百晓学者学者目录

柳百成

清华大学机械工程系先进成形制造教育部重点实验室

个人简介

柳百成，清华大学机械工程系教授、博士生导师，先进成形制造教育部重点实验室顾问。铸造工艺与设备专家，1955年毕业于清华大学，工学学士学位。在国内较早提出用计算机技术改造传统铸造行业，在铸造过程宏观及微观模拟仿真领域做出重要贡献。1999年当选为中国工程院院士。

精选作品

期刊论文

  1. 冯秋水，夏鹄翔，许庆彦，柳百成（2023）. 镍基单晶高温合金γ′相筏化组织三维相场模拟研究. 《特种铸造及有色合金》.
  2. Huxiang Xia, Yanhong Yang, Qiushui Feng, Qingyan Xu, Hongbiao Dong, Baicheng Liu (2022). Generation mechanism and motion behavior of sliver defect in single crystal Ni-based superalloy. Journal of Material Science and Technology.DOI
  3. Cong Yang, Huxiang Xia, Qingyan Xu, Baicheng Liu (2021). Multiphase-field simulation of the solution heat treatment process in a Ni-based superalloy. Computational Materials Science.DOI
  4. 闫学伟，许庆彦，杨雪梅，张海军，文振华，柳百成（2020）. 单晶叶片定向凝固过程雀斑缺陷数值模拟研究. 《特种铸造及有色合金》.DOI
  5. Xuewei Yan, Qingyan Xu, Quanwei Liu, Guoqiang Tian, Zhenhua Wen, Baicheng Liu (2020). Dendrite growth in nickel-based superalloy with in-situ observation by high temperature confocal laser scanning microscopy and numerical simulation. Materials Letters.DOI
  6. Xuewei Yan, Qingyan Xu, Guoqiang Tian, Quanwei Liu, Junxing Hou, Baicheng Liu (2020). Multi-scale modeling of liquid-metal cooling directional solidification and solidification behavior of nickel-based superalloy casting. Journal of Material Science and Technology.DOI
  7. 许庆彦，杨聪，闫学伟，柳百成（2019）. 高温合金涡轮叶片定向凝固过程数值模拟研究进展. 《金属学报》.
  8. 许自霖，钟江伟，苏香林，许庆彦，柳百成（2019）. 单晶高温合金用SiO2基型芯力学性能及本构模型. 《稀有金属材料与工程》.
  9. 闫学伟，郭雄，刘艳领，巩秀芳，许庆彦，柳百成（2019）. 定向凝固过程中镍基高温合金铸件的枝晶生长模拟（英文）. Transactions of Nonferrous Metals Society of China.
  10. 许庆彦，杨聪，柳百成（2019）. 镍基高温合金定向凝固过程枝晶组织相场模拟研究. 《航空制造技术》.DOI
  11. 魏倩，许自霖，许庆彦，柳百成（2019）. 烧结温度对氧化铝基陶瓷型壳显微组织及力学行为的影响. 《航空材料学报》.
  12. 柳百成（2019）. 40年前,我们52人赴美留学. 《中国经济周刊》.
  13. 柳百成（2019）. 创新、强基、智能——建设制造强国. 《智能网联汽车》.
  14. Jian Zhong, Z. Xu, Baicheng LIU, Qingyan Xu, Chengwei Sun, Jiawei Wu (2019). Deformation behavior and constitutive model for high temperature compression of a newly type of Ni3Al‐based superalloy. Materialwissenschaft und Werkstofftechnik.DOI
  15. Cong Yang, Qingyan Xu, Baicheng Liu (2019). Phase‐field–lattice Boltzmann simulation of dendrite growth under natural convection in multicomponent superalloy solidification. Rare Metals.DOI
  16. Cong Yang, Qingyan Xu, Xianglin Su, Baicheng Liu (2019). Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy. Acta Materialia.DOI
  17. Xuewei Yan, Xiong GUO, Yan-ling LIU, Xiufang Gong, Qingyan Xu, Baicheng Liu (2019). Numerical simulation of dendrite growth in Ni-based superalloy casting during directional solidification process. Transactions of Nonferrous Metals Society of China.DOI
  18. Runnan Wang, Qingyan Xu, Baicheng Liu (2019). Simulation and Experimental Study on the Directional Solidification Process of a Single-Crystal Superalloy Plate Casting. Springer proceedings in physics.DOI
  19. Jiangwei Zhong, Pan Tao, Qingyan Xu, Baicheng Liu, Zhijun Ji (2019). Deformation Behavior and Constitutive Model for Isothermal Compression of TC4 Alloy. Springer proceedings in physics.DOI
  20. 闫学伟，王润楠，唐宁，郭雄，马德新，许庆彦，柳百成（2018）. 重燃叶片定向凝固宏/微观数值模拟及实验研究. 《稀有金属材料与工程》.
  21. 沈厚发，陈康欣，柳百成（2018）. 钢锭铸造过程宏观偏析数值模拟. 《金属学报》.
  22. 柳百成，赵广立（2018）. 须“工业强基”支撑智能制造发展. 《中国科学报》.
  23. 柳百成，姚冬琴（2018）. 亲历者柳百成 四十年前,我们52人赴美留学. 《中国经济周刊》.
  24. Cong Yang, Qingyan Xu, Baicheng Liu (2018). Study of dendrite growth with natural convection in superalloy directional solidification via a multiphase-field-lattice Boltzmann model. Computational Materials Science.DOI
  25. Run-nan Wang, Qingyan Xu, Baicheng Liu (2018). A model for simulation of recrystallization microstructure in single‐crystal superalloy. Rare Metals.DOI
  26. Qingyan Xu, Cong Yang, Hang Zhang, Xuewei Yan, Ning Tang, Baicheng Liu (2018). Multiscale Modeling and Simulation of Directional Solidification Process of Ni-Based Superalloy Turbine Blade Casting. Metals.DOI
  27. Zilin Xu, Jiangwei Zhong, Xianglin Su, Qingyan Xu, Baicheng Liu (2018). Microstructure evolution and mechanical behaviors of alumina-based ceramic shell for directional solidification of turbine blades. Journal of Materials Research and Technology.DOI
  28. Runnan Wang, Qingyan Xu, Xiufang Gong, Xianglin Su, Baicheng Liu (2018). Experimental and Numerical Studies on Recrystallization Behavior of Single-Crystal Ni-Base Superalloy. Materials.DOI
  29. Qian Wei, Run-nan Wang, Qingyan Xu, Baicheng Liu (2018). Effects of process parameters on dimensional precision and tensile strength of wax patterns for investment casting by selective laser sintering. China Foundry.DOI
  30. Runnan Wang, Qingyan Xu, Xianglin Su, Zhonglin Li, Baicheng Liu (2018). Influence of gibbosity on recrystallization behavior of single crystal blade casting. Journal of Materials Processing Technology.DOI
  31. Qian Wei, Jiangwei Zhong, Zilin Xu, Qingyan Xu, Baicheng Liu (2018). Microstructure evolution and mechanical properties of ceramic shell moulds for investment casting of turbine blades by selective laser sintering. Ceramics International.DOI
  32. Cong Yang, Qingyan Xu, Baicheng Liu (2018). Primary dendrite spacing selection during directional solidification of multicomponent nickel-based superalloy: multiphase-field study. Journal of Materials Science.DOI
  33. Cong Yang, Qingyan Xu, Baicheng Liu (2018). A high precision extrapolation method in multiphase-field model for simulating dendrite growth. Journal of Crystal Growth.DOI
  34. Xuewei Yan, Hang Zhang, Ning Tang, Sun Changbo, Qingyan Xu, Baicheng Liu (2018). Multi-scale simulation of single crystal hollow turbine blade manufactured by liquid metal cooling process. Progress in Natural Science Materials International.DOI
  35. Jing-an Yang, Baicheng Liu, Houfa Shen (2018). Study of hot cracking potential in a 6-ton steel ingot casting. Metallurgical Research & Technology.DOI
  36. 许自霖，李忠林，张航，许庆彦，柳百成（2017）. DD6合金选晶器定向凝固的数值模拟与实验. 《稀有金属材料与工程》.
  37. 陈瑞，许庆彦，郭会廷，夏志远，吴勤芳，柳百成（2017）. Al-7Si-Mg铸造铝合金凝固和热处理过程微观组织模拟和屈服强度预测. 《稀有金属》.
  38. 王润楠，许庆彦，柳百成（2017）. 计算机模拟技术在航空发动机涡轮叶片制造中的应用. 《自然杂志》.
  39. 陈瑞，许庆彦，郭会廷，夏志远，吴勤芳，柳百成（2017）. Al-7Si-Mg铝合金拉伸过程应变硬化行为及力学性能模拟研究. 《金属学报》.
  40. 苏香林，孙长波，许庆彦，柳百成（2017）. 低Re镍基单晶高温合金平衡相析出行为的热力学模拟计算. 《稀有金属材料与工程》.
  41. 柳百成（2017）. 加强先进基础工艺创新能力. 《中国工业和信息化》.
  42. 柳百成（2017）. 柳百成：顽强拼搏 报效祖国. 《人民论坛》, No. 3.下载原文
  43. Xianglin Su, Qingyan Xu, Runnan Wang, Zilin Xu, Shizhong Liu, Baicheng Liu (2017). Microstructural evolution and compositional homogenization of a low Re-bearing Ni-based single crystal superalloy during through progression of heat treatment. Materials & Design.DOI
  44. Zilin Xu, Jiangwei Zhong, Xianglin Su, Qingyan Xu, Baicheng Liu (2017). Experimental study on mechanical properties of silica-based ceramic core for directional solidification of single crystal superalloy. Ceramics International.DOI
  45. Xuewei Yan, Qingyan Xu, Baicheng Liu (2017). Numerical simulation of dendrite growth in nickel-based superalloy and validated by in-situ observation using high temperature confocal laser scanning microscopy. Journal of Crystal Growth.DOI
  46. Jing-an Yang, Yue-qiao Wang, Houfa Shen, Baicheng Liu (2017). Numerical simulation of central shrinkage crack formation in a 234-t steel ingot. China Foundry.DOI
  47. Cong Yang, Qingyan Xu, Baicheng Liu (2017). GPU-accelerated three-dimensional phase-field simulation of dendrite growth in a nickel-based superalloy. Computational Materials Science.DOI
  48. Xuewei Yan, Run’ nan Wang, Qingyan Xu, Baicheng Liu (2017). Numerical Simulation and Experimental Casting of Nickel-Based Single-Crystal Superalloys by HRS and LMC Directional Solidification Processes. High Temperature Materials and Processes.DOI
  49. Runnan Wang, Xuewei Yan, Zhonglin Li, Qingyan Xu, Baicheng Liu (2017). Effect of Construction Manner of Mould Cluster on Stray Grain Formation in Dummy Blade of DD6 Superalloy. High Temperature Materials and Processes.DOI
  50. 许庆彦，王润楠，柳百成（2016）. 镍基单晶高温合金涡轮叶片定向凝固过程多尺度建模与仿真. 《第十三届全国铸造年会暨2016中国铸造活动周论文集》.
