焦雪艳｜山东交通学院｜学者主页

期刊论文

2026

聚氨酯橡胶介质下铝蜂窝板弯曲与回弹行为

杨鑫晖，焦雪艳，崔漪文，马俊飞，杜冲，张文丛，初冠南，杨建雷，殷正正

《塑性工程学报》

2026

Damage mechanisms of high-temperature titanium alloy laser-welded joints during hot deformation: A multiscale in situ study

Di Wu, Kehuan Wang, Rui Ding, Xueyan Jiao, Gang Liu

Chinese Journal of Aeronautics

DOI

2025

Compression Behavior and Simulation of 6A02 Honeycomb Aluminum Panel

Jian-Lei Yang, Jianghao Song, Yuxin Li, Wen-cong Zhang, Xueyan Jiao

Journal of materials engineering and performance (Print)

DOI

2025

Study on Arrhenius Constitutive Model of Ti-22Al-24Nb-0.5Mo Alloy Based on Strain Compensation

Li-Ye Xie, Xueyan Jiao

Academic Journal of Materials & Chemistry

DOI

2023

Microstructure evolution and strengthening mechanisms of electron beam welded 2219 aluminum alloy plate after hot spinning and heat treatment

Jian-Lei Yang, Jianghao Song, Jinqiu Pan, Xiaobo Wang, Li Zhou, Gaungda Sun, Wen-cong Zhang, Xueyan Jiao

Journal of Materials Research and Technology

DOI

2022

Ti2AlNb金属间化合物薄壁构件虚拟塑性加工系统

刘志强，祝世强，赵杰，焦雪艳，王东君，武永，刘钢

《航天制造技术》

2022

Hot Gas Pressure Forming and Post Aging Treatment of Ti-22Al-24.5Nb-0.5Mo Square Tubes

Zhi-Qiao Liu, Xueyan Jiao, Dong-Jun Wang, Shi-Qiang Zhu, Da-Gang Wang, Gang Liu

Journal of materials engineering and performance (Print)

DOI

2022

Superplastic behavior and microstructure evolution of a fine-grained Mg-Nd-Zn-Zr alloy processed by hot extrusion

Liqiang Zhan, Guangjie Xue, Jian-Lei Yang, Wen-cong Zhang, Xueyan Jiao, Gang Wang, Guo-Feng Wang

Materials Science & Engineering: A

DOI

2022

The Microstructural Evolution and Grain Growth Kinetics of Fine-Grained Extruded Mg-Nd-Zn-Zr Alloy

Xueyan Jiao, Xinjie Li, Liqiang Zhan, G. Wang, Jin Ding, Jian-Lei Yang

Materials

DOI

2019

Microstructure evolution and high-temperature tensile behavior of the powder extruded 2.5 vol% TiBw/TA15 composites

Xueyan Jiao, Wen-Zhen Chen, Jian-Lei Yang, Wen-cong Zhang, Guo-Feng Wang

Materials Science & Engineering: A

DOI

2019

Microstructure analysis on enhancing mechanical properties at 750 °C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming

Xueyan Jiao, Dong-Jun Wang, Jian-Lei Yang, Zhi-Qiao Liu, Gang Liu

Journal of Alloys and Compounds

DOI

2018

Dynamic spheroidisation behaviour of the lamellar Ti–22Al–25Nb alloy during hot compression

Jian-Lei Yang, Guo-Feng Wang, Xueyan Jiao, You-Tang Li, Kai-Feng Zhang

DOI

2018

High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy

Jian-Lei Yang, Guo-Feng Wang, Xueyan Jiao, You-Tang Li, Qing Liu

DOI

2018

Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of 2.5 vol% TiBw/TA15 Composites with Different Deformation Statuses

Xueyan Jiao, Dandan Du, Wen-Zhen Chen, Wen-cong Zhang, Jian-Lei Yang, Guo-Rong Cui

Advanced Engineering Materials

DOI

2018

Prediction of microstructure evolution during hot gas forming of Ti2AlNb-based alloy tubular component with square cross-section

Zhi-Qiao Liu, Xiaosong Wang, Xueyan Jiao, Yong Wu, Gang Liu

DOI

2018

Investigation on precision and performance for hot gas forming of thin-walled components of Ti2AlNb-based alloy

Xueyan Jiao, Zhi-Qiao Liu, Yong Wu, Gang Liu

DOI

2018

Current-Assisted Diffusion Bonding of Extruded Ti-22Al-25Nb Alloy by Spark Plasma Sintering: Interfacial Microstructure and Mechanical Properties

Jian-Lei Yang, Guo-Feng Wang, Xueyan Jiao, Yi-Bin Gu, Qing Liu, You-Tang Li

Journal of materials engineering and performance (Print)

