吴从义｜华中科技大学｜学者主页

2026

Study on the infrared femtosecond laser ablation behavior and mechanism of pressureless sintered silicon carbide ceramics

Xiao-Zhu Chen, Congyi Wu, You-Min Rong, Guo-Jun Zhang, Yu Huang

Ceramics International

DOI

2026

Study on femtosecond laser surface graphitization and tribological performance optimization of carbon fiber reinforced silicon carbide (Cf/SiC) composites

Xiao-Zhu Chen, Congyi Wu, You-Min Rong, Guo-Jun Zhang, Yu Huang

Ceramics International

DOI

2026

Precision Cutting of CF/PEEK by UV Nanosecond Laser for On-Orbit Manufacturing Applications

Wen-Qian Wu, Bing Wei, Yu Huang, Congyi Wu

Micromachines

DOI

2026

A Corner-Analysis-Based Method for Dimensional Inspection and Defect Detection of Glass Chamfers

Jie Jiang, Tian Wang, Yan Zhou, Wangshicheng Wang, Congyi Wu, Bing Wei

Italian National Conference on Sensors

DOI

2026

Process and Mechanism of Cutting Polyamide Films with an Ultraviolet Picosecond Laser

Qin Xie, Tian Wang, Yan Zhou, Zeyue Gao, Jie Jiang, Congyi Wu, Bing Wei, Yu Huang

Micromachines

DOI

2025

皮秒激光刻蚀CVD金刚石微槽的缺陷特征研究

曹龙超，胡文星，王俊涛，李维鸿，郭文涛，蔡旺，吴从义

《中国激光》

2025

Two-step laser processing of micro/nano-composite structures on PS-SiC surfaces for superior friction performance under water-lubrication

Xiao-Zhu Chen, Yu Huang, You-Min Rong, Congyi Wu

Ceramics International

DOI

2025

Preparation of a super wear-resistant surface on WC-Co cemented carbide by combing femtosecond laser texturing and DLC coating

Xiao-Zhu Chen, Congyi Wu, You-Min Rong, Guo-Jun Zhang, Yu Huang

Ceramics International

DOI

2025

Precision cutting of the ABS film by ultraviolet picosecond laser

Zeyue Gao, Teng Deng, Congyi Wu, You-Min Rong, Guo-Jun Zhang, Yu Huang

Optics & Laser Technology

DOI

2025

Laser rapid scanning strategy for bitmaps via image segmentation utilizing grey wolf optimizer

Tian Zhang, You-Min Rong, Xiufeng Liu, Siyang Cao, Yufeng Liang, Congyi Wu, Guo-Jun Zhang, Yu Huang

Optics & Laser Technology

DOI

2025

Polishing of EB-PBF Ti6Al4V Vertical Surfaces with Semi-Melted Particle Characteristics Realized by Continuous Laser

Xiao-Zhu Chen, Congyi Wu, You-Min Rong, Guo-Jun Zhang, Yu Huang

Micromachines

DOI

2025

Femtosecond Laser Precision Etching of Silver Layer on Silica Aerogel Surfaces

Shengtian Lin, Congyi Wu, Guo-Jun Zhang, Jin-Jin Wu

Micromachines

DOI

2025

Surface roughness and microstructure of 3D Cf/C composites by square flat-top femtosecond laser scribing

Ningxiao Wang, You-Min Rong, Guangyi Zhang, Hang Chen, Yu Huang, Congyi Wu

Ceramics International

DOI

2024

Simulation and Experimental on Thermal Behavior of Hydrostatic Thrust Bearing Based on Superhydrophobic/oleophobic Surface

Ming-Hui Guo, Guo-Jun Zhang, Hai-Dong Hu, Zhuxin Tian, You-Min Rong, Yu Huang, Congyi Wu

Journal of tribology

DOI

2024

Regulation of molten pool in borosilicate glass welding with picosecond laser based on multifocal shaping

Hang Chen, You-Min Rong, Ningxiao Wang, Xin-xin Fan, Yu Huang, Congyi Wu, Siyang Cao

Journal of Non-Crystalline Solids

DOI

2024

Thick Glass High-Quality Cutting by Ultrafast Laser Bessel Beam Perforation-Assisted Separation