  51. 陈瑞，许庆彦，郭会廷，夏志远，吴勤芳，柳百成（2016）. Al-7Si-Mg铸造铝合金拉伸过程应力——应变曲线和力学性能的模拟. 《2016中国有色合金及特种铸造发展论坛论文集》.DOI
  52. 闫学伟，唐宁，刘孝福，税国彦，郭新力，许庆彦，柳百成（2016）. 液态金属冷却定向凝固数值模拟与试验研究. 《特种铸造及有色合金》.
  53. 闫学伟，王润楠，杨聪，许庆彦，柳百成（2016）. 数值模拟技术在制备燃气轮机叶片中的应用. 《特种铸造及有色合金》.
  54. 陈瑞，许庆彦，柳百成（2016）. Al-Mg-Si合金中针棒状析出相时效析出动力学及强化模拟研究. 《金属学报》.
  55. 柳百成（2016）. 工业强基是建设制造强国的关键. 《中国工业和信息化》.
  56. 柳百成（2016）. 《中国制造2025》——建设制造强国之路. 《表面工程与再制造》.
  57. Rui Chen, Qingyan Xu, Huiting Guo, Zhiyuan Xia, Qinfang Wu, Baicheng Liu (2016). Correlation of solidification microstructure refining scale, Mg composition and heat treatment conditions with mechanical properties in Al-7Si-Mg cast aluminum alloys. Materials Science and Engineering A.DOI
  58. Rui Chen, Qingyan Xu, Huiting Guo, Zhiyuan Xia, Qinfang Wu, Baicheng Liu (2016). Modeling the precipitation kinetics and tensile properties in Al-7Si-Mg cast aluminum alloys. Materials Science and Engineering A.DOI
  59. Zhe-xin Xu, Xianglin Su, Qingyan Xu, Baicheng Liu (2016). Numerical simulation on vacuum solution heat treatment and gas quenching process of a low rhenium-containing Ni-based single crystal turbine blade. China Foundry.DOI
  60. Wutao Tu, Zhenhu Duan, Bingzhen Shen, Houfa Shen, Baicheng Liu (2016). Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a Multicomponent Multiphase Model. JOM.DOI
  61. Zhenhu Duan, Wutao Tu, Bingzhen Shen, Houfa Shen, Baicheng Liu (2016). Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton Steel Ingot. Metallurgical and Materials Transactions A.DOI
  62. Jing-an Yang, Houfa Shen, Baicheng Liu, Xu Yadong, Yongping Hu, Bingwang Lei (2016). Analysis of internal crack in a six-ton P91 ingot. China Foundry.DOI
  63. Jinwu Kang, Baicheng Liu (2016). Stereo 3D spatial phase diagrams. Journal of Alloys and Compounds.DOI
  64. Rui Chen, Qingyan Xu, Baicheng Liu (2016). Modeling of aluminum-silicon irregular eutectic growth by cellular automaton model. China Foundry.DOI
  65. Zhong Lin Li, Qing Yan Xu, Ji Chun Xiong, Jia Rong Li, Baicheng Liu (2016). Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy. Materials science forum.DOI
  66. Xue Wei Yan, Ning Tang, Xiao Fu Liu, Xin Li Guo, Guo-yan Shui, Qing Yan Xu, Baicheng Liu (2016). Numerical Simulation of Directionally Solidified Industrial Gas Turbine Hollow Blades by Liquid Metal Cooling. Materials science forum.DOI
  67. Zhenhu Duan, Xuan Du, Houfa Shen, Baicheng Liu (2016). Experimental and Numerical Study of Macrosegregation in a 160 Steel Ingot. Materials science forum.DOI
  68. Qing Yan Xu, Rui Chen, Yu Shi, Baicheng Liu (2016). A Model for Prediction of Yield Stress of Heat Treated Al-7Si-Mg Cast Alloys. Materials science forum.DOI
  69. Zhonglin Li, Qingyan Xu, Baicheng Liu (2016). Experimental investigation on recrystallization mechanism of a Ni-base single crystal superalloy. Journal of Alloys and Compounds.DOI
  70. Zhenhu Duan, Houfa Shen, Jinwu Kang, Baicheng Liu (2016). Numerical Study and Experimental Validation of Multiple Pouring Process in A 438‐t Steel Ingot.DOI
  71. 柳百成（2015）. 发展先进工艺 建设制造强国. 《2015中国铸造活动周论文集》.
  72. 唐宁，王艳丽，许庆彦，赵希宏，柳百成（2015）. 宽弦航空叶片Bridgeman定向凝固组织数值模拟. 《金属学报》.
  73. 柳百成（2015）. 发展先进工艺建设制造强国. 《中国铸造行业第七届高层论坛》.
  74. 陈瑞，许庆彦，柳百成（2015）. Al-7Si-0.36Mg合金定向凝固一次枝晶臂间距实验和模拟. 《中国有色金属学报》.
  75. 闫学伟，唐宁，刘孝福，税国彦，许庆彦，柳百成（2015）. 镍基高温合金铸件液态金属冷却定向凝固建模仿真及工艺规律研究. 《金属学报》.
  76. 陈瑞，许庆彦，吴勤芳，郭会廷，柳百成（2015）. Al-7Si-Mg合金凝固过程形核模型建立及枝晶生长过程数值模拟. 《金属学报》.
  77. 柳百成（2015）. 柳百成题词. 《表面工程与再制造》.
  78. 柳百成（2015）. “中国制造2025”现状与思考. 《人民公仆》.
  79. 柳百成（2015）. 中国制造业现状及国际先进制造技术发展趋势. 《世界制造技术与装备市场》.
  80. Rui Chen, Qingyan Xu, Zhaonian Jia, Baicheng Liu (2015). Precipitation behavior and hardening effects of Si-containing dispersoids in Al–7Si–Mg alloy during solution treatment. Materials & Design.DOI
  81. Haowei Pan, Zhiqiang Han, Baicheng Liu (2015). Study on Dendritic Growth in Pressurized Solidification of Mg–Al Alloy Using Phase Field Simulation. Journal of Material Science and Technology.DOI
  82. Zhenhu Duan, Houfa Shen, Baicheng Liu (2015). A Numerical Study of the Effect of Multiple Pouring on Macrosegregation in a 438-Ton Steel Ingot. Acta Metallurgica Sinica (English Letters).DOI
  83. Zhonglin Li, Xiangyu Fan, Qingyan Xu, Baicheng Liu (2015). Influence of deformation temperature on recrystallization in a Ni-based single crystal superalloy. Materials Letters.DOI
  84. Zhenhu Duan, Xuan Du, Houfa Shen, Baicheng Liu (2015). Numerical study of macrosegregation in a large steel ingot with multiple pouring process. IOP Conference Series Materials Science and Engineering.DOI
  85. Rui Chen, Qingyan Xu, Baicheng Liu (2015). Equiaxed and columnar dendrite growth simulation in Al-7Si- Mg ternary alloys using cellular automaton method. IOP Conference Series Materials Science and Engineering.DOI
  86. Zhonglin Li, Qingyan Xu, Baicheng Liu (2015). Microstructure simulation on recrystallization of an as-cast nickel based single crystal superalloy. Computational Materials Science.DOI
  87. Rui Chen, Qingyan Xu, Baicheng Liu (2015). Cellular automaton simulation of three-dimensional dendrite growth in Al–7Si–Mg ternary aluminum alloys. Computational Materials Science.DOI
  88. Wutao Tu, Houfa Shen, Baicheng Liu (2015). Numerical simulation of macrosegregation during solidification of binary alloys. Rare Metals.DOI
  89. Zhiqiang Han, Guomin Han, Alan A. Luo, Baicheng Liu (2015). Large-scale three-dimensional phase-field simulation of multi-variant β-Mg17Al12 in Mg–Al-based alloys. Computational Materials Science.DOI
  90. Haowei Pan, Zhiqiang Han, Alan A. Luo, Baicheng Liu (2015). Phase Field Simulation on Dendritic Growth in Pressurized Solidification of Mg‐Al Alloy.DOI
  91. Wutao Tu, Houfa Shen, Baicheng Liu (2015). Modeling of Macrosegregation During Solidification of Steel Ingot Casting.DOI
  92. Zhonglin Li, Qingyan Xu, Baicheng Liu (2015). Simulation and Experimental Study of Recrystallization Kinetics of Nickel Based Single Crystal Superalloys. Materials Today Proceedings.DOI
  93. 唐宁，闫学伟，许庆彦，柳百成（2014）. 基于ProCAST二次开发的叶片LMC凝固特征模拟. 《铸造》.
  94. 唐宁，张航，许庆彦，柳百成（2014）. 空心叶片LMC定向凝固温度场和微观组织模拟. 《特种铸造及有色合金》.
  95. 张航，许庆彦，史振学，柳百成（2014）. DD6高温合金定向凝固枝晶生长的数值模拟研究. 《金属学报》.
  96. 陈瑞，许庆彦，柳百成（2014）. 基于元胞自动机方法的定向凝固枝晶竞争生长数值模拟. 《物理学报》.
  97. 柳百成（2014）. 令人难忘的日子. 《神州学人》.
  98. 陈瑞，石玉峰，许庆彦，柳百成（2014）. 冷却速度对Al-7Si-0.3Mg-0.15Fe合金凝固参数和微观组织的影响(英文). Transactions of Nonferrous Metals Society of China.
  99. 柳百成（2014）. 培养杰出创新人才“两策”. 《中国人才》.
