殷晓康

2026

深水钻井气侵监测用超声多普勒换能器设计

《传感技术学报》

2026

深水钻井气侵实时监测与预警实验系统设计

《实验技术与管理》

2026

A modular underwater wireless power transfer system based on multi-node resonant circuit for multiple AUVs

Ocean Engineering

DOI

2026

Full-matrix microscopic ultrasound for 3D reconstruction of leakage microholes in thin-walled stainless steel

Mechanical systems and signal processing

DOI

2026

Quantitative identification method of gas kick in deep-water drilling

The Physics of Fluids

DOI

2026

Coplanar capacitive sensing technique for defect detection on nylon liners of composite pipes: array design and applicability

Nondestructive Testing and Evaluation

DOI

2026

A Physics-Informed Neural Network-Based Camera Calibration Method

IEEE Transactions on Instrumentation and Measurement

DOI

2026

Efficient fictitious eigenfrequency issue-free full-wave simulation of 3D ultrasonic NDE using CFIE-based Nyström method accelerated by kernel independent algorithm.

Ultrasonics

DOI

2026

Efficient FEBI-based kernel-independent and truncation algorithm for predicting signals of 3D ECNDT with fast frequency sweeps in B-scan

Nondestructive Testing and Evaluation

DOI

2026

Wireless Passive EMAT for Thickness Measurement Using P–P–P Compensation Topology

IEEE Transactions on Instrumentation and Measurement

DOI

2026

Estimated-PSF-Based Regularization Method for Spreading-Effect Suppression Toward Accurate Defect Sizing in Coplanar Capacitive Sensing

NDT & E International

DOI

2026

Parameter design method for magneto-optical imaging detection system driven by an end-to-end magneto-optical dual-field coupling model

NDT & E International

DOI

2026

Orthogonal Amplitude and Phase Regulated Excitation Alternating Current Field Monitoring Method for Quantitative Crack Orientation Evaluation

IEEE transactions on industrial electronics (1982. Print)

DOI

2026

Research on Gas Kick Identification and Quantification Algorithm in Deep-water Drilling Based on Multiscale Fuzzy Diversity Entropy

Chemical engineering research & design

DOI

2026

Sensitivity characteristics of single-coil dual-mode sensors for multi-type defects detection in hybrid structures

Nondestructive Testing and Evaluation

DOI

2026

Physics-Informed Neural Network for Real-Time Imaging and Evaluation of Defect Based on High-Definition ACFM Probe

IEEE Transactions on Instrumentation and Measurement

DOI

2026

Magnetic resistance perturbation testing for high-sensitivity detection of subsurface and surface cracks in carbon steel

NDT & E International

DOI

2026

Efficient Improved SSA for 3D Geometric Information Recovery of Surface Defect in Eddy Current NDT

Journal of nondestructive evaluation

DOI

2026

A novel flexible magnetically coupled resonance alternating current field monitoring sensor array for crack monitoring

Nondestructive Testing and Evaluation

DOI

2026

uppressing Spreading in CCS Data of Complex-Shaped Defects via Estimated-PSF Regularized Deconvolution

e-Journal of Nondestructive Testing

DOI

2026

Design of Corrosion Protection Monitoring System for FPSO Risers Support Structure

Springer Proceedings in Materials

DOI

2025

水浸超声显微成像教学实验平台设计与开发

《实验室研究与探索》

2025

“四维联动、三元共育”模式下机械工程研究生拔尖创新人才培养探索与实践——以中国石油大学（华东）机械工程学科为例

《高教学刊》

DOI

2025

深水钻井水下早期溢流监测超声波监测传感器布设方案

《中国海洋平台》

2025

基于无线无源电容传感的蜂窝夹层结构渗水检测技术研究

《传感技术学报》

2025

A Single Excitation Source Multistage Wireless Power Transfer System for Enabling Flexible Joint Rotation of ROV Manipulator

International journal of circuit theory and applications

DOI

2025

A visualization method for cross-scale online monitoring of grinding state based on data-mechanism hybrid-driven digital twin system

Mechanical systems and signal processing

DOI

2025

A Floquet-PML framework for modelling circumferential guided waves in tubular open waveguides

Nondestructive Testing and Evaluation

DOI

2025

Edge-Intelligent Unmanned Aerial Vehicle Oil Tank Inspection Method Based on GWO-PSO Scheduling

IEEE International Conference on High Performance Computing and Communications

DOI

2025

A Novel Shear Horizontal Guided Wave EMAT With Periodic Solenoid Coils and a Single Magnet

IEEE Sensors Journal

DOI

2025

Efficient 3D Eddy Current NDE Model Based on Finite Element Boundary Integral Method

Journal of nondestructive evaluation

DOI

2025

Excitation of single mode shear horizontal (0,1) guided wave in a narrow plate waveguide using d24 piezoelectric wafers.

