程耿东

期刊论文

1. 程耿东（2026）. 序言. 《计算力学学报》.
2. 张谦，聂英豪，程耿东，宫秀臣（2026）. 变荷载作用下理想弹塑性桁架结构安定状态残余响应预测的基降阶法. 《计算力学学报》.
3. Zeyu Deng, Geng-Dong Cheng, Yuan Liang (2026). Multi-material discrete variable topology optimization by order-independent random discrete steepest descent algorithm considering poor or conflicting material selections. Computer Methods in Applied Mechanics and Engineering.DOI
4. Kai Sun, Gengdong Cheng, Ming Zhou, Gokhan Serhat (2026). Advanced sequential conservative integer programming for discrete-variable topology optimization involving multiple nonlinear constraints. Computers & Structures.DOI
5. Mingshuo Zhang, Yuan Liang, Xu Guo, Gengdong Cheng (2026). Exponentially convergent extended multiscale finite element method (EC-EMsFEM) for heterogeneous elasticity problems in irregular domains. Computer Methods in Applied Mechanics and Engineering.DOI
6. Jun Yan, Zhihui Liu, Gengdong Cheng, Junjie Wang, Xuyi Chen, Cihai Luo, Yinghao Nie (2026). A data-driven concurrent multiscale FE-FCA method for the elastoplastic nonlinear mechanical response prediction of large-scale composite structures. Computer Methods in Applied Mechanics and Engineering.DOI
7. Yuan Liang, Gengdong Cheng (2025). Review of discrete variable topology optimization by sequential approximate integer programming. Engineering Optimization, Vol. 570, No. 1.DOI
8. 孙凯，程耿东，Gokhan Serhat（2025）. 基于离散变量拓扑优化和层合参数插值的变刚度层合板优化设计方法. 《中国力学大会-2025摘要集（第二册）》.DOI
9. 梁缘，邓泽玉，程耿东（2025）. 考虑离散无序类别变量的大规模拓扑优化方法研究. 《中国力学大会-2025摘要集（第二册）》.DOI
10. 张谦，程耿东，宫秀臣，聂英豪（2025）. 基于FCA安定性分析与周期性格林函数的非均质材料强度快速预测. 《中国力学大会-2025摘要集（第二册）》.DOI
11. 张茗硕，梁缘，程耿东（2025）. 指数收敛的物理信息完整嵌入的多尺度有限元方法及高精度多分辨率离散变量拓扑优化的应用. 《中国力学大会-2025摘要集（第二册）》.DOI
12. Qian Zhang, Gengdong Cheng, Xiuchen Gong, Yinghao Nie (2025). Fast effective strength prediction of heterogeneous materials by FCA-based basis reduction method and periodic Green’s function. Composite structures.DOI
13. Zheng Li, Yinghao Nie, Gengdong Cheng (2025). FCA method for predicting effective viscosity of particle reinforced thermoplastic melt and a metric for measuring clusters. Computer Methods in Applied Mechanics and Engineering.DOI
14. Yinghao Nie, Xiuchen Gong, Gengdong Cheng, Qian Zhang (2025). Data-driven FEM cluster-based basis reduction method for ultimate load-bearing capacity prediction of structures under variable loads. Computers & Structures.DOI
15. Xiuchen Gong, Gengdong Cheng, Qian Zhang, Zheng Li, Yinghao Nie (2025). Structural shakedown analysis considering temperature-dependent yield stress and varying thermomechanical loads based on data-driven FEM Cluster-based basis reduction method. Engineering structures.DOI
16. Kai Sun, Geng-Dong Cheng, Gokhan Serhat (2025). Integrating discrete-variable anisotropic topology optimization with lamination parameter interpolation-based stiffness tailoring. Computer Methods in Applied Mechanics and Engineering.DOI
17. Jie Pan, Jingwei Huang, Gengdong Cheng, Yong Zeng (2025). Sampling balanced high-quality data to train an automatic mesh generator. Artificial intelligence for engineering design analysis and manufacturing.DOI
18. 程耿东，亢战（2024）. “纪念钟万勰院士九十诞辰暨《计算力学学报》创刊四十周年”专刊序言. 《计算力学学报》.
19. 程耿东，郭旭，陈悦（2024）. 技术科学:缘起、历史演进和新时代的国别差异. 《科教发展研究》.
20. Xiuchen Gong, Yinghao Nie, Gengdong Cheng (2024). A FEM cluster-based basis reduction method for shakedown analysis of heterogeneous materials. Computational Mechanics.DOI
21. Yize Li, Qing-Yuan Hu, Gengdong Cheng (2024). Template mapping method for plane quadrilateral mesh generation with controllable density transitions. Engineering Reports.DOI
22. Yinghao Nie, Zheng Li, Xiuchen Gong, Gengdong Cheng (2024). Fast construction of cluster interaction matrix for data-driven cluster-based reduced-order model and prediction of elastoplastic stress-strain curves and yield surface. Computer Methods in Applied Mechanics and Engineering.DOI
23. Zeyu Deng, Yuan Liang, Geng-Dong Cheng (2024). Discrete variable topology optimization for maximizing single/multiple natural frequencies and frequency gaps considering the topological constraint. International Journal for Numerical Methods in Engineering.DOI
24. Kai Sun, Geng-Dong Cheng, Yuan Liang (2024). Topological derivative based sensitivity analysis for three-dimensional discrete variable topology optimization. Computer Methods in Applied Mechanics and Engineering.DOI
25. Xin-Yu Yan, Yuan Liang, Geng-Dong Cheng, Yu Pan, Xian-Hui Cai (2024). Optimized topology design of finned ducts for internal flow thermal performance by discrete variable eigenvalue-related optimization. Structural And Multidisciplinary Optimization.DOI
26. Zeyu Deng, Yuan Liang, Geng-Dong Cheng (2024). Multi-Material Topology optimization via Stochastic Discrete Steepest Descent Multi-Valued Integer Programming. The International Conference on Computational & Experimental Engineering and Sciences.DOI
27. Zeyu Deng, Zhenzeng Lei, Geng-Dong Cheng, Yuan Liang (2024). Approach for multi-valued integer programming in multi-material topology optimization: Random discrete steepest descent (RDSD) algorithm. Computer Methods in Applied Mechanics and Engineering.DOI
28. Zhenzeng Lei, Yuan Liang, Geng-Dong Cheng, Di-Xiong Yang, Guohai Chen (2024). Stress-related discrete variable topology optimization with handling non-physical stress concentrations. Computer Methods in Applied Mechanics and Engineering.DOI
29. Kai Li, Mathias Wallin, Matti Ristinmaa, Gengdong Cheng (2024). A “poor-man’s” deformation plasticity based approach to topology optimization of elastoplastic structures. International Journal of Solids and Structures.DOI
30. 王运宇，阎琨，蔡贤辉，潘余，孙国，陈健，程耿东，刘卫东（2023）. 基于COMSOL的简化对流传热结构拓扑优化方法. 《计算力学学报》.
31. 程耿东（2023）. 周期材料与结构等效性质预测与优化. 《科学出版社》.
32. Xiuchen Gong, Yinghao Nie, Gengdong Cheng, Kai Li (2023). Effect of boundary conditions on shakedown analysis of heterogeneous materials. Applied Mathematics and Mechanics.DOI
33. Kai Sun, Gengdong Cheng, Kaiqing Zhang, Yuan Liang (2023). Sequential conservative integer programming method for multi-constrained discrete variable structure topology optimization. Acta Mechanica Sinica.DOI
34. Kai Li, Yu Wang, Gengdong Cheng, Kun Yan, Xianhui Cai, Yu Pan (2023). Thermomechanical shakedown analysis considering temperature-dependent yield stress based on the primal-dual eigenstress-driven method. International Journal of Mechanical Sciences.DOI
35. Kun Yan, Yunyu Wang, Yu Pan, Guo Fu Sun, Jian Chen, Xianhui Cai, Gengdong Cheng (2023). Topology optimization of simplified convective heat transfer problems using the finite volume method. Science China Technological Sciences.DOI
36. 张君茹，程耿东（2022）. 基于二次型性能指标定轴转动板减振拓扑优化. 《计算力学学报》.
