李元元

2026

二水合硫酸钙多孔复合热化学储热材料的制备及热性能研究

《储能科学与技术》

DOI

2021

Revealing dehydrogenation effect and resultant densification mechanism during pressureless sintering of TiH2 powder

DOI

2021

Influence of discharge plasma modification on physical properties and resultant densification mechanism of spherical titanium powder

DOI

2020

Premature failure of an additively manufactured material

NPG Asia Materials

DOI

2019

Corrosion mechanism of the as-cast and as-extruded biodegradable Mg-3.0Gd-2.7Zn-0.4Zr-0.1Mn alloys.

Materials Science and Engineering C: Materials for Biological Applications

DOI

2018

Evolution of the microstructure and fracture characteristics of a Mg-Nd-Zn-Zr-Mn alloy through heat treatment and extrusion

Journal of Alloys and Compounds

DOI

2018

Influence of In content on physical properties of β-type TiNbZrIn powders prepared by mechanical alloying

DOI

2018

Effect of Si addition and applied pressure on microstructure and tensile properties of as-cast Al-5.0Cu-0.6Mn-1.2Fe alloys

Transactions of Nonferrous Metals Society of China

DOI

2017

Fabrication of Novel Bimodal Titanium Alloy with High-Strength and Large-Ductility by Semi-Solid Sintering

DOI

2017

High-volume SiCp/ Al and bismuthate glass composite materials and preparation method thereof

2017

Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering

DOI

2016

Influence of Pre‐Solution Treatment on Microstructure and Mechanical Properties of Mg–Gd–Nd–Zn–Zr Alloy Processed by ECAP

DOI

2016

Mechanical and corrosion properties of Mg-Gd-Zn-Zr-Mn biodegradable alloy by hot extrusion

DOI

2015

KF-KCl/SiO2复合材料的制备与储热性能表征

《储能科学与技术》

2015

Abrasion wear behavior of WC–10Ni3Al cermet with plate-like triangular prismatic WC grains

DOI

2015

Effects of metallic Ti particles on the aging behavior and the influenced mechanical properties of squeeze-cast (SiCp+Ti)/7075Al hybrid composites

DOI

2015

Microstructure evolution and mechanical properties of a submerged friction-stir-processed AZ91 magnesium alloy

Journal of Materials Science

DOI

2015

Wear mechanisms of WC–10Ni3Al carbide tool in dry turning of Ti6Al4V

DOI

2015

Fabrication, characterization, and mechanical properties of 93W–4.9Ni–2.1Fe/95W–2.8Ni–1.2Fe–1Al2O3 heavy alloy composites

DOI

2015

Synthesis and characterization of quarternary Ti3Si(1−x)AlxC2 MAX phase materials

DOI

2015

Solid-state transformation of Fe-rich intermetallic phases in Al–5.0Cu–0.6Mn squeeze cast alloy with variable Fe contents during solution heat treatment

DOI

2015

Low cycle fatigue behavior of T4-treated Al–Zn–Mg–Cu alloys prepared by squeeze casting and gravity die casting

DOI

2015

Serrated Flow Behavior of Titanium‐Based Composites with Different In Situ TiC Contents

DOI

2015

Erosion of Cu–Ti3SiC2 composite under vacuum arc

DOI

2015

Formation of Fe-rich intermetallic compounds and their effect on the tensile properties of squeeze-cast Al–Cu alloys

DOI

2015

Microstructures and tensile properties of submerged friction stir processed AZ91 magnesium alloy

DOI

2015

挤压铸造和重力铸造T4态Al-Zn-Mg-Cu合金的低周疲劳行为（英文）

Transactions of Nonferrous Metals Society of China

2015

Examination of Electrical Conduction of Carbonyl Iron Powder Compacts

DOI

2014

四元碳酸盐相变储热材料的制备及热物性研究

《化工新型材料》

2014

Preparation of SiC reinforced Ti3SiC2-base composite and its biocompatibility evaluation

DOI

2014

Microstructures and Mechanical Properties of a Squeeze-Casted Al-Zn-Mg-Cu Alloy after Heat Treatment

DOI

2014

93W-5.6Ni-1.4Fe高比重合金放电等离子主烧结曲线的建立 *

DOI

2014

Comparative study on microstructures and mechanical properties of the heat-treated Al–5.0Cu–0.6Mn–xFe alloys prepared by gravity die casting and squeeze casting

DOI

2014

New Developments of Ti-Based Alloys for Biomedical Applications

Materials

DOI

2014

Effect of rotation speeds on microstructures and tensile properties of submerged friction stir processed AZ31 magnesium alloy

DOI

2014

浇注温度和固溶温度对挤压铸造Al-6.8Zn-2.5Mg-2.0Cu合金组织和性能的影响

《特种铸造及有色合金》

2014

Effects of particle size and properties on the microstructures, mechanical properties, and fracture mechanisms of 7075Al hybrid composites prepared by squeeze casting

Journal of Materials Science

DOI

2014

3D (Three Dimensional) forming method for large-sized porous amorphous alloy part of complex shape

2014

Erosion craters on Ti3SiC2 anode

DOI

2014

Zirconia-toughened WC with/without VC and Cr3C2

DOI

2014

(SiCp+Ti)/7075Al hybrid composites with high strength and large plasticity fabricated by squeeze casting

DOI

2014

Microstructure evolution during high strain rate tensile deformation of a fine-grained AZ91 magnesium alloy

DOI

2014

Reciprocating wear behavior of WC–10Ni3Al cermet in contact with Ti6Al4V

DOI

2014

Effects of Alloy Composition on Microstructure and Mechanical Properties of Iron-Based Materials Fabricated by Ball Milling and Spark Plasma Sintering

Metallurgical and Materials Transactions. A

DOI

2014

Unusual dry sliding tribological behavior of biomedical ultrafine-grained TiNbZrTaFe composites fabricated by powder metallurgy

DOI

2014

Effect of Thermal History on Microstructures and Mechanical Properties of AZ31 Magnesium Alloy Prepared by Friction Stir Processing

Materials

DOI

2013

The influence of premolding load on the electrical behavior in the initial stage of electric current activated sintering of carbonyl iron powders

DOI

2013

Fine-grained 93W-5.6Ni-1.4Fe heavy alloys with enhanced performance prepared by spark plasma sintering

DOI

2013

Equiaxed grained structure: A structure in titanium alloys with higher compressive mechanical properties

DOI

2013

Microstructure and mechanical properties of Al-5.0Cu-0.6Mn-0.5Fe alloy prepared by squeeze casting

2013

High strain rate superplasticity of a fine-grained AZ91 magnesium alloy prepared by submerged friction stir processing

DOI

2013

Effect of sintering temperature on the preparation of Cu–Ti3SiC2 metal matrix composite

DOI

2013

Effect of Heating Rate on Densification and Grain Growth During Spark Plasma Sintering of 93W-5.6Ni-1.4Fe Heavy Alloys

Metallurgical and Materials Transactions. A

DOI

2013

High-strength Ti–6Al–4V with ultrafine-grained structure fabricated by high energy ball milling and spark plasma sintering

DOI

2013

Research on Characteristics of Heat Treatment of Squeeze Cast Al-Cu-Mg Alloy

DOI

2013

In-situ elongated β-Si3N4 grains toughened WC composites prepared by one/two-step spark plasma sintering

DOI

2013

Erosion behaviour of a Ti3SiC2 cathode under low-current vacuum arc

DOI

2013

Spark-Plasma Sintering of W-5.6Ni-1.4Fe Heavy Alloys: Densification and Grain Growth

Metallurgical and Materials Transactions. A

DOI

2013

ZrO2 (3Y) toughened WC composites prepared by spark plasma sintering

DOI

2013

Microstructures and mechanical properties of heat-treated Al–5.0Cu–0.5Fe squeeze cast alloys with different Mn/Fe ratio

DOI

2013

Solidification of Iron‐Rich Intermetallics in Squeeze cast Al‐5.0Cu‐0.5 Fe Alloys with Different Mn/Fe Ratio

DOI

2013

Cr3C2 and VC doped WC–Si3N4 composites prepared by spark plasma sintering

DOI

2013

Impact of Temperature Control on the Dynamic Clearance of the Injection System of Squeeze Casting Machine

DOI

2013

Microstructures and mechanical properties of squeeze cast Al–5.0Cu–0.6Mn alloys with different Fe content

DOI

2013

Effects of Mn content on microstructures and mechanical properties of Al-5.0Cu-0.5Fe alloys prepared by squeeze casting

DOI

2012

挤压铸造高强韧Al-5.0Cu-0.4Mn合金的组织与性能

《铸造技术》

2012

Effect of solution treatment on microstructure and mechanical properties of 7075/6009 aluminum laminated composites

2012

Trace cobalt-containing tungsten carbide without bonding phase and preparation method thereof

2012

Bulk WC–Al2O3 composites prepared by spark plasma sintering

DOI

2012

Effects of sintering temperature on microstructure and property evolution of Fe81Cu2Nb3Si14 soft magnetic materials fabricated from amorphous melt-spun ribbons by spark plasma sintering technique

DOI

2012

Microstructure and Property of High Strength-ductility Al-5.0Cu-0.4Mn Alloys Prepared by Squeeze Casting

2012

Macrostructure Characteristics and Macroscopic Segregation of Cu-17Ni-3Al-X Alloy Castings by Centrifugal Casting

2012

Effect of Process Parameters on Microstructures of Squeeze Casting Al-4.80%Cu-0.44%Mn Alloy

2012

Formation of Fe–Nb–X (X=Zr, Ti) amorphous alloys from pure metal elements by mechanical alloying

DOI

2012

Microstructure evolution and thermal properties in FeMoPCB alloy during mechanical alloying

DOI

2012

Relationship between microstructure and Brinell hardness of nickel-aluminum bronze by quantitative metallography analysis

2012

Cu-17Ni-3Al-X合金在中性盐雾中的腐蚀行为

《中国有色金属学报》

2012

Impurity control in pressureless reactive synthesis of pure Ti3SiC2 bulk from elemental powders

DOI

2012

Fabrication of Ultrafine-Grained Ti66Nb18Cu6.4Ni6.1Al3.5 Composites with High Strength and Distinct Plasticity by Spark Plasma Sintering and Crystallization of Amorphous Phase

DOI

2012

Authigenic silicon nitride crystal whisker toughening tungsten carbide composite material and preparation method thereof

2012

Heat Treatment Process for 7075/6009 Aluminum Alloy Laminated Composite Plate

2012

Macrosegregation in squeeze-cast Al5Cu0.4Mn alloy based on Taguchi method

2012

Corrosion behavior of Cu-17Ni-3Al-X alloy in neutral salt atmosphere

2012

离心铸造Cu-17Ni-3Al-X合金铸件的组织特征和宏观偏析

《热加工工艺》

2011

Fabrication of Ti66V13Cu8Ni6.8Al6.2 Bulk Composites with High Strength by Spark Plasma Sintering and Crystallization of Amorphous Phase

DOI

2011

Comparation of Corrosion Behavior of Two Kinds of Aluminum Bronze in Neutral Salt Spray

2011

Effects of Pouring Temperature on Interface Bonding Properties of Cu/Ni Water Jacket Material

2011

Fabrication of crystallized Ti_(70)Nb_(7.8)Cu_(8.4)Ni(7.2)Al_(6.6) composites by spark plasma sintering or crystallization of amorphous phase

2011

Microstructure and mechanical properties of ZK60 magnesium alloy processed by T-shape channel pressing

2011

Interfacial Stability of a Spark Plasma Sintered Mo-Ti3SiC2 Layered Composite

DOI

2011

Effects of Minor B4C or C on Amorphous Ti66Nb13Cu8Ni6.8Al6.2 Alloy Powders Synthesized by Mechanical Alloying

DOI

2011

Progress in Technology of Squeeze Casting for Metal Materials

2011

Influence of high-energy ball milling on structure and performance of Cu-10Cr-0.5Al_2O_3

2011

多元Cu-Ni-Al合金的耐磨性能研究

《热加工工艺》

2011

Tungsten carbide composite material comprising aluminium oxide particles and silicon nitride whiskers and preparation process thereof

2011

Mechanical properties of ultrafine grained iron-based alloy produced by spark plasma sintering

2011

高能球磨工艺对Cu-10Cr-0.5Al2O3组织与性能的影响

《中国有色金属学报》

2011

Densification and microstructure evolution during SPS consolidation process in W-Ni-Fe system

DOI

2011

A multi-field coupled FEM model for one-step-forming process of spark plasma sintering considering local densification of powder material

Journal of Materials Science

DOI

2011

Research Progress on Preparing Ti-based Biomedical Materials by Powder Metallurgy

2011

Tungsten carbide particle-enhanced iron-based powder metallurgy material and preparation method thereof

2011

Fabrication of hydrophobic/super-hydrophobic nanofilms on magnesium alloys by polymer plating

DOI

2011

SPS densification behavior of W-5.6Ni-1.4Fe heavy alloy powders

DOI

2011

Preparation of super-hydrophobic duplex-treated film on surface of Mg-Mn-Ce magnesium alloy and its corrosion resistance

2011

Influence of Si content on(1-x)Ti_3SiC_2+xSiC composites prepared by spark plasma sintering

2011

High Temperature Stability of SiC/Ti Interface

DOI

2011

Titanium-based bulk amorphous composite material and its preparation method

2011

Study on Wear Resistant Behavior of Multicomponent Cu-Ni-Al Alloy

2011

Duplex surface modification combined with micro-arc oxidation and polymer plating on AZ31 magnesium alloy and their functional properties

2010

放电等离子烧结时间对高密度W-7Ni-3Fe合金组织性能的影响

《材料热处理学报》

DOI

2010

Polymer Plating on Surface of Magnesium Alloy and Functional Characteristics of Nano Film

2010

Improved Model and 3D Simulation of Densification Process for Iron Powder

DOI

2010

Progress of Research on Preparation of Bulk Amorphous Alloys by Powder Metallurgy

2010

Microstructure of Ti/(1-x)Ti_3SiC_2+xSiC layered composite sintered by spark plasma

2010

Effect of microstructure on the mechanical and corrosion behaviors of a hot-extruded nickel aluminum bronze

DOI

2010

Simulation of random mixed packing of different density particles

DOI

2010

A STUDY ON FABRICATION AND SINTERING PROCESS OF CROSS-SHAPED PART FORMED BY WARM FLOW COMPACTION

2010

The stamping formability of AZ31 magnesium alloy sheet improved by equal-channel angular pressing

DOI

2010

Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering

DOI

2010

High Plastic Ti66Nb13Cu8Ni6.8Al6.2 Composites with In Situ β-Ti Phase Synthesized by Spark Plasma Sintering of Mechanically Alloyed Glassy Powders

DOI

2010

挤压铸造Al-6.8Zn-2.6Mg-2.3Cu的组织和性能

《特种铸造及有色合金》

2010

Friction and Wear Properties of High Alloy Tool Steel HGSF01 Produced by Spray Forming

2010

Effects of Cooling Rate and Carbon Content on Microstructure and Mechanical Properties of Fe-Cu-Ni-Mo-C Sintered Materials

2010

Friction and Wear Behaviour of Brake Pads Dry Sliding Against Semi-Interpenetrating Network Ceramics/Al-alloy Composites

DOI

2009

Fabrication of super-hydrophobic surface on copper surface by polymer plating

DOI

2009

Effect of the depth of the submerged entry nozzle in the mold on heat, flow and solution transport in double-stream-pouring continuous casting

DOI

2009

Synthesis of TiC Powder by Carbothermal Reduction and Phase Evolution

2009

Warm Flow Compaction Forming of Complex Part by Using Binder-Treated Powder

DOI

2009

High temperature annealing of 2024/3003 aluminum alloy

2009

Microstructure and Mechanical Properties of SPSed ( Spark Plasma Sintered ) Ti

2009

Effect of deformation temperature on microstructures and properties of 7075/6009 alloy

DOI

2009

Physical model and simulation system of powder packing

DOI

2009

WC toughened and strengthened Ni3Al hard alloy and preparation method thereof

2009

Research Progress in W-Ni-Fe High Density Alloys

2009

Wear of Friction Material during Vehicle Braking

DOI

2009

Effects of ladle inside melt temperature on microsturctures and properties of 7075/6009 composite plates

2009

Vertical Indirect Squeeze Casting Process of an Al-Cu-Mn Alloy Frame Part

DOI

2009

A method of controlling mtc solidification process by cooling threshold

International Conference on Informatics and Analytics

DOI

2009

Overview on Densification Process of Spray-formed Porous Materials

2009

Effects of position of submerged entry nozzle in mould on composition and structures of 7075/6009 Al alloy ingots

2009

Effect of plastic deformation on microstructure and hardness of 2024/3003 gradient composite ingot prepared by continuous casting

DOI

2009

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SPRAY FORMED HIGH ALLOY TOOL STEEL

2009

Microstructures and mechanical properties of Al-Si-Cu-T4 solidified at different squeeze pressures

2009

Effects of Mechanical Activation Factors on Synthesis of Nano-TiC by TiO_2 Carbothermal Reduction Reaction

2009

Calibration of damping coefficient in discrete element method simulation

DOI

2009

Polymer plating on AZ31 magnesium alloy surface and film evaluation of corrosion property

DOI

2009

SUPERPLASTICITY AND MICROSTRUCTURE EVOLUTION IN Mg-1.5Mn-0.3Ce ALLOY DEFORMED BY T-SHAPE CHANNEL PRESSING

2009

Microstructure and Property of High-strength Heat-resistant Cu-Ni-based Alloy Prepared by Centrifugal Casting

2009

Synthesis of Ti_3SiC_2-SiC Composites Bulk by Pressureless Sintering

2009

Experimental and numerical analysis of gas entrapment defects in plate ADC12 die castings

DOI

2009

Preparation of polymeric function film with different wettability

2009

SiC–Ti layered material prepared by binder-treated powder sintering

DOI

2009

Microstructure and mechanical properties of ZE10 magnesium alloy prepared by equal channel angular pressing

DOI

2009

On the Microstructure and Impact Properties of Slow Injection A356 Die Castings with Local Pressurization

DOI

2009

Die wall lubricated warm compacting and sintering behaviors of pre-mixed Fe–Ni–Cu–Mo–C powders

DOI

2009

Microstructure and Mechanical Properties of SPSed (Spark Plasma Sintered) Ti66Nb13Cu8Ni6:8Al6:2 Bulk Alloys with and without WC Addition

DOI

2009

Effect of Melt Temperature in Outside Ladle on Microstructure and Hardness Distribution of 7075/6009 Aluminum Alloy

2009

Ni对耐热铸造Cu-Ni-Al合金组织和性能的影响

《特种铸造及有色合金》

2008

大块金属玻璃及其复合材料的粉末冶金成形研究进展

《材料导报》

2008

MODELING OF MICROPOROSITY FORMATION IN UPWARD VERTICALLY SOLIDIFIED Al-Cu CASTING

2008

Fabrication of W-4Ni-2Co-1Fe alloy by electric current sintering

2008

Tungsten carbide material with Ni3Al as cementing phase and preparation thereof

2008

INFLUENCES OF EXTRUSION TEMPERATURE ON MICROSTRUCTURE AND PROPERTIES OF SPRAY FORMED 60Si40Al ALLOY PARTS

2008

Improving mechanical properties of Mg-Al-Zn alloy sheets through accumulative roll-bonding

DOI

2008

Microstructure and property of porous SiC ceramics prepared by vacuum sintering

2008

一种以Ni 3 Al为粘结相的碳化钨材料及其制备方法

2008

Coupled Numerical Simulation on Heat, Flow and Solution Transport in Double-Stream-Pouring Continuous Casting

DOI

2008

Corrosion resistance of Mg-Mn-Ce magnesium alloy modified by polymer plating

DOI

2008

Microstructure evolution of semi-solid 2024 alloy during two-step reheating process

DOI

2008

Polymer plating on copper surface and study of thin film performance

2008

Research Progress in Formation of Bulk Metallic Glass and Its Composites by Powder Metallurgy

2008

High-ductility titanium based ultra-fine crystal composite material and method for producing the same

2008

Microstructural evolution and mechanical property of ME20M magnesium alloy processed by multidirectional forging

2008

Effect of Melt Temperature in the Ladle on Microstructure and Property of 7075/6009 Gradient Alloy

2007

网络陶瓷/金属复合材料的研究进展

《材料导报》

2007

Si及变质处理对Mg2Si/Mg复合材料的影响

《特种铸造及有色合金》

2007

粉末冶金制备铝及其复合材料的组织与性能

《轻合金加工技术》

2007

Study on the Mechanical Properties and Microstructure of Partially-diffuse Alloyed Fe-Cu-Ni-Mo-C Materials

2007

Research Development of Reticulated Ceramic-metal Composites

2007

Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by accumulative roll-bonding

DOI

2007

Effect of plastic deformation on microstructure and hardness of AlSi/A1 gradient composites

DOI

2007

Numerical simulation of mold-temperature-control solidification

DOI

2007

Stamping Formability of ZE10 Magnesium Alloy Sheets

DOI

2007

Studies on Preparation of Ti3SiC2 Particulate Reinforced Cu Matrix Composite by Warm Compaction and Its Tribological Behavior

DOI

2007

Effect of hot plastic deformation on microstructure and mechanical property of Mg-Mn-Ce magnesium alloy

DOI

2007

Effect of Pressure on Squeeze Cast Al-Cu-Mg Alloy

2007

Research Development of Preparing Metal Nanopowders by Electrolysis

2007

High specific gravity tungsten alloy material and preparation method for nano crystal block thereof

2007

STUDY ON THE SINTER-HARDENING PROPERTIES OF Fe-Cu-Ni-Mo-C MATERIALS BY WARM COMPACTION WITH WALL LUBRICATED DIE

2007

Effect of heat treatment on microstructure and properties of hot-extruded nickel-aluminum bronze

DOI

2007

Warm Compaction Forming of a Binder-Treated Fe-Base Material

DOI

2007

Analysis on the Development Strategy of Casting Industry in China

2007

Joining Property of EPDM Rubber/Cast Iron Adherend by Functional Polymeric Nanofilm

DOI

2007

A Study on Diffusion Wear of Machining Tool and Simulation by Diffusion Couple

DOI

2007

Study on High Performance Warm Compacted Fe-2Ni-2Cu-1Mo-1C Powder Metallurgy Materials

DOI

2007

Thoughts on Sustainable Development of Foundry Industry in China

2007

Numerical Simulation of Metal Powder Compaction Considering Material & Geometrical Nonlinearity

IEEE International Conference on Control and Automation

DOI

2007

Fabrication of NbCp-Reinforced Iron Matrix Composites by PM Techniques and Its Warm Compaction

DOI

2007

Debinding and sintering of warm compacted and binder-treated complex iron-base part

Transactions of Nonferrous Metals Society of China

2007

Electrochemical performance of organic film on copper surface by polymer plating of 6-mercapto-1,3,5-triazine-2,4-dithiol monosodium

Transactions of Nonferrous Metals Society of China

2007

Hard thick-film and wear resistance of Al–50Si–10M ternary alloys on A6063 aluminum alloy coated by low pressure plasma spraying

DOI

2007

Effect of pressure on microstructures and mechanical properties of A1-Cu-based alloy prepared by squeeze casting

2007

Effect of pressure on microstructures and mechanical properties of Al-Cu-based alloy prepared by squeeze casting

DOI

2006

放电等离子烧结(SPS)技术与新材料研究

《材料导报》

2006

Spark Plasma Sintering Technology and Its Application in Preparation of Advanced Materials

2006

Application of modified grey modeling method to forecasting the temperature during electric field assisted sintering

DOI

2006

Numerical simulation in powder compaction of metallurgy component

DOI

2006

Numerical modeling and simulation of metal powder compaction of balancer

DOI

2006

Study on high performance driving P/M gear for engine

DOI

2006

Manufacturing a TiAl alloy by high-energy ball milling and subsequent reactive sintering

DOI

2006

Mechanical Models and Numerical Simulation of Rolling Compaction for Metal Powders