Ultrasonics

DOI

2025

Recent development of alternating current field measurement technology for defects detection: A review

NDT & E International

DOI

2025

Mitigating spreading effects in coplanar capacitive sensing via regularized image deconvolution using an estimated PSF

Measurement

DOI

2025

An intelligent 3-D reconstruction method for arbitrarily oriented subsurface cracks based on the multi-frequency RACFM technique

Nondestructive Testing and Evaluation

DOI

2025

Physically constrained two-stage residual network for defect sizing using capacitive imaging technique

Mechanical systems and signal processing

DOI

2025

High Precision Defect Sizing Method for Capacitive Imaging Based on Physics- Informed Neural Network

IEEE Transactions on Industrial Informatics

DOI

2025

Dual-Frequency Electromagnetic Sensor for Nondestructive Evaluation of “Insulator-Conductor” Hybrid Structures

IEEE transactions on industrial electronics (1982. Print)

DOI

2025

Face-Shear Single-Mode Guided Wave for Prediction of Double-Ended Fatigue Crack Propagation Using Particle Filter Method

IEEE Transactions on Instrumentation and Measurement

DOI

2025

Real-time detection of defects in WAAM specimen under poor surface quality using ACFM technology

Nondestructive Testing and Evaluation

DOI

2025

Universal current field bidirectional curl-gradient method for imaging detection of defects using alternating current field measurement technique

Measurement

DOI

2025

A 1D-AE-PINN Crack Quantification Network Inspired by a Novel Physical Feature of ACFM

IEEE Transactions on Industrial Informatics

DOI

2025

Measurement sensitivity distribution analysis of continuous wave ultrasonic Doppler transducers based on reciprocity theorem

Nondestructive Testing and Evaluation

DOI

2025

Gas kick monitoring in deep-water drilling risers based on ultrasonic Doppler spectroscopy

Ocean Engineering

DOI

2025

Resin Curing Monitoring Method for Steel Epoxy Sleeves using Circumferential SH Guided Waves

NDT & E International

DOI

2025

Spreading and Shrinking Effects of Coplanar Capacitive Sensors for Surface Defects

Journal of Nondestructive Evaluation

DOI

2024

工程领域裂纹检测实验方法的进展

《实验技术与管理》

2024

基于共面电容测量的PE材料老化程度测量方法研究

《传感技术学报》

2024

基于周向SH导波的钢制环氧套筒胶结缺陷检测方法研究

《仪器仪表学报》

DOI

2024

基于多项式混沌展开法的涡流无损检测高效元模型辅助探测概率的分析

《无损检测》

2024

A Discrimination Method of Three Types of Defects in Insulated Cladding Components Based on the Lift-off Effect of Capacitive Imaging (CI) Technology

Sensors and Actuators A: Physical

DOI

2024

A full-morphology measurement method and system for tubing internal thread based on rotating-mirrored structured light vision

Measurement

DOI

2024

Uniform Alternating Current Field Monitoring Sensor Array for Imaging and Quantitation of Cracks in Aluminum Alloy Structures

IEEE Sensors Journal

DOI

2024

3D visual reconstruction of corrosion in underwater structure using alternating current field measurement technique

Ocean Engineering

DOI

2024

LF RFID Capacitive Sensors for Curing Monitoring of Glass Fiber Reinforced Polymers

IEEE Sensors Journal

DOI

2024

Bicharacteristic Probability of Detection of Crack under Multi-factor Influences using alternating current field measurement technique

NDT & E International

DOI

2024

A Flexible Alternating Current Field Measurement Magnetic Sensor Array for In Situ Inspection of Cracks in Underwater Structure

IEEE Transactions on Instrumentation and Measurement

DOI

2024

Recent Development of Alternating Current Field Measurement Combine with New Technology

DOI

2024

Comparative Analysis of Baseline Sensitivity Metrics in Coplanar Capacitive Sensors for Non-Destructive Evaluation

2024 6th International Conference on Frontier Technologies of Information and Computer (ICFTIC)

DOI

2024

Defect Identification method for Capacitive-Inductive Dual-Mode Sensors with Lift-Off Interference

NDT & E International

DOI

2024

Double modes of torsional guided waves for locating and quantifying cracks in riser using electromagnetic acoustic transducer

Ocean Engineering

DOI

2024

Excitation characteristics of circumferential SH guided waves in steel pipes generated by EMATs with few-cycle PPM.