  100. Zhizhong Li, Qingyan Xu, Jie Xiong, J. Li, Baicheng LIU (2014). Simulation and experiments on plasticity and recrystallisation in SX superalloys by investment casting. Materials Research Innovations.DOI
  101. Rui Chen, Qingyan Xu, Baicheng Liu (2014). Simulation of the Dendrite Morphology and Microsegregation in Solidification of Al–Cu–Mg Aluminum Alloys. Acta Metallurgica Sinica (English Letters).DOI
  102. Guomin Han, Zhiqiang Han, Alan A. Luo, Baicheng Liu (2014). Three-Dimensional Phase-Field Simulation and Experimental Validation of β-Mg17Al12 Phase Precipitation in Mg-Al-Based Alloys. Metallurgical and Materials Transactions A.DOI
  103. Zhonglin Li, Jichun Xiong, Qingyan Xu, Jiarong Li, Baicheng Liu (2014). Deformation and recrystallization of single crystal nickel-based superalloys during investment casting. Journal of Materials Processing Technology.DOI
  104. Jinwu Kang, Xiaokun Hao, Gang Nie, Haimin Long, Baicheng Liu (2014). Intensive riser cooling of castings after solidification. Journal of Materials Processing Technology.DOI
  105. Rui Chen, Qingyan Xu, Baicheng Liu (2014). A Modified Cellular Automaton Model for the Quantitative Prediction of Equiaxed and Columnar Dendritic Growth. Journal of Material Science and Technology.DOI
  106. Rui Chen, Yufeng Shi, Qingyan Xu, Baicheng Liu (2014). Effect of cooling rate on solidification parameters and microstructure of Al-7Si-0.3Mg-0.15Fe alloy. Transactions of Nonferrous Metals Society of China.DOI
  107. Wutao Tu, Houfa Shen, Baicheng Liu (2014). Numerical Simulations of Macrosegregation: A Comparison between Orthogonal Grids and Non-Orthogonal Grids. Advanced materials research.DOI
  108. Hang Zhang, Qingyan Xu, Baicheng Liu (2014). Numerical Simulation and Optimization of Directional Solidification Process of Single Crystal Superalloy Casting. Materials.DOI
  109. John E. Allison, Baicheng Liu, Kevin P. Boyle, Lou Hector, R.C. McCune (2014). Integrated Computational Materials Engineering for Magnesium in Automotive Body Applications.DOI
  110. Wutao Tu, Wensheng Li, Houfa Shen, Baicheng Liu (2014). Numerical Simulation of Macrosegregation with Multiphase Model and Non‐Orthogonal Grids.DOI
  111. Wutao Tu, Houfa Shen, Baicheng Liu (2014). Two-Phase Modeling of Macrosegregation in a 231 t Steel Ingot. ISIJ International.DOI
  112. Bin Su, Zhiqiang Han, Zhao Yongrang, Bingzhen Shen, Xu Enxian, Shujun Huang, Baicheng Liu (2014). Numerical Simulation of Microstructure Evolution of Heavy Steel Casting in Casting and Heat Treatment Processes. ISIJ International.DOI
  113. Jinwu Kang, Chao Dong, Xiaokun Hao, Gang Nie, Houfa Shen, Baicheng Liu (2014). Water Analog Experimental Method for the Diffusion and Distribution of Alloy Elements in Liquid Steel during Ingot Filling Process. ISIJ International.DOI
  114. 康进武，王硕，张驰，沈厚发，柳百成（2013）. 大型水轮机叶片铸件铸态微观组织的数值模拟. 《第五届中国环渤海经济区铸造论坛论文集》.
  115. 石玉峰，许庆彦，柳百成（2013）. 基于改进元胞自动机方法的强制对流作用下三维枝晶生长的数值模拟. 《稀有金属材料与工程》.
  116. 吴春龙，许庆彦，熊继春，李忠林，李嘉荣，柳百成（2013）. 镍基单晶高温合金再结晶过程模拟研究. 《金属学报》.
  117. 张航，许庆彦，孙长波，戚翔，唐宁，柳百成（2013）. 单晶高温合金螺旋选晶过程的数值模拟与实验研究 Ⅰ.引晶段. 《金属学报》.
  118. 韩国民，韩志强，AlanA.Luo，AnilK.Sachdev，柳百成（2013）. Mg-Al合金Mg17Al12连续析出相形貌的相场模拟. 《金属学报》.
  119. 唐宁，孙长波，张航，许庆彦，柳百成（2013）. 高温合金单晶叶片定向凝固过程的宏微观数值模拟. 《稀有金属材料与工程》.
  120. 柳百成（2013）. 数字化制造需要新思维. 《中国经济和信息化》.
  121. Hang Zhang, Qingyan Xu, Changbo SUN, Xiang QI, Ning TANG, Baicheng LIU (2013). SIMULATION AND EXPERIMENTAL STUDIES ON GRAIN SELECTION BEHAVIOR OF SINGLE CRYSTAL SUPERALLOY II. Spiral Part. Acta Metallurgica Sinica.DOI
  122. Wutao Tu, Bingzhen Shen, Houfa Shen, Baicheng Liu (2013). Multiphase Modeling of Macrosegregation Formation in Steel Ingot.DOI
  123. Qingyan Xu, Hang Zhang, Xiang Dong Qi, Baicheng Liu (2013). Multiscale Modeling and Simulation of Directional Solidification Process of Turbine Blade Casting with MCA Method. Metallurgical and Materials Transactions B.DOI
  124. Jinwu Kang, Tianjiao Wang, Tianyou Huang, Baicheng Liu (2013). Deformation Prediction of a Heavy Hydro Turbine Blade During the Casting Process with Consideration of Martensitic Transformation. Metallurgical and Materials Transactions A.DOI
  125. Wensheng Li, Houfa Shen, Xiong Zhang, Baicheng Liu (2013). Modeling of Species Transport and Macrosegregation in Heavy Steel Ingots. Metallurgical and Materials Transactions B.DOI
  126. Guomin Han, Zhiqiang Han, Alan A. Luo, Anil K. Sachdev, Baicheng Liu (2013). A phase field model for simulating the precipitation of multi-variant β-Mg17Al12 in Mg–Al-based alloys. Scripta Materialia.DOI
  127. Guomin Han, Zhiqiang Han, Alan A. Luo, Anil K. Sachdev, Baicheng Liu (2013). Study on Effects of Interfacial Anisotropy and Elastic Interaction on Morphology Evolution and Growth Kinetics of a Single Precipitate in Mg‐Al Alloy by Phase Field Modelling.DOI
  128. Bin Su, Zhiqiang Han, Baicheng Liu (2013). Cellular Automaton Modeling of Austenite Nucleation and Growth in Hypoeutectoid Steel during Heating Process. ISIJ International.DOI
  129. Chengang Wu, Qingyan Xu, Jichun XIONG, Zhonglin Li, Jiarong Li, Baicheng Liu (2013). NUMERICAL SIMULATION OF RECRYSTALLIZATIONPROCESS OF NICKEL BASE SINGLECRYSTAL SUPERALLOY. Acta Metallurgica Sinica.DOI
  130. Guomin Han, Zhiqiang Han, A.Luo Alan, K.Sachev Anil, Baicheng Liu (2013). PHASE FIELD SIMULATION ON MORPHOLOGY OF CONTINUOUS PRECIPITATE Mg 17 Al 12 IN Mg-Al ALLOY. Acta Metallurgica Sinica.DOI
  131. 洪耀武，王铁军，韩大平，许庆彦，柳百成（2012）. 调节片熔模铸造过程的应力数值模拟. 《中国有色金属学报》.
  132. 石玉峰，许庆彦，柳百成（2012）. 不同择优生长取向角枝晶生长的数值模拟. 《中国有色金属学报》.
  133. 唐宁，许庆彦，柳百成（2012）. 重型燃气轮机叶片熔模铸造凝固过程数值模拟. 《铸造技术》.
  134. 徐吉祥，许庆彦，程锦，张虎，柳百成（2012）. 考虑包晶相的Ti-Al合金定向凝固枝晶生长数值模拟. 《铸造》.
  135. 李彦达，韩志强，黄晓然，万里，柳百成（2012）. 挤压铸造铝合金铸件内部温度测量及组织特征. 《特种铸造及有色合金》.
  136. 石玉峰，许庆彦，柳百成（2012）. 定向凝固共晶生长的元胞自动机数值模拟. 《金属学报》.
  137. 韩国民，韩志强，霍亮，段军鹏，朱训明，柳百成（2012）. 考虑固溶及时效处理的镁合金铸件微观组织模拟及力学性能预测. 《金属学报》.
  138. 李文胜，沈厚发，柳百成（2012）. 宏观偏析数学模型在大型钢锭中的应用. 《大型铸锻件》.
  139. 柳百成，闻玉梅，袁家军，潘际銮（2012）. 直面“钱学森之问”(Ⅱ). 《科技导报》.
  140. 石玉峰，许庆彦，柳百成（2012）. 三维枝晶生长数值模拟及实验验证(英文). Transactions of Nonferrous Metals Society of China.
  141. Yufeng Shi, Qingyan Xu, Baicheng LIU (2012). SIMULATION OF EUTECTIC GROWTH IN DIRECTIONAL SOLIDIFICATION BY CELLULAR AUTOMATON METHOD. Acta Metallurgica Sinica.DOI
  142. Guomin Han, Zhiqiang Han, Liang HUO, Junpeng Duan, Xunming ZHU, Baicheng LIU (2012). MICROSTRUCTURE SIMULATION AND MECHANICAL PROPERTY PREDICTION OF MAGNESIUM ALLOY CASTING CONSIDERING SOLID SOLUTION AND AGING PROCESS. Acta Metallurgica Sinica.DOI
  143. Yufeng Shi, Qingyan Xu, Baicheng Liu (2012). Simulation and experimental validation of three-dimensional dendrite growth. Transactions of Nonferrous Metals Society of China.DOI
  144. Wensheng Li, Houfa Shen, Baicheng Liu (2012). Numerical simulation of macrosegregation in steel ingots using a two-phase model. International Journal of Minerals Metallurgy and Materials.DOI
  145. Wensheng Li, Bingzhen Shen, Houfa Shen, Baicheng Liu (2012). Modelling of macrosegregation in steel ingots: benchmark validation and industrial application. IOP Conference Series Materials Science and Engineering.DOI
  146. Yufeng Shi, Yan Zhang, Qingyan Xu, Baicheng Liu, Hongbao Cui, Guofa Mi (2012). Modeling and simulation of dendrite growth in solidification of Al-Si-Mg ternary alloys. IOP Conference Series Materials Science and Engineering.DOI
  147. Yanda Li, Zhiqiang Han, Alan A. Luo, Anil K. Sachdev, Baicheng Liu (2012). Microstructure Simulation in Pressurized Solidification during Squeeze Casting of Aluminum Alloy A356.DOI
  148. Bin Su, Zhiqiang Han, Baicheng Liu, Zhao Yongrang, Bingzhen Shen, Lianzhen Zhang (2012). Numerical Simulation on Solidification Microstructure of Cast Steel using Cellular Automaton Method.DOI
  149. Jinwu Kang, Tianjiao Wang, Tianyou Huang, Baicheng Liu (2012). Deformation Prediction of a Heavy Hydro Turbine Blade During Casting Process with Consideration of Martensitic Transformation.DOI
  150. Guangyue Zhang, Tao Jing, Baicheng Liu (2012). Dendritic morphology simulation using the phase field method. Tsinghua Science & Technology.
  151. Baicheng Liu (2012). Numerical simulation of dendrite growth with different preferred growth orientation angles. The Chinese Journal of Nonferrous Metals.
  152. 韩志强，李金玺，杨文，赵海东，柳百成（2011）. 铝合金挤压铸造过程微观孔洞形成的建模与仿真. 《金属学报》.
  153. 石玉峰，许庆彦，龚铭，柳百成（2011）. 定向凝固过程中NH4Cl-H2O枝晶生长的数值模拟. 《金属学报》.
  154. 唐宁，许庆彦，柳百成（2011）. 重型燃气轮机叶片熔模铸造过程数值模拟. 《特种铸造及有色合金》.
  155. 洪耀武，孙长波，康进武，许庆彦，柳百成（2011）. 定向凝固简化空心叶片热应力数值模拟. 《铸造》.
