张培磊｜上海工程技术大学｜学者主页

2026

Inconel 718高温合金激光焊接组织与元素分布特征

雍学超，苟星禄，夏淦，张培磊

《材料科学与工程学报》

2026

任元昊，吴頔，侯泽恺，张路，刘源，董金枋，张培磊

《中国激光》

2025

汽车制造过程中焊接能耗及碳排放分析

顾勇，杨清云，张培磊

《金属加工(热加工)》

2025

不同焊接速度对AH36钢激光-电弧复合焊熔滴与熔池动态行为影响研究

夏淦，苟星禄，冯俊博，宋凌霄，李霁轩，陈展鹏，方超，张培磊

《金属加工(热加工)》

2025

基于改进YOLOv5网络的管道环焊缝射线底片缺陷智能识别

汤大赟，袁健伟，吴頔，何东昌，张培磊，潘斌，龚浩，金鸿飞

《电焊机》

2025

基于梯度提升回归树的光纤与半导体复合激光焊成形质量预测及优化

杨方毅，吴頔，李小婷，董金枋，曾达，黄宏星，叶欣，张培磊

《应用激光》

DOI

2025

高强钢激光-MIG复合焊不同工艺参数对焊缝成形的影响

马立，苟星禄，张培磊

《金属加工(热加工)》

2025

董金枋，杨方毅，吴頔，李小婷，曾达，黄宏星，吴浩，张鹏，姜良银，张培磊

《中国激光》

2024

基于OCT原位测量的可调环模激光焊飞溅定量评价

黄宏星，吴頔，曾达，彭彪，孙涛，张培磊，史海川

《焊接学报》

2024

光丝间距对激光-MAG复合焊过程稳定性的影响研究

颜铭良，张培磊，曾杰，刘庆永，王清曌，汪认，于治水

《应用激光》

2024

徐文虎，张培磊，蒋旗，刘志强，于治水，叶欣，吴頔，史海川

《机械工程材料》

2020

庄乔乔，张培磊，刘晓鹏

《热加工工艺》

2017

镁铝异种材料激光焊接的研究现状及发展

李雷，于治水，张培磊

《热加工工艺》

2017

铜合金表面激光熔覆Ni-Cr-TiB2-CaF2涂层组织及性能

姚延松，赵彦文，房刘杨，高秋实，秦阳，闫华，张培磊

Xiao Peng Liu, Peilei Zhang, Hua Yan, Yun Long Lu, Zhishui Yu, Chong Gui Li, Qing Hua Lu, Ding Ding Qiu

闫华，张培磊，于治水

Ding Min, Shi-sheng Liu, Hao Hong, Peng Tao, Peilei Zhang

Materials & Design (1980-2015)

DOI

2013

Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold

Hua Yan, Jie Zhang, Peilei Zhang, Zhishui Yu, Chonggui Li, Peiquan Xu, Lu Yunlong

Surface and Coatings Technology

DOI

2013

Microstructure evolution of laser remelted Al2O3–13wt.%TiO2 coatings

C.G. Li, Zihao Yu, Yujin Zhang, Peilei Zhang, Hua Yan, Qinghua Lu, Wanyang Li, You Wang

Journal of Alloys and Compounds

DOI

2012

张培磊，姚舜，于治水，丁敏，徐培全

《材料工程》

2011

激光制备Fe-Ni基非晶复合涂层及退火性能分析

张培磊，李铸国，姚成武，于治水，闫华

《焊接学报》

2011

激光熔覆和重熔制备Fe-Ni-B-Si-Nb系非晶纳米晶复合涂层

张培磊，闫华，徐培全，于治水，李铸国，姚成武

《中国有色金属学报》

2011

硬质合金/因瓦合金激光-氩弧复合焊缝界面的显微组织与元素扩散

徐培全，芦凤桂，张培磊，杨尚磊，于治水

《机械工程材料》

2011

Synthesis of Fe–Ni–B–Si–Nb amorphous and crystalline composite coatings by laser cladding and remelting

