戴一帆

期刊论文

1. 王宇盛，戴一帆，杜春阳，彭小强，胡杰，柳萌（2026）. 双向异性离子束修形设计及其误差敏感性分析（特邀）. 《光学学报》.
2. 张熙奎，熊玉朋，陈驰昊，王瑜，黄铖，戴一帆（2026）. 斜轴单转子单晶硅快速抛光方法. 《陆军工程大学学报》.
3. 董非，彭小强，赖涛，关朝亮，胡皓，戴一帆（2026）. 超低温与高应变速率耦合条件下Al-Mg-Si合金的流变特性及变形机制（英文）. Transactions of Nonferrous Metals Society of China.
4. Guohui Li, Gangjie Luo, Jiafu Zhou, Yang ou, Cheng Huang, Chaoliang Guan, Yifan Dai, Xiaoqiang Peng, Yupeng Xiong (2026). Effect of laser power on subsurface damage in laser-assisted machining of monocrystalline silicon. Journal of Manufacturing Processes.DOI
5. Guohui Li, Gangjie Luo, Yang ou, Cheng Huang, Jiafu Zhou, Chaoliang Guan, Yifan Dai, Xiaoqiang Peng, Yupeng Xiong (2026). Study on the influence of temperature uniformity on subsurface damage in laser-assisted turning of monocrystalline silicon. Journal of Materials Research and Technology.DOI
6. Yi Wang, Yifan Dai, Xi Zhang, C. H. Chen, Hao Hu, Chaoliang Guan, Chunyang Du (2026). Large-scale atomic-level precision surface fabrication using sub-aperture shear thickening polishing via material removal regulation. Journal of Manufacturing Processes.DOI
7. Xin Fang, Dianlong Yu, Jihong Wen, Yifan Dai, Matthew R. Begley, Huajian Gao, Peter Gumbsch (2026). Author Correction: Large recoverable elastic energy in chiral metamaterials via twist buckling. Nature.DOI
8. Yu Wang, Yifan Dai, Shanyong Chen, Chunyang Du, Yupeng Xiong (2026). Global form-to-performance trimming of hemispherical resonators. International Journal of Mechanical Sciences.DOI
9. Xi Zhang, Yifan Dai, Liangyu Zheng, Chaoliang Guan, Xikun Long, Guiqing Li (2026). A long-stroke fast tool servo system equipped with floating stator and its application in ultra-precision machining. Mechanical Systems and Signal Processing.DOI
10. Zelong Li, Yifan Dai, Hanwei Xu, Wenhui Chen, Tao Lai (2026). Efficient Measurement of Free-form Surfaces Based on Surface Matching Accuracy. Journal of Physics Conference Series.DOI
11. GANYU CHEN, Yupeng Xiong, Cheng Huang, Yang ou, Jiafu Zhou, Yifan Dai (2026). A novel exploration of low damage elliptical ultrasonic vibration assisted cutting method for high-power fiber laser beam shapers. Precision Engineering.DOI
12. 熊玉朋，陈善勇，陈适宇，黄铖，周家福，李国辉，戴一帆，关朝亮，欧洋（2025）. 单晶硅离轴反射光学元件短流程超精密加工工艺(特邀). 《红外与激光工程》.
13. Guohui Li, Gangjie Luo, Jiafu Zhou, Yang ou, Cheng Huang, Chaoliang Guan, Yifan Dai, Xiaoqiang Peng, Yupeng Xiong (2025). Influence of workpiece surface shapes on single-point diamond turning of monocrystalline silicon: Mechanism analysis and optimization strategies. Materials Science and Engineering B.DOI
14. Hanwei Xu, Yifan Dai, Tao Lai, Xiaoqiang Peng, Hao Hu, Yupeng Xiong, Zizhou Sun, Chaoliang Guan (2025). Theory and method of time-controlled grinding for optical non-cylindrical mandrels based on variable curvature removal function. Journal of Manufacturing Processes.DOI
15. Jie Wu, Jiafu Zhou, Yupeng Xiong, Cheng Huang, Yang Ou, Ganyu Chen, Yifan Dai (2025). Enhanced single-crystal AlN global planarization process based on chemical mechanical polishing. Precision Engineering.DOI
16. Zelong Li, Yifan Dai, Chaoliang Guan, Tao Lai, Hao Hu, Zizhou Sun, J. W. Wang (2025). High-precision sensitivity error analysis and compensation method for on-machine measurements of large aperture optical surfaces. Measurement.DOI
17. Zelong Li, Yifan Dai, Tao Lai, Saichen Li, Yufang Zhou (2025). High Accuracy Compensation of Straightness Errors in Linear Guideways Under Controlled Thermal and Vibrational Loads. Applied Sciences.DOI
18. Guohui Li, Gangjie Luo, Jiafu Zhou, Yang Ou, Cheng Huang, Chaoliang Guan, Yifan Dai, Xiaoqiang Peng, Yupeng Xiong (2025). Coupling effects of laser assistance and tool rake angle on brittle-ductile transition in monocrystalline silicon. Journal of Materials Research and Technology.DOI
19. Zizhou Sun, Hao Hu, Chaoliang Guan, Chunyang Du, C. H. Chen, Yifan Dai (2025). The suppression of edge error in time-controlled grinding for optical components. Journal of Manufacturing Processes.DOI
20. Xin Fang, Dianlong Yu, Jihong Wen, Yifan Dai, Matthew R. Begley, Huajian Gao, Peter Gumbsch (2025). Large recoverable elastic energy in chiral metamaterials via twist buckling. Nature.DOI
21. 刘俊峰，王瑜，杜春阳，赵羽乾，戴一帆，赖涛（2024）. 半球谐振子超精密修调方法研究. 《精密成形工程》.