DOI

2006

Numerical simulation of warm compacted synchronous pulley

DOI

2006

Mold design and temperature field analysis on electric current sintering of electrically conductive powders

DOI

2006

Coupled mechanical and thermal simulation of warm compaction

DOI

2006

Influence of sintering parameters on tensile strength of warm compacted Fe-2Ni-2Cu-1Mo-1C material

2006

PRINCIPLE,CHARACTERISTICS AND STATUS OF HIGH VELOCITY COMPACTION TECHNOLOGY IN POWDER METALLUGY

2006

The effect of Cu addition and milling contaminations on the microstructure evolution of ball milled Al-Pb alloy during sintering

DOI

2006

Net Shaping Technology of Warm Flow Compaction with Short Procedure and Low Costs

2005

镁合金疲劳的研究进展

《材料导报》

2005

Application of RBF Neural Network on Burnishing Process of Composites

2005

Directly extrusion cast high strength aluminium alloy

2005

STUDY ON POROSITY OF SINTERED METALLIC POROUS MATERIAL

2005

Microstructure and Properties of Squeeze Cast Al-Cu Alloy with Different Applied Pressure

2005

Evolvement of Study on Advanced WC Alloy

2005

STUDY ON PREPARATION OF WC-6Co-1.5Al CERMETS BY HIGH ENERGY BALL MILLING AND FIELD ACTIVATED SINTERING

2005

Heat treatment of 2024/3003 gradient composite and diffusion behavior of the alloying elements

DOI

2005

Application of Magnetic Field to Metal Material Preparation and Formation

2005

The Research on MPC-WS, a Web Service for the Simulation of Metal Powder Compaction Process

International Conference on Grid and Cooperative Computing

DOI

2005

Finite element simulation of chip formation in peripheral milling mild carbon steel

Journal of Harbin Institute of Technology(New series)

2005

Preparation of warm pressed diffusing particle reinforced iron-based powder metallized composite materials

2004

电磁场作用下的粉末成形固结技术研究进展

《材料导报》

2004

Warm compacting behavior of stainless steel powders

Transactions of Nonferrous Metals Society of China

2004

Preparation and tensile property of a high-strength, anticorrosion functionally graded 2024/3003 composite

DOI

2004

Three-dimensional combined finite-discrete element approach for simulation of single layer powder compaction process

Transactions of Nonferrous Metals Society of China

2004

Progress of Study on Formation and Consolidation of Powders Activated by Electrical and Magnetic Field

2004

Effects of RE on Microstructures and Mechanical Properties of Hot-Extruded AZ31 Magnesium Alloy

Journal of Rare Earths

2004

Microstructure and mechanical property of 2024/3003 gradient aluminum alloy

DOI

2003

Warm compaction behaviors of iron-based powder lubricated by different kinds of graphite

Transactions of Nonferrous Metals Society of China

2003

A study of aluminum bronze adhesion on tools during turning

DOI

2002

Study on the extruded structure of rapidly solidified hypereutectic Al-Si alloys

DOI

2002

Preparation of 2024/3003 gradient materials by semi-continuous casting using double-stream-pouring technique

DOI

2002

Effect of die wall lubrication on warm compaction powder metallurgy

DOI

2002

Warm compacted NdC particulate reinforced iron—base composite（II）——Microstructure and properties

2002

Rapidly solidified hypereutectic Al-Si alloys prepared by powder hot extrusion

2001

颗粒强化钢铁基复合材料的研究现状与展望

《粉末冶金工业》

2000

铝基复合材料研究进展

《轻合金加工技术》

1999

SiC颗粒增强铁基粉末冶金复合材料的研究

《华南理工大学学报(自然科学版)》

1998

SiC/钢基复合材料摩擦磨损特性研究

《机械工程材料》

1998

Al2O3p/ZQSn6-6-3复合材料及其摩擦磨损特性

《中国有色金属学报》

1998

SiC颗粒增强的钢基复合材料的快速磨损试验研究

《润滑与密封》

2011

Synthesis of Nanocrystalline (W, Ti)C from Respective Elemental Powders by Mechanical Alloying and Spark Plasma Sintering

DOI