张立强｜上海工程技术大学｜学者主页

2026

振幅变化下超声振动对钻削CFRP损伤抑制的影响

朱振宇，张旭，张立强

《工程塑料应用》

2026

基于分布式检测的舱段自动对接与系统仿真

许盼平，张立强，杨桐，吴楠，刘钢

《上海工程技术大学学报》

2026

Evolution of abrasive grain protrusion height in axial ultrasonic vibration-assisted grinding of CFRP with CBN grinding wheels

Man Zhao, Shenyu Qiu, X X Li, K Wang, Wei Zhang, Lihao Li, G H Liu, Liqiang Zhang, Steven Y. Liang

Composites Part B Engineering

DOI

2026

Deep-learning-enabled development of a high-dynamic-performance CFRP damping boring bar for chatter suppression

Jingdong Zhang, Guangyin Zhou, Junli Li, Gang Liu, Liqiang Zhang

Precision Engineering

DOI

2026

Research Progress on the Application of Intelligent Algorithms in Robotic Grinding

Feiteng Ji, Dazhong Wang, Shujing Wu, Liqiang Zhang

International Conference on Computer, Control and Robotics (ICCCR)

DOI

2026

Texture-geometry-based mesh quality assessment for automated fiber placement

Jingxuan Zhang, Wei Xiao, Junli Li, Gang Liu, Liqiang Zhang

CIRP journal of manufacturing science and technology

DOI

2026

End milling cutting force model considering tool path radius under partial engagement

zeyu zhou, Liqiang Zhang, Meihua Zhang, Yichen Jiang

Journal of Physics Conference Series

DOI

2025

多环装配及过盈量对缠绕成型CFRP砂轮基体结构性能的影响

尉凌霄，李军利，陆天尧，刘钢，张立强

《宇航材料工艺》

2025

考虑变形连续性的蒙皮镜像加工变形预测柔性方法

王娜娜，张立强，许洋洋，刘钢

《航空制造技术》

DOI

2025

TC4磨削表面晶粒取向演变及微观形貌试验研究

张志慧，赵嫚，王荣，朱思远，茅健，张立强

《航空制造技术》

DOI

2025

连续纤维增强聚合物复合材料3D打印工艺研究进展

苏文璐，钱波，茅健，张立强，刘钢

《航空制造技术》

DOI

2025

Design and chatter suppression of a CLD-structured CFRP boring bar for high-precision deep hole machining

Gang Liu, Licheng Lu, Wenlu Su, Junli Li, Qinglong An, Liqiang Zhang, Jian Mao

The International Journal of Advanced Manufacturing Technology

DOI

2025

Research on subsurface damage of CFRP cutting with biomimetic gradient micro-textured tools

Mengxue Gao, Wen Xu, Liangfei Hu, Yue Song, Peiwei Yao, Liqiang Zhang, Xuechang Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2025

Design and optimization of micro-textured tool for CFRP cutting based on response surface method

Peiwei Yao, Xu Zhang, Ying Pan, Liqiang Zhang, Liangfei Hu

Journal of Reinforced Plastics and Composites

DOI

2024

基于ABAQUS镜像铣削铝合金表面残余应力有限元分析

高秋阁，张立强，杨杰，钱栊

《航空制造技术》

2024

基于刀齿轨迹模型的五轴侧铣加工铣削力预测

桂昊，张立强，杨青平

《航空制造技术》

2024

Investigation of the Flow Stress Model for Cr4Mo4V Bearing Steel under Ultrasonic Vibration Conditions

Zhenmeng Luan, Man Zhao, Jian Mao, Gang Liu, Liqiang Zhang, Yixuan Feng, Steven Y. Liang

Metals

DOI

2023

Dynamic distributed flexible job-shop scheduling problem considering operation inspection

Kaikai Zhu, Guiliang Gong, Ningtao Peng, Liqiang Zhang, Dan Huang, Qiang Luo, Xiaoqiang Li

