阎昌琪

期刊论文

1. 赵伟光，于沛，曾晓波，范广铭，阎昌琪（2025）. 华龙一号设备冷却水系统多目标优化设计. 《原子能科学技术》.
2. Zongkun Li, Yiming Yan, Guangming Fan, Jiyun Zhao, Xiaobo Zeng, Changqi Yan (2025). Experimental study on natural circulation flow fluctuation characteristics in tube bundle channels under marine conditions. Nuclear Engineering and Design.DOI
3. Zongkun Li, Y. T. Ou, Guangming Fan, Jiyun Zhao, Xiaobo Zeng, Changqi Yan (2025). Investigation on natural circulation boiling heat transfer characteristics in tube bundle channels under marine conditions. Energy.DOI
4. Weiguang Zhao, Pei Yu, Xiaobo Zeng, Guo‐Xin Fan, Zhaoming Meng, Changqi Yan (2025). Research on the impact of important parameters of component cooling system on design. Progress in Nuclear Energy.DOI
5. Xiaobo Zeng, Yifan Xu, Antonio Cammi, Guangming Fan, Jianjun Wang, Youhong Xiao, Changqi Yan (2025). Simulation of the vane-type bubble separator using a hybrid Euler–Euler/volume-of-fluid approach. Physics of Fluids.DOI
6. Zongkun Li, Guangming Fan, Jiyun Zhao, Xiaobo Zeng, Changqi Yan (2025). Study on the fluid cross-mixing characteristics in tube bundle channels with transverse uneven heat flux distribution. Energy.DOI
7. Weiguang Zhao, Pei Yu, Xiaobo Zeng, Guo‐Xin Fan, Zhaoming Meng, Changqi Yan (2025). Research on multi-objective optimization design of the nuclear island cold chain system in HPR1000 based on a new hybrid genetic algorithm. Progress in Nuclear Energy.DOI
8. Xiaobo Zeng, Chunfeng Zheng, Ang Li, Guangming Fan, Youhong Xiao, Changqi Yan (2025). Numerical study on a new separator for downhole gas-liquid separation. Process Safety and Environmental Protection.DOI
9. Xiaobo Zeng, Li Gao, Guangming Fan, Yifan Xu, Youhong Xiao, Changqi Yan (2024). Simulation and Experimental Validation of a New Separator Design for a Wide Range of Gas Volume Fractions. SPE Journal.DOI
10. Xiaobo Zeng, Yifan Xu, Guangming Fan, Changqi Yan (2024). Assessment of CFD Methods in Simulating Flowfield in a Vane-Type Separator.DOI
11. Weiguang Zhao, Pei Yu, Xiaobo Zeng, Guangming Fan, Zhaoming Meng, Changqi Yan (2024). Research on the configuration scheme and system parameter optimization of pumps in the component cooling system and sea water system for HPR1000. International Journal of Advanced Nuclear Reactor Design and Technology.DOI
12. Zongkun Li, Yiming Yan, Guangming Fan, Xiaobo Zeng, Shuai Hao, Changqi Yan (2024). Non-uniform boiling heat transfer characteristics and calculation evaluation in U-tube steam generator tube bundle. Energy.DOI
13. Fubing Ma, Xiaobo Zeng, Zhiting Yue, Changqi Yan, Guangming Fan, Shuai Hao (2024). Supercharging performance of anti-cavitation schemes in pool-type reactor: Experimental verification and numerical investigation. Progress in Nuclear Energy.DOI
14. Bingtao Pang, Jun Lv, Changqi Yan, Guangming Fan, Hongyan Cheng (2024). Modeling and performance analysis of separate heat pipe containing non-condensable gas for pool-type low-temperature heating reactor. Nuclear Engineering and Design.DOI
15. 阎昌琪（2023）. 先进核反应堆. 《科学出版社》.
16. 孙奥，程杰，朱东保，田春平，王建军，阎昌琪（2023）. 二次侧非能动余热排出系统启动特性研究. 《动力工程学报》.DOI
17. Shuai Hao, Guangming Fan, Zhiting Yue, Rui Zhang, Junxiu Xu, Fubing Ma, Zongkun Li, Changqi Yan (2023). Feasibility study on cooling scheme design of the concrete shielding for swimming pool-type low-temperature heating reactor. Nuclear Engineering and Design.DOI
18. Ao Sun, Jie Cheng, Changqi Yan, Dongbao Zhu, Chunping Tian, Pengzheng Li (2023). Experimental study on the influence of inclination on operating characteristics of secondary side passive residual heat removal system. Annals of Nuclear Energy.DOI
19. Xiaobo Zeng, Meng Wang, Guangming Fan, Jie Cheng, Changqi Yan (2023). A theoretical model for calculating particle trajectory in a vane-type separator. Process Safety and Environmental Protection.DOI
20. Ao Sun, Jie Cheng, Changqi Yan, Dongbao Zhu, Chunping Tian, Pengzheng Li (2023). Experimental study on condensation heat transfer characteristics in C-shaped tube under rolling conditions. Nuclear Engineering and Design.DOI
21. Xiaobo Zeng, Meng Wang, Guangming Fan, Jie Cheng, Changqi Yan (2023). Experimental study on the flow behaviors in a vane-type separator. Chemical Engineering and Processing - Process Intensification.DOI
22. Shuai Hao, Guangming Fan, Junxiu Xu, Changqi Yan, Rui Zhang, Fubing Ma, Zongkun Li, Mingwen Hou (2023). EXPERIMENTAL STUDY ON COOLING SCHEME OF THE CONCRETE AROUND SWIMMING POOL-TYPE LOW-TEMPERATURE HEATING REACTOR. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
23. 徐浚修，范广铭，侯明文，丁铭，岳芷廷，阎昌琪（2022）. 池式低温供热堆非能动余热排出系统单相自然循环流动与传热实验研究. 《原子能科学技术》.
24. 刘安泰，程林海，谷海峰，阎昌琪，孟兆明，龚随军（2022）. 水平窄矩形通道内空气-水两相流动中气弹运动特性研究. 《核动力工程》.
25. 阎昌琪（2022）. 核反应堆结构与材料.
26. Xiaobo Zeng, Guangming Fan, Meng Wang, Le Zhao, Changqi Yan (2022). Experimental and numerical study on the length of LZVV in the bubble separator for molten salt reactor. Nuclear Engineering and Design.DOI
27. Tingting Ren, Zhiqiang Zhu, Jianjun Wang, Changqi Yan (2022). Numerical simulation of flow resistance characteristics in a rod bundle channel under rolling conditions. Annals of Nuclear Energy.DOI
28. Antai Liu, Linhai Cheng, Changqi Yan, Haifeng Gu, Zhaoming Meng (2022). Characteristics of one-dimensional bubbly flow interfacial area transport in horizontal narrow rectangular channel. Process Safety and Environmental Protection.DOI
29. Fubing Ma, Guangming Fan, Junxiu Xu, Changqi Yan, Shuai Hao, Yuning Zhou (2022). Research on the Supercharging Performance of the Annular Multi-Nozzles Ejector at the Suction Port of a Centrifugal Pump. Volume 15: Student Paper Competition.DOI
30. Zhiqiang Zhu, Tingting Ren, Shuaijun Li, Chunping Tian, Changqi Yan, Jianjun Wang (2022). Study on Natural Circulation Flow Resistance Characteristics in a Rod Bundle Channel.DOI
31. Zheng Yan, Weiguang Zhao, Xiaxin Cao, Changqi Yan (2022). Comprehensive Comparison and Analysis for Fast Reactors.DOI
32. Junxiu Xu, Mingwen Hou, Ming Ding, Changqi Yan, Chunqiu Guo, Guangming Fan (2022). Numerical and experimental study on natural convection outside tube bundle under small convection temperature difference. Progress in Nuclear Energy.DOI
33. Xiaobo Zeng, Meng Wang, Guangming Fan, Le Zhao, Changqi Yan (2022). Effects of key structure parameters on flow field and sensitivity analysis for a bubble separator in MSR. Process Safety and Environmental Protection.DOI
34. Antai Liu, Linhai Cheng, Changqi Yan, Haifeng Gu, Zhaoming Meng (2022). Experimental study on length, liquid film thickness and pressure drop of slug flow in horizontal narrow rectangular channel. Process Safety and Environmental Protection.DOI
35. Junxiu Xu, Mingwen Hou, Ming Ding, Changqi Yan, Zhiting Yue, Guangming Fan (2022). Experimental Study on Separate Heat Pipe-type Passive Residual Heat Removal System of Swimming Pool-type Low-Temperature Heating Reactor. Nuclear Engineering and Design.DOI
36. Ding Tao, Guangliang Yang, Chen Kai-Lun, Fan Guang-ming, Meng Zhao-Ming, Changqi Yan, Zhang Ke-fan, Hongli Chen (2022). Heat transfer evaluation of saturated pool boiling outside slender tube bundle in passive residual heat removal system of molten salt reactor. Annals of Nuclear Energy.DOI
37. 高力，张璐，曾晓波，阎昌琪（2021）. 轴流式离心分离器内部流场的数值模拟. 《现代信息科技》.DOI
38. 曾晓波，赵乐，阎昌琪，范广铭（2021）. 熔盐堆气泡分离器内零速包络面的试验研究. 《中国核科学技术进展报告（第七卷）——中国核学会2021年学术年会论文集第2册（核能动力分卷）》.DOI
39. Mingwen Hou, Junxiu Xu, Xiaobo Zeng, Guangming Fan, Changqi Yan (2021). Experimental study on the passive residual heat removal system of swimming pool-type low-temperature heating reactor. Nuclear Engineering and Design.DOI
40. Ding Tao, Guangliang Yang, Fan Guang-ming, Tian Chun-Ping, Meng Zhao-Ming, Chen Kal-lun, Changqi Yan, Hongli Chen (2021). Heat transfer evaluation of natural convection outside the condenser in Passive Residual Heat Removal System of Molten Salt Reactor. Case Studies in Thermal Engineering.DOI
41. Xiaobo Zeng, Chunfeng Zheng, Le Zhao, Guangming Fan, Changqi Yan (2021). The statistical characteristic study of bubble trajectory in an axial separator by a Lagrange method. Process Safety and Environmental Protection.DOI
42. Antai Liu, Changqi Yan, Fuqiang Zhu, Haifeng Gu, Suijun Gong (2021). Liquid film thickness of vertical upward annular flow in narrow rectangular channel. Process Safety and Environmental Protection.DOI
43. Antai Liu, Changqi Yan, Fuqiang Zhu, Haifeng Gu, Suijun Gong (2021). Studying Disturbance Wave Velocity and Wall Shear Stress of Vertical Upward Annular Flow in Narrow Rectangular Channel. Science and Technology of Nuclear Installations.DOI
44. Weiguang Zhao, Xiuan Zhou, Jiangwu Shi, Changqi Yan, Jianjun Wang (2021). Research on Multi-Objective Optimal Design of Plate Heat Exchanger in Nuclear Power Plant Cold Chain System.DOI
45. Antai Liu, Haifeng Gu, Fuqiang Zhu, Changqi Yan (2021). Experimental Study on Measurement of Annular Flow Film Thickness in Vertical Narrow Rectangular Channel.DOI
46. Fuqiang Zhu, Changqi Yan, Antai Liu, Haifeng Gu, Suijun Gong (2021). Droplet size of vertically upward annular flow in a narrow rectangular channel. Process Safety and Environmental Protection.DOI
47. Xiaobo Zeng, Le Zhao, Guangming Fan, Rui Zhang, Changqi Yan (2021). Experimental Investigation on a New Axial Separator for Oil–Water with Small Density Difference. Industrial & Engineering Chemistry Research.DOI
48. Xiaobo Zeng, Le Zhao, Guangming Fan, Changqi Yan (2021). Numerical and experimental study on a new axial separator for liquid-liquid separation. Journal of the Taiwan Institute of Chemical Engineers.DOI
49. Min Zhan, Wanyou Yang, Fenghui Zhang, Changhua Luo, Huaxiao Wu, Peiwen Guo, Qiong Shen, Xiaobo Zeng, Changqi Yan (2021). Experimental Investigation on the Separation Performance for a New Oil-Water Separator. Frontiers in Energy Research.DOI
50. Xiaobo Zeng, Yifan Xu, Le Zhao, Guangming Fan, Changqi Yan (2021). Numerical investigation on axial liquid-liquid separators with different swirl chambers. Chemical Engineering and Processing - Process Intensification.DOI
51. Junxiu Xu, Xibin Xie, Ming Ding, Changqi Yan, Guangming Fan (2021). A one-dimensional code of double-coupled passive residual heat removal system for the swimming pool-type low-temperature heating reactor. Nuclear Engineering and Design.DOI
52. 杨宽，阎昌琪，曹夏昕（2020）. 自然循环窄矩形通道内过冷沸腾两相摩擦阻力特性. 《化工学报》.
