管延锦｜山东大学｜学者主页

2026

Numerical study on stress distribution and failure behavior in the riveted joint of CF/PEEK composite and 2A12 aluminum alloy

Chenyi Sun, Jun Lin, Cong Shao, Xiangfei Kong, Long Qin, Yuehua Chen, Yanjin Guan, Guoqun Zhao, Hakim Naceur, Daniel Coutellier

Composite Structures

DOI

2026

Mechanical degradation and corrosion behavior of low-frequency vibration assisted riveted CFRP/Al joints

Jinglei Liu, Jun Lin, Yuqing Liu, Cong Shao, Yanjin Guan, Xiangfei Kong, Liang Chen, Guoqun Zhao

Engineering Failure Analysis

DOI

2026

Bimodal surface hardening of CoCrFeNiMn high-entropy alloy enabled by wide-temperature-range ultrasonic shot peening: Process mechanisms and property control

Heju Sun, Lihua Zhu, Jingtao Peng, Zhiqiang Liu, Shuo Lin, Wenhui Yu, Jun Lin, Yanjin Guan, Xujie Gao, Guangming Zhu, Yongling Wu, Hongyu Zheng

Journal of Materials Processing Technology

DOI

2026

Thermo-forging CF/PPS rivet for joining CF/PEEK composite and TC4 titanium alloy structures

Xiangfei Kong, Jun Lin, Cong Shao, Dong Quan, Yanjin Guan, L J Chen, Cunsheng Zhang, G P Wang, Guoqun Zhao

Composites Part B Engineering

DOI

2026

Study on ultrasonic micro-forging with ball-head on microstructure and mechanical properties of 316 L stainless steel produced by directed energy deposition

Xiaoxue Chen, Shuo Wang, Jun Lin, Guangchun Wang, Jiqiang Zhai, Yanjin Guan

Ultrasonics

DOI

2025

基于类等势场法的TB6钛合金药型罩温挤压成形工艺优化

郭正飞，朱立华，朱光明，聂兰启，管延锦，高世阳，王立伟，郑宏宇

《锻压技术》

2025

Energy-saving low-frequency vibration-assisted riveting process for joining high-strength metallic structures with enhanced performance

Cong Shao, Jun Lin, Congxiao Yu, Yanjin Guan, Liang Chen, Xiang-Shan Kong, Cunsheng Zhang, Guoqun Zhao

Journal of Cleaner Production

DOI

2025

The influence of ultrasonic shot peening on the microstructure and mechanical properties of the ultra-lightweight LA103Z alloy

Zeyu Yang, Yanjin Guan, Jiqiang Zhai, Hongqiang Chu, Fengjiao Chen, Tao Liu, Hongwei Zhang

Journal of Manufacturing Processes

DOI

2025

Enhancement of surface hardening of β phase Mg-Li alloy through nanocrystallization and amorphization by warm ultrasonic shot peening

Lihua Zhu, Liwei Wang, Meng Zhao, Zhengfei Guo, Guangming Zhu, Zongshen Wang, Jun Lin, Yanjin Guan, Yongling Wu, Hongyu Y. Zheng

Journal of Alloys and Compounds

DOI

2024

风电塔筒滚弯成形数学建模及实验研究

刘继坤，管延锦，翟继强，梁涛，张红伟，展保同，马正伦，梅录春

《锻压技术》

2024

Low-frequency vibration assisted self-pierce riveting (LV-SPR) of carbon fiber reinforced composite and aluminum alloy

Cong Shao, Jun Lin, Yanjin Guan, Dong Quan, Liang Chen, Cunsheng Zhang, Guoqun Zhao

International Journal of Machine Tools and Manufacture

DOI

2023

模具钢的高温变形行为及本构模型的建立

刘玉冰，管延锦，丁慧莹，陈凤娇，林军

《锻压技术》

2023

激光热处理对7CrSiMnMoV模具钢组织与性能的影响

刘玉冰，管延锦，李玉琦，初宏强，林军，许善军，王文明，任启华

《锻压技术》

2023

超声振动辅助微压印成形及其作用机制

翟继强，管延锦，陈凤娇，林军，初宏强

《塑性工程学报》

2023

面向“卓越工程2.0”的工科专业基础课程多元协同教学模式研究

董桂伟，管延锦，王桂龙

《黑龙江教育(高教研究与评估)》

2023

Molecular dynamics study on surface effect in ultrasonic vibration assisted upsetting of monocrystalline copper

Yuhui Zhao, Yanjin Guan, Fengjiao Chen, Hongqiang Chu, Jiqiang Zhai, Jun Lin, Liang Chen

Journal of Materials Processing Technology

DOI

2023

Macroscopic mechanism of ultrasonic vibration in ultrasonic-assisted metal forming

Jiqiang Zhai, Yanjin Guan, Ya Liu, Fengjiao Chen, Jun Lin

Journal of Materials Research and Technology

DOI

2023

Modification of the surface layer model and establishment of the surface layer thickness model of pure copper

Jiqiang Zhai, Yanjin Guan, Yuhui Zhao, Ya Liu, Fengjiao Chen

Journal of Manufacturing Processes

DOI

2023

Investigation of microstructure evolution and mechanical properties of 2A10 aluminum alloy during ultrasonic vibration plastic forming

Cong Shao, Zhiliang Wang, Jiao Li, Yadi Zhai, Jun Lin, Ruqing Bai, Yanjin Guan, Guoqun Zhao

Journal of Materials Research and Technology

DOI

2022

GGG70L球墨铸铁的高温变形行为及其本构模型建立

丁慧莹，管延锦，李玉琦，翟继强，林军

《锻压技术》

2022

互联网+背景下面向材料类复合型人才培养的实验教学改革与实践

郑超，管延锦，赵国群，宋立彬，张存生

《中国多媒体与网络教学学报(上旬刊)》

2022

工科基础课程的课程思政建设路径——以材料物理化学为例

董桂伟，王协彬，管延锦，王孝海

《大学化学》

2022

Microstructure and tensile properties of the friction stir processed LA103Z alloy