Expert Systems With Applications，Vol. 224

DOI

2023

基于数字孪生的装配车间调度模式

吴昕宇，张美华，张立强

《计算机时代》

2023

基于数字孪生的实时装配工时调度优化

吴昕宇，张美华，张立强

《上海工程技术大学学报》

2023

基于C3连续PH曲线的短线段拐角实时光顺算法

谢健，张立强，许洋洋，闫业翠

《计算机集成制造系统》

DOI

2023

基于接触区域的球头刀五轴加工无颤振刀具姿态研究

植俊杰，张立强，许洋洋，杨青平，曹珍珍

《计算机集成制造系统》

DOI

2023

连续与短切CF增强PA6复合材料双喷头3D打印工艺参数优化

苏文璐，卢立成，钱波，茅健，张立强，刘钢

《工程塑料应用》

2023

Analytical method to extract tool workpiece engagement from CAM data for five-axis machining stability prediction

Yangyang Xu, Liqiang Zhang, Nana Wang, Gang Liu

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2023

Analysis and Development of the CFRP Boring Bar for Stability Improvement

Licheng Lu, Can Ni, Gang Liu, Bo Qian, Qinglong An, Zhenzhen Cao, Liqiang Zhang, Junli Li

Fibers and Polymers

DOI

2022

Optimization of tool axis vector for mirror milling of thin-walled parts based on kinematic constraints

Long Qian, Liqiang Zhang, Qiuge Gao, Jie Yang

The International Journal of Advanced Manufacturing Technology

DOI

2022

A real-time corner smoothing and interpolation algorithm for short line segments to realize continuous motion of tool axis jerk

Liqiang Zhang, Jian Jun Xie, Yecui Yan, Gang Liu

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2022

Surface Quality Experimental Study on Rotary Ultrasonic Machining of Honeycomb Composites with a Circular Knife Cutting Tool

Gang Liu, Jie Yang, Liqiang Zhang, Qiuge Gao, Long Qian, Rongyao Zhang

Crystals

DOI

2022

Linear interpolation algorithm of machining tool path with curvature smoothing

Jie Yang, Liqiang Zhang, Gang Liu

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2022

Adaptive tool path generation for flank milling of thin-walled parts based on force-induced deformation constraints

Hao Gui, Liqiang Zhang, Yecui Yan

The International Journal of Advanced Manufacturing Technology

DOI

2021

基于FIR滤波的拐角轮廓误差精确插补算法

李冬冬，张立强，杨乐

《计算机集成制造系统》

DOI

2021

基于二阶矩信息的五轴数控机床几何误差建模

信世豪，张立强，李宇昊

《制造技术与机床》

DOI

2021

Tool path planning for flank milling of non-developable ruled surface based on immune particle swarm optimization algorithm

Yecui Yan, Liqiang Zhang, Jinwei Gao

The International Journal of Advanced Manufacturing Technology

DOI

2021

Cutter position optimization with tool runout for flank milling of non-developable ruled surfaces

Sen Kong, Yecui Yan, Liqiang Zhang, Qianqian Feng

The International Journal of Advanced Manufacturing Technology

DOI

2021

Theoretical Analysis and Experimental Validation of Micro-grinding Force Considering the Effect of Crystallographic Orientation

MAO Jian, ZHAO Man, Liqiang Zhang

Journal of Mechanical Engineering

DOI

2020

基于跳度约束的重叠拐角高速加工平滑算法

王勇，张立强，郭景浩

《计算机集成制造系统》

DOI

2020

基于非参数误差模型的镜像铣同步精度补偿

郭景浩，张立强，王勇，刘钢

《计算机集成制造系统》

DOI

2020

Accurate interpolation and contouring control algorithm based on FIR filters for the corner transition

Dong‐Dong Li, Liqiang Zhang, Le Yang, Jian Mao

The International Journal of Advanced Manufacturing Technology

DOI

2020

Numerical analysis of performance of different micro-grooved tools for cutting titanium alloy Ti-6Al-4V

Xuchao Miao, Xu Zhang, Xin Liu, Qianxi Yu, Liqiang Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2020

Performances of concave and convex microtexture tools in turning of Ti6Al4V with lubrication

Qianxi Yu, Xu Zhang, Xuchao Miao, Xin Liu, Liqiang Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2019

Five-axis CNC machine tool contour error control method

Le Yang, Liqiang Zhang, Dongdong Li

International Conference on Robotics, Intelligent Control and Artificial Intelligence (RICAI)

DOI

2019

Process Research Based on Wavelet Analysis in Chatter Monitoring

Yin Yabin, Liqiang Zhang

International Conference on Electronic Information Technology and Computer Engineering (EITCE)

DOI

2019

Comprehensive error modeling and compensation of five-axis mirror milling machine

Zhou Liuxin, Liqiang Zhang

International Conference on Electronic Information Technology and Computer Engineering (EITCE)

DOI

2019

Research on Jet-assisted Support and Post-processing Technology for Mirror Milling System

Bo Zhou, Liqiang Zhang

International Conference on Electronic Information Technology and Computer Engineering (EITCE)

DOI

2019

B-spline Interpolation methodology for Continuous Micro Line Segments Based on S-shaped velocity

Feng Qianqian, Liqiang Zhang

International Conference on Electronic Information Technology and Computer Engineering (EITCE)

DOI

2019

Corner smoothing interpolation algorithm based on PH curve

Dongdong Li, Liqiang Zhang

International Conference on Electronic Information Technology and Computer Engineering (EITCE)

DOI

2019

High‐Precision Extraction of Segment Points of 2D Profiles Based on a Dynamic Grid Method

Xu Zhang, Haibo Zhang, Liqiang Zhang, Jie Shen

Mathematical Problems in Engineering

DOI

2018

基于跳度约束的连续短线段高速加工运动学平滑算法

杜金锋，张立强，高甜

《计算机集成制造系统》

DOI

2018

Acceleration smoothing algorithm for global motion in high-speed machining

Jinfeng Du, Liqiang Zhang, Tian Gao

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2017

Acceleration smoothing algorithm based on jounce limited for corner motion in high-speed machining

Liqiang Zhang, Jinfeng Du

The International Journal of Advanced Manufacturing Technology

DOI

2016

Local Corner Smoothing Transition Algorithm Based on Double Cubic NURBS for Five-axis Linear Tool Path

Liqiang Zhang, Kai Zhang, Yecui Yan

Strojniški vestnik – Journal of Mechanical Engineering

DOI

2016

Single spherical angle linear interpolation for the control of non-linearity errors in five-axis flank milling

Kai Zhang, Liqiang Zhang, Yecui Yan

The International Journal of Advanced Manufacturing Technology

DOI

2016

Corner Smoothing Transition Algorithm for Five-axis Linear Tool Path

Yecui Yan, Liqiang Zhang, Kai Zhang

Procedia CIRP

DOI

2015

面向五轴加工的等距双NURBS刀具路径同步插补方法

张君，张立强，张守军，张凯

《计算机集成制造系统》

DOI

2015

Double NURBS trajectory generation and synchronous interpolation for five-axis machining based on dual quaternion algorithm

Jun Zhang, Liqiang Zhang, Kai Zhang, Jian Mao

The International Journal of Advanced Manufacturing Technology

DOI

2015

Mechanical assembly quality prediction method based on state space model

Jian Mao, Dejia Chen, Liqiang Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2014

基于对偶四元数的五轴等距双NURBS刀具路径规划

张立强，张守军，王宇晗

《计算机集成制造系统》

2012

飞行器总体多学科集成设计平台

孙建勋，张立强，陈建江，刘继红

《计算机集成制造系统》

2011

基于分层递阶模型的多轴加工过程分析与运动度量规划

张立强，王宇晗

《上海交通大学学报》

2011

Process modeling and toolpath optimization for five-axis ball-end milling based on tool motion analysis

Liqiang Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2009

五轴加工中进给速度的多约束自适应控制策略

张立强，王宇晗，陈明，王劲森

《上海交通大学学报》

2005

基于遗传算法的快速成型分层方向优化设计

张立强，向道辉，陈明，王斌修

《南京航空航天大学学报(自然科学版)》

2004

STL模型切片轮廓数据的修补与优化

王斌修，张立强

《组合机床与自动化加工技术》

精选作品

期刊论文

振幅变化下超声振动对钻削CFRP损伤抑制的影响

基于分布式检测的舱段自动对接与系统仿真

Evolution of abrasive grain protrusion height in axial ultrasonic vibration-assisted grinding of CFRP with CBN grinding wheels

Deep-learning-enabled development of a high-dynamic-performance CFRP damping boring bar for chatter suppression

Research Progress on the Application of Intelligent Algorithms in Robotic Grinding

Texture-geometry-based mesh quality assessment for automated fiber placement

End milling cutting force model considering tool path radius under partial engagement

多环装配及过盈量对缠绕成型CFRP砂轮基体结构性能的影响

考虑变形连续性的蒙皮镜像加工变形预测柔性方法

TC4磨削表面晶粒取向演变及微观形貌试验研究

连续纤维增强聚合物复合材料3D打印工艺研究进展

Design and chatter suppression of a CLD-structured CFRP boring bar for high-precision deep hole machining

Research on subsurface damage of CFRP cutting with biomimetic gradient micro-textured tools

Design and optimization of micro-textured tool for CFRP cutting based on response surface method

基于ABAQUS镜像铣削铝合金表面残余应力有限元分析

基于刀齿轨迹模型的五轴侧铣加工铣削力预测

Investigation of the Flow Stress Model for Cr4Mo4V Bearing Steel under Ultrasonic Vibration Conditions

Dynamic distributed flexible job-shop scheduling problem considering operation inspection

基于数字孪生的装配车间调度模式

基于数字孪生的实时装配工时调度优化

基于C3连续PH曲线的短线段拐角实时光顺算法

基于接触区域的球头刀五轴加工无颤振刀具姿态研究

连续与短切CF增强PA6复合材料双喷头3D打印工艺参数优化

Analytical method to extract tool workpiece engagement from CAM data for five-axis machining stability prediction

Analysis and Development of the CFRP Boring Bar for Stability Improvement

Optimization of tool axis vector for mirror milling of thin-walled parts based on kinematic constraints

A real-time corner smoothing and interpolation algorithm for short line segments to realize continuous motion of tool axis jerk

Surface Quality Experimental Study on Rotary Ultrasonic Machining of Honeycomb Composites with a Circular Knife Cutting Tool

Linear interpolation algorithm of machining tool path with curvature smoothing

Adaptive tool path generation for flank milling of thin-walled parts based on force-induced deformation constraints

基于FIR滤波的拐角轮廓误差精确插补算法

基于二阶矩信息的五轴数控机床几何误差建模

Tool path planning for flank milling of non-developable ruled surface based on immune particle swarm optimization algorithm

Cutter position optimization with tool runout for flank milling of non-developable ruled surfaces

Theoretical Analysis and Experimental Validation of Micro-grinding Force Considering the Effect of Crystallographic Orientation

基于跳度约束的重叠拐角高速加工平滑算法

基于非参数误差模型的镜像铣同步精度补偿

Accurate interpolation and contouring control algorithm based on FIR filters for the corner transition

Numerical analysis of performance of different micro-grooved tools for cutting titanium alloy Ti-6Al-4V

Performances of concave and convex microtexture tools in turning of Ti6Al4V with lubrication

Five-axis CNC machine tool contour error control method

Process Research Based on Wavelet Analysis in Chatter Monitoring

Comprehensive error modeling and compensation of five-axis mirror milling machine

Research on Jet-assisted Support and Post-processing Technology for Mirror Milling System

B-spline Interpolation methodology for Continuous Micro Line Segments Based on S-shaped velocity

Corner smoothing interpolation algorithm based on PH curve

High‐Precision Extraction of Segment Points of 2D Profiles Based on a Dynamic Grid Method

基于跳度约束的连续短线段高速加工运动学平滑算法

Acceleration smoothing algorithm for global motion in high-speed machining

Acceleration smoothing algorithm based on jounce limited for corner motion in high-speed machining

Local Corner Smoothing Transition Algorithm Based on Double Cubic NURBS for Five-axis Linear Tool Path

Single spherical angle linear interpolation for the control of non-linearity errors in five-axis flank milling

Corner Smoothing Transition Algorithm for Five-axis Linear Tool Path

面向五轴加工的等距双NURBS刀具路径同步插补方法

Double NURBS trajectory generation and synchronous interpolation for five-axis machining based on dual quaternion algorithm

Mechanical assembly quality prediction method based on state space model

基于对偶四元数的五轴等距双NURBS刀具路径规划

飞行器总体多学科集成设计平台

基于分层递阶模型的多轴加工过程分析与运动度量规划

Process modeling and toolpath optimization for five-axis ball-end milling based on tool motion analysis

五轴加工中进给速度的多约束自适应控制策略

基于遗传算法的快速成型分层方向优化设计

STL模型切片轮廓数据的修补与优化

会议论文

Collision-free Tool Path Generation for Five-axis High Speed Machining

研究方向