Chao Zhang, Qing-Hua Liu, Xueyang Miao, Miao-Miao Li, Rupeng Zhu, Jiajun Chen, X. Kan, Dong Jiang (2026). Dynamics of transmission shaft system with deformed compatibility. International Journal of Mechanical Sciences.DOI
Miao-Miao Li, Fan-Xuan Li, Ke-Qing Huang, Bingbing Qin, Rupeng Zhu (2026). Research on the feedback control strategy of smart spring vibration-reduction system based on PID algorithm. Journal of Vibration and Control.DOI
Miao-Miao Li, Xinyu Sun, Ran Zhou, Rupeng Zhu (2026). Research on the Dynamic Modeling Method of a Multi-Span Shaft System with the Smart Spring Support. Journal of Vibration Engineering & Technologies.DOI
Miao-Miao Li, Xue-Hui Yang, Bingbing Qin, Xinyu Sun, Rupeng Zhu (2026). Optimization design of viscoelastic dampers for tail drive shafting. International Journal of Mechanics and Materials in Design.DOI
Miao-Miao Li, Suhang Chen, Zhao Zhang, Rupeng Zhu (2026). Study on the dynamic modeling method of the tail horizontal shaft system with a folding device. Aerospace Science and Technology.DOI
Zhan-Wei Li, Fei Huang, Zhongmin He, Peng Cao, Ruijun Liang, Guang-Hu Jin, Rupeng Zhu (2026). Research on the coupled method of crack propagation and dynamic behavior of spiral bevel gears. Engineering Failure Analysis.DOI
Wei-Ping Yan, Hu Yu, Li Liu, Zhan-Wei Li, Chao Zhang, Wei-Fang Chen, Rupeng Zhu (2026). Traveling wave resonance in thin-walled spiral bevel gears: fatigue failure risk identification. Engineering Failure Analysis.DOI
Zhao Zhang, Miaomiao Li, Zhanwei Li, De Ni, Haiyang Ding, Hu Yu, Rupeng Zhu (2026). Dynamic modeling of high-speed helical gear transmission system with multiple geometric deviations and non-uniform contact. Mechanical Systems and Signal Processing.DOI
Weiping Yan, Hu Yu, Junling Xie, Rupeng Zhu, Weifang Chen, Shuai Wang (2026). Resonance response identification and vibration damping analysis of thin-walled spiral bevel gear. Mechanical Systems and Signal Processing.DOI
Weiping Yan, Hu Yu, Zhanwei Li, Miaomiao Li, De Ni, Zhao Zhang, Weifang Chen, Rupeng Zhu (2026). Modeling and vibration characteristics of flexible thin-walled aviation bevel gear systems with excitation coupling. Mechanical Systems and Signal Processing.DOI
Liyao Song, Peng Cao, Peng Tang, Jiangjian Li, Weifang Chen, Rupeng Zhu, Dan Wang (2026). Vibration suppression of supercritical transmission shafts via active limiting ring. Mechanical Systems and Signal Processing.DOI
Jie Yang, YUAN Xiaojie, W CHEN, Rupeng Zhu, Tianyu Liu (2026). Fatigue Life Study of Coaxial Reverse Twin Rotor Shaft Based on the Multi-axial Safety Life Assessment Method. Mechanisms and machine science.DOI
Zhao Zhang, Miaomiao Li, Rupeng Zhu, Weifang Chen, Yizhong Sun, Xi Wang (2026). Dynamic modeling and characteristics analysis of foldable tail horizontal shaft system for shipborne helicopters under maneuvering flight. Communications in Nonlinear Science and Numerical Simulation.DOI
Hu Yu, Weiping Yan, Qizhi Wan, Junling Xie, Zhao Zhang, Rupeng Zhu, Weifang Chen (2026). ConvFormer with dynamic chunked self-attention for RUL prediction of rotating machinery. Applied Mathematical Modelling.DOI
Chao Zhang, Weiping Yan, Jiajun Chen, Xueyang Miao, Rupeng Zhu, Weifang Chen, Dong Jiang (2026). Effects of projectile impact damage on mass distribution and stiffness change of the helicopter tail drive shaft: simulation and experiment. Australian Journal of Mechanical Engineering.DOI
Jiajun Chen, Sheng Xue, Chao Zhang, Rupeng Zhu, Weifang Chen (2026). Study on the offset load mechanism of herringbone gears and multi-objective optimization of HSGT. Journal of Vibration and Control.DOI
Miaomiao Li, Zhewei Zhuang, Zhenglong Zhou, Shixuan Zhu, Weifang Chen, Rupeng Zhu (2026). Static and dynamic stiffness and damping characteristics of ship limiters. Ships and Offshore Structures.DOI
Weiping Yan, Hu Yu, De Ni, Chao ZHANG, Zhanwei Li, Weifang Chen, Rupeng Zhu (2026). Dynamic characteristics and resonance response of thin-walled spiral bevel gear systems: Modelling and experiment. Thin-Walled Structures.DOI