53. Areej Mutwakkil Attom, Jin-Cheng Wang, Jie Huang, Changqi Yan, M. Ding (2020). Neutronic analysis of thorium S&B fuel blocks with different driver fuels in advanced Block-type HTRs. Annals of Nuclear Energy.DOI
54. Xiaobo Zeng, Le Zhao, Weiguang Zhao, Mingwen Hou, Fuqiang Zhu, Guangming Fan, Changqi Yan (2020). Experimental Study on a Novel Axial Separator for Oil–Water Separation. Industrial & Engineering Chemistry Research.DOI
55. Xiaobo Zeng, Le Zhao, Guangming Fan, Changqi Yan (2020). Experimental study on the design of light phase outlets for a novel axial oil-water separator. Process Safety and Environmental Protection.DOI
56. Xiaobo Zeng, Le Zhao, Weiguang Zhao, Mingwen Hou, Fuqiang Zhu, Guangming Fan, Changqi Yan (2020). Experimental study on a compact axial separator with conical tube for liquid-liquid separation. Separation and Purification Technology.DOI
57. Shengzhi Yu, Zhen Jia, Cong Wang, Zili Gong, Lei Chen, Changqi Yan (2020). Effect of rolling motion on heat transfer characteristics of narrow rectangular channel with high subcooled boiling. IOP Conference Series Earth and Environmental Science.DOI
58. Tingting Ren, Zhiqiang Zhu, Rui Zhang, Jiangwu Shi, Changqi Yan (2020). Development of force balance model for prediction of bubble departure diameter and lift-off diameter in subcooled flow boiling. International Journal of Heat and Mass Transfer.DOI
59. Xiaobo Zeng, Changqi Yan, Guangming Fan, Jie Cheng, Junxiu Xu, Antai Liu (2020). Experimental Study on Two Different Gas-Liquid Separators Under Different Flow Patterns.DOI
60. Junxiu Xu, Ming Ding, Changqi Yan, Guangming Fan (2020). Experimental Study on Natural Convection Heat Transfer Outside Tube Bundle in Space Under Low Temperature Difference.DOI
61. Pei Yu, Jiaming Wang, Huiyun Ma, Haifeng Gu, Changqi Yan (2020). Calculation and Analysis of Steam Hammer in Main Steam Pipe in HPR1000.DOI
62. Xiaobo Zeng, Guangming Fan, Junxiu Xu, Antai Liu, Yifan Xu, Changqi Yan (2020). Experimental study on a new gas–liquid separator for a wide range of gas volume fraction. Process Safety and Environmental Protection.DOI
63. Tao Ding, Zhaoming Meng, Kailun Chen, Guangming Fan, Changqi Yan (2020). Experimental study on thermal stratification in water tank and heat transfer characteristics of condenser in water-cooled passive residual heat removal system of molten salt reactor. Energy.DOI
64. Tingting Ren, Zhiqiang Zhu, Rui Zhang, Jiangwu Shi, Changqi Yan (2020). Visualization Experiment of Bubble Coalescence in a Narrow Vertical Rectangular Channel. Frontiers in Energy Research.DOI
65. Jiangwu Shi, Rui Zhang, Zhiqiang Zhu, Tingting Ren, Changqi Yan (2020). A modified wall boiling model considering sliding bubbles based on the RPI wall boiling model. International Journal of Heat and Mass Transfer.DOI
66. Areej Mutwakkil Attom, Jincheng Wang, Jie Huang, Changqi Yan, Ming Ding (2020). Comparison of homogeneous and heterogeneous thorium fuel blocks with four drivers in advanced high temperature reactors. International Journal of Energy Research.DOI
67. Tingting Ren, Zhiqiang Zhu, Jiangwu Shi, Changqi Yan, Rui Zhang (2020). Experimental study on bubble sliding for upward subcooled flow boiling in a narrow rectangular channel. International Journal of Heat and Mass Transfer.DOI
68. Tao Ding, Zhaoming Meng, Kailun Chen, Guangming Fan, Changqi Yan (2019). Experimental study on flow characteristic of thimble heat exchanger applied to passive residual heat removal system of molten salt reactor. Applied Thermal Engineering.DOI
69. Xiangcheng Wu, Fei Liu, Jin Lu, Yiwen Liu, Binhang Zhang, Changqi Yan (2019). Unstable characteristics of the heat transfer pipe in the drain tank. Annals of Nuclear Energy.DOI
70. Gang Wang, Changqi Yan, Guangming Fan, Jianjun Wang, Junxiu Xu, Xiaobo Zeng, Antai Liu (2019). Experimental study on a swirl-vane separator for gas–liquid separation. Process Safety and Environmental Protection.DOI
71. Chunfeng Zheng, Wanyou Yang, Gang Wang, Guangming Fan, Changqi Yan, Xiaobo Zeng, Antai Liu (2019). Experimental Study on a New Type of Separator for Gas Liquid Separation. Frontiers in Energy Research.DOI
72. Meiyue Yan, Yongyong Yang, Tingting Ren, Rui Zhang, Changqi Yan (2019). Characteristics of sliding bubbles in subcooled flow boiling in a narrow rectangular channel under natural circulation condition. International Journal of Heat and Mass Transfer.DOI
73. Tingting Ren, Zhiqiang Zhu, Meiyue Yan, Jiangwu Shi, Changqi Yan (2019). Experimental study on bubble nucleation and departure for subcooled flow boiling in a narrow rectangular channel. International Journal of Heat and Mass Transfer.DOI
74. Chunping Tian, Yiwen Liu, Haibo Meng, Zhiqiang Zhu, Jianjun Wang, Changqi Yan (2019). Experimental research on subcooled boiling heat transfer for natural circulation flow in a vertical 3 × 3 rod bundle. Annals of Nuclear Energy.DOI
75. Xiangcheng Wu, Liu Fei, Jin Lu, Changqi Yan (2019). ONB characteristics of the heat transfer tube in the drain tank. International Journal of Heat and Mass Transfer.DOI
76. Zhiqiang Zhu, Tingting Ren, Yiwen Liu, Changqi Yan, Jianjun Wang (2019). Natural circulation two-phase flow characteristics in a rod bundle channel under stable and rolling motion conditions. International Journal of Heat and Mass Transfer.DOI
77. Zhiqiang Zhu, Chunping Tian, Shengzhi Yu, Tingting Ren, Jianjun Wang, Changqi Yan (2019). Natural circulation flow resistance correlations in a rod bundle channel under vertical, inclined and rolling motion conditions. Annals of Nuclear Energy.DOI
78. Areej Mutwakkil Attom, Jincheng Wang, Changqi Yan, Ming Ding (2019). Neutronic analysis of thorium MOX fuel blocks with different driver fuels in advanced block-type HTRs. Annals of Nuclear Energy.DOI
79. Yuqi Lin, Puzhen Gao, Yinxing Zhang, Xianbing Chen, Zongyang Li, Changqi Yan (2019). CHAOTIC EVOLUTION OF PRESSURE DROP OSCILLATIONS IN ROD BUNDLE CHANNEL UNDER NATURAL CIRCULATION CONDITION. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
80. 朱智强，阎昌琪，王建军，田春平（2018）. 棒束通道内自然循环流动阻力特性. 《化工学报》.
81. 陈凯伦，阎昌琪，孟兆明，丁涛（2018）. 套管式换热元件内流动不稳定性研究. 《哈尔滨工程大学学报》.
82. 阎昌琪（2018）. 核工程概论.
83. Meiyue Yan, Tingting Ren, Kailun Chen, Changqi Yan, Yongyong Yang, Chunping Tian, Kuan Yang, Dechun Ai (2018). Visualized Experiment of Bubble Behaviors in a Vertical Narrow Rectangular Channel Under Natural Circulation Condition. Frontiers in Energy Research.DOI
84. Zhiqiang Zhu, Chunping Tian, Shengzhi Yu, Changqi Yan, Jianjun Wang (2018). Experimental study on natural circulation two-phase flow resistance in a vertical 3 × 3 rod bundle channel. International Journal of Heat and Mass Transfer.DOI
85. Tingting Ren, Changqi Yan, Meiyue Yan, Shengzhi Yu (2018). CFD Analysis on Wall Boiling Model During Subcooled Boiling in Vertical Narrow Rectangular Channel.DOI
86. Zhiqiang Zhu, Chunping Tian, Changqi Yan, Jianjun Wang, Tingting Ren, Zehua Guo (2018). Experimental Research on the Flow Resistance and Heat Transfer Characteristics in Rod Bundle Channel.DOI
87. Zhiqiang Zhu, Jianjun Wang, Changqi Yan, Chunping Tian, Shengzhi Yu, Xiaolie Wang (2018). Experimental study on natural circulation flow resistance characteristics in a 3 × 3 rod bundle channel under rolling motion conditions. Progress in Nuclear Energy.DOI
88. Xiaoya Liu, Li Chun, Xiaxin Cao, Changqi Yan, Ming Ding (2018). Numerical analysis on enhanced performance of new coaxial cross twisted tapes for laminar convective heat transfer. International Journal of Heat and Mass Transfer.DOI
89. Kailun Chen, Zhaoming Meng, Changqi Yan, Guangming Fan, Tao Ding (2018). Experimental study on start-up and steady state characteristics of passive residual heat removal system for 2 MW molten salt reactor. Energy.DOI
90. Meiyue Yan, Tingting Ren, Changqi Yan, Kuan Yang, Shengzhi Yu, Yongyong Yang (2018). VISUALIZED EXPERIMENT OF BUBBLE BEHAVIORS IN A NARROW RECTANGULAR CHANNEL UNDER NATURAL CIRCULATION CONDITION. International Heat Transfer Conference (IHTC).DOI
91. Chunping Tian, Zhiqiang Zhu, Yiwen Liu, Kuan Yang, Jianjun Wang, Changqi Yan (2018). LOCAL CONVECTIVE HEAT TRANSFER IN A 3x3 ROD BUNDLE. International Heat Transfer Conference (IHTC).DOI
92. 俞胜之，阎昌琪，王建军，郭雪晴（2017）. 摇摆对单相自然循环系统流动特性的影响分析. 《哈尔滨工程大学学报》.