37. Kaiqing Zhang, Gengdong Cheng (2022). Structural topology optimization with four additive manufacturing constraints by two-phase self-supporting design. Structural and Multidisciplinary Optimization.DOI
38. Jie Pan, Jingwei Huang, Gengdong Cheng, Yong Zeng (2022). Reinforcement learning for automatic quadrilateral mesh generation: A soft actor–critic approach. Neural Networks.DOI
39. Kai Sun, Yuan Liang, Gengdong Cheng (2022). Sensitivity analysis of discrete variable topology optimization. Structural and Multidisciplinary Optimization.DOI
40. Jian Hua Zhao, Chengjie Guo, Xiubin Zuo, Allen Jonathan Román, Yinghao Nie, Dong‐Xiao Su, Lih‐Sheng Turng, Tim Andreas Osswald, Gengdong Cheng, Weidong Chen (2022). Effective mechanical properties of injection-molded short fiber reinforced PEEK composites using periodic homogenization. Advanced Composites and Hybrid Materials.DOI
41. Kai Li, Gengdong Cheng (2022). Structural topology optimization of elastoplastic continuum under shakedown theory. International Journal for Numerical Methods in Engineering.DOI
42. Kaiqing Zhang, Gengdong Cheng, Yu Wang (2022). Structural topology optimization subject to overhang angle constraint with overhang length relaxation in additive manufacturing. Science China Technological Sciences.DOI
43. Zheng Li, Yinghao Nie, Gengdong Cheng (2022). Mathematical foundations of FEM-cluster based reduced order analysis method and a spectral analysis algorithm for improving the accuracy. Computational Mechanics.DOI
44. Kai Li, Gengdong Cheng (2022). A nested algorithm of truss topology optimization for maximum plastic shakedown loading capacity. Journal of Computational Design and Engineering.DOI
45. 杨迪雄，陈国海，程耿东，张亚辉（2021）. 大型结构非线性随机动力学分析的直接概率积分法. 《第十八届全国非线性振动暨第十五届全国非线性动力学和运动稳定性学术会议（NVND2021）》.DOI
46. 栾宇，关振群，程耿东，阳志光，冯韶伟（2021）. 螺栓法兰连接结构的拉压不同刚度动力学模型. 《导弹与航天运载技术(中英文)》.
47. Xin-Yu Yan, Yuan Liang, Geng-Dong Cheng (2021). Discrete variable topology optimization for simplified convective heat transfer via sequential approximate integer programming with trust‐region. International Journal for Numerical Methods in Engineering.DOI
48. Yuan Liang, Xinyu Yan, Gengdong Cheng (2021). Explicit control of 2D and 3D structural complexity by discrete variable topology optimization method. Computer Methods in Applied Mechanics and Engineering.DOI
49. Nam Ho Kim, Néstor V. Queipo, Felipe Antonio Chegury Viana, Palaniappan Ramu, Erdem Acar, Helder C. Rodrigues, Gengdong Cheng, Ming Zhou (2021). Special issue dedicated to Former Editor-in-Chief Raphael T. Haftka. Structural and Multidisciplinary Optimization.DOI
50. Yuan Liang, Kai Sun, Gengdong Cheng (2021). Correction to: Discrete variable topology optimization for compliant mechanism design via Sequential Approximate Integer Programming with Trust Region (SAIP-TR). Structural and Multidisciplinary Optimization.DOI
51. Zheng Li, Heng Liu, Gengdong Cheng, Yiming Zhou (2021). A diversity metric based on Gaussian process model for diverse and competitive design. Structural and Multidisciplinary Optimization.DOI
52. Yinghao Nie, Zheng Li, Gengdong Cheng (2021). Efficient prediction of the effective nonlinear properties of porous material by FEM-Cluster based Analysis (FCA). Computer Methods in Applied Mechanics and Engineering.DOI
53. Gengdong Cheng, Ming Zhou (2021). Correction to: Thank you to our reviewers. Structural and Multidisciplinary Optimization.DOI
54. Jie Pan, Jingwei Huang, Yunli Wang, Gengdong Cheng, Yong Zeng (2021). A self-learning finite element extraction system based on reinforcement learning. Artificial intelligence for engineering design analysis and manufacturing.DOI
55. Kai Li, Gengdong Cheng, Yu Wang, Yuan Liang (2021). A novel primal‐dual eigenstress‐driven method for shakedown analysis of structures. International Journal for Numerical Methods in Engineering.DOI
56. Gengdong Cheng, Ming Zhou (2021). Thank you to our Reviewers. Structural and Multidisciplinary Optimization.DOI
57. 聂英豪，程耿东，李征（2020）. 预测复合材料有效性质的聚类有限元分析及相互作用矩阵性质研究. 《大连理工大学学报》.
58. 张君茹，程耿东（2020）. 绝对节点坐标法下斜率不连续问题处理方法讨论. 《动力学与控制学报》.
59. 程耿东（2020）. 求实创新,砥砺前行——《大连理工大学学报》创刊70周年寄语. 《大连理工大学学报》.
60. Yuang Liang, Kai Sun, Gengdong Cheng (2020). Discrete variable topology optimization for compliant mechanism design via Sequential Approximate Integer Programming with Trust Region (SAIP-TR). Structural and Multidisciplinary Optimization.DOI
61. Kaiqing Zhang, Gengdong Cheng (2020). Three-dimensional high resolution topology optimization considering additive manufacturing constraints. Additive manufacturing.DOI
62. Junru Zhang, Gengdong Cheng, Boping Wang (2020). Vibration reduction of rotating frame structure based on quadratic performance index. Journal of Sound and Vibration.DOI
63. Jian Hua Zhao, Dong‐Xiao Su, Jin-ming Yi, Gengdong Cheng, Lih‐Sheng Turng, Tim Andreas Osswald (2020). The effect of micromechanics models on mechanical property predictions for short fiber composites. Composite Structures.DOI
64. Heng Liu, Jie Hong, Shilun Ruan, Zheng Li, Gengdong Cheng (2020). A Model accounting for Stiffness Weakening of Curvic Couplings under Various Loading Conditions. Mathematical Problems in Engineering.DOI
65. Yuan Liang, Gengdong Cheng (2019). Further elaborations on topology optimization via sequential integer programming and Canonical relaxation algorithm and 128-line MATLAB code. Structural and Multidisciplinary Optimization.DOI
66. Liang Xu, Gengdong Cheng (2019). On the solutions to the Saint–Venant problem of heterogeneous beam-like structures with periodic microstructures. International Journal of Mechanical Sciences.DOI
67. Hengyang Li, Orion L. Kafka, Jiaying Gao, Cheng Yu, Yinghao Nie, Lei Zhang, Mahsa Tajdari, Shan Tang, Xu Guo, Gang Li, Shaoqiang Tang, Gengdong Cheng, Wing Kam Liu (2019). Clustering discretization methods for generation of material performance databases in machine learning and design optimization. Computational Mechanics.DOI
68. Yinghao Nie, Gengdong Cheng, Xikui Li, Liang Xu, Kai Li (2019). Principle of cluster minimum complementary energy of FEM-cluster-based reduced order method: fast updating the interaction matrix and predicting effective nonlinear properties of heterogeneous material. Computational Mechanics.DOI
69. Gengdong Cheng, Xikui Li, Yinghao Nie, Hengyang Li (2019). FEM-Cluster based reduction method for efficient numerical prediction of effective properties of heterogeneous material in nonlinear range. Computer Methods in Applied Mechanics and Engineering.DOI
70. Yuan Liang, Gengdong Cheng (2019). Topology optimization via sequential integer programming and Canonical relaxation algorithm. Computer Methods in Applied Mechanics and Engineering.DOI
71. 孙国，阎琨，蔡贤辉，程耿东（2018）. 采用包络-准则法优化考虑瞬态传热的薄板结构. 《计算力学学报》.
72. 陈飙松，张力丹，鲁一南，程耿东（2018）. 结构优化半解析灵敏度分析的改进算法. 《计算力学学报》.
73. 鲁一南，程耿东，刘晓峰（2018）. 高柔风电塔残余振动控制优化设计. 《大连理工大学学报》.