Wangjian Wu, Huiyang Nie, Jing Zheng, Jian Li, Lei Wei, Rupeng Zhu, Dan Wang (2026). Experimental and Numerical Analysis of Ballistic Impact Damage of Helicopter Composite Tail Drive Shafts. Polymer Composites.DOI
Jingjing Wang, Rupeng Zhu, Zhanwei Li, Yizhong Sun, Wei Liu, Weiyang Zhou (2026). Main path identification and sensitivity analysis of encased differential gear trains with cracked sun gear. Journal of Vibration and Control.DOI
Qijia He, Shengshan Chen, Rupeng Zhu, Zhenlian Li, Lanjin Xu, Fei Guo (2026). Prediction of Rotary Lip Seal Performance Evolution under Aging and Wear Effects in Grease Lubrication. Tribology Transactions.DOI
Wenguang Zhou, Fengxia Lu, Jingjing Wang, W. L. Liu, Rupeng Zhu (2026). A novel resistance-based method for measuring oil film thickness on face gear tooth surfaces. Measurement.DOI
Miaomiao Li, Zhewei Zhuang, Xiaojie Yuan, Nanyang Su, Suhang Chen, Zhenglong Zhou, Rupeng Zhu (2026). Load‑bearing contribution analysis of the main gearbox support system in high‑speed helicopters. Mechanics Based Design of Structures and Machines.DOI
Wenguang Zhou, Rupeng Zhu, W. L. Liu, Jingjing Wang (2026). A Time-Varying Mesh Stiffness Model of Orthogonal Face Gears with Installation Errors Considering EHL. Lecture notes in mechanical engineering.DOI
Qizhi Wan, Rupeng Zhu, Weifang Chen (2026). Analysis of the Influence of Basic Gear Parameters on the Misalignment Degree of Wide-Faced Helical Gears. Lecture notes in mechanical engineering.DOI
Weiping Yan, Hu Yu, Shuai Wang, Rupeng Zhu (2026). Evaluation of Dangerous Vibration Modes and Damping Analysis in Thin-Walled Spiral Bevel Gears. Lecture notes in mechanical engineering.DOI
Jingjing Wang, Rupeng Zhu, W. L. Liu, Weiyang Zhou (2026). Transfer Path Analysis of the Encased Differential Gear Train for Coaxial Twin-Rotor Helicopter. Lecture notes in mechanical engineering.DOI
Jie Yang, Yongfeng Zhu, Dong-Ping Sheng, Rupeng Zhu (2025). Global sensitivity analysis and multi-objective optimization of vibration isolation performance for double-layer casing herringbone planetary gearbox. International Journal of Structural Stability and Dynamics.DOI
Miao-Miao Li, Fan-Xuan Li, Xinyu Sun, Ran Zhou, Rupeng Zhu (2025). Research on effect of stiffness and damping characteristics of smart spring support on vibration characteristics of multi-span shaft system. Journal of Intelligent Materials Systems and Structures.DOI
Zhan-Wei Li, Wenhao Yan, Peng Cao, Ruijun Liang, Rupeng Zhu (2025). Modeling and vibration characteristics analysis of flexible spiral bevel gear system. European Journal of Mechanics. A, Solids.DOI
Chen-Fei Ma, Xiang-Ying Hou, Kai Yang, Zhengminqing Li, Rupeng Zhu (2025). A comparison of the different lubrication characteristics of cylindrical roller bearings between single bearing system and tester system. Advances in Mechanical Engineering.DOI
Xiangying Hou, Linyue Qiu, Zhen Qin, Yan-Kun Yang, Chen-Fei Ma, S. Lyu, Zhengminqing Li, Guanghu Jin, Rupeng Zhu (2025). Vibration evaluation and optimization of coaxial high-speed helicopter main transmission system and its experimental verification. Chinese Journal of Aeronautics.DOI
Zhanwei Li, Jiawei Pan, Peng Jun Cao, Yifan Huangfu, Ruijun Liang, Rupeng Zhu (2025). Effects of Non-Torque Loads on Planetary Gear Systems.DOI
Yu Lan Hu, Weiping Yan, Weixin Yang, Jingjing Wang, Ruijun Liang, Rupeng Zhu, Weifang Chen (2025). Friction status monitoring for gear couplings of helicopter tail drive shaft system via friction system response driven. Measurement.DOI
Yanfeng Zhou, Weifang Chen, Dan Wang, Kaijie Chen, Rupeng Zhu (2025). Optimisation of marine dampers in shock conditions using data-driven methods. Ships and Offshore Structures.DOI
Shuying Yang, Lei Zheng, Jiju Guan, Weifang Chen, Rupeng Zhu (2025). Mechanism-based prediction of helical gear grinding Surface roughness: Integrated modeling of spatial kinematics and abrasive trajectory effects. Precision Engineering.DOI
Donglin Zhang, Rupeng Zhu, Wei Zhang, Ji Cui, Luqiang Ma (2025). Research on power flow of encased differential gear train in coaxial contra-rotating gearbox. Scientific Reports.DOI
Donglin Zhang, Rupeng Zhu, Lifeng Ma (2025). Torsional dynamics and parametric instability in integrated electric drive systems with PMSM and gear train. Journal of Vibroengineering.DOI
Penghang Xu, Weifang Chen, Junling Xie, Xudong Gong, Rupeng Zhu, Yizhong Sun (2025). A novel flexure-based piezoelectric energy conversion unit for bearing vibration ring: theoretical modeling and experiments. Smart Materials and Structures.DOI
Wenzheng Liu, Rupeng Zhu, Zhongmin Xiao (2025). Fault-induced intrinsic morphological signals in gear systems: theory and experiment. Mechanical Systems and Signal Processing.DOI
Jie Yang, Dongping Sheng, Weifang Chen, Rupeng Zhu, Yanjiong Yue (2025). Numerical and experimental investigations on vibration isolation performance of double-layer casing herringbone planetary gearbox. Scientific Reports.DOI
Wenzheng Liu, Rupeng Zhu, Yu Hu, Wenguang Zhou, Weifang Chen (2025). Extracting and identifying essential characteristics of gear pitting and cracks with consideration of fault mechanisms. Structural Health Monitoring.DOI
Yu Hu, Xiaoyu Che, Chao Zhang, Rupeng Zhu, Weifang Chen (2025). GGLCM: A Real-time Early Anomaly Detection Method for Mechanical Vibration Data with Missing Labels. Measurement Science Review.DOI
Wenguang Zhou, Hongmei Wu, Fengxia Lu, Rupeng Zhu, Wenzheng Liu, Jingjing Wang (2025). Analytical modeling and analysis of the equivalent curvature radius and entrainment velocity in orthogonal face gear drives with modified spur gears. Archive of Applied Mechanics.DOI
Liyao Song, Meijun Liao, Weifang Chen, Rupeng Zhu, Dan Wang (2025). Uncertainty Quantification for Nonlinear Vibration of Supercritical Drive Shaft With a Dry Friction Damper. International journal of mechanical system dynamics.DOI
Jingjing Wang, Rupeng Zhu, Wenzheng Liu, Wenguang Zhou (2025). An accurate finite element model for tooth contact and meshing force distribution of crown gear coupling. Journal of Mechanical Science and Technology.DOI
Penghang Xu, Weifang Chen, Rupeng Zhu (2025). Design and modeling of a novel bi-directional piezoelectric damping unit. Smart Materials and Structures.DOI
Yu Hu, Chunlei Wang, Yizhong Sun, Rupeng Zhu, Weifang Chen (2025). Rapid Detection of Rotating Machinery Anomalies Based on Gramian Angular Field With Gray Level Co-Occurrence Matrix. IEEE Access.DOI
Jiani Li, Rupeng Zhu, Xiaocui Li, Fajia Li, Xing Huang, Kaijun Xu (2025). Quantitative Evaluation Method of Civil Turbo Shaft Engine Efficiency Based on Analytical Hierarchy Process. International Journal of Aerospace Engineering.DOI
Ying Wang, Juntao Zhang, Zhan-Wei Li, Rui-Jun Liang, Rupeng Zhu, Hui Ma (2024). Mesh Characteristic Analysis of Spiral Bevel Gear Pairs Considering Assembly Errors and Tooth Tip Chipping Faults. Applied Sciences.DOI
Zhan-Wei Li, Juntao Zhang, Rui-Jun Liang, Rupeng Zhu, Hui Ma, Weimin Ding, Hetao Song, Linqiao Wang (2024). Investigation on meshing characteristics of spiral bevel gear under wear fault evolution with assembly errors. Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology.DOI
Zhan-Wei Li, Zhongming He, Juntao Zhang, Hui Ma, Rupeng Zhu (2024). Mesh characteristic changes of spiral bevel gear pair with assembly errors during tooth crack propagation. Proceedings of the Institution of mechanical engineers. Part C, journal of mechanical engineering science.DOI
Shu-Shen Gao, Xiang-Ying Hou, Chen-Fei Ma, Yan-Kun Yang, Zhengminqing Li, Rui Yin, Rupeng Zhu (2024). Transient Simulation Analysis of Needle Roller Bearing in Oil Jet Lubrication and Planetary Gearbox Lubrication Conditions Based on Computational Fluid Dynamics. Lubricants.DOI
Weixin Yang, Feichun Liu, Tang Xin, Rupeng Zhu (2024). Fast Spectral Kurtosis Technique and its Application for Gearbox Fault Diagnosis. Global Reliability and Prognostics and Health Management Conference (PHM).DOI
Penghang Xu, Dan Wang, Weifang Chen, Rupeng Zhu, Jiawei Ding, Shuying Yang (2024). Simulation and Experiment of a Novel Vibration Reduction Unit Based on Piezoelectric Shunt Damping. Lecture notes in mechanical engineering.DOI
Jingjing Wang, Xiaoyu Che, Wenzheng Liu, Wenguang Zhou, Rupeng Zhu (2024). A study on load sharing characteristics of the planetary gear train system with cracked gears. Engineering Failure Analysis.DOI
Weixin Yang, Feichun Liu, Tang Xin, Rupeng Zhu (2024). Arrangement of Signal Measuring Points of Planetary Gear Transmission Based on Dynamics Simulation. Global Reliability and Prognostics and Health Management Conference (PHM).DOI
Wenguang Zhou, Rupeng Zhu, Fengxia Lu, Wenzheng Liu, Jingjing Wang (2024). A novel time-varying mesh stiffness model for orthogonal face gear drives considering EHL. Industrial Lubrication and Tribology.DOI
Wenguang Zhou, Rupeng Zhu, Wenzheng Liu, Jingjing Wang (2024). A novel analytical model of the tooth pair meshing duration of orthogonal face gears. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
Wenzheng Liu, Rupeng Zhu, Wenguang Zhou, Jingjing Wang (2024). Analysis investigation of the influence of sub-surface shear stress distribution of spur gear. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
Wenzheng Liu, Rupeng Zhu, Wenguang Zhou, Jingjing Wang (2024). Calculation and Analysis of TVMS Considering Profile Shifts and Surface Wear Evolution Process of Spur Gear. Chinese Journal of Mechanical Engineering.DOI
Yu Hu, Wenzheng Liu, Yinji Gu, Su Nong, Rupeng Zhu, Weifang Chen (2024). TEM-SDRF: A Novel Approach for Machinery Fault Diagnosis Amid Dual Imbalances in Fault and Noise Samples. IEEE Sensors Journal.DOI
Wenzheng Liu, Rupeng Zhu, Hu Yu, Wenguang Zhou, Jingjing Wang (2024). Differential Extraction and Experimental Validation of Essential Characteristics in Gear Faults. IEEE Sensors Journal.DOI
Wenguang Zhou, Rupeng Zhu, Wenzheng Liu, Jingjing Wang (2024). Modeling and analysis of elastohydrodynamic lubrication of orthogonal face gear with installation errors. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
Wenzheng Liu, Rupeng Zhu, Wenguang Zhou, Jingjing Wang (2024). Research on feature extraction method for different levels of cracks and pitting in spur gear based on dynamic characteristic templates. Measurement.DOI
Wenguang Zhou, Rupeng Zhu, Zhanwei Li, Wenzheng Liu, Jingjing Wang, Fengjing Mu (2024). Theoretical and experimental research on tooth root bending stress of face gear. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
Haipeng Wang, Chu Zhu, Xingguang Yang, Yinkai Niu, Heyun Bao, Rupeng Zhu (2024). Study on the engagement characteristics of wet multi-plate friction clutch based on separating spring. Forschung im Ingenieurwesen.DOI
Rui-Jun Liang, Wenfeng Ran, Yao Chen, Rupeng Zhu (2023). Fault Diagnosis Method for Rotating Machinery Based on Multi-scale Features. Chinese Journal of Mechanical Engineering.DOI
Linyue Qiu, Xiang-Ying Hou, Shu-Shen Gao, Zhengminqing Li, Rupeng Zhu (2023). Vibration optimization of spur gear based on GSA-SA algorithm. PLoS ONE.DOI
Zhanwei Li, Juntao Zhang, Hansheng Song, Rupeng Zhu, Hui Ma (2023). Time-varying mesh stiffness calculation of spiral bevel gear with spalling defect. Mechanism and Machine Theory.DOI
Weixin Yang, Feichun Liu, Rupeng Zhu (2023). Gearbox Fault Diagnosis Based on the Ratio of Characteristic Energy. Global Reliability and Prognostics and Health Management Conference (PHM).DOI
Weixin Yang, Feichun Liu, Rupeng Zhu (2023). Feature Extraction of Planetary Gear Based on Fast Harmonic Square Envelope Spectral Kurtosis Method. Global Reliability and Prognostics and Health Management Conference (PHM).DOI
Wenzheng Liu, Rupeng Zhu, Xudong Song, Wenguang Zhou, Jingjing Wang (2023). Dynamical modeling of spur gear with pitting based on image processing tooth surface. Structural Health Monitoring.DOI
Fei Gong, Rupeng Zhu, Qibo Wang (2023). Dynamics Modeling and Load-Sharing Performance Optimization of Concentric Face Gear Split-Torque Transmission Systems. Applied Sciences.DOI
Siyu Wang, Rupeng Zhu (2023). Research on dynamics and failure mechanism of herringbone planetary gearbox in wind turbine under gear surface pitting. Engineering Failure Analysis.DOI
Jiang Zhao, Yu Xiaofeng, Wei Sheng, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2022). Effect of Machined Tooth Surface Mixed Lubrication Sliding Wear on Gear Dynamic Characteristics. Machines.DOI
Siyu Wang, Rupeng Zhu (2022). Evaluating the Time-Varying Mesh Stiffness of Planetary Gear Set With Gear Crack Considering the Friction Force Under Mixed Elastohydrodynamic Lubrication Condition. Journal of Tribology.DOI
Liyao Song, Bai Chen, Bo Li, Rupeng Zhu, Dan Wang (2022). Nonlinear vibration response of a helicopter supercritical tail rotor drive shaft equipped with a dry friction damper. Journal of Intelligent Manufacturing and Special Equipment.DOI
Miaomiao Li, Zhao Zhang, Xi Wang, Shuai Liu, Rupeng Zhu (2022). Study on the Tooth Profile Parameters Design Method of Crown Gear Coupling for Helicopter Tail Folding Device. Journal of Engineering.DOI
Jie Yang, Rupeng Zhu, Heow Pueh Lee (2022). Steady-state and dynamic performances of journal bearing based on rough surface reconstruction technology. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
Xiangying Hou, Linyue Qiu, Yuzhe Zhang, Zhengminqing Li, Rupeng Zhu, Sung-Ki Lyu (2022). High-Speed Spiral Bevel GEAR Dynamic Rules Considering the Impact of Web Thicknesses and Angles. Applied Sciences.DOI
Wei Sheng, Jiang Zhao, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2022). Geometric Design of a Face Gear Drive with Low Sliding Ratio. Applied Sciences.DOI
Siyu Wang, Rupeng Zhu (2022). An improved mesh stiffness calculation model for cracked helical gear pair with spatial crack propagation path. Mechanical Systems and Signal Processing.DOI
Siyu Wang, Rupeng Zhu, Zhongmin Xiao (2022). Investigation on crack failure of helical gear system of the gearbox in wind turbine: Mesh stiffness calculation and vibration characteristics recognition. Ocean Engineering.DOI
Jiang Zhao, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2022). Study on Sliding Wear Characteristics of Non-Gaussian Rough Surface in Mixed Lubrication. Tribology Transactions.DOI
Jiang Zhao, Lei Hou, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2022). Prediction of tribological and dynamical behaviors of spur gear pair considering tooth root crack. Engineering Failure Analysis.DOI
Jiang Zhao, Wei Sheng, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2022). Modeling and analysis of sliding wear based on fractal surface reconstruction in line contact mixed lubrication. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
Jiang Zhao, Wei Sheng, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2022). Numerical Simulation of Sliding Wear in Finite Line Contact Mixed Lubrication. Journal of Materials Engineering and Performance.DOI
Jiang Zhao, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2022). Prediction of the tribological characteristics of non‐Gaussian rough surfaces during sliding wear in mixed lubrication. Lubrication Science.DOI
Ruijun Liang, Yao Chen, Rupeng Zhu (2022). A Novel Fault Diagnosis Method Based on the KELM Optimized by Whale Optimization Algorithm. Machines.DOI
Siyu Wang, Rupeng Zhu (2021). Vibration-Based Fault Diagnosis of Helical Gear Pair With Tooth Surface Wear Considering Time-Varying Friction Coefficient Under Mixed Elastohydrodynamic Lubrication Condition. Journal of Tribology.DOI
Jiang Zhao, Zekun Wang, Zhengminqing Li, Rupeng Zhu (2021). Fractal simulation of surface topography and prediction of its lubrication characteristics. Surface Topography Metrology and Properties.DOI
Jiang Zhao, Wei Sheng, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2021). Effect of lubricant selection on the wear characteristics of spur gear under oil-air mixed lubrication. Tribology International.DOI
Jiang Zhao, Wei Sheng, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2021). Study on the Lubrication Characteristics of Spur Gear Pairs With Low Sliding Ratio Under Mixed Elastohydrodynamic Lubrication. Journal of Tribology.DOI
Siyu Wang, Rupeng Zhu (2021). An improved mesh stiffness model of helical gear pair considering axial mesh force and friction force influenced by surface roughness under EHL condition. Applied Mathematical Modelling.DOI
Wenzheng Liu, Rupeng Zhu, Wenguang Zhou, Youwei Shang (2021). Probability distribution model of gear time-varying mesh stiffness with random pitting of tooth surface. Engineering Failure Analysis.DOI
Jiang Zhao, Zekun Wang, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2021). Fractal variation of three-dimensional surface topography during sliding wear under mixed elastohydrodynamic lubrication. Surface Topography Metrology and Properties.DOI
Siyu Wang, Rupeng Zhu (2021). Modeling and Theoretical Investigation of Nonlinear Torsional Characteristics for Double-Helical Star Gearing System in GTF Gearbox. Journal of Vibration Engineering & Technologies.DOI
Jiang Zhao, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2021). Effect of micro-textures on lubrication characteristics of spur gears under 3D line-contact EHL model. Industrial Lubrication and Tribology.DOI
Wenguang Zhou, Rupeng Zhu, Wenzheng Liu, Youwei Shang (2021). An Improved Dynamic Transmission Error Model Applied on Coupling Analysis of Gear Dynamics and Elastohydrodynamic Lubrication. Journal of Tribology.DOI
Xiangying Hou, Yuzhe Zhang, Hong Zhang, Jian Zhang, Zhengminqing Li, Rupeng Zhu (2021). A modified damping model of vector form intrinsic finite element method for high-speed spiral bevel gear dynamic characteristics analysis. The Journal of Strain Analysis for Engineering Design.DOI
Jiang Zhao, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2021). Prediction of Contact and Lubrication Characteristics of Micro-textured Surface Under Thermal Line Contact EHL. Frontiers in Mechanical Engineering.DOI
Wei Sheng, Zhengminqing Li, Hong Zhang, Rupeng Zhu (2021). Geometry and design of spur gear drive associated with low sliding ratio. Advances in Mechanical Engineering.DOI
Fengxia Lu, Meng Wang, Weizhen Liu, Heyun Bao, Rupeng Zhu (2021). CFD-based calculation method of convective heat transfer coefficient of spiral bevel gear in intermediate gearbox under splash lubrication. Industrial Lubrication and Tribology.DOI
Siyu Wang, Rupeng Zhu (2020). An improved mesh stiffness calculation model of spur gear pair under mixed EHL friction with spalling effect. Vibroengineering PROCEDIA.DOI
Siyu Wang, Rupeng Zhu (2020). An improved mesh stiffness model for double-helical gear pair with spalling defects considering time-varying friction coefficient under mixed EHL. Engineering Failure Analysis.DOI
Siyu Wang, Rupeng Zhu (2020). Nonlinear dynamic analysis of GTF gearbox under friction excitation with vibration characteristics recognition and control in frequency domain. Mechanical Systems and Signal Processing.DOI
Siyu Wang, Rupeng Zhu (2020). Theoretical investigation of the improved nonlinear dynamic model for star gearing system in GTF gearbox based on dynamic meshing parameters. Mechanism and Machine Theory.DOI
Siyu Wang, Rupeng Zhu (2020). Nonlinear Torsional Dynamics of Star Gearing Transmission System of GTF Gearbox. Shock and Vibration.DOI
Siyu Wang, Rupeng Zhu, Jin-Feng Jin-Feng (2020). Study on load sharing behavior of coupling gear-rotor-bearing system of GTF aero-engine based on multi-support of rotors. Mechanism and Machine Theory.DOI
Dongping Sheng, Xiaozhen Li, Rupeng Zhu (2019). A Method of Parametric Stability Region Determination for Non-linear Gear Transmission System. Mechanisms and machine science.DOI
Chen Yuan, Rupeng Zhu, Guanghu Jin, Yeping Xiong, Jie Gao, Meijun Liao (2019). A New Mathematical Modeling Method for Four‐Stage Helicopter Main Gearbox and Dynamic Response Optimization. Complexity.DOI
Zengbao Zhu, Longchao Cheng, Rui Xu, Rupeng Zhu (2019). Impacts of Backlash on Nonlinear Dynamic Characteristic of Encased Differential Planetary Gear Train. Shock and Vibration.DOI
Guanghu Jin, Wei Ren, Rupeng Zhu (2018). Influence of torsional stiffness on load sharing coefficient of a power split drive system. MATEC Web of Conferences.DOI
Hao Wang, Zhengminqing Li, Bohan Zhang, Rupeng Zhu (2018). Calculation of static transmission errors associated with thermo-elastic coupling contacts of spur gears. Vibroengineering PROCEDIA.DOI
Guanghu Jin, H. Y. Yang, Rupeng Zhu (2018). Tooth surface friction and its influence on dynamic transmission error of double power input transmission system. Journal of Vibroengineering.DOI
Yuan Chen, Rupeng Zhu, Guanghu Jin, Yeping Xiong (2018). Influence of Shaft Torsional Stiffness on Dynamic Response of Four-Stage Main Transmission System. Mathematical Problems in Engineering.DOI
Heyun Bao, Guanghu Jin, Fengxia Lu, Rupeng Zhu, Xiaozhu Zou (2018). Dynamic analysis of planetary gear train system with double moduli and pressure angles. MATEC Web of Conferences.DOI
Fengxia Lu, Rupeng Zhu, Qiu-ju Fu (2018). Wear depth calculation and influence factor analysis for groove ball bearing. MATEC Web of Conferences.DOI
Zhengminqing Li, Hao Wang, Rupeng Zhu, Wei Ye (2017). Solutions of active vibration suppression associated with web structures on face gear drives. Vibroengineering PROCEDIA.DOI
Zhengminqing Li, Junhui Fan, Rupeng Zhu (2017). Construction of Tooth Modeling Solutions of Face Gear Drives with an Involute Pinion. Iranian Journal of Science and Technology Transactions of Mechanical Engineering.DOI
Bo Peng, Rupeng Zhu, Miaomiao Li, Ziyang Tang (2017). Bending Vibration Suppression of a Flexible Multispan Shaft Using Smart Spring Support. Shock and Vibration.DOI
Yuan Chen, Rupeng Zhu, Guanghu Jin, Yeping Xiong (2017). Tooth Fracture Detection in Spiral Bevel Gears System by Harmonic Response Based on Finite Element Method. Journal of Control Science and Engineering.DOI
Zhengminqing Li, Wei Ye, Zhang Li, Rupeng Zhu (2016). Effect predictions of star pinion geometry phase adjustments on dynamic load sharing behaviors of differential face gear trains. Journal of Vibroengineering.DOI
Zhengminqing Li, Hao Wu, Rupeng Zhu (2016). Constructed solutions of face gear dynamics associated with engagement impact energy decay. Vibroengineering PROCEDIA.DOI
Zhengminqing Li, Jing Wang, Rupeng Zhu (2016). Influence comparisons of two version tooth profile modifications on face gear dynamic behaviors. Journal of Vibroengineering.DOI
Zhengminqing Li, Hongshang Chen, Rupeng Zhu (2016). Study of low-noise face gear drives associated with micro-punch webs. Advances in Mechanical Engineering.DOI
Dongping Sheng, Rupeng Zhu, Guanghu Jin, Fengxia Lu, Heyun Bao (2016). Bifurcation and chaos study on transverse-torsional coupled 2K-H planetary gear train with multiple clearances. Journal of Central South University.DOI
Zhengminqing Li, Shuang Liu, Rupeng Zhu, Xiaodong Xu (2016). Investigations of Dynamic Behaviors of Face Gear Drives Associated with Pinion Dedendum Fatigue Cracks. Shock and Vibration.DOI
He-Yun Bao, Huan Liu, Rupeng Zhu, Feng-Xia Lu, Miao-Miao Li (2015). Research on Tooth Profile Modification of the Herringbone Planetary Gear Train.DOI
Zhengminqing Li, Bei Zhou, Xiaodong Xu, Rupeng Zhu (2015). Differences of dynamic behaviors of face gear drives between time varying and average mesh stiffness. Vibroengineering PROCEDIA.DOI
Zhengminqing Li, Rupeng Zhu (2015). Sensitivity predictions of geometric parameters on engagement impacts of face gear drives. Journal of Vibroengineering.DOI
Dongping Sheng, Rupeng Zhu, Guanghu Jin, Fengxia Lu, Heyun Bao (2015). Dynamic load sharing characteristics and sun gear radial orbits of double-row planetary gear train. Journal of Central South University.DOI
Fengxia Lu, Rupeng Zhu, Haofei Wang, Heyun Bao, Miaomiao Li (2015). Dynamic Characteristics of Double Helical Planetary Gear Train With Tooth Friction.DOI
Rupeng Zhu, Dongping Sheng, Fengxia Lu, Miaomiao Li, Heyun Bao (2015). Modeling and Bifurcation Characteristics of Double Stage Planetary Gear Train With Multiple Clearances.DOI
Dongping Sheng, Rupeng Zhu, Guanghu Jin, Fengxia Lu, Heyun Bao (2015). Dynamic load sharing behavior of transverse-torsional coupled planetary gear train with multiple clearances. Journal of Central South University.DOI