22. Zelong Li, Yifan Dai, Zizhou Sun, Chao Liang Guan, Tao Lai, Hanwei Xu, Xinyao Zhou (2024). A sub-micron precision machining and measurement method of long travel metal guideways. Journal of Manufacturing Processes.DOI
23. Hanwei Xu, Yifan Dai, Zizhou Sun, Chaoliang Guan, Hao Hu, Kaihua Liu (2024). Research on the integrated process method of in-situ measurement and machining for the mandrel of aerostatic spindle. The International Journal of Advanced Manufacturing Technology.DOI
24. Linfeng Wang, Zikang Xie, Yunfeng Mao, Junfeng Liu, Shuai Xue, Shanyong Chen, Yifan Dai, Yong Liu (2024). Adaptive wavefront interferometry for large surface figure error utilizing convolutional neural networks. Global Intelligent Industry Conference (GIIC).DOI
25. C. Chen, Chaoliang Guan, Meng Liu, Yifan Dai, Hao Hu (2024). Research on the Magnetorheological Finishing Technology of a High-Steepness Optical Element Based on the Virtual-Axis and Spiral Scanning Path. Micromachines.DOI
26. Tao Lai, Junfeng Liu, Fulei Chen, Zelong Li, Chaoliang Guan, Huang Li, Chao Xu, Hao Hu, Yifan Dai, Shanyong Chen, Zhongxiang Dai (2024). Allocation of geometrical errors for developing precision measurement machine. Journal of Intelligent Manufacturing.DOI
27. Zizhou Sun, Chaoliang Guan, Hanwei Xu, Hao Hu, Yifan Dai (2024). Corrigendum to “The influence of journal's roundness on rotating accuracy of aerostatic spindle and precision improvement by time-controlled grinding” [Tribol Int 197 (2024) 109805]. Tribology International.DOI
28. Zizhou Sun, Chaoliang Guan, Hanwei Xu, Hao Hu, Yifan Dai (2024). The influence of journal's roundness on rotating accuracy of aerostatic spindle and precision improvement by time-controlled grinding. Tribology International.DOI
29. Fei Dong, Xiaoqiang Peng, Tao Lai, Chaoliang Guan, Guohui Li, Junfeng Liu, Yifan Dai (2024). Improving the surface quality and its mechanism in ultraprecision machining of Al–Mg–Si alloy by multiple high energy shot peening pretreatment. Journal of Materials Research and Technology.DOI
30. C. Chen, Yifan Dai, Hao Hu, Chaoliang Guan (2024). Study on the influence of a magnetorheological finishing path on the mid-frequency errors of optical element surfaces. Optics Express.DOI
31. Zizhou Sun, Yifan Dai, Hao Hu, Chaoliang Guan, Tao Lai, Zelong Li, Fulei Chen (2024). Optimization of dynamic characteristics for Time-Controlled Grinding using time-varying removal function. Journal of Manufacturing Processes.DOI
32. Zelong Li, Yifan Dai, Chaoliang Guan, Tao Lai, Zizhou Sun, Huang Li (2024). An on-machine measurement technique with sub-micron accuracy on a low-precision grinding machine tool. Journal of Manufacturing Processes.DOI
33. Chunyang Du, Yifan Dai, Hao Hu, Chaoliang Guan, Junfeng Liu, Tao Lai, Yuanyuan Tian (2024). Atomic-level insight into process and mechanism of ion beam machining on aluminum optical surface. Vacuum.DOI
34. 胡皓，陈学蕾，孙梓洲，戴一帆，关朝亮（2023）. 高精度轴类零件的砂带确定性修形方法. 《国防科技大学学报》.
35. 戴一帆，彭小强，薛帅，蒋庄德（2023）. 高性能光学制造. 《机械工程学报》.
36. 陈善勇，薛帅，熊玉朋，彭小强，戴一帆（2023）. 面向制造的光学面形超精密测量技术研究进展. 《激光与光电子学进展》.
37. 孙梓洲，陈付磊，胡皓，戴一帆，关朝亮，彭小强（2023）. 高精度光学元件控时磨削方法研究. 《中国科学:技术科学》.
38. Yupeng Xiong, Shiyu Chen, Yanxing Ma, Yang Ou, Wenwen Lu, Yifan Dai, Shanyong Chen, Cheng Huang (2023). Design and implementation of a dual aspheric integrated shaping element for a high-power fiber laser. Applied Optics.DOI
39. Shanyong Chen, Chaoliang Guan, Hao Hu, Shuai Xue, Yifan Dai (2023). Corrective machining of monolithic multiple freeform mirrors based on holographic null test. Optics and Lasers in Engineering.DOI
40. Fulei Chen, Xiaoqiang Peng, Zizhou Sun, Hao Hu, Yifan Dai, Tao Lai (2023). Modeling and Experimental Verification of Time-Controlled Grinding Removal Function for Optical Components. Micromachines.DOI
41. Hanwei Xu, Zizhou Sun, Yifan Dai, Chaoliang Guan, Hao Hu (2023). In Situ Measurement and Reconstruction Technology of Cylindrical Shape of High-Precision Mandrel. Micromachines.DOI
42. Zizhou Sun, Chaoliang Guan, Yifan Dai, Hao Hu, Tao Lai, Chunyang Du, Fulei Chen (2023). Ultra-precision time-controlled grinding for flat mechanical parts with weak stiffness. Journal of Manufacturing Processes.DOI
43. Hanwei Xu, Zizhou Sun, Yifan Dai, Chaoliang Guan, Hao Hu, Yu Wang (2023). In Situ Measurement of Spindle Radial Error for Ultra-Precision Machining Based on Three-Point Method. Micromachines.DOI
44. Zhifan Lin, Hao Hu, Yifan Dai, Yaoyu Zhong, Shuai Xue (2023). High-Efficiency Chemical-Mechanical Magnetorheological Finishing for Ultra-Smooth Single-Crystal Silicon. Nanomaterials.DOI
45. Zhifan Lin, Hao Hu, Yifan Dai, Yaoyu Zhong, Shuai Xue (2022). Prediction of surface roughness and the material removal rate in magnetorheological finishing. Optics Express.DOI
46. Yongbin Wang, Hao Hu, Yifan Dai, Zhifan Lin, Shuai Xue (2022). Process Optimization Based on Analysis of Dynamic and Static Performance Requirements of Ion Beam Figuring Machine Tools for Sub-Nanometer Figuring. Photonics.DOI
47. Yu Wang, Chaoliang Guan, Yifan Dai, Shuai Xue (2022). On-Machine Measurement of Profile and Concentricity for Ultra-Precision Grinding of Hemispherical Shells. Micromachines.DOI
48. Yu Wang, Chaoliang Guan, Yifan Dai, Shuai Xue (2022). Geometric Error Analysis and Compensation in Spherical Generating Grinding of Hemispherical Shell Resonators. Micromachines.DOI
49. Lianmin Yin, Zhifan Lin, Hao Hu, Yifan Dai (2022). Rapid polishing process for the x ray reflector. Applied Optics.DOI
50. Yu Wang, Chaoliang Guan, Yifan Dai, Yusheng Wang, Zelong Li, Hanwei Xu (2022). Study on the effect of HF acid etching on the quality factor and frequency split of fused silica hemispherical resonators.DOI
51. Lianmin Yin, Hao Hu, Chaoliang Guan, Shuai Xue, Yifan Dai (2022). Smooth polishing with non-linear compensation. Optik.DOI
52. Shanyong Chen, Yifan Dai, Dede Zhai, Yupeng Xiong (2022). Quasi-absolute interferometric testing of cylinders. Optics Letters.DOI
53. Chaoliang Guan, Chunyang Du, Yifan Dai, Hao Hu (2022). Ion beam figuring strategy for aluminum optics with minimal extra material removal. Applied Optics.DOI
54. Yongbin Wang, Yifan Dai, Hao Hu, Shuai Xue, Jiahui Bao (2022). The relationship between dynamic performance of ion beam figuring equipment and optical surface accuracy. Eighth Symposium on Novel Photoelectronic Detection Technology and Applications.DOI
55. Lianmin Yin, Yifan Dai, Hao Hu, Chaoliang Guan (2022). Elastic emission polishing based on shear thickening slurry. Seventh Asia Pacific Conference on Optics Manufacture (APCOM 2021).DOI
56. Shuai Xue, Yifan Dai, Lianmin Yin, Zhifan Lin (2022). Flexible phase control of spatial light modulators in interferometric surface figure tests. Seventh Asia Pacific Conference on Optics Manufacture (APCOM 2021).DOI
57. Yongbin Wang, Yifan Dai, Hao Hu, Zhe Zeng, Guangqi Zhou (2022). Study on the relationship between motion accuracy and optical surface accuracy of ion beam figuring equipment. Seventh Asia Pacific Conference on Optics Manufacture (APCOM 2021).DOI
58. Lianmin Yin, Yifan Dai, Hao Liang Hu, Shuai Xue, Chaoliang Guan (2022). Influence of Nozzle Distribution on Micro-jet. Smart innovation, systems and technologies.DOI
59. 熊玉朋，王建鹏，戴一帆，陈善勇，方剑委（2021）. 科教融合视角下的光学与长度计量课程建设研究. 《现代职业教育》.
