姜启川

2026

Solidification-induced anomalous stacking fault-related defects in laser-melted aluminum alloys

Journal of Materials Science & Technology

DOI

2026

Achieving macrozone elimination and strength-ductility synergy in α-Ti alloy via intragranular TiB particles using ZrB2 as boron source

Materials Characterization

DOI

2026

Research progress on the formation, regulation, and failure mechanisms of the γ′ phase in nickel-based superalloy

Journal of Materials Research and Technology

DOI

2026

Trace nanoparticle-mediated modification of the Fe-rich phases and enhancement of mechanical properties in Al-Mg-Si-0.6Fe alloy

Materials Science and Engineering A

DOI

2026

Laser additive manufacturing of particle reinforced aluminum alloys

Journal of Materials Processing Technology

DOI

2026

Enhanced short-term creep resistance of hot-work die steel via nanoparticle-assisted through-process microstructural regulation

Materials Science and Engineering A

DOI

2026

Development of nanoparticle-reinforced highly alloyed Al–Zn–Mg–Cu alloy with ultrahigh strength

Materials Science and Engineering A

DOI

2026

Advances in particle-reinforced high-entropy alloys: Preparation, particle characterization, properties, and prospects

Journal of Materials Research and Technology

DOI

2026

Research Progress on Microstructure Control and Strengthening Mechanisms of Aluminum Alloys for New Energy Vehicles

Materials

DOI

2026

Nanoparticle-enabled superplasticity in extruded AZ91 magnesium alloy with elongation exceeding 600%

International Journal of Extreme Manufacturing

DOI

2026

Research progress on rare earth-containing heat-resistant magnesium alloys

Journal of Materials Research and Technology

DOI

2026

Sustaining excellent strength and toughness in high-Cr die steel via trace nano-ceramic particle modification under cyclic thermal exposure

Materials Science and Engineering A

DOI

2026

Superplastic magnesium alloys: A critical review of processing, deformation mechanisms, and particulate reinforcement strategies

Journal of Materials Research and Technology

DOI

2026

Microstructure tailoring with minor nanoparticle addition for superior fatigue resistance in aluminum alloys

Materials Science and Engineering A

DOI

2026

Enhanced thermal cycle stability by nanoparticles to overcome thermally induced cracking in die steel

Materials Science and Engineering A

DOI

2025

Evading strength-corrosion tradeoff in laser-melted Al alloys through twin-related grain boundary engineering

Materials Research Letters

DOI

2025

The development of high thermal conductivity die steel with excellent performance: Integrating alloy design, heat treatment, and ceramic particle reinforcement

Journal of Materials Research and Technology

DOI

2025

Enhanced high-temperature tensile performance and strengthening mechanism of Al-13Si alloys reinforced by trace micron/nano hybrid-sized TiB2

Ceramics International

DOI

2025

Opening the future of lightweight: Research progress in additive manufacturing of TiAl alloys

Journal of Materials Research and Technology

DOI

2025

Multiscale orchestration of microstructures in duplex stainless steel via introduction of trace nanoceramics

Materials Science and Engineering A

DOI

2025

Additive manufacturing of high-strength and crack-sensitive aluminum alloy using novel in-situ ceramics reinforced powder

Journal of Material Science and Technology

DOI

2025

Development and future of TiAl composites – microstructural characteristics and high-temperature service performance

Journal of Materials Research and Technology

DOI

2025

In depth analysis of microstructure and mechanical properties of joints in thick plate friction stir welding of high–strength Al–Zn–Mg–Cu alloy

Materials Characterization

DOI

2025

Enhancing high-temperature performance of Al Cu alloys via nanoceramic particle-induced grain boundary stabilization and precipitate manipulation

Materials Characterization

DOI

2025

Thermal fatigue failure mechanisms and enhancement strategies of die steel

Journal of Materials Research and Technology

DOI

2025

The role of in-situ dual-phase NbB2 and NbC particles on the microstructure and toughening mechanisms of NiAl composites

Ceramics International

DOI

2025

The Microstructure Regulation Mechanism and Future Application of Aluminum Alloys Manipulated by Nanocrystalline Structures Formed by In Situ Amorphous Crystallization

Materials

DOI

2025

Rare Earth Elements in Heat-Resistant Magnesium Alloys: Mechanisms, Performance, and Design Strategies

Materials

DOI

2025

Recent advances on magnesium alloys for automotive cabin components: Materials, applications, and challenges

Journal of Materials Research and Technology

DOI

2025

The development of high-strength flame-retardant magnesium alloys

Journal of Materials Research and Technology

DOI

2025

Excellent high-temperature friction and wear resistance of high–Cr die steels by trace in–situ nano-ceramics

Ceramics International

DOI

2025

Competitive and collaborative relationship between Al–3P and TiB2 nanoparticles in the microstructure manipulation of eutectic Al–Si alloys

Journal of Materials Research and Technology

DOI

2024

Introducing high-density growth twins in aluminum alloys by laser surface remelting via templated nucleation of grains

Journal of Materials Science & Technology

DOI

2024

Improving the compressive properties of laser powder bed fusion Ti-6Al-4V containing oxygen and nitrogen by adding trace TiC+TiB nanoparticles

Materials Science & Engineering: A

DOI

2024

Enhanced strength-ductility in a cast basket-weave-structured α-Ti alloy by adding TiC nanoparticles

Materials Science & Engineering: A

DOI

2024

A new as-cast α+β Ti-8Al-4V-1Nb-xB alloy with excellent strength and elongation at 550 ℃

Journal of Alloys and Compounds

DOI

2024

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Materials

DOI

2024

Sub-rapid solidification microstructure characteristics and control mechanisms of twin-roll cast aluminum alloys: A review

Journal of Materials Research and Technology

DOI

2024

Nano-Enhanced Phase Reinforced Magnesium Matrix Composites: A Review of the Matrix, Reinforcement, Interface Design, Properties and Potential Applications

Materials

DOI

2024

Effects of various proportions TiB2p-TiCp reinforced Al–Cu–Mg composites in high-temperature mechanical properties and sliding wear behaviors

Journal of Materials Research and Technology

DOI

2024

Thermal fatigue performance enhancement of new high-Cr martensitic die steels based on overall microstructure manipulation by trace TiC–TiB2 nanoparticles

Materials Science and Engineering A

DOI

2024

Tailored porosity in additive manufacturing of 7075 aluminum alloy for crack suppression and high strength

Journal of Materials Processing Technology

DOI

2024

Research progress, application and development of high performance 6000 series aluminum alloys for new energy vehicles

Journal of Materials Research and Technology

DOI

2024

The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology

Materials

DOI

2024

Recent progress of Al–Mg alloys: Forming and preparation process, microstructure manipulation and application

Journal of Materials Research and Technology

DOI

2024

Advance on rock-breaking cutter steels: A review of characteristics, failure modes, molding processes and strengthening technology

Journal of Materials Research and Technology

DOI

2024

Effect of synergistic microalloying on the microstructural optimization of Mo/NiAl alloy with excellent mechanical properties under rapid non-equilibrium solidification

Materials Science and Engineering A

DOI

2024

Microstructure, solidification defects and mechanical properties of high-modulus and high-strength SiC/AlSi10Mg composites fabricated by selective laser melting

Ceramics International

DOI

2024

Research progress on nanoparticles reinforced magnesium alloys

Journal of Materials Research and Technology

DOI

2024

Review on manufacturability and strengthening mechanisms of particulate reinforced Mg composites

Journal of Materials Research and Technology

DOI

2024

Excellent strength-toughness combination of NiAl–30Cr composites with novel in situ composite microstructure containing NiAl matrix and Cr single-phase

Materials Science and Engineering A

DOI

2024

Preparation of iron-based composites reinforced with submicron/nano-sized TiC ceramic particles by in-situ reaction in melts and one-step integrated hot pressing densification

Ceramics International

DOI

2024

Effects and mechanisms of rare earth and calcium on the flame retardancy of magnesium alloys

Journal of Materials Research and Technology

DOI

2024

The role of Ti in the phase transformation and microstructure manipulation of ZrCu alloys with excellent mechanical properties

Journal of Materials Research and Technology

DOI

2023

The effect of the TiC-TiB2 nanoparticles on the microstructure and mechanical properties of Al-Mn-Si strips fabricated by twin-roll casting

Journal of Alloys and Compounds

DOI

2023

Effect of Mg and Si contents and TiC nanoparticles on the center segregation susceptibility of twin-roll cast Al–Mg–Si alloys

Journal of Materials Research and Technology

DOI

2023

The Role of Lithium in the Aging Precipitation Process of Al-Zn-Mg-Cu Alloys and Its Effect on the Properties

Materials

DOI

2023

Insights into the influences of nanoparticles on microstructure evolution mechanism and mechanical properties of friction-stir-welded Al 6061 alloys

Materials Science and Engineering A

DOI

2023

Novel method to achieve synergetic strength–ductility improvement of Al–Cu alloy by in situ TiC–TiB2 particles via direct reaction synthesis

Materials Science and Engineering A

DOI

2023

Application of ceramic nanoparticles in microstructure manipulation and simultaneously strengthening toughness and wear resistance of tool and die steels

Ceramics International

DOI

2023

Review on laser directed energy deposited aluminum alloys

International Journal of Extreme Manufacturing

DOI

2023

Significantly enhanced fatigue resistance and mechanisms of hypoeutectic Al-Si composite calibrated using trace in-situ nanocrystals