74. Kaiqing Zhang, Gengdong Cheng, Liang Xu (2018). Topology optimization considering overhang constraint in additive manufacturing. Computers & Structures.DOI
75. Jian Hua Zhao, Gengdong Cheng (2018). Sequential kriging‐based closure approximations for flow‐induced fiber orientation and prediction of composite stiffness. Polymer Composites.DOI
76. Qingyuan Hu, Franz Chouly, Ping Hu, Gengdong Cheng, Stéphane Bordas (2018). Skew-symmetric Nitsche’s formulation in isogeometric analysis: Dirichlet and symmetry conditions, patch coupling and frictionless contact. Computer Methods in Applied Mechanics and Engineering.DOI
77. Liang Xu, Gengdong Cheng (2018). Two-scale concurrent topology optimization with multiple micro materials based on principal stress orientation. Structural and Multidisciplinary Optimization.DOI
78. Ming Zhou, Zhifan Luo, Ping Yi, Gengdong Cheng (2018). A two-phase approach based on sequential approximation for reliability-based design optimization. Structural and Multidisciplinary Optimization.DOI
79. 陈祖煜，程耿东，杨春和（2017）. 关于我国重大基础设施工程安全相关科研工作的思考. 《《土木工程学报》——2017“论坛”汇编》.
80. 李玉韦，王博，程耿东（2017）. 基于新型降阶模型的网格加筋圆柱壳频率分析. 《宇航总体技术》.
81. Kun Yan, Gengdong Cheng (2017). An adjoint method of sensitivity analysis for residual vibrations of structures subject to impacts. Journal of Sound and Vibration.DOI
82. Liang Xu, Gengdong Cheng (2017). Two-Scale Concurrent Topology Optimization with Multiple Micro Materials Based on Principal Stress Direction. Springer eBooks.DOI
83. Gengdong Cheng (2017). Structural Optimization, the past, present and future.
84. MO Yi-hua, Gengdong Cheng, Bing Wang, Xiaohong Wang (2017). The effects of delamination deficiencies on compressive properties of composite grid-stiffened structures. Mechanics of Advanced Materials and Structures.DOI
85. 杨迪雄，程耿东（2016）. 《铁摩辛柯奖获得者演讲集:力学·教育·创新》. 《力学与实践》.
86. 程耿东，林家浩（2016）. 《悬索桥近似分析》的研究风格. 《计算力学学报》.
87. 程耿东，徐向东，刘晓峰（2016）. 基于频率控制的多约束风电塔优化方法. 《大连理工大学学报》.
88. 易斯男，程耿东，徐亮（2016）. 一维周期性梁结构等效性能计算方法讨论. 《计算力学学报》.
89. 阎琨，刘晓德，程耿东（2016）. 组合结构的残余振动最小化结构优化设计. 《北京工业大学学报》.
90. Ming Zhou, Grégoire Allaire, Gengdong Cheng, Jianbin Du, Matthew Gilbert, Xu Guo, James K. Guest, Raphael T. Haftka, Hyunsun Alicia Kim, Tomasz Lewiński, Kurt K. Maute, Julián A. Norato, Niels Olhoff, Gláucio H. Paulino, Tomasz Sokół, Michael Wang, Ren‐Jye Yang, Byeng Dong Youn (2016). Special issue dedicated to Founding Editor George Rozvany. Structural and Multidisciplinary Optimization.DOI
91. Gengdong Cheng, Liang Xu (2016). Two-scale topology design optimization of stiffened or porous plate subject to out-of-plane buckling constraint. Structural and Multidisciplinary Optimization.DOI
92. Sinan Yi, Gengdong Cheng, Liang Xu (2016). Stiffness design of heterogeneous periodic beam by topology optimization with integration of commercial software. Computers & Structures.DOI
93. Yiming Zhou, Raphael T. Haftka, Gengdong Cheng (2016). Balancing diversity and performance in global optimization. Structural and Multidisciplinary Optimization.DOI
94. Liang Xu, Gengdong Cheng (2016). Shear stiffness prediction of Reissner–Mindlin plates with periodic microstructures. Mechanics of Advanced Materials and Structures.DOI
95. B. P. Wang, Gengdong Cheng (2016). Can damping be ignored in transient structural dynamic optimization? Structural and Multidisciplinary Optimization.DOI
96. Jun Yan, Xu Guo, Gengdong Cheng (2016). Multi-scale concurrent material and structural design under mechanical and thermal loads. Computational Mechanics.DOI
97. 易斯男，程耿东（2015）. 基于板壳均匀化新方法的蜂窝板结构宏微观协同优化设计. 《中国力学大会-2015论文摘要集》.
98. 周昳鸣，张君茹，周才华，王博，程耿东（2015）. 汽车吸能管的多样性可竞争解优化设计. 《中国力学大会-2015论文摘要集》.
99. 倪晓琴，程耿东（2015）. 热荷载作用下薄板的优化设计. 《应用数学和力学》.
100. 周昳鸣，张君茹，程耿东（2015）. 基于Kriging代理模型的两类全局优化算法比较. 《计算力学学报》.
101. 阎琨，程耿东（2015）. 惯性释放法在结构耐撞性拓扑优化中的应用和改进. 《计算力学学报》.
102. 易斯男，王博，王立朋，程耿东（2015）. 基于SimXpert实现ProE模型向CAE模型快速转化的模板开发. 《计算机辅助工程》.
103. 王文胜，程耿东，郝鹏（2015）. 基于超梁降阶模型的蒙皮加筋圆柱壳频率分析. 《固体火箭技术》.
104. Kun Yan, Gengdong Cheng, Bo Ping Wang (2015). Topology optimization of plate structures subject to initial excitations for minimum dynamic performance index. Structural and Multidisciplinary Optimization.DOI
105. Jian Hua Zhao, Hengyang Li, Gengdong Cheng, Yuanwu Cai (2015). On predicting the effective elastic properties of polymer nanocomposites by novel numerical implementation of asymptotic homogenization method. Composite Structures.DOI
106. Kun Yan, Gengdong Cheng, Bo Ping Wang (2015). Adjoint methods of sensitivity analysis for Lyapunov equation. Structural and Multidisciplinary Optimization.DOI
107. Jian Hua Zhao, Gengdong Cheng (2015). An Innovative Surrogate-Based Searching Method for Reducing Warpage and Cycle Time in Injection Molding. Advances in Polymer Technology.DOI
108. Shutian Liu, Quhao Li, Wenjiong Chen, Liyong Tong, Gengdong Cheng (2015). An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures. Frontiers of Mechanical Engineering.DOI
109. Sinan Yi, Liang Xu, Gengdong Cheng, Yuanwu Cai (2015). FEM formulation of homogenization method for effective properties of periodic heterogeneous beam and size effect of basic cell in thickness direction. Computers & Structures.DOI
110. Gengdong Cheng, Na Yu, Niels Olhoff (2015). Optimum design of thermally loaded beam-columns for maximum vibration frequency or buckling temperature. International Journal of Solids and Structures.DOI
111. Liang Xu, Gengdong Cheng, Sinan Yi (2015). A new method of shear stiffness prediction of periodic Timoshenko beams. Mechanics of Advanced Materials and Structures.DOI
112. Jian Hua Zhao, Gengdong Cheng, Shilun Ruan, Zheng Li (2015). Multi-objective optimization design of injection molding process parameters based on the improved efficient global optimization algorithm and non-dominated sorting-based genetic algorithm. The International Journal of Advanced Manufacturing Technology.DOI
113. 李取浩，王文胜，程耿东（2014）. 基于梁理论的复杂梁式结构低阶频率快速求解方法. 《工程力学》.
114. 刘晓峰，程耿东（2014）. 基于自动分组遗传算法的建筑结构体系与构件尺寸协同优化设计. 《计算力学学报》.
115. 徐亮，程耿东（2014）. 具有周期微结构Timoshenko梁剪切刚度的新数值求解方法. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
116. 张家鑫，王博，牛飞，程耿东（2014）. 分级型放射肋短壳结构集中力扩散优化设计. 《计算力学学报》.
117. 倪长辉，阎军，程耿东，郭旭（2014）. 频带约束下刚架结构优化问题可行域研究. 《大连理工大学学报》.
118. 蔡园武，徐亮，程耿东（2014）. 正六角形单胞周期性蜂窝板等效刚度研究. 《大连理工大学学报》.