93. 杨勇勇，曹夏昕，阎昌琪，杨宽，李娜（2017）. 自然循环条件下窄通道内气泡速度特性. 《化工学报》.
94. 刘小丫，丁铭，李春，阎昌琪，齐云飞（2017）. 多孔金属材料强化润滑油传热及阻力特性实验研究. 《核动力工程》.
95. 伍振兴，阎昌琪，田春平，田旺盛，秋穗正（2017）. 自然循环与强迫循环条件下阻力及换热特性对比. 《原子能科学技术》.
96. 杨宗昊，孟兆明，阎昌琪，张鹏，陈凯伦，吴祥成（2017）. 熔盐堆余热排出系统闪蒸流动的不稳定性. 《核技术》.
97. 唐继国，阎明，肖友军，阎昌琪，孙立成（2017）. 基于小波变换的直接接触凝结过程研究. 《哈尔滨工程大学学报》.
98. 王成，阎昌琪，王建军（2017）. 核电汽轮机抽汽系统参数优化. 《哈尔滨工程大学学报》.
99. 田春平，阎昌琪，曹夏昕，王建军，田旺盛，戴斌（2017）. 自然循环窄矩形通道内单相水对流传热特性. 《哈尔滨工程大学学报》.
100. 陈凯伦，阎昌琪，范广铭，孟兆明，丁涛（2017）. 熔盐堆非能动余热排出系统启动特性实验研究. 《第十五届全国反应堆热工流体学术会议暨中核核反应堆热工水力技术重点实验室学术年会论文集》.
101. Chunping Tian, Jianjun Wang, Xiaxin Cao, Changqi Yan, A. Ayodeji Ala (2017). Experimental study on mixed convection in an asymmetrically heated, inclined, narrow, rectangular channel. International Journal of Heat and Mass Transfer.DOI
102. Zonghao Yang, Zhaoming Meng, Changqi Yan, Kailun Chen (2017). Heat transfer and flow characteristics of a cooling thimble in a molten salt reactor residual heat removal system. Nuclear Engineering and Technology.DOI
103. Zhaoming Meng, Lei Ding, Zicheng Qiu, Zhongning Sun, Changqi Yan, Suizheng Qiu, G.H. Su, Wenxi Tian (2017). Model application research for liquid entrainment through ADS-4 pipe in AP1000. Annals of Nuclear Energy.DOI
104. Shengzhi Yu, Changqi Yan, Jianjun Wang, Xiaxin Cao, Zhiqiang Zhu, Cheng Wang (2017). Experimental and numerical study on fluctuations and distributions of fluid temperature under rolling motion conditions. Annals of Nuclear Energy.DOI
105. Cheng Wang, Changqi Yan, Jianjun Wang, Chunping Tian, Shengzhi Yu (2017). Parametric optimization of steam cycle in PWR nuclear power plant using improved genetic-simplex algorithm. Applied Thermal Engineering.DOI
106. Xiaoya Liu, Ming Ding, Haozhi Bian, Changqi Yan, Li Chun (2017). Numerical Study on Heat Transfer and Resistance of a Tube Fitted With New Twisted Tapes for Lubricating Oil.DOI
107. Zhiqiang Zhu, Xiaxin Cao, Changqi Yan, Chunping Tian (2017). Local Single-Phase Heat Transfer Research of Natural Circulation in Narrow Rectangular Channel.DOI
108. Chunping Tian, Xiaxin Cao, Jianjun Wang, Changqi Yan, Kuan Yang, Zhiqiang Zhu, Jianjun Xu (2017). Visualization Study on Onset of Nucleate Boiling for Natural Circulation Flow in a Narrow Rectangular Channel.DOI
109. Kuan Yang, Xiaxin Cao, Changqi Yan, Yongyong Yang, Chunping Tian, Jianjun Xu (2017). Visualization Study of Bubble Sliding Characteristics in a Subcooled Flow Boiling Narrow Rectangular Channel Under Natural Circulation Condition.DOI
110. Chunping Tian, Ming Yan, Jianjun Wang, Xiaxin Cao, Changqi Yan, Shengzhi Yu (2017). Experimental investigation of flow and heat transfer for natural circulation flow in an inclined narrow rectangular channel. Progress in Nuclear Energy.DOI
111. Shengzhi Yu, Jianjun Wang, Ming Yan, Changqi Yan, Xiaxin Cao (2017). Experimental and numerical study on single-phase flow characteristics of natural circulation system with heated narrow rectangular channel under rolling motion condition. Annals of Nuclear Energy.DOI
112. Shengzhi Yu, Ming Yan, Jianjun Wang, Changqi Yan, Xueqing Guo (2017). Numerical investigations on the response of the passive containment cooling system and containment under a DELB LOCA scenario. Progress in Nuclear Energy.DOI
113. 田春平，阎昌琪，王建军，熊昆（2016）. 倾斜对窄矩形通道内流动阻力特性影响. 《化工学报》.
114. 吴祥成，阎昌琪（2016）. 套管型自然循环回路不稳定现象分析. 《原子能科学技术》.
115. 唐继国，阎昌琪，孙立成，莫政宇（2016）. 蒸汽流量对蒸汽直接接触冷凝的影响. 《航空动力学报》.
116. Wangsheng Tian, Xiaxin Cao, Changqi Yan, Zhenxing Wu (2016). Experimental study of single-phase natural circulation heat transfer in a narrow, vertical, rectangular channel under rolling motion conditions. International Journal of Heat and Mass Transfer.DOI
117. Lei Chen, Changqi Yan, Liao Yi, Feifei Song, Zhen Jia (2016). A hybrid non-dominated sorting genetic algorithm and its application on multi-objective optimal design of nuclear power plant. Annals of Nuclear Energy.DOI
118. Xiangcheng Wu, Changqi Yan, Zhaoming Meng, Kailun Chen, Shaochuang Song, Zonghao Yang, Jie Yu (2016). Investigation of Characteristics of Passive Heat Removal System Based on the Assembled Heat Transfer Tube. Nuclear Engineering and Technology.DOI
119. Jiguo Tang, Zhengyu Mo, Licheng Sun, Changqi Yan (2016). An experimental study on Microbubble Emission Boiling in a subcooled pool: Heat transfer characteristics and visualized presentation. Experimental Thermal and Fluid Science.DOI
120. Kailun Chen, Changqi Yan, Zhaoming Meng, Xiangcheng Wu, Shaochuang Song, Zonghao Yang, Jie Yu (2016). Experimental analysis on passive residual heat removal in molten salt reactor using single cooling thimble test system. Energy.DOI
121. Kailun Chen, Changqi Yan, Cable Kurwitz, Kun Cheng, Haozhi Bian (2016). Experimental Study of Helix-Finned Surface for Nucleate Pool Boiling.DOI
122. Cheng Wang, Changqi Yan, Jianjun Wang, Feifei Li (2016). Multi-Objective Optimization of Electric Heating Pressurizer in Nuclear Power Plant.DOI
123. Xiangcheng Wu, Changqi Yan, Zhaoming Meng, Kailun Chen, Shaochuang Song, Zonghao Yang, Jie Yu (2016). Numerical analysis of the passive heat removal system for molten salt reactor at steady state. Applied Thermal Engineering.DOI
124. Jiguo Tang, Changqi Yan, Licheng Sun, Guangyu Zhu (2016). EFFECTS OF A NONCONDENSABLE GAS ON THE MICROBUBBLE EMISSION BOILING. Heat Transfer Research.DOI
125. 阎昌琪，金光远，孙立成，王洋（2015）. 倾斜和摇摆状态下矩形通道内泡状流局部参数特性研究. 《原子能科学技术》.
126. 闫超星，阎昌琪，孙立成，田齐伟（2015）. 棒束通道内定位格架的两相流动局部阻力实验研究. 《原子能科学技术》.
127. 唐继国，阎昌琪，孙立成，侯晓凡（2015）. 含不凝性气体的蒸汽气泡凝结过程研究. 《原子能科学技术》.
128. 闫超星，阎昌琪，孙立成（2015）. 倾斜窄矩形通道内弹状流特性的实验研究. 《高校化学工程学报》.
129. 刘成洋，阎昌琪，王建军（2015）. 核电厂二回路热力系统的参数优化. 《核科学与工程》.
130. 王建军，孙立成，蔡报炜，张娜娜，阎昌琪（2015）. 钍基熔盐堆旋叶式气水分离器工作原理分析. 《核动力工程》.
131. 唐继国，阎昌琪，孙立成，朱光昱（2015）. 加热面边界条件对MEB形成过程的影响. 《哈尔滨工程大学学报》.
132. 唐继国，阎昌琪，孙立成（2015）. 超声波场中蒸汽气泡凝结过程及传热特性. 《化工学报》.
133. 唐继国，阎昌琪，孙立成，李亚，王开元（2015）. 蒸汽凝结过程声压波动信号实验研究. 《化工学报》.
134. 阎昌琪，金光远，孙立成，闫超星（2015）. 摇摆状态下矩形通道内弹状流压力模型. 《原子能科学技术》.
135. 唐继国，阎明，肖友军，阎昌琪，孙立成（2015）. 过冷度对蒸汽气泡破碎及微气泡喷射过程的影响. 《原子能科学技术》.
136. 田齐伟，阎昌琪，孙立成，闫超星（2015）. 棒束通道内两相流动摩擦阻力特性分析. 《原子能科学技术》.
137. 俞胜之，王建军，阎昌琪，郭雪晴，王忠乙（2015）. 事故后安全壳响应一维分析程序验证. 《第十四届全国反应堆热工流体学术会议暨中核核反应堆热工水力技术重点实验室2015年度学术年会论文集》.
138. 李贵敬，阎昌琪，王建军（2015）. 核动力装置主循环泵运行参数优化设计及惰转瞬态分析. 《动力工程学报》.
139. Jiguo Tang, Changqi Yan, Licheng Sun, Ya Li, Kaiyuan Wang (2015). Effect of liquid subcooling on acoustic characteristics during the condensation process of vapor bubbles in a subcooled pool. Nuclear Engineering and Design.DOI
140. Jiguo Tang, Changqi Yan, Licheng Sun (2015). Enhanced vapor bubble condensation and collapse with ultrasonic vibration. Experimental Thermal and Fluid Science.DOI
141. Jiguo Tang, Changqi Yan, Licheng Sun (2015). Feature of acoustic sound signals involved in vapor bubble condensation and its application in identification of condensation regimes. Chemical Engineering Science.DOI
142. Yang Wang, Changqi Yan, Dianchuan Xing, Guangyuan Jin, Licheng Sun, Guang Yang (2015). Slug flow in a vertical narrow rectangular channel – Laminar and turbulent regimes in the main flow and turbulent regime in the wake region of the Taylor bubble. Progress in Nuclear Energy.DOI
143. Jiguo Tang, Changqi Yan, Licheng Sun (2015). A study visualizing the collapse of vapor bubbles in a subcooled pool. International Journal of Heat and Mass Transfer.DOI
144. Chaoxing Yan, Jiayu Shen, Changqi Yan, Qiwei Tian, Guang Yang (2015). Resistance characteristics of air–water two-phase flow in a rolling 3×3 rod bundle. Experimental Thermal and Fluid Science.DOI
145. Xiangcheng Wu, Changqi Yan, Jiguo Tang, Xiaofan Hou, Hanying Chen, Huiqiang Xu (2015). ICONE23-1036 EXPERIMENTAL INVESTIGATION ON HEAT TRANSFER ENHANCEMENT OF A LAMINAR OIL FLOW IN AN ANNULAR TUBE WITH EXTRUDED FINS. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
146. Xiaoyi Liu, Yixuan Chen, Chengxin Cui, Changqi Yan (2015). ICONE23-1235 RESEARCH ON THE FLOW BEHAVIOR OF LIQUID FILM IN THE CORRUGATED-PLATE SEPARATOR. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
147. Jiguo Tang, Changqi Yan, Licheng Sun, Xiaofan Hou, Xiangcheng Wu, Huiqiang Xu, Hanying Chen (2015). ICONE23-1062 AN EXPERIMENTAL STUDY ON BUBBLE DYNAMIC BEHAVIOR IN MICROBUBBLE EMISSION BOILING. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
148. Congmin Zhang, Changqi Yan, Haifeng Gu, Jiguo Tang, Xiangcheng Wu (2015). ICONE23-1817 EXPERIMENTAL INVESTIGATION OF CRITICAL MASS FLOW RATE OF STEAM THROUGH ORIFICES. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
149. 刘晓一，田瑞峰，陈军亮，孙兰昕，阎昌琪（2014）. 波形板壁液膜破裂实验研究. 《核动力工程》.