Ultrasonics

DOI

2024

Preface for special issue “non-destructive testing and structural health monitoring for smart cities”

Nondestructive Testing and Evaluation

DOI

2024

A novel transition frequency for identification and evaluation of subsurface cracks based on alternating current field measurement technique

Measurement

DOI

2024

Crack identification and quantification methods under the condition of lift-off effect using alternating current field measurement technique

Mechanical systems and signal processing

DOI

2024

Feasibility Study on the Use of the Coplanar Capacitive Sensing Technique for Underwater Non-Destructive Evaluation

Journal of Nondestructive Evaluation

DOI

2023

套管中环向传播的准SH波的衰减特征

《地球物理学报》

2023

切换式涡流-电容双模式无损检测系统研发

《无损检测》

2023

A Novel Dual-Mode Sensor for the Detection of Interface Flaw in “Insulator-Conductor” Composite Structures

IEEE Sensors Journal

DOI

2023

Design of Dual-Frequency Alternating Current Field Measurement Instrument Based on FPGA

2023 IEEE 11th International Conference on Information, Communication and Networks (ICICN)

DOI

2023

An End-to-End Physics-Informed Neural Network for Defect Identification and 3-D Reconstruction Using Rotating Alternating Current Field Measurement

IEEE Transactions on Industrial Informatics

DOI

2023

A Dual Mode Nondestructive Evaluation Sensor With Simultaneous Inductive and Capacitive Outputs

IEEE Sensors Journal

DOI

2023

Novel Semi-ring Type Alternating Current Field Measurement Probe for Inspection of Coiled Tubing

Measurement

DOI

2023

Novel phase reversal feature for inspection of cracks using multi-frequency alternating current field measurement technique

Mechanical systems and signal processing

DOI

2023

Robot and ACFM Collaborative Detection System Based on Space-time Synchronization

2023 IEEE 11th International Conference on Information, Communication and Networks (ICICN)

DOI

2023

Lift-Off Point of Intersection for Eliminating Lift-Off Noise in Alternating Current Field Measurement

IEEE Transactions on Instrumentation and Measurement

DOI

2023

High-accuracy calibration method for an underwater one-mirror galvanometric laser scanner.

Optics Express

DOI

2023

Differential Electromagnetic Acoustic Probes for Quantitative Detection of Pipeline Cracks

IEEE Sensors Journal

DOI

2023

Investigations into the negative sensitivity phenomenon in the detection of hidden defects using coplanar capacitive sensors

NDT & E International

DOI

2023

Coplanar capacitive sensors and their applications in non-destructive evaluation: a review

Nondestructive Testing And Evaluation

DOI

2022

在套管中激发环向传播的准SH波的有限元模拟及实验研究

《地球物理学报》

2022

CH32V103微控制器的便携式橡胶老化检测系统

《集成电路与嵌入式系统》

2022

全面开展本科生在线教学引发的几点思考——源于疫情防控期间的角色转变

《大学教育》

2022

Detection of Outer Wall Defects on Steel Pipe Using an Encircling Rotating Electromagnetic Field Eddy Current (RoFEC) Technique

Strojniški vestnik - Journal of Mechanical Engineering

DOI

2022

Visual Inspection of Irregular Cracks in Steel Structure by Double Gradient Fusion Algorithm Using Alternating Current Field Measurement Technique

IEEE Sensors Journal

DOI

2022

Visual and Intelligent Identification Methods for Defects in Underwater Structure Using Alternating Current Field Measurement Technique

IEEE Transactions on Industrial Informatics

DOI

2022

Rotating alternating current field measurement testing system with TMR arrays for arbitrary-angle crack on nonferromagnetic pipes

Measurement science and technology

DOI

2022

A Surface Crack Assessment Method Unaffected by Lift-Off Based on ACFM

IEEE Sensors Journal

DOI

2022

Vision measurement system for geometric parameters of tubing internal thread based on double-mirrored structured light.

Optics Express

DOI

2022

A novel fatigue crack angle quantitative monitoring method based on rotating alternating current field measurement

Measurement

DOI

2022

Single-lens multi-mirror laser stereo vision-based system for measuring internal thread geometrical parameters.

