百晓学者学者目录

李宏坤

大连理工大学机械工程学院

个人简介

李宏坤，大连理工大学机械工程学院教授、博士生导师、硕士生导师，研究方向包括工业通用技术及设备、机械工业、畜牧与动物医学。长期从事大型旋转机械设备智能运维研究，涉及机械系统复杂测试、微弱信号特征提取、故障诊断、剩余使用寿命预测等。主持国家自然科学基金重点项目、重大研究计划培育项目、面上项目及青年项目等多项国家级科研项目。

精选作品

期刊论文

  1. Shuai Lv, Shujie Liu, Hongkun Li, Yu Wang, Gengshuo Liu (2026). A Multi-Path Degradation Modeling Framework With Adaptive Fractional Brownian Motion for Robust RUL Prediction in Mechanical Systems. Quality And Reliability Engineering International, Vol. 420, No. 10.DOI
  2. 代月帮，吴昊栋，杜俊杰，雍建华，刘海波，刘同冈，李宏坤（2026）. 牛鼻铣刀切触工件区域解析识别方法研究. 《风机技术》.
  3. 贺长波，许文杰，何刘海，曹正，樊薇，杨来浩，李宏坤（2026）. 多模态振动下裂纹对叶片动应变重构的影响. 《应用基础与工程科学学报》.DOI
  4. Wei Xiang, Shu-Jie Liu, Hongkun Li, Xiao-Yu Cao, Bo Han (2026). Cross-domain fault diagnosis of rotating machinery based on class-imbalanced joint domain adaptation network. Knowledge-Based Systems.DOI
  5. haoyu wang, Kun Shan, Hongkun Li (2026). A multi-scale dynamic convolution ResNet intelligent diagnosis method based on STFT. Engineering Research Express.DOI
  6. Changbo He, Liangliang Hu, Xuefang Xu, Peng Chen, Wei Fan, Hongkun Li (2026). A cross-domain bearing fault diagnosis method under sample imbalance based on multi-view information cross-integration ensemble learning. Structural Health Monitoring.DOI
  7. Yuhang Zhang, Mingyang Yuan, Hongwei Cao, Chuang Wang, Hongkun Li (2026). A periodically extended short-time fourier transform for nonuniformly sampled single-probe blade tip timing signals. Journal of Sound and Vibration.DOI
  8. C Wang, Mingyang Yuan, Yuhang Zhang, Hongkun Li (2026). Campbell diagram analysis method of a bladed disk considering mistuning effect. Measurement.DOI
  9. Chaoge Wang, Xiangyi Meng, Bangping Gu, Shu Li, Ran Wang, Liang Yu, Hongkun Li (2026). Remaining useful life prediction using sparse physics-informed neural network driven by degradation dynamics under incomplete data. Measurement Science and Technology.DOI
  10. Mingyang Yuan, Chuijie Wu, Kun Shan, Yuhang Zhang, Z D Zhang, Hongkun Li (2026). Blade vibration parameter identification under small-angle probe layouts: a multi-resolution ESPRIT-based frequency extension approach. Measurement Science and Technology.DOI
  11. Changbo He, Jiapeng Wang, Liang Yu, Ran Wang, Wei Fan, Hongkun Li (2026). A novel method to identify weak fault features in strong composite noise by enhanced cyclic correlation entropy with truncated nuclear norm LRSD. Mechanical Systems and Signal Processing.DOI
  12. Mingxin Shan, Yangli Tian, Junwei Liu, Jingyu Zhai, Hongkun Li (2026). A coupled dynamic modeling framework for spatial multi-link blade adjustment mechanisms: Integrating time-varying wear and nonlinear dynamic response. Tribology International.DOI
  13. Chaoge Wang, Xiaojing Tang, Ran Wang, Jiangfeng Xian, Hongkun Li (2026). A novel unsupervised cross-domain intelligent diagnosis method for motor faults using magnetic leakage signals under data imbalance scenarios. Measurement Science and Technology.DOI
  14. Yuhang Zhang, Hongkun Li, Zhenfang Fan, Mingyang Yuan, Hongwei Cao (2026). Natural Frequency Identification of Rotating Blades From Single-Probe BTT Signals via a Periodically Extended Discrete Fourier Transform. IEEE Transactions on Instrumentation and Measurement.DOI
  15. Shuai Lv, Shujie Liu, Hongkun Li (2025). New Method for Remaining Useful Life Prediction Based on Recurrence Multi-Information Time-Frequency Transformer Networks. Quality And Reliability Engineering International, Vol. 410, No. 50.DOI
  16. Kongliang Zhang, Hongkun Li, Shunxin Cao, Chen Yang, Wei Xiang (2025). SIGTN: A novel structural Infomax Graph Transfer Networks for rotating machinery fault diagnosis in cross-condition and cross-equipment scenarios. Reliability Engineering & System Safety, Vol. 258.DOI
  17. Shuai Lv, Shujie Liu, Hongkun Li, Yu Wang, Gengshuo Liu, Wei Dai (2025). A novel method for predicting the remaining useful life of MOSFETs based on a linear multi-fractional Levy stable motion driven by a GRU similarity transfer network. Reliability Engineering & System Safety, Vol. 257.DOI
  18. 李晓飞，李宏坤（2025）. 基于ASA-LSF的非平稳扭振信号频率估计算法. 《振动、测试与诊断》.DOI
  19. 杨超，李宏坤，彭德锋，欧佳玉，王朝东（2025）. 基于DCVAE-ELM的立铣刀磨损状态识别方法. 《振动、测试与诊断》.DOI
  20. 王子博，李宏坤，张孔亮，曹顺心，孙福彪（2025）. 基于稀疏引导IEWT-MOMEDA的行星齿轮箱微弱故障检测. 《振动、测试与诊断》.DOI
  21. 熊锦翼，尹杰，黄兴国，谢仁杰，李宏坤，梁坤，姚汉兴（2025）. 日粮中添加L-肉碱对育肥猪生长性能及肠道脂质吸收的影响. 《中国饲料》.DOI
  22. Tongshuhao Feng, Zhuoran Wang, Lipeng Qiu, Hongkun Li, Zhen Wang (2025). Rolling Based on Multi-Source Time–Frequency Feature Fusion with a Wavelet-Convolution, Channel-Attention-Residual Network-Bearing Fault Diagnosis Method. Sensors.DOI
  23. Qiang Li, Chengyu Liang, Changfeng Yan, Hongkun Li, Zhenhui Ma, Xichun Guan (2025). Performance degradation assessment of mechanical system based on dual adaptive drift coefficient state-space model with autocorrelation prediction error correction. Mechanical Systems and Signal Processing.DOI
  24. Chaoge Wang, Xiaojing Tang, Jiangfeng Xian, Hongkun Li (2025). Siamese dual-feature network for open-set cross-domain fault diagnosis in electromechanical systems bearing using current signals. Measurement.DOI
  25. Chuang Wang, Hongkun Li, Yugang Chen, Hongwei Cao, Yuhang Zhang, Xinwei Zhao (2025). A novel blade tip timing data generation method based on the enhanced reduced-order model. Aerospace Science and Technology.DOI
  26. Hongwei Cao, Yuhang Zhang, Yugang Chen, Chuang Wang, Hongkun Li (2025). A single-sensor method for synchronous resonance frequency estimation of rotating blades based on peak window features. Measurement.DOI
  27. Hongkun Li, Chen Yang, Bo Han, Xiao‐Yu Cao (2025). IBL-AE: An interpretable base learning autoencoder for intelligent fault diagnosis of rotating machinery. Knowledge-Based Systems.DOI
