唐延川｜华东交通大学｜学者主页

2026

冷轧变形对5083Al/SUS405层状复合材料机械性能的影响

刘树生，唐延川，李鑫龙，黄锦康，宋志强

《有色金属科学与工程》

2026

激光熔丝沉积7075铝合金的热裂敏感性

李宇城，唐延川，孙思敏，肖树，房魏涛，宋新凯

《材料热处理学报》

2026

Evolution of microstructures and the strength-ductility improvement of laser-welded titanium/steel bimetallic sheets by increasing nickel content in filler metals

Dejia Liu, Haitao Xiao, Guodong Lv, Shutong Wu, Yanchuan Tang

Materials Science and Engineering A

DOI

2026

Assessment of solidification cracking susceptibility and mechanisms in 316L stainless steel repaired by laser-deposited CoCrFeNi high entropy alloy

Yanchuan Tang, Lili Chen, Wenhui Wang, Haoyuan Ren, Dejia Liu, Haitao Jiao, Guoyun Luo, Lijun Song, Longzhi Zhao

Journal of Materials Research and Technology

DOI

2025

FeCoCrNiMn/6061铝基复合材料的组织性能

胡勇，路世峰，杨滔，潘春旺，刘林成，赵龙志，唐延川，刘德佳，焦海涛

《材料研究学报》

2025

再结晶对FeCoCrNiMn高熵合金组织及耐蚀性的影响

金一豪，胡勇，游小凡，焦海涛，赵龙志，唐延川，刘德佳

《热加工工艺》

2025

Study on High‐Strength‐Plasticity Balance of Laser‐Deposited Bainitic Steel through Isothermal Heat Treatment

Longzhi Zhao, Xin Luo, Zhao Mingjuan, Yumeng Guan, Jiao Haitao, Yanchuan Tang, Xiangwu Xiong, Xupeng Lang

steel research international

DOI

2025

Effect of intermediate annealing temperature on the microstructure evolution and mechanical properties of Fe50Mn30Co10Cr10 high entropy alloy prepared by two-stage cold rolling

Haitao Jiao, Dazhi Zhong, Yanchuan Tang, Ning Xu, Zi-Long Zhao, Zhiping Hu, Yong Jun Hu, Dejia Liu, Longzhi Zhao

Journal of Alloys and Compounds

DOI

2025

Synergistic strengthening by in-situ eutectic microstructure and carbide precipitates on tribological performance and oxidation resistance in laser-deposited SiC-IN718 composites

Longzhi Zhao, Juntao Zhu, Zhao Mingjuan, Xiangwu Xiong, Yanchuan Tang, Hongbing Yu, Yong Ming Hu, Dejia Liu, Jiao Haitao

Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications

DOI

2024

层间硬度比对Cu-Be/Cu层状异构复合材料强韧性的影响

柳春林，唐延川，张庆祝，秦新宝，郎鹏江，张欣磊

《有色金属科学与工程》

2024

Al含量对激光沉积(CoCrFeNi)-Al高熵合金晶粒形貌的影响

王文慧，唐延川，王友星，万能

《热加工工艺》

2024

温轧对Fe50Mn30Co10Cr10高熵合金组织及力学性能的影响（英文）

焦海涛，吴文胜，侯宗伯，陈朝霞，赵子龙，唐延川，张元祥，赵龙志

Journal of Central South University

2024

激光沉积贝氏体/马氏体复相超高强钢组织性能研究

唐延川，张锦锋，沈明学，焦海涛，刘德佳，唐兴昌

《中国激光》

2024

Microstructure and mechanical properties of 9 % nickel steel welded joints using a CoCrNi filler wire for cryogenic storage tanks

Dejia Liu, Wenjun Ao, Nianlong Xue, Yanchuan Tang, Haitao Jiao, Junru Ma

International Journal of Pressure Vessels and Piping

DOI

2024

Enhanced tribology properties induced by eutectic microstructure strengthening and in-situ reinforcing in laser cladded composite coating

Longzhi Zhao, Ziyun Cao, Chuxiang Deng, Zhao Mingjuan, Haitao Jiao, Yong Le Hu, Dejia Liu, Yanchuan Tang, Lai‐Chang Zhang

Journal of Materials Science

DOI

2024

Solidification and tribological behaviors of CoCrFeNiSi0.5-(Al,Ti) non-equiatomic high entropy alloy coatings fabricated by direct laser deposition