Optics Express

DOI

2021

外穿式集中绕组激励旋转电磁场涡流无损检测系统

《仪器仪表学报》

DOI

2021

阵列探头电容成像玻璃钢无损检测系统

《电子测量技术》

DOI

2021

基于Web远端控制的无线式电容无损检测系统

《实验室研究与探索》

DOI

2021

Combined Inductive and Capacitive NDE Technique for Insulator-Conductor Hybrid Structures

2021 48th Annual Review of Progress in Quantitative Nondestructive Evaluation

DOI

2021

Camera-Mirror Binocular Vision-Based Method for Evaluating the Performance of Industrial Robots

IEEE Transactions on Instrumentation and Measurement

DOI

2021

Monocular stereo vision based method for validating path accuracy of industrial robots

International Instrumentation and Measurement Technology Conference

DOI

2021

Spatial light path analysis and calibration of four-mirror-based monocular stereo vision.

Optics Express

DOI

2021

Detection System Development of Drill Pipe Thread Based on ACFM Technique

IEEE Sensors Journal

DOI

2021

Capacitive imaging using fused amplitude and phase information for improved defect detection

NDT & E international

DOI

2021

A Combined Inductive and Capacitive Non-Destructive Evaluation Technique Using a Single Spiral Coil Sensor

IEEE Sensors Journal

DOI

2021

Retrieving dimensions of surface features on conductors covered by insulation using the maximum Variation Ratio (MVR) in capacitive imaging

DOI

2021

Dual-mode Non-Destructive Evaluation Technique Using a Single Spiral Coil

2021 International Applied Computational Electromagnetics Society Symposium (ACES)

DOI

2020

电容-涡流双模式一体化探头检测性能影响因素研究

《仪器仪表学报》

DOI

2020

新形势下高校师德师风建设要从自律开始

《教育教学论坛》

2020

基于交流电磁场的水下结构物裂纹尺寸及剖面高精度评估方法

《中国石油大学学报(自然科学版)》

2020

基于微控制器的便携式共面电容无损检测系统

《实验技术与管理》

DOI

2020

空气耦合超声检测系统开发与测试

《电子测量技术》

DOI

2020

Identification of Tiny Surface Cracks in a Rugged Weld by Signal Gradient Algorithm Using the ACFM Technique

Italian National Conference on Sensors

DOI

2020

Visual Reconstruction of Irregular Crack in Austenitic Stainless Steel Based on ACFM Technique

Journal of Mechanical Engineering

DOI

2020

Coiled Tubing Wall Thickness Evaluation System Using Pulsed Alternating Current Field Measurement Technique

IEEE Sensors Journal

DOI

2020

Corrosion Depth Inversion Method Based on the Lift-Off Effect of the Capacitive Imaging (CI) Technique

IEEE Access

DOI

2020

A capacitive-inductive dual modality imaging system for non-destructive evaluation applications

Mechanical systems and signal processing

DOI

2020

DoF-Dependent and Equal-Partition Based Lens Distortion Modeling and Calibration Method for Close-Range Photogrammetry

Italian National Conference on Sensors

DOI

2020

An improved method of eddy current pulsed thermography to detect subsurface defects in glass fiber reinforced polymer composites

Composite structures

DOI

2019

不锈钢管道均匀电磁场内检测探头设计和试验研究

《中国石油大学学报(自然科学版)》

2019

基于SPOC模式的《机电信息检测与处理技术》教学改革研究

《教育教学论坛》

2019

绝缘及带绝缘包覆油气管道电容成像检测技术

《中国海上油气》

2019

交流电磁场裂纹实时判定与评估方法

《无损检测》

2019

Capacitive Imaging Technique for the Inspection of Composite Sucker Rod

DOI

2019

Visual and intelligent recognition of defects in underwater structures using ACFM technique

Review of Progress in Quantitative Nondestructive Evaluation

2019

A dual modality coplanar electromagnetic sensor for non-destructive evaluation application

Review of Progress in Quantitative Nondestructive Evaluation

2019

Inspection of both inner and outer cracks in aluminum tubes using double frequency circumferential current field testing method

Mechanical systems and signal processing

DOI

2019

Design and experimental study of aluminum alloy pipe detection probe based on ACFM

Review of Progress in Quantitative Nondestructive Evaluation

2019

Capacitive imaging technique for challenging NDE problems in oil and gas industry