60. 梁建成，戴一帆，关朝亮，杜春阳（2021）. 复杂曲面快轴伺服加工技术. 《机床与液压》.
61. Zelong Li, Chaoliang Guan, Yifan Dai, Jiahao Yong (2021). Optical surface error analysis and compensation technique based on Zernike polynomial coefficients.DOI
62. Lianmin Yin, Yifan Dai, Shuai Xue, Zhifan Lin, Bing Yang, Yongbin Wang (2021). The influence of pressure groove on micro jet machining.DOI
63. Yongbin Wang, Yifan Dai, Hao Hu, Chunyang Du, Jiahui Bao (2021). Study on rapid convergence strategy of nano-precision optical surface by ion beam figuring. Optics Communications.DOI
64. Zelong Li, Chaoliang Guan, Yifan Dai, Shuai Xue, Lianmin Yin (2021). Comprehensive Design Method of a High-Frequency-Response Fast Tool Servo System Based on a Full-Frequency Error Control Algorithm. Micromachines.DOI
65. Shuai Xue, Lingwei Kong, Yifan Dai, Shanyong Chen, Zhifan Lin (2021). Near-null interferometric test of aspheric cylinders utilizing a partial null lens. Measurement Science and Technology.DOI
66. Lianmin Yin, Hao Hu, Chaoliang Guan, Yifan Dai, Zelong Li (2021). Edge Control in the Computer-Controlled Optical Surface. Micromachines.DOI
67. Chunyang Du, Yifan Dai, Chaoliang Guan, Hao Hu (2021). High precision fabrication of aluminum optics by optimizing an Ar+ ion beam figuring strategy for polishing the contamination layer. Optics Express.DOI
68. Lianmin Yin, Yifan Dai, Hao Hu (2021). Nanoindentation Characterization of Single-Crystal Silicon with Oxide Film. Silicon.DOI
69. Chunyang Du, Yifan Dai, Chaoliang Guan, Hao Hu (2021). Molecular Dynamic Investigation of the Anisotropic Response of Aluminum Surface by Ions Beam Sputtering. Micromachines.DOI
70. Hanqiang Zhang, Yifan Dai, Tao Lai (2021). Highly Accurate Digital Processing of Large Stroke Guideway with an Optical Material-Corning Code 7972. Materials.DOI
71. Yaoyu Zhong, Yifan Dai, Hang Xiao, Feng Shi (2021). Experimental study on surface integrity and subsurface damage of fused silica in ultra-precision grinding. The International Journal of Advanced Manufacturing Technology.DOI
72. Yaoyu Zhong, Ci Song, Yifan Dai, Feng Shi, Xiaodong Zhang (2021). Experimental study on removal of antireflection sol-gel SiO2 coating of fused silica assisted by ion beam etching. International Symposium on High Power Laser Science and Engineering (HPLSE).DOI
73. Jiahao Yong, Junfeng Liu, Chaoliang Guan, Yifan Dai, Fei Li (2021). Fabrication and evaluation of complicated microstructures on cylindrical surface. Optik.DOI
74. Shuai Xue, Yifan Dai, Shengyue Zeng, Shanyong Chen, Ye Tian, Feng Shi (2021). Interferometric stitching method for testing cylindrical surfaces with large apertures. Optics Express.DOI
75. Zelong Li, Yifan Dai, Chaoliang Guan, Jiahao Yong, Zizhou Sun, Chunyang Du (2021). High-Precision Machining Method of Weak-Stiffness Mirror Based on Fast Tool Servo Error Compensation Strategy. Micromachines.DOI
76. Chunyang Du, Yifan Dai, Chaoliang Guan, Hao Hu (2021). Rapid fabrication technique for aluminum optics by inducing a MRF contamination layer modification with Ar+ ion beam sputtering. Optics Express.DOI
77. Yaoyu Zhong, Yifan Dai, Ye Tian, Feng Shi (2021). Effect on nanoscale damage precursors of fused silica with wet etching in KOH solutions. Optical Materials Express.DOI
78. Chunyang Du, Yifan Dai, Chaoliang Guan, Hao Hu (2021). High efficiency removal of single point diamond turning marks on aluminum surface by combination of ion beam sputtering and smoothing polishing. Optics Express.DOI
79. Hang Xiao, Yifan Dai, Ji’an Duan, Ye Tian, Jia Li (2021). Material removal and surface evolution of single crystal silicon during ion beam polishing. Applied Surface Science.DOI
80. 伍凡，戴一帆（2020）. 先进光学制造专题导读. 《光电工程》.
81. 徐超，彭小强，戴一帆（2020）. 复杂曲面铝反射镜超精密制造现状. 《光电工程》.
82. Jiahao Yong, Junfeng Liu, Chaoliang Guan, Yifan Dai, Fei Li, Zhanbin Fan (2020). Fabrication and evaluation of complicated microstructures on cylindrical surface. PLoS ONE.DOI
83. Yupeng Xiong, Tiancong Luo, Yifan Dai, Shanyong Chen, Guipeng Tie (2020). In situ measurement and error compensation of monolithic multisurface optics. Optics Communications.DOI
84. Yupeng Xiong, Tiancong Luo, Yifan Dai, Shanyong Chen, Xiaoqiang Peng (2020). Review on the technology development of optical imaging system based on monolithic multisurface optics. AOPC 2020: Optical Sensing and Imaging Technology.DOI
85. Chaoliang Guan, Jiahao Yong, Junfeng Liu, Yifan Dai, Zhanbin Fan, Fei Li (2020). Fabrication of optical microstructures on roller surface based on fast tool servo system. Micro & Nano Letters.DOI
86. Zizhou Sun, Hao Hu, Yifan Dai, Chaoliang Guan, Guipeng Tie, Yang Ou (2020). Frequency Domain Analysis and Precision Realization in Deterministic Figuring of Ultra-Precision Shaft Parts. Materials.DOI
87. Chunyang Du, Yifan Dai, Hao Hu, Chaoliang Guan (2020). Surface roughness evolution mechanism of the optical aluminum 6061 alloy during low energy Ar+ ion beam sputtering. Optics Express.DOI
88. Tao Zhao, Hao Hu, Xiaoqiang Peng, Chaoliang Guan, Yifan Dai, Jiahao Yong, Zihao Gan (2020). High-precision processing method for an aluminum mirror assisted with a femtosecond laser. Applied Optics.DOI
89. Jiahao Yong, Yifan Dai, Chaoliang Guan, Xiaoqiang Peng, Tiegui Peng, Junfeng Liu (2020). Design of High-Performance Fast Tool Servo System Based on Two-Way Piezoelectric Ceramics. Proceedings of 2020 the 7th International Conference on Automation and Logistics (ICAL 2020).DOI
90. Zizhou Sun, Yifan Dai, Hao Hu, Guipeng Tie, Chaoliang Guan, Xuelei Chen (2020). Research on Deterministic Figuring of Ultra-Precision Shaft Parts Based on Analysis and Control of Figuring Ability. Materials.DOI
91. Yaoyu Zhong, Yifan Dai, Feng Shi, Ci Song, Ye Tian, Zhifan Lin, Wanli Zhang, Yongxiang Shen (2020). Effects of Ion Beam Etching on the Nanoscale Damage Precursor Evolution of Fused Silica. Materials.DOI
92. Zizhou Sun, Yifan Dai, Hao Hu, Chaoliang Guan, Guipeng Tie, Xuelei Chen (2020). Design of Compound Machine Tool for Ultra-Precision Shaft Parts. MATEC Web of Conferences.DOI
93. Tao Zhao, Xiaoqiang Peng, Hao Hu, Chaoliang Guan, Yifan Dai (2019). Research on the key technology for processing efficiency improvement of aluminum alloy mirror chemical mechanical polishing.DOI
94. Xuelei Chen, Yifan Dai, Hao Hu, Guipeng Tie, Chaoliang Guan (2019). Influence of installation error on roundness error measurement. IOP Conference Series Materials Science and Engineering.DOI
95. Hanqiang Zhang, Yifan Dai, Ci Song, Guipeng Tie (2019). Research on high precision combined processing technology of meter-level optical glass guideway. Pacific Rim Laser Damage: Optical Materials for High-Power Lasers (PLD).DOI
96. Wanli Zhang, Feng Shi, Yifan Dai, Ci Song, Ye Tian, Yaoyu Zhong (2019). Single crystal silicon: surface evolution regularity of chemical etching and effect of nano jet polishing on damage precursor. Second Symposium on Novel Technology of X-Ray Imaging.DOI
97. Kun Zhang, Feng Shi, Lin Zhen Zhou, Wanli Zhang, Yifan Dai (2019). Influence mechanism of plasma cleaning and ion beam figuring on the intrinsic surface of fused silica. Second Symposium on Novel Technology of X-Ray Imaging.DOI
98. Xuelei Chen, Yifan Dai, Hao Hu, Guipeng Tie, Chaoliang Guan (2019). Research on High Precision and Deterministic Figuring for Shaft Parts Based on Abrasive Belt Polishing. Materials.DOI
99. Wanli Zhang, Feng Shi, Yifan Dai, Yaoyu Zhong, Ci Song, Ye Tian (2019). Research on the Surface Evolution of Single Crystal Silicon Mirror Contaminated by Metallic Elements during Elastic Jet Polishing Techniques. Materials.DOI
100. Aihua Chen, Yifan Dai, Guipeng Tie (2019). Wear rule of grinding wheel and its influence on surface form during grinding process of aspheric optical elements.DOI
101. Zhifan Lin, Yifan Dai, Xiaoqiang Peng, Hao Liang Hu, Ci Song, Feng Shi (2019). Combined technique of chemical mechanical polishing and acid etching for improving the laser-induced damage threshold of calcium fluoride.DOI
102. Wanli Zhang, Feng Shi, Ye F. Tian, Yifan Dai, Ci Song (2019). Research on combined surface modification of single crystal silicon cylindrical mirror.DOI
103. Zhanbin Fan, Yifan Dai, Lin Zhen Zhou, Chaoliang Guan, Guipeng Tie (2019). Thermal control for ion beam figuring of thin-layer unimorph deformable mirror. Optical Engineering.DOI
104. 范占斌，戴一帆，关朝亮，铁贵鹏，祁超（2018）. 集成应变反馈层的横向压电驱动变形镜面形预测及闭环控制. 《仪器仪表学报》.DOI
105. 范占斌，戴一帆，铁贵鹏，关朝亮，宁禹，刘俊峰（2018）. 横向压电驱动变形镜的迟滞特性及其闭环校正. 《红外与激光工程》.
106. 范占斌，戴一帆，宁禹，关朝亮，刘俊峰，付天洋（2018）. 低阶像差校正的压电驱动变形镜测试与仿真优化. 《国防科技大学学报》.