119. Rui Li, Xiaoqin Ni, Gengdong Cheng (2014). Symplectic Superposition Method for Benchmark Flexure Solutions for Rectangular Thick Plates. Journal of Engineering Mechanics.DOI
120. Jiaxin Zhang, Bo Wang, Fei Niu, Gengdong Cheng (2014). Design Optimization of Connection Section for Concentrated Force Diffusion. Mechanics Based Design of Structures and Machines.DOI
121. Yiming Zhou, Anirban Chaudhuri, Raphael T. Haftka, Gengdong Cheng (2014). Global Search for Diverse Competitive Designs. AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO).DOI
122. Xu Guo, Zongliang Du, Gengdong Cheng (2014). A confirmation of a conjecture on the existence of symmetric optimal solution under multiple loads. Structural and Multidisciplinary Optimization.DOI
123. Gengdong Cheng, Wensheng Wang (2014). Fast Dynamic Analysis of Complicated Beam-Type Structure Based on Reduced Super Beam Model. AIAA Journal.DOI
124. Changhui Ni, Jun Yan, Gengdong Cheng, Xu Guo (2014). Integrated size and topology optimization of skeletal structures with exact frequency constraints. Structural and Multidisciplinary Optimization.DOI
125. Wensheng Wang, Gengdong Cheng, Quhao Li (2013). Fast dynamic performance optimization of complicated beam-type structures based on two new reduced physical models. Engineering Optimization, Vol. 450, No. 7.DOI
126. 牛飞，梅帅，张盛，陈飙松，程耿东（2013）. 基于SiPESC平台的拓扑优化模块开发及应用. 《大连理工大学学报》.
127. 张家鑫，赵建，程耿东（2013）. 低速冲击下注塑成型保险杠的耐撞性能研究. 《中国力学大会——2013论文摘要集》.
128. 程耿东（2013）. 结构拓扑优化的基本思想及其发展展望. 《中国力学大会——2013论文摘要集》.
129. 彭海军，王文胜，程耿东（2013）. 基于物理降阶模型的桁架结构振动主动控制. 《工程力学》.
130. 阎琨，程耿东（2013）. 一种用于汽车耐撞性拓扑优化问题的混合法. 《中国力学大会——2013论文摘要集》.
131. 郭旭，杜宗亮，程耿东（2013）. 结构优化的对称性问题研究. 《中国力学大会——2013论文摘要集》.
132. Yuanwu Cai, Liang Xu, Gengdong Cheng (2013). Novel numerical implementation of asymptotic homogenization method for periodic plate structures. International Journal of Solids and Structures.DOI
133. Fei Niu, Gengdong Cheng (2013). Analytic solutions of elastically supported Michell trusses. Structural and Multidisciplinary Optimization.DOI
134. Gengdong Cheng, Yuanwu Cai, Liang Xu (2013). Novel implementation of homogenization method to predict effective properties of periodic materials. Acta Mechanica Sinica.DOI
135. Ping Yi, Gengdong Cheng, Lin Xu (2013). Efficient algorithm for probability-based design optimisation of complex structures and related issues. Structure and Infrastructure Engineering.DOI
136. Xu Guo, Zongliang Du, Gengdong Cheng, Changhui Ni (2013). Symmetry properties in structural optimization: some extensions. Structural and Multidisciplinary Optimization.DOI
137. Fei Niu, Shuai MEI, Zhang Sheng, Chen Biaosong, Gengdong Cheng (2013). Development and application of topology optimization module based on SiPESC. Dalian Ligong Daxue xuebao.
138. 王文胜，程耿东，李取浩（2012）. 基于梁平截面假设的复杂细长结构动力模型简化方法. 《计算力学学报》.
139. 邓佳东，程耿东（2012）. 基于局部插值的结构动力模型降阶方法. 《力学学报》.
140. 牛飞，王博，程耿东（2012）. 基于拓扑优化技术的集中力扩散结构设计. 《力学学报》.
141. 程耿东，于娜，王斌（2012）. 热荷载下梁基频和热屈曲临界变温优化设计. 《大连理工大学学报》.
142. 刘晓峰，程耿东（2012）. 桩基础优化设计的模块化方法. 《计算力学学报》.
143. 程耿东（2012）. 工程结构优化设计基础. 《大连理工大学出版社》.
144. Jiadong Deng, Jun Yan, Gengdong Cheng (2012). Multi-objective concurrent topology optimization of thermoelastic structures composed of homogeneous porous material. Structural and Multidisciplinary Optimization.DOI
145. Xiaofeng Liu, Gengdong Cheng, Bo Wang, Shu-Zhi Lin (2012). Optimum Design of Pile Foundation by Automatic Grouping Genetic Algorithms. ISRN Civil Engineering.DOI
146. Niels Olhoff, Bin Niu, Gengdong Cheng (2012). Design for maximum band-gaps in beam structures. VBN Forskningsportal (Aalborg Universitet).
147. Niels Olhoff, Bin Niu, Gengdong Cheng (2012). Optimum design of band-gap beam structures. International Journal of Solids and Structures.DOI
148. Xu Guo, Changhui Ni, Gengdong Cheng, Zongliang Du (2012). Some symmetry results for optimal solutions in structural optimization. Structural and Multidisciplinary Optimization.DOI
149. Gengdong Cheng (2012). Modular method of pile foundation design optimization. Jisuan lixue xuebao.
150. 王文胜，徐胜利，程耿东（2011）. 基于简化模型的结构动力特性优化. 《工程力学》.
151. 阎军，邓佳东，程耿东（2011）. 基于柔顺性与热变形双目标的多孔材料与结构几何多尺度优化设计. 《固体力学学报》.
152. 关振群，宋洋，杨树华，刘万青，吕军，王鄢，程耿东（2011）. 离心压缩机叶轮静强度分析方法. 《大连理工大学学报》.
153. 刘晓峰，阎军，程耿东（2011）. 采用自动分组遗传算法的频率约束下桁架拓扑优化. 《计算力学学报》.
154. Bin Wang, Jun Yan, Gengdong Cheng (2011). Optimal structure design with low thermal directional expansion and high stiffness. Engineering Optimization, Vol. 430, No. 6.DOI
155. Zhan Kang, Xiaopeng Zhang, Shigang Jiang, Gengdong Cheng (2011). On topology optimization of damping layer in shell structures under harmonic excitations. Structural and Multidisciplinary Optimization.DOI
156. Yu Luan, Zhenqun Guan, Gengdong Cheng, Song Liu (2011). A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange joints. Journal of Sound and Vibration.DOI
157. Xiaofeng Liu, Gengdong Cheng, Jun Yan, Lei Jiang (2011). Singular optimum topology of skeletal structures with frequency constraints by AGGA. Structural and Multidisciplinary Optimization.DOI
158. Gengdong Cheng, Xiaofeng Liu (2011). Discussion on symmetry of optimum topology design. Structural and Multidisciplinary Optimization.DOI
159. Gengdong Cheng (2011). Topology optimization of skeletal structures with frequency constraints based on automatic grouping genetic algorithm. Jisuan lixue xuebao.
160. 倪长辉，阎军，程耿东，郭旭（2010）. 精确频率约束下框架结构的尺寸优化. 《固体力学学报》.
161. 王斌，于娜，程耿东（2010）. 热载荷下结构动力特性的优化设计. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）》.
162. 徐胜利，程耿东（2010）. 基于自适应网格的材料渗透系数设计. 《力学学报》.
163. 程耿东，侧卫（2010）. 程耿东 著名工程力学、计算力学专家. 《航空制造技术》.
164. 王斌，阎军，程耿东（2010）. 特定方向“零膨胀”的最小柔顺性结构优化设计. 《计算力学学报》.
165. 徐胜利，牛斌，程耿东（2010）. 材料设计的晶核法. 《固体力学学报》.
166. 王斌，程耿东，王跃方（2010）. 失谐对耦合摆链结构振动特性的影响. 《机械强度》.
167. Xu Guo, Gengdong Cheng (2010). Recent development in structural design and optimization. Acta Mechanica Sinica.DOI
168. Gengdong Cheng (2010). Twenty-five years of excellence: a retrospective glance of Acta Mechanica Sinica. Acta Mechanica Sinica.DOI
169. Jun Zhang, Gengdong Cheng (2010). Numerical Simulation and Optimization Design on Acoustic Absorbent Lining. International Conference on Information Engineering and Computer Science.DOI
170. Fei Niu, Shengli Xu, Gengdong Cheng (2010). A general formulation of structural topology optimization for maximizing structural stiffness. Structural and Multidisciplinary Optimization.DOI
171. Shengli Xu, Gengdong Cheng (2010). Erratum to: Optimum material design of minimum structural compliance under seepage constraint. Structural and Multidisciplinary Optimization.DOI
172. Yu Luan, Zhenqun Guan, Gengdong Cheng (2010). The study on nonlinear dynamic behaviors of the structures with bolted-flange joint. IOP Conference Series Materials Science and Engineering.DOI
173. Bin Niu, Niels Olhoff, Erik G. Lund, Gengdong Cheng (2010). Discrete material optimization of vibrating laminated composite plates for minimum sound radiation. International Journal of Solids and Structures.DOI
174. Gengdong Cheng (2010). Memorial to Xuesen Qian. Acta Mechanica Sinica.DOI
175. Gengdong Cheng (2010). Multi-objective optimization of low structural compliance and thermal directional expansion. Jisuan lixue xuebao.