Composites Part B Engineering

DOI

2023

Development of ceramic nanoparticles reinforced high Cr tool and die steels with high comprehensive performance

Ceramics International

DOI

2023

Friction stir welding of high strength and toughness cast Al-Si7-Cu4-Mg0.3 alloys manipulated by in-situ nanocrystals

Journal of Materials Processing Technology

DOI

2023

Review on role of intermetallic and ceramic particles in recrystallization driving force and microstructure of wrought Al alloys

Journal of Materials Research and Technology

DOI

2023

Development and applications of aluminum alloys for aerospace industry

Journal of Materials Research and Technology

DOI

2023

Development Trend in Composition Optimization, Microstructure Manipulation, and Strengthening Methods of Die Steels under Lightweight and Integrated Die Casting

Materials

DOI

2023

Microstructure-based simulation on the mechanical behavior of particle reinforced metal matrix composites with varying particle characteristics

Journal of Materials Research and Technology

DOI

2023

Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: preparation, performance, and mechanisms

International Journal of Extreme Manufacturing

DOI

2023

Instantaneous efficient microstructure manipulation of eutectic Al Si alloy by trace in-situ nanoparticles and their mechanism in superior tensile properties

Materials Characterization

DOI

2023

Effect of Nano‐TiC Ceramic Particles on Microstructures and Properties of High‐Cr Steel under Different Heat‐Treatment Conditions

Advanced Engineering Materials

DOI

2023

Hot-work die steel with superior mechanical properties at room and high temperatures prepared via a combined approach of composition design and nanoparticle modification

Journal of Materials Research and Technology

DOI

2022

Nanoparticle Additions Improve the Corrosion Performance of Ni-Cr-Fe-Based Cast Superalloys

Journal of materials engineering and performance (Print)

DOI

2022

Exploring the potential of FSW-ed Al–Zn–Mg–Cu-based composite reinforced by trace in-situ nanoparticles in manufacturing workpiece with customizable size and high mechanical performances

Composites Part B Engineering

DOI

2022

Multilevel microstructure control of cast Al–7.0Si–4.0Cu alloy with high strength–toughness synergy via micro-alloying combined with manipulation by in-situ nano-ceramics

Journal of Materials Research and Technology

DOI

2022

Strengthening of dislocation and precipitation for high strength and toughness casting Al–Zn–Mg–Cu alloy via trace TiB2+TiC particles

Materials Science and Engineering A

DOI

2022

Investigation on the elevated-temperature tribological behaviors and mechanism of Al-Cu-Mg composites reinforced by in-situ size-tunable TiB2-TiC particles

Tribology International

DOI

2022

Versatility of trace nano-TiC–TiB2 in collaborative control of solidification-rolling-welding microstructural evolution in Al–Mg–Si alloy for enhanced properties

Materials Science and Engineering A

DOI

2022

The effect of carbon source and molar ratio in Fe–Ti–C system on the microstructure and mechanical properties of in situ TiC/Fe composites

Ceramics International

DOI

2022

Synergistic optimization in solidification microstructure and mechanical performance of novel (TiC N − TiB2)p/Al nanocomposites: Design, tuning and mechanism

Composites Part A Applied Science and Manufacturing

DOI

2022

Role of V in microstructure and strength enhancement of 4 vol% nano-TiB2/TiAl composites

Materials Science and Engineering A

DOI

2022

The effect of Mg/Si ratio on the microstructure and tensile properties of twin-roll casting Al-Mg-Si alloys

Materials Characterization

DOI

2022

Microstructure manipulation and strengthening mechanism of TiAl composites reinforced by Cr solid solution and in-situ nanometer-sized TiB2 particles

Materials Science and Engineering A

DOI

2022

Role and mechanism of innovative addition process of trace nano-TiCp in microstructure manipulation and significant mechanical properties enhancement of H13 steels

Journal of Materials Processing Technology

DOI

2022

Microstructure manipulation mechanism and mechanical properties improvement of H13 steel via trace nano-(TiC + TiB2) particles

Materials Characterization

DOI

2022

Role of In-Situ Nanocrystalline in Solidification Behaviors Manipulation, Microstructure Refinement, and Mechanical Properties Enhancement of Al-Cu4/Al-Mg1 Alloys

Materials Characterization

DOI

2021

Effect of TiC Nanoparticles on the Mechanical Properties of a K465 Superalloy

Journal of Physics Conference Series

DOI

2021

Insight into solidification microstructure control by trace TiCN–TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al–Si–Mg alloy

Materials Science and Engineering A

DOI

2021

Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation

Composites Part B Engineering

DOI

2021

Increased tensile strength and elongation of the Ni–Fe based polycrystalline cast superalloy via the trace addition of TiC nanoparticles

Materials Science and Engineering A

DOI

2021

Microstructural configuration and compressive deformation behavior of a TiAl composite reinforced by Mn and in situ Ti2AlC particles

Materials Science and Engineering A

DOI

2021

Microstructure manipulation and strengthening mechanisms of 40Cr steel via trace TiC nanoparticles

Materials Science and Engineering A

DOI

2021

Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al–Cu nanocomposites

Ceramics International

DOI

2021

Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles

Materials Science and Engineering A

DOI

2021

Effectively mitigated macro-segregation and improved tensile properties of twin-roll casting Al-Cu strips via the addition of TiC nanoparticles

Journal of Materials Processing Technology

DOI

2021

Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution

Composites Part B Engineering

DOI

2021

Role of trace nanoparticles in establishing fully optimized microstructure configuration of cold-rolled Al alloy

Materials & Design

DOI

2021

Synergistic effects of the TiC nanoparticles and cold rolling on the microstructure and mechanical properties of Al–Cu strips fabricated by twin-roll casting

Materials Science and Engineering A

DOI

2021

Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles

Journal of the American Ceramic Society

DOI

2021

Microstructure evolution and mechanical property enhancement of high-Cr hot work die steel manipulated by trace amounts of nano-sized TiC

Materials Science and Engineering A

DOI

2020

Retraction notice to “The effect and mechanism of alloying elements on Al/SiC interfacial reaction in Al melt” [Appl. Surf. Sci. 501 (2020) 144265]

Applied Surface Science

DOI

2020

Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites

Materials Science and Engineering A

DOI

2020

The lamella structure of Al-Mg-Si matrix nanocomposites with isotropically high strength

Materialia

DOI

2020

Effect mechanism of in situ nano-intermetallic inoculation on the multilevel microstructure and mechanical properties of Al-13Si alloys

Materialia

DOI

2020

3D highly oriented metal foam: a competitive self-supporting anode for high-performance lithium-ion batteries

Journal of Materials Science

DOI

2020

A novel approach to the rapid synthesis of high‐entropy carbide nanoparticles

Journal of the American Ceramic Society

DOI

2020

Simultaneously increased strength and ductility via the hierarchically heterogeneous structure of Al-Mg-Si alloys/nanocomposite

Materials Research Letters

DOI

2020

Application of nanoparticles in cast steel: An overview

China Foundry

DOI

2020

Preparation and characterization of high damage-tolerance nacre-inspired magnesium alloy matrix composites with high carbon nanotube contents

Carbon

DOI

2020

Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloy

Corrosion Science

DOI

2020

Multiscale design of α-Al, eutectic silicon and Mg2Si phases in Al-Si-Mg alloy manipulated by in situ nanosized crystals

Materials Science and Engineering A

DOI

2020

Improved Strength-Ductility of Ti-6Al-4V Casting Alloys with Trace Addition of TiC-TiB2 Nanoparticles

Nanomaterials

DOI

2020

Investigation of the influences of ternary Mg addition on the solidification microstructure and mechanical properties of as-cast Al–10Si alloys

Materials Science and Engineering A

DOI

2020

Effects of cooling rate and TiC nanoparticles on the microstructure and tensile properties of an Al–Cu cast alloy

Materials Science and Engineering A

DOI

2020

In situ nanocrystals manipulate solidification behavior and microstructures of hypereutectic Al-Si alloys by Zr-based amorphous alloys

Journal of Materials Research and Technology

DOI

2020

Microstructure refinement and strengthening of Al–Cu alloys manipulated by nanocrystalline phases formed by in situ crystallization of Ni–Nb–Ti metallic glasses in melt

Journal of Materials Research and Technology

DOI

2020

Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles

Materials Science and Engineering A

DOI

2019

综述:SiC/Al界面反应与界面结构演变规律及机制

《金属学报》

2019

Dry sliding friction and wear characterization of in situ TiC/Al-Cu3.7-Mg1.3 nanocomposites with nacre-like structures

Journal of Materials Research and Technology

DOI

2019

The influence of surface orientation on the wetting and reaction at the Al/MgAl2O4 interfaces

Ceramics International

DOI

2019

Nanoparticle additions promote outstanding fracture toughness and fatigue strength in a cast Al–Cu alloy

Materials & Design

DOI

2019

Enhancing Thermal Stability of Binary Al-Mg Alloys by Tailoring Grain Orientations Using a High Solute Mg Content

Metallurgical and Materials Transactions A

DOI

2019

A new approach for improving the elevated-temperature strength and ductility of Al–Cu–Mg–Si alloys with minor amounts of dual-phased submicron/nanosized TiB2–TiC particles

Materials Science and Engineering A

DOI

2019

Roles of direct current in ultrafast wetting of 3YSZ by Sn3.0Ag0.5Cu and joining to Ni

