宋克兴

期刊论文

1. 李纪渊，李韶林，宋克兴，周延军，曹军，曹飞，苏辉（2026）. 无卤直接涂镀工艺对镀钯铜线无空气焊球形貌的影响. 《材料工程》.
2. 王蒙蒙，李祥，徐然，徐鹏，朱倩倩，卢伟伟，宋克兴（2026）. 二元复合添加剂对超低轮廓电解铜箔微观结构的影响. 《电镀与涂饰》.
3. 侯振国，刘海涛，宋克兴，鲁龙龙，冯庆，操齐高（2026）. 电解铜箔用阴极辊纯钛组织调控研究进展. 《热加工工艺》.
4. 位恩慧，徐鹏，李祥，朱倩倩，卢伟伟，宋克兴（2026）. 极低轮廓铜箔表面纳米粗化工艺研究. 《电镀与涂饰》.
5. 曹飞，陶迪，李义全，李韶林，曹军，宋克兴，姜伊辉（2026）. 铜及铜合金的导电性能与抗氧化性能研究进展. 《材料热处理学报》.
6. 赵傲威，秦亚楠，曹书光，陈文利，葛文哲，国秀花，王强松，宋克兴（2026）. 深冷处理对Cu-Ni-Mn合金微观组织和力学性能的影响. 《特种铸造及有色合金》.DOI
7. 杨然，宋韶杰，刘飞龙，申熙美，宋克兴，刘峰（2026）. 累积叠轧焊Cu/Nb多层材料中的滑移传递. 《金属学报》.
8. 李韶林，朱莹莹，国秀花，王强松，孙文明，宋克兴（2026）. 基于调幅分解和多尺度析出协同作用的Cu-19Ni-6Cr-7Mn合金强化行为（英文）. Transactions of Nonferrous Metals Society of China.
9. Zhihua Wang, Xiu-Hua Guo, Jian-Guang Feng, Chao-Min Zhang, Kexing Song, Keke Qi, Yusen Duan, Kaiyue Li, Yan-Yan Fan (2026). Effect of Co addition and nano-Cr particle precipitation on the microstructure and arc erosion resistance of CuCr composites. Vacuum.DOI
10. Ya-Hui Liu, Qi Li, Qian-Qian Zhu, Lei Zhao, Zhen-Fang Shen, Meng-Na Zhang, Chengyong Li, Changjian Lu, Xuebin Zhang, Kexing Song (2026). 8Stress relaxation mechanism and microstructural evolution of CuCrZr alloy processed by dual-gradient thermomechanical rolling. Journal of Alloys and Compounds.DOI
11. Hao Hu, Shuaiyu Ma, Kexing Song, Ming-jiang Dai, Bo Sun, Haojie Cui, Lin Ji, Xujun Wang, Haoyan Cheng (2026). Unlocking Superior Mechanical Performance in Electrolytic Copper Foils Through Synergistic Competitive Additives. Langmuir.DOI
12. Hao Hu, Bo Sun, Kexing Song, Tao Huang, Yan-Jun Zhou, Shuaiyu Ma, Jun Cao, Kangjing Lu, Haoyan Cheng (2026). Unraveling interfacial synergies and design strategies for high-performance copper-graphene composite conductors: challenges, advances, and future directions. Advanced Composites and Hybrid Materials.DOI
13. Hao Hu, Bo Sun, Kexing Song, Zhipeng Zhao, Shuaiyu Ma, Lin Ji, Xujun Wang, Haoyan Cheng (2026). Unveiling the synergistic mechanism of binary additives for tailoring microstructure and enhancing the properties of high-performance electrodeposited copper foils. Electrochimica Acta.DOI
14. Zhenfang Shen, Yahui Liu, Lei Zhao, Mengna Zhang, Qianqian Zhu, Zhonghan Jiang, Yunqi Shan, Changjian Lu, Guoshang Zhang, Yonghao Zhao, Kexing Song (2026). Cryogenic rolling-induced nanotwins and nano-precipitates: A dual-enhancement strategy for Cu-Ni-Si alloys. Materials Characterization.DOI
15. Yanmin Zhang, Zhen Wang, Yaoke Xu, FeiYue Liu, Shikang Zhou, Xiangyang Xue, Chengchao Niu, Kexing Song, Jiang Feng (2026). Study on microstructure, properties and precipitation kinetics of Cu-3Ti-1.2 Mg alloy under three-stage aging. Materials Characterization.DOI
16. Yiying Miao, Jingzhao Yang, Yanjun Zhou, Tao Huang, Huiwen Guo, Kexing Song (2026). Study on the evolution of strength and stress of C18150 strips under different annealing temperatures. Journal of Alloys and Compounds.DOI
17. S.H. Zhou, Yanmin Zhang, FeiYue Liu, Xiangyang Xue, Kexing Song, Zhen Wang, YaoKe Xu, Miaomiao Wang (2026). Effect of Ag and Al Additions on the Strength and Plasticity of As-Cast Cu-7Fe Alloy Based on First-Principles Calculations. JOM.DOI
18. Bo Sun, Haoyan Cheng, Kexing Song, Tao Huang, Shuaiyu Ma, Haojie Cui, Kangjing Lu, Jun Ci Cao, Yanjun Zhou, Hao Hu (2026). Resolving the bonding and electron transport dilemma for ultra-high conductivity in titanium-enhanced copper/graphene composites. Materials Today Physics.DOI
19. Haitao Liu, Jincan Dong, Weiqiang Li, 化云 肖, Kexing Song (2026). Effect of the evolution behavior of precipitated phases during high-temperature aging on the microstructure and properties of Cu-Al-Sc alloy. Journal of Alloys and Compounds.DOI
20. Meng He, Qianqian Zhu, Yahui Liu, Weiwei Lu, Yanjun Zhou, Hao Hu, Xiao Cao, Longlong Lu, Peng Xu, Jia Shuguo, Kexing Song (2026). Grain size dependent epitaxial growth behavior and microstructural evolution of copper electrodeposition on titanium substrate. Materials Today Chemistry.DOI
21. Zhen Wang, Yanmin Zhang, YaoKe Xu, FeiYue Liu, S.H. Zhou, Xiangyang Xue, Chengchao Niu, Jiang Feng, Kexing Song (2026). Effect of Mg addition on the microstructure, properties, and precipitation behavior of Cu-3Ti alloy. Journal of Alloys and Compounds.DOI
22. Yiying Miao, Jingzhao Yang, Yanjun Zhou, Yu Song, Song Yu, Tao Huang, Huiwen Guo, Kexing Song (2026). The influence of short-term annealing on the microstructure and residual stress to the mechanical properties of C18150 alloy strip. Materials Science and Engineering A.DOI
23. Lanqing Niu, Shuguo Jia, Shizhong An, Kexing Song, Kexing Song, Haitao Liu, Chu Chun Cheng, Bo Wang, N Wang, Deqing Niu (2026). Effect of hot rolling on corrosion resistance of Cu-7Ni-3Al-1Fe-1Mn-0.02Sm alloy. Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control.DOI
24. Xiangyang Xue, Yanmin Zhang, Feiyue Liu, S.H. Zhou, Hao Chen, Kexing Song (2026). Effect of Ag microalloying on deformation heterogeneity and substructure evolution in cryorolled Cu-6.2 wt% Fe alloys. Journal of Alloys and Compounds.DOI
25. 李伟强，刘海涛，王梦娜，郭慧稳，周延军，朱治愿，岳鹏飞，张国赏，宋克兴（2025）. 微量碱土金属Sr对纯铜导电率和热稳定性的影响. 《铜业工程》.
26. 李彦坤，卢伟伟，许爱荣，刘海涛，程楚，宋克兴，陈晨，田静，崔育涛（2025）. 一次电解精炼高杂质含量阳极铜制备5N高纯铜的研究. 《电镀与涂饰》.DOI
27. 王秋月，卢琼琼，程楚，刘焱，刘海涛，张树辉，朱一明，田静，李晓恒，岳鹏飞，张国赏，宋克兴（2025）. 电解液中添加十六烷基三甲基溴化铵对电解精炼铜中铜离子沉积行为和银含量的影响. 《电镀与涂饰》.DOI
28. 宋克兴，华云筱，刘海涛，张彦敏，张朝民，周延军，皇涛（2025）. 微量稀土铈对含硫纯铜热变形行为的影响（英文）. Transactions of Nonferrous Metals Society of China.
29. 鲁龙龙，张彦敏，宋克兴，刘海涛，王昭东，冯庆，操齐高（2025）. 电解铜箔阴极辊用工业纯钛TA1热变形行为研究. 《热加工工艺》.DOI
30. 曹飞，王若斯，陶迪，刘元熙，李韶林，曹军，宋克兴，姜伊辉（2025）. 铜基键合线的键合界面调控研究进展. 《材料热处理学报》.
31. 赵世恒，冯江，张彦敏，张朝民，赵培峰，单运启，皇保欢，宋克兴（2025）. Cr含量对固溶态Cu-Ni-Co-Si-Mg合金组织性能的影响. 《材料热处理学报》.
32. 陈晨，程楚，刘海涛，宋克兴，田静，卢伟伟，李晓恒，李彦坤，崔育涛（2025）. 铜电解精炼添加剂作用及研究进展. 《有色金属科学与工程》.DOI
33. 龙飞，宋克兴，张召琦，王策，何鹏，孙军（2025）. 铜与异种材料钎焊的研究进展. 《稀有金属材料与工程》.
34. 梁十军，刘海涛，张彦敏，宋克兴，郭慧稳，郭引刚（2025）. 晶界工程对微合金化纯铜导电性和热稳定性的影响. 《特种铸造及有色合金》.DOI
35. 冯江，张彦敏，周延军，赵世恒，单运启，宋克兴（2025）. 高性能Cu-Ni-Si系合金成分设计与性能研究进展. 《材料热处理学报》.
36. 范世林，杜娟，杨少丹，周延军，宋克兴，张国赏，岳鹏飞，杨冉，王晓军（2025）. Cu-15Ni-8Sn合金在含S2-的3.5%NaCl溶液中的腐蚀行为. 《中国腐蚀与防护学报》.
37. 翟奕涵，皇涛，邢兵辉，张朝民，相楠，宋克兴（2025）. 电辅助条件下钛-铝层状复合板力学性能与微观组织研究. 《精密成形工程》.
38. 王智超，李韶林，宋克兴，张朝民，周延军，柳亚辉，孙俊杰，曹军（2025）. 不同连铸工艺对纯铜杆坯组织性能的影响. 《材料热处理学报》.
39. 岳鹏飞，史荣豪，龚朕，张国赏，杨少丹，朱治愿，宋克兴（2025）. 金属材料塑性功热转化的研究进展. 《河南科学》.
40. 葛文哲，曹书光，张彦敏，秦亚楠，陈文利，赵傲威，宋克兴，王强松（2025）. Cu-Ni-Cr系合金研究现状与发展趋势. 《中南大学学报(自然科学版)》.
41. 齐柯柯，国秀花，李韶林，宋克兴，冯江，段玉森，宋昊，王志华（2025）. 增强相类型对铝基复合材料载流摩擦磨损行为的影响. 《复合材料学报》.DOI
42. 徐鹏，乔灵慧，卢伟伟，朱倩倩，刘海涛，宋克兴（2025）. 高强电解铜箔微观组织结构与性能调控机制研究. 《铜业工程》.
43. Ran Yang, Hao Jiang, Jiang Feng, Yanjun Zuo, Feng-Shou Zhang, Yan-Jun Zhou, Xue-Bin Zhang, Wen-hao Yang, Weiyi He, Kexing Song (2025). Hot deformation behavior and microstructure evolution of the Cu-7Ni-7Al-4Fe-2Mn(-0.6Cr) alloys. Journal of Alloys and Compounds.DOI
44. Binbin Wang, Ya-Hui Liu, Qian-Qian Zhu, Yan-Jun Zhou, Hailong Wang, Q. Feng, Jiang Feng, Lei Zhao, Meng-Na Zhang, Qi Li, Jing Chen, Kexing Song (2025). Study on the correlation between annealing temperature and the gradient microstructure and residual stress in lead frame copper strip. Journal of Alloys and Compounds.DOI
45. Yunqi Shan, Yan-Min Zhang, Chao-Min Zhang, Jiang Feng, Baohuan Huang, Shiheng Zhao, Kexing Song (2025). Study on the microstructure evolution and strengthening mechanism of Cu-Ni-Si alloy after two-stage rolling and aging. Materials & Design.DOI
46. Qi Li, Ya-Hui Liu, Qian-Qian Zhu, Yan-Jun Zhou, Jiang Feng, Hailong Wang, Qingxiang Chen, Xuebin Zhang, Meng-Na Zhang, Lei Zhao, Binbin Wang, Yunxiang Li, Kexing Song (2025). Deformation behavior during low-temperature rolling and the multi-scale evolution mechanism of macro and microstructures in CuCrZr alloy. Journal of Alloys and Compounds.DOI
47. Hanjiang Wu, Tao Huang, Kexing Song, Yan-Jun Zhou, Shao-Lin Li, Xiao-Lan Peng, Y. Hua, Yi-Zhe Xu, Xiangyun Han, Ximeng Luo (2025). Microstructure and Properties of Single Crystal Copper Prepared by Hot Type Horizontal Continuous Casting Process. Materials Science & Engineering: A.DOI
48. Baohuan Huang, Yan-Min Zhang, Yunqi Shan, Shiheng Zhao, Kexing Song (2025). Effect of Dual Rolling with Double Aging on Properties of Cu-Ni-P Alloy. Materials Today Communications.DOI
49. Jun Cao, Wei-Long Liu, Junwei Wei, Huiyi Tang, Xiaoyu Shen, Yong Ding, Kexing Song, Yan-Jun Zhou, Chengqiang Cui (2025). Advances in Copper Wire Bonding Technology: Material Optimization, Interfacial Strength Bonding Interface Reliability, and Corrosion Resistance. Journal of Alloys and Compounds.DOI
50. Zhen Wang, Yan-Min Zhang, Yaoke Xu, Jiang Feng, Kexing Song, Feiyue Liu, Shikang Zhou, Xiangyang Xue, Yan-Fang Ma (2025). Synergistic Enhancement of Strength, Plasticity, and Electrical Conductivity in Cu–3Ti Alloy: Process Optimization and Mechanism Analysis. Advanced Engineering Materials.DOI
51. Chenyang Ge, Yan-Jun Zhou, Hailin Jing, Xu Gao, Shao-Dan Yang, M. Ma, Cun-Li Feng, Jinyu Liu, Jibao Li, Ji-dong Chen, Shao-Lin Li, Kexing Song (2025). Large Strain Continuous Deformation Induces the Formation of Nanotwins and Microbands to Synergistically Improve the Strength and Electrical Conductivity of Cu-0.3Sn Alloy Wires. Journal of Alloys and Compounds.DOI
52. Shao-Dan Yang, Yan-Jun Zhou, Haoran Wu, Yunqi Shan, Chenyang Ge, Juan Du, Lei Zhao, Ran Yang, Zhiyuan Zhu, Xu Gao, Weiyang Long, Kai Sun, Yong-Hao Zhao, Kexing Song (2025). Achieving 1.2 GPa Tensile Strength in Cu–15Ni–8Sn Alloy via Large-Strain Rotary Swaging: Multi-scale Microstructure Evolution and Strengthening Mechanisms. Materials Science & Engineering: A.DOI
53. Hao Jiang, Ran Yang, Xue-Bin Zhang, Yan-Jun Zhou, Kexing Song, Jiang Feng, Shuhui Huang, Yan Yu, Wen-hao Yang (2025). Tailoring κ phase via adding Cr to achieve strengthening-toughening of Cu-7Ni-7Al-4Fe-2Mn alloy. Materials & Design.DOI
54. Tao Huang, Yi-Han Zhai, Bing-Hui Xing, Chao-Min Zhang, Nan Xiang, Kexing Song, Wenjing Zhang, Lei Shi (2025). Construction and application of two intrinsic models for Ti-Al composite plates considering current parameters. Materials Research Express.DOI
55. Yan-Jun Zhou, Kai-xuan Jiang, Shao-Dan Yang, Ran Yang, Peng-Fei Yue, Fei Zhou, Wen-hao Yang, Juan Du, Hui-Wen Guo, Xiao-Lan Peng, Jing-Zhao Yang, Kexing Song (2025). Synergistic improvement of ultra-high strength and ductility of Cu-15Ni-8Sn alloy induced by multi-pass rotary swaging and aging treatment. Journal of Alloys and Compounds.DOI
56. Fei Zhou, Yan-Jun Zhou, Jiang Feng, Longlong Lu, Ran Yang, Shao-Dan Yang, Jibao Li, Ji-dong Chen, Kexing Song (2025). Mechanism of dynamic recrystallization in Cu-9Ni-6Sn alloy during hot deformation promoted by Mn: a dynamic thermal simulation study. Journal of Materials Science.DOI
57. Qi Li, Ya-Hui Liu, Qian-Qian Zhu, Yan-Jun Zhou, Jiang Feng, Hailong Wang, Qingxiang Chen, Xuebin Zhang, Binbin Wang, Xiaokang Yang, Kexing Song (2025). Study on the mechanism of microstructure and strength-ductility regulation in CuCrZr Alloy via dual-gradient temperature-controlled rolling and aging treatments. Materials Science & Engineering: A.DOI
58. Yan-Jun Zhou, Wen-hao Yang, Shao-Dan Yang, Ran Yang, Hui-Wen Guo, Fei Zhou, Jibao Li, Ji-dong Chen, Kexing Song (2025). Ordered phase transformation and nanotwin formation of Cu-15Ni-8Sn-0.2Nb alloy induced by cold deformation aging to achieve ultra-high strength and good plasticity. Materials Science & Engineering: A.DOI
59. Shiheng Zhao, Jiang Feng, Yan-Min Zhang, Chao-Min Zhang, Yunqi Shan, Baohuan Huang, Yaopeng Yang, Hao Jiang, Wen-hao Yang, Kexing Song (2025). Mechanism of Cr enhancement on stress relaxation resistance in Cu–Ni–Co–Si–Mg alloys. Journal of Alloys and Compounds.DOI
60. Shao-Dan Yang, Yan-Jun Zhou, Haoran Wu, Ran Yang, Wen-hao Yang, Hongfei Zhang, Rong-Hao Shi, Fei Zhou, Lili Xiao, Zhiyuan Zhu, Juan Du, Kexing Song (2025). Ultrahigh Strength Cu–15Ni–8Sn alloy: Rotary Swaging Induces Twin Strengthening and Regulates γ (DO3) Phase Precipitation. Materials Science & Engineering: A.DOI
61. Li-Yan Dong, Qiang-Song Wang, Yuan Wu, Haofeng Xie, Junru Gao, X. Chai, Kexing Song (2025). Effect of Process Conditions on Microstructure, Damping Capacity, and Mechanical Properties of Mn-Cu Alloys. Materials.DOI
62. Li-Yan Dong, Qiang-Song Wang, Yuan Wu, Haofeng Xie, Jinchun Ren, Junru Gao, X. Chai, Kexing Song (2025). Effects of Mn segregation on mechanical properties and damping capacity of Mn-Cu-Al-Fe-Ni damping alloy. Materials Today Communications.DOI
63. Junru Gao, Qiang-Song Wang, Li-Yan Dong, Jinchun Ren, X. Chai, Kexing Song (2025). Construction and corrosion resistance mechanism of BTA passivation film on B30 cupronickel. Surface & Coatings Technology.DOI
64. Shao-Lin Li, Shuai-Bin Li, Wenming Sun, Qiang-Song Wang, Kexing Song (2025). Precipitation Behavior and Properties Evolution of Cu-1.16Ni-0.36Cr Alloy During Heat Treatment. Materials.DOI
65. Weiyang Long, Yi-Fan Yan, Ming-Zhu You, Haoran Wu, Zheng Wei, Hongfei Zhang, Shao-Dan Yang, Zhiyuan Zhu, Kexing Song (2025). High-performance W–Cu composites preparation technology, modulation strategy and strengthening mechanism. Journal of Materials Research and Technology.DOI
66. Yanmin Zhang, Zhen Wang, Shiheng Zhao, Jiang Feng, Kexing Song, YaoKe Xu, F.H. Liu, S.H. Zhou, XiangYang Xue, Chengchao Niu (2025). Effect of Cr addition on microstructure and properties of Cu-Ni-Co-Si-Mg alloys. Journal of Alloys and Compounds.DOI
67. Bo Sun, Haoyan Cheng, Kexing Song, Tao Huang, Yuzhe Wang, Shuaiyu Ma, Haojie Cui, Dejiang Yu, Yan Wang, Hao Hu (2025). Unlocking ultra-high conductivity in copper/graphene composites through molecular synergistic functionalized graphene coatings via bridged interface engineering. Composites Communications.DOI
68. Chunxiang Xu, Xiaowen Peng, Bin Yang, Kexing Song, Yunxiao Hua, Haitao Liu, Tao Huang (2025). The effect of trace rare earth La element on the recrystallization behavior of oxygen-free copper. Journal of Materials Research and Technology.DOI
69. Longlong Lu, Haitao Liu, Fei Zhou, Qianqian Zhu, Weiwei Lü, Qingling Feng, Bo Jia, Xiangkui Yang, Zhaodong Wang, Kexing Song (2025). Recrystallization mechanisms and texture evolution in commercially pure titanium for cathode rollers during thermomechanical processing. Journal of Alloys and Compounds.DOI
70. S.J. Li, Jiyuan Li, Kexing Song, Yanjun Zhou, Jun Ci Cao, Fei Cao, Hui Su, Zhichao Wang (2025). Nanostructure-dictated bonding strength: thermal transfer & diffusion barrier in palladium coatings on copper wires. Vacuum.DOI
71. Peng Xu, Weiwei Lu, Li Qiao, Qianqian Zhu, Haitao Liu, Kexing Song (2025). Advanced design of electrodeposited copper foil: Modulating grain growth and microstructure to achieve ultrahigh mechanical properties. Journal of Alloys and Compounds.DOI
72. Hanjiang Wu, Tao Huang, Kexing Song, Yanjun Zhou, Shaolin Li, Yanmin Zhang, Xiaowen Peng, Yunxiao Hua (2025). Evolution characteristics of microstructure during continuous drawing deformation of Cu-20Ag alloy. Journal of Materials Research and Technology.DOI
73. Chunxiang Xu, Xiaowen Peng, Bin Yang, Kexing Song, Yunxiao Hua, Haitao Liu, Tao Huang (2025). The effect of trace rare earth La element on the microstructure and properties of deformed oxygen-free copper. Journal of Alloys and Compounds.DOI
74. Yanmin Zhang, Yunqi Shan, Yaopeng Yang, Zaoli Zhang, Yanjun Zhou, Xiuhua Guo, Tao Huang, Kexing Song (2025). Microstructural evolution of C1720W microfilament for fuzz buttons during service. Materials Today Communications.DOI
75. Jincan Dong, Haitao Liu, Weiqiang Li, Zhenguo Hou, Zihao Zhang, Siyu Zhang, Kexing Song (2025). Corrigendum to ’Effect of Al/Sc atomic ratio on the electrical conductivity, mechanical properties, and thermal stability of pure copper’ [J. Alloys Compd., 1034 (2025) 181415 /JALCOM-D-25–03936]. Journal of Alloys and Compounds.DOI
76. Jincan Dong, Haitao Liu, Weiqiang Li, Zhenguo Hou, Zihao Zhang, Siyu Zhang, Kexing Song (2025). Effect of Al/Sc atomic ratio on the electrical conductivity,mechanical properties, and thermal stability of pure copper. Journal of Alloys and Compounds.DOI
77. Chu Chun Cheng, Chen Chen, Haitao Liu, Mengxin Wang, Xiaoheng Li, Qiongqiong Lu, Jing Tian, Guoshang Zhang, Pengfei Yue, Yan Gao, Kexing Song (2025). Migration behavior and distribution of silver in copper electrorefining process. Materials Today Communications.DOI
78. Zihao Zhang, Haitao Liu, Yunxiao Hua, Baofeng Zhang, Zhenguo Hou, Weiqiang Li, Jincan Dong, Kexing Song (2025). Effect of phosphorus on stacking fault energy and tensile properties of oxygen-free copper. Journal of Materials Research and Technology.DOI
79. Longlong Lu, Haitao Liu, Kexing Song, Fei Zhou, Yanmin Zhang, Zhenguo Hou, Qianqian Zhu, Yingang Guo, Zhaodong Wang (2025). Grain refinement mechanism, static recrystallization and texture evolution of commercially pure titanium with trace yttrium addition. Materials Characterization.DOI
80. Kexing Song, Yunxiao Hua, Hai-tao LIU, Yanmin Zhang, C. S. Zhang, Yan-jun ZHOU, Tao Huang (2025). Effect of trace cerium addition on hot deformation behavior of ultrahigh-purity copper containing sulfur. Transactions of Nonferrous Metals Society of China.DOI
81. Yingying Zhu, S.J. Li, Xiuhua Guo, Kexing Song, Qiangsong Wang, Wenming Sun (2025). Improved corrosion resistance of Cu-19Ni-6Cr-7Mn induced by dense oxides accumulation. Materials Today Communications.DOI
82. Peng Xu, Weiwei Lu, Qianqian Zhu, Hao Hu, Haitao Liu, Binfeng Fan, Qingfu Wang, Xiangkui Yang, Kexing Song (2025). Positively-charged graphene mediate the crystal growth and microstructure to achieve ultrahigh mechanical properties of electrodeposited copper foils. Journal of Materials Research and Technology.DOI
83. Chenyang Ge, S.J. Li, Kexing Song, Xiuhua Guo, Yanjun Zhou, Yahui Liu, Haitao Liu, Chaomin Zhang, Jun Ci Cao, Fei Cao, Junjie Sun (2025). Electrical conduction behavior in multiscale microstructure of Y micro-alloyed single-crystal copper processing wires. Journal of Materials Research and Technology.DOI
84. Keke Qi, S.J. Li, Xiuhua Guo, Kexing Song, Yusen Duan, Zhihua Wang, Hao Jie Song, Song Liu (2025). Suppression of current-carrying friction damage behavior of 6063Al matrix composites by high-temperature strengthening. Journal of Materials Research and Technology.DOI
85. Yankun Li, Airong Xu, Haitao Liu, Chu Chun Cheng, Chen Chen, Kexing Song, Jing Tian, Yingang Guo, Weiwei Lu (2025). Electrolytic refinement of silver-enriched copper anodes for producing high-purity cathode copper utilizing ionic liquid additives. Materials Chemistry and Physics.DOI
86. Peng-Fei Yue, Shaodan Yang, Yan Feng Gao, Ronghao Shi, Guoshang Zhang, Zhiyuan Zhu, Dong Kyun Han, Kexing Song (2025). Progress in Plastic Work–Heat Conversion of Metallic Crystals. Crystals.DOI
87. Zhenguo Hou, Haitao Liu, Longlong Lu, Weiqiang Li, Zihao Zhang, Weiwei Lu, Qingling Feng, Bo Jia, Kexing Song (2025). Improvement of grain refinement, homogeneity and thermal stability of commercially pure titanium by trace scandium alloying. Materials Characterization.DOI
88. Xu Wang, Kexing Song, Yiming Zhang, Jiandong Xing, Jiang Feng, Tao Huang (2025). Preparation and anti-welding properties of dual-particle hybrid CuW composites based on binary stacking theory. Journal of Materials Science.DOI
89. Hao Song, Shaolin Li, Xiuhua Guo, Kexing Song, Song Liu, Keke Qi (2025). Strength-plasticity synergistic enhancement of dispersion strengthened copper by interaction of nano-Al2O3 and Cr particles. Materials & Design.DOI
90. Weiqiang Li, Haitao Liu, Zhenguo Hou, Zihao Zhang, Jincan Dong, Mengna Wang, Huiwen Guo, Kexing Song (2025). Effects of Al and Sc on conductivity and thermal stability of pure copper. Materials Characterization.DOI
91. 何萌，贾淑果，朱倩倩，谷宗治，卢伟伟，徐鹏，柳亚辉，杨斌，宋克兴（2024）. 阴极钛材表面处理工艺对其表面状态及铜离子电沉积初期行为的影响. 《精密成形工程》.
92. 凌羽，卢伟伟，宋克兴，刘海涛，武玉英，杨祥魁，樊斌锋，王庆福（2024）. 低轮廓电解铜箔表面微细粗化工艺研究. 《精密成形工程》.
93. 葛晨阳，国秀花，李韶林，宋克兴，周延军，刘海涛，张朝民，曹军，曹飞，高岩（2024）. 稀土Y对铜线材抗氧化行为的影响机理研究. 《表面技术》.
94. 皇涛，吴捍疆，宋克兴，张彦敏，周延军，李韶林（2024）. 线径压缩率对微细铜线材拉拔变形的影响（英文）. Transactions of Nonferrous Metals Society of China.
95. 张少强，卢伟伟，宋克兴，刘海涛，武玉英，杨祥魁，樊斌锋，王庆福（2024）. 附载体极薄铜箔中新型无机/有机复合剥离层的研究. 《电镀与涂饰》.
96. 陈晨，程楚，刘海涛，田静，卢伟伟，李晓恒，李彦坤，崔育涛，宋克兴（2024）. 铜电解精炼技术研究现状及展望. 《绿色矿冶》.
97. 宋昊，国秀花，李韶林，宋克兴，徐国杨，齐柯柯，刘嵩（2024）. 冷轧变形量对Al2O3/Cu复合材料组织和性能的影响. 《复合材料学报》.
98. 陈文利，秦亚楠，徐冬霞，王强松，宋克兴（2024）. 阻尼合金研究现状. 《精密成形工程》.
99. 朱玉锁，孟兆洁，周延军，张国赏，苏彦庆，宋克兴（2024）. 干摩擦条件下载荷和频率对Cu-15Ni-8Sn合金摩擦磨损性能影响研究. 《精密成形工程》.
100. 张懿铭，宋克兴，国秀花，皇涛，冯江，王旭，李韶林，钟建英，李凯（2024）. 基于二元堆积理论高致密CuW复合材料制备及耐电弧侵蚀性能研究. 《表面技术》.
101. 黎琦，张学宾，柳亚辉，周延军，宋克兴，王海龙，陈清香，李云翔（2024）. C18150合金冷轧时效过程中微结构及性能演化机理. 《有色金属(中英文)》.
102. 皇保欢，张彦敏，李吉宝，杨耀鹏，高红姣，冯江，张朝民，宋克兴（2024）. 均匀化退火对Cu-Ni-P合金组织和性能的影响. 《材料热处理学报》.
103. 单运启，张彦敏，张朝民，刘爱奎，冯江，赵世恒，皇保欢，宋克兴，周延军（2024）. 形变热处理对Cu-Ni-Si合金组织性能的影响. 《材料热处理学报》.
104. 朱莹莹，国秀花，李韶林，宋克兴，王强松，孙文明（2024）. Mn含量对铸态Cu-Ni-Cr合金组织和性能的影响. 《材料热处理学报》.
105. 贾明灿，皇涛，宋克兴，国秀花，冯江，宋海通（2024）. 消弧装置CuW电极微观侵蚀仿真与实验. 《材料热处理学报》.
106. 欧阳豫鲁，张国赏，柳亚辉，朱倩倩，宋克兴，皇涛，张彦敏，刘栋（2024）. 热浸镀锡电子铜带材回流焊过程中镀锡层的微观结构及缺陷分析. 《材料热处理学报》.
107. 梁十军，刘海涛，张彦敏，宋克兴，郭慧稳，郭引刚（2024）. 微合金化元素对纯铜热稳定性和导电性的影响. 《材料热处理学报》.
108. 杨文豪，周延军，宋克兴，杨冉，杨少丹，郁炎，陈纪东，周菲，江浩，刘东东，姜凯旋，黄宽（2024）. 制备工艺对Cu-15Ni-8Sn合金晶粒特征和力学性能的影响. 《材料热处理学报》.
109. 郭翡翔，杨斌，凌羽，宋克兴，卢伟伟，安茂忠，戎万，孙梁（2024）. 铜-锌合金电沉积及脱合金化法制备多孔铜箔. 《电镀与涂饰》.
110. 张学宾，谷继华，封存利，鲁龙龙，张彦敏，宋克兴，皇涛（2024）. Cu-4Ag合金微细丝拉拔极限预测模型. 《塑性工程学报》.
111. 肖振朋，李韶林，贾淑果，国秀花，王旭，刘嵩，宋克兴（2024）. 基于摩擦-温度双修正的Al2O3/Cu烧结坯热变形行为. 《特种铸造及有色合金》.
112. Fei Zhou, Yan-Jun Zhou, Ran Yang, Kexing Song, Longlong Lu, Yan-Min Zhang, Shao-Dan Yang, Peng-Fei Yue, Xiaopeng Meng, Ji-dong Chen, Wen-hao Yang (2024). Mn-Induced Microstructural Stabilization and Mechanical Strengthening in Cu-Ni-Sn Alloys: A Mechanistic Exploration. Materials Science & Engineering: A.DOI
113. Yan-Min Zhang, Yaopeng Yang, Yaoli Wang, Zao-Li Zhang, Jiang Feng, Chao-Min Zhang, Kexing Song (2024). Study of the Stress Relaxation Resistance and Microstructural Evolution of a Cu-Ni-Si Alloy Strip. Journal of Materials Research and Technology.DOI
114. Yunqi Shan, Yan-Min Zhang, Chao-Min Zhang, Jiang Feng, Baohuan Huang, Shiheng Zhao, Kexing Song (2024). Study on the microstructure and mechanism of stress relaxation behavior of Cu-Ni-Si alloy by two-stage rolling deformation. Materials Science & Engineering: A.DOI
115. Shao-Dan Yang, Yan-Jun Zhou, Chao-Min Zhang, Kexing Song, Ran Yang, Shihao Feng, Juan Du, Shuguang Cao, Lili Xiao, Fei Zhou, Wen-hao Yang, Guoshang Zhang (2024). Interaction mechanism of elements and second phase characteristics in as-cast Cu–15Ni–8Sn–(1Al–0.1Y) alloy. Materials Science and Technology.DOI
116. Jiang Feng, Yan-Min Zhang, Yan-Jun Zhou, Shiheng Zhao, Yunqi Shan, Yaopeng Yang, Kexing Song (2024). The influences of Cr and Mn on the strength, electrical conductivity, and stress relaxation properties of Cu-Ni-Si-Co-Mg alloys. Materials Today Communications.DOI
117. Zhichao Wang, Chao-Min Zhang, Shao-Lin Li, Kexing Song, Yan-Jun Zhou, Ya-Hui Liu, Jun Sun, Jun Cao (2024). Refinement of eutectic structure and precipitates of Cu-20Ag alloy due to Y microalloying. Journal of Materials Research and Technology.DOI
118. Xu Wang, Kexing Song, Jiang Feng, Jiandong Xing, T. Hang, Yiming Zhang (2024). Ablation resistance and current-carrying friction performance of WMoCu alloy with different Mo contents. Tribology International.DOI
119. Fei Zhou, Yan-Jun Zhou, Kexing Song, Ran Yang, Yan-min Zhang, Longlong Lu, Shao-Dan Yang, Yan Yu, Xiaopeng Meng, Ji-dong Chen, Wen-hao Yang (2024). Mechanism of the synergistic effect of solid solution strengthening and fine grain strengthening in an as-cast Cu–9Ni–6Sn alloy induced by Mn. Materials Science & Engineering: A.DOI
120. Yan-Jun Zhou, Jing-Zhao Yang, Ya-Hui Liu, Shao-Dan Yang, Xinxiang Zheng, Xiao-Lan Peng, Kexing Song (2024). Ultrasonic vibration aging induces dislocation configuration evolution to achieve coordinated control of high strength and low residual stress of C70350 alloy strip. Materials Science & Engineering: A.DOI
121. Wen-hao Yang, Yan-Jun Zhou, Ran Yang, Shao-Dan Yang, Fei Zhou, Kexing Song, Jiang Feng, Hao Jiang, Xue-Bin Zhang, Juan Du (2024). Effect mechanism of Nb addition on grain refinement and inhibition of discontinuous precipitation of Cu-15Ni-8Sn alloy. Journal of Materials Research and Technology.DOI
122. Xueqin Dai, Shuguo Jia, Yan-Jun Zhou, Ying-Xuan Ma, Zhen-Peng Xiao, Hui-Wen Guo, Xiaoping Cao, Yu Fu, Kexing Song, Zong-Ye Ding (2024). Microstructural evolution and properties of the Cu-Cr-Ti alloys after cold deformation and subsequent aging treatment. Progress in Natural Science: Materials International.DOI
123. Zihao Zhang, Haitao Liu, Y. Hua, Baofeng Zhang, Guojie Wang, Zhenguo Hou, Wei-Qiang Li, Kexing Song (2024). Effect of trace grain boundary segregation element bismuth on stress relaxation behavior of copper. Materials Science & Engineering: A.DOI
124. Jun Cao, Junchao Zhang, Huiyi Tang, Xiaoyu Shen, Kexing Song, Yan-Jun Zhou, Chengqiang Cui (2024). Investigation on the Microstructure Evolution and Strengthening Behavior of Rolled Bonding Cu Strip. Journal of Science: Advanced Materials and Devices.DOI
125. Sujian Gao, Qiang-Song Wang, Hong Guo, Xinhua Liu, Li-Yan Dong, Gang-Hui Li, Jinchun Ren, Junru Gao, Kexing Song (2024). Simultaneously enhanced strength and ductility of Cu matrix composites by incorporating Al2O3 aerogel particles. Materials Science & Engineering: A.DOI
126. Li-Yan Dong, Qiang-Song Wang, Yuan Wu, Haofeng Xie, Sujian Gao, Jinchun Ren, Junru Gao, Lin-Shuo Dong, Kexing Song (2024). Preparation and research on the structure and properties of high damping Mn-Cu alloy. Vacuum.DOI
127. Yu-Zhe Wang, Haoyan Cheng, Bo Sun, Shuaiyu Ma, J. Guan, Zhong-Han Jiang, Kexing Song, Hao Hu (2024). Enhanced electrical and mechanical properties of graphene/copper composite through reduced graphene oxide-assisted coating. Journal of Materials Research and Technology.DOI
128. Peng Xu, Weiwei Lu, Kexing Song, Haoyan Cheng, Hao Hu, Qianqian Zhu, Haitao Liu, Xiangkui Yang (2024). Preparation of electrodeposited copper foils with ultrahigh tensile strength and elongation: A functionalized ionic liquid as the unique additive. Chemical Engineering Journal.DOI
129. Jiyuan Li, S.J. Li, Shaolin Li, Kexing Song, Yanjun Zhou, Fei Cao, Fei Cao, Hui Su (2024). Evolution of free-air balls characteristics of the palladium-coated copper wire affected by the palladium coating structure. Vacuum.DOI
130. Liantao Lu, Haitao Liu, Zhaodong Wang, Qiongqiong Lu, Yan‐Jun Zhou, Fei Zhou, Yanmin Zhang, Weiwei Lu, Bin Yang, Qianqian Zhu, Kexing Song (2024). Advances in electrolytic copper foils: fabrication, microstructure, and mechanical properties. Rare Metals.DOI
131. Weiqiang Li, Hai‐Tao Liu, Zhenguo Hou, Zihao Zhang, Jincan Dong, Mengna Wang, Huiwen Guo, Kexing Song (2024). Effect of trace silver on the conductivity and softening temperature of high conductivity and high heat resistance pure copper. Journal of Materials Research and Technology.DOI
132. Zhenguo Hou, Hai‐Tao Liu, Longlong Lu, Weiqiang Li, Zihao Zhang, Weiwei Lu, Qingling Feng, Bo Jia, Kexing Song (2024). Effect of rare earth yttrium and the deformation process on the thermal deformation behavior and microstructure of pure titanium for cathode rolls. Journal of Materials Research and Technology.DOI
133. Yunqi Shan, Chaomin Zhang, Yanmin Zhang, Feng Jiang, Shiheng Zhao, Baohuan Huang, Kexing Song, Yanjun Zhou (2024). Influence of different rolling passes and deformation amounts on the microstructure evolution and strengthening mechanism of Cu–Ni–Si alloy. Journal of Materials Research and Technology.DOI
134. Shaolin Li, Hui Su, Kexing Song, Yanjun Zhou, Jun Ci Cao, Lili Xiao, Fei Cao, Chenyang Ge, Jiyuan Li (2024). Oxidation resistance mechanism of copper wire regulated by nano-palladium coating. Applied Surface Science.DOI
135. Zihao Zhang, Haitao Liu, Yunxiao Hua, Baofeng Zhang, Zhenguo Hou, Weiqiang Li, Kexing Song (2024). Study on the effect of phosphorus on anti-softening performance of oxygen-free copper. Journal of Materials Research and Technology.DOI
136. Jingzhao Yang, Yu Song, Yanmin Zhang, Yanjun Zhou, Weimin Long, Tao Huang, Huiwen Guo, Kexing Song (2024). The influence of tensile stress on the strength and residual stress of C19400 alloy under ultrasonic vibration treatment. Journal of Alloys and Compounds.DOI
137. Tao Huang, Chaomin Zhang, Ying-Xuan Ma, Jia Shu-guo, Kexing Song, Yanjun Zhou, Xiuhua Guo, Zhen-Peng Xiao, Hui‐Wen Guo (2024). Enhanced strength of a high‐conductivity Cu‐Cr alloy by Sc addition. Rare Metals.DOI
138. Xu Wang, Kexing Song, Junbiao Duan, Jiang Feng, Tao Huang, Jiandong Xing (2024). Current-carrying tribological behavior and wear mechanism of CuW composites with different W content. Tribology International.DOI
139. Chen Chen, Chu Chun Cheng, Haitao Liu, Mengxin Wang, Jing Tian, Weiwei Lu, Xiaoheng Li, Shizhong An, Xiaowen Peng, Yankun Li, Yutao Cui, Kexing Song (2024). Effect of APMImBr ionic liquid on the migration of silver in copper electrorefining. Journal of Materials Research and Technology.DOI
140. Tao HUANG, Hanjiang Wu, Kexing Song, Yanmin Zhang, Yan-jun ZHOU, Shao-lin LI (2024). Effect of wire diameter compression ratio on drawing deformation of micro copper wire. Transactions of Nonferrous Metals Society of China.DOI
141. Mengzhi Jia, Tao Huang, Kexing Song, X. H. Guo, Jiarun Feng, Xu Wang, Huaitao Song (2024). Research on arc evolution law of arc extin‐ction device under high‐speed large current. Materialwissenschaft und Werkstofftechnik.DOI
142. Haitao Liu, Guojie Wang, Kexing Song, Yunxiao Hua, Yong Liu, Tao Huang (2024). Effect of Calefaction and Stress Relaxation on Grain Boundaries/Textures of Cu–Cr–Ni Alloy. Metals.DOI
143. Chen Chen, Chu Chun Cheng, Mengxin Wang, Haitao Liu, Xiaoheng Li, Kexing Song (2024). Impact of 5-Amino-1H Tetrazole on Reducing Silver in Copper Cathodes during Electrorefining with High Silver Content Anode Plates. Metals.DOI
144. Xiuhua Guo, Guoyang Xu, Shaolin Li, Kexing Song, Song Liu, Xu Wang, Quanshun Luo, Haitao Liu, Hao Song (2024). Enhanced plastic deformation ability of copper matrix composites through synergistic strengthening of nano-Al2O3 and Cr particles. Materials Science and Engineering A.DOI
145. Tao Huang, Binghui Xing, Kexing Song, Nan Xiang, Liujie Xu, Liang Huang, Junqing Guo, Xiubo Yang (2024). Dislocation motion induced by pulse current in Ti/Al bimetal composite observed by in-situ TEM. Materials Characterization.DOI
146. Haitao Liu, Longlong Lu, Yanmin Zhang, Fei Zhou, Kexing Song (2024). Comparative Study of the Mechanical Properties and Fracture Mechanism of Ti-5111 Alloys with Three Typical Microstructures. Metals.DOI
147. Qiuli Han, Shizhong An, Kexing Song, Haitao Liu, Yanjun Zhou, Tao Huang, Chu Chun Cheng, Yanmin Zhang (2024). Strategy for co-enhancement of corrosion resistance-strength of Cu-7Ni-3Al-1Fe-1Mn alloy: Rare earth Sm microalloying. Materials Today Communications.DOI
148. Yingying Zhu, S.J. Li, Xiuhua Guo, Kexing Song, Qiangsong Wang, Wenming Sun (2024). Achieving high strength and high elasticity of Cu–Ni–Cr–Mn alloy by synergistic effect of multi-scale precipitates. Materials Science and Engineering A.DOI
149. Guoyang Xu, Xiuhua Guo, Shaolin Li, Kexing Song, Hao Song, Hui Su (2024). Enhanced hot deformation property of Al2O3/Cu–Cr composite fabricated by internal oxidation. Materials Science and Engineering A.DOI
150. Jiang Kai-xuan, Yanjun Zhou, Ran Yang, Kexing Song, Liu Ya-Hui, Yanmin Zhang, Yang Shao-dan, Fei Zhou, Huang Kuan, Liu Dongdong, Yang Wen-Hao (2024). Effects of cold deformation and aging on the phase transformation and mechanical properties of a Cu-15Ni-8Sn alloy. Materials Characterization.DOI
151. Qianqian Zhu, Guohua Wu, Lingfei Cao, Yan Zou, Hui Song, Yahui Liu, Kexing Song, Malcolm J. Couper (2024). Precipitation evolution of Al-Zn-Mg-Cu-(Ag) alloys with a low Zn/Mg ratio. Journal of Material Science and Technology.DOI
152. Hanjiang Wu, Tao Huang, Kexing Song, Yanjun Zhou, Shaolin Li, Yanmin Zhang (2024). Effect of large deformation on microstructure and properties of copper alloy wire. Journal of Materials Research and Technology.DOI
153. Tao Huang, Yu-ning Jiang, Mu Qiao, Kexing Song, Fan Yang, Xuebin Zhang, Nan Xiang, Yanmin Zhang (2024). Influence of Key Material Parameters and Loading Path on Fatigue Failure Behaviors of Corrugated Tubes. JOM.DOI
154. Zhenpeng Xiao, S.J. Li, Kexing Song, Shuguo Jia, Xiuhua Guo, Song Liu (2024). Effect of Copper Powder Addition on Microscopic Deformation Behavior of Al2O3/Cu‐Dispersion‐Strengthened Copper‐Sintered Billet. Advanced Engineering Materials.DOI
155. S.J. Li, Wenming Sun, Kexing Song, Qiangsong Wang, Yingying Zhu (2024). Enhanced high-temperature mechanical properties of the Cu–1.16Ni–0.36Cr alloy owing to interactions between metastable precipitates and dislocations. Journal of Materials Research and Technology.DOI
156. Xu Wang, Kexing Song, Jiang Feng, Jiandong Xing, Tao Huang, Yiming Zhang (2024). Microstructure and mechanical properties of WMoCu alloy doped with different sized Mo particles. International Journal of Refractory Metals and Hard Materials.DOI
157. Xiuhua Guo, Kexing Song, Kaiyue Duan, Quanshun Luo, Kai Li, Xiaojun Miao (2024). Microstructure and arc erosion behavior of WC/CuCr30 composites based on nano-Cr precipitation. Vacuum.DOI
158. Hongxia Li, Bingbing Shang, Guoqiang Wang, Kexing Song, Baohong Tian, Fengzhang Ren (2024). Research on the technology of drying high moisture molybdenum concentrate powder with waste heat of roasting kiln. Journal of Physics Conference Series.DOI
159. Yanmin Zhang, Baohuan Huang, Hongjiao Gao, Shanguang Li, Fei Zhou, Kexing Song (2024). Effect of annealing time on bending performance and microstructure of C19400 alloy strip. Nanotechnology Reviews.DOI
160. 凌羽，张少强，卢伟伟，徐鹏，朱倩倩，胡浩，宋克兴，杨祥魁，朱义刚（2023）. 低轮廓电解铜箔制备工艺参数的优化. 《电镀与涂饰》.
161. 姜凯旋，周延军，宋克兴，杨冉，郁炎，柳亚辉，张彦敏，陈纪东，黄宽，刘东东，余勃（2023）. 固溶和时效对挤压态Cu-15Ni-8Sn合金组织和性能的影响. 《材料热处理学报》.
162. 杨耀鹏，张彦敏，王要利，刘爱奎，冯江，张朝民，宋克兴（2023）. 时效处理对Cu-Ni-Si合金应力松弛行为影响研究. 《特种铸造及有色合金》.
163. 杨豫博，国秀花，宋克兴，李韶林，米绪军，李周（2023）. CNTs添加对Cu-Al2O3复合材料耐电弧侵蚀性能的影响. 《复合材料学报》.
164. 曹晓，贾淑果，朱倩倩，宋克兴，刘海涛，柳亚辉，冯庆，贾波，沈楚（2023）. 旋压工业纯钛TA1的形变及退火行为. 《材料热处理学报》.
165. 徐国杨，国秀花，李韶林，宋克兴，刘嵩，肖振朋（2023）. 不同Al2O3含量的Al2O3/Cu复合材料的热变形行为. 《材料热处理学报》.
166. 谷继华，张学宾，周延军，宋克兴，李韶林，曹军，张朝民，张朋飞，李鑫，吴捍疆（2023）. 拉拔变形量对Cu-4 mass%Ag合金线材组织和性能的影响. 《材料热处理学报》.
167. 马映璇，贾淑果，张朝民，宋克兴，周延军，肖振朋，岳鹏飞，郭慧稳（2023）. 时效对冷轧态Cu-Cr-(Sc)合金组织和性能的影响. 《材料热处理学报》.
168. 肖振朋，李韶林，贾淑果，宋克兴，国秀花，王旭，刘嵩（2023）. 纯铜组元对Al2O3弥散强化铜变形性能的影响. 《材料热处理学报》.
169. 段俊彪，国秀花，皇涛，宋克兴，冯江，王旭（2023）. 基于SPS工艺制备的W-25 mass%Cu复合材料的组织与性能. 《材料热处理学报》.
170. 宁兆生，宋克兴，张彦敏，刘时兵，史昆，张志勇，刘田雨，尚尔峰（2023）. Ti系轻质难熔合金高温氧化性能的研究进展. 《材料导报》.
171. 张朋飞，周延军，柳亚辉，李韶林，宋克兴，曹军，吴保安，高岩，岳鹏飞（2023）. Cu-20%Ag合金冷拉拔变形过程导电特性研究. 《铜业工程》.
172. 赵志朋，胡浩，宋克兴，程浩艳，代明伟，郁宁宁，卢伟伟，冯庆，杨祥魁（2023）. PEG和MPS对电解铜箔结构和力学性能的影响. 《电镀与涂饰》.
173. 肖志涛，皇涛，邢兵辉，陈拂晓，宋克兴，郭俊卿，张彦敏（2023）. 电流辅助成形中位错演化行为研究进展. 《塑性工程学报》.
174. 皇保欢，张彦敏，李吉宝，杨耀鹏，黄宽，单运启，赵世恒，张鸿飞，冯江，张朝民，宋克兴（2023）. 基于热压缩试验的Cu-0.98Ni-0.24P合金本构方程及热加工图研究. 《特种铸造及有色合金》.DOI
175. Dong-Dong Liu, Yan-Jun Zhou, Ran Yang, Juan Su, Kexing Song, Shao-dan Yang, Xue-Bin Zhang, Fei Zhou, Guoshang Zhang, Kai-xuan Jiang, Kuan Huang, Wen-hao Yang (2023). Effect of electromagnetic stirring current on the mechanical properties of Cu-15Ni-8Sn alloy and its mechanism of inducing dendrite refinement and Sn distribution homogenization. Materials Today Communications.DOI
176. Kai-xuan Jiang, Yan-Jun Zhou, Ran Yang, Kexing Song, Ya-hui Liu, Yan-min Zhang, Shao-dan Yang, Fei Zhou, Kuan Huang, Dong-Dong Liu, Wen-hao Yang (2023). Nanophase transformation and strengthening - toughening mechanism of the Cu-15Ni-8Sn alloy during aging. Journal of Materials Research and Technology.DOI
177. Fei Zhou, Yan-Jun Zhou, Kexing Song, Yan-Min Zhang, Ran Yang, Shao-Dan Yang, Longlong Lu, Yan Yu, Lele Liu, Ji-dong Chen, Kai-xuan Jiang, Wen-hao Yang (2023). The influence of microalloying and preparation process on phase transformation, mechanical properties, and friction/corrosion behavior of Cu–Ni–Sn alloys: A review. Journal of Materials Research and Technology.DOI
178. Hanjiang Wu, Tao Huang, Kexing Song, Shaolin Li, Yanjun Zhou, Yanmin Zhang (2023). Effect of drawing speed on the deformation characteristics, microstructure and properties of copper wire rod. Materials Science and Engineering A.DOI
179. Chenyang Ge, Shaolin Li, Kexing Song, Xiuhua Guo, Yanjun Zhou, Haitao Liu, Chaomin Zhang, Jun Ci Cao, Fei Cao, Yan Gao, Hui Su (2023). Interaction of Y and impurity P on the synergistic enhancement of elongation and electrical conductivity of single crystal copper rod. Materials & Design.DOI
180. Xu Wang, Junbiao Duan, Kexing Song, Jiandong Xing, Jiang Feng (2023). Microstructure, mechanical properties and arc erosion behavior of CuW composites prepared by high energy ball milling and spark plasma sintering. International Journal of Refractory Metals and Hard Materials.DOI
181. Yunxiao Hua, Kexing Song, Haitao Liu, Xiaowen Peng, Jiangwei Wang, Huiwen Guo, Liye Niu, Aikui Liu (2023). Trace cerium/ yttrium addition for inhibiting sulfur-induced intermediate temperature embrittlement in ultrahigh-purity copper. Materials Characterization.DOI
182. Hui Su, Shaolin Li, Kexing Song, Yanjun Zhou, Jun Ci Cao, Fei Cao, Yan Gao, Chenyang Ge, Jiyuan Li (2023). Diffusion and reaction behavior of palladium coating and copper matrix prepared using a halogen-free direct coating process. Surface and Coatings Technology.DOI
183. Wenming Sun, Shaolin Li, Kexing Song, Qiangsong Wang, Yingying Zhu (2023). Effects of Cold Rolling Reduction Rate on the Microstructure and Properties of Cu-1.16Ni-0.36Cr Alloy after Thermo-Mechanical Treatment. Materials.DOI
184. Junbiao Duan, Xiuhua Guo, Jiang Feng, Xu Wang, Keke Qi, Hao Song, Kexing Song (2023). Study on the arc erosion resistance and mechanism of Cr- doped WCu composites. Materials Characterization.DOI
185. Shaodan Yang, Kexing Song, Yanjun Zhou, Ran Yang, Yan Yu, Lele Liu, Jidong Chen, Fei Zhou, Wenhao Yang, Guoshang Zhang, Juan Du (2023). Research Progress on Cu–15Ni–8Sn Alloys: The Effect of Microalloying and Heat Treatment on Microstructure and Properties. Materials.DOI
186. Yiming Zhu, Guoteng Xu, Jun Zhang, Binglong Mao, Xuefeng Wei, Kexing Song (2023). Porous silica supported Ag core-Pd shell composite: Seed-mediated stepwise reduction and tunable dispersion for boosting catalytic hydrogen evolution. Fuel.DOI
187. Kangrong Weng, Yang Wang, Song Yang, Yuheng Fan, Hongliang Zhao, Zhenyu Hong, Kexing Song, Xianglei Dong, Chunwen Guo (2023). Optimizing strength and electrical conductivity of Cu–Fe–Ti alloy by pre-aging treatment. Journal of Materials Research and Technology.DOI
188. Chaofan Jia, Shaolin Li, Xiuhua Guo, SU Juan-hua, Kexing Song (2023). Influence of service parameters on the current-carrying tribological properties of CF-Al2O3/Cu composites. Industrial Lubrication and Tribology.DOI
189. Jin-tao Song, Yu-Duo Fu, Kexing Song, Qianqian Zhu, Xiaowen Peng, Yunxiao Hua, Yanjun Zhou, Xiuhua Guo, Shizhong An, Ying-Xuan Ma (2023). Effect of interaction between P and Ce on properties of copper. Materials Science and Technology.DOI
190. Shaolin Li, Chaofan Jia, Xiuhua Guo, Kexing Song, Xu Wang, Hao Guo, SU Juan-hua (2023). Enhancement mechanism of carbon fiber on the current-carrying tribological properties of Cf-Al2O3/Cu composites. Wear.DOI
191. Hongjiao Gao, Yanmin Zhang, Kexing Song, Yanjun Zhou, Fei Zhou, Aikui Liu (2023). Effect of Low-Temperature Annealing on the Bending Properties of C19400 Copper Alloy Strips. Journal of Materials Engineering and Performance.DOI
192. Tao Huang, Binghui Xing, Kexing Song, Liujie Xu, Siliang Yan, Nan Xiang, Junqing Guo, Xuebin Zhang, Liang Huang (2023). Thermal and non-thermal effects of Cu/Al laminated composite during electrically assisted tension. Materials Science and Engineering A.DOI
193. Yu Song, Jingzhao Yang, Kexing Song, Yanjun Zhou, Tao Huang, Chunwei Zhang, Tie Li, Weidong Fan (2023). Effect of tensile stress annealing on residual stress and strength of C19400 alloy. Journal of Materials Research and Technology.DOI
194. Yahui Liu, Yanjun Zhou, Changjian Lu, K. K. Gan, Yibo Du, Aikui Liu, Fanjian Meng, Guowei Liu, Yuzhe Gong, Kexing Song, Shaodan Yang (2023). Nano-precipitates evolution and properties improvement mechanism of Cu–Zn–Ni–Si-X alloy strip based on multi-element microalloying and thermomechanical treatment. Journal of Materials Research and Technology.DOI
195. Yiming Zhu, Guoteng Xu, Jun Zhang, Xiang Li, Xuefeng Wei, Kexing Song (2023). Nearly monodisperse Cu|pd alloyed Nanocrystals: Ultrasound induced stepwise thermoreduction in organic Medium, and catalytic alcoholysis for hydrogen evolution. Fuel.DOI
196. Jingzhao Yang, Kun Bu, Yanjun Zhou, Kexing Song, Tao Huang, Xiaowen Peng, Haitao Liu, Yibo Du (2023). Microstructure, residual stress, and mechanical properties evolution of a Cu–Fe–P alloy under different conditions. Journal of Materials Research and Technology.DOI
197. Xin Li, Yanjun Zhou, Yahui Liu, Shaolin Li, Kexing Song, Cunli Feng, Baoan Wu, Pengfei Zhang, Hanjiang Wu, Jihua Gu, Siyu He, Yan Gao (2023). Texture evolution and its influence mechanism on properties of single crystal copper and polycrystalline copper during cumulative deformation. Journal of Materials Research and Technology.DOI
198. Kaiyue Duan, Xiuhua Guo, Kexing Song, Xu Wang, Jiang Feng, Shaolin Li, Jianying Zhong, Kai Li (2023). Arc erosion resistance of WC/CuCr30 composites based on changing of Cr particle morphology and orientation. Journal of Materials Research and Technology.DOI
199. Ying Zhang, Xiuhua Guo, Kexing Song, Shaolin Li, Jiang Feng, Kaiyue Duan, Junbiao Duan (2023). Enhanced interfacial bonding and mechanical properties of (TiCp+GNPs)/Cu composites by Ti-induced GNPs/Cu interfacial modification. Journal of Alloys and Compounds.DOI
200. Yang Wang, Yang Song, Yuheng Fan, Hongliang Zhao, Zhenyu Hong, Kexing Song, Xianglei Dong, Chunwen Guo (2023). Double-peak precipitation hardening in the Cu-Fe-Ti alloy. Scripta Materialia.DOI
201. Y.X. Hua, Kexing Song, H.T. Liu, J.W. Wang, C.M. Zhang, Yanjun Zhou, B. Pang, Jiepeng Song, Jialong He, Hongmin Zhao (2023). Role of grain boundary character on Bi segregation-induced embrittlement in ultrahigh-purity copper. Journal of Material Science and Technology.DOI
202. Yibo Du, Yanjun Zhou, Kexing Song, Tao Huang, David Hui, Jingzhao Yang (2023). Influence of trace silicon addition on the strengthening precipitates, mechanical properties and stress relaxation resistance of Cu-Cr alloy. Journal of Alloys and Compounds.DOI
203. Chaomin Zhang, Yong Jiang, Yanjun Zhou, Xiuhua Guo, Kexing Song (2023). First-principles insights into micro-alloying roles of Zr in Cu–Cr–Zr alloys. Journal of Materials Research and Technology.DOI
204. Tao Huang, Yanbo Pei, Fuxiao Chen, Kun Wang, Junqing Guo, Binghui Xing, Nan Xiang, Kexing Song (2023). A novel layered finite element model for predicting the damage behavior of metal laminated composite. Composite Structures.DOI
205. Xiuhua Guo, Kaiyue Duan, Xu Wang, Kexing Song, Xiangfeng Zhang, Kai Li (2023). Thermal and arc erosion behavior of CuCr contact material based on large plastic deformation treatment. Journal of Materials Research and Technology.DOI
206. Jingzhao Yang, Kun Bu, Yanjun Zhou, Kexing Song, Yu Song, Tao Huang, Xiaowen Peng, Haitao Liu, Yibo Du (2023). Influence of short-time annealing on the evolution of the microstructure, mechanical properties and residual stress of the C19400 alloy strips. Journal of Alloys and Compounds.DOI
207. Hanjiang Wu, Tao Huang, Kexing Song, Yanmin Zhang, Yanjun Zhou, Shaolin Li, Xin Li (2023). Study on deformation characteristics of multi-pass continuous drawing of micro copper wire based on crystal plasticity finite element method. Nanotechnology Reviews.DOI
208. 代明伟，胡浩，宋克兴，程浩艳，卢伟伟，张彦敏，徐静，冯庆，杨祥魁（2022）. 氯离子质量浓度及电场强度对电解铜箔性能的影响. 《河南科技大学学报(自然科学版)》.
209. 吴捍疆，宋克兴，张彦敏，封存利，周延军，吴保安，陈鼎彪（2022）. 热型连铸固液界面影响效应的研究进展. 《热加工工艺》.
210. 段凯月，国秀花，宋克兴，钟建英，李凯，王旭，冯江，段俊彪，张颖（2022）. WC/CuCr30复合材料的组织性能及耐电弧侵蚀行为. 《材料热处理学报》.
211. 周菲，张彦敏，宋克兴，高红姣（2022）. 不同变形量对Cu-2Ag合金组织和性能的影响. 《锻压技术》.
212. 冯庆，王快社，闫爱玲，郝小军，贾波，柴作强，宋克兴（2022）. 酸刻蚀处理对IrO2-Ta2O5/Ti阳极寿命的影响（英文）. 《稀有金属材料与工程》.
213. 李鑫，周延军，宋克兴，封存利，吴捍疆，张朋飞，谷继华（2022）. 冷拉拔变形对热型水平连铸单晶铜组织性能的影响. 《材料热处理学报》.
214. 张颖，国秀花，宋克兴，李韶林，冯江，杨豫博，段凯月，段俊彪（2022）. 球磨工艺对新型（TiCp+GNPs）/Cu复合材料组织和性能的影响. 《材料热处理学报》.
215. 林焕然，国秀花，宋克兴，苏娟华，李韶林，冯江（2022）. (WC+SiCw)/Cu-Al2O3复合材料载流摩擦磨损行为. 《表面技术》.
216. 周延军，王启峰，佘京鹏，宋克兴，刘海涛，黄景明，李韶林（2022）. 冷变形对铸轧辊用Cu-Be-Co合金组织性能的影响. 《特种铸造及有色合金》.DOI
217. 杜宜博，周延军，宋克兴，郭慧稳，刘爱奎（2022）. Cu-Cr-Si合金时效强化机理及析出动力学研究. 《河南科技大学学报(自然科学版)》.
218. 代雪琴，贾淑果，范俊玲，宋克兴，周延军，马映璇，肖振朋，牛立业，郭慧稳（2022）. 时效对Cu-0.2Cr-0.08Ti合金组织及性能的影响. 《材料热处理学报》.
219. 冯庆，王快社，薛建超，贾波，郝小军，宋克兴（2022）. Mn掺杂提高IrO2-Ta2O5电极在硫酸溶液中析氧的电催化活性（英文）. 《稀有金属材料与工程》.
220. 宋宇，杨婧钊，周延军，宋克兴，皇涛，彭晓文，郭慧稳，刘爱奎（2022）. 不同处理状态下C19400铜合金组织、织构和性能演变. 《特种铸造及有色合金》.
221. 张朋飞，周延军，宋克兴，曹军，吴保安，陈鼎彪，李鑫，吴捍疆，谷继华（2022）. 冷拉拔变形量对Cu-20 mass%Ag合金线材组织性能的影响. 《材料热处理学报》.
222. 谷继华，张学宾，张彦敏，宋克兴，曹军，周延军，曹飞（2022）. 微细丝生产用Cu-4Ag合金高应变速率下的动态力学行为. 《塑性工程学报》.
223. 贾超凡，苏娟华，李韶林，国秀花，宋克兴，冯孟奇，米绪军，李周（2022）. 服役参数对Cf-Al2O3/Cu复合材料摩擦磨损性能的影响. 《材料热处理学报》.
224. 李闪光，张彦敏，宋克兴，周菲，鲁龙龙，刘爱奎（2022）. 退火温度对C19400合金组织性能和残余应力的影响. 《材料热处理学报》.
225. 蒋宇宁，皇涛，陈拂晓，相楠，赵家鑫，宋克兴，郝留成，高梦繁（2022）. 基于非对称循环加载位移的波纹管疲劳寿命. 《塑性工程学报》.
226. 吴捍疆，宋克兴，张彦敏，周延军，曹军，丁雨田，吕长春，胡勇（2022）. Cu-20Ag合金线材多道次连续拉拔成形及组织演变. 《塑性工程学报》.
227. 宁兆生，宋克兴，张彦敏，赵军，郑松翔，陈彪，于志强，杨晓曦，王彦鹏（2022）. 高精度钛合金叶轮熔模精密铸造工艺优化. 《铸造》.
228. 何思雨，周延军，林乙丑，杨婧钊，吕官丽，杜宜博，宋克兴（2022）. 超声振幅对C70350合金带材残余应力和微观组织的影响. 《材料热处理学报》.
229. 杜宜博，周延军，宋克兴，牛立业，郭慧稳（2022）. Si对Cu-0.21 mass%Cr合金富Cr析出相和性能的影响. 《材料热处理学报》.
230. Junbiao Duan, Xiuhua Guo, Tao Huang, Kexing Song, Jiang Feng, Xu Wang, Jianying Zhong, Kaiyue Duan, Ying Zhang (2022). Arc ablation resistance behavior of Cu-W alloys with different W contents under atmospheric environment. Materials Today Communications.DOI
231. Binglong Mao, Yiming Zhu, Dihua Huang, Jun Zhang, Quan‐Xing Liu, Xiang Li, Kexing Song (2022). Stepwise Reduction and In Situ Loading of Core‐Shelled Pt@Cu Nanocrystals on TiO2–NTs for Highly Active Hydrogen Evolution. Advanced Materials Interfaces.DOI
232. Dihua Huang, Yiming Zhu, Binglong Mao, Jun Zhang, Quan‐Xing Liu, Xiang Li, Kexing Song (2022). Galvani substitution modulated self-assembly of Cu@Pt nanowires with hierarchical microstructure for highly active hydrogen evolution. International Journal of Hydrogen Energy.DOI
233. Kaiyue Duan, Xiuhua Guo, Kexing Song, Xu Wang, Jiang Feng, Shaolin Li, Jianying Zhong, Kai Li (2022). Influence of WC particles addition on material transfer behavior of CuCr30 contact material. Materials Today Communications.DOI
234. Yanjun Zhou, Yibo Du, Xiaowen Peng, Kexing Song, Shaodan Yang, Jingzhao Yang, Qianqian Zhu, Yahui Liu, Chaomin Zhang, Siyu He (2022). The evolution of Cr-rich precipitates in Cu-0.25Cr-0.03Ti alloy induced by trace Ti element. Journal of Materials Research and Technology.DOI
235. Yanjun Zhou, Jingzhao Yang, Kexing Song, Shaodan Yang, Qianqian Zhu, Xiaowen Peng, Yahui Liu, Yibo Du, Siyu He (2022). Effect of annealing temperature on dual-structure coexisting precipitates in Cu–2.18Fe–0.03P alloy and softening mechanism at high temperature. Journal of Materials Science.DOI
236. Xin Li, Yanjun Zhou, Yahui Liu, Shaolin Li, Kexing Song, Cunli Feng, Baoan Wu, Pengfei Zhang, Hanjiang Wu, Jihua Gu, Siyu He, Yan Gao (2022). Microstructure evolution of high-strength and ultra-high-conductivity microfilament wire prepared by continuous deformation of single-crystal copper. Journal of Materials Science.DOI
237. Yanjun Zhou, Yahui Liu, Kexing Song, Shaolin Li, Cunli Feng, Qianqian Zhu, Xiaowen Peng, Shaodan Yang, Xin Li, Pengfei Zhang (2022). Mechanisms for high strength and ultra-high electrical conductivity of Cu-3.5wt.%Ag alloy prepared by thermomechanical treatment. Materials Today Communications.DOI
238. Yunxiao Hua, Haitao Liu, Kexing Song, Jiangwei Wang, Yin'gang Guo, Jing Jin Tian, Huiwen Guo (2022). Effect of cerium on microstructure, texture and properties of ultrahigh-purity copper. Journal of Rare Earths.DOI
239. Bo Sun, Mingwei Dai, Songchi Cai, Haoyan Cheng, Kexing Song, Ying Yu, Hao Hu (2022). Challenges and strategies towards copper-based catalysts for enhanced electrochemical CO2 reduction to multi-carbon products. Fuel.DOI
240. Yunxiao Hua, Haitao Liu, Kexing Song, Xiaowen Peng, Chaomin Zhang, Yanjun Zhou, Tao Huang, Xiuhua Guo, Xujun Mi, Qiangsong Wang (2022). Trace Ce addition for inhibiting Bi segregation induced embrittlement in ultrahigh-purity copper. Materials Characterization.DOI
241. Binghui Xing, Tao Huang, Kexing Song, Liu-jie Xu, Nan Xiang, Xuewen Chen, Fuxiao Chen (2022). Effect of electric current on formability and microstructure evolution of Cu/Al laminated composite. Journal of Materials Research and Technology.DOI
242. Pengfei Zhang, Yanjun Zhou, Yahui Liu, Shaolin Li, Kexing Song, Jun Ci Cao, Baoan Wu, Xin Li, Hanjiang Wu, Jihua Gu, Siyu He, Yan Gao (2022). Strengthening mechanism of ultra-high strength Cu–20Ag alloy wire induced by cumulative strain. Materials Science and Engineering A.DOI
243. Yanmin Zhang, Shanguang Li, Kexing Song, Yanjun Zhou, Fei Zhou, Longlong Lu, Aikui Liu (2022). Effect of Stretch-Bending Straightening on the Residual Stress of C19400 Alloy Strips. Journal of Materials Engineering and Performance.DOI
244. Fei Cao, Ruosi Wang, Peng Zhang, Tongmin Wang, Kexing Song (2022). In Situ Investigation of Microstructural Evolution and Intermetallic Compounds Formation at Liquid Al/Solid Cu Interface by Synchrotron X-ray Radiography. Materials.DOI
245. Jiang Feng, Kexing Song, Shuhua Liang, Xiuhua Guo, Shaolin Li (2022). Mechanical properties and electrical conductivity of oriented-SiC-whisker-reinforced Al2O3/Cu composites. Journal of Materials Research and Technology.DOI
246. Chaofan Jia, Shaolin Li, Xiuhua Guo, Xu Wang, SU Juan-hua, Kexing Song (2022). Arc erosion resistance mechanism of Cf–Al2O3/Cu composites modified by carbon fibers. Journal of Materials Research and Technology.DOI
247. Haoyan Cheng, Wanting Xia, Zhipeng Zhao, Wenjing Wang, Kexing Song, Haitao Li, Chu Chun Cheng, Hao Hu (2022). Tailoring core@shell structure of Cu2−xSe@PDAs for synergistic solar-driven water evaporation. Journal of Materials Science.DOI
248. Jin-tao Song, Haitao Liu, Kexing Song, Yunxiao Hua, Xiaowen Peng, Yanjun Zhou, Xiuhua Guo, Chu Chun Cheng, Ling-Liang Zhang, Guojie Wang, An-fu Tian (2022). The interactions of Ce-P on microstructure and mechanical properties in pure copper. Materials Science and Technology.DOI
249. Yunxiao Hua, Haitao Liu, Kexing Song, Jiangwei Wang, Yanjun Zhou, Tao Huang, Shaolin Li, Xiaowen Peng, Qianqian Zhu (2022). Trace sulfur-induced embrittlement of ultrahigh-purity copper. Materials Science and Engineering A.DOI
250. Qi Fang Zhu, Qishan Huang, Yanzhong Tian, Shuchun Zhao, Yingbin Chen, Guang Cao, Kexing Song, Yanjun Zhou, Wei Yang, Ze Zhang, Xianghai An, Haofei Zhou, Jiangwei Wang (2022). Hierarchical twinning governed by defective twin boundary in metallic materials. Science Advances.DOI
251. Chu Chun Cheng, Ziwei Song, Kexing Song, Ling‐Feng Wang, Tao Huang, Yanjun Zhou, Haitao Liu, Shaolin Li, Chao Han, Zhihe Dou, Ting‐an Zhang (2022). In-Situ Synthesis and Characterizations of a Novel Aluminum Bronze Composite Reinforced with Micro-Size Tungsten Particles. JOM.DOI
252. Yubo Yang, Xiuhua Guo, Kexing Song, Fei Xiang Long, Xu Wang, Shaolin Li, Zhouhang Li (2022). Electrical wear performance of copper matrix composites reinforced with hybrid CNTs and TiB 2 particles. Industrial Lubrication and Tribology.DOI
253. Yiming Zhu, Binglong Mao, Jun Zhang, Quan‐Xing Liu, Xiang Li, Kexing Song (2022). Pt|Cu Bimetallic Stratiform Nanocrystal Cluster Hierarchical Frameworks: Robust Catalyst for Hydrolyzing Ammonia Borane to Generate Hydrogen. Advanced Materials Interfaces.DOI
254. Fei Zhou, Yanmin Zhang, Longlong Lu, Kexing Song, Hongjiao Gao (2022). Effects of a thermal-ultrasonic stress relaxation process on the residual stress, mechanical properties and microstructures of C19400 copper alloy strips. Materials Science and Engineering A.DOI
255. Chu Chun Cheng, Kexing Song, Ziwei Song, Ling‐Feng Wang, Qianqian Xu, Ling-Liang Zhang, Chao Han, Zhihe Dou, Ting‐an Zhang (2022). Synthesis of As-Cast WCu Composite Containing Micro- and Nano-Size Tungsten Particles Using Aluminothermic Reduction. JOM.DOI
256. 胡浩，宋克兴，卢伟伟，程浩艳，周延军，曹军，陈鼎彪，沈晓宇，丁勇，徐静，胡天庆（2021）. 铜基材料表面石墨烯涂层的调控. 《河南科技大学学报(自然科学版)》.DOI
257. 宋克兴（2021）. 铜中微量杂质元素影响及高性能铜基微细丝制造技术研究进展. 《2021年中国铜加工产业年度大会暨中国(三门峡)铜产业高质量发展大会文集》.DOI
258. 袁鹏飞，苏娟华，宋克兴，皇涛，张学宾，曹军，陈鼎，沈晓宇（2021）. 关键参数对铜银合金丝线材拉拔力的影响. 《河南科技大学学报(自然科学版)》.DOI
259. 王要利，宋克兴，张彦敏，韩文奎，张帅帅（2021）. 微量钛对4Cr5MoSiV1合金钢组织性能的影响. 《材料热处理学报》.
260. 吕官丽，苏娟华，周延军，宋克兴，牛立业，郭慧稳，张朝民，彭晓文，皇涛，杜宜博（2021）. 退火温度对Cu-Fe-P合金性能和第二相特征的影响. 《材料热处理学报》.
261. 崔大田，钟素娟，宋克兴，耿进锋，王星星，龙伟民（2021）. 快速凝固三元共晶Au-19.25Ag-12.80Ge钎料合金的形核动力学（英文）. 《稀有金属材料与工程》.
262. 周延军，陈伟，李立鸿，孔令宝，宋克兴，刘海涛，国秀花（2021）. 时效工艺对铸轧辊铍铜合金力学性能和显微组织影响. 《特种铸造及有色合金》.DOI
263. 张学宾，谷继华，宋克兴，米绪军，吴保安，肖柱，解浩峰，吕长春（2021）. 尺寸效应下Cu-Ag合金强度的神经网络预测. 《河南科技大学学报(自然科学版)》.DOI
264. 宋克兴，丁雨田，吴保安，胡勇，陈鼎彪，卢伟伟，胡浩，周延军（2021）. 含Pd涂镀液润湿性能的调控及对镀层均匀性的影响. 《功能材料》.
265. 鲁龙龙，张彦敏，权思佳，李闪光，李炎，吴宇坤，宋克兴（2021）. 双态组织Ti80合金的动态再结晶行为. 《稀有金属材料与工程》.
266. 李周，宋克兴（2021）. “铜及铜合金专题”内容简介. 《中国有色金属学报》.
267. 林乙丑，张彦敏，张广威，郎庆斌，宋克兴（2021）. 1.25Cr0.5MoSiNb钢过冷奥氏体连续冷却转变. 《材料热处理学报》.DOI
268. 宋金涛，刘海涛，宋克兴，安士忠，程楚，华云筱，周延军，张凌亮，王国杰，田安福，杨璐瑶（2021）. 稀土铈与磷相互作用对纯铜晶粒尺寸和导电性能的影响. 《材料导报》.
269. 李韶林，国秀花，宋克兴，冯孟奇，王旭（2021）. 载流摩擦用铜基复合材料的研究现状及展望. 《材料热处理学报》.DOI
270. 代雪琴，贾淑果，范俊玲，宋克兴，周延军，马映璇，肖振朋，牛立业，郭慧稳（2021）. 高强高导铜合金的强化机理与研究热点. 《材料热处理学报》.DOI
271. 冯孟奇，李韶林，贾淑果，宋克兴，国秀花，林焕然，张祥峰（2021）. 纤维涂层对Cf-Al2O3/Cu复合材料微观组织和性能的影响. 《材料热处理学报》.DOI
272. 李闪光，张彦敏，范俊玲，宋克兴，牛立业，郭慧稳，鲁龙龙，周菲，高红姣（2021）. 短时低温退火对Cu-2.1Fe-0.03P合金板材组织和性能的影响. 《材料热处理学报》.DOI
273. 韩文奎，张彦敏，王要利，葛学元，宋克兴（2021）. Q-P-T工艺中C配分对4Cr5MoSiV1Ti钢力学性能的影响. 《材料热处理学报》.DOI
274. 张凌亮，程楚，宋克兴，刘海涛，周延军，安士忠，宋金涛，华云筱（2021）. 硼脱氧后的残留硼含量对纯铜组织及性能的影响. 《材料热处理学报》.DOI
275. 朱学峰，肖柱，宋克兴，盛晓菲，戴杰，蒋洪赟，周少强（2021）. 下引连铸Cu-Ag合金拉拔过程中组织与性能演变. 《中国有色金属学报》.
276. Jin-tao Song, Haitao Liu, Kexing Song, Yunxiao Hua, Xiaowen Peng, Shizhong An, Chu Chun Cheng, Yanjun Zhou, Xiuhua Guo, Yu-bo Qiao, Guojie Wang, Luyao Yang (2021). Effects of CeCu6 and Cu2S on microstructure and properties in pure copper. Journal of Materials Research and Technology.DOI
277. Fei Xiang Long, Xiuhua Guo, Kexing Song, Jiaqi Liu, Xu Wang, Yubo Yang, Shaolin Li (2021). An internal-oxidation-based strategy induced high-density alumina in-situ nanoprecipitation and carbon nanotube interface optimization for co-reinforcing copper matrix composites. Composites Part B Engineering.DOI
278. Yingbin Chen, Shuchun Zhao, Qishan Huang, Qi Fang Zhu, Kexing Song, Haofei Zhou, Jiangwei Wang (2021). A geometrical model for grain boundary migration mediated formation of multifold twins. International Journal of Plasticity.DOI
279. Huanran Lin, Xiuhua Guo, Kexing Song, Shaolin Li, Jang Feng, Xiangfeng Zhang, Mengqi Feng (2021). Synergistic strengthening effect of tungsten carbide (WC) particles and silicon carbide whiskers (SiCw) on mechanical properties of Cu–Al2O3 composite. Journal of Materials Research and Technology.DOI
280. Longlong Lu, Yanmin Zhang, Fei Zhou, Kexing Song, Shanguang Li (2021). Study on microstructure evolution of Ti–6Al–3Nb–2Zr–1Mo alloy with bimodal structure during hot compression in the near β region. Journal of Materials Research and Technology.DOI
281. Xinlv Peng, Liang Chen, Kexing Song (2021). Mechanism of texture formation in submicron Cu thin films. Journal of Materials Research and Technology.DOI
282. Jun Ci Cao, Junchao Zhang, Baoan Wu, Huiyi Tang, Changchun Lv, Kexing Song, Guannan Yang, Chengqiang Cui, Yangguang Gao (2021). Study on Manufacturing Technology of Ag-8.5Au-3.5Pd Fine Alloy Wire. Micromachines.DOI
283. Longlong Lu, Yanmin Zhang, Zaoli Zhang, Kexing Song, Shanguang Li, Yan Li, Fei Zhou, Qigao Cao, Qingling Feng, Binbin Zhang (2021). Investigation on microstructure and texture evolution of Ti–6Al–3Nb–2Zr–1Mo alloy during hot deformation. Materials Research Express.DOI
284. Yibo Du, Yanjun Zhou, Kexing Song, Tao Huang, David Hui, Haitao Liu, Chu Chun Cheng, Jingzhao Yang, Liye Niu, Huiwen Guo (2021). Zr-containing precipitate evolution and its effect on the mechanical properties of Cu–Cr–Zr alloys. Journal of Materials Research and Technology.DOI
285. Yongfeng Geng, Yijie Ban, Xu Li, Yi Zhang, Yanlin Jia, Baohong Tian, Meng Zhou, Yong Liu, Alex A. Volinsky, Kexing Song, Shunlong Tang (2021). Excellent mechanical properties and high electrical conductivity of Cu-Co-Si-Ti alloy due to multiple strengthening. Materials Science and Engineering A.DOI
286. Chaomin Zhang, Pan Xie, Yong Jiang, Sheng Zhan, W.Q. Ming, Jianghua Chen, Kexing Song, Hao Zhang (2021). Double-Shelled L12 Nano-structures in Quaternary Al–Er–Sc–Zr Alloys: Origin and Critical Significance. Acta Metallurgica Sinica (English Letters).DOI
287. Yanmin Zhang, Kexing Song, Shuaishuai Zhang, Yaoli Wang, Zaoli Zhang (2021). Hardness and failure assessment of a hot extrusion punch during service. Engineering Failure Analysis.DOI
288. Yingbin Chen, Qishan Huang, Qi Fang Zhu, Kexing Song, Yanjun Zhou, Haofei Zhou, Jiangwei Wang (2021). Coordinated grain boundary deformation governed nanograin annihilation in shear cycling. Journal of Material Science and Technology.DOI
289. Xiangfeng Zhang, Xiuhua Guo, Kexing Song, Xu Wang, Jiang Feng, Shaolin Li, Huanran Lin (2021). Simulation and verification of thermal conductivity of CuCr30 contact material based on morphological changes of Cr particles. Materials Today Communications.DOI
290. Xiuhua Guo, Yubo Yang, Kexing Song, Shaolin Li, Feng Jiang, Xu Wang (2021). Arc erosion resistance of hybrid copper matrix composites reinforced with CNTs and micro-TiB2 particles. Journal of Materials Research and Technology.DOI
291. Huanran Lin, Xiuhua Guo, Kexing Song, Jiang Feng, Shaolin Li, Xiangfeng Zhang (2021). Synergistic strengthening mechanism of copper matrix composite reinforced with nano-Al 2 O 3 particles and micro-SiC whiskers. Nanotechnology Reviews.DOI
292. Longlong Lu, Yanmin Zhang, Kexing Song, Xiuhua Guo, Yan Li, Shangguang Li, Fei Zhou (2021). Structural characterization and nanoscale strain field analysis of α/β interface layer of a near α titanium alloy. Nanotechnology Reviews.DOI
293. Yaoli Wang, Kexing Song, Jilin He, Ran Yang, Yanjun Zhou, Jun Ci Cao, Chu Chun Cheng (2021). Abnormal structure and properties of copper–silver bar billet by cold casting. REVIEWS ON ADVANCED MATERIALS SCIENCE.DOI
294. 姜业欣，娄花芬，解浩峰，李廷举，宋克兴，刘雪峰，运新兵，汪航，肖柱，李周（2020）. 先进铜合金材料发展现状与展望. 《中国工程科学》, Vol. 22, No. 5.下载原文
295. 王要利，张彦敏，宋克兴，张帅帅，韩文奎，葛学元，左鹏鹏（2020）. 回火温度对4Cr5MoSiV1Ti钢组织性能的影响. 《机械工程材料》.
296. 韩文奎，张彦敏，王要利，宋克兴，张帅帅（2020）. 4Cr5MoSiV1Ti钢的过冷奥氏体连续冷却转变曲线. 《机械工程材料》.
297. 宋克兴（2020）. 铜基/银基丝线材制备加工技术. 《冶金工业出版社》.
298. 刘佳琪，陈学文，皇涛，杜科学，宋克兴（2020）. 2A12铝合金临界损伤值测定及试验验证. 《塑性工程学报》.
299. 张彦敏，王永健，张帅帅，韩文奎，王要利，宋克兴（2020）. 含钛H13钢热变形行为及热加工图. 《塑性工程学报》.
300. 孔令宝，周延军，宋克兴，封存利，曹军，李周，王强松，解浩峰，皇涛，张朝民，程楚，李韶林（2020）. 冷拉拔变形量对铜银合金线材组织性能的影响. 《塑性工程学报》.
301. 国秀花，林焕然，宋克兴，王旭，张祥峰，冯江（2020）. 多粒径TiB2/Cu复合材料耐电弧侵蚀行为. 《复合材料学报》.DOI
302. 丁宗业，贾淑果，宁向梅，刘平，赵培峰，宋克兴（2020）. Cu-Cr-Zr合金的高温热变形行为. 《中国有色金属学报》.
303. 张帅帅，张彦敏，宋宇，韩文奎，宋克兴（2020）. QCr0.5合金的热变形行为及热加工图. 《机械工程材料》.
304. 孔令宝，周延军，宋克兴，曹军，吕长春，李科，刘庆宾，吴保安，唐会毅，张学宾，皇涛（2020）. 不同温度退火后Cu-Ag合金的组织和性能. 《机械工程材料》.
305. 华云筱，宋克兴，何季麟，皇涛，周延军，封存利，丁雨田，刘海涛，胡勇，曹军，张朝民，程楚（2020）. 冷拉拔对单晶Cu晶粒取向及断裂机理的影响. 《特种铸造及有色合金》.DOI
306. 周志红，张彦敏，韩文奎，宋克兴，曹军，米绪军，李周，周延军，刘海涛（2020）. Cu-20Ag合金冷型竖引连铸结晶器设计. 《特种铸造及有色合金》.DOI
307. 孔令宝，周延军，宋克兴，封存利，康军伟，曹军，李周，牛立业，郭慧稳（2020）. 拉拔变形和热处理对铜银合金组织性能的影响. 《特种铸造及有色合金》.DOI
308. 袁鹏飞，皇涛，宋克兴，苏娟华，周延军，曹军，程楚，张朝民，张学宾（2020）. 拉拔变形量对Cu-2Ag合金丝线材组织和性能的影响. 《特种铸造及有色合金》.DOI
309. 郭保江，周延军，张彦敏，孔令宝，康军伟，宋克兴，曹军，周志云（2020）. 时效时间对Cu-3.5Ag合金性能及其纳米析出相特征的影响. 《材料热处理学报》.DOI
310. 康军伟，周延军，刘海涛，宋克兴，张勇，孔令宝，吕官丽，岳丽娟（2020）. C17200合金热变形行为及热加工图. 《材料热处理学报》.DOI
311. 宋克兴，周延军，米绪军，肖柱，曹军，丁雨田，吴保安，封存利，李周，陈鼎彪，吕长春，胡勇，丁勇（2020）. 铜基丝线材制备和组织性能研究进展. 《中国有色金属学报》.
312. 吕官丽，周延军，苏娟华，孔令宝，康军伟，杜宜博，宋克兴，牛立业，郭慧稳（2020）. C19400合金高温拉伸性能和断口形貌. 《材料热处理学报》.DOI
313. 张朝民，宋克兴，程楚，周延军，米绪军，李周，肖柱，孔令宝，康军伟，袁鹏飞（2020）. 冷拉拔导致的大塑性变形对定向凝固Cu-4 mass%Ag合金组织和性能的影响. 《材料热处理学报》.DOI
314. 冯孟奇，贾淑果，李韶林，宋克兴，国秀花，张祥峰，林焕然（2020）. 铜/碳复合材料的研究进展. 《材料热处理学报》.DOI
315. 杨冉，王要利，宋克兴，周延军，曹军，吕长春，丁雨田，胡勇（2020）. Ag含量对竖引连铸Cu-Ag合金组织和性能影响. 《材料热处理学报》.
316. 曹军，徐旭，张俊超，宋克兴，周延军，花涵（2020）. 键合参数对Ag-5Au键合合金线无空气焊球及键合强度影响研究. 《功能材料》.
317. 陈学文，王继业，杨喜晴，皇涛，宋克兴（2020）. Cr8合金钢热变形行为及位错密度演变规律. 《吉林大学学报(工学版)》.DOI
318. 张祥峰，国秀花，宋克兴，冯江，林焕然，王旭（2020）. 不同粒径TiB2/Cu复合材料热传导模拟与实验. 《复合材料学报》.
319. 康军伟，周延军，宋克兴，牛立业，杨婧钊，孔令宝，郭慧稳，杜宜博（2020）. 高强高导Cu-Cr-X合金退火态组织性能. 《材料热处理学报》.DOI
320. 张丹丹，宋克兴，皇涛，张学宾，侯文武，霍华，钟建英（2020）. C194铜合金轧制冷塑性变形有限元模型的建立. 《锻压技术》.DOI
321. 冯江，宋克兴，何季麟，程楚，张朝民，周延军，曹军，皇涛，张学宾（2020）. 多道次拉拔对Cu-1Ag合金微细丝线组织及性能研究. 《铸造技术》.DOI
322. 宁兆生，宋克兴，张彦敏，赵军，郑松翔，杨海涛，张志勇，陈德明（2020）. 浅析钛合金真空自耗熔炼工艺的有限元仿真. 《2020中国铸造活动周》.DOI
323. Jun Ci Cao, Junchao Zhang, Kexing Song, Baoan Wu, Yong Ming Ding, Dingbiao Chen, Yutian Ding (2020). Effect of Ceramic Capillary Parameters on Bonded Morphology and Strength. Micromachines.DOI
324. Kexing Song, Yongfeng Geng, Yijie Ban, Yi Zhang, Li Zhou, Xujun Mi, Jun Ci Cao, Yanjun Zhou, Xuebin Zhang (2020). Effects of strain rates on dynamic deformation behavior of Cu-20Ag alloy. Journal of Material Science and Technology.DOI
325. Xiuhua Guo, Kexing Song, Xu Wang, Guohui Li, Zaoli Zhang (2020). Effect of TiB 2 particle size on the material transfer behaviour of Cu–TiB 2 composites. Materials Science and Technology.DOI
326. Yijie Ban, Yi Zhang, Baohong Tian, Kexing Song, Meng Zhou, Xiaohui Zhang, Yanlin Jia, Xu Li, Yongfeng Geng, Yong Liu, Alex A. Volinsky (2020). EBSD analysis of hot deformation behavior of Cu-Ni-Co-Si-Cr alloy. Materials Characterization.DOI
327. Yongfeng Geng, Yijie Ban, Bingjie Wang, Xu Li, Kexing Song, Yi Zhang, Yanlin Jia, Baohong Tian, Yong Liu, Alex A. Volinsky (2020). A review of microstructure and texture evolution with nanoscale precipitates for copper alloys. Journal of Materials Research and Technology.DOI
328. Jingzhao Yang, Kun Bu, Kexing Song, Yanjun Zhou, Tao Huang, Liye Niu, Huiwen Guo, Yibo Du, Junwei Kang (2020). Influence of low-temperature annealing temperature on the evolution of the microstructure and mechanical properties of Cu-Cr-Ti-Si alloy strips. Materials Science and Engineering A.DOI
329. Yibo Du, Yanjun Zhou, Kexing Song, Xianfeng Zhang, David Hui (2020). Investigation of the retained austenite orientation in iron precipitates of martensitic transformation. Materials Letters.DOI
330. Jun Ci Cao, Junchao Zhang, John Persic, Kexing Song (2020). Effects of Bonding Parameters on Free Air Ball Properties and Bonded Strength of Ag-10Au-3.6Pd Alloy Bonding Wire. Micromachines.DOI
331. Qi Fang Zhu, Shuchun Zhao, Chuang Deng, Xianghai An, Kexing Song, S.X. Mao, J.W. Wang (2020). In situ atomistic observation of grain boundary migration subjected to defect interaction. Acta Materialia.DOI
332. Tao Huang, Zhuo Fei Song, Fuxiao Chen, Junqing Guo, Yanbo Pei, Binghui Xing, Nan Xiang, Kexing Song (2020). Influence of the Anisotropy on the Microstructure and Mechanical Properties of Ti/Al Laminated Composites. Materials.DOI
333. Shuchun Zhao, Qi Fang Zhu, Kexing Song, Haofei Zhou, Jiangwei Wang (2020). Role of intersecting grain boundary on the deformation of twin-twin intersection. Scripta Materialia.DOI
334. Yijie Ban, Yi Zhang, Baohong Tian, Yanlin Jia, Kexing Song, Xu Li, Meng Zhou, Yong Liu, Alex A. Volinsky (2020). Microstructure Evolution in Cu-Ni-Co-Si-Cr Alloy During Hot Compression by Ce Addition. Materials.DOI
335. Chaomin Zhang, Yong Jiang, Xiuhua Guo, Kexing Song (2020). Formation and Relative Stabilities of Core-Shelled L12-Phase Nano-structures in Dilute Al–Sc–Er Alloys. Acta Metallurgica Sinica (English Letters).DOI
336. Fei Xiang Long, Xiuhua Guo, Kexing Song, Shuguo Jia, Vladislav Yakubov, Shaolin Li, Yubo Yang, Shuhua Liang (2020). Synergistic strengthening effect of carbon nanotubes (CNTs) and titanium diboride (TiB2) microparticles on mechanical properties of copper matrix composites. Journal of Materials Research and Technology.DOI
337. Yongfeng Geng, Yi Zhang, Kexing Song, Yanlin Jia, Xu Li, Heinz-Rolf Stock, Honglei Zhou, Baohong Tian, Yong Liu, Alex A. Volinsky, Xiaohui Zhang, Ping Liu, Xiaohong Chen (2020). Effect of Ce addition on microstructure evolution and precipitation in Cu-Co-Si-Ti alloy during hot deformation. Journal of Alloys and Compounds.DOI
338. Shuchun Zhao, Qi Fang Zhu, Xianghai An, Hua Wei, Kexing Song, Scott X. Mao, Jiangwei Wang (2020). In situ atomistic observation of the deformation mechanism of Au nanowires with twin–twin intersection. Journal of Material Science and Technology.DOI
339. Bingjie Wang, Yi Zhang, Baohong Tian, Yanlin Jia, Alex A. Volinsky, Vladislav Yakubov, Yong Liu, Kexing Song, Ming Fu (2020). Nanoscale precipitates evolution and strengthening mechanism of the aged Cu-Mg-Fe-Sn-P-Y electrical contact wire. Journal of Materials Research and Technology.DOI
340. Jiang Feng, Shuhua Liang, Kexing Song, Xiuhua Guo, Yanjun Zhou (2020). Micro–Nano Dual-Scale Particle-Reinforced TiB2/Cu-0.5Cr Composites Prepared by Vacuum Arc Melting. Journal of Materials Engineering and Performance.DOI
341. Yongfeng Geng, Xu Li, Yi Zhang, Yanlin Jia, Honglei Zhou, Baohong Tian, Yong Liu, Alex A. Volinsky, Xiaohui Zhang, Kexing Song, Ping Liu, Xiaohong Chen (2020). Microstructure evolution of Cu-1.0Co-0.65Si-0.1Ti alloy during hot deformation. Vacuum.DOI
342. Jiang Feng, Kexing Song, Shuhua Liang, Xiuhua Guo, Yihui Jiang (2020). Electrical wear of TiB2 particle-reinforced Cu and Cu–Cr composites prepared by vacuum arc melting. Vacuum.DOI
343. Chu Chun Cheng, Kexing Song, Xujun Mi, Baoan Wu, Zhu Xiao, Haofeng Xie, Yanjun Zhou, Xiuhua Guo, Haitao Liu, Dingbiao Chen, Xiaoyu Shen, Yong Ming Ding (2020). Microstructural evolution and properties of Cu–20 wt% Ag alloy wire by multi-pass continuous drawing. Nanotechnology Reviews.DOI
344. Lingbao Kong, Yanjun Zhou, Kexing Song, David Hui, Hao Hu, Baojiang Guo, Junwei Kang, Cunli Feng, Jun Ci Cao (2020). Effect of aging on properties and nanoscale precipitates of Cu-Ag-Cr alloy. Nanotechnology Reviews.DOI
345. Zhu Yu-Jie, Jingling Ma, Guangxin Wang, Kexing Song, H.‐R. Stock (2020). Corrosion behaviour of multilayer CrN coatings deposited by hybrid HIPIMS after oxidation treatment. Nanotechnology Reviews.DOI
346. 王永健，张彦敏，王要利，韩文奎，于宜洛，宋克兴（2019）. Ti含量对H13热作模具钢组织及性能的影响. 《模具工业》.DOI
347. 皇涛，宋宇，张丹丹，张丰收，宋克兴（2019）. 基于修正的Archard磨损理论模型的H13模具钢热挤压磨损研究. 《锻压技术》.DOI
348. 张启航，苏娟华，张学宾，侯文武，皇涛，宋克兴（2019）. C19400铜板带可逆热轧有限元模型的建立及分析. 《锻压技术》.DOI
349. 张晓辉，田保红，刘勇，张毅，宋克兴，李全安（2019）. 真空热压烧结-内氧化法制备Al2O3-Cu/（W,Cr）触头材料的电接触性能. 《中国有色金属学报》.DOI
350. 刘健波，张学宾，杨留栓，宋克兴，刘海涛，葛学元（2019）. 等温淬火时间对D2钢组织与力学性能的影响. 《材料热处理学报》.
351. 皇涛，王锟，陈拂晓，郭俊卿，陈学文，宋克兴（2019）. 钛-铝层状复合板冷塑性变形过程损伤演化行为. 《河南科技大学学报(自然科学版)》.
352. 孔令宝，周延军，宋克兴，郭保江，康军伟，封存利，周志云（2019）. 热处理对Cu-0.52Ag-0.22Cr合金组织和性能的影响. 《材料热处理学报》.DOI
353. 国秀花，宋克兴，李国辉，冯江，龙飞（2019）. 不同TiB2颗粒粒径的TiB2/Cu复合材料耐电弧侵蚀行为. 《复合材料学报》.DOI
354. 张启航，苏娟华，张学宾，皇涛，侯文武，霍华，宋克兴（2019）. 基于MATLAB的铸态C19400合金高温变形行为及本构方程. 《材料热处理学报》.
355. 耿永锋，张毅，田保红，柴哲，王冰洁，刘勇，宋克兴（2019）. 形变热处理对Cu-0.80Cr-0.30Zr-0.03P合金时效性能的影响. 《材料热处理学报》.DOI
356. 王永健，张彦敏，王要利，宋克兴，王云飞（2019）. 钛微合金化新型模具钢成分设计及组织性能分析. 《河南科技大学学报(自然科学版)》.DOI
357. 陈学文，张家银，皇涛，宋克兴，朱红亮，杜昱青（2019）. 基于修正Voce模型的2A12铝合金流动应力模型. 《材料热处理学报》.DOI
358. 权思佳，宋克兴，张彦敏，张斌斌，王启，李炎（2019）. 基于MATLAB的Ti80合金热变形行为及热加工图. 《稀有金属材料与工程》.
359. 龙飞，贾淑果，国秀花，宋克兴，冯江，张胜利，梁淑华（2019）. 碳纳米管和TiB2混杂增强铜复合材料的电弧侵蚀行为. 《复合材料学报》.DOI
360. 张胜利，国秀花，宋克兴，梁淑华，周延军（2019）. 多粒径TiB2颗粒增强铜基复合材料的制备与载流摩擦磨损性能. 《复合材料学报》.DOI
361. 孙国强，刘勇，田保红，张毅，王冰洁，宋克兴（2019）. Cu-0.8Mg-0.15Ce合金热变形行为与机制研究. 《中国稀土学报》.
362. 郭保江，周延军，张彦敏，宋克兴，孔令宝，牛立业，康军伟（2019）. 连铸速度对Cu-3.5Ag合金组织性能的影响. 《特种铸造及有色合金》.DOI
363. 杨冉，文九巴，周延军，宋克兴，牛立业，李士凯，郭慧稳，郁炎（2019）. 热处理对Cu-6.9Ni-2.97Al-0.99Fe-1.06Mn合金组织和腐蚀性能的影响. 《材料热处理学报》.
364. 宋正成，贾淑果，周延军，宋克兴，米绪军，李周（2019）. Cu-7Ni-7Al合金在人工海水中的腐蚀特征. 《材料热处理学报》.DOI
365. 张晓辉，田保红，薛慧慧，刘勇，张毅，顾正彬，宋克兴（2019）. 氧化石墨烯/弥散铜钨铬电触头材料的性能. 《材料热处理学报》.DOI
366. Shaolin Li, Xiuhua Guo, Shengli Zhang, Jiang Feng, Kexing Song, Shuhua Liang (2019). Arc erosion behavior of TiB2/Cu composites with single-scale and dual-scale TiB2 particles. Nanotechnology Reviews.DOI
367. Yongfeng Geng, Xu Li, Honglei Zhou, Yi Zhang, Yanlin Jia, Baohong Tian, Yong Liu, Alex A. Volinsky, Xiaohui Zhang, Kexing Song, Guangxin Wang, Lihua Li, Jinrui Hou (2019). Effect of Ti addition on microstructure evolution and precipitation in Cu–Co–Si alloy during hot deformation. Journal of Alloys and Compounds.DOI
368. Xiaohui Zhang, Yi Zhang, Baohong Tian, Kexing Song, Ping Liu, Yanlin Jia, Xiaohong Chen, Junchao An, Zhuan Zhe Zhao, Yong Liu, Alex A. Volinsky, Xu Li, Ting Yin (2019). Review of nano-phase effects in high strength and conductivity copper alloys. Nanotechnology Reviews.DOI
369. Jiang Feng, Shuhua Liang, Xiuhua Guo, Yi Zhang, Kexing Song (2019). Electrical conductivity anisotropy of copper matrix composites reinforced with SiC whiskers. Nanotechnology Reviews.DOI
370. Ran Yang, Jiuba Wen, Yanjun Zhou, Kexing Song, Liye Niu, Huiwen Guo, Yan Yu (2019). Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy. Materials Science and Technology.DOI
371. Xiaohui Zhang, Yi Zhang, Baohong Tian, Yanlin Jia, Yong Liu, Kexing Song, Alex A. Volinsky, Huihui Xue (2019). Cr effects on the electrical contact properties of the Al2O3-Cu/15W composites. Nanotechnology Reviews.DOI
372. Yaoli Wang, Kexing Song, Yanmin Zhang (2019). Microstructure evolution mechanism near the fracture lip of 4Cr5MoSiV1 steel during deforming at 580 °C. Journal of Materials Research and Technology.DOI
373. Xiaohui Zhang, Yi Zhang, Baohong Tian, Yanlin Jia, Ming Fu, Yong Liu, Kexing Song, Alex A. Volinsky, Xiao Ping Yang, Hang Sun (2019). Graphene oxide effects on the properties of Al2O3-Cu/35W5Cr composite. Journal of Material Science and Technology.DOI
374. Fei Xiang Long, Xiuhua Guo, Kexing Song, Shuguo Jia, Vladislav Yakubov, Shaolin Li, Shuhua Liang (2019). Enhanced arc erosion resistance of TiB2/Cu composites reinforced with the carbon nanotube network structure. Materials & Design.DOI
375. Jiang Feng, Shuhua Liang, Kexing Song, Xiuhua Guo, Yi Zhang, Guohui Li, Alex A. Volinsky (2019). Effects of Particle Characteristic Parameters on the Electrical Conductivity of TiB2/Cu Composites: A Modified Model for Predicting Their Electrical Conductivity. Journal of Materials Engineering and Performance.DOI
376. Yaoli Wang, Kexing Song, Yanmin Zhang (2019). High-temperature softening mechanism and kinetic of 4Cr5MoSiV1 steel during tempering. Materials Research Express.DOI
377. Zhuan Zhe Zhao, Yi Zhang, Baohong Tian, Yanlin Jia, Yong Liu, Kexing Song, Alex A. Volinsky (2019). Co effects on Cu-Ni-Si alloys microstructure and physical properties. Journal of Alloys and Compounds.DOI
378. Ran Yang, Jiuba Wen, Yanjun Zhou, Kexing Song, Yucong Zheng (2019). An Investigation of the Corrosion Mechanisms of Cu-7Ni-3Al-1Fe-1Mn Alloy in Chloride-Containing Environment. Journal of Materials Engineering and Performance.DOI
379. Xiaohui Zhang, Yi Zhang, Baohong Tian, Yanlin Jia, Yong Liu, Kexing Song, Alex A. Volinsky (2019). Thermal deformation behavior of the Al2O3-Cu/(W, Cr) electrical contacts. Vacuum.DOI
380. Yaoli Wang, Kexing Song, Yanmin Zhang, Guangxin Wang (2019). Microstructure evolution and fracture mechanism of H13 steel during high temperature tensile deformation. Materials Science and Engineering A.DOI
381. Yanmin Zhang, Yanjun Zhou, Xiuhua Guo, Kexing Song, Xuebin Zhang (2019). Fatigue Failure Prediction Model and Verification of Hot Extrusion Die. Procedia Manufacturing.DOI
382. 乔景振，田保红，张毅，周延军，国秀花，宋克兴（2018）. Ti含量对耐蚀铜合金冲蚀性能的影响. 《材料热处理学报》.
383. 权思佳，宋克兴，张斌斌，王启，郑开宏，张丹丹（2018）. 热处理工艺对Ti80合金显微组织的影响. 《材料热处理学报》.
384. 宋正成，贾淑果，周延军，宋克兴，米绪军，李周（2018）. 均匀化退火对新型Cu-Ni-Al合金耐蚀性能的影响. 《材料热处理学报》.
385. 陈学文，王纳纳，皇涛，陈拂晓，宋克兴（2018）. 超超临界转子用X12钢高温变形行为及基于应变补偿的本构模型. 《材料热处理学报》.
386. 冯江，宋克兴，梁淑华，国秀花（2018）. 混杂增强铜基复合材料的设计与研究进展. 《材料热处理学报》.
387. 王要利，宋克兴，张彦敏（2018）. 热作模具钢热疲劳行为的研究现状. 《材料热处理学报》.
388. 刘健波，张学宾，宋克兴，杨留栓，葛学元（2018）. 固溶-高温回火对D2钢组织性能的影响. 《材料热处理学报》.
389. 乔景振，田保红，张毅，周延军，国秀花，宋克兴（2018）. Cu-7Ni-7Al-2Fe-2Mn-0.5Ti合金高温热变形行为. 《材料热处理学报》.
390. 乔景振，田保红，张毅，周延军，国秀花，宋克兴（2018）. Y对退火态耐蚀铜合金冲蚀性能影响. 《稀有金属》.
391. 陈赛，张彦敏，宋克兴，葛学元（2018）. 6082铝合金多筋连接件成形工艺分析及模具设计. 《塑性工程学报》.
392. 张彦敏，陈赛，葛学元，王文超，张丹丹，宋克兴（2018）. 6082铝合金热变形行为及热加工图. 《塑性工程学报》.
393. 宋宇，张丰收，皇涛，宋克兴，左鹏鹏（2018）. 基于高温磨损的H13热作模具钢磨损规律和模型研究. 《塑性工程学报》.
394. 皇涛，杨方方，詹梅，郭俊卿，陈学文，陈拂晓，宋克兴（2018）. TA18高强钛管数控弯曲成形截面扁化研究（英文）. 《稀有金属材料与工程》.
395. 周延军，宋克兴，米绪军，刘勇，杨少丹，李周（2018）. Cu-Be-Co-Zr合金时效析出动力学（英文）. 《稀有金属材料与工程》.
396. 田卡，田保红，刘勇，张毅，宋克兴（2018）. 高Zr含量Cu-1.0%Zr-0.15%Y合金高温变形行为. 《稀有金属材料与工程》.
397. 邢岩，李周，甘雪萍，李思，张洋，张县委，宋克兴（2018）. 形变热处理对Cu-15Ni-8Sn系合金组织结构与性能的影响. 《稀有金属材料与工程》.
398. 李国辉，刘勇，国秀花，冯江，宋克兴，田保红（2018）. TiB2/Cu复合材料的电弧侵蚀行为. 《复合材料学报》.
399. 陈学文，王继业，皇涛，周旭东，宋克兴（2018）. 基于L-J位错密度模型模拟Cr8合金钢动态再结晶行为. 《钢铁》.
400. 李红霞，宋克兴，张彦敏，田保红，任凤章，王宇飞（2018）. 稀土元素La对Zn-Cu-Ti-Mg合金组织和性能的影响. 《金属热处理》.
401. 乔景振，田保红，宋克兴，周延军，张毅，张彦敏（2018）. 含Ti镍铝青铜合金的人工海水冲蚀行为. 《金属热处理》.
402. 张胜利，宋克兴，国秀花，冯江，龙飞，梁淑华（2018）. TiB2颗粒混杂对TiB2/Cu复合材料微观组织和性能的影响. 《材料热处理学报》.
403. 国秀花，龙飞，周延军，王旭，宋克兴（2018）. 粉末冶金法制备氧化物颗粒增强Cu基复合材料. 《特种铸造及有色合金》.DOI
404. 周延军，宋克兴（2018）. 高性能铜合金及制备加工技术——河南科技大学铜合金团队近期研究工作介绍. 《2018年中国铜加工产业年度大会暨中国铜产业黄石高峰论坛文集》.
405. Bingjie Wang, Yi Zhang, Baohong Tian, Vladislav Yakubov, Junchao An, Alex A. Volinsky, Yong Liu, Kexing Song, Lihua Li, Ming Fu (2018). Effects of Ce and Y addition on microstructure evolution and precipitation of Cu-Mg alloy hot deformation. Journal of Alloys and Compounds.DOI
406. Xiaohui Zhang, Yi Zhang, Baohong Tian, Junchao An, Zhuan Zhe Zhao, Alex A. Volinsky, Yong Liu, Kexing Song (2018). Arc erosion behavior of the Al2O3-Cu/(W, Cr) electrical contacts. Composites Part B Engineering.DOI
407. Ran Yang, Jiuba Wen, Yanjun Zhou, Kexing Song, Zhengcheng Song (2018). Effect of Al Element on the Microstructure and Properties of Cu-Ni-Fe-Mn Alloys. Materials.DOI
408. Shizhong An, Wuhui Li, Kexing Song, Tianli Zhang, Chengbao Jiang (2018). Phase transformation in anisotropic nanocrystalline SmCo5 magnets. Journal of Magnetism and Magnetic Materials.DOI
409. Zhiyuan Zhu, Yuanfei Cai, Yi Sui, Kexing Song, Yanjun Zhou, Jiasheng Zou (2018). Precipitation Characteristics of the Metastable γ″ Phase in a Cu-Ni-Be Alloy. Materials.DOI
410. Bingjie Wang, Yi Zhang, Baohong Tian, Junchao An, Alex A. Volinsky, Huili Sun, Yong Liu, Kexing Song (2018). Effects of Ce addition on the Cu-Mg-Fe alloy hot deformation behavior. Vacuum.DOI
411. Yulai Song, F S Zhang, Tao Huang, Kexing Song (2018). Study on Thermal Deformation Behavior of TC4 – ELI Titanium Alloy. IOP Conference Series Materials Science and Engineering.DOI
412. Y M Zhang, Y Y Qiao, Kexing Song, Shuo Yang (2018). Effect of composition design (Cu, Ti and Mg) and optimization on deformed Zn–Cu–Ti alloy. Emerging Materials Research.DOI
413. Yi Zhang, Huili Sun, Alex A. Volinsky, Bingjie Wang, Baohong Tian, Yong Liu, Kexing Song (2018). Constitutive Model for Hot Deformation of the Cu-Zr-Ce Alloy. Journal of Materials Engineering and Performance.DOI
414. 张毅，柴哲，孙慧丽，田保红，刘勇，安俊超，宋克兴（2017）. 高铁用GCr15轴承钢的热处理工艺研究进展. 《有色金属材料与工程》.
415. 陈赛，张彦敏，宋克兴，杨少丹，龙伟民，陈阳（2017）. 5CrMnMo热挤压模具断裂失效分析. 《塑性工程学报》.
416. 朱顺新，刘勇，李艳，田保红，张毅，宋克兴（2017）. Cu-0.4Zr-0.15Y合金动态再结晶临界条件. 《材料热处理学报》.
417. 王要利，宋克兴，王广欣，张柯柯（2017）. 水洗钎剂下SnAgCuRExNi与铜引线的润湿适配性. 《焊接学报》.
418. 宋克兴（2017）. 高强高导铜合金开发及应用. 《2017中国铜加工产业年度大会》.
419. 王迎鲜，贾淑果，周延军，宋克兴，米绪军（2017）. 微量Co对Cu-0.2Be合金组织性能的影响. 《有色金属材料与工程》.
420. 齐敏杰，张学宾，宋克兴，于宜洛，陆长青，陈学富（2017）. 35MnB钢高温变形行为及本构方程. 《塑性工程学报》.
421. 杨少丹，宋克兴，张彦敏，周延军，陈赛（2017）. 基于工业CT扫描的材料内部裂纹表征与分析. 《金属热处理》.
422. 王迎鲜，贾淑果，周延军，宋克兴，李周（2017）. 时效时间对Cu-0.2Be-0.5Co合金组织及性能的影响. 《金属热处理》.
423. 张彦敏，王永健，陈赛，甘春雷，王云飞，宋克兴（2017）. Cu-Al2O3（0.68%）弥散强化铜合金塑性变形特性. 《精密成形工程》.
424. 李晓孟，张彦敏，国秀花，宋克兴，李周，米绪军（2017）. 稀土对挤压态Cu-7Ni-7Al-2Fe-2Mn合金耐蚀性能影响. 《中国稀土学报》.
425. 丁宗业，贾淑果，宁向梅，宋克兴，刘平（2017）. 高强高导Cu-Cr-Zr合金时效性能. 《中国有色金属学报》.
426. 李晓孟，张彦敏，国秀花，宋克兴，李周（2017）. 流动海水中铜镍合金管材的冲刷腐蚀行为. 《河南科技大学学报(自然科学版)》.
427. 赵亚永，张彦敏，宋克兴（2017）. Al2O3/Cu弥散强化铜合金应力松弛行为. 《河南科技大学学报(自然科学版)》.
428. 李晓孟，张彦敏，宋克兴，国秀花，周延军（2017）. 稀土对Cu-Ni-Al合金耐冲刷腐蚀性能的影响. 《材料与冶金学报》.
429. 王迎鲜，贾淑果，周延军，宋克兴，李周（2017）. Co元素对挤压态铍青铜合金组织性能的影响. 《材料热处理学报》.
430. 李国辉，刘勇，国秀花，冯江，宋克兴，田保红，龙伟民（2017）. 放电等离子烧结制备TiB2/Cu复合材料的组织和性能. 《材料热处理学报》.
431. Xiuhua Guo, Yanjun Zhou, Kexing Song, Xu Wang, Shuhua Liang (2017). Microstructure and properties of Cu–Mg alloy treated by internal oxidation. Materials Science and Technology.DOI
432. Yi Zhang, Huili Sun, Alex A. Volinsky, Baohong Tian, Kexing Song, Bingjie Wang, Yong Liu (2017). Hot workability and constitutive model of the Cu-Zr-Nd alloy. Vacuum.DOI
433. Xiuhua Guo, Kexing Song, Shuhua Liang, Yanjun Zhou, Xu Wang (2017). Relationship between the MgOp/Cu interfacial bonding state and the arc erosion resistance of MgO/Cu composites. Journal of materials research/Pratt's guide to venture capital sources.DOI
434. Yi Zhang, Huili Sun, Alex A. Volinsky, Bingjie Wang, Baohong Tian, Zhe Chai, Yong Liu, Kexing Song (2017). Small Y Addition Effects on Hot Deformation Behavior of Copper‐Matrix Alloys. Advanced Engineering Materials.DOI
435. Shengya Ji, Shuhua Liang, Kexing Song, Hongxia Li, Zhou Li (2017). Evolution of microstructure and mechanical properties in Zn–Cu–Ti alloy during severe hot rolling at 300 °C. Journal of materials research/Pratt's guide to venture capital sources.DOI
436. Huili Sun, Yi Zhang, Alex A. Volinsky, Bingjie Wang, Baohong Tian, Kexing Song, Zhe Chai, Yong Liu (2017). Effects of Ag Addition on Hot Deformation Behavior of Cu–Ni–Si Alloys. Advanced Engineering Materials.DOI
437. Yaoli Wang, Guangxin Wang, Kexing Song, Keke Zhang (2017). Effect of Ni addition on the wettability and microstructure of Sn2.5Ag0.7Cu0.1RE solder alloy. Materials & Design.DOI
438. 田卡，田保红，刘勇，张毅，宋克兴，柴哲（2016）. 高锆含量Cu-1%Zr-0.15%Ce合金热变形行为研究. 《中国稀土学报》.
439. 田卡，田保红，张毅，刘勇，宋克兴，杜勇（2016）. 铈对Cu-Zr合金热变形激活能和性能的影响. 《中国稀土学报》.
440. 冀盛亚，梁淑华，宋克兴，王青（2016）. 稀土La对Zn-Cu-Ti合金显微组织和力学性能的影响. 《中国有色金属学报》.
441. 冀盛亚，梁淑华，宋克兴，李红霞，李周（2016）. Zn-Cu-Ti合金研究现状及发展方向. 《热加工工艺》.
442. 赵亚永，张彦敏，宋克兴，赵培峰（2016）. 温度和变形量对6061铝合金粘附行为的影响. 《特种铸造及有色合金》.
443. 张素霞，宋克兴，国秀花，张彦敏，李晓孟（2016）. 管径对B10管的冲刷腐蚀性能的影响. 《特种铸造及有色合金》.
444. 殷婷，田保红，张毅，刘勇，宋克兴（2016）. Cu-W-TiC复合材料的电接触特性研究. 《热加工工艺》.
445. 朱顺新，刘勇，李国辉，田保红，张毅，宋克兴（2016）. SPS法制备Cu-10Cr复合材料的电弧特性. 《材料热处理学报》.
446. Shengya Ji, Shuhua Liang, Kexing Song, H. X. Li, Zhuyao Li (2016). Effects of lanthanum on the microstructure, electrochemical behavior, and anti‐corrosion properties of zinc–copper–titanium alloy in 3% sodium chloride solution. Materials and Corrosion.DOI
447. Yi Zhang, Huili Sun, Alex A. Volinsky, Baohong Tian, Kexing Song, Zhe Chai, Ping Liu, Yong Liu (2016). Dynamic recrystallization behavior and processing map of the Cu–Cr–Zr–Nd alloy. SpringerPlus.DOI
448. Yanjun Zhou, Kexing Song, Jiandong Xing, Zhou Li, Xiuhua Guo (2016). Arc Erosion Behavior of Cu–0.23Be–0.84Co Alloy after Heat Treatment: An Experimental Study. Acta Metallurgica Sinica (English Letters).DOI
449. 乔艳艳，宋克兴，张彦敏，罗钧，李伟文（2015）. 热处理对变形Zn-Cu-Ti合金组织和性能的影响. 《河南科技大学学报(自然科学版)》.
450. 王庆福，张彦敏，国秀花，宋克兴（2015）. 在铜镁合金表面制备MgO/Cu复合材料内氧化层的组织和性能. 《机械工程材料》.
451. 李宁宁，宋克兴，周延军，张彦敏，何霞（2015）. 热处理对Cu-0.23Be-0.84Co合金性能和组织的影响. 《河南科技大学学报(自然科学版)》.
452. 李宁宁，宋克兴，周延军，张彦敏（2015）. 热处理对Cu-0.23Be-0.84Co合金性能组织的影响. 《第十一次全国热处理大会》.
453. 宋克兴，乔艳艳，张彦敏，邓猛（2015）. 热处理对变形Zn-Cu-Ti-Mg合金组织性能的影响. 《第十一次全国热处理大会》.
454. 李红霞，张彦敏，宋克兴，田保红（2015）. 自力型触指用高强高导铜合金带材的制备工艺. 《金属热处理》.
455. 丁宗业，贾淑果，宁向梅，苏娟华，宋克兴，田保红（2015）. Cu-Cr-Zr合金的高温热变形行为及加工图. 《第十一次全国热处理大会论文集》.
456. 赵亚永，张彦敏，宋克兴，赵培峰（2015）. 基于正交试验的6061铝合金热挤压粘附行为研究. 《材料研究与应用》.
457. 何霞，张彦敏，宋克兴，周延军，李宁宁（2015）. Cu-0.23Be-0.84Co合金热变形行为. 《塑性工程学报》.
458. 殷婷，田保红，张毅，刘勇，宋克兴（2015）. 放电等离子烧结Cu-W-TiC复合材料的制备及其热变形特性. 《中国有色金属学报》.
459. 王青，宋克兴，梁淑华，周延军，国秀花（2015）. 固溶时效Cu-0.88Cr合金连续拉拔变形断裂行为. 《材料热处理学报》.
460. 王青，梁淑华，宋克兴，国秀花，周延军（2015）. 第二相对析出强化铜合金大变形量多道次连续拉拔变形组织和性能的影响. 《西安理工大学学报》.
461. 白宁，张彦敏，宋克兴，李宁宁，何霞（2015）. 时效对Cu-0.33Cr-0.06Zr合金导电率与硬度的影响. 《金属热处理》.
462. Yumei Zhou, Kexing Song, J.D. Xing, Yiming Zhang (2015). Precipitation behavior and properties of aged Cu-0.23Be-0.84Co alloy. Journal of Alloys and Compounds.DOI
463. 郜建新，赵培峰，宋克兴，周伯楚（2014）. 高压开关自力型触头热挤压工艺研究. 《热加工工艺》.
464. 邓猛，贾淑果，陈少华，丁宗业，宋克兴（2014）. 铜镍硅锌镁合金的时效析出动力学. 《机械工程材料》.
465. 丁宗业，贾淑果，郭望望，邓猛，宋克兴，刘平（2014）. 非真空熔铸Cu-Cr-Zr合金的热变形行为及动态再结晶临界条件. 《稀有金属材料与工程》.
466. 邓猛，贾淑果，宋克兴，张彦敏，李伟文，谢从相（2014）. Zn-0.9Cu-0.026Ti合金的组织和性能. 《材料热处理学报》.
467. 国秀花，宋克兴，梁淑华，赵培峰，张永振（2014）. 制备工艺对Al2O3/Cu复合材料载流摩擦磨损性能的影响. 《材料热处理学报》.
468. 丁宗业，贾淑果，邓猛，宋克兴，刘平（2014）. Cu-0.36Cr-0.03Zr合金时效析出相. 《材料热处理学报》.
469. 张亚，宋克兴，刘亚民，赵培峰，张彦敏（2014）. 加压条件下固-液复合法制备Cu/Al复合材料. 《特种铸造及有色合金》.DOI
470. 宋克兴，张亚，张彦敏，国秀花（2014）. 铜/铝固-液复合研究. 《铸造》.
471. 王庆福，张彦敏，国秀花，宋克兴（2014）. 放电等离子烧结技术的研究现状及进展. 《稀有金属与硬质合金》.
472. 李红霞，王国强，宋克兴，张彦敏，国秀花（2014）. TiB2含量对弥散强化TiB2/Cu复合材料抗电蚀性能的影响. 《金属热处理》.
473. 何霞，张彦敏，宋克兴，周延军，李宁宁，赵培峰（2014）. Cu-0.23Be-0.84Co合金熔铸工艺及组织性能研究. 《铸造技术》.
474. 张彦敏，王海艳，罗钧，白宁，甘春雷，李伟文，宋克兴（2014）. 直流电流下Cu-0.33Cr-0.06Zr合金的时效动力学. 《特种铸造及有色合金》.
475. 邓猛，贾淑果，宋克兴，张彦敏，李伟文，张震志（2014）. Zn-2.12Cu-0.056Ti合金热变形行为的研究. 《特种铸造及有色合金》.
476. 王庆福，张彦敏，国秀花，宋克兴（2014）. SPS法制备MgO/Cu复合材料抗电蚀性能研究. 《特种铸造及有色合金》.
477. 白宁，张彦敏，汪美珍，宋克兴，乔艳艳（2014）. 直流电流对Cu-0.33Cr-0.06Zr合金导电性的影响. 《特种铸造及有色合金》.
478. 白宁，张彦敏，罗钧，王海艳，宋克兴（2014）. 直流电流时效对Cu-0.33Cr-0.06Zr合金显微硬度的影响. 《河南科技大学学报(自然科学版)》.
479. 宋克兴，李韶林，国秀花（2014）. TiB2含量对TiB2/Cu复合材料抗电蚀性能的影响. 《机械工程材料》.
480. 郜建新，赵培峰，宋克兴（2013）. 非回转体触头座挤压成形工艺与模具设计. 《模具工业》.
481. 王露娟，宋克兴，王青，高安江，张彦敏（2013）. 拉拔变形对不同直径纯铜线材组织性能的影响. 《河南科技大学学报(自然科学版)》.
482. 张亚，宋克兴，王青，张彦敏（2013）. 爆炸焊制备Al2O3/Cu-QCr0.5复合板工艺及性能. 《河南科技大学学报(自然科学版)》.
483. 李韶林，宋克兴，国秀花（2013）. 制备方法对Al2O3/Cu复合材料组织和性能的影响. 《特种铸造及有色合金》.
484. 宋克兴，张亚，张彦敏，赵培峰，王海燕（2013）. 固-液复合法制备铜/锌复合材料研究. 《第八届中国功能材料及其应用学术会议》.
485. 张亚，宋克兴，王青，张彦敏（2013）. 稀土气氛对内氧化法制备铜基复合材料的影响. 《特种铸造及有色合金》.DOI
486. 张彦敏，王国为，宋克兴，李红霞，王青（2013）. 直流电流对Cu-0.86Cr合金电导率及时效速率的影响. 《特种铸造及有色合金》.DOI
487. 宋克兴，张亚，张彦敏（2013）. 固-液复合法制备铜铝复合材料. 《2013广东材料发展论坛——战略性新兴产业发展与新材料科技创新研讨会论文摘要集》.
488. 王庆福，张彦敏，国秀花，宋克兴（2013）. Cu-Mg合金直接内氧化制备MgO/Cu复合材料的组织性能研究. 《2013广东材料发展论坛——战略性新兴产业发展与新材料科技创新研讨会论文摘要集》.
489. 邓猛，贾淑果，宋克兴，张彦敏，罗均，王海龙，王海艳（2013）. Zn-Cu-Ti合金热变形行为的研究. 《2013广东材料发展论坛——战略性新兴产业发展与新材料科技创新研讨会论文摘要集》.
490. 白宁，张彦敏，宋克兴，乔艳艳（2013）. 不同电流密度下时效对Cu-Cr-Zr合金导电性和力学性能的影响. 《2013广东材料发展论坛——战略性新兴产业发展与新材料科技创新研讨会论文摘要集》.
491. 张彦敏，刘卫锋，赵培峰，宋克兴（2013）. 三联体高压隔离开关自力型触指结构优化及成形模具设计. 《塑性工程学报》.
492. 李韶林，宋克兴，国秀花（2013）. SPS法制备Al2O3/Cu复合材料研究. 《粉末冶金技术》.
493. 丁宗业，贾淑果，邓猛，宋克兴，刘平（2013）. Cu-0.36Cr-0.03Zr合金的时效动力学. 《中国有色金属学报》.
494. 王俊峰，贾淑果，陈少华，刘平，宋克兴（2013）. 时效对热轧态Cu-Ni-Si-Mg合金组织和性能的影响. 《材料热处理学报》.
495. 李红霞，宋克兴，张彦敏，国秀花（2013）. SPS法制备弥散强化铜基复合材料的组织和性能. 《热加工工艺》.
496. 国秀花，宋克兴，王旭，赵培峰，张彦敏（2013）. 颗粒增强Cu基复合材料的导电性. 《特种铸造及有色合金》.
497. 王露娟，宋克兴，张彦敏，王青（2013）. 初始直径和拉拔道次对QCr0.5线材组织和性能的影响. 《特种铸造及有色合金》.
498. Xiuhua Guo, Kexing Song, Shuhua Liang, Xu Wang, Yanmin Zhang (2013). Effect of the Thermal Expansion Characteristics of Reinforcements on the Electrical Wear Performance of Copper Matrix Composite. Tribology Transactions.DOI
499. Kexing Song, Yanjun Zhou, Peifeng Zhao, Yanmin Zhang, Ning Bai (2013). Cu-10Sn-4Ni-3Pb alloy prepared by crystallization under pressure: An experimental study. Acta Metallurgica Sinica (English Letters).DOI
500. Zongye Ding, Shuguo Jia, Peifeng Zhao, Meng Deng, Kexing Song (2013). Hot deformation behavior of Cu–0.6Cr–0.03Zr alloy during compression at elevated temperatures. Materials Science and Engineering A.DOI
501. 郜建新，赵培峰，宋克兴，常家富（2012）. 316L不锈钢套筒热挤压工艺研究. 《热加工工艺》.
502. 宋克兴，王露娟，张彦敏，王青（2012）. 内氧化法制备表面弥散强化铜. 《河南科技大学学报(自然科学版)》.
503. 赵培峰，周延军，宋克兴，张彦敏（2012）. 新型耐磨锡青铜合金包套挤压工艺及组织性能(英文). 《塑性工程学报》.
504. 贾淑果，苏娟华，宋克兴，任凤章，刘平（2012）. 接触线用Cu-Ag-Zr-Ce合金的电滑动磨损性能. 《中国有色金属学报》.
505. 王俊峰，贾淑果，陈少华，宋克兴，谢秋风，刘平（2012）. 变形量对Cu-Ni-Si合金再结晶行为的影响. 《河南科技大学学报(自然科学版)》.
506. 王俊峰，贾淑果，陈少华，刘平，宋克兴，刘红勋（2012）. 固溶态Cu-Ni-Si合金时效过程的相变动力学. 《中国有色金属学报》.
507. 高志廷，闫焉服，宋克兴，王淼辉，李永兵（2012）. 不同温度水的冷却特性及45钢的水淬. 《热处理》.
508. 王俊峰，贾淑果，陈少华，刘平，宋克兴（2012）. 热轧态Cu-Ni-Si-Mg合金的时效动力学. 《材料热处理学报》.
509. 邓猛，贾淑果，陈少华，丁宗业，宋克兴（2012）. Cu-2.3Ni-0.5Si-0.22Zn-0.06Mg合金时效性能. 《材料热处理学报》.
510. 王国为，张彦敏，宋克兴，李红霞，王青（2012）. 直流电流下时效对Cu-0.86Cr合金力学性能的影响. 《特种铸造及有色合金》.
511. 王俊峰，贾淑果，陈少华，刘平，宋克兴（2012）. Cu-2.8Ni-0.7Si-0.15Mg合金的时效性能. 《金属热处理》.
512. Xiuhua Guo, Kexing Song, Shuhua Liang, Cuihua Zheng (2012). Thermal expansion behavior of MgO/Cu composite with lower MgO volume fraction. Materials Research Bulletin.DOI
513. 郑翠华，宋克兴，国秀花，李韶林，丁宗业（2011）. 粉末冶金法制备纳米MgO颗粒增强铜基复合材料. 《特种铸造及有色合金》.
514. 宋克兴，国秀花，张永振，王旭，张彦敏（2011）. 表层Cr 2 O 3 弥散强化铜基复合材料电滑动摩擦磨损性能研究. 《2011年全国青年摩擦学与表面工程学术会议论文集》.
515. 国秀花，宋克兴，赵培峰，张永振，张彦敏（2011）. 速度对黄铜/Al 2 O 3 /Cu复合材料载流摩擦副摩擦磨损性能的影响. 《2011年全国青年摩擦学与表面工程学术会议论文集》.
516. 李红霞，王国强，贾淑果，宋克兴（2011）. Ag对Cu-10Fe-0.15Zr原位复合材料微观结构及性能的影响. 《金属热处理》.
517. 宋克兴，张永振，国秀花，郑翠华，周延军，丁宗业，李韶林（2011）. 基于载流摩擦磨损条件下高性能铜基材料的设计与开发. 《中国有色金属学会第十四届材料科学与合金加工学术年会论文集》.
518. 贾淑果，陈少华，宋克兴，刘平，苏娟华（2011）. Cu-0.1Ag-0.26Cr合金的时效析出动力学. 《材料热处理学报》.
519. 周延军，宋克兴，张彦敏，国秀花，郑翠华（2011）. 真空熔铸法制备ZL101A合金工艺及性能研究. 《铸造》.
520. 贾淑果，宋克兴，张应周，刘平（2011）. Cu-Ag-Cr-Ce合金材料载流磨损行为的研究. 《热加工工艺》.
521. 张晓军，闫焉服，宋克兴，张彦敏，王淼辉，周永松（2011）. F2000水基淬火液浓度对其冷却特性曲线及42CrMo钢性能的影响. 《金属热处理》.
522. 贾淑果，刘平，宋克兴，郑茂盛，田保红，周根树（2010）. Cu-Ag-Zr合金的时效性能(英文). 《材料热处理学报》.DOI
523. 贾淑果，刘平，宋克兴，陈讲彪，陈小红，田保红，任凤章（2010）. Cu-Cr-Zr原位复合材料的组织与性能. 《中国有色金属学报》.
524. 王永鹏，宋克兴，王青，张莉（2010）. Cu-Cr合金电滑动摩擦磨损性能研究. 《热加工工艺》.
525. 张莉，宋克兴，张彦敏，李玉林，刘卫锋，王青（2010）. 热变形后时效工艺对Cu-0.92Cr合金组织和性能的影响. 《特种铸造及有色合金》.
526. 刘卫锋，宋克兴，张彦敏，赵培峰，国秀花（2010）. 形变热处理对Cu-1.0Cr合金组织及性能的影响. 《特种铸造及有色合金》.
527. 王青，宋克兴，国秀花，赵培峰，李亚东，郜建新（2009）. Al2O3/Cu复合材料电滑动磨损微观形貌分析. 《特种铸造及有色合金》.
528. 任伟，贾淑果，刘平，宋克兴（2009）. 固溶温度对Cu-Ni-Si合金性能的影响. 《热加工工艺》.
529. 刘敬超，王旭，赵培峰，国秀花，张永振，宋克兴，孙乐民（2009）. 铜基粉末冶金载流摩擦磨损微观形貌分析. 《润滑与密封》.
530. 刘瑞华，宋克兴，贾淑果，郜建新，国秀花，王青（2008）. 铬青铜高温力学性能研究. 《铸造技术》.
531. 赵培峰，宋克兴，国秀花，任广升，沈智，徐春国（2008）. 6061铝合金楔横轧塑性成形显微组织分析. 《特种铸造及有色合金》.
532. 徐晓峰，宋克兴，刘瑞华，国秀花（2008）. 内氧化法制备Al2O3/Cu复合材料电滑动磨损性能的研究. 《摩擦学学报(中英文)》.
533. 徐晓峰，宋克兴，国秀花，刘瑞华（2008）. 载流条件下黄铜/Al2O3/Cu复合材料摩擦副的摩擦磨损性能. 《润滑与密封》.
534. 徐晓峰，上官宝，宋克兴，张永振（2008）. 紫铜/Cu-Cr合金配副载流性能与摩擦性能的关系研究. 《铸造技术》.
535. 刘瑞华，宋克兴，贾淑果，徐晓峰，郜建新，国秀花（2008）. 内氧化制备A12O3/Cu复合材料载流条件下表面磨损形貌和摩擦学性能研究（英文）. Chinese Journal of Aeronautics.
536. 徐晓峰，宋克兴，杜三明（2008）. 载流条件下铜基粉末冶金材料的摩擦磨损行为. 《材料保护》.
537. 夏承东，田保红，刘平，任凤章，宋克兴，刘勇，贾淑果（2007）. 氧化剂对Cu-Al2O3复合材料微观组织的影响. 《特种铸造及有色合金》.
538. 国秀花，宋克兴，郜建新，刘瑞华（2007）. 内氧化法制备Al2O3/Cu复合材料的电蚀特性. 《特种铸造及有色合金》.
539. 夏承东，田保红，刘平，任凤章，宋克兴，刘勇，贾淑果（2007）. 冷变形对简化工艺制备Cu-Al2O3复合材料组织和性能的影响. 《铸造技术》.
540. 刘瑞华，宋克兴，郜建新，贾淑果，国秀花，王青（2007）. 铝合金拉杆的热挤压工艺及模具设计. 《锻压技术》.
541. 刘瑞华，宋克兴，张旸，李振京，郜建新，国秀花（2007）. 电流对黄铜/Al2O3弥散强化铜合金摩擦副摩擦磨损性能的影响. 《润滑与密封》.
542. 夏承东，田保红，刘平，任凤章，宋克兴，刘勇，贾淑果（2007）. Cu-Al合金粉末烧结过程的致密化和内氧化研究. 《材料开发与应用》.
543. 刘瑞华，宋克兴，贾淑果，郜建新，国秀花，李建弘（2007）. Al2O3/Cu复合材料的载流摩擦磨损性能. 《特种铸造及有色合金》.DOI
544. 郜建新，宋克兴，田保红，徐晓峰，李佩泉，国秀花（2007）. 载流条件下Al2O3/Cu复合材料的摩擦磨损特性研究. 《兵器材料科学与工程》.
545. 国秀花，宋克兴，郜建新，刘瑞华（2007）. Cu-Al合金平板试样内氧化层的测定. 《兵器材料科学与工程》.
546. 徐晓峰，宋克兴，国秀花，刘瑞华（2007）. 载流条件下黄铜/Al 2 O 3 /Cu复合材料摩擦副的摩擦磨损性能. 《第八届全国摩擦学大会论文集》.
547. 刘瑞华，宋克兴，郜建新，国秀花，张旸，李振京（2007）. 高压开关铝合金拉杆复合挤压工艺及模具设计. 《模具制造》.
548. 国秀花，宋克兴，郜建新，张晓楠，刘瑞华（2007）. 冷变形对表面弥散强化铜合金组织与性能的影响. 《铸造技术》.
549. Kexing Song, Jianxin Gao, Xiaofeng Xu, Peiquan Li, Baohong Tian, Xiuhua Guo (2007). Kinetic equation for internal oxidation of Cu-Al alloy spheres. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
550. 国秀花，宋克兴，郜建新，王旭，刘瑞华（2006）. 内氧化法制备Al2O3/Cu复合材料的研究现状. 《特种铸造及有色合金》.DOI
551. 郜建新，宋克兴，田保红，徐晓峰，国秀花（2006）. 内氧化法制备Al2O3/Cu点焊电极的装机试验. 《特种铸造及有色合金》.
552. 国秀花，宋克兴，郜建新，林阳明，李红霞（2006）. Al2O3弥散强化铜基复合材料的研究现状与进展. 《材料开发与应用》.
553. 郜建新，徐晓峰，国秀花，田保红，宋克兴（2006）. 内氧化法制备Al2O3/Cu复合材料的载流摩擦磨损特性. 《特种铸造及有色合金》.DOI
554. Baohong Tian, Ping Liu, Kexing Song, Yan Li, Yong Liu, Fengzhang Ren, SU Juan-hua (2006). Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite. Materials Science and Engineering A.DOI
555. 宋克兴，邢建东（2005）. AL 2 O 3 /Cu复合材料的高温拉伸性能研究. 《第三届中国热处理活动周暨第六次全国热处理生产技术改造会议》.
556. 林阳明，宋克兴，李红霞（2005）. Al2O3/Cu复合材料强化机理研究. 《热加工工艺》.
557. 林阳明，宋克兴，郜建新，国秀花（2005）. 内氧化法制备Al2O3／Cu复合材料的性能研究. 《电工材料》.
558. 田保红，刘平，宋克兴，刘勇，任凤章，李炎，董企铭（2005）. 纳米Al2O3pCu复合材料的再结晶微观结构分析. 《材料热处理学报》.DOI
559. 李红霞，田保红，宋克兴，刘平（2005）. 低铝含量Cu-Al合金的表面弥散强化及其性能. 《材料热处理学报》.DOI
560. 李红霞，田保红，宋克兴，刘平（2005）. 内氧化法制备表面弥散强化铜合金的组织与性能. 《兵器材料科学与工程》.
561. 李红霞，田保红，宋克兴，刘平（2004）. 内氧化法制备Al2O3/Cu复合材料. 《兵器材料科学与工程》.
562. 韩胜利，田保红，宋克兴，刘平，董企铭，刘勇，曹先杰，牛立业（2004）. Al2O3弥散强化Cu基复合材料高温拉伸行为研究. 《材料开发与应用》.
563. 韩胜利，田保红，宋克兴，刘勇，刘平，董企铭，曹先杰，娄花芬（2004）. 点焊电极用Al2O3/Cu复合材料性能研究. 《材料开发与应用》.
564. Kexing Song, Jiandong Xing, Qiming Dong, Ping Liu, Baohong Tian, Xianjie Cao (2004). Optimization of the processing parameters during internal oxidation of Cu–Al alloy powders using an artificial neural network. Materials & Design (1980-2015).DOI
565. Kexing Song, Jiandong Xing, Qiming Dong, Ping Liu, Baohong Tian, Xianjie Cao (2004). Internal oxidation of dilute Cu–Al alloy powers with oxidant of Cu2O. Materials Science and Engineering A.DOI
566. 郜建新，宋克兴，李士凯，王观宇（2002）. 2A50铝合金拉杆的反挤压成形工艺研究. 《热加工工艺》.
567. 宋克兴，郜建新，祝要民，刘亚民，辛高伟，黄二明，石伟民（2001）. 中铬耐磨铸钢的开发及其在磨煤机衬板上的应用. 《钢铁研究学报》.
568. 宋克兴，张彦敏，郜建新，方习玲，田进安，王剑锋（1999）. 锻造白口铸铁的强韧化机理. 《钢铁研究学报》.
569. 杨留栓，夏青，刘亚民，杨涤心，宋克兴（1999）. 铝硅钛合金自然沉降除铁工艺. 《河南科技大学学报(自然科学版)》.
570. 宋克兴，卢根基，邵建新，周伯楚，孙爱学，苏明慧，田纪安，方习玲（1998）. 一种新的斗齿用低合金耐磨铸钢. 《工程机械》.
571. Yan-Jun Zhou, Fei Zhou, Ran Yang, Shao-Dan Yang, Jibao Li, Peng-Wei Ren, Zhao-Jie Meng, Ji-dong Chen, Jiang Feng, Kexing Song. Gradient tribolayer and shear-texture substructures synergistically improve dry sliding wear performance of beryllium-free Cu-9Ni-6Sn-0.1Mn alloy. Tribology International.DOI

预印本

1. Feihu Zhao, Jiaxiang Zhang, Xinwen Zhang, Guoshang Zhang, Juan Du, Jiaxin Dong, Shucong Shang, Hongshan San, Kexing Song (2026). Rapid oxidation produces a colored oxide layer on the surface of copper wire while maintaining high conductivity. SSRN Electronic Journal.DOI
2. Junchao Zhang, J. Cao, Sujuan Zhong, Xian Juan Dong, Junhua Guo, Yanjun Zhou, Guoshang Zhang, Kexing Song, Xiaoyu Shen, Huiyi Tang, Xiaohong Yang (2026). Evolution of microstructure and properties of single-crystal/polycrystalline bonding Cu strip during rolling deformation. SSRN Electronic Journal.DOI
3. Ximeng Luo, Tao Huang, Kexing Song, Jiaxiang Zhang, Lili Xiao, Chaomin Zhang, Xiangyun Han, YiZhe Xu, Wenjing Zhang (2026). Research on the influence of rolling deformation on the properties of coated graphene/copper composite flat wire. SSRN Electronic Journal.DOI
4. Weiyang Long, Hongfei Zhang, Xu Wang, Mingzhu You, Zhiyuan Zhu, Jiong Xin Zhao, Jinfeng Han, Xiaohu Zhang, Guoshang Zhang, Wei-Yang Long, Haoran Wu, Pengfei Yue, Shasha Yi, Kaijie Gu, Kexing Song (2026). Effect of Carbide Interface Layer Construction on the Interface Structure and Thermal Conductivity of Diamond/Copper Composites. SSRN Electronic Journal.DOI
5. Zhenhan Zhou, Song Liu, S.J. Li, Kexing Song, Xiuhua Guo, Shuaibin Li, Kaiwen Dong, 白丽珠, Shibo Zhou, Meng Li (2026). Effect of Deformation Path-Controlled Metal Flow and Spatial Particle Arrangement on the Strength-Conductivity Synergy of Al2O3/Cu Composites. SSRN Electronic Journal.DOI
6. Zhenyang Sun, Tao Huang, Kexing Song, Yahui Liu, Aiyun Jiang, Kun Xie, Jiaxiang Zhang, Dong Liu, Aikui Liu, Kexing Song (2025). The influence of temperature and holding time on the element content of tin-copper alloys. SSRN Electronic Journal.DOI
7. Xudong Huang, Rui Tao Qu, Faling Ren, Chao Guo, Yuan Xing, Haotian Ma, Yuwen Lin, Jiaming Liu, Kexing Song, Feng Liu (2024). New Lightweight and Super-Hard Refractory High-Entropy Alloys Developed by a High-Throughput Method. SSRN Electronic Journal.DOI
8. Jun Cao, Yongzhen Sun, Xiaoyu Shen, Kexing Song, Yanjun Zhou, Chengqiang Cui (2024). Study on the Influence of Deformation and Temperature on the Properties of High Strength Tungsten Alloy Wire. SSRN Electronic Journal.DOI
9. Zhenguo Hou, Haitao Liu, Weiqiang Li, Chen Chen, Zihao Zhang, Jincan Dong, Weiwei Lü, Qingling Feng, Bo Jia, Kexing Song (2024). Effect of Trace Sc on Corrosion Behavior of Titanium Material in Cathode Roller for Electrolytic Copper Foil. SSRN Electronic Journal.DOI
10. Jun Cao, Jie Xia, Xiaoyu Shen, Yongzhen Sun, Kexing Song, Yanjun Zhou, Chengqiang Cui (2024). Study on the Effect of Deformation and Temperature on the Properties of Tungsten Alloy Wires. SSRN Electronic Journal.DOI
11. Jun Ci Cao, Chong Li, Yongzhen Sun, Baoan Wu, Huiyi Tang, Xiaoyu Shen, Kexing Song, Yanjun Zhou, Chengqiang Cui (2023). Study on the Effect of Heat Treatment On the Microstructure and Properties of C17300 Beryllium Copper Alloy Microwires. SSRN Electronic Journal.DOI
12. YongHeng Xu, Hongliang Zhao, Yuheng Fan, Zhenyu Hong, Kexing Song, Xianglei Dong, Chunwen Guo (2022). The Effect of Silicon on the Microstructure and Properties of Aged Cu-2.2ni-0.4be Alloy. SSRN Electronic Journal.DOI
13. Yanjun Zhou, Yahui Liu, Kexing Song, Shaolin Li, Cunli Feng, Qianqian Zhu, Xiaowen Peng, Shaodan Yang, Xin Li, Pengfei Zhang (2022). Dual-Mechanism Synergistic Strengthening and Ultra-High Conductivity Regulation Mechanism of Cu-3.5wt.%Ag Alloy Prepared by Different Combined Thermomechanical Treatment Processes. SSRN Electronic Journal.DOI
14. Yanjun Zhou, Jingzhao Yang, Qianqian Zhu, Kexing Song, Xiaowen Peng, Yibo Du, Yahui Liu, Shaodan Yang, Haitao Liu, Chaomin Zhang, Siyu He, Xin Li, Pengfei Zhang (2022). Evolution of Texture and Precipitates Characteristics and High Temperature Softening Mechanism of Cold-Rolled Cu-2.18Fe-0.03P Alloy after Different Annealing. SSRN Electronic Journal.DOI
15. Yang Wang, Hongliang Zhao, Yuheng Fan, Zhenyu Hong, Kexing Song, Xianglei Dong, Chunwen Guo, Song Yang (2022). Designing High Strength and Conductivity Cu Alloys Utilizing Coherent Precipitates. SSRN Electronic Journal.DOI