李兰云｜西安石油大学｜学者主页

2026

高温合金薄壁V型密封环滚压成形工艺研究

王涛，刘静，李兰云，朱哲毅

《精密成形工程》

2025

仪器化压痕拉伸性能测试技术发展现状与展望

郭宇，高雄雄，徐华天，李兰云，陈建，钟婷，杨悦，陈宏远

《石油管材与仪器》

DOI

2024

钛合金在油气开采中的应用及研究现状

赵恒，李兰云，辛超，赵彬

《热加工工艺》

2024

N、Nb合金化对309S奥氏体不锈钢腐蚀性能的影响

王聪，王春妮，刘后龙，刘星辰，李兰云，宰伟，余中狄

《表面技术》

2024

不同Cl-浓度下SRB对抗微生物腐蚀管材性能的影响

丁浪勇，赵国仙，刘冉冉，张思琦，宋洋，王映超，张雅妮，胥聪敏，李兰云

《焊管》

2024

高熵合金吸波材料的研究进展

赵金强，李兰云，张蔚冉，赵国仙

《中国材料进展》

2024

塑性成形工艺及模具设计课程教学改革

刘静，李兰云，胥珊娜，徐向前，曹伟锋，李光

《西部素质教育》

2024

Precise Lattice‐Strain Modulation of Hematite Enabled by Gradient Doping of Mn for Enhanced Photoelectrocatalytic Oxidative C─C Bond Scission

Lanyun Li, Pei-dong Wu, Wenliu Li, Jinshu Huang, Hu Li, Song Yang

Small Structures

DOI

2024

Interfacial high-valence Ni(IV)-enabled C-H activation for photoelectrochemical C-C bond cleavage of lignin to exclusively produce aromatic carboxylic acids

Pei-dong Wu, Lanyun Li, Hu Li, Zhen Fang

Chemical Engineering Journal

DOI

2024

Biomass valorization via electrocatalytic carbon–carbon bond cleavage

Keping Wang, Zhenyan Guo, Min Zhou, Ying Yang, Lanyun Li, Hu Li, Rafael Luque, S. Saravanamurugan

Journal of Energy Chemistry

DOI

2023

结构尺寸对316L矩形波纹管液压胀形的影响

陈立强，刘静，刘健，李兰云，葛前，左星煜

《精密成形工程》

2023

OBE视域下“工程材料及成形技术”教改实践研究

李健，周勇，胥珊娜，李兰云，董会

《广州化工》

2023

基于Python和Abaqus的波纹管力学性能分析软件开发

秦晓晨，刘静，何进，李兰云

《重型机械》

2023

考虑成形与循环滞后的波纹管疲劳寿命研究

郜慧广，刘静，高亚东，李兰云

《重型机械》

2023

Ti-3Ta-xNb合金在沸腾硝酸中的电化学腐蚀研究

荣宇航，朱杰，吴金平，谢龙飞，李兰云

《钛工业进展》

2023

Non-quantum nanostructures-enabled hot carriers generation for enhancive photoelectrocatalytic oxidation of bio-alcohol in water coupled with hydrogen evolution

Peikun Wu, Lanyun Li, Keping Wang, Hu Li, Zhen Fang

Green Chemistry

DOI

2022

高温合金矩形波纹管液压胀形变形特征

吕志勇，刘静，李兰云，左星煜，李懿曌

《塑性工程学报》

2022

矩形金属波纹管机械胀形工艺仿真分析

高亚东，刘静，左星煜，李兰云

《压力容器》

2022

多层高温合金波纹管液压胀形波高精确控制

刘健，李亮，刘静，李兰云

《塑性工程学报》

2021

不同热煨工艺对X80级弯管焊接粗晶区组织和性能的影响

牛辉，杜江，李兰云，张万鹏，杨耀彬

《热加工工艺》

DOI

2021

双金属复合管液压胀形工艺参数的优化设计

张阁，李兰云，肖彦英

《热加工工艺》

DOI

2021

板厚对T2紫铜板U形弯曲回弹的影响

李光，刘静，李兰云，胥聪敏，董会

《模具制造》

2021

析出相对铝基牺牲阳极组织及电化学性能的影响

朱王科，李兰云，董会，韩燕，任康

《热加工工艺》

2021

Geometric imperfections of large diameter and thick-walled pipe fabricated by push bending with induction heating

Lanyun Li, Yang Zhang, Jing Liu, Shuaishuai Xu, Xiao-Guang Fan

The International Journal of Advanced Manufacturing Technology

DOI

2021

Numerical investigation of the effect of material properties on forming metal bellows