Review of Progress in Quantitative Nondestructive Evaluation

2018

基于电容成像检测技术的带防腐层金属结构缺陷检测

《装备环境工程》

2018

Detection and evaluation of weld defects in stainless steel using alternating current field measurement

DOI

2018

Magnetic compression effect for the enhancement of crack response signals in non-ferromagnetic conductive tubes

Insight - Non-Destructive Testing and Condition Monitoring

DOI

2018

Bobbin Coil Probe With Sensor Arrays for Imaging and Evaluation of Longitudinal Cracks Inside Aluminum Tubes

IEEE Sensors Journal

DOI

2018

Two-Step Interpolation Algorithm for Measurement of Longitudinal Cracks on Pipe Strings Using Circumferential Current Field Testing System

IEEE Transactions on Industrial Informatics

DOI

2018

Performance evaluation of capacitive imaging sensors with different geometries

Insight - Non-Destructive Testing and Condition Monitoring

DOI

2018

Positive and negative variations in capacitive images for given defects under varying experimental conditions

DOI

2018

Further Investigations into the Capacitive Imaging Technique Using a Multi-Electrode Sensor

Applied Sciences

DOI

2018

Inner circumferential current field testing system with TMR sensor arrays for inner-wall cracks inspection in aluminum tubes

Measurement

DOI

2018

Lift-off Effect for Capacitive Imaging Sensors

Italian National Conference on Sensors

DOI

2017

“梁的应力应变测试”实验教学方案设计

《教育现代化》

2017

电容成像无损检测实验平台的开发

《实验技术与管理》

2017

基于COMSOL的电容成像传感器仿真研究

《电子测量技术》

2017

深水钻井补偿绞车的节能机理及解耦控制方案研究

《中国石油大学学报(自然科学版)》

2017

Investigation of optimal time-domain feature for non-surface defect detection through a pulsed alternating current field measurement technique

DOI

2017

Frequency optimisation of circumferential current field testing system for highly-sensitive detection of longitudinal cracks on a pipe string

DOI

2017

Multiple type defect detection in pipe by Helmholtz electromagnetic array probe

DOI

2017

Analysis of signals for inclined crack detection through alternating current field measurement with a U-shaped probe

DOI

2017

An Electromagnetic Helmholtz-Coil Probe for Arbitrary Orientation Crack Detection on the Surface of Pipeline

DOI

2017

Circumferential current field testing system with TMR sensor array for non-contact detection and estimation of cracks on power plant piping

DOI

2017

Circumferential Current Field Testing Method for Innerwall Cracks Detection in Aluminum Tube

2017 Far East NDT New Technology & Application Forum (FENDT)

DOI

2016

基于微信公众平台的自组织式课内实验安全教育教学手段研究

《高等理科教育》

2016

Further capacitive imaging experiments using modified probes

DOI

2016

Application of metal magnetic memory technology on defects detection of jack-up platform

DOI

2016

New parameters for the ACFM inspection of different materials

DOI

2016

Detection of Cracks in Metallic Objects by Arbitrary Scanning Direction Using a Double U-Shaped Orthogonal ACFM Probe

DOI

2016

High sensitivity rotating alternating current field measurement for arbitrary-angle underwater cracks

DOI

2016

In-service detection of longitudinal cracks on drill pipes using induced circumferential current

DOI

2016

Application of induced circumferential current for cracks inspection on pipe string

DOI

2016

Characterizing surface features on conducting specimens through an insulation layer using the capacitive imaging technique

AIP conference proceedings

DOI

2015

基于分形理论和随机抽样的机加工表面粗糙度轮廓曲线几何形貌共性表征

《应用基础与工程科学学报》

2015

粗糙表面几何形貌特征的分形参数描述

《润滑与密封》

2014

微观泄漏机理在非API套管接头密封性能评估中的应用

《石油学报》

2014

非API套管接头主密封结构气密性能试验分析

《压力容器》

2014

A Novel Non-Destructive Evaluation (NDE) Technique Using Coplanar Capacitive Imaging Probes

DOI

2014

Negative measurement sensitivity values of planar capacitive imaging probes

DOI

2014

Developing and testing of a novel portable ACFM intelligent instrument

DOI

2014

A feed-through ACFM probe with sensor array for pipe string cracks inspection

DOI

2014

The detection of axial cracks in pipe string using a feed-through ACFM probe

2014 IEEE Far East Forum on Nondestructive Evaluation/Testing

DOI

2013

英国RCNDE模式对我国无损检测研究及人才培养的启发

《教育教学论坛》

2013

Investigations into the measurement sensitivity distribution of coplanar capacitive imaging probes