Yanchuan Tang, Wenhui Wang, Neng Wan, Xingchang Tang, Haitao Jiao, Dejia Liu, Yong Jun Hu, Longzhi Zhao

Surface and Coatings Technology

DOI

2024

Study on Microstructure and Corrosion Resistance of FeCoCrNiMo/Al-10Si Composites Prepared by Laser Deposition

Yong Jun Hu, Xin Yu, Longzhi Zhao, Yanchuan Tang, Haitao Jiao, Dejia Liu

Journal of Materials Engineering and Performance

DOI

2023

Ti5Si3含量对SiCp/2009Al激光填粉焊接头组织性能的影响

赵明娟，程梓威，赵龙志，刘德佳，焦海涛，唐延川，余梦

《华东交通大学学报》

2023

激光沉积CoCrFeNiSi-(Al,Ti)非等原子比高熵合金涂层腐蚀行为研究

唐延川，王友星，刘德佳，焦海涛，胡勇，唐兴昌，赵龙志

《表面技术》

2023

Role of geometrically necessary dislocations on the superior damping capacity and high strength-ductility of 5083Al/SUS405 laminated heterostructure composites

Yanchuan Tang, Xinglong Li, Shu-Sheng Liu, Haitao Jiao, Dejia Liu, Yong Le Hu, Longzhi Zhao

Materials Letters

DOI

2023

Microstructure and mechanical properties of dissimilar metal joints of copper/aluminum using FeCoCrNiMn filler material

Dejia Liu, Chongling Ni, Zhe Ma, Bin Li, Yanchuan Tang, Xiangjie Wang

Welding in the World

DOI

2023

Enhanced Hardness-Toughness Balance Induced by Adaptive Adjustment of the Matrix Microstructure in In Situ Composites

Zhao Mingjuan, Xiangqian Jiang, Yumeng Guan, Haichao Yang, Longzhi Zhao, Dejia Liu, Haitao Jiao, Meng Yu, Yanchuan Tang, Lai‐Chang Zhang

Materials

DOI

2023

Effect of pre-recovery annealing on recrystallisation behaviour of strip-cast non-oriented electrical steel

Haitao Jiao, Xin-xiang Xie, Wensheng Wu, Long-zhi Zhao, Yong Jun Hu, De-jia Liu, Yanchuan Tang, Mingjuan Zhao

Materials Science and Technology

DOI

2022

原位TiC-TiB2/Al-12Si混杂铝基复合材料组织及耐腐蚀性能研究

胡勇，刘员员，符声启，赵龙志，焦海涛，刘德佳，唐延川

《稀有金属材料与工程》

2022

超声辅助激光沉积原位TiC-TiB2/Al-12Si铝基复合材料微观组织及摩擦磨损行为研究

赵明娟，胡勇，符声启，赵龙志，焦海涛，刘德佳，唐延川

《稀有金属材料与工程》

2022

304/Q235复合板多主元高熵化焊缝的组织与性能

刘德佳，扎学安，王伟雄，唐延川，赵龙志，徐宏明

《金属热处理》

2022

热处理温度对6082铝合金焊接接头性能的影响

陈国宁，唐延川

《兵器材料科学与工程》

2022

高熵合金应用于焊接领域的研究现状

刘德佳，扎学安，李斌，唐延川，胡勇，赵龙志

《华东交通大学学报》

2022

Cu-Be/Cu层状非均质复合材料塑性变形行为的原位研究

唐延川，张欣磊，柳春林，焦海涛，刘德佳，胡勇，赵龙志

《华东交通大学学报》

2022

Enhanced {100} Recrystallization Texture in Strip‐Cast Nonoriented Electrical Steel by Two‐Stage Annealing

Haitao Jiao, Xin-xiang Xie, Yong Jun Hu, De-jia Liu, Yanchuan Tang, Long-zhi Zhao

steel research international

DOI

2022

Investigation on microstructures and properties of semi-solid Al80Mg5Li5Zn5Cu5 light-weight high-entropy alloy during isothermal heat treatment process

Yong Jun Hu, Yuanyuan Liu, Long-zhi Zhao, Yanchuan Tang, Haitao Jiao, De-jia Liu

China Foundry

DOI

2022

Microstructure and Mechanical Properties of Welded Joints of Stainless Steel Clad Sheets Using Cr-Ni-Cu-Al Multi-Principal Filler Wires

Dejia Liu, Xuean Zha, WeiXiong Wang, Yanchuan Tang, Haitao Jiao, Yong Jun Hu, Longzhi Zhao, Jian Zhang

