李云杰｜东北大学｜学者主页

2026

基于热力多场耦合的42CrMo钢大棒材淬火工艺数值模拟

张瑞，王晓晖，袁渊，杨奇军，陈冬，李云杰，袁国

《热加工工艺》

2026

回火工艺对1300 MPa级高压无缝气瓶用钢组织性能的影响

张宇婷，王勇，陈鹏，李海平，李云杰，袁国

《轧钢》

DOI

2026

数字化驱动的金属增材制造现状与展望

李金龙，李云杰，袁国，王国栋

《华北理工大学学报(自然科学版)》

2026

回火时间对2300 MPa屈服强度应变-时效中锰钢组织性能的影响

刘炫业，刘屹，汪净，肖大恒，贾蕴航，李春雨，李云杰，袁国，王国栋

《材料研究学报》

2026

Hot Deformation Behavior and Microstructural Evolution of a 5Mn Medium‐Mn Steel: Strain‐Compensated Arrhenius Modeling and DMM Processing Maps

Kaiwen Zhang, Zihang Qu, Tiankun Peng, Jiale Sun, Guang Jiang, Haiping Li, Wang Chenxi, Yunjie Li, Guo Yuan, Guodong Wang

steel research international

DOI

2026

Experimental study of thermo-mechanical properties of binary PCM-fiber composite energy piles

Hong Chang, Huicheng Jiang, Yunjie Li, Yuan Du, Xing Wu, Zhao-Xuan Wang, Sheng Jiang, Zhengheng Gan

Energy and Buildings

DOI

2026

Energy storage optimization of composite phase change material and fiber synergistically enhanced concrete: numerical modeling and experiment

Hong Chang, Huicheng Jiang, Yuan Du, Yunjie Li, Xing Wu, Zhao-Xuan Wang, Sheng Jiang, Zhengheng Gan

Journal of Building Engineering

DOI

2026

Model test study of customized phase change materials for energy piles under multiple cooling cycles

Hong Chang, Yuan Du, Yunjie Li, Xing Wu, Huicheng Jiang, Zhao-Xuan Wang, Xiaoping Su, Zhengheng Gan

Applied Thermal Engineering

DOI

2025

调质温度对超高强中锰钢微观组织和力学性能的影响

蒋家乐，李云杰，李小琳，袁国

《铸造技术》

2025

2 GPa超高强中锰钢中的夹杂物对其高周疲劳性能的影响

李昌鹏，庞建超，王子龙，李云杰，李琳琳

《材料研究学报》

2025

GCr15轴承钢中渗碳体粒径的调控对其硬度的影响

刘晶，李云杰，秦煜，李琳琳

《材料研究学报》

2025

AF1410钢表面激光熔覆WC增强Ni基复合涂层的组织与性能

任津毅，牟建伟，于传军，李世键，赵兴旺，李云杰

《金属热处理》

DOI

2025

淬火温度对盾构机刀圈用新型H13B钢组织与性能的影响

屈子航，张凯文，李云杰，康健，袁国

《金属热处理》

DOI

2025

Influence of Retained Austenite on the Fatigue Crack Growth Behavior of C‐Si‐Mn TRIP Steel

Zilong Wang, Yujie Wang, Yunjie Li, Peng Zhang, Linlin Li

Fatigue & Fracture of Engineering Materials & Structures

DOI

2025

Effect of Cooling Medium on Microstructure and Properties of Ultrahigh Strength Martensitic Quenched and Tempered Steel

Y.Q. Wang, Guo Ding Yuan, Fuchang Xu, Jian Kang, Zihan Wu, Wenyuan Geng, Dongsheng Liu, Yunjie Li, Chao Wang

steel research international

DOI

2025

Correlation of TRIP effect and Lüders band in a 2.3 GPa ultra-high yield strength medium Mn steel with martensite matrix

Yi Liu, Jiale Jiang, Yunjie Li, Jian Kang, Xiaolin Li, Guo Ding Yuan, Guodong Wang

Materials Science and Engineering A

DOI

2025

Tailoring banded-equiaxed heterogeneous structure and martensite variants to achieve high toughness and high ductility in a newly designed 2.4 GPa high-strength steel

Jiale Jiang, Yunjie Li, Yi Liu, Jian Kang, Xiaolin Li, Guo Ding Yuan, Guodong Wang

Journal of Material Science and Technology

DOI

2025

Thermo-mechanical behavior of PCM-enhanced steel pipe energy piles

Hong Chang, Zhengheng Gan, Xing Wu, Yunjie Li, Huicheng Jiang, Zhao-Xuan Wang, Song-Ying Zhao, Yunli Gao

Applied Thermal Engineering

DOI

2024

Effect of V and Nb on the microstructure and properties of high strength and toughness steel for petroleum casing

Yunkai Wang, Jian Kang, Dongsheng Liu, Yunjie Li, Cui Wang, Zihan Wu, Ningtao Niu, Guo Ding Yuan

Journal of Materials Research and Technology

DOI

2024

Thermo-mechanical behavior of steel pipe energy piles under thermal imbalance cycles

Hong Chang, Zhengheng Gan, Huang Zhao, Yunjie Li, Haozhi Jiang, Xing Wu, Song-Ying Zhao

Construction and Building Materials

DOI

2024

Experimental study of phase change energy pile based on Gum Arabic and Polyethylene Glycol 600 under multiple Thermal-Cold cycles

Hong Chang, Zhengheng Gan, Sheng Jiang, Yunjie Li, Haozhi Jiang, Song-Ying Zhao

Construction and Building Materials

DOI

2024

Analysis of the effect of multiple thermal-cold cycles on the bearing performance of phase change energy piles

Hong Chang, Sheng Jiang, Haozhi Jiang, Yunjie Li, Zhengheng Gan, Song-Ying Zhao

Geothermics

DOI

2023

High strength-high ductility combination in a low-density medium Mn steel prepared by a highly efficient route

Cansheng Yu, Lirong Sun, Han Xi, Yi Liu, Yunjie Li, Jian Kang, Hesong Wang, Zhiyuan Chang

Journal of Materials Research and Technology

DOI

2023

Effects of Quenching Temperature on the Microstructure and Mechanical Properties of a Strip-Cast Medium-Mn Steel Processed by Quenching and Partitioning

Cansheng Yu, Hesong Wang, Yuanxiang Zhang, Yunjie Li, Jian Kang, Zhiyuan Chang

Metals

DOI

2023

Controllable selection of martensitic variant enables concurrent enhancement of strength and ductility in a low-carbon steel

T.W. Yin, Y.F. Shen, Nan Jia, Yunjie Li, W.Y. Xue

International Journal of Plasticity

DOI

2023

Achieving unprecedented yield strength of 2.2 GPa with high ductility in formed parts using strain-aging

Yunjie Li, Linlin Li, Jian Kang, Ningtao Niu, Han Xi, Yi Liu, Guo Ding Yuan, Guodong Wang

Scripta Materialia

DOI

2023

Ductile 2-GPa steels with hierarchical substructure

Yunjie Li, Guo Ding Yuan, Linlin Li, Jian Kang, Fengkai Yan, Pengju Du, Dierk Raabe, Guodong Wang

Science

DOI

2022

Temperature distribution prediction in control cooling process with recurrent neural network for variable-velocity hot rolling strips

Dong Chen, Rui Zhang, Zhenlei Li, Yunjie Li, Guo Ding Yuan

The International Journal of Advanced Manufacturing Technology

DOI

2021

Online Cooling System and Improved Similar Self-adaptive Strategy for Hot-rolled Seamless Steel Tube

Dong Chen, Rui Zhang, Yunjie Li, Zhenlei Li, Guo Ding Yuan

ISIJ International

DOI

2021

Characterisation on impact-toughness in Al-bearing hot-rolled TRIP steel produced through dynamic-partitioning

Xiaohui Wang, Jian Kang, Yunjie Li, Guo Ding Yuan, Raja Devesh Kumar Misra, Guodong Wang

Materials Science and Technology

DOI

2020

Omega transition accompanied by mechanically-induced twinned martensite

Pengju Du, Yunjie Li, R.D.K. Misra, Di Wu

Materials Research Express

DOI

2019

Characterisation on Al-bearing hot-rolled TRIP steel produced through isothermal bainite transformation

Xiaohui Wang, Jian Kang, Yunjie Li, Guo Ding Yuan, R.D.K. Misra, Guodong Wang

Materials Science and Technology

DOI

2019

Effect of deformation parameters in unrecrystallization range on microstructural characteristics in Al-bearing hot-rolled TRIP steel

Xiaohui Wang, Jian Kang, Yunjie Li, Guo Ding Yuan, R.D.K. Misra, Guodong Wang

Journal of Iron and Steel Research International

DOI

2019

A novel process involving multiple strengthening mechanisms for production of low-residual stress X80 pipe steel based on ultra-fast cooling

Z.L. Li, D. Chen, Yunjie Li, Xiuqi Wang, Jian Kang, Guo Ding Yuan

Materials Letters

DOI

2019

Research and Application of Model and Control Strategies for Hot Rolled Strip Cooling Process Based on Ultra-Fast Cooling System

Dong Chen, Zhenlei Li, Yunjie Li, Guo Ding Yuan

ISIJ International

DOI

2019

A medium-Mn steel processed by novel twin-roll strip casting route

Hesong Wang, Yuanxiang Zhang, Rong Ran, Yang Wang, Jian Kang, Yunjie Li, R.D.K. Misra, Guo Yuan, Guodong Wang

Materials Science and Technology

DOI

2019

Response of retained austenite to quenching temperature in a novel low density Fe-Mn-Al-C steel processed by hot rolling-air cooling followed by non-isothermal partitioning

Yunjie Li, D. Liu, D. Chen, Jian Kang, X.H. Wang, Guo Ding Yuan, R.D.K. Misra, Guodong Wang

Materials Science and Engineering A

DOI

2019

Effect of Cooling Rates in Coiling Process on Microstructures and Mechanical Properties in Al-Bearing Hot-Rolled TRIP Steel

Xiaohui Wang, Jian Kang, Yunjie Li, Guo Ding Yuan, R.D.K. Misra, Guodong Wang

Acta Metallurgica Sinica (English Letters)

DOI

2018

Determination of retained austenite using CCE model accounting for isothermal transformation in a low density quenched and partitioned steel

Yunjie Li, Q.J. Mao, Jian Kang, X.H. Wang, Guo Ding Yuan, Guodong Wang

Materials Letters

DOI

2018

Design of a low density Fe-Mn-Al-C steel with high strength-high ductility combination involving TRIP effect and dynamic carbon partitioning

Jian Kang, Yunjie Li, X.H. Wang, Hesong Wang, Guo Ding Yuan, R.D.K. Misra, Guodong Wang

Materials Science and Engineering A

DOI

2018

Quenching above martensite start temperature in quenching and partitioning (Q&P) steel through control of partial phase transformation

Yunjie Li, D. Liu, Weina Zhang, Jian Kang, D. Chen, Guo Ding Yuan, Guodong Wang

Materials Letters

DOI

2018

Combined thermo-mechanical controlled processing and dynamic carbon partitioning of low carbon Si/Al-Mn steels

Yunjie Li, D. Chen, D. Liu, Jian Kang, Guo Ding Yuan, Q.J. Mao, R.D.K. Misra, Guodong Wang

Materials Science and Engineering A

DOI

2017

低碳Si-Mn系DQ&P钢组织演变模拟研究

李云杰，康健，袁国，王国栋

《东北大学学报(自然科学版)》

2017

Control of Carbon Content in Steel by Introducing Proeutectoid Ferrite Transformation into Hot-Rolled Q&P Process

Xiaolei Li, Yunjie Li, Jian Kang, Chengning Li, Guo Ding Yuan, Guodong Wang

Journal of Materials Engineering and Performance

DOI

2017

Microstructural Evolution and Dynamic Partitioning Behavior in Quenched and Partitioned Steels

Yunjie Li, Dong Chen, Xiaolei Li, Jian Kang, Guo Yuan, R.D.K. Misra, Guodong Wang

steel research international

DOI

2017

A novel phase transition behavior during dynamic partitioning and analysis of retained austenite in quenched and partitioned steels

Yunjie Li, Jian Kang, Weina Zhang, D. Liu, X.H. Wang, Guo Ding Yuan, R.D.K. Misra, Guodong Wang

Materials Science and Engineering A

DOI

2016

Microstructure and partitioning behavior characteristics in low carbon steels treated by hot-rolling direct quenching and dynamical partitioning processes

Yunjie Li, Xiaolei Li, Guo Ding Yuan, Jian Kang, Dong Chen, Guodong Wang

Materials Characterization

DOI

2016

Effect of direct quenching and partitioning treatment on mechanical properties of a hot rolled strip steel

Jian Kang, Chao Wang, Yunjie Li, Guo Ding Yuan, Guodong Wang

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2013

Transformation and precipitation behaviour of Ti–Mo bearing high strength medium-carbon steel

Xiang Deng, Z Wang, R.D.K. Misra, Yunjie Li, G Wang

Materials Science and Technology

DOI

精选作品

期刊论文

基于热力多场耦合的42CrMo钢大棒材淬火工艺数值模拟

回火工艺对1300 MPa级高压无缝气瓶用钢组织性能的影响

数字化驱动的金属增材制造现状与展望

回火时间对2300 MPa屈服强度应变-时效中锰钢组织性能的影响

Hot Deformation Behavior and Microstructural Evolution of a 5Mn Medium‐Mn Steel: Strain‐Compensated Arrhenius Modeling and DMM Processing Maps

Experimental study of thermo-mechanical properties of binary PCM-fiber composite energy piles

Energy storage optimization of composite phase change material and fiber synergistically enhanced concrete: numerical modeling and experiment

Model test study of customized phase change materials for energy piles under multiple cooling cycles

调质温度对超高强中锰钢微观组织和力学性能的影响

2 GPa超高强中锰钢中的夹杂物对其高周疲劳性能的影响

GCr15轴承钢中渗碳体粒径的调控对其硬度的影响

AF1410钢表面激光熔覆WC增强Ni基复合涂层的组织与性能

淬火温度对盾构机刀圈用新型H13B钢组织与性能的影响

Influence of Retained Austenite on the Fatigue Crack Growth Behavior of C‐Si‐Mn TRIP Steel

Effect of Cooling Medium on Microstructure and Properties of Ultrahigh Strength Martensitic Quenched and Tempered Steel

Correlation of TRIP effect and Lüders band in a 2.3 GPa ultra-high yield strength medium Mn steel with martensite matrix

Tailoring banded-equiaxed heterogeneous structure and martensite variants to achieve high toughness and high ductility in a newly designed 2.4 GPa high-strength steel

Thermo-mechanical behavior of PCM-enhanced steel pipe energy piles

Effect of V and Nb on the microstructure and properties of high strength and toughness steel for petroleum casing

Thermo-mechanical behavior of steel pipe energy piles under thermal imbalance cycles

Experimental study of phase change energy pile based on Gum Arabic and Polyethylene Glycol 600 under multiple Thermal-Cold cycles

Analysis of the effect of multiple thermal-cold cycles on the bearing performance of phase change energy piles

High strength-high ductility combination in a low-density medium Mn steel prepared by a highly efficient route

Effects of Quenching Temperature on the Microstructure and Mechanical Properties of a Strip-Cast Medium-Mn Steel Processed by Quenching and Partitioning

Controllable selection of martensitic variant enables concurrent enhancement of strength and ductility in a low-carbon steel

Achieving unprecedented yield strength of 2.2 GPa with high ductility in formed parts using strain-aging

Ductile 2-GPa steels with hierarchical substructure

Temperature distribution prediction in control cooling process with recurrent neural network for variable-velocity hot rolling strips

Online Cooling System and Improved Similar Self-adaptive Strategy for Hot-rolled Seamless Steel Tube

Characterisation on impact-toughness in Al-bearing hot-rolled TRIP steel produced through dynamic-partitioning

Omega transition accompanied by mechanically-induced twinned martensite

Characterisation on Al-bearing hot-rolled TRIP steel produced through isothermal bainite transformation

Effect of deformation parameters in unrecrystallization range on microstructural characteristics in Al-bearing hot-rolled TRIP steel

A novel process involving multiple strengthening mechanisms for production of low-residual stress X80 pipe steel based on ultra-fast cooling

Research and Application of Model and Control Strategies for Hot Rolled Strip Cooling Process Based on Ultra-Fast Cooling System

A medium-Mn steel processed by novel twin-roll strip casting route

Response of retained austenite to quenching temperature in a novel low density Fe-Mn-Al-C steel processed by hot rolling-air cooling followed by non-isothermal partitioning

Effect of Cooling Rates in Coiling Process on Microstructures and Mechanical Properties in Al-Bearing Hot-Rolled TRIP Steel

Determination of retained austenite using CCE model accounting for isothermal transformation in a low density quenched and partitioned steel

Design of a low density Fe-Mn-Al-C steel with high strength-high ductility combination involving TRIP effect and dynamic carbon partitioning

Quenching above martensite start temperature in quenching and partitioning (Q&P) steel through control of partial phase transformation

Combined thermo-mechanical controlled processing and dynamic carbon partitioning of low carbon Si/Al-Mn steels

低碳Si-Mn系DQ&P钢组织演变模拟研究

Control of Carbon Content in Steel by Introducing Proeutectoid Ferrite Transformation into Hot-Rolled Q&P Process

Microstructural Evolution and Dynamic Partitioning Behavior in Quenched and Partitioned Steels

A novel phase transition behavior during dynamic partitioning and analysis of retained austenite in quenched and partitioned steels

Microstructure and partitioning behavior characteristics in low carbon steels treated by hot-rolling direct quenching and dynamical partitioning processes

Effect of direct quenching and partitioning treatment on mechanical properties of a hot rolled strip steel

Transformation and precipitation behaviour of Ti–Mo bearing high strength medium-carbon steel