Su Chen, Yuxuan Luo, Xin-xin Fan, Congyi Wu, Guo-Jun Zhang, Yu Huang, You-Min Rong, Long Chen

Micromachines

DOI

2024

Ultrafast laser-chemical modification hybrid fabrication of hydrostatic bearings with a superhydrophobicity solid-liquid interface

Ming-Hui Guo, You-Min Rong, Yu Huang, Xiaolin Feng, Hai-Dong Hu, Congyi Wu, Guo-Jun Zhang

Science China Technological Sciences

DOI

2024

Hierarchical structure on tin bronze hydrostatic bearing surfaces to achieve ultra-high Cassie stability

Ming-Hui Guo, Guo-Jun Zhang, You-Min Rong, Xiufeng Liu, Yu Huang, Congyi Wu

Journal of Alloys and Compounds

DOI

2024

Generation of multi-focus shaping with high uniformity based on an improved Gerchberg-Saxton algorithm.

Hang Chen, Ningxiao Wang, Yu Huang, Congyi Wu, You-Min Rong

Applied Optics

DOI

2024

A novel path planning approach to minimize machining time in laser machining of irregular micro-holes using adaptive discrete grey wolf optimizer

Tian Zhang, Hai-Dong Hu, Yufeng Liang, Xiufeng Liu, You-Min Rong, Congyi Wu, Guo-Jun Zhang, Yu Huang

Computers & industrial engineering

DOI

2024

Interface behavior and pore distribution of Ti6Al4V/CFRTP joints affected by groove profile

Lu Wang, You-Min Rong, Jun Xu, Congyi Wu, Jiangbo Hu, Yu Huang, Siyang Cao, Guo-Jun Zhang

Surfaces and Interfaces

DOI

2024

Picosecond Laser Processing Super-Wetting Surfaces with Hierarchical Structures for Passive Driving of Microfluidics

Xin-xin Fan, Yu Huang, Guo-Jun Zhang, Congyi Wu, You-Min Rong

Colloids and Surfaces A: Physicochemical and Engineering Aspects

DOI

2024

Study on the picosecond laser surface treatment and tribological properties of 3D woven carbon fiber reinforced carbon matrix (Cf/C) composites

Jun Xu, Guo-Jun Zhang, Lu Wang, Congyi Wu, Yu Huang, You-Min Rong

Composites Part B: Engineering

DOI

2024

One-Step Ultrafast Laser-Induced Graphitization on PS-SiC Surfaces for Superior Friction Performance

Xiao-Zhu Chen, Yu Huang, You-Min Rong, Congyi Wu

Ceramics International

DOI

2024

High-profile-quality microchannels fabricated by UV picosecond laser for microfluidic mixing

Xin-xin Fan, You-Min Rong, Guo-Jun Zhang, Congyi Wu, Yuxuan Luo, Yu Huang

Optics & Laser Technology

DOI

2024

Numerical study of titanium film ablation under different ultrafast laser parameters: a molecular dynamics simulation combined with a two-temperature model

Longchao Cao, Juntao Wang, Wenxing Hu, Congyi Wu, Sheng Liu, Libin Zhang, Zhen Wang

Applied Optics

DOI

2023

CFRP硅油辅助皮秒激光低损伤制孔工艺

陈兴华，荣佑民，李文元，吴从义，陈龙，黄禹，张国军

《激光与红外》

2023

Revealing the interaction mechanism of pulsed laser processing with the application of acoustic emission

Wei-Nan Liu, You-Min Rong, Ran-Fu Yang, Congyi Wu, Guo-Jun Zhang, Yu Huang

Frontiers of Optoelectronics

DOI

2023

Tuning the optical properties of polydimethylsiloxane films and fabricating elastic volume Bragg diffraction gratings by picosecond ultraviolet Laser-induced photochemical reactions

Jun Xu, Guo-Jun Zhang, Congyi Wu, Yu Huang, You-Min Rong

Optics & Laser Technology

DOI

2023

Lattice Boltzmann study on the effects of surface nanostructure on wettability with application in laser scanning fabrication of superhydrophobic surfaces