Journal of Materials Engineering and Performance

DOI

2022

Microstructural Evolution and Mechanical Properties of Semi-Solid Al15Mg45Li39Ca0.5Si0.5 Light-Weight High Entropy Alloys Fabricated by Isothermal Heat Treatment

Yong Jun Hu, Fei Liu, Longzhi Zhao, Yanchuan Tang, Haitao Jiao

Metals and Materials International

DOI

2022

Evaluation of surface corrosion and wear resistance in the weld metal by using multi-principal filler wires via high-entropy design

Weixiong Wang, Dejia Liu, Bin Li, Bo Li, Haitao Jiao, Yanchuan Tang, Yong Jun Hu, Longzhi Zhao, Mingxue Shen

Welding in the World

DOI

2022

A novel Ni–Co–Al multi-principal filler wire for inhibiting Fe–Ti intermetallic compounds in welding CP-Ti/Q345 bimetallic sheets

Dejia Liu, Weixiong Wang, Bin Li, Haitao Jiao, Yanchuan Tang, Yong Jun Hu, Longzhi Zhao

Science and Technology of Welding & Joining

DOI

2022

Role of Hot Rolling in Microstructure and Texture Development of Strip Cast Non-Oriented Electrical Steel

Haitao Jiao, Xin-xiang Xie, Xinyi Hu, Longzhi Zhao, Raja Devesh Kuma Misra, Dejia Liu, Yanchuan Tang, Yong Jun Hu

Metals

DOI

2021

激光沉积Mg2Si/Al的原位反应动力学（英文）

胡勇，符声启，赵龙志，唐延川，刘德佳，余楠

《稀有金属材料与工程》

2021

稀土Ce对激光熔覆高硼贝氏体涂层性能的影响

张坚，黄道思，赵龙志，焦海涛，唐延川，刘德佳，赵明娟，李劲

《金属热处理》

DOI

2021

TiO2-CNTs/FeNi36激光熔覆复合涂层制备研究

张鹏，赵龙志，赵明娟，王怀，唐延川，焦海涛，李劲

《华东交通大学学报》

DOI

2021

激光沉积AlxTiCrMnCu高熵合金组织性能的研究

胡勇，刘飞，王达豪，赵龙志，唐延川，刘德佳，沈明学，赵火平，焦海涛

《稀有金属材料与工程》

2021

轧制工艺对薄带铸轧无取向硅钢组织性能的影响

焦海涛，蔺晓雪，谢信祥，刘德佳，唐延川，赵龙志

《轧钢》

2021

合金化组元(Al, Cr, Si, Ti)含量对激光沉积(FeNiCo)-(AlCrSiTi)非等原子比多组元合金涂层组织与力学性能的影响

唐延川，万能，唐兴昌，刘德佳，焦海涛，胡勇，赵龙志

《材料工程》

2021

A comparison of the microstructures and hardness values of non-equiatomic (FeNiCo)-(AlCrSiTi) high entropy alloys having thermal histories related to laser direct metal deposition or vacuum remelting

Yanchuan Tang, Neng Wan, Mingxue Shen, Haitao Jiao, Dejia Liu, Xingchang Tang, Longzhi Zhao

Journal of Materials Research and Technology

DOI

2021

Effect of alloying components (Al,Cr,Si,Ti) content on microstructure and mechanical properties of non-equiatomic (FeNiCo)-(AlCrSiTi) multicomponent alloy coatings manufactured by laser deposition

Yanchuan Tang, WAN Neng, TANG Xing-chang, LIU De-jia, Jiao Haitao, Hu Yong, ZHAO Long-zhi

DOAJ (DOAJ: Directory of Open Access Journals)

DOI

2020

Cu-Be/Cu-Zn层状复合材料固溶时效后的显微组织与力学性能

唐延川，许举文，张欣磊，崔泽云，王文慧

《金属热处理》

DOI

2020

B对FeCoCrNiSiBx高熵合金激光熔覆层组织和硬度的影响

赵龙志，喻世豪，赵明娟，唐延川，焦海涛，李劲，宋立军

《金属热处理》

DOI

2020

TiO2包覆CNTs复合纳米线的制备研究

赵龙志，王怀，赵明娟，张鹏，唐延川，刘德佳，李劲，宋立军

《兵器材料科学与工程》

DOI

2020

Ti含量对Fe-Ni-Ti激光熔覆层摩擦性能的影响

赵龙志，邓楚祥，王震，赵明娟，刘德佳，唐延川，焦海涛，李劲

《表面技术》

DOI

2020

Preferential interdendritic oxidation of laser additively manufactured Inconel 718

Guoyun Luo, Manping Cheng, Longzhi Zhao, Yanchuan Tang, Jianhua Yao, Hailong Cui, Lijun Song

Corrosion Science

DOI

2020

Evaluation of dissimilar metal joining of aluminum alloy to stainless steel using the filler metals with a high-entropy design

Dejia Liu, Jian Wang, Maobao Xu, Haitao Jiao, Yanchuan Tang, Deying Li, Longzhi Zhao, Shanguo Han

Journal of Manufacturing Processes

DOI

2020

Texture evolution in twin-roll strip cast non-oriented electrical steel with strong Cube and Goss texture

Haitao Jiao, Yunbo Xu, Longzhi Zhao, R.D.K. Misra, Yanchuan Tang, Dejia Liu, Yong Jun Hu, Mingjuan Zhao, Mingxue Shen

Acta Materialia

DOI

2020

Effects of the elemental composition of high-entropy filler metals on the mechanical properties of dissimilar metal joints between stainless steel and low carbon steel

Dejia Liu, Rui Guo, Yong Jun Hu, Jianbang Zeng, Mingxue Shen, Yanchuan Tang, Haitao Jiao, Longzhi Zhao, Xiaoyong Nie

Journal of Materials Research and Technology

DOI

2019

新工科背景下的《材料科学基础》课程教学的思考与探索

唐延川，陶培灵，沈明学，刘德佳，胡勇，赵龙志

《教育现代化》

DOI

2019

科教融合教育体系下的创新教学模式探索——以材料科学与工程专业为例

唐延川，陶培灵，沈明学，刘德佳，胡勇，赵龙志

《教育现代化》

DOI

2019

预热温度对钢轨表面激光熔覆贝氏体涂层的影响

赵龙志，杨海超，唐延川，李劲

《热加工工艺》

DOI

2019

激光功率对激光沉积Al-40%Si合金组织和性能的影响

张坚，吴三秀，赵龙志，刘德佳，赵明娟，唐延川，沈明学

《热加工工艺》

DOI

2019

机械合金化对CNTs-SiC-Ni激光熔覆涂层力学性能的影响

赵明娟，舒豹增，吴涛，刘德佳，赵龙志，唐延川，胡勇，宋立军

《应用激光》

DOI

2019

Microstructural evolution and magnetic properties in strip cast non-oriented silicon steel produced by warm rolling

Haitao Jiao, Yunbo Xu, Longzhi Zhao, R.D.K. Misra, Yanchuan Tang, M.J. Zhao, Dongping Liu, Yonglu Hu, Mingxue Shen

Materials Characterization

DOI

2019

Dissimilar Metal Joining of 304 Stainless Steel to SMA490BW Steel Using the Filler Metal Powders with a High-Entropy Design

Dejia Liu, Rui Guo, Yong Jun Hu, Mingxue Shen, Yanchuan Tang, Longzhi Zhao, Deying Li, Xiangjie Wang

Metals and Materials International

DOI

2019

Effect of Multipass Friction Stir Processing on Surface Corrosion Resistance and Wear Resistance of ZK60 Alloy

Dejia Liu, Mingxue Shen, Yanchuan Tang, Yong Jun Hu, Longzhi Zhao

Metals and Materials International

DOI

2019

Evaluation of corrosion resistance of multipass friction stir processed AZ31 magnesium alloy

Dejia Liu, Mingxue Shen, Yanchuan Tang, Yong Le Hu, Longzhi Zhao

Materials and Corrosion

DOI

2019

Investigation of semi-solid microstructures of an A356 alloy containing rare-earth Gd during isothermal heat treatment

Yong Jun Hu, Longzhi Zhao, Dejia Liu, Yanchuan Tang, Yongqiang Han

International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)

DOI

2018

激光沉积涂层裂纹控制的研究进展

赵龙志，王怀，赵明娟，杨海超，刘德佳，唐延川，胡勇

《华东交通大学学报》

2018

Dual-gradient bainite steel matrix composite fabricated by direct laser deposition

Yanchuan Tang, Haichao Yang, Daosi Huang, Longzhi Zhao, Dejia Liu, Mingxue Shen, Yong Jun Hu, Zhao Mingjuan, Jian Zhang, Li Jin, Meng Yu

