佟金

期刊论文

1. Xu Tang, Jin Tong, Lining Wang, Wei Tong Hu, Daxin Liu, Chunsheng Yu, Shengwang Yuan, Yunhai Ma, Jian Zhuang (2023). Study on the mechanism of expanded graphite to improve the fading resistance of the non-asbestos organic composite braking materials. Tribology International.DOI
2. Yucheng Liu, Xiangxiao Gui, Junwei Li, Zhou Song, Yihao Wang, Weidong Jia, Aiping Shi, Qizhi Yang, Mingxiong Ou, Yunhai Ma, Jin Tong (2023). Influence of CSF/GF ratio on tribological behavior of hybrid fiber-reinforced braking friction materials. Tribology International.DOI
3. Lekai Li, Zichao Ma, Guoqin Liu, Jin Tong, Wei Song, Lili Ren, Tianjian Tong, Yunhai Ma (2023). Effect of Polymer Ether Ketone Fibers on the Tribological Properties of Resin-Based Friction Materials. Materials.DOI
4. Lekai Li, Jian Zhuang, Tianjian Tong, Jin Tong, Zhao Xucheng, Feipeng Cao, Wei Song, Donghai Wang, Yitong Tian, Yunhai Ma, Dongyu Chen, Qifeng Zhang (2023). Effect of Wet Granulation on Tribological Behaviors of Cu-Based Friction Materials. Materials.DOI
5. Wei Song, Xiao-Hu Jiang, Le-Kai Li, Li-Li Ren, Jin Tong (2022). Increasing the width of disturbance of plough pan with bionic inspired subsoilers. Soil & Tillage Research.DOI
6. Xu Tang, Jian Zhuang, Tianjian Tong, Lining Wang, Wei Tong Hu, Daxin Liu, Chunsheng Yu, Jin Tong, Shengwang Yuan, Yunhai Ma (2022). Tribological Properties and Mechanism of Rice Husk Carbon Reinforced Non-Asbestos Organic Braking Composite Material. Tribology Transactions.DOI
7. Lekai Li, Guixiong Gao, Jin Tong, Jian Zhuang, Wei Song, Yunhai Ma, Guoqin Liu, Feipeng Cao, Shengwang Yuan, Qifeng Zhang (2022). Tribological and mechanical behaviours of resin‐based friction materials based on microcrack filling. Biosurface and Biotribology.DOI
8. Wei Hua Song, Qingzhu Zhang, Yuxin Guan, Wanyan Li, Siyu Xie, Jin Tong, Mo Li, Lili Ren (2022). Synthesis and Characterization of Porous Chitosan/Saccharomycetes Adsorption Microspheres. Polymers.DOI
9. Yucheng Liu, Weidong Jia, Qizhi Yang, Yunhai Ma, Jin Tong, Aiping Shi, Sanjay Mavinkere Rangappa, Suchart Siengchin (2022). Physical, Mechanical, and Environmental Properties of Corn Stalk Fiber Reinforced Braking Composites Prepared by Wet Granulation. Journal of Natural Fibers.DOI
10. 张智泓，甘帅汇，左国标，佟金（2021）. 以砂鱼蜥头部为原型的仿生深松铲尖设计与离散元仿真. 《农业机械学报》.
11. 佟金，高子博，霍超，王子阳，马云海，常志勇（2021）. 低温下铜纳米颗粒对UHMWPE复合材料摩擦磨损性能影响. 《吉林大学学报(工学版)》.DOI
12. Yu-Wan Yang, Jin Tong, Yu-Xiang Huang, Jin-Guang Li, Xiao-Hu Jiang (2021). Impact of the multi-claw combination on the soil-cutting performance of Scaptochirus moschatus (Mammalia, Soricomorpha, Talpidae). Rendiconti Lincei SCIENZE FISICHE E NATURALI.DOI
13. Hubiao Wang, Guixiong Gao, Yunhai Ma, Hongwei Zhao, Bharat Bhushan, Jin Tong (2021). Wear Properties of Self-Fluxing Ni60A–AlMgB14 Composite Coating Fabricated by Plasma Spraying. MATERIALS TRANSACTIONS.DOI
14. Yuwan Yang, Jin Tong, Yuxiang Huang, Jinguang Li, Xiaohu Jiang (2021). Biomimetic Rotary Tillage Blade Design for Reduced Torque and Energy Requirement. Applied Bionics and Biomechanics.DOI
15. Zelai Song, Yichen Wang, Wen Li, Yuchao Zhan, Pengpeng Li, Yongwei Yan, Jin Tong, Jiyu Sun (2021). Bionic deployable wing design based on Asian ladybird beetle. IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO).DOI
16. Qingzhu Zhang, Guobiao Zuo, Qinghui Lai, Jin Tong, Zhi Hong Zhang (2021). EDEM Investigation and Experimental Evaluation of Abrasive Wear Resistance Performance of Bionic Micro-Thorn and Convex Hull Geometrically Coupled Structured Surface. Applied Sciences.DOI
17. Zelai Song, Jin Tong, Wilhelm Pfleging, Jiyu Sun (2021). A review: Learning from the flight of beetles. Computers in Biology and Medicine.DOI
18. Zelai Song, Jin Tong, Yongwei Yan, Limei Tian, Jiyu Sun (2021). The rigidizable behavior of the deployable hindwings of the Asian ladybeetle during flight. Journal of Materials Science.DOI
19. Baoguang Wu, Ruize Zhang, Pengfei Hou, Jin Tong, Deyi Zhou, Haiye Yu, Qiang Zhang, Jinsong Zhang, Yuelin Xin (2021). Bionic Nonsmooth Drag Reduction Mathematical Model Construction and Subsoiling Verification. Applied Bionics and Biomechanics.DOI
20. Jian Hua Xu, Wei Song, Nan Wu, Jin Tong, Lili Ren (2021). Preparation and characterization of chitosan/polyvinyl porous alcohol aerogel microspheres with stable physicochemical properties. International Journal of Biological Macromolecules.DOI
21. Wei Hua Song, Jian Hua Xu, Lepeng Gao, Qingzhu Zhang, Jin Tong, Lili Ren (2021). Preparation of Freeze-Dried Porous Chitosan Microspheres for the Removal of Hexavalent Chromium. Applied Sciences.DOI
22. 张清珠，李兵，魏玉兰，徐云杰，张金波，李默，佟金（2020）. 仿生镇压辊压实性能的有限元分析与试验验证. 《农机化研究》.DOI
23. 张清珠，李默，张金波，李兵，魏玉兰，徐云杰，佟金，张智泓（2020）. 仿生多面体型几何结构镇压辊的设计与试验. 《农机化研究》.DOI
24. Junwei Li, Xiaohu Jiang, Yunhai Ma, Jin Tong, Bin Hu (2020). Bionic Design of a Potato Digging Shovel with Drag Reduction Based on the Discrete Element Method (DEM) in Clay Soil. Applied Sciences.DOI
25. Zelai Song, Jin Tong, Yongwei Yan, Wei Wu, Jiyu Sun (2020). Effects of microfluid in the veins of the deployable hindwings of the Asian ladybeetle on flight performance. Computers in Biology and Medicine.DOI
26. Haoming Wang, X.T. Liu, Jiaxin Che, He Zhao, Bharat Bhushan, Jin Tong, J. Zhuang, Y.H. Ma (2020). Analysis of abnormal wear on a certain type of CRH380 high‐speed railway grounding brush. Materialwissenschaft und Werkstofftechnik.DOI
27. Jiyu Sun, Yueming Wang, Shujun Zhang, Yunhai Ma, Jin Tong, Zhi‐Jun Zhang (2020). The mechanism of resistance-reducing/anti-adhesion and its application on biomimetic disc furrow opener. Mathematical Biosciences & Engineering.DOI
28. Zelai Song, Jin Tong, Yongwei Yan, Wei Wu, Limei Tian, Jiyu Sun (2020). Combined effects of wrinkled vein structures and nanomechanical properties on hind wing deformation. Micron.DOI
29. Wei Hua Song, Jian Hua Xu, Lili Ren, Guo Li, Jin Tong, Liyan Wang, Zhiyong Chang (2020). Traditional Sensory Evaluation and Bionic Electronic Nose as Innovative Tools for the Packaging Performance Evaluation of Chitosan Film. Polymers.DOI
30. Jin Tong, Xiaohu Jiang, Yueming Wang, Yunhai Ma, Junwei Li, Jiyu Sun (2020). Tillage force and disturbance characteristics of different geometric-shaped subsoilers via DEM. Advances in Manufacturing.DOI
31. Zelai Song, Yongwei Yan, Jin Tong, Jiyu Sun (2020). Asian ladybird folding and unfolding of hind wing: biomechanical properties of resilin in affecting the tensile strength of the folding area. Journal of Materials Science.DOI
32. 李俊伟，佟金，胡斌，王虎彪，毛春昱，马云海（2019）. 不同含水率黏重黑土与触土部件互作的离散元仿真参数标定. 《农业工程学报》.