Yi Li, Yanjin Guan, Ya Liu, Jiqiang Zhai, Kai Hu, Jun Lin

Materials Characterization

DOI

2022

Experimental study on friction stir modification of LA103Z Mg-Li alloy

F J Chen, Jiebin Zhai, Yanjin Guan, Y Li, Hongye Chen, K Hu, Jinbao Lin, Q H Ren, X J Li

IOP Conference Series Materials Science and Engineering

DOI

2022

Plastic deformation behavior of Ti45Nb in ultrasonic vibration-assisted compression

Congxiao Yu, L Zhang, Z L Wang, Y D Zhai, C Shao, Jiebin Zhai, Yanjin Guan, J Lin

IOP Conference Series Materials Science and Engineering

DOI

2022

Effect on microstructure and properties of LA103Z Mg–Li alloy plate by multi-pass friction stir processing

Kai Hu, Yanjin Guan, Jiqiang Zhai, Yi Li, Fengjiao Chen, Ya Liu, Jun Lin

Journal of Materials Research and Technology

DOI

2022

Molecular dynamics study of acoustic softening effect in ultrasonic vibration assisted tension of monocrystalline/polycrystalline coppers

Yuhui Zhao, Jiqiang Zhai, Yanjin Guan, Fengjiao Chen, Ya Liu, Y. Li, Jun Lin

Journal of Materials Processing Technology

DOI

2022

A new analytical model to predict residual stress induced by ultrasonic shot peening

Lihua Zhu, Yanjin Guan, Hongyu Y. Zheng, Zongshen Wang, Jun Lin, Wenhui Yu, Jiqiang Zhai, Zhendong Xie

International Journal of Mechanical Sciences

DOI

2022

Study on Microstructure Evolution and Continuous Dynamic Recrystallization Constitutive Model of Dual-Phase Mg-Li Alloy LA103Z during Hot Deformation

Yi Li, Yanjin Guan, Ya Liu, Jiqiang Zhai, Jun Lin

Journal of Materials Engineering and Performance

DOI

2022

Effect of processing parameters on the microstructure and tensile properties of a dual-phase Mg–Li alloy during friction stir processing

Yi Li, Yanjin Guan, Ya Liu, Jiqiang Zhai, Kai Hu, Jun Lin

Journal of Materials Research and Technology

DOI

2021

模具清洁热处理过程的形性精确控制

张茂，张嘉城，谈发堂，王维，王新云，胡树兵，邓燕，王爱华，管延锦，翟月雯，曾琨

《锻压技术》

DOI

2021

超声振动辅助铆接精确成形

管延锦，解振东，胡国峰，翟继强

《锻压技术》

DOI

2021

限制模压变形和超声喷丸复合工艺对AZ31镁合金表层组织及硬度的影响

黄庆国，朱立华，王宗申，管延锦，陈浩，于从潇

《中国有色金属学报》

2021

Deformation behavior and microstructure in the low-frequency vibration upsetting of titanium alloy

Jun Lin, Catalin Iulian Pruncu, Lihua Zhu, Jiao Li, Yadi Zhai, Liang Chen, Yanjin Guan, Guoqun Zhao

Journal of Materials Processing Technology

DOI

2021

The surface effect of ultrasonic vibration in double cup extrusion test

Jiqiang Zhai, Yanjin Guan, Yi Li, Ya Liu, Jun Lin

Journal of Materials Processing Technology

DOI

2021

Effects of ultrasonic vibration on the deformation behavior of copper in micro-coining

Jiqiang Zhai, Yanjin Guan, Yi Li, Ya Liu, Jun Lin

The International Journal of Advanced Manufacturing Technology

DOI

2021

Effect of strain path on microstructure and mechanical properties of AZ31 magnesium alloy sheets processed by constrained groove pressing

Zongshen Wang, Tao Wang, Yanjin Guan, Lihua Zhu

Materials Science and Engineering A

DOI

2020

螺旋锥齿轮锻造成形过程数值模拟及其模具变形规律

李心蕊，邢彪，管延锦，任启华，杜晓晓，纪宝华

《锻压技术》

DOI

2020

基于正交试验的冷轧钢管模具设计参数优化

黄小康，晁特，管延锦

《锻压技术》

DOI

2020

基于雨课堂和BOPPPS模型的有效教学模式探索——以“材料物理化学”课程为例

董桂伟，赵国群，管延锦，王娟

《高等工程教育研究》

2020

基于BOPPPS模型的工科专业实验有效教学设计

董桂伟，管延锦，郑超

《黑龙江教育(高教研究与评估)》

2020

Effects of ultrasonic shot peening process parameters on nanocrystalline and mechanical properties of pure copper surface

Hu Chen, Yanjin Guan, Lihua Zhu, Yi Li, Jiqiang Zhai, Jun Lin

Materials Chemistry and Physics

DOI

2020

Influence of Surface Nanocrystallization and Partial Amorphization Induced by Ultrasonic Shot Peening on Surface Properties of 7075 Aluminum Alloy

Lihua Zhu, Yanjin Guan, Zongshen Wang, Hongyu Y. Zheng, Jun Lin, Jiqiang Zhai, Zhendong Xie

Journal of Materials Engineering and Performance

DOI

2020

Warm Tensile Deformation and Fracture Behavior of AZ31 Magnesium Alloy Sheets Processed by Constrained Groove Pressing