  156. 苏斌，韩志强，赵永让，沈丙振，张连振，柳百成（2011）. ASTM A216 WCA铸钢凝固及冷却过程相变的CA模拟. 《金属学报》.
  157. 石玉峰，许庆彦，李忠林，柳百成，吴勤芳，吴伟强，杨洪伟（2011）. 基于CA方法的铝合金铸件微观组织的数值模拟. 《铸造》.
  158. 许庆彦，潘冬，于靖，柳百成（2011）. 数值模拟技术在航空发动机高温合金单晶叶片制造中的应用. 《航空制造技术》.
  159. 石玉峰，许庆彦，柳百成（2011）. 对流作用下枝晶形貌演化的数值模拟和实验研究. 《物理学报》.
  160. 李文胜，沈丙振，沈厚发，柳百成（2011）. 53t钢锭凝固过程数值模拟与实验验证. 《第八届（2011）中国钢铁年会论文集》.
  161. 柳百成，熊守美（2011）. 汽车工业镁合金压铸成形技术及模拟仿真. 《汽车安全与节能学报》.
  162. 张长利，沈厚发，柳百成（2011）. 低碳高强钢奥氏体晶粒粗化对高温流变行为的影响. 《热加工工艺》.
  163. 苏斌，韩志强，赵永让，沈丙振，柳百成（2011）. ASTM A216 WCA铸钢低倍组织及微观组织实验研究. 《热加工工艺》.
  164. Hang Zhang, Qingyan Xu, Ning Tang, Dong Pan, Baicheng Liu (2011). Numerical simulation of microstructure evolution during directional solidification process in directional solidified (DS) turbine blades. Science China Technological Sciences.DOI
  165. Zhiqiang Han, X.S. Huang, Alan A. Luo, Anil K. Sachdev, Baicheng Liu (2011). A quantitative model for describing crystal nucleation in pressurized solidification during squeeze casting. Scripta Materialia.DOI
  166. Zhiqiang Han, Liang HUO, Baicheng Liu (2011). Modeling and Simulation of Process‐Structure‐Property of Magnesium Alloy Casting.DOI
  167. Dan Yu-Feng, XU Qiang-Pan, Ming Gong, Baicheng Liu (2011). SIMULATION OF NH4Cl-H2O DENDRITIC GROWTH IN DIRECTIONAL SOLIDIFICATION. Acta Metallurgica Sinica.DOI
  168. Dong Pan, Qingyan Xu, Baicheng Liu (2011). Three-dimensional microstructure simulation of Ni-based superalloy investment castings. Science China Physics Mechanics and Astronomy.DOI
  169. Baicheng Liu, Qingyan Xu, Tao Jing, Houfa Shen, Zhiqiang Han (2011). Advances in multi-scale modeling of solidification and casting processes. JOM.DOI
  170. Liang Huo, Zhiqiang Han, Baicheng Liu, Xunming Zhu, Junpeng Duan, Aimin Wang (2011). Modeling and Simulation of Mechanical Properties of Magnesium Alloy Wheel Casting for Automobile.DOI
  171. Wensheng Li, Houfa Shen, Baicheng Liu (2011). Simulation of Macrosegregation Due to Melt Convection and Grain Sedimentation in Steel Ingots Using a Mixture Model.DOI
  172. Zhiqiang Han, Jinxi Li, Wen Zhi Yang, Baicheng Liu (2011). A Mathematical Model for Simulating the Microporosity of Squeeze Casting of Aluminum Alloy.DOI
  173. X.S. Huang, Zhiqiang Han, Baicheng Liu (2011). Study on the effect of pressure on the equilibrium and stability of the solid-liquid interface in solidification of binary alloys. Science China Technological Sciences.DOI
  174. Changli Zhang, Michel Bellet, Manuel Bobadilla, Houfa Shen, Baicheng Liu (2011). Inverse finite element modelling and identification of constitutive parameters of UHS steel based on Gleeble tensile tests at high temperature. Inverse Problems in Science and Engineering.DOI
  175. Baicheng Liu (2011). Effect of Austenite Grain Coarsening on Rheological Behavior of Low-carbon High-strength Steel at High Temperature. Rejiagong gongyi.
  176. 张长利，Michel Bellet，Manuel Bobadilla，沈厚发，柳百成（2010）. 微合金低碳钢高温拉伸实验过程的有限元模拟. 《金属学报》.
  177. 潘冬，许庆彦，柳百成（2010）. 考虑炉壁温度变化的高温合金叶片定向凝固过程模拟. 《金属学报》.
  178. 程锦，许庆彦，张虎，郑立静，柳百成（2010）. 基于CA方法的Ti-45Al合金定向凝固过程微观组织模拟. 《铸造》.
  179. 李文胜，刘艳，周守航，韩庆礼，张西鹏，石立文，康进武，沈厚发，柳百成（2010）. 大型铸钢件热物性参数确定及在凝固模拟中的应用. 《铸造技术》.
  180. 孙长波，唐宁，史凤岭，费晶，许庆彦，柳百成（2010）. 机匣件真空熔模铸造的数值模拟. 《铸造》.
  181. 杨文，李金玺，韩志强，赵海东，柳百成（2010）. 挤压铸造压力对铝合金铸件微观孔洞影响的研究. 《特种铸造及有色合金》.
  182. 张家锋，邹金文，康进武，柳百成（2010）. FGH96粉末高温合金涡轮盘淬火过程界面换热系数的研究. 《航空材料学报》.
  183. 柳百成（2010）. 发展资源节约、环境友好的铸造技术. 《第九届中国铸造协会年会论文集》.
  184. 潘冬，许庆彦，柳百成（2010）. 镍基高温合金熔模铸件凝固过程宏/微观多尺度模拟. 《中国有色金属学报》.
  185. 张然，康进武，黄天佑，柳百成，胡永沂，吴英，戎子臣，张成春（2010）. ZG0Cr13Ni5Mo不锈钢马氏体相变塑性的实验研究及应用. 《清华大学学报(自然科学版)》.
  186. 李文胜，沈丙振，周翔，沈厚发，柳百成（2010）. 大型钢锭凝固过程三维数值模拟. 《大型铸锻件》.
  187. Haidong Zhao, Baicheng Liu (2010). Prediction of Microstructure and Porosity Formation of Practical Spheroidal Graphite Iron Castings. Key engineering materials.DOI
  188. Liang Huo, Zhi Qiang Han, Baicheng Liu (2010). Three-Dimensional Modeling and Simulation of Dendrite Morphology of Cast Mg Alloys. Materials science forum.DOI
  189. Jin Wu Kang, Tian Jiao Wang, Hailiang Yu, Tian You Huang, Baicheng Liu (2010). Optimization of the Cooling Process of a Heavy Hydraulic Turbine Runner Band Casting in Heat Treatment. Materials science forum.DOI
  190. Dong Pan, Qing Yan Xu, Baicheng Liu (2010). Numerical Simulation of Grain Selection Behavior of Single Crystal Ni3Al Based Superalloy Casting. Materials science forum.DOI
  191. Zhang Changli, Michel Bellet, Manuel Bobadilla, Houfa Shen, Baicheng Liu (2010). A Coupled Electrical–Thermal–Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at a High Temperature. Metallurgical and Materials Transactions A.DOI
  192. Dong Pan, Qingyan Xu, Baicheng Liu, Jiarong Li, Hailong Yuan, Haipeng Jin (2010). Modeling of grain selection during directional solidification of single crystal superalloy turbine blade castings. JOM.DOI
  193. Dong Pan, XU Qiang-Pan, Baicheng Liu (2010). MODELLING ON DIRECTIONAL SOLIDIFICATION OF SUPERALLOY BLADES WITH FURNACE WALL TEMPERATURE EVOLUTION. Acta Metallurgica Sinica.DOI
  194. Dong Pan, Qing Yan Xu, Baicheng Liu (2010). Modeling of Mircrostructure Evolution in Directional Solidification of Ni-Based Superalloy Turbine Blade. Advanced materials research.DOI
  195. Liang Huo, Zhi Qiang Han, Baicheng Liu (2010). Modeling and Simulation of Microstructure Evolution of Cast Mg Alloy. Materials science forum.DOI
  196. Dong Pan, Xu Qingyan, Baicheng Liu (2010). Multi-scale modeling of solidification process of Ni-based superalloy investment castings. The Chinese Journal of Nonferrous Metals.
  197. 张然，康进武，黄天佑，柳百成，胡永沂（2009）. ZG0Cr13Ni5Mo马氏体不锈钢的铸态高温力学性能测试研究. 《铸造技术》.
  198. 霍亮，韩志强，柳百成（2009）. 基于两套网格的CA方法模拟铸造镁合金凝固过程枝晶形貌演化. 《金属学报》.
  199. 朱维，韩志强，柳百成（2009）. 挤压铸造凝固过程热-力耦合模拟 Ⅱ.模拟计算及实验验证. 《金属学报》.
  200. 韩志强，朱维，柳百成（2009）. 挤压铸造凝固过程热-力耦合模拟 Ⅰ.数学模型及求解方法. 《金属学报》.
  201. 潘冬，许庆彦，叶小刚，柳百成（2009）. 铝合金半连续铸造过程中的液穴温度分布. 《清华大学学报(自然科学版)》.DOI
  202. 张焕鑫，刘瑞，沈厚发，柳百成（2009）. 薄板坯连铸结晶器流场与液位波动不稳定性的模拟研究. 《第七届(2009)中国钢铁年会论文集（上）》.
  203. 柳百成，王文乐（2009）. 留美是我人生重要的里程碑. 《神州学人》.
  204. Xiaobo Liu, Qingyan Xu, Tao Jing, Baicheng Liu (2009). Simulation of microstructures in solidification of aluminum twin-roll casting based on CA. Transactions of Nonferrous Metals Society of China.DOI
  205. 邹金文，刘东，柳百成，沈厚发（2009）. 涡轮盘风冷过程数值模拟研究. 《材料工程》.
  206. 柳百成（2009）. 铸造成形手册 上.
  207. Liang Huo, Bin Li, Yufeng Shi, Qingyan Xu, Zhiqiang Han, Baicheng Liu (2009). Simulation of magnesium alloy AZ91D microstructure using modified cellular automaton method. Tsinghua Science & Technology.DOI
  208. 柳百成（2009）. 铸造成形手册 下.
  209. Mingyue Wang, Tao Jing, Baicheng Liu (2009). Phase-field simulations of dendrite morphologies and selected evolution of primary α-Mg phases during the solidification of Mg-rich Mg–Al-based alloys. Scripta Materialia.DOI
  210. Qing Yan Xu, Bin Li, Baicheng Liu (2009). Application of Microstructure Simulation by Modified CA Method to Al Alloy Casting Production. Materials science forum.DOI
  211. Han Zhijiang, Zhu Wei, Baicheng Liu (2009). THERMOMECHANICAL MODELING OF SOLIDIFICATION PROCESS OF SQUEEZE CASTING I. Mathematic Model and Solution Methodology. Acta Metallurgica Sinica.
  212. Zhu Wei, Han Zhijiang, Baicheng Liu (2009). THERMOMECHANICAL MODELING OF SOLIDIFICATION PROCESS OF SQUEEZE CASTING II. Numerical Simulation and Experimental Validation. Acta Metallurgica Sinica.
  213. Baicheng Liu (2009). MODELING AND SIMULATION OF MICROSTRUCTURE EVOLUTION OF CAST MAGNESIUM ALLOYS USING CA METHOD BASED ON TWO SETS OF MESH. Acta Metallurgica Sinica.
  214. Zhipeng Guo, Shoumei Xiong, Baicheng Liu, Mei Li, John E. Allison (2009). Understanding of the influence of process parameters on the heat transfer behavior at the metal/die interface in high pressure die casting process. Science China Technological Sciences.DOI
  215. Baicheng Liu (2009). Melting zone temperature distribution during semi-continuous casting of an aluminum alloy. Journal of Tsinghua University(Science and Technology).
  216. 朱维，韩志强，贾湛湛，赵海东，柳百成（2008）. 挤压铸造铝合金弹粘塑性本构模型. 《金属学报》.
  217. 柳百成（2008）. 节约资源、环境友好的铸造生产. 《第八届中国铸造协会年会》.
  218. 贾湛湛，朱维，韩志强，赵海东，柳百成（2008）. 挤压铸造铝合金高温力学行为试验. 《特种铸造及有色合金》.
  219. 李斌，许庆彦，潘冬，柳百成，熊艳才，周永江，洪润洲（2008）. 低压铸造ZL114A铝合金微观组织模拟. 《金属学报》.
  220. 缪家明，荆涛，柳百成（2008）. 镁合金枝晶形貌的相场方法模拟. 《金属学报》.
  221. 朱维，韩志强，柳百成（2008）. 挤压铸造过程热-力耦合分析的有限元模型. 《特种铸造及有色合金》.
  222. 陈永，张长利，沈厚发，柳百成（2008）. 连铸结晶器电磁搅拌磁场及钢液流场模拟. 《钢铁研究学报》.
  223. 张家锋，张新平，许庆彦，熊守美，柳百成（2008）. 不同表面处理工艺压铸镁合金涂层耐蚀性研究. 《材料科学与工艺》.
  224. 程建国，康进武，张家锋，黄天佑，柳百成（2008）. 从凝固过程的位移数值模拟结果中提取铸件的变形. 《铸造技术》.
  225. 张焕鑫，孟广兵，沈厚发，柳百成（2008）. 薄板坯连铸机结晶器流场和液位波动规律的模拟研究. 《2008年全国炼钢——连铸生产技术会议》.
  226. 柳百成（2008）. 加强产学研结合提高大型铸件自主创新能力. 《装备制造》.
  227. 柳百成（2008）. 建模与仿真在装备制造中的作用与前景. 《航空制造技术》.
  228. Xiaobo Liu, Qingyan Xu, Tao Jing, Baicheng Liu (2008). Microstructure of aluminum twin-roll casting based on Cellular Automation. Transactions of Nonferrous Metals Society of China.DOI
  229. 柳百成（2008）. 提高装备制造业自主创新能力. 《装备制造》.
  230. Rui Yang Liu, Wei Ji, Li Jin, Houfa Shen, Baicheng Liu (2008). Numerical Simulation of Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds. steel research international.DOI
  231. Zhipeng Guo, Xiong Shou-mei, Baicheng Liu, Mei Li, John E. Allison (2008). Determination of the heat transfer coefficient at metal–die interface of high pressure die casting process of AM50 alloy. International Journal of Heat and Mass Transfer.DOI
  232. Qingyan Xu, Bin Li, Ying Liu, Baicheng Liu (2008). Numerical modelling of microstructure evolution and dendrite growth in alloy solidification process. International Journal of Materials and Product Technology.DOI
  233. Baicheng Liu (2008). NUMERICAL SIMULATION OF DENDRITIC MORPHOLOGY OF MAGNESIUM ALLOYS USING PHASE FIELD METHOD. Acta Metallurgica Sinica.
  234. Baicheng Liu (2008). Extraction of Deformation of Castings from Simulated Displacement Results. Rejiagong gongyi.
  235. Baicheng Liu (2008). Numerical Simulation of Electromagnetic Stirring Field and Molten Steel Flow Field in Mold of Bloom Continuous Casting. Gangtie yanjiu xuebao.
  236. Baicheng Liu (2008). Corrosion resistance of die casting magnesium alloy treated by different surface treatment methods. Materials Science and Technology.
  237. 闫焉服，熊守美，柳百成，John Allison（2007）. 铸造压力对ADC12Z压铸件孔洞和力学性能的影响. 《铸造》.
  238. 黄天佑，刘小刚，康进武，沈厚发，柳百成（2007）. 我国大型铸钢件生产的现状与关键技术. 《铸造》.
  239. 李斌，许庆彦，熊艳才，周永江，洪润洲，柳百成（2007）. 低压铸造ZL114A合金微观组织的研究与数值模拟. 《特种铸造及有色合金》.
  240. 于靖，许庆彦，崔锴，柳百成（2007）. 基于一种改进CA模型的微观组织模拟. 《金属学报》.
  241. 崔锴，许庆彦，于靖，柳百成，木间塚明彦，黑木康德，横山文彦（2007）. 高温合金叶片定向凝固过程中辐射换热的计算. 《金属学报》.
  242. 刘志勇，许庆彦，柳百成（2007）. 铸造镁合金的枝晶生长模拟. 《金属学报》.
  243. 李斌，许庆彦，柳百成（2007）. 有外加相存在时Al-Si合金枝晶微观组织的数值模拟. 《金属学报》.
  244. 张家锋，康进武，柳百成（2007）. 铸件凝固过程的应力动态测量方法. 《铸造》.
  245. 于靖，许庆彦，李嘉荣，袁海龙，刘世忠，柳百成（2007）. 镍基高温合金多叶片定向凝固过程数值模拟. 《金属学报》.
  246. 霍亮，韩志强，柳百成（2007）. 铸造镁合金金相腐蚀和观察方法研究. 《铸造》.
  247. 罗筠，康进武，柳百成，融亦鸣（2007）. 工件气体淬火过程数值模拟. 《热加工工艺》.
  248. 张长利，陈永，沈厚发，柳百成（2007）. 大方坯结晶器电磁搅拌流场的数值模拟. 《第八届全国连铸学术会议》.
  249. 刘志勇，许庆彦，柳百成（2007）. 枝晶生长的介观尺度三维数值模拟. 《清华大学学报(自然科学版)》.
  250. 张桂芳，沈厚发，李伟，柳百成（2007）. 攀钢大方坯结晶器流场的数值模拟. 《第八届全国连铸学术会议》.
  251. Jing Hu Yu, Qing Yan Xu, Baicheng Liu, Jia Rong Li, Hailong Yuan (2007). Numerical Simulation of Unidirectional Solidification Process of Turbine Blade Castings. Advanced materials research.DOI
  252. Jie Yang, Lang Yuan, Shou Mei Xiong, Baicheng Liu (2007). Numerical Simulation on the Liquid Metal Flow of the Acceleration Phase in the Shot Sleeve of Cold Chamber Die Casting Process. Materials science forum.DOI
  253. Bin Li, Qing Yan Xu, Baicheng Liu (2007). Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting during Low Pressure Die Casting. Materials science forum.DOI
  254. Liang Huo, Zhi Qiang Han, Zhi Yong Liu, Baicheng Liu (2007). A Simplified CA Method for Simulating the Microstructure of Magnesium Alloy Components. Materials science forum.DOI
  255. Jia Feng Zhang, Jin Wu Kang, Baicheng Liu (2007). Study on Dynamic Measurement of Thermal Stress during Solidification of a Casting Specimen. Materials science forum.DOI
  256. Baicheng Liu, Shoumei Xiong, Qingyan Xu (2007). Study on Macro- and Micromodeling of the Solidification Process of Aluminum Shape Casting. Metallurgical and Materials Transactions B.DOI
  257. Jing Yu, Xu Qingyan, Kai Cui, Baicheng Liu (2007). Numerical Simulation of Microstructure Evolution Based on a Modified Ca Method. Acta Metallurgica Sinica.
  258. Houfa Shen, Bingzhen Shen, Baicheng Liu (2007). Water Modeling of the Fluid Flow Instability in Continuous Thin Slab Casting Mould. steel research international.DOI
  259. Zeqi Liu, Qing Yan Xu, Baicheng Liu (2007). Microstructure Simulation of Die Casting AZ91D Alloy. Materials science forum.DOI
  260. Baicheng Liu (2007). 8th International Symposium on Science and Processing of Cast Iron. International Journal of Cast Metals Research.DOI
  261. Bin Li, Xu Qingyan, Baicheng Liu (2007). Numerical simulation of dendrite microstructure for Al-Si alloy with additive phase. Acta Metallurgica Sinica.
  262. Bingzhen Shen, Houfa Shen, Baicheng Liu (2007). Instability of Fluid Flow and Level Fluctuation in Continuous Thin Slab Casting Mould. ISIJ International.DOI
  263. Baicheng Liu (2007). RADIATIVE HEAT TRANSFER CALCULATION FOR SUPERALLOY TURBINE BLADE IN DIRECTIONAL SOLIDIFICATION PROCESS. Acta Metallurgica Sinica.
  264. Baicheng Liu (2007). Study on Metallographic Techniques for Cast Mg Alloy.
  265. Baicheng Liu (2007). MODELING OF DENDRITE GROWTH FOR THE CAST MAGNESIUM ALLOY. Acta Metallurgica Sinica.
  266. Baicheng Liu (2007). Three-dimensional numerical simulation of meso-scale dendritic growth in alloys. Journal of Tsinghua University(Science and Technology).
  267. 赵海东，柳百成（2006）. 球墨铸铁件铁素体与珠光体形成的数值模拟. 《铸造技术》.
  268. 熊守美，袁建路，刘艳改，刘文辉，柳百成（2006）. 快速充型对镁合金压铸件质量的影响. 《材料科学与工艺》.
  269. 刘小刚，康进武，罗通国，杨小兵，王长建，程建国，黄天佑，柳百成（2006）. 水轮机下环铸件凝固过程热应力模拟分析. 《铸造技术》.
  270. 曹海峰，沈厚发，柳百成（2006）. 镍基高温合金定向凝固斑点偏析的数值模拟研究. 《稀有金属材料与工程》.
  271. 李斌，许庆彦，李旭东，柳百成（2006）. SiC/Al-Si复合材料颗粒分布的数值模拟. 《特种铸造及有色合金》.DOI
  272. 于靖，许庆彦，柳百成（2006）. 铸钢件熔模精密铸造凝固过程数值模拟. 《铸造》.
  273. 李斌，许庆彦，李旭东，柳百成（2006）. 搅拌铸造SiCp/Al-7．0%Si复合材料的三维微观组织模拟. 《金属学报》.
  274. 刘志勇，许庆彦，柳百成（2006）. AZ91D压铸镁合金的三维微观组织模拟. 《金属学报》.
  275. 康进武，刘小刚，张然，黄天佑，柳百成（2006）. 水轮机下环铸钢件热应力数值模拟. 《首届中国大型铸锻件制造技术发展论坛》.
  276. 康进武，黄天佑，刘小刚，柳百成（2006）. 数值模拟技术在大型铸件中的应用. 《首届中国大型铸锻件制造技术发展论坛》.
  277. 张焕鑫，沈厚发，柳百成（2006）. 薄板坯连铸流场与中心偏析的大涡模拟. 《2006年薄板坯连铸连轧国际研讨会论文集》.
  278. Ying Liu, Qingyan Xu, Baicheng Liu (2006). A modified cellular automaton method for the modeling of the dendritic morphology of binary alloys. Tsinghua Science & Technology.DOI
  279. 沈丙振，叶世鸿，徐荣军，李永全，沈厚发，柳百成（2006）. 薄板坯连铸CSP结晶器液位波动影响因素的水力学模拟研究. 《2006年薄板坯连铸连轧国际研讨会论文集》.
  280. 柳百成（2006）. 中国材料工程大典（第18卷）. 《化学工业》.
  281. Shu-Hong Nie, Shoumei Xiong, Baicheng Liu (2006). Effects of residual F content in a sealed melting furnace on experimental results of cover gas research for magnesium alloys. Materials Science and Engineering A.DOI
  282. Ruijie Zhang, Tao Jing, Wanqi Jie, Baicheng Liu (2006). Phase-field simulation of solidification in multicomponent alloys coupled with thermodynamic and diffusion mobility databases. Acta Materialia.DOI
  283. Qing Yan Xu, Baicheng Liu, Zuo Jian Liang, Jia Rong Li, Shi Zhong Liu, Ha Llong Yuan (2006). Modeling of Unidirectional Growth in a Single Crystal Turbine Blade Casting. Materials science forum.DOI
  284. Huan Xin Zhang, Houfa Shen, Baicheng Liu (2006). Computational Modeling of Macroscopic Transportation in Continuous Castings. Materials science forum.DOI
  285. Bin Li, Qingyan Xu, Xudong Li, Baicheng Liu (2006). Numerical Simulation of Microstructure of Al-Si/SiCp Composites during Stir Casting Process with Particle Pushing Model. ISIJ International.DOI
  286. Baicheng Liu (2006). Numerical Simulation of Solidification Process of Cast Steel Investment Castings.
  287. Baicheng Liu (2006). 3D MICROSTRUCTURE SIMULATION OF AZ91D DIE CASTING MAGNESIUM ALLOY. Acta Metallurgica Sinica.
  288. 张焕鑫，沈厚发，柳百成（2005）. 大涡方法在板坯连铸结晶器湍流流场数值模拟中的应用. 《2005年全国计算材料、模拟与图像分析学术会议》.
  289. 李斌，许庆彦，李旭东，柳百成（2005）. 颗粒增强金属基复合材料凝固过程的数值模拟研究进展. 《特种铸造及有色合金》.
  290. 袁烺，熊守美，柳百成（2005）. 压室液态金属流动耦合温度场三维数值模拟. 《特种铸造及有色合金》.
  291. 张桂芳，沈厚发，王镭，柳百成（2005）. 结晶器电磁制动钢液流场数值模拟. 《铸造》.
  292. 张焕鑫，沈厚发，柳百成（2005）. 连续铸造板坯结晶器中流动与液位波动模拟研究. 《铸造》.
  293. 李斌，许庆彦，李旭东，柳百成（2005）. 用颗粒推移模型模拟Al-Si／SiCp复合材料微观组织. 《金属学报》.
  294. 曹海峰，沈厚发，柳百成（2005）. 侧向凝固通道偏析的数值模拟. 《金属学报》.
  295. 赵红兆，荆涛，柳百成（2005）. 铝合金三维枝晶生长相场模拟. 《金属学报》.
  296. 刘文辉，刘艳改，熊守美，柳百成，Y.Matsumoto，M.Murakami（2005）. 镁合金与铝合金压铸过程中型腔内压力的变化特性. 《金属学报》.
  297. 林新波，李荣先，柳百成，熊守美，张质良（2005）. 基于数值模拟的工艺评估与优化. 《塑性工程学报》.
  298. 朱昌盛，王智平，荆涛，柳百成（2005）. 二元合金非等温凝固相场法模拟. 《稀有金属材料与工程》.
  299. 柳百成（2005）. 铸造技术与计算机模拟发展趋势. 《铸造技术》.
  300. 于靖，许庆彦，柳百成（2005）. 熔模精密铸造凝固过程数值模拟的工程应用. 《第四届有色合金及特种铸造国际会议》.
  301. 张新平，熊守美，沈厚发，柳百成（2005）. 镁合金表面覆盖层形成方法及相关国家标准. 《材料科学与工艺》.
  302. 沈丙振，方能炜，沈厚发，柳百成（2005）. 低碳钢奥氏体再结晶模型的建立. 《材料科学与工艺》.
  303. 曹海峰，沈厚发，柳百成（2005）. Pb-Sn合金侧向凝固过程A偏析的数值模拟. 《材料研究学报》.
  304. Cao Hai-feng, Houfa Shen, Baicheng Liu (2005). NUMERICAL SIMULATION OF SEGREGATION IN CHANNEL DURING HORIZONTAL SOLIDIFICATION. Acta Metallurgica Sinica.
  305. Qing Yan Xu, Baicheng Liu, Zuo Jian Liang (2005). Modeling of Dendritic Structure during Solidification Process Based on Cellular Automaton Model. Materials science forum.DOI
  306. Wenhui Liu, Yan‐gai Liu, Xong Shou-mei, Baicheng Liu, Yasunobu Matsumoto, Mahoko Murakami (2005). COMPARATIVE STUDY OF THE CAVITY PRESSURE OF MAGNESIUM ALLOY AND ALUMINIUM ALLOY DURING DIE CASTING PROCESS. Acta Metallurgica Sinica.
  307. Baicheng Liu (2005). Development Trend of Casting Technique and Computer Simulation. Rejiagong gongyi.
  308. Baicheng Liu (2005). Numerical simulation on A-segregates during horizontal solidification in Pb-Sn alloy. Cailiao yanjiu xuebao.
  309. Baicheng Liu (2005). Characterization of Surface Films Formed on Molten Magnesium with Air and SF_6 as Protective Gases. Cailiao gongcheng.
  310. Baicheng Liu (2005). SIMULATION OF 3-D DENDRITIC GROWTH OF ALUMINUM ALLOY BY PHASE FIELD MODEL. Acta Metallurgica Sinica.
  311. Baicheng Liu (2005). Parallel domain decomposition algorithm based on Schwarz chaotic relaxation for die casting mold filling simulation. Journal of Tsinghua University(Science and Technology).
  312. 梁作俭，许庆彦，李嘉荣，袁海龙，刘世忠，柳百成（2004）. 单相合金凝固过程微观组织的三维数值模拟. 《金属学报》.
  313. 朱昌盛，王智平，荆涛，柳百成（2004）. 对流影响枝晶生长的相场法模拟研究进展. 《材料导报》.
  314. 刘文辉，熊守美，刘艳改，柳百成，侯骏，佟国侗，孙光波（2004）. 镁合金压铸件外观质量评定系统的研究. 《铸造》.
  315. 刘艳改，刘文辉，熊守美，柳百成（2004）. 工艺参数和型芯对AZ91D镁合金压铸充型能力的影响. 《铸造》.
  316. 朱昌盛，荆涛，柳百成，赵红兆（2004）. 热噪声促发枝晶侧向分支的相场法数值模拟. 《铸造》.
  317. 王罡，袁烺，熊守美，柳百成（2004）. 压室慢压射过程流场模拟. 《铸造》.
  318. 于靖，张新平，许庆彦，梁作俭，柳百成，张明豪，李锋军，周继红，刘艳（2004）. 基于熔模铸造模拟软件的铸钢件工艺优化. 《特种铸造及有色合金》.
  319. 柳百成（2004）. 展望世界铸造技术发展趋势. 《第六届中国铸造厂长（经理）国际会议论文集》.
  320. 刘文辉，刘艳改，熊守美，柳百成，王罡，侯骏，佟国侗，Y.Matsumoto，M.M.H.Kochi（2004）. 减速减压工艺对镁合金压铸件质量与性能的影响. 《中国有色金属学报》.
  321. 张新平，刘文辉，柳百成（2004）. 基于Matlab压铸镁合金气孔的定量分析. 《铸造》.
  322. 李朝霞，张雷，熊守美，柳百成（2004）. 镁合金压铸用模具的应力场和变形数值模拟. 《铸造》.
  323. 刘文辉，张新平，熊守美，柳百成（2004）. 基于分形理论及数理统计的压铸件内部孔洞缺陷定量分析. 《铸造》.
  324. 刘志勇，许庆彦，柳百成（2004）. 压铸工艺对镁合金组织性能影响的研究. 《铸造》.
  325. 李湘生，柳百成（2004）. 压铸模具系统浇道参数PQ2设计技术. 《铸造》.
  326. Baicheng Liu (2004). Finite element analysis of shell growth in a continuous casting mold. Journal of Tsinghua University(Science and Technology).
  327. Baicheng Liu (2004). Research on the Influence of Die Casting Process on Structure and Performance of Magnesium Alloy.
  328. Baicheng Liu (2004). Influence of Die Casting Parameters and Core on Mold-Filling Capacity of AZ91D Magnesium Alloy.
  329. Baicheng Liu (2004). The Numerical Simulation of Flow Field of the Slow Shot Phase in the Shot Sleeve.
  330. Baicheng Liu (2004). Analysis of Cavity Defects of Die Castings by Fractal Theory and Statistic Method.
  331. Baicheng Liu (2004). Quantitative Analysis of Pores for Die Casting Magnesium Alloys Based on Matlab.
  332. 柳百成，许庆彦 (2004). Advances on Microstructure Modeling of Solidification Process of Shape Casting. Tsinghua Science and Technology.
  333. 许庆彦，柳百成 (2004). Numerical Modeling of Dendrite Growth in Al Alloys. Tsinghua Science and Technology.
  334. 沈丙振，方能炜，沈厚发，柳百成 (2004). Static and Metadynamic Recrystallization of Low Carbon Steels During Mechanical Deformation. Tsinghua Science and Technology.
  335. 王镭，沈厚发，柳百成 (2004). Fluid Flow in Continuous Casting Mold with a Configured Nozzle. Tsinghua Science and Technology.
  336. 李朝霞，刘文辉，熊守美，柳百成（2003）. 镁合金压铸成形过程的数值模拟分析. 《第三届有色合金及特种铸造国际会议》.
  337. 梁作俭，许庆彦，李俊涛，李世琼，张继，柳百成，仲增墉（2003）. γ-TiAl增压涡轮熔模铸造过程数值模拟研究. 《稀有金属材料与工程》.