107. Zhanbin Fan, Yifan Dai, Chaoliang Guan, Guipeng Tie, Chao Qi, Yaoyu Zhong (2018). Unimorph deformable mirror with an integrated strain feedback layer. Applied Optics.DOI
108. Mingjin Xu, Yifan Dai, Lin Zhen Zhou, Xiaoqiang Peng, Shaoshan Chen, Wenlin Liao (2018). Evolution mechanism of surface roughness during ion beam sputtering of fused silica. Applied Optics.DOI
109. Zhanbin Fan, Yifan Dai, Chaoliang Guan, Guipeng Tie, Junfeng Liu (2018). Effect of the adhesive layer on the unimorph deformable mirror. Optik.DOI
110. Yuehong Yin, Yifan Zhang, Yifan Dai, Qi Xiao, Guipeng Tie (2018). Novel magneto-rheological finishing process of KDP crystal by controlling fluid-crystal temperature difference to restrain deliquescence. CIRP Annals.DOI
111. Wenlin Liao, Yifan Dai, Xutao Nie, Xuqing Nie, Mingjin Xu (2017). Nanostructure formation and regulation during low-energy ion beam sputtering of fused silica surfaces. Optical Engineering.DOI
112. Meng Guo, Yifan Dai, Xiaoqiang Peng, Guipeng Tie, Tao Lai (2017). Manufacture of ultra high precision aerostatic bearings based on glass guide.DOI
113. Yifan Dai, Quan Liao, Junfeng Liu (2017). Optimal design of high performance linear guideway based on orifice restriction.DOI
114. Yifan Dai, Hao Hu, Guipeng Tie, Shuai Chen (2017). Design and optimization of surface profilometer based on coplanar guide rail.DOI
115. Wen Wan, Feng Shi, Yifan Dai, Xiaoqiang Peng (2017). Characterization of laser damage performance of fused silica using photothermal absorption technique. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
116. 吴伟彬，戴一帆，关朝亮，范占斌，钟曜宇（2016）. 横向压电效应变形镜优化设计. 《红外与激光工程》.
117. 石峰，万稳，戴一帆，彭小强（2016）. 磁流变抛光对熔石英激光损伤特性的影响. 《光学精密工程》.
118. Shengyi Li, Yifan Dai (2016). Ion Beam Figuring Technology.DOI
119. Shengyi Li, Yifan Dai (2016). CCOS Technology Based on Small Polishing Pad.DOI
120. Shengyi Li, Yifan Dai (2016). Index.DOI
121. Shengyi Li, Yifan Dai (2016). Evaluation of Deterministic Optical Machining Errors.DOI
122. Shengyi Li, Yifan Dai (2016). Subsurface Damage of Optical Components in Manufacturing Processes.DOI
123. Shengyi Li, Yifan Dai (2016). The Basic Theory of Aspheric Optical Lapping and Polishing Technology.DOI
124. Shengyi Li, Yifan Dai (2016). Phase Retrieval In Situ Testing of Large‐Middle Optical Surfaces.DOI
125. Shengyi Li, Yifan Dai (2016). Magnetorheological Figuring.DOI
126. Shengyi Li, Yifan Dai (2016). Measurement Technology in Manufacturing of Large‐Middle Optical Surfaces.DOI
127. Shengyi Li, Yifan Dai (2016). Foundation of the Aspheric Optical Polishing Technology.DOI
128. Shengyi Li, Yifan Dai (2016). Coordinate Measuring Technology of Optical Aspheric Surface.DOI
129. Shengyi Li, Yifan Dai (2016). Subaperture Stitching Interferometry.DOI
130. Zhanbin Fan, Yifan Dai, Guipeng Tie, Chaoliang Guan (2016). Optimizing design method of static simulation for Unimorph DM. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
131. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Shengyi Li (2016). Computations involved in IBF process and introduction of the software IBFCAM. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
132. Weibin Wu, Yifan Dai, Lin Zhen Zhou, Mingjin Xu (2016). Research on material removal accuracy analysis and correction of removal function during ion beam figuring. Optical Engineering.DOI
133. Baolu Shi, Yifan Dai, Xuhui Xie, Shengyi Li, Lin Zhen Zhou (2016). An experimental study on arcing in arc-enhanced plasma machining technology for etching of silicon carbide ceramics. The International Journal of Advanced Manufacturing Technology.DOI
134. Yanglin Peng, Yifan Dai, Ci Song, Feng Shi (2016). Tool deflection model and profile error control in helix path contour grinding. International Journal of Machine Tools and Manufacture.DOI
135. Lin Zhen Zhou, Lei Huang, Nathalie Bouet, Konstantine Kaznatcheev, Matthew Vescovi, Yifan Dai, Shengyi Li, Mourad Idir (2016). New figuring model based on surface slope profile for grazing-incidence reflective optics. Journal of Synchrotron Radiation.DOI
136. Xiaoqiang Peng, Can Qun Yang, Hao Hu, Yifan Dai (2016). Measurement and algorithm for localization of aspheric lens in magnetorheological finishing. The International Journal of Advanced Manufacturing Technology.DOI
137. Mingjin Xu, Yifan Dai, Lin Zhen Zhou, Feng Shi, Wen Wan, Xuhui Xie, Tingting Sui (2016). Investigation of surface characteristics evolution and laser damage performance of fused silica during ion-beam sputtering. Optical Materials.DOI
138. Shanyong Chen, Yifan Dai, Xiaoqiang Peng, Shengyi Li (2016). Error analysis and surface reconstruction for swing arm profilometry. Measurement.DOI
139. Baolu Shi, Yifan Dai, Xuhui Xie, Shengyi Li, Lin Zhen Zhou (2016). Arc-Enhanced Plasma Machining Technology for High Efficiency Machining of Silicon Carbide. Plasma Chemistry and Plasma Processing.DOI
140. Lin Zhen Zhou, Mourad Idir, Nathalie Bouet, Konstantine Kaznatcheev, Lei Huang, Matthew Vescovi, Yifan Dai, Shengyi Li (2015). One-dimensional ion-beam figuring for grazing-incidence reflective optics. Journal of Synchrotron Radiation.DOI
141. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Shengyi Li (2015). Obliquely incident ion beam figuring. Optical Engineering.DOI
142. Yanglin Peng, Yifan Dai, Ci Song, Shanyong Chen (2015). Error analysis and compensation of line contact spherical grinding with cup-shaped wheel. The International Journal of Advanced Manufacturing Technology.DOI
143. Wenlin Liao, Yifan Dai, Xuqing Nie, Xuhui Xie, Ci Song (2015). Rapid fabrication technique for nanometer-precision aspherical surfaces. Applied Optics.DOI
144. Shanyong Chen, Yifan Dai, Xuqing Nie, Shengyi Li (2015). Parametric registration of cross test error maps for optical surfaces. Optics Communications.DOI
145. Wenlin Liao, Yifan Dai, Xuhui Xie (2014). Influence of material removal programming on ion beam figuring of high-precision optical surfaces. Optical Engineering.DOI
146. Baolu Shi, Xuhui Xie, Yifan Dai, Chunde Liao (2014). A high efficiency machining method of SiC: ion-enhanced atmospheric pressure plasma machining. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
147. Wenlin Liao, Yifan Dai, Xuhui Xie (2014). Nanopatterning of optical surfaces during low-energy ion beam sputtering. Optical Engineering.DOI
148. Wenlin Liao, Yifan Dai, Xuhui Xie, Lin Zhen Zhou (2014). Mathematical modeling and application of removal functions during deterministic ion beam figuring of optical surfaces Part 1: Mathematical modeling. Applied Optics.DOI
149. Wenlin Liao, Yifan Dai, Xuhui Xie, Lin Zhen Zhou (2014). Mathematical modeling and application of removal functions during deterministic ion beam figuring of optical surfaces Part 2: application. Applied Optics.DOI
150. Wenlin Liao, Yifan Dai, Xuhui Xie, Lin Zhen Zhou (2014). Influence of local densification on microscopic morphology evolution during ion-beam sputtering of fused-silica surfaces. Applied Optics.DOI
151. Wenlin Liao, Yifan Dai, Xuhui Xie, Lin Zhen Zhou (2014). Microscopic morphology evolution during ion beam smoothing of Zerodur^® surfaces. Optics Express.DOI
152. 戴一帆，彭小强（2013）. 光刻物镜光学零件制造关键技术概述. 《机械工程学报》.