Jing Liu, Yang Liu, Lanyun Li, Jian Liu

The International Journal of Advanced Manufacturing Technology

DOI

2020

J55 LC套管断裂失效原因分析

曾锋，杨专钊，李德君，李兰云

《焊管》

DOI

2020

Deformation behaviors of four-layered U-shaped metallic bellows in hydroforming

Jing Liu, Zhiyong Lv, Yang Liu, Lanyun Li

DOI

2019

内部控制与企业社会责任履行——基于代理成本的中介效应检验

李兰云，王宗浩，阚立娜

《南京审计大学学报》，Vol. 16, No. 1

下载原文

2019

基于雨课堂的《材料成型原理》课程教学改革研究与实践

李兰云，李霄，刘静，李凯

《高教学刊》

DOI

2019

材料成型卓越人才自主探究性培养模式研究与实践

李兰云，李霄，刘静，董会

《高教学刊》

DOI

2019

初始间隙对双金属复合管液压成形的影响研究

李兰云，张阁，刘静，李霄

《热加工工艺》

DOI

2018

厚壁热煨弯管局部感应加热推弯成形技术研究现状

李兰云，徐帅帅，张阁，刘静，李霄

《热加工工艺》

2018

大口径厚壁弯管的局部感应加热推弯成形的有限元建模研究

李兰云，徐帅帅，张阁，刘静，李霄

《热加工工艺》

2018

“Size effect” related hydroforming characteristics of thin-walled 316-L bellow considering pressure change

Jing Liu, Hong-Wei Li, Yang Liu, Lanyun Li, Can Sun

The International Journal of Advanced Manufacturing Technology

DOI

2017

工艺参数对双层304不锈钢波纹管液压胀形回弹的影响

刘静，王有龙，李兰云，李霄

《锻压技术》

DOI

2017

层数对不锈钢波纹管液压胀形影响研究

刘静，王有龙，李兰云，李霄

《重型机械》

2017

工艺参数对双层304不锈钢波纹管液压胀形的影响

刘静，王有龙，李兰云，李霄

《塑性工程学报》

2017

Springback behaviors of bi-layered non-homogeneous bellows in hydroforming

Jing Liu, Yang Liu, Lanyun Li, Xiao Li

The International Journal of Advanced Manufacturing Technology

DOI

2016

金属塑性成形有限元数值模拟

李兰云

《中国石化出版社》

2016

A quantitative planning method of variable feed rates for cold profiled ring rolling process

Lanyun Li, Xiao Li, Jing Liu, Zhi-Zhu He

The International Journal of Advanced Manufacturing Technology

DOI

2016

Effects of roll sizes on uniformity of strain and variation of configuration in cold-closed T-shaped rolling process of HE30 aluminum alloy ring

Lanyun Li, Xiao Li, Jing Liu, Zhi He

DOI

2016

Anisotropic and asymmetrical yielding and its distorted evolution: Modeling and applications

Heng Li, X. Hu, H. Yang, Lanyun Li

DOI

2015

Multi–response optimisation design of parameters for cold ring rolling process using fuzzy–grey method

Lanyun Li, Xiao Li, Jing Liu, Zhi He

DOI

2015

Springback Analysis of Thin-Walled Stainless Steel Bellow in Hydroforming

Jing Liu, Yang Liu, Lanyun Li, Xiao Li, Shao-Fei Yang, Yan-Hai Geng, Fei-Yan Liu

DOI

2015

Radius Compensation in Lateral Bending of L-Shape Plate Considering Rollers Deflection

Jing Liu, Zhi-Jun Li, Lanyun Li, Xiao Li

DOI

2015

Deformation behavior analysis of S-shaped bellow in hydroforming

Lanyun Li, Yang Liu, Jing Liu, Xing Zhang, Xiao Li

2014

5.19 – Hot Shape Rolling

Lanyun Li, H. Yang, L. Guo

DOI

2013

Modeling and simulation of cold rolling process for double groove ball-section ring

Lanyun Li, Xiao Li, Jing Liu, Zhi-Zhu He

The International Journal of Advanced Manufacturing Technology

DOI

2012

3D-FE simulation of inhomogeneous stress and strain distributions in cold profiled ring rolling process under different hardening coefficients

Lanyun Li, Xiao Li, Zhi He

DOI

2011

Research on the effects of geometric parameters of ring blank on cold profiled ring rolling process

Lanyun Li, Xiao Li, Zhi He

DOI

2010

Research on the expanding deformation of ring radius in cold profiled ring rolling process

He Yang, Lanyun Li, Min Wang, Liang-Gang Guo

DOI

2010

Research on the influences of material properties and forming parameters in T-shaped closed cold ring rolling process

Lanyun Li, He Yang, Liang-Gang Guo, Zhi-Chao Sun

DOI

2008

A control method of guide rolls in 3D-FE simulation of ring rolling

Lanyun Li, He Yang, Liang-Gang Guo, Zhi-Chao Sun

DOI

2007

Research on interactive influences of parameters on T-shaped cold ring rolling by 3d-FE numerical simulation