  338. 谭利坚，沈厚发，柳百成，刘晓，徐荣军，李永全（2003）. 连铸结晶器液位波动的数值模拟. 《金属学报》.
  339. 孙立斌，许庆彦，柳百成（2003）. ZG0Cr13Ni4Mo不锈钢铸件凝固相变过程的数值模拟. 《金属学报》.
  340. 李锋军，沈厚发，柳百成（2003）. 消失模铸造充型过程的模拟方法. 《金属学报》.
  341. 赵代平，荆涛，柳百成（2003）. 相场模型参数对枝晶形貌的影响. 《金属学报》.
  342. 王柯，闻星火，熊守美，柳百成（2003）. 低压铸造三维温度场的冷却边界条件处理. 《特种铸造及有色合金》.
  343. 梁作俭，许庆彦，李俊涛，李世琼，张继，柳百成，仲增墉（2003）. Ti-Al合金精密铸件微观缩松预测. 《金属学报》.
  344. 韩志强，柳百成（2003）. 垂直定向凝固条件下通道偏析形成过程的数值模拟. 《金属学报》.
  345. 李锋军，柳百成，沈厚发，禹建丽（2003）. 消失模铸造充型过程的人工神经网络算法. 《稀有金属材料与工程》.
  346. 李锋军，沈厚发，柳百成，张殿德（2003）. 消失模铸造液态金属充型速度的试验研究. 《材料科学与工艺》.
  347. 周进，沈丙振，韩志强，柳百成，吕敬东，朱涛（2003）. 精轧区热轧带钢温度场的数值模拟. 《钢铁研究学报》.
  348. 沈丙振，周进，韩志强，柳百成，佘广夫，吕敬东（2003）. 热轧带钢粗轧区轧件温度场的数值模拟. 《钢铁研究学报》.
  349. 许庆彦，柳百成（2003）. 铸造合金凝固组织的计算机模拟与预测. 《稀有金属材料与工程》.
  350. 张雷，谭利坚，沈厚发，黄天佑，柳百成，边敦亭，陈世文，潘爱胜，潘宁，王晓光（2003）. 大型轧钢机架铸造工艺计算机辅助分析. 《铸造》.
  351. 许庆彦，冯伟明，熊守美，柳百成（2003）. 1种新的模拟铝合金铸态组织的随机性方法. 《稀有金属材料与工程》.
  352. 冯伟明，许庆彦，柳百成（2003）. 铝合金微观组织模拟及并行计算. 《清华大学学报(自然科学版)》.
  353. 张光跃，荆涛，柳百成（2003）. 相场方法原理及在微观组织模拟中的应用. 《机械工程学报》.
  354. 孙立斌，许庆彦，柳百成（2003）. ZG0Cr13Ni4Mo不锈钢铸件微观组织的数值模拟. 《钢铁研究学报》.
  355. 李朝霞，刘文辉，熊守美，柳百成（2003）. 压铸镁合金模具温度场分布的研究. 《铸造》.
  356. 程万里，熊守美，柳百成（2003）. 低压铸造过程充型模拟简化模型的研究. 《铸造》.
  357. 沈丙振，周进，韩志强，柳百成（2003）. 热轧带钢温度场数值模拟研究现状. 《钢铁研究》.
  358. Ri Li, Mao Xie-min, Baicheng Liu, Wen-Zhen Li (2003). Application of layer-by-layer solidification principle to optimization of large chain wheel foundry technology. Journal of Shanghai University (English Edition).DOI
  359. Haidong Zhao, Baicheng Liu (2003). Simulation of microstructure formation of spheroidal graphite iron casting. International Journal of Cast Metals Research.DOI
  360. Lei Zhang, Houfa Shen, Tianyou Huang, Baicheng Liu (2003). Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction. International Journal of Cast Metals Research.DOI
  361. Xiangde Liu, Tao Jing, Baicheng Liu (2003). Study on the web-based casting CAE system. International Journal of Cast Metals Research.DOI
  362. Guangyue Zhang, Tao Jing, Baicheng Liu (2003). Microstructure simulation of aluminum alloy casting using phase field method. International Journal of Cast Metals Research.DOI
  363. Baicheng Liu (2003). INFLUENCE OF PHASE-FIELD PARAMETERS ON THE DENDRITE MORPHOLOGY. Acta Metallurgica Sinica.
  364. Gang Wang, Shoumei Xiong, Baicheng Liu, Sanli Li (2003). Parallel computation technique for mold filling simulation of die casting process by optimizing the computational parameters. International Journal of Cast Metals Research.DOI
  365. Baicheng Liu (2003). AN APPROACH FOR MOLD FILLING SIMULATION IN LOST FOAM CASTING. Acta Metallurgica Sinica.
  366. Baicheng Liu (2003). NUMERICAL SIMULATION OF PHASE TRANSFORMATION OF ZGOCrl3Ni4Mo STAINLESS STEEL CASTING. Acta Metallurgica Sinica.
  367. Baicheng Liu (2003). Microstructure simulation of aluminum alloy using parallel processors. Journal of Tsinghua University(Science and Technology).
  368. Baicheng Liu (2003). Numerical simulation of channel segregation in directional solidification. Journal of Tsinghua University(Science and Technology).
  369. Haidong Zhao, Baicheng LIU, I. Ohnaka (2003). Macro porosity prediction of SG iron castings considering microstructure formation. International Journal of Cast Metals Research.DOI
  370. 董树勇，许庆彦，熊守美，柳百成（2002）. 铝合金铸件微观孔洞演化模拟的研究. 《2002年中国材料研讨会》.
  371. 韩志强，沈厚发，熊守美，柳百成（2002）. Fe-C合金凝固过程流动、传热、传质的耦合数值模拟. 《金属学报》.
  372. 许庆彦，冯伟明，柳百成，熊守美（2002）. 铝合金枝晶生长的数值模拟. 《金属学报》.
  373. 韩志强，沈厚发，柳百成（2002）. 合金凝固过程的传输模型. 《金属学报》.
  374. 梁作俭，许庆产，李俊涛，李世琼，张继，柳百成，仲增墉（2002）. γ-ΤiAl增压涡轮近净形铸造过程实验研究. 《稀有金属材料与工程》.
  375. 张光跃，荆涛，柳百成，赵代平（2002）. 铝合金枝晶生长形貌数值模拟研究. 《铸造》.
  376. 李锋军，柳百成，沈厚发，张殿德（2002）. 消失模铸铁件充型速度的计算及其应用. 《特种铸造及有色合金》.
  377. 闻星火，荆涛，康进武，柳百成，王孝东，王培云，吕朔（2002）. 低压铸造凝固模拟中时间步长的实用算法. 《特种铸造及有色合金》.DOI
  378. 闻星火，熊守美，贾良容，柳百成（2002）. 低压铸造铝合金轮毂充型模拟实用研究. 《特种铸造及有色合金》.DOI
  379. 李锋军，林青松，柳百成（2002）. 铸铁件消失模铸造充型速度测试及主要影响因素. 《铸造》.
  380. 刘祥德，荆涛，柳百成（2002）. 基于WEB的铸造凝固过程数值模拟仿真系统. 《铸造》.
  381. 孙立斌，许庆彦，柳百成（2002）. ZG0Cr13Ni4Mo不锈钢铸件微观组织试验研究. 《铸造》.
  382. 梁作俭，许庆彦，李俊涛，李世琼，张继，柳百成，仲增墉（2002）. 钛铝合金精密铸件微观缩松预测研究. 《2002年材料科学与工程新进展（下）——2002年中国材料研讨会论文集》.
  383. 张光跃，荆涛，柳百成（2002）. 用相场方法模拟铝合金枝晶生长形貌. 《中国有色金属学报》.
  384. Weiming Feng, Qingyan Xu, Baicheng Liu (2002). Microstructure Simulation of Aluminum Alloy Using Parallel Computing Technique. ISIJ International.DOI
  385. Guangyue Zhang, Tao Jing, Baicheng Liu, Daiping Zhao (2002). Numerical Simulation of Microstructure of Aluminum Alloy Casting Using Macro-Micro Coupled Method.DOI
  386. Baicheng Liu (2002). TRANSPORT MODELS FOR ALLOY SOLIDIFICATION. Acta Metallurgica Sinica.
  387. Baicheng Liu (2002). NUMERICAL SIMULATION ON FLUID FLOW, HEAT AND MASS TRANSFER IN SOLIDIFICATION OF Fe-C ALLOYS. Acta Metallurgica Sinica.
  388. 赵海东，柳百成，房贵如，熊守美（2001）. 球墨铸铁中白口共晶形成的数值模拟. 《金属学报》.
  389. 柳百成，熊守美（2001）. 并行工程环境下铸造CAE技术的研究. 《第二届有色金属及铸造国际会议论文集》.
  390. 李日，谈雪华，金志宏，蔡常林，李荣华，柳百成，赵继成，李文珍（2001）. 船用柴油机链轮的铸造工艺数值模拟优化及生产试制. 《铸造》.
  391. 康宽滋，王瑞平，赵海东，柳百成（2001）. 球墨铸铁轮毂的缩孔形成模拟和工艺改进. 《铸造》.
  392. 李锋军，柳百成，张殿德（2001）. 消失模铸造球墨铸铁件收缩缺陷计算机模拟的处理方法. 《铸造》.
  393. Zhiqiang Han, Kaike Cai, Baicheng Liu (2001). Prediction and Analysis on Formation of Internal Cracks in Continuously Cast Slabs by Mathematical Models. ISIJ International.DOI
  394. Haidong Zhao, Baicheng Liu (2001). Modeling of Stable and Metastable Eutectic Transformation of Spheroidal Graphite Iron Casting. ISIJ International.DOI
  395. 柳百成（2000）. 铸件凝固过程的宏观及微观模拟仿真研究进展. 《中国工程科学》, Vol. 2, No. 9.下载原文
  396. 许庆彦，柳百成（2000）. 采用Cellular Automaton法模拟铝合金的微观组织. 《第一届国际机械工程学术会议》.
  397. 张光跃，熊守美，柳百成，许庆彦，孙立斌，张殿德，李峰军（2000）. 铸件充型过程数值模拟的实验验证及工程应用. 《铸造》.
  398. 李日，柳百成，王友序，杨根仓（2000）. 薄壁件反重力充型的Simple-守恒标量法数值模拟研究. 《铸造》.
  399. 许庆彦，张光跃，李锋军，熊守美，柳百成，张殿德（2000）. 用快速数据采集系统研究铸件充型过程. 《特种铸造及有色合金》.
  400. 柳百成，沈厚发（2000）. 面向21世纪的铸造技术. 《特种铸造及有色合金》.DOI
  401. 孙方斌，许庆彦，柳百成，张文峰，彭尚品（2000）. 大型铸钢件补浇工艺的凝固模拟研究. 《特种铸造及有色合金》.
  402. 孙立斌，张光跃，柳百成，张殿德，李峰军（2000）. 考虑对流和辐射的铸件凝固过程研究. 《铸造》.