DOI

2013

Analysis of the lift-off effect of a U-shaped ACFM system

DOI

2013

Studies of the factors influencing the imaging performance of the capacitive imaging technique

DOI

2013

Design and characterization of planar capacitive imaging probe based on the measurement sensitivity distribution

DOI

2013

Modeling and simulation of crack detection for underwater structures using an ACFM method

DOI

2012

Non-destructive evaluation of composite materials using a capacitive imaging technique

DOI

2012

Detecting surface features on conducting specimens through an insulation layer using a capacitive imaging technique

DOI

2011

Preliminary studies on the design principles of capacitive imaging probes for non-destructive evaluation

DOI

2011

CAPACITIVE IMAGING TECHNIQUE FOR NDE

DOI

2010

Non-destructive evaluation of concrete using a capacitive imaging technique : preliminary modelling and experiments

DOI

2009

Air-coupled ultrasonic spectroscopy of highly damping materials using pulse compression

IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control

DOI

2009

Further investigations into capacitive imaging for NDE

DOI

Alternating Current Field Measurement Technique for Detection and Measurement of Cracks in Structures

DOI

2025

基于SARIMA-LSTM组合模型的FPSO立管支撑结构阴极保护电位预测研究

《第十三届全国腐蚀与防护大会》

2021

Multi-objective PI controller tuning using NSGA-Ⅱ with preferability

《第40届中国控制会议论文集（3）》

DOI

2024

Sample Volume Visualization Method for Continuous Wave Ultrasonic Doppler Transducers Based on Reciprocity Theorem

SSRN Electronic Journal

DOI

2024

Research on Real-time and High-Precision Cracks Inversion Algorithm for ACFM Based on GA-BP Neural Network

Springer eBooks

DOI

2024

Design and Testing of High-Resolution Probe Arrays Using Alternating Current Field Measurement Technique

Springer eBooks

DOI

2024

Circumferential Current Field Testing System with TMR Sensor Array for Non-contact Detection and Estimation of Cracks on Power Plant Piping

Springer eBooks

DOI

2024

Visual Evaluation of Irregular Cracks in Steel by Double Gradient Fusion Algorithm Using Composite ACFM-MFL Testing Method

Springer eBooks

DOI

2024

Design and Experiment Research of Oblique Crack Detection System for Rail Tread Based on ACFM Technique

Springer eBooks

DOI

2024

Research on the Detection of Surface Cracks on Drilling Riser Using the Chain Alternating Current Field Measurement Probe Array

Springer eBooks

DOI

2024

Identification of Tiny Surface Cracks in a Rugged Weld by Signal Gradient Algorithm Using the ACFM Technique

Springer eBooks

DOI

2024

Design and Experimental Study of Inner Uniform Electromagnetic Probe in Stainless Steel Pipe

Springer eBooks

DOI

2024

An Electromagnetic Helmholtz-Coil Probe for Arbitrary Orientation Crack Detection on the Surface of Pipeline

Springer eBooks

DOI

2024

Novel Phase Reversal Feature for Inspection of Cracks Using Multi-frequency Alternating Current Field Measurement Technique

Springer eBooks

DOI

2024

High Sensitivity Rotating Alternating Current Field Measurement for Arbitrary-Angle Underwater Cracks

Springer eBooks

DOI

2024

Detection of Cracks in Metallic Objects by Arbitrary Scanning Direction Using a Double U-Shaped Orthogonal ACFM Probe

Springer eBooks

DOI

2024

A Novel Fatigue Crack Angle Quantitative Monitoring Method Based on Rotating Alternating Current Field Measurement

Springer eBooks

DOI

2024

Visual Reconstruction of Irregular Crack in Austenitic Stainless Steel Based on ACFM Technique

Springer eBooks

DOI

2024

Research on High-Precision Evaluation of Crack Dimensions and Profiles Methods for Underwater Structure Based on ACFM Technique

Springer eBooks

DOI

2024

Visual ACFM System Modeling and Optimization for Accurate Measurement of Underwater Cracks

Springer eBooks

DOI

2024

Inspection of Both Inner and Outer Cracks in Aluminum Tubes Using Double Frequency Circumferential Current Field Testing Method

Springer eBooks

DOI