176. 牛斌，阎军，程耿东（2009）. 周期性蜂窝材料微极等效模型及其应力优化. 《中国力学学会学术大会'2009论文摘要集》.
177. 徐胜利，程耿东（2009）. 基于自适应网格的结构拓扑优化. 《大连理工大学学报》.
178. 刘晓峰，蔡贤辉，程耿东（2009）. 砌体结构震害及农村房屋加固的锚固拉结方法. 《大连理工大学学报》.
179. 牛飞，徐胜利，王博，程耿东（2009）. 基于超单元的复杂结构拓扑优化设计. 《中国力学学会学术大会'2009》.
180. 程耿东，宋洋（2009）. 基于自平衡残余应力场的结构安定性分析. 《中国力学学会学术大会'2009》.
181. 牛斌，阎军，程耿东（2009）. 三维类桁架材料结构弹塑性分析. 《大连理工大学学报》.
182. 阎军，程耿东，刘岭（2009）. 基于均匀材料微结构模型的热弹性结构与材料并发优化. 《计算力学学报》.
183. 徐胜利，蔡园武，牛飞，程耿东（2009）. 拓扑优化中的体积守恒型密度过滤方法. 《中国力学学会学术大会'2009》.
184. 蔡贤辉，李刚，程耿东（2009）. 提高砌体结构抗震能力对策及问题. 《大连理工大学学报》.
185. 林树枝，李刚，程耿东（2009）. 提高学校建筑抗震能力的对策建议. 《大连理工大学学报》.
186. 杨卫，顾秉林，朱清时，程耿东，严陆光，杨叔子，张泽（2009）. 关于科学与工程教育创新的建议. 《中国科学院院刊》.
187. Shengli Xu, Yuanwu Cai, Gengdong Cheng (2009). Volume preserving nonlinear density filter based on heaviside functions. Structural and Multidisciplinary Optimization.DOI
188. Shengli Xu, Gengdong Cheng (2009). Optimum material design of minimum structural compliance under seepage constraint. Structural and Multidisciplinary Optimization.DOI
189. Jun Zhang, Gengdong Cheng (2009). Optimization Design of Plate on Vibration and Acoustics Based on Finite Element Simulation. International Joint Conference on Computational Sciences and Optimization (CSO).DOI
190. Gengdong Cheng (2009). Structural topology optimization based on adaptive mesh. Dalian Ligong Daxue xuebao.
191. Gengdong Cheng (2009). Earthquake damage of masonry buildings and anchorage-tie strengthening method for rural houses. Dalian Ligong Daxue xuebao.
192. Gengdong Cheng (2009). Countermeasures and problems for seismic enhancement of masonry structures. Dalian Ligong Daxue xuebao.
193. Gengdong Cheng (2009). Elasto-plastic analysis for 3D structures with truss-like material. Dalian Ligong Daxue xuebao.
194. 牛斌，阎军，程耿东（2008）. 周期性蜂窝材料微极等效模型及其微观应力的一种快速算法. 《固体力学学报》.
195. 刘岭，阎军，程耿东（2008）. 考虑均一微结构的结构/材料两级协同优化. 《计算力学学报》.
196. 蔡贤辉，李刚，程耿东（2008）. 重视砌体结构的抗震构造和加固技术的研究和推广. 《汶川地震建筑震害分析与重建研讨会》.
197. 吴承伟，关振群，郭杏林，程耿东，王学军，戴继双，张勇，杨树华（2008）. 大型离心压缩机叶轮叶片疲劳可靠性分析. 《装备制造技术》.
198. 程耿东，刘则渊（2008）. 高等工程教育中的技术科学课程体系——钱学森的技术科学思想与工程教育. 《科学学理论与科学计量学探索——全国科学技术学暨科学学理论与学科建设2008年联合年会论文集》.
199. 程耿东，陈飙松（2008）. CAE应向专业化、傻瓜化发展. 《机械设计与制造工程》.
200. 王博，牛斌，程耿东（2008）. 二维Kagome点阵材料的多功能设计. 《第十五届全国复合材料学术会议论文集（下册）》.
201. Jun Yan, Gengdong Cheng, Ling Liu (2008). A Uniform Optimum Material Based Model for Concurrent Optimization of Thermoelastic Structures and Materials. International Journal for Simulation and Multidisciplinary Design Optimization.DOI
202. Bin Niu, Jun Yan, Gengdong Cheng (2008). Optimum structure with homogeneous optimum cellular material for maximum fundamental frequency. Structural and Multidisciplinary Optimization.DOI
203. Xiong Zhang, Gengdong Cheng, Hui Zhang (2008). Numerical investigations on a new type of energy-absorbing structure based on free inversion of tubes. International Journal of Mechanical Sciences.DOI
204. Gengdong Cheng, Ling Liu, Jun Yan (2008). Optimum Structure with Homogeneous Optimum Truss-like Material. Springer eBooks.DOI
205. Ling Liu, Jun Yan, Gengdong Cheng (2008). Optimum structure with homogeneous optimum truss-like material. Computers & Structures.DOI
206. Xiong Zhang, Gengdong Cheng, Bo Wang, Hui Zhang (2008). Optimum design for energy absorption of bitubal hexagonal columns with honeycomb core. International Journal of Crashworthiness.DOI
207. Gengdong Cheng (2008). Structure-Material concurrent optimization considering uniform material microstructure. Jisuan lixue xuebao.
208. 王博，徐胜利，张雄，程耿东（2007）. 2D周期性蜂窝结构面内静动态压缩力学行为研究. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（下）》.
209. 程耿东（2007）. 轻量化和结构优化. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（上）》.
210. 梅玉林，王晓明，程耿东（2007）. 基于离散变量的拓扑优化方法. 《应用数学和力学》.
211. 徐胜利，程耿东，贾海昌（2007）. 多孔材料渗透系数性能设计. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007》.
212. 阎军，刘岭，程耿东（2007）. 基于模块拼装的结构/材料一体化优化设计. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007》.
213. 王博，牛斌，程耿东（2007）. 正交各向异性蜂窝结构多功能优化设计. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007》.
214. 杨迪雄，易平，程耿东（2007）. 结构优化和可靠度分析迭代算法的混沌动力学分析和控制. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007》.
215. 刘岭，阎军，程耿东（2007）. 二维类桁架材料结构弹塑性分析. 《力学学报》.
216. 刘岭，阎军，程耿东（2007）. 考虑内部胞元能量等效的代表体元法. 《固体力学学报》.
217. 王博，王斌，程耿东（2007）. Kagome蜂窝夹层平板的多功能优化设计. 《复合材料学报》.
218. Yulin Mei, Xiaoming Wang, Gengdong Cheng (2007). Binary discrete method of topology optimization. Applied Mathematics and Mechanics.DOI
219. 程耿东（2007）. 走进结构拓扑优化. 《智能制造》.
220. Xiong Zhang, Gengdong Cheng, Zhong You, Hui Zhang (2007). Energy absorption of axially compressed thin-walled square tubes with patterns. Thin-Walled Structures.DOI
221. Jun Yan, Gengdong Cheng, Ling Liu, Shutian Liu (2007). Concurrent material and structural optimization of hollow plate with truss-like material. Structural and Multidisciplinary Optimization.DOI
222. Ping Yi, Gengdong Cheng (2007). Further study on efficiency of sequential approximate programming for probabilistic structural design optimization. Structural and Multidisciplinary Optimization.DOI
223. Yulin Mei, Xiaoming Wang, Gengdong Cheng (2007). A feature-based topological optimization for structure design. Advances in Engineering Software.DOI
224. Gengdong Cheng (2007). Multifunctional design of sandwich panels with Kagome-like cores. Fuhe cailiao xuebao.
225. 杨迪雄，李刚，程耿东（2006）. 近断层地震动作用下基础隔震结构的一体化动力优化设计. 《建筑结构学报》.
226. 阎军，程耿东，刘岭，刘书田（2006）. 点阵材料微极连续介质模型的应力优化设计. 《力学学报》.