Materialia

DOI

2019

Nanoparticulate dispersion, microstructure refinement and strengthening mechanisms in Ni-coated SiCp/Al-Cu nanocomposites

Materials Science and Engineering A

DOI

2019

Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation

Materials & Design

DOI

2019

Electrically induced spreading of EGaIn on Cu substrate in an alkali solution under wetting and non-wetting conditions

Applied Surface Science

DOI

2019

A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration

Scripta Materialia

DOI

2019

A novel approach to the fabrication of lamellar Al2O3/6061Al composites with high-volume fractions of hard phases

Materials Science and Engineering A

DOI

2019

Microstructure refinement and strengthening mechanisms of bimodal-sized and dual-phased (TiCn-Al3Tim)/Al hybrid composites assisted ultrasonic vibration

Journal of Alloys and Compounds

DOI

2019

Efficient microstructure refinement of Al–Si–Mg alloy manipulated by nanocrystals formed by in-situ crystallization in melt

Materials Science and Engineering A

DOI

2019

Effect of Preheating Temperature on the Microstructure and Tensile Properties of 6061 Aluminum Alloy Processed by Hot Rolling-Quenching

Metals

DOI

2019

Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting

Materials Science and Engineering A

DOI

2019

DC-assisted rapid wetting of 3Y-PSZ by molten 72Ag–28Cu and its application in joining

Journal of the European Ceramic Society

DOI

2019

Roles of alloying elements in wetting of SiC by Al

Journal of Alloys and Compounds

DOI

2019

The Synthesis, Structure, Morphology Characterizations and Evolution Mechanisms of Nanosized Titanium Carbides and Their Further Applications

Nanomaterials

DOI

2019

Microstructures and mechanical characterizations of high-performance nacre-inspired Al/Al2O3 composites

Composites Part A Applied Science and Manufacturing

DOI

2019

Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms

Ceramics International

DOI

2019

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiCxNy–TiB2)/Ni cermets

Progress in Natural Science Materials International

DOI

2018

Effects of nanosized TiCp dispersion on the high-temperature tensile strength and ductility of in situ TiCp/Al-Cu-Mg-Si nanocomposites

Journal of Alloys and Compounds

DOI

2018

Microstructure and wear behaviour of Al-20Mg2Si alloy with combined Zr and Sb additions

Journal of Alloys and Compounds

DOI

2018

The superior elevated-temperature mechanical properties of Al-Cu-Mg-Si composites reinforced with in situ hybrid-sized TiCx-TiB2 particles

Materials Science and Engineering A

DOI

2018

Preparation and characterization of the Al-Cu-Mg-Si-Mn composites reinforced by different surface modified SiCp

Materials Characterization

DOI

2018

Enhanced elevated-temperature mechanical properties of Al-Mn-Mg containing TiC nano-particles by pre-strain and concurrent precipitation

Materials Science and Engineering A

DOI

2018

Fabrication and characterization of robust freeze-cast alumina scaffolds with dense ceramic walls and controllable pore sizes

Journal of Materials Science

DOI

2018

Effects of nanosized TiCp on the microstructure evolution and tensile properties of an Al-Mg-Si alloy during cold rolling

Materials Science and Engineering A

DOI

2018

Simultaneously Enhanced Strength, Toughness and Ductility of Cast 40Cr Steels Strengthened by Trace Biphase TiCx-TiB2 Nanoparticles

Metals

DOI

2018

Fabrication, microstructure refinement and strengthening mechanisms of nanosized SiCP/Al composites assisted ultrasonic vibration

Materials Science and Engineering A

DOI

2018

Effects of Carbon Source on TiC Particles’ Distribution, Tensile, and Abrasive Wear Properties of In Situ TiC/Al-Cu Nanocomposites Prepared in the Al-Ti-C System

Nanomaterials

DOI

2018

Al–7Si–5Cu/Al2O3–ZrO2 Laminated Composites with Excellent and Anisotropic Wear Resistance

Advanced Engineering Materials

DOI

2018

Microstructures and Compressive Properties of Al Matrix Composites Reinforced with Bimodal Hybrid In-Situ Nano-/Micro-Sized TiC Particles

Materials

DOI

2018

Nacre-inspired lightweight and high-strength AZ91D/Mg2B2O5w composites prepared by ice templating and pressureless infiltration

Journal of Materials Science

DOI

2018

The role of TiO2 incorporation in the preparation of B4C/Al laminated composites with high strength and toughness

Ceramics International

DOI

2018

Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano‐Sized Particles

Advanced Engineering Materials

DOI

2018

Enhanced strength and ductility at room and elevated temperatures of Al-Cu alloy matrix composites reinforced with bimodal-sized TiCp compared with monomodal–sized TiCp

Materials Science and Engineering A

DOI

2018

Superior Cryogenic Tensile Strength and Ductility of In Situ Al–Cu Matrix Composite Reinforced with 0.3 wt% Nano‐Sized TiCp

Advanced Engineering Materials

DOI

2018

Effects of ceramic lamellae compactness and interfacial reaction on the mechanical properties of nacre-inspired Al/Al2O3–ZrO2 composites

Materials Science and Engineering A

DOI

2018

Simultaneously increasing the high-temperature tensile strength and ductility of nano-sized TiCp reinforced Al-Cu matrix composites

Materials Science and Engineering A

DOI

2018

Current-driven spontaneous infiltration of molten Al into a porous PSZ preform with a lamellar structure

Materials Letters

DOI

2018

The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys

Journal of Alloys and Compounds

DOI

2018

Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment

Materials

DOI

2018

Achieving bimodal microstructure and enhanced tensile properties of Mg–9Al–1Zn alloy by tailoring deformation temperature during hard plate rolling (HPR)

Journal of Alloys and Compounds

DOI

2018

Corrigendum to “Development of a novel strength ductile Mg–7Al–5Zn alloy with high superplasticity processed by hard-plate rolling (HPR)” [J. Alloys Comp. 738 (2018) 246–254]

Journal of Alloys and Compounds

DOI

2018

Effects of ternary element additions on the generalized-stacking fault energy of Ti5Si3 in prismatic {11¯00}[0001] slip system: A first-principles study

Computational Materials Science

DOI

2018

Effect of tensile direction on mechanical properties and microstructural evolutions of rolled Mg-Al-Zn-Sn magnesium alloy sheets at room and elevated temperatures

Journal of Alloys and Compounds

DOI

2018

Formation mechanism and control of a large-scale lamellar structure in freeze-cast Al 2 O 3 ceramics under dual temperature gradients

Journal of the European Ceramic Society

DOI

2018

Microstructure and tensile properties of rolled Mg-4Al-2Sn-1Zn alloy with pre-rolling deformation

Materials Science and Engineering A

DOI

2017

Superior high creep resistance of in situ nano-sized TiCx/Al-Cu-Mg composite

Scientific Reports

DOI

2017

High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure

Materials Science and Engineering A

DOI

2017

Microstructures and Tensile Properties of Al–Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process

Metals

DOI

2017

The Relationship Between Oxidation and Thermal Fatigue of Martensitic Hot-Work Die Steels

Acta Metallurgica Sinica (English Letters)

DOI

2017

Improved creep resistance of Al-Cu alloy matrix composite reinforced with bimodal-sized TiCp

Materials Science and Engineering A

DOI

2017

Improved ductility and toughness of an Al-Cu casting alloy by changing the geometrical morphology of dendritic grains

Materials Letters

DOI

2017

Strain-induced precipitation kinetics during non-isothermal annealing of Al-Mn alloys

Journal of Alloys and Compounds

DOI

2017

Effects of TiB 2 /TiC x ratios on compression properties and abrasive wear resistance of in situ 50 vol.-% (TiB 2 –TiC x )/Al–Cu composites

Powder Metallurgy

DOI

2017

The Dry Sliding Wear Properties of Nano-Sized TiCp/Al-Cu Composites at Elevated Temperatures

Materials

DOI

2017

Electrochemically-driven direct joining of Ni and ZrO2

Scripta Materialia

DOI

2017

Mechanical properties and abrasive wear behaviors of in situ nano-TiC x /Al–Zn–Mg–Cu composites fabricated by combustion synthesis and hot press consolidation

Archives of Civil and Mechanical Engineering

DOI

2017

Microstructures and tensile properties of nano-sized SiC p /Al-Cu composites fabricated by semisolid stirring assisted with hot extrusion

Materials Characterization

DOI

2017

Superior creep resistance of 0.3 wt% nano-sized TiCp/Al-Cu composite

Materials Science and Engineering A

DOI

2017

The abrasive wear behavior of Al2014 composites reinforced with Ti5Si3-coated SiCP

Tribology International

DOI

2017

Morphology Evolution on the Fracture Surface and Fracture Mechanisms of Multiphase Nanostructured ZrCu-Base Alloys

Materials

DOI

2017

High compressive strength in nacre-inspired Al−7Si−5Cu/Al 2 O 3 –ZrO 2 composites at room and elevated temperatures by regulating interfacial reaction

Ceramics International

DOI

2017

The microstructure and tensile property for Al2014 composites reinforced with Ti5Si3-coated SiCP

Materials Science and Engineering A

DOI

2017

Simultaneously increasing the elevated-temperature tensile strength and plasticity of in situ nano-sized TiCx/Al-Cu-Mg composites

Materials Characterization

DOI

2017

3D long-range ordered porous ceramics prepared by a novel bidirectional freeze-casting technique

Ceramics International

DOI

2017

Effects of Ti, Si, Mg and Cu additions on interfacial properties and electronic structure of Al(111)/4H-SiC(0001) interface: A first-principles study

Applied Surface Science

DOI

2017

Development of a novel strength ductile Mg–7Al–5Zn alloy with high superplasticity processed by hard-plate rolling (HPR)

Journal of Alloys and Compounds

DOI

2017

Bimodal microstructure – A feasible strategy for high-strength and ductile metallic materials

Journal of Material Science and Technology

DOI

2017

Polarity effects on the wettability and interfacial chemistry at Cu–YSZ interface by applying a direct current

Journal of the European Ceramic Society

DOI

2017

High strength and ductile high solid solution Al–Mg alloy processed by a novel hard-plate rolling route

Journal of Alloys and Compounds

DOI

2017

Prominent role of a high volume fraction of Mg17Al12 particles on tensile behaviors of rolled Mg–Al–Zn alloys

Journal of Alloys and Compounds

DOI

2017

Effects of Zn on the microstructure and tensile properties of as-extruded Mg-8Al-2Sn alloy

Materials Science and Engineering A

DOI

2017

Tensile properties, texture evolutions and deformation anisotropy of as-extruded Mg-6Zn-1Zr magnesium alloy at room and elevated temperatures

Materials Science and Engineering A

DOI

2017

Achieving fine grain structure and superplasticity in AZ91-0.4Sn magnesium alloy using short flow rolling process

Materials Science and Engineering A

DOI

2017

Growth of Mg 2 Si crystals shaped by {100} and {111} facets from Al–Mg–Si melts in the presence of calcium

CrystEngComm

DOI

2017

Morphology evolution of primary Mg 2 Si in Al–20Mg 2 Si–0.1Ca alloys prepared with various solidification cooling rates

CrystEngComm

DOI

2017

Refinement and modification of primary Mg 2 Si in an Al–20Mg 2 Si alloy by a combined addition of yttrium and antimony

CrystEngComm

DOI

2016

Fabrication of 2014 aluminum matrix composites reinforced with untreated and carboxyl-functionalized carbon nanotubes

Journal of Alloys and Compounds

DOI

2016

The interfacial structure and mechanical properties of Ti5Si3-coated SiCP/Al2014 composites fabricated by powder metallurgy with hot pressing

Materials Science and Engineering A

DOI

2016

Superior tensile properties of in situ nano-sized TiCp/Al-Cu composites fabricated by reaction in melt method

Materials Science and Engineering A

DOI

2016

Spheroidization of primary Mg2Si in Al-20Mg2Si-4.5Cu alloy modified with Ca and Sb during T6 heat treatment process

Materials Science and Engineering A

DOI

2016

Excellent compressive strength and ductility of Ti5Si3–coated SiCP/Al2014 composites

Journal of Alloys and Compounds

DOI

2016

Wear and Corrosion Behavior of Functionally Graded Nano-SiC/2014Al Composites Produced by Powder Metallurgy

Journal of Materials Engineering and Performance

DOI

2016

Developing high toughness and strength Al/TiC composites using ice-templating and pressure infiltration

Ceramics International

DOI

2016

Effect of Pre-Oxidation Treatment of Nano-SiC Particulates on Microstructure and Mechanical Properties of SiC/Mg-8Al-1Sn Composites Fabricated by Powder Metallurgy Combined with Hot Extrusion

Materials

DOI

2016

Effect of differential speed rolling on the room and elevated temperature tensile properties of rolled AZ31 Mg alloy sheets

Materials Characterization

DOI

2016

Effect of Rolling Route on Microstructure and Tensile Properties of Twin-Roll Casting AZ31 Mg Alloy Sheets

Materials

DOI

2016

Influence of Li2Sb Additions on Microstructure and Mechanical Properties of Al-20Mg2Si Alloy

Materials

DOI

2016

Reactive wetting of amorphous silica by molten Al–Mg alloys and their interfacial structures

Applied Surface Science

DOI

2016

The effect of Sb addition on microstructures and tensile properties of extruded Al–20Mg2Si–4Cu alloy

Materials Science and Engineering A

DOI

2016

Effects of doping atoms (Sb, Te, Sn, P and Bi) on the equilibrium shape of Mg 2 Si from first-principles calculations

CrystEngComm

DOI

2016

Lamellar-interpenetrated Al−Si−Mg/Al2O3−ZrO2 composites prepared by freeze casting and pressureless infiltration

Ceramics International

DOI

2016

Effects of different carbon sources on the compressive properties of in situ high-volume-fraction TiC x /2009Al composites

Powder Metallurgy

DOI

2016

Fabrication of Nano-SiC Particulate Reinforced Mg-8Al-1Sn Composites by Powder Metallurgy Combined with Hot Extrusion

Journal of Materials Engineering and Performance

DOI

2016

Significant improvement in the wettability of ZrO2 by molten Al under the application of a direct current

Materials & Design

DOI

2016

Fabrication of a 2014Al-SiC/2014Al Sandwich Structure Composite with Good Tensile Strength and Ductility

Journal of Materials Engineering and Performance

DOI

2016

Preparation of nacre-like composites by reactive infiltration of a magnesium alloy into porous silicon carbide derived from ice template

Materials Letters

DOI

2016

Aging Behavior of Nano-SiC/2014Al Composite Fabricated by Powder Metallurgy and Hot Extrusion Techniques

Journal of Material Science and Technology

DOI

2016

Processing and mechanical properties of lamellar-structured Al–7Si–5Cu/TiC composites

Materials & Design

DOI

2016

Effects of oxide addition on the microstructure and mechanical properties of lamellar SiC scaffolds and Al–Si–Mg/SiC composites prepared by freeze casting and pressureless infiltration

Ceramics International

DOI

2016

Fabrication and Properties of Nano-TiCx/Cu-Cr-Zr Alloy Composites

MATEC Web of Conferences

DOI

2015

Tensile properties and work-hardening behaviours of Al–Cu alloys modified by Al84Ni10La6metallic glass

International Journal of Cast Metals Research

DOI

2015

Nano-SiC p /Al2014 composites with high strength and good ductility

Science and Engineering of Composite Materials

DOI

2015

The superior ductility of fine SiC p /Al2014 composites after extrusion

Science and Engineering of Composite Materials

DOI

2015

Heterogeneous nucleation of Mg 2 Si on CaSb 2 nucleus in Al–Mg–Si alloys

CrystEngComm

DOI

2015

The role of CuO–TiO2 additives in the preparation of high-strength porous alumina scaffolds using directional freeze casting

Journal of Porous Materials

DOI

2015

Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process

Scientific Reports

DOI

2015

Grain refinement behavior of Al–Cu alloys inoculated by various metallic glasses

Materials Chemistry and Physics

DOI

2015

A comparison of microstructure and mechanical properties of Mg–9Al–1Zn sheets rolled from as-cast, cast-rolling and as-extruded alloys

Materials & Design

DOI

2015

Achieving a weak basal texture in a Mg–6Al–3Sn alloy by wave-shaped die rolling

Materials & Design

DOI

2015

Superior strength and ductility of the Al–Cu alloys inoculated by Zr-based metallic glass at elevated temperatures

Materials Science and Engineering A

DOI

2015

Influence of SiC surface polarity on the wettability and reactivity in an Al/SiC system

Applied Surface Science

DOI

2015

Microstructure evolution and tensile properties of hot rolled Mg–6Al–3Sn alloy sheet at elevated temperatures

Materials Science and Engineering A

DOI

2015

Generalized-stacking-fault energy and twin-boundary energy of hexagonal close-packed Au: A first-principles calculation

Scientific Reports

DOI

2015

Effects of composition and sintering temperature on the structure and compressive property of the lamellar Al2O3–ZrO2 scaffolds prepared by freeze casting

Journal of Materials Science

DOI

2015

Effects of distributions of Al, Zn and Al+Zn atoms on the strengthening potency of Mg alloys: A first-principles calculations

Computational Materials Science

DOI

2015

Simultaneously increasing strength and ductility of the Al–Cu alloys inoculated by Zr-based metallic glass

Materials Characterization

DOI

2015

A Novel Approach of Using Ground CNTs as the Carbon Source to Fabricate Uniformly Distributed Nano-Sized TiCx/2009Al Composites

Materials

DOI

2015

Effect of Mn, Fe and Co on the compression strength and ductility of in situ nano-sized TiB2/TiAl composites

SpringerPlus

DOI

2015

Effect of Ceramic Content on the Compression Properties of TiB2-Ti2AlC/TiAl Composites

Metals

DOI

2015

Effects of Ti-coating layer on the distribution of SiCP in the SiCP/2014Al composites

Materials & Design

DOI

2015

Effect of Al addition on the microstructures and compression properties of (TiCxNy–TiB2)/Ni composites fabricated by combustion synthesis and hot press

Powder Technology

DOI

2015

Microstructure and tensile properties of in situ synthesized nano-sized TiCx/2009Al composites

Materials & Design (1980-2015)

DOI

2015

Study of effect of Zr addition on the microstructures and mechanical properties of (TiCx–TiB2)/Cu composites by combustion synthesis and hot press consolidation in the Cu–Ti–B4C–Zr system

Materials Research Bulletin

DOI

2015

Microstructures and mechanical properties of the Al2014 composites reinforced with bimodal sized SiC particles

Materials Science and Engineering A

DOI

2015

Lamellar-interpenetrated Al–Si–Mg/SiC composites fabricated by freeze casting and pressureless infiltration

Materials Science and Engineering A

DOI

2015

High strength and good ductility at elevated temperature of nano-SiCp/Al2014 composites fabricated by semi-solid stir casting combined with hot extrusion

Materials Science and Engineering A

DOI

2014

Tensile Deformation Behaviors in a Fine‐Grained, Rolled Mg–3Al–3Sn Alloy at Room Temperature up to 250 °C

Advanced Engineering Materials

DOI

2014

Microstructure evolution and mechanical properties of Al–Cu alloys inoculated by FeBSi metallic glass

Materials & Design (1980-2015)

DOI

2014

Effects of Fe, Co and Ni elements on the ductility of TiAl alloy

Journal of Alloys and Compounds

DOI

2014

Age Hardening and Mechanical Properties of Cast AlCu Alloy Modified by La and Pr

Advanced Engineering Materials

DOI

2014

Effects of RExOy addition on corrosion behavior of the Al–Cu alloys in 3.5wt.% NaCl solution and pH=4 acid solution

Applied Surface Science

DOI

2014

Slip-induced texture evolution of rolled Mg–6Al–3Sn alloy during uniaxial tension along rolling and transverse directions

Materials Science and Engineering A

DOI

2014

Effects of reinforcement surface modification on the microstructures and tensile properties of SiCp/Al2014 composites

Materials Science and Engineering A

DOI

2014

The nano-sized TiC particle reinforced Al–Cu matrix composite with superior tensile ductility

Materials Science and Engineering A

DOI

2014

A New Approach to Refine Grains in Al Alloys

Advanced Engineering Materials

DOI

2014

Manufacture of Nano-Sized Particle-Reinforced Metal Matrix Composites: A Review

Acta Metallurgica Sinica (English Letters)

DOI

2014

Preparation of High-Strength Al–Mg–Si/Al2O3 Composites with Lamellar Structures Using Freeze Casting and Pressureless Infiltration Techniques

Acta Metallurgica Sinica (English Letters)

DOI

2014

Effect of Cr Content on the Compression Properties and Abrasive Wear Behavior of the High-Volume Fraction (TiC–TiB2)/Cu Composites

Acta Metallurgica Sinica (English Letters)

DOI

2014

Wetting of polycrystalline SiC by molten Al and Al−Si alloys

Applied Surface Science

DOI

2014

Effects of TiB2 content and alloy elements (Mg, Mo, V) on the compression properties of high-volume-fraction TiB2/Al composites

Materials Science and Engineering A

DOI

2014

Effect of structural transition in an amorphous Ni80P20 alloy on the wetting by a eutectic Sn–Bi solder

Journal of Materials Science

DOI

2013

Age hardening and creep resistance of cast Al–Cu alloy modified by praseodymium

Materials Characterization

DOI

2013

Microstructure and mechanical properties of Mg–5Sn alloy fabricated by a centrifugal casting method

Materials Letters

DOI

2013

Morphology and size control of octahedral and cubic primary Mg 2 Si in an Mg–Si system by regulating Sr contents

CrystEngComm

DOI

2013

Effect of strain rate on the compression behavior of TiAl and TiAl–2Mn alloys fabricated by combustion synthesis and hot press consolidation

Intermetallics

DOI

2013

First-principles calculations of generalized stacking fault energy in Mg alloys with Sn, Pb and Sn+Pb dopings

Materials Science and Engineering A

DOI

2013

First-principles study of generalized-stacking-fault (GSF) energy in Mg with Al and Zn alloyings

Journal of Alloys and Compounds

DOI

2013

Effects of doping atoms on the generalized stacking-fault energies of Mg alloys from first-principles calculations

Scripta Materialia

DOI

2013

Effect of oxygen content on the microstructure, compression properties and work-hardening behaviors of ZrCuAlNi glassy composites

Materials Science and Engineering A

DOI

2013

Deformation mechanisms of a rolled Mg–6Al–3Sn alloy during plane strain compression

Materials Science and Engineering A

DOI

2013

Twinning and mechanical behavior of an extruded Mg–6Al–3Sn alloy with a dual basal texture

Materials Science and Engineering A

DOI

2013

Wettability in reactive Sn-base alloy/Ni-base metallic glass systems

Applied Surface Science

DOI

2013

Wetting of WC by a Zr-base metallic glass-forming alloy

Materials Chemistry and Physics

DOI

2013

Simultaneously increasing the strength and ductility of nano-sized TiN particle reinforced Al–Cu matrix composites

Materials Science and Engineering A

DOI

2013

Wetting and adhesion at Mg/MgO interfaces

Journal of Materials Science

DOI

2013

Reactive wetting in liquid magnesium/silica and magnesium/silicon systems

Applied Surface Science

DOI

2013

Reaction behaviour, microstructure and mechanical properties of TiC–TiB2/Ni composite fabricated by pressure assisted self-propagating high-temperature synthesis in air and vacuum

Materials & Design (1980-2015)

DOI

2012

Comparative study of the compression properties of TiAl matrix composites reinforced with nano-TiB2 and nano-Ti5Si3 particles

Materials Science and Engineering A

DOI

2012

Effects of La on the age hardening behavior and precipitation kinetics in the cast Al–Cu alloy

Journal of Alloys and Compounds

DOI

2012

Synthesis of octahedron and truncated octahedron primary Mg2Si by controlling the Sb contents

CrystEngComm

DOI

2012

Effect of c/a axial ratio on Schmid factors in hexagonal close-packed metals

Scripta Materialia

DOI

2012

Strong strain hardening ability in an as-cast Mg–3Sn–1Zn alloy

Materials Letters

DOI

2012

Reaction Pathway of Combustion Synthesis of Ti 5 Si 3 in Cu–Ti–Si System

Journal of the American Ceramic Society

DOI

2012

Effect of stoichiometry on the surface energies of {100} and {111} and the crystal shape of TiCx and TiNx

CrystEngComm

DOI

2012

Influence of grain size on strain rate sensitivity in rolled Mg–3Al–3Sn alloy at room temperature

Scripta Materialia

DOI

2012

Effect of B4C size on the fabrication and compression properties of in situ TiB2–Ti2AlC/TiAl composites

Journal of Alloys and Compounds

DOI

2012

Modification of Primary Mg2Si in Mg-4Si Alloys with Antimony

Metallurgical and Materials Transactions A

DOI

2012

Wetting of amorphous and nanocrystalline Ni 75 B 15 Si 10 substrates by molten Sn

Surface and Interface Analysis

DOI

2012

Effects of multi-modification of rare earth oxides PrxOy and LaxOy on microstructure and tensile properties of casting Al–Cu alloy

Materials Science and Engineering A

DOI

2012

Wetting of (0001) α-alumina single crystals by molten Mg–Al alloys in the presence of evaporation

Journal of Materials Science

DOI

2012

Analysis of effects of reactant particle size on phase transformations in the Ti–Si–Cu system using differential thermal analysis and x-ray diffraction

Journal of materials research/Pratt's guide to venture capital sources

DOI

2012

Calculation of Schmid factors in magnesium: Analysis of deformation behaviors

Scripta Materialia

DOI

2012

A Common Regularity of Stoichiometry-Induced Morphology Evolution of Transition Metal Carbides, Nitrides, and Diborides during Self-Propagating High-Temperature Synthesis

Crystal Growth & Design

DOI

2012

Study of effect of Mn addition on the mechanical properties of Ti2AlC/TiAl composites through first principles study and experimental investigation

Intermetallics

DOI

2012

Effect of Ni content on the compression properties and abrasive wear behavior of the (TiB2–TiCxNy)/Ni composites

International Journal of Refractory Metals and Hard Materials

DOI

2012

Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction

Materials Science and Engineering A

DOI

2012

Strong strain hardening ability in an as-cast Mg–3Al–3Sn alloy

Materials Chemistry and Physics

DOI

2012

Synthesis of spherical NbB2−x particles by controlling the stoichiometry

CrystEngComm

DOI

2012

Effect of reactant C/Ti ratio on the stoichiometry, morphology of TiCx and mechanical properties of TiCx–Ni composite

CrystEngComm

DOI

2012

Effect of W content on the compression properties and abrasive wear behavior of the (TiB2–TiCxNy)/(Ni+W) composites

Materials & Design (1980-2015)

DOI

2012

Wetting and reaction of molten La with poly- and mono-crystalline MgO at 1323 K

Journal of Materials Science

DOI

2012

Fabrication of in situ TiC locally reinforced manganese steel matrix composite via combustion synthesis during casting

Materials & Design (1980-2015)

DOI

2012

Heterogeneous nucleation of Mg2Si on Sr11Sb10 nucleus in Mg–x(3.5, 5 wt.%)Si–1Al alloys

Materials Chemistry and Physics

DOI

2012

Compression properties and abrasive wear behavior of high volume fraction TiCx–TiB2/Cu composites fabricated by combustion synthesis and hot press consolidation

Materials & Design (1980-2015)

DOI

2012

Different strain-rate dependent compressive properties and work-hardening capacities of 50 vol% TiC /Al and TiB2/Al composites

Materials Science and Engineering A

DOI

2011

Wetting and evaporation behaviors of molten Mg–Al alloy drops on partially oxidized α-SiC substrates