Peilei Zhang, Hua Yan, Chengwu Yao, Zhuguo Li, Zhishui Yu, Peiquan Xu

激光功率对船用10CrNiMnMoV钢表面处理后组织的影响

张培磊，张景，丁敏，姚成武，姚舜

《表面技术》

2009

激光熔覆制备Fe基非晶化涂层的研究进展

张培磊，姚成武，丁敏，芦凤桂

《焊接》

2008

两种铜磷钎料的紫铜真空钎焊研究

张培磊，丁敏，芦凤桂，姚舜，楼松年

《热加工工艺》

2006

搅拌摩擦焊温度场最新研究进展

张培磊，严铿，赵勇

《热加工工艺(焊接版)》

2005

TA5钛合金焊接接头的低周疲劳性能

严铿，张培磊，蒋成禹

《焊接学报》

精选作品

期刊论文

Inconel 718高温合金激光焊接组织与元素分布特征

基于光电同轴传感的极耳激光焊虚焊实时检测

Electromagnetic-hydrodynamic coupling and morphology feedback in the formation and evolution of LIPSS on metals under femtosecond laser multi-pulse irradiation

A review of the application of machine learning in short-pulse and ultrashort-pulse laser etching

Microstructural Evolution and Through‐Thickness Mechanical Property Gradients in a 70‐mm‐Thick 316LN Stainless Steel Joint Produced by Narrow‐Gap Laser Welding With Pre‐Placed Filler Plates

Laser welding of critical nuclear materials: A review of mechanisms, defect control, and advanced techniques

A critical review of coaxial wire feeding multi-beam laser metal deposition: from optical evolution to AI-driven control

Influence of heat treatment on microstructure and mechanical behavior of TiCN/AlSi10Mg composites fabricated by selective laser melting

Effect of deposition current on Fe3AlC0.5 precipitation in Fe3Al alloy fabricated via twin-wire directed energy deposition-arc process

Topology optimization methods and applications in metal additive manufacturing: a comprehensive review and prospective advances

Atomic-level surface planarization of fused silica by GCIB bombardment

ODSL-YOLO-based intelligent detection and automatic segmentation method for pressure pipeline weld defects

Effect of heat treatment on the microstructure and low-cycle fatigue properties of (SiC + TiB2)/AlSi10Mg composites fabricated by selective laser melting

Mechanistic analysis of femtosecond laser ablation in metals via multiphysical properties TTM: Integration of phase change properties and latent heat effects

Temperature effect on Au nanoscale surface flattening induced by gas cluster ion beam

Sidewall lack of fusion and suppression mechanism in pre-filled narrow-gap laser oscillating welding of thick 316LN stainless steel

Effect of construction angle on the LPBF-fabricated GH4169 thin-walled structure and heat treatment

Study on the influence of different heat source leading modes in laser-arc hybrid welding on the formation mechanism of bottom hump

Correction: A review of beam shaping technology in laser welding applications

Ni-Ti alloy porous structures and SLM fabricating for tribology: Tailoring self-lubricating performance through rational design

Mussel-inspired protein coating for Ti alloy implants

A review of beam shaping technology in laser welding applications

Femtosecond-laser-induced highly regular grating nanostructures: Spatiotemporal control routes for near-field enhancement on metallic glass surfaces

Effects of heat source arrangements on arc behavior and keyhole stability in Laser-Arc hybrid welding of 12-mm-thick AH36 steel

高反合金激光深熔焊熔深监测的OCT算法优化研究

汽车制造过程中焊接能耗及碳排放分析

不同焊接速度对AH36钢激光-电弧复合焊熔滴与熔池动态行为影响研究

基于改进YOLOv5网络的管道环焊缝射线底片缺陷智能识别

基于梯度提升回归树的光纤与半导体复合激光焊成形质量预测及优化

高强钢激光-MIG复合焊不同工艺参数对焊缝成形的影响

复杂噪声干扰下的压力管道环焊缝X射线图像优化方法

Directional protrusion effect of Ge surface induced by argon cluster oblique bombardment

Recent Progress of Tribological Properties of Metal-Based Biomimetic Materials: A Review

Additive manufacturing of metal lattice structures: A comprehensive review of technologies, mechanical properties, applications, and future trends

SiC surface flattening by large-sized Ar clusters based on the GCIB technique

Microstructures and mechanical properties analysis of TiAl joints using novel brazing filler metal

From classical algorithms to deep learning: a review of machine vision for monitoring welding dynamics

The influence of butt gap on weld stability of 12 mm-thick AH36 steel with different heat source configurations

Effect of Welding Speed on the Droplet Transfer in High-Power Laser-MAG Hybrid Welding of 12-mm-Thickness Steel Plates for Shipbuilding

Advancements and prospects of OCT-enabled all-process monitoring and inline quality assurance in laser keyhole welding: A critical review

An investigation into the biocompatibility of mussel protein coating on biodegradable ZK60 magnesium alloy

Multifunctional Fe3+-DOPA Coating Improves Wear Resistance, Corrosion Resistance and Biocompatibility of Orthopedic Titanium Implants

Shedding light on correlation mechanism between the keyhole/melt pool behaviors and photoelectric radiation information during laser welding process

Optimizing welding angle for enhancing hybrid welding seam quality

Laser surface texturing for enhancing wettability and mechanical properties in dissimilar material welding: A review

Mechanisms of Spatter Formation and Suppression in Aluminum Alloy via Hybrid Fiber–Semiconductor Laser System

Process parameter optimization of SLM AlSi10Mg based on Box-Behnken design and experimental study on microstructure and mechanical properties

A review of material surface processing utilizing gas cluster ion beam technology

A view of magnesium alloy modification and its application in orthopedic implants

Review on the effect of ceramic particles on the microstructure and mechanical properties of additively manufactured nickel-based superalloys

Defect intelligent detection for pipeline girth welds based on improved YOLOv5 model

Effect of heat treatment parameters on SLM-fabricated GNPs/IN718 composites: microstructural evolution and mechanical properties

Vacuum Brazing of TiAl Alloy with (Ti37.5Zr15Cu10Ni37.5)1-xTax Filler Metals

Online identification of laser welding penetration through multi-photoelectric decomposition-reconstruction and shifted-windows-based transformer deep learning framework

Effect of laser patterning treatment andhydroxyapatite coating on the surfacebiocompatibility of Ti-based metallic glass

Laser additive manufacturing CuZr based bulk metallic glasses: Simulations and experiments

可调环模激光焊接飞溅抑制机理及工艺优化研究

基于OCT原位测量的可调环模激光焊飞溅定量评价

光丝间距对激光-MAG复合焊过程稳定性的影响研究

激光-电弧复合焊接20 mm厚高强钢的成形机理研究

Research Progress of Metal Additive Manufacturing Technology and Application in Space: A Review

Influencing of Molten Pool Dynamic Behavior on the Weld Formation during the Laser‐Arc Hybrid Welding of 12 mm Thick Steel

Laser-arc hybrid welding of 25 mm high strength steel sections

Review of additive manufactured metallic metamaterials: Design, fabrication, property and application

Fabrication and tribological properties of bionic surface texture self-lubricating 60NiTi alloy via selective laser melting and infiltration

Near‐Field‐Regulated Ultrafast Laser Supra‐Wavelength Structuring Directly on Ultrahard Metallic Glasses (Adv. Mater. 45/2024)

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

Research on the dynamic process and defect formation in laser-arc hybrid welding of 12-mm thick AH36 steel

A review of machine learning in additive manufacturing: design and process

Effect of heat treatment patterns on microstructure and mechanical properties of selective laser melting fabricated SiC/AlSi10Mg composite

Recent progress of laser processing technology in micro-LED display manufacturing: A review

Near‐Field‐Regulated Ultrafast Laser Supra‐Wavelength Structuring Directly on Ultrahard Metallic Glasses

High-temperature creep mechanism of Ti-Ta-Nb-Mo-Zr refractory high-entropy alloys prepared by laser powder bed fusion technology

Investigating the influence of TiN on microstructural, mechanical, and tribological properties in selective laser melting of Inconel 718-based composites

A performance comparison of deep learning and shallow machine learning in acoustic emission monitoring of aluminium alloy pulsed laser welding

A Review on Manufacturing Pure Refractory Metals by Selective Laser Melting

A review of ultra-short pulse laser micromachining of wide bandgap semiconductor materials: SiC and GaN

Selective Laser Melted Ti-6Al-4V Alloy after Post-Heat Treatments: Microstructure, Mechanical Properties and Fatigue Behavior