成型聚丙烯与预制件间界面黏结强度研究

薄壁注射成型中聚合物与模具间接触热阻研究

超声功率对聚合物超声熔融塑化的影响

全塑混合成型预置件红外加热装置设计及性能研究

聚合物基复合材料电阻焊接技术研究进展

Manufacturing and characterization of bipolar fuel cell plate with textile reinforced polymer composites

A novel process for cost effective manufacturing of fiber metal laminate with textile reinforced pCBT composites and aluminum alloy

Influence of textile preforming binder on the thermal and rheological properties of the catalyzed cyclic butylene terephthalate oligomers

Simultaneous binding and ex situ toughening concept for textile reinforced pCBT composites: Influence of preforming binders on interlaminar fracture properties

Simultaneous binding and toughening concept for textile reinforced pCBT composites: Manufacturing and flexural properties

Effect of Compaction and Preforming Parameters on the Compaction Behavior of Bindered Textile Preforms for Automated Composite Manufacturing

高宽比效应对厚壁复合材料固化过程的影响:Ⅰ.数值模拟(英文)

注射成型参数对微结构阵列导光板翘曲量的影响

HDPE微注射成型过程非等温动态结晶模拟

微注射成型中聚合物熔融塑化技术

数值模拟充填工艺参数对微结构零件充填深度的影响

微尺度流道中流体流动前沿的喷泉流动仿真

会议论文

Stamp forming of commingled GF/PP fabric with vacuum technology

研究方向