Hao Huang, Ming-Hui Guo, Congyi Wu, You-Min Rong, Yu Huang, Guo-Jun Zhang

Science China Technological Sciences

DOI

2023

Laser direct writing of rose petal biomimetic micro-bulge structure to realize superhydrophobicity and large slip length

Ming-Hui Guo, Guo-Jun Zhang, Guo-Qiang Xin, Hao Huang, Yu Huang, You-Min Rong, Congyi Wu

Colloids and Surfaces A: Physicochemical and Engineering Aspects

DOI

2023

Combined laser cutting process for interior holes in thick glasses

Xin-xin Fan, You-Min Rong, Guo-Jun Zhang, Congyi Wu, Yuxuan Luo, Yu Huang

Journal of Non-Crystalline Solids

DOI

2023

Field distortion correction in galvanometric scanning system by interpolation with symmetric polynomials

Tian Zhang, Yufeng Liang, Hui Wang, Congyi Wu, Guo-Jun Zhang, Yu Huang, You-Min Rong

Precision engineering

DOI

2023

Nanosecond laser-induced filamentous modification in silicate glasses

Xin-xin Fan, Guo-Jun Zhang, Yu Huang, Congyi Wu, You-Min Rong

Journal of Manufacturing Processes

DOI

2023

Microstructural Characteristics and Bonding Mechanism of Laser-Welded CFRTP/TC4 with an Oscillating Laser Beam

Lu Wang, Yu Huang, Jun Xu, Jiangbo Hu, You-Min Rong, Congyi Wu, Jia-Jun Xu

ACS Applied Engineering Materials

DOI

2023

Improving the joint strength of laser-welded CFRTP/TC4 joints via appropriate groove design

Lu Wang, You-Min Rong, Congyi Wu, Jun Xu, Jiangbo Hu, Yu Huang, Guo-Jun Zhang

Applications of Surface Science

DOI

2023

Crack suppression of glass welding by ultrafast laser without optical contact based on light modulation

Hang Chen, You-Min Rong, Yu Huang, Congyi Wu

Optics & Laser Technology

DOI

2023

Light nurtures plants: The picosecond laser-induced lithops-like microstructures on titanium alloy surface with broad-band ultra-low reflectivity

Jun Xu, Guo-Jun Zhang, Lu Wang, Congyi Wu, Yu Huang, You-Min Rong

Applications of Surface Science

DOI

2023

Study on the CFRP nanosecond laser cutting damage and efficiency by aspiration system assisted method

Chun-Meng Chen, Guo-Jun Zhang, Yu Huang, You-Min Rong, Congyi Wu, Long Chen, Zhihui Yang

Journal of Manufacturing Processes

DOI

2022

Precision cutting of PDMS film with UV-nanosecond laser based on heat generation-diffusion regulation

Congyi Wu, Jun Xu, Tian Zhang, Guo-Qiang Xin, Min Li, You-Min Rong, Guojun Zhang, Yu Huang

DOI

2022

Organic solvent assisted laser processing of transparent polymer films based on the swelling and penetration behavior

Jun Xu, Guojun Zhang, Congyi Wu, Wei-Nan Liu, Tian Zhang, Yu Huang, You-Min Rong

Optics and Laser Technology

DOI

2022

Evaluation and classification of CFRP kerf width by acoustic emission in nanosecond laser cutting

Ran-Fu Yang, Yu Huang, You-Min Rong, Congyi Wu, Wei-Nan Liu, Long Chen

Optics & Laser Technology

DOI

2022

Laser cutting of thermoplastic film: Mechanism and processing technology

Congyi Wu, You-Min Rong, Yu Huang, Guo-Jun Zhang

Science China Technological Sciences

DOI

2022

Micro-Swelling and penetration assisted laser Processing: A doping and laser processing method for polydimethylsiloxane films based on swelling and penetration behavior

Jun Xu, Guojun Zhang, Congyi Wu, Wei-Nan Liu, Tian Zhang, Yu Huang, You-Min Rong

Optics & Laser Technology

DOI

2022

Effects of Ambient Temperature on Nanosecond Laser Micro-Drilling of Polydimethylsiloxane (PDMS)