Materials Letters

DOI

2018

Analysis of Weak Zones in Friction Stir Welded Magnesium Alloys from the Viewpoint of Local Texture: A Short Review

Dejia Liu, Yanchuan Tang, Mingxue Shen, Yong Jun Hu, Longzhi Zhao

Metals

DOI

2018

Microstructural evolution of semi-solid A356 alloy during reheating

Yong Le Hu, Longzhi Zhao, Dejia Liu, Yanchuan Tang, Hui Zhen Jiang

International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)

DOI

2018

Tuning Low Cycle Fatigue Properties of Cu-Be-Co-Ni Alloy by Precipitation Design

Yanchuan Tang, Yonglin Kang, Dejia Liu, Mingxue Shen, Yong Le Hu, Longzhi Zhao

Metals

DOI

2017

机械合金化转速对CNTs-SiC/Ni激光熔覆微观结构的影响

赵明娟，谢池，赵龙志，唐延川，张坚

《兵器材料科学与工程》

2017

Cu-Be-Co-Ni合金组织性能及时效硬化行为研究

唐延川

《北京科技大学》

2014

热轧终轧温度对形变时效状态QBe2合金薄板性能的影响

唐延川，康永林，岳丽娟，焦晓亮

《有色金属科学与工程》

精选作品

期刊论文

冷轧变形对5083Al/SUS405层状复合材料机械性能的影响

激光熔丝沉积7075铝合金的热裂敏感性

Evolution of microstructures and the strength-ductility improvement of laser-welded titanium/steel bimetallic sheets by increasing nickel content in filler metals

Assessment of solidification cracking susceptibility and mechanisms in 316L stainless steel repaired by laser-deposited CoCrFeNi high entropy alloy

FeCoCrNiMn/6061铝基复合材料的组织性能

再结晶对FeCoCrNiMn高熵合金组织及耐蚀性的影响

Study on High‐Strength‐Plasticity Balance of Laser‐Deposited Bainitic Steel through Isothermal Heat Treatment

Effect of intermediate annealing temperature on the microstructure evolution and mechanical properties of Fe50Mn30Co10Cr10 high entropy alloy prepared by two-stage cold rolling

Synergistic strengthening by in-situ eutectic microstructure and carbide precipitates on tribological performance and oxidation resistance in laser-deposited SiC-IN718 composites

层间硬度比对Cu-Be/Cu层状异构复合材料强韧性的影响

Al含量对激光沉积(CoCrFeNi)-Al高熵合金晶粒形貌的影响

温轧对Fe50Mn30Co10Cr10高熵合金组织及力学性能的影响（英文）

激光沉积贝氏体/马氏体复相超高强钢组织性能研究

Microstructure and mechanical properties of 9 % nickel steel welded joints using a CoCrNi filler wire for cryogenic storage tanks

Enhanced tribology properties induced by eutectic microstructure strengthening and in-situ reinforcing in laser cladded composite coating

Solidification and tribological behaviors of CoCrFeNiSi0.5-(Al,Ti) non-equiatomic high entropy alloy coatings fabricated by direct laser deposition

Study on Microstructure and Corrosion Resistance of FeCoCrNiMo/Al-10Si Composites Prepared by Laser Deposition

Ti5Si3含量对SiCp/2009Al激光填粉焊接头组织性能的影响

激光沉积CoCrFeNiSi-(Al,Ti)非等原子比高熵合金涂层腐蚀行为研究

Role of geometrically necessary dislocations on the superior damping capacity and high strength-ductility of 5083Al/SUS405 laminated heterostructure composites

Microstructure and mechanical properties of dissimilar metal joints of copper/aluminum using FeCoCrNiMn filler material

Enhanced Hardness-Toughness Balance Induced by Adaptive Adjustment of the Matrix Microstructure in In Situ Composites

Effect of pre-recovery annealing on recrystallisation behaviour of strip-cast non-oriented electrical steel

原位TiC-TiB2/Al-12Si混杂铝基复合材料组织及耐腐蚀性能研究

超声辅助激光沉积原位TiC-TiB2/Al-12Si铝基复合材料微观组织及摩擦磨损行为研究

304/Q235复合板多主元高熵化焊缝的组织与性能

热处理温度对6082铝合金焊接接头性能的影响

高熵合金应用于焊接领域的研究现状

Cu-Be/Cu层状非均质复合材料塑性变形行为的原位研究

Enhanced {100} Recrystallization Texture in Strip‐Cast Nonoriented Electrical Steel by Two‐Stage Annealing

Investigation on microstructures and properties of semi-solid Al80Mg5Li5Zn5Cu5 light-weight high-entropy alloy during isothermal heat treatment process

Microstructure and Mechanical Properties of Welded Joints of Stainless Steel Clad Sheets Using Cr-Ni-Cu-Al Multi-Principal Filler Wires

Microstructural Evolution and Mechanical Properties of Semi-Solid Al15Mg45Li39Ca0.5Si0.5 Light-Weight High Entropy Alloys Fabricated by Isothermal Heat Treatment

Evaluation of surface corrosion and wear resistance in the weld metal by using multi-principal filler wires via high-entropy design

A novel Ni–Co–Al multi-principal filler wire for inhibiting Fe–Ti intermetallic compounds in welding CP-Ti/Q345 bimetallic sheets

Role of Hot Rolling in Microstructure and Texture Development of Strip Cast Non-Oriented Electrical Steel

激光沉积Mg2Si/Al的原位反应动力学（英文）

稀土Ce对激光熔覆高硼贝氏体涂层性能的影响

TiO2-CNTs/FeNi36激光熔覆复合涂层制备研究

激光沉积AlxTiCrMnCu高熵合金组织性能的研究

轧制工艺对薄带铸轧无取向硅钢组织性能的影响

合金化组元(Al, Cr, Si, Ti)含量对激光沉积(FeNiCo)-(AlCrSiTi)非等原子比多组元合金涂层组织与力学性能的影响

A comparison of the microstructures and hardness values of non-equiatomic (FeNiCo)-(AlCrSiTi) high entropy alloys having thermal histories related to laser direct metal deposition or vacuum remelting

Effect of alloying components (Al,Cr,Si,Ti) content on microstructure and mechanical properties of non-equiatomic (FeNiCo)-(AlCrSiTi) multicomponent alloy coatings manufactured by laser deposition

Cu-Be/Cu-Zn层状复合材料固溶时效后的显微组织与力学性能

B对FeCoCrNiSiBx高熵合金激光熔覆层组织和硬度的影响

TiO2包覆CNTs复合纳米线的制备研究

Ti含量对Fe-Ni-Ti激光熔覆层摩擦性能的影响

Preferential interdendritic oxidation of laser additively manufactured Inconel 718

Evaluation of dissimilar metal joining of aluminum alloy to stainless steel using the filler metals with a high-entropy design

Texture evolution in twin-roll strip cast non-oriented electrical steel with strong Cube and Goss texture

Effects of the elemental composition of high-entropy filler metals on the mechanical properties of dissimilar metal joints between stainless steel and low carbon steel

新工科背景下的《材料科学基础》课程教学的思考与探索

科教融合教育体系下的创新教学模式探索——以材料科学与工程专业为例

预热温度对钢轨表面激光熔覆贝氏体涂层的影响

激光功率对激光沉积Al-40%Si合金组织和性能的影响

机械合金化对CNTs-SiC-Ni激光熔覆涂层力学性能的影响

Microstructural evolution and magnetic properties in strip cast non-oriented silicon steel produced by warm rolling

Dissimilar Metal Joining of 304 Stainless Steel to SMA490BW Steel Using the Filler Metal Powders with a High-Entropy Design

Effect of Multipass Friction Stir Processing on Surface Corrosion Resistance and Wear Resistance of ZK60 Alloy

Evaluation of corrosion resistance of multipass friction stir processed AZ31 magnesium alloy

Investigation of semi-solid microstructures of an A356 alloy containing rare-earth Gd during isothermal heat treatment

激光沉积涂层裂纹控制的研究进展

Dual-gradient bainite steel matrix composite fabricated by direct laser deposition

Analysis of Weak Zones in Friction Stir Welded Magnesium Alloys from the Viewpoint of Local Texture: A Short Review

Microstructural evolution of semi-solid A356 alloy during reheating

Tuning Low Cycle Fatigue Properties of Cu-Be-Co-Ni Alloy by Precipitation Design

机械合金化转速对CNTs-SiC/Ni激光熔覆微观结构的影响

Cu-Be-Co-Ni合金组织性能及时效硬化行为研究

热轧终轧温度对形变时效状态QBe2合金薄板性能的影响

会议论文

奥氏体化和等温转变温度对高碳钢盘条组织性能的影响