  403. 康进武，熊守美，柳百成（2000）. 采用多热节和即缩即补方法预测铸钢件缩孔的研究. 《铸造》.
  404. Baicheng Liu (2000). Physical Metallurgy and Modeling/Simulation of Next Generation Net Shape Casting Technology. Zhongguo jixie gongcheng.
  405. 许庆彦，柳百成，熊守美（1999）. 32通道快速数据采集和管理系统的研制. 《中国铸造装备与技术》.
  406. 康进武，熊守美，柳百成（1999）. 铸钢应力框凝固过程三维应力数值模拟. 《铸造》.
  407. 赵海东，柳百成，房贵如（1999）. 球墨铸铁微观组织数值模拟及其力学性能的研究进展. 《铸造》.
  408. 柳百成（1999）. 铸件充型凝固过程数值模拟国内外研究进展. 《铸造》.
  409. 汤亚力，沈宁福，柳百成，关绍康，袁新（1999）. Fe含量对快凝铝铁合金凝固过程的影响. 《中国有色金属学报》.
  410. 闻星火，康进武，熊守美，柳百成（1999）. 低压铸造铝合金轮毂充型与凝固模拟. 《中国有色金属学报》.
  411. 李永保，柳百成，邱伟 (1999). Numerical Simulation System for Casting Process in Concurrent Engineering. Tsinghua Science and Technology.
  412. 李嘉荣，柳百成，刘睿（1998）. G/R1/2法在球铁件缩孔缩松预测中的应用研究. 《铸造》.
  413. 李永保，柳百成（1998）. 基于IDEAS的三维有限差分网格自动剖分. 《中国铸造装备与技术》.
  414. 闻星火，童本行，柳百成，王孝东，王培云，金胜灿（1998）. 基于柱坐标系的充型与凝固模拟系统的开发. 《特种铸造及有色合金》.DOI
  415. 康进武，熊守美，柳百成（1998）. 铸件热裂数值模拟研究进展. 《铸造》.
  416. 白雪峰，陈瑶，柳百成（1998）. 基于AutoCAD AME的有限差分网格划分. 《智能制造》.
  417. 吴亮，熊守美，柳百成（1998）. 应用分数步长法进行压铸过程温度场数值模拟研究. 《铸造》.
  418. 陈瑶，白雪峰，朱日明，柳百成（1997）. 铸造过程应力场数值模拟集成化技术的研究. 《铸造》.
  419. 贾宝仟，柳百成，王东涛（1997）. 铸钢件准固态区域应力、应变数值模拟及热裂机制. 《金属学报》.
  420. 荆涛，熊伟，闻星火，柳百成（1997）. 微机在铸造工艺与设备中的应用 第二讲 微机在液态金属充填型腔和铸件凝固过程数值模拟中的应用(2). 《中国铸造装备与技术》.
  421. 贾宝仟，柳百成（1997）. Al-5%Cu合金准固态区域凝固时间与残余应力的关系. 《特种铸造及有色合金》.DOI
  422. 高志强，王春乐，邱伟，柳百成（1997）. 考虑充型过程的铸钢件缩孔缩松预测研究. 《机械工程学报》.
  423. 闻星火，柳百成，王孝东，王培云（1997）. 低压铸造铝合金轮毂的凝固模拟及实验验证. 《中国铸造装备与技术》.
  424. 荆涛，闻星火，柳百成（1997）. 微机在铸造工艺与设备中的应用第二讲微机在液态金属充填型腔和铸件凝固过程数值模拟中的应用(1). 《中国铸造装备与技术》.
  425. 李永保，荆涛，柳百成（1997）. 微机在铸造工艺与设备中的应用第一讲微机在铸造工艺CAD中的应用. 《中国铸造装备与技术》.
  426. 闻星火，荆涛，贾宝仟，柳百成，王孝东，王培云，杨文杰（1997）. 基于柱坐标系的凝固模拟系统研究. 《铸造》.
  427. 邱伟，沈厚发，高志强，白雪峰，柳百成（1997）. 耦合传热与流动的铝合金铸件充型三维数值模拟. 《铸造》.
  428. Baicheng Liu, R. Zhu, Shi Jie Xiong, Yi Gao, Yunchu Zhang (1997). Residual Stress Computation and Analysis of Machine Tool Bed Casting. Advanced materials research.DOI
  429. Baicheng Liu, Jian Li, R. Liu (1997). A New Shrinkage Cavity Prediction Method for Solidification Simulation of S.G. Iron Casting. Advanced materials research.DOI
  430. 张卫善，熊守美，柳百成（1996）. 压力铸造三维温度场数值模拟研究. 《特种铸造及有色合金》.
  431. 仝兴存，沈宁福，柳百成（1996）. 快速凝固Al94Ti4C2合金的显微组织和相结构分析. 《航空学报》.
  432. 闻星火，童本行，柳百成，王孝东，王培云，何丙军（1996）. 低压铸造铝合金轮毂模具温度场的测试. 《特种铸造及有色合金》.
  433. Xiong Shou-mei, Baicheng Liu, Zhu Riming, Gao Ying (1996). Numerical simulation and analysis of residual stress in machine tool bed casting. Tsinghua Science & Technology.
  434. 柳百成（1993）. 参加第一届亚洲铸造会议观感. 《铸造》.
  435. 王君卿，柳百成，周尧和（1992）. 参加第58届世界铸造会议技术工作总结. 《铸造》.
  436. 荆涛，雷霆，柳百成，顾祖希，游军，杨学厚，霍恩全（1992）. 离心铸造复合轧辊凝固过程的数值模拟和微机监控. 《铸造技术》.
  437. 王冬生，柳百成，芮争家，陈鹤涛，张祖临（1991）. 锡、铜促进球铁基体珠光体化. 《铸造技术》.
  438. 李言祥，柳百成（1991）. 定向凝固条件下亚共晶铸铁凝固特性的研究. 《铸造》.
  439. 柳百成，熊守美（1991）. 微型计算机多通道数据采集系统及其在铸造中的应用. 《铸造技术》.
  440. 程军，柳百成（1991）. 铸件铸型界面热交换参数的通用化处理. 《铸造》.
  441. 郭景杰，李庆春，贾均，柳百成，周昌炽（1991）. 铸铁激光表面重熔过程中表面涂层的作用. 《材料科学与工艺》.
  442. 刘长锁，丁能续，柳百成，芮争家，付江，白天申（1990）. 新型型内孕育块的研制与应用. 《铸造》.
  443. 郭景杰，柳百成，周昌炽（1990）. 不同基体球铁的激光表面重熔组织. 《材料科学与工艺》.
  444. 裴清祥，白天申，柳百成，李德华，刘冲林（1989）. 计算机在中小型球铁件浇冒口设计中的应用. 《铸造技术》.
  445. 王冬生，柳百成，芮争家，陈鹤涛，张祖临（1989）. 铸态珠光体球铁QT800—2的试制研究. 《铸造》.
  446. 陈驾宇，程军，张卓其，柳百成（1988）. 凝固过程中金属和铸型界面间隙及其换热条件的研究. 《铸造》.
  447. 李言祥，柳百成（1988）. 晶体生长的初始成分过渡区. 《金属学报》.
  448. 周昭喜，柳百成（1987）. 透射电镜在铸铁基础研究中的应用. 《铸造》.
  449. 柳百成（1987）. 参加第53届国际铸造会议技术总结. 《铸造》.
  450. 柳百成（1986）. 球墨铸铁国际标准及对提高我国球铁生产水平的几点看法. 《铸造》.
  451. 周昭喜，柳百成，吴德海（1986）. 几种孕育块对球墨铸铁的孕育效果. 《铸造技术》.
  452. 柳百成（1984）. 用电子探针研究铸铁中磷的偏析. 《铸造》.

书籍章节

  1. Cong Yang, Qingyan Xu, Baicheng Liu (2019). Study of Dendrite Growth Under Forced Convection in Superalloy Solidification by Multiphase-Field Coupled Lattice Boltzmann Method. ˜The œminerals, metals & materials series.DOI
  2. Jinwu Kang, Chi Zhang, Chao Dong, Houfa Shen, Baicheng Liu (2017). Water Analogy Experiment on the Multi-concentration Pouring Process of a 585 Ton Steel Ingot. Springer eBooks.DOI
  3. Jing-an Yang, Zhenhu Duan, Houfa Shen, Baicheng Liu (2017). Validation of CAFE Model with Experimental Macroscopic Grain Structures in a 36-Ton Steel Ingot. ˜The œminerals, metals & materials series.DOI
  4. Xuewei Yan, Wei Li, Lei Jiang Yao, Xin Xue, Yanbin Wang, Gang Yao Zhao, Jun‐Tao Li, Qingyan Xu, Baicheng Liu (2017). Numerical Simulation of Meso-Micro Structure in Ni-Based Superalloy During Liquid Metal Cooling Process. ˜The œminerals, metals & materials series.DOI
  5. John E. Allison, Baicheng Liu, Kevin P. Boyle, Lou Hector, R.C. McCune (2016). Integrated Computational Materials Engineering for Magnesium in Automotive Body Applications. Springer eBooks.DOI
  6. Rui Chen, Qingyan Xu, Zhiyuan Xia, Huiting Guo, Qinfang Wu, Baicheng Liu (2016). An Integrated Model for Prediction of Yield Stress in Al-7Si-Mg Cast Alloys. Springer eBooks.DOI
  7. Yufeng Shi, Qingyan Xu, Rui Chen, Baicheng Liu, Qinfang Wu, Hongwei Yang (2013). A Microstructure-Strength Calculation Model for Predicting Tensile Strength of AlSi7Mg Alloy Castings. John Wiley & Sons, Inc. eBooks.DOI
  8. Zhenhu Duan, Houfa Shen, Baicheng Liu (2013). Numerical Simulation of Solidification and Macrosegregation in Water Cooled Heavy Steel Ingot. Springer eBooks.DOI
  9. Yanda Li, Zhiqiang Han, Alan A. Luo, Anil K. Sachdev, Baicheng Liu (2013). Study on Microstructure and Mechanical Property of Squeeze Casting Az91d Magnesium Alloy. Springer eBooks.DOI
  10. Hang Zhang, Qingyan Xu, Baicheng Liu (2013). Fuzzy Controlling Withdrawal Technology by Numerical Simulation to Optimize Directional Solidification Process of Superalloy Casting. Springer eBooks.DOI

书籍

  1. Laurentiu Nastac, Baicheng Liu, Hasse Fredriksson, Jacques Lacaze, Chun-Pyo Hong, Adrian V. Catalina, Andreas Bührig–Polaczek, Charles A. Monroe, Adrian S. Sabau, Roxana Ruxanda, Alan A. Luo, Subhayu Sen, Attila Diószegi (2016). Advances in the Science and Engineering of Casting Solidification. Springer eBooks.DOI

研究方向

金属学及金属工艺冶金工业航空航天科学与工程

此主页由公开资料整理，尚未经学者本人认领。