鲍永杰｜大连海事大学｜学者主页

2026

基于单向降阶高保真代理模型的CFRP机翼力学状态数字孪生研究

王金龙，宣泳辉，冀秀坤，鲍永杰，石泽宇

《机械工程学报》

2026

FMEA/FMECA在船舶工程中的应用综述

王金龙，马宇薪，鲍永杰，冀秀坤

《交通运输工程学报》

DOI

2026

船用碳纤维增强复合材料螺旋桨桨叶铺层结构设计与力学特性研究

冀秀坤，鲍永杰，王金龙，杨宇星，弓永军，贾萌

《中国造船》

2026

热塑性复合材料-金属胶铆混合接头刚度预测模型

张红哲，贾煜鑫，鲍永杰，杨宇星

《吉林大学学报(工学版)》

DOI

2026

Enhanced simplified spring-mass model for stiffness contribution analysis of keyed/adhesive fiber metal laminated joints

Yuxing Yang, Peisong Xu, Jiahui Huang, Yuanjun Tian, Yongjie Bao

Composites Part B Engineering

DOI

2026

Mechanical Performance of Gomphosis‐Type Fiber Metal Laminates With Meso‐Grooved Interlocking Interfaces

Zhen Liu, Yuxing Yang, Yongjie Bao, Peisong Xu, Yongjun Gong

Polymer Composites

DOI

2026

Damage mechanism of fiber metal laminated joint with keyed/adhesive interface based on meso-mechanical interlocking

Yuxing Yang, Jiahui Huang, Peisong Xu, Zhen Liu, Yongjie Bao

Composites Part B Engineering

DOI

2025

热塑性复合材料磨削温度对表面质量影响研究

张红哲，周顺，鲍永杰，陈晨，贾煜鑫，殷国运

《哈尔滨工程大学学报》

2025

Ti/CFRP叠层钻削温度分布数值仿真与分析

陈晨，王爱旭，赵晴，史战立，鲍永杰

《哈尔滨工程大学学报》

2025

低温重油管输温度模拟与管壁-重油界面温升特性分析

鲍永杰，刘欣怡，马宇薪，孙建锐，王金龙

《大连海事大学学报》

DOI

2025

变曲率复合材料螺旋桨叶的赋形几何误差仿真

鲍永杰，张乐强，刘真，冀秀坤，杨宇星

《浙江大学学报(工学版)》

2025

碳纤维增强热塑性复合材料的变温单点飞切去除特性

鲍永杰，殷国运，郑植，杨宇星，陈晨，程东

《浙江大学学报(工学版)》

2025

Longitudinal Ultrasonic Machining System Design and Ultrasonic Milling Process Characteristics of Carbon Fiber Honeycomb Composites

Yongjun Gong, Zhanli Shi, Gaopan Yang, Yongjie Bao

Polymer Composites

DOI

2025

A simulation of thermal coupling characteristics on deep-sea residual oil recovery via pipeline using thermophysical properties

Yongjie Bao, Xinyi Liu, Yuxin Ma, Jianrui Sun, Jinlong Wang, Yongjun Gong

Scientific Reports

DOI

2025

Research on digital twin of three-dimensional reduced order model of marine composite propeller blades based on multisensory fusion

Xiukun Ji, Jinlong Wang, Yongjun Gong, Yongjie Bao, Peng Li

Ocean Engineering

DOI

2025

Experimental and numerical insights on the CFRP propeller: comparative interlaminar mechanical simulation, and strain-time prediction with LSTM neural network

Wang Jinlong, Shi Zeyu, Ji Xiukun, Wang Depeng, Yongjie Bao, Yang Yuxing

Ocean Engineering

DOI

2025

Digital Twin System for Attitude and Stress of Machinery Equipment

Xinyu Wu, Yongjie Bao, Xiukun Ji, Jinlong Wang, Yongjun Gong

International Conference on Applied Mathematics, Modelling and Intelligent Computing (CAMMIC)

DOI

2024

Enhanced dry machinability of honeycomb‐reinforced ablative thermal protection composites by longitudinal ultrasonic‐assisted milling

Zhanli Shi, Zhiyong Yang, Bo Hou, Chen Chen, Yongjie Bao, Yongjun Gong

Polymer Composites

DOI

2024

A stiffness prediction method for variable cross‐section CFRP laminated beam

Yuxing Yang, Zhen Liu, Zhi Guo Zheng, Leqiang Zhang, Yongjie Bao, Chen Chen

Polymer Composites

DOI

2024

Additional study of failure behavior for ship propeller: The comparative analysis of life evaluation approaches between BP neural network, LSTM and TV-HSMM

Jinlong Wang, Sibo Gao, Yongjie Bao, Zeyu Shi, Xiukun Ji

Ocean Engineering

DOI

2024

Experimental study on the mechanical property of carbon fiber reinforced polymer with the combined application of digital twin and reduced order algorithm

Xiukun Ji, Jinlong Wang, Yongjun Gong, Yongjie Bao, Yuxing Yang

Polymer Composites

DOI

2024

Strengthening the bonding interfaces of carbon reinforced aluminum laminate by slot structure

Zhen Liu, Yuxing Yang, Yongjie Bao, Leqiang Zhang, Xiukun Ji, Jinlong Wang

Polymer Composites

DOI

2023

碳纤维增强热塑性复合材料螺旋铣磨制孔损伤研究

张红哲，郑植，殷国运，陈晨，邓成林，鲍永杰

《表面技术》

2023

碳纤维蜂窝复合材料加工表面质量影响研究

鲍永杰，马占鑫，史战立，陈晨

《材料科学与工艺》

2023

低密度填充蜂窝结构复合材料铣削损伤试验研究

张红哲，邓成林，侯博，王金龙，鲍永杰

《工具技术》

2023

Evaluation of the effect of surface roughness parameters on fatigue of TC17 titanium alloy impeller using machine learning algorithm and finite element analysis

Jin-Long Wang, Yu-Xin Ma, Wen-Jie Peng, Yongjie Bao, Ze-Yu Shi

Engineering Failure Analysis

DOI

2023

A thermal conductivity computation model of the carbon fiber reinforced polymer/ aramid fiber reinforced polymer laminate considering the bi‐material composite interfaces

Yongjie Bao, Yu-Xin Ma, Zhikang Zheng, Yu-Xing Yang, Xiukun Ji

Polymer Composites

DOI

2023

Analytical method for assembly-induced deformation prediction of composite bolted joints with assembly gap

Yu-Xing Yang, Yu-Xin Ma, Zhenghao Liu, Yongjie Bao, Jin-long Wang, Chen Chen

Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture

DOI

2023

Correction: Progressive Failure Analysis of Composite/Aluminum Riveted Joints Subjected to Pull-Through Loading

Yu-Xing Yang, Yongjie Bao, Xue-Shu Liu, Jin-long Wang, Feng-Ming Du

Chinese Journal of Mechanical Engineering

DOI

2023

A Study on Drilling of CFRP/Ti Stacks: Temperature Field and Thermal Damage of the Interface Region

Chen Chen, Aixu Wang, Zhikang Zheng, Qing Zhao, Zhanli Shi, Yongjie Bao

Materials

DOI

2022

复合材料螺接力学行为精细化有限元分析方法

杨宇星，鲍永杰，王金龙，杜凤鸣

《机械工程学报》

2022

基于单颗磨粒划切试验的SiCp/Al复合材料表面去除机理研究

张红哲，张旭，朱晓春，鲍永杰

《浙江大学学报(工学版)》

2022

不同体积分数SiCp/Al复合材料单颗磨粒划切仿真与试验研究

张旭，张红哲，鲍永杰

《稀有金属材料与工程》

2022

高体积分数SiCp/Al复合材料超声辅助划切微观去除机理

张红哲，朱晓春，鲍永杰

《表面技术》

2022

Study on the Cutting Damage Mechanism of Aramid Honeycomb Based on the Progressive Damage Model

Yu-Xing Yang, Yongjie Bao, Jin-long Wang, Chen Chen

Materials

DOI

2021

T800级碳纤维复合材料螺旋铣磨制孔工艺研究

张红哲，何文豪，朱晓春，鲍永杰

《工具技术》

2021

SiCp/Al复合材料低损伤加工技术研究进展

鲍永杰，朱晓春，卢守相，张红哲

《稀有金属材料与工程》

2021

Progressive Failure Analysis of Composite/Aluminum Riveted Joints Subjected to Pull-Through Loading

Yu-Xing Yang, Yongjie Bao, Xue-Shu Liu, Jin-long Wang, Feng-Ming Du

Chinese Journal of Mechanical Engineering

DOI

2021

Investigation on the removal characteristics of single-point cutting high-volume fraction SiCp/Al composites

Yongjie Bao, Xu Zhang, Shou-Xiang Lu, Hong-zhe Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2021

Extended spring–mass method for joint stiffness prediction of single-lap multi-bolt composite joints considering assembly gap and gap shimming

Yu-Xing Yang, Yongjie Bao, Jin-long Wang, Feng-Ming Du

Mechanics of Advanced Materials and Structures

DOI

2021

Investigation on damage reduction method by varying cutting angles in the cutting process of rectangular Nomex honeycomb core

Qi-Hao Xu, Yongjie Bao, Yi-Qi Wang, Hang Gao

Journal of Manufacturing Processes

DOI

2021

Embedment Effect on Eliminating Damage of CFRP Pull-riveting Process by Simulation Study

Yi-Qi Wang, Zhi-Bing Cong, G. Xiao, Yongjie Bao, Hang-Shan Gao

DOI

2021

Real-Manufacturing-Process Finite Element Modeling of Aramid Honeycomb for Cutting Mechanism Revealing

Yu-Xing Yang, Yongjie Bao, Qi-Hao Xu, Jin-long Wang

DOI

2020

Mechanism of reduction of damage during helical milling of titanium/CFRP/aluminium stacks

Lei Sun, Hang Gao, Ben-Yu Wang, Yongjie Bao, Ming-Hai Wang, Shujuan Ma

DOI

2019

单向碳纤维/环氧树脂复合材料钻削过程温度场研究（英文）

鲍永杰，王一奇，高航，刘学术，张旖旎

Journal of Central South University

2019

A model for force prediction in grinding holes of SiCp/Al composites

Shou-Xiang Lu, Hang Gao, Yongjie Bao, Qi-Hao Xu

International Journal of Mechanical Sciences

DOI

2019

Formation mechanism of burr defect in aramid fiber composites based on fly-cutting test

Yongjie Bao, Wei Hao, Yi-Qi Wang, Hang Gao, Xue-Shu Liu

The International Journal of Advanced Manufacturing Technology

DOI

2019

The effect of shimming material on flexural behavior for composite joints with assembly gap

Yu-Xing Yang, Yi-Qi Wang, Xue-Shu Liu, Hang Gao, Yongjie Bao

Composite structures

DOI

2019

Optimization of the Hot Pressing Process for Preparing Flax Fiber/PE Thermoplastic Composite

Yi-Qi Wang, Guangpeng Cui, Zhu-Bao Shao, Yongjie Bao, Hang Gao

Mechanical Engineering Science

DOI

2019

Investigation on temperature field of unidirectional carbon fiber/epoxy composites during drilling process

Yongjie Bao, Yi-Qi Wang, Hang Gao, Xue-Shu Liu, Yi-Ni Zhang

Journal of Central South University

DOI

2018

低刚度约束下复合材料螺旋铣磨制孔

高航，姚舜铭，鲍永杰，刘旭超

《金刚石与磨料磨具工程》

2018

垂直度误差影响复合材料层合板层间应力分析

刘学术，杨宇星，鲍永杰，高航，李汝鹏

《机械科学与技术》

2018

An enhanced spring-mass model for stiffness prediction in single-lap composite joints with considering assembly gap and gap shimming

Yu-Xing Yang, Xue-Shu Liu, Yi-Qi Wang, Hang Gao, Yongjie Bao, Ru-Peng Li

DOI

2018

Numerical and experimental investigations on temperature distribution of plain-woven aramid fiber-reinforced plastics composites with low-mild spindle velocities

Yongjie Bao, Wei Hao, Hang Gao, Xue-Shu Liu, Yi-Qi Wang

The International Journal of Advanced Manufacturing Technology

DOI

2018

Effects of Hole Perpendicularity Error on Load Distribution in Single-Lap Double-Bolt Composite Joints

Ru-Peng Li, Ruiheng Xiao, En-De Ge, Hang Gao, Yongjie Bao, Xue-Shu Liu

2018

Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis

Yi-Qi Wang, P. Cheng, X.-S. Liu, Yongjie Bao, H. Gao

Strength of Materials

DOI

2018

Evaluation of Assembly Gap from 3D Laser Measurements via FEA Simulation

Xue-Shu Liu, Junhao Chang, Yu-Xing Yang, Yi-Qi Wang, Yongjie Bao, Hang Gao

International Journal of Aerospace Engineering

DOI

2017

A methodology for helical mill-grinding of tiny internal threads made of hard brittle materials

Hang Gao, Shou-Xiang Lu, A. Yang, Yongjie Bao

DOI

2017

A progressive damage model for predicting damage evolution of laminated composites subjected to three-point bending

Yu-Xing Yang, Xue-Shu Liu, Yi-Qi Wang, Hang Gao, Ru-Peng Li, Yongjie Bao

DOI

2017

Effects of Hole Perpendicularity Error on Mechanical Performance of Single-Lap Double-Bolt Composite Joints

Xue-Shu Liu, Yu-Xing Yang, Yi-Qi Wang, Yongjie Bao, Hang Gao

DOI

2017

Effects of Hole-Perpendicularity Error on Joint Stiffness of Single-Lap Double-Bolt Composite Joints

Xue-Shu Liu, Yu-Xing Yang, Gao Hang, Yongjie Bao, Ru-Peng Li, Lei Chen

2016

Experimental Study on Ultrasonic Vibration-Assisted Grinding of High Volume Fraction SiCp/Al Composites Micro-Hole

Shou-Xiang Lu, Hang Gao, Chao Sun, Yongjie Bao, Zi-Cheng Bao

DOI

2016

Temperature Field Study of Hole Drilling in Kevlar Composites

Yongjie Bao, Yi-Ni Zhang, Hang Gao, Xue-Shu Liu

DOI

2014

SiCp/Al复合材料制孔崩边缺陷及其评价方法

曹波，高航，鲍永杰，鲍子成，陈广华

《复合材料学报》

2014

Blind Hole Machining of Quartz Fiber Reinforced Ceramic Matrix Composites by Helical Milling with Electroplated Diamond Tool

Hang Gao, Tong-Feng Zhao, Yongjie Bao, Chao Sun, Shou-Xiang Lu

DOI

2013

碳纤维/环氧树脂复合材料钻削温度场建模与试验

鲍永杰，高航，梁延德，朱国平

《兵工学报》

2013

SiCp/Al复合材料低损伤磨削制孔工艺研究

鲍永杰，曹波，李兰柱，高航

《宇航材料工艺》

2013

Effect of Fiber Directions on the Surface Quality of Milling C/SiC Composites

Yongjie Bao, Min-Zhi Bi, Hang Gao, Bo Cao

DOI

2012

Study on Friction Coefficient between Carbon/Epoxy Composites and a Monocrystalline Diamond under Different Temperatures

Ben-Yu Wang, Hang Gao, Song-Peng Zhang, Yongjie Bao

DOI

2012

One kind of brittle materials grinding wheel forming the threaded holes

Hang Gao, Dongming Guo, An-Qiang Yang, Yongjie Bao, Bo Cao, Jun-Liang Huang

2012

Prediction of the cutting forces generated in the drilling of carbon-fibre-reinforced plastic composites using a twist drill

Dongming Guo, Q. Wen, Hang Gao, Yongjie Bao

DOI

2012

Research on Temperature Field Model during Grinding-drilling of Unidirectional Carbon/epoxy Composites

Yongjie Bao

DOI

2012

Research on the Drilling Temperature Field Model of the Unidirectional Carbon Fiber Epoxy Composites

Guo-Ping Zhu, Yongjie Bao, Hang Gao

DOI

2012

Molding grinding wheel for grinding small-hole threads of hard and brittle materials

Hang Gao, Dongming Guo, An-Qiang Yang, Yongjie Bao, Bo Cao, Jun-Liang Huang

2011

磨削热对碳纤维复合材料表面质量影响研究

鲍永杰，高航，马海龙，李伟

《大连理工大学学报》

2011

电镀金刚石刀具钻削碳纤维复合材料磨粒磨损特征研究

高航，刘国兴，张选龙，鲍永杰

《大连理工大学学报》

2011

A study of drilling uni-directional carbon/epoxy composites

Huixuan Gao, Yongjie Bao, Z.-M. Feng

DOI

2011

Research on abrasive wear characteristics of electroplated diamond tool during drilling carbon fiber reinforced plastics

Yongjie Bao

2010

航空碳纤维复合材料构件无缺陷制孔方法的研究

冯子明，欧阳，鲍永杰，高航

《航空制造技术》

2010

C/E复合材料“以磨代钻”制孔工艺

鲍永杰，高航，董波，李兰柱

《宇航材料工艺》

2010

C/E复合材料制孔缺陷成因与高效制孔技术

鲍永杰

《大连理工大学》

2010

Theoretical Analysis of Grinding Temperature Field for Carbon Fiber Reinforced Plastics

Hang Gao, H.-L. Ma, Yongjie Bao, H.-P. Yuan, R. Kang

DOI

2009

碳纤维复合材料构件加工缺陷与高效加工对策

鲍永杰，高航

《材料工程》

2009

电镀金刚石钻头钻削碳纤维复合材料研究

鲍永杰，高航，李凤全

《金刚石与磨料磨具工程》

2008

Grinding of Carbon/Epoxy Composites Using Electroplated CBN Wheel with Controlled Abrasive Clusters

H.-P. Yuan, Hang Gao, Yongjie Bao, Yong Wu

DOI

2008

Disfigurement formation and control in drilling carbon fibre reinforced composites

Zhu-Ji Jin, Yongjie Bao, Hang Gao

DOI

2007

Studies on Disfigurement-Fee Technology of Drilling Carbon Fiber Reinforced Plastics

Yongqing Wang, Yongjie Bao, Hang Gao

DOI

2006

碳纤维增强复合材料钻削的若干研究

鲍永杰

《大连理工大学》

2006

Drilling/grinding integrated combined tool

Hang Gao, Dongming Guo, Yongjie Bao, R. Kang, Zhu-Ji Jin

精选作品

期刊论文

基于单向降阶高保真代理模型的CFRP机翼力学状态数字孪生研究

FMEA/FMECA在船舶工程中的应用综述

船用碳纤维增强复合材料螺旋桨桨叶铺层结构设计与力学特性研究

热塑性复合材料-金属胶铆混合接头刚度预测模型

Enhanced simplified spring-mass model for stiffness contribution analysis of keyed/adhesive fiber metal laminated joints

Mechanical Performance of Gomphosis‐Type Fiber Metal Laminates With Meso‐Grooved Interlocking Interfaces

Damage mechanism of fiber metal laminated joint with keyed/adhesive interface based on meso-mechanical interlocking

热塑性复合材料磨削温度对表面质量影响研究

Ti/CFRP叠层钻削温度分布数值仿真与分析

低温重油管输温度模拟与管壁-重油界面温升特性分析

变曲率复合材料螺旋桨叶的赋形几何误差仿真

碳纤维增强热塑性复合材料的变温单点飞切去除特性

Longitudinal Ultrasonic Machining System Design and Ultrasonic Milling Process Characteristics of Carbon Fiber Honeycomb Composites

A simulation of thermal coupling characteristics on deep-sea residual oil recovery via pipeline using thermophysical properties

Research on digital twin of three-dimensional reduced order model of marine composite propeller blades based on multisensory fusion

Experimental and numerical insights on the CFRP propeller: comparative interlaminar mechanical simulation, and strain-time prediction with LSTM neural network

Digital Twin System for Attitude and Stress of Machinery Equipment

Enhanced dry machinability of honeycomb‐reinforced ablative thermal protection composites by longitudinal ultrasonic‐assisted milling

A stiffness prediction method for variable cross‐section CFRP laminated beam

Additional study of failure behavior for ship propeller: The comparative analysis of life evaluation approaches between BP neural network, LSTM and TV-HSMM

Experimental study on the mechanical property of carbon fiber reinforced polymer with the combined application of digital twin and reduced order algorithm

Strengthening the bonding interfaces of carbon reinforced aluminum laminate by slot structure

碳纤维增强热塑性复合材料螺旋铣磨制孔损伤研究

碳纤维蜂窝复合材料加工表面质量影响研究

低密度填充蜂窝结构复合材料铣削损伤试验研究

Evaluation of the effect of surface roughness parameters on fatigue of TC17 titanium alloy impeller using machine learning algorithm and finite element analysis

A thermal conductivity computation model of the carbon fiber reinforced polymer/ aramid fiber reinforced polymer laminate considering the bi‐material composite interfaces

Analytical method for assembly-induced deformation prediction of composite bolted joints with assembly gap

Correction: Progressive Failure Analysis of Composite/Aluminum Riveted Joints Subjected to Pull-Through Loading

A Study on Drilling of CFRP/Ti Stacks: Temperature Field and Thermal Damage of the Interface Region

复合材料螺接力学行为精细化有限元分析方法

基于单颗磨粒划切试验的SiCp/Al复合材料表面去除机理研究

不同体积分数SiCp/Al复合材料单颗磨粒划切仿真与试验研究

高体积分数SiCp/Al复合材料超声辅助划切微观去除机理

Study on the Cutting Damage Mechanism of Aramid Honeycomb Based on the Progressive Damage Model

T800级碳纤维复合材料螺旋铣磨制孔工艺研究

SiCp/Al复合材料低损伤加工技术研究进展

Progressive Failure Analysis of Composite/Aluminum Riveted Joints Subjected to Pull-Through Loading

Investigation on the removal characteristics of single-point cutting high-volume fraction SiCp/Al composites

Extended spring–mass method for joint stiffness prediction of single-lap multi-bolt composite joints considering assembly gap and gap shimming

Investigation on damage reduction method by varying cutting angles in the cutting process of rectangular Nomex honeycomb core

Embedment Effect on Eliminating Damage of CFRP Pull-riveting Process by Simulation Study

Real-Manufacturing-Process Finite Element Modeling of Aramid Honeycomb for Cutting Mechanism Revealing

Mechanism of reduction of damage during helical milling of titanium/CFRP/aluminium stacks

单向碳纤维/环氧树脂复合材料钻削过程温度场研究（英文）

A model for force prediction in grinding holes of SiCp/Al composites

Formation mechanism of burr defect in aramid fiber composites based on fly-cutting test

The effect of shimming material on flexural behavior for composite joints with assembly gap

Optimization of the Hot Pressing Process for Preparing Flax Fiber/PE Thermoplastic Composite

Investigation on temperature field of unidirectional carbon fiber/epoxy composites during drilling process

低刚度约束下复合材料螺旋铣磨制孔

垂直度误差影响复合材料层合板层间应力分析

An enhanced spring-mass model for stiffness prediction in single-lap composite joints with considering assembly gap and gap shimming

Numerical and experimental investigations on temperature distribution of plain-woven aramid fiber-reinforced plastics composites with low-mild spindle velocities

Effects of Hole Perpendicularity Error on Load Distribution in Single-Lap Double-Bolt Composite Joints

Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis

Evaluation of Assembly Gap from 3D Laser Measurements via FEA Simulation

A methodology for helical mill-grinding of tiny internal threads made of hard brittle materials

A progressive damage model for predicting damage evolution of laminated composites subjected to three-point bending

Effects of Hole Perpendicularity Error on Mechanical Performance of Single-Lap Double-Bolt Composite Joints

Effects of Hole-Perpendicularity Error on Joint Stiffness of Single-Lap Double-Bolt Composite Joints

Experimental Study on Ultrasonic Vibration-Assisted Grinding of High Volume Fraction SiCp/Al Composites Micro-Hole

Temperature Field Study of Hole Drilling in Kevlar Composites

SiCp/Al复合材料制孔崩边缺陷及其评价方法

Blind Hole Machining of Quartz Fiber Reinforced Ceramic Matrix Composites by Helical Milling with Electroplated Diamond Tool

碳纤维/环氧树脂复合材料钻削温度场建模与试验

SiCp/Al复合材料低损伤磨削制孔工艺研究

Effect of Fiber Directions on the Surface Quality of Milling C/SiC Composites

Study on Friction Coefficient between Carbon/Epoxy Composites and a Monocrystalline Diamond under Different Temperatures

One kind of brittle materials grinding wheel forming the threaded holes

Prediction of the cutting forces generated in the drilling of carbon-fibre-reinforced plastic composites using a twist drill

Research on Temperature Field Model during Grinding-drilling of Unidirectional Carbon/epoxy Composites

Research on the Drilling Temperature Field Model of the Unidirectional Carbon Fiber Epoxy Composites

Molding grinding wheel for grinding small-hole threads of hard and brittle materials

磨削热对碳纤维复合材料表面质量影响研究

电镀金刚石刀具钻削碳纤维复合材料磨粒磨损特征研究

A study of drilling uni-directional carbon/epoxy composites

Research on abrasive wear characteristics of electroplated diamond tool during drilling carbon fiber reinforced plastics