Zongshen Wang, Kangning Wang, Xiebin Wang, Tao Wang, Lihua Zhu, Yanjin Guan

Journal of Materials Engineering and Performance

DOI

2020

Bimodal Phenomenon of the Stress–Strain Curve During Hot Compression of LA43M Mg–Li Alloy

Yi Li, Yanjin Guan, Hu Chen, Jiqiang Zhai, Jun Lin, Liang Chen

Metals and Materials International

DOI

2020

Microstructure and Mechanical Properties of a Two‐Phase Mg–Li Alloy Processed By Constrained Groove Pressing

Zongshen Wang, Bin Zhang, Wei Zhou, Lihua Zhu, Hongyu Y. Zheng, Yanjin Guan, Wengang Zhai

Advanced Engineering Materials

DOI

2020

Investigation on ultrasonic vibration effects on plastic flow behavior of pure titanium: Constitutive modeling

Jun Lin, Jiao Li, Tao Liu, Zhendong Xie, Lihua Zhu, Yao Wang, Yanjin Guan

Journal of Materials Research and Technology

DOI

2020

Influence of Nanocrystalline–Amorphous Composite Layer on Tensile Properties of Pure Titanium

Lihua Zhu, Yanjin Guan, Zongshen Wang, Jun Lin, Jiqiang Zhai, Zhendong Xie

Journal of Materials Engineering and Performance

DOI

2020

Preform optimization of a brake drum part based on quasi-equipotential field and response surface methods

H u Chen, Yanjin Guan, Mujuan Liu, Y i Li, Jiqiang Zhai, Jun Lin

Procedia Manufacturing

DOI

2019

Hot Deformation Behavior of LA43M Mg-Li Alloy via Hot Compression Tests

Yi Li, Yanjin Guan, Jiqiang Zhai, Jun Lin

Journal of Materials Engineering and Performance

DOI

2019

Construction of Material Constitutive Relationship Based on Surface-Layer Model at Micro/Mesoscopic Scale

Jiqiang Zhai, Yanjin Guan, Weiguo Wang

MATERIALS TRANSACTIONS

DOI

2019

The Fracture Behavior and Thermal Stability of Commercially Pure Nickel Sheets Processed by Constrained Groove Pressing

Zongshen Wang, Yanjin Guan, Lin Li, Lihua Zhu

Metals

DOI

2019

Effects of lubrication and strain path on constrained groove pressing of commercially pure aluminum sheets

Zongshen Wang, Tao Wang, Yanjin Guan, Xiuting Wei, Xiaoying Fang, Guangming Zhu, Shan Gao

The International Journal of Advanced Manufacturing Technology

DOI

2019

The enhanced thermal stability of the nanocrystalline-amorphous composite layer on pure titanium induced by ultrasonic shot peening

Lihua Zhu, Yanjin Guan, Jun Lin, Jiqiang Zhai, Zhendong Xie

Journal of Alloys and Compounds

DOI

2019

Constitutive model of 6063 aluminum alloy under the ultrasonic vibration upsetting based on Johnson-Cook model

Zhendong Xie, Yanjin Guan, Jun Lin, Jiqiang Zhai, Lihua Zhu

Ultrasonics

DOI

2019

Microstructure and mechanical properties of AZ31 magnesium alloy sheets processed by constrained groove pressing

Zongshen Wang, Yanjin Guan, Tao Wang, Qian Zhang, Xiuting Wei, Xiaoying Fang, Guangming Zhu, Shan Gao

Materials Science and Engineering A

DOI

2018

限制模压变形制备超细晶纯铜板材及其耐腐蚀性能

王宗申，管延锦，崔惟春，方晓英，潘尧坤

《锻压技术》

2018

超临界流体辅助微孔发泡注塑技术及其熔体发泡行为

董桂伟，赵国群，管延锦，王桂龙，侯俊吉，吴昊

《机械工程学报》

2018

超声振动对AZ31镁合金拉伸变形过程中材料性能及微观组织影响的研究（英文）

解振东，管延锦，于晓慧，朱立华，林军

Journal of Central South University

2018

Studies on ultrasonic vibration-assisted coining of micro-cylinder

Jiqiang Zhai, Yanjin Guan, Wenxia Wang, Lihua Zhu, Zhendong Xie, Jun Lin

The International Journal of Advanced Manufacturing Technology

DOI

2018

Effects of ultrasonic vibration on performance and microstructure of AZ31 magnesium alloy under tensile deformation

Zhendong Xie, Yanjin Guan, Xiaohui Yu, Lihua Zhu, Jun Lin

Journal of Central South University

DOI

2018

A nanocrystalline-amorphous mixed layer obtained by ultrasonic shot peening on pure titanium at room temperature

Lihua Zhu, Yanjin Guan, Jun Lin, Jiqiang Zhai, Zhendong Xie

Ultrasonics Sonochemistry

DOI

2018

Effects of ultrasonic vibration on the compression of pure titanium

Tao Liu, Jun Lin, Yanjin Guan, Zhendong Xie, Lihua Zhu, Jiqiang Zhai

Ultrasonics

DOI

2018

Investigations on the surface effect of ultrasonic vibration-assisted 6063 aluminum alloy ring upsetting

Zhendong Xie, Yanjin Guan, Lihua Zhu, Jiqiang Zhai, Jun Lin, Xiaohui Yu

The International Journal of Advanced Manufacturing Technology

DOI

2017

钛合金超声振动塑性成形技术研究现状

刘涛，林军，管延锦，解振东，朱立华，翟继强

《精密成形工程》

2017

模具限制作用对工业纯铜模压变形影响的实验与理论研究

王宗申，管延锦，魏修亭，朱光明

《塑性工程学报》

2017

基于类等势场和响应面法的复杂锻件预成形优化设计

刘目娟，翟继强，林军，管延锦

《精密成形工程》

2017

模压变形工艺及其研究进展

王宗申，管延锦，魏修亭，朱光明

《河北科技大学学报》

2017

Groove pressing and its research progress

Zongshen Wang, Yanjin Guan, Xiuting Wei, Guangming Zhu

DOAJ (DOAJ: Directory of Open Access Journals)