153. 袁征，戴一帆，解旭辉，周林，彭文强（2013）. 氟化钙单晶超精密抛光技术. 《机械工程学报》.
154. Wenqiang Peng, Shengyi Li, Chaoliang Guan, Xinmin Shen, Yifan Dai, Zhuo Wang (2013). Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing. Optical Engineering.DOI
155. Guipeng Tie, Yifan Dai, Chaoliang Guan, Shaoshan Chen, Bing Song (2013). Research on subsurface defects of potassium dihydrogen phosphate crystals fabricated by single point diamond turning technique. Optical Engineering.DOI
156. Wenlin Liao, Yifan Dai, Xuhui Xie, Lin Zhen Zhou (2013). Combined figuring technology for high-precision optical surfaces using a deterministic ion beam material adding and removal method. Optical Engineering.DOI
157. Guipeng Tie, Yifan Dai, Chaoliang Guan, Ziqiang Yin (2013). Research on single-point diamond turning of optical cantilever parts. The International Journal of Advanced Manufacturing Technology.DOI
158. Feng Shi, Yong Shu, Yifan Dai, Xiaoqiang Peng, Shengyi Li (2013). Magnetorheological elastic super-smooth finishing for high-efficiency manufacturing of ultraviolet laser resistant optics. Optical Engineering.DOI
159. Xuqing Nie, Shengyi Li, Yifan Dai, Ci Song (2013). A new polishing process for large-aperture and high-precision aspheric surface. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
160. Xuhui Xie, Hao Yu, Lin Zhen Zhou, Yifan Dai, Shengyi Li (2012). High thermal expansion optical component machined by ion beam figuring. Optical Engineering.DOI
161. 廖文林，戴一帆，周林，王建敏，袁征，解旭辉（2011）. 离子束抛光加工矩形离轴非球面镜. 《国防科技大学学报》.
162. Yifan Dai, Hao Hu, Xiaoqiang Peng, Jianmin Wang, Feng Shi (2011). Research on error control and compensation in magnetorheological finishing. Applied Optics.DOI
163. Hao Hu, Yifan Dai, Xiaoqiang Peng, Jianmin Wang (2011). Research on reducing the edge effect in magnetorheological finishing. Applied Optics.DOI
164. Yifan Dai, Shanyong Chen, Shengyi Li, Hao Hu, Qi Zhang (2011). Stylus profilometry for steep aspheric surfaces with multisegment stitching. Optical Engineering.DOI
165. 石峰，戴一帆，彭小强，王卓（2010）. 磁流变抛光消除磨削亚表面损伤层新工艺. 《光学精密工程》.
166. 宋辞，戴一帆，彭小强，石峰（2010）. 光学镜面磁流变抛光的后置处理. 《光学精密工程》.
167. 关朝亮，王建敏，戴一帆，尹自强（2010）. 基于Zernike多项式拟合的自由曲面车削误差补偿技术. 《国防科技大学学报》.
168. Fan Yang, Yifan Dai (2010). Machining parameters selecting and optimization for fast tool servo considering the FTS dynamics. Advances in Optoelectronics and Micro/nano-optics.DOI
169. Yifan Dai, Wenlin Liao, Lin Zhen Zhou, Shanyong Chen, Xuhui Xie (2010). Ion beam figuring of high-slope surfaces based on figure error compensation algorithm. Applied Optics.DOI
170. Hao Hu, Yifan Dai, Xiaoqiang Peng (2010). Restraint of tool path ripple based on surface error distribution and process parameters in deterministic finishing. Optics Express.DOI
171. Zhaoze Li, Shengyi Li, Yifan Dai, Xiaoqiang Peng (2010). Optimization and application of influence function in abrasive jet polishing. Applied Optics.DOI
172. Yifan Dai, Chaoliang Guan, Ziqiang Yin, Guipeng Tie, Hao-feng Chen, Jianmin Wang (2010). Tool decentration effect in slow tool servo diamond turning off-axis conic aspheric surface. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
173. Yifan Dai, Wenlin Liao, Shanyong Chen, Lin Zhen Zhou, Xuhui Xie (2010). Theoretical analysis and experimental study of material removal characteristics in ion beam figuring process. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
174. Shengyi Li, Xuhui Xie, Yifan Dai (2010). Research on controllable compliant tools (CCT) theory and technology. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
175. Hao Hu, Yifan Dai, Chaoliang Guan, Ziqiang Yin, Zhaoze Li (2010). Deterministic manufacturing technologies for polycrystalline magnesium fluoride conformal domes. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
176. Fan Yang, Yifan Dai, Fei Wan, Guilin Wang (2010). A surface data generation method of optical micro-structure and analysis system for Fast Tool Servo fabricating. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
177. Haofeng Chen, Yifan Dai, Xiaoqiang Peng, Ziwen Zheng, Chaoliang Guan (2010). The mechanism for material removal in ductile mode cutting of CaF 2 brittle crystals. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
178. 宋辞，彭小强，戴一帆，石峰（2009）. 基于去除函数预测模型的磁流变抛光工艺优化研究. 《国防科技大学学报》.
179. 胡皓，彭小强，戴一帆，石峰（2009）. 磁流变抛光螺旋扫描方式的算法与实现. 《国防科技大学学报》.
180. 周林，戴一帆，解旭辉，李圣怡（2009）. 计算机控制抛光中基于等面积增长螺旋线的加工路径. 《国防科技大学学报》.
181. 吴冬良，戴一帆，王贵林，周林，焦长君（2009）. 离子束加工误差对散射损失的影响研究. 《国防科技大学学报》.