33. 张东光，左国标，佟金，张智泓（2019）. 蚯蚓仿生注液沃土装置设计与试验. 《农业工程学报》.
34. 张东光，左国标，佟金，张智泓（2019）. 仿生注液沃土装置工作参数的优化与试验. 《农业工程学报》.
35. 杨玉婉，佟金，马云海，蒋啸虎，李金光（2019）. 鼹鼠多趾结构特征仿生旋耕刀设计与试验. 《农业工程学报》.
36. Jiyu Sun, Wei Dong Wu, Zelai Song, Jin Tong, Shujun Zhang (2019). Bio-inspirations for the Development of Light Materials based on the Nanomechanical Properties and Microstructures of Beetle Dynastes tityus. Journal of Bionic Engineering.DOI
37. Xiaohu Jiang, Jin Tong, Yunhai Ma, Jiyu Sun (2019). Development and verification of a mathematical model for the specific resistance of a curved subsoiler. Biosystems Engineering.DOI
38. Jin Tong, Baoguang Wu, Zelai Song, Zibo Gao, Jiyu Sun, Yunhai Ma, Jian Zhuang (2019). Research on the drag reduction mechanism of antlion (Myrmeleon sagax) larvae nonsmooth structural surface. Microscopy Research and Technique.DOI
39. Junwei Li, Jin Tong, Bin Hu, Yunhai Ma (2019). Biomimetic functional surface of reducing soil adhesion on 65Mn steel. Advances in Mechanical Engineering.DOI
40. Wei Dong Wu, Chao Liu, Jin Tong, Jiyu Sun, Xinyi Lin (2019). Nanomechanical and Angle-dependence Optical Properties in Beetle Popillia Indgigonacea Motsch (Coleoptera). IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO).DOI
41. Zelai Song, Fadong Li, Wei Wu, Jin Tong, Jiyu Sun (2019). Analysis of the Effect of the Attack Angles on the Deformations of the Hind Wing. IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO).DOI
42. Yucheng Liu, Xueman Lv, Jianlun Bao, Jun Xie, Xu Tang, Junjian Che, Yunhai Ma, Jin Tong (2019). Characterization of silane treated and untreated natural cellulosic fibre from corn stalk waste as potential reinforcement in polymer composites. Carbohydrate Polymers.DOI
43. Yucheng Liu, Jun Xie, Na Wu, Yunhai Ma, Carlo Menon, Jin Tong (2019). Characterization of natural cellulose fiber from corn stalk waste subjected to different surface treatments. Cellulose.DOI
44. Jiyu Sun, Chao Liu, Fadong Li, Bharat Bhushan, Wei Wu, Jin Tong (2019). Effect of vein microstructure and nanomechanical behaviors on wind-resistant performance of Asian ladybeetle hindwing. Tribology International.DOI
45. Zhihong Zhang, Ying Li, Jin Tong, Stephen Carr (2019). Convergent evolution inspired serrated structure for improving efficiency of soil imprinting and its mechanism investigation. International journal of agricultural and biological engineering.DOI
46. Yueming Wang, Na Li, Yunhai Ma, Jin Tong, Wilhelm Pfleging, Jiyu Sun (2019). Field experiments evaluating a biomimetic shark-inspired (BioS) subsoiler for tillage resistance reduction. Soil and Tillage Research.DOI
47. Yunhai Ma, Siyang Wu, Jian Zhuang, Yong Tian, Hongyan Qi, Jin Tong (2019). The effect of lignin on the physicomechanical, tribological, and morphological performance indicators of corn stalk fiber-reinforced friction materials. Materials Research Express.DOI
48. Yucheng Liu, Lining Wang, Daxin Liu, Yunhai Ma, Yong Tian, Jin Tong, P. Senthamaraikannan, Sankaranarayanan Saravanakumar (2019). Evaluation of wear resistance of corn stalk fiber reinforced brake friction materials prepared by wet granulation. Wear.DOI
49. 郭丽，王春，马淑丽，陈东辉，佟金，任丽丽（2018）. 机械通风式笼养鸡舍内外颗粒物特征与影响因素分析. 《农业机械学报》.
50. 张智泓，张广凯，佟金，赖庆辉，高旭航，唐莹，STEPHEN Carr（2018）. 克氏原螯虾头胸部外骨骼的微观形态观察和力学性能分析. 《电子显微学报》.
51. 张智泓，张广凯，佟金，赖庆辉，高旭航，唐莹，Stephen Carr（2018）. 克氏原鳌虾头胸部外骨骼微观结构和摩擦磨损特性. 《农业工程学报》.
52. 王洪昌，涂鸣，刘念，曾荣，佟金（2018）. 苗间除草机械末端执行装置研究现状. 《安徽农业科学》.
53. 王洪昌，涂鸣，刘念，曾荣，王忠民，佟金（2018）. 鼢鼠挖掘活动及爪趾几何特征量化分析. 《安徽农业科学》.
54. 张智泓，李莹，王蒙，佟金，赖庆辉，高旭航，STEPHEN Carr（2018）. 面向工程仿生的介观尺度动物肢体量化分析方法. 《江苏大学学报(自然科学版)》.
55. 张智泓，王晓阳，佟金，赖庆辉，张兆国，高旭航，Stephen CARR（2018）. 土壤表面微形貌加工技术及其在南方丘陵山区坡耕地的应用前景. 《云南农业大学学报(自然科学)》.
56. 张智泓，李莹，佟金，赖庆辉，高旭航，唐莹（2018）. 砂鱼蜥体表鳞片超微结构的扫描电镜观察. 《电子显微学报》.
57. Yunhai Ma, Huamin Wang, X. Chai, J. Zhuang, Jian Li, Jin Tong, Bharat Bhushan (2018). Thermal fatigue behavior of HHD hot work tool steel with structures. Materialwissenschaft und Werkstofftechnik.DOI
58. Yunhai Ma, Siyang Wu, Jian Zhuang, Jin Tong, Hongyan Qi (2018). Tribological and physio-mechanical characterization of cow dung fibers reinforced friction composites: An effective utilization of cow dung waste. Tribology International.DOI
59. Yucheng Liu, Yunhai Ma, Xueman Lv, Jiangtao Yu, Jian Zhuang, Jin Tong (2018). Mineral fibre reinforced friction composites: effect of rockwool fibre on mechanical and tribological behaviour. Materials Research Express.DOI
60. Yunhai Ma, Yucheng Liu, Chunyu Mao, Junwei Li, Jiangtao Yu, Jin Tong (2018). Effects of Structured Fibre on Mechanical and Tribological Properties of Phenolic Composites for Application to Friction Brakes. Polymers and Polymer Composites.DOI
61. Jiyu Sun, Yueming Wang, Yunhai Ma, Jin Tong, Zhijun Zhang (2018). DEM simulation of bionic subsoilers (tillage depth >40 cm) with drag reduction and lower soil disturbance characteristics. Advances in Engineering Software.DOI
62. Z. Wang, Ling Guo, Ping Qi Gao, S. Xu, Xiaohang Liu, Yawen Liu, Jin Tong (2018). Friction and wear properties of polyphenyl ester and graphite filler in the carbon fibre‐reinforced ultra‐high‐molecular‐weight polyethylene composites. Materialwissenschaft und Werkstofftechnik.DOI
63. Yueming Wang, Weiliang Xue, Yunhai Ma, Jin Tong, Xianping Liu, Jiyu Sun (2018). DEM and soil bin study on a biomimetic disc furrow opener. Computers and Electronics in Agriculture.DOI
64. Yucheng Liu, Jun Xie, Na Wu, Lidong Wang, Yunhai Ma, Jin Tong (2018). Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites. Tribology International.DOI
65. Yuwan Yang, Mo Li, Jin Tong, Yunhai Ma (2018). Study on the Interaction between Soil and the Five-Claw Combination of a Mole Using the Discrete Element Method. Applied Bionics and Biomechanics.DOI
66. Yunhai Ma, Siyang Wu, Jin Tong, Xin Zhang, Jie Peng, Xianping Liu (2018). Rheological Properties of Corn Starch Dispersions in Pregelatinized Starch Solution. IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO).DOI
67. Yunhai Ma, Siyang Wu, Jian Zhuang, Jin Tong, Yang Xiao, Hongyan Qi (2018). The Evaluation of Physio-Mechanical and Tribological Characterization of Friction Composites Reinforced by Waste Corn Stalk. Materials.DOI
68. Yucheng Liu, Yunhai Ma, Jiangtao Yu, Jian Zhuang, Siyang Wu, Jin Tong (2018). Development and characterization of alkali treated abaca fiber reinforced friction composites. Composite Interfaces.DOI
69. Yucheng Liu, Yunhai Ma, Junjian Che, Lingjian Duanmu, Jian Zhuang, Jin Tong (2018). Natural fibre reinforced non-asbestos organic non-metallic friction composites: effect of abaca fibre on mechanical and tribological behaviour. Materials Research Express.DOI
70. Lili Ren, Yuchen Zhang, Qian Wang, Jiang Zhou, Jin Tong, Donghui Chen, Xingguang Su (2018). Convenient Method for Enhancing Hydrophobicity and Dispersibility of Starch Nanocrystals by Crosslinking Modification with Citric Acid. International Journal of Food Engineering.DOI
71. Yunhai Ma, Siyang Wu, Jin Tong, Xiaolou Zhao, Jian Zhuang, Yucheng Liu, Hongyan Qi (2018). Tribological and mechanical behaviours of rattan-fibre-reinforced friction materials under dry sliding conditions. Materials Research Express.DOI
72. Jiyu Sun, Chao Liu, Bharat Bhushan, Wei Dong Wu, Jin Tong (2018). Effect of microtrichia on the interlocking mechanism in the Asian ladybeetle, Harmonia axyridis (Coleoptera: Coccinellidae). Beilstein Journal of Nanotechnology.DOI
73. Zhi Hong Zhang, Xiaoyang Wang, Jin Tong, Stephen Carr (2018). Innovative Design and Performance Evaluation of Bionic Imprinting Toothed Wheel. Applied Bionics and Biomechanics.DOI
74. Yanru Zhao, Dongsheng Wang, Jin Tong, Jiyu Sun, Zhang Jin (2018). Research on Biomimetic Models and Nanomechanical Behaviour of Membranous Wings of Chinese Bee Apis cerana cerana Fabricius. Applied Bionics and Biomechanics.DOI
75. 许顺，佟金，李默（2017）. 基于LabVIEW的蔬菜切碎机性能测试及工作参数优化. 《农业工程学报》.
76. 张智泓，王晓阳，佟金，赖庆辉，张兆国，高旭航，STEPHEN CARR（2017）. 土壤表面微形貌加工对红壤坡面侵蚀定量调控. 《排灌机械工程学报》.
77. Ziyang Wang, Yunhai Ma, Li Guo, Jin Tong (2017). Influence of polyphenyl ester and nanosized copper filler on the tribological properties of carbon fibre–reinforced ultra-high-molecular-weight polyethylene composites. Journal of Thermoplastic Composite Materials.DOI
78. Jiyu Sun, Ruijuan Du, Xiaofeng Liu, Kamal Bechkoum, Jin Tong, Donghui Chen (2017). A simulation of the flight characteristics of the deployable hindwings of beetle. Journal of Bionic Engineering.DOI
79. Yunhai Ma, Yucheng Liu, Lidong Wang, Jin Tong, Jian Zhuang, Honglei Jia (2017). Performance assessment of hybrid fibers reinforced friction composites under dry sliding conditions. Tribology International.DOI
80. Zeng BaiGong, Longzhe Quan, Jin Tong, Jin Ye, Deyi Xue (2017). A new approach based on central composite design and multi-objective optimization for design of a roller-mill mechanism in a maize stubble harvester. The International Journal of Advanced Manufacturing Technology.DOI
81. Jiyu Sun, Chao Liu, Haoyuan Du, Jin Tong (2017). Design of a bionic aviation material based on the microstructure of beetle’s elytra. International Journal of Heat and Mass Transfer.DOI
82. Jiyu Sun, Wei Dong Wu, Chao Liu, Jin Tong (2017). Investigating the nanomechanical properties and reversible color change properties of the beetle Dynastes tityus. Journal of Materials Science.DOI
83. Lili Ren, Xiaoxia Yan, Jiang Zhou, Jin Tong, Xingguang Su (2017). Influence of chitosan concentration on mechanical and barrier properties of corn starch/chitosan films. International Journal of Biological Macromolecules.DOI
84. Yunhai Ma, H. Wang, Bharat Bhushan, Gheorghe Pei, H. Wang, Jin Tong, Carlo Menon (2017). Tribological properties of ultra‐high molecular weight polyethylene (UHMWPE) filled with copper micro‐powder. Materialwissenschaft und Werkstofftechnik.DOI
85. Yanjiao Chang, Xiaoxia Yan, Qian Wang, Lili Ren, Jin Tong, Jiang Zhou (2017). High efficiency and low cost preparation of size controlled starch nanoparticles through ultrasonic treatment and precipitation. Food Chemistry.DOI
86. 张智泓，张广凯，佟金，Stephen Carr，赖庆辉，张兆国，方秋容（2016）. 基于有限元方法的凸齿镇压器运动学和动力学分析. 《安徽农业科学》.
87. Shun Xu, Longhai Li, Jin Tong, Mo Li (2016). Research of bionic design on tools with rostrum of cyrtotrachelus bugueti guer (coleoptera: curculionidae). Microscopy Research and Technique.DOI
88. Jiyu Sun, Wei Wu, Mingze Ling, Jin Tong, Lei Ren (2016). Fluid analysis of vein of beetle hindwing during unfolding action. International Journal of Heat and Mass Transfer.DOI
89. Zhijun Zhang, Wei Dong Wu, Jin Tong, Jiyu Sun (2016). Relationship of hydration and nanomechanical characteristics of beetle cuticle. Bioinspired Biomimetic and Nanobiomaterials.DOI
90. Yanjiao Chang, Xiaoxia Yan, Qian Wang, Lili Ren, Jin Tong, Jiang Zhou (2016). Influence of ultrasonic treatment on formation of amylose nanoparticles prepared by nanoprecipitation. Carbohydrate Polymers.DOI
91. Mo Li, Shun Xu, Yuwan Yang, Li Guo, Jin Tong (2016). A 3D simulation model of corn stubble cutting using finite element method. Soil and Tillage Research.DOI
92. Zhijun Zhang, Honglei Jia, Jiyu Sun, Jin Tong (2016). Nanoindentation investigation of the stress exponent for the creep of dung beetle (Copris ochusMotschulsky) cuticle. Bioengineered.DOI
93. Yanru Zhao, Dongsheng Wang, Jin Tong, Jiyu Sun (2016). Nanomechanical Behaviour of the Membranous Wings of Dragonfly Pantala flavescens Fabricius. Journal of Bionic Engineering.DOI
94. Lili Ren, Qian Wang, Xiaoxia Yan, Jin Tong, Jiang Zhou, Xingguang Su (2016). Dual modification of starch nanocrystals via crosslinking and esterification for enhancing their hydrophobicity. Food Research International.DOI
95. Jiang Zhou, Jin Tong, Xingguang Su, Lili Ren (2016). Hydrophobic starch nanocrystals preparations through crosslinking modification using citric acid. International Journal of Biological Macromolecules.DOI
96. Lili Ren, Youjia Fu, Yanjiao Chang, Man Jiang, Jin Tong, Jiang Zhou (2016). Performance improvement of starch films reinforced with starch nanocrystals (SNCs) modified by cross‐linking. Starch - Stärke.DOI
97. Zhiyong Chang, Wei Liu, Jin Tong, Guo Li, Heng Xie, Xiao Bo Yang, Haifeng Mu, Donghui Chen (2016). Design and experiments of biomimetic stubble cutter. Journal of Bionic Engineering.DOI
98. Jiyu Sun, Wei Dong Wu, Weiliang Xue, Jin Tong, Xianping Liu (2016). Anisotropic nanomechanical properties of bovine horn using modulus mapping. IET Nanobiotechnology.DOI
99. YAN DONG, Yanjiao Chang, Qian Wang, Jin Tong, Jiang Zhou (2016). Effects of surfactants on size and structure of amylose nanoparticles prepared by precipitation. Bulletin of Materials Science.DOI
100. Yunhai Ma, H. Wang, Yao Xiao, Xiaofeng Fan, Jin Tong, Li Guo, Limei Tian (2016). Friction and wear behaviour of steel with bionic non-smooth surfaces during sliding. Materials Science and Technology.DOI
101. Jiyu Sun, Wei Dong Wu, Mingze Ling, Bharat Bhushan, Jin Tong (2016). A dynamic nanoindentation technique to investigate the nanomechanical properties of a colored beetle. RSC Advances.DOI
102. 马云海，王虎彪，尚文博，高知辉，佟金，柴兴旺，方健儒，肖杨，高喜军（2015）. 国内外压铸冲头的研究现状及发展. 《特种铸造及有色合金》.
103. Jin Tong, Zhiyong Chang, Xiao Bo Yang, Jin Zhang, Xianping Liu, D.G. Chetwynd, Donghui Chen, Jiyu Sun (2015). Nanoindentation mechanical properties and structural biomimetic models of three species of insects wings. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
104. 张金波，佟金，马云海（2015）. 仿生肋条结构表面深松铲刃的磨料磨损特性. 《吉林大学学报(工学版)》.
105. 佟金，张清珠（2015）. 仿生镇压辊. 《现代物理知识》.
106. Dongguang Zhang, Yuxiang Chen, Yunhai Ma, Li Guo, Jiyu Sun, Jin Tong (2015). Earthworm epidermal mucus: Rheological behavior reveals drag-reducing characteristics in soil. Soil and Tillage Research.DOI
107. Zhijun Zhang, Wei Dong Wu, Jiyu Sun, Jin Tong (2015). Investigation of water's effect on nanomechanical characteristics of beetle cuticle. International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO).DOI
108. Yunhai Ma, Yucheng Liu, Carlo Menon, Jin Tong (2015). Evaluation of Wear Resistance of Friction Materials Prepared by Granulation. ACS Applied Materials & Interfaces.DOI
109. Hongchang Wang, Jin Tong (2015). The Research Progress of Intra-Row Mechanical Weeding Technology of Dry-Land. Applied Mechanics and Materials.DOI
110. Xiuli Wu, Yanjiao Chang, Youjia Fu, Lili Ren, Jin Tong, Jiang Zhou (2015). Effects of non‐solvent and starch solution on formation of starch nanoparticles by nanoprecipitation. Starch - Stärke.DOI
111. Liyan Wang, Qian Wang, Jin Tong, Jiang Zhou (2015). Physicochemical Properties of Chitosan Films Incorporated with Honeysuckle Flower Extract for Active Food Packaging. Journal of Food Process Engineering.DOI
112. Jin Tong, Wenfeng Ji, Honglei Jia, Donghui Chen, Xiaowan Yang (2015). Design and tests of biomimetic blades for soil-rototilling and stubble-breaking. Journal of Bionic Engineering.DOI
113. Hui Sheng Huang, Yongxin Li, Jintong Liu, Jin Tong, Xingguang Su (2015). Detection of bisphenol A in food packaging based on fluorescent conjugated polymer PPESO3 and enzyme system. Food Chemistry.DOI
114. Jin Tong, Qingzhu Zhang, Li Guo, Yuan Chang, Yingjie Guo, Fengwu Zhu, Donghui Chen, Xin Liu (2015). Compaction Performance of Biomimetic Press Roller to Soil. Journal of Bionic Engineering.DOI
115. Hui Huang, Ziqian Feng, Yongxin Li, Zhenning Liu, Ling Zhang, Yunhai Ma, Jin Tong (2015). Highly sensitive detection of bisphenol A in food packaging based on graphene quantum dots and peroxidase. Analytical Methods.DOI
116. Mo Li, Yuwang Yang, Guo Li, Donghui Chen, Hongliang Sun, Jin Tong (2015). Design and Analysis of Bionic Cutting Blades Using Finite Element Method. Applied Bionics and Biomechanics.DOI
117. 杨欣，许述财，佟金，张金换（2014）. 内支撑式RFT零压行走机理分析. 《清华大学学报(自然科学版)》.
118. 曾百功，刘玲，叶进，杨仕，佟金（2014）. 玉米根茬收集装置的模态分析及试验研究. 《西南大学学报(自然科学版)》.
119. Jiyu Sun, Wei Dong Wu, Weiliang Xue, Riaz Akhtar, Lei Ren, Jin Tong (2014). Quantitative Nanomechanical Properties of the Cuticle of the Multicolored Asian Lady Beetle Using the Modulus Mapping Technique. Current Nanoscience.DOI
120. Yunhai Ma, Yucheng Liu, Wenbo Shang, Zhihui Gao, Hubiao Wang, Guo Li, Jin Tong (2014). Tribological and mechanical properties of pine needle fiber reinforced friction composites under dry sliding conditions. RSC Advances.DOI
121. Lili Ren, Zhao Qin Dong, Man Jiang, Jin Tong, Jiang Zhou (2014). Hydrophobization of starch nanocrystals through esterification in green media. Industrial Crops and Products.DOI
122. Yunhai Ma, Yucheng Liu, Shengsheng Ma, Hubiao Wang, Zhihui Gao, Junjie Sun, Jin Tong, Li Guo (2014). Friction and wear properties of dumbbell‐shaped jute fiber‐reinforced friction materials. Journal of Applied Polymer Science.DOI
123. Yan Dong, Yanjiao Chang, Qian Wang, Jin Tong, Jiang Zhou (2014). Effect of operating conditions on size and morphology of amylose nanoparticles prepared by precipitation. Starch - Stärke.DOI
124. Yongxin Li, Hui Huang, Yunhai Ma, Jin Tong (2014). Highly sensitive fluorescent detection of dihydroxybenzene based on graphene quantum dots. Sensors and Actuators B Chemical.DOI
125. Jiyu Sun, Mingze Ling, CHUNXIANG PAN, Donghui Chen, Jin Tong, Xin Li (2014). BIOMIMETIC STRUCTURE DESIGN OF DRAGONFLY WING VENATION USING TOPOLOGY OPTIMIZATION METHOD. Journal of Mechanics in Medicine and Biology.DOI
126. Y. J. Ma, Y. C. Liu, Jie Peng, S. S. Ma, Li Guo, Jin Tong (2014). Friction and wear properties of semimetallic friction composites with bionic non-smooth structure. Materials Research Innovations.DOI
127. Jiyu Sun, Mingze Ling, Wei Wu, Bharat Bhushan, Jin Tong (2014). The Hydraulic Mechanism of the Unfolding of Hind Wings in Dorcus titanus platymelus (Order: Coleoptera). International Journal of Molecular Sciences.DOI
128. Yunhai Ma, Yucheng Liu, Zhihui Gao, Fudong Lin, Yazhou Yang, Wei Ye, Jin Tong (2014). Effects of wool fibers on tribological behavior of friction materials. Journal of Thermoplastic Composite Materials.DOI
129. Jiyu Sun, Mingze Ling, Yueming Wang, Donghui Chen, Shujun Zhang, Jin Tong, Shuang Wang (2014). Quasi-Static and Dynamic Nanoindentation of Some Selected Biomaterials. Journal of Bionic Engineering.DOI
130. 王庆洲，徐立新，杨梅玉，佟金，陈玉香（2013）. 蚯蚓与有机质分解的激发效应关系研究进展. 《农机化研究》.
131. 佟金，王亚辉，卢纪生，张书军，陈东辉（2013）. 基于CCD的大型台阶轴锻件同轴度测量. 《吉林大学学报(工学版)》.
132. 常志勇，陈东辉，张凌，佟月英，翁小辉，佟金（2013）. 基于多传感器融合的鸡肉新鲜度检测方法. 《吉林大学学报(工学版)》.
133. 佟金，王亚辉，樊雪梅，张书军，陈东辉（2013）. 生鲜农产品冷链物流状态监控信息系统. 《吉林大学学报(工学版)》.
134. Xiuli Wu, Peng Liu, Lili Ren, Jin Tong, Jiang Zhou (2013). Optimization of corn starch succinylation using response surface methodology. Starch - Stärke.DOI
135. Dong Hui Chen, Shao Bo Ye, Xiao Hui Weng, Jin Tong, Zhi Yong Chang (2013). Artificial Olfactory System Technology on Chicken Freshness Detection. Applied Mechanics and Materials.DOI
136. Jin Bo Zhang, Jin Tong, Yun Hai Ma (2013). Simulation of Bionic Anti-Drag Subsoiler with Exponential Curve Feature Using Discrete Element Method. Applied Mechanics and Materials.DOI
137. Jin Tong, Mo Li, Ji Li Wang, Qing Zhu Zhang (2013). A New Approach to the Similarity Analysis in Bionic Engineering and its Applications. Applied Mechanics and Materials.DOI
138. Xia Bai, Zhao Dong, Xiuli Wu, Jin Tong, Jiang Zhou (2013). Changes in crystalline structure of microspheres of corn starch and amylose under isothermal and temperature cycling treatments. Industrial Crops and Products.DOI
139. Zhijun Zhang, HONLEI JIA, Jiyu Sun, Mingze Ling, Yueming Wang, Jin Tong (2013). THE DIFFERENTIAL CONSTITUTIVE EQUATION AND MODEL OF ABALONE NACRE BY NANOINDENTER. Journal of Mechanics in Medicine and Biology.DOI
140. Zhi Yong Chang, Dong Hui Chen, Zhi Hong Zhang, Yue-ying Tong, Jin Tong, Lu Dai (2013). Design of a Bionic Olfactory, Tactile Integrated System and its Application in Chicken Meat Quality Inspection. Applied Mechanics and Materials.DOI
141. Jin Tong, Qing Zhu Zhang, Dong Hui Chen, Yuan Chang, Hongchang Wang (2013). Effects of Bionic Geometric Structure Press Rollers on Reducing Rolling Resistance and Adhesion against Soil. Applied Mechanics and Materials.DOI
142. Yun Hai Ma, Sheng Sheng Ma, Sheng Long Shen, Jin Tong, Guo Li (2013). Hybrid Biological Fiber-Reinforced Resin-Based Friction Materials Friction and Wear Performance Test. Applied Mechanics and Materials.DOI
143. Wen Feng Ji, Jin Tong, Dong Hui Chen (2013). Reconstruction of Geometrical Structure of Claw of Mole Rat (Scaptochirus moschatus) and Finite Element Analysis of Claw against Soil. Applied Mechanics and Materials.DOI
144. Jin Tong, Zhi Hong Zhang, Dong Hui Chen, Hongchang Wang, Yun Hai Ma (2013). A Method for Quantitative Analysis of Geometrical Structure of Animal Organs in Meso-Scale: The Dung Beetle Foreleg End Tooth as a Case Example. Applied Mechanics and Materials.DOI
145. Rui Qing Wang, Xiao Hui Wang, Yue Ming Wang, Jiu Hao Gao, Jin Tong, Ji Yu Sun (2013). A Model of Sheath of Bovine Horn Coupled Nano-Mechanical Properties and Microstructures. Applied Mechanics and Materials.DOI
146. Xiaogang Dong, Dong Ming Yan, Man Jiang, Liyan Wang, Jin Tong, Jiang Zhou (2013). Modification of microcrystalline cellulose by using soybean oil for surface hydrophobization. Industrial Crops and Products.DOI
147. Mo Li, Donghui Chen, Shujun Zhang, Jin Tong (2013). Biomimeitc design of a stubble-cutting disc using finite element analysis. Journal of Bionic Engineering.DOI
148. Jiyu Sun, Bharat Bhushan, Jin Tong (2013). Structural coloration in nature. RSC Advances.DOI
149. 马云海，佟金，王宝刚，孙喜龙，蒋蔓（2012）. 矿物纤维增强酚醛树脂基摩擦材料热压工艺. 《农业工程学报》.
150. 张智泓，佟金，陈东辉，孙霁宇，马云海（2012）. 不同材质仿生凸齿镇压器滚动件的模态分析. 《农业工程学报》.
151. 陈玉香，陈静，佟金，周道玮（2012）. 提高玉米秸秆饲用价值方法的研究进展. 《农机化研究》.
152. 常志勇，陈东辉，佟月英，佟金，谢军（2012）. 基于人体嗅觉特征的猪肉新鲜度仿生电子鼻检测技术. 《吉林大学学报(工学版)》.
153. Liyan Wang, Dong Yan, Haitao Men, Jin Tong, Jiang Zhou (2012). Preparation and characterization of active films based on chitosan incorporated tea polyphenols. Food Hydrocolloids.DOI
154. Yunhai Ma, Shenglong Shen, Jin Tong, Wei Ye, Yazhou Yang, Jiang Zhou (2012). Effects of bamboo fibers on friction performance of friction materials. Journal of Thermoplastic Composite Materials.DOI
155. Yunhai Ma, Jin Tong, Baogang Wang, Sun Xi-long, Man Jiang (2012). Research on hot-press processing of friction material based on phenolic resin reinforced with mineral fiber. Nongye gongcheng xuebao.DOI
156. Ziqin Liu, Dong Yan, Haitao Men, Man Jiang, Jin Tong, Jiang Zhou (2012). Post-crosslinking modification of thermoplastic starch/PVA blend films by using sodium hexametaphosphate. Carbohydrate Polymers.DOI
157. Yun Hai Ma, Fu Dong Lin, Bao Gang Wang, Jin Tong, Hong Lei Jia (2012). The Mechanical Properties of Natural Fiber. Advanced materials research.DOI
158. Su Qiu Jia, Yun Hai Ma, Jin Tong, Guo Jun Liu (2012). Microstructure and Wear Property of Zn-Al Alloy Reinforced with Carbonized Rice Husks. Advanced materials research.DOI
159. Jin Tong, Zeng Bai-gon, Dong Hui Chen, Long Zhe Quan, Shujun Zhang (2012). Finite Element Modal Analysis of the Frame of Corn Stubble-Collector. Advanced materials research.DOI
160. 汲文峰，贾洪雷，佟金（2011）. 旋耕-碎茬仿生刀片田间旋耕作业功耗的试验研究. 《中国农业工程学会2011年学术年会论文集》.
161. 杨亚洲，佟金，蒋蔓，徐杰，赵丽萍（2011）. 复合矿物纤维增强制动衬片的力学及摩擦磨损性能研究. 《宁夏农林科技》.
162. 高吭，李玉柱，佟金（2011）. 东方蝼蛄前胸背板外轮廓数据采集与量化分析. 《农业工程学报》.
163. 孙霁宇，佟金，马云海，张东东（2011）. 昆虫表皮蠕变应力指数的研究. Proceedings of 2011 International Conference on Biomedicine and Engineering （ISBE 2011 V1）.
164. 常志勇，陈东辉，门海涛，佟金，谢军（2011）. 基于圆锥形仿生气体室的鸡肉新鲜度电子鼻检测技术. 《吉林大学学报(工学版)》.
165. 王秋雯，孙友宏，刘宝昌，佟金，马银龙，王传留（2011）. CVD金刚石强化孕镶金刚石钻头的冲击回转钻进试验研究. 《金刚石与磨料磨具工程》.
166. Liang Xie, Man Jiang, Xiaogang Dong, Xia Bai, Jin Tong, Jiang Zhou (2011). Controlled mechanical and swelling properties of poly(vinyl alcohol)/sodium alginate blend hydrogels prepared by freeze–thaw followed by Ca2+ crosslinking. Journal of Applied Polymer Science.DOI
167. Ji Yu Sun, Yue Ming Wang, Dong Hui Chen, Jin Tong, Chun Xiang Pan (2011). Differential Constitutive Equation of Elytra Cuticle by Nanoindentation. Advanced materials research.DOI
168. Su Qiu Jia, Jin Tong, Yun Hai Ma (2011). Characterization of SiC Whiskers from Rice Husks in Argon Atmosphere. Advanced materials research.DOI
169. Yazhou Yang, Man Jiang, Jie Xu, Yunhai Ma, Jin Tong (2011). Uniform Design of Optimizing Formulation of Friction Materials with Composite Mineral Fiber (CMF) and Their Friction and Wear Behavior. Applied Composite Materials.DOI
170. Yun Hai Ma, Su Qiu Jia, Bao Gang Wang, Wei Ye, Jin Tong, Hong Lei Jia, Shuang Wen (2011). Properties of Jute Fibers Reinforced Friction Materials. Advanced materials research.DOI
171. Jin Tong, Zhihong Zhang, Yunhai Ma, Donghui Chen, Bingyun Jia, Carlo Menon (2011). Abrasive wear of embossed surfaces with convex domes. Wear.DOI
172. Lili Ren, Man Jiang, Liyan Wang, Jiang Zhou, Jin Tong (2011). A method for improving dispersion of starch nanocrystals in water through crosslinking modification with sodium hexametaphosphate. Carbohydrate Polymers.DOI
173. Jibo Zhang, Jin Tong, Caihua Li, Yunhai Ma, LI Ya-qin (2011). The microstructure and nanomechanical properties of chlamys farreri shell. International Conference on Remote Sensing, Environment and Transportation Engineering.DOI
174. Su Qiu Jia, Jin Tong, Yun Hai Ma (2011). Characterization of Rice Husks of Pyrolysed at 320°C and Adsorption Ni2+ Ions. Advanced materials research.DOI
175. 佟月英，陈东辉，石志标，佟金（2010）. 鸡肉的压力特性曲线与其新鲜度的关系. 《吉林大学学报(工学版)》.
176. 任丽丽，周江，佟金（2010）. 烯基琥珀酸酐表面改性淀粉膜羟基取代度的影响因素. 《吉林大学学报(工学版)》.
177. Lili Ren, Man Jiang, Jin Tong, Xia Bai, Xiaogang Dong, Jiang Zhou (2010). Influence of surface esterification with alkenyl succinic anhydrides on mechanical properties of corn starch films. Carbohydrate Polymers.DOI
178. ChaoFei Wang, Jin Tong, Jiyu Sun (2010). Kinematics of Chinese toad Bufo gargarizans. Science China Technological Sciences.DOI
179. Wenfeng Ji, Donghui Chen, Honglei Jia, Jin Tong (2010). Experimental Investigation into Soil-Cutting Performance of the Claws of Mole Rat (Scaptochirus moschatus). Journal of Bionic Engineering.DOI
180. Jin Tong, Mohammad Almagzoub Mohammad Almobarak, Yunhai Ma, Wei Ye, Sen Zheng (2010). Biomimetic Anti-Abrasion Surfaces of a Cone Form Component Against Soil. Journal of Bionic Engineering.DOI
181. Jiyu Sun, Xianping Liu, Jin Tong, Zhaoyang Yue (2010). Sensitive elastic modulus mapping of micro-structured biomaterials. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
182. Jin Tong, Mohammad Almagzoub Mohammad, Jinbo Zhang, Yunhai Ma, Baojun Rong, Donghui Chen, Carlo Menon (2010). DEM Numerical Simulation of Abrasive Wear Characteristics of a Bioinspired Ridged Surface. Journal of Bionic Engineering.DOI
183. 闫久林，马云海，李萌，佟金，张哲，孙剑（2009）. 人工神经网络在食品检测中的应用. 《农机化研究》.
184. 张伏，付三玲，佟金，周江，张国英（2009）. 黄糊精/秸秆纤维增强复合材料的吸湿性能分析. 《农业机械学报》.
185. 贺俊林，裘祖荣，崔清亮，佟金（2009）. 降低排种器工作气压的工程仿生设计. 《纪念中国农业工程学会成立三十周年暨中国农业工程学会2009年学术年会（CSAE 2009）》.
186. 张伏，佟金，周江，杨欣，马云海（2009）. 四种昆虫鞘翅断面的超微观结构及仿生模型. 《纪念中国农业工程学会成立三十周年暨中国农业工程学会2009年学术年会（CSAE 2009）》.
187. 杨亚洲，佟金，马云海，徐杰（2009）. 改性黄麻纤维和酚醛树脂复合材料的力学性能. 《吉林农业大学学报》.
188. 赵彦如，佟金，孙霁宇，陈东辉，张金（2009）. 基于逆向工程的黄蜻膜翅几何数据采集与处理. 《农机化研究》.
189. 赵彦如，佟金，孙霁宇，陈东辉，张金（2009）. 蜻蜓膜翅前缘脉的纳米力学性能. 《农机化研究》.
190. 马云海，闫久林，佟金，李萌，孙剑（2009）. 天然生物材料结构特征及仿生材料的发展趋势. 《农机化研究》.
191. 王超飞，佟金（2009）. 两栖纲无尾目典型动物优异生物特性及其工程仿生应用. 《农机化研究》.
192. 周江，马云海，佟金（2009）. 提高热塑性淀粉材料耐水性的研究进展. 《材料导报》.
193. 周江，任丽丽，佟金，马云海（2009）. 热塑性淀粉膜的表面酯化改性. 《2009年全国高分子学术论文报告会》.
194. 刘宝昌，孙友宏，佟金，王秋雯，王传留，马银龙（2009）. CVD金刚石条强化孕镶金刚石钻头的试验研究. 《金刚石与磨料磨具工程》.
195. Jiyu Sun, Jin Tong, Zhijun Zhang (2009). Nanomechanical properties and the hierarchical structure of elytra cuticle of dung beetle (Copris ochus Motschulsky). International Conference on Mechatronics and Automation.DOI
196. Jiang Zhou, Lili Ren, Jin Tong, Liang Xie, Ziqin Liu (2009). Surface esterification of corn starch films: Reaction with dodecenyl succinic anhydride. Carbohydrate Polymers.DOI
197. Jiang Zhou, Lili Ren, Jin Tong, Yunhai Ma (2009). Effect of surface esterification with octenyl succinic anhydride on hydrophilicity of corn starch films. Journal of Applied Polymer Science.DOI
198. Jin Tong, Ballel Z. Moayad, Yunhai Ma, Jiyu Sun, Donghui Chen, Honglei Jia, Luquan Ren (2009). Effects of biomimetic surface designs on furrow opener performance. Journal of Bionic Engineering.DOI
199. Jin Tong (2009). Progress in Studies of Enhancing Water Resistance of Thermoplastic Starch. Cailiao daobao.
200. 孙霁宇，佟金，陈东辉（2008）. 臭蜣螂部位表皮纳米力学性能的测试研究. 《走中国特色农业机械化道路——中国农业机械学会2008年学术年会论文集（上册）》.
201. 张伏，付三玲，佟金，周江（2008）. 玉米淀粉糊的流变学特性分析. 《农业工程学报》.
202. 刘财勇，佟金，汲文峰（2008）. 基于逆向工程技术的鼹鼠前爪趾甲几何模型. 《农机化研究》.
203. 刘财勇，佟金，孙霁宇，马云海（2008）. 鼹鼠(Scaptochirus moschatus)趾甲断面层状结构和力学性能. 《走中国特色农业机械化道路——中国农业机械学会2008年学术年会论文集（上册）》.
204. 张伏，付三玲，佟金，周江（2008）. 黄糊精／秸秆纤维增强复合材料的弯曲性能. 《走中国特色农业机械化道路——中国农业机械学会2008年学术年会论文集（上册）》.
205. 吴娜，张伏，佟金（2008）. 臭蜣螂(Copris ochus Motschulsky)唇基减阻的力学分析. 《走中国特色农业机械化道路——中国农业机械学会2008年学术年会论文集（上册）》.
206. 侯哲生，佟金，马云海，任露泉（2008）. 玉米秸秆纤维瘤胃微生物预处理的前景. 《农机化研究》.
207. 马云海，佟金，周江，荣宝军，任露泉（2008）. 穿山甲鳞片表面的几何形态特征及其性能. 《电子显微学报》.
208. 张哲，佟金，陈东辉（2008）. 分立传感器电子鼻. 《吉林大学学报(工学版)》.
209. 佟金，荣宝军，马云海，张金波（2008）. 仿生棱纹几何结构表面的土壤磨料磨损. 《摩擦学学报(中英文)》.DOI
210. Zhe Zhang, Jin Tong, Donghui Chen, Yubin Lan (2008). Electronic Nose with an Air Sensor Matrix for Detecting Beef Freshness. Journal of Bionic Engineering.DOI
211. Jiang Zhou, Yunhai Ma, Jian Zhang, Jin Tong (2008). Influence of surface photocrosslinking on properties of thermoplastic starch sheets. Journal of Applied Polymer Science.DOI
212. Jiang Zhou, Yunhai Ma, Lili Ren, Jin Tong, Ziqin Liu, Liang Xie (2008). Preparation and characterization of surface crosslinked TPS/PVA blend films. Carbohydrate Polymers.DOI
213. Yunhai Ma, Rong Bojun, Jin Tong, Honglei Jia (2008). Design and test of horizontal double-rotary mixer granulator. Nongye gongcheng xuebao.DOI
214. Jin Tong, Baojun Rong, Yan Jiulin, Yunhai Ma, Bingyun Jia (2008). Measuring method for abrasive volume of biomimetic embossed surfaces using reverse engineering. Wear.DOI
215. Jiang Zhou, Jian Zhang, Yunhai Ma, Jin Tong (2008). Surface photo-crosslinking of corn starch sheets. Carbohydrate Polymers.DOI
216. Jiyu Sun, Jin Tong, Yunhai Ma (2008). Nanomechanical Behaviours of Cuticle of Three Kinds of Beetle. Journal of Bionic Engineering.DOI
217. 侯哲生，佟金（2007）. 玉米秸秆纤维瘤胃微生物预处理的展望. 《2007年中国农业工程学会学术年会论文摘要集》.
218. 佟金，张伏，周江，马云海（2007）. 玉米淀粉黏结剂的黏结性能. 《农业工程学报》.
219. 荣宝军，佟金，马云海，张金波（2007）. 几种动物体表的几何特征数据采集与处理. 《2007年中国农业工程学会学术年会》.
220. 张伏，佟金，周江（2007）. 普通玉米淀粉糊的流变学特性分析. 《2007年中国农业工程学会学术年会论文摘要集》.
221. 贺俊林，佟金，陈志，方宪法，韩增德（2007）. 指形拨禾轮分禾机构的虚拟设计与运动仿真. 《农业机械学报》.
222. 杨欣，张书军，佟金，陈秉聪（2007）. 零压续跑轮胎内支撑三维结构拓扑优化. 《2007年中国农业工程学会学术年会论文摘要集》.
223. 陈勇，佟金，陈秉聪（2007）. 黄牛在松软地面运动特性的分析. 《2007年中国农业工程学会学术年会论文摘要集》.
224. 侯哲生，佟金（2007）. 蠕动发酵罐的仿生耦合设计. 《农业机械学报》.
225. Jiyu Sun, Jin Tong, Zichao Zhang (2007). The specimen preparation methods for nanoindentation testing of biomaterials: a review. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
226. Jiyu Sun, Jin Tong, Zhijun Zhang (2007). Nanoindentation Technique for Measuring Properties of the Clypeus Cuticle of Dung Beetle. International Conference on Mechatronics and Automation.DOI
227. Shujun Zhang, Jin Tong, Kevin Hapeshi, Donghui Chen (2007). Optimising body layout design of limbed machines. Journal of Bionic Engineering.DOI
228. Jin Tong, Yanru Zhao, Jiyu Sun, Donghui Chen (2007). Nanomechanical properties of the stigma of dragonfly Anax parthenope julius Brauer. Journal of Materials Science.DOI
229. Jiyu Sun, Jin Tong (2007). Fracture toughness properties of three different biomaterials measured by nanoindentation. Journal of Bionic Engineering.DOI
230. Jin Tong, Tie-biao Lü, Yunhai Ma, Heng-kun Wang, Luquan Ren, Robert Arnell (2007). Two-body abrasive wear of the surfaces of Pangolin scales. Journal of Bionic Engineering.DOI
231. 孙霁宇，佟金（2006）. 纳米力学测量中的仪器校准. 《电子显微学报》.
232. 杨欣，佟金，陈东辉，张书军，陈秉聪（2006）. 零压续跑轮胎内支撑三维结构有限元分析. 《农业机械化与新农村建设——中国农业机械学会2006年学术年会论文集（上册）》.
233. 张伏，佟金，周江（2006）. 蜡质玉米淀粉糊的流变学特性. 《中国农业机械学会2006年学术年会》.
234. 赵彦如，佟金，孙霁宇，张金（2006）. 家蝇前翅脉络及微观结构分析. 《农业机械化与新农村建设——中国农业机械学会2006年学术年会论文集（上册）》.
235. 马云海，佟金（2006）. 三种纤维填充的超高分子量聚乙烯复合材料的润湿性. 《农业机械化与新农村建设——中国农业机械学会2006年学术年会论文集（上册）》.
236. 孙琳，佟金，陈东辉，孙霁宇（2006）. 干摩擦及润滑条件下GCr15钢／20 # 钢摩擦副摩擦过程分析. 《农业机械化与新农村建设——中国农业机械学会2006年学术年会论文集（上册）》.
237. 侯哲生，佟金（2006）. 蠕动发酵罐的设计. 《农业机械化与新农村建设——中国农业机械学会2006年学术年会论文集（上册）》.
238. 贺俊林，佟金（2006）. 我国玉米收获机械的现状及其发展. 《农机化研究》.
239. 陈东辉，郭红霞，佟金（2006）. 非开挖工作部件的仿生设计与试验研究. 《农业机械化与新农村建设——中国农业机械学会2006年学术年会论文集（上册）》.
240. 杨欣，贾晶霞，佟金，刘俊峰（2006）. 农业机械典型部件装配关联设计. 《计算机辅助设计与图形学学报》.
241. 高聚琼，陈东辉，孙霁宇，佟金（2006）. 鲤鱼鳞片断面的微观结构及纳米力学性能. 《农机化研究》.
242. 马云海，王云鹏，佟金，杨亚洲（2006）. 两种矿物纤维增强摩擦材料的摩擦学特性和磨屑分析. 《2006年全国电子显微学会议》.
243. 高吭，陈东辉，佟金（2006）. 优雅蝈螽Gampsocleis gratiosa爪垫微观结构的电镜分析. 《2006年全国电子显微学会议》.
244. 戴振东，佟金，任露泉（2006）. 仿生摩擦学的研究及发展. 《2006全国摩擦学学术会议》.
245. 王云鹏，马云海，佟金，杨亚洲（2006）. 硅灰石/海泡石纤维混杂增强摩擦材料的摩擦学行为. 《2006年全国电子显微学会议论文集》.
246. 闫久林，马云海，佟金（2006）. 铜粉增强UHMWPE基复合材料的拉伸和冲击性能研究. 《2006年全国电子显微学会议》.
247. 周江，佟金（2006）. 淀粉泡沫材料研究进展及其在包装领域的应用. 《包装工程》.
248. 杨欣，佟金，张伏，张书军（2006）. 自适应虚拟设计在零压续跑轮胎内支撑设计中的应用. 《吉林大学学报(工学版)》.
249. Luquan Ren, Jin Tong, D. Chen, Dong Lin He, Z. Han, Jian Li (2006). Erratum to: Conductive percolation threshold of conductive-insulating granular composites. Journal of Materials Science.DOI
250. Zhendong Dai, Jin Tong, Luquan Ren (2006). Researches and developments of biomimetics in tribology. Chinese Science Bulletin.DOI
251. Jin Tong (2006). Research and development of starch based foams and their applications in packaging. Packaging Engineering.
252. Jin Tong (2006). Microstructure and Nano-indentation Hardness of Transverse Section of Cyprinus Carpio Haematopterus Scale. Journal of Agricultural Mechanization Research.
253. 佟金，吴娜（2005）. 金龟子头部截面拟合曲线数学建模. 《华中农业大学学报》.
254. 张伏，杨欣，佟金（2005）. 几种纤维增强塑料复合材料的发展现状与趋势. 《华中农业大学学报》.
255. 孙霁宇，佟金（2005）. 甲壳类昆虫生物材料性能、微观结构研究与仿生进展. 《华中农业大学学报》.
256. 赵彦如，陈东辉，佟金（2005）. 近红外分析技术及其应用. 《华中农业大学学报》.
257. 张哲，佟金（2005）. 电子鼻和电子舌在食品检测中的研究和应用. 《华中农业大学学报》.
258. 都金丹，孙霁宇，佟金（2005）. 用原子力显微镜测试苹果果皮超微结构. 《华中农业大学学报》.
259. Donghui Chen, Jin Tong, Jiyu Sun, Luquan Ren (2005). Tribological behavior of Gampsocleis Gratiosa foot pad against vertical flat surfaces. Journal of Bionic Engineering.DOI
260. Jin Tong, Yunhai Ma, Robert Arnell, Luquan Ren (2005). Free abrasive wear behavior of UHMWPE composites filled with wollastonite fibers. Composites Part A Applied Science and Manufacturing.DOI
261. Jin Tong, Yunhai Ma, Donghui Chen, Jiyu Sun, Luquan Ren (2005). Effects of vascular fiber content on abrasive wear of bamboo. Wear.DOI
262. Jiyu Sun, Yongqiang Guo, Jin Tong (2005). Testing methods for nanoindentation property of the cuticle of bovine hoof wall and dung beetle’s foreleg femur. Journal of Terramechanics.DOI
263. Jin Tong, H. Wang, Yunhai Ma, Luquan Ren (2005). Two-Body Abrasive Wear of the Outside Shell Surfaces of Mollusc Lamprotula fibrosa Heude, Rapana venosa Valenciennes and Dosinia anus Philippi. Tribology Letters.DOI
264. Jin Tong, Ballel Z. Moayad (2005). Effects of rake angle of chisel plough on soil cutting factors and power requirements: A computer simulation. Soil and Tillage Research.DOI
265. Jin Tong, Fengwu Zhu, Yunhai Ma, Zhiwu Han, Luquan Ren (2005). Wettability and soil friction of the wollastonite fiber filled UHMWPE composites. Journal of Materials Science.DOI
266. C.Z. Liu, Jun Wu, J.Q. Li, Luquan Ren, Jin Tong, A.D. Arnell (2005). Tribological behaviours of PA/UHMWPE blend under dry and lubricating condition. Wear.DOI
267. Luquan Ren, Zhiwu Han, J.Q. Li, Jin Tong (2005). Experimental investigation of bionic rough curved soil cutting blade surface to reduce soil adhesion and friction. Soil and Tillage Research.DOI
268. 郭颖杰，佟金（2004）. 角蛋白材料结构与力学特性研究进展. 《农业工程学报》.
269. Yunhai Ma, Jin Tong, Yinsheng Yang (2004). Statistical analysis of experimental condition effects on free abrasive wear of UHMWPE. Journal of Materials Science.DOI
270. Li Zhang, Luquan Ren, Jin Tong, Yaowu Shi (2004). Study of soil-solid adhesion by grey system theory*. Progress in Natural Science Materials International.DOI
271. Zhiwu Han, Cai Liu, Wei-Ping Lu, Luquan Ren, Jin Tong (2004). Spline finite strip analysis of forming parameters in roll forming a channel section. Journal of Materials Processing Technology.DOI
272. Jin Tong, Jiyu Sun, Donghui Chen, Shujun Zhang (2004). Geometrical features and wettability of dung beetles and potential biomimetic engineering applications in tillage implements. Soil and Tillage Research.DOI
273. 佟金，孙霁宇，韩志武（2003）. 臭蜣螂(Copris ochus Motschulsky)表面纳米力学性能测试方法. 《农业机械化与全面建设小康社会——中国农业机械学会成立40周年庆典暨2003年学术年会论文集》.
274. 李世武，佟金，张书军，陈秉聪（2003）. 基于逆向工程的牛蹄三维几何模型曲面重构. 《中国农业机械学会成立40周年庆典暨2003年学术年会论文集》.
275. 杨印生，佟金，任露泉（2003）. 农机教育与人才的精确培养. 《农业机械化与全面建设小康社会——中国农业机械学会成立40周年庆典暨2003年学术年会论文集》.
276. 马云海，佟金，阎久林（2003）. BP神经网络预测UHMWPE基复合材料干滑动摩擦学特性. 《农业机械化与全面建设小康社会——中国农业机械学会成立40周年庆典暨2003年学术年会论文集》.
277. 佟金，马云海（2003）. 超高分子量聚乙烯基复合材料的润湿性. 《农业机械化与全面建设小康社会——中国农业机械学会成立40周年庆典暨2003年学术年会论文集》.
278. 朱凤武，马云海，佟金（2003）. 几种材料的土壤摩擦和磨料磨损. 《农业机械化与全面建设小康社会——中国农业机械学会成立40周年庆典暨2003年学术年会论文集》.
279. 佟金，郭颖杰（2003）. 农业生物材料的力学特性. 《中国农业机械学会成立40周年庆典暨2003年学术年会》.
280. 佟金，杨亚洲，马云海（2003）. 软体动物绢丝丽蚌壳体的低载低速干滑动摩擦和磨损. 《中国农业机械学会成立40周年庆典暨2003年学术年会论文集》.
281. Zhiwu Han, Cai Liu, Wei-Ping Lu, Luquan Ren, Jin Tong (2003). Experimental investigation and theoretical analysis of roll forming of electrical resistance welded pipes. Journal of Materials Processing Technology.DOI
282. Jin Tong, Yunhai Ma, Man Jiang (2003). Effects of the wollastonite fiber modification on the sliding wear behavior of the UHMWPE composites. Wear.DOI
283. 郭志军，周志立，佟金，任露泉（2002）. 抛物线型切削面刀具切削性能二维有限元分析. 《河南科技大学学报(自然科学版)》.
284. Luquan Ren, Zhiwu Han, Jianjiao Li, Jin Tong (2002). Effects of non-smooth characteristics on bionic bulldozer blades in resistance reduction against soil. Journal of Terramechanics.DOI
285. C.Z. Liu, Luquan Ren, Jin Tong, Sarah Green, R.D. Arnell (2002). Effects of operating parameters on the lubricated wear behavior of a PA-6/UHMWPE blend: a statistical analysis. Wear.DOI
286. Chaozong Liu, R.G Fairhurst, Luquan Ren, Sarah Green, Jin Tong, R.D. Arnell (2002). Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering. Surface and Coatings Technology.DOI
287. Jin Tong (2002). EFFECTS OF FORMING PARAMETERS ON ROLL FORMING OF A SIMPLE SECTION STEEL. Acta Metallurgica Sinica.
288. 郭志军，佟金，周志立，任露泉（2001）. 深松技术研究现状与展望. 《农业工程学报》.
289. Luquan Ren, Qian Cong, Jin Tong, Bingcong Chen (2001). Reducing adhesion of soil against loading shovel using bionic electro-osmosis method. Journal of Terramechanics.DOI
290. Chaozong Liu, A.R. Gibbons, R.D. Arnell, Jin Tong, Luquan Ren (2001). Reactive deposition of aluminium oxide coatings on PTFE substrate. Surface and Coatings Technology.DOI
291. Luquan Ren, Jin Tong, Jianqiao Li, Bingcong Chen (2001). SW—Soil and Water. Journal of Agricultural Engineering Research.DOI
292. 任露泉，李建桥，佟金，陈秉聪（2000）. 生物非光滑及其应用. 《第一届国际机械工程学术会议》.
293. 任露泉，佟金（1999）. 高效节能农业机械仿生技术. 《面向21世纪的科技进步与社会经济发展（上册）》.
294. 刘朝宗，任露泉，佟金，冯玉军（1998）. 超高分子量聚乙稀(UHMWPE)及其复合材料的土壤粘附. 《农业工程学报》.
295. Jin Tong, R.D. Arnell, Luquan Ren (1998). Dry sliding wear behaviour of bamboo. Wear.DOI
296. Jin Tong, Mingzhe Zhang, Man Jiang, Luquan Ren (1998). Free-abrasive wear of an enamel coating. Journal of Materials Science Letters.DOI
297. Luquan Ren, Yunpeng Wang, Jianqiao Li, Jin Tong (1998). Flexible unsmoothed cuticles of soil animals and their characteristics of reducing adhesion and resistance. Chinese Science Bulletin.DOI
298. 贾贤，任露泉，陈秉聪，佟金，丛茜（1995）. 土壤动物体表非光滑对体表润湿性的影响. 《农业工程学报》.
299. Jin Tong, Luquan Ren, Jianqiao Li, Bingcong Chen (1995). Abrasive wear behaviour of bamboo. Tribology International.DOI
300. Jin Tong, Luquan Ren, B. -C. Chen (1995). Chemical constitution and abrasive wear behaviour of pangolin scales. Journal of Materials Science Letters.DOI
301. Jin Tong, Luquan Ren, Bingcong Chen, A.R. Qaisrani (1994). Characteristics of adhesion between soil and solid surfaces. Journal of Terramechanics.DOI
302. 孙世元，任露泉，佟金，陈平（1993）. 仿生钢布兜式铲斗的研究. 《农业机械学报》.
303. 佟金，任露泉，陈秉聪（1991）. 聚合物及其复合材料的磨料磨损. 《机械工程材料》.
304. 佟金，张明喆，陆有，蒋蔓，路新春（1990）. 铸造铝硅合金滑动磨损的磨屑与金属转移的研究. 《机械工程材料》.
305. 任露泉，佟金，陈秉聪，吴连奎（1990）. 土壤—固体表面粘附行为的热力学分析. 《农业工程学报》.
306. 佟金，路新春，陈永潭，任露泉，陈秉聪（1990）. PTFE基复合材料的土壤粘附与磨料磨损的研究. 《农业工程学报》.

预印本

1. Zelai Song, Yongwei Yan, Wei Wu, Jin Tong, Jiyu Sun (2020). The roles of wrinkle structures in the veins of Asian Ladybird and bioinspiration. bioRxiv (Cold Spring Harbor Laboratory).DOI

书籍章节

1. Yunhai Ma, Yucheng Liu, Jin Tong (2021). Tribology of thermosetting composites. Elsevier eBooks.DOI