Ya Lu, Chao-Hsien Lin, Ming-Hui Guo, You-Min Rong, Yu Huang, Congyi Wu

Micromachines

DOI

2022

High-quality cutting of polypropylene (PP) film by UV nanosecond laser based on thermal ablation

Congyi Wu, You-Min Rong, Min Li, Guojun Zhang, Yu Huang, Tian Zhang

Optics and Laser Technology

DOI

2021

High-quality cutting polarizing film (POL) by 355 nm nanosecond laser ablation

You-Min Rong, Yu Huang, Min Li, Guojun Zhang, Congyi Wu

DOI

2021

Process and mechanism of cutting thermoplastic polyurethane (TPU) film by nanosecond ultraviolet laser

Guo-Qiang Xin, You-Min Rong, Yu Huang, Congyi Wu

Journal of Materials Science

DOI

2021

Anti-corrosion superhydrophobic surfaces of Al alloy based on micro-protrusion array structure fabricated by laser direct writing

Guo-Qiang Xin, Congyi Wu, Wei-Nan Liu, You-Min Rong, Yu Huang

DOI

2021

Temperature Field-Assisted Ultraviolet Nanosecond Pulse Laser Processing of Polyethylene Terephthalate (PET) Film

Jun Xu, You-Min Rong, Wei-Nan Liu, Tian Zhang, Guo-Qiang Xin, Yu Huang, Congyi Wu

Micromachines

DOI

2021

Phenolic resin plate precision cutting by ultraviolet nanosecond laser ablation regulation

Congyi Wu, Wei-Nan Liu, Min Li, Yu Huang, Guojun Zhang, You-Min Rong

DOI

2021

Cutting of polyethylene terephthalate (PET) film by 355 nm nanosecond laser

Congyi Wu, Min Li, Yu Huang, You-Min Rong

DOI

2021

Precision cutting of epoxy resin board (ERB) by ultraviolet (UV) nanosecond laser ablation with consideration of hazardous gas protection

You-Min Rong, Lu Wang, Tian Zhang, Min Li, Yu Huang, Guojun Zhang, Congyi Wu

DOI

2021

PI Film Laser Micro-Cutting for Quantitative Manufacturing of Contact Spacer in Flexible Tactile Sensor

Congyi Wu, Tian Zhang, Yu Huang, You-Min Rong

Micromachines

DOI

2021

Editorial for the Special Issue on Advanced Materials, Structures and Processing Technologies Based on Pulsed Laser

You-Min Rong, Congyi Wu, Yu Huang

Micromachines

DOI

2021

Precision cutting of polyvinyl chloride film by ultraviolet nanosecond laser

Congyi Wu, You-Min Rong, Yu Huang, Min Li, Guojun Zhang, Wei-Nan Liu

Materials and Manufacturing Processes

DOI

2021

Thermal ablation regulation for ultraviolet (UV) nanosecond laser precision cutting of polycarbonate (PC) film

Congyi Wu, You-Min Rong, Ran-Fu Yang

DOI

2021

Advanced Materials, Structures and Processing Technologies Based on Pulsed Laser

You-Min Rong, Congyi Wu, Yu Huang

DOI

2021

Laser ablation behavior and mechanism of polyimide by UV irradiation

Tian Zhang, Congyi Wu, You-Min Rong, Min Li, Yu Huang, Guojun Zhang

Materials and Manufacturing Processes

DOI

2021

Fabrication of super-wetting copper foam based on laser ablation for selective and efficient oil-water separation

Guo-Qiang Xin, Congyi Wu, Wei-Nan Liu, Miao-Zheng Wang, Yu Huang, You-Min Rong

DOI

2020

A new approach for an ultrasensitive tactile sensor covering an ultrawide pressure range based on the hierarchical pressure-peak effect.

Congyi Wu, Tian Zhang, Jian Zhang, Jin Huang, Xing Tang, Tingting Zhou, You-Min Rong, Yu Huang, Song-Xin Shi, Da-Wen Zeng

Nanoscale Horizons

DOI

2020

Stretchability improvement of flexiable electronics by laser micro-drilling array holes in PDMS film

You-Min Rong, Yu Huang, Chaoran Lin, Yi-Fei Liu, Song-Xin Shi, Guojun Zhang, Congyi Wu

DOI

2020

Superhydrophobic TC4 alloy surface fabricated by laser micro-scanning to reduce adhesion and drag resistance

Guo-Qiang Xin, Congyi Wu, Hai-Yin Cao, Wei-Nan Liu, Bo Li, Yu Huang, You-Min Rong, Guojun Zhang

DOI

2019

Multilevel Microstructured Flexible Pressure Sensors with Ultrahigh Sensitivity and Ultrawide Pressure Range for Versatile Electronic Skins.

Xing Tang, Congyi Wu, Lin Gan, Tian Zhang, Tingting Zhou, Jin Huang, Hao Wang, Chang-Sheng Xie, Da-Wen Zeng

Small

DOI

2019

High-Adhesion Stretchable Electrode via Cross-Linking Intensified Electroless Deposition on a Biomimetic Elastomeric Micropore Film.

Congyi Wu, Xing Tang, Lin Gan, Wen-Fei Li, Jian Zhang, Hao Wang, Ziyu Qin, Tian Zhang, Tingting Zhou, Jin Huang, Chang-Sheng Xie, Da-Wen Zeng

ACS Applied Materials and Interfaces

DOI

精选作品

期刊论文

Study on the infrared femtosecond laser ablation behavior and mechanism of pressureless sintered silicon carbide ceramics

Study on femtosecond laser surface graphitization and tribological performance optimization of carbon fiber reinforced silicon carbide (Cf/SiC) composites

Precision Cutting of CF/PEEK by UV Nanosecond Laser for On-Orbit Manufacturing Applications

A Corner-Analysis-Based Method for Dimensional Inspection and Defect Detection of Glass Chamfers

Process and Mechanism of Cutting Polyamide Films with an Ultraviolet Picosecond Laser

皮秒激光刻蚀CVD金刚石微槽的缺陷特征研究

Two-step laser processing of micro/nano-composite structures on PS-SiC surfaces for superior friction performance under water-lubrication

Preparation of a super wear-resistant surface on WC-Co cemented carbide by combing femtosecond laser texturing and DLC coating

Precision cutting of the ABS film by ultraviolet picosecond laser

Laser rapid scanning strategy for bitmaps via image segmentation utilizing grey wolf optimizer

Polishing of EB-PBF Ti6Al4V Vertical Surfaces with Semi-Melted Particle Characteristics Realized by Continuous Laser

Femtosecond Laser Precision Etching of Silver Layer on Silica Aerogel Surfaces

Surface roughness and microstructure of 3D Cf/C composites by square flat-top femtosecond laser scribing

Simulation and Experimental on Thermal Behavior of Hydrostatic Thrust Bearing Based on Superhydrophobic/oleophobic Surface

Regulation of molten pool in borosilicate glass welding with picosecond laser based on multifocal shaping

Thick Glass High-Quality Cutting by Ultrafast Laser Bessel Beam Perforation-Assisted Separation

Ultrafast laser-chemical modification hybrid fabrication of hydrostatic bearings with a superhydrophobicity solid-liquid interface

Hierarchical structure on tin bronze hydrostatic bearing surfaces to achieve ultra-high Cassie stability

Generation of multi-focus shaping with high uniformity based on an improved Gerchberg-Saxton algorithm.

A novel path planning approach to minimize machining time in laser machining of irregular micro-holes using adaptive discrete grey wolf optimizer

Interface behavior and pore distribution of Ti6Al4V/CFRTP joints affected by groove profile

Picosecond Laser Processing Super-Wetting Surfaces with Hierarchical Structures for Passive Driving of Microfluidics

Study on the picosecond laser surface treatment and tribological properties of 3D woven carbon fiber reinforced carbon matrix (Cf/C) composites

One-Step Ultrafast Laser-Induced Graphitization on PS-SiC Surfaces for Superior Friction Performance

High-profile-quality microchannels fabricated by UV picosecond laser for microfluidic mixing