Materials Chemistry and Physics

DOI

2011

Effect of Cr on the wetting in Cu/graphite system

Applied Surface Science

DOI

2011

Enhanced ductility in a Zr65Cu15Al10Ni10 bulk metallic glass by nanocrystallization during compression

Materials & Design (1980-2015)

DOI

2011

Self-propagating high-temperature synthesis of nano-TiC x particles with different shapes by using carbon nano-tube as C source

Nanoscale Research Letters

DOI

2011

Influence of grain size on deformation mechanisms in rolled Mg–3Al–3Sn alloy at room temperature

Materials Science and Engineering A

DOI

2011

Effects of Ni addition on the microstructure and compressive deformation behavior in Zr–Cu–Ni martensitic alloys

Materials & Design (1980-2015)

DOI

2011

Pinning–depinning behavior in the wetting of (0 0 0 1) α-Al2O3 single crystal by molten Mg

Applied Surface Science

DOI

2011

First-principles study of the generalized stacking fault energy in Mg–3Al–3Sn alloy

Scripta Materialia

DOI

2011

Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti–Al–Nb–C system

Materials & Design (1980-2015)

DOI

2011

Wettability of amorphous and nanocrystalline Fe78B13Si9 substrates by molten Sn and Bi

Nanoscale Research Letters

DOI

2011

Temperature Dependence of the Wettability between Glass‐Forming Alloy Zr 55 Cu 30 Al 10 Ni 5 and Polycrystalline ZrO 2

Journal of the American Ceramic Society

DOI

2011

The mechanism of thermal explosion (TE) synthesis of TiC–TiB2 particulate locally reinforced steel matrix composites from an Al–Ti–B4C system via a TE-casting route

Materials Chemistry and Physics

DOI

2011

Wetting of B4C, TiC and graphite substrates by molten Mg

Materials Chemistry and Physics

DOI

2011

Reaction path of the synthesis of α-Al2O3-TiC-TiB2 in an Al-TiO2-B4C system

International Journal of Refractory Metals and Hard Materials

DOI

2010

Al-Ti-C体系自蔓延高温合成TiC的形态演变

《河北科技大学学报》

2010

变质处理对高强度灰铸铁钻削加工性能的影响

《铸造》

2010

原位镁基复合材料的研究进展

《中国材料进展》

2010

变质处理对高强度灰铸铁车削加工性能的影响

《现代铸铁》

2010

Wetting of TiC by molten Al at 1123–1323K

Acta Materialia

DOI

2010

Wetting and evaporation behaviors of molten Mg on partially oxidized SiC substrates

Applied Surface Science

DOI

2010

High room-temperature plastic and work-hardening effect of the NiAl-matrix composites reinforced by particulates

Intermetallics

DOI

2010

Warping of triple line in the wetting of B 4 C by a Cu‐1 at.% Cr alloy

Surface and Interface Analysis

DOI

2010

Effects of La addition on the elevated temperature properties of the casting Al–Cu alloy

Materials Science and Engineering A

DOI

2010

The mechanism of combustion synthesis of (TiCxNy-TiB2)/Ni from a Ni-Ti-C-BN system

Powder Technology

DOI

2010

Wetting of microcrystalline and nanocrystalline Ni substrates by molten Sn–3.5Ag–0.7Cu alloy

Materials Letters

DOI

2010

Reaction pathway and phase transitions in Al–Ti–Si system during differential thermal analysis

Solid State Sciences

DOI

2010

Wetting of Cu substrates with micrometer and nanometer grains by molten Sn‐3.5Ag‐0.7Cu alloy

Surface and Interface Analysis

DOI

2010

Effect of substrate annealing on the wetting of metastable BNi-2 ribbons by molten Sn

Journal of Applied Physics

DOI

2010

Wetting of polycrystalline MgO by molten Mg under evaporation

Materials Chemistry and Physics

DOI

2010

Growth Mechanism of TiCx during Self-Propagating High-Temperature Synthesis in an Al−Ti−C System

Crystal Growth & Design

DOI

2010

High volume fraction TiCx/Al composites with good comprehensive performance fabricated by combustion synthesis and hot press consolidation

Materials Science and Engineering A

DOI

2010

First-principles study of the structural and elastic properties of Ti5Si3 with substitutions Zr, V, Nb, and Cr

Journal of materials research/Pratt's guide to venture capital sources

DOI

2010

Effects of alloy elements (Mg, Zn, Sn) on the microstructures and compression properties of high-volume-fraction TiCx/Al composites

Scripta Materialia

DOI

2010

Wetting of porous graphite by Cu–Ti alloys at 1373 K

Materials Chemistry and Physics

DOI

2010

EFFECT OF Al CONTENT ON THE COMBUSTION SYNTHESIS OF ( TiB 2- Al 2 O 3)/ Al PRODUCTS FROM AN Al - TiO 2- B 2 O 3 SYSTEM

International Journal of Modern Physics B

DOI

2010

Wetting of Polycrystalline α-Al2O3 by Molten Mg in Ar Atmosphere

Metallurgical and Materials Transactions A

DOI

2009

变质及热处理对过共晶铝硅合金组织与滑动磨损性能的影响

《金属加工(热加工)》

2009

Thermal Explosion Reaction in the Ti-C System under Air Atmosphere

Metallurgical and Materials Transactions A

DOI

2009

Role of Fe incorporation in the self-propagating high-temperature synthesis reaction in an Al–Ti–B4C system

Journal of materials research/Pratt's guide to venture capital sources

DOI

2009

Microstructures and Mechanical Properties of ZrC Reinforced (Zr‐Ti)‐Al‐Ni‐Cu Glassy Composites by an In Situ Reaction

Advanced Engineering Materials

DOI

2009

Al content dependence of reaction behaviors and mechanism in combustion synthesis of TiB2–AlN-based composites

Chemical Engineering Journal

DOI

2009

Morphology Evolution of TiCx Grains During SHS in an Al−Ti−C System

Crystal Growth & Design

DOI

2009

Effect of nickel addition on the exothermic reaction of the Ti–C–BN system

International Journal of Refractory Metals and Hard Materials

DOI

2009

Electronic structure and phase stability during martensitic transformation in Al-doped ZrCu intermetallics

Journal of Alloys and Compounds

DOI

2009

Evaporation-coupled wetting of ZrO2 by molten Mg in Ar atmosphere

Applied Physics A

DOI

2009

Wettability and reactivity between B4C and molten Zr55Cu30Al10Ni5 metallic glass alloy

Materials Chemistry and Physics

DOI

2009

Reactive wetting of polycrystalline TiC by molten Zr55Cu30Al10Ni5 metallic glass alloy

Journal of materials research/Pratt's guide to venture capital sources

DOI

2009

Self-propagating high-temperature synthesis of TiCxNy–TiB2 ceramics from a Ti–B4C–BN system

International Journal of Refractory Metals and Hard Materials

DOI

2009

EFFECT OF SCANDIUM ON THE CORROSION BEHAVIOR OF THE CASTING Al - Cu ALLOYS IN NACL SOLUTION

International Journal of Modern Physics B

DOI

2009

Microstructural evolution behavior of Mg–5Si–1Al alloy modified with Sr–Sb during isothermal heat treatment

Journal of Alloys and Compounds

DOI

2009

Combustion synthesis of Ti(C, N)–TiB2 from a Ti–C–BN system

Journal of Alloys and Compounds

DOI

2009

Wetting of polycrystalline W by molten Zr55Al10Ni5Cu30 alloy

Materials Chemistry and Physics

DOI

2009

Effect of reactant C/Ti ratio on the stoichiometry of Combustion-synthesized TiCx in Ti-C system

Journal of the Ceramic Society of Japan

DOI

2009

Influences of Morphology and Size of Mg2Si on Microstructural Evolution of Mg–6.2Si Alloys during Partial Remelting

ISIJ International

DOI

2009

High creep resistance behavior of the casting Al–Cu alloy modified by La

Scripta Materialia

DOI

2009

Wetting of polycrystalline B4C by molten Al at 1173–1473K

Scripta Materialia

DOI

2009

Microstructure characteristics of products in Ti–Si system via combustion synthesis reaction

Journal of Materials Science

DOI

2009

Fabrication of in Situ TiSi (Ti5Si3, TiSi)/TiC Local Reinforced Steel Matrix Composite via Combustion Synthesis

ISIJ International

DOI

2008

自蔓延高温原位合成ZrC/Cu复合材料

《功能材料》

2008

Influence of melt superheating on microstructures of Mg-3.5Si-1Al alloys

Transactions of Nonferrous Metals Society of China

DOI

2008

Synthesis and mechanical properties of TiC-reinforced Cu-based bulk metallic glass composites

Scripta Materialia

DOI

2008

Reaction Behavior and Mechanism during Self-Propagating High-Temperature Synthesis Reaction in an Al-TiO2-B4C System

Metallurgical and Materials Transactions B

DOI

2008

Numerical Simulation of Temperature and Thermal Stress Fields in Cast-hot-working-die Steel under High Density Electropulsing

ISIJ International

DOI

2008

In Situ TiC/TiB 2 Particulate Locally Reinforced Steel Matrix Composites Fabricated Via the SHS Reaction of Ni–Ti–B 4 C System

International Journal of Applied Ceramic Technology

DOI

2008

Fabrication of Steel Matrix Composite Locally Reinforced with in Situ TiC Particulate via SHS Reaction of (Ti, Fe)–C System during Casting

