贾涛｜东北大学｜学者主页

2026

热锻加热温度与时间对20CrMnTi渗碳晶粒度的影响

李博鹏，刘林凤，柳萍，贾涛，王震

《特殊钢》

2026

28SiMnB弹簧扁钢氧化与脱碳行为耦合机理研究

李帆，许磊，陈金童，贾涛，刘小江

《轧钢》

DOI

2026

热处理工艺对含B20CrMnTiH齿轮钢淬透性的影响

李海洋，郭子强，秦萱，杨天乐，贾涛

《特殊钢》

DOI

2026

Orbital-Level-Directed Selective CO2-to-C2H4 Photoreduction via Se Vacancies and Plasmonic Pt.

Yi-Xuan Shen, Tao Jia, Jiang Wu, Hao Zhou, Ming-Ze Ou, Ping He, Zaiguo Fu, Fang-He Zhou, Jia Lin, Zhongwei Chen

ACS Nano

DOI

2025

Al、N微合金化22CrMoH齿轮钢渗碳前的预备热处理

刘林凤，申长阳，吴奇，贾涛

《金属热处理》

DOI

2025

冷轧及退火工艺对Ni36因瓦合金热膨胀性能的影响

贺仰强，贾涛，窦晓尧，王闯

《特殊钢》

DOI

2024

Utilizing Er-doped ZnIn2S4 for efficient photocatalytic CO2 conversion

Fang-He Zhou, Yonglin Zhang, Jiang Wu, Wu Yang, Xu Fang, Tao Jia, Yang Ling, Ping He, Qizhen Liu, Jia Lin

Applied Catalysis B: Environmental

DOI

2023

Amorphous TiO2 doped with carbon for visible light photocatalytic oxidation of elemental mercury

Zheng-Xin Chen, Tianhang Tang, Bu-Qing Ni, Mengjie Bai, Yong-Feng Qi, Xin Yang, Tao Jia, Dao-Lei Wang, Jiang Wu, Jia Lin

Chemical Physics Letters

DOI

2023

Copper selenide sensitized low-cost porous coordination polymers towards efficient capture trace gaseous elemental mercury

Tao Jia, Yi-Fan Gu, Jiang Wu, Feng-Ting Li

Chemical Engineering Journal

DOI

2022

Impacts of expiration date on optimal ordering policy for deteriorating items under two-level trade credit: Quantity loss and quality loss

Feng Lin, Peng Wu, Jinzhao Shi, Jia Tao, Xingxuan Zhuo

Journal Of The Operational Research Society，Vol. 730, No. 60

DOI

2022

合金设计对贝氏体相变动力学影响的建模研究

李美莹，肖乃友，周剑华，贾涛

《东北大学学报(自然科学版)》

2022

LaFeO3 perovskite nanoparticles for efficient capture of elemental mercury from coal-fired flue gas

Hao-Nan Pei, Xiaokun Li, Yu-bao Song, Meilin Zhang, Dao-Lei Wang, Jiang Wu, Fangjun Wang, Y. Zhang, Xin-Yi Zhao, Tao Jia

Fuel

DOI

2022

Insights into the Mechanism of Elemental Mercury Removal via Ferric Chloride Modified Carbon Aerogel: An Experimental and Theoretical Research

Jia-Chen Li, Tong Li, Feng-Ting Li, Tao Jia, Jiang Wu, Si-Kai Wu, Yang Ling, Ping He, Xu Mao, Jie Dong

Chemical Engineering Journal

DOI

2022

Salt-Assisted Synthesis of Rod-Like Bi2S3 Single Crystals for Gas-Phase Elemental Mercury Removal

Jiang Wu, Lingtao Yang, Tao Jia, Dong-Jing Liu

Energy & Fuels

DOI

2022

Coordinative sulfur site over flower-structured MoS2 for efficient elemental mercury uptake from coal-fired flue gas

Yi-Xuan Xiao, Qian-Yan Liu, Yaji Huang, F. Tian, Tao Jia, Meilin Zhang, Qizhen Liu, Jiang Wu, Yao Peng, Xuzhuo Wang

Chemical Engineering Journal

DOI

2021

航空轴承钢渗碳热处理组织演变行为研究

姜霞霞，贾涛，王会，王昭东

《东北大学学报(自然科学版)》

2021

Selenium ligands doped ZnS for highly efficient immobilization of elemental mercury from coal combustion flue gas

Zi-Feng Luo, L. You, Jiang Wu, Yu-bao Song, Siyuan Ren, Tao Jia, Xiaokun Li, Li-Ping Chen, Yong-Feng Qi, P. He

DOI

2021

Nanosized ZnIn2S4 supported on facet-engineered CeO2 nanorods for efficient gaseous elemental mercury immobilization.

Tao Jia, Zheng Ji, Jiang Wu, Xin-Yi Zhao, Fangjun Wang, Yi-Xuan Xiao, Xuemei Qi, P. He, Feng-Ting Li

Journal of Hazardous Materials

DOI

2021

Tuning dimensionality TiO2/g-C3N4 heterostructure for enhanced elemental mercury removal performance under visible-light

Tian-Wei Tang, L. You, Pankun Liang, Tao Jia, W. Feng, Qizhen Liu, Fang Li, Wu Zhu, Dao-Lei Wang, Jiang Wu

Chemical Physics Letters

DOI

2021

Surface defect engineering of Fe-doped Bi7O9I3 microflowers for ameliorating charge-carrier separation and molecular oxygen activation

Tao Jia, Jiang Wu, Zhonghao Ji, C. Peng, Qizhen Liu, Min-Hui Shi, Jun-Yong Zhu, Huaning Wang, Dong-Jing Liu, Min Zhou

DOI

2021

Rational fabrication flowerlike BiOBr with oxygen vacancy for enhancing photocatalytic performance to remove gaseous mercury

Zhao-Peng Zhang, Shuai Li, Yu Guan, Tao Jia, Meilin Zhang, Qizhen Liu, Yong-Feng Qi, Jiang Wu, Guo-Long Liu, Xia-Lin Xie

Chemical Physics Letters

DOI

2021

Development of CuInS2/g-C3N4 nanolayer for efficient adsorption of elemental mercury from coal combustion flue gas

Zi-Feng Luo, Tao Jia, Qian-Yan Liu, Yu-bao Song, Min Zhou, Xinxia Ma, Jiang Wu, Zhiwei Qin, Xue-Fei Wu

DOI

2021

Eﬀect of (La, Ce, Eu) doping on structural, and optical properties of BiOI nanosheets: As a model of photocatalytic activity in heavy metal removal under visible light

Yi-Xuan Xiao, Y. Zhang, Li-Jun Ji, Jian-Bo Yang, Jiang Wu, Tao Jia, Zhiqiang Liu, Qizhen Liu, Yong-Feng Qi, J. Han

Materials Chemistry and Physics

DOI

2021

Spherical-shaped CuS modified carbon nitride nanosheet for efficient capture of elemental mercury from flue gas at low temperature.

Fangjun Wang, Run Wang, Tao Jia, Jiang Wu, Cheng Xu, Yu Sun, Xin Wang, Wen-Yu Wu, Yong-Feng Qi

Journal of Hazardous Materials

DOI

2021

Influence of different solvents on the performance of bismuth-based photocatalyst for mercury removal

Jian-Bo Yang, Tao Jia, Y. Zhang, Li-Jun Ji, Jiang Wu

DOI

2021

Construction of CeO2/BiOI S-scheme heterojunction for photocatalytic removal of elemental mercury

Yi-Xuan Xiao, Zheng Ji, Chan Zou, Yi-Qing Xu, Run Wang, Jiang Wu, Guo-Long Liu, P. He, Qiang Wang, Tao Jia

DOI

2021

In-situ growth of TiO2 phase junction nanorods with Ti3+ and oxygen vacancies to enhance photocatalytic activity

Zhonghao Ji, Jiang Wu, Tao Jia, C. Peng, Yi-Xuan Xiao, Zhiqiang Liu, Qizhen Liu, Yuhang Fan, J. Han, Liang-Sheng Hao

DOI

2021

Fabrication of BiOI nanosheets with exposed (001) and (110) facets with different methods for photocatalytic oxidation elemental mercury

Yi-Xuan Xiao, Jiang Wu, Tao Jia, Tong Li, ZiYun Wang, Yong-Feng Qi, Qizhen Liu, Xuemei Qi, P. He

DOI

2021

Nanosized Zn-In spinel-type sulfides loaded on facet-oriented CeO2 nanorods heterostructures as Z-scheme photocatalysts for efficient elemental mercury removal.

Tao Jia, Fei Luo, Jiang Wu, Feng-Hong Chu, Yi-Xuan Xiao, Qizhen Liu, W. Pan, Feng-Ting Li

Science of the Total Environment

DOI

2020

航空齿轮钢16Cr3NiWMoVNbE的真空低压渗碳

王斌，何燕萍，王昊杰，田勇，贾涛，王丙兴，王昭东

《材料研究学报》

2020

Fabrication of Z-Scheme Heterojunction g-C3N4/Yb3+-Bi5O7I Photocatalysts with Enhanced Photocatalytic Performance under Visible Irradiation for Hg0 Removal

Min Zhou, Jiang Wu, Huaning Wang, Da-Yong Guan, Xinfeng Dong, Jianmin Wang, Tao Jia, Qizhen Liu

DOI

2020

BiOIO3/graphene interfacial heterojunction for enhancing gaseous heavy metal removal

Yang Ling, Jiang Wu, Xiaokun Man, Yi-Qing Xu, Qizhen Liu, Yong-Feng Qi, Qiang Wu, Xuemei Qi, Tao Jia, Zi-Han Guo

DOI

2020

Molybdenum trioxide impregnated carbon aerogel for gaseous elemental mercury removal

Yang Ling, Xiaokun Man, Wen-Bo Zhang, Dao-Lei Wang, Jiang Wu, Qizhen Liu, Mingyan Gu, Yu-Yu Lin, P. He, Tao Jia

Korean Journal of Chemical Engineering

DOI

2020

Self-grown oxygen vacancies-rich CeO2/BiOBr Z-scheme heterojunction decorated with rGO as charge transfer channel for enhanced photocatalytic oxidation of elemental mercury.

Tao Jia, Jiang Wu, Yi-Xuan Xiao, Qizhen Liu, Qiang Wu, Yong-Feng Qi, Xuemei Qi

Journal of Colloid and Interface Science

DOI

2020

CeO2/BiOIO3 heterojunction with oxygen vacancies and Ce4+/Ce3+ redox centers synergistically enhanced photocatalytic removal heavy metal

Yi-Xuan Xiao, Shaoqing Tan, Dao-Lei Wang, Jiang Wu, Tao Jia, Qizhen Liu, Yong-Feng Qi, Xuemei Qi, P. He, Min Zhou

DOI

2020

Facet-dependent flower-like BiOBr with exposed the (0 0 1) and (0 1 0) facets for enhanced charge carrier transfer and photocatalytic oxidation activity

Tao Jia, Jian-Bo Yang, Y. Zhang, Li-Jun Ji, Yi-Yu Chen, Dao-Lei Wang, Jiang Wu, Yong-Feng Qi, Jinming Zhai

DOI

2020

In situ self-growing 3D hierarchical BiOBr/BiOIO3 Z-scheme heterojunction with rich oxygen vacancies and iodine ions as carriers transfer dual-channels for enhanced photocatalytic activity

Tao Jia, Jiang Wu, Jie Song, Qizhen Liu, Jianmin Wang, Yong-Feng Qi, P. He, Xuemei Qi, Lingtao Yang, P. Zhao

DOI

2020

Synthesis amorphous TiO2 with oxygen vacancy as carriers transport channels for enhancing photocatalytic activity

Tao Jia, Jing Zhang, Jiang Wu, Dao-Lei Wang, Qizhen Liu, Yong-Feng Qi, Bin Hu, P. He, W. Pan, Xuemei Qi

DOI

2019

考虑保质期的非即时易腐品最优订购与定价决策

张锐，林峰，贾涛

《运筹与管理》，Vol. 28, No. 5

下载原文

2019

Recent advances in BiOIO3 based photocatalytic nanomaterials

Tao Jia, Yi-Xuan Xiao, Zhonghao Ji, Run Wang, Jiang Wu

E3S Web of Conferences

DOI

2019

Fabrication of BiOI/MoS2 heterojunction photocatalyst with different treatment methods for enhancing photocatalytic performance under visible-light

Yu Guan, Jiang Wu, Qizhen Liu, Mingyan Gu, Yu-Yu Lin, Yong-Feng Qi, Tao Jia, W. Pan, P. He, Qing-Wei Li

DOI

2019

Constructing 2D BiOIO3/MoS2 Z-scheme heterojunction wrapped by C500 as charge carriers transfer channel: Enhanced photocatalytic activity on gas-phase heavy metal oxidation.

Tao Jia, Kai Xu, Jiang Wu, Qizhen Liu, Yu-Yu Lin, Mingyan Gu, Fengguo Tian, W. Pan, Jia-Xi Wu, Yi-Xuan Xiao

Journal of Colloid and Interface Science

DOI

2017

普适的碳氮化物析出热力学模型的建立

杨永，王昭东，贾涛，李艳梅

《东北大学学报(自然科学版)》

2017

一种第二相析出-温度-时间曲线计算模型的建立

杨永，王昭东，李天瑞，贾涛，李小琳，王国栋

《金属学报》

2016

Nb对奥氏体→铁素体相变动力学影响的模型

刘雪峰，贾涛，朱本强

《东北大学学报(自然科学版)》

2016

低碳、Ti-V复合微合金化钢的流变应力模型

沈继程，贾涛，刘振宇

《东北大学学报(自然科学版)》

2013

氧化铁皮在冷轧过程中的断裂行为

何永全，贾涛，刘振宇，李俊

《东北大学学报(自然科学版)》

2011

允许订单延后的易腐品库存——路径问题研究

刘静，贾涛，吉哲

《统计与决策》，No. 20

下载原文

2011

条件延期付款下一体化可控提前期模型研究

贾涛，赵晓宇贾涛徐渝

《运筹与管理》，No. 5

下载原文

2010

基于可变建设成本的风险共担选址—库存模型研究

贾涛，王非贾涛胡信步

《运筹与管理》，No. 4

下载原文

2010

物流金融创新下的订单融资业务风险管理

李娟，徐渝，贾涛

《统计与决策》，No. 19

下载原文

2009

需求依赖于库存量的供应链商业信用期问题研究

贾涛，贾涛徐渝

《运筹与管理》，No. 3

下载原文

2009

商业信用下两阶段可变腐败率商品库存决策问题研究

贾涛，耿凯平徐渝贾涛

《运筹与管理》，No. 4

下载原文

2008

基于贝叶斯神经网络的SPA-H热轧板力学性能预测

贾涛，刘振宇，胡恒法，王国栋

《东北大学学报(自然科学版)》

2007

基于可控提前期和可变押后订单比例的库存问题研究

贾涛，陈志刚徐渝贾涛

《运筹与管理》，Vol. 16, No. 1

下载原文

Novel metal sulfide sorbents for elemental mercury capture in flue gas: A review

Dong-Jing Liu, Chao-En Li, Tao Jia, Jiang Wu, Bin Li

Fuel

DOI

精选作品

期刊论文

热锻加热温度与时间对20CrMnTi渗碳晶粒度的影响

28SiMnB弹簧扁钢氧化与脱碳行为耦合机理研究

热处理工艺对含B20CrMnTiH齿轮钢淬透性的影响

Orbital-Level-Directed Selective CO2-to-C2H4 Photoreduction via Se Vacancies and Plasmonic Pt.

Al、N微合金化22CrMoH齿轮钢渗碳前的预备热处理

冷轧及退火工艺对Ni36因瓦合金热膨胀性能的影响

Utilizing Er-doped ZnIn2S4 for efficient photocatalytic CO2 conversion

Amorphous TiO2 doped with carbon for visible light photocatalytic oxidation of elemental mercury

Copper selenide sensitized low-cost porous coordination polymers towards efficient capture trace gaseous elemental mercury

Impacts of expiration date on optimal ordering policy for deteriorating items under two-level trade credit: Quantity loss and quality loss

合金设计对贝氏体相变动力学影响的建模研究

LaFeO3 perovskite nanoparticles for efficient capture of elemental mercury from coal-fired flue gas

Insights into the Mechanism of Elemental Mercury Removal via Ferric Chloride Modified Carbon Aerogel: An Experimental and Theoretical Research

Salt-Assisted Synthesis of Rod-Like Bi2S3 Single Crystals for Gas-Phase Elemental Mercury Removal

Coordinative sulfur site over flower-structured MoS2 for efficient elemental mercury uptake from coal-fired flue gas

航空轴承钢渗碳热处理组织演变行为研究

Selenium ligands doped ZnS for highly efficient immobilization of elemental mercury from coal combustion flue gas

Nanosized ZnIn2S4 supported on facet-engineered CeO2 nanorods for efficient gaseous elemental mercury immobilization.

Tuning dimensionality TiO2/g-C3N4 heterostructure for enhanced elemental mercury removal performance under visible-light

Surface defect engineering of Fe-doped Bi7O9I3 microflowers for ameliorating charge-carrier separation and molecular oxygen activation

Rational fabrication flowerlike BiOBr with oxygen vacancy for enhancing photocatalytic performance to remove gaseous mercury

Development of CuInS2/g-C3N4 nanolayer for efficient adsorption of elemental mercury from coal combustion flue gas

Eﬀect of (La, Ce, Eu) doping on structural, and optical properties of BiOI nanosheets: As a model of photocatalytic activity in heavy metal removal under visible light

Spherical-shaped CuS modified carbon nitride nanosheet for efficient capture of elemental mercury from flue gas at low temperature.

Influence of different solvents on the performance of bismuth-based photocatalyst for mercury removal

Construction of CeO2/BiOI S-scheme heterojunction for photocatalytic removal of elemental mercury

In-situ growth of TiO2 phase junction nanorods with Ti3+ and oxygen vacancies to enhance photocatalytic activity

Fabrication of BiOI nanosheets with exposed (001) and (110) facets with different methods for photocatalytic oxidation elemental mercury

Nanosized Zn-In spinel-type sulfides loaded on facet-oriented CeO2 nanorods heterostructures as Z-scheme photocatalysts for efficient elemental mercury removal.

航空齿轮钢16Cr3NiWMoVNbE的真空低压渗碳

Fabrication of Z-Scheme Heterojunction g-C3N4/Yb3+-Bi5O7I Photocatalysts with Enhanced Photocatalytic Performance under Visible Irradiation for Hg0 Removal

BiOIO3/graphene interfacial heterojunction for enhancing gaseous heavy metal removal

Molybdenum trioxide impregnated carbon aerogel for gaseous elemental mercury removal

Self-grown oxygen vacancies-rich CeO2/BiOBr Z-scheme heterojunction decorated with rGO as charge transfer channel for enhanced photocatalytic oxidation of elemental mercury.

CeO2/BiOIO3 heterojunction with oxygen vacancies and Ce4+/Ce3+ redox centers synergistically enhanced photocatalytic removal heavy metal

Facet-dependent flower-like BiOBr with exposed the (0 0 1) and (0 1 0) facets for enhanced charge carrier transfer and photocatalytic oxidation activity

In situ self-growing 3D hierarchical BiOBr/BiOIO3 Z-scheme heterojunction with rich oxygen vacancies and iodine ions as carriers transfer dual-channels for enhanced photocatalytic activity

Synthesis amorphous TiO2 with oxygen vacancy as carriers transport channels for enhancing photocatalytic activity

考虑保质期的非即时易腐品最优订购与定价决策

Recent advances in BiOIO3 based photocatalytic nanomaterials

Fabrication of BiOI/MoS2 heterojunction photocatalyst with different treatment methods for enhancing photocatalytic performance under visible-light

Constructing 2D BiOIO3/MoS2 Z-scheme heterojunction wrapped by C500 as charge carriers transfer channel: Enhanced photocatalytic activity on gas-phase heavy metal oxidation.

普适的碳氮化物析出热力学模型的建立

一种第二相析出-温度-时间曲线计算模型的建立

Nb对奥氏体→铁素体相变动力学影响的模型

低碳、Ti-V复合微合金化钢的流变应力模型

氧化铁皮在冷轧过程中的断裂行为

允许订单延后的易腐品库存——路径问题研究

条件延期付款下一体化可控提前期模型研究

基于可变建设成本的风险共担选址—库存模型研究

物流金融创新下的订单融资业务风险管理

需求依赖于库存量的供应链商业信用期问题研究

商业信用下两阶段可变腐败率商品库存决策问题研究

基于贝叶斯神经网络的SPA-H热轧板力学性能预测

基于可控提前期和可变押后订单比例的库存问题研究

Novel metal sulfide sorbents for elemental mercury capture in flue gas: A review