182. 戴一帆，曾生跃，陈善勇（2009）. 环形子孔径测试的迭代拼接算法及其实验验证. 《光学精密工程》.
183. 吴冬良，戴一帆，王贵林（2009）. 光学加工中高频误差对环围能量比的影响. 《光学精密工程》.
184. 王卓，吴宇列，戴一帆，李圣怡，鲁德凤，徐惠赟（2009）. 光学材料抛光亚表面损伤检测及材料去除机理. 《国防科技大学学报》.
185. 石峰，戴一帆，彭小强，宋辞（2009）. 基于矩阵运算的光学零件磁流变加工的驻留时间算法. 《国防科技大学学报》.
186. 贾立德，王家伍，郑子文，李圣怡，戴一帆（2009）. 光学非球面形摆臂式轮廓法测量顶点曲率半径优化算法研究. 《仪器仪表学报》.DOI
187. 石峰，戴一帆，彭小强，宋辞（2009）. 高精度光学表面磁流变修形. 《光学精密工程》.
188. 戴一帆，吴冬良，王贵林（2009）. 光学加工中高频误差对散射损失比的影响. 《光学精密工程》.
189. 石峰，戴一帆，彭小强，康念辉，刘志军（2009）. 纳米金刚石磨料磁流变抛光材料去除机理与工艺研究. 《国防科技大学学报》.
190. Yifan Dai, Shanyong Chen, Nianhui Kang, Shengyi Li (2009). Error calculation for corrective machining with allowance requirements. The International Journal of Advanced Manufacturing Technology.DOI
191. Yifan Dai, Feng Shi, Xiaoqiang Peng, Shengyi Li (2009). Restraint of mid-spatial frequency error in magneto-rheological finishing (MRF) process by maximum entropy method. Science China Technological Sciences.DOI
192. Lin Zhen Zhou, Yifan Dai, Xuhui Xie, Shengyi Li (2009). Frequency-domain analysis of computer-controlled optical surfacing processes. Science China Technological Sciences.DOI
193. Ci Song, Yifan Dai, Xiaoqiang Peng, Shengyi Li, Feng Shi (2009). Deterministic magnetorheological finishing of optical aspheric mirrors. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
194. Chaoliang Guan, Yifan Dai, Ziqiang Yin, Fan Yang (2009). Freeform turning lathe with direct drives and aerostatic bearing. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
195. Shengyue Zeng, Yifan Dai, Shanyong Chen (2009). Subaperture stitching interferometer for large optics. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
196. Dongliang Wu, Yifan Dai, Guilin Wang (2009). Influence of optical surface error on scattering loss of optical mirror. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
197. Chaoliang Guan, Yifan Dai, Xu-Hui Xie, Ziqiang Yin (2009). Investigation on feedback control of linear motors in ultraprecision-machine feed-drive systems. Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena.DOI
198. 丁凌艳，戴一帆，陈善勇（2008）. 平面子孔径拼接测量研究. 《光学精密工程》.
199. 戴一帆，袁征，陈浩锋，尹自强（2008）. 热压多晶氟化镁的磁流变抛光研究. 《国防科技大学学报》.
200. 戴一帆，段纬然，王贵林，杨帆（2008）. 音圈电机驱动的快刀伺服系统建模与性能分析. 《国防科技大学学报》.
201. 王卓，吴宇列，戴一帆，李圣怡，周旭升（2008）. 光学材料研磨亚表面损伤的快速检测及其影响规律. 《光学精密工程》.
202. Zhuo Wang, Yulie Wu, Yifan Dai, Shengyi Li (2008). Subsurface damage distribution in the lapping process. Applied Optics.DOI
203. Yifan Dai (2008). Error Model Analysis of Optics Surfaces Grinding Processes with Elliptical Path. Hangkong jingmi zhizao jishu.
204. 张学成，戴一帆，李圣怡，彭小强（2007）. 基于CFD的磁射流抛光去除机理分析. 《国防科技大学学报》.
205. 胡皓，彭小强，戴一帆（2007）. 磁流变抛光液流变性测试研究. 《仪器仪表学报》.
206. 吴冬良，戴一帆，王贵林，陈善勇（2007）. 光学面形误差对环围能量比的影响. 《光学精密工程》.
207. 周旭升，李圣怡，戴一帆，郑子文，杨智（2007）. 光学表面中频误差的控制方法—确定区域修正法. 《光学精密工程》.
208. 贾立德，郑子文，戴一帆，李圣怡（2007）. 摆臂式非球面轮廓仪的原理与试验. 《光学精密工程》.
209. 周林，戴一帆，解旭辉，焦长君，李圣怡（2007）. 光学镜面离子束加工的可达性. 《光学精密工程》.
210. 贾立德，郑子文，李圣怡，戴一帆（2007）. 光学非球面坐标测量中位姿误差的分离与优化. 《光学精密工程》.
211. 彭小强，戴一帆，唐宇（2007）. 基于灰色预测控制的磁流变抛光液循环控制系统. 《光学精密工程》.
212. Xusheng Zhou, Shengyi Li, Yifan Dai, Xuhui Xie (2007). Optimized method for manufacturing large aspheric surfaces. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
213. Lin Zhen Zhou, Xuhui Xie, Yifan Dai, Changjun Jiao, Shengyi Li (2007). Ion beam figuring system in NUDT. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
214. Xuecheng Zhang, Yifan Dai, Shengyi Li, Xiaoqiang Peng (2007). Optimization of removal function for magnetorheological jet polishing. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
215. Shanyong Chen, Shengyi Li, Yifan Dai, Ziwen Zheng (2007). Testing of large optical surfaces with subaperture stitching. Applied Optics.DOI
216. Zhi Yang, Yifan Dai, Guilin Wang (2007). Use of wavelet in specifying optics. Acta Scientiarum Naturalium Universitatis Sunyatseni.
217. Yifan Dai (2007). Process Simulation of Line Contact Machining of Revolution Conic Surfaces. Hangkong jingmi zhizao jishu.
218. Yifan Dai (2007). Study on Precision Cutting Technology of Complex Shape Microparts. Hangkong jingmi zhizao jishu.
219. Yifan Dai (2007). Analysis of the Grinding Process of Optics Surfaces with Elliptical Path. Hangkong jingmi zhizao jishu.
220. 唐宇，戴一帆，彭小强（2006）. 磁流变抛光工艺参数优化研究. 《中国机械工程》.
221. 淳静，吴宇列，戴一帆，李圣怡（2006）. 模式搜索法在光纤有源自动对准中的应用. 《光学精密工程》.
222. 张学成，戴一帆，李圣怡，彭小强（2006）. 磁射流抛光时几种工艺参数对材料去除的影响. 《光学精密工程》.