Zhengminqing Li, Hao Wu, Rupeng Zhu (2015). Influence predictions of geometric parameters on face gear strength. Advances in Mechanical Engineering.DOI
Zhengminqing Li, Xinsheng Liu, Rupeng Zhu (2015). Comparison of dynamic behaviors and strength among three versions of face gear drives with high contact ratios. Journal of Vibroengineering.DOI
Zhengminqing Li, Hongshang Chen, Jiansong Chen, Rupeng Zhu (2014). Analytical impact of the sliding friction on mesh stiffness of spur gear drives based on Ishikawa model. Vibroengineering PROCEDIA.DOI
Ni De, Rupeng Zhu, Fengxia Lu, Heyun Bao, Qiu-ju Fu (2014). Vibration transmissibility characteristics of smart spring vibration isolation system. Journal of Central South University.DOI
Tongjie Li, Rupeng Zhu (2014). Global Analysis of a Planetary Gear Train. Shock and Vibration.DOI
Ni De, Rupeng Zhu, Heyun Bao, Fengxia Lu, Qiu-ju Fu (2012). Influence of damping ratios on the dynamical characteristics of vibration isolation system based on Smart Spring Mechanism. International Conference on System science, Engineering design and Manufacturing informatization.DOI
Tongjie Li, Rupeng Zhu, Heyun Bao, Changle Xiang (2012). Stability of motion state and bifurcation properties of planetary gear train. Journal of Central South University.DOI
Keke Zhu, Rupeng Zhu (2008). An analytic solution to asymmetrical bending problem of diaphragm coupling. Applied Mathematics and Mechanics.DOI
Rupeng Zhu (2008). An Analytic Solution of Stress and Strain of Diaphragm Coupling under Pure Torsion. Journal of Hunan University.
Rupeng Zhu (2008). Analysis of Flexural Resonance of Drive Shaft with Rigid Multi-supports and Optimization Design of Multi-supports. Machine Building & Automation.
Rupeng Zhu (2008). 3D Gear Fracture Numerical Analysis and Simulation of Expansion. Machine Building & Automation.
Rupeng Zhu (2008). Parameterized Modeling of Planetary Gears Based on APDL. Mechanical Engineer.
Rupeng Zhu (2007). The Analysis of Elastohydrodynamics Lubrication in Face Gear. Mechanical Engineer.
Rupeng Zhu (2007). The Generation of Face-Gear Drive with Helical Pinion. Mechanical Engineer.
Rupeng Zhu (2007). Bending Vibration Analysis of Composite Transmission Shaft. Journal of Southwest Jiaotong University.
Rupeng Zhu (2007). Research on Generating Conjugate Shapes Using Cubic Spline Functions. Mechanical Engineer.
Rupeng Zhu (2007). Torsional Vibration Analysis for a Helicopter Tail Drive System. Acta Aeronautica Et Astronautica Sinica.
顾浩，朱如鹏（2006）. 基于有限元法的齿轮齿根裂纹参数计算. 《机械工程师》.
Rupeng Zhu (2006). Floating displacement static analysis of basic floating part of 2-stage star gear train. Journal of Central South University(Science and Technology).
Rupeng Zhu (2006). Bifurcation Analysis of Main Resonance for a Helicopter Drive Shaft with Elastic Multi-Supports. Journal of Aerospace Power.
Shuying Yang, Lei ZHENG, Yifei Ding, Weifang Chen, Rupeng Zhu (2026). A predictive grinding force model for helical gear form grinding considering spatial geometric and kinematic characteristics. Research Square.DOI
Yu Hu, Yan Wei-ping, Wenzheng Liu, Zhanwei Li, Yudong Cao, Weifang Chen, Rupeng Zhu (2026). Braiding asynchronous vibration and acoustic-emission streams via directed gated cross-modal fusion for mechanical system degradation prognostic. SSRN Electronic Journal.DOI
Hu Yu, Weiping Yan, Junling Xie, Yudong Cao, Wenguang Zhou, Qizhi Wan, Rupeng Zhu, Weifang Chen (2025). A Riemannian-Hyperbolic Space-Based Algorithm for Multisensor Data Fusion in Spline Degradation Monitoring. SSRN Electronic Journal.DOI
书籍章节
Mianchang Li, D. Ni, Wencao Wu, Rupeng Zhu, Shuaiqiang Li (2018). Study on the Vibration Reduction Performance of Smart Springs. Lecture notes in mechanical engineering.DOI
Rupeng Zhu, Dongping Sheng, Guanghu Jin, Fengxia Lu, Heyun Bao, Miaomiao Li (2014). Study on Dynamic Load Sharing Characteristics of Double-Row Planetary Gear Train. Mechanisms and machine science.DOI