董苯思｜北京航空航天大学｜学者主页

2026

Analytical Investigation on Heat Conduction Performance of Anisotropic Annular Fin

Xin Li, Qihang Liu, Jie Wen, Bensi Dong, Laihe Zhuang, Z Liu

Lecture notes in mechanical engineering

DOI

2026

Superiority of Secondary Bypass Air in an Integrated Thermal Management System: A Multi-Level Simulation Study

Jie Wen, Mengchen Li, Guoqiang Xu, Bensi Dong, Zhiwei Liu, Lei Chen, Laihe Zhuang

Engineering

DOI

2026

A new analytical method for thermal performance prediction of multi-pass serpentine tube heat exchangers

Zhiwei Liu, Guoqiang Xu, Jie Wen, Bensi Dong, Laihe Zhuang

Case Studies in Thermal Engineering

DOI

2025

再生冷却并联通道流动与换热特性研究（英文）

琚印超，刘小勇，徐国强，董苯思

《推进技术》

DOI

2025

各向异性材料针形翅片导热性能解析方法

刘志伟，徐国强，闻洁，董苯思，周雷，庄来鹤

《航空动力学报》

DOI

2025

A unified design model for aeroengine intercoolers integrating compressible aerodynamics and supercritical coolant thermodynamics

Yuan Qin, Jie Wen, Guoqiang Xu, Bensi Dong, Zhiwei Liu, Laihe Zhuang

International Communications in Heat and Mass Transfer

DOI

2025

Experimental investigation and modeling of airside heat transfer characteristics based on dual-working-fluid for microchannel finned air-oil heat exchanger

Huifang Ma, Jie Wen, Guoqiang Xu, Bensi Dong, Zhiwei Liu, Xitong Wang, Laihe Zhuang

International Journal of Heat and Mass Transfer

DOI

2025

Experimental and numerical analysis of airside thermal-hydraulic characteristics of small-diameter tube bundle under compressible flow conditions

Jie Wen, Yuan Qin, Guoqiang Xu, Zhiwei Liu, Bensi Dong, Siqi Wu, Laihe Zhuang

International Communications in Heat and Mass Transfer

DOI

2025

Anisotropic heat conduction in composite rectangular fins: A theoretical analysis and optimal design

Zhiwei Liu, Guoqiang Xu, Bensi Dong, Jie Wen, Laihe Zhuang

International Communications in Heat and Mass Transfer

DOI

2025

Experimental and numerical study on the thermal and hydraulic characteristics of an improved PCHE with high-viscosity fluid

Jie Wen, Huifang Ma, Guoqiang Xu, Bensi Dong, Zhiwei Liu, Lai-He Zhuang

Applied Thermal Engineering

DOI

2024

局部进气裂解油气向心涡轮气动性能分析

王永杰，徐国强，于喜奎，董苯思

《推进技术》

2024

局部进气裂解油气向心涡轮气动设计与轴向力分析

王永杰，徐国强，于喜奎，董苯思

《航空动力学报》

2024

Optimization of thermal management system architecture in hydrogen engine employing improved genetic algorithm

Jie Wen, Chen-Xi Wan, Guo-Qiang Xu, Lai-He Zhuang, Bensi Dong, Junjie Chen

Energy

DOI

2024

Explicit Calculation Method for Heat Exchanger Considering Variable Physical Property Treatment

Z.-W. Liu, Q.-H. Liu, J. Wen, Bensi Dong

Journal of Physics, Conference Series

DOI

2023

紧凑翅片管式空气-燃油换热器试验

刘启航，闻洁，吕璐璐，刘银龙，庄来鹤，董苯思

《航空动力学报》

2023

Numerical and correlation analysis of conjugate heat transfer over the discrete braided composites plate

Guoqiang Xu, Jiawei Fang, Bensi Dong

International Journal of Heat and Mass Transfer

DOI

2023

Design and analysis of an axial turbine for high-temperature organic Rankine cycle

Bensi Dong, Yongjie Wang, Guoqiang Xu, Jie Wen, Yongkai Quan

Thermal Science and Engineering Progress

DOI

2023

Improved unit cells to predict anisotropic thermal conductivity of three-dimensional four-directional braided composites by Monte-Carlo method

Jiawei Fang, Yongkai Quan, Bensi Dong

International Journal of Heat and Mass Transfer

DOI

2023

Design and optimization of a radial-axial two-stage coaxial turbine for high-temperature supercritical organic Rankine cycle

Guoqiang Xu, Guanglong Zhao, Yongkai Quan, Runzi Liang, Tingting Li, Bensi Dong, Jian Fu

Applied Thermal Engineering

DOI

2022

基于典型飞行任务的CCA技术优势分析

庄来鹤，徐国强，闻洁，董苯思，肖翼

《航空动力学报》

2022

Study on performance and mechanisms of a novel integrated model with Power & Thermal Management system and turbofan engine

Laihe Zhuang, Guoqiang Xu, Bensi Dong, Qihang Liu, Congcong Huang, Jie Wen

Applied Thermal Engineering

DOI

2022

Exergetic Effects of Cooled Cooling Air Technology on the Turbofan Engine during a Typical Mission

Laihe Zhuang, Guoqiang Xu, Bensi Dong, Qihang Liu, Mengchen Li, Jie Wen

Energies

DOI

2022

Thermodynamic Optimization of Aircraft Environmental Control System Using Modified Genetic Algorithm

Qihang Liu, Laihe Zhuang, Jie Wen, Bensi Dong, Zhiwei Liu

Processes

DOI

2022

Superiority analysis of the cooled cooling air technology for low bypass ratio aero-engine under typical flight mission

Laihe Zhuang, Guoqiang Xu, Qihang Liu, Mengchen Li, Bensi Dong, Jie Wen

Energy Conversion and Management

DOI

2022

Experimental and numerical investigation of the effects of buoyancy and flow acceleration on the heat transfer of hexamethyldisiloxane (MM) at supercritical pressures

Guoqiang Xu, Yinchao Ju, Wei Min Gao, Jian Fu, Bensi Dong

International Journal of Heat and Mass Transfer

DOI

2022

An Explicit Design Method for Heat Exchanger Based on Logarithmic Mean Temperature Difference (Lmtd) Method

Qi-Hang Liu, Guoqiang Xu, Lai-He Zhuang, Jie Wen, Bensi Dong

Social Science Research Network

DOI

2022

Effect of windage heating on a micro high-speed rotor-stator cavity

Jian-Yu Liu, Guoqiang Xu, Xi Zhao, Bensi Dong, Yongkai Quan

Propulsion and Power Research

DOI

2021

Multivariate Design and Analysis of Aircraft Heat Exchanger Under Multiple Working Conditions Within Flight Envelope

Qihang Liu, Guoqiang Xu, Jie Wen, Yanchen Fu, Laihe Zhuang, Bensi Dong

Journal of Thermal Science and Engineering Applications

DOI

2020

超临界压力硅油MM竖直管内对流传热实验研究

付建，全永凯，董苯思

《工程热物理学报》

2020

Numerical investigation on the flow and heat transfer for a millimeter-scale rotor-stator system with ultrahigh rotational speed

Yongkai Quan, Jianyu Liu, Guoqiang Xu, Bingqing Qiu, Bensi Dong

International Journal of Thermal Sciences

DOI

2020

Optimization design with an advanced genetic algorithm for a compact air-air heat exchanger applied in aero engine

Guoqiang Xu, Laihe Zhuang, Bensi Dong, Qihang Liu, Jie Wen

International Journal of Heat and Mass Transfer

DOI

2020

Experimental investigation on heat transfer characteristics of hexamethyldisiloxane (MM) at supercritical pressures for medium/high temperature ORC applications

Guoqiang Xu, Jian Fu, Yongkai Quan, Jie Wen, Bensi Dong

International Journal of Heat and Mass Transfer

DOI

2020

Performance evaluation of a novel re-cooled mixed-flow turbofan cycle for aviation power application

Guoqiang Xu, Jingchuan Sun, Jie Wen, Bensi Dong, Laihe Zhuang, Qihang Liu

Journal of Thermal Analysis and Calorimetry

DOI

2019

Aerodynamic design of an axial impulse turbine for the high-temperature organic Rankine cycle

Yongkai Quan, Jianyu Liu, Cuizhen Zhang, Jie Wen, Guoqiang Xu, Bensi Dong

Applied Thermal Engineering

DOI

2019

Performance Analysis of a Novel Parallel Turbine Reheat Cycle for High Speed Vehicles

Jingchuan Sun, Guoqiang Xu, Jie Wen, Bensi Dong, Laihe Zhuang, Qihang Liu

DOI

2019

Influence of Overweight Acceleration on Heat Transfer of Hydrocarbon Fuel in a Vertical Tube at Supercritical Pressures

Lulu Lv, Yanchen Fu, Bensi Dong, Jie Wen, Guoqiang Xu

ASME Heat Transfer Summer Conference (HT)

DOI

2019

A Novel Approach of Designing Aircraft Heat Exchanger for Continuous Working Conditions Using Modified Genetic Algorithm

Qihang Liu, Laihe Zhuang, Yanchen Fu, Bensi Dong, Jie Wen, Guoqiang Xu

ASME Heat Transfer Summer Conference (HT)

DOI

2019

Multi‐objective optimization design of plate‐fin vapor generator for supercritical organic Rankine cycle

Guoqiang Xu, Pengju Zhu, Yongkai Quan, Bensi Dong, Ruifan Jin

International Journal of Energy Research

DOI

2018

Numerical Investigation of Velocity Coefficient for Organic Turbine Nozzles Using MM As Working Fluid

Laihe Zhuang, Guoqiang Xu, Jie Wen, Bensi Dong

DOI

2018

Numerical Analysis of Heat Transfer Characteristics of Hexamethyldisiloxane (MM) at Supercritical Pressures

Jian Fu, Guoqiang Xu, Yongkai Quan, Yanchen Fu, Bensi Dong

DOI

2017

Thermodynamic and economic analysis of zeotropic mixtures as working fluids in low temperature organic Rankine cycles

Bensi Dong, Guoqiang Xu, Tingting Li, Yongkai Quan, Jie Wen

Applied Thermal Engineering

DOI

2017

Numerical prediction of velocity coefficient for a radial-inflow turbine stator using R123 as working fluid

Bensi Dong, Guoqiang Xu, Tingting Li, Yongkai Quan, Lijing Zhai, Jie Wen

Applied Thermal Engineering

DOI

2017

Parametric analysis of organic Rankine cycle based on a radial turbine for low-grade waste heat recovery

Bensi Dong, Guoqiang Xu, Tingting Li, Xianglong Luo, Yongkai Quan

Applied Thermal Engineering

DOI

2017

Numerical analysis of the axial heat conduction with variable fluid properties in a forced laminar flow tube

Lijing Zhai, Guoqiang Xu, Yongkai Quan, Gu Quan Song, Bensi Dong, Hongwei Wu

International Journal of Heat and Mass Transfer

DOI

2017

Potential of Low Temperature Organic Rankine Cycle with Zeotropic Mixtures as Working Fluid

Bensi Dong, Guoqiang Xu, Xianglong Luo, Laihe Zhuang, Yongkai Quan

Energy Procedia

DOI

2017

Analysis of the supercritical organic Rankine cycle and the radial turbine design for high temperature applications

Bensi Dong, Guoqiang Xu, Xianglong Luo, Laihe Zhuang, Yongkai Quan

Applied Thermal Engineering

DOI

2014

Analysis of zeotropic mixtures used in high-temperature Organic Rankine cycle

Bensi Dong, Guoqiang Xu, Yi Cai, Haiwang Li

Energy Conversion and Management

DOI

精选作品

期刊论文

Analytical Investigation on Heat Conduction Performance of Anisotropic Annular Fin

Superiority of Secondary Bypass Air in an Integrated Thermal Management System: A Multi-Level Simulation Study

A new analytical method for thermal performance prediction of multi-pass serpentine tube heat exchangers

再生冷却并联通道流动与换热特性研究（英文）

各向异性材料针形翅片导热性能解析方法

A unified design model for aeroengine intercoolers integrating compressible aerodynamics and supercritical coolant thermodynamics

Experimental investigation and modeling of airside heat transfer characteristics based on dual-working-fluid for microchannel finned air-oil heat exchanger

Experimental and numerical analysis of airside thermal-hydraulic characteristics of small-diameter tube bundle under compressible flow conditions

Anisotropic heat conduction in composite rectangular fins: A theoretical analysis and optimal design

Experimental and numerical study on the thermal and hydraulic characteristics of an improved PCHE with high-viscosity fluid

局部进气裂解油气向心涡轮气动性能分析

局部进气裂解油气向心涡轮气动设计与轴向力分析

Optimization of thermal management system architecture in hydrogen engine employing improved genetic algorithm

Explicit Calculation Method for Heat Exchanger Considering Variable Physical Property Treatment

紧凑翅片管式空气-燃油换热器试验

Numerical and correlation analysis of conjugate heat transfer over the discrete braided composites plate

Design and analysis of an axial turbine for high-temperature organic Rankine cycle

Improved unit cells to predict anisotropic thermal conductivity of three-dimensional four-directional braided composites by Monte-Carlo method

Design and optimization of a radial-axial two-stage coaxial turbine for high-temperature supercritical organic Rankine cycle

基于典型飞行任务的CCA技术优势分析

Study on performance and mechanisms of a novel integrated model with Power & Thermal Management system and turbofan engine

Exergetic Effects of Cooled Cooling Air Technology on the Turbofan Engine during a Typical Mission

Thermodynamic Optimization of Aircraft Environmental Control System Using Modified Genetic Algorithm

Superiority analysis of the cooled cooling air technology for low bypass ratio aero-engine under typical flight mission

Experimental and numerical investigation of the effects of buoyancy and flow acceleration on the heat transfer of hexamethyldisiloxane (MM) at supercritical pressures

An Explicit Design Method for Heat Exchanger Based on Logarithmic Mean Temperature Difference (Lmtd) Method

Effect of windage heating on a micro high-speed rotor-stator cavity

Multivariate Design and Analysis of Aircraft Heat Exchanger Under Multiple Working Conditions Within Flight Envelope

超临界压力硅油MM竖直管内对流传热实验研究

Numerical investigation on the flow and heat transfer for a millimeter-scale rotor-stator system with ultrahigh rotational speed

Optimization design with an advanced genetic algorithm for a compact air-air heat exchanger applied in aero engine

Experimental investigation on heat transfer characteristics of hexamethyldisiloxane (MM) at supercritical pressures for medium/high temperature ORC applications

Performance evaluation of a novel re-cooled mixed-flow turbofan cycle for aviation power application

Aerodynamic design of an axial impulse turbine for the high-temperature organic Rankine cycle

Performance Analysis of a Novel Parallel Turbine Reheat Cycle for High Speed Vehicles

Influence of Overweight Acceleration on Heat Transfer of Hydrocarbon Fuel in a Vertical Tube at Supercritical Pressures

A Novel Approach of Designing Aircraft Heat Exchanger for Continuous Working Conditions Using Modified Genetic Algorithm

Multi‐objective optimization design of plate‐fin vapor generator for supercritical organic Rankine cycle

Numerical Investigation of Velocity Coefficient for Organic Turbine Nozzles Using MM As Working Fluid

Numerical Analysis of Heat Transfer Characteristics of Hexamethyldisiloxane (MM) at Supercritical Pressures

Thermodynamic and economic analysis of zeotropic mixtures as working fluids in low temperature organic Rankine cycles

Numerical prediction of velocity coefficient for a radial-inflow turbine stator using R123 as working fluid

Parametric analysis of organic Rankine cycle based on a radial turbine for low-grade waste heat recovery

Numerical analysis of the axial heat conduction with variable fluid properties in a forced laminar flow tube

Potential of Low Temperature Organic Rankine Cycle with Zeotropic Mixtures as Working Fluid

Analysis of the supercritical organic Rankine cycle and the radial turbine design for high temperature applications

Analysis of zeotropic mixtures used in high-temperature Organic Rankine cycle

书籍章节

Study on Heat Transfer and Flow Resistance Characteristics of Typical Heat Exchanger Tube Based on Adaptive Heat Transfer Enhancement Method

研究方向