Lanyun Li, He Yang, Liang-Gang Guo, Zhi-Chao Sun

DOI

2006

Determining and Optimizing of Guide Rolls Motion Track in Cold Ring Rolling Process

Zhi-Chao Sun, He Yang, Lanyun Li

DOI

精选作品

期刊论文

高温合金薄壁V型密封环滚压成形工艺研究

仪器化压痕拉伸性能测试技术发展现状与展望

钛合金在油气开采中的应用及研究现状

N、Nb合金化对309S奥氏体不锈钢腐蚀性能的影响

不同Cl-浓度下SRB对抗微生物腐蚀管材性能的影响

高熵合金吸波材料的研究进展

塑性成形工艺及模具设计课程教学改革

Precise Lattice‐Strain Modulation of Hematite Enabled by Gradient Doping of Mn for Enhanced Photoelectrocatalytic Oxidative C─C Bond Scission

Interfacial high-valence Ni(IV)-enabled C-H activation for photoelectrochemical C-C bond cleavage of lignin to exclusively produce aromatic carboxylic acids

Biomass valorization via electrocatalytic carbon–carbon bond cleavage

结构尺寸对316L矩形波纹管液压胀形的影响

OBE视域下“工程材料及成形技术”教改实践研究

基于Python和Abaqus的波纹管力学性能分析软件开发

考虑成形与循环滞后的波纹管疲劳寿命研究

Ti-3Ta-xNb合金在沸腾硝酸中的电化学腐蚀研究

Non-quantum nanostructures-enabled hot carriers generation for enhancive photoelectrocatalytic oxidation of bio-alcohol in water coupled with hydrogen evolution

高温合金矩形波纹管液压胀形变形特征

矩形金属波纹管机械胀形工艺仿真分析

多层高温合金波纹管液压胀形波高精确控制

不同热煨工艺对X80级弯管焊接粗晶区组织和性能的影响

双金属复合管液压胀形工艺参数的优化设计

板厚对T2紫铜板U形弯曲回弹的影响

析出相对铝基牺牲阳极组织及电化学性能的影响

Geometric imperfections of large diameter and thick-walled pipe fabricated by push bending with induction heating

Numerical investigation of the effect of material properties on forming metal bellows

J55 LC套管断裂失效原因分析

Deformation behaviors of four-layered U-shaped metallic bellows in hydroforming

内部控制与企业社会责任履行——基于代理成本的中介效应检验

基于雨课堂的《材料成型原理》课程教学改革研究与实践

材料成型卓越人才自主探究性培养模式研究与实践

初始间隙对双金属复合管液压成形的影响研究

厚壁热煨弯管局部感应加热推弯成形技术研究现状

大口径厚壁弯管的局部感应加热推弯成形的有限元建模研究

“Size effect” related hydroforming characteristics of thin-walled 316-L bellow considering pressure change

工艺参数对双层304不锈钢波纹管液压胀形回弹的影响

层数对不锈钢波纹管液压胀形影响研究

工艺参数对双层304不锈钢波纹管液压胀形的影响

Springback behaviors of bi-layered non-homogeneous bellows in hydroforming

金属塑性成形有限元数值模拟

A quantitative planning method of variable feed rates for cold profiled ring rolling process

Effects of roll sizes on uniformity of strain and variation of configuration in cold-closed T-shaped rolling process of HE30 aluminum alloy ring

Anisotropic and asymmetrical yielding and its distorted evolution: Modeling and applications

Multi–response optimisation design of parameters for cold ring rolling process using fuzzy–grey method

Springback Analysis of Thin-Walled Stainless Steel Bellow in Hydroforming

Radius Compensation in Lateral Bending of L-Shape Plate Considering Rollers Deflection

Deformation behavior analysis of S-shaped bellow in hydroforming

5.19 – Hot Shape Rolling

Modeling and simulation of cold rolling process for double groove ball-section ring

3D-FE simulation of inhomogeneous stress and strain distributions in cold profiled ring rolling process under different hardening coefficients

Research on the effects of geometric parameters of ring blank on cold profiled ring rolling process

Research on the expanding deformation of ring radius in cold profiled ring rolling process

Research on the influences of material properties and forming parameters in T-shaped closed cold ring rolling process

A control method of guide rolls in 3D-FE simulation of ring rolling

Research on interactive influences of parameters on T-shaped cold ring rolling by 3d-FE numerical simulation

Determining and Optimizing of Guide Rolls Motion Track in Cold Ring Rolling Process

会议论文

矩形波纹管整体成形仿真分析

单层316L不锈钢波纹管液压胀形工艺参数的优化

多层U形不锈钢波纹管液压胀形仿真分析