DOI

2017

元素粉末冶金法で作製したTi22Al25Nb1 1.0B合金の高温変形挙動及びミクロ組織の発達【Powered by NICT】

Jian-Lei Yang, Guo-Feng Wang, Xueyan Jiao, Xiao Li, Chao Yang

2017

Creep behavior and effects of heat treatment on creep resistance of Ti-22Al-24Nb-0.5Mo alloy

Xueyan Jiao, Gang Liu, Dong-Jun Wang, Yong Wu

DOI

2017

Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion

Jian-Lei Yang, G.-F. Wang, W.-C. Zhang, Wen-Zhen Chen, Xueyan Jiao, Ke-Zhao Zhang

DOI

2017

A Novel Extrusion for Manufacturing TiBw/Ti6Al4V Composite Tubes with a Quasi-Continuous Reinforced Structure

Jian-Lei Yang, Xueyan Jiao, Wen-Zhen Chen, Wen-cong Zhang, Guo-Feng Wang

Materials

DOI

2017

Hot deformation behavior and microstructural evolution of Ti22Al25Nb1.0B alloy prepared by elemental powder metallurgy

Jian-Lei Yang, Guo-Feng Wang, Xueyan Jiao, Xiao Li, Chaozhi Yang

DOI

2017

Ti22Al24Nb O‐0.5Mo合金のクリープ抵抗に及ぼす熱処理のクリープ挙動と効果【Powered by NICT】

Xueyan Jiao, Gang Liu, Dong-Jun Wang, Yong Wu

2017

Effects of annealing on microstructure and deformation uniformity of Ti-22Al-24Nb-0.5Mo laser-welded joints

Xueyan Jiao, Beibei Kong, W. Tao, Gang Liu, H. Ning

DOI

2016

Microstructure and mechanical properties of Ti–22Al–25Nb alloy fabricated by elemental powder metallurgy

Guo-Feng Wang, Jian-Lei Yang, Xueyan Jiao

DOI

2015

Research on heat treatment of TiBw/Ti6Al4V composites tubes

Yang Yu, Wen-cong Zhang, Wen-Yong Dong, Xiuzhu Han, C. Pei, Xueyan Jiao, Yangju Feng

DOI

2014

3.5vol.%TiBw/TC4复合材料细管热挤压-旋锻复合工艺研究

焦雪艳

《哈尔滨工业大学》

2014

Microstructure and Properties of 3.5 vol.% TiBw/Ti6Al4V Composite Tubes Fabricated by Hot-hydrostatic Extrusion

Wen-cong Zhang, Xueyan Jiao, Yang Yu, Jian-Lei Yang, Yangju Feng

DOI

会议论文

2017

Ti-22Al-24Nb-0.5Mo方形截面管热态气压成形及组织性能研究

焦雪艳，刘钢

《创新塑性加工技术，推动智能制造发展——第十五届全国塑性工程学会年会暨第七届全球华人塑性加工技术交流会学术会议论文集》

焦雪艳

精选作品

期刊论文

聚氨酯橡胶介质下铝蜂窝板弯曲与回弹行为

Damage mechanisms of high-temperature titanium alloy laser-welded joints during hot deformation: A multiscale in situ study

Compression Behavior and Simulation of 6A02 Honeycomb Aluminum Panel

Study on Arrhenius Constitutive Model of Ti-22Al-24Nb-0.5Mo Alloy Based on Strain Compensation

Microstructure evolution and strengthening mechanisms of electron beam welded 2219 aluminum alloy plate after hot spinning and heat treatment

Ti2AlNb金属间化合物薄壁构件虚拟塑性加工系统

Hot Gas Pressure Forming and Post Aging Treatment of Ti-22Al-24.5Nb-0.5Mo Square Tubes

Superplastic behavior and microstructure evolution of a fine-grained Mg-Nd-Zn-Zr alloy processed by hot extrusion

The Microstructural Evolution and Grain Growth Kinetics of Fine-Grained Extruded Mg-Nd-Zn-Zr Alloy

Microstructure evolution and high-temperature tensile behavior of the powder extruded 2.5 vol% TiBw/TA15 composites

Microstructure analysis on enhancing mechanical properties at 750 °C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming

Dynamic spheroidisation behaviour of the lamellar Ti–22Al–25Nb alloy during hot compression

High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy

Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of 2.5 vol% TiBw/TA15 Composites with Different Deformation Statuses

Prediction of microstructure evolution during hot gas forming of Ti2AlNb-based alloy tubular component with square cross-section

Investigation on precision and performance for hot gas forming of thin-walled components of Ti2AlNb-based alloy

Current-Assisted Diffusion Bonding of Extruded Ti-22Al-25Nb Alloy by Spark Plasma Sintering: Interfacial Microstructure and Mechanical Properties