Numerical study of titanium film ablation under different ultrafast laser parameters: a molecular dynamics simulation combined with a two-temperature model

CFRP硅油辅助皮秒激光低损伤制孔工艺

Revealing the interaction mechanism of pulsed laser processing with the application of acoustic emission

Tuning the optical properties of polydimethylsiloxane films and fabricating elastic volume Bragg diffraction gratings by picosecond ultraviolet Laser-induced photochemical reactions

Lattice Boltzmann study on the effects of surface nanostructure on wettability with application in laser scanning fabrication of superhydrophobic surfaces

Laser direct writing of rose petal biomimetic micro-bulge structure to realize superhydrophobicity and large slip length

Combined laser cutting process for interior holes in thick glasses

Field distortion correction in galvanometric scanning system by interpolation with symmetric polynomials

Nanosecond laser-induced filamentous modification in silicate glasses

Microstructural Characteristics and Bonding Mechanism of Laser-Welded CFRTP/TC4 with an Oscillating Laser Beam

Improving the joint strength of laser-welded CFRTP/TC4 joints via appropriate groove design

Crack suppression of glass welding by ultrafast laser without optical contact based on light modulation

Light nurtures plants: The picosecond laser-induced lithops-like microstructures on titanium alloy surface with broad-band ultra-low reflectivity

Study on the CFRP nanosecond laser cutting damage and efficiency by aspiration system assisted method

Precision cutting of PDMS film with UV-nanosecond laser based on heat generation-diffusion regulation

Organic solvent assisted laser processing of transparent polymer films based on the swelling and penetration behavior

Evaluation and classification of CFRP kerf width by acoustic emission in nanosecond laser cutting

Laser cutting of thermoplastic film: Mechanism and processing technology

Micro-Swelling and penetration assisted laser Processing: A doping and laser processing method for polydimethylsiloxane films based on swelling and penetration behavior

Effects of Ambient Temperature on Nanosecond Laser Micro-Drilling of Polydimethylsiloxane (PDMS)

High-quality cutting of polypropylene (PP) film by UV nanosecond laser based on thermal ablation

High-quality cutting polarizing film (POL) by 355 nm nanosecond laser ablation

Process and mechanism of cutting thermoplastic polyurethane (TPU) film by nanosecond ultraviolet laser

Anti-corrosion superhydrophobic surfaces of Al alloy based on micro-protrusion array structure fabricated by laser direct writing

Temperature Field-Assisted Ultraviolet Nanosecond Pulse Laser Processing of Polyethylene Terephthalate (PET) Film

Phenolic resin plate precision cutting by ultraviolet nanosecond laser ablation regulation

Cutting of polyethylene terephthalate (PET) film by 355 nm nanosecond laser

Precision cutting of epoxy resin board (ERB) by ultraviolet (UV) nanosecond laser ablation with consideration of hazardous gas protection

PI Film Laser Micro-Cutting for Quantitative Manufacturing of Contact Spacer in Flexible Tactile Sensor

Editorial for the Special Issue on Advanced Materials, Structures and Processing Technologies Based on Pulsed Laser

Precision cutting of polyvinyl chloride film by ultraviolet nanosecond laser

Thermal ablation regulation for ultraviolet (UV) nanosecond laser precision cutting of polycarbonate (PC) film

Advanced Materials, Structures and Processing Technologies Based on Pulsed Laser

Laser ablation behavior and mechanism of polyimide by UV irradiation

Fabrication of super-wetting copper foam based on laser ablation for selective and efficient oil-water separation

A new approach for an ultrasensitive tactile sensor covering an ultrawide pressure range based on the hierarchical pressure-peak effect.

Stretchability improvement of flexiable electronics by laser micro-drilling array holes in PDMS film

Superhydrophobic TC4 alloy surface fabricated by laser micro-scanning to reduce adhesion and drag resistance

Multilevel Microstructured Flexible Pressure Sensors with Ultrahigh Sensitivity and Ultrawide Pressure Range for Versatile Electronic Skins.

High-Adhesion Stretchable Electrode via Cross-Linking Intensified Electroless Deposition on a Biomimetic Elastomeric Micropore Film.

研究方向