150. 王佳卓，阎昌琪，丁铭，陈哲雨，石帅（2014）. 高压圆形板壳式换热器的设计与研究. 《核动力工程》.
151. 张娜娜，阎昌琪，孙立成，刘卫，李华（2014）. 熔盐堆除气系统中气泡分离器运行特性. 《核动力工程》.
152. 王洋，阎昌琪，孙立成，闫超星，田道贵（2014）. 窄矩形通道弹状流中液弹特性研究. 《核动力工程》.
153. 孙露，孙立成，阎昌琪，法丹，王纳秀（2014）. 熔盐堆非能动余热排出系统空气冷却与水冷却方案比较分析. 《核动力工程》.
154. 刘国强，孙立成，阎昌琪，田道贵（2014）. 管内向下气液两相流动界面参数分布特性. 《原子能科学技术》.
155. 蔡报炜，王建军，孙立成，张娜娜，阎昌琪（2014）. 熔盐堆旋叶式气水分离器工作特性数值分析. 《核技术》.
156. 陈磊，阎昌琪，王建军（2014）. 反应堆一回路多目标参数优化. 《核技术》.
157. 阎昌琪（2014）. 核反应堆工程. 《哈尔滨工程大学出版社》.
158. 唐继国，阎昌琪，孙立成，朱光昱（2014）. 气泡微细化沸腾过程中气泡冷凝破裂现象. 《化工学报》.
159. 闫超星，阎昌琪，孙立成，幸奠川，刘国强（2014）. 倾斜通道内泡状流空泡份额分布特性. 《化工学报》.
160. 王洋，阎昌琪，孙立成，闫超星，刘国强（2014）. 矩形通道弹状流液膜特性. 《哈尔滨工程大学学报》.
161. 闫超星，阎昌琪，孙立成，王洋，周艳民（2014）. 竖直窄矩形通道内弹状流特性的实验研究. 《哈尔滨工程大学学报》.
162. 幸奠川，阎昌琪，孙立成（2014）. 摇摆对单相强迫循环流量波动特性的影响机理. 《哈尔滨工程大学学报》.
163. 闫超星，阎昌琪，孙立成，幸奠川，王洋（2014）. 倾斜、摇摆对矩形通道内泡状流局部界面参数分布的影响. 《核动力工程》.
164. 阎昌琪，陈磊，王建军（2014）. 混合距离算法在蒸汽发生器优化设计中的应用. 《哈尔滨工程大学学报》.
165. 陈磊，阎昌琪，王建军（2014）. 蒸汽发生器多目标优化设计. 《哈尔滨工程大学学报》.
166. 张娜娜，阎昌琪，孙立成，蔡报炜（2014）. 熔盐堆中气泡分离器内部流场的数值模拟. 《原子能科学技术》.
167. 陈磊，阎昌琪，王建军（2014）. 反应堆一回路系统优化设计方案的可行性验证. 《原子能科学技术》.
168. 刘国强，孙立成，阎昌琪，幸奠川，田道贵（2014）. 竖直圆管内泡状流界面参数分布特性. 《原子能科学技术》.
169. 闫超星，阎昌琪，孙立成，王洋，张小宁（2014）. 竖直小通道内弹状流气弹长度的计算模型. 《原子能科学技术》.
170. 刘晓一，田瑞峰，黄亚军，孙兰昕，阎昌琪（2014）. 丝网分离器水滴撞击水膜的机理研究. 《原子能科学技术》.
171. 唐文偲，阎昌琪，孙立成，刘卫，李华（2014）. 文丘里式气泡发生器气泡碎化特性研究. 《原子能科学技术》.
172. 阎昌琪，李贵敬，王建军（2014）. 群体复合形优化算法在核动力设备优化设计中的应用. 《原子能科学技术》.
173. 王洋，阎昌琪，孙立成，金光远，闫超星（2014）. 竖直窄矩形通道内弹状流中液膜特性研究. 《原子能科学技术》.
174. 居晓峰，孙立成，唐文偲，运红宇，阎昌琪（2014）. 文丘里式气泡发生器工作特性分析. 《核技术》.
175. 王升飞，阎昌琪，闫修平，玉宇，牛风雷（2014）. 密度锁内分区模型研究. 《北京核学会第十届（2014年）核应用技术学术交流会》.
176. 刘国强，孙立成，阎昌琪，田道贵（2014）. 倾斜圆管内空泡份额径向分布及形成机制. 《航空动力学报》.
177. Hangbin Zhao, Changqi Yan, Licheng Sun, Kaibin Zhao, Dan Fa (2014). Design of a natural draft air-cooled condenser and its heat transfer characteristics in the passive residual heat removal system for 10 MW molten salt reactor experiment. Applied Thermal Engineering.DOI
178. Jiguo Tang, Changqi Yan, Licheng Sun (2014). Effects of noncondensable gas and ultrasonic vibration on vapor bubble condensing and collapsing. Experimental Thermal and Fluid Science.DOI
179. Chaoxing Yan, Xiaxin Cao, Changqi Yan, Licheng Sun, Qiwei Tian (2014). Effects of rolling on resistance characteristics of single-phase flow in a 3 × 3 rod bundle. Progress in Nuclear Energy.DOI
180. Daogui Tian, Changqi Yan, Licheng Sun (2014). Model of bubble velocity vector measurement in upward and downward bubbly two-phase flows using a four-sensor optical probe. Progress in Nuclear Energy.DOI
181. Daogui Tian, Changqi Yan, Licheng Sun (2014). Evaluation of interfacial area transport equation in vertical bubbly two-phase flow in large diameter pipes. Annals of Nuclear Energy.DOI
182. Guangyuan Jin, Changqi Yan, Licheng Sun, Yang Wang, Chaoxing Yan (2014). Research on frictional resistance of bubbly flow in rolling rectangular ducts. Nuclear Engineering and Design.DOI
183. Guijing Li, Changqi Yan, Jianjun Wang (2014). Optimization of a moisture separator reheater. Annals of Nuclear Energy.DOI
184. Yang Wang, Changqi Yan, Xiaxin Cao, Licheng Sun, Chaoxing Yan, Qiwei Tian (2014). Hydrodynamics of slug flow in a vertical narrow rectangular channel under laminar flow condition. Annals of Nuclear Energy.DOI
185. Daogui Tian, Changqi Yan, Licheng Sun, Pan Tong, Guoqiang Liu (2014). Comparison of local interfacial characteristics between vertical upward and downward two-phase flows using a four-sensor optical probe. International Journal of Heat and Mass Transfer.DOI
186. Cheng Wang, Changqi Yan, Jianjun Wang, Lei Chen, Gui-jing Li (2014). Application of Dual-Adaptive Niched Genetic Algorithm in Optimal Design of Nuclear Power Components.DOI
187. Majid Ali, Changqi Yan, Haifeng Gu, Khurram Mehboob, Athar Rasool (2014). Removal Efficiency of Iodine at Saturated Steam in Submerged Venturi Scrubber.DOI
188. Jianjun Wang, Zengfang Ge, Zhongning Sun, Changqi Yan (2014). The Surge Line Stress Analysis Model Setup With the Consideration of Thermal Stratification.DOI
189. Yang Wang, Changqi Yan, Licheng Sun, Chaoxing Yan, Yanmin Zhou, Jiqiang Su (2014). Two-Phase Slug Flow in a Narrow Rectangular Channel Under Inclined Conditions.DOI
190. Chaoxing Yan, Changqi Yan, Licheng Sun, Yang Wang (2014). Experimental Study on Resistance Characteristics in a 3 × 3 Rod Bundle.DOI
191. Chaoxing Yan, Chaoxing Yan, Changqi Yan, Changqi Yan, Licheng Sun, Qiwei Tian (2014). Experimental and theoretical analysis of bubble rising velocity in a 3×3 rolling rod bundle under stagnant condition. Annals of Nuclear Energy.DOI
192. Yang Wang, Changqi Yan, Changqi Yan, Licheng Sun, Chaoxing Yan, Chaoxing Yan, Qiwei Tian (2014). Characteristics of slug flow in a narrow rectangular channel under inclined conditions. Progress in Nuclear Energy.DOI
193. Chaoxing Yan, Chaoxing Yan, Changqi Yan, Changqi Yan, Yunhai Shen, Licheng Sun, Yang Wang (2014). Evaluation analysis of correlations for predicting the void fraction and slug velocity of slug flow in an inclined narrow rectangular duct. Nuclear Engineering and Design.DOI
194. Dianchuan Xing, Changqi Yan, Licheng Sun (2014). Flow fluctuation behaviors of single-phase forced circulation under rolling conditions. Ocean Engineering.DOI
195. Chaoxing Yan, Changqi Yan, Licheng Sun, Qiwei Tian, Yang Wang (2014). Air–water two-phase flow in a rolling 3×3 rod bundle under stagnant condition. Experimental Thermal and Fluid Science.DOI
196. Dianchuan Xing, Changqi Yan, Jianjun Xu, L.J. Liang, Yuanfeng Zan (2014). A theoretical analysis about the mechanism of the effect of rolling motion on single-phase flow resistance in rectangular duct. Progress in Nuclear Energy.DOI
197. Baowei Cai, Jianjun Wang, Licheng Sun, Nana Zhang, Changqi Yan (2014). Experimental study and numerical optimization on a vane-type separator for bubble separation in TMSR. Progress in Nuclear Energy.DOI
198. Chaoxing Yan, Changqi Yan, Licheng Sun, Dianchuan Xing, Yang Wang (2014). Investigation of the interfacial parameter distribution in a bubbly flow in a narrow rectangular channel under inclined and rolling conditions. Progress in Nuclear Energy.DOI
199. Lei Chen, Changqi Yan, Jianjun Wang, Chengyang Liu (2014). Weight optimal design of the primary coolant system for a pressurized water reactor. Annals of Nuclear Energy.DOI
200. Daogui Tian, Changqi Yan, Licheng Sun, Guoqiang Liu (2014). Local interfacial parameter distribution for two-phase flow under rolling conditions using a four-sensor optical probe. Annals of Nuclear Energy.DOI
201. Lei Chen, Changqi Yan, Jianjun Wang (2014). Multi-objective optimal design for the coolant system of a pressurized power reactor and its validation by the RELAP5/MOD3.2 code. Progress in Nuclear Energy.DOI
202. Jianjun Wang, Xueqing Guo, Shengzhi Yu, Baowei Cai, Zhongning Sun, Changqi Yan (2014). Study on the Behaviors of a Conceptual Passive Containment Cooling System. Science and Technology of Nuclear Installations.DOI
203. 闫超星，阎昌琪，孙立成（2013）. 周期性力场作用下气泡径向附加力分析. 《原子能科学技术》.
204. 李大鹏，姚世卫，阎昌琪（2013）. 潜艇热隐蔽性及“弗吉尼亚”级热特征研究. 《哈尔滨工程大学学报》.
205. 幸奠川，阎昌琪，王畅，曹夏昕，孙立成（2013）. 摇摆对单相强制循环层流阻力特性的影响. 《哈尔滨工程大学学报》.
206. 田道贵，阎昌琪，孙立成（2013）. 四传感器光纤探针测量气泡速度矢量模型. 《化工学报》.
207. 幸奠川，阎昌琪，孙立成，侯大文（2013）. 倾斜对管内上升泡状流局部界面参数分布的影响. 《化工学报》.
208. 金光远，阎昌琪，孙立成，幸奠川，孙波（2013）. 周期惯性力影响下矩形通道泡状流阻力特性. 《化工学报》.
209. 王洋，阎昌琪，孙立成，幸奠川，闫超星（2013）. 竖直窄矩形通道内空气-水两相流中气弹运动速度研究. 《原子能科学技术》.
210. 陈磊，阎昌琪，王建军（2013）. 一种改进的稳压器优化设计及其瞬态特性. 《原子能科学技术》.
211. 闫超星，阎昌琪，孙立成，王洋（2013）. 基于漂移流模型的矩形通道内泡状流-弹状流转变准则. 《原子能科学技术》.
212. 王洋，阎昌琪，孙立成，金光远，闫超星（2013）. 矩形通道内气水两相流摩擦阻力计算模型. 《原子能科学技术》.
213. 金光远，阎昌琪，孙立成，幸奠川，刘磊（2013）. 摇摆条件下窄矩形通道内两相流动瞬态阻力特性研究. 《原子能科学技术》.
214. 陈磊，阎昌琪，王建军（2013）. 蒸汽发生器优化设计后的运行特性研究. 《原子能科学技术》.
215. 石帅，阎昌琪，丁铭（2013）. 针翅管滑油冷却器壳侧传热与阻力性能实验研究. 《原子能科学技术》.
216. 李贵敬，阎昌琪，王建军，刘成洋（2013）. 屏蔽电机有效材料重量的优化设计. 《原子能科学技术》.
217. 李贵敬，阎昌琪，王建军，刘成洋（2013）. 映射交叉遗传算法在核动力设备优化设计中的应用. 《原子能科学技术》.
218. 金光远，阎昌琪，孙立成，王广飞（2013）. 矩形通道内两相流动阻力特性及计算方法. 《原子能科学技术》.
219. 幸奠川，阎昌琪，孙立成，刘靖宇（2013）. 倾斜管内上升泡状流界面参数分布特性实验研究. 《原子能科学技术》.
220. 刘传成，阎昌琪，孙立成，幸奠川，王鑫（2013）. 摇摆运动下矩形窄通道内摩擦压降特性研究. 《原子能科学技术》.
221. 刘成洋，阎昌琪，王建军，刘振海（2013）. 核动力二回路系统优化设计. 《原子能科学技术》.
222. 陈磊，阎昌琪，王建军，刘成洋（2013）. 核动力设备耦合优化设计研究. 《原子能科学技术》.
223. 谷海峰，阎昌琪，陈薇（2013）. 密度锁自平衡启动特性的实验研究. 《原子能科学技术》.
224. 幸奠川，孙立成，阎昌琪，田道贵（2013）. 竖直圆管内泡状流空泡份额径向分布实验研究. 《原子能科学技术》.
225. 幸奠川，阎昌琪，曹夏昕，刘传成，孙波（2013）. 高宽比对矩形窄通道内单相水流动特性的影响机理. 《原子能科学技术》.
226. 石帅，阎昌琪，丁铭，陈哲雨（2013）. 针翅套管双侧强迫对流换热实验研究. 《哈尔滨工程大学学报》.
227. 金光远，阎昌琪，孙立成，幸奠川，刘靖宇（2013）. 摇摆运动时窄矩形通道内两相流动阻力特性实验研究. 《哈尔滨工程大学学报》.
228. 王洋，阎昌琪，孙立成，闫超星，幸奠川（2013）. 倾斜窄矩形通道中气弹运动速度. 《化工学报》.
229. 法丹，阎昌琪，孙立成，孙露，赵行斌（2013）. 熔盐堆水冷却非能动余热排出系统换热器稳态特性研究. 《核技术》.
230. 闫超星，阎昌琪，孙立成，幸奠川，王洋（2013）. 矩形通道高宽比对两相流动阻力和流型关系的影响. 《原子能科学技术》.
231. 李贵敬，阎昌琪，王建军（2013）. 屏蔽电机设计性能的参数效应分析. 《原子能科学技术》.
232. 田道贵，孙立成，阎昌琪，刘国强（2013）. 两相流动中摇摆引起的附加作用分析. 《核动力工程》.
233. 孙露，孙立成，阎昌琪，法丹，赵行斌（2013）. 10MW熔盐堆非能动余热排出系统概念设计. 《核动力工程》.
234. 王洋，阎昌琪，孙立成，闫超星，幸奠川（2013）. 矩形通道内泡状流-弹状流转变判定准则研究. 《核动力工程》.
235. 田道贵，孙立成，阎昌琪，刘国强（2013）. 摇摆状态下两相流动局部参数光学探针测量实验. 《核动力工程》.
236. 幸奠川，阎昌琪，孙立成，金光远，王广飞（2013）. 矩形小通道内空气-水两相流动均相流模型研究. 《核动力工程》.
237. 陈哲雨，阎昌琪，丁铭，石帅（2013）. 一种紧凑布置滑油冷却器的强化传热特性实验研究. 《中国核学会2013年学术年会》.
238. 李贵敬，阎昌琪，王建军（2013）. 核动力主循环泵优化设计研究. 《中国核学会2013年学术年会》.
239. 陈磊，阎昌琪，王建军（2013）. 中压受热通道密度波不稳定性研究. 《动力工程学报》.
240. 栾锋，阎昌琪，郦文忠（2013）. 摇摆对水平管内单相水阻力特性的影响分析. 《实验流体力学》.
241. 幸奠川，阎昌琪，孙立成，闫超星，金光远（2013）. 简谐摇摆运动下窄通道内空气-水两相流摩擦阻力. 《实验流体力学》.
242. 李贵敬，阎昌琪，王建军（2013）. 核动力主循环泵优化设计及启动瞬态分析. 《船舶工程》.
243. 幸奠川，阎昌琪，王畅，孙立成（2013）. 矩形通道高宽比对单相层流特性的影响. 《力学学报》.
244. Chaoxing Yan, Changqi Yan, Licheng Sun, Dianchuan Xing, Yang Wang, Daogui Tian (2013). Flow regimes of adiabatic gas-liquid two-phase under rolling conditions. AIP conference proceedings.DOI
245. Daogui Tian, Licheng Sun, Changqi Yan, Jingyu Liu, Bo Sun (2013). Effect of rolling motion on local characteristics of gas-liquid two-phase flow using an optical probe. AIP conference proceedings.DOI
246. Guangyuan Jin, Changqi Yan, Licheng Sun, Dianchuan Xing, Bao Shun Zhou (2013). Void fraction of dispersed bubbly flow in a narrow rectangular channel under rolling conditions. Progress in Nuclear Energy.DOI
247. Lu Sun, Licheng Sun, Changqi Yan, Dan Fa, Na-Xiu Wang (2013). Conceptual design and analysis of a passive residual heat removal system for a 10 MW molten salt reactor experiment. Progress in Nuclear Energy.DOI
248. Guangyuan Jin, Changqi Yan, Licheng Sun, Dianchuan Xing (2013). Effect of rolling motion on transient flow resistance of two-phase flow in a narrow rectangular duct. Annals of Nuclear Energy.DOI
249. Yang Wang, Changqi Yan, Changqi Yan, Licheng Sun, Chaoxing Yan, Chaoxing Yan (2013). Characteristics of slug flow in a vertical narrow rectangular channel. Experimental Thermal and Fluid Science.DOI
250. Chaoxing Yan, Changqi Yan, Licheng Sun, Yang Wang, Xiaoning Zhang (2013). Slug behavior and pressure drop of adiabatic slug flow in a narrow rectangular duct under inclined conditions. Annals of Nuclear Energy.DOI
251. Dianchuan Xing, Changqi Yan, MA Xin-guang, Licheng Sun (2013). Effects of void fraction correlations on pressure gradient separation of air–water two-phase flow in vertical mini rectangular ducts. Progress in Nuclear Energy.DOI
252. Nana Zhang, Changqi Yan, Licheng Sun (2013). Experimental Study of a Gas Separator for MSR Gas Removal System. Volume 2: Plant Systems, Construction, Structures and Components; Next Generation Reactors and Advanced Reactors.DOI
253. Chaoxing Yan, Changqi Yan, Licheng Sun, Yang Wang, Daogui Tian, Guangyuan Jin (2013). Experimental Investigation on Bubbly Flow in Rectangular Channel Under Rolling Condition.DOI
254. Lei Chen, Changqi Yan, Jianjun Wang (2013). Investigation on Multi-Objective Optimal Design of a Two Pass Condenser.DOI
255. Yang Wang, Changqi Yan, Licheng Sun, Chaoxing Yan, Dianchuan Xing, Daogui Tian, Guangyuan Jin (2013). Study on the Characteristics in the Liquid Slug of Rising Slug Flow in Narrow Rectangular Channel.DOI
256. Lei Chen, Changqi Yan, Jianjun Wang (2013). Multi-objective optimal design of vertical natural circulation steam generator. Progress in Nuclear Energy.DOI
257. Majid Ali, Changqi Yan, Zhongning Sun, Haifeng Gu, Junlong Wang (2013). Study of iodine removal efficiency in self-priming venturi scrubber. Annals of Nuclear Energy.DOI
258. Dianchuan Xing, Changqi Yan, Changjiang Wang, Licheng Sun (2013). A theoretical analysis about the effect of aspect ratio on single-phase laminar flow in rectangular ducts. Progress in Nuclear Energy.DOI
259. Dianchuan Xing, Changqi Yan, Licheng Sun, Jingyu Liu, Bo Sun (2013). Experimental study of interfacial parameter distributions in upward bubbly flow under vertical and inclined conditions. Experimental Thermal and Fluid Science.DOI
260. Majid Ali, Changqi Yan, Zhongning Sun, Jianjun Wang, Haifeng Gu (2013). CFD simulation of dust particle removal efficiency of a venturi scrubber in CFX. Nuclear Engineering and Design.DOI
261. Guangyuan Jin, Changqi Yan, Licheng Sun (2013). Research on transient flow resistance of two-phase in narrow rectangular channel under rolling motions. AIP conference proceedings.DOI
262. Dianchuan Xing, Changqi Yan, Licheng Sun, Yang Wang (2013). Experimental investigations of single-phase and two-phase flow resistance in narrow rectangular duct under rolling condition. AIP conference proceedings.DOI
263. Yang Wang, Changqi Yan, Licheng Sun, Dianchuan Xing, Chaoxing Yan, Daogui Tian (2013). Characteristics of slug flow in narrow rectangular channels under vertical condition. AIP conference proceedings.DOI
264. 幸奠川，孙立成，阎昌琪，王鑫，孙波（2012）. 倾斜圆管内泡状流空泡份额特性实验研究. 《核动力工程》.
265. 闫超星，阎昌琪，孙立成，王洋（2012）. 通道尺寸对竖直向上气-水两相流流型影响实验研究. 《原子能科学技术》.
266. 刘成洋，阎昌琪，王建军，刘振海（2012）. 粒子群遗传算法及其应用. 《核动力工程》.
267. 谢清清，阎昌琪，曹夏昕，黄彦平，马建，王广飞（2012）. 摇摆状态下窄通道内单相阻力特性实验研究. 《原子能科学技术》.
268. 孙露，孙立成，阎昌琪（2012）. ORNL 10MW熔盐实验堆(MSRE)排盐罐冷却系统热工水力特性分析. 《核技术》.
269. 刘成洋，阎昌琪，王建军（2012）. 基于改进遗传算法的冷凝器优化设计. 《原子能科学技术》.
270. 幸奠川，阎昌琪，曹夏昕，金光远（2012）. 摇摆对矩形窄通道内单相水流动特性的影响. 《核动力工程》.
271. 李常伟，曹夏昕，孙立成，阎昌琪（2012）. 竖直窄矩形通道气液两相流流型识别研究. 《原子能科学技术》.
272. 石帅，阎昌琪，牛广林，陈哲雨（2012）. 针翅管传热与压降特性研究. 《原子能科学技术》.
273. 刘成洋，阎昌琪，王建军，陈磊（2012）. 核动力一回路系统双目标优化设计. 《原子能科学技术》.
274. 刘传成，阎昌琪，孙立成（2012）. 摇摆运动下矩形窄通道内流动沸腾阻力特性. 《原子能科学技术》.
275. 刘成洋，阎昌琪，王建军（2012）. 船舶汽轮机优化设计. 《原子能科学技术》.
276. 阎昌琪，幸奠川，曹夏昕，谢清清（2012）. 摇摆条件下窄通道内单相水流态转捩特性. 《哈尔滨工程大学学报》.
277. 谷海峰，阎昌琪，陈薇（2012）. 密度锁正向启动特性的实验研究. 《哈尔滨工程大学学报》.
278. 牛广林，阎昌琪，孟兆明，石帅（2012）. 滑油冷却器在不同布置方式下换热特性的实验研究. 《原子能科学技术》.
279. 谢清清，阎昌琪，曹夏昕，黄彦平，王广飞，刘晓钟（2012）. 窄矩形通道内单相水阻力特性实验研究. 《原子能科学技术》.
280. 阎昌琪，刘成洋，王建军（2012）. 新型混合粒子群算法在核动力设备优化设计中的应用. 《哈尔滨工程大学学报》.
281. 李勇，阎昌琪，李汶蔚，孙立成（2012）. 竖直管内蒸汽完全冷凝换热特性的理论研究. 《原子能科学技术》.
282. 张往锁，曹夏昕，阎昌琪，陈薇（2012）. 辅助给水系统对缓解全厂断电事故能力研究. 《原子能科学技术》.
283. 张楠，孙中宁，阎昌琪（2012）. 三维随机填充球床通道内流场数值分析. 《原子能科学技术》.
284. 刘成洋，阎昌琪，王建军（2012）. 基于混合遗传算法的稳压器优化设计. 《原子能科学技术》.
285. 刘传成，阎昌琪，孙立成，陈炳德，幸奠川（2012）. 矩形窄通道内流动沸腾阻力实验与计算方法研究. 《原子能科学技术》.
286. 金光远，阎昌琪，孙立成，刘磊（2012）. 摇摆条件对矩形通道内泡状流摩阻特性影响. 《第八届(2012年)北京核学会核应用技术学术交流会》.
287. 幸奠川，阎昌琪，孙立成，金光远，王洋（2012）. 周期性力场作用下窄通道内两相流压降特性. 《第八届(2012年)北京核学会核应用技术学术交流会》.
288. 陈薇，张亚男，曹夏昕，阎昌琪，张往锁（2012）. 二次侧非能动余热排出系统设计及验证分析. 《中国核电》.
289. 贺士晶，阎昌琪，孙中宁，刘曙光（2012）. 强化换热扁管结构最优化分析. 《中南大学学报(自然科学版)》.
290. 幸奠川，阎昌琪，刘传成，刘宇生（2012）. 摇摆对窄通道内单相流摩擦阻力的影响研究. 《实验流体力学》.
291. Majid Ali, Changqi Yan, Zhongning Sun, Haifeng Gu, Khurram Mehboob (2012). Dust particle removal efficiency of a venturi scrubber. Annals of Nuclear Energy.DOI
292. Dianchuan Xing, Changqi Yan, Licheng Sun, Changjiang Wang (2012). Effect of rolling motion on single-phase laminar flow resistance of forced circulation with different pump head. Annals of Nuclear Energy.DOI
293. Dianchuan Xing, Changqi Yan, Licheng Sun, Guangyuan Jin, Sichao Tan (2012). Frictional resistance of adiabatic two-phase flow in narrow rectangular duct under rolling conditions. Annals of Nuclear Energy.DOI
294. Chengyang Liu, Changqi Yan, Jianjun Wang (2012). Optimal design of vertical natural circulation steam generator. Nuclear Engineering and Design.DOI
295. Dianchuan Xing, Changqi Yan, Licheng Sun, Chao Xu (2012). Effects of rolling on characteristics of single-phase water flow in narrow rectangular ducts. Nuclear Engineering and Design.DOI
296. Xiang-bo Lv, Changqi Yan, Gui-jing Li, Wang Jian-jun (2012). Optimization Design of the Weight of Reactor Coolant Pump. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
297. Xiang-bo Lv, Changqi Yan, Haifeng Gu (2012). Experimental Study of Density Lock in Passive Residual Heat Removal System. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
298. Majid Ali, Changqi Yan, Zhongning Sun, Hai Feng Gu, Meng Wang (2012). Study of Pressure Drop Model for Self-Priming Venturi Scrubber. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
299. Guang-lin Niu, Changqi Yan (2012). Experimental Study on Heat Transfer Characteristics of Lubricating-Oil Cooler with Mixing Integral Pin-Fin Bundles. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
300. Changqi Yan (2012). Thermal-hydraulic analysis of bayonet cooling thimble in fuel drain tank of ORNL 10MW MSRE. Nuclear Techniques.
301. Changqi Yan (2012). Identification and Study of Flow Patterns in Narrow Vertical Rectangular Channel. Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms.
302. Dianchuan Xing, Licheng Sun, Changqi Yan (2012). Study on characteristics of void fraction under rolling condition and inclined state for bubble flow.
303. 陈薇，王少武，阎昌琪，谷海峰（2011）. 密度锁反向启动特性实验研究. 《工程热物理学报》.
304. 刘成洋，阎昌琪，王建军（2011）. 核电站冷凝器优化设计. 《动力工程学报》.
305. 贾辉，谭思超，高璞珍，阎昌琪，黄彦平（2011）. 简谐脉动流中极点摩擦压降特性实验研究. 《核动力工程》.
306. 王广飞，阎昌琪，孙立成，谢清清，贾辉（2011）. 窄矩形通道内两相流动压降特性研究. 《原子能科学技术》.
307. 秦慧敏，阎昌琪，王建军，王盟，贺士晶（2011）. 立式自然循环蒸汽发生器的重量优化设计. 《原子能科学技术》.
308. 李贵敬，阎昌琪，王建军，贺士晶（2011）. 主循环泵重量和体积的优化设计. 《原子能科学技术》.
309. 郑静，阎昌琪，王建军（2011）. 核动力装置冷凝器体积的优化设计. 《原子能科学技术》.
310. 陈薇，阎昌琪，谷海峰（2011）. 密度锁启动特性实验研究及计算验证. 《原子能科学技术》.
311. 秦慧敏，阎昌琪，王建军（2011）. 反应堆一回路装置的重量优化设计. 《原子能科学技术》.
312. 陈薇，严春，阎昌琪，谷海峰（2011）. 基于密度锁的非能动余热排出系统设计及验证分析. 《原子能科学技术》.
313. 幸奠川，阎昌琪，曹夏昕，刘洋，高璞珍（2011）. 摇摆条件下单相水强制循环阻力特性实验研究. 《原子能科学技术》.
314. 郑静，阎昌琪，王建军（2011）. 基于复合-遗传算法的汽轮机组初步优化设计. 《原子能科学技术》.
315. 李勇，阎昌琪，孙福荣，孙立成（2011）. 非能动余热排出换热器运行初始阶段换热特性研究. 《原子能科学技术》.
316. 牛广林，阎昌琪，孙中宁，石帅，南金秋（2011）. 整体针翅管混合管束滑油冷却器传热特性对比实验研究. 《核科学与工程》.
317. 王广飞，阎昌琪，曹夏昕，谢清清（2011）. 摇摆状态下窄矩形通道内两相流流型特性研究. 《原子能科学技术》.
318. 孙福荣，阎昌琪，谷海峰（2011）. 密度锁工作特性的实验研究. 《原子能科学技术》.
319. 贾辉，谭思超，高璞珍，阎昌琪（2011）. 不稳定条件下水平管单相水流动阻力特性实验研究. 《原子能科学技术》.
320. 阎昌琪，郑静，王建军（2011）. 功率双分支传动两级齿轮减速器的优化设计. 《哈尔滨工程大学学报》.
321. 孙立成，阎昌琪，曹夏昕（2011）. 竖直环形流道内流动沸腾传热研究. 《哈尔滨工程大学学报》.
322. 幸奠川，阎昌琪，曹夏昕，刘宇生，谢清清（2011）. 矩形窄缝通道内单相水流动特性研究. 《原子能科学技术》.
323. 秦慧敏，阎昌琪，王建军（2011）. 反应堆一回路装置的容积优化设计. 《核动力工程》.
324. 郑静，阎昌琪，王建军（2011）. 冷凝器重量优化设计. 《核动力工程》.
325. 陈薇，阎昌琪，谷海峰（2011）. 基于PID控制的密度锁启动方案计算验证. 《核动力工程》.
326. 李勇，阎昌琪，孙立成，刘佳（2011）. 多孔壁面管强化大容积沸腾换热特性研究. 《核动力工程》.
327. 王升飞，阎昌琪，谷海峰（2011）. 密度锁栅格结构对分层稳定特性影响. 《核动力工程》.
328. 王盟，王建军，孙中宁，贺士晶，阎昌琪（2011）. 蒸汽发生器最优化设计. 《核动力工程》.
329. 幸奠川，阎昌琪，刘洋，高璞珍（2011）. 摇摆条件下矩形通道内单相水强制循环流动特性研究. 《核动力工程》.
330. 幸奠川，孙立成，阎昌琪（2011）. 倾斜、摇摆条件下泡状流空泡份额特性研究. 《中国核科学技术进展报告（第二卷）——中国核学会2011年学术年会论文集第3册（核能动力分卷（下））》.
331. 刘成洋，阎昌琪，王建军（2011）. 船舶汽轮机组优化设计研究. 《船舶工程》.
332. Shuai Shi, Changqi Yan, Guang-lin Niu (2011). Numerical Study of Heat Transfer and Pressure Drop of Integral Pin-Fin Tubes. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
333. Shuai Shi, Guang-lin Niu, Changqi Yan, Wang Lei (2011). Research and Comparison of Heat Transfer and Pressure Drop in Lubricant Cooler. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
334. Guang-lin Niu, Changqi Yan, Shuai Shi (2011). Experimental Study of Heat Transfer Enhancement of Lubricating-Oil Cooler with Integral Pin-Fin Tube. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
335. Changqi Yan (2011). Optimum Design of Steam Generator. Hedongli gongcheng.
336. Changqi Yan (2011). Experimental Study on Horizontal Single Phase Water Flow Resistance Characteristics Under Unsteady Flow Condition. Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms.
337. 阎昌琪（2010）. 核电专业英语. 《中国电力出版社》.
338. 阎昌琪（2010）. 核反应堆安全传热. 《哈尔滨工程大学出版社》.
339. 贺士晶，阎昌琪，孙中宁，范广铭（2010）. 扁管壁面温度分布实验研究. 《核动力工程》.
340. 孙立成，阎昌琪，孙中宁（2010）. 小通道内两相流摩擦压降计算方法评价. 《核动力工程》.
341. 贺士晶，阎昌琪，王建军，王盟（2010）. 稳压器容积的优化设计. 《原子能科学技术》.
342. 严春，王建军，阎昌琪（2010）. 非能动余热排出系统的稳态特性研究. 《原子能科学技术》.
343. 于凯秋，孙立成，阎昌琪（2010）. “Chen”型沸腾传热计算方法用于小通道传热计算的适应性. 《核动力工程》.
344. 严春，王建军，阎昌琪（2010）. 二次侧非能动余热排出系统瞬态分析. 《核动力工程》.
345. 牛广林，阎昌琪，孙中宁，石帅，王镭（2010）. 整体针翅管混合管束滑油冷却器强化换热试验研究. 《核科学与工程》.
346. 陈薇，阎昌琪，谷海峰，张楠（2010）. 基于密度锁的非能动余热排出系统特性分析. 《核动力工程》.
347. 于沛，阎昌琪，谷海峰（2010）. 密度锁内分层界面的作用分析. 《核动力工程》.
348. 王升飞，阎昌琪，谷海峰，方红宇（2010）. 密度锁内流体稳态传热模型的建立. 《原子能科学技术》.
349. 郑静，阎昌琪，王建军（2010）. 基于复合—遗传算法斜齿轮减速器优化设计. 《计算》.
350. 李勇，阎昌琪，孙立成，刘佳（2010）. 自然循环条件下竖直管内层流凝结换热特性研究. 《核动力工程》.
351. 于沛，阎昌琪，谷海峰（2010）. 密度锁内流体分层界面下移情况的相关研究. 《核动力工程》.
352. 贺士晶，阎昌琪，王建军，王盟（2010）. 核动力设备优化设计研究. 《原子能科学技术》.
353. 王升飞，阎昌琪，谷海峰，方红宇（2010）. 竖直振荡对密度锁内温度场影响的实验研究. 《核动力工程》.
354. 于沛，阎昌琪，谷海峰，陈薇（2010）. 密度锁内无扰动时稳态温度场分析. 《核动力工程》.
355. 贺士晶，阎昌琪，王建军，王盟（2010）. 复合形-遗传算法在核动力设备优化设计中的应用研究. 《核动力工程》.
356. 于沛，路海晋，阎昌琪（2010）. 密度锁内分层界面位置的实验研究及分析. 《核动力工程》.
357. 王升飞，阎昌琪，谷海峰，于沛（2010）. 小通道振荡导致密度锁失效研究. 《核动力工程》.
358. 贾辉，谭思超，高璞珍，阎昌琪（2010）. 摇摆引起的波动对单相自然循环换热的影响. 《核动力工程》.
359. Guang-lin Niu, Changqi Yan, Shuai Shi (2010). Notice of Retraction: Research on Heat Transfer Enhancement of Lubricating-Oil Cooler with Mixing Integral Pin-Fin Tubes and Plain Tubes. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
360. Changqi Yan (2010). Effect of Fluctuation Caused by Rolling Motion on Single-Phase Natural Circulation Heat Transfer. Hedongli gongcheng.
361. Changqi Yan (2010). Transient Analysis of Secondary-Side Passive Residual Heat Removal System. Hedongli gongcheng.
362. Pei Yu, Lu Haijin, Changqi Yan (2010). Experimental Research and Analysis on Location of Stratified Interface in Density Lock. Hedongli gongcheng.
363. Hui-min Qin, Changqi Yan, Meng Wang, HE Shi-jing (2010). Investigations on Optimal Design of a U-Tube Steam Generator. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
364. Changqi Yan (2010). Steady-State Behavior of Passive Residual Heat Removal System. Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms.
365. Changqi Yan (2010). Applicability of "Chen" Type Methods for Predicting Boiling Heat Transfer in Mini-Channels. Hedongli gongcheng.
366. 王升飞，阎昌琪，谷海峰（2009）. 密度锁机理研究. 《中国核科学技术进展报告——中国核学会2009年学术年会论文集（第一卷·第3册）》.
367. 严春，阎昌琪（2009）. 用RELAP5程序对非能动余热排出系统的瞬态分析. 《中国核科学技术进展报告——中国核学会2009年学术年会论文集（第一卷·第3册）》.
368. 刘佳，阎昌琪，李勇（2009）. 竖直管束大容积沸腾传热的研究. 《中国核科学技术进展报告——中国核学会2009年学术年会论文集（第一卷·第3册）》.
369. 陈薇，阎昌琪，谷海峰（2009）. 非能动余热排出回路启动特性分析. 《中国核科学技术进展报告——中国核学会2009年学术年会论文集（第一卷·第3册）》.
370. 于沛，阎昌琪，谷海峰（2009）. 密度锁界面层内波动初探. 《中国核科学技术进展报告——中国核学会2009年学术年会论文集（第一卷·第3册）》.
371. 谷海峰，阎昌琪，王升飞（2009）. 密度锁内稳态分层特性的实验研究. 《原子能科学技术》.
372. 曲行丽，阎昌琪，范广铭（2009）. 微肋管单相对流强化换热数值模拟. 《计算》.
373. 孙福荣，阎昌琪，谷海峰（2009）. 影响密度锁内热-冷流体分界面因素的实验研究. 《计算》.
374. 牛广林，付明玉，阎昌琪，南景富（2009）. 套管式直流蒸发器的建模及仿真. 《核科学与工程》.
375. 王镭，阎昌琪（2009）. 滑油冷却器小型化研究. 《计算》.
376. 严春，阎昌琪（2009）. 非能动余热排出系统瞬态特性分析. 《计算》.
377. 谷海峰，阎昌琪，王升飞，孙福荣（2009）. 密度锁内水力平衡建立方法的实验研究. 《哈尔滨工程大学学报》.
378. 谷海峰，阎昌琪，孙福荣（2009）. 密度锁内水力平衡特性分析和实验研究. 《核动力工程》.
379. 贺士晶，孙中宁，阎昌琪，范广铭（2009）. 扁管传热与阻力特性的实验研究. 《核动力工程》.
380. 李勇，阎昌琪，刘佳（2009）. 沸腾换热强化特性实验研究. 《原子能科学技术》.
381. Jinhong Zhang, Changqi Yan, Puzhen Gao (2009). Erratum to “Characteristics of Pressure Drop and Correlation of Friction Factors for Single-Phase Flow in Rolling Horizontal Pipe”. Journal of Hydrodynamics.DOI
382. Jinhong Zhang, Changqi Yan, Puzhen Gao (2009). Characteristics of Pressure Drop and Correlation of Friction Factors for Single-Phase Flow in Rolling Horizontal Pipe. Journal of Hydrodynamics.DOI
383. Haifeng Gu, Changqi Yan, Licheng Sun (2009). Experimental Study on the Fluid Stratification Mechanism in the Density Lock. Journal of Nuclear Science and Technology.DOI
384. Changqi Yan (2009). Research on the miniaturization of lubricating-oil cooler. Applied science and technology.
385. Changqi Yan (2009). Transient analysis of passive residual heat removal system under blackout accident. Applied science and technology.
386. 王升飞，阎昌琪，谷海峰，曹夏昕（2008）. 密度锁启动过程中传热特性的实验研究. 《核动力工程》.
387. 阎昌琪，侯山高，曹夏昕（2008）. 滑油冷却器强化换热试验研究. 《核动力工程》.
388. 谷海峰，阎昌琪（2008）. 密度锁内分层传热特性的初步探讨. 《核动力工程》.
389. 栾锋，阎昌琪（2008）. 摇摆状态下水平管内气-水两相流流型的判定方法. 《核动力工程》.
390. 阎昌琪，于凯秋，栾锋，曹夏昕（2008）. 摇摆对气-液两相流流型及空泡份额的影响. 《核动力工程》.
391. 张金红，阎昌琪，孙中宁（2008）. 摇摆状态下水平管内气液两相流流型转换研究. 《哈尔滨工程大学学报》.
392. 于凯秋，曹夏昕，阎昌琪，孙中宁（2008）. 摇摆状态下两相流空泡份额变化规律分析. 《哈尔滨工程大学学报》.
393. 张金红，阎昌琪，曹夏昕，孙中宁（2008）. 摇摆状态下水平管中单相水的摩擦阻力实验研究. 《核动力工程》.
394. Haifeng Gu, Changqi Yan (2008). Experimental Study of Transient-State Characteristics of Temperature in the Density Lock. Volume 2: Fuel Cycle and High Level Waste Management; Computational Fluid Dynamics, Neutronics Methods and Coupled Codes; Student Paper Competition.DOI
395. Changqi Yan (2008). Miniaturization of lubricating-oil cooler. Applied science and technology.
396. Changqi Yan (2008). Preliminary Study on Heat Transfer Characteristics of Stratified Fluid in Density Lock. Hedongli gongcheng.
397. 阎昌琪（2007）. 气液两相流. 《哈工程大》.
398. 栾锋，阎昌琪，曹夏昕（2007）. 摇摆对竖直管内气-水两相流流型的影响分析. 《工程热物理学报》.
399. 宁德亮，阎昌琪，高璞珍（2007）. 新型电容式蒸汽湿度传感器结构设计. 《传感器与微系统》.
400. Deliang Ning, Changqi Yan, Puzhen Gao (2007). Study on a Novel Sensor of Wetness Measurement in Water/Air Flows. AIP conference proceedings.DOI
401. 曹夏昕，阎昌琪，孙中宁（2007）. 气-液两相泡状流在摇摆状态下的摩擦压降计算. 《核动力工程》.
402. 张金红，阎昌琪，方红宇，黄渭堂（2007）. 摇摆对水平管内气液两相流流型的影响. 《核科学与工程》.
403. 刘兆年，阎昌琪，尹莹（2007）. 非能动余热排出换热器传热特性研究. 《计算》.
404. 曹夏昕，阎昌琪，孙中宁（2007）. 摇摆状态下竖直管内弹状流单元物理模型解析. 《核动力工程》.
405. 曹夏昕，阎昌琪，孙立成，孙中宁（2007）. 摇摆状态下竖直管内单相水阻力特性实验研究. 《核动力工程》.
406. 栾锋，阎昌琪（2007）. 摇摆状态下水平管内气-水两相流的流型研究. 《核动力工程》.
407. 曹夏昕，阎昌琪，孙中宁（2007）. 摇摆状态下竖直管内环状流摩擦压降计算. 《核动力工程》.
408. 丁铭，阎昌琪，孙立成（2007）. 整体针翅管流动阻力特性实验研究. 《核动力工程》.
409. Feng Luan, Changqi Yan, Xingwei Jiang (2007). ICONE15-10684 INVESTIGATION ON FLOW PATTERN OF GAS-WATER FLOW IN HORIZONTAL TUBES IN ROLLING STATE. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
410. Xiaxin Cao, Changqi Yan, Licheng Sun, Feng Luan (2007). ICONE15-10108 Analysis of Transition from Bubble Flow to Slug Flow in Rolling Vertical Tubes. The Proceedings of the International Conference on Nuclear Engineering (ICONE).DOI
411. Changqi Yan (2007). Research for Rolling Effects on Flow Pattern of Gas-Water Flow in Horizontal Tubes. Hedongli gongcheng.
412. 宁德亮，阎昌琪，高璞珍（2006）. 新型电容式蒸汽湿度传感器及提高测量精度的方法. 《仪器仪表学报》.
413. 宁德亮，庞凤阁，阎昌琪，高璞珍（2006）. 新型湿度测量仪在气-水系统中的应用. 《哈尔滨工程大学学报》.
414. 曹夏昕，阎昌琪，孙立成，孙中宁，黄渭堂（2006）. 竖直管内弹状流向搅混流转变界限的判定. 《核动力工程》.
415. 黄渭堂，孙中宁，阎昌琪（2006）. 钛波槽管水平管外凝结换热的实验研究. 《哈尔滨工程大学学报》.
416. 孙立成，阎昌琪，孙中宁（2006）. 竖直环形流道内欠热沸腾时的气泡行为研究. 《核动力工程》.
417. 刘永阔，谢春丽，夏虹，阎昌琪（2006）. 核电厂两种实时故障诊断系统的对比. 《核动力工程》.
418. 路广遥，孙中宁，王经，阎昌琪（2006）. 窄缝环形通道内流动阻力特性的实验研究. 《核动力工程》.
419. 黄渭堂，阎昌琪，照日格图（2006）. 钛波槽冷却管的疲劳及静载强度分析. 《核动力工程》.
420. 贾辉，曹夏昕，阎昌琪，张金红（2006）. 摇摆状态下气液两相流流型转变的实验研究. 《核科学与工程》.
421. 范广铭，阎昌琪，曹夏昕（2006）. 摇摆状态与竖直状态下两相流流型和压差波动的对比研究. 《计算》.
422. 王东旭，阎昌琪（2006）. 核科学与技术专业学科建设的探讨与思考——哈尔滨工程大学“十五”高教科研课题研究报告. 《高教科研2006（下册：专题研究）》.
423. 栾锋，阎昌琪，曹夏昕，姜兴伟（2006）. 摇摆对垂直上升管内气液两相流截面含气率影响的研究. 《核科学与工程》.
424. 曹夏昕，阎昌琪，孙立成，孙中宁（2006）. 摇摆状态下竖直管内单相水摩擦压降特性分析. 《哈尔滨工程大学学报》.
425. Xiaxin Cao, Changqi Yan, Puzhen Gao, Zhongning Sun (2006). Pressure Drop Correlations of Single-Phase and Two-Phase Flow in Rolling Tubes.DOI
426. Changqi Yan (2006). Experimental Investigation on the Single-Phase Flow Friction in Narrow Annulus. Hedongli gongcheng.
427. Changqi Yan (2006). Contrastive Research on Two Kinds of Real-Time Fault Diagnosis Systems of Nuclear Power Plants. Hedongli gongcheng.
428. Changqi Yan (2006). Investigation of condensation heat transfer of horizontal titanium circular-grooved tube. Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University.
429. 路广遥，孙中宁，王经，阎昌琪（2005）. 窄缝环形流道内流动传热特性的实验研究. 《动力工程学报》.
430. 曹夏昕，阎昌琪（2005）. 倾斜管内气液两相流流型的实验研究. 《核动力工程》.
431. 孙立成，阎昌琪，孙中宁（2005）. 窄环隙内水流动沸腾时阻力特性的实验研究. 《哈尔滨工程大学学报》.
432. 吕襄波，阎昌琪，孙立成（2005）. 密度锁在反应堆非能动安全中的作用分析. 《核动力工程》.
433. 丁铭，阎昌琪，缪红建，孙立成（2005）. 整体针翅管强化传热实验研究. 《核动力工程》.
434. 黎华，阎昌琪（2005）. 反应堆主冷却剂系统实时仿真计算. 《核动力工程》.
435. 曹夏昕，阎昌琪，孙立成（2005）. 向上倾斜管内气-水两相流流型转变分析. 《核科学与工程》.
436. Hua Li, Changqi Yan (2005). Real-time simulation calculation of reactor coolant system. Hedongli gongcheng.
437. Changqi Yan (2005). Experimental Study of Gas-Liquid Flow Pattern in Inclined Pipe. Hedongli gongcheng.
438. Changqi Yan (2005). Experimental research on enhancement heat transfer of lubricating-oil cooler. Applied science and technology.
439. 孙中宁，孙立成，阎昌琪，黄渭堂（2004）. 窄缝环形流道单相摩擦阻力特性实验研究. 《核动力工程》.
440. 阎昌琪，吕襄波，孙立成（2004）. 流动欠热沸腾空泡份额的研究. 《核动力工程》.
441. 刘永阔，夏虹，谢春丽，阎昌琪（2004）. 基于模糊神经网络的核动力装置设备故障诊断系统研究. 《核动力工程》.
442. 孙中宁，谈和平，阎昌琪（2003）. 窄隙流道自然对流沸腾流动不稳定性实验研究. 《哈尔滨工业大学学报》.
443. 孙中宁，曹夏昕，阎昌琪，谈和平，孙立成（2003）. 竖直窄环隙通道内的强迫对流换热. 《工程热物理学报》.
444. 曹红军，阎昌琪，曹述栋，贾玖强（2003）. 用RELAP5对非能动堆芯应急冷却系统的瞬态分析. 《核动力工程》.
445. 孙中宁，阎昌琪，黄渭堂，谈和平（2003）. 管外及窄环隙流道池沸腾换热对比实验分析. 《哈尔滨工程大学学报》.
446. 孙中宁，阎昌琪，谈和平，孙立成，郭建强（2003）. 窄环隙流道强迫对流换热实验研究. 《核动力工程》.
447. 孙立成，阎昌琪，孙中宁（2003）. 窄环隙内强迫流动阻力特性的实验研究. 《核动力工程》.
448. Licheng Sun, Changqi Yan, Zhongning Sun, Qinghua Zhang (2003). Flow resistance characteristics of water in narrow annulus during heat exchange. Journal of Marine Science and Application.DOI
449. 孙中宁，阎昌琪，谈和平，郭建强，孙立成（2002）. 双侧加热窄环隙流道强迫对流换热. 《核动力工程》.
450. 孙立成，阎昌琪，孙中宁（2002）. 窄环隙内单相对流换热的实验研究. 《核科学与工程》.
451. 阎昌琪（2001）. 动力工程专业英语 = Fundamentals and Basic Concepts for Power Engineering. 《哈尔滨工程大学出版社》.
452. 孙中宁，阎昌琪，杜泽（2001）. 光管及窄环隙流道池沸腾换热实验研究. 《工程热物理学报》.
453. 阎昌琪（2001）. 核能工程专业英语. 《黑龙江哈尔滨工程大学》.
454. 黄渭堂，阎昌琪，孙中宁，于文艳（2001）. 钛螺纹槽管传热及流动阻力的实验研究. 《核动力工程》.
455. 孙中宁，谈和平，阎昌琪（2001）. 外侧加热环隙流道自然循环流动沸腾临界热负荷分析研究. 《核动力工程》.
456. 阎昌琪，孙中宁，孙立成（2001）. 反应堆失水事故条件下热管段内的两相流逆向流动研究. 《核科学与工程》.
457. 阎昌琪，孙中宁（2001）. 冷凝器强化传热特性分析. 《核科学与工程》.
458. 阎昌琪，孙中宁（2001）. 竖直管内两相流逆向流动特性研究. 《核动力工程》.
459. 孙中宁，杜泽，阎昌琪，张志华（2000）. 竖直及倾斜环隙流道内自然对流沸腾临界热负荷. 《核科学与工程》.
460. 阎昌琪，孙中宁（2000）. 流动欠热沸腾通道内净蒸汽产生起始点的确定. 《核科学与工程》.
461. 孙中宁，阎昌琪，杜泽，张志华（2000）. 窄环隙流道内自然对流沸腾换热实验研究. 《核科学与工程》.
462. 阎昌琪，孙中宁，李洪喜（2000）. 深海潜器用小型核动力的研制与发展前景. 《核动力工程》.
463. 孙中宁，杜泽，阎昌琪，李兆俊（2000）. 竖直环隙流道内沸腾换热启动时的动态特性. 《核动力工程》.
464. 阎昌琪，孙中宁（2000）. 流动欠热沸腾起始点计算模型的分析研究. 《哈尔滨工程大学学报》.
465. 孙中宁，杜泽，黄渭堂，阎昌琪，王明为（1998）. 单头螺纹槽管管内紊流对流换热. 《核动力工程》.
466. 黄渭堂，阎昌琪，孙中宁，杜泽（1998）. 螺纹槽管冷凝器若干应用问题的探讨. 《哈尔滨工程大学学报》.
467. 黄渭堂，阎昌琪，孙仲宁，孙福泰（1998）. 冷凝器小型化技术研究. 《核科学与工程》.
468. 黄渭堂，刘天才，孙中宁，阎昌琪（1998）. 螺纹槽管传热与阻力特性的实验研究. 《哈尔滨工程大学学报》.
469. 黄渭堂，欧贵宝，阎昌琪，孙中宁（1997）. 螺纹槽管的疲劳强度试验及分析. 《发电设备》.
470. 孙中宁，黄渭堂，阎昌琪，孙福泰（1996）. 管内插螺旋丝紊流对流换热性能研究. 《核动力工程》.
471. 阎昌琪，黄渭堂，王文祥，杜泽（1994）. 竖管内淹没及其消失滞后问题的研究. 《核科学与工程》.
472. 阎昌琪（1994）. 直角弯头连接的竖直管与水平管中的淹没问题. 《核动力工程》.
473. 阎昌琪（1994）. 淹没过程中管内压差和流型的变化. 《计算》.
474. 阎昌琪，孙福泰，孙仲宁（1993）. 管径和气体入口条件对淹没过程的影响. 《核动力工程》.
475. 阎昌琪，李洪喜（1992）. 核能在低温供热方面的应用. 《节能技术》.
476. 阎昌琪（1992）. 池式反应堆内欠热沸腾空泡份额的研究. 《哈尔滨工程大学学报》.
477. 阎昌琪（1992）. 流动欠热水中空泡份额变化的实验研究. 《核科学与工程》.
478. 阎昌琪（1992）. 竖直管内淹没及流向反转的实验研究. 《核动力工程》.
479. 阎昌琪（1990）. 反应堆核燃料组件定位格架的两相流动压降计算. 《核动力工程》.
480. 阎昌琪，黄渭堂（1989）. 用γ射线衰减技术测量两相流空泡份额的实验研究. 《计算》.

书籍章节

1. Yuquan Shang, Weiguang Zhao, Changqi Yan (2023). Multi-objective Optimization Design of Plate Heat Exchanger for Spent Fuel Pool Cooling System. Springer proceedings in physics.DOI