元素粉末冶金法で作製したTi22Al25Nb1 1.0B合金の高温変形挙動及びミクロ組織の発達【Powered by NICT】

Creep behavior and effects of heat treatment on creep resistance of Ti-22Al-24Nb-0.5Mo alloy

Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion

A Novel Extrusion for Manufacturing TiBw/Ti6Al4V Composite Tubes with a Quasi-Continuous Reinforced Structure

Hot deformation behavior and microstructural evolution of Ti22Al25Nb1.0B alloy prepared by elemental powder metallurgy

Ti22Al24Nb O‐0.5Mo合金のクリープ抵抗に及ぼす熱処理のクリープ挙動と効果【Powered by NICT】

Effects of annealing on microstructure and deformation uniformity of Ti-22Al-24Nb-0.5Mo laser-welded joints

Microstructure and mechanical properties of Ti–22Al–25Nb alloy fabricated by elemental powder metallurgy

Research on heat treatment of TiBw/Ti6Al4V composites tubes

3.5vol.%TiBw/TC4复合材料细管热挤压-旋锻复合工艺研究

Microstructure and Properties of 3.5 vol.% TiBw/Ti6Al4V Composite Tubes Fabricated by Hot-hydrostatic Extrusion

会议论文

Ti-22Al-24Nb-0.5Mo方形截面管热态气压成形及组织性能研究

研究方向

精选作品

期刊论文

聚氨酯橡胶介质下铝蜂窝板弯曲与回弹行为

Damage mechanisms of high-temperature titanium alloy laser-welded joints during hot deformation: A multiscale in situ study

Compression Behavior and Simulation of 6A02 Honeycomb Aluminum Panel

Study on Arrhenius Constitutive Model of Ti-22Al-24Nb-0.5Mo Alloy Based on Strain Compensation

Microstructure evolution and strengthening mechanisms of electron beam welded 2219 aluminum alloy plate after hot spinning and heat treatment

Ti2AlNb金属间化合物薄壁构件虚拟塑性加工系统

Hot Gas Pressure Forming and Post Aging Treatment of Ti-22Al-24.5Nb-0.5Mo Square Tubes

Superplastic behavior and microstructure evolution of a fine-grained Mg-Nd-Zn-Zr alloy processed by hot extrusion

The Microstructural Evolution and Grain Growth Kinetics of Fine-Grained Extruded Mg-Nd-Zn-Zr Alloy

Microstructure evolution and high-temperature tensile behavior of the powder extruded 2.5 vol% TiBw/TA15 composites

Microstructure analysis on enhancing mechanical properties at 750 °C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming

Dynamic spheroidisation behaviour of the lamellar Ti–22Al–25Nb alloy during hot compression

High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy

Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of 2.5 vol% TiBw/TA15 Composites with Different Deformation Statuses

Prediction of microstructure evolution during hot gas forming of Ti2AlNb-based alloy tubular component with square cross-section

Investigation on precision and performance for hot gas forming of thin-walled components of Ti2AlNb-based alloy

Current-Assisted Diffusion Bonding of Extruded Ti-22Al-25Nb Alloy by Spark Plasma Sintering: Interfacial Microstructure and Mechanical Properties

元素粉末冶金法で作製したTi22Al25Nb1 1.0B合金の高温変形挙動及びミクロ組織の発達【Powered by NICT】

Creep behavior and effects of heat treatment on creep resistance of Ti-22Al-24Nb-0.5Mo alloy

Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion

A Novel Extrusion for Manufacturing TiBw/Ti6Al4V Composite Tubes with a Quasi-Continuous Reinforced Structure

Hot deformation behavior and microstructural evolution of Ti22Al25Nb1.0B alloy prepared by elemental powder metallurgy

Ti22Al24Nb O‐0.5Mo合金のクリープ抵抗に及ぼす熱処理のクリープ挙動と効果【Powered by NICT】

Effects of annealing on microstructure and deformation uniformity of Ti-22Al-24Nb-0.5Mo laser-welded joints

Microstructure and mechanical properties of Ti–22Al–25Nb alloy fabricated by elemental powder metallurgy

Research on heat treatment of TiBw/Ti6Al4V composites tubes

3.5vol.%TiBw/TC4复合材料细管热挤压-旋锻复合工艺研究

Microstructure and Properties of 3.5 vol.% TiBw/Ti6Al4V Composite Tubes Fabricated by Hot-hydrostatic Extrusion

会议论文

Ti-22Al-24Nb-0.5Mo方形截面管热态气压成形及组织性能研究

研究方向

Microstructure evolution and high-temperature tensile behavior of the powder extruded 2.5 vol% TiBw/TA15 composites

Microstructure analysis on enhancing mechanical properties at 750 °C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming