周为明｜福建师范大学｜学者主页

2026

AGMSt对PLA流变性能和结晶性能的影响

陈婷，张青海，曹长林，周为明，王小君，汪扬涛，卢鑫

《塑料》

2026

废纺织物预处理工艺对纤维增强回收塑料结构与性能的影响

徐龙，吴伟强，杨松伟，周为明，曹长林，谢一督，杨艺林，陈庆华，钱庆荣

《再生资源与循环经济》

2026

基于数值模拟单螺杆挤出机加热方式与螺杆设计优化研究

吴伟强，杨松伟，周为明，曹长林，陈庆华，钱庆荣

《橡塑技术与装备》

DOI

2026

Fused deposition modelling 3D printing incorporates BiOCl morphology regulation as a strategy for developing bespoke photocatalytic reactor

Changlin Cao, Xinshu Xia, Liangbin Lin, Songwei Yang, Yong Li, Weiming Zhou, Lihong Xu, Q. Chen, Qingrong Qian

Journal of Environmental Management

DOI

2026

Closed-loop recycling of waste ultra-high molecular weight polyethylene via inducing melt fracture coupled with solid-state shear milling

Kun Wang, Changlin Cao, Xiaochuan Chen, Qingrong Qian, Weiming Zhou, Songwei Yang, Qinghua Chen

Waste Management

DOI

2026

Polydopamine enhances the photocatalytic performance of a BiOBr-loaded 3D-printed monolithic photoreactor by fused deposition modeling

Fengrui Wu, Yong Li, Wenliang Wu, Z. C. Zhang, Liangbin Lin, Songwei Yang, Lihong Xu, Xinshu Xia, Weiming Zhou, Changlin Cao, Liren Xiao

RSC Advances

DOI

2026

Integrated hydrothermal and photocatalytic strategy for PET microplastic conversion and waste valorization

Liangbin Lin, Huizhen Lin, Jiawei Huang, Luteng Luo, Qinyun Qiu, Wenxiu Wu, Zhipeng Zhang, Hao Xue, Bingqi Jiang, Qingrong Qian, Qinghua Chen, Changlin Cao, Weiming Zhou

Chemical Engineering Journal

DOI

2025

Surface hydroxyl-rich BiOCl/TiO2 and microwave pretreatment synergistically promote photocatalytic degradation of high density polyethylene microplastics

Changlin Cao, Liangbin Lin, Qinyun Qiu, Jiaming Wang, Huizhen Lin, Qingrong Qian, Qinghua Chen, Weiming Zhou

Journal of Colloid and Interface Science

DOI

2025

Identification of Aged Polypropylene with Machine Learning and Near–Infrared Spectroscopy for Improved Recycling

Keyu Zhu, Delong Wu, Songwei Yang, Changlin Cao, Weiming Zhou, Qingrong Qian, Qinghua Chen

Polymers

DOI

2025

In situ modification of bismuth oxyhalide photocatalysts with natural chlorophyll for enhanced photocatalytic performance

Yan Li, Liangbin Lin, Fengrui Wu, Lihong Xu, Yi Zhang, Xinshu Xia, Changlin Cao, Weiming Zhou, Liren Xiao, Qingrong Qian, Qinghua Chen

RSC Advances

DOI

2025

Fabrication of Highly‐Filled Waste PET Fiber/ PE Composites With Superior Fiber Length Retention and Enhanced Properties Using Short Mixing‐Section Elliptical Rotors in a Twin‐Rotor Continuous Mixer

Le Xu, Z.H. Pan, Songwei Yang, Changlin Cao, Yufeng Wu, Weiming Zhou, Yidu Xie, Yilin Yang, Qingrong Qian, Qinghua Chen

Polymer Engineering and Science

DOI

2024

基于光催化降解的微塑料污染治理研究进展

林良斌，周为明，薛珲，钱庆荣，杨松伟，曹长林，陈庆华

《中国塑料》

2024

Enhancing Microplastic Degradation through Synergistic Photocatalytic and Pretreatment Approaches

Liangbin Lin, Jiayu Yi, Jiaming Wang, Qingrong Qian, Qinghua Chen, Changlin Cao, Weiming Zhou

Langmuir

DOI

2024

Highly Filled Waste Polyester Fiber/Low-Density Polyethylene Composites with a Better Fiber Length Retention Fabricated by a Two-Rotor Continuous Mixer

Junrong Chen, Z.H. Pan, Songwei Yang, Changlin Cao, Weiming Zhou, Yidu Xie, Yilin Yang, Qingrong Qian, Qinghua Chen

Polymers

DOI

2024

Solvent-free blending of CsPbBr3 and commercial polymer: Interface-visualization, bandgap engineering and improved stability in 3D printing

Zhen Liu, Xinshu Xia, Siyu Xu, Yanan Wu, liren Xiao, Changlin Cao, Qinghua Chen, Weiming Zhou, Xiaoli Sun, Ke‐Zhao Du

Chemical Engineering Journal

DOI

2024

Impact of functional groups on cellulose nanofibers on the state of water molecules, photocatalytic water splitting, and photothermal water evaporation

Weiming Zhou, Hongqiang Huang, Zequn Wang, Swellam Wafa Sharshir, Chong Wang, Meng An, Liwei Wang, Zhanhui Yuan

Journal of Materials Chemistry A

DOI

2024

Pt anchored in the skeleton of rice husk-based ZSM-5 for excellent catalytic VOC oxidation: structure–activity relationship and environmental impact assessment

Wenxin Lan, Muping Shen, Yinye Chen, Kui Niu, Weiming Zhou, Jing Xu, Baoquan Huang, Hongjie Cai, Jiachang Zuo, Daifeng Lin, Yongjin Luo, Qingrong Qian, Qinghua Chen

Green Chemistry

DOI

2024

Application of 3D printing technology for green synthesis of Fe 2 O 3 using ABS/TPU/chlorella skeletons for methyl orange removal

Dingyong Liu, Hongjie Cai, Weiming Zhou, Dandan Lei, Changlin Cao, Xinshu Xia, Liren Xiao, Qingrong Qian, Qinghua Chen

RSC Advances

DOI

2024

Chlorella filled poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) blend bio-composites compatible with additive manufacturing processes: Fluorescent and anti-counterfeiting QR codes applications

Xinshu Xia, Yan Li, Zhen Liu, Songwei Yang, Changlin Cao, Weiming Zhou, Qinghua Chen, Liren Xiao, Qingrong Qian

International Journal of Biological Macromolecules

DOI

2023

纤维素/氯氧化铋二维层状膜的构建及其光催化析氢机制的研究

周为明

《福建农林大学》

2022

研究生全英文课程教学改革与实践——以“材料科学与工程概论”课程为例

袁占辉，周为明，Ibrahim Lawan

《教育教学论坛》

2019

[Review] An overview of chlorophenols as contaminants and their removal from wastewater by adsorption: A review

Zaharaddeen N. Garba, Weiming Zhou, Ibrahim Lawan, Wei Xiao, Mingxi Zhang, Liwei Wang, Lihui Chen, Zhanhui Yuan

Journal Of Environmental Management，Vol. 2410

DOI

2017

Filler-induced heterogeneous distribution of stretch-induced crystallization in natural rubber: An in-situ synchrotron-radiation micro-focused scanning X-ray diffraction study

Liang Chen, Weiming Zhou, Fengmei Su, Wen-Hua Zhang, Pin-Zhang Chen, You-Xin Ji, Liangbin Li

DOI

2015

中国再生塑料产业高值化利用技术方向与创新发展模式探讨

叶海华，周为明，陈潇川，杨松伟，陈庆华

《中国石油和化工产业观察》

2015

Inducing uniform single-crystal like orientation in natural rubber with constrained uniaxial stretch.