DOI

2017

Influence of process parameters of ultrasonic shot peening on surface roughness and hydrophilicity of pure titanium

Lihua Zhu, Yanjin Guan, Yanjie Wang, Zhendong Xie, Jun Lin, Jiqiang Zhai

Surface and Coatings Technology

DOI

2017

Study on ultrasonic vibration assisted upsetting of 6063 aluminum alloy

Zhendong Xie, Yanjin Guan, Jiqiang Zhai, Lihua Zhu, Chong-Kai Zhong

Procedia Engineering

DOI

2017

A Feeding Strategy in Inner L‐Shape Ring Hot Rolling Process

Wen Hua Meng, Feifan Wang, Yanjin Guan

Mathematical Problems in Engineering

DOI

2016

汽车前桥空心短轴的热挤压成形工艺数值模拟研究

韦国强，管延锦，朱立华，解振东，孙德朋

《现代制造技术与装备》

2016

涂层刀具切削淬硬H13模具钢的切削性能研究

杜劲，刘战强，张静婕，郝广超，管延锦

《工具技术》

2016

Influence of process parameters of ultrasonic shot peening on surface nanocrystallization and hardness of pure titanium

Lihua Zhu, Yanjin Guan, Yanjie Wang, Zhendong Xie, Jun Lin

The International Journal of Advanced Manufacturing Technology

DOI

2015

基于ANSYS Workbench的超声振动系统设计与优化

解振东，管延锦，朱立华，姜良斌，仲崇凯

《锻压技术》

2015

金属超声振动塑性成形技术研究现状及其发展趋势

仲崇凯，管延锦，姜良斌，解振东

《精密成形工程》

2015

Constitutive equation and processing maps of an Al–Mg–Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles

Yuanyuan Dong, Cunsheng Zhang, Guoqun Zhao, Yanjin Guan, Anjiang Gao, Wenchao Sun

Materials & Design

DOI

2015

Erratum to “State-of-the-art of extrusion welding and proposal of a method to evaluate quantitatively welding quality during three-dimensional extrusion process” [Mater. Des. 89 (2015) 737–48]

Xing Lu, Cunsheng Zhang, Guoqun Zhao, Yanjin Guan, Liang Chen, Anjiang Gao

Materials & Design

DOI

2015

State-of-the-art of extrusion welding and proposal of a method to evaluate quantitatively welding quality during three-dimensional extrusion process

Xing Lu, Cunsheng Zhang, Gunqun Zhao, Yanjin Guan, Liang Chen, Anjiang Gao

Materials & Design

DOI

2015

Preform design in forging process of complex parts by using quasi-equipotential field and response surface methods

Yanjin Guan, Xue Yuan Bai, Mujuan Liu, Libin Song, Guoqun Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2014

纯铝板材限制模压变形强化后的热稳定性

王宗申，管延锦，姜良斌

《材料热处理学报》

2014

Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections

Cunsheng Zhang, Guoqun Zhao, Yanjin Guan, Anjiang Gao, Lanjun Wang, Peng Li

The International Journal of Advanced Manufacturing Technology

DOI

2014

Influences of die structure on constrained groove pressing of commercially pure Ni sheets

Zongshen Wang, Yanjin Guan, Guangchun Wang, Chong-Kai Zhong

Journal of Materials Processing Technology

DOI

2014

The Optimal Design for Ring Blank Dimensions in Inner L-Shaped Ring Rolling Process

Wen Hua Meng, Guo Qun Zhao, Yanjin Guan

Applied Mechanics and Materials

DOI

2014

The Effect of the Initial Temperature of Ring Blank on Conical Ring Rolling Process

Wen Hua Meng, Guo Qun Zhao, Yanjin Guan

Applied Mechanics and Materials

DOI

2014

Die optimization design and experimental study of a large wallboard aluminum alloy profile used for high-speed train

Guoqun Zhao, Hao Chen, Cunsheng Zhang, Yanjin Guan, Anjiang Gao, Li Peng

The International Journal of Advanced Manufacturing Technology

DOI

2014

Effects of Friction on Constrained Groove Pressing of Pure Al Sheets

Zong Shen Wang, Yanjin Guan, Chong-Kai Zhong

Advanced materials research

DOI

2014

A Mandrel Feeding Strategy in Conical Ring Rolling Process

Wen Hua Meng, Guoqun Zhao, Yanjin Guan

Mathematical Problems in Engineering

DOI

2014

3D Preform Design in Forging Process based on Quasi-quipotential Field and Response Surface Methods

Yanjin Guan, Xue Bai, Mujuan Liu, Libin Song, Guoqun Zhao

Procedia Engineering

DOI

2014

The Effects of Forming Parameters on Conical Ring Rolling Process

Wen Hua Meng, Guoqun Zhao, Yanjin Guan

The Scientific World JOURNAL

DOI

2013

电加热快速热循环注塑模具热响应分析研究

王家昌，陈良，王桂龙，赵国群，管延锦

《模具技术》

2013

Deformation efficiency, homogeneity, and electrical resistivity of pure copper processed by constrained groove pressing

Zongshen Wang, Yanjin Guan, Ping Liang

Rare Metals

DOI

2013

Multiobjective optimization design of porthole extrusion die using Pareto-based genetic algorithm

Guoqun Zhao, Hao Chen, Cunsheng Zhang, Yanjin Guan

The International Journal of Advanced Manufacturing Technology

DOI

2013

Effect of Process Parameters on Die Wear Behavior of Aluminum Alloy Rod Extrusion