ISIJ International

DOI

2008

Dependence of the SHS reaction behavior and product on B4C particle size in Al–Ti–B4C and Al–TiO2–B4C systems

Materials Research Bulletin

DOI

2008

Wetting of Polycrystalline α-Al2O3 by Molten Zr55Cu30Al10Ni5 Metallic Glass Alloy

Metallurgical and Materials Transactions A

DOI

2008

The correlation between the formation of different martensitic structures and the cooling rates in ZrCuAlNiO alloy during solidification

Journal of Alloys and Compounds

DOI

2008

Lattice Parameter and Stoichiometry of TiC x Produced in Alloyed Ti–C Systems by Self‐Propagating High‐Temperature Synthesis

Journal of the American Ceramic Society

DOI

2008

Effect of TiO2 addition on the combustion synthesis in the Ti–B4C system

Journal of materials research/Pratt's guide to venture capital sources

DOI

2008

Strong work-hardening effect in a multiphase ZrCuAlNiO alloy

Applied Physics Letters

DOI

2008

Simultaneously increasing the strength and ductility of the modified casting Al–Cu alloy

Journal of materials research/Pratt's guide to venture capital sources

DOI

2008

Influence of Al content on the microstructure and mechanical property of the (Zr2Cu)100−xAlx alloys

Journal of Alloys and Compounds

DOI

2008

Combustion synthesis of TiCx–TiB2 composites with hypoeutectic, eutectic and hypereutectic microstructures

Journal of the European Ceramic Society

DOI

2008

Effect of Tempering on Microstructure and Mechanical Properties in a Multiphase ZrCuAlNiO Alloy

ISIJ International

DOI

2008

Lattice Parameter and Stoichiometry of TiC x Produced in the Ti–C and Ni–Ti–C Systems by Self‐Propagating High‐Temperature Synthesis

Journal of the American Ceramic Society

DOI

2007

颗粒增强Cu基点焊电极复合材料的现状及展望

《焊接》

2007

Modification of primary Mg2Si in Mg-5Si alloys with Y2O3

Transactions of Nonferrous Metals Society of China

2007

Research on Thermal Wear of Cast Hot Forging Die Steel Modified by Rare Earths

Journal of Rare Earths

2007

Effect of second phase precipitation behavior on mechanical properties of casting Al-Cu alloys

Transactions of Nonferrous Metals Society of China

2007

Thermal explosion synthesis of aluminum matrix composites reinforced with TiC-TiB2ceramic particulates

Transactions of Nonferrous Metals Society of China

2007

Effects of different processing parameters on the semisolid microstructure of the AZ91D alloy during partial remelting

Journal of Alloys and Compounds

DOI

2007

Reaction path of the synthesis of TiC–TiB2 in Cu–Ti–B4C system

International Journal of Refractory Metals and Hard Materials

DOI

2007

Effect of nickel addition on the exothermic reaction of titanium and boron carbide

Journal of materials research/Pratt's guide to venture capital sources

DOI

2007

Fabrication of TiC and TiB2 locally reinforced steel matrix composites using a Fe–Ti–B4C–C system by an SHS-casting route

Journal of Materials Science

DOI

2007

Effects of C particle size on the ignition and combustion characteristics of the SHS reaction in the 20wt.% Ni–Ti–C system

Journal of Alloys and Compounds

DOI

2007

Effect of C particle size on the porous formation of TiC particulate locally reinforced steel matrix composites via the SHS reaction of Ni–Ti–C system during casting

Materials Science and Engineering A

DOI

2007

In Situ Synthesis of Ti5Si3 Intermetallic Particulate Locally Reinforced Medium Carbon Steel-matrix Composite via the SHS Reaction of Fe–Ti–Si System during Casting

ISIJ International

DOI

2007

Influence of the amount of KBF4 on the morphology of Mg2Si in Mg–5Si alloys

Materials Chemistry and Physics

DOI

2007

Differential thermal analysis (DTA) on the reaction mechanism in Fe–Ti–B4C system

Journal of Alloys and Compounds

DOI

2007

Reaction synthesis of TiC–TiB2/Al composites from an Al–Ti–B4C system

Journal of Materials Science

DOI

2007

Effect of Cu content on the reaction behaviors of self-propagating high-temperature synthesis in Cu–Ti–B4C system

Journal of Alloys and Compounds

DOI

2007

The in situ synthesis and wear performance of a metal matrix composite coating reinforced with TiC–TiB2 particulates, formed on Ti–6Al–4V alloy by a low oxygen partial pressure fusing technique

Surface and Coatings Technology

DOI

2007

Solidification behavior of cast TiB2 particulate reinforced Mg composites

Materials Science and Engineering A

DOI

2007

Effects of modification and heat-treatment on the abrasive wear behavior of hypereutectic Al–Si alloys

Journal of Materials Science

DOI

2007

Effect of Ni content on the products of Ni–Ti–B system via self-propagating high-temperature synthesis reaction

Journal of Alloys and Compounds

DOI

2007

Development of aluminium composites with in situ formed AlTiSi reinforcements through infiltration

Materials Science and Engineering A

DOI

2006

颗粒增强镁基复合材料的研究现状

《材料科学与工艺》

2006

铸造热锻模具钢的研究与应用

《铸造》

2006

精铸热锻模具钢的合金成分设计及其高温磨损性能研究

《摩擦学学报(中英文)》

DOI

2006

Effect of Y2O3on microstructure and mechanical properties of hypereutectic Al-20%Si alloy

Transactions of Nonferrous Metals Society of China

2006

Effect of predeformation on the globular grains in AZ91D alloy during strain induced melt activation (SIMA) process

Journal of Alloys and Compounds

DOI

2006

Fabrication of steel matrix composites locally reinforced with different ratios of TiC/TiB2 particulates using SHS reactions of Ni–Ti–B4C and Ni–Ti–B4C–C systems during casting

Materials Science and Engineering A

DOI

2006

Reaction mechanism in self-propagating high temperature synthesis of TiC-TiB2/Al composites from an Al-Ti-B4C system

Materials Science and Engineering A

DOI

2006

The sliding wear behavior of TiCp/AZ91 magnesium matrix composites

Journal of Materials Science

DOI

2006

Morphologies of primary silicon in hypereutectic Al–Si alloys with melt overheating temperature and cooling rate

Materials Science and Engineering A

DOI

2006

Effect of Ti/B on fabricating TiB2p/AZ91 composites by employing a TiB2p/Al master alloy

Journal of Alloys and Compounds

DOI

2006

In Situ Production of Locally Reinforced Steel-based Composites with TiC Particulates Using High-frequency Induction Process

ISIJ International

DOI

2005

4Cr3Mo2NiV铸造热锻模具钢的高温磨损机理

《金属学报》

2005

(Ti,Fe)-Al-C体系钢铁基复合材料的热力学计算与分析

《吉林大学学报(工学版)》

2005

新型精铸热锻模具钢高温磨损性能同其显微组织的相关性

《摩擦学学报(中英文)》

2005

精铸模具钢热锻模的应用及寿命的提高

《吉林大学学报(工学版)》

2005

稀土变质热锻模具铸钢高温磨损性能的研究

《中国稀土学报》

2005

Semisolid microstructure evolution of the predeformed AZ91D alloy during heat treatment

Journal of Alloys and Compounds

DOI

2005

Effect of a Current Pulse on the Thermal Fatigue Behavior of Cast Hot Work Die Steel

ISIJ International

DOI

2005

In situ synthesis of TiB2–TiC particulates locally reinforced medium carbon steel–matrix composites via the SHS reaction of Ni–Ti–B4C system during casting

Materials Science and Engineering A

DOI

2005

Fabrication of TiB2 particulate reinforced magnesium matrix composites by two-step processing method

Materials Letters

DOI

2005

Fabrication of steel matrix composites locally reinforced with in situ TiB2–TiC particulates using self-propagating high-temperature synthesis reaction of Al–Ti–B4C system during casting

Composites Part A Applied Science and Manufacturing

DOI

2005

Fabrication of TiCp/Mg composites by powder metallurgy

Journal of Materials Science

DOI

2005

Fabrication of (TiB2 − TiC)p/AZ91 magnesium matrix hybrid composite

Journal of Materials Science

DOI

2005

In-situ Mg2Si/Al-Si-Cu composite modified by strontium

Journal of Materials Science

DOI

2005

In situ TiC-reinforced steel composite fabricated via self-propagating high-temperature synthesis of Ni–Ti–C system

Materials Letters

DOI

2004

外场在材料制备和加工过程中的应用

《铸造》

2004

Fe-C-Ti-Mn合金系中TiC原位生成反应的热力学分析

《吉林大学学报(工学版)》

2004

精铸热锻模具的脆性断裂

《吉林大学学报(工学版)》

2004

精铸热锻模具的应用与改进措施

《农业机械学报》

2004

团球γ+（Fe,Mn）3C/γ钢基自生复合材料的磨损机理及临界载荷确定

《上海交通大学学报》

2004

团球γ+（Fe,Mn）3C/γ自生复合材料强韧与耐磨机制

《工程科学学报》

2004

Effect of new Al–P–Ti–TiC–Y modifier on primary silicon in hypereutectic Al–Si alloys

Materials Letters

DOI

2004

Fabrication of TiB2 particulate reinforced magnesium matrix composites by powder metallurgy

Materials Letters

DOI

2004

Fabrication of B4C particulate reinforced magnesium matrix composite by powder metallurgy

Journal of Alloys and Compounds

DOI

2004

Solid-state reaction behavior of Al–Ti–C powder mixture compacts

Materials Research Bulletin

DOI

2004

Reactive infiltration synthesis of TiB2–TiC particulates reinforced steel matrix composites

Journal of Alloys and Compounds

DOI

2004

Effect of compact density on the fabrication of in situ Mg-TiC composites

Journal of Materials Science

DOI

2004

In situ synthesis of TiB2/Mg composite by self-propagating high-temperature synthesis reaction of the Al–Ti–B system in molten magnesium

Journal of Alloys and Compounds

DOI

2004

Fabrication of TiB2 and TiB2–TiC particulates reinforced magnesium matrix composites

Materials Science and Engineering A

DOI

2004

In situ Mg2Si/Al–Si composite modified by K2TiF6

Materials Letters

DOI

2004

Effect of Ca-Si agent modifier on the granulation of γ+(Fe,Mn)3C eutectic particle in an austenite steel

Journal of Materials Science

DOI

2003

团球γ+（Fe,Mn）3C/γ体钢基自生复合材料的组织与性能

《上海交通大学学报》

2003

我国颗粒增强钢基铸造复合材料研究的现状

《铸造》

2003

耐磨钢中共晶体团球化的研究进展

《钢铁研究学报》

2003

滑动速度对团球共晶体增强奥氏体钢基自生复合材料摩擦学性能的影响

《金属学报》

2003

Cr-Ni-Mo铸造热作模具钢热机械疲劳行为

《金属热处理》

2003

团球共晶体增强奥氏体钢基自生复合材料的干摩擦磨损行为研究

《摩擦学学报(中英文)》

2003

电磁场作用下钢基自生复合材料C、Mn元素偏析及凝固组织

《上海交通大学学报》

2003

Effect of Rare Earth Composite Modification on Microstructure and Properties of a New Cast Hot-Work Die Steel

Journal of Rare Earths

2003

Fabrication of TiCp/Mg composites by the thermal explosion synthesis reaction in molten magnesium

Materials Letters

DOI

2003

Effect of Al content on the self-propagating high-temperature synthesis reaction of Al–Ti–C system in molten magnesium

Journal of Alloys and Compounds

DOI

2003

In situ synthesis of TiC from nanopowders in a molten magnesium alloy

Materials Research Bulletin

DOI

2003

In situ synthesis of TiC/Mg composites in molten magnesium

Scripta Materialia

DOI

2002

稀土复合变质对新型铸造热锻模具钢组织与性能的影响

《中国稀土学报》

2002

热锻模具精密铸造工艺的研究与应用

《铸造》

2002

钇基重稀土合金变质团球γ+（Fe,Mn）3C共晶体增强奥氏体钢基自生复合材料

《中国稀土学报》

2002

抗磨钢的最新进展

《特殊钢》

2002

变质莱氏体钢中共晶碳化物的热处理粒化

《吉林大学学报(工学版)》

2002

热作模具钢在高温热机械应力循环下的疲劳断裂行为

《材料工程》

2002

The characteristics of fatigue under isothermal and thermo‐mechanical load in Cr–Ni–Mo cast hot work die steel

Fatigue & Fracture of Engineering Materials & Structures

DOI

2001

铸造热锻模具的应用及失效分析

《金属热处理》

2001

新型铸造热锻模具钢强韧性本质的探讨

《金属热处理》

2000

具有粒状碳化物的新型莱氏体铸造模具钢的组织与性能

《吉林大学学报(工学版)》

2000

新型铸造热锻模钢回火工艺的选择

《金属热处理》

2000

Influence of Cerium on Solidification Microstructure of M2 High Speed Steel

Journal of Rare Earths

2000

一种新型易割冒口在铸造模具钢生产中的应用

《汽车工艺与材料》

1999

莱氏体型高铬模具钢锻前碳化物形态改善的研究

《钢铁》

1999

变质M2高速钢中共晶碳化物加热团球化的动力学研究

《金属学报》

1999

Si对团球状共晶体奥氏体-贝氏体钢中贝氏体相变的影响

《材料科学与工艺》

1999

团球状共晶体奥氏体-贝氏体钢抗冲击磨料磨损行为

《金属学报》

1999

黑色金属材料及熔炼技术发展战略初探

《铸造》

1999

铈对M2高速钢凝固组织的作用

《中国稀土学报》

1999

具有粒状碳化物的莱氏体型铸造模具钢的耐磨性研究

《摩擦学学报(中英文)》

DOI

1999

冲击磨损下团球状共晶体奥-贝钢磨损表面层组织的变化

《摩擦学学报(中英文)》

DOI

1999

Cr-Mo-Ni系新型铸造热锻模具钢的微合金化

《特殊钢》

1998

新型团球状共晶体奥氏体贝氏体钢及其抗冲击磨料磨损特性

《钢铁》

1998

多元低合金化铸造热锻模具钢(JCD钢)组织与性能的研究

《铸造》

1998

悬浮处理对铸造热锻模具钢组织与性能的影响

《铸造》

1998

变质铸造高铬冷作模具钢的耐磨性研究

《农业机械学报》

1998

Effect of RE on Granulation of Eutectic Carbide in Ledeburite Steel

Journal of Rare Earths

1998

Heterogeneous Nuclei of Intergrowth Eutectic in Austenite-Bainite Steel Modified by Ce and Al

Journal of Rare Earths

1998

蠕墨铸铁刹车鼓耐磨性和冷热疲劳性的研究

《汽车工艺与材料》

1998

稀土对莱氏体钢共晶碳化物粒化的影响

《中国稀土学报》

1997

莱氏体钢中共晶碳化物的热处理粒化

《金属热处理》

1997

泵类铸铁叶轮气孔的产生及防止

《铸造》

1997

铸造高速钢刀具的生产工艺及组织、性能的改善

《工具技术》

1997

铝复合变质处理对M2铸造高速钢的影响

《吉林大学学报(工学版)》

1997

铈、铝变质奥-贝钢中共晶体异质核心研究

《中国稀土学报》

1997

Behavior of aluminium in M2 steel

Scripta Materialia

DOI

1995

改善抗磨白口铸铁中碳化物形态的展望

《矿山机械》

1993

Mn7NbN奥氏体锰钢加工硬化的微观分析

《理化检验-物理分册》

1992

变质铸态中锰钢中SiO2作为共生共晶体非自发核心的研究

《金属学报》

1992

加Nb中锰钢晶粒细化机理的研究

《河南科技大学学报(自然科学版)》

1992

铌、氮和稀土元素对中锰钢的影响

《矿山机械》

1992

Mechanism of Work-hardening for Austenitic Manganese Steel under Non-severe Impact Loading Conditions

Journal of Materials Science & Technology

1991

含铬复合孕育剂对铸铁管性能的影响

《铸造》

1991

SILICON EFFECTS ON THE NODULIZING OF CARBIDES IN AS-CAST MEDIUM MANGANESE STEELS

Science Bulletin

1990

Ti在铸态奥氏体锰钢中的作用

《金属学报》

1990

复合变质剂在连续铸铁管中的应用

《机械工程材料》

1990

铸态耐磨锰钢碳化物的团球化

《金属学报》

1990

As-cast Medium Mn Steel with Nodular Carbide Modified by Y-base Heavy RE Compound

Journal of Materials Science & Technology

1989

Influence of Carbides and Strain-induced Martensite on Wear Resistance of Austenitic Medium Manganese Steels

Journal of Materials Science & Technology

1987

稀土、钛对奥氏体锰钢中非金属夹杂物的影响

《铸造技术》

1987

提高水泥球磨机中仓衬板抗变形能力的研究

《机械工程材料》

1983

奥氏体锰钢在非强烈冲击下使用寿命提高的研究

《钢铁》

2020

高效纳米强化合金技术及其在热作模具钢上产业化应用

《2020中国铸造活动周》

DOI

2019

微/纳米晶种对铸造合金组织构型调控和性能的影响

《2019中国铸造活动周》

2017

新型高Cr热作模具钢(HHD钢)的抗热疲劳行为

《2017中国铸造活动周论文集》

2017

铸造铝合金、铸钢、铸铁研究新进展

《2017中国铸造活动周》

2016

预变形和纳米TiC p 颗粒对铝合金高温蠕变性能的影响

《第十九届全国复合材料学术会议摘要集》

2016

原位内生微米、纳米TiC p /Al-Cu基复合材料的高温摩擦磨损行为

《第十九届全国复合材料学术会议摘要集》

2013

不含Mo、Ni高强度高碳当量灰铸铁

《2013中国铸造活动周》

2012

孕育处理对高强度灰铸铁组织与力学性能的影响

《2012中国铸造活动周论文集》

2010

灰铸铁中的石墨在切削加工过程中的变形规律及其对切削加工性能的影响

《2010年中国铸造活动周论文集》

2009

新型高性能热作模具钢

《2009中国铸造活动周》

2005

高速铁路及汽车用关键材料

《中国新材料产业发展报告（2005）》

2000

新型铸造热锻模具钢的研究

《第一届国际模具技术会议论文集》

2022

Microstructure Evolution and Work-Hardening Behavior During Compression in Cu50zr50-Xtix (1≤X≤9) Alloys

SSRN Electronic Journal

DOI

2013

Role of Si in the Wetting of α-SiC by Al

Springer eBooks

DOI