Weiming Zhou, L. Meng, Jie Lu, Zhen Wang, Wen-Hua Zhang, Ning-Dong Huang, Liang Chen, Liangbin Li

Soft Matter

DOI

2015

Synthesis of recyclable, chemically cross-linked, high toughness, high conductivity ion gels by sequential triblock copolymer self-assembly and disulfide bond cross-linking

Cheng-Sha Wei, Ming-Ming Chen, Dong Liu, Weiming Zhou, Majid Khan, Xi-Bo Wu, Ning-Dong Huang, Liangbin Li

DOI

2015

The spatial correlation between crystalline and amorphous orientations of isotactic polypropylene during plastic deformation: An in situ observation with FTIR imaging

Wei Chen, Xiangyang Li, Yan-Ping Liu, J. Li, Weiming Zhou, Liang Chen, Liangbin Li

Chinese Journal of Polymer Science

DOI

2015

A recyclable disulfide bond chemically cross-linking, high toughness, high conductivity ion gel based on re-shaping and restructuring in the gel state

Cheng-Sha Wei, Ming-Ming Chen, Dong Liu, Weiming Zhou, Majid Khan, Xi-Bo Wu, Ning-Dong Huang, Liangbin Li

DOI

2015

Unveiling Reinforcement and Toughening Mechanism of Filler Network in Natural Rubber with Synchrotron Radiation X-ray Nano-Computed Tomography

Liang Chen, Weiming Zhou, Jie Lu, Jing Li, Wen-Hua Zhang, Ning-Dong Huang, Li-Hui Wu, Liangbin Li

DOI

2014

镨掺杂钛酸钙/云母钛荧光效果珠光颜料的制备及其性能研究

周为明，陈庆华，柯梅珍，吴楠，罗永晋，张华集，钱庆荣

《无机材料学报》

2014

氧化铁包覆云母对聚对苯二甲酸乙二醇酯非等温结晶动力学的影响

林新土，陈庆华，钱庆荣，周为明，黄巧玲，许丽洪，曾晓强，张华集

《中国塑料》

2014

荧光效果珠光颜料的制备及其在油墨中的应用研究

周为明

《福建师范大学》

2014

超声波辅助分散法制备镨掺杂钛酸钙荧光效果珠光颜料

周为明，张华集，吴楠，柯梅珍，袁占辉，陈庆华，罗永晋，钱庆荣

《发光学报》

2014

Imaging the strain induced carbon black filler network structure breakage with nano X-ray tomography

Weiming Zhou, Liang Chen, Jie Lu, Z. Qi, Ning-Dong Huang, Liangbin Li, Wanxia Huang

DOI

2014

In Situ microscopic infrared imaging study on deformation‐induced spatial orientation and phase transition distributions of PA12

Liang Chen, Wei Chen, Weiming Zhou, J. Li, Yan-Ping Liu, Z. Qi, Liangbin Li

DOI

2014

In-situ FTIR imaging on the plastic deformation of iPP thin films

Li Jing, Hai-Long Li, L. Meng, Xiangyang Li, Liang Chen, Wei Chen, Weiming Zhou, Z. Qi, Liangbin Li

DOI

2014

Flow-Induced Precursors of Isotactic Polypropylene: An in Situ Time and Space Resolved Study with Synchrotron Radiation Scanning X-ray Microdiffraction

Fengmei Su, Weiming Zhou, Xiangyang Li, You-Xin Ji, Kun-Peng Cui, Z. Qi, Liangbin Li

DOI

2014

Toughening mystery of natural rubber deciphered by double network incorporating hierarchical structures

Weiming Zhou, Xiangyang Li, Jie Lu, Ning-Dong Huang, Liang Chen, Z. Qi, Liangbin Li, Hai-Yi Liang

Scientific Reports

DOI

2014

Melt rheology and properties of compatibilized recycled poly(ethylene terephthalate)/(styrene‐ethylene‐ethylene‐propylene‐styrene) block copolymer blends

Xintu Lin, Qingrong Qian, Liren Xiao, Qiaoling Huang, Weiming Zhou, Qinghua Chen, Huaji Zhang

Journal of Vinyl and Additive Technology

DOI

2013

珠光颜料的研究及应用进展

周为明，柯梅珍，吴楠，袁占辉，钱庆荣，黄宝铨，陈庆华

《印染》

2013

回收PET增韧改性研究进展

林新土，张华集，黄巧玲，周为明，陈庆华

《工程塑料应用》

2013

Direct Formation of Isotactic Poly(1-butene) Form I Crystal from Memorized Ordered Melt

Fengmei Su, Xiangyang Li, Weiming Zhou, Shan-Shan Zhu, You-Xin Ji, Zhen Wang, Z. Qi, Liangbin Li

DOI

2013

Accelerating crystal–crystal transition in poly(1-butene) with two-step crystallization: An in-situ microscopic infrared imaging and microbeam X-ray diffraction study

Fengmei Su, Xiangyang Li, Weiming Zhou, Wei Chen, Hai-Long Li, Yuanhua Cong, Zhihua Hong, Z. Qi, Liangbin Li

DOI

2013

Deformation-induced crystal–crystal transition of polybutene-1: an in situ FTIR imaging study

Wei Chen, Xiangyang Li, Hai-Long Li, Fengmei Su, Weiming Zhou, Liangbin Li

Journal of Materials Science

DOI

2013

Spatial distribution of crystal orientation in neck propagation: An in-situ microscopic infrared imaging study on polyethylene

Hai-Long Li, Weiming Zhou, You-Xin Ji, Zhihua Hong, B. Miao, Xiangyang Li, Jing Zhang, Z. Qi, Xiao Wang, Liangbin Li, Zhong-Ming Li

DOI

2012

Studying deformation behavior of a single spherulite with in-situ infrared microspectroscopic imaging

Zhihua Hong, Yuanhua Cong, Z. Qi, Hai-Long Li, Weiming Zhou, Wei Chen, Xiao Wang, Yingui Zhou, Liangbin Li

DOI

2012

Conformational Ordering on the Growth Front of Isotactic Polypropylene Spherulite

Yuanhua Cong, Zhihua Hong, Weiming Zhou, Wei Chen, Fengmei Su, Hai-Long Li, Xiangyang Li, Kehua Yang, Xiaohan Yu, Z. Qi, Liangbin Li

DOI

2010

Conformational Ordering in Growing Spherulites of Isotactic Polypropylene

Yuanhua Cong, Zhihua Hong, Z. Qi, Weiming Zhou, Hai-Long Li, Hao Liu, Wei Chen, Xiao Wang, Liangbin Li

DOI

精选作品

期刊论文

AGMSt对PLA流变性能和结晶性能的影响

废纺织物预处理工艺对纤维增强回收塑料结构与性能的影响

基于数值模拟单螺杆挤出机加热方式与螺杆设计优化研究

Fused deposition modelling 3D printing incorporates BiOCl morphology regulation as a strategy for developing bespoke photocatalytic reactor

Closed-loop recycling of waste ultra-high molecular weight polyethylene via inducing melt fracture coupled with solid-state shear milling

Polydopamine enhances the photocatalytic performance of a BiOBr-loaded 3D-printed monolithic photoreactor by fused deposition modeling

Integrated hydrothermal and photocatalytic strategy for PET microplastic conversion and waste valorization

Surface hydroxyl-rich BiOCl/TiO2 and microwave pretreatment synergistically promote photocatalytic degradation of high density polyethylene microplastics

Identification of Aged Polypropylene with Machine Learning and Near–Infrared Spectroscopy for Improved Recycling

In situ modification of bismuth oxyhalide photocatalysts with natural chlorophyll for enhanced photocatalytic performance

Fabrication of Highly‐Filled Waste PET Fiber/ PE Composites With Superior Fiber Length Retention and Enhanced Properties Using Short Mixing‐Section Elliptical Rotors in a Twin‐Rotor Continuous Mixer

基于光催化降解的微塑料污染治理研究进展

Enhancing Microplastic Degradation through Synergistic Photocatalytic and Pretreatment Approaches

Highly Filled Waste Polyester Fiber/Low-Density Polyethylene Composites with a Better Fiber Length Retention Fabricated by a Two-Rotor Continuous Mixer

Solvent-free blending of CsPbBr3 and commercial polymer: Interface-visualization, bandgap engineering and improved stability in 3D printing

Impact of functional groups on cellulose nanofibers on the state of water molecules, photocatalytic water splitting, and photothermal water evaporation

Pt anchored in the skeleton of rice husk-based ZSM-5 for excellent catalytic VOC oxidation: structure–activity relationship and environmental impact assessment

Application of 3D printing technology for green synthesis of Fe 2 O 3 using ABS/TPU/chlorella skeletons for methyl orange removal

Chlorella filled poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) blend bio-composites compatible with additive manufacturing processes: Fluorescent and anti-counterfeiting QR codes applications

纤维素/氯氧化铋二维层状膜的构建及其光催化析氢机制的研究

研究生全英文课程教学改革与实践——以“材料科学与工程概论”课程为例

[Review] An overview of chlorophenols as contaminants and their removal from wastewater by adsorption: A review

Filler-induced heterogeneous distribution of stretch-induced crystallization in natural rubber: An in-situ synchrotron-radiation micro-focused scanning X-ray diffraction study

中国再生塑料产业高值化利用技术方向与创新发展模式探讨

Inducing uniform single-crystal like orientation in natural rubber with constrained uniaxial stretch.

Synthesis of recyclable, chemically cross-linked, high toughness, high conductivity ion gels by sequential triblock copolymer self-assembly and disulfide bond cross-linking

The spatial correlation between crystalline and amorphous orientations of isotactic polypropylene during plastic deformation: An in situ observation with FTIR imaging

A recyclable disulfide bond chemically cross-linking, high toughness, high conductivity ion gel based on re-shaping and restructuring in the gel state

Unveiling Reinforcement and Toughening Mechanism of Filler Network in Natural Rubber with Synchrotron Radiation X-ray Nano-Computed Tomography

镨掺杂钛酸钙/云母钛荧光效果珠光颜料的制备及其性能研究

氧化铁包覆云母对聚对苯二甲酸乙二醇酯非等温结晶动力学的影响

荧光效果珠光颜料的制备及其在油墨中的应用研究

超声波辅助分散法制备镨掺杂钛酸钙荧光效果珠光颜料

Imaging the strain induced carbon black filler network structure breakage with nano X-ray tomography

In Situ microscopic infrared imaging study on deformation‐induced spatial orientation and phase transition distributions of PA12

In-situ FTIR imaging on the plastic deformation of iPP thin films

Flow-Induced Precursors of Isotactic Polypropylene: An in Situ Time and Space Resolved Study with Synchrotron Radiation Scanning X-ray Microdiffraction

Toughening mystery of natural rubber deciphered by double network incorporating hierarchical structures

Melt rheology and properties of compatibilized recycled poly(ethylene terephthalate)/(styrene‐ethylene‐ethylene‐propylene‐styrene) block copolymer blends

珠光颜料的研究及应用进展

回收PET增韧改性研究进展

Direct Formation of Isotactic Poly(1-butene) Form I Crystal from Memorized Ordered Melt

Accelerating crystal–crystal transition in poly(1-butene) with two-step crystallization: An in-situ microscopic infrared imaging and microbeam X-ray diffraction study

Deformation-induced crystal–crystal transition of polybutene-1: an in situ FTIR imaging study

Spatial distribution of crystal orientation in neck propagation: An in-situ microscopic infrared imaging study on polyethylene

Studying deformation behavior of a single spherulite with in-situ infrared microspectroscopic imaging

Conformational Ordering on the Growth Front of Isotactic Polypropylene Spherulite

Conformational Ordering in Growing Spherulites of Isotactic Polypropylene

会议论文

The energy dissipation mechanisms of filler network evolutions under cyclic loading by X-ray Nano-CT

研究方向