227. 李刚，杨迪雄，程耿东（2006）. 基于性能的隔震结构动力优化设计. 《大连理工大学学报》.
228. 亢战，程耿东（2006）. 非确定性结构静动态特性稳健优化设计. 《力学学报》.
229. 程耿东，许林（2006）. 基于可靠度的结构优化的序列近似规划算法. 《计算力学学报》.
230. 亢战，程耿东（2006）. 基于随机有限元的非线性结构稳健性优化设计. 《计算力学学报》.
231. 李海江，程耿东（2006）. 构建面向对象的并行有限元计算集群. 《计算力学学报》.
232. 许林，程耿东，易平（2006）. 利用系统可靠度约束下的优化设计求解公差分配问题. 《机械强度》.DOI
233. 杨迪雄，李刚，程耿东（2006）. 近断层地震动作用下隔震结构的优化设计. 《世界地震工程》.
234. Xiong Zhang, Gengdong Cheng (2006). A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns. International Journal of Impact Engineering.DOI
235. Xiong Zhang, Gengdong Cheng, Hui Fang Zhang (2006). Theoretical prediction and numerical simulation of multi-cell square thin-walled structures. Thin-Walled Structures.DOI
236. Ping Yi, Gengdong Cheng, Lei Jiang (2006). A sequential approximate programming strategy for performance-measure-based probabilistic structural design optimization. Structural Safety.DOI
237. Dixiong Yang, Gang Li, Gengdong Cheng (2006). On the efficiency of chaos optimization algorithms for global optimization. Chaos Solitons & Fractals.DOI
238. Gengdong Cheng, Lin Xu, Lei Jiang (2006). A sequential approximate programming strategy for reliability-based structural optimization. Computers & Structures.DOI
239. Dixiong Yang, Gang Li, Gengdong Cheng (2006). Convergence analysis of first order reliability method using chaos theory. Computers & Structures.DOI
240. Jun Yan, Gengdong Cheng, Shutian Liu, Ling Liu (2006). Comparison of prediction on effective elastic property and shape optimization of truss material with periodic microstructure. International Journal of Mechanical Sciences.DOI
241. Gengdong Cheng (2006). Integrated dynamic optimum design of base-isolated structure subjected to near-fault ground motions. Jianzhu jiegou xuebao.
242. Gengdong Cheng (2006). Optimum design of base-isolated structure subjected to near-fault ground motions. World Earthquake Engineering.
243. 杨迪雄，李刚，程耿东（2005）. 结构可靠度一次二阶矩法的混沌动力学分析. 《中国力学学会学术大会'2005》.
244. 易平，程耿东（2005）. 基于功能测度的概率结构优化设计的序列近似规划方法. 《中国力学学会学术大会'2005》.
245. 李海涛，程耿东，阮诗伦（2005）. 升船机系统在地震作用下的响应. 《大连理工大学学报》.
246. 李刚，程耿东（2005）. 基于投资-效益准则的结构目标性能水平. 《大连理工大学学报》.
247. 程耿东（2005）. 一部优秀的专著. 《工程力学》.
248. 程耿东，刘岭，阎军（2005）. 考虑随机因素的材料等效模量预测的一种有效实现. 《中国力学学会学术大会'2005论文摘要集（下）》.
249. 阎军，程耿东，刘书田，刘岭（2005）. 周期性点阵类桁架材料等效弹性性能预测及尺度效应. 《固体力学学报》.
250. 杨迪雄，李刚，程耿东（2005）. 近断层脉冲型地震动作用下隔震结构地震反应分析. 《地震工程与工程振动》.
251. 李志义，冯林，王殿龙，郑斯宁，程耿东（2005）. 改革人才培养模式培养高素质人才. 《中国大学教学》, No. 10.下载原文
252. 程耿东，顾诵芬 庄逢辰 程耿东 葛昌纯（2005）. 建议将航空工业作为国家重点发展的战略高技术产业. 《中国科学院院刊》, Vol. 20, No. 1.下载原文
253. Lin Xu, Gengdong Cheng, Ping Yi (2005). Tolerance synthesis by a new method for system reliability-based optimization. Engineering Optimization.DOI
254. Bo Wang, Gengdong Cheng (2005). Design of cellular structures for optimum efficiency of heat dissipation. Structural and Multidisciplinary Optimization.DOI
255. Xu Guo, Gengdong Cheng, N. Olhoff (2005). Optimum design of truss topology under buckling constraints. Structural and Multidisciplinary Optimization.DOI
256. Ioannis St. Doltsinis, Zhan Kang, Gengdong Cheng (2005). Robust design of non-linear structures using optimization methods. Computer Methods in Applied Mechanics and Engineering.DOI
257. 徐胜利，王博，程耿东（2004）. 多层桁架类夹层结构与蜂窝夹层结构的比较及优化. 《首届全国航空航天领域中的力学问题学术研讨会》.
258. 王博，程耿东（2004）. 考虑强度及散热性能的泡沫材料结构—材料协同优化设计. 《首届全国航空航天领域中的力学问题学术研讨会论文集（下册）》.
259. 李刚，杨迪雄，程耿东（2004）. 基于功能的基础隔震结构一体化优化设计. 《应用力学学报》.
260. 程耿东（2004）. 深化人事制度改革 促进高水平人才队伍建设. 《中国高等教育》.
261. Xu Guo, Gengdong Cheng (2004). Epsilon-continuation approach for truss topology optimization. Acta Mechanica Sinica.DOI
262. Xu Guo, Gengdong Cheng, Koetsu YAMAZAKI (2004). A note on stress-constrained truss topology optimization. Structural and Multidisciplinary Optimization.DOI
263. 杨迪雄，李刚，程耿东（2003）. 隔震结构的研究概况和主要问题. 《力学进展》.
264. 李刚，程耿东（2003）. 基于投资-效益准则的现有结构抗震加固策略. 《大连理工大学学报》.
265. 程耿东（2003）. 世界科技、经济中心的转移及留给我们的思考. 《科学中国人》.
266. G. Li, Gengdong Cheng (2003). Damage-reduction-based structural optimum design for seismic RC frames. Structural and Multidisciplinary Optimization.DOI
267. Gengdong Cheng (2003). STATE-OF-THE-ART AND MAIN PROBLEMS OF THE RESEARCH AND APPLICATIONS OF SEISMIC ISOLATED STRUCTURES. Lixue jinzhan.
268. 李刚，程耿东（2002）. 地震作用下钢筋混凝土框架层间变形概率统计特性. 《大连理工大学学报》.
269. 王健，程耿东（2002）. 具有应力和厚度约束的平面弹性体结构拓扑优化设计. 《机械科学与技术》.
270. 程耿东（2002）. 加入WTO后提高大连应对能力的几点建议. 《决策咨询》.
271. 程耿东，程耿东 沈宏书 徐循 贺明峰 郝云忱（2002）. 创新人才培养工程的探索与实践. 《国家教育行政学院学报》, No. 6.下载原文
272. Lin Xu, Gengdong Cheng (2002). Discussion on: moment methods for structural reliability. Structural Safety.DOI
273. S. T. Liu, Gengdong Cheng, Yingsong Gu, Xiaopeng Zheng (2002). Mapping method for sensitivity analysis of composite material property. Structural and Multidisciplinary Optimization.DOI
274. 李刚，程耿东（2001）. 灾害荷载下结构体系失效模式的相关性及可靠度计算. 《工程力学》.
275. 程耿东，李刚（2001）. 可靠度、优化和现代结构抗震设计哲理——第十届全国结构工程学术会议特邀报告. 《第十届全国结构工程学术会议论文集第Ⅰ卷》.
276. 李刚，程耿东（2001）. 钢筋混凝土框架发生局部破坏后抗震可靠度分析. 《大连理工大学学报》.
277. 郭东明，贾振元，王晓明，康德纯，王立鼎，程耿东（2001）. 理想材料零件的数字化设计制造方法及内涵. 《机械工程学报》.
278. 李刚，程耿东（2001）. 一种高效的结构可靠度近似分析方法. 《第十届全国结构工程学术会议》.
279. 程耿东（2001）. 积极发展研究生教育必须保证培养质量. 《中国高等教育》.
280. 程耿东（2001）. 中国高等教育迫切需要多样化. 《中国高等教育》.
281. 程耿东（2001）. 培养有创新精神的高素质人才. 《中国高校科技》.
282. 郭军，程耿东（2001）. 基于乘员风险期望值的混凝土护栏安全性能评估. 《中国公路学报》.
283. 高益荣，金连武，王守彬，程耿东（2001）. 人大代表谈“十五”. 《共产党员》.
284. 刘书田，郑新广，程耿东（2001）. 特定弹性性能材料的细观结构设计优化. 《复合材料学报》.
285. Xu Guo, Gengdong Cheng, Koetsu YAMAZAKI (2001). A new approach for the solution of singular optima in truss topology optimization with stress and local buckling constraints. Structural and Multidisciplinary Optimization.DOI
286. 程耿东，李刚（2000）. 基于功能的结构抗震设计中一些问题的探讨. 《建筑结构学报》.DOI
287. 程耿东（2000）. 关于桁架结构拓扑优化中的奇异最优解. 《大连理工大学学报》.
288. 李刚，程耿东（2000）. 基于分灾模式的高层结构抗震优化设计. 《大连理工大学学报》.
289. 陈振宇，程耿东，郭成安（2000）. 基于图形拓扑特征的工程图整体识别方法. 《计算机工程与科学》.
290. Guanlei Xu, Koetsu YAMAZAKI, Gengdong Cheng (2000). A new two-point approximation approach for structural optimization. Structural and Multidisciplinary Optimization.DOI
291. Hua Li, Gengdong Cheng (2000). New method for graded mesh generation of all hexahedral finite elements. Computers & Structures.DOI
292. Xu Guo, Gengdong Cheng (2000). An extrapolation approach for the solution of singular optima. Structural and Multidisciplinary Optimization.DOI
293. Zhenan Tang, Xikui Li, Gengdong Cheng, Philip C. H. Chan, J.K.O. Sin (2000). State-of-the-art in Micro-Hotplates. International Journal of Nonlinear Sciences and Numerical Simulation.DOI
294. 刘书田，程耿东，顾元宪，张金海，闫颂（1999）. 基于均匀化理论的多孔板弯曲问题新解法. 《固体力学学报》.
295. 刘书田，程耿东，顾元宪，郑新广（1999）. 特定弹性性能材料优化设计的形状优化方法. 《计算力学研究与进展——中国力学学会青年工作委员会第三届学术年会论文集》.
296. 钟万勰，程耿东（1999）. 跨世纪的中国计算力学. 《力学与实践》.
297. 程耿东（1999）. 切实抓好研究生培养质量努力提高学校整体水平. 《学位与研究生教育》, No. 2.下载原文
298. 程耿东，陈振宇（1999）. 基于节点区域分离的工程图纸整体识别方法. 《中国图象图形学报》.
299. 郭东明，王晓明，贾振元，程耿东（1999）. 理想材料零件数字化设计制造的理论和方法. 《中国科协首届学术年会》.
300. F. S. Chou, C.M. Wang, Gengdong Cheng, N. Olhoff (1999). OPTIMAL DESIGN OF INTERNAL RING SUPPORTS FOR VIBRATING CIRCULAR PLATES. Journal of Sound and Vibration.DOI
301. 程耿东，蔡悦，蔡文学（1998）. 基于可靠度的结构优化模型和“强柱弱梁”设计. 《大连理工大学学报》.
302. 李刚，程耿东（1998）. 基于分灾模式的结构防灾减灾设计概念的再思考. 《大连理工大学学报》.
303. 顾元宪，刘书田，关振群，程耿东（1998）. 面向设计的复合材料旋翼桨叶动力优化设计. 《航空学报》.
304. 程耿东，宋利民，亢战（1998）. 分段线性材料桁架的位移灵敏度. 《工程力学》.
305. 郭军，程耿东（1998）. 汽车碰撞砼护栏过程的简化分析. 《汽车工程》.
306. 蔡文学，程耿东（1998）. 桁架结构拓扑优化设计的模拟退火算法. 《华南理工大学学报(自然科学版)》.
307. Shutian Liu, Gengdong Cheng, Yuanxian Gu, Ramana V. Grandhi (1998). Prediction of thermo-elastic properties and optimal design of gradient materials. AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization (MA&O).DOI
308. Gengdong Cheng, G. Li, Yindi Cai (1998). Reliability-based structural optimization under hazard loads. Structural and Multidisciplinary Optimization.DOI
309. Gengdong Cheng, Xu Guo (1998). A NOTE ON A JELLYFISH-LIKE FEASIBLE DOMAIN IN STRUCTURAL TOPOLOGY OPTIMIZATION. Engineering Optimization.DOI
310. 李华，程耿东（1997）. 基于Auto CAD AME的规则二次曲面壳的全四边形网格自动剖分. 《大连理工大学学报》.
311. 刘书田，顾元宪，程耿东（1997）. 复合材料旋翼桨叶耦合振动分析. 《大连理工大学学报》.
312. 王健，程耿东（1997）. 应力约束下薄板结构的拓扑优化. 《固体力学学报》.
313. 程耿东，蔡文学（1997）. 结构可靠度计算的近似重要性抽样方法及其应用. 《工程力学》.
314. 刘书田，程耿东（1997）. 复合材料应力分析的均匀化方法. 《力学学报》.
315. 刘书田，顾元宪，程耿东（1997）. 陀螺系统特征值问题的对称解法. 《大连理工大学学报》.
316. 王健，张鲁邹，程耿东，郭旭（1997）. 应力约束下车架的结构拓扑优化设计. 《汽车工程》.
317. 刘书田，程耿东（1997）. 用均匀化方法预测单向纤维复合材料热膨胀行为. 《复合材料学报》.
318. Gengdong Cheng, Xu Guo (1997). ?-relaxed approach in structural topology optimization. Structural and Multidisciplinary Optimization.DOI
319. Gengdong Cheng, Zhan Kang, Gang Wang (1997). Dynamic optimization of a turbine foundation. Structural and Multidisciplinary Optimization.DOI
320. Gengdong Cheng, Pauli Pedersen (1997). On sufficiency conditions for optimal design based on extremum principles of mechanics. Journal of the Mechanics and Physics of Solids.DOI
321. 程耿东，蔡文学（1996）. 基于分灾模式的结构防灾减灾设计概念初探. 《自然灾害学报》.
322. Gengdong Cheng, Hua Li (1996). New method for graded mesh generation of quadrilateral finite elements. Computers & Structures.DOI
323. 顾元宪，程耿东，孙如林，樊光华，尹春望（1995）. 直升机旋翼结构优化设计研究综述. 《直升机技术》.
324. 钱令希，程耿东，隋允康，钟万勰，林家浩（1995）. 结构优化设计理论与方法的某些进展. 《自然科学进展》.
325. Gengdong Cheng (1995). Some aspects of truss topology optimization. Structural and Multidisciplinary Optimization.DOI
326. 刘书田，程耿东（1994）. 球形空心材料导热性能预测研究. 《大连理工大学学报》.
327. 程耿东，李华，顾元宪（1994）. 一种新的全四边形单元生成方法. 《第三届全国结构工程学术会议论文集（上）》.
328. Gengdong Cheng, Jiang Zheng (1994). Numerical performance of two formulations of truss topology optimization. Acta Mechanica Sinica.DOI
329. 程耿东（1993）. 计算力学学科发展刍议. 《计算力学学报》.
330. 程耿东，陈勤（1993）. 从CAD到ⅢCAD—智能CAD的实践、理论和展望. 《计算机辅助工程》.
331. F. S. Chou, C.M. Wang, Gengdong Cheng (1993). OPTIMAL BOUNDING OF CURVES BY CONTINUOUS PIECEWISE LINEAR FUNCTIONS. Engineering Optimization.DOI
332. Yong Zeng, Gengdong Cheng (1993). Knowledge‐Based Free Mesh Generation of Quadrilateral Elements in Two‐Dimensional Domains. Computer-Aided Civil and Infrastructure Engineering.DOI
333. Yuxi Gu, Gengdong Cheng (1993). Structural modelling and sensitivity analysis of shape optimization. Structural and Multidisciplinary Optimization.DOI
334. 程耿东，张东旭，顾元宪（1992）. 结构形状优化与智能模型化. 《应用力学学报》.
335. 程耿东，宋利民（1992）. 弹塑性离散结构的灵敏度分析. 《大连理工大学学报》.
336. 程耿东（1992）. 结构优化新方法及其计算机实现. 《力学与实践》.
337. Gengdong Cheng, Jiang Zheng (1992). STUDY ON TOPOLOGY OPTIMIZATION WITH STRESS CONSTRAINTS. Engineering Optimization.DOI
338. Dongxu Zhang, Gengdong Cheng, Yuanhan Gu (1992). Automatic generation of quadrilateral mapping elements and applicability of shape optimization software. Computers & Structures.DOI
339. Gengdong Cheng, Yong Zeng (1992). Strategies for automatic finite element modeling. Computers & Structures.DOI
340. Min Yan, Gengdong Cheng (1992). Image-based design model. Design Studies.DOI
341. 樊光华，侯汝良，程耿东，顾元宪（1991）. 复合材料旋翼桨叶的结构优化与振动控制. 《航空学报》.
342. 程耿东，顾元宪，彭传圣（1991）. 有限元网格自动生成系统MESHG. 《计算技术与自动化》.
343. 钟万勰，程耿东（1991）. 奇异控制正则化及刚度移置法. 《信息与控制》.
344. Yong Zeng, Gengdong Cheng (1991). On the logic of design. Design Studies.DOI
345. 程耿东，韩博平，顾元宪（1990）. 对CST单元采用半解析法计算灵敏度的误差分析. 《大连理工大学学报》.
346. 林树枝，程耿东（1990）. 动力响应灵敏度分析的振型空间法. 《地震工程与工程振动》.
347. Yuxi Gu, Gengdong Cheng (1990). Structural shape optimization integrated with CAD environment. Structural and Multidisciplinary Optimization.DOI
348. 刘扬，程耿东（1989）. N级星式网络的拓扑优化设计. 《大连理工大学学报》.
349. 程耿东，刘英卫（1989）. 梁的半解析法计算灵敏度的误差分析. 《大连理工大学学报》.
350. Pauli Pedersen, Gengdong Cheng, John O Rasmussen (1989). On Accuracy Problems for Semi-Analytical Sensitivity Analyses. Mechanics of Structures and Machines.DOI
351. Gengdong Cheng, Haitao Ma (1989). Optimal design of water distribution systems. Civil Engineering Systems.DOI
352. Wang Liu, Gengdong Cheng (1988). Shape optimization of a revolutional body and a quasi-analytic method of sensitivity analysis. Computers & Structures.DOI
353. 程耿东，王希诚，隋允康（1987）. 一类矩阵逆特征值问题的线性规划解法. 《振动与冲击》.
354. Gengdong Cheng, Yingwei Liu (1987). A NEW COMPUTATION SCHEME FOR SENSITIVITY ANALYSIS. Engineering Optimization.DOI
355. 钟万勰，程耿东（1986）. 多重特征值的敏度分析及优化算法. 《力学学报》.
356. 顾元宪，程耿东（1986）. 一种设计空间转换下的分级优化策略. 《应用力学学报》.
357. 程耿东，汪榴（1986）. 旋转体形状优化及敏度分析的拟解析法. 《大连理工大学学报》.
358. 程耿东（1986）. 国际讲座消息. 《计算力学学报》.
359. Zhong Wanxie, Gengdong Cheng (1986). Second-Order Sensitivity Analysis of Multimodal Eigenvalues and Related Optimization Techniques*. Mechanics Based Design of Structures and Machines.DOI
360. 程耿东（1985）. 关于复合材料方板对称性的讨论. 《力学与实践》.
361. 程耿东（1985）. 极限分析中新的下限定理的线性规划算法及其讨论. 《固体力学学报》.
362. 葛增杰，程耿东（1985）. 采用离散Kirchhoff假定的三角形板单元的稳定性分析. 《固体力学学报》.
363. 钟万勰，程耿东（1985）. 多重特征值的二阶敏度分析及相应的优化算法. 《大连理工大学学报》.
364. 程耿东（1984）. 可靠性最大的结构优化设计. 《计算力学学报》.
365. 程耿东（1984）. 连续体形状优化数值方法的若干改进. 《大连理工大学学报》.
366. 钱令希，钟万勰，程耿东，隋允康（1983）. 工程结构优化的序列二次规划. 《固体力学学报》.
367. 程耿东，丁桦（1983）. 关于铁木森柯梁动力优化的讨论. 《应用数学和力学》.
368. 程耿东（1983）. 应力比方法和圣文南原理. 《大连理工大学学报》.
369. 程耿东，钟万勰（1983）. 关于两端固定柱抗失稳优化问题的注记. 《力学学报》.
370. 程耿东（1983）. Duffin缩并公式的讨论. 《大连理工大学学报》.
371. 程耿东（1982）. 结构动力优化中规划法和准则法的统一. 《大连理工大学学报》.
372. 程耿东（1981）. 实心弹性薄板的最优设计. 《大连理工大学学报》.
373. 程耿东（1981）. 斜率受限制的实心弹性薄板最优设计. 《大连理工大学学报》.
374. 程耿东（1979）. 线性规划在结构优化设计中的一个应用及其稀疏算法. 《大连理工大学学报》.
375. 钟万勰，程耿东，裘春航（1978）. 群论在结构分析中的应用. 《大连理工大学学报》.
376. 钟万勰，程耿东，郑琳，胡云程（1978）. 钢筋混凝土支架式水塔支架内力计算. 《大连理工大学学报》.

书籍章节

1. Xu Guo, Gengdong Cheng, Wing-Kam Liu (2017). Summary of Group Discussions. SpringerBriefs in applied sciences and technology.DOI
2. Xu Ming Guo, Gengdong Cheng, Wing-Kam Liu (2017). Theoretical Understanding of Material Science and Mechanics in Additive Manufacturing. SpringerBriefs in applied sciences and technology.DOI
3. Xu Guo, Gengdong Cheng, Wing-Kam Liu (2017). Theory, Methods and Tools for Additive Manufacturing Oriented Design and Optimization. SpringerBriefs in applied sciences and technology.DOI
4. Xu Ming Guo, Gengdong Cheng, Wing-Kam Liu (2017). Additive Manufacturing Experimental Methods and Results, and Additive Manufacturing Scalability. SpringerBriefs in applied sciences and technology.DOI
5. Xu Ming Guo, Gengdong Cheng, Wing-Kam Liu (2017). Computational and Analytical Methods in Additive Manufacturing. SpringerBriefs in applied sciences and technology.DOI
6. Gengdong Cheng, Jun Yan (2011). STUDY ON TWO SCALE DESIGN OPTIMIZATION OF STRUCTURES AND MATERIALS WITH PERIODIC MICROSTRUCTURE. WORLD SCIENTIFIC eBooks.DOI
7. Gengdong Cheng, Yulin Mei, Xiaoming Wang (2006). A Feature-Based Structural Topology Optimization Method. Springer eBooks.DOI
8. Bo Wang, Gengdong Cheng (2006). Design of Cellular Structure for Optimum Efficiency of Heat Dissipation. Springer eBooks.DOI
9. Lin Xu, Gengdong Cheng (2003). A mono-level iterative approach to optimum design under system reliability constraint. Elsevier eBooks.DOI
10. Xu Guo, Gengdong Cheng (1999). ɛ-CONTINUATION APPROACH FOR TRUSS TOPOLOGY OPTIMIZATION. Elsevier eBooks.DOI
11. Shutian Liu, Yuanxian Gu, Gengdong Cheng (1999). Design of Materials with Specific Elastic Properties using Shape Optimization Method. Springer eBooks.DOI
12. Gengdong Cheng, Niels Olhoff (1993). New Method of Error Analysis and Detection in Semi-Analytical Sensitivity Analysis. Springer eBooks.DOI
13. Gengdong Cheng, Jun Hu Tang (1993). OPTIMUM DESIGN OF LAMINATED PLATES WITH RESPECT TO EIGENVALUES. Elsevier eBooks.DOI
14. Gengdong Cheng, Yuanxian Gu, Xicheng Wang (1991). Improvement of Semi-Analytic Sensitivity Analysis and MCADS. Lecture notes in engineering.DOI
15. Yuanxian Gu, Gengdong Cheng (1991). Engineering Oriented Approaches of Structural Shape Optimization. Lecture notes in engineering.DOI
16. Gengdong Cheng, Biao Fu (1988). Shape Optimization of Continuum with Crack. Structural Optimization.DOI

书籍

1. Jun Yan, Gengdong Cheng (2019). Multiscale Optimization and Materials Design. Frontier research in computation and mechanics of materials and biology.DOI
2. Xu Guo, Gengdong Cheng, Wing-Kam Liu (2017). Report of the Workshop Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing (WAM 2016). SpringerBriefs in applied sciences and technology.DOI