  28. Zhonglin Zhou, Daitong Wei, Hongkun Li, Peixin Gao, Yugang Chen (2025). Rotating blade vibration parameter identification in low-speed operating ranges: Based on an adaptive clustering approach. Measurement.DOI
  29. Zhaodong Wang, Shujie Liu, Hongkun Li, Defeng Peng, Hongwei Cao (2025). A novel milling force prediction method based on the AI-empowered dynamic coupling model. Mechanical Systems and Signal Processing.DOI
  30. Mingyang Yuan, Hongkun Li, Chuang Wang, Kun Shan, Yuhang Zhang (2025). Resonance frequency extraction in blade tip timing systems: An improved MVDR beamforming method for severe non-uniform under-sampled conditions. Measurement.DOI
  31. Changbo He, Zehua Fan, Peng Chen, Wei Fan, Zhixiong Li, Hongkun Li (2025). A sequence ensemble method based on Sparse Transformer with bidirectional gated recurrent convolution unit for remaining useful life prediction. Nondestructive Testing And Evaluation.DOI
  32. Junxiang Wang, Hongkun Li, Bin Sun, Yang Chen, Jiayi Li, Yefei Liu (2025). Application of the dynamic masking chirplet transform method in rotating Machinery fault diagnosis. Mechanical Systems and Signal Processing.DOI
  33. Yuming Wang, Chaoge Wang, Funa Zhou, Daofang Chang, Hongkun Li (2025). DTCWPNet: A Novel Interpretable Intelligent Fault Diagnosis Model for Rotating Machinery Systems Based on Sensor Data. IEEE Sensors Journal.DOI
  34. Hongkun Li, Kongliang Zhang, Shunxin Cao, Chen Yang, Wei Xiang (2025). Investigation on dynamic characteristics of the planetary gearbox with tooth root crack fault under variable speed conditions. Measurement Science and Technology.DOI
  35. Bin Sun, Hongkun Li, Junxiang Wang (2025). Two-stage dynamic time warping for intelligent fault detection of rotating machinery under variable speed. Measurement Science and Technology.DOI
  36. Hongkun Li, Qiang Li, Zhenhui Ma, Xuejun Liu, Xichun Guan, Xiaoli Zhang (2025). Estimating remaining useful life with degraded correlated diffusion coefficient and enhanced state-space model under stable distribution process. Mechanical Systems and Signal Processing.DOI
  37. Defeng Peng, Hongkun Li, Yuhang Jiang, Zhaodong Wang, Tao Ren (2025). Cutting force estimation based on machine current data-driven mathematical model. Measurement.DOI
  38. Chaoge Wang, Xinyu Tian, Funa Zhou, Ran Wang, Hongkun Li (2025). Incipient Fault Identification of Bearings in Electric Drive System Under Varying Speeds Based on Adaptive Feature Mode Decomposition. IEEE Sensors Journal.DOI
  39. Chaoge Wang, Xinyu Tian, Funa Zhou, Xinhao Shao, Xiaofeng Liang, Hongkun Li (2025). Fault diagnosis of electric transmission system based on graph-enhanced deep feature fusion network model using efficient decision mapping. Measurement Science and Technology.DOI
  40. Bin Sun, Hongkun Li, Junxiang Wang, Shuai Lv, Zhenhui Ma (2025). Differential time-frequency mode decomposition and its application in rotating machinery fault diagnosis. Mechanical Systems and Signal Processing.DOI
  41. Shuai Lv, Shujie Liu, Hongkun Li, Bin Sun, Kongliang Zhang (2025). A method combining dynamic path matching with multipath adaptive drift Lévy stable motion for performance degradation prediction. Structural Health Monitoring.DOI
  42. Chaoge Wang, Ran Wang, Yuanyuan Huang, Lijun Wang, Hongkun Li (2025). A novel tacholess order tracking method for planetary gearbox fault detection under variable rotational speed conditions. Measurement Science and Technology.DOI
  43. Defeng Peng, Hongkun Li, Bin Sun, Zhaodong Wang (2025). Tool wear monitoring by estimating milling torque and calculating the wear energy coefficient under variable depth of cut conditions. ISA Transactions.DOI
  44. Daitong Wei, Yugang Chen, Peixin Gao, Hongkun Li, Yu Tao (2025). A novel method for vibration measurement of rotating blisk based on blade tip pulse width. Measurement.DOI
  45. Chaoge Wang, Pengpeng Jia, Xinyu Tian, Xiaojing Tang, Xiong Hu, Hongkun Li (2025). Fault Diagnosis of Semi-Supervised Electromechanical Transmission Systems Under Imbalanced Unlabeled Sample Class Information Screening. Entropy.DOI
  46. Daitong Wei, Yu Tao, Peixin Gao, Hongkun Li, Yugang Chen (2025). Sparse-assisted blade tip timing signal decomposition and automatic resonance region identification method. Mechanical Systems and Signal Processing.DOI
  47. Bin Sun, Hongkun Li, Chaoge Wang, Zhenhui Ma, Xichun Guan (2025). Optimized weights Time-Frequency Analysis: A novel method for fault diagnosis in rotating Machinery under Time-Varying speeds. Mechanical Systems and Signal Processing.DOI
  48. Chaoge Wang, Jiechen Sun, Xiangyi Meng, Yixiao Zhang, Hongkun Li (2025). Multi-stage degradation feature with dynamic feedback mechanism for remaining useful life prediction. Nondestructive Testing And Evaluation.DOI
  49. Junxiang Wang, Hongkun Li, Xuejun Liu, Bin Sun, Yefei Liu (2025). Bearing fault diagnosis method using CNN with denoising structure under strong noise background. Measurement Science and Technology.DOI
  50. Bin Sun, Hongkun Li, Junxiang Wang, Siyuan Chen, Yizhuo Yang, Zhenhui Ma (2025). Adaptive fault components extraction based on physically interpretable optimized weight time–frequency matrix index and its applications in rotating machinery fault diagnosis. Structural Health Monitoring.DOI
  51. Junxiang Wang, Bin Sun, Siyuan Chen, Yefei Liu, Hongkun Li (2025). REPESgram: A Novel Method for the Optimal Demodulation Band Selection in Rolling Bearing Fault Diagnosis. IEEE Transactions on Instrumentation and Measurement.DOI
  52. Hongwei Cao, Yugang Chen, Yuhang Zhang, Mingyang Yuan, Hongkun Li (2025). A High-Precision Measurement Method for Blade Tip Vibration and Clearance Based on Capacitive Sensor. IEEE Transactions on Instrumentation and Measurement.DOI
  53. 郭振兴，韦良开，谢仁杰，刘洋，甘海清，李宏坤，姚汉兴，王晓明，罗国升，邓敦，黄兴国（2024）. 发酵饲料和湿拌料对断奶仔猪生长性能、抗氧化能力及肠道菌群的影响. 《动物营养学报》.
  54. 吴梓辰，张龙林，李俊瑶，李宏坤，谭碧娥，王婧（2024）. 宁乡母猪与约克夏母猪初乳免疫球蛋白水平及微生物区系组成的比较. 《中国畜牧杂志》.
  55. 王朝阁，张奇奇，周福娜，王冉，胡雄，李宏坤（2024）. 时变转速下基于IFMD的行星齿轮箱微弱故障诊断. 《振动工程学报》.
  56. 陈建国，王创，闫伟国，杨春立，李宏坤，王珍（2024）. 基于功率流有限元法的涡旋压缩机振动特性研究. 《流体机械》.
  57. 项伟，刘淑杰，李宏坤，曹顺心，吕帅，杨晨（2024）. 参数自适应CYCBD的滚动轴承复合故障特征提取. 《航空动力学报》.
  58. Chen Yang, Hongkun Li, Shunxin Cao, Kongliang Zhang, Wei Xiang, Xuejun Liu (2024). CE-FFGAN: A feature fusion generative adversarial network with deep embedded category information for limited sample fault diagnosis of rotating machinery under speed variation. Advanced Engineering Informatics.DOI
  59. Xuejun Liu, Wei Sun, Hongkun Li, Qiang Li, Zhenhui Ma, Chen Yang (2024). Unknown working condition fault diagnosis of rotate machine without training sample based on local fault semantic attribute. Advanced Engineering Informatics.DOI
  60. Wei Xiang, Shujie Liu, Hongkun Li, Chen Yang, Shunxin Cao, Kongliang Zhang (2024). Prototype-assisted multiscale graph representation learning-based mechanical fault detection method under complex operating conditions. Structural Health Monitoring.DOI
  61. Shuben Xu, Daitong Wei, Hongkun Li, Yugang Chen (2024). Identification of blade vibration parameters based on improved blade tip timing technology and two-factor analysis method. Measurement Science and Technology.DOI
  62. xiaolin wang, Hongkun Li, Zhihua Cheng (2024). Fault diagnosis of control valves based on small-sample hybrid physics improved Resnet. Measurement Science and Technology.DOI
  63. Kongliang Zhang, Hongkun Li, Shunxin Cao, Chen Yang, Wei Xiang (2024). Dynamic characteristics and experimental verification of planetary gear-motor coupling system under unsteady and non-ideal states. Nonlinear Dynamics.DOI
  64. Chen Yang, Hongkun Li, Shunxin Cao, Kongliang Zhang, Wei Xiang (2024). A fast method for robust estimation of gearbox instantaneous speed. Mechanical Systems and Signal Processing.DOI
  65. 李佳豪，李超，臧长江，孟军，李宏坤，贾怡琪，麦丽克扎提·艾尔肯，唐纳尔·托留别克（2023）. 灌胃和腹腔注射鼠李糖乳杆菌对妊娠期小鼠粪便菌群多样性的影响. 《中国畜牧兽医》.
  66. 李宏坤，魏代同，陈玉刚，许书本（2023）. 数字孪生驱动的旋转叶盘振动状态全景感知方法. 《机械工程学报》.
  67. 张文卓，曲政，李丙乾，许晓明，王珍，陈建国，闫伟国，李宏坤（2023）. 变频涡旋压缩机噪声特性及降噪方法研究. 《流体机械》.
  68. 王博识，刘延川，李宏坤，彭德锋（2023）. 基于声发射信号的桥式起重机主梁结构裂纹损伤检测. 《无损检测》.
  69. 刘延川，彭德锋，王博识，李宏坤（2023）. 基于多指标信息的起重机裂纹监测方法. 《起重运输机械》.
  70. 王博识，刘延川，李宏坤，彭德锋（2023）. 基于Matlab的起重机结构声发射信号监测分析系统. 《中国科技信息》.
  71. Defeng Peng, Hongkun Li (2023). Intelligent monitoring of milling tool wear based on milling force coefficients by prediction of instantaneous milling forces. Mechanical Systems and Signal Processing.DOI
  72. Gangjin Huang, Hongkun Li, Chaoge Wang, Yuanliang Zhang (2023). 1D-SCRN: a novel approach for industrial machinery performance degradation trend prediction. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
  73. Jiannan Dong, Hongkun Li, Hongwei Cao, Zhenfang Fan, Yugang Chen (2023). An improved blade tip timing dual-probe method of synchro-resonance frequency identification for blade damage detection. Mechanical Systems and Signal Processing.DOI
  74. Chen Yang, Hongkun Li, Shunxin Cao, Kongliang Zhang (2023). Detection and cancellation method of impulse noise in gearbox non-stationary vibration signals—a case study of port ship unloader. Measurement Science and Technology.DOI
  75. Qiang Li, Hongkun Li, Zhenhui Ma, Xuejun Liu, Xichun Guan, Xiaoli Zhang (2023). Remaining useful life prediction of mechanical system based on improved adaptive fractional Lévy stable motion with statistical dependence measurement error. Mechanical Systems and Signal Processing.DOI
  76. Qiang Li, Hongkun Li, Zhenhui Ma, Xuejun Liu, Xichun Guan, Xiaoli Zhang (2023). Performance degradation assessment for mechanical system based on semi-analytical solution of self-similar stable distribution process. Structural Health Monitoring.DOI
  77. Kongliang Zhang, Hongkun Li, Shunxin Cao, Shai Lv, Chen Yang, Wei Xiang (2023). Trusted multi-source information fusion for fault diagnosis of electromechanical system with modified graph convolution network. Advanced Engineering Informatics.DOI
  78. Zhaodong Wang, Hongkun Li, Yuanliang Zhang, Jiayu Ou, Dianheng Jiang, Defeng Peng, Chao Yang, Yuebang Dai (2023). A novel model reduction technique for time-varying dynamic milling process of thin-walled components. The International Journal of Advanced Manufacturing Technology.DOI
  79. Wenzhuo Zhang, Bingqian Li, Weiguo Yan, Zhen Wang, Xiaoqian Yang, Hongkun Li, Jianguo Chen, Jin Liang Xu (2023). Research on the influence of check valve on noise performance of variable frequency scroll refrigeration compressor. International Journal of Aeroacoustics.DOI
  80. Yuebang Dai, Hongkun Li, Haibo Liu, Jianhua Yong, Chao Yang, Chaodong Wang, Shengxian Liu (2023). Dynamics and stability analysis of five-axis ball end milling with low radial immersion considering cutter runout. Journal of Manufacturing Processes.DOI
  81. Xuejun Liu, Wei Feng Sun, Hongkun Li, Qiang Li, Shuai Lv (2023). A Fusing Domain Feature and Sharing Label Space-Based Fault Diagnosis Approach for Different Distribution and Unlabeled Rolling Bearing Sample. IEEE Transactions on Instrumentation and Measurement.DOI
  82. Hongkun Li, Daitong Wei, CHEN Yugang, XU Shuben (2023). A Full-field Sensing Method for Vibration State of Rotating Bladed Disks Driven by Digital Twin. Journal of Mechanical Engineering.DOI
  83. 王树杰，李宏坤，王朝阁，孙斌，刘艾强（2022）. 基于ICSA-MCKD方法的滚动轴承声信号微弱故障诊断. 《大连理工大学学报》.
  84. 董祥雨，魏代同，李宏坤（2022）. 基于本征正交分解的斗轮堆取料机俯仰结构降阶方法. 《矿山机械》.
  85. 魏代同，陈星，陈玉刚，李宏坤（2022）. 基于本征正交分解的叶片碰摩系统降阶方法. 《航空动力学报》.
  86. 胡少梁，李宏坤，王朝阁，胡瑞杰（2022）. 基于MEWT-ASCS的行星齿轮箱微弱故障特征提取. 《振动、测试与诊断》.
  87. 孙斌，李宏坤，刘艾强，张孔亮（2022）. 基于GLCT和FPO的时变工况行星齿轮箱故障特征提取. 《风机技术》.
  88. Xuejun Liu, Wei Sun, Hongkun Li, Zeeshan Hussain, Aiqiang Liu (2022). The Method of Rolling Bearing Fault Diagnosis Based on Multi-Domain Supervised Learning of Convolution Neural Network. Energies.DOI
  89. Hongkun Li, Zhenfang Fan, Jiannan Dong, Yugang Chen, Hongwei Cao, Daitong Wei (2022). An improved blade vibration difference-based two-parameter plot method for synchronous vibration parameter identification of rotating blades. Measurement.DOI
  90. Junjie Li, Shuiguang Tong, Zheming Tong, Hongkun Li, Feiyun Cong, Weihao Cheng, Guangming Dong (2022). Investigating the vibration response and modulation mechanism for health monitoring of wind turbine planetary gearboxes using a tribodynamics-based analytical model. Measurement Science and Technology.DOI
  91. Daitong Wei, Chen Yugang, Hongkun Li, Zhang Xiaowen (2022). Real-time reconstruction method of full-field dynamic response of rotating bladed disks. Mechanical Systems and Signal Processing.DOI
  92. Xuejun Liu, Wei Feng Sun, Hongkun Li, Zibo Wang, Qiang Li (2022). Imbalanced Sample Fault Diagnosis of Rolling Bearing Using Deep Condition Multidomain Generative Adversarial Network. IEEE Sensors Journal.DOI
  93. Jiayu Ou, Hongkun Li, Zhaodong Wang, Chao Yang, Defeng Peng (2022). Tool wear recognition and signal labeling with small cross-labeled samples in impeller machining. The International Journal of Advanced Manufacturing Technology.DOI
  94. Defeng Peng, Hongkun Li, Yuebang Dai, Zhaodong Wang, Jiayu Ou (2022). Prediction of milling force based on spindle current signal by neural networks. Measurement.DOI
  95. Jiayu Ou, Hongkun Li, Bo Liu, Defeng Peng (2022). Deep transfer residual variational autoencoder with multi-sensors fusion for tool condition monitoring in impeller machining. Measurement.DOI
  96. Chen Yang, Hongkun Li, Shunxin Cao (2022). Unknown fault diagnosis of planetary gearbox based on optimal rank nonnegative matrix factorization and improved stochastic resonance of bistable system. Nonlinear Dynamics.DOI
  97. Zhenfang Fan, Hongkun Li, Jiannan Dong, Daitong Wei, Hongwei Cao, Yugang Chen (2022). An improved mistuning identification and dynamic strain prediction method for rotating blades with application of blade tip timing technology. Mechanical Systems and Signal Processing.DOI
  98. Qiang Li, Zhenhui Ma, Hongkun Li, Xuejun Liu, Xichun Guan, Peihua Tian (2022). Remaining useful life prediction of mechanical system based on performance evaluation and geometric fractional Lévy stable motion with adaptive nonlinear drift. Mechanical Systems and Signal Processing.DOI
  99. Jiannan Dong, Hongkun Li, Zhenfang Fan, Xinwei Zhao, Daitong Wei, Yugang Chen (2022). Characteristics analysis of blade tip timing signals in synchronous resonance and frequency recovery based on subspace pursuit algorithm. Mechanical Systems and Signal Processing.DOI
  100. Yuebang Dai, Hongkun Li, Hongwei Cao, Zhiye Huang, Chao Yang, Chaodong Wang (2022). A Novel Gegenbauer Wavelet-Based Approach for Stability and Surface Location Error Analyses of Milling Process. Journal of Dynamic Systems Measurement and Control.DOI
  101. Defeng Peng, Hongkun Li, Jiayu Ou, Zhaodong Wang (2022). Milling chatter identification by optimized variational mode decomposition and fuzzy entropy. The International Journal of Advanced Manufacturing Technology.DOI
  102. Shunxin Cao, Hongkun Li, Kongliang Zhang, Chen Yang, Fubiao Sun, Zibo Wang (2022). An improved chaotic recognition method for weak signal frequency and its application to fault diagnosis of planetary gearboxes. Measurement Science and Technology.DOI
  103. Daitong Wei, Hongkun Li, Yugang Chen, Hongwei Cao, Zhenfang Fan, Yuzhi Li (2022). Development of blade tip timing signal simulator based on a novel model reduction method of bladed disks. Journal of Sound and Vibration.DOI
  104. Qiang Zhou, Hongkun Li, Jiannan Dong, Zuowen Zhong, Shiwen Sun (2022). Experimental investigation on the unsteady pressure pulsation and vibration of a nuclear pump test loop. Energy Science & Engineering.DOI
  105. Hongkun Li, Xinwei Zhao, Qiang Zhou, Shuhua Yang, Xiaowen Zhang (2022). Experimental Investigation on the Mechanism of Impeller Synchronous and Nonsynchronous Vibrations in an Industrial Centrifugal Compressor. Journal of Engineering for Gas Turbines and Power.DOI
  106. Aiqiang Liu, Zuye Yang, Hongkun Li, Chaoge Wang, Xuejun Liu (2022). Intelligent Diagnosis of Rolling Element Bearing Based on Refined Composite Multiscale Reverse Dispersion Entropy and Random Forest. Sensors.DOI
  107. Shunxin Cao, Hongkun Li, Kongliang Zhang, Zhaodong Wang (2022). Early Fault Diagnosis of Gearbox Based on VWPSO-VMD. Journal of Physics Conference Series.DOI
  108. Qiang Li, Changfeng Yan, Guangyi Chen, Huibin Wang, Hongkun Li, Lixiao Wu (2022). Remaining Useful Life prediction of rolling bearings based on risk assessment and degradation state coefficient. ISA Transactions.DOI
  109. Yuebang Dai, Hongkun Li, Bo Liu, Chao Yang (2022). Calculation boundary vulnerability of numerical algorithm in milling stability prediction. The International Journal of Advanced Manufacturing Technology.DOI
  110. Bo Liu, Hongkun Li, Jiayu Ou, Zhaodong Wang, Wei Feng Sun (2022). Intelligent recognition of milling tool wear status based on variational auto-encoder and extreme learning machine. The International Journal of Advanced Manufacturing Technology.DOI
  111. Daitong Wei, Hongkun Li, Yugang Chen, Xinwei Zhao, Jiannan Dong, Zhenfang Fan (2022). A novel model reduction technique for mistuned blisks based on proper orthogonal decomposition in frequency domain. Aerospace Science and Technology.DOI
  112. Zhenfang Fan, Hongkun Li, Hongwei Cao, Jiannan Dong (2022). Research on Running Status Monitoring and Rotating Blade Crack Detection of Large-Scale Centrifugal Compressor Based on Blade Tip Timing Technique. IEEE Transactions on Instrumentation and Measurement.DOI
  113. Kongliang Zhang, Hongkun Li, Shunxin Cao, Chen Yang, Fubiao Sun, Zibo Wang (2022). Motor current signal analysis using hypergraph neural networks for fault diagnosis of electromechanical system. Measurement.DOI
  114. 许雨晨，李宏坤，马跃，黄刚劲，张明亮（2021）. 基于退化检测和优化粒子滤波的轴承寿命预测方法. 《大连理工大学学报》.
  115. 黄新新，李佳豪，李晓斌，李宏坤，贾怡琪，马利鑫，李超，贺林娇（2021）. 灌喂鼠李糖乳杆菌对妊娠后期小鼠粪便菌群多样性影响. 《新疆农业科学》.
  116. 代月帮，李宏坤（2021）. 铣削动力学高效分析方法及其在五轴加工中的应用研究. 《金属加工(冷加工)》.
  117. Xuejun Liu, Hongkun Li, Wei Feng Sun (2021). An End-to-end Fault Diagnosis Method of Rolling Bearing Based on Convolution Neural Network. Global Reliability and Prognostics and Health Management (PHM).DOI
  118. Kongliang Zhang, Hongkun Li, Shunxin Cao, Chaoge Wang, Bin Sun, Aiqiang Liu (2021). Investigation on planetary gearbox fault mechanism under variable speed conditions based on rigid-flexible coupling dynamics model. Engineering Failure Analysis.DOI
  119. Shuai Li, Yan Liu, Mohammad Omidi, Chuang Zhang, Hongkun Li (2021). Numerical Investigation of Transient Flow Characteristics in a Centrifugal Compressor Stage with Variable Inlet Guide Vanes at Low Mass Flow Rates. Energies.DOI
  120. Zhenfang Fan, Hongkun Li, Jiannan Dong, Xinwei Zhao (2021). An improved multiple per revolution-based blade tip timing method and its applications on large-scale compressor blades. Mechanical Systems and Signal Processing.DOI
  121. Jiannan Dong, Hongkun Li, Zhenfang Fan, Xinwei Zhao (2021). Time-Frequency Sparse Reconstruction of Non-Uniform Sampling for Non-Stationary Signal. IEEE Transactions on Vehicular Technology.DOI
  122. Yuebang Dai, Hongkun Li, Defeng Peng, Zhenfang Fan, Guowei Yang (2021). A novel scheme with high accuracy and high efficiency for surface location error prediction. The International Journal of Advanced Manufacturing Technology.DOI
  123. Zhenfang Fan, Hongkun Li, Jiannan Dong, Xinwei Zhao, Daitong Wei, Qiang Zhou (2021). Blade Vibration Difference-Based Identification of Blade Vibration Parameters: A Novel Blade Tip Timing Method. Journal of Sound and Vibration.DOI
  124. Shuai Li, Yan Liu, Hongkun Li, Mohammad Omidi (2021). Numerical Study of the Improvement in Stability and Performance by Use of a Partial Vaned Diffuser for a Centrifugal Compressor Stage. Applied Sciences.DOI
  125. Xinwei Zhao, Hongkun Li, Shuhua Yang, Zhenfang Fan, Yang Wang (2021). Experimental determination of IGV preswirl effect on impeller blade vibration in an unshrouded centrifugal compressor. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
  126. Gangjin Huang, Hongkun Li, Jiayu Ou, Xiaofei Li, Yuanliang Zhang (2021). A performance degradation assessment method using one-dimensional sparse representation self-learning dictionary. Measurement Science and Technology.DOI
  127. Chaoge Wang, Hongkun Li, Kongliang Zhang, Shaoliang Hu, Bin Sun (2021). Intelligent fault diagnosis of planetary gearbox based on adaptive normalized CNN under complex variable working conditions and data imbalance. Measurement.DOI
  128. Qiang Zhou, Xinwei Zhao, Lin Pei, Hongkun Li (2021). Investigation on pressure pulsation and modal behavior of the impeller in a nuclear reactor coolant pump. Energy Science & Engineering.DOI
  129. Xinwei Zhao, Hongkun Li, Shuhua Yang, Zhenfang Fan, Jiannan Dong, Hongwei Cao (2021). Blade vibration measurement and numerical analysis of a mistuned industrial impeller in a single-stage centrifugal compressor. Journal of Sound and Vibration.DOI
  130. Jiayu Ou, Hongkun Li, Gangjin Huang, Bo Liu, Zhaodong Wang (2021). Tool Wear Recognition Based on Deep Kernel Autoencoder With Multichannel Signals Fusion. IEEE Transactions on Instrumentation and Measurement.DOI
  131. Zhenfang Fan, Hongkun Li, Jiannan Dong, Xinwei Zhao, Hongwei Cao (2021). Shifting Straight-Line Fitting Method to Calculate Blade Vibration Based on Blade Tip Timing. IEEE Transactions on Instrumentation and Measurement.DOI
  132. Chuang Wang, Zhen Wang, Weiguo Yan, Hongkun Li, Chunli Yang (2021). Study on Characteristics of the Vibration and Noise of High‐Power Scroll Compressor. Shock and Vibration.DOI
  133. Yuebang Dai, Hongkun Li, Guowei Yang, Defeng Peng (2021). A novel method with Newton polynomial-Chebyshev nodes for milling stability prediction. The International Journal of Advanced Manufacturing Technology.DOI
  134. Changbo He, Jérôme Antoni, Alessandro Paolo Daga, Hongkun Li, Ning Chu, Siliang Lu, Zhixiong Li (2020). An Improved Key-Phase-Free Blade Tip-Timing Technique for Nonstationary Test Conditions and Its Application on Large-Scale Centrifugal Compressor Blades. IEEE Transactions on Instrumentation and Measurement.DOI
  135. Hongkun Li, Gangjin Huang, Jiayu Ou, Yuanliang Zhang (2020). Intelligent Fault Diagnosis of Planetary Wheel Bearing Using Constrained Independent Component Analysis and Stacked Sparse Autoencoder.DOI
  136. Qiang Zhou, Hongkun Li, Lin Pei, Zuowen Zhong (2020). Research on non-uniform pressure pulsation of the diffuser in a nuclear reactor coolant pump. Nuclear Engineering and Technology.DOI
  137. Jiayu Ou, Hongkun Li, Gangjin Huang, Guowei Yang (2020). Intelligent analysis of tool wear state using stacked denoising autoencoder with online sequential-extreme learning machine. Measurement.DOI
  138. Chaoge Wang, Hongkun Li, Jiayu Ou, Ruijie Hu, Shaoliang Hu, Aiqiang Liu (2020). Identification of planetary gearbox weak compound fault based on parallel dual-parameter optimized resonance sparse decomposition and improved MOMEDA. Measurement.DOI
  139. Jiayu Ou, Hongkun Li, Gangjin Huang, Qiang Zhou (2020). A Novel Order Analysis and Stacked Sparse Auto-Encoder Feature Learning Method for Milling Tool Wear Condition Monitoring. Sensors.DOI
  140. Gangjin Huang, Hongkun Li, Jiayu Ou, Yuanliang Zhang, Mingliang Zhang (2020). A Reliable Prognosis Approach for Degradation Evaluation of Rolling Bearing Using MCLSTM. Sensors.DOI
  141. Gangjin Huang, Shungang Hua, Qiang Zhou, Hongkun Li, Yuanliang Zhang (2020). Just Another Attention Network for Remaining Useful Life Prediction of Rolling Element Bearings. IEEE Access.DOI
  142. Jiannan Dong, Hongkun Li, Zhenfang Fan, Qiang Zhou, Shungang Hua (2020). A Joint Optimization Algorithm Using Adaptive Minimum Coset Number Based Discrete Multi-Coset Sampling. IEEE Access.DOI
  143. 贺长波，李宏坤，赵新维，王维民，吴淑明（2019）. 基于总体最小二乘准则旋转不变子空间法的叶尖定时欠采样信号分析. 《机械工程学报》.
  144. 代月帮，李宏坤，周强，刘胜贤（2019）. 基于增强型完全离散法的球头铣刀五轴加工稳定域建模方法研究. 《机械工程学报》.
  145. Fengtao Wang, Gang Deng, Linjie Ma, Xiaofei Liu, Hongkun Li (2019). Convolutional Neural Network Based on Spiral Arrangement of Features and Its Application in Bearing Fault Diagnosis. IEEE Access.DOI
  146. Xinwei Zhao, Qiang Zhou, Shuhua Yang, Hongkun Li (2019). Rotating Stall Induced Non-Synchronous Blade Vibration Analysis for an Unshrouded Industrial Centrifugal Compressor. Sensors.DOI
  147. Chaoge Wang, Hongkun Li, Jiayu Ou, Gangjin Huang (2019). Early Weak Fault Diagnosis of Gearbox Based on ELMD and Singular Value Decomposition. Prognostics and System Health Management Conference.DOI
  148. Gangjin Huang, Hongkun Li, Yuan-Liang Zhang, Chaoge Wang, Jiayu Ou (2019). Incipient Fault Feature Extraction of Rolling Bearing Based on Full Vector Complete Ensemble Empirical Mode Decomposition. International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.DOI
  149. Hongkun Li, Chaoge Wang, Jiayu Ou (2019). Incipient Fault Diagnosis of the Planetary Gearbox Based on Improved Variational Mode Decomposition and Frequency-Weighted Energy Operator. Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy.DOI
  150. Changbo He, Pei Niu, Rui Yang, Chaoge Wang, Zhixiong Li, Hongkun Li (2019). Incipient rolling element bearing weak fault feature extraction based on adaptive second-order stochastic resonance incorporated by mode decomposition. Measurement.DOI
  151. Yuebang Dai, Hongkun Li, Jianglei Dong, Qiang Zhou, Jianhua Yong, Shengxian Liu (2019). An updated model of stability prediction in five-axis ball-end milling. The International Journal of Advanced Manufacturing Technology.DOI
  152. Fengtao Wang, Liu Xiaofei, Linjie Ma, Gang Deng, Han Qingkai, Hongkun Li (2019). A Fault Diagnosis Model Based on Kernel Auto-encoder and Improved Chaos Firefly Optimization Algorithm. IEEE International Instrumentation and Measurement Technology Conference.DOI
  153. Yong Sang, Yuebang Dai, Hongkun Li, Weiqi Sun, Xudong Wang (2019). High-Precision Large-Displacement Measuring Method with Walking Pattern. Instruments and Experimental Techniques.DOI
  154. Fengtao Wang, Xiaofei Liu, Gang Deng, Yu Xiaoguang, Hongkun Li, Qingkai Han (2019). Remaining Life Prediction Method for Rolling Bearing Based on the Long Short-Term Memory Network. Neural Processing Letters.DOI
  155. Chaoge Wang, Hongkun Li, Gangjin Huang, Jiayu Ou (2019). Early Fault Diagnosis for Planetary Gearbox Based on Adaptive Parameter Optimized VMD and Singular Kurtosis Difference Spectrum. IEEE Access.DOI
  156. HE Changbo, Hongkun Li, ZHAO Xinwei, WANG Weimin, Shuming Wu (2019). Analysis Method for Under-sampled Blade Tip-timing Signal Based on the Rotational Invariance Technique with Total Least Squares Principle. Journal of Mechanical Engineering.DOI
  157. Hongkun Li, HAO Baitian, Yuebang Dai, YANG Rui (2019). Wear Status Recognition for Milling Cutter Based on Compressed Sensing and Noise Stacking Sparse Auto-encoder. Journal of Mechanical Engineering.DOI
  158. Yuebang Dai, Hongkun Li, ZHOU Qiang, Shengxian Liu (2019). Research on Modeling Method of Machining Stability in Five-axis Ball End Milling Based on Enhanced Complete Discretization Method. Journal of Mechanical Engineering.DOI
  159. 代月帮，魏兆成，李宏坤，张孟哲（2018）. 基于接触区域的球头铣刀颤振稳定域预报方法研究. 《机械工程学报》.
  160. Hongkun Li, Yuebang Dai, Zhenfang Fan (2018). Improved precise integration method for chatter stability prediction of two-DOF milling system. The International Journal of Advanced Manufacturing Technology.DOI
  161. Yuebang Dai, Hongkun Li, Jinxin Yao, Shengxian Liu (2018). A novel approach with time-invariant transition matrix for surface location error prediction in low radial immersion milling. The International Journal of Advanced Manufacturing Technology.DOI
  162. Changbo He, Hongkun Li, Zhixiong Li, Xinwei Zhao (2018). An improved bistable stochastic resonance and its application on weak fault characteristic identification of centrifugal compressor blades. Journal of Sound and Vibration.DOI
  163. Chaoge Wang, Hongkun Li, Rui Yang, Mengfan Hou, Daolong Tang, Jiayu Ou (2018). Fault Diagnosis of Planetary Gearbox Based on Complementary Ensemble Empirical Mode Decomposition and Teager Energy Operator. Prognostics and System Health Management Conference.DOI
  164. Fengtao Wang, Gang Deng, Chenxi Liu, Wensheng Su, Qingkai Han, Hongkun Li (2018). A deep feature extraction method for bearing fault diagnosis based on empirical mode decomposition and kernel function. Advances in Mechanical Engineering.DOI
  165. Changbo He, Hongkun Li, Xinwei Zhao (2018). Weak characteristic determination for blade crack of centrifugal compressors based on underdetermined blind source separation. Measurement.DOI
  166. Hongkun Li, Rui Yang, Chaoge Wang, Changbo He (2018). Investigation on Planetary Bearing Weak Fault Diagnosis Based on a Fault Model and Improved Wavelet Ridge. Energies.DOI
  167. Fengtao Wang, Bosen Dun, Gang Deng, Hongkun Li, Qingkai Han (2018). A deep neural network based on kernel function and auto-encoder for bearing fault diagnosis. IEEE International Instrumentation and Measurement Technology Conference.DOI
  168. Hongkun Li, Changbo He, Reza Malekian, Zhixiong Li (2018). Weak Defect Identification for Centrifugal Compressor Blade Crack Based on Pressure Sensors and Genetic Algorithm. Sensors.DOI
  169. Rui Yang, Hongkun Li, Changbo He, Zhixin Zhang (2018). Rolling element bearing weak fault diagnosis based on optimal wavelet scale cyclic frequency extraction. Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering.DOI
  170. Rui Yang, Hongkun Li, Chaoge Wang, Changbo He (2018). Rolling element bearing weak feature extraction based on improved optimal frequency band determination. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
  171. Yuebang Dai, Hongkun Li, Baitian Hao (2018). An improved full-discretization method for chatter stability prediction. The International Journal of Advanced Manufacturing Technology.DOI
  172. Yuebang Dai, Hongkun Li, Zhaocheng Wei, Haiyun Zhang (2018). Chatter stability prediction for five-axis ball end milling with precise integration method. Journal of Manufacturing Processes.DOI
  173. Fengtao Wang, Chenxi Liu, Wensheng Su, Zhigang Xue, Qingkai Han, Hongkun Li (2018). Combined Failure Diagnosis of Slewing Bearings Based on MCKD‐CEEMD‐ApEn. Shock and Vibration.DOI
  174. Fengtao Wang, Bosen Dun, Xiaofei Liu, Yuhang Xue, Hongkun Li, Qingkai Han (2018). An Enhancement Deep Feature Extraction Method for Bearing Fault Diagnosis Based on Kernel Function and Autoencoder. Shock and Vibration.DOI
  175. Fengtao Wang, Xiaofei Liu, Chenxi Liu, Hongkun Li, Qingkai Han (2018). Remaining Useful Life Prediction Method of Rolling Bearings Based on Pchip‐EEMD‐GM(1, 1) Model. Shock and Vibration.DOI
  176. Haroon Rashid, Hongkun Li, Zahid Hussain Hulio (2018). Dynamic Behaviour Analysis of Single Stage Planetary Gearbox Under Non-Stationary Operations Using Experimental Test Rig.DOI
  177. Hongkun Li, Chaoge Wang, Mengfan Hou, Rui Yang, Daolong Tang (2018). Weak fault feature extraction of gear based on KVMD and singular value difference spectrum. MATEC Web of Conferences.DOI
  178. 李宏坤，杨蕊，任远杰，何德鲁，郭斌（2017）. 利用粒子滤波与谱峭度的滚动轴承故障诊断. 《机械工程学报》.
  179. Yuebang Dai, Hongkun Li, Xinyu Xing, Baitian Hao (2017). Prediction of chatter stability for milling process using precise integration method. Precision Engineering.DOI
  180. Rui Yang, Hongkun Li, Dao-Long Tang, Meng-Fan Hou (2017). Based on the optimal frequency band of maximum correlation kurtosis de-convolution for bearing weak fault diagnosis. Prognostics and System Health Management Conference.DOI
  181. Hongkun Li, Changbo He, Qiang Zhou, Fuan Lu (2017). Blade Incipient Crack Determination for Centrifugal Compressor Based on CWT-Stochastic Resonance Method.DOI
  182. Fengtao Wang, Chenxi Liu, Wensheng Su, Zhigang Xue, Hongkun Li, Qingkai Han (2017). Condition monitoring and fault diagnosis methods for low-speed and heavy-load slewing bearings: a literature review. Journal of Vibroengineering.DOI
  183. Fengtao Wang, Xutao Chen, Chenxi Liu, Dawen Yan, Qingkai Han, Hongkun Li (2017). Reliability assessment of rolling bearing based on principal component analysis and Weibull proportional hazard model. IEEE International Instrumentation and Measurement Technology Conference.DOI
  184. Hongkun Li (2017). Rolling Element Bearing Diagnosis Using Particle Filter and Kurtogram. Journal of Mechanical Engineering.DOI
  185. Hongkun Li, Shuai Zhou, Honglong Kan, Ming Cong (2016). Milling cutter condition reliability prediction based on state space model. Journal of Vibroengineering.DOI
  186. Yuefang Wang, Yan Liu, Xuejun Wang, Hongkun Li, Daren Jiang (2016). Random Vibration Analysis for Centrifugal Compressor Impellers With Unsteady Aerodynamic Excitations.DOI
  187. Hongkun Li, Changbo He, Daren Jiang, Wang Xue-jun (2016). Blade Incipient Crack Determination for Centrifugal Compressor Based on Pressure Pulsation Signal Feature Extraction.DOI
  188. Hongkun Li (2016). Weak Fault Enhancement Method for Blade Crack by Using Stochastic Resonance. Journal of Mechanical Engineering.DOI
  189. Pengfei Zhao, Yan Liu, Hongkun Li, Xiaofang Wang, Jinguang Yang (2016). The effect of impeller–diffuser interactions on diffuser performance in a centrifugal compressor. Engineering Applications of Computational Fluid Mechanics.DOI
  190. 丛明，李泳耀，孙宗余，李宏坤（2015）. 机床温度测点优化方法研究及试验验证. 《大连理工大学学报》.
  191. Hongkun Li, Xiaowen Zhang, Yan Liu, Fujian Xu, Shuai Zhou (2015). Investigation on Acoustic Resonance for Different Diffuser and Effect on Centrifugal Compressor Pipeline Failure.DOI
  192. 李宏坤，张晓雯，郭骋，张学峰（2014）. 离心式压缩机声共振分析与试验验证. 《机械工程学报》.
  193. 李宏坤，汪寅虎，杨树华，赵鹏仕（2014）. 基于声发射信号的铣刀运行可靠性评估. 《大连理工大学学报》.
  194. Hongkun Li, Fujian Xu, Hongyi Liu, Xuefeng Zhang (2014). Incipient fault information determination for rolling element bearing based on synchronous averaging reassigned wavelet scalogram. Measurement.DOI
  195. Hongkun Li, Yinhu Wang, Pengshi Zhao, Xiaowen Zhang, Peilin Zhou (2014). Cutting tool operational reliability prediction based on acoustic emission and logistic regression model. Journal of Intelligent Manufacturing.DOI
  196. Hongkun Li (2014). Investigation on Blind Source Separation for Under-determined Mixtures Based on Time-frequency Analysis and Weak Feature Extraction. Journal of Mechanical Engineering.DOI
  197. Hongkun Li, Xuefeng Zhang, Xiaowen Zhang, Shuhua Yang, Fujian Xu (2014). Pressure Pulsation Signal Analysis for Centrifugal Compressor Blade Crack Determination. Mathematical Problems in Engineering.DOI
  198. Hongkun Li (2014). Acoustic Resonance Analysis for Centrifugal Compressor and Experiment Verification. Journal of Mechanical Engineering.DOI
  199. Hongkun Li (2014). Method for the Optimal Continuous Wavelet Reconstruction Scale Determination and Early Fault Classification. Journal of Mechanical Engineering.DOI
  200. 王凤利，李宏坤（2013）. 基于EEMD的柴油机缸套磨损故障诊断. 《大连理工大学学报》.
  201. Hongkun Li, Xuefeng Zhang, Fujian Xu (2013). Experimental Investigation on Centrifugal Compressor Blade Crack Classification Using the Squared Envelope Spectrum. Sensors.DOI
  202. Hongkun Li, Yinhu Wang (2013). Rolling bearing reliability estimation based on logistic regression model. International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.DOI
  203. Hongkun Li, Xiaoting Lian, Cheng Jun Guo, Pengshi Zhao (2013). Investigation on early fault classification for rolling element bearing based on the optimal frequency band determination. Journal of Intelligent Manufacturing.DOI
  204. Hongkun Li (2013). Application on Weak Information Classification by Using Wavelet Scalogram Synchronous Averaging. Journal of Mechanical Engineering.DOI
  205. Hongkun Li, Hongyi Liu, Xuefeng Zhang, Fujian Xu (2013). A method for machine condition classification based on Hilbert spectrum quantitative analysis and support vector machine. Journal of Vibroengineering.DOI
  206. 李宏坤，郭义杰，丁健，周帅，郭骋（2012）. 基于面板声功率贡献量分析的齿轮箱噪声控制方法研究. 《大连理工大学学报》.
  207. 王凤利，李宏坤（2012）. 利用ICA的局域波分解及其在机械故障诊断中应用. 《大连理工大学学报》.
  208. 李宏坤，赵长生，周帅，郭义杰（2011）. 基于小波包—坐标变换的滚动轴承故障特征增强方法. 《机械工程学报》.
  209. 李宏坤，赵长生，郭骋，赵利华（2011）. GM(1,1)模型改进算法及其应用研究. 《大连理工大学学报》.
  210. Hongkun Li (2010). Application of EMD denoising and spectral kurtosis in early fault diagnosis of rolling element bearings. Zhendong yu chongji.
  211. Hongkun Li (2010). Independent component analysis based sub-band in time-frequency images and it's application in fault diagnosis. Zhendong yu chongji.
  212. 马川，李宏坤（2009）. 基于循环平稳分析的二重调幅信号识别研究与应用. 《机械工程师》.
  213. Hongkun Li (2009). Application of independent component analysis in empirical mode decomposition. Zhendong yu chongji.
  214. Hongkun Li (2009). Investigation on Double Amplitude Modulation Signal Classification Based on Cyclostationary Analysis and Application. Mechanical Engineer.
  215. 别锋锋，郭正刚，张志新，李宏坤，王奉涛（2008）. 往复式压缩机故障信息模糊二元树诊断方法研究. 《大连理工大学学报》.
  216. 李宏坤，张志新，马孝江，王珍（2008）. 基于Hilbert谱熵的柴油机故障诊断方法研究. 《大连理工大学学报》.
  217. 李宏坤，鞠培刚，张志新，马孝江（2008）. 基于小波包频带能量分布的往复机故障诊断方法研究. 《机械工程师》.
  218. 任全民，马孝江，苗刚，李宏坤，王奉涛（2007）. 局域波法和高阶统计量在压缩机气阀状态监测中应用. 《大连理工大学学报》.
  219. Hongkun Li, Peilin Zhou, MA Xiao-jiang (2006). Marine Diesel Engine Fault Diagnosis by Using an Improved Hilbert Spectrum. Journal of Ship Research.DOI
  220. Hongkun Li, MA Xiao-jiang (2006). Investigation on Fault Diagnosis System Based on Time Spatial Information Fusion Theory. World Congress on Intelligent Control and Automation.DOI
  221. 李宏坤，马孝江，王珍（2004）. 基于小波K-L信息量柴油机故障诊断方法的研究. 《农业机械学报》.
  222. 李宏坤，马孝江（2003）. 局域波法在船舶柴油机燃油系统故障诊断中应用. 《大连理工大学学报》.
  223. 王珍，马孝江，李吉，李宏坤（2003）. 基于局域波法和K-L信息量的柴油机故障诊断方法. 《大连理工大学学报》.
  224. Hongkun Li, Xiaojiang He Yong (2003). Diesel fault diagnosis technology based on the theory of fuzzy neural network information fusion.DOI

预印本

  1. Chuang Wang, Hongkun Li, Xinwei Zhao, Xiaolin Wang, Mingyang Yuan (2025). Model Reduction and Damping Mistuning Identification Method for Mistuned Rotating Bladed Disks Under Variable Speed. SSRN Electronic Journal.DOI
  2. Jiayu Ou, Jie Li, Gangjin Huang, Hongkun Li, Guanghao Chen, Wei Pan, Changxia Liu (2025). Milling Tools Running Status Monitoring for Centrifugal Compressor Impeller with Scarce Samples. SSRN Electronic Journal.DOI
  3. Chuang Wang, Hongkun Li, Yugang Chen, Hongwei Cao, Yuhang Zhang, Xinwei Zhao (2025). A Novel Blade Tip Timing Simulator for Variable-Speed Bladed Disks with Realistic Mistuning Effects. SSRN Electronic Journal.DOI
  4. Mingxin Shan, Yangli Tian, Junwei Liu, Jingyu Zhai, Hongkun Li (2025). Dynamic Coupling Modeling and Evolution Mechanism of Nonlinear Dynamics and Time-Varying Wear in Spatial Blade Adjustment Mechanism with Clearances. SSRN Electronic Journal.DOI
  5. Daitong Wei, Hongkun Li, Peixin Gao, Yugang Chen, Chuang Wang (2023). Mistuning Identification and Model Updating Approach for Bladed Disks Based on Blade Tip Timing. SSRN Electronic Journal.DOI

书籍章节

  1. Hongkun Li, Zhixin Zhang (2010). Diesel Engine Condition Classification Based on Mechanical Dynamics and Time-Frequency Image Processing. Dynamical Systems.DOI

研究方向

工业通用技术及设备机械工业畜牧与动物医学

此主页由公开资料整理，尚未经学者本人认领。