223. 戴一帆，尚文锦，周旭升（2006）. 计算机控制小工具抛光技术中磨盘材料对去除函数的影响. 《国防科技大学学报》.
224. Shanyong Chen, Shengyi Li, Yifan Dai, Ziwen Zheng (2006). Iterative algorithm for subaperture stitching test with spherical interferometers. Journal of the Optical Society of America A.DOI
225. Shanyong Chen, Shengyi Li, Yifan Dai, Ziwen Zheng (2006). Lattice design for subaperture stitching test of a concave paraboloid surface. Applied Optics.DOI
226. Wenjin Shang, Yifan Dai, Xusheng Zhou (2006). The amendment of the removal function model in edge effect. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
227. Changjun Jiao, Shengyi Li, Yifan Dai (2006). Line-contact maching of conic surfaces of revolution and error analysis. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
228. Shanyong Chen, Shengyi Li, Yifan Dai (2006). An efficient iterative algorithm for subaperture stitching interferometry for aspheric surface. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
229. Yifan Dai (2006). Spot-Contact Machining of Conic Surfaces of Revolution Based on Elliptical Path. Hangkong jingmi zhizao jishu.
230. 淳静，吴宇列，戴一帆，李圣怡（2005）. 光纤有源器件封装制造中的自动对准方法研究. 《中国机械工程》.
231. Yifan Dai (2005). Line-Contact Machining of Conic Surfaces of Revolution and Error Analysis. Hangkong jingmi zhizao jishu.
232. 解旭辉，戴一帆，曹承凯，颜树华，周卫红（2004）. 大间隙下的磁悬浮测控系统设计与研究. 《仪器仪表学报》.
233. 周旭升，戴一帆，李圣怡，郑子文，王贵林（2004）. 非球面加工机床的设计. 《制造技术与机床》.
234. 彭小强，戴一帆，李圣怡，尤伟伟（2004）. 回转对称非球面光学零件磁流变成形抛光的驻留时间算法. 《国防科技大学学报》.
235. 吴冬良，戴一帆，郑子文（2004）. 基于模态分析的挠性接头角刚度测量研究. 《国防科技大学学报》.
236. 淳静，吴宇列，戴一帆，李圣怡（2004）. 激光二极管与单模光纤自动对准搜索算法. 《国防科技大学学报》.
237. 王贵林，戴一帆，郑子文（2004）. 光学表面的分形结构和表征算法. 《计量学报》.
238. 尤伟伟，彭小强，戴一帆（2004）. 磁流变抛光液的研究. 《光学精密工程》.
239. 杨智，戴一帆（2003）. 混合遗传算法在二元光学元件设计中的应用. 《全球化、信息化、绿色化提升中国制造业——2003年中国机械工程学会年会论文集（微纳制造技术应用专题）》.
240. 王贵林，李圣怡，戴一帆（2003）. 光学表面的分形特点与模拟表征算法. 《国防科技大学学报》.
241. 洪小丽，戴一帆（2003）. 改善电感测微仪二次测量电路精度的措施. 《国防科技大学学报》.
242. 王贵林，李圣怡，戴一帆（2003）. 光学非球面复合加工机床的设计与精度分析. 《中国机械工程》.
243. 杨军宏，尹自强，戴一帆（2002）. 基于ADAMS的二维转动平台运动学分析. 《机械》.
244. 王金娥，戴一帆，张学成（2002）. 基于COM的开放式数控系统软件模块通信方法的研究. 《国防科技大学学报》.
245. 王贵林，李圣怡，戴一帆（2002）. 空间相机SiC反射镜的制作. 《机械工程材料》.
246. 马东平，戴一帆（2002）. 六自由度装置滚转轴干扰源的诊断及其抑制. 《国防科技大学学报》.
247. 王宪平，戴一帆，李圣怡（2002）. 一般机构的解耦运动. 《国防科技大学学报》.
248. 王建平，戴一帆，洪晓丽（2002）. 精密机床神经网络法精度建模. 《国防科技大学学报》.
249. 王建敏，戴一帆，王宪平（2001）. 高速精密主轴径向误差的测试. 《国防科技大学学报》.
250. 刘阳，李圣怡，戴一帆（2001）. 基于CAD模型的工件定位算法研究. 《自动化学报》.
251. Bing Luo, Zhe-hui Lin, Shengyi Li, Yifan Dai (2001). Driving property of twist-roller friction mechanism in ultraprecision positioning system. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
252. Shengyi Li, Zhe-hui Lin, Bing Luo, Yifan Dai (2001). Gray-scale mask fabrication system for diffractive micro-optics. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
253. 李圣怡，戴一帆，彭小强（2000）. 超精密加工机床及其新技术发展. 《国防科技大学学报》.
254. 戴一帆，彭小强，王建敏（2000）. 微小零件加工机床设计研究. 《第一届国际机械工程学术会议论文集》.
255. 戴一帆，彭小强（2000）. 超精密车床伺服进给机构设计研究. 《光学精密工程》.
256. Yifan Dai (2000). Design of the Multi-throttle Air-Lubricated Hydrostatic Slide Guide and Its Stability Analysis. Zhongguo jixie gongcheng.
257. 戴一帆，王新峰，吴宇列（1999）. 超精密气浮式电容传感器系统. 《国防科技大学学报》.
258. 戴一帆，李圣怡，罗兵，彭莉（1999）. 扭轮摩擦驱动系统研究. 《国防科技大学学报》.
259. 戴一帆（1997）. 回转形薄壁零件砂带磨削的参数选择及精度控制. 《国防科技大学学报》.
260. 李圣怡，戴一帆（1997）. 超精密加工技术与现代武器制造. 《国防科技》.
261. 戴一帆，潘仲明，王世民（1997）. 基于仿射原理的活塞环仿形数控加工系统. 《国防科技大学学报》.
262. 戴一帆（1996）. 复杂形状薄壁零件加工的综合质量控制. 《国防科技大学学报》.

预印本

1. Guohui Li, Gangjie Luo, Cheng Huang, Chaoliang Guan, Yang Ou, Yifan Dai, Xiaoqiang Peng, Yupeng Xiong (2025). Study on the Coupling Influence of Temperature and Tool Rake Angle on the Ductile–Brittle Transformation of Monocrystalline Silicon. SSRN Electronic Journal.DOI

书籍章节

1. Chunyang Du, Hao Hu, Yifan Dai (2025). Ion Beam Polishing Technology. Springer tracts in mechanical engineering.DOI

书籍

1. Shengyi Li, Yifan Dai (2016). Large and Middle‐Scale Aperture Aspheric Surfaces. Wiley eBooks.DOI