黄洪雁

2026

水面与水下燃料电池能源系统研究进展及展望

《哈尔滨工程大学学报》

2026

基于孔隙尺度的Kelvin结构复合相变材料融化性能

《化工进展》

DOI

2026

Performance analysis and economic evaluation of the ammonia decomposition turbine-less SOFC/supersonic jet engine hybrid system

Propulsion and Energy

DOI

2026

Performance evaluation and comparative analysis of a novel aviation SOFC-Turboprop hybrid system utilizing chemical recuperation for hydrogen production

Energy

DOI

2026

Thermodynamic performance and operational characteristics analysis of a decoupled SOFC-turbofan engine aviation hybrid system with chemical recuperation

Applied Thermal Engineering

DOI

2026

Dynamic characteristics evaluation and comparison between closed Brayton power generation system combined with thermal management system using SCO2 and CO2-SO2 mixture for hypersonic vehicles

Energy

DOI

2025

液氨-航空煤油化学回热燃料电池/涡轴发动机混合动力系统的设计与性能评估

《推进技术》

2025

高海拔环境下航空氢燃料电池综合性能分析

《电源技术》

2025

燃料电池无人机热管理方案性能对比分析

《新技术新工艺》

DOI

2025

Performance evaluation and optimization of CO2-based binary mixture closed-Brayton-cycle at high turbine inlet temperature for hypersonic vehicles under finite cold source

Applied Thermal Engineering

DOI

2025

Performance analysis of a turbofan engine integrated with flame-assisted fuel cells for combined propulsion and power generation with more electric aircrafts

Energy Conversion and Management

DOI

2025

Dynamic characteristics analysis of supercritical CO2 closed Brayton power generation system for hypersonic vehicles

Applied Thermal Engineering

DOI

2025

Thermodynamic performance analysis of a high-Mach low-carbon turbine engine system with integrated precooling and power generation system

International journal of hydrogen energy

DOI

2025

Investigation the thermodynamic performance of closed Brayton cycle with CO2-based binary mixtures for hypersonic vehicle power generation systems under finite cold source

Thermal Science and Engineering Progress

DOI

2024

Optimization of endwall profile for tail nozzle based on genetic algorithm

International Symposium on Sensors, Mechatronics, and Automation

DOI

2024

Thermal response time characteristics of endothermic hydrocarbon fuel in cooling channels with thermal cracking

Applied Thermal Engineering

DOI

2024

Experimental and numerical study of flow boiling heat transfer characteristics in rectangular groove-wall microchannels

International Journal of Heat and Mass Transfer

DOI

2024

Novel onboard High-Power electricity generation system of Closed-Brayton-Cycle enhanced by Multi-Stage LMMHD Generators: Coupling analysis with propulsion system

Applied Thermal Engineering

DOI

2024

Investigation of supercritical pressure hydrocarbon fuel heat transfer performance in rotating wing shape channels with different wing structural parameters

Case Studies in Thermal Engineering

DOI

2024

Study of the effect of rotating channel rib structure on fuel flow and heat transfer characteristics

Journal of Physics Conference Series

DOI

2023

Heat transfer performance investigation of rotating U-channel supercritical pressure hydrocarbon fuel with intermediate connection section

International Communications in Heat and Mass Transfer

DOI

2023

Effect of Rotating Channel Turning Section Clearance Size on Heat Transfer Characteristics of Supercritical Pressure Hydrocarbon Fuel

Energies

DOI

2023

Investigation of the flow and heat transfer performance of supercritical pressure hydrocarbon fuel in a novel rotating internal trapezoidal expansion channel

International Communications in Heat and Mass Transfer

DOI

2023

Hydrocarbon Fuel Flow and Heat Transfer Investigation in Rotating Channels

Energies

DOI

2023

Novel butterfly wing type rotating channel supercritical pressure hydrocarbon fuel heat transfer performance investigation

International Communications in Heat and Mass Transfer

DOI

2023

Thermal response modeling and analysis of hydrocarbon fuel transient flow and heat transfer at supercritical pressure

International Journal of Thermal Sciences

DOI

2022

超临界碳氢燃料蒸汽重整一维模型研究

《推进技术》

2022

Heat transfer characteristics of supercritical pressure hydrocarbon fuels in rotating trapezoidal channels

International Communications in Heat and Mass Transfer

DOI

2022

Analysis of energy cascade utilization in the chemically precooled engine cycle from a perspective of indirect combustion

Fuel

DOI

2022

Thermodynamic analysis for a novel chemical precooling turbojet engine based on a multi-stage precooling-compression cycle

Energy

DOI

2022

Assessment of thermodynamic performance and CO2 emission reduction for a supersonic precooled turbine engine cycle fueled with a new green fuel of ammonia

Energy

DOI

2022

Experimental investigations on transient flow and heat transfer characteristics of RP-3 at supercritical pressure

Applied Thermal Engineering

DOI

2022

Thermodynamic analysis for a novel steam Rankine cycle based indirect chemical precooled engine used for supersonic flight

Fuel

DOI

2022

Performance comparison of three chemical precooled turbine engine cycles using methanol and n-decane as the precooling fuels

Energy

DOI

2021

船舶汽轮机刹车工况数值模拟研究

《热能动力工程》

DOI

2021

Thermodynamic optimization of the indirect precooled engine cycle using the method of cascade utilization of cold sources

Energy

DOI

2021

Thermodynamic analysis of chemical precooled turbine combined engine cycle

Energy Conversion and Management

DOI

2019

Research of a combined power and cooling system based on fuel rotating cooling air turbine and organic Rankine cycle on hypersonic aircraft

Energy

DOI

2019

Performance improvement of gaseous hydrocarbon fuel driven thermal power generation systems for hypersonic vehicles

Energy Conversion and Management

DOI

2019

Investigation of hydrocarbon fuel rotating flow considering the variation of physical properties

International Journal of Heat and Mass Transfer

DOI

2019

Effect of flow losses in heat exchangers on the performance of organic Rankine cycle

Energy

DOI

2018

Investigation on Noise Control Technology of Ultra-High Expansion Ratio Turbine

Journal of Harbin Institute of Technology(New series)

2018

Performance analysis of low speed axial impulse turbine using two type nozzles for small-scale organic Rankine cycle

Energy

DOI

2018

Numerical Simulation of Flow and Heat Transfer in a Square Rotating U-Duct Using Hydrocarbon Fuel

ASME Journal of Heat and Mass Transfer

DOI

2018

Experimental study on the thermodynamic characteristics of the high temperature hydrocarbon fuel in the cooling channel of the hypersonic vehicle

Acta Astronautica

DOI

2018

Analysis on the Power Generation Scheme for Wide Speed Range Super/Hypersonic Air-Breathing Propulsion System

AIAA/ASME/SAE/ASEE Joint Propulsion Conference (JPC)

DOI

2018

Performance evaluation of a partially admitted axial turbine using R245fa, R123 and their mixtures as working fluid for small-scale organic Rankine cycle

Energy Conversion and Management

DOI

2018

A simplification of pyrolytic reaction model of hydrocarbon fuel and its application in simulation of heated channel flow

International Journal of Thermal Sciences

DOI

2018

Experimental and theoretical investigation of power generation scheme driven by thermal cracked gaseous hydrocarbon fuel for hypersonic vehicle

Energy Conversion and Management

DOI

2018

Backpressure propagation mode and balance property in a rectangular duct

Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering

DOI

2017

计算气动声学混合方法在涡轮降噪研究中的应用

《节能技术》

2017

Numerical study on dynamic characteristics for sharp opening procedure of boundary-layer suction slot

Acta Astronautica

DOI

2017

Numerical study on the influences of heat and mass transfers on the pyrolysis of hydrocarbon fuel in mini-channel

Applied Thermal Engineering

DOI

2017

Numerical investigation of distribution of reaction rate during convective heat transfer with endothermic chemical reaction

International Communications in Heat and Mass Transfer

DOI

2017

Investigation of corner separation and suction control in constant area duct

Aerospace Science and Technology

DOI

2017

Overall performance assessment for scramjet with boundary-layer ejection control based on thermodynamics

Energy

DOI

2016

超高膨胀比涡轮气动噪声控制技术研究

《哈尔滨工程大学学报》

2016

局部进气高速涡轮气动噪声控制方法研究

《节能技术》

2016

基于流道优化的局部进气高速涡轮机气动噪声控制实验研究

《推进技术》

2016

Numerical Investigation of Local Resistance to Backpressure in Hypersonic Inlet with Suction

Journal of Propulsion and Power

DOI

2016

Investigation of boundary-layer ejecting for resistance to back pressure in an isolator

Aerospace Science and Technology

DOI

2016

Coupling relationship analysis between flow and pyrolysis reaction of endothermic hydrocarbon fuel in view of characteristic time correlation in mini-channel

Applied Thermal Engineering

DOI

2015

考虑转捩的气冷涡轮气热和热弹耦合计算

《哈尔滨工业大学学报》

2015

高负荷涡轮机流动特性及变工况性能数值研究

《汽轮机技术》

2015

Modeling and analysis of heat and mass transfers of supercritical hydrocarbon fuel with pyrolysis in mini-channel

International Journal of Heat and Mass Transfer

DOI

2014

基于Gama-Theta转捩模型的气冷涡轮气热耦合研究

《推进技术》

2014

湍流、转捩模型对气冷涡轮气热耦合计算影响的对比研究

《热能动力工程》

2014

碳氢燃料热裂解与引发裂解换热对比实验

《化工学报》

2014

Experimental and Modeling Investigation of n-Decane Pyrolysis at Supercritical Pressures

Energy & Fuels

DOI

2014

Numerical analysis of convective heat transfer characteristics of supercritical hydrocarbon fuel in cooling panel with local flow blockage structure

The Journal of Supercritical Fluids

DOI

2012

带有冷气掺混的三级透平气动性能数值研究

《汽轮机技术》

2012

大膨胀比涡轮机三维非定常数值计算研究

《汽轮机技术》

2012

Flow field and heat transfer analysis of local structure for regenerative cooling panel

Journal of Thermal Science

DOI

2011

汽轮机静叶栅变冲角性能的实验研究

《实验流体力学》

2011

换热系数准则式在燃气涡轮耦合计算中的应用

《哈尔滨工业大学学报》

2010

燃气涡轮复杂结构冷却叶片数值研究

《工程热物理学报》

2010

大子午扩张涡轮的根部型线研究

《航空动力学报》

2010

边界元法在气冷涡轮叶栅气热耦合计算中的应用

《热能动力工程》

2010

高压气冷涡轮内冷通道换热系数准则式的研究

《工程热物理学报》

2010

Numerical investigation on bowed blades of large meridional expansion Turbine

Journal of Harbin Institute of Technology(New series)

2010

Investigation of convection cooling guide vane with conjugate heat transfer method

Journal of Harbin Institute of Technology(New series)

2010

Conjugate Heat Transfer Analysis of a High Pressure Air-Cooled Gas Turbine Vane

Volume 4: Heat Transfer, Parts A and B

DOI

2010

The Simulation Study of Turbulence Models for Conjugate Heat Transfer Analysis of a High Pressure Air-Cooled Gas Turbine

International Heat Transfer Conference (IHTC)

DOI

2009

静叶内弧中部热蒸汽喷射的数值研究

《哈尔滨工业大学学报》

2009

汽轮机空心静叶开缝抽吸除湿的数值模拟

《汽轮机技术》

2009

带有前缘气膜冷却燃气轮机叶片的气热耦合研究(英文)

Chinese Journal of Aeronautics

2009

水雾/蒸汽相变冲击冷却的数值模拟

《哈尔滨工程大学学报》

2009

湍流度对全气膜覆盖冷却叶片的影响

《工程热物理学报》

2009

湿蒸汽两相流动的非定常数值模拟

《汽轮机技术》

2009

大子午扩张涡轮的分离控制

《航空学报》

2009

气冷涡轮叶栅流动及热应力特性的数值研究

《科学技术与工程》

2009

冷却流量变化对叶栅冷却效果影响的数值模拟

《推进技术》

2009

大子午扩张涡轮过渡段的子午型线

《推进技术》

2009

Conjugate Calculation of Gas Turbine Vanes Cooled with Leading Edge Films

Chinese Journal of Aeronautics

DOI

2009

Coupled BEM and FDM Conjugate Analysis of a Three-Dimensional Air-Cooled Turbine Vane

DOI

2008

温度梯度对平板边界层转捩影响的数值模拟

《推进技术》

2008

高压燃气涡轮径向内冷叶片气热耦合的数值分析

《航空动力学报》

2008

考虑轴向间距变化的低速压气机Clocking效应的数值模拟

《推进技术》

2008

蒸汽轮机末级静叶沟槽除湿方法的数值模拟

《热能动力工程》

2008

某型燃机涡轮过渡段流场优化设计

《工程热物理学报》

2008

Numerical simulation of 3D viscous flow field of air cooled turbine blades with coolant mixing

Journal of Harbin Institute of Technology(New series)

2008

蒸汽轮机末级应用海豚型静叶的数值仿真

《吉林大学学报(工学版)》

2008

Effects of hot steam injection from the slot at the trailing edge on turbine nozzle vane flow field

Journal of Thermal Science

DOI

2007

气热耦合多孔气膜冷却流动的数值研究

《工程热物理学报》

2007

零压力梯度平板边界层转捩的数值模拟

《热能动力工程》

2007

带有压力梯度的平板边界层转捩数值模拟

《航空动力学报》

2006

空气冷却涡轮叶片气热耦合数值计算

《哈尔滨工业大学学报》

2006

涡轮叶栅三维气热耦合数值模拟

《节能技术》

2006

Design Optimization of Transonic Compressor Rotor Using CFD and Genetic Algorithm

DOI

2005

低速压气机中静叶Clocking效应的二维和三维数值模拟与实验结果验证

《工程热物理学报》

2005

端壁翼刀控制压气机叶栅二次流的机理研究

《空气动力学学报》

2005

载荷分布对叶栅损失影响的试验研究

《航空发动机》

2004

不同高度端壁翼刀对压气机叶栅二次流影响的数值模拟

《航空动力学报》

2004

Clocking effect in a two-stage compressor with different inter-blade-row gaps

Journal of Thermal Science

DOI

2003

低速压气机设计转速近喘振点流场试验研究

《航空发动机》

2003

平面扩压叶栅静叶相对位置改变对流动的影响

《工程热物理学报》

2003

动叶 clocking对低速压气机性能影响的数值模拟(英文)

Chinese Journal of Aeronautics

2003

Numerical Simulation of Rotor Clocking Effect in a Low-Speed Compressor

Chinese Journal of Aeronautics

DOI

2003

Fully Clocking Effect in a Two-Stage Compressor

DOI

2002

大间隙涡轮叶栅流场结构的研究

《航空动力学报》

2002

上端壁翘曲对涡轮叶栅流场的影响

《推进技术》

2002

有叶顶间隙的涡轮弯叶栅拓扑与旋涡结构(Ⅰ)——试验模型、端壁与叶片表面拓扑结构

《应用数学和力学》

2002

有叶顶间隙的涡轮弯叶栅拓扑与旋涡结构(Ⅱ)——横截面流场拓扑结构与叶栅旋涡结构

《应用数学和力学》

2002

Topology and vortex structures of a curving turbine cascade with tip clearance (I)—Experimental model and topological flow patterns on both endwalls and blade surfaces

Applied Mathematics and Mechanics

DOI

2002

Topology and vortex structures of a curving turbine cascade with tip clearance (II)—Topological flow pattern and vortex structure in the transverse section of a blade cascade

Applied Mathematics and Mechanics

DOI

2002

Topology and Vortex Structures of Turbine Cascade with Different Tip Clearances

Chinese Journal of Aeronautics

DOI

2000

基于区域分解算法的叶顶间隙流场的数值模拟

《工程热物理学报》

2000

不同积叠线形式对涡轮性能的影响

《工程热物理学报》

1999

采用弯扭叶片提高汽轮机运行性能

《节能技术》

1999

具有叶顶间隙的涡轮正弯叶栅流场的拓扑与旋涡结构

《空气动力学学报》

1999

叶片弯曲对叶顶间隙流动影响的实验研究

《航空学报》

1999

适用于舰用汽轮机的准三维设计体系

《热能动力工程》

1999

具有叶顶间隙叶栅的拓扑与旋涡结构及其对损失的影响

《汽轮机技术》

1999

直叶片积叠方式对涡轮性能的影响

《汽轮机技术》

1998

有间隙弯叶片近壁面静压分布对叶栅气动性能的影响

《工程热物理学报》

1997

具有叶顶间隙涡轮转子叶栅流动的拓扑及旋涡结构观测

《航空学报》

1997

叶片正弯曲对间隙流动损失的影响

《航空动力学报》

1997

具有静止顶部间隙透平叶栅气动特性的实验研究

《汽轮机技术》

1997

叶片正弯对间隙流动的影响

《工程热物理学报》

1997

用统计回归方法对叶栅出口气流角进行修正

《汽轮机技术》

1996

Influence of blade chordwise lean on development of cascade losses

Journal of Thermal Science

DOI

Performance analysis of an ammonia-kerosene dual-fuel novel SOFC-turboprop engine aviation hybrid system with chemical heat recovery

Fuel

DOI

Cooperative optimization of thermal management performance and power generation performance for novel ultra-high temperature airborne power generation system on hypersonic vehicles

Fuel

DOI

2008

非对称端壁对涡轮叶栅内二次流动的影响

《第四届中国CAE工程分析技术年会论文集》