张治民

期刊论文

1. 范文龙，张宝红，杨勇彪，张治民（2026）. 室温多向锻造对铸态AZ80镁合金力学性能与组织的影响. 《锻压技术》.
2. 胡宁，张治民，任贤魏，李智勇（2026）. 直壁筋板异形Al-Mg-Zn合金线夹成形工艺优化. 《精密成形工程》.
3. 董蓓蓓，张治民，程眉，张慧芳，徐健（2026）. 材料成型及控制工程专业综合实践课程建设与探索. 《创新创业理论研究与实践》.
4. Jing-Jing Jia, Zhimin Zhang, Mu Meng, Wen-Bin He, Jun Ma, Yang Cao, Zhao-Ming Yan, Wei Liu, Peng Wei (2026). Effect of loading methods on metal flow behavior, microstructure evolution and mechanical properties of VW124A alloy empennage-shaped components. Journal of Manufacturing Processes.DOI
5. Yue Zhao, Jianmin Yu, Dongliang Lü, Xiya Jia, Fang Wang, Caiwei Cui, Jianing Han, Zhimin Zhang (2026). Effect of strain-gradient-driven heterogeneous evolution of LPSO phases on dynamic recrystallization and strengthening of a Mg-RE alloy. Journal of Rare Earths.DOI
6. Luguang Bai, Rongrong Ji, Xianwei Ren, Zhimin Zhang, Yong Xue (2026). Effects of hot deformation on the heterogeneous interfacial microstructure and shear properties of hybrid manufacturing Mg-Gd-Y-Zn-Zr alloy. Journal of Materials Research and Technology.DOI
7. 王雪丽，李付国，贾鹏来，张治民，王强（2025）. 亚稳β-Ti-1023合金不均匀变形行为及应变速率敏感性研究. 《稀有金属材料与工程》.
8. 刘靓，张治民，薛勇（2025）. 不同预热处理对热压缩Mg-Gd-Y-Zn-Zr合金动态再结晶行为的影响（英文）. Transactions of Nonferrous Metals Society of China.
9. 李金磊，张宝红，杨勇彪，张治民，陈丽娟（2025）. 自然时效耦合循环加载训练对7075铝合金力学性能的影响. 《塑性工程学报》.
10. 郭江辉，张治民，郭为民，李国俊，姚楠，任贤魏（2025）. 铝合金带法兰薄壁深锥筒件成形工艺研究. 《精密成形工程》.
11. 贺亚云，郭睿，赵熹，张治民（2025）. 通过低温和小挤压比变形制备高强韧Mg-Gd-Y-Zn-Zr合金（英文）. Transactions of Nonferrous Metals Society of China.
12. Mu Meng, Z. Zhai, Gen-Xing Lei, Zhao-Ming Yan, Weihao Wu, Qiang Wang, Zhimin Zhang (2025). Precipitation characteristics and short-time aging treatment of Mg-Gd-Y-Zn-Zr alloy. Journal of Magnesium and Alloys.DOI
13. Yayun He, Rui GUO, Xi Juan Zhao, Zhimin Zhang (2025). Preparation of high-strength and high-ductility Mg-Gd-Y-Zn-Zr alloy via deformation at low temperature and small extrusion ratio. Transactions of Nonferrous Metals Society of China.DOI
14. Ang Wu, Zhimin Zhang, Yong Jun Xue, Jian Xu (2025). Research on Material Flow Law and Control for Diffluence Upsetting-Extrusion Forming of Large-Scale Magnesium Alloy Complex Housing. Chinese Journal of Mechanical Engineering.DOI
15. Penglai Jia, Xueli Wang, Fuguo Li, Zhimin Zhang, Qiang Wang (2025). Role of Stress-Induced Martensite Transformation on Deformation Behavior and Microstructural Evolution in Metastable β Titanium Alloys during Compressive Deformation. Metals and Materials International.DOI
16. Ang Wu, Zhimin Zhang, Guojun Li, Jian Xu (2025). The causes of the high extrusion forming force in ribbed thick plates and the solutions. The International Journal of Advanced Manufacturing Technology.DOI
17. Hengpan Yuan, Xianwei Ren, Yong Jun Xue, Zhimin Zhang, Tao Ma, Ya Hui Cui (2025). Achieving T6-Strength Via Dislocation-Assisted Precipitation: Solution-Free Aging of an Al-4.6 Mg-4.6Zn-0.1Mn Crossover Alloy. Metals and Materials International.DOI
18. Ning Hu, Weizheng Liang, Zhimin Zhang, Xi Cheng Zhao, Mo Meng, Shaobin Bai, Jin Qin, Tao Ma, Xianwei Ren (2025). Effect of applied stress during aging on the precipitates and the mechanical–electrochemical properties of the Al–10Zn–3Mg–3Cu alloy. Journal of Materials Research and Technology.DOI
19. Weidong Qiao, Liang Liu, Zhimin Zhang, Yong Jun Xue (2025). Effect of pre-annealing aging treatment on the hot compression behavior and dynamic recrystallization mechanism of Mg-Gd-Y-Zn-Zr alloy. Materials Today Communications.DOI
20. Liang Liu, Zhimin Zhang, Jie Zheng, Yong Jun Xue (2025). Effect of a New Preheating Treatment Method on Microstructure and Texture Evolution of VW134A Alloy during Hot Compression Deformation. Metals and Materials International.DOI
21. Xiaoxia Han, Renyuan Lu, Yunfang Liu, Qianning Liu, Zhimin Zhang, Jianmin Yu, Linlin Li (2025). Effects of Different Temperature Paths During Reciprocating Upsetting-Extrusion on Dynamic Recrystallization Refinement of VW93A Alloy. Metals and Materials International.DOI
22. Yongbiao Yang, Bowen Hu, Xinxin Liang, Jing Chen, Luxin Gao, Jiaxing Chen, Zhimin Zhang, Qiang Wang, Xing Zhang, Xianwei Ren, Mohammed Rizwan Ali, Baohong Zhang (2025). Effects of “free flow” coupled with severe shear strain on the volume of the refined microstructure in a 7075 aluminum alloy under rotary extrusion. Journal of Materials Processing Technology.DOI
23. Jie Zheng, Zhe Chen, Zhimin Zhang, Yong Jun Xue (2025). Introducing dense second-phase particles, fine grains and abnormal texture to achieve superior elevated temperature mechanical properties of extruded GWZ942K alloy by pre-aging treatment. Materials Science and Engineering A.DOI
24. Liang Liu, Zhimin Zhang, Rong-Rong Ji, Yong Jun Xue (2025). The influence of multi-scale initial secondary phases on the microstructure and mechanical properties of extruded VW124A alloy. Journal of Alloys and Compounds.DOI
25. Xianwei Ren, Weizheng Liang, Ying Zhang, Zhimin Zhang, Qiang Wang, Xi Cheng Zhao, Shaobin Bai, Mo Meng (2025). Microstructural evolution and mechanical properties of an Al-10Zn-3Mg-2.5Cu alloy processed by stress-aging coupled artificial aging. Materials & Design.DOI
26. Liang LIU, Zhimin Zhang, Yong XUE (2025). Effect of different preheating treatments on dynamic recrystallization behavior of hot-compressed Mg−Gd−Y−Zn−Zr alloy. Transactions of Nonferrous Metals Society of China.DOI
27. Ang Wu, Zhimin Zhang, Jianmin Yu, Yong Jun Xue, Xueli Wang (2025). The analysis of fracture toughness and fracture mechanism of Mg-Gd-Y-Zn-Zr alloy under different temperatures. Journal of Alloys and Compounds.DOI
28. Yangjunfeng Nie, Beibei Dong, Zhimin Zhang, Yuhong Wang, Jianghui Guo, Nan Yao (2025). Preparation of ultra-high strength Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr alloys by varying the extrusion temperature combined with pre-deformation-ageing treatment. Materials Science and Engineering A.DOI
29. Leichen Jia, Zhimin Zhang, Yong Jun Xue, Jingxin Sun, Feilong Mao, Baohui Xu (2025). The twinning and DRX mechanisms of AZ31 Mg alloy by comparing compressive/shear/compressive-shear deformation. Journal of Alloys and Compounds.DOI
30. Ang Wu, Zhimin Zhang, Jianmin Yu, Yong Jun Xue, Xiya Jia (2025). Effect of different temperature on the fracture toughness and fracture behavior of Mg-9.46Gd-3.96Y-2.34Zn-0.42Zr alloy cylindrical component for aerospace applications. Journal of Alloys and Compounds.DOI
31. 易明，杨亚琴，张治民（2024）. 第二相体积分数对Mg-13Gd-4Y-2Zn-0.5Zr合金力学性能的影响. 《热加工工艺》.
32. 贾晶晶，张治民，于建民，薛勇，吴昂（2024）. 基于响应面法的轻质尾翼均匀挤压成形数值模拟及模具结构优化. 《兵工学报》.
33. 贺帅，张治民（2024）. Mg-9Gd-3.5Y-2Zn-0.5Zr合金材料喷丸强化工艺及摩擦磨损性能研究. 《表面技术》.
34. 张治民，贾晶晶，董蓓蓓，薛勇（2024）. 镁合金尾翼类构件径向同步加载工艺研究. 《精密成形工程》.
35. 李西宁，方敏，闫钊鸣，张治民（2024）. 镁合金表面AC-HVAF热喷涂Al基涂层中颗粒撞击行为与涂层组织演变机制. 《精密成形工程》.
36. 闫钊鸣，张治民（2024）. 加工成型工艺对制约镁产业发展的思考与观点. 《中国材料进展》.
37. 徐健，郑杰，刘莞尔，黄有旺，闫钊鸣，张治民，王强，薛勇（2024）. 不同预时效挤压态Mg-Gd-Y-Zn-Zr合金的再结晶行为和强化机制（英文）. Transactions of Nonferrous Metals Society of China.
38. Mu Meng, Xiaoyin Wang, Jinbiao Zhang, Xingxing Chen, Gen-Xing Lei, Zhao-Ming Yan, Zhimin Zhang (2024). The abnormal flow behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot tensile deformation at high temperature and low strain rate. Journal of Materials Research and Technology.DOI
39. Jie Zheng, Tao Zhou, Zhimin Zhang, Zhaoming Yan, Xianwei Ren, Yong Jun Xue (2024). Revealing the microstructure, texture evolution and mechanical properties along the whole wall of Mg-Gd-Y-Zn-Zr cylinders by tailoring rotary backward extrusion parameters. Journal of Materials Research and Technology.DOI
40. Yongbiao Yang, Jing Chen, Luxin Gao, Tingyan Zhang, Zhimin Zhang, Qiang Wang, Xing Zhang (2024). Low-cycle fatigue behaviour of extruded 7075 aluminium alloy bar: Competition of grain sizes and textures. Materials Science and Engineering A.DOI
41. Ze Liu, Jie Zheng, Zhimin Zhang, Yong Jun Xue (2024). High elongation heterostructure rare earth magnesium alloy based on rotating backward extrusion process. Journal of Materials Research and Technology.DOI
42. Zhimin Zhang, Zhe Chen, Yong Jun Xue, Xing Zhang, Qiang Wang (2024). Investigation on low hydrostatic stress extrusion technology for forming of large thin-walled components with high ribs. International Journal of Machine Tools and Manufacture.DOI
43. Yunfang Liu, Dongliang Lu, Guoqin Wu, Zhimin Zhang, Huagui Huang, Linlin Li, Yan Feng, Jianmin Yu (2024). Deformation mechanism and hardening behavior of gradient heterostructured magnesium alloys prepared by severe shear deformation. Journal of Alloys and Compounds.DOI
44. Yunfang Liu, Jianmin Yu, Guoqin Wu, Ziwei Zhang, Dongliang Lu, Zhimin Zhang, Huagui Huang, Linlin Li (2024). Grain refinement mechanism in gradient nanostructured Mg-Gd-Y-Zn-Zr alloy prepared by severe shear deformation. Materials Science and Engineering A.DOI
45. Jian XU, Jie Zheng, Wan-er LIU, You-wang HUANG, Zhaoming Yan, Zhimin Zhang, Qiang Wang, Yong XUE (2024). Recrystallization behavior and strengthening mechanism of extruded Mg−Gd−Y−Zn−Zr alloy with different pre-aged states. Transactions of Nonferrous Metals Society of China.DOI
46. Yangjunfeng Nie, Beibei Dong, Zhimin Zhang, Yuhong Wang, Nan Yao, Jianghui Guo (2024). Synergistic enhancement of strength and ductility of Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr alloy by low-temperature solid solution treatment during forging process. Journal of Alloys and Compounds.DOI
47. Yayun He, Rui Song Guo, Xi Cheng Zhao, Zhimin Zhang (2024). High strength and high ductility Mg-Gd-Y-Zn-Zr alloys obtained by controlling texture and dynamic precipitation through LPSO phase structure of different initial morphologies. Journal of Rare Earths.DOI
48. Hangyu Xu, Xi Cheng Zhao, Yayun He, Zhuo Wang, Chao Wang, Minhang Jiao, Zhimin Zhang (2024). Effect of Frequency on High-Cycle Fatigue Properties and Microstructure Evolution of Mg-9Gd-3Y-1Zn-0.8Zr Extruded Rare Earth Magnesium Alloy. Journal of Materials Engineering and Performance.DOI
49. Dongliang Lu, Guoqin Wu, Jianmin Yu, Yunfang Liu, Zhimin Zhang, Huagui Huang, Linlin Li, Yan Feng, Hengqiu Xu (2024). Effects of temperature-induced variation of the second phase on the microstructure, texture and properties of Mg-RE-Zn alloys. Materials Research Express.DOI
50. Liang Liu, Zhimin Zhang, Zhaoming Yan, Yong Jun Xue (2024). Effect of annealing treatment on the homogeneity of microstructure and mechanical properties in Mg-Gd-Y-Zn-Zr rotary backward extruded tubular. Journal of Alloys and Compounds.DOI
51. Rongrong Ji, Bin Liu, Zhimin Zhang, Yong Jun Xue (2024). Microstructure and mechanical properties of GW83 alloy prepared by rotating backward extrusion. Materials Science and Technology.DOI
52. Zhaoming Yan, Luyao Li, Jiaxuan Zhu, Luying Ren, Yong Jun Xue, Qiang Wang, Zhimin Zhang (2024). Deformation behavior of LPSO phases, grain refinement mechanism, and texture evolution of a Mg-Gd-Y-Zn-Zr alloy processed by forward extrusion combined with dual-directional angular deformation. Journal of Materials Research and Technology.DOI
53. 薛勇，刘靓，闫钊鸣，张治民，王强（2023）. 预热处理对镁合金热变形组织和性能的影响研究进展. 《中北大学学报(自然科学版)》.
54. 柴晶，程眉，张治民（2023）. 基于卷积神经网络的Mg-9Gd-Y-Zn-Zr镁合金力学性能预测. 《热加工工艺》.
55. 赵宏越，程眉，张治民，薛勇，邵帅超（2023）. 基于Laasraoui-Jonas位错密度模型的GWZK134合金动态再结晶行为研究. 《热加工工艺》.
56. 田学栋，赵熹，任贤魏，王思琪，张治民，郭拉凤（2023）. 调控LPSO层片相Mg-9Gd-4Y-2Zn-0.5Zr合金的热变形行为及热塑性提升机制. 《塑性工程学报》.
57. 李碧聪，李国俊，张治民，郭为民（2023）. 基于响应面法的大型锥筒件内凸缘缩口成形工艺参数优化. 《精密成形工程》.
58. 蒋理帅祎，王凯生，方敏，张治民（2023）. 多道次喷涂对AZ80镁合金基体组织状态的影响. 《精密成形工程》.
59. 张宇星，赵熹，田学栋，张治民（2023）. 纳米多晶铝压缩塑性力学行为分子动力学研究. 《精密成形工程》.
60. 李智勇，张治民，李国俊（2023）. 凸模结构对大截面带筋方筒件挤压力的影响研究. 《精密成形工程》.
61. Mengxian Zhang, Leichen Jia, Zhimin Zhang, Yong Jun Xue (2023). Microstructure, Texture, and Mechanical Properties of Mg-Gd-Y-Zr Alloy Prepared by Rotating Backward Extrusion Process. JOM.DOI
62. Xin Che, Qiang Wang, Xingwang Duan, Min Wang, Linfeng He, Miao Yan Cao, Shuang Liu, Guanshi Zhang, Zhimin Zhang (2023). Effect of Temperature and Revolution on the Microstructure, Texture and Microhardness of the AZ80 Alloy Cup Prepared by Rotating Backward Extrusion. Metals and Materials International.DOI
63. Jinlu Zhang, Chao Liu, Leichen Jia, Zhimin Zhang, Yong Jun Xue (2023). Effect of Annealing Parameters on Microstructure and Rare Earth Texture of Extruded Mg-Gd-Y-Zn-Zr Alloy during Alternate Aging-Annealing Process. Journal of Materials Engineering and Performance.DOI
64. Zhimin Zhang, Jianmin Yu, Yong Jun Xue, Beibei Dong, Xi Cheng Zhao, Qiang Wang (2023). Recent research and development on forming for large magnesium alloy components with high mechanical properties. Journal of Magnesium and Alloys.DOI
65. Jingjing Jia, Honglei Zhang, Mu Meng, Xue Yang, Xuhui Zhang, Zhimin Zhang (2023). Strain-induced heterogeneous bimodal microstructure behavior of Mg-Gd-Y-Zn-Zr alloy containing LPSO phase during hot compression. Journal of Materials Research and Technology.DOI
66. Xueyan Dai, Zhimin Zhang, Yong Jun Xue (2023). Effect of Multi-pass Deformation on Microstructure Evolution of Spark Plasma Sintered Ti-6Al-4V Alloy. JOM.DOI
67. Zhimin Zhang, Yong Jun Xue, Xing Zhang, Beibei Dong, Mei Cheng, Zhe Chen (2023). New Technology of Multidirectional Loading Rotary Extrusion. Chinese Journal of Mechanical Engineering.DOI
68. Jingjing Jia, Zhimin Zhang, Beibei Dong (2023). Optimization in strength-ductility of Mg-Gd-Y-Zn-Zr alloy processed by upsetting-extrusion combined with intermediate thermo-mechanical treatment (ITMT). Journal of Materials Research and Technology.DOI
69. Leichen Jia, Jie Zheng, Zhaoming Yan, Liang Liu, Xueyan Dai, Zhimin Zhang, Yong Jun Xue (2023). Effect of pre-aging on microstructure, activation energy, texture evolution of Mg–9Gd–4Y–2Zn–0.5Zr alloy during compression deformation. Journal of Materials Research and Technology.DOI
70. Rui Song Guo, Xi Cheng Zhao, Bo-Wen Hu, Xuedong Tian, Qiang Wang, Zhimin Zhang (2023). Hot Compression Behavior of Mg–Gd–Y–Zn–Zr Alloy Containing LPSO with Different Morphologies. Acta Metallurgica Sinica (English Letters).DOI
71. Zhe Chen, Jie Zheng, Zhimin Zhang, Yong Jun Xue (2023). Effects of die motion parameters on the microstructures and mechanical properties of rotary backward extruded AZ80 alloys. Journal of Materials Processing Technology.DOI
72. Liang Liu, Beibei Dong, Mei Cheng, Yong Jun Xue, Zhimin Zhang (2023). Investigation of the optimum preheating treatment parameters for extruded Mg–Gd–Y–Zn–Zr alloy using high-throughput experiments. Journal of Materials Research and Technology.DOI
73. Shuchang Li, Xi Cheng Zhao, Pengcheng Gao, XingMao Mu, Zhimin Zhang, ShuaiLing Kan, Fafa Yan (2023). The development of a W-shaped channel extrusion for fabricating magnesium alloy shells by combining high amplitude shear strain with a shorter process. Journal of Materials Research and Technology.DOI
74. Yaqin Yang, Yunfang Liu, Xintao Guo, Caihong Yin, Jianmin Yu, Zhimin Zhang, Huagui Huang (2023). The hot deformation behavior, microstructure and texture evolution of homogenized Mg–9Li–1Zn alloy. Journal of Materials Research and Technology.DOI
75. Yangjunfeng Nie, Zhimin Zhang, Mei Cheng, Zhaoming Yan, Beibei Dong (2023). Double-Glow Plasma Surface Alloying of BTi-62421S Alloys: Regulation of Microstructure Properties. Coatings.DOI
76. Yuzhen Cheng, Shuchang Li, Yayun He, Xi Cheng Zhao, Xianwei Ren, Zhimin Zhang (2023). Performance Difference Between the Spoke and Rim in an Extruded AZ80 + 0.4%Ce Magnesium Alloy Wheel under Equal Strain. Journal of Materials Engineering and Performance.DOI
77. Zhe Chen, Zhimin Zhang, Jie Zheng, Yong Jun Xue (2023). Radially loading rotary extrusion for manufacturing large-size conical cylinders with inner transverse high ribs. Chinese Journal of Aeronautics.DOI
78. Yongbiao Yang, Jinxuan Guo, Cuiying Wang, Wenxuan Jiang, Zhimin Zhang, Qiang Wang, Xing Zhang (2023). Evolution of microstructure and texture of AZ80 magnesium alloy under hot torsion with constant decreasing temperature rate. Journal of Magnesium and Alloys.DOI
79. Siqi Wang, Xi Cheng Zhao, Xianwei Ren, Zhimin Zhang, Xuedong Tian, Yayun He (2023). Hot Deformation Behavior and Processing Map Considering Strengthening Effect for Al–10.0Zn–3.0Mg–2.8Cu Alloy. Materials.DOI
80. Yuxing Zhang, Zhen Wang, Shuchang Li, Xi Cheng Zhao, Zhimin Zhang, Yaojin Wu, Xianwei Ren, Fafa Yan, Beibei Dong (2023). High Strength and Excellent Ductility of AZ80 Magnesium Alloy Cabin Component Developed by W-Shaped Channel Extrusion and Subsequent T6 Heat Treatment. Acta Metallurgica Sinica (English Letters).DOI
81. Zhaoming Yan, Haijun Liu, Xueyan Dai, Luyao Li, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2023). Effect of multi-pass cooling compression and subsequent heat treatment on microstructural and mechanical evolution of TC4 alloys. Journal of Materials Research and Technology.DOI
82. Xianwei Ren, Yuxing Zhang, Xi Juan Zhao, Zhimin Zhang, Qiang Wang, Siqi Wang, Yayun He, Hailong Liu (2023). Influence of overlap precipitate on the strength–ductility synergy of the Al–10.0Zn–3.0Mg–2.5Cu alloy with a new aging strategy. Journal of Materials Research and Technology.DOI
83. Chao Liu, Jinsheng Ji, Jie Zheng, Qiang Wang, Zhimin Zhang, Yong Jun Xue (2023). Microstructure evolution and mechanical properties of cup-shaped specimens prepared by rotary backward extrusion. Journal of Materials Research and Technology.DOI
84. Mengxian Zhang, Zixuan Wang, Zhimin Zhang, Yong Jun Xue (2023). Effect of temperature on the microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy during the large height-to-diameter ratio upsetting and extrusion. Journal of Materials Research and Technology.DOI
85. Zhen Wang, Zhimin Zhang, Jianmin Yu (2023). Novel severe plastic deformation method for extrusion compression composite processing. Materials Letters.DOI
86. Weidong Qiao, Chao Liu, Zhimin Zhang, Yong Jun Xue (2023). Effect of a Large Height-to-Diameter Ratio Upsetting–Extrusion Process on the Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloys. JOM.DOI
87. Yunfang Liu, Zhaocan Li, Yaqin Yang, Ming Yi, Jianmin Yu, Zhimin Zhang, Huagui Huang (2023). Age-Hardening Behavior and Phase Transformation of Mg-9.2Gd-1.9Y-1.8Zn-0.5Zr Alloy. JOM.DOI
88. Zhaocan Li, Guoqin Wu, Yunfang Liu, Jianmin Yu, Zhimin Zhang (2023). The effect of hydrostatic pressure on grain refinement and deformation behaviors of Mg–Gd–Y–Zn–Zr alloy under complex shear stress. Journal of Materials Research and Technology.DOI
89. Guoqin Wu, Zhaocan Li, Jianmin Yu, Yunfang Liu, Zhimin Zhang, Beibei Dong, Huagui Huang (2023). Optimization in strength-ductility of Mg-RE-Zn alloy based on different repetitive upsetting extrusion deformation paths. Materials & Design.DOI
90. Xin Che, Qiang Wang, Xingwang Duan, Min Wang, Linfeng He, Miao Yan Cao, Shuang Liu, Guanshi Zhang, Zhimin Zhang (2023). Evolution of microstructure, texture and mechanical properties of AZ80 Mg alloy tubular produced by rotating backward extrusion with modified open punch. Journal of Materials Research and Technology.DOI
91. Jinsheng Ji, Zhaoming Yan, Jie Zheng, Jishi Zhang, Qiang Wang, Zhimin Zhang, Yong Jun Xue (2023). Phase Transformation and Recrystallization of As-Cast and Homogenized Mg-9Gd-4Y-2Zn-0.5Zr Alloys during Hot Compression. Journal of Materials Engineering and Performance.DOI
92. 穆崇礼，徐健，杨亚琴，刘芸芳，赵毅慧，张治民（2022）. Mg-13Gd-4Y-2Zn-0.5Zr稀土镁合金多道次挤压微观组织演变与力学性能. 《塑性工程学报》.
93. 杨福来，王强，杨勇彪，马进，王珺，李少琪，张超，张治民（2022）. 变形温度和冷却方式对AZ80镁合金组织与力学性能的影响. 《塑性工程学报》.
94. 刘凯，张星，张治民，郭睿（2022）. T5热处理对Mg-13Gd-4Y-2Zn-0.5Zr镁合金高温硬度和组织的影响. 《热加工工艺》.
95. 王珺，车鑫，杨勇彪，张治民，耿立业，王强（2022）. 扩收挤压成形的AZ80镁合金轮毂高周疲劳性能. 《热加工工艺》.
96. 白雪智，李国俊，李碧聪，李旭斌，张治民（2022）. T6热处理对6061铝合金大型锥筒形件的力学性能及组织的影响. 《锻压技术》.
97. 宁生鹏，张宝红，李成龙，张治民（2022）. 辊轮飞边槽圆角半径对筒形件辊挤成形质量的影响. 《塑性工程学报》.
98. 郑杰，陈喆，李国俊，闫钊鸣，张治民，薛勇（2022）. 大截面带内筋方箱辊拔成形数值模拟和实验研究. 《兵器装备工程学报》.
99. 王强，于建民，薛勇，张治民（2022）. 面向剧烈塑性变形的几种挤压成形技术. 《锻压技术》.
100. 王强，薛勇，于建民，张治民（2022）. 基于挤压的剧烈塑性变形技术及发展. 《中北大学学报(自然科学版)》.
101. Xue Yang, Zhimin Zhang, Mu Meng, Jingjing Jia, Honglei Zhang, Genxing Lei, Jianmin Yu (2022). Hot tensile deformation behaviors and a fracture damage model of the Mg-Gd-Y-Zn-Zr alloy. Journal of Materials Research and Technology.DOI
102. Yi Zhang, Jin Ma, Qiang Wang, Yongbiao Yang, Mingjie Zhu, Penglai Jia, Yu-hao Duan, Zhimin Zhang (2022). Study on anisotropic behavior of 7075 Al alloy after extrusion. Materials Research Express.DOI
103. Zhaocan Li, Guoqin Wu, Jianmin Yu, Jiebing Wang, Jingjing Han, Huiyong Cui, Zhimin Zhang (2022). Influence of strain rate on grain refinement and texture evolution under complex shear stress conditions. Journal of Magnesium and Alloys.DOI
104. Jie Zheng, Liang Liu, Zhimin Zhang, Qiang Wang, Zhaoming Yan, Yong Jun Xue (2022). Multi-pass rolling-extrusion of large-scale thin-walled square tube with longitudinal inner ribs. The International Journal of Advanced Manufacturing Technology.DOI
105. Yayun He, Ming Gao, Xi Cheng Zhao, Xianwei Ren, Yaojin Wu, Yuzhen Cheng, Beibei Dong, Shaobin Bai, Zhimin Zhang, Shengchuan Wu, Shuchang Li (2022). Effect of twinning and precipitation on low-cycle fatigue damage behaviour of extruded AZ80 magnesium alloy. Materials Science and Engineering A.DOI
106. Xubin Li, Qiang Wang, Qingling Fang, Zhimin Zhang (2022). Study on Cavity Evolution of AZ80 Magnesium Alloy During Rotary Extrusion. JOM.DOI
107. Zhen Wang, Xi Cheng Zhao, Zhimin Zhang, Yaojin Wu, Kai Chen, Xianwei Ren, Dengkui Wang, Wei Wang (2022). Strengthening effect of prefabrication (10–12) tensile twinning on AZ80+0.4%Ce magnesium alloy and inhibition mechanism of discontinuous precipitation. Journal of Magnesium and Alloys.DOI
108. Beibei Dong, Jing Chai, Guoqin Wu, Huifang Zhang, Zhimin Zhang, Jianmin Yu, Yong Jun Xue, Mu Meng (2022). Dynamic recrystallization behavior and strengthening mechanism of Mg–Gd–Y–Zn–Zr alloy during isothermal MDF process. Journal of Materials Research and Technology.DOI
109. Zhaoming Yan, Jiaxuan Zhu, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2022). The microstructural, textural, and mechanical effects of high-pressure torsion processing on Mg alloys: A review. Frontiers in Materials.DOI
110. Jie Zheng, Liang Liu, Waner Liu, Youwang Huang, Zhimin Zhang, Qiang Wang, Zhaoming Yan, Yong Jun Xue (2022). Effect of heterogeneous microstructure on the mechanical properties and deformation behavior of rotating backward extruded ZK61 alloy. Journal of Alloys and Compounds.DOI
111. Zixuan Wang, Jie Zheng, Leichen Jia, Waner Liu, Youwang Huang, Zhaoming Yan, Zhimin Zhang, Yong Jun Xue (2022). Abnormal texture formation and mechanical anisotropy of pre-aging extruded Mg-Gd-Y-Zn-Zr alloy with large-scale. Journal of Materials Research and Technology.DOI
112. Lin Yuan Yan, Beibei Dong, Zhimin Zhang, Yong Jun Xue, Mei Cheng (2022). Finite Element Simulation of Punch Structure and Its Effect on Microstructure Evolution of Mg-Gd-Y-Zn-Zr Alloy via Rotary Extrusion Method. Materials.DOI
113. Chao Liu, Liang Liu, Jie Zheng, Zhaoming Yan, Zhimin Zhang, Qiang Wang, Xubin Li, Yong Jun Xue (2022). Effect of Annealing Before Aging on Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy. Journal of Materials Engineering and Performance.DOI
114. Ya Hui Cui, Wenlong Xu, Jianmin Yu, Ziwei Zhang, Zhimin Zhang, Zhimin Zhang, Zhimin Zhang, Hongyuan Hao (2022). Multi-objective optimization strategy for plastic forming parameters of variable wall thickness special-shaped plate members. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
115. Ziwei Zhang, Jianmin Yu, Zeru Wu, Hongbing Hu, Zhimin Zhang, Mo Meng, Yong Jun Xue, Xubin Li (2022). The Microstructure Evolution of Mg-RE Alloy Produced by Reciprocating Upsetting Extrusion during Hot Compression. Metals.DOI
116. Zhaocan Li, Jianmin Yu, Dongliang Lu, Guoqin Wu, Ziwei Zhang, Qilin Zhang, Zhiyi Zheng, Dan Wang, Zhimin Zhang (2022). Synergistic effects of grain refinement and texture weakening on mechanical properties anisotropy of Mg-9Gd-4Y-2Zn-0.4Zr alloy via RUE processing. Journal of Materials Research and Technology.DOI
117. Yongbiao Yang, Jinxuan Guo, Cuiying Wang, TingYan Zhang, Wenxuan Jiang, Zhimin Zhang, Qiang Wang, Guojun Li, Jun Wang (2022). The effects of deformation parameters and cooling rates on the aging behavior of AZ80+0.4%Ce. Journal of Magnesium and Alloys.DOI
118. Jin Ma, Qiang Wang, Tingyan Zhang, Hui Cao, Yongbiao Yang, Zhimin Zhang (2022). Effect of natural aging time on tensile and fatigue anisotropy of extruded 7075 Al alloy. Journal of Materials Research and Technology.DOI
119. Yong Xue, Zixuan Wang, Leichen Jia, Jie Zheng, Zhimin Zhang, Jianmin Yu, Xi Zhao (2022). EFFECT OF COOLING RATE ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SOLUTION-TREATED Mg-9Gd-4Y-2Zn-0.5Zr ALLOY. Materiali in tehnologije.DOI
120. Yali Duan, Jianmin Yu, Baohong Zhang, Beibei Dong, Zhimin Zhang, Guoqin Wu, Zeng Wei, Xubin Li, Mu Meng (2022). Deformation behavior and microstructure of Mg-13Gd-4Y-2Zn-0.5Zr alloy during the rotating forward extrusion process. Materials Letters.DOI
121. Rui Han, Jie Zheng, Zhaoming Yan, Leichen Jia, Jingjing Jia, Liang Liu, Zhimin Zhang, Yong Jun Xue (2022). Effect of Deformation Parameters on Recrystallization Behavior and Long-Period Stacking-Ordered Phase of Mg-9Gd-4Y-2Zn-0.5Zr Alloy. Materials.DOI
122. Yangjunfeng Nie, Jie Zheng, Rui Han, Leichen Jia, Zhimin Zhang, Yong Jun Xue (2022). Hot Deformation Behaviour and Constitutive Equation of Mg-9Gd-4Y-2Zn-0.5Zr Alloy. Materials.DOI
123. Hui Cao, Yongbiao Yang, Xing Zhang, Jin Ma, Tingyan Zhang, Zhimin Zhang (2022). Microstructure Evolution of 7075 Aluminum Alloy by Rotary. Materials.DOI
124. Yaojin Wu, Yingze Meng, Huisheng Yu, Yayun He, Jianmin Yu, Zhen Wang, Zhimin Zhang (2022). Effect of shear stress and compressive stress deformation on LPSO phase kink behavior of Mg-Gd-Y-Zn-Zr alloy. Materials Research Express.DOI
125. Guoqin Wu, Zhaocan Li, Jianmin Yu, Hongbing Hu, Yali Duan, Beibei Dong, Zhimin Zhang (2022). Texture evolution and effect on mechanical properties of repetitive upsetting-extruded and heat treatment Mg-Gd-Y-Zn-Zr alloy containing LPSO phases. Journal of Alloys and Compounds.DOI
126. Beibei Dong, Zhimin Zhang, Jianmin Yu, Mu Meng, Yong Jun Xue, Huifang Zhang, Xi Cheng Zhao, Xianwei Ren, Shaobin Bai (2022). Microstructure evolution and mechanical properties of industrial scale samples of Mg–Gd–Y–Zn–Zr alloy after repetitive upsetting-extrusion process. Journal of Materials Research and Technology.DOI
127. Zhikang Peng, Leichen Jia, Guanshi Zhang, Zhimin Zhang, Qiang Wang, Jianmin Yu, Jian Zhi Xu, Yong Jun Xue (2022). EFFECT OF UPSETTING-EXTRUSION-UPSETTING ON THE RECRYSTALLIZATION OF AN Mg-9Gd-4Y-2Zn-0.5Zr ALLOY. Materiali in tehnologije.DOI
128. Zeru Wu, Jianmin Yu, Ziwei Zhang, Hongbing Hu, Zhimin Zhang (2022). Static Recrystallization Behavior of Mg–Gd–Y–Zn–Zr Alloy During Annealing Treatment. JOM.DOI
129. Rui Song Guo, Qiang Wang, Yingze Meng, Wenlong Xu, Guojun Li, Zhimin Zhang, Huisheng Yu, Jianmin Yu (2022). Compressive stress and shear stress on the deformation mechanism of Mg-13Gd-4Y–2Zn-0.5Zr alloy at different deformation temperatures. Journal of Materials Research and Technology.DOI
130. Lin Yuan Yan, Zhimin Zhang, Yong Jun Xue, Jian Xu, Beibei Dong, Xubin Li (2022). Effect of rotating shear extrusion on the microstructure, texture evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy. Journal of Alloys and Compounds.DOI
131. Yali Duan, Jianmin Yu, Beibei Dong, Huifang Zhang, Mu Meng, Mei Cheng, Zhimin Zhang, Baohong Zhang, Hongyuan Hao, Ping Xu, Huiling Liu (2022). Microstructure Evolution and Dynamic Recrystallization Behavior of Mg-Gd-Y-Zn-Zr Alloy during Rotating Backward Extrusion. Materials.DOI
132. 薛勇，郑杰，闫钊鸣，徐健，张治民，李旭斌，杨勇彪，王强（2021）. 差速循环扩挤制备的AZ31镁合金的组织和力学性能（英文）. 《稀有金属材料与工程》.
133. 李国俊，白雪智，李碧聪，高畅，薛勇，张治民，赵毅慧（2021）. 大型6061铝合金锥筒形件成形及组织与性能研究. 《锻压技术》.DOI
134. 张思杨，于建民，张治民，徐文龙，贾蕾琛，吴国琴，王洪海（2021）. 等温往复镦粗-挤压对Mg-Re-Zn合金微观组织和室温力学性能的影响. 《锻压技术》.DOI
135. 苗站，张治民，于建民，徐文龙，田永刚（2021）. 不同参数对铝合金枝杈类构件金属流线的影响及优化. 《锻压技术》.DOI
136. 刘正然，赵熹，刘杰，张治民（2021）. 等温循环镦粗挤压工艺对ZK60镁合金微观组织及力学性能的影响. 《塑性工程学报》.
137. 高植，孟模，张治民，杨志远，史铮，贾晶晶（2021）. 固溶参数对Mg-13Gd-4Y-2Zn-0.6Zr合金组织及性能的影响. 《稀有金属》.DOI
138. 高帅，张宝红，霍文娟，张治民，高畅（2021）. 摩擦因数及坯料壁厚对筒体件辊挤成形质量的影响. 《锻压技术》.DOI
139. 宋晓茜，王强，赵淑珍，张旭峰，张治民（2021）. 基于上限理论的开口凸模旋转挤压力分析. 《锻压技术》.DOI
140. 郭睿，李国俊，张治民，赵熹，刘凯（2021）. 变温往复镦挤对Mg-9Gd-4Y-2Zn-0.5Zr合金组织和硬度的影响. 《塑性工程学报》.
141. 田永刚，于建民，张治民，吴国琴，苗站，贾蕾琛（2021）. 旋转反挤压稀土镁合金动态再结晶和织构演化. 《塑性工程学报》.
142. 于惠升，张治民，于建民，孟瑛泽（2021）. 往复镦粗-挤压对Mg-Gd-Y-Zr合金变形均匀性及织构的影响. 《热加工工艺》.
143. 张旭峰，王强，张治民，车鑫，宋晓茜（2021）. 变形参数对旋转反挤压大塑性变形金属流动的影响. 《热加工工艺》.DOI
144. 王翠英，杨勇彪，张治民，王珍（2021）. 热扭转变形温度对AZ80镁合金微观组织的影响. 《热加工工艺》.DOI
145. 高畅，李国俊，张治民，高帅（2021）. 曲线回转体构件的成形工艺. 《锻压技术》.DOI
146. 高明，赵熹，刘杰，张博循，张治民（2021）. 新型高强韧Al-Zn-Mg-Cu合金热变形本构方程及热加工图研究. 《塑性工程学报》.
147. Zhaoming Yan, Jiaxuan Zhu, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2021). HOT DEFORMATION BEHAVIOR AND PROCESSING MAP OF A Mg-Gd-Y-Zn-Zr ALLOY. Materiali in tehnologije.DOI
148. Jingjing Jia, Mu Meng, Zhimin Zhang, Xue Yang, Genxing Lei, Honglei Zhang (2021). Effect of deep cryogenic treatment on the microstructure and tensile property of Mg-9Gd-4Y–2Zn-0.5Zr alloy. Journal of Materials Research and Technology.DOI
149. Jie Zheng, Zhe Chen, Zhaoming Yan, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2021). Preparation of ultra-high strength Mg-Gd-Y-Zn-Zr alloy by pre-ageing treatment prior to extrusion. Journal of Alloys and Compounds.DOI
150. Yunfang Liu, Yaqin Yang, Ming Yi, Jianmin Yu, Baocheng Li, Zhimin Zhang (2021). The Formation of 14H-LPSO in Mg–9Gd–2Y–2Zn–0.5Zr Alloy during Heat Treatment. Materials.DOI
151. Jin Ma, Qiang Wang, Yongbiao Yang, Fulai Yang, Beibei Dong, Xin Che, Hui Cao, Tingyan Zhang, Zhimin Zhang (2021). Anisotropic Low Cycle Behavior of the Extruded 7075 Al Alloy. Materials.DOI
152. Jie Zheng, Zhaoming Yan, Jinsheng Ji, Yusha Shi, Heng Zhang, Zhimin Zhang, Yong Jun Xue (2021). Effect of heat treatment on mechanical properties and microstructure evolution of Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy. Journal of Magnesium and Alloys.DOI
153. Heng Zhang, Jie Zheng, Yusha Shi, Jinsheng Ji, Jishi Zhang, Zhimin Zhang, Yong Jun Xue (2021). Microstructure and mechanical properties of pure magnesium prepared by CEE-AEC at different temperatures. Materials Research Express.DOI
154. Ya Hui Cui, Yusha Shi, Jie Zheng, Zhaoming Yan, Jishi Zhang, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2021). Influence of heat treatment on the tensile properties and fatigue properties of Mg-8.8Gd-3.5Y-1.5Zn-0.5Zr alloy. Materials Research Express.DOI
155. Yongbiao Yang, TingYan Zhang, Jinxuan Guo, Zhimin Zhang, Qiang Wang, Guojun Li (2021). Energy absorption within elastic range for AZ31 magnesium alloy. Materials Research Express.DOI
156. Jie Zheng, Zhe Chen, Zhaoming Yan, Zhimin Zhang, Yong Jun Xue (2021). An alternating ageing-annealing process for enhancing strength and ductility of a Mg-Gd-Y-Zn-Zr alloy. Materials Science and Engineering A.DOI
157. Yong Jun Xue, Jishi Zhang, Haijun Liu, Zhaoming Yan, Hongyue Zhao, Jian Xu, Yaqing Yang, Qiang Wang, Zhimin Zhang (2021). Multi-pass Hot Deformation Behavior and Microstructure Evolution of Spark Plasma-Sintered Ti-6Al-4V Alloy. Journal of Materials Engineering and Performance.DOI
158. Haijun Liu, Zhimin Zhang, Kaihua Xu, Jishi Zhang, Yong Jun Xue, Qiang Wang (2021). Evolution of the α phase and microhardness for hot isostatic pressed Ti-6Al-4V alloy during multi-pass deformation. Materials Characterization.DOI
159. Jinsheng Ji, Jie Zheng, Yusha Shi, Heng Zhang, Zhimin Zhang, Yong Jun Xue (2021). Reinforcing effects of cyclic expansion extrusion with an asymmetrical extrusion cavity (CEE-AEC) on pure magnesium. Materials Research Express.DOI
160. Wenlong Xu, Jianmin Yu, Beibei Dong, Qiang Wang, Xubin Li, Mu Meng, Ping Xu, Zhimin Zhang (2021). Deformation temperature impact on microstructure and mechanical properties uniformity of GWZ932K alloy under reciprocating upsetting-extrusion. Journal of Materials Research and Technology.DOI
161. Rui Han, Leichen Jia, Zhimin Zhang, Qiang Wang, Jianmin Yu, Jian Xu, Yong Jun Xue (2021). Effect of annealing temperature and time on recrystallization behavior of Mg-Gd-Y-Zn-Zr alloy. Materials Research Express.DOI
162. Zhengran Liu, Xi Cheng Zhao, Kai Chen, Siqi Wang, Xianwei Ren, Zhimin Zhang, Yong Jun Xue (2021). Microstructural Evolution and Anisotropic Weakening Mechanism of ZK60 Magnesium Alloy Processed by Isothermal Repetitive Upsetting Extrusion. Acta Metallurgica Sinica (English Letters).DOI
163. Haijun Liu, Zhimin Zhang, Kaihua Xu, Jishi Zhang, Yong Jun Xue, Qiang Wang (2021). HOT-DEFORMATION BEHAVIOR OF HOT ISOSTATIC PRESSED Ti-6Al-4V ALLOY DURING HOT COMPRESSION. Materiali in tehnologije.DOI
164. Xi Cheng Zhao, Shuchang Li, Yangsheng Zheng, Zhengran Liu, Kai Chen, Jianmin Yu, Zhimin Zhang, Shun-qi ZHENG (2021). The microstructure evolution, texture weakening mechanism and mechanical properties of AZ80 Mg alloy processed by repetitive upsetting-extrusion with reduced deformation temperature. Journal of Alloys and Compounds.DOI
165. Wenlong Xu, Jianmin Yu, Leichen Jia, Guoqin Wu, Zhimin Zhang (2021). Deformation behavior of Mg-13Gd-4Y-2Zn-0.5Zr alloy on the basis of LPSO kinking, dynamic recrystallization and twinning during compression-torsion. Materials Characterization.DOI
166. Wenlong Xu, Jianmin Yu, Leichen Jia, Chang Gao, Zhan Miao, Guoqin Wu, Guojun Li, Zhimin Zhang (2021). Grain refinement impact on the mechanical properties and wear behavior of Mg-9Gd-3Y-2Zn-0.5Zr alloy after decreasing temperature reciprocating upsetting-extrusion. Journal of Magnesium and Alloys.DOI
167. Lin Yan, Zhimin Zhang, Guojun Li, Yong Jun Xue, Jian Xu (2021). Evolution of the microstructure, texture and mechanical properties of ZK60 alloy during processing by rotating shear extrusion. Journal of Alloys and Compounds.DOI
168. Leichen Jia, Jianmin Yu, Wenlong Xu, Guoqin Wu, Qing Xia, Zhimin Zhang (2021). The microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr system and Mg-Gd-Y-Zr system alloys by RUE deformation. Materials Research Express.DOI
169. Yusha Shi, Jie Zheng, Jinsheng Ji, Heng Zhang, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2021). The improvement of grain refinement, texture modification and mechanical properties of pure Mg prepared by cyclic expansion extrusion with an asymmetric extrusion cavity. Materials Research Express.DOI
170. Jishi Zhang, Haijun Liu, Kaihua Xu, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2021). Effect of multi-pass deformation on microstructure and flow behavior of Ti-6Al-4V alloy fabricated through hot isostatic pressing. Materials Research Express.DOI
171. 朱家萱，闫钊鸣，张治民，张冠世，潘玉田，张龙（2020）. 热处理对GWZK94合金微观组织与力学性能的影响（英文）. 《稀有金属材料与工程》.
172. 王强，孟模，房庆龄，张治民（2020）. 复合挤压在铝合金轮毂成形中的应用研究. 《塑性工程学报》.
173. 张治民，刘海军，任璐英，闫江鹏，王强，薛勇（2020）. 热处理对热等静压态TC4合金及其降温多道次变形微观组织的影响. 《稀有金属材料与工程》.
174. 吴星辰，程眉，张治民（2020）. 热处理工艺对Mg-11Gd-3.6Y-2Zn-0.6Zr合金组织和力学性能的影响. 《中国有色金属学报》.
175. 史铮，孟模，杨雪，张治民，高植（2020）. 固溶处理冷却介质温度对Mg-13Gd-4Y-2Zn-0.5Zr合金时效组织及硬度的影响. 《金属热处理》.DOI
176. 寇鑫，于建民，刘海军，崔婧玉，张治民，卢知渊，罗妮娜，王红海（2020）. Mg-13Gd-4Y-2Zn-0.5Zr合金形变软化行为及本构方程建立. 《锻压技术》.DOI
177. 张晋禄，张治民（2020）. GW92镁合金均匀化工艺研究. 《热加工工艺》.DOI
178. 胡缤，张宝红，魏椿雨，张治民（2020）. 模具预热温度及冲头工作速度对辊式成形筒体质量的影响. 《塑性工程学报》.
179. 王鑫，王强，张治民，郭世超，宋晓茜，张旭峰（2020）. 薄壁筒形件累积镦挤成形法兰研究. 《轻合金加工技术》.DOI
180. 门雪垠，方敏，张治民（2020）. HVAF制备形变镁合金Al-WC/Al复合涂层的微观组织研究. 《热加工工艺》.DOI
181. 胡缤，张宝红，魏椿雨，张治民（2020）. 辊轮飞边槽开口角度对辊式成形筒体质量的影响. 《塑性工程学报》.
182. 王勇，方敏，张治民（2020）. HVAF制备27SiMn钢WC涂层沉积机理研究. 《热加工工艺》.DOI
183. 吴星辰，程眉，张治民（2020）. 挤压态稀土镁合金高温单轴拉伸行为特征研究. 《中北大学学报(自然科学版)》.
184. Jianghui Wang, Zhimin Zhang (2020). Thermal deformation strengthening of WC-10Co4Cr coating prepared by high velocity air-fule process. Materials Research Express.DOI
185. Yingze Meng, Jianmin Yu, Kai Liu, Huisheng Yu, Fan Zhang, Yaojin Wu, Zhimin Zhang, Nina Luo, Honghai Wang (2020). The evolution of long-period stacking ordered phase and its effect on dynamic recrystallization in Mg-Gd-Y-Zn-Zr alloy processed by repetitive upsetting-extrusion. Journal of Alloys and Compounds.DOI
186. Jianmin Yu, Zhimin Zhang, Ping Xu, Yingze Meng, Mo Meng, Beibei Dong, Huiling Liu (2020). Deformation behavior and microstructure evolution of rare earth magnesium alloy during rotary extrusion. Materials Letters.DOI
187. Jiangpeng Yan, Yong Jun Xue, Zhimin Zhang, Yaojin Wu, Xi Cheng Zhao (2020). Effect of multi-pass deformation on microstructure evolution of spark plasma sintered TC4 titanium alloy. High Temperature Materials and Processes.DOI
188. Jiangpeng Yan, Zhimin Zhang, Jian Zhi Xu, Yaojin Wu, Xi Cheng Zhao, Yong Jun Xue, Haijun Liu (2020). Microstructure evolution of TC4 powder by spark plasma sintering after hot deformation. High Temperature Materials and Processes.DOI
189. Xubin Li, Henry S. -W. Hu, Zhimin Zhang, Yongbiao Yang, Qiang Wang (2020). Precise Forming of Complex Magnesium Alloy Components Based on Finite Element Method and Quantitative Preforming Design. Journal of Materials Engineering and Performance.DOI
190. Beibei Dong, Zhimin Zhang, Xin Che, Jianmin Yu, Mu Meng, Jinlu Zhang (2020). Microstructure, Texture Evolution, and Mechanical Properties of MDFed GWZ Alloy Containing LPSO Phases on the Condition of High and Low Temperature Cycle Deformation. Metals.DOI
191. Kaihua Xu, Yong Jun Xue, Zhimin Zhang, Qiang Wang, Jiangpeng Yan, Haijun Liu, Jishi Zhang (2020). The effect of heat treatment on α/ β phases evolution of TC4 titanium alloy fabricated by spark plasma sintering. Procedia Manufacturing.DOI
192. Zhaoming Yan, Xubin Li, Jie Zheng, Zhimin Zhang, Qiang Wang, Kaihua Xu, Hongzhi Fan, Guanshi Zhang, Jiaxuan Zhu, Yong Jun Xue (2020). Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route. Journal of Magnesium and Alloys.DOI
193. Xi Cheng Zhao, Pengcheng Gao, Gang Chen, Jianfeng Wei, Zhuang Zhu, Fafa Yan, Zhimin Zhang, Qiang Wang (2020). Effects of aging treatments on low-cycle fatigue behavior of extruded AZ80 for automobile wheel disks. Materials Science and Engineering A.DOI
194. Beibei Dong, Xin Che, Zhimin Zhang, Jianmin Yu, Mu Meng (2020). Microstructure evolution and microhardness of Mg-13Gd-4Y–2Zn-0.5Zr alloy via pre-solution and multi-directional forging (MDF) process. Journal of Alloys and Compounds.DOI
195. Jie Zheng, Zhaoming Yan, Qiang Wang, Zhimin Zhang, Yong Jun Xue (2020). Microstructure and Texture Evolution of AZ31 Alloy Prepared by Cyclic Expansion Extrusion with Asymmetrical Extrusion Cavity at Different Temperatures. Materials.DOI
196. Zhaoming Yan, Jie Zheng, Jiaxuan Zhu, Zhimin Zhang, Qiang Wang, Yong Jun Xue (2020). High Ductility with a Homogeneous Microstructure of a Mg–Al–Zn Alloy Prepared by Cyclic Expansion Extrusion with an Asymmetrical Extrusion Cavity. Metals.DOI
197. Baohong Zhang, Bin Hu, Zhimin Zhang, Xi Cheng Zhao (2020). Study on the forward slip of cup with variable wall thickness during roll forming. Journal of Physics Conference Series.DOI
198. Yongbiao Yang, Qingfeng Qin, Zhimin Zhang, Qiang Wang, Mu Meng, Minjie Liang, Henry S. -W. Hu (2020). Processing maps of extruded AZ80 + 0.4% Ce magnesium alloy. Journal of Alloys and Compounds.DOI
199. Zhaoming Yan, Zhimin Zhang, Xubin Li, Jian Xu, Qiang Wang, Guanshi Zhang, Jie Zheng, Hongzhi Fan, Kaihua Xu, Jiaxuan Zhu, Yong Jun Xue (2020). A novel severe plastic deformation method and its effect on microstructure, texture and mechanical properties of Mg-Gd-Y-Zn-Zr alloy. Journal of Alloys and Compounds.DOI
200. Jianya Yi, Zhijun Wang, Jianping Yin, Zhimin Zhang (2020). Reaction characteristics of polymer expansive jet impact on explosive reactive armour. e-Polymers.DOI
201. Yingze Meng, Jianmin Yu, Huisheng Yu, Yaojin Wu, Zhimin Zhang (2020). Effect of variable temperature repetitive upsetting-extrusion on microstructure and texture of Mg-Gd-Y-Zr alloy. Procedia Manufacturing.DOI
202. Huisheng Yu, Jianmin Yu, Yingze Meng, Zhimin Zhang (2020). Effect of repetitive upsetting-extrusion on deformation uniformity and mechanical properties of Mg–Gd–Y–Zr alloy. Materials Research Express.DOI
203. Guoqin Wu, Jianmin Yu, Leichen Jia, Wenlong Xu, Beibei Dong, Zhimin Zhang, Biying Hao (2020). Microstructure and Texture Evolution of Mg-Gd-Y-Zr Alloy during Reciprocating Upsetting-Extrusion. Materials.DOI
204. Baohong Zhang, Bin Hu, Zhimin Zhang, Xi Cheng Zhao (2020). Influence of Process Parameters on the Forward Slip of Cup during Roll Forming. Journal of Physics Conference Series.DOI
205. Jun Wang, Fulai Yang, Jin Ma, TingYan Zhang, Hui Cao, Xin Che, Liye Geng, Zhimin Zhang, Qiang Wang, Yongbiao Yang (2020). Effects of ageing on low-cycle fatigue (LCF) properties of AZ80 magnesium alloy wheel hub. Materials Research Express.DOI
206. Yingze Meng, Jianmin Yu, Guanshi Zhang, Yaojin Wu, Zhimin Zhang, Zheng Shi (2020). Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5Zr alloy during rotary backward extrusion. Journal of Magnesium and Alloys.DOI
207. Wenlong Xu, Jianmin Yu, Guoqin Wu, Leichen Jia, Zhi Yuan Gao, Zhan Miao, Zhimin Zhang, Feng Yan (2020). Effect of Decreasing Temperature Reciprocating Upsetting-Extrusion on Microstructure and Mechanical Properties of Mg-Gd-Y-Zr Alloy. Metals.DOI
208. Xi Cheng Zhao, Shuchang Li, Zhimin Zhang, Pengcheng Gao, ShuaiLing Kan, Fafa Yan (2020). Comparisons of microstructure homogeneity, texture and mechanical properties of AZ80 magnesium alloy fabricated by annular channel angular extrusion and backward extrusion. Journal of Magnesium and Alloys.DOI
209. 闫江鹏，薛勇，张治民，徐健，李旭斌，吴耀金（2019）. 放电等离子烧结TC4钛合金热塑性变形行为与热加工图研究. 《塑性工程学报》.
210. 王江慧，张治民（2019）. 固溶温度对Ni-Cr基高温合金组织与力学性能的影响. 《热加工工艺》.DOI
211. 屈晓晓，张治民，李国俊，于建民（2019）. 基于Archard模型的铝合金盒形件热挤压模具磨损研究. 《热加工工艺》.DOI
212. 张治民，任璐英，薛勇，吴耀金，王强，徐健，张慧芳（2019）. 热等静压Ti-6Al-4V钛合金热变形微观组织演变. 《稀有金属材料与工程》.
213. 闫钊鸣，张治民，杜玥，张冠世，任璐英（2019）. 均匀化处理对Mg-13Gd-3.5Y-2Zn-0.5Zr镁合金组织和力学性能的影响. 《材料工程》.
214. 高鹏程，赵熹，郭拉凤，张治民（2019）. 基于应变分布均匀性的镁合金内环筋壳体旋转挤压成形工艺优化. 《兵器材料科学与工程》.DOI
215. 李旭斌，吴昂，张治民，张宝红，贾泽伟（2019）. 高强铝合金异形复杂构件预成形优化设计. 《锻压技术》.DOI
216. 于建民，程少博，张治民，程眉，杨亚琴，卢知渊（2019）. GW83镁合金热处理工艺研究. 《热加工工艺》.DOI
217. 郑晓冬，杨勇彪，翟福娜，张治民（2019）. 扭转热变形对7A04铝合金织构的影响. 《兵器材料科学与工程》.
218. 吴昂，吴莹，李国俊，李旭斌，张治民（2019）. 基于响应曲面法的大型锥形件缩口成形工艺设计及多几何参数优化. 《机械工程学报》.
219. 刘海军，张治民，徐健，吴耀金，李旭斌，薛勇（2019）. 等离子烧结态TC4钛合金热变形行为及本构模型研究. 《塑性工程学报》.
220. 闫发发，赵熹，吴耀金，张治民（2019）. 热处理对挤压AZ80镁合金杯形件组织和性能的影响. 《兵器材料科学与工程》.DOI
221. 王江慧，张治民（2019）. 7A09超高强度铝合金超音速火焰喷涂WC涂层. 《金属热处理》.DOI
222. 任耀，王强，张治民，郭鹏杰，王鑫，郭世超（2019）. 不同镦粗温度对AZ80镁合金空洞闭合演化规律的影响研究. 《热加工工艺》.DOI
223. 房庆龄，王强，张治民，屈晓晓，张义（2019）. AZ80镁合金开口凸模旋转挤压过程中的空洞演化研究. 《塑性工程学报》.
224. 闫林，徐健，张治民，闫凡（2019）. 薄壁双杯形件的成形工艺. 《热加工工艺》.DOI
225. 程少博，于建民，张治民，王梦洁，刘涛（2019）. 响应面法优化镁合金杯形件旋转挤压参数的研究. 《热加工工艺》.DOI
226. 白冰，张治民，王江慧（2019）. 步进距离对HVAF喷涂WC-10Co-4Cr涂层孔隙率和显微硬度的影响. 《热加工工艺》.DOI
227. Guanshi Zhang, Yingze Meng, Fafa Yan, Zhi Yuan Gao, Zhaoming Yan, Zhimin Zhang (2019). Microstructure and texture evolution of Mg-RE-Zn alloy prepared by repetitive upsetting-extrusion under different decreasing temperature degrees. Journal of Alloys and Compounds.DOI
228. Ping Xu, Jianmin Yu, Zhimin Zhang (2019). Microstructure and Texture Evolution of Mg–Gd–Y–Zn–Zr Alloy by Compression–Torsion Deformation. Materials.DOI
229. Guanshi Zhang, Zhimin Zhang, Yingze Meng, Zhaoming Yan, Xin Che, Xubin Li (2019). Effects of Repetitive Upsetting Extrusion on the Microstructure and Texture of GWZK124 Alloy under Different Starting Temperatures. Materials.DOI
230. Xi Cheng Zhao, Shuchang Li, Yong Jun Xue, Zhimin Zhang (2019). An Investigation on Microstructure, Texture and Mechanical Properties of AZ80 Mg Alloy Processed by Annular Channel Angular Extrusion. Materials.DOI
231. Guanshi Zhang, Zhimin Zhang, Zhimin Zhang, Xubin Li, Zhaoming Yan, Xin Che, Jianmin Yu, Yingze Meng (2019). Effects of repetitive upsetting-extrusion parameters on microstructure and texture evolution of Mg–Gd–Y–Zn–Zr alloy. Journal of Alloys and Compounds.DOI
232. Yong Jun Xue, Shuaishuai Chen, Zhimin Zhang, Qiang Wang, Jiangpeng Yan (2019). Hot workability and microstructure evolution of Al–0.2Sc–0.04Zr alloy. Journal of Materials Science.DOI
233. Xi Cheng Zhao, Shuchang Li, Fafa Yan, Zhimin Zhang, Yaojin Wu (2019). Microstructure Evolution and Mechanical Properties of AZ80 Mg Alloy during Annular Channel Angular Extrusion Process and Heat Treatment. Materials.DOI
234. Pengcheng Gao, Xi Cheng Zhao, Fafa Yan, Shuchang Li, Zhimin Zhang (2019). Effects of annular channel angular extrusion process and heat treatment on microstructure and mechanical properties of 2A12 aluminum alloy cabin. Materials Research Express.DOI
235. Jie Zheng, Zhaoming Yan, Jianmin Yu, Zhimin Zhang, Hongzhi Fan, Kaihua Xu, Yong Jun Xue (2019). Microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy by cyclic expansion-extrusion with an asymmetrical extrusion cavity (CEE-AEC). Materials Research Express.DOI
236. Jianmin Yu, Zhimin Zhang, Pingguang Xu, Beibei Dong, Qiang Wang, Mu Meng, Hongyuan Hao, Xubin Li, Xueyan Yin (2019). Dynamic recrystallization behavior of Gd-containing Mg alloy under torsion deformation. Journal of Alloys and Compounds.DOI
237. Xi Cheng Zhao, Pengcheng Gao, Zhimin Zhang, Qiang Wang, Fafa Yan (2019). Fatigue characteristics of the extruded AZ80 automotive wheel. International Journal of Fatigue.DOI
238. Zhaoming Yan, Min Fang, Zhen Dong Lian, Zhimin Zhang, Jiaxuan Zhu, Guanshi Zhang, Yiding Wang (2019). Research on AZ80 + 0.4%Ce (wt %) Ultra-Thin-Walled Tubes of Magnesium Alloys: The Forming Process, Microstructure Evolution and Mechanical Properties. Metals.DOI
239. Jianya Yi, Zhijun Wang, Jianping Yin, Zhimin Zhang (2019). Simulation Study on Expansive Jet Formation Characteristics of Polymer Liner. Materials.DOI
240. Yong Jun Xue, Shuaishuai Chen, Haijun Liu, Zhimin Zhang, Luying Ren, Bing Zhe Bai (2019). Effect of Cyclic Expansion-Extrusion Process on Microstructure, Deformation and Dynamic Recrystallization Mechanisms, and Texture Evolution of AZ80 Magnesium Alloy. Advances in Materials Science and Engineering.DOI
241. 杨博文，薛勇，张治民，王强，刘震（2018）. 热等静压态TC4钛合金高温变形行为研究. 《热加工工艺》.
242. 于建民，张治民，王强（2018）. 高强铝合金轮辋失效分析. 《机械强度》.
243. 杜玥，张治民，张冠世，闫钊鸣，于建民（2018）. 降温往复镦粗-挤压变形对Mg-Gd-Y-Zn-Zr合金晶粒细化及织构变化的研究（英文）. 《稀有金属材料与工程》.
244. 董海涛，张治民，杨占尧（2018）. 锻造工艺对铝合金轴承盖性能的影响. 《热加工工艺》.
245. 耿立业，王强，杨勇彪，张治民，梁敏洁，任耀（2018）. 基于空心坯料挤压AZ80镁合金轮毂组织与性能研究. 《兵器材料科学与工程》.
246. 陈帅帅，薛勇，张治民，苏暄博，王强，徐苗苗（2018）. Al-0.2Sc-0.04Zr超耐热变形铝合金高温流变行为. 《兵器材料科学与工程》.
247. 陈亚京，杨勇彪，张治民，王强（2018）. 7A04铝合金扭转热变形行为研究. 《塑性工程学报》.
248. 贺晨晨，李国俊，张治民，冯岩（2018）. 2A12铝合金带筋薄壁梯形环件挤压成形研究. 《热加工工艺》.
249. Zhimin Zhang, Zhaoming Yan, Yue Du, Guanshi Zhang, Jiaxuan Zhu, Luying Ren, Yiding Wang (2018). Hot Deformation Behavior of Homogenized Mg-13.5Gd-3.2Y-2.3Zn-0.5Zr Alloy via Hot Compression Tests. Materials.DOI
250. Guanshi Zhang, Zhimin Zhang, Yue Du, Zhaoming Yan, Xin Che (2018). Effect of Isothermal Repetitive Upsetting Extrusion on the Microstructure of Mg-12.0Gd-4.5Y-2.0Zn-0.4Zr Alloy. Materials.DOI
251. Zhimin Zhang, Yue Du, Guanshi Zhang, Zhaoming Yan, Jianmin Yu, Mu Meng (2018). Microstructure and Mechanical Properties of Mg–Gd–Y–Zn–Zr Alloy Prepared by Repetitive Upsetting and Extrusion. MATERIALS TRANSACTIONS.DOI
252. Mu Meng, Xin Che, Zhimin Zhang, Beibei Dong, Zheng Shi (2018). Study on the hot tensile behavior, microstructure and fracture of Mg-13Gd-4Y-2Zn-0.5Zr alloy. Materials Research Express.DOI
253. Qiang Wang, Zhimin Zhang, Xubin Li, Huifang Zhang (2018). Development of a novel high straining backward extrusion process. MATEC Web of Conferences.DOI
254. 薛勇，吴耀金，杨治辉，张治民，齐红娜（2017）. 循环扩挤工艺挤压AZ80镁合金的微观组织与力学性能. 《塑性工程学报》.
255. 杨治辉，吴耀金，薛勇，张治民（2017）. 循环扩挤平面变形对7A04铝合金组织与性能的影响. 《塑性工程学报》.
256. 薛勇，杨治辉，张治民，吴耀金，李宏（2017）. 循环扩-挤变形AZ80镁合金组织与性能. 《稀有金属材料与工程》.
257. 郭睿琳，张星，李保成，张治民，赵晓飞（2017）. 挤压成形7A04铝合金轮辋疲劳性能研究. 《兵器材料科学与工程》.
258. 赵晓飞，张星，李保成，张治民，郭睿琳（2017）. 挤压变形对Mg-Gd-Y-Zn-Zr稀土镁合金电磁屏蔽性能的影响. 《兵器材料科学与工程》.
259. 薛勇，陈帅帅，吴耀金，李宏，张治民（2017）. 杯形件径向-反向复合挤压成形的应变分析. 《兵器材料科学与工程》.
260. 白冰，薛勇，陈帅帅，吴耀金，张治民，李宏（2017）. 杯状件径向-反向复合挤压成形力的上限分析. 《兵器材料科学与工程》.
261. Yong Jun Xue, Bing Zhe Bai, Suaisuai Chen, Hong Li, Zhimin Zhang, Bowen Yang (2017). Study on processing and structure property of Al-Cu-Mg-Zn alloy cup-shaped part produced by radial-backward extrusion. The International Journal of Advanced Manufacturing Technology.DOI
262. Jianmin Yu, Zhimin Zhang, Qiang Wang, Xueyan Yin, Jinyu Cui, Qi Hongna (2017). Dynamic recrystallization behavior of magnesium alloys with LPSO during hot deformation. Journal of Alloys and Compounds.DOI
263. Qiang Wang, Zhimin Zhang, Jianmin Yu, Yong Jun Xue (2017). A novel backward extrusion process through rotating die and open punch. Procedia Engineering.DOI
264. Jianmin Yu, Zhimin Zhang, Qiang Wang, Hongyuan Hao, Jinyu Cui, Linlin Li (2017). Rotary extrusion as a novel severe plastic deformation method for cylindrical tubes. Materials Letters.DOI
265. Yong Jun Xue, Yue Du, Zhimin Zhang, Youwang Huang, Lafeng Guo (2017). Processing Map of Powder Metallurgy Al-W Alloys at Elevated Temperatures. Journal of Materials Engineering and Performance.DOI
266. Yong Jun Xue, Zhihui Yang, Bing Zhe Bai, Zhimin Zhang, Yue Du, Luying Ren (2017). Effect of different cyclic expansion–extrusion processes on microstructure and mechanical properties of AZ80 magnesium alloy. Advances in Mechanical Engineering.DOI
267. 齐红娜，张治民，于建民，尹雪雁，郁湘（2016）. Mg-13Gd-4Y-2Zn-0.5Zr镁合金压缩过程的动态再结晶. 《兵器材料科学与工程》.
268. 陈刚，陈伟，章国伟，郑顺奇，张治民（2016）. 不同变形方式下Al-12Zn-2.4Mg-1.2Cu合金的微观组织与力学性能研究（英文）. 《稀有金属材料与工程》.
269. 薛勇，赵熹，杨治辉，张治民（2016）. 扩挤变形对7A04铝合金组织与性能的影响研究. 《兵器材料科学与工程》.
270. 田治坤，张治民，于建民，于海涛，杨亚琴（2016）. 热处理对大型变形高强耐热镁合金组织与性能的影响. 《新技术新工艺》.
271. 秦清风，谭迎新，杨勇彪，张治民（2016）. 7A04铝合金车轮半成品热变形行为研究. 《轻合金加工技术》.
272. 杜志远，于建民，张治民，尹雪雁（2016）. 分级均匀化对稀土镁合金Mg-Gd-Y-Nd-Zr组织和力学性能的影响. 《热加工工艺》.
273. 梁柱，李国俊，张治民，马晓虎，吴莹（2016）. 5A06铝合金带筋薄板件挤压缺陷的模拟分析及优化. 《锻压技术》.
274. 杨思宇，于建民，张宝红，张治民，任刚（2016）. 多向锻造对Mg-13Gd-4Y-0.5Zr镁合金组织及力学性能的影响. 《热加工工艺》.
275. 张慧芳，王建宏，曹亚峰，张治民，王强（2016）. Ti-C-Al复合涂层与镁合金基体连接界面微观结构研究. 《热加工工艺》.
276. 赵熹，李宏，薛勇，张治民，王琳（2016）. 2A12铝合金杯形件“山”字型腔反挤压成形损伤研究. 《热加工工艺》.
277. 程传坤，杨勇彪，张治民，张龙（2016）. 变形态AZ80+T5镁合金动态力学行为各向异性研究. 《兵器材料科学与工程》.
278. 杜玥，张治民，薛勇，尹燕（2016）. Mg-13Gd-4Y-2Zn-0.5Zr合金高温压缩断裂行为研究. 《兵器材料科学与工程》.
279. 赵熹，张治民，薛勇（2016）. 变壁厚回转体构件辊挤-引伸成形模具优化设计. 《兵器材料科学与工程》.
280. 宋超，李国俊，吴莹，张治民，周小京，张冠世（2016）. 某复杂盒体的挤压成形方案比较分析. 《兵器材料科学与工程》.
281. 周小京，李国俊，张治民，吴莹（2016）. 不同高宽比对铝合金桥形件成形性的影响. 《锻压技术》.
282. Xubin Li, Zhimin Zhang, Qiang Wang, Guojun Li (2016). Mechanism of split-flow forming characteristics in plastic forming processing. The International Journal of Advanced Manufacturing Technology.DOI
283. Jianmin Yu, Qiang Wang, Zhimin Zhang, Xubin Li (2016). Multi-objective optimizations of multidirectional forming mold based on fractional factorial design. The International Journal of Advanced Manufacturing Technology.DOI
284. Xi Cheng Zhao, Zhimin Zhang, Yong Jun Xue (2016). An optimum design on rollers containing the groove with changeable inner diameter based on response surface methodology. Advances in Mechanical Engineering.DOI
285. Xi Cheng Zhao, Hengliang Wu, Zhimin Zhang (2016). A new rolling–extrusion technology for the forming of the hollow cylindrical component. The International Journal of Advanced Manufacturing Technology.DOI
286. 陈刚，陈伟，马力，郭安振，吕娟，张治民，郑顺奇（2015）. Al-12Zn-2.4Mg-1.2Cu合金流变行为的应变补偿Arrhenius本构模型研究(英文). 《稀有金属材料与工程》.
287. 李旭斌，安自朝，张治民，王强，李国俊，于建民（2015）. 高强铝合金复杂筋板构件分流开放加载. 《塑性工程学报》.
288. 刘翠侠，张治民，李国俊，薛勇，张福祥（2015）. 铝合金框体挤压件折叠缺陷改进方案的研究. 《热加工工艺》.
289. 杨亚琴，张治民，李保成，王子田，田治坤（2015）. 形变热处理ZK60镁合金抗弹性能研究. 《兵器材料科学与工程》.
290. 张佳磊，王强，张治民（2015）. 镁合金负重轮成形工艺研究. 《兵器材料科学与工程》.
291. 贾泽伟，张治民，王康（2015）. 变形次数对喷射成形超高强铝合金组织和性能的影响. 《热加工工艺》.
292. 陈刚，马力，郭安振，陈伟，张治民，郑顺奇（2015）. 喷射沉积超高强铝合金唯象本构方程材料常数应变补偿分析. 《兵器材料科学与工程》.
293. 马力，陈刚，郭安振，郭智敏，郑顺奇，张治民（2015）. 不同失稳判据下喷射沉积超高强铝合金热变形失稳区域分布及演变特点. 《兵器材料科学与工程》.
294. 马晓虎，李国俊，张宝红，张治民，梁柱（2015）. 铝合金双筒带隔筋挤压件成形工艺研究. 《轻合金加工技术》.
295. Qingfeng Qin, Yingxin Tan, Zhimin Zhang, Qiang Wang, Yongbiao Yang (2015). Effects of Homogenization on Hot Deformation Behavior of As-Cast Mg-8Gd-3Y-1Nd-0.5Zr Magnesium Alloy. Journal of Materials Engineering and Performance.DOI
296. 贺浩，张治民（2014）. Mg-8Gd-3Y-1Nd-0.5Zr合金挤压及时效的组织与力学性能. 《热加工工艺》.
297. 任凤丽，张治民，张素转，杨永彪，于建民（2014）. Mg-8Gd-3Y-1Nd-0.5Zr稀土镁合金的均匀化热处理. 《热加工工艺》.
298. 任大为，张治民（2014）. 热处理对Mg-Gd-Y-Nd-Zr挤压合金组织和力学性能的影响. 《热加工工艺》.
299. 赵熹，张治民，张宝红（2014）. 变壁厚筒形构件辊挤成形过程数值模拟. 《兵器材料科学与工程》.
300. 王芳，张治民，王录才，吕猛，朱亮（2014）. Al-Ti-B4C-TiH2系燃烧合成反应制备泡沫铝合金的热力学研究. 《太原理工大学学报》.
301. 于建民，张治民，李旭斌，张月倩，张佳磊（2014）. 热处理工艺对Mg-Gd-Y-Nd-Zr合金组织和性能的影响. 《特种铸造及有色合金》.
302. Lafeng Guo, Zhimin Zhang, Baocheng Li, Yong Jun Xue (2014). Modeling the constitutive relationship of powder metallurgy Al–W alloy at elevated temperature. Materials & Design (1980-2015).DOI
303. Yongbiao Yang, Xie Zhiping, Zhimin Zhang, Xubin Li, Qiang Wang, Yanhui Zhang (2014). Processing maps for hot deformation of the extruded 7075 aluminum alloy bar: Anisotropy of hot workability. Materials Science and Engineering A.DOI
304. Mu Meng, Xi Cheng Zhao, Zhimin Zhang, Qiang Wang (2014). Effects of Compression-Pass on Microstructure and Mechanical Properties of AZ80 Alloy. Journal of Materials Engineering and Performance.DOI
305. Xubin Li, Zhimin Zhang, Qiang Wang, Yongbiao Yang, Guojun Li (2014). Forming process optimization for non-axisymmetrical complex component based on FEM simulation and experiment. The International Journal of Advanced Manufacturing Technology.DOI
306. Yong Jun Xue, Zhimin Zhang, Guang Hong Lu, Xie Zhiping, Yongbiao Yang, Ya Hui Cui (2014). Study on Flow Stress Model and Processing Map of Homogenized Mg-Gd-Y-Zn-Zr Alloy During Thermomechanical Processes. Journal of Materials Engineering and Performance.DOI
307. 杨勇彪，张治民，王强（2013）. 变形次数及温度对7A04铝合金微观组织及力学性能影响的研究. 《热加工工艺》.
308. 杨勇彪，张治民，王强（2013）. 挤压7A04铝合金轮辋断裂失效分析. 《轻合金加工技术》.
309. 吴立波，薛勇，张治民，张春雨（2013）. 铝合金筒体侧向挤压润滑条件分析及润滑剂配比研究. 《轻合金加工技术》.
310. 吴立波，朱庆，薛勇，张治民，张春雨（2013）. 铝合金筒件侧向等温挤压成形的金属流动分析. 《锻压技术》.
311. 李艳，张治民，倪杨，谢志平，薛勇，杨勇彪（2013）. 变形温度和程度对ZK60镁合金组织和力学特性的影响. 《兵器材料科学与工程》.
312. 郑顺奇，张治民（2013）. 镁合金圆环约束镦粗过程的形变均匀性数值仿真研究. 《兵器材料科学与工程》.
313. 郑伟龙，王明哲，张治民（2013）. 铝合金轮辋成形工艺分析. 《热加工工艺》.
314. 王明哲，王麟平，张宝红，张治民（2013）. 铝合金锥壳体成形工艺分析. 《热加工工艺》.
315. 田甲，张治民，胡慧中（2013）. 时效处理对LY12铝合金残余变形的影响. 《热加工工艺》.
316. Zitian Wang, Yaqin Yang, Baocheng Li, Yanhui Zhang, Zhimin Zhang (2013). Effect of hot-deformation on microstructure and mechanical properties of AZ80 magnesium alloy. Materials Science and Engineering A.DOI
317. Lafeng Guo, Baocheng Li, Zhimin Zhang (2013). Constitutive relationship model of TC21 alloy based on artificial neural network. Transactions of Nonferrous Metals Society of China.DOI
318. Yongbiao Yang, Zhimin Zhang, Xubin Li, Qiang Wang, Yanhui Zhang (2013). The effects of grain size on the hot deformation and processing map for 7075 aluminum alloy. Materials & Design (1980-2015).DOI
319. Zhimin Zhang (2013). Analysis on Forming Process of Aluminum Alloy Conical Shell. Rejiagong gongyi.
320. Zhimin Zhang (2013). Optimization Analysis of A Car Steering Bracket Based on DEFORM-3D. Rejiagong gongyi.
321. Zhimin Zhang (2013). Study on Hell-Petch of AZ80 Mg Alloy Under Solution Treatment Condition. Rejiagong gongyi.
322. 薛勇，张治民，吴耀金，郎利辉（2012）. AZ80镁合金热变形临界损伤因子与动态再结晶软化唯象本构研究. 《稀有金属材料与工程》.
323. 朱亚哲，李保成，张治民（2012）. 镁合金的特点及其塑性加工技术研究进展. 《热加工工艺》.
324. 张春雨，张治民，李新凯，肖柳娟（2012）. 温度对某复杂外形铝合金筒体等温挤压成形的影响. 《热加工工艺》.
325. 徐庆军，张治民，杨勇彪（2012）. 7075铝合金高温热变形性能的研究. 《热加工工艺》.
326. 李国俊，任静茹，张治民（2012）. 铝合金杯类零件双面及侧面成形工艺研究. 《锻压技术》.
327. 张治民，张星（2012）. 高强铝合金构件控制塑性成形技术在装备轻量化中的应用. 《新技术新工艺》.
328. Yongbiao Yang, Zhimin Zhang, Xing Zhang (2012). Processing map of Al2O3 particulate reinforced Al alloy matrix composites. Materials Science and Engineering A.DOI
329. Zhimin Zhang (2012). Design of Cooling System for Spinning-drawing Equipment and Flow Analysis. Rejiagong gongyi.
330. Zhimin Zhang (2012). Calculation method for precision extrusion of a high precision cup shaped part. Suxing gongcheng xuebao.
331. 于建民，张治民，张慧芳，王强（2011）. Ti-6Al-2Sn-4Zr钛合金热变形行为和组织的研究. 《锻压技术》.
332. 孙强，杨勇彪，张治民（2011）. 7A04铝合金压缩力学性能的各向异性. 《热加工工艺》.
333. 张义，张治民（2011）. 热变形对高温BTi-62421S钛合金组织及性能影响. 《热加工工艺》.
334. 孙强，郑文明，杨勇彪，张治民（2011）. 温度对多次变形铝合金力学性能及微观组织的影响. 《热加工工艺》.
335. 李鸿杰，张星，杨勇彪，张治民（2011）. 热处理对变形纳米Al2O3颗粒增强铝基复合材料硬度和耐磨性的影响. 《热加工工艺》.
336. 王红宇，张宝红，张治民（2011）. 某复杂外形铝合金筒体挤压成形工艺. 《热加工工艺》.
337. 程恒山，李国俊，张治民（2011）. 复杂形状铝合金零件等温挤压成形工艺及模具设计. 《热加工工艺》.
338. 杨光，张宝红，李国俊，张治民（2011）. 某铝合金筒形壳体的温挤压成形工艺. 《热加工工艺》.
339. 李艳，张治民，薛勇（2011）. 时效处理对AZ80和ZK60镁合金微观组织和力学性能的影响(英文). Transactions of Nonferrous Metals Society of China.
340. 杨亚琴，李保成，张治民（2011）. 高速冲击载荷作用下AZ80镁合金抗弹性能研究. 《兵器材料科学与工程》.
341. 孟模，张治民，李大旭，李慧娟（2011）. 高性能铝合金车轮制造技术. 《科技创新与生产力》.
342. Mu Meng, Zhimin Zhang, Baohong Zhang, Dou Jin (2011). Flow behaviors and processing maps of as-cast and as-homogenized AZ91 alloy. Journal of Alloys and Compounds.DOI
343. Baohong Zhang, Zhimin Zhang (2011). Study on microstructure and mechanical properties of extruded as-cast AZ80 magnesium alloy. International Conference on Consumer Electronics, Communications and Networks (CECNet).DOI
344. Cheng Hengshan, Guojun Li, Zhimin Zhang (2011). Isothermal Extrusion Process and Die Design of Aluminum Alloy Component With Complex Shape. Rejiagong gongyi.
345. Zhimin Zhang (2011). Warm Extrusion Process for Aluminum Alloy Cylinder Shaped Shell. Rejiagong gongyi.
346. Zhimin Zhang (2011). Numerical Simulation of Magnesium Alloy Hub with Steel Ring. Rejiagong gongyi.
347. Zhimin Zhang (2011). Effect of Deformation Temperature on Corrosion Resistance of AZ80 Alloy. Rejiagong gongyi.
348. Zhimin Zhang (2011). Effect of Heat Defromation on Microstructure and Property of BTi-62421S Alloy. Rejiagong gongyi.
349. Huifang Zhang, Zhimin Zhang, Xing Zhang, Baocheng Li, Hong-hai Ma (2011). High temperature deformation behavior of BTi‐62421S alloy. Rare Metals.DOI
350. Baohong Zhang, Zhimin Zhang (2011). Influence of extrusion on microstructure and mechanical properties of as-cast AZ80 magnesium alloy. International Conference on Remote Sensing, Environment and Transportation Engineering.DOI
351. Yan Li, Zhimin Zhang, Yong Jun Xue (2011). Influence of aging on microstructure and mechanical properties of AZ80 and ZK60 magnesium alloys. Transactions of Nonferrous Metals Society of China.DOI
352. Zhimin Zhang (2011). Research on isothermal spinning unit of magnesium alloy rim. Machinery Design and Manufacture.
353. Zhimin Zhang (2011). Study on Necking Process for 7A04 Alloy Can. Rejiagong gongyi.
354. 张慧芳，张治民，张星，李保成，马鸿海（2010）. BTi-62421S合金高温变形流动应力模型. 《中国有色金属学报》.
355. 周义清，张治民（2010）. 30CrMnSiNi2A钢在不同应变率下的力学性能研究. 《兵器材料科学与工程》.
356. 常列珍，潘玉田，张治民，薛勇（2010）. 一种调质50SiMnVB钢Johnson-Cook本构模型的建立. 《兵器材料科学与工程》.
357. 张慧芳，张治民，张星，李保成，马鸿海（2010）. 热变形参数对BTi—62421S合金微观组织及性能的影响. 《第十四届全国钛及钛合金学术交流会论文集（上册）》.
358. 张慧芳，张治民，张星，李保成，马鸿海（2010）. 热变形参数对BTi-62421S合金微观组织及性能的影响. 《中国有色金属学报》.
359. 常列珍，潘玉田，张治民，付文清（2010）. 热处理工艺对50SiMnVB合金钢的准静态压缩性能的影响. 《中北大学学报(自然科学版)》.
360. 周义清，张治民（2010）. 热处理对30CrMnSiNi2A钢组织与动态性能的影响. 《锻压装备与制造技术》.
361. 王强，关玲，张治民（2010）. 7A04铝合金厚壁筒扩口成形工艺研究. 《热加工工艺》.
362. Xu-bin Li, Zhimin Zhang (2010). Numerical Simulation of AZ31 Magnesium Alloy Isothermal Forming. International Forum on Information Technology and Applications.DOI
363. Zhimin Zhang (2010). Investigation on backward extrusion of hollow billet with force saving. Suxing gongcheng xuebao.
364. Song Xianhua, Xing Zhang, Zhimin Zhang (2010). Properties of Thrust Bearing of Extrusion Aluminum Brass HAl60-1-1. Rejiagong gongyi.
365. Qiang Wang, Guan Ling, Zhimin Zhang (2010). Investigation on Expanding Process of 7A04 Aluminum Alloy Tluclk Wall Can. Rejiagong gongyi.
366. Qiang Wang, Zhimin Zhang, Xing Zhang, Guojun Li (2010). New extrusion process of Mg alloy automobile wheels. Transactions of Nonferrous Metals Society of China.DOI
367. Baohong Zhang, Zhimin Zhang (2010). Influence of homogenizing on mechanical properties of as-cast AZ31 magnesium alloy. Transactions of Nonferrous Metals Society of China.DOI
368. Zhimin Zhang (2010). Extrusion Process Optimization of Varying Thickness Conical Parts. Rejiagong gongyi.
369. 常列珍，张治民，范煜珩（2009）. 回火温度对50SiMnVB合金钢动态力学性能的影响. 《中北大学学报(自然科学版)》.
370. 董海涛，张治民（2009）. 铝合金网格内筋零件成形工艺研究. 《大型铸锻件》.
371. 刘健，张治民，张宝红（2009）. 铝合金叶片挤压工艺及模具设计. 《热加工工艺》.
372. 张治民（2009）. 重型装甲车辆用铝合金轮辋省力成形技术研究. 《国防制造技术》.
373. 吴耀金，张星，张治民，李保成（2009）. ZL102合金热压缩变形力学性能和微观组织的研究. 《陕西科技大学学报》.
374. 李伟，张宝红，张治民（2009）. T6热处理对AZ80镁合金组织及性能的影响. 《热加工工艺》.
375. 张慧芳，张治民（2009）. ZTC4钛合金筒形件等温挤压工艺分析及模具设计. 《新技术新工艺》.
376. 薛智，张治民，于建民，吴耀金（2009）. 30CrMnSiNi2A钢的动态屈服强度研究. 《兵器材料科学与工程》.
377. Zhimin Zhang (2009). Analysis of Alloy ZTC4 Barrel Isothermal Extrusion and Dies Design. New Technology & New Process.
378. Zhimin Zhang (2009). Influence of Process Parameters on Amount of Deformation During Warm Reshaping of Blade. Rejiagong gongyi.
379. Zhimin Zhang (2009). Investigation on forming technology with decreasing force of aluminum alloy wheel for heavy armored car.
380. Zhimin Zhang (2009). Influence of Extrusion and T5 Treatment on Microstructure and Mechanical Properties of As-cast ZK60 Magnesium Alloy. Rejiagong gongyi.
381. Zhimin Zhang (2009). Analysis of Heat/Force Simulation of ZK60 Magnesium Alloy. Journal of North University of China.
382. Zhimin Zhang (2009). Study on cold sizing of spur gear. Die & Mould Industry.
383. Zhimin Zhang, Baohong Zhang (2009). INFLUENCE OF T5 TREATMENT ON MICROSTRUCTURE AND PROPERTIES OF EXTRUDED ZK60 MAGNESIUM ALLOY. International Journal of Modern Physics B.DOI
384. Zhimin Zhang (2009). Research on the improvement of warm forming process for the projectile body. Modern Manufacturing Engineering.
385. Zhimin Zhang (2009). Development and Implementation of Warm Forming CAPP System for Projectile Body. Rejiagong gongyi.
386. Zhimin Zhang (2009). Research of Spinning-drawing Equipment for Cup Parts. China Metal Forming Equipment & Manufacturing Technology.
387. 张慧芳，张治民（2008）. 钛合金成型新技术. 《山西科技》.
388. 张慧芳，张治民（2008）. 钛合金薄壁复杂构件精密成形技术现状及发展. 《航空制造技术》.
389. 陈刚，张治民，王强，史美霞，蔡月华（2008）. 热加工参数对AZ80合金力学性能的影响. 《热加工工艺》.
390. 曹安斋，方敏，张治民，柴国瑞（2008）. 铝合金带筋筒形件成形数值模拟研究. 《热加工工艺》.
391. 薛智，于建民，张治民（2008）. 重型车辆铝合金轮辋反挤压直径比对金属流动的影响. 《热加工工艺》.
392. 崔亚，张治民，倪杨（2008）. 热处理对50SiMnVB钢的动态性能与组织的影响. 《兵器材料科学与工程》.
393. 孙卫刚，张治民，王强（2008）. 锻造次数对7A04铝合金组织和力学性能影响. 《热加工工艺》.
394. 李兆智，杨亚琴，张治民，李保成（2008）. AZ80变形镁合金形变热处理组织性能研究. 《热加工工艺》.
395. 尹从娟，张星，张治民（2008）. 热处理工艺对MB26镁合金组织性能的影响. 《热加工工艺》.
396. 王姝，张治民，王强（2008）. 铝合金轮辋焊-锻复合成形的可行性研究. 《热加工工艺》.
397. Qiang Wang, Zhimin Zhang, Xing Zhang, Jianmin Yu (2008). Precision forging technologies for magnesium alloy bracket and wheel. Transactions of Nonferrous Metals Society of China.DOI
398. Zhimin Zhang (2008). The effect of distortion condition on mechanical behavior of AZ61 magnesium alloy. Suxing gongcheng xuebao.
399. Zhimin Zhang (2008). Simulation Research on Multidirectional Extrusion of Three-Way Parts. Nonferrous Metals Processing.
400. Zhimin Zhang (2008). Research on extrusion forming process of irregular parts with high strength. Duanya jishu.
401. Zhimin Zhang (2008). Effect of Deformation on the Structure Property of AZ31 Magnesium Alloy. New Technology & New Process.
402. Zhimin Zhang (2008). Numerical Simulation of Forming Process for Airborne Radar Shielding Slab. Rejiagong gongyi.
403. Zhimin Zhang (2008). Numerical Simulation on Warm Extrusion Forming of Irregular Parts with High Strength. Rejiagong gongyi.
404. Zhimin Zhang (2008). Influence of Diameter Ratio on Metal Flow in Aluminum Alloy Rim of Heavy Vehicle. Rejiagong gongyi.
405. Zhimin Zhang (2008). Influence of grain size on hot working stresses in AZ80 Mg alloy. Suxing gongcheng xuebao.
406. Zhimin Zhang (2008). Influences of Temperature and Extrusion Ratio on Microstructures and properties of AZ31 Magnesium alloy. Nonferrous Metals Processing.
407. Zhimin Zhang (2008). Experimental study on warm cold compound forming of steel seat. Duanya jishu.
408. Yaqin Yang, Baocheng Li, Zhimin Zhang (2008). Analysis on flow stress of magnesium alloys during high temperature deformation. Transactions of Nonferrous Metals Society of China.DOI
409. Li Zhaozhi, Yaqin Yang, Zhimin Zhang (2008). Transformation mechanism of lamellar microstructure of AZ80 wrought Mg alloy during warm deformation. Transactions of Nonferrous Metals Society of China.DOI
410. Hongyan Xu, Qiang Wang, Zhimin Zhang (2008). Effect of thermal processing on microstructure and mechanical properties of AZ80 magnesium alloy. Transactions of Nonferrous Metals Society of China.DOI
411. 王强，张治民，张星，李保成（2007）. ZTC4钛合金温变形力学行为研究. 《稀有金属材料与工程》.
412. 张星，张治民，李保成（2007）. 时效处理对AZ80镁合金冲击韧度的影响. 《金属热处理》.
413. 张宝红，张治民，李大旭（2007）. 温成形杯形件组织性能研究. 《材料科学与工艺》.
414. 冯再新，王志云，张治民，柏立敬（2007）. 5A06铝合金温变形工艺对显微组织影响的研究. 《弹箭与制导学报》.
415. 徐恒秋，张治民，李琳琳，王强，张星（2007）. 塑性工艺参数对ZTC4钛合金应力-应变和组织的影响. 《塑性工程学报》.
416. 张治民，王强，李兆智（2007）. AZ80镁合金热变形行为和微观组织演变研究. 《第十届全国塑性工程学术年会、第三届国际塑性加工先进技术研讨会论文集》.
417. 李艳萍，张治民，武月英（2007）. 套筒类7A04铝合金挤压成形金属流动规律研究. 《热加工工艺》.
418. 柴国瑞，方敏，张治民，曹安斋（2007）. 铝合金内腔网格筋件挤压成形数值模拟研究. 《热加工工艺》.
419. 孙卫刚，张治民，王强（2007）. 铝合金轮毂等温挤压工艺与模具设计. 《新技术新工艺》.
420. 李艳萍，张治民，李保成（2007）. 铝合金材料在汽车工业中的应用与展望. 《铝加工》.
421. 席鹏翀，王强，张治民（2007）. LC4超高强度铝合金轮毂的成形工艺研究. 《锻压装备与制造技术》.
422. 柏立敬，冯再新，张治民（2007）. 5A06铝合金变形工艺参数与显微组织关系实验研究. 《有色金属加工》.
423. Zhimin Zhang (2007). Research on Forward Extrusion Technology of AZ31B Magnesium Alloy. Mechanical Engineering & Automation.
424. Zhimin Zhang (2007). Production Method of Automobile Disc Hub of LC4 Al Superhard. China Metal Forming Equipment & Manufacturing Technology.
425. Zhimin Zhang (2007). Forming process and die design for steel base frame. Die & Mould Industry.
426. Zhimin Zhang (2007). Finite element analysis of extrusion forming of deep hole tubular workpiece. Duanya jishu.
427. Zhimin Zhang (2007). The Familiar Defect of Spinning Product and Counterplans. China Metal Forming Equipment & Manufacturing Technology.
428. Zhimin Zhang (2007). Evolution on Anti-impact Behavior of Amour Steel by the Grain Size. Journal of Projectiles.Rockets.Missiles and Guidance.
429. Zhimin Zhang (2007). Influence of Ageing Treatment on Impact Property of AZ80 Magnesium Alloy. New Technology & New Process.
430. Zhimin Zhang (2007). Forming Process and Die Design for Cups. China Metal Forming Equipment & Manufacturing Technology.
431. 李保成，赵家萍，张治民（2006）. 钛合金炮口制退器铸造-挤压成形强化技术研究. 《兵器材料科学与工程》.
432. 张宝红，张星，张治民（2006）. 20CrMnTi钢两相区变形力学行为及微观组织研究. 《材料科学与工艺》.
433. 吴耀金，张治民（2006）. 铝合金LF6变形工艺与微观组织关系的研究. 《热加工工艺》.
434. Zhimin Zhang (2006). Study on Deformation and Toughening of AZ31 Magnesium Alloy. Rejiagong gongyi.
435. Zhimin Zhang (2006). The Numerical Simulation of Forming Process of Warm Extrusion of Complex Cup Part. China Metal Forming Equipment & Manufacturing Technology.
436. Zhimin Zhang (2006). Effect of Billet Temperature on the Backward Extrusion of AZ31 Mg Alloy. Cailiao gongcheng.
437. Zhimin Zhang (2006). Research on Extrusion Forming Process of Pedestal. Mechanical Engineering & Automation.
438. Zhimin Zhang (2006). Research on Extrusion Forming Process of Empennage Epedestal. Rejiagong gongyi.
439. Zhimin Zhang (2006). Production methods of the automobile disc wheel of light metal alloy. Light Alloy Fabrication Technology.
440. Zhimin Zhang (2006). The Shaping Technologic Study of Bearing Board Avoiding to Push which Ingredient is the Casting Leaded Bronze. Journal of Projectiles.Rockets.Missiles and Guidance.
441. Zhimin Zhang (2006). Actualities and Prospects of Spur Gears' Gorging Technology. China Metal Forming Equipment & Manufacturing Technology.
442. Zhimin Zhang (2006). Extruding technology study of casting lead bronze plate components. Duanya jishu.
443. Zhimin Zhang (2006). The Studies on Spinning Equipment Craft. China Metal Forming Equipment & Manufacturing Technology.
444. Zhimin Zhang (2006). Numerical Simulation of Tracklayer Extrusion Process. China Metal Forming Equipment & Manufacturing Technology.
445. 方敏，王利民，张治民，蔡中民（2005）. 多弯角宽板弯曲成形板厚变化特性研究. 《第九届全国塑性工程学术年会、第二届全球华人先进塑性加工技术研讨会论文集（二）》.
446. 李琳琳，张治民（2005）. 汽车用镁合金及其塑性加工技术. 《轻合金加工技术》.
447. 牛建国，张治民，张星（2005）. 温度对LD10合金等温变形特性的影响. 《国际材料科学与工程学术研讨会论文集（上册）》.
448. 张治民，王强，李保成（2005）. AZ31镁合金温变形对其性能影响的研究. 《材料科学与工艺》.
449. Zhimin Zhang (2005). Plastic Forming Technology of Magnesium Alloy and Its Application to Automobile. Nonferrous Metals Processing.
450. Zhimin Zhang (2005). Study on the Law of Metal Flow of Bend Forming Process of Sheet Metal with Multi-Bends. China Metal Forming Equipment & Manufacturing Technology.
451. 王强，张治民，张星（2004）. 变形参数对LD10铝合金组织及性能的影响. 《中北大学学报(自然科学版)》.
452. 李保成，张星，张治民（2004）. 镁合金温变形后的组织与性能. 《兵器材料科学与工程》.
453. 张治民，张宝红，马映峰（2004）. 花键冷挤压用组合凹模内径收缩量的计算. 《材料科学与工艺》.
454. 张治民，张星，王强，吴海峰（2004）. ZTC4的变形组织及力学性能研究. 《塑性工程学报》.
455. 张星，李保成，张治民，王强（2004）. MB2镁合金变形组织性能研究. 《材料科学与工艺》.
456. 张宝红，张星，张治民（2003）. 35CrMnSi钢温成形力学行为研究. 《材料科学与工艺》.
457. 李保成，赵家萍，张治民（2003）. 低温形变热处理对20CrMnTi钢冲击韧度的影响. 《热加工工艺》.
458. 乌兰其其格，方敏，张治民（2002）. 变壁厚双锥壳体挤压成形过程数值模拟. 《第八届全国塑性加工学术年会论文集》.
459. 李涛，方敏，张治民，施飞（2002）. 摩擦对弹体温挤成形的影响. 《第八届全国塑性加工学术年会论文集》.
460. 冯再新，张治民，乔俊强，张玲娟，周贤宾（2002）. 直齿轮“渗碳-温挤”渗碳层厚度分布模型. 《材料科学与工艺》.
461. 方敏，张治民（2002）. 高炉氧气喷头底部挤压成形数值模拟及工艺研究. 《第八届全国塑性加工学术年会论文集》.
462. 张星，张治民，李保成（2002）. 温挤成形齿轮组织性能研究. 《第八届全国塑性加工学术年会》.
463. 张治民，方敏（1998）. 60Si2Mn温变形力学行为研究. 《材料科学与工艺》.
464. 张治民，方敏，李一峰，侯建民（1998）. 弹钢温变形特性研究及力学模型建立. 《兵工学报》.
465. 张治民，张宝红，冯再新，董妍兰（1998）. 轴套镦挤成形过程的计算机模拟与工艺优化. 《材料科学与工艺》.

预印本

1. Xianwei Ren, Zexing Su, Yugang Ye, Rongrong Ji, Zhimin Zhang, Qiang Wang, Xi Cheng Zhao (2026). Physically-motivated constitutive model of hybrid fabricated 5356-WAAM/7055-rolled aluminum alloy with heterogeneous characteristics. SSRN Electronic Journal.DOI
2. Shuchang Li, Xi Cheng Zhao, Pengcheng Gao, XingMao Mu, Zhimin Zhang, ShuaiLing Kan, Fafa Yan (2023). The Development of a W-Shaped Channel Extrusion for Fabricating Larger Size Magnesium Alloy Shells with Short Process and Simultaneous Weakening of Mechanical Anisotropy. SSRN Electronic Journal.DOI
3. Siqi Wang, Xi Cheng Zhao, Xianwei Ren, Zhimin Zhang, Yayun He (2022). Effect of Strain Rate on Hot Deformation Behavior and Softening Mechanism of Al–10.0zn–3.0mg–2.8cu Alloy. SSRN Electronic Journal.DOI

书籍章节

1. Qiang Wang, Mu Meng, Xubin Li, Zhimin Zhang (2021). Investigation of Forward–Backward–Radial Extrusion Process of Aluminum Alloy Wheel Hub. ˜The œminerals, metals & materials series.DOI