Tingting Li, Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, Xuemei Sun, Hengkui Li

Materials and Manufacturing Processes

DOI

2013

Optimal Design of Second-Step Welding Chamber for a Condenser Tube Extrusion Die Based on the Response Surface Method and the Genetic Algorithm

Xuemei Sun, Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, Anjiang Gao

Materials and Manufacturing Processes

DOI

2013

Process modeling and die optimization design of aluminum alloy extrusion profiles used in high-speed train

Guoqun Zhao, Xuemei Sun, Cunsheng Zhang, Hao Chen, Yanjin Guan

AIP conference proceedings

DOI

2013

Finite Element Analysis and Deformation Homogeneity Optimization of Constrained Groove Pressing

Zong Shen Wang, Yanjin Guan, Li Song, Ping Liang

Applied Mechanics and Materials

DOI

2012

Investigation on Effects of Die Orifice Layout on Three-Hole Porthole Extrusion of Aluminum Alloy 6063 Tubes

Cunsheng Zhang, Guoqun Zhao, Hao Chen, Yanjin Guan, Haijin Cai, Gao Baojie

Journal of Materials Engineering and Performance

DOI

2012

Process simulation and optimization of laser tube bending

Yanjin Guan, Guiping Yuan, Sheng Sun, Guoqun Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2011

基于有限元分析技术的等强度轮辋设计研究

张红梅，王翔，王宗申，管延锦

《现代制造技术与装备》

2011

Numerical Simulation of Extrusion Process and Die Structure Optimization for a Complex Aluminum Multicavity Wallboard of High-Speed Train

Hao Chen, Guoqun Zhao, Cunsheng Zhang, Yanjin Guan, Hui Liu, Funjun Kou

Materials and Manufacturing Processes

DOI

2011

Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis

Cunsheng Zhang, Guoqun Zhao, Hao Chen, Yanjin Guan, Hengkui Li

The International Journal of Advanced Manufacturing Technology

DOI

2011

Numerical simulation and metal flow analysis of hot extrusion process for a complex hollow aluminum profile

Cunsheng Zhang, Guoqun Zhao, Hao Chen, Yanjin Guan, Fujun Kou

The International Journal of Advanced Manufacturing Technology

DOI

2011

Thermal and stress analysis of rapid electric heating injection mold for a large LCD TV panel

Xiping Li, Ningning Gong, Yanjin Guan, Guangming Cheng

Applied Thermal Engineering

DOI

2011

Laser micro-bending process based on the characteristic of the laser polarization

Yanjin Guan, Hongmei Zhang, Jie Liu, Shen Hue Sun

Journal of Materials Processing Technology

DOI

2011

Design of a Multihole Porthole Die for Aluminum Tube Extrusion

Yanjin Guan, Cunsheng Zhang, Guoqun Zhao, Xuemei Sun, Peng Li

Materials and Manufacturing Processes

DOI

2011

Fully Coupled Transient Heat Transfer and Melt Filling Simulations in Rapid Heat Cycle Molding with Steam Heating

Jitao Liu, Guoqun Zhao, Guilong Wang, Yanjin Guan

Polymer-Plastics Technology and Engineering

DOI

2011

Multi-objective optimization design of the heating/cooling channels of the steam-heating rapid thermal response mold using particle swarm optimization

Guilong Wang, Guoqun Zhao, Huiping Li, Yanjin Guan

International Journal of Thermal Sciences

DOI

2011

Optimisation design of aluminium radiator extrusion die using response surface method

Changsheng Zhang, Guoqun Zhao, Hongye Chen, Yanjin Guan

Materials Research Innovations

DOI

2010

薄壁空心铝型材挤压过程数值模拟及模具优化

陈浩，赵国群，张存生，管延锦

《机械工程学报》

2010

注塑模热流道板温度场数值模拟及优化设计

李姣，李熹平，管延锦，赵国群，李磊，王小新

《锻压技术》

2010

管材激光成形的数值模拟研究

袁桂平，管延锦

《机械研究与应用》

2010

基于UG的轮辋参数化标准件库的设计与开发

王翔，王宗申，李姣，孔贝贝，管延锦

《现代制造技术与装备》

2010

Numerical Study on Influences of Process Parameters on Laser Tube Bending

Yanjin Guan, Hongmei Zhang, Sheng Sun, Guo Qun Zhao

Advanced materials research

DOI

2010

Research on rigid/visco-plastic element-free Galerkin method and key simulation techniques for three-dimensional bulk metal forming processes

Ping Lu, Guoqun Zhao, Yanjin Guan, Xin Wu

The International Journal of Advanced Manufacturing Technology

DOI

2010

Research on optimum heating system design for rapid thermal response mold with electric heating based on response surface methodology and particle swarm optimization

Guilong Wang, Guoqun Zhao, Yanjin Guan

Journal of Applied Polymer Science

DOI

2010

Three-dimensional thermal response and thermo-mechanical fatigue analysis for a large LCD TV frame mould in steam-assisted rapid heat cycle moulding

G.-L. Wang, Guoqun Zhao, Yanjin Guan, H.-P. LI

Fatigue & Fracture of Engineering Materials & Structures

DOI

2010

Multi-Objective Optimization of the Heating Rods Layout for Rapid Electrical Heating Cycle Injection Mold

Guoqun Zhao, Xiping Li, Yanjin Guan

Journal of Mechanical Design

DOI

2010

Coupled Simulation of Plastic Part and Mold Temperatures in the Filling Process of Rapid Heat Cycle Injection Molding

Ji Tao Liu, Guo Qun Zhao, Yanjin Guan, Gui Long Wang

Advanced materials research

DOI

2010

Parametric Design and Development of Rim Library Based on UG

Yanjin Guan

Modern Manufacturing Technology and Equipment

2009

快速热循环注塑技术的研究与应用

赵国群，王桂龙，李辉平，管延锦

《塑性工程学报》

2009

快速热循环注塑模具加热与冷却过程分析及其结构优化设计

李熹平，赵国群，管延锦，李辉平

《塑性工程学报》

2009

变模温注塑技术的研究与应用分析

王桂龙，赵国群，李辉平，管延锦

《现代化工》

2009

蒸气辅助快速热循环注塑技术及模温响应模拟

王桂龙，赵国群，李辉平，管延锦

《高分子材料科学与工程》

2009

基于CAE的大型LCD注塑面板变模温设计与分析

王桂龙，赵国群，李辉平，管延锦

《材料工程》

2009

激光偏振特性在微尺度工件激光弯曲成形中的作用

刘杰，孙胜，管延锦

《西安交通大学学报》

2009

3D Finite Element Simulation of Transient Temperature Field for Rapid Electrical Heating Cycle Injection Mold

Xi Ping Li, Guo Qun Zhao, Yanjin Guan

Advanced materials research

DOI

2009

Application of Rigid/Visco-Plastic Element Free Galerkin Method in Three-Dimensional Bulk Metal Forming Processes

Ping Lu, Xin Wu, Guo Qun Zhao, Kai Yong Jiang, Yanjin Guan

Key engineering materials

DOI

2009

Experimental study on negative laser bending process of steel foils

Jie Liu, Sheng Sun, Yanjin Guan, Zhong Ji

Optics and Lasers in Engineering

DOI

2009

Research and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels

Guoqun Zhao, Guilong Wang, Yanjin Guan, Huiping Li

Polymers for Advanced Technologies

DOI

2009

Multi‐objective optimization of heating channels for rapid heating cycle injection mold using Pareto‐based genetic algorithm

Xi‐Ping Li, Guoqun Zhao, Yanjin Guan, Ming‐Xing Ma

Polymers for Advanced Technologies

DOI

2009

Research of thermal response simulation and mold structure optimization for rapid heat cycle molding processes, respectively, with steam heating and electric heating

Guilong Wang, Guoqun Zhao, Huiping Li, Yanjin Guan

Materials & Design (1980-2015)

DOI

2009

Research on a New Variotherm Injection Molding Technology and its Application on the Molding of a Large LCD Panel

Guilong Wang, Guoqun Zhao, Huiping Li, Yanjin Guan

Polymer-Plastics Technology and Engineering

DOI

2009

Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm

Xiping Li, Guoqun Zhao, Yanjin Guan, Ming‐Xing Ma

Materials & Design (1980-2015)

DOI

2009

Research on thermal stress, deformation, and fatigue lifetime of the rapid heating cycle injection mold

Xiping Li, Guoqun Zhao, Yanjin Guan, Huiping Li

The International Journal of Advanced Manufacturing Technology

DOI

2009

Research and application of rapid heating cycle molding technology

Yanjin Guan

Suxing gongcheng xuebao

2009

Experimental Study on Laser Polarization Properties in Laser Micro-Bending Processes

Yanjin Guan

Xi'an Jiaotong Daxue xuebao

2009

Study of variotherm injection molding technology and analysis on its application

Yanjin Guan

Xiandai huagong

2009

Steam-Assisted Rapid Heat Cycle Molding and Simulation of Temperature Response of the Mold

Yanjin Guan

Gaofenzi cailiao kexue yu gongcheng

2008

等径角挤压工艺的无网格数值模拟研究

管延锦，赵国群，路平，曹伟，吴欣

《塑性工程学报》

2008

刚塑性无网格伽辽金方法近似方案研究

吴欣，赵国群，徐淑波，管延锦

《塑性工程学报》

2008

改进的无网格伽辽金方法及其在三维金属体积成形中的应用研究

路平，赵国群，管延锦，吴欣

《塑性工程学报》

2008

有限元模拟在汽车转向节锻造设计中的应用

程联军，赵国群，管延锦，杨建华

《锻压装备与制造技术》

2008

微尺度激光弯曲成形数值模拟与实验研究

刘杰，孙胜，管延锦

《中国激光》

2008

预应力作用下微尺度激光弯曲成形的数值模拟

刘杰，孙胜，管延锦

《中国激光》

2008

摩擦条件对圆环镦粗变形规律影响的无网格伽辽金数值模拟研究

路平，赵国群，管延锦，程联军

《锻压装备与制造技术》

2008

圆柱体镦粗过程无网格伽辽金法数值模拟技术的研究

曹伟，管延锦，李修纲，袁洋

《锻压装备与制造技术》

2008

滚珠轴承套圈冷辗扩成形过程的数值模拟研究

张夕凤，管延锦

《锻压装备与制造技术》

2008

Influence of beam polarisation in laser bending process

J. Liu, Shengjiang Sun, Yanjin Guan

Materials Science and Technology

DOI

2008

Numerical investigation on the laser bending of stainless steel foil with pre-stresses

Jie Liu, Sheng Sun, Yanjin Guan

Journal of Materials Processing Technology

DOI

2008

Releasing Algorithm for Volumetric Locking in Metal Forming Process Simulation Based on Element-Free Galerkin Method

Yanjin Guan, Xin Wu, Guo Qun Zhao, Ping Lu

Materials science forum

DOI

2008

Process Optimization of Laser Micro-Bending Using iSIGHT

Jie Liu, Yanjin Guan, Sheng Sun, Guang Chun Wang

Materials science forum

DOI

2008

Numerical study of equal-channel angular pressing based on the element-free Galerkin method

Yanjin Guan, Zhao Guoqun, Lü Ping

Suxing gongcheng xuebao

2008

Numerical Simulation Study on Cold Rolling Process of Ball Bearing Rings

Yanjin Guan

China Metal Forming Equipment & Manufacturing Technology

2007

反向挤压过程无网格伽辽金热力耦合分析

吴欣，赵国群，管延锦，路平，马新武

《工程力学》

2007

箔材激光弯曲成形的有限元模拟

刘杰，孙胜，管延锦

《华中科技大学学报(自然科学版)》

2007

Bulk metal forming process simulation based on rigid-plastic/viscoplastic element free Galerkin method

Ping Lu, Guoqun Zhao, Yanjin Guan, Xin Wu

Materials Science and Engineering A

DOI

2007

Numerical investigation of aluminum deformation behavior in three-dimensional continuous confined strip shearing process

Shubo Xu, Guoqun Zhao, Xufang Ren, Yanjin Guan

Materials Science and Engineering A

DOI

2007

Three-dimensional numerical analysis and experimental investigation of grain refinement in multi-pass equal channel angular pressing for round-workpieces

Shubo Xu, Guoqun Zhao, Xin Wu, Xinwu Ma, Yanjin Guan

Frontiers of Materials Science in China

DOI

2007

Massive metal forming process simulation based on rigid/visco-plastic element-free Galerkin method

Yanjin Guan, Guoqun Zhao, Xin Wu, Ping Lu

Journal of Materials Processing Technology

DOI

2007

Progress in the study on thermal analysis of rolling tire

Yanjin Guan

China Elastomerics

2006

稳态挤压过程刚塑性无网格伽辽金方法分析

吴欣，赵国群，管延锦，路平

《塑性工程学报》

2006

刚塑性无网格方法中精度影响因素的研究

赵国群，吴欣，管延锦

《塑性工程学报》

2006

管材激光弯曲成形有限元工艺仿真及其机理研究

管延锦，孙胜，赵国群

《应用激光》

2006

Grain refinement mechanism analysis and experimental investigation of equal channel angular pressing for producing pure aluminum ultra-fine grained materials

Guoqun Zhao, Shubo Xu, Luan Yiguo, Yanjin Guan, Ning Lun, Xufang Ren

Materials Science and Engineering A

DOI

2006

Numerical studies on processing routes and deformation mechanism of multi-pass equal channel angular pressing processes

Shubo Xu, Guoqun Zhao, Luan Yiguo, Yanjin Guan

Journal of Materials Processing Technology

DOI

2006

Factors affecting computational precision of the rigid-plastic meshless method

Yanjin Guan

Suxing gongcheng xuebao

2004

管材激光弯曲成形有限元工艺仿真的技术处理研究

管延锦，张建华，赵国群，孙胜

《应用激光》

2004

扫描次数对板料激光弯曲成形影响的有限元仿真研究

管延锦，赵国群，孙胜，张建华

《航空制造技术》

2004

材料性能参数与板料激光弯曲成形角度的相关性研究

管延锦，孙胜，赵国群，栾贻国

《中国激光》

2004

板料激光弯曲成形角度的解析研究

管延锦，孙胜，栾贻国，赵国群

《光电子·激光》

2004

Influence of material properties on the laser-forming process of sheet metals

Yanjin Guan, Sheng Sun, Guoqun Zhao, Luan Yiguo

Journal of Materials Processing Technology

DOI

2004

Effective factors on wear resistance of radial tire

Yanjin Guan

China Rubber Industry

2004

Experiment study on load performances of radial tire

Yanjin Guan

China Elastomerics

2003

激光能量密度对激光弯曲成形的影响

管延锦，孙胜，赵国群，栾贻国

《应用激光》

2003

产品/模具快速制造技术在电器行业的应用

李辉平，管延锦，赵国群，吴向红

《新技术新工艺》

2003

基于反求工程和激光快速成型技术的新型车轮开发

管延锦，赵国群，李辉平，王广春，宋志俭

《机械设计与研究》

2003

反求工程及其相关技术

栾贻国，李海峰，唐炳涛，管延锦

《山东大学学报(工学版)》

2002

板料三维激光成形研究

管延锦，孙胜，栾贻国

《应用激光》

2002

预约束应力作用下的激光弯曲成形仿真工艺研究

管延锦，孙胜，赵国群，李辉平

《中国激光》

2002

激光弯曲成形对板料组织与性能的影响

管延锦，张红梅，张守云

《汽车工艺与材料》

2001

闭式数控回转头压力机机身模态分析

季忠，管延锦，刘韧

《重型机械》

2000

双击式新型直接电动螺旋压力机

管延锦，高军，李培武

《重型机械》

2000

复合弯曲成形的有限元分析及过程仿真

管延锦

《汽车工艺与材料》

精选作品

期刊论文

Numerical study on stress distribution and failure behavior in the riveted joint of CF/PEEK composite and 2A12 aluminum alloy

Mechanical degradation and corrosion behavior of low-frequency vibration assisted riveted CFRP/Al joints

Bimodal surface hardening of CoCrFeNiMn high-entropy alloy enabled by wide-temperature-range ultrasonic shot peening: Process mechanisms and property control

Thermo-forging CF/PPS rivet for joining CF/PEEK composite and TC4 titanium alloy structures

Study on ultrasonic micro-forging with ball-head on microstructure and mechanical properties of 316 L stainless steel produced by directed energy deposition

基于类等势场法的TB6钛合金药型罩温挤压成形工艺优化

Energy-saving low-frequency vibration-assisted riveting process for joining high-strength metallic structures with enhanced performance

The influence of ultrasonic shot peening on the microstructure and mechanical properties of the ultra-lightweight LA103Z alloy

Enhancement of surface hardening of β phase Mg-Li alloy through nanocrystallization and amorphization by warm ultrasonic shot peening

风电塔筒滚弯成形数学建模及实验研究

Low-frequency vibration assisted self-pierce riveting (LV-SPR) of carbon fiber reinforced composite and aluminum alloy

模具钢的高温变形行为及本构模型的建立

激光热处理对7CrSiMnMoV模具钢组织与性能的影响

超声振动辅助微压印成形及其作用机制

面向“卓越工程2.0”的工科专业基础课程多元协同教学模式研究

Molecular dynamics study on surface effect in ultrasonic vibration assisted upsetting of monocrystalline copper

Macroscopic mechanism of ultrasonic vibration in ultrasonic-assisted metal forming

Modification of the surface layer model and establishment of the surface layer thickness model of pure copper

Investigation of microstructure evolution and mechanical properties of 2A10 aluminum alloy during ultrasonic vibration plastic forming

GGG70L球墨铸铁的高温变形行为及其本构模型建立

互联网+背景下面向材料类复合型人才培养的实验教学改革与实践

工科基础课程的课程思政建设路径——以材料物理化学为例

Microstructure and tensile properties of the friction stir processed LA103Z alloy

Experimental study on friction stir modification of LA103Z Mg-Li alloy

Plastic deformation behavior of Ti45Nb in ultrasonic vibration-assisted compression

Effect on microstructure and properties of LA103Z Mg–Li alloy plate by multi-pass friction stir processing

Molecular dynamics study of acoustic softening effect in ultrasonic vibration assisted tension of monocrystalline/polycrystalline coppers

A new analytical model to predict residual stress induced by ultrasonic shot peening

Study on Microstructure Evolution and Continuous Dynamic Recrystallization Constitutive Model of Dual-Phase Mg-Li Alloy LA103Z during Hot Deformation

Effect of processing parameters on the microstructure and tensile properties of a dual-phase Mg–Li alloy during friction stir processing

模具清洁热处理过程的形性精确控制

超声振动辅助铆接精确成形

限制模压变形和超声喷丸复合工艺对AZ31镁合金表层组织及硬度的影响

Deformation behavior and microstructure in the low-frequency vibration upsetting of titanium alloy

The surface effect of ultrasonic vibration in double cup extrusion test

Effects of ultrasonic vibration on the deformation behavior of copper in micro-coining

Effect of strain path on microstructure and mechanical properties of AZ31 magnesium alloy sheets processed by constrained groove pressing

螺旋锥齿轮锻造成形过程数值模拟及其模具变形规律

基于正交试验的冷轧钢管模具设计参数优化

基于雨课堂和BOPPPS模型的有效教学模式探索——以“材料物理化学”课程为例

基于BOPPPS模型的工科专业实验有效教学设计

Effects of ultrasonic shot peening process parameters on nanocrystalline and mechanical properties of pure copper surface

Influence of Surface Nanocrystallization and Partial Amorphization Induced by Ultrasonic Shot Peening on Surface Properties of 7075 Aluminum Alloy

Warm Tensile Deformation and Fracture Behavior of AZ31 Magnesium Alloy Sheets Processed by Constrained Groove Pressing

Bimodal Phenomenon of the Stress–Strain Curve During Hot Compression of LA43M Mg–Li Alloy

Microstructure and Mechanical Properties of a Two‐Phase Mg–Li Alloy Processed By Constrained Groove Pressing

Investigation on ultrasonic vibration effects on plastic flow behavior of pure titanium: Constitutive modeling

Influence of Nanocrystalline–Amorphous Composite Layer on Tensile Properties of Pure Titanium

Preform optimization of a brake drum part based on quasi-equipotential field and response surface methods

Hot Deformation Behavior of LA43M Mg-Li Alloy via Hot Compression Tests

Construction of Material Constitutive Relationship Based on Surface-Layer Model at Micro/Mesoscopic Scale

The Fracture Behavior and Thermal Stability of Commercially Pure Nickel Sheets Processed by Constrained Groove Pressing

Effects of lubrication and strain path on constrained groove pressing of commercially pure aluminum sheets

The enhanced thermal stability of the nanocrystalline-amorphous composite layer on pure titanium induced by ultrasonic shot peening

Constitutive model of 6063 aluminum alloy under the ultrasonic vibration upsetting based on Johnson-Cook model

Microstructure and mechanical properties of AZ31 magnesium alloy sheets processed by constrained groove pressing

限制模压变形制备超细晶纯铜板材及其耐腐蚀性能

超临界流体辅助微孔发泡注塑技术及其熔体发泡行为

超声振动对AZ31镁合金拉伸变形过程中材料性能及微观组织影响的研究（英文）

Studies on ultrasonic vibration-assisted coining of micro-cylinder

Effects of ultrasonic vibration on performance and microstructure of AZ31 magnesium alloy under tensile deformation

A nanocrystalline-amorphous mixed layer obtained by ultrasonic shot peening on pure titanium at room temperature

Effects of ultrasonic vibration on the compression of pure titanium

Investigations on the surface effect of ultrasonic vibration-assisted 6063 aluminum alloy ring upsetting

钛合金超声振动塑性成形技术研究现状

模具限制作用对工业纯铜模压变形影响的实验与理论研究

基于类等势场和响应面法的复杂锻件预成形优化设计

模压变形工艺及其研究进展

Groove pressing and its research progress

Influence of process parameters of ultrasonic shot peening on surface roughness and hydrophilicity of pure titanium

Study on ultrasonic vibration assisted upsetting of 6063 aluminum alloy

A Feeding Strategy in Inner L‐Shape Ring Hot Rolling Process

汽车前桥空心短轴的热挤压成形工艺数值模拟研究

涂层刀具切削淬硬H13模具钢的切削性能研究

Influence of process parameters of ultrasonic shot peening on surface nanocrystallization and hardness of pure titanium

基于ANSYS Workbench的超声振动系统设计与优化

金属超声振动塑性成形技术研究现状及其发展趋势

Constitutive equation and